Commit graph

2011 commits

Author SHA1 Message Date
Masahiro Yamada
e312e745db arm64: thunderx_88xx_defconfig: remove unneeded CONFIG_SYS_EXTRA_OPTIONS
ARM64 is correctly select'ed in arch/arm/Kconfig, so this line in
the defconfig is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-25 12:05:56 -04:00
Ladislav Michl
4b9dc7c26b igep00x0: UBIize
Convert IGEP board to use UBI volumes for U-Boot, its environment and
kernel. With exception of first four sectors read by SoC boot
ROM whole (One)NAND is UBI managed.
Also merge NAND and OneNAND defconfigs as now one binary can serve
both flashes.
As code is too big now, drop CONFIG_SPL_EXT_SUPPORT to make it fit.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-07-22 14:46:18 -04:00
Tom Rini
9f03247edc Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-07-22 09:22:26 -04:00
Siva Durga Prasad Paladugu
766d2609dd zynq: defconfig: Remove unnecessary board specific config files
Remove unnecessary board specifc config files for
zynq boards(microzed, picozed, ZC770(all), zed) and point
to zynq common config file.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 15:16:43 +02:00
Siva Durga Prasad Paladugu
05f4cc344f zynq: config: Enable CONFIG_SYS_NO_FLASH through defconfig
Enable config CONFIG_SYS_NO_FLASH through defconfig
for all zynq boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:06:11 +02:00
Siva Durga Prasad Paladugu
2ae9fbe00f usb: zynq: Define config USB_STORAGE through defconfig
Define config USB_STORAGE through defconfig for all
respective zynq boards

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:06:11 +02:00
Siva Durga Prasad Paladugu
2cdc778b62 usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ
Add Kconfig entry config option for USB_EHCI_ZYNQ
and update the same to enable for all zynq boards
which supports USB

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:06:11 +02:00
Michal Simek
f3d1cc2ff3 ARM64: zynqmp: Enable SPL for all zynqmp boards
Compile SPL for all boards even psu_init.c/h files are not in the tree
yet. But this change enables covering SPL issues in mainline.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:04:35 +02:00
Michal Simek
1f29738ad1 ARM64: zynqmp: Enable CLK and SPL_CLK by default
Serial driver starts to use clk framework that's why
enable it by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:03:54 +02:00
Michal Simek
72d8d5d773 ARM: zynq/zynqmp: Use the default CONFIG_BOOTDELAY=2
Based on:
"ARM: uniphier: use the default CONFIG_BOOTDELAY=2"
(sha1: 7c8ef0feb9)

"I do not insist on CONFIG_BOOTDELAY=3. The default value in Kconfig,
CONFIG_BOOTDELAY=2, is just fine for these boards."

Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 13:35:54 +02:00
Tom Rini
89ca873e2d Merge git://git.denx.de/u-boot-mpc85xx 2016-07-21 20:20:00 -04:00
Sumit Garg
aa36c84edf powerpc/mpc85xx: T104x: Add nand secure boot target
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In non-secure boot scenario from NAND, this address will map to CPC
configured as SRAM. But in case of secure boot, this default address
always maps to IBR (Internal Boot ROM).
The IBR code requires that the bootloader(U-boot) must lie in 0 to 3.5G
address space i.e. 0x0 - 0xDFFFFFFF.

For secure boot target from NAND, the text base for SPL is kept same as
non-secure boot target i.e. 0xFFFx_xxxx but the SPL U-boot binary will
be copied to CPC configured as SRAM with address in 0-3.5G(0xBFFC_0000)
As a the virtual and physical address of CPC would be different. The
virtual address 0xFFFx_xxxx needs to be mapped to physical address
0xBFFx_xxxx.

Create a new PBI file to configure CPC as SRAM with address 0xBFFC0000
and update DCFG SCRTACH1 register with location of Header required for
secure boot.

The changes are similar to
commit 467a40dfe3
    powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041

While P3041 has a 1MB CPC and does not require SPL. On T104x, CPC
is only 256K and thus SPL framework is used.
The changes are only applicable for SPL U-Boot running out of CPC SRAM
and not the next level U-Boot loaded on DDR.

Reviewed-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-21 11:09:34 -07:00
Stephen Warren
1f60f0731d ARM: tegra: split p2771-0000 build
There are multiple versions of p2771-0000 board. There are SW visible
incompatible differences between the versions, and they are relevant to
U-Boot. Create separate "A02" and "B00" defconfigs (named after the first
and/or only board rev the defconfig supports) so that users can select
which build they want.

With the minimal set of HW currently enabled in U-Boot, the differences
are irrelevant, hence the DT files aren't different. However, that will
change in a future patch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-07-21 09:31:30 -07:00
Stefan Agner
be1a17ff68 mx7_common: use Kconfig for ARMv7 non-secure mode
Use existing Kconfig symbols to let the user configure whether to
build a U-Boot with non-secure mode support or not. This also allows
to enable virtualization extension easily.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-19 19:52:15 +02:00
Stefan Agner
c4483093f3 usb: ehci-mx6: introduce config for high active power pin
Add a new config CONFIG_MXC_USB_OTG_HACTIVE which configures the
OTG Power Pin to be high active. Low active is the reset value
of the affected configuration register, hence the config option
is named by the non-reset configuration.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-19 19:52:14 +02:00
Stefan Agner
2deebe2481 usb: move CONFIG_USB_EHCI_MX7 to Kconfig
Create an entry for "config USB_EHCI_MX7" in Kconfig and
switch over to it for all boards.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-19 19:52:14 +02:00
Breno Lima
4beba06688 warp7: Remove CONFIG_BOOTDELAY variable
It's not necessary anymore to declare the CONFIG_BOOTDELAY variable,
it's already set by default as 2 seconds.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-19 19:52:13 +02:00
Tom Rini
1f9ef0dca0 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-07-15 10:44:01 -04:00
Hans de Goede
66ab528673 sunxi: Add defconfig and dts file for the Orange Pi Lite SBC
The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM,
micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector,
sdio attached rtl8189ftv wifi and an ir receiver.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-15 15:54:56 +02:00
Hans de Goede
74fcc927f6 sunxi: orangepi_pc: Add support for eMMC found on the Orange Pi PC Plus
The Plus variant of the Orange Pi PC has an eMMC, add support for this.

Note we are using the same u-boot defconfig / dts for both the regular
Orange Pi PC as well as the Orange Pi PC Plus.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-15 15:54:56 +02:00
Tom Rini
ebe621d5fb Merge git://git.denx.de/u-boot-dm 2016-07-15 08:06:22 -04:00
Amit Singh Tomar
a29710c525 net: Add EMAC driver for H3/A83T/A64 SoCs.
This patch add EMAC driver support for H3/A83T/A64 SoCs.
Tested on Pine64(A64-External PHY) and Orangepipc(H3-Internal PHY).

BIG Thanks to Andre for providing some of the DT code.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-15 08:34:34 +02:00
Simon Glass
97feca3325 rockchip: Use of-platdata for firefly-rk3288
As an experiment, move this board over to use of-platdata. This means that
its SPL configuration will come from C structures generated at build-time
from the device tree, instead of coming from the device tree at run-time.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
3949a413ed dm: sandbox: Enable of-platdata for sandbox_spl
Enable this feature so that we can use it for testing in sandbox_spl.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
8797b2cae3 sandbox: Add a new sandbox_spl board
It is useful to be able to build SPL for sandbox. It provides additional
build coverage and allows SPL features to be tested in sandbox. However
it does not need worthwhile to always create an SPL build. It nearly
doubles the build time and the feature is (so far) seldom used.

So for now, create a separate build target for sandbox SPL. This allows
experimentation with this new feature without impacting existing workflows.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Sekhar Nori
0ec807b2d8 configs: da850evm: enable bootz command
Enable bootz command on Texas Instruments DA850 EVM
board. This helps it boot zImage with device-tree
blob passed.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
2016-07-14 18:22:45 -04:00
Madan Srinivas
e29878fc47 arm: am4x: add U-Boot FIT signing and SPL image post-processing
Modify the SPL build procedure for AM437x high-security (HS) device
variants to create a secure u-boot_HS.img FIT blob that contains U-Boot
and DTB artifacts signed (and optionally encrypted) with a TI-specific
process based on the CONFIG_TI_SECURE_DEVICE config option and the
externally-provided image signing tool.

Also populate the corresponding FIT image post processing call to be
performed during SPL runtime.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14 18:22:23 -04:00
Andreas Dannenberg
17c2987336 arm: omap5: add U-Boot FIT signing and SPL image post-processing
Modify the SPL build procedure for AM57xx and DRA7xx high-security (HS)
device variants to create a secure u-boot_HS.img FIT blob that contains
U-Boot and DTB artifacts signed with a TI-specific process based on the
CONFIG_TI_SECURE_DEVICE config option and the externally-provided image
signing tool.

Also populate the corresponding FIT image post processing call to be
performed during SPL runtime.

Signed-off-by: Daniel Allred <d-allred@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-14 18:22:22 -04:00
Vanessa Maegima
af07d1544e pico-imx6ul: Add DFU support
DFU is a convenient way to program U-boot binary into the eMMC.

Add support for it.

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:49 +02:00
Fabio Estevam
618a85356c mx7dsabresd: Fix the boot of a NXP kernel
Booting a NXP kernel with mainline U-boot leads to the following kernel
crash:

caam: probe of 30900000.caam failed with error -11
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = 80004000
[00000004] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM

This happens because NXP kernel expects MX7 to boot in secure mode,
so introduce mx7dsabresd_secure_defconfig that selects CONFIG_MX7_SEC
and allows booting a NXP provided kernel successfully.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:49 +02:00
Stefano Babic
876a25d289 mx6: Add Phytec PCM058 i.MX6 Quad
Add Phytec-i.MX6 SOM with NAND

  Support:
   - 1GB RAM
   - Ethernet
   - SPI-NOR Flash
   - NAND (1024 MB)
   - external SD
   - UART

Signed-off-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-12 17:58:48 +02:00
Stefano Babic
8be4f40ecf mx6: add support for el6x board
Custom Board based on MX6 Dual, 1GB RAM and eMMC.

There are two variants of the board with and without
PCIe (ZC5202 and ZC5601).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-07-12 17:58:48 +02:00
Tom Rini
b8e599746c Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-07-12 08:15:17 -04:00
George McCollister
215099a522 x86: Add Advantech SOM-DB5800/SOM-6867 support
Add support for Advantech SOM-DB5800 with the SOM-6867 installed.
This is very similar to conga-qeval20-qa3-e3845 in that there is a
reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867)
installed.

Currently supported:
 - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on
   SOM-DB5800.
 - 4x USB 2.0 (EHCI)
 - Video
 - SATA
 - Ethernet
 - PCIe
 - Realtek ALC892 HD Audio
   Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO
   HDA_SDI0 is set in DT to enable HD Audio codec.
   Pin defaults for codec pin complexs are not changed.

Not supported:
 - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500)
 - USB 3.0 (XHCI)
 - TPM

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-07-12 13:46:01 +08:00
Stefan Roese
f2a751beba x86: conga-qeval20-qa3: Add support for internal UART
This patch adds support to enable and use the internal BayTrail UART
instead of the one integrated in the Super IO Winbond chip. For this,
a 2nd defconfig file is added.

This is useful for tests done for the congatec SoM used on baseboards
without such a Super IO chip.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12 13:46:01 +08:00
Bin Meng
377656b2cc x86: baytrail: Introduce a Kconfig option for the internal UART
There are quite a number of BayTrail boards that uses an external
SuperIO chipset to provide the legacy UART. For such cases, it's
better to have a Kconfig option to enable the internal UART.

So far BayleyBay and MinnowMax boards are using internal UART as
the U-Boot console, enable this on these two boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-12 13:46:01 +08:00
Tom Rini
bff97dde8c Merge branch 'master' of git://git.denx.de/u-boot-spi 2016-07-11 18:50:29 -04:00
Simon Glass
91cbc3f568 dm: mmc: Move dragonboard410c to use CONFIG_BLK and CONFIG_DM_MMC_OPS
Update this board to use driver model for block devices and MMC operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
9a46bd3feb dm: sandbox: Convert to use CONFIG_CMD_MMC_OPS
Update the sandbox MMC emulation to use driver model for MMC operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Vignesh R
988fb5ce61 defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller
Enable Cadence QSPI controller support to use QSPI on K2G SoC. Also
enable Spansion flash support to access s25fl512s flash present on K2G
QSPI bus.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-09 20:16:33 +05:30
Vignesh R
fdf02a36c5 defconfig: k2g_evm_defconfig: enable SPI driver model
Enable SPI and SPI Flash driver model as K2G SPI controller driver
supports driver model.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-09 20:16:32 +05:30
Vignesh R
c48f879c38 defconfig: k2l_evm_defconfig: enable SPI driver model
Enable SPI and SPI Flash driver model as K2L SPI controller driver
supports driver model.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-09 20:16:32 +05:30
Vignesh R
cf4f0a9afc defconfig: k2e_evm_defconfig: enable SPI driver model
Enable SPI and SPI Flash driver model as K2E SPI controller driver
supports driver model.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-09 20:16:31 +05:30
Vignesh R
376c533b89 defconfig: k2hk_evm_defconfig: enable SPI driver model
Enable SPI and SPI Flash driver model as K2HK SPI controller driver
supports driver model.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-09 20:16:31 +05:30
Simon Glass
ec5507707a video: tegra: Move to using simple-panel and pwm-backlight
We have standard drivers for panels and backlights which can do most of the
work for us. Move the tegra20 LCD driver over to use those instead of custom
code.

This patch includes device tree changes for the nvidia boards. I have only
been able to test seaboard. If this patch is applied, these boards will
also need to be synced with the kernel, and updated to use display-timings:

   - colibri
   - medcom-wide
   - paz00
   - tec

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-07-05 13:19:08 -07:00
Quentin Schulz
d2a6af0528 sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)
The Parrot Board is an evaluation board with an Allwinner R16 (assumed
to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host
and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2
controllable buttons, an LVDS port with separated backlight and
capacitive touch panel ports, an audio/microphone jack, a camera CSI
port, 2 sets of 22 GPIOs and an accelerometer.

The DTS file is identical to the one submitted to the upstream kernel.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-02 13:53:15 +02:00
Masahiro Yamada
2fbb8462b0 autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK
As the help message of CONFIG_BOOTDELAY says, CONFIG_BOOTDELAY=-2
means the autoboot with no delay, with no abort check even if
CONFIG_ZERO_BOOTDELAY_CHECK is defined.

To sum up, the autoboot behaves as follows:

 [1] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=y
    autoboot with no delay, but you can abort it by key input

 [2] CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    autoboot with no delay, with no check for abort

 [3] CONFIG_BOOTDELAY=-1
    disable autoboot

 [4] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

As you notice, [2] and [4] come to the same result, which means we
do not need CONFIG_ZERO_BOOTDELAY_CHECK.  We can control all the
cases only by CONFIG_BOOTDELAY, like this:

 [1] CONFIG_BOOTDELAY=0
    autoboot with no delay, but you can abort it by key input

 [2] CONFIG_BOOTDELAY=-1
    disable autoboot

 [3] CONFIG_BOOTDELAY=-2
    autoboot with no delay, with no check for abort

This commit converts the logic as follow:
  CONFIG_BOOTDELAY=0 && CONFIG_ZERO_BOOTDELAY_CHECK=n
    --> CONFIG_BOOTDELAY=-2

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Christian Riesch <christian.riesch@omicronenergy.com>
Acked-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2016-07-01 17:42:55 -04:00
Masahiro Yamada
ea72ee72f2 ARM: socfpga: move CONFIG_BOOTDELAY to Kconfig for IS1 board
This recently added board missed the tree-wide migration of
CONFIG_BOOTDELAY.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2016-07-01 17:42:54 -04:00
Andreas Dannenberg
4aae64c22a ARM: AM437x: Align HS device variant defconfig filename
Align the name of the defconfig file for high-security (HS) device variants
from the AM43xx family of SoCs with the corresponding name used for the
general purpose devices. This allows for easier cross-association of those
files and also provides room to grow from an HS device part number
perspective.

Furthermore, update and cleanup associated MAINTAINERS file.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Madan Srinivas <madans@ti.com>
2016-07-01 17:42:53 -04:00
Tom Rini
6f0aea39ae configs: Re-sync after boot menu changes
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-28 15:54:00 -04:00
Heiko Schocher
8e6e8221c7 arm: at91: taurus/axm: add DM and DTS support
add DM and DTS support for the at91 based siemens
boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebased on current ToT]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26 20:17:22 +02:00
Heiko Schocher
13ee789074 arm: at91: smartweb: add DM and DTS support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebased on current ToT]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26 20:17:22 +02:00
Heiko Schocher
289f979cc9 corvus DTS / DM support
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebase on current ToT, don't delete gurnard DTB creation]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-26 20:17:22 +02:00
Hannes Schmelzer
a4d799939f board/BuR: rename kwb board to brxre1
Rename B&R kwb board to brxre1

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24 17:24:40 -04:00
Hannes Schmelzer
2290fe0642 board/BuR: rename tseries board to brppt1
Rename B&R tseries board to brppt1

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-24 17:24:39 -04:00
Steve Rae
9d7f416ced arm: bcm235xx: implement the boot0 hook code
Choose the Kconfig boot0 hook option and implement the required code.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24 17:24:37 -04:00
Steve Rae
202b84ae59 arm: bcm235xx: choose 8-bit phy bus width
The Kona PHY supports an 8-bit wide UTMI interface,
therefore, choose this Kconfig setting.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-24 17:24:36 -04:00
Masahiro Yamada
b88d6f7614 Move CONFIG_SYS_HUSH_PARSER to Kconfig for last 4 boards
I still see some defines of this config in board headers.  Move them
to defconfigs (+ renaming to CONFIG_HUSH_PARSER) to complete this
migration.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-24 17:24:33 -04:00
Hans de Goede
3551b24f53 sunxi: Add defconfig and dts file for inet86dz board
The inet86dz board is a board used in 7" tablets from various oems.

