mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
arm: imx: Add support for GE Bx50v3 boards
Add support for GE B450v3, B650v3 and B850v3 boards. The boards are based on Advantech BA16 module which has a i.MX6D processor. The boards support: - FEC Ethernet - USB Ports - SDHC and MMC boot - SPI NOR - LVDS and HDMI display Basic information about the module: - Module manufacturer: Advantech - CPU: Freescale ARM Cortex-A9 i.MX6D - SPECS: Up to 2GB Onboard DDR3 Memory; Up to 16GB Onboard eMMC NAND Flash Supports OpenGL ES 2.0 and OpenVG 1.1 HDMI, 24-bit LVDS 1x UART, 2x I2C, 8x GPIO, 4x Host USB 2.0 port, 1x USB OTG port, 1x micro SD (SDHC),1x SDIO, 1x SATA II, 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
parent
deff6fb3a7
commit
f9162b15c1
10 changed files with 1104 additions and 0 deletions
|
@ -60,6 +60,18 @@ config TARGET_CM_FX6
|
|||
config TARGET_EMBESTMX6BOARDS
|
||||
bool "embestmx6boards"
|
||||
|
||||
config TARGET_GE_B450V3
|
||||
bool "General Electric B450v3"
|
||||
select MX6Q
|
||||
|
||||
config TARGET_GE_B650V3
|
||||
bool "General Electric B650v3"
|
||||
select MX6Q
|
||||
|
||||
config TARGET_GE_B850V3
|
||||
bool "General Electric B850v3"
|
||||
select MX6Q
|
||||
|
||||
config TARGET_GW_VENTANA
|
||||
bool "gw_ventana"
|
||||
select SUPPORT_SPL
|
||||
|
@ -158,6 +170,7 @@ endchoice
|
|||
config SYS_SOC
|
||||
default "mx6"
|
||||
|
||||
source "board/ge/bx50v3/Kconfig"
|
||||
source "board/aristainetos/Kconfig"
|
||||
source "board/bachmann/ot1200/Kconfig"
|
||||
source "board/barco/platinum/Kconfig"
|
||||
|
|
18
board/ge/bx50v3/Kconfig
Normal file
18
board/ge/bx50v3/Kconfig
Normal file
|
@ -0,0 +1,18 @@
|
|||
if TARGET_GE_B450V3 || TARGET_GE_B650V3 || TARGET_GE_B850V3
|
||||
|
||||
config IMX_CONFIG
|
||||
default "board/ge/bx50v3/bx50v3.cfg"
|
||||
|
||||
config SYS_BOARD
|
||||
default "bx50v3"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "ge"
|
||||
|
||||
config SYS_SOC
|
||||
default "mx6"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "ge_bx50v3"
|
||||
|
||||
endif
|
8
board/ge/bx50v3/MAINTAINERS
Normal file
8
board/ge/bx50v3/MAINTAINERS
Normal file
|
@ -0,0 +1,8 @@
|
|||
GE_BX50V3 BOARD
|
||||
M: Martin Donnelly <martin.donnelly@ge.com>
|
||||
S: Maintained
|
||||
F: board/ge/bx50v3/
|
||||
F: include/configs/ge_bx50v3.h
|
||||
F: configs/ge_b450v3_defconfig
|
||||
F: configs/ge_b650v3_defconfig
|
||||
F: configs/ge_b850v3_defconfig
|
8
board/ge/bx50v3/Makefile
Normal file
8
board/ge/bx50v3/Makefile
Normal file
|
@ -0,0 +1,8 @@
|
|||
#
|
||||
# Copyright 2015 Timesys Corporation
|
||||
# Copyright 2015 General Electric Company
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := bx50v3.o
|
533
board/ge/bx50v3/bx50v3.c
Normal file
533
board/ge/bx50v3/bx50v3.c
Normal file
|
@ -0,0 +1,533 @@
|
|||
/*
|
||||
* Copyright 2015 Timesys Corporation
|
||||
* Copyright 2015 General Electric Company
|
||||
* Copyright 2012 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/arch/mx6-pins.h>
|
||||
#include <asm/errno.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/imx-common/mxc_i2c.h>
|
||||
#include <asm/imx-common/iomux-v3.h>
|
||||
#include <asm/imx-common/boot_mode.h>
|
||||
#include <asm/imx-common/video.h>
|
||||
#include <mmc.h>
|
||||
#include <fsl_esdhc.h>
|
||||
#include <miiphy.h>
|
||||
#include <netdev.h>
|
||||
#include <asm/arch/mxc_hdmi.h>
|
||||
#include <asm/arch/crm_regs.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <i2c.h>
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
||||
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||
|
||||
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
||||
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
||||
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||
|
||||
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
|
||||
PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST)
|
||||
|
||||
#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \
|
||||
PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST)
|
||||
|
||||
#define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
||||
PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST)
|
||||
|
||||
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
||||
