Commit graph

259 commits

Author SHA1 Message Date
Tom Rini
0613c36a7a global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00
Tom Rini
218ce3695b global: Remove undef CONFIG_... for unused values
We have a number of places that undef CONFIG_... while we never
reference CONFIG_... in the first place. Remove these lines.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:07:03 -05:00
Tom Rini
829e9d2236 ddr: fsl: Remove CONFIG_MEM_INIT_VALUE
The way all of the memory init code here works is that we pass
0xDEADBEEF around for the initial value (as it's a well known 'poison'
value and so easily recognized in debuggers, etc). The only point of
this CONFIG symbol was to pass in a different value for that purpose.
Drop this symbol and cleanup the code slightly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
960379d450 Convert CONFIG_L2_CACHE to Kconfig
This converts the following to Kconfig:
   CONFIG_L2_CACHE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
308520b8f2 global: Remove unused CONFIG symbols
This removes the following unreferenced CONFIG symbols:
   CONFIG_FDTADDR
   CONFIG_FDTFILE
   CONFIG_FLASH_SECTOR_SIZE
   CONFIG_FSL_CPLD
   CONFIG_HDMI_ENCODER_I2C_ADDR
   CONFIG_I2C_MVTWSI
   CONFIG_I2C_RTC_ADDR
   CONFIG_IRAM_END
   CONFIG_IRAM_SIZE
   CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
   CONFIG_L1_INIT_RAM
   CONFIG_MACB_SEARCH_PHY
   CONFIG_MIU_2BIT_21_7_INTERLEAVED
   CONFIG_MTD_NAND_VERIFY_WRITE
   CONFIG_MVGBE_PORTS
   CONFIG_NETDEV
   CONFIG_NUM_DSP_CPUS
   CONFIG_PHY_BASE_ADR
   CONFIG_PHY_INTERFACE_MODE
   CONFIG_PSRAM_SCFG
   CONFIG_RAMBOOT_SPIFLASH
   CONFIG_RAMBOOT_TEXT_BASE
   CONFIG_RD_LVL
   CONFIG_ROCKCHIP_SDHCI_MAX_FREQ
   CONFIG_SETUP_INITRD_TAG
   CONFIG_SH_QSPI_BASE
   CONFIG_SMDK5420
   CONFIG_SOCRATES
   CONFIG_SPI_ADDR
   CONFIG_SPI_FLASH_QUAD
   CONFIG_SPI_FLASH_SIZE
   CONFIG_SPI_HALF_DUPLEX
   CONFIG_SPI_N25Q256A_RESET
   CONFIG_TEGRA_SLINK_CTRLS
   CONFIG_TPM_TIS_BASE_ADDRESS
   CONFIG_UBOOT_SECTOR_COUNT
   CONFIG_UBOOT_SECTOR_START
   CONFIG_VAR_SIZE_SPL
   CONFIG_VERY_BIG_RAM

And also:
   BL1_SIZE
   PHY_NO
   RESERVE_BLOCK_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
54f80dd290 Convert CONFIG_HOSTNAME et al to Kconfig
This converts the following to Kconfig:
   CONFIG_GATEWAYIP
   CONFIG_HOSTNAME
   CONFIG_IPADDR
   CONFIG_NETMASK
   CONFIG_ROOTPATH
   CONFIG_SERVERIP
   CONFIG_UBOOTPATH

To do this, we introduce a CONFIG_USE_ form of each of the above and
change include/env_default.h to test for that to be set before setting a
value. Further, we don't want to stringify the IP address related values
as they are now properly strings via Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
98fbad631f Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_SHOW_PROGRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
2f420f135f net: tsec: Remove non-DM_ETH support code
As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.  Doing this removes some board support code
which was also unused. Finally, this removes some CONFIG symbols that
otherwise needed to be migrated to Kconfig, but were unused in code now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00
Tom Rini
17f13e7119 scripts/config_whitelist.txt: Remove more referenced symbols
Perform some deeper investigation on the remaining symbols listed in
this file and remove more.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:11:50 -05:00
Tom Rini
ea467ea1cd Convert CONFIG_RTC_DS1337 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_RTC_DS1337
   CONFIG_RTC_DS1337_NOOSC
   CONFIG_RTC_DS1338
   CONFIG_RTC_DS1374
   CONFIG_RTC_DS3231
   CONFIG_RTC_MC13XXX
   CONFIG_RTC_MXS
   CONFIG_RTC_PT7C4338