These tablets are a23 based 7" tablets featuring a 1024x600 LCD,
512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen,
micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector
which doubles as charging port.

The dts file this commit adds is identical to the one submitted to
the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-06-20 22:43:59 +02:00
Hans de Goede
cd38e3d1b4 sunxi: Add defconfig and dts file for Polaroid MID2407PXE03 tablet
The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0
PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680
touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg
connector which doubles as charging port.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-06-20 22:43:59 +02:00
Masahiro Yamada
41598c8251 autoboot: add CONFIG_AUTOBOOT to allow to not compile autoboot.c
Since commit bb597c0eeb ("common: bootdelay: move CONFIG_BOOTDELAY
into a Kconfig option"), CONFIG_BOOTDELAY is defined for all boards.

Prior to that commit, it was allowed to unset CONFIG_BOOTDELAY to
not compile common/autoboot.c, as described in common/Makefile:

  # This option is not just y/n - it can have a numeric value
  ifdef CONFIG_BOOTDELAY
  obj-y += autoboot.o
  endif

It was a bit odd to enable/disable code with an integer type option,
but it was how this option worked before that commit, and several
boards actually unset it to opt out of the autoboot feature.

This commit adds a new bool option, CONFIG_AUTOBOOT, and makes
CONFIG_BOOTDELAY depend on it.

I chose "default y" for this option because most boards use the
autoboot.  I added "# CONFIG_AUTOBOOT is not set" for the boards that
had not set CONFIG_BOOTDELAY prior to the bad commit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20 05:19:09 -04:00
Tom Rini
09849f4a77 Merge git://git.denx.de/u-boot-dm 2016-06-20 05:14:01 -04:00
Stephen Warren
4581b717b1 reset: implement a reset test
This adds a sandbox reset implementation (provider), a test client
device, instantiates them both from Sandbox's DT, and adds a DM test
that excercises everything.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Masahiro Yamada
7c8ef0feb9 ARM: uniphier: use the default CONFIG_BOOTDELAY=2
I do not insist on CONFIG_BOOTDELAY=3. The default value in Kconfig,
CONFIG_BOOTDELAY=2, is just fine for these boards.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-20 07:15:39 +09:00
Tom Rini
6beacfcff8 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2016-06-18 23:46:43 -04:00
Tom Rini
a10a31ec91 Merge branch 'master' of git://git.denx.de/u-boot-usb
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
2016-06-18 23:46:21 -04:00
Heiko Schocher
71423435fb arm, am335x: siemens: enable DM/DTS support
enable basic DM/DTS support for the siemens am335x based boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-17 09:51:05 -04:00
Heiko Schocher
e7b35eb2e0 arm, am335x: siemens: update etamin defconfig
add missing USB_MUSB_* and CONFIG_G_DNL_*
board configuration.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-17 09:51:03 -04:00
Andreas Dannenberg
ae094f8d55 ARM: AM57xx: Enable FIT for HS Devices
Enable FIT support for AM57xx platforms using the high-security (HS)
device variant.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-17 09:51:02 -04:00
Srinivas, Madan
030cada824 ARM: AM437x: Enable FIT for hs platforms
Adds FIT support to the SPL and u-boot for AM437x HS devices.

Signed-off-by: Madan Srinivas <madans@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-17 09:50:58 -04:00
Srinivas, Madan
8311b3b440 ARM: AM437x: Sync defconfig between GP and HS EVM
Adds missing NAND option to CONFIG_SYS_EXTRA_OPTIONS for
AM437x HS EVMs. This syncs up the config options between
GP and HS EVMs.

Signed-off-by: Madan Srinivas <madans@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-17 09:50:20 -04:00
Tom Rini
7802ce910b configs: Re-sync BOOTDELAY changes
With updated moveconfig.py and an better default, re-generate
the migration of BOOTDELAY to the defconfig.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-17 09:34:49 -04:00
Steve Rae
1653cd18ee arm: bcm281xx: choose 8-bit phy bus width
The Kona PHY supports an 8-bit wide UTMI interface,
therefore, choose this Kconfig setting.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-13 15:16:34 +02:00
Schuyler Patton
332dddc6a1 ARM: dts: AM572x-IDK Initial Support
Add initial DTS support for AM572-IDK evm.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13 08:56:38 -04:00
Lokesh Vutla
5e8f29a082 ARM: AM57xx: Enable FIT
Enable FIT support for AM57xx platforms

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13 08:56:37 -04:00
Lokesh Vutla
165bd7a1cc board: am57xx: Rename TARGET_BEAGLE_X15 as TARGET_AM57XX_EVM
board/am57xx supports all boards based on am57xx. Rename the taget
as TARGET_AM57XX_EVM.

Fixes: 74cc8b097d ("board: ti: beagle_x15: Rename to indicate support for TI am57xx evms")
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-13 08:56:36 -04:00
Eddy Petrișor
9702ec00e9 armv8: s32v234: Introduce basic support for s32v234evb
Add initial support for NXP's S32V234 SoC and S32V234EVB board.

The S32V230 family is designed to support computation-intensive applications
for image processing. The S32V234, as part of the S32V230 family, is a
high-performance automotive processor designed to support safe
computation-intensive applications in the area of vision and sensor fusion.

Code originally writen by:
Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com>
Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>

Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>
2016-06-13 08:56:35 -04:00
Steve Rae
43486e4cd0 board: arm:: Add support for Broadcom BCM23550
Add support for the Broadcom BCM23550 board.

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-06-13 08:56:02 -04:00
Tom Rini
1e031249a5 Merge branch 'master' of git://git.denx.de/u-boot-arc 2016-06-13 08:51:50 -04:00
Tom Rini
fd9102dafe Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-06-13 08:50:58 -04:00
Alexey Brodkin
fc1e8fbbb2 axs103: Bump CPU frequency from 50MHz to 100MHz
In the upcoming release of axs103 v1.1 CPU will
run @100MHz which we support with that change.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13 14:38:05 +02:00
Andre Renaud
885fc03aab arm: at91: Add support for gurnard
This board is based on Snapper 9G45 which has an Atmel AT91SAM9G45 chip and
128MB of SDRAM. It includes a small LCD, 2xUSB host, SD card, Ethernet and
two UARTs.

Signed-off-by: Andre Renaud <andre@designa-electronics.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[apply CONFIG_BOOTDELAY transition]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-06-12 23:49:38 +02:00
Tom Rini
672a45e828 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-06-12 12:52:33 -04:00
Tom Rini
3fc304b8d7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-06-12 12:51:34 -04:00
Tom Rini
b57129dbda Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-06-12 09:55:16 -04:00
Bin Meng
2f29c83eec x86: Enable regmap and syscon for coreboot and qemu-x86
These are generic and should be turned on on coreboot and qemu-x86.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12 12:19:35 +08:00
Yuan Yao
a646f66981 armv8: ls2080aqds: Enable QSPI boot support
This patch adds QSPI boot support for LS2080AQDS board.
The QSPI boot image need to be programmed into the QSPI flash
first. Then we can switch to booting from QSPI memory space.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:45:01 -07:00
Yuan Yao
01de830402 configs: ls2080aqds_nand_defconfig: Enable QSPI
The Freescale QSPI driver has been converted to Driver Model.
This patch enables FSL_QSPI and its dependence options, DM, DM_SPI,
OF_CONTROL and so on.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-10 13:45:00 -07:00
Hans de Goede
fd2aa39a61 sunxi: Add INITIAL_USB_SCAN_DELAY to Mele_A1000G_quad_defconfig
The Mele_A1000G_quad has an onboard usb <-> sata conversion which needs
longer then the usb-spec allows to connect after getting power.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-06-10 12:09:38 +02:00
Hans de Goede
1903bb91c4 sunxi: Enable ALDO3 and ALDO4 in Wobo_i5_defconfig
These are used for the usb wifi and if we leave the enabling up to the
kernel, we get hit by the axp209 issues with enabling ldo3 or 4 post boot
and the systems hangs as soon as it is enabled.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-06-10 12:09:38 +02:00
Heiko Schocher
6b3943f1b0 siemens,am33x: add draco etamin board
In the draco CPU board family, etamin is a new variant
with bigger flash and more RAM. Due to new flash that
uses larger pages (4K) some changes are necessary because
it impacts the MTD partition layout and the ubi mount
parameters.

Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
[trini: Move BOOTDELAY into defconfig, just always be 3 now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-09 13:53:13 -04:00
Heiko Schocher
d8ccbe93b5 am335x, shc: add support for the am335x based bosch shc board
U-Boot SPL 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:40:06)
SHC C3-Sample
MPU reference clock runs at 6 MHz
Setting MPU clock to 594 MHz
Enabling Spread Spectrum of 18 permille for MPU
Trying to boot from MMC
reading u-boot.img
reading u-boot.img

U-Boot 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:05:35 +0100)

       Watchdog enabled
I2C:   ready
DRAM:  512 MiB
reloc off 1f783000
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Net:   cpsw
U-Boot#

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:10 -04:00
Heiko Schocher
bb597c0eeb common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.

Signed-off-by: Heiko Schocher <hs@denx.de>

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-09 13:53:05 -04:00
Pavel Machek
35546f6f20 ARM: socfpga: add support for IS1 board
This adds support for IS1 board. Pretty usual socfpga board,
256MB of RAM, does not have MMC, two SPI chips, one ethernet port, two
additional ethernet ports connected to the FPGA.

Signed-off-by: Pavel Machek <pavel@denx.de>
2016-06-08 02:56:30 +02:00
Andrew Shadura
f1249119bf board: ge: bx50v3: disable unused features to improve size and boot speed
Disable unused FPGA, NFS, FAT and EFI support to reduce the bootloader
size. Don't clear memory reserved for malloc to improve boot speed.

Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
2016-06-07 18:13:07 +02:00
Andrew Shadura
c26ffd9b3c board: ge: bx50v3: make network support optional and disabled by default
The network support is only useful for development and shouldn't be enabled
in production, so it has to be disabled in U-boot by default.

Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
2016-06-07 18:13:07 +02:00
Andrew Shadura
fc44902a0d board: ge: bx50v3: make USB support optional and disabled by default
The USB support is only useful for development and shouldn't be enabled
in production, so it has to be disabled in U-boot by default.

Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
2016-06-07 18:13:06 +02:00
Tom Rini
d77fa2ff76 Merge http://git.denx.de/u-boot-samsung
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	configs/peach-pi_defconfig
	configs/peach-pit_defconfig
2016-06-06 13:39:43 -04:00
Andre Przywara
cdaa633fcf arm/arm64: implement a boot header capability
Some SPL loaders (like Allwinner's boot0, and Broadcom's boot0)
require a header before the actual U-Boot binary to both check its
validity and to find other data to load. Sometimes this header may
only be a few bytes of information, and sometimes this might simply
be space that needs to be reserved for a post-processing tool.

Introduce a config option to allow assembler preprocessor commands
to be inserted into the code at the appropriate location; typical
assembler preprocessor commands might be:
  .space 1000
  .word 0x12345678

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Steve Rae <srae@broadcom.com>
Commit Notes:
Please note that the current code:
  start.S (arm64) and
  vectors.S (arm)
already jumps over some portion of data already, so this option basically
just increases the size of this region (and the resulting binary).

For use with Allwinner's boot0 blob there is a tool called boot0img[1],
which fills the header to allow booting A64 based boards.
For the Pine64 we need a 1536 byte header (including the branch
instruction) at the moment, so we add this to the defconfig.

[1] https://github.com/apritzel/pine64/tree/master/tools
END
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06 13:39:19 -04:00
Lokesh Vutla
ca5599c3fb ARM: DRA7xx: Enable FIT for hs platforms
Use a single defconfig for all DRA7xx hs platforms by enabling FIT and delete
the platform specific defconfigs.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-06-06 13:39:17 -04:00
Dirk Eibach
145510cc76 strider: Support cpu-dp flavor
There is new strider cpu flavor with DisplayPort video.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06 13:39:14 -04:00
Dirk Eibach
1d2541ba32 strider: Support con-dp flavor
There is a new strider console flavor with DisplayPort
video.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-06 13:39:13 -04:00
Tom Rini
ffd859979e Merge branch 'master' of git://git.denx.de/u-boot-usb
Modified:
	configs/ls1012afrdm_qspi_defconfig
	configs/ls1012aqds_qspi_defconfig
	configs/ls1012ardb_qspi_defconfig
	include/configs/ls1012afrdm.h
	include/configs/ls1012aqds.h
	include/configs/ls1012ardb.h

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-06 13:37:56 -04:00
Tom Rini
1cb9cb3ec0 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-06-06 07:16:39 -04:00
Michal Simek
59e880560f ARM64: zynqmp: Extend malloc space before relocation
For boards which have more devices it is necessary to extend malloc
space.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:41 +02:00
Michal Simek
0c1b02a736 ARM64: zynqmp: Enable support for SPL FIT images
Enable support for RAM based FIT images read by SPL.
Empty function for now to keep compiler happy.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:28 +02:00
Michal Simek
08ac386bb2 ARM64: zynqmp: Add support for zc1751-dc4
zc1751-dc4 contains four GEMs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
ead66ab6df ARM64: zynqmp: Add debug uart for zc1751-dc2
Add debug uart for zc1751-dc2.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
ac551e3492 microblaze: Move MSR instruction selection to Kconfig
Select MSR instructions via Kconfig instead of xparameters.h.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
91eeb80ee7 microblaze: Select compilation flags via Kconfig
Remove autogenerated config.mk and select CPU options via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Michal Simek
1630d5582c ARM64: zynqmp: Enable CMD_NAND via Kconfig
Simplify board file by enabling CMD_NAND via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-06-06 11:23:27 +02:00
Tom Rini
c41c649c2f Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-06-04 08:49:08 -04:00
Masahiro Yamada
10db750036 usb: move CONFIG_USB_XHCI_DWC3 to Kconfig
Create an entry for "config USB_XHCI_DWC3" in Kconfig and
switch over to it for all boards.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04 00:43:53 +02:00
Masahiro Yamada
0a8cc1a3a4 usb: move CONFIG_USB_XHCI to Kconfig with renaming
Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it
into CONFIG_USB_XHCI_HCD.

As commented in the help of "config USB_XHCI" entry, this has been
a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI
have been unified in favor of the former.

Note:
Some boards define CONFIG_USB_XHCI in their headers without
CONFIG_USB, which does not meet the "depends on" in Kconfig.
I added CONFIG_USB=y for those boards when converting.
Otherwise, they would fail to build.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04 00:43:53 +02:00
Masahiro Yamada
0ff27eb25f configs: blackfin: move CONFIG_USB to defconfig
These Blackfin boards are the last ones that define CONFIG_USB in
their headers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-04 00:43:53 +02:00
Prabhakar Kushwaha
ff78aa2ba1 armv8: ls1012a: Add support of ls1012afrdm board
QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance
development platform, with a complete debugging environment.
The LS1012AFRDM board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Prabhakar Kushwaha
3b6e3898c2 armv8: ls1012a: Add support of ls1012ardb board
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Prabhakar Kushwaha
9d044fcb8c armv8: ls1012a: Add support of ls1012aqds board
QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
development platform, with a complete debugging environment.
The LS1012AQDS board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
Tom Rini
f15715afea Merge branch 'master' of git://git.denx.de/u-boot-tegra 2016-06-03 16:30:47 -04:00
Tom Rini
edb697cfcc Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2016-06-02 21:42:23 -04:00
Marek Vasut
e68df9994e ARM: omap: Enable tiny printf on omap3_logic
Enable support for tiny printf on the omap3_logic board to trim down
the SPL size. This makes the SPL actually build again and fit into
the SRAM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: lesne@alse-fr.com
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-02 21:21:43 -04:00
Marek Vasut
35016e39fe mips: wdr4300: Move the CONFIG_USE_PRIVATE_LIBGCC to Kconfig
This fixes the last remaining libgcc warning, where the symbol was
defined twice.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-02 21:21:42 -04:00
Marek Vasut
5bb4050df3 arm: socfpga: Enable tiny printf and simple malloc in SPL
Enable both features to reduce the SPL size by 6 kiB.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Stefan Roese <sr@denx.de>
2016-06-01 22:44:14 +02:00
Marek Vasut
569a191a86 arm: socfpga: Add samtec VIN|ING board
Add support for board based on the popular Altera Cyclone V SoC.
This board has the following properties:
 - 1 GiB of DRAM
 - 1 Gigabit ethernet
 - 1 USB gadget port
 - 1 USB host port with an on-board hub
 - 2 QSPI NORs connected to the Cadence QSPI core
 - Multiple I2C EEPROMs and one I2C temperature sensor

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
---
V2: Update the defconfig as per Tom's request
2016-06-01 22:44:14 +02:00
Stephen Warren
10a03382f0 ARM: tegra: add p2771-0000 board support
P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The
combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B
port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion
headers.