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
||||
|
||||
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
||||
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
||||
|
||||
#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static iomux_v3_cfg_t const uart3_pads[] = {
|
||||
MX6_PAD_EIM_D31__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const uart4_pads[] = {
|
||||
MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const enet_pads[] = {
|
||||
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
|
||||
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
|
||||
/* AR8033 PHY Reset */
|
||||
MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
};
|
||||
|
||||
static void setup_iomux_enet(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
||||
|
||||
/* Reset AR8033 PHY */
|
||||
gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
|
||||
udelay(500);
|
||||
gpio_set_value(IMX_GPIO_NR(1, 28), 1);
|
||||
}
|
||||
|
||||
static iomux_v3_cfg_t const usdhc2_pads[] = {
|
||||
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const usdhc3_pads[] = {
|
||||
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const usdhc4_pads[] = {
|
||||
MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||
MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
};
|
||||
|
||||
static iomux_v3_cfg_t const ecspi1_pads[] = {
|
||||
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
||||
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
||||
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
||||
MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
};
|
||||
|
||||
static struct i2c_pads_info i2c_pad_info1 = {
|
||||
.scl = {
|
||||
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD,
|
||||
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | I2C_PAD,
|
||||
.gp = IMX_GPIO_NR(5, 27)
|
||||
},
|
||||
.sda = {
|
||||
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | I2C_PAD,
|
||||
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | I2C_PAD,
|
||||
.gp = IMX_GPIO_NR(5, 26)
|
||||
}
|
||||
};
|
||||
|
||||
static struct i2c_pads_info i2c_pad_info2 = {
|
||||
.scl = {
|
||||
.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
|
||||
.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
|
||||
.gp = IMX_GPIO_NR(4, 12)
|
||||
},
|
||||
.sda = {
|
||||
.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
|
||||
.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
|
||||
.gp = IMX_GPIO_NR(4, 13)
|
||||
}
|
||||
};
|
||||
|
||||
static struct i2c_pads_info i2c_pad_info3 = {
|
||||
.scl = {
|
||||
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | I2C_PAD,
|
||||
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | I2C_PAD,
|
||||
.gp = IMX_GPIO_NR(1, 3)
|
||||
},
|
||||
.sda = {
|
||||
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | I2C_PAD,
|
||||
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | I2C_PAD,
|
||||
.gp = IMX_GPIO_NR(1, 6)
|
||||
}
|
||||
};
|
||||
|
||||
#ifdef CONFIG_MXC_SPI
|
||||
int board_spi_cs_gpio(unsigned bus, unsigned cs)
|
||||
{
|
||||
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1;
|
||||
}
|
||||
|
||||
static void setup_spi(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
|
||||
}
|
||||
#endif
|
||||
|
||||
static iomux_v3_cfg_t const pcie_pads[] = {
|
||||
MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
};
|
||||
|
||||
static void setup_pcie(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
|
||||
}
|
||||
|
||||
static void setup_iomux_uart(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
|
||||
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_ESDHC
|
||||
struct fsl_esdhc_cfg usdhc_cfg[3] = {
|
||||
{USDHC2_BASE_ADDR},
|
||||
{USDHC3_BASE_ADDR},
|
||||
{USDHC4_BASE_ADDR},
|
||||
};
|
||||
|
||||
#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
|
||||
#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 11)
|
||||
|
||||
int board_mmc_getcd(struct mmc *mmc)
|
||||
{
|
||||
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
||||
int ret = 0;
|
||||
|
||||
switch (cfg->esdhc_base) {
|
||||
case USDHC2_BASE_ADDR:
|
||||
ret = !gpio_get_value(USDHC2_CD_GPIO);
|
||||
break;
|
||||
case USDHC3_BASE_ADDR:
|
||||