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:08:37 -05:00
Tom Rini
19b4040df0 Convert CONFIG_HWCONFIG to Kconfig
This converts the following to Kconfig:
   CONFIG_HWCONFIG

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:07:12 -05:00
Tom Rini
65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00
Tom Rini
aa6e94deab global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
ecc8d425fd global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and
CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many
cases they likely should come from the device tree instead. Move these
out of CONFIG namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
91092132ba global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:07 -05:00
Tom Rini
9591b63531 Convert CONFIG_SYS_NS16550_MEM32 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NS16550_MIN_FUNCTIONS
   CONFIG_SYS_NS16550_MEM32
   CONFIG_SYS_NS16550_PORT_MAPPED
   CONFIG_SYS_NS16550_REG_SIZE
   CONFIG_SYS_NS16550_SERIAL

To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that
platforms can enable the legacy driver here for SPL.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05 16:06:07 -05:00
Tom Rini
57c3afbc27 powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONS
This symbol is specific to the PowerPC SPL implementation, so rename
this to reflect that it's in SPL and used / tested there, so that we can
then safely migrate it to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
0ed384fd2f global: Move remaining CONFIG_SYS_NOR_* to CFG_SYS_NOR_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
4e5909450e global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
50493dd1f9 Remove unused symbols
This commit removes the following unused symbols:
   CONFIG_SYS_NAND_DDR_LAW
   CONFIG_SYS_NAND_ECCSTEPS
   CONFIG_SYS_NAND_ECCTOTAL
   CONFIG_SYS_NAND_ENABLE_PIN_SPL
   CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
   CONFIG_SYS_NAND_U_BOOT_RELOC_SP

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:05:38 -05:00
Tom Rini
6cc04547cb global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
5155207ae1 global: Migrate CONFIG_SYS_MPC8* symbols to the CFG_SYS namespace
Migrate all of COFIG_SYS_MPC* to the CFG_SYS namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-10 10:08:55 -05:00
Tom Rini
08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00
Tom Rini
a918df21f0 Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAX_NAND_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:54 -05:00
Tom Rini
2c8d04dd17 Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_LOADS_BAUD_CHANGE
   CONFIG_LOADS_ECHO

As part of this, we move CMD_SAVES to be after CMD_LOADS as they are
logically related (load or save an s-record format file) and this makes
grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
22a2283f2d powerpc: Migrate SYS_L2_SIZE to Kconfig
Introduce two options, one for each observed L2 cache size, and have the
size select'd as needed.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:54 -05:00
Tom Rini
d3d0b5bb62 Convert CONFIG_SYS_INIT_RAM_LOCK to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_INIT_RAM_LOCK

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 09:45:53 -05:00
Tom Rini
adf13bcc40 Convert CONFIG_SYS_I2C_EEPROM_CCID et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_I2C_EEPROM_CCID
   CONFIG_SYS_I2C_EEPROM_NXID
   CONFIG_SYS_EEPROM_BUS_NUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-01 17:18:42 -04:00
Tom Rini
1107dad820 Convert CONFIG_SYS_FLASH_QUIET_TEST to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_QUIET_TEST

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
1db251bdd5 Convert CONFIG_SYS_MAX_FLASH_SECT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MAX_FLASH_SECT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
5d68d2f41d Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_ERASE_TOUT
   CONFIG_SYS_FLASH_LOCK_TOUT
   CONFIG_SYS_FLASH_UNLOCK_TOUT
   CONFIG_SYS_FLASH_WRITE_TOUT

In practice, for two m68k platforms we move to hard-coding with a
comment the timeout values, rather than try and make convoluted Kconfig
logic.  We add options for the write and erase options to the pic32
flash driver, as this driver does make use of them.  Everywhere else
these are unreferenced values.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
90e9b3d335 Convert CONFIG_SYS_FLASH_CHECKSUM to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_CHECKSUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
e2eca3e5c2 P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMING
All platforms today define CONFIG_SYS_DDR_RAW_TIMING, so drop the code
for this option being unset.