Currently, due to U-Boot's level of support for Tegra186, the only
features supported by U-Boot are the console UART and the on-board eMMC.
Additional features will be added over time.

U-Boot has so far been tested by replacing the kernel image on the device
with a U-Boot binary. It is anticipated that U-Boot will eventually
replace the CCPLEX bootloader binary, as on previous chips. This hasn't
yet been tested.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-31 11:22:59 -07:00
Tom Rini
da6e2fab5d Merge branch 'master' of git://git.denx.de/u-boot-mips 2016-05-31 10:26:14 -04:00
Tom Rini
653bb0d92e Merge git://www.denx.de/git/u-boot-marvell 2016-05-31 10:26:02 -04:00
Wills Wang
04583c686e mips: ath79: ap121: Enable ethernet
This patch enable network function for ap121 board.

Signed-off-by: Wills Wang <wills.wang@live.com>
Acked-by: Marek Vasut <marex@denx.de>
2016-05-31 10:17:54 +02:00
Daniel Schwierzeck
d58de3157e MIPS: malta: add defconfigs for MIPS64
Add defconfigs for recently introduced MIPS64 support on
Malta boards to get more build coverage for MIPS64.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-31 09:49:08 +02:00
Stefan Roese
e084fd922f arm: spear: x600: Remove EFI support to reduce image size
EFI is not needed on x600. So lets remove the EFI support to make it fit
into the 0x60000 image size limit again.

Signed-off-by: Stefan Roese <sr@denx.de>
2016-05-31 07:48:40 +02:00
Peter Robinson
452b3813f9 clearfog: add HUSH parser
In the big move of CONFIG_HUSH_PARSER to config files the clearfog
somehow missed out.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-05-31 07:43:51 +02:00
Tom Rini
f3c264f9de Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-05-30 13:56:26 -04:00
Bin Meng
e6ddb6b013 x86: galileo: Enable ACPI table generation
Enable ACPI table generation by creating a DSDT table.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-30 10:21:12 +08:00
Tom Rini
e4a94ce4ac Merge git://git.denx.de/u-boot-dm
For odroid-c2 (arch-meson) for now disable designware eth as meson
now needs to do some harder GPIO work.

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	lib/efi_loader/efi_disk.c

Modified:
	configs/odroid-c2_defconfig
2016-05-27 20:34:12 -04:00
Lokesh Vutla
73ec696059 ARM: dts: AM335x-ICEv2: Add minimal dts support
Add minimal dts support for AM335x-ICEv2 board

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-05-27 15:47:53 -04:00
Lokesh Vutla
da9d9599ac ARM: dts: AM335x-BBG: Add initial support
Add initial DTS support for AM335x-BBG

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:49 -04:00
Lokesh Vutla
3819ea7063 ARM: dts: AM335x-evmsk: Add initial support
Add initial DTS support for AM335x-evm sk.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:49 -04:00
Lokesh Vutla
80b24fcd30 ARM: AM335x: Enable FIT
Use a single defconfig for all AM335x platforms by enabling FIT

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:47:48 -04:00
Lokesh Vutla
3c5835955a ARM: AM43xx: configs: Update usb host boot defconfig
Convert usb host boot defconfig to use DM, DT. Also enable FIT
support.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:47 -04:00
Lokesh Vutla
54a92e1ad8 ARM: dts: AM437x-IDK Initial Support
Add initial DTS support for AM437x-IDK evm.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:46 -04:00
Lokesh Vutla
7dd1283048 ARM: dts: AM43x-EPOS Initial Support
Add initial DTS support for AM43-EPOS evm.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:46 -04:00
Lokesh Vutla
4c4e3b3775 ARM: AM43xx: Enable FIT
Use a single defconfig for all AM43xx platforms by enabling FIT and delete
the platform specific defconfigs.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:47:45 -04:00
Lokesh Vutla
cfd921f7cc ARM: DRA7: configs: Remove obsolete configs
Removing:
uart3_defconfig:
Now uart3 can be selected using menuconfig, removing separate
config for uart mode. Doing uart boot is not straight forward as ROM uses
uart3 as default serial console. In order to boot to prompt, concole in both
u-boot and kernel needs to be changed.

qspiboot_defconfig:
The only advantage of enabling QSPI_BOOT is selecting env in QSPI.
Eventually env needs to be selected by menuconfig so removing
qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-05-27 15:47:45 -04:00
Lokesh Vutla
bd7245849f ARM: DRA7: Enable FIT
Use a single defconfig for all DRA7 platforms by enabling FIT and delete
the platform specific defconfigs.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:47:44 -04:00
Daniel Allred
53d150b141 defconfig: ti: Add configs for OMAP5-class secure parts
Adds new defconfig files for DRA7xx and AM57xx secure devices.
These are the same as the non-secure parts, but with the addition
of the CONFIG_TI_SECURE_DEVICE option set to 'y'.

Signed-off-by: Daniel Allred <d-allred@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:38 -04:00
Daniel Allred
62a09f0535 ARM: omap5: add ft_board_setup for dra7xx/am57xx
Adds the board specific ft_board_setup() functions that
are called when CONFIG_OF_BOARD_SETUP is defined. These functions
will currently just call the ft_cpu_setup() function.

Adds CONFIG_OF_BOARD_SETUP to the defconfig files
for dra72_evm, dra74_evm, and am57xx_evm.

Signed-off-by: Daniel Allred <d-allred@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:38 -04:00
Madan Srinivas
df277e66b3 defconfig: Add a config for AM43xx secure part
Adds a new defconfig file for the AM43xx secure device.
This is the same as for the non-secure part, except for:
	CONFIG_TI_SECURE_DEVICE option set to 'y'
	CONFIG_ISW_ENTRY_ADDR updated for secure images.

Signed-off-by: Daniel Allred <d-allred@ti.com>
Signed-off-by: Madan Srinivas <madans@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:35 -04:00
Madan Srinivas
9aac7d0ec9 ti: AM43xx: Use CONFIG options from SOC Kconfig
Updates configs/am43xx_evm.h to use CONFIG options from
SOC specific Kconfig file for various calculations.

On AM43x devices, the address of SPL entry point  depends on
the device type, i.e. whether it is secure or non-secure.

Further, for non-secure devices, the SPL entry point is different
between  USB HOST boot mode, other "memory" boot modes (MMC, NAND)
and "peripheral" boot modes (UART, USB)

To add to the complexity, on secure devices, in addition to the
above differences, the SPL entry point can change because of the
space occupied by other components (other than u-boot or spl)
that go into a secure boot image.

To prevent the user from having to modify source files every time
any component of the secure image changes, the value of
CONFIG_SPL_TEXT_BASE has been set using a Kconfig option that
is supplied in the am43xx_*_defconfig files

Using the CONFIG options also enables us to do away with some
compile time flags that were used to specify CONFIG_SPL_TEXT_BASE
for different boot modes.

On QSPI devices, the same problem described above occurs w.r.t. the
address of the u-boot entry point in flash, when booting secure
devices. To handle this, CONFIG_SYS_TEXT_BASE is also setup via
a Kconfig option and the defconfig files.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Daniel Allred <d-allred@ti.com>

Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:34 -04:00
Madan Srinivas
6384726d2d arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Adding support for AM43xx secure devices require the addition
of some SOC specific config options like the amount of memory
used by public ROM and the address of the entry point of u-boot
or SPL, as seen by the ROM code, for the image to be built
correctly.

This mandates the addition of am AM43xx CONFIG option and the
ARM Kconfig file has been modified to source this SOC Kconfig
file. Moving the TARGET_AM43XX_EVM config option to the SOC
KConfig and out of the arch/arm/Kconfig.

Updating defconfigs to add the CONFIG_AM43XX=y statement and
removing the #define CONFIG_AM43XX from the header file.

Signed-off-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Daniel Allred <d-allred@ti.com>

Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:41:33 -04:00
Alexander Graf
6a6187efd2 efi_loader: Select bounce buffers for known-bad boards
We know for certain that we have 32bit DMA hardware, but 64bit addresses
on LS2085A and ZynqMP, so let's enable EFI bounce buffers for all defconfigs
on these SoCs.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27 15:39:49 -04:00
Beniamino Galvani
bfcef28ae4 arm: add initial support for Amlogic Meson and ODROID-C2
This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a
board definition for ODROID-C2. This initial submission only supports
UART and Ethernet (through the existing Designware driver). DTS files
are the ones submitted to Linux arm-soc for 4.7 [1].

[1] https://patchwork.ozlabs.org/patch/603583/

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-27 15:39:47 -04:00
Alexander Graf
210be5c4cb net: Move CONFIG_SPL_NET_VCI_STRING into Kconfig
This patch also adds the SPL time VCI string into Kconfig.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:39:45 -04:00
Simon Glass
56d6977121 rockchip: Drop unnecessary SPL properties
While we consider whether to drop use of DT in SPL, remove some unwanted
properties. This reduces SPL size by about 250 bytes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 10:23:07 -06:00
Alexander Graf
0dac6b4e85 net: Move the VCI and client arch values to Kconfig
We have a bunch of boards that define their vendor class identifier and
client archs in the board files or in the distro config. Move everything
to the generic Kconfig options.

We're missing the distinction between i386 and x86_64, as I couldn't find
any config variable that would tell us the difference. Is that really important
to people? I guess not, so I left it out.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-27 10:01:12 -04:00
Stephen Warren
8961b52424 mailbox: implement a sandbox test
This adds a sandbox mailbox implementation (provider), a test client
device, instantiates them both from Sandbox's DT, and adds a DM test
that excercises everything.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org> # v1
2016-05-26 20:48:31 -06:00
Stephen Warren
1163625898 Rename reset to sysreset
The current reset API implements a method to reset the entire system.
In the near future, I'd like to introduce code that implements the device
tree reset bindings; i.e. the equivalent of the Linux kernel's reset API.
This controls resets to individual HW blocks or external chips with reset
signals. It doesn't make sense to merge the two APIs into one since they
have different semantic purposes. Resolve the naming conflict by renaming
the existing reset API to sysreset instead, so the new reset API can be
called just reset.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:48:31 -06:00
Tom Rini
6523dbf7cc Merge branch 'master' of git://git.denx.de/u-boot-mips 2016-05-25 20:22:48 -04:00
Paul Burton
6242aa1374 malta: Use device model & tree for UART
Make use of device model & device tree to probe the UART driver. This is
the initial step in bringing Malta up to date with driver model, and
allows for cleaner handling of the different I/O addresses for different
system controllers by specifying the ISA bus address instead of a
translated memory address.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-26 01:34:13 +02:00
Tom Rini
82f2a14491 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-05-25 12:32:56 -04:00
Stefan Mavrodiev
0e6e34ac8d sunxi: Olimex A20 boards: Enable LDO3 and LDO4 regulators
Sets LDO3 and LDO4 regulators at 2.8V. In the current config
these are off. This causes kernel to hang during
axp209 initialization.

Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25 17:52:56 +02:00
Hans de Goede
0878a8a7db sunxi: Enable a bunch of commands by default on sunxi
Recently a set of CONFIG_CMD_FOO defines was moved from being defined
in config_distro_defaults to Kconfig, and added to all sunxi defconfigs
to compensate.

Instead of explictly selecting these in all sunxi defconfigs,
simply always select these for sunxi boards. This makes the defconfigs
simpler and ensures a consistent set of available commands across all
sunxi boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25 17:52:39 +02:00
Andre Przywara
c1fd244187 arm64: Pine64: update FDT files
The originally committed .dts files for the Pine64 were from an early
proof-of-concept version and should have never been committed upstream.
Replace them with much more mature versions, which also use a different
naming scheme.
Please note that at this point there is at least one binding which has
not been agreed upon, so this is subject to change.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25 17:52:39 +02:00
Chen-Yu Tsai
9850e20148 sunxi: Enable AXP818 SW for Sinovoip BPI M3
The SW output of the PMIC supplies the ethernet PHY with power.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-25 17:52:39 +02:00
Masahiro Yamada
667dbcd01d ARM: uniphier: add PH1-LD11 SoC support
This is a low-cost ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26 00:37:13 +09:00
Simon Glass
bb5930d5c9 exynos: video: Convert several boards to driver model for video
Update several boards to use driver model for video. This involves changes
to the EDP and FIMD (frame buffer) drivers. Existing PWM, simple-panel and
pwm-backlight drivers are used. These work without additional configuration
since they use the device tree settings in the same way as Linux.

Boards converted are:
- snow
- spring
- peach-pit
- peach-pi

All have been tested. Not converted:

- MIPI display driver
- s5pc210_universal
- smdk5420
- smdk5250
- trats
- trats2

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 13:25:19 +09:00
Thomas Abraham
6c15a2a996 board: samsung: add initial Espresso7420 board support
Espresso7420 is a development/evaluation board for Exynos7420 SoC. It
includes multiple onboard compoments (EMMC/Codec) and various
interconnects (USB/HDMI).

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 10:00:19 +09:00
Thomas Abraham
36aa893775 arm: exynos: realign the code to allow support for newer 64-bit platforms
The existing Exynos 32-bit platform support needs to be realigned in
order to support newer 64-bit Exynos platforms. The driver model will
be utlized for drivers on the 64-bit Exynos platforms and so some of
the older platform support code would not be required for the newer
64-bit Exynos platforms.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 10:00:19 +09:00
Tom Rini
fc15b9beed Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-05-24 13:42:03 -04:00
Tom Rini
2ee490a024 Merge branch 'master' of git://git.denx.de/u-boot-net
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	drivers/net/zynq_gem.c
2016-05-24 11:59:02 -04:00
Mugunthan V N
641b936fa5 defconfig: dra74_evm: enable eth driver model
Enable eth driver model for dra74_evm as cpsw supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-05-24 11:42:04 -05:00
Mugunthan V N
bc705ea1cf defconfig: am437x_sk_evm: enable eth driver model
Enable eth driver model for am437x_sk_evm as cpsw supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-05-24 11:42:03 -05:00
Mugunthan V N
54e3ba993a defconfig: am437x_gp_evm: enable eth driver model
Enable eth driver model for am437x_gp_evm as cpsw supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-05-24 11:42:03 -05:00
Tom Rini
ec8fb48ce9 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-05-24 08:20:43 -04:00
Tom Rini
c98dc5a133 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-05-24 07:22:55 -04:00
Michal Simek
ad5b580126 ARM: zynq: Simplify zynq configuration
Extending Kconfig for adding new platform is a lot of work
for nothing. Setting SYS_CONFIG_NAME directly in Kconfig and
remove all dependencies on TARGET_ZYNQ_* options including SPL.
As a side-effect it also remove custom init folder for ps7_init_gpl.*
files. Folder is chosen based on device-tree file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 13:22:50 +02:00
Michal Simek
293271cbc3 ARM64: zynqmp: Enable CLK framework
ZynqMP is using fixed clocks now that's why enabling it to be available
for drivers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:01 +02:00
Michal Simek
bd483780d3 ARM64: zynqmp: Add debug uart for zc1751-dc1
It is helpful for debugging.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:01 +02:00
Michal Simek
71eb243be3 ARM64: zynqmp: Enable SPI_FLASH and FLASH_BAR for ep108
Add missing SPI flash options.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:01 +02:00
Michal Simek
73dc3fa6fe ARM64: zynqmp: Wire up debug_uart setup
It has to be enabled by debug_uart_init().

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:00 +02:00
Michal Simek
af3b4cd6b5 ARM64: zynqmp: Enable HUSH parser for all zynqmp targets
Enable HUSH for all zynqmp boards which don't have it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 11:15:00 +02:00
Marek Vasut
12328f25f2 ARM: atmel: Enable FIT image support for SAMA5Dx
Enable the fitImage support for the entire SAMA5Dx lineup of CPUs.
The fitImage is superior image format to uImage and it is useful
to have it available.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
[rebase on current ToT]
Signed-off-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-24 08:08:37 +02:00
Wenyou Yang
9989c1567d board: atmel: add SAMA5D2 PTC Engineering board
The board supports following features:
 - Boot media support: NAND Flash/SPI Flash
 - Support ethernet
 - Support USB mass storage

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-24 08:08:35 +02:00
Tom Rini
6d54868eeb Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-05-23 18:32:47 -04:00
Tom Rini
d7d0003112 Merge branch 'master' of git://git.denx.de/u-boot-mips 2016-05-23 11:51:37 -04:00
Bin Meng
84c299940d x86: galileo: Enable MP table generation
Now that we have added CPU uclass driver and fixed the IOAPIC ID
conflict, enable MP table generation so that IOAPIC can be used
by the Linux kernel.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23 15:27:42 +08:00
Bin Meng
0ac8d5e552 x86: galileo: Enable CPU driver
Add a cpu node in the device tree and enable CPU driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23 15:27:41 +08:00
Bin Meng
2baf3a5584 x86: crownbay: Disable boot stage support
It is observed that when enabling boot stage support, occasionally
the board reboots during boot over and over again, and eventually
boots to shell. This was seen on my board, but not on Jian's board.
Debugging shows that the TSC timer calibration against PIT fails
as boot stage APIs utilize timer in a very early stage and at that
time TSC/PIT may not be stable enough for the calibration to pass.