ret = 1; /* eMMC is always present */
|
||||
break;
|
||||
case USDHC4_BASE_ADDR:
|
||||
ret = !gpio_get_value(USDHC4_CD_GPIO);
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
|
||||
switch (i) {
|
||||
case 0:
|
||||
imx_iomux_v3_setup_multiple_pads(
|
||||
usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
|
||||
gpio_direction_input(USDHC2_CD_GPIO);
|
||||
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
||||
break;
|
||||
case 1:
|
||||
imx_iomux_v3_setup_multiple_pads(
|
||||
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
|
||||
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
||||
break;
|
||||
case 2:
|
||||
imx_iomux_v3_setup_multiple_pads(
|
||||
usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
|
||||
gpio_direction_input(USDHC4_CD_GPIO);
|
||||
usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
|
||||
break;
|
||||
default:
|
||||
printf("Warning: you configured more USDHC controllers\n"
|
||||
"(%d) then supported by the board (%d)\n",
|
||||
i + 1, CONFIG_SYS_FSL_USDHC_NUM);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int mx6_rgmii_rework(struct phy_device *phydev)
|
||||
{
|
||||
/* Configure AR8033 to ouput a 125MHz clk from CLK_25M */
|
||||
/* set device address 0x7 */
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
|
||||
/* offset 0x8016: CLK_25M Clock Select */
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
|
||||
/* enable register write, no post increment, address 0x7 */
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
|
||||
/* set to 125 MHz from local PLL source */
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x18);
|
||||
|
||||
/* rgmii tx clock delay enable */
|
||||
/* set debug port address: SerDes Test and System Mode Control */
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
|
||||
/* enable rgmii tx clock delay */
|
||||
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
mx6_rgmii_rework(phydev);
|
||||
|
||||
if (phydev->drv->config)
|
||||
phydev->drv->config(phydev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_VIDEO_IPUV3)
|
||||
static iomux_v3_cfg_t const backlight_pads[] = {
|
||||
/* Power for LVDS Display */
|
||||
MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
#define LVDS_POWER_GP IMX_GPIO_NR(3, 22)
|
||||
/* Backlight enable for LVDS display */
|
||||
MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 0)
|
||||
};
|
||||
|
||||
static void do_enable_hdmi(struct display_info_t const *dev)
|
||||
{
|
||||
imx_enable_hdmi_phy();
|
||||
}
|
||||
|
||||
int board_cfb_skip(void)
|
||||
{
|
||||
gpio_direction_output(LVDS_POWER_GP, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int detect_baseboard(struct display_info_t const *dev)
|
||||
{
|
||||
if (IS_ENABLED(CONFIG_TARGET_GE_B450V3) ||
|
||||
IS_ENABLED(CONFIG_TARGET_GE_B650V3))
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct display_info_t const displays[] = {{
|
||||
.bus = -1,
|
||||
.addr = -1,
|
||||
.pixfmt = IPU_PIX_FMT_RGB24,
|
||||
.detect = detect_baseboard,
|
||||
.enable = NULL,
|
||||
.mode = {
|
||||
.name = "G121X1-L03",
|
||||
.refresh = 60,
|
||||
.xres = 1024,
|
||||
.yres = 768,
|
||||
.pixclock = 15385,
|
||||
.left_margin = 20,
|
||||
.right_margin = 300,
|
||||
.upper_margin = 30,
|
||||
.lower_margin = 8,
|
||||
.hsync_len = 1,
|
||||
.vsync_len = 1,
|
||||
.sync = FB_SYNC_EXT,
|
||||
.vmode = FB_VMODE_NONINTERLACED
|
||||
} }, {
|
||||
.bus = -1,
|
||||
.addr = 3,
|
||||
.pixfmt = IPU_PIX_FMT_RGB24,
|
||||
.detect = detect_hdmi,
|
||||
.enable = do_enable_hdmi,
|
||||
.mode = {
|
||||
.name = "HDMI",
|
||||
.refresh = 60,
|
||||
.xres = 1024,
|
||||
.yres = 768,
|
||||
.pixclock = 15385,
|
||||
.left_margin = 220,
|
||||
.right_margin = 40,
|
||||
.upper_margin = 21,
|
||||
.lower_margin = 7,
|
||||
.hsync_len = 60,
|
||||
.vsync_len = 10,
|
||||
.sync = FB_SYNC_EXT,
|
||||
.vmode = FB_VMODE_NONINTERLACED
|
||||
} } };
|
||||
size_t display_count = ARRAY_SIZE(displays);
|
||||
|
||||
static void setup_display(void)
|
||||
{
|
||||
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
||||
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
||||
int reg;
|
||||
|
||||
enable_ipu_clock();
|
||||
imx_setup_hdmi();
|
||||
|
||||
reg = readl(&mxc_ccm->CCGR3);