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
b72713dc0b Convert CONFIG_SYS_FLASH_EMPTY_INFO to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FLASH_EMPTY_INFO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04 16:18:47 -04:00
Tom Rini
07ef80cd9d powerpc: Use the poison value of 0xdeadbeef directly in DDR init
On p1_p2_rdb_pc platforms, we set ddr_data_init to the "poison" value of
0xdeadbeef rather than a real calculated / derived value.  Do this
directly and comment rather than via CONFIG.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08 17:57:34 -04:00
Tom Rini
c45568cc4e Convert CONFIG_SYS_BOOTM_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch <smoch@web.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:09 -04:00
Tom Rini
5a4461867c Convert CONFIG_SYS_RAMBOOT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_RAMBOOT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07 14:01:08 -04:00
Tom Rini
f27bca4c27 Convert CONFIG_PCI_SCAN_SHOW to Kconfig
This converts the following to Kconfig:
   CONFIG_PCI_SCAN_SHOW

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
3dc2987f5c Convert CONFIG_PCIE1 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PCIE1
   CONFIG_PCIE2
   CONFIG_PCIE3
   CONFIG_PCIE4
   CONFIG_PCI1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:59 -04:00
Tom Rini
d8e8461709 Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_FIXED_MMC_LOCATION
   CONFIG_ESDHC_HC_BLK_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:40 -04:00
Tom Rini
f4cd75e96a powerpc: Clean up CHAIN_OF_TRUST related options
As things stand currently, there is only one PowerPC platform that
enables the options for CHAIN_OF_TRUST.  From the board header files,
remove a number of never-set options.  Remove board specific values from
arch/powerpc/include/asm/fsl_secure_boot.h as well.  Rework
include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for
constructing CHAIN_BOOT_CMD.  Migrate all of the configurable addresses
to Kconfig.

If any platforms are re-introduced with secure boot support, everything
required should still be here, but now in Kconfig, or requires migration
of an option to Kconfig.

Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:04:15 -04:00
Tom Rini
c24e8e2bb3 Convert CONFIG_SYS_DDR_RAW_TIMING to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DDR_RAW_TIMING

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
bca4509d57 Convert CONFIG_SYS_SPD_BUS_NUM to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_SPD_BUS_NUM

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
fbc3621fb5 Convert CONFIG_ENABLE_36BIT_PHYS to Kconfig
This converts the following to Kconfig:
   CONFIG_ENABLE_36BIT_PHYS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05 17:03:01 -04:00
Tom Rini
5d7dea1400 Convert CONFIG_ENV_RANGE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_RANGE

Now that this is in Kconfig we can enforce a minimum size and so remove
the check in C code to ensure range is larger than size.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
de47ff5363 Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MPC85XX_NO_RESETVEC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:11:48 -04:00
Tom Rini
aca1f6789a Convert CONFIG_LBA48 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LBA48
   CONFIG_SYS_64BIT_LBA

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:32 -04:00
Tom Rini
0a816d92d5 Convert CONFIG_FSL_SATA_V2 to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_SATA_V2

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
21af94f882 ata: fsl_sata: Remove legacy non-BLK code
The migration deadline for this has passed and all boards have been
updated, remove this legacy code and references for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00
Tom Rini
5cc1d9214a Convert CONFIG_HAS_FSL_DR_USB to Kconfig
This converts the following to Kconfig:
   CONFIG_HAS_FSL_DR_USB

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28 17:03:31 -04:00