Disable it for now.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Jian Luo <Jian.Luo4@boschrexroth.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23 15:18:00 +08:00
Bin Meng
da944391e8 x86: baytrail: Enable SeaBIOS on all boards
SeaBIOS can be loaded by U-Boot to aid the installation of Ubuntu
and Windows to a SATA drive and boot from there. Enable it on all
BayTrail boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23 15:18:00 +08:00
Miao Yan
f7e20f6628 config: sandbox: enable qfw and cmd_qfw for testing
This patch enables qfw and cmd_qfw on sandbox for build coverage test

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-23 15:18:00 +08:00
Miao Yan
1868659002 cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h]
Make file names consistent with CONFIG_QFW and CONFIG_CMD_QFW

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-23 15:18:00 +08:00
Tom Rini
dd6f3abbb8 x86: qemu: Move qfw command over to cmd and add Kconfig entry
- Move the command portion of arch/x86/cpu/qemu/fw_cfg.c into
  cmd/qemu_fw_cfg.c
- Move arch/x86/include/asm/fw_cfg.h to include/qemu_fw_cfg.h
- Rename ACPI table portion to arch/x86/cpu/qemu/acpi_table.c

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-05-23 15:18:00 +08:00
Bin Meng
ad3098f7b8 x86: baytrail: Enable ACPI table generation for all boards
Enable ACPI table generation by creating a DSDT table for all baytrail
boards: conga-qeval20-qa3-e3845, bayleybay and minnowmax.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23 15:18:00 +08:00
Fabio Estevam
83b6a43e6e pico-imx6ul: Select CONFIG_HUSH_PARSER option
Select CONFIG_HUSH_PARSER option in order to fix the following
problem:

Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'

Reported-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Daiane Angolini <daiane.angolini@nxp.com>
2016-05-20 20:42:57 -04:00
Marek Vasut
400df30998 mips: ath79: Add support for TPLink WDR4300
Add support for the TPLink WDR4300 router, which is based on the
AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported
on this system as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
2016-05-21 01:36:39 +02:00
Wills Wang
a2277cc30c mips: ath79: add AP143 reference board
This patch add board-level code and base DT for AP143.

Signed-off-by: Wills Wang <wills.wang@live.com>
[updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21 01:25:50 +02:00
Wills Wang
6a7b52bc8d mips: ath79: add AP121 reference board
This patch add board-level code and base DT for AP121.

Signed-off-by: Wills Wang <wills.wang@live.com>
[updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21 01:25:50 +02:00
Alison Wang
397b0d9e29 arm: ls1021a: Enable CONFIG_OF_LIBFDT and CONFIG_FIT in defconfig
In defconfig, enable CONFIG_OF_LIBFDT to support booting DT linux
kernel and enable COFNIG_FIT to support FIT image.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-18 08:51:47 -07:00
Tom Rini
4b6e1fda10 Merge git://git.denx.de/u-boot-dm 2016-05-17 13:58:27 -04:00
Simon Glass
afa2c3122d dm: sandbox: mmc: Enable building MMC code for sandbox
Enable building the MMC code for sandbox. This increases build
coverage for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f960ca0a5f dm: sandbox: Add a board for sandbox without CONFIG_BLK
While the driver-model block device support is in progress, it is useful to
build sandbox both with and without CONFIG_BLK. Add a separate board for
the latter.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Stefan Roese
4d5e9b39e2 i2c: config: Move SYS_I2C_DW to Kconfig
This patch moves all appearances of CONFIG_SYS_I2C_DW from the config
header to the defconfig files.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-17 08:28:59 +02:00
Hans de Goede
f0a711ec40 sunxi: Enable USB host in CHIP defconfig
Reported-and-tested-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-05-15 11:04:29 +02:00
Fabio Estevam
e8bd2a0bf6 warp7: Fix boot by selecting CONFIG_OF_LIBFDT
CONFIG_OF_LIBFDT needs to be selected to avoid the following
boot problem:

reading zImage
6346216 bytes read in 118 ms (51.3 MiB/s)
Booting from mmc ...
reading imx7d-warp.dtb
32593 bytes read in 11 ms (2.8 MiB/s)
Kernel image @ 0x80800000 [ 0x000000 - 0x60d5e8 ]
FDT and ATAGS support not compiled in - hanging
### ERROR ### Please RESET the board ###

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-05-10 14:54:11 -04:00
Stefan Roese
8b1a07493f arm: socfpga: socrates: Add 'time' command
The time command is very helpful for performance and regressions tests.
So lets enable it on SoCrates.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
2016-05-06 18:41:49 +02:00
Hans de Goede
ad14166426 sunxi: Enable LDO3 at 3.3V on A13-OLinuXino board
LDO3 is used for the VGA output, this fixes a regression where the VGA
output on these boards would no longer work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-27 19:54:26 +02:00
Masahiro Yamada
266c63cbf2 ARM: uniphier: revive some commands lost by Kconfig re-sync
The recently added uniphier_ld20_defconfig missed the tree-wide
re-sync by commit 89cb2b5f8b ("configs: Re-sync with cmd/Kconfig").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-26 08:19:30 -04:00
Tom Rini
fc6e3c81de pico-imx6ul: Update the defconfig
The defconfig/config.h file were merged but were already out of sync
with mainline.  This brings them further into line now.

Cc: Richard Hu <richard.hu@technexion.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 18:03:48 -04:00
Peter Griffin
cd593ed699 ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
Currently only the serial pl01x driver is using DT,
and the other drivers still use platform data but
as more DT lands in the upstream kernel the aim is
to migrate the other drivers over to DT as well to
have a fully DT configured hikey u-boot.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:10:34 -04:00
Tom Rini
89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Tom Rini
78d1e1d0a1 configs: Re-sync almost all of cmd/Kconfig
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:40 -04:00
Tom Rini
4d7100a61d configs: Re-sync CONFIG_USB_MUSB_HOST
Now that CONFIG_USB_MUSB_HOST is part of Kconfig, migrate that over to
the defconfig files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 14:22:45 -04:00
Tom Rini
adad96e60d configs: Re-sync HUSH options
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files.  Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 14:22:43 -04:00
Tom Rini
9f69ab86d0 Merge branch 'master' of git://www.denx.de/git/u-boot-uniphier 2016-04-25 13:45:32 -04:00
Tom Rini
588d269ffe Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-04-25 13:34:42 -04:00
Masahiro Yamada
9d0c2ceb35 ARM: uniphier: add PH1-LD20 SoC support
This is the first ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24 09:54:08 +09:00
Tom Rini
748c4a5728 configs: Update some Xilinx configs
As part of 3457bba these configs didn't get updated.  Update them now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20 15:33:05 -04:00
Tom Rini
eb6b50f631 Merge branch 'master' of git://git.denx.de/u-boot-usb
Conflicts:
	configs/bcm28155_ap_defconfig
	configs/dra72_evm_defconfig
	configs/dra74_evm_defconfig
	configs/ma5d4evk_defconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20 09:31:58 -04:00
Sam Protsenko
e6c0bc0643 usb: gadget Move: CONFIG_G_DNL_* to Kconfig
And also reformat defconfigs using "make savedefconfig" rule.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:28 +02:00
Sam Protsenko
b142729d03 usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:28 +02:00
Sam Protsenko
c16bf621d5 usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:28 +02:00
Sam Protsenko
65403f3010 usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig
Description was borrowed from kernel dwc3 Kconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
aaa4a9e313 usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some
config headers. This is also probably fixes am335x_baltos board.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Sam Protsenko
3457bbaf22 usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
  - add next options to Kconfig selecting USB_GADGET_DUALSPEED:
    - USB_GADGET_ATMEL_USBA
    - USB_GADGET_DWC2_OTG
    - USB_DWC3
    - CI_UDC
  - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED

While at it, make some related fixes:
  - remove DUALSPEED from configs that don't enable gadget support:
    - kwb.h
    - tseries.h
  - add missing USB_GADGET option to next configs:
    - novena_defconfig
    - pcm051_rev*_defconfig
    - xfi3_defconfig

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20 11:43:27 +02:00
Fabio Estevam
69cc7dbf1f Add initial support for Technexion's PICO-IMX6UL-EMMC board
Add support for Technexion's PICO-IMX6UL-EMMC board.

For information about this board, please visit:
http://www.technexion.com/products/pico/pico-som/pico-imx6-emmc

Signed-off-by: Richard Hu <richard.hu@technexion.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-19 16:37:36 +02:00
Akshay Bhat
e1acaa6767 bx50v3: Enable CONFIG_OF_LIBFDT in defconfig
As of commit 69e173eb57, CONFIG_OF_LIBFDT
needs to be selected in defconfig instead of board specific header file.
Hence enable CONFIG_OF_LIBFDT in defconfig.

Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
2016-04-18 17:11:50 -04:00
Lokesh Vutla
c1f2057cee configs: ks2: move CMD_NAND to defconfigs
NAND is not yet enabled on all Keystone2 platforms. So enabled
CMD_NAND in the respective defconfigs only if available.

Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 17:11:43 -04:00
Lokesh Vutla
8f69523213 memory: Move TI_AEMIF config to KCONFIG
Not all Keystone2 devices has AEMIF NAND controller. So adding Kconfig
entry for CONFIG_TI_AEMIF and enabling it in respective defconfigs on
platforms with AEMIF controller.

Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 17:11:43 -04:00
Daniel Allred
7e52e11f35 am57x: Move CONS_INDEX to Kconfig
- Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and
      into Kconfig proper.
    - Edit the relevant am57x configs to remove the now unneeded
      CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Daniel Allred <d-allred@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 17:11:31 -04:00
Michal Simek
5375389fe3 kconfig: Move CONFIG_OF_LIBFDT to Kconfig
This patch follows work done by:
"Move CONFIG_OF_LIBFDT to Kconfig"
(sha1: 69e173eb57)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Add xpress* to the patch]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-18 17:11:17 -04:00
Steve Rae
efe8d89943 bcm281xx: enable CONFIG_OF_LIBFDT
set the Kconfig parameter: CONFIG_OF_LIBFDT

Signed-off-by: Steve Rae <srae@broadcom.com>
2016-04-18 12:29:30 -04:00
Mugunthan V N
f0ad6e361d configs: dra74_evm: enable mmc driver model
enable mmc driver model for dra74 evm as omap_hsmmc
supports driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 12:29:21 -04:00
Mugunthan V N
4965919496 configs: dra72_evm: enable mmc driver model
enable mmc driver model for dra72 evm as omap_hsmmc
supports driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 12:29:20 -04:00
Tom Rini
690d8a92c1 sandbox: Enable many more commands
- Set CONFIG_SYS_CACHELINE_SIZE to ARCH_DMA_MINALIGN as that should be
  good enough.
- Make <asm/io.h> include <asm/types.h> like other arches do
- Enable many many more drivers in sandbox_defconfig so that we can get
  more build-time testing on this platform.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-15 08:14:37 -06:00
Tom Rini
541c9be880 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-04-13 12:53:11 -04:00
Michal Simek
58ed7f6693 ARM64: zynqmp: Use i2c cadence DM driver
Use i2c cadence DM driver for all zynqmp targets except ZCU102
because I2C muxes and PCA953x are not supported in the tree yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-04-13 18:29:07 +02:00
Michal Simek
f746b4cfd0 ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108
Enable missing GPIO options.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Michal Simek
6c0c958de8 ARM64: zynqmp: Add support for zc1751 with DC cards
Support ZynqMP zc1751 with DC cards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:06 +02:00
Michal Simek
da81db61d5 ARM64: zynqmp: Add defconfig for zcu102 revB board
Support natively revB board. Till now support for revB was done via
zcu102 defconfig where device-tree was changed to revB.
This patch is adding direct defconfig for RevB.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
1f4f3d33c7 ARM64: zynqmp: Add support for ZCU102 platform
Add new board support.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
aa5b52f56c ARM64: zynqmp: Extend early malloc space to be able to run DM drivers
DM drivers need more malloc space for early DM models allocation.
Use 4k instead of 1k.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
885581a56b ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
There are mini configurations which need to be fit to OCM that's why
these options shouldn't be enabled by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
371fc580d2 ARM: zynq: Extend microzed board support
Add missing DT nodes and enable USB.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13 18:29:02 +02:00
Tom Rini
814013253f Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-04-13 07:19:50 -04:00
Hans de Goede
ec770dba89 sunxi: Add defconfig and dts file for Orange Pi One SBC
The Orange Pi One SBC, is a stripped down version of the popular
Orange Pi PC. The one is a H3 based SBC, with 512M of RAM,
micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet.

The dts is identical to the dts submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12 08:58:03 +02:00
Hans de Goede
88bb800ddf sunxi: Enable CMD_GPIO on all sunxi boards
We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
its Kconfig conversion it has ended up missing on some recently
added boards.

Simply select it for ARCH_SUNXI, so that we get it on all
sunxi boards for both a consistent user experience and simpler
defconfig files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12 08:58:03 +02:00
Hans de Goede
b24f7f008d sunxi: Enable usb ports on the Sinovoip BPI M3
DLDO3 is used to provide Port-D power and PD is used for the
usb-hub / sata-5v enable pins. The 2.5V comes from the schematic
and matches the factory image fex file.

The dts changes are the minimal changes needed for u-boot to
pick-up the usb host controllers. The upstream kernel does not
(yet) have usb host support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12 08:58:03 +02:00
Hans de Goede
e6c9cec4ca sunxi: Set DCDC1 to 3.3V on the Sinovoip BPI M3
This is the value used in the fex file of the manufacturer images,
and also the DCDC1 default. Sometimes lower values are used to save
battery power, but that does not apply to a SBC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12 08:58:03 +02:00
Stephen Warren
d22a765755 ARM: add Raspberry Pi 3 64-bit config
On all Pis so far, the VC FW provides a short stub to set up the ARM CPU
before entering the kernel (a/k/a U-Boot for us). This feature is not
currently supported by the VC FW when booting in 64-bit mode. However,
this feature will likely appear in the near future, and this U-Boot port
assumes that such a feature is in place. Without that feature, or a
temporary workaround described below, U-Boot will not boot.

Once the VC FW does provide the ARM stub, u-boot.bin built for rpi_3 can
be used drectly as kernel7.img, in the same way as any other RPi port. The
following config.txt is required:

    # Fix mini UART input frequency, and setup/enable up the UART.
    # Without this option, U-Boot will not boot, even if you don't care
    # about the serial console. This option will always be required for
    # all RPi3 use-cases, unless the PL011 UART is used, which is not
    # yet supported by rpi_3* builds of U-Boot.
    enable_uart=1
    # Boot in AArch64 (64-bit) mode.
    # It is possible that a future VC FW will remove the need for this
    # option, instead auto-setting 32-/64-bit mode based on the "kernel"
    # filename present on the SD card.
    arm_control=0x200

Prior to the VC FW providing the ARM boot stub, you can use the following
steps to build an equivalent stub into the U-Boot binary:

git clone https://github.com/swarren/rpi-3-aarch64-demo.git \
    ../rpi-3-aarch64-demo
(cd ../rpi-3-aarch64-demo && ./build.sh)
Build U-Boot for rpi_3 in the usual way
cat ../rpi-3-aarch64-demo/armstub64.bin u-boot.bin > u-boot.bin.stubbed
Use u-boot.bin.stubbed as kernel7.img on the Pi SD card.

In this case, the following additional entries are required in config.txt:

    # Tell the FW to load the kernel image at address 0, the reset vector.
    kernel_old=1

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-11 12:44:38 -04:00
Sam Protsenko
4861be7e68 arm: socfpga: sr1500: Remove USB_GADGET
"buildman" tool revealed that USB_GADGET was enabled by mistake for this
board in process of moving that option to Kconfig. Remove it to bring
things back to correct state.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Stefan Roese <sr@denx.de>
2016-04-11 12:44:37 -04:00
Tom Rini
9dbdc6ebd4 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2016-04-10 19:55:25 -04:00
Denis Bakhvalov
723a72af29 arm: socfpga: migration of CONFIG_SPI_FLASH_BAR
CONFIG_SPI_FLASH_BAR was deleted from socfpga_common.h
and placed in socfpga_*_defconfig because it is Kconfig symbol.