|
||||
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
|
||||
writel(reg, &mxc_ccm->CCGR3);
|
||||
|
||||
reg = readl(&mxc_ccm->cs2cdr);
|
||||
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
|
||||
MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
||||
reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
|
||||
(3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
||||
writel(reg, &mxc_ccm->cs2cdr);
|
||||
|
||||
reg = readl(&mxc_ccm->cscmr2);
|
||||
reg |= (MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
|
||||
writel(reg, &mxc_ccm->cscmr2);
|
||||
|
||||
reg = readl(&mxc_ccm->chsccdr);
|
||||
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
||||
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
||||
writel(reg, &mxc_ccm->chsccdr);
|
||||
|
||||
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|
||||
| IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|
||||
| IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|
||||
| IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|
||||
| IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT
|
||||
| IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|
||||
| IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
|
||||
| IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0
|
||||
| IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
|
||||
writel(reg, &iomux->gpr[2]);
|
||||
|
||||
reg = readl(&iomux->gpr[3]);
|
||||
reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
|
||||
IOMUXC_GPR3_LVDS1_MUX_CTL_MASK |
|
||||
IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
|
||||
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
||||
<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET)
|
||||
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
||||
<< IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET);
|
||||
writel(reg, &iomux->gpr[3]);
|
||||
|
||||
/* backlights off until needed */
|
||||
imx_iomux_v3_setup_multiple_pads(backlight_pads,
|
||||
ARRAY_SIZE(backlight_pads));
|
||||
gpio_direction_input(LVDS_POWER_GP);
|
||||
gpio_direction_input(LVDS_BACKLIGHT_GP);
|
||||
}
|
||||
#endif /* CONFIG_VIDEO_IPUV3 */
|
||||
|
||||
/*
|
||||
* Do not overwrite the console
|
||||
* Use always serial for U-Boot console
|
||||
*/
|
||||
int overwrite_console(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
setup_iomux_enet();
|
||||
setup_pcie();
|
||||
|
||||
return cpu_eth_init(bis);
|
||||
}
|
||||
|
||||
static iomux_v3_cfg_t const misc_pads[] = {
|
||||
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||
};
|
||||
#define SUS_S3_OUT IMX_GPIO_NR(4, 11)
|
||||
#define WIFI_EN IMX_GPIO_NR(6, 14)
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
imx_iomux_v3_setup_multiple_pads(misc_pads,
|
||||
ARRAY_SIZE(misc_pads));
|
||||
|
||||
setup_iomux_uart();
|
||||
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
gpio_direction_output(SUS_S3_OUT, 1);
|
||||
gpio_direction_output(WIFI_EN, 1);
|
||||
#if defined(CONFIG_VIDEO_IPUV3)
|
||||
setup_display();
|
||||
#endif
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||
|
||||
#ifdef CONFIG_MXC_SPI
|
||||
setup_spi();
|
||||
#endif
|
||||
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
|
||||
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
|
||||
setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_CMD_BMODE
|
||||
static const struct boot_mode board_boot_modes[] = {
|
||||
/* 4 bit bus width */
|
||||
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
|
||||
{"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
|
||||
{NULL, 0},
|
||||
};
|
||||
#endif
|
||||
|
||||
int board_late_init(void)
|
||||
{
|
||||
#ifdef CONFIG_CMD_BMODE
|
||||
add_board_boot_modes(board_boot_modes);
|
||||
#endif
|
||||
/* We need at least 200ms between power on and backlight on
|
||||
* as per specifications from CHI MEI */
|
||||
mdelay(250);
|
||||
|
||||
/* Backlight Power */
|
||||
gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
printf("BOARD: %s\n", CONFIG_BOARD_NAME);
|
||||
return 0;
|
||||
}
|
151
board/ge/bx50v3/bx50v3.cfg
Normal file
151
board/ge/bx50v3/bx50v3.cfg
Normal file
|
@ -0,0 +1,151 @@
|
|||
/*
|
||||
*
|
||||
* Copyright 2015 Timesys Corporation.