Signed-off-by: Denis Bakhvalov <dendibakh@gmail.com>
Reported-by: Denis Bakhvalov <dendibakh@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2016-04-10 17:19:49 +02:00
Purna Chandra Mandal
ac7eef716e board: pic32mzda: enable USB-host, USB-storage support.
Enable MUSB host and USB storage support for Microchip
PIC32MZ[DA] Starter Kit.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-04-10 17:18:42 +02:00
York Sun
3c1d218a1d armv8: LS2080A: Consolidate LS2080A and LS2085A
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2016-04-06 10:26:46 -07:00
Tom Rini
4ed6ed3c27 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-04-04 14:34:09 -04:00
Michal Simek
26ae9204c4 ARM: zynq: Enable FLASH_BAR for microzed and zybo
Enable FLASH_BAR for these targets to be in sync with all zynq boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:39 +02:00
Michal Simek
a3afb4a4bf ARM64: Move HUSH enabling from board file to defconfig
Simplify board config file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Michal Simek
a1108da731 ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig
This option enable adding new platform suport just by adding defconfig
and DTS file which will target generic configuration for SoC.
Make no sense to extend Kconfig just create a pointer between DTS and
configuration file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Stefan Roese
606576d54b arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
This patch adds basic support for the Marvell A375 eval board. Tested
are the following interfaces:
- I2C
- SPI
- SPI NOR
- Ethernet (mvpp2), port 0 & 1

Currently the A375 SerDes and DDR3 init code is not intergrated. So
the SPL U-Boot is not fully functional.

Right now, this A375 mainline U-Boot can only be used by chainloading
it via the original Marvell U-Boot. This can be done via this
command:

=> tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-04-04 11:22:10 +02:00
Marek Vasut
a473122c48 arm: mxs: Update MX28EVK config
Enable FIT image support, EXT4 support and generic FS support.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-04-03 19:14:02 +02:00
Mateusz Kulikowski
626f048bbc board: Add Qualcomm Dragonboard 410C support
This commit add support for 96Boards Dragonboard410C.
It is board based on APQ8016 Qualcomm SoC, complying with
96boards specification.
Features (present out of the box):
- 4x Cortex A53 (ARMv8)
- 2x USB Host port
- 1x USB Device port
- 4x LEDs
- 1x HDMI connector
- 1x uSD connector
- 3x buttons (Power, Vol+, Vol-/Reset)
- WIFI, Bluetooth with integrated antenna
- 8GiB eMMC

U-Boot boots chained with fastboot in 64-bit mode.
For detailed build instructions see readme.txt in board directory.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:27 -04:00
Mateusz Kulikowski
d33776e43d spmi: Add sandbox test driver
This patch adds emulated spmi bus controller with part of
pm8916 pmic on it to sandbox and tests validating SPMI uclass.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:12 -04:00
Mateusz Kulikowski
5493a32c8e Migrate CONFIG_ULPI* to Kconfig
Move CONFIG_USB_ULPI* from headers to defconfigs for boards that use it.
Also - add CONFIG_USB where necesarry - all boards use it,
but some are not defining it explicitly.

Affected boards:
colibri_t20, harmony, mcx, mt_ventoux, twister,
zynq_(picozed, zc702, zc706, zed, zybo)

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:09 -04:00
Paul Kocialkowski
163d876472 kc1: Select libfdt to allow running devicetree-based kernels
Selecting CONFIG_OF_LIBFDT allows running recent mainline kernels.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-04-01 17:18:06 -04:00
Stephen Warren
f031f501ef rpi: BCM2837 and Raspberry Pi 3 32-bit support
The Raspberry Pi 3 contains a BCM2837 SoC. The BCM2837 is a BCM2836 with
the CPU complex swapped out for a quad-core ARMv8. This can operate in 32-
or 64-bit mode. 32-bit mode is the current default selected by the
VideoCore firmware on the Raspberry Pi 3. This patch adds a 32-bit port of
U-Boot for the Raspberry Pi 3.

>From U-Boot's perspective, the only delta between the RPi 2 and RPi 3 is a
change in usage of the SoC UARTs. On all previous Pis, the PL011 was the
only UART in use. The Raspberry Pi 3 adds a Bluetooth module which uses a
UART to connect to the SoC. By default, the PL011 is used for this purpose
since it has larger FIFOs than the other "mini" UART. However, this can
be configured via the VideoCore firmware's config.txt file. This patch
hard-codes use of the mini UART in the RPi 3 port. If your system uses the
PL011 UART for the console even on the RPi 3, please use the RPi 2 U-Boot
port instead. A future change might determine which UART to use at
run-time, thus allowing the RPi 2 and RPi 3 (32-bit) ports to be squashed
together.

The mini UART has some limitations. One externally visible issue in the
BCM2837 integration is that the UART divides the SoC's "core clock" to
generate the baud rate. The core clock is typically variable, and under
control of the VideoCore firmware for thermal management reasons. If the
VC FW does modify the core clock rate, UART communication will be
corrupted since the baud rate will vary from the expected value. This was
not an issue for the PL011 UART, since it is fed by a fixed 3MHz clock. To
work around this, the VideoCore firmware can be told not to modify the SoC
core clock. However, the only way this can happen and be thermally safe is
to limit the core clock to a low/minimum frequency. This leaves
performance on the table for use-cases that don't care about a UART
console. Consequently, use of the mini UART console must be explicitly
requested by entering the following line into config.txt:

    enable_uart=1

A recent version of the VC firmware is required to ensure that the mini
UART is fully and correctly initialized by the VC FW; at least
firmware.git 046effa13ebc "firmware: arm_loader: emmc clock depends on
core clock See: https://github.com/raspberrypi/firmware/issues/572".

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-01 17:17:42 -04:00
Siarhei Siamashka
7adbd1165c sunxi: Add Pine64+ support
The Pine64+ is a system based on the Allwinner A64 SoC. It is capable of
running AArch64 code and thus is the first of its kind for the sunxi target.

This patch adds a defconfig and device tree chunks for it.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
[agraf: Change patch description]
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:52:28 +02:00
Chen-Yu Tsai
7e4c5d2073 sunxi: Cubietruck Plus: Enable USB Kconfig options in defconfig
The Cubietruck Plus uses all 3 USB controllers:

  - USB OTG functions are provided by the musb USB OTG controller
  - Onboard SATA is provied by a USB-SATA bridge connected to USB1
  - The USB host ports on the board are provided by an HSIC USB hub

FLDO1 is set to 1.2V for HSIC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:52:15 +02:00
Chen-Yu Tsai
3cc7177913 sunxi: h8_homlet_v2: Enable USB Kconfig options in defconfig
The h8_homlet_v2 has 2 USB host ports, one connected to the OTG
controller, one connected to the EHCI/OHCI pair.

Also provide the card detect pin for MMC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:51:56 +02:00
Chen-Yu Tsai
5bbda173a9 sunxi: h8_homlet_v2: Set DLDO4 to 3.3V
DLDO4 supplies power to the PD pins, and the AC200 Ethernet PHY /
composite video encoder.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 17:04:03 +02:00
Chen-Yu Tsai
9c85a40c40 sunxi: h8_homlet_v2: Set DCDC1 to default voltage (3.3V)
The schematics of the h8_homlet_v2 show DCDC1 set to 3.3V. Some
Allwinner-based boards set it to 3.0V to conserve power. Since the
h8_homlet_v2 is a set-top box board with external power, there is
no such requirement.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 17:04:01 +02:00
Chen-Yu Tsai
4c6a9ca103 power: axp818: Fix DCDC5 default voltage
DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3,
1.35V for DDR3L, and 1.2V for LPDDR3.

Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 17:03:56 +02:00
Hans de Goede
affa020559 sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boards
LDO3 and LDO4 are used to power port E resp. port G, which are exposed
on gpio headers, so enable them at 2.8V as specified in the schematic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 14:38:14 +02:00
Michael Haas
53866b6fc5 sunxi: A20-OLinuXino-Lime2: Force 8211CL to master
Force master mode on the A20-OLinuXino-Lime2. This change is required
to get a reliable link at gigabit speeds.

Signed-off-by: Michael Haas <haas@computerlinguist.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 14:29:48 +02:00
Michael Haas
7e4e7e4618 sunxi: A20-Olimex-SOM-EVB: Force 8211CL to master
Force master mode for 1000BASE-T operation on the
A20-Olimex-SOM-EVB.

Karsten Merker reports that this change is necessary to get a reliable
link at gigabit speeds.

Signed-off-by: Michael Haas <haas@computerlinguist.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 14:29:41 +02:00
Tom Rini
0badc648dc Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-03-29 12:58:45 -04:00
Saksham Jain
fcfdb6d580 armv8: ls2080rdb: ls2080qds: Add secure boot support
Sec_init has been called at the beginning to initialize SEC Block
(CAAM) which is used by secure boot validation later for both ls2080a
qds and rdb. 64-bit address in ESBC Header has been enabled. Secure
boot defconfigs are created for boards (NOR boot).

Signed-off-by: Saksham Jain <saksham.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29 08:46:20 -07:00
Vasily Khoruzhick
f19eb15426 zipitz2: restore board support
zipitz2 was dropped in 49d8899ba9

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2016-03-27 09:12:55 -04:00
Peng Fan
7abeec2234 imx: mx7d: move MX7D to Kconfig entry
If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
 will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
"select MX7D" to boards using i.MX7 Dual.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-26 14:16:12 +01:00
Peng Fan
9131c18cfa imx: mx6sx: move MX6SX to Kconfig entry
If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
"select MX6SX" to boards using i.MX6 SoloX.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-03-26 14:16:12 +01:00
Stefan Roese
a7f480d92d arm: mx6: Add CCV xPress board support
This patch add support for the CCV xPress board which is equipped
with the i.MX6UL. And provides the following interfaces:

- 128MiB DDR
- UART
- I2C
- eMMC (with booting)
- Ethernet
- USB

This patch adds two build targets. One with and one without SPL. The
non-SPL version is used for loading U-Boot via USB (imx_usb_loader).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-03-26 14:16:12 +01:00
Fabio Estevam
47173483a3 warp7: Add initial support
Add the basic support for Warp7 board.

For more information about this reference design, please visit:

https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-03-26 14:16:12 +01:00
Sam Protsenko
f9d0fd8a56 usb: gadget: Move CONFIG_USB_GADGET to Kconfig
The description was borrowed from kernel. "tristate" type was changed
to "bool" (I believe we don't support modules for u-boot yet, right?).
CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along
as well.

Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Add zynq_zc702 conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-25 15:29:48 -04:00
Tom Rini
a6164205ee Merge git://www.denx.de/git/u-boot-marvell 2016-03-25 12:57:18 -04:00
Stefan Roese
aea02abec5 arm: mvebu: theadorable: Add StratixV FPGA programming support
This patch adds support for Altera StratixV bitstream programming. 2 FPGAs
are connected to the SPI busses. This patch uses board specific write
code to program the bitstream via SPI direct write mode.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-03-24 09:48:34 +01:00
Tom Rini
b5b84be8a7 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-03-23 18:35:11 -04:00
Hans de Goede
d75111a79b sunxi: Select CONFIG_OF_BOARD_SETUP from arch/arm/Kconfig
Always select OF_BOARD_SETUP on sunxi, rather then having it in almost
all our defconfigs. This also fixes it missing from some recently
added defconfigs.

This commit also modifies our ft_board_setup() to not cause warnings
when CONFIG_VIDEO_DT_SIMPLEFB is not set, since we will now always
build it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
vishnupatekar
43dea54338 sunxi: sinovoip-bpi-m3: drop LDO settings from defconfig
Kconfig default settings are same as mentioned Sinovoip
Bpi-m3 schematic.

As axp818 ALDO support is enabled, it causes bpi-m3 fail to boot
if ALDOs are set to 0.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Hans de Goede
df63651130 sunxi: Specify SATAPWR pin for Orangepi Plus
This enables the use of the sata connector in u-boot.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Hans de Goede
9284f3b452 sunxi: Enable support for the eMMC found on the orangepi plus
This enables support for the eMMC found on the orangepi plus.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Hans de Goede
ce0d092675 sunxi: Specify USB vbus pins for orangepi boards
This fixes the USB ports not working on the orangepi_plus and stops us
from messing with gpio-s which we should not touch on the orangepi_pc.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Alex Kaplan
cda192d8c2 sunxi: Enable composite video out on the CHIP
The CHIP has a composite video output in the mini-Jack connector, alongside
with the 2 audio channels. Enable this output in U-Boot.

Signed-off-by: Alex Kaplan <kaplan2539@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Boris Brezillon
83fbebf219 sunxi: Fix DCDC2 output in CHIP_defconfig
Unlike the datasheet recommendation, the R8 SoC requires a 1.4V supply
for its CPU when operating at 1Ghz.

Rely on the default value specified in the Kconfig entry.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Hans de Goede
72cd013293 sunxi: Add defconfig and dts for Orange Pi 2 SBC
The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot,
4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the
SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI,
a TRRS headphone jack for stereo out and composite out, a microphone,
an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header
and a 40-pin GPIO header.

The added dts file is identical to the one submitted to the upstream
kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Hans de Goede
d1b7407c2f sunxi: Add defconfig and dts for Dserve DSRV9703C tablet
The Dserve DSRV9703C is a 9.7" A10 tablet with a 1024x768 ips LCD,
1G RAM, 4GB flash, a Focaltech FT5406EE8 touchscreen and rtl8188ctv wifi.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Peter Korsgaard
e133c5c350 sunxi: Add defconfig for yones toptech bs1078-v2 tablet
The yones toptech bs1078-v2 is a 10.1" tablet without any clear markings on
the outside, but 'YONESTOPTECH-BS1078' written on the PCB silkscreen.

It features a 16:9 1024:600 LCD, A31s SoC, 1GB RAM, 8G NAND, silead gsl3675
touchscreen and a RTL8723AS wifi chip:

https://linux-sunxi.org/Yones_Toptech_BS1078_V2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Chen-Yu Tsai
b953a6184e sunxi: Add defconfig for Sinlinx SinA31s
The Sinlinx A31s SDK is a A31s based module/baseboard development kit.

The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
There are also pads for UART0, JTAG and I2S.

The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
buttons, RS232 style UART and USB OTG (though VBUS is not connected).
Various headers are available for other addon modules, such as SDIO
WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Stefan Roese
2772f6d55c sunxi: Add defconfig for icnova-a20-swac
The ICnova-A20-SWAC is a baseboard, equipped with the ICnova-A20 SoM from
In-Circuit:

http://wiki.in-circuit.de/index.php5?title=ICnova_A20_SODIMM
http://linux-sunxi.org/In-Circuit_ICnova_A20

This patch adds support for this board, including ethernet, LCD and USB
support.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Marcus Cooper
c7c1b4ea89 sun7i: Add defconfig for the Itead Ibox
Add defconfig for the multi board device based on the
Allwinner A20 SoC. It contains the A20 Itead Core module and a
base board for the external interfaces.

The core module comes with 4GB NAND and 1GB DDR RAM.

The base board to which the core board is connected provides
3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet
port, HDMI, IR receiver,  SPDIF and a 32-pin GPIO header. This
header expands the features of core board by exposing the VGA pins,
audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power..

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Chen-Yu Tsai
a9be871c1b sunxi: Add defconfig for Cubietruck Plus
Cubietruck Plus is a A83T/H8 based development board. The board has
standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
WiFi, headphone out / mic in, and various GPIO headers.

The board also has an EEPROM on i2c0 which holds the MAC address.

DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
is connected to the reset control of the PHY. EMAC is not actually
supported yet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-23 22:04:13 +01:00
Hans de Goede
6b3e71a38b sunxi: Add defconfig and dts for the Polaroid MID2809PXE4 tablet
The Polaroid MID2809PXE4 is a 9" tablet which is clearly marked
Polaroid MID2809PXE4 on the back. It features a 9" 16:9 800x480 LCD,
A23 Soc, 1GB RAM, 8GB NAND, gsl3670 touchscreen and esp8089 wifi.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Hans de Goede
c7e2ec4279 sunxi: Add defconfig and dts for Difrence DIT4350 tablet
The Difrnce dit4350 tablet is a tiny tablet with a 4.3" 16:9 480x272 LCD,
A13 SoC, 512M RAM, 4G NAND, solomon systech ssd2532qn6 touchscreen at
i2c1 address 0x48, Memsic MXC622X accelerometer at i2c1 address 0x15 and
rtl8188etv wifi.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Hans de Goede
84842b23b7 sunxi: Add defconfig and dts for colorfly e708 q1 tablet
The colorfly e708 q1 is a 7" tablet which is clearly marked as colorfly
e708 q1 on the back. It features a 9:16 800x1280 IPS LCD, A31s SoC,
1GB RAM, 8G NAND, ilitek 2139qt004 touchscreen on i2c-1 addr 0x41,
stk8313 accelerometer on i2c-2 addr 0x22 and a rtl8188etv wifi chip.

The added dts is identical to the dts submitted to the upstream kernel,
note this commit also syncs axp22x.dtsi and sun6i-a31.dtsi with the
upstream kernel as the added dts depends on these.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-03-23 22:04:13 +01:00
Masahiro Yamada
ea65c98050 ARM: uniphier: drop PH1- prefix from CONFIG options and file names
The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too
long.  It would not hurt to drop "PH1_" because "UNIPHIER_" already
well specifies the SoC family.  Also, rename files for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:42:13 +09:00
Bin Meng
0764f24ae6 net: Move CONFIG_RTL8169 to Kconfig
Introduce CONFIG_RTL8169 in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Stephen Warren <swaren@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-22 12:19:53 -04:00
Bin Meng
86e9dc86b1 net: Move CONFIG_RTL8139 to Kconfig
Introduce CONFIG_RTL8139 in Kconfig and move over boards' defconfig
to use that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: Fixup MPC8641HPCN* and r2dplus configs]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:19:27 -04:00
Bin Meng
6b33687995 defconfig: Reorder boards' defconfig files
Some boards' defconfig files are out of order. Clean this up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-22 12:16:31 -04:00
Stefano Babic
312a6c016a Merge branch 'next' 2016-03-20 22:04:29 +01:00
Stefan Roese
93d9fc26cb arm: socfpga: sr1500: Misc updates (SPI speed, env location)
This patch makes the following changes to the SR1500 board port:

- Update defconfig to support SPI NOR (use make savedefconfig).
- Increase SPI speed to a maximum of 100MHz for faster system
  bootup.
- Change environment location, so that its not between SPL and
  main U-Boot. This way the combined SPL / U-Boot image can
  be used for updates.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
2016-03-20 18:01:11 +01:00
Simon Glass
8b726dc945 dm: sandbox: Switch over to use DM for block devices
Now that the drivers used by sandbox support CONFIG_BLK, we can switch
sandbox over to use driver model for block devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-17 21:27:39 -06:00
Stefan Roese
82ceba2ca2 x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).

Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.

Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe

Not supported yet is:
- I2C
- USB 3.0

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:27 +08:00
Simon Glass
374e78efb0 x86: Add support for the samus chromebook
This adds basic support for chromebook_samus. This is the 2015 Pixel and
is based on an Intel broadwell platform.

Supported so far are:
- Serial
- SPI flash
- SDRAM init (with MRC cache)
- SATA
- Video (on the internal LCD panel)
- Keyboard

Various less-visible drivers are provided to make the above work (e.g. PCH,
power control and LPC).

The platform requires various binary blobs which are documented in the
README. The major missing feature is USB3 since the existing U-Boot support
does not work correctly with Intel XHCI controllers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:27 +08:00
Simon Glass
15cf75ec15 x86: gpio: Allow the pinctrl driver to set up the pin config
Rather than setting up the pin configuration in the GPIO driver, use the
new pinctrl driver to do it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Bin Meng
2830bc7d46 x86: qemu: Enable ACPI table generation by default
Now that ACPI is supported on QEMU, enable it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-17 10:27:22 +08:00
Andrew F. Davis
07adb7c227 ARM: DRA7xx: Enable NFS boot command
NFS loading works on DRA7 variants, remove the undefinition.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-15 21:30:20 -04:00
Alexander Graf
ed980b8c62 efi_loader: hook up in build environment
Now that we have all the bits and pieces ready for EFI payload loading
support, hook them up in Makefiles and KConfigs so that we can build.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
[trini: Enable only when we of OF_LIBFDT, disable on kwb and colibri_pxa270]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-15 21:30:11 -04:00
Paul Kocialkowski
e66782e6ea kc1: MUSB USB controller and fastboot USB gadget support
This adds support for the MUSB USB dual-role controller in peripheral mode,
with configuration options for the fastboot USB gadget.

At this point, flashing the internal eMMC is support.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15 15:12:52 -04:00
Paul Kocialkowski
ae51b5709e Amazon Kindle Fire (first generation) codename kc1 support
The Amazon Kindle Fire (first generation) codename kc1 is a tablet that was
released by Amazon back in 2011.

It is using an OMAP4430 SoC GP version, which allows running U-Boot and the
U-Boot SPL from the ground up.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15 15:12:48 -04:00
David Lechner
2ac07f75d1 arm: Add support for LEGO MINDSTORMS EV3
This is based on the davinci da850evm. It can boot from either the
on-board 16MB flash or from a microSD card. It also reads board
information from an I2C EEPROM.

The EV3 itself initally boots from write-protected EEPROM, so no
u-boot SPL is needed.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:40 -04:00
Nishanth Menon
6f6e9439e4 configs: k2g_evm: Add TI power processor support
Enable support for PMMC the TI power processor on K2G. This processor
manages all power management related activities on the SoC and and
allows the Operating Systems on compute processors such as ARM, DSP to
offload the power logic away into the power processor.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:39 -04:00
Simon Glass
73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
Simon Glass
69e173eb57 Move CONFIG_OF_LIBFDT to Kconfig
Move this option to Kconfig and tidy up existing boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:50:25 -04:00
Simon Glass
9e971632cd freescale: Remove CONFIG_DM from header files
Kconfig options must defined in the defconfig files. Since RSA_SOFTWARE_EXP
relies on CONFIG_DM, unless it is set in kconfig we cannot enable RSA.
Remove the hacks which enable CONFIG_DM in header files and update the
defconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:21:27 -04:00
Simon Glass
4edb9458b2 Correct defconfig ordering
Various boards have the wrong Kconfig ordering now. To avoid a misleading

diff in the next patch, reorder the configuration correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:21:27 -04:00
Akshay Bhat
f9162b15c1 arm: imx: Add support for GE Bx50v3 boards
Add support for GE B450v3, B650v3 and B850v3 boards. The boards
are based on Advantech BA16 module which has a i.MX6D processor.
The boards support:
 - FEC Ethernet
 - USB Ports
 - SDHC and MMC boot
 - SPI NOR
 - LVDS and HDMI display

Basic information about the module:
 - Module manufacturer: Advantech
 - CPU: Freescale ARM Cortex-A9 i.MX6D
 - SPECS:
     Up to 2GB Onboard DDR3 Memory;
     Up to 16GB Onboard eMMC NAND Flash
     Supports OpenGL ES 2.0 and OpenVG 1.1
     HDMI, 24-bit LVDS
     1x UART, 2x I2C, 8x GPIO,
     4x Host USB 2.0 port, 1x USB OTG port,
     1x micro SD (SDHC),1x SDIO, 1x SATA II,
     1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2

Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-03-09 12:45:42 +01:00
Daniel Schwierzeck
40a09be2e9 MIPS: pic32mzdask: use CONFIG_USE_PRIVATE_LIBGCC=y
MIPS EL boards should define CONFIG_USE_PRIVATE_LIBGCC=y to work
with EB-only toolchains like the one from kernel.org. If one do
not globally set CONFIG_USE_PRIVATE_LIBGCC=y, the build fails with:

/opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): compiled for a big endian system and target is little endian
/opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): endianness incompatible with that of the selected emulation
/opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: failed to merge target specific data of file /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o)
/opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): compiled for a big endian system and target is little endian
/opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): endianness incompatible with that of the selected emulation
/opt/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-ld.bfd: failed to merge target specific data of file /opt/gcc-4.9.0-nolibc/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o)
/work/git-trees/u-boot-mips/Makefile:1171: recipe for target 'u-boot' failed

One example for a failing build is Travis CI.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-03-09 11:54:01 +01:00
Derald D. Woods
3f53e619f0 OMAP3: am3517_evm: Add NAND MTD partitions with UBI/UBIFS support
- Add required UBI/UBIFS config definitions
- Add reasonable MTD partition layout
- Remove JFFS2 config definitions
- Drop some CFI verbage and definitions
- Make comment 'one-liners' truly one line
- Improve readability and content arrangement

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-08 15:00:40 -05:00
Paul Kocialkowski
23a004a63f sniper: Various minor cleanups, missing Kconfig configs and reorganisation
This introduces some minor cleanups, regarding aspects such as board name, code
and headers organization as well as deprecated and missing config options.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-29 14:49:37 -05:00
Masahiro Yamada
5fb87a1632 ARM: uniphier: rework UniPhier SoC select in Kconfig
The chains of "depends on <SoC_name>" in the current Kconfig is
clumsy.  The idea here is to allow users to choose a SoC group first
(SoC group consists of some SoCs that can coexist in one binary).
Then, allow to enable/disable each SoC support in the selected SoC
group.  This makes the Kconfig menu clearer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
fe7c95ee5c ARM: uniphier: merge two defconfig files
PH1-Pro5 support and ProXstream2/PH1-LD6b support can coexist in one
image and there is bit more room in SPL to accommodate all of them.
Merge uniphier_pro5_defconfig into uniphier_pxs2_defconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
4aceb3f8d4 ARM: uniphier: enable UniPhier SD/MMC host driver
Enable the driver in all UniPhier defconfig files and add some
needed defines to the common files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:15 +09:00
Masahiro Yamada
b800cbde4f ARM: uniphier: enable GPIO command and driver for UniPhier SoCs
This allows to use the "gpio" command.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-29 03:50:15 +09:00
Simon Glass
651490212a sandbox: Enable the early timer
Enable this so that tracing works with sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-26 08:53:10 -07:00
Simon Glass
c00e922530 sandbox: Correct ordering of defconfig
This has got out of order: fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Tom Rini
e1417c7b66 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-02-24 18:44:15 -05:00
Nikita Kiryanov
4067a6c8d3 arm: am437x: cm-t43: define prompt
Define prompt for cm-t43.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:06 -05:00
Nikita Kiryanov
49a934401a arm: am437x: cm-t43: support all available SPI flash chips
Add full support for SPI flash chips to future-proof U-Boot for cm-t43.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:05 -05:00
Nikita Kiryanov
7ef77c029a arm: am437x: cm-t43: migrate CONFIG_DM_SERIAL to config file
Move CONFIG_DM_SERIAL to cm_t43_defconfig. This forces us to update the
CONFIG_SYS_NS16550_REG_SIZE value for SPL.

Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:05 -05:00
Hannes Schmelzer
be0be08802 board/BuR: move everything possible from board's headerfile to KConfig
We drop everything possible things from board headerfiles and replace
this functionality with responsible settings in Kconfig (_defconfig).

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:02 -05:00
Hannes Schmelzer
a9a85fcc7b board/BuR: use default u-boot prompt on all B&R boards
There is no need to have some specific prompt, so we drop this within
defconfigs.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-24 18:44:02 -05:00
Vikas Manocha
e66c49fa93 stm32: add support for stm32f7 & stm32f746 discovery board
This patch adds support for stm32f7 family & stm32f746 board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24 18:43:57 -05:00
Alison Wang
70097027d2 arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS board
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported
in SD boot now. For the customer's demand, QSPI needs to be supported
in SD boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig
is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig
is used to support QSPI in SD boot.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24 08:40:56 -08:00
York Sun
2f7d70082c arm: ls1021aqds: Enable driver model lpuart serial driver
Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart
to driver model suport. Enable lpuart port driver.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Alison Wang <alison.wang@nxp.com>
CC: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-02-24 08:40:15 -08:00
Tom Rini
52dd704bf8 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-02-23 15:35:47 -05:00
Jelle van der Waa
dc44fd8ae4 sunxi: H3: Add support for the host usb-phys
Add support for phy 1-3.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
[hdegoede@redhat.com: use setclrbits_le32 instead of read-modify-write]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23 20:59:10 +01:00
Jelle van der Waa
0d8382ae70 sunxi: power: add support for sy8106a driver
SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.

This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23 20:50:07 +01:00
York Sun
d83b47b778 arm: ls1021aqds: Convert to driver model and enable serial support
Split duart configuration as device tree file. Move /chosen node
out of board commone device tree. Convert ls1021aqds nor and SD
configurations to driver model support (qspi already uses DM).
Enable ns16550 DM serial driver for nor configurations.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Alison Wang <alison.wang@nxp.com>
CC: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
2016-02-23 08:08:15 -08:00
Tom Rini
b625fab706 Merge branch 'master' of git://git.denx.de/u-boot-spi 2016-02-23 08:13:46 -05:00
Mugunthan V N
4942ba2318 defconfig: am437x_sk_evm: enable dma driver model
enable dma driver model for am437x_sk_evm as ti-edma3 supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-02-23 16:14:46 +05:30
Michal Simek
ce0335f2b4 mmc: Kconfig: Add Arasan SDHCI entry
Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:02 +01:00
Tom Rini
595af9db24 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-02-21 07:56:16 -05:00
Peng Fan
35c4ce5e20 imx: mx7d: isolate resources to domain 0 for A7 core
In current design, if any peripheral was assigned to both A7 and M4,
it will receive ipg_stop or ipg_wait when any of the 2 platforms
enter low power mode. We will have a risk that, if A7 enter wait,
M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait
asserted same time. Also if M4 enters stop mode, A7 will have no
chance to access the peripheral.
There are 26 peripherals affected by this IC issue:
SIM2(sim2/emvsim2)
SIM1(sim1/emvsim1)
UART1/UART2/UART3/UART4/UART5/UART6/UART7
SAI1/SAI2/SAI3
WDOG1/WDOG2/WDOG3/WDOG4
GPT1/GPT2/GPT3/GPT4
PWM1/PWM2/PWM3/PWM4
ENET1/ENET2
Software Workaround:
The solution is to set the peripherals to Domain0 by A core, since A core
in Domain0. The peripherals which will be used by M4, will be set to Domain1
by M4.
For example, A core set WDOG4 to domain0, but when M4 boots up, M4 will
set WDOG4 to domain1, because M4 will use WDOG4.

So the peripherals are not shared by them. This way requires
the uboot implemented the RDC driver and set the 26 IPs above
to domain 0 only. M4 image will set the M4 to domain 1 and
set peripheral which it will use to domain 1.

This patch enables the CONFIG_IMX_RDC and CONFIG_IMX_BOOTAUX for
i.MX7D SABRESD board, and setup the 26 IP resources to domain 0.

Signed-off-by: Ye.Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2016-02-21 11:46:26 +01:00
Bin Meng
a2e3b05e16 x86: Add Intel Cougar Canyon 2 board
This adds basic support to Intel Cougar Canyon 2 board, a board
based on Chief River platform with an Ivy Bridge processor and
a Panther Point chipset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-21 13:42:52 +08:00
Tom Rini
20680b560a Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-02-20 17:32:48 -05:00
Alexey Brodkin
379b3280b3 arc: cache - accommodate different L1 cache line lengths
ARC core could be configured with different L1 and L2 (AKA SLC) cache
line lengths. At least these values are possible and were really used:
32, 64 or 128 bytes.

Current implementation requires cache line to be selected upon U-Boot
configuration and then it will only work on matching hardware. Indeed
this is quite efficient because cache line length gets hardcoded during
code compilation. But OTOH it makes binary less portable.

With this commit we allow U-Boot to determine real L1 cache line length
early in runtime and use this value later on. This extends portability
of U-Boot binary a lot.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-02-20 11:19:53 +03:00
Gregory CLEMENT
522e4fbb76 ARM: Add Support for the VInCo platform
The Versatile Industrial Communication platform is a community oriented
board from Landis + Gyr. It comes with:
- an RS-485 port
- 2 Ethernet ports
- a wireless M-BUS
- a 4G modem
- a 4MB SPI flash
- a 4GB eMMC

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
[rebase on current TOT]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-19 15:12:13 +01:00
Marek Vasut
c21c28b6f3 arm: at91: Add support for DENX MA5D4 SoM and EVK
Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the
Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI
CAN controllers and DRAM, the baseboard contains UART connectors,
ethernet port, microSD slot, LCD header, 2x CAN connector and a
lot of expansion headers.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-18 21:34:41 +01:00
Matthias Michel
b96fd82501 siemens,at91: enable features for smartweb
New features for smartweb:
* switch to hush command parser
* change autoboot stop to <ESC><ESC>
* allow to write ethaddr

Signed-off-by: Matthias Michel <matthias.michel@siemens.com>
Reviewed-by: Samuel Egli <samuel.egli@siemens.com>
Cc: Roger Meier <r.meier@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-18 21:34:41 +01:00
Simon Glass
41fa035ce1 tegra: Convert CONFIG_PWM_TEGRA to Kconfig
Move this option to Kconfig and clean up the header files. Adjust the only
user (the LCD driver) to work with the new driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:53 -07:00
Simon Glass
9e6866d3b6 tegra: video: Convert tegra20 LCD driver to driver model
Move this driver over to use driver model. This involves rearranging the
code somewhat. The effect is that everything is run from the probe() method.

Boards which use this are fixed up, but only seaboard is tested.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:52 -07:00
Simon Glass
d2f906500e tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20
This option refers only to the tegra20 video driver, so name it as such
to avoid confusion with tegra124.

Also move this option to Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:51 -07:00
Simon Glass
d76592122b tegra: nyan-big: Move the LCD driver to driver model
Adjust the driver to use driver model. The SOR becomes a bridge device. We
use the normal simple_panel driver to handle the display itself. We also
need to enable some options such as regulators, PWMs and DM_VIDEO itself.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:51 -07:00
Tom Rini
823ecd72bb Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2016-02-14 08:39:32 -05:00
Masahiro Yamada
cd0847fe63 ARM: uniphier: switch over to generic EHCI driver
The UniPhier EHCI driver (drivers/usb/host/ehci-uniphier.c) does
nothing special but set the base address and handle reset/clock.

Since commit 4feefdcfe9 ("usb: add clock support for generic EHCI"),
the generic one (drivers/usb/host/ehci-generic.c) can do those, too.