|
||||
* Copyright 2015 General Electric Company
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*
|
||||
* Refer doc/README.imximage for more details about how-to configure
|
||||
* and create imximage boot image
|
||||
*
|
||||
* The syntax is taken as close as possible with the kwbimage
|
||||
*/
|
||||
|
||||
IMAGE_VERSION 2
|
||||
BOOT_FROM sd
|
||||
|
||||
#define __ASSEMBLY__
|
||||
#include <config.h>
|
||||
#include "asm/arch/mx6-ddr.h"
|
||||
#include "asm/arch/iomux.h"
|
||||
#include "asm/arch/crm_regs.h"
|
||||
|
||||
/* DDR IO */
|
||||
DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000c0000
|
||||
DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
|
||||
DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_CAS, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_RAS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_RESET, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
|
||||
DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
|
||||
DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
|
||||
DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
|
||||
DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
|
||||
DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM4, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM5, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM6, 0x00000030
|
||||
DATA 4, MX6_IOM_DRAM_DQM7, 0x00000030
|
||||
|
||||
/* Calibrations */
|
||||
/* ZQ */
|
||||
DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
|
||||
/* write leveling */
|
||||
DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F
|
||||
DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
|
||||
DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F
|
||||
DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
|
||||
/* Read DQS Gating calibration */
|
||||
DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x45380544
|
||||
DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x05280530
|
||||
DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4530053C
|
||||
DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0530050C
|
||||
/* Read calibration */
|
||||
DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x36303032
|
||||
DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x38363042
|
||||
/* Write calibration */
|
||||
DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3A3A423E
|
||||
DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4A38483E
|
||||
/* read data bit delay */
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
|
||||
DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
|
||||
|
||||
/* Complete calibration by forced measurment */
|
||||
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
|
||||
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
|
||||
|
||||
/* MMDC init */
|
||||
DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
|
||||
DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
|
||||
DATA 4, MX6_MMDC_P0_MDCFG0, 0x8A8F79A4
|
||||
DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538E64
|
||||
DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db
|
||||
DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
|
||||
DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2
|
||||
DATA 4, MX6_MMDC_P0_MDOR, 0x008F1023
|
||||
DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
|
||||
DATA 4, MX6_MMDC_P0_MDCTL, 0x841a0000
|
||||
|
||||
/* Initialize Micron MT41J128M */
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x0408803a
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803b
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00408031
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00408039
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x09408038
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048
|
||||
DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
|
||||
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00011117
|
||||
DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00011117
|
||||
DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
|
||||
DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
|
||||
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
|
||||
|
||||
/* set the default clock gate to save power */
|
||||
DATA 4, CCM_CCGR0, 0x00C03F3F
|
||||
DATA 4, CCM_CCGR1, 0x0030FC03
|
||||
DATA 4, CCM_CCGR2, 0x0FFFC000
|
||||
DATA 4, CCM_CCGR3, 0x3FF00000
|
||||
DATA 4, CCM_CCGR4, 0x00FFF300
|
||||
DATA 4, CCM_CCGR5, 0x0F0000C3
|
||||
DATA 4, CCM_CCGR6, 0x000003FF
|
||||
|
||||
/* enable AXI cache for VDOA/VPU/IPU */