We no longer need to stick to the dedicated driver.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:51:07 +09:00
Siva Durga Prasad Paladugu
78cb965af0 zynqmp: nand: Add Nand driver support for zynqmp
Add nand driver support for zynqmp. The Nand
controller used in ZynqMP is Arasan Nand Flash
controller.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
[scottwood: Fix checkpatch warning]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-12 17:27:28 -06:00
Mugunthan V N
ab8dd5e6e6 defconfig: k2g_evm_defconfig: enable net driver model
enable net driver model for k2g evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08 10:10:48 -05:00
Mugunthan V N
15b0d65938 defconfig: k2e_evm_defconfig: enable net driver model
enable net driver model for k2e evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08 10:10:47 -05:00
Mugunthan V N
95fac767a9 defconfig: k2l_evm_defconfig: enable net driver model
enable net driver model for k2l evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08 10:10:47 -05:00
Mugunthan V N
9a350e92a6 defconfig: k2hk_evm_defconfig: enable net driver model
enable net driver model for k2hk evm as keystone_net supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08 10:10:46 -05:00
Adam Ford
2cd1ff8403 OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting
The defconfig patch will enable the the SPL and NAND settings.
The update to Kconfig will allow the SPL to configured in and
built.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08 10:10:39 -05:00
Tom Rini
57dc53a724 Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging 2016-02-08 09:48:04 -05:00
Ricardo Ribalda
1a9115ecfe ppc: xilinx-ppc405-generic
Fix device tree name:

+(xilinx-ppc405-generic) Device Tree Source is not correctly specified.
+(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE'
+(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>'
argument
+(xilinx-ppc405-generic) make[2]: ***
[arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1
+(xilinx-ppc405-generic) make[1]: *** [dts] Error 2

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06 15:41:18 +01:00
Simon Glass
c4a45d4bdd rockchip: Drop old CONFIG_VIDEO_ROTATION option
The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards
were not updated. However this option is is not needed by default for
Rockchip since we don't need a rotated console for current boards. So just
remove the old option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06 14:17:11 +01:00
Bin Meng
971611e3ef x86: chromebox_panther: Convert to use driver model ethernet
This board uses RTL8169 which is a driver model ethernet driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05 12:47:24 +08:00
Bin Meng
e1d1b62be1 efi: app: Clean up defconfig
Move some #undef from efi-x86.h to efi-x86_defconfig as these are
already Kconfig options.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05 12:47:23 +08:00
Bhuvanchandra DV
dbac20c191 arm: vybrid: Update defconfig's
Let's go with pure DT solution for board's
based on NXP/Freescale Vybrid platform.

- Merge the DT defconfig with non-DT defconfig for Toradex
  Colibri VF50/VF61 and drop the non-DT defconfig.
- Update the legacy defconfigs for NXP/Freescale VF610 Tower
  Board with DT.
- Update the legacy defconfigs for Phytec phyCORE-vybrid
  Board with DT.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-02 21:36:09 +01:00
Ye Li
cf94a3427a imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board
Initial version for mx6sx SABREAUTO board support with features:
PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander.

Signed-off-by: Ye Li <ye.li@nxp.com>
2016-02-02 21:04:21 +01:00
Tom Rini
161b1fe745 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-02-02 07:24:52 -05:00
Wenyou Yang
37dadbca0c board: atmel: sama5d2_xplained: add SPL support
The sama5d2 Xplained SPL supports the boot medias: spi flash
and SD Card.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-02 11:49:13 +01:00
Purna Chandra Mandal
7d514a7407 board: Enable ethernet, tftpboot support to pic32mzdask board.
This adds ethernet, TFTP support for PIC32MZ[DA] Starter Kit. Also
custom environment variables/scripts are added to help boot from network.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-02-01 22:14:02 +01:00
Purna Chandra Mandal
c76eb72c43 board: add SDHCI support for PIC32MZDASK board.
Enable MMC, SDHCI, FAT_FS support for PIC32MZ[DA] StarterKit.
Also add custom scripts, rules to boot Linux from microSD card.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-02-01 22:14:02 +01:00
Purna Chandra Mandal
44da3a176c board: Add Microchip PIC32MZ[DA]-Starter-Kit board.
This adds support for Microchip PIC32MZ[DA] StarterKit board
based on a PIC32MZ[DA] family of microcontroller.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-02-01 22:14:01 +01:00
Simon Glass
8df8dad528 video: sandbox: Enable truetype fonts for sandbox
Enable this feature so that truetype fonts can be used on the sandbox
console. Update the tests to select the normal/rotated console when needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-30 10:58:26 +01:00
Simon Glass
6e42e25196 video kconfig console_normal
Signed-off-by: Simon Glass <sjg@chromium.org>
[agust: rebased on current master]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-30 10:03:01 +01:00
Tom Rini
cd85bec36d Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-01-27 15:05:36 -05:00
Tom Rini
19bde0316f Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-01-27 15:05:12 -05:00
Qianyu Gong
b0f20caf65 armv8/ls1043aqds: add QSPI boot support
Enable the U-Boot Driver Model(DM) to use the Freescale QSPI driver.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:29:09 -08:00
Gong Qianyu
166ef1e90c armv8/ls1043aqds: add QSPI support in SD boot
QSPI and IFC are pin-multiplexed on LS1043A. So we use
ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and
ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:28:55 -08:00
Gong Qianyu
e0579a5852 armv8/ls1043aqds: add DSPI support
Enable three DSPI flash memories on board.

Commands:
=> sf probe 1:0
SF: Detected N25Q128A with page size 256 Bytes,
				erase size 64 KiB, total 16 MiB
=> sf probe 1:1
SF: Detected SST25WF040B with page size 256 Bytes,
				erase size 4 KiB, total 512 KiB
=> sf probe 1:2
SF: Detected EN25S64 with page size 256 Bytes,
				erase size 64 KiB, total 8 MiB

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:28:49 -08:00
Wenbin Song
2970e14f65 armv8/ls1043aqds: Add lpuart support
Add lpuart support using the driver model.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:13:12 -08:00
Wenbin Song
8e728aa915 armv8/ls1043aqds: Spilt off board device tree
Move new /chosen node out of the board device tree.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:13:12 -08:00
Ricardo Ribalda Delgado
f36919a813 ppc: xilinx-ppc440-generic: Wire LL_TEMAC driver
If the xparameters file contains a LL_TEMAC definition compile its
driver and the net commands.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:20 +01:00
Ricardo Ribalda Delgado
80cce2629b ppc: xilinx-ppc4xx: Port to DM serial
xilinx_uartlite has been ported to DM, this patch makes the
xilinx-ppc405-generic and the xilinx-ppc440-generic boards use the new
DM driver.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:57:11 +01:00
Michal Simek
1c5e069b6f ARM: zynq: Fix defconfig for zybo
Change possition of SPI_FLASH to by align with savedefconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Michal Simek
dce7e11fe1 ARM: zynq: Move FLASH_BAR to Kconfig
Clean up config and use Kconfig more.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Michal Simek
448bce733c ARM: zynq: Enable SPI_FLASH for zc770 xm013 platform
Enable SPI flash.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Siva Durga Prasad Paladugu
c5ca2db63b ARM: zynq: Define sys prompt for all Zynq boards
Define CONFIG_SYS_PROMPT for all Zynq boards

It was removed by:
"kconfig: add config option for shell prompt"
(sha1: 181bd9dc61)

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Michal Simek
077fe0f5e7 microblaze: Enable HUSH via Kconfig
Cleanup board file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:53 +01:00
Michal Simek
b11ec1ab9a microblaze: Move CONFIG_NETCONSOLE to Kconfig
Cleanup board file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:53 +01:00
Michal Simek
27f24a3d62 microblaze: Remove CONFIG_FIT from board file
And enable it via defconfig by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:53 +01:00
Michal Simek
502547e8ba microblaze: Move eth configuration to Kconfig
Cleanup board specific file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:53 +01:00
Michal Simek
83b76d9ef7 microblaze: Enable axi emac via Kconfig
Enable driver by default for all platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:53 +01:00
Michal Simek
3229c869aa net: emaclite: Move emaclite to Kconfig
Add PHYLIB and MII dependencies and enable it by default for Microblaze.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27 15:55:52 +01:00
Michal Simek
d538ee1b54 net: emaclite: Move driver to DM
Move driver to DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-27 15:55:52 +01:00
Michal Simek
9040f4eeb9 microblaze: Enable PHYLIB via Kconfig
Cleanup board configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:49 +01:00
Michal Simek
f0e353ce55 microblaze: Enable uart16550 DM by default
Microblaze is uses uartlite or uart16550 as console drivers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:49 +01:00
Michal Simek
54e24d3332 serial: uartlite: Add uartlite to Kconfig
- Move config option out of board file.
- Remove uartlite address from config file

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Michal Simek
93768393d7 serial: uartlite: Move driver to DM
Enable SPL DM too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Ricardo Ribalda Delgado
3a40457f23 ppc: ppc405: ppc405-generic_flash_defconfig
Remove redundant defconfig file. Boot via flash can be configured via
Kconfig.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:32:05 +01:00
Ricardo Ribalda Delgado
093eb5daae ppc: ppc440: ppc440-generic_flash_defconfig
Remove redundant defconfig file. Boot via flash can be configured via
Kconfig.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:32:05 +01:00
Ricardo Ribalda Delgado
583aefb89c xilinx-ppc440: Remove support for v5fx30teval
It is just a specialized version of xilinx-ppc440

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:32:04 +01:00
Ricardo Ribalda Delgado
70c29dcdbc ppc: xilinx-ppc405: Remove support for fx12mm
It is just a specialized version of the xilinx-ppc405

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:32:04 +01:00
Ricardo Ribalda Delgado
9ac0efd292 ppc: xilinx-ppc440: Remove support for ml507
ml507 is just a specialized version of the xilinx-ppc440-generic

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:32:04 +01:00
Stefan Roese
b20c38a973 arm: mvebu: Add support for the Armada XP theadorable board
This patch adds support for the Armada XP (MV78260) based theadorable
board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR,
LCD and SATA (SSD) interfaces / devices.

Two defconfigs are added:

theadorable_defconfig:
The production U-Boot version with a stripped down drivers and feature
list. This removes networking, USB and PCI support.

theadorable_debug_defconfig:
The debugging / testing U-Boot version with full support for all drivers.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Stefan Roese <sr@denx.de>
2016-01-27 07:45:43 +01:00
Tom Rini
9e4de7fd4a Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-01-26 17:45:37 -05:00
Hans de Goede
54be0f0578 sunxi: Bananapro: Set LDO4 to 2.5V
According to the Bananapro schematic VDD25-SATA either comes from a
dedicated WL2003E25-5 LTO, or it is connected to LDO4 via a
0 Ohm resistor.

In practice it seems that LDO4 is used, so enable it and set it to 2.5V.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Chen-Yu Tsai
f7b4fff3f0 sunxi: h8_homlet_v2: Drop LDO settings from defconfig
The LDO settings in this defconfig are either wrong (ALDOs must not be 0)
or the same as Kconfig defaults.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Vishnu Patekar
cd7aa27bec sunxi: Add suport for A83T based Banana-pi M3 Board
Add dts and defconfig for Banana-pi M3 board.

It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI,
mic, AP6212 Wifi, etc on it.
It is paired with AXP813 PMIC which is almost same as AXP818.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
[hdegoede@redhat.com: rename to Sinovoip_BPI_M3_defconfig/sun8i-a83t-sinovoip-bpi-m3.dts]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-26 16:20:05 +01:00
Tom Rini
b72ae192e3 Merge branch 'master' of git://git.denx.de/u-boot-video 2016-01-26 09:48:07 -05:00
Anatolij Gustschin
7588c31252 video: add CONFIG_I2C_EDID and disable CONFIG_DISPLAY by default
Enabling CONFIG_DISPLAY breaks building for some architectures
(microblaze-generic), so we disable CONFIG_DISPLAY in Kconfig
by default and enable this option in defconfigs. CONFIG_DISPLAY
depends on CONFIG_I2C_EDID, so add and enable it in defconfigs, too.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reported-by: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-01-26 08:06:13 +01:00
Simon Glass
98655f3a8d x86: Set up a shared syscon numbering schema
Each system controller can have a number to identify it. It can then be
accessed using syscon_get_by_driver_data(). Put this in a shared header
file and update the only current user.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:09:42 +08:00
Simon Glass
b32375d070 x86: chromebook_link: Enable the syscon uclass
We will use a system controller to model the Intel Management Engine. Enable
this for link.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:09:41 +08:00
Simon Glass
0c7645bde0 x86: ivybridge: Use the I2C driver to perform SMbus init
Move the init code into the I2C driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:09:41 +08:00
Simon Glass
433650a2fc x86: Enable DM_USB for link and panther
Move these two boards to use driver model for USB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:09:40 +08:00
Simon Glass
bba22a97a7 x86: ivybridge: Use common CPU init code
The existing ivybridge code predates the normal multi-core CPU init, and
it is not used. Remove it and add CPU nodes to the device tree so that all
four CPUs are set up. Also enable the 'cpu' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:08:17 +08:00
Simon Glass
7c1058fadc rockchip: Add support for Raxda Rock 2
This board includes an RK3288 SoC on a SOM. It can be mounted on a
base-board which provides a wide range of peripherals.

So far this is verified to boot to a prompt from a microSD card. The serial
console works as well as HDMI.

Thanks to Tom Cubie for sending me a board.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:37 -07:00
Simon Glass
889b8a3147 rockchip: firefly-rk3288: Enable HDMI output
Enable HDMI output and a console on firefly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:37 -07:00
Simon Glass
74336f7daa rockchip: jerry: Enable EDP and HDMI video output
Enable these devices using the VOPL video output device. We explicitly
disable VOPB in the device tree to avoid it taking over. Since this device
has an LCD display this comes up by default. If the display fails for some
reason then it will attempt to use HDMI. It is possible to force it to fail
(and thus fall back to HDMI) by puting 'return -EPERM' at the top of
rk_edp_probe(). For now there is no easy way to select between the two.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:37 -07:00
Simon Glass
dae594f210 rockchip: spl: Support full-speed CPU in SPL
Add a feature which speeds up the CPU to full speed in SPL to minimise
boot time. This is only supported for certain boards (at present only
jerry).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:37 -07:00
Simon Glass
2dcf143398 dm: video: Repurpose the 'displayport' uclass to 'display'
The current DisplayPort uclass is too specific. The operations it provides
are shared with other types of output devices, such as HDMI and LVDS LCD
displays.

Generalise the uclass so that it can be used with these devices as well.
Adjust the uclass to handle the EDID reading and conversion to
display_timing internally.

Also update nyan-big which is affected by this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:36 -07:00
Simon Glass
27a1961d0b rockchip: jerry: Enable the Chrome OS EC
Turn on the EC and enable the keyboard.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:36 -07:00
Simon Glass
69a050483e rockchip: jerry: Drop unused options
To reduce the SPL image size, drop the LED features. Jerry does not have
an LED and we can leave out GPIO support also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Simon Glass
7991809c98 rockchip: Disable simple-bus in SPL for firefly-rk3288, jerry
This is not needed for booting, so drop it from SPL to save about 300 bytes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Simon Glass
156ac85e1d rockchip: jerry: Enable the RK808 PMIC and regulator
Enable this PMIC and regulator, which is used on jerry.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Simon Glass
9c56d6f71e rockchip: Move firefly and jerry to use the full pinctrl
Use the full pinctrl driver in U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:35 -07:00
Simon Glass
898d64395c rockchip: Use a separate clock ID for clocks
At present we use the same peripheral ID for clocks and pinctrl. While this
works it is probably better to use the device tree clock binding ID for
clocks. We can use the clk_get_by_index() function to find this.

Update the clock drivers and the code that uses them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Simon Glass
79d020ee74 rockchip: Use pwrseq for MMC start-up on jerry
This is defined in the device tree in Linux. Copy over the settings so that
this can be used instead of hard-coding the reset line.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Simon Glass
ec4ac4e7c0 rockchip: Correct the defconfig order
This has got out of sequence somehow. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Tom Rini
6905f4d3c7 Merge git://git.denx.de/u-boot-dm 2016-01-21 11:49:49 -05:00
Jelle van der Waa
9d0826879e sunxi: Add support for the I2C controller which is part of the PRCM
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
[hdegoede@redhat.com: Minor cleanups]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

applied with fixing 2 checkpatch warnings:
WARNING: please, no space before tabs

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-01-21 07:30:01 +01:00
Simon Glass
85e08db85b dm: video: test: Add tests for rotated consoles
Test that text is displayed correctly when the console is rotated.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Simon Glass
3ade5bc4dc dm: video: sandbox: Convert sandbox to use driver model for video
Now that driver model support is available, convert sandbox over to use it.
We can remove a few of the special hooks that sandbox currently has.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Simon Glass
1e69ad014c sandbox: Move CONFIG_VIDEO_SANDBOX_SDL to Kconfig
Move this option to Kconfig. This is quite simple as only sandbox uses the
driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-20 19:10:16 -07:00
Bin Meng
665ac00c98 arm: ls1021atwr: Enable driver model lpuart serial driver
Convert ls1021atwr_nor_lpuart to driver model support. As a start,
enable lpuart serial port driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
Tested-by: Alison Wang <alison.wang@nxp.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:15 -07:00
Bin Meng
8b67761437 arm: ls1021atwr: Split off board device tree
Move /chosen node out of the board device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Bin Meng
5ed07cf53c serial: lpuart: Move CONFIG_FSL_LPUART to Kconfig
LPUART is seen on Freescale VF610 and QorIQ Layerscape devices.
Create a Kconfig option and move it to defconfig for all boards
that have this serial driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Bin Meng
f833cd6279 arm: ls1021atwr: Convert to driver model and enable serial support
Convert ls1021atwr_nor to driver model support. As a start, enable
ns16550 serial port driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:10:14 -07:00
Mugunthan V N
9ab401ae0e defconfig: dra74_evm: enable timer driver model
Enable timer driver model for dra74_evm_defconfig as omap-timer
supports driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 19:06:22 -07:00
Mugunthan V N
09bdea0188 defconfig: dra72_evm: enable timer driver model
Enable timer driver model for dra72_evm_defconfig as omap-timer
supports driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 19:06:22 -07:00
Mugunthan V N
00dffc9abe defconfig: am335x_gp_evm: enable timer driver model
Enable timer driver model for am335x_gp_evm as omap-timer supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 19:06:22 -07:00
Mugunthan V N
3f8e517135 defconfig: am335x_boneblack_vboot: enable timer driver model
Enable timer driver model for am335x_boneblack_vboot as
omap-timer supports driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 19:06:21 -07:00
Mugunthan V N
49d3fe52e2 defconfig: am437x_gp_evm: enable timer driver model
Enable timer driver model for am437x_gp_evm as omap-timer supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 19:06:21 -07:00
Mugunthan V N
fb912c6f95 defconfig: am437x_sk_evm: enable timer driver model
Enable timer driver model for am437x_sk_evm as omap-timer supports
driver model.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 19:06:21 -07:00
Vikas Manocha
0a61ee880c stm32: move stm32 specific code to mach-stm32
This patch moves stm32 sources at one place, with this armv7m now contains
only generic stuff.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-01-20 10:19:41 -05:00
robertcnelson@gmail.com
07684b995b am335x: BeagleBones enable CONFIG_AUTOBOOT_KEYED
On startup, the BeagleBone family of boards can occationally halt at
the U-Boot prompt.  Due to U-Boot receiving random data on the usart.

Migrate BeagleBone based boards to use CONFIG_AUTOBOOT_KEYED, user
will now have to enter the <SPACE> key to get to U-Boot prompt

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Craig McQueen <craig.mcqueen@innerrange.com>
CC: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20 10:19:40 -05:00
Enric Balletbò i Serra
8a1c1043d5 igep00x0: enable CONFIG_NET_RANDOM_ETHADDR
Enable CONFIG_NET_RANDOM_ETHADDR to generate a random MAC address
when ETHADDR is not set.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-01-20 10:19:38 -05:00
Masahiro Yamada
b766476df0 microblaze: move CONFIG_SYS_TEXT_BASE to defconfig
This is how CONFIG options are defined by Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-01-20 10:19:35 -05:00
Masahiro Yamada
c6e18144b6 m68k: move CONFIG_SYS_TEXT_BASE to defconfig files
For historical reason, CONFIG_SYS_TEXT_BASE has been specified
in various ways:

[1] by board/${VENDOR}/${BOARD}/config.mk

[2] by CONFIG_SYS_EXTRA_OPTIONS
    (This was "options" field of boards.cfg before Kconfig conversion)

[3] by include/configs/${BOARD}.h

[4] by configs/${BOARD}_defconfig

Most of M68K boards use either [1] or [2], both of which we want to
deprecate.  Switch them into [4], which is the newest way (Kconfig).

We still allow [3] too, because it is still used by many boards and
we expect much time for conversion.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Angelo Dureghello <angelo at sysam.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-20 10:19:34 -05:00
Sergey Temerkhanov
746f985add armv8: cavium: Add ThunderX 88xx board definition
This commit adds basic Cavium ThunderX 88xx board definitions and support.

Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
[trini: Drop CONFIG_SYS_GENERIC_BOARD define]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 22:25:56 +00:00
Tom Rini
b5db3c2c7e axm/taurus: Enable tiny printf in SPL
Both of these boards are very close to their limit and with some toolchains
such as gcc 5.x are too large.  Switch to tiny printf to reclaim some size.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:16 -05:00
Tom Rini
947c626dc5 vsprintf.c: Always enable CONFIG_SYS_VSNPRINTF
Enabling this function always removes some class of string saftey issues.
The size change here in general is about 400 bytes and this seems a reasonable
trade-off.

Cc: Peng Fan <peng.fan@nxp.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Adrian Alonso <aalonso@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:16 -05:00
Tom Rini
f46c25583a Merge git://www.denx.de/git/u-boot-marvell
Conflicts:
	arch/arm/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-14 11:23:05 -05:00
Phil Sutter
aefb8f4c32 mvebu: Support Synology DS414
This adds support for the MV78230 based DS414 NAS by Synology. The
relevant bits have been extracted from the 'synogpl-5004-armadaxp'
package Synology kindly published, garnished with a fair amount of
trial-and-error.

Sadly, support is far from perfect. The major parts I have failed in
are SATA and XHCI support. Details about these and some other things
follow:

Device Tree
-----------

The device tree file armada-xp-synology-ds414.dts has been copied from
Linux and enhanced by recent U-Boot specific changes to
armada-xp-gp.dts.

SATA Support
------------

There is a Marvell 88SX7042 controller attached to PCIe which is
supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv.
I'm not sure if extending the latter to support PCI devices is worth the
effort at all. Porting sata_mv from Linux exceeded my brain's
capacities. :(

XHCI Support
------------

There is an EtronTech EJ168A XHCI controller attached to PCIe which
drives the two rear USB3 ports. After a bit of playing around I managed
to get it recognized by xhci-pci, but never was able to access any
devices attached to it. Enabling it in ds414 board config shows that it
does not respond to commands for whatever reason. The (somewhat) bright
side to it is that it is not even supported in Synology's customized
U-Boot, but that also means nowhere to steal the relevant bits from.

EHCI Support
------------

This seems functional after issuing 'usb start'. At least it detects USB
storage devices, and IIRC reading from them was OK. OTOH Linux fails to
register the controller if 'usb start' wasn't given before in U-Boot.

According to Synology sources, this board seems to support USB device
(gadget?) mode. Though I didn't play around with it.

PCIe Support
------------

This is fine, but trying to gate the clocks of unused lanes will hang
PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI.

DDR3 Training
-------------

Marvell/Synology uses eight PUPs instead of four. Does not look like
this is meant to be customized in mainline U-Boot at all. OTOH I have
no idea what a "PUP" actually is.

PEX Init
--------

Synology uses different values than mainline U-Boot with this patch:
pex_max_unit_get returns 2, pex_max_if_get returns 7 and
max_serdes_lines is set to 7. Not changing this seems to not have an
impact, although I'm not entirely sure it does not cause issues I am not
aware of.

Static Environment
------------------

This allows to boot stock Synology firmware at least. In order to be a
little more flexible when it comes to booting custom kernels, do not
only load zImage partition, but also rd.gz into memory. This way it is
possible to use about 7MB for kernel with piggyback initramfs.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-14 14:08:59 +01:00
Stefan Roese
e5f0a64034 arm: mvebu: Remove SYS_MALLOC_CLEAR_ON_INIT from DB-MV784MP-GP AXP board
By removing CONFIG_SYS_MALLOC_CLEAR_ON_INIT, the bootup time is a bit
faster.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Stefan Roese
0299c90f39 arm: mvebu: Add SolidRun ClearFog Armada 38x initial support
This patch adds basic support for the SolidRun ClearFog Armada 38x based
board to mainline U-Boot. Supported interfaces / devices are:
- DDR3
- UART
- MMC
- Ethernet port 0 (connected to dedicated PHY)
- I2C

The included DT source was taken from Russell King's ftp server:
http://www.home.arm.linux.org.uk/~rmk/clearfog/

With only minor modifications, like the addition of some aliases and the
"u-boot,dm-pre-reloc" property.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Stefan Roese
18c1272f99 arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm board
This is needed for the upcoming ethernet DM conversion of the maxbcm
board. The configuration of the PHY is then extracted from the DT
instead of using the defines from the config header.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Stefan Roese
6451223a8d arm: mvebu: Add DM and OF_CONTROL support to SPL
This patch adds full DM support to the SPL on MVEBU. Currently
only serial is supported. Other drivers will follow.

This patch also adds the necessary config values for the DEBUG UART
to the MVEBU defconfig files. This came in handy while implementing
this DM support.

Additionally, the mvebu specific SPL linker script is removed and
this common one is used instead:

   arch/arm/cpu/u-boot-spl.lds

This common linker script already handles all special cases. No need
to reinvent the wheel for MVEBU here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
2016-01-14 14:08:59 +01:00
Marco Schuster
247be79a99 Re-enable setexpr on Raspberry Pi
This patch re-enables the setexpr command, I don't really understand
why it got excluded in the first place.

setexpr can be used e.g. to implement failed-boot-counters and
failovers to rescue firmware.

Signed-off-by: Marco Schuster <m.schuster91@googlemail.com>
2016-01-13 21:05:26 -05:00
Vladimir Zapolskiy
1222305b55 arm: lpc32xx: switch SPL builds to driver model
For NXP LPC32xx boards the change enables SPL_DM option, this allows
to use any driver model UART driver in SPL images, hence a restriction
on HSUART in SPL image is removed and well as definitions for non-DM
NS16550 driver, its DM version is used instead.

Because SPL_DM requires malloc(), enable CONFIG_SPL_SYS_MALLOC_SIMPLE
for LPC32xx boards.

The change adds about 5KB to the resulting SPL image (for devkit3250
board SPL image is increased from 10672 to 15608 bytes).

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-13 21:05:22 -05:00
Vladimir Zapolskiy
d25ba89e8b arm: lpc32xx: switch serial console to driver model
On NXP LPC32xx platform for non-SPL builds the change adds
standard (NS16550) and high-speed UARTs to driver model.
Due to specific of DM NS16550 device description UART clock can not be
got in runtime and by default it is set to 13MHz, if board PERIPH_CLK
is different, this should be specified in board configuration file.

For SPL builds HSUARTs are disabled and non-DM NS16550 driver is
compiled, if needed.

The change also updates default configs of devkit3250 and work_92105
boards to reflect updates in platform files.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-13 21:05:22 -05:00
Tom Rini
20d08f59fa Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze 2016-01-13 21:05:17 -05:00
Mugunthan V N
e101af014b defconfig: am437x_sk_evm: enable spi driver model
enable spi driver model for am437x_sk_evm as ti_qspi supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-01-13 18:47:28 +05:30
Mugunthan V N
7c69ad6b46 defconfig: dra74_evm: enable spi driver model
enable spi driver model for dra74_evm as ti_qspi supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-01-13 18:47:28 +05:30
Mugunthan V N
36de4bed10 defconfig: dra72_evm: enable spi driver model
enable mmc driver model for dra72_evm as ti_qspi supports
driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-01-13 18:47:28 +05:30
Nathan Rossi
fc82edd844 arm: socfpga: Enable SPL_DM_SEQ_ALIAS for all SOCFPGA configs
This feature is required in SPL to enable support for loading from SPI
flash.

Also clean up the #define in socfpga_common.h.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin-Liang See <clsee@altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13 13:20:03 +01:00
Nathan Rossi
5c9b1d735e arm: zynq: Enable SPL_DM_SEQ_ALIAS for all Zynq configs
This feature is required in SPL to enable support for loading from SPI
flash when the device is booted from QSPI.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13 13:20:02 +01:00
Simon Glass
9b20519887 rockchip: Use the debug UART on rk3036
Rather than using a new debug UART implementation, use the standard one
provided by U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-12 10:19:09 -07:00
Simon Glass
dd8e42900b rockchip: Fix the configuration for chromebook_jerry
Various updates did not make it through to this board. Also the instructions
for building a SPI image are no-longer correct. Fix these so that Jerry can
boot to a prompt again.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-08 07:59:07 -07:00
Tom Rini
78680314c5 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-12-27 09:15:57 -05:00
Hans de Goede
e7d6aa0b74 sunxi: Reduce Orangepi PC RAM speed to 624 MHz
There are some reports of stability issues at 672 MHz, see:
http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit

So reduce the DRAM speed to 624MHz which seems to be reliable everywhere.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-12-27 12:30:39 +01:00
Tom Rini
40253dd12a Merge git://git.denx.de/u-boot-socfpga
Conflicts:
	include/configs/axs101.h

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-24 09:31:35 -05:00
Chin Liang See
0645c77315 arm: socfpga: sr1500: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI
and UBIFS support on serial NOR flash

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
2015-12-22 21:29:59 +01:00
Chin Liang See
aa2ba82925 arm: socfpga: arria5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI
and UBIFS support on serial NOR flash

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
2015-12-22 21:29:47 +01:00
Chin Liang See
6a6e6cf869 arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI
and UBIFS support on serial NOR flash

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
2015-12-22 21:29:29 +01:00
Masahiro Yamada
e90b368628 ARM: uniphier: rename rest of defconfig files
Rename rest of defconfig files of UniPhier SoC family to have the
prefix uniphier_.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:58 +09:00
Masahiro Yamada
1a2645341a ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig
These boards are similar enough to be supported in a single defconfig
file.  Distinguish one from another by "DEVICE_TREE" from the command
line.  The how-to-build in doc/README.uniphier should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:57 +09:00
Masahiro Yamada
5fd3f4346e ARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig
These two are similar enough to be merged into a single
defconfig file.  Distinguish one from another by "DEVICE_TREE"
from the command line.  The how-to-build in doc/README.uniphier
should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:57 +09:00
Marek Vasut
574967c241 arm: socfpga: Enable simple bus in SPL on all boards
The simple bus support must be enabled in SPL, otherwise the boards
will not be able to parse the DT and will fail to boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-12-22 04:42:28 +01:00
Tom Rini
5a4672bb4f Merge git://git.denx.de/u-boot-arc 2015-12-21 18:25:10 -05:00
Alexey Brodkin
d0602bd467 axs103: add support of generic OHCI USB 1.1 controller
This commit adds support of USB 1.1 storage media on AXS103 board.
For some yet unknown reason USB 2.0 doesn't work on AXS103 board issuing
messages like this:
------------------------>8-------------------
AXS# usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1)
1 USB Device(s) found
------------------------>8-------------------

As a work-around we're falling back to USB 1.1.
Indeed it is much slower but at least USB storage devices are usable on
AXS103.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2015-12-21 23:29:04 +03:00
Aleksei Mamlin
edf5dd835e sunxi: Add CONFIG_SUNXI_NO_PMIC to Marsboard A10 config
Marsboard A10 haven't any PMIC at all, so add CONFIG_SUNXI_NO_PMIC=y to
Marsboard_A10_defconfig

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-21 20:40:25 +01:00
Karsten Merker
2ec62022ed sunxi: A20-Olimex-SOM-EVB defconfig: enable mmc3
The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module. The baseboard provides a full-size SD
socket (connected to mmc3) in addition to the micro-SD socket on
the SOM itself (which is connected to mmc0).

Enable the mmc3 controller in the board defconfig.

Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-12-21 20:37:51 +01:00
Hans de Goede
a1ecb4b700 sun5i: Add defconfig and dts file for the Empire Electronix D709 tablet
The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.

Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.

The PCB has no markings to speak of.

This dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-12-21 20:37:15 +01:00
Tom Rini
34059d8f50 Merge branch 'master' of git://www.denx.de/git/u-boot-socfpga 2015-12-19 22:05:31 -05:00
Marek Vasut
b5a5d2bd96 arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data
This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-12-20 03:36:51 +01:00
Marek Vasut
225217da28 arm: socfpga: sockit: Probe DWC2 UDC from OF instead of hard-coded data
This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-12-20 03:36:51 +01:00
Marek Vasut
9368aa6a68 arm: socfpga: mcvevk: Probe DWC2 UDC from OF instead of hard-coded data
This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-12-20 03:36:51 +01:00
Marek Vasut
5b5226a8e6 arm: socfpga: de0_nano: Probe DWC2 UDC from OF instead of hard-coded data
This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-12-20 03:36:50 +01:00
Marek Vasut
c90ada94fb arm: socfpga: cyclone5-socdk: Probe DWC2 UDC from OF instead of hard-coded data
This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-12-20 03:36:50 +01:00
Marek Vasut
70311e69fa arm: socfpga: arria5-socdk: Probe DWC2 UDC from OF instead of hard-coded data
This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2015-12-20 03:36:50 +01:00
Marek Vasut
455e8fde4d nios2: Enable support for fitImage
The uImage format is legacy for years now, enable support for the
fitImage format, which allows combining multiple files (kernel and
dtb) into a single file, offers better protection of the payload
and so on.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-12-19 09:48:14 +08:00
Michal Simek
4280f50238 microblaze: Enable DM by default
Enable DM for the whole architecture.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-18 13:15:58 +01:00