|
||||
DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
|
||||
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
|
||||
DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
|
||||
DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
|
||||
|
||||
/*
|
||||
* Setup CCM_CCOSR register as follows:
|
||||
*
|
||||
* cko1_en 1 --> CKO1 enabled
|
||||
* cko1_div 111 --> divide by 8
|
||||
* cko1_sel 1011 --> ahb_clk_root
|
||||
*
|
||||
* This sets CKO1 at ahb_clk_root/8 132/8 16.5 MHz
|
||||
*/
|
||||
DATA 4, CCM_CCOSR, 0x000000fb
|
8
configs/ge_b450v3_defconfig
Normal file
8
configs/ge_b450v3_defconfig
Normal file
|
@ -0,0 +1,8 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_GE_B450V3=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
8
configs/ge_b650v3_defconfig
Normal file
8
configs/ge_b650v3_defconfig
Normal file
|
@ -0,0 +1,8 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_GE_B650V3=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
8
configs/ge_b850v3_defconfig
Normal file
8
configs/ge_b850v3_defconfig
Normal file
|
@ -0,0 +1,8 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_TARGET_GE_B850V3=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
349
include/configs/ge_bx50v3.h
Normal file
349
include/configs/ge_bx50v3.h
Normal file
|
@ -0,0 +1,349 @@
|
|||
/*
|
||||
* Copyright (C) 2015 Timesys Corporation
|
||||
* Copyright (C) 2015 General Electric Company
|
||||
* Copyright (C) 2014 Advantech
|
||||
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Configuration settings for the GE MX6Q Bx50v3 boards.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __GE_BX50V3_CONFIG_H
|
||||
#define __GE_BX50V3_CONFIG_H
|
||||
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/imx-common/gpio.h>
|
||||
|
||||
#if defined(CONFIG_TARGET_GE_B450V3)
|
||||
#define CONFIG_BOARD_NAME "General Electric B450v3"
|
||||
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
|
||||
#elif defined(CONFIG_TARGET_GE_B650V3)
|
||||
#define CONFIG_BOARD_NAME "General Electric B650v3"
|
||||
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b650v3.dtb"
|
||||
#elif defined(CONFIG_TARGET_GE_B850V3)
|
||||
#define CONFIG_BOARD_NAME "General Electric B850v3"
|
||||
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
|
||||
#else
|
||||
#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
|
||||
#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
|
||||
#endif
|
||||
|
||||
#define CONFIG_MXC_UART_BASE UART3_BASE
|
||||
#define CONFIG_CONSOLE_DEV "ttymxc2"
|
||||
|
||||
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
|
||||
|
||||
#define CONFIG_SUPPORT_EMMC_BOOT
|
||||
|
||||
#define CONFIG_BOOTDELAY 1
|
||||
|
||||
#include "mx6_common.h"
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
|
||||
#define CONFIG_MXC_GPIO
|
||||
#define CONFIG_MXC_UART
|
||||
|
||||
#define CONFIG_CMD_FUSE
|
||||
#define CONFIG_MXC_OCOTP
|
||||
|
||||
/* SATA Configs */
|
||||
#define CONFIG_CMD_SATA
|
||||
#define CONFIG_DWC_AHSATA
|
||||
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
||||
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
||||
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
||||
#define CONFIG_LBA48
|
||||
#define CONFIG_LIBATA
|
||||
|
||||
/* MMC Configs */
|
||||
#define CONFIG_FSL_ESDHC
|
||||
#define CONFIG_FSL_USDHC
|
||||
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_BOUNCE_BUFFER
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/* USB Configs */
|
||||
#define CONFIG_CMD_USB
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_MX6
|
||||
#define CONFIG_USB_STORAGE
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||
#define CONFIG_MXC_USB_FLAGS 0
|
||||
#define CONFIG_USB_KEYBOARD
|
||||
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
|
||||
|
||||
#define CONFIG_CI_UDC
|
||||
#define CONFIG_USBD_HS
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_MASS_STORAGE
|
||||
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
|
||||
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
|
||||
#define CONFIG_G_DNL_MANUFACTURER "Advantech"
|
||||
|
||||
/* Networking Configs */
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_FEC_MXC
|
||||
#define CONFIG_MII
|
||||
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||
#define CONFIG_FEC_XCV_TYPE RGMII
|
||||
#define CONFIG_ETHPRIME "FEC"
|
||||
#define CONFIG_FEC_MXC_PHYADDR 4
|
||||
#define CONFIG_PHYLIB
|
||||
#define CONFIG_PHY_ATHEROS
|
||||
|
||||
/* Serial Flash */
|
||||
#define CONFIG_CMD_SF
|
||||
#ifdef CONFIG_CMD_SF
|
||||
#define CONFIG_MXC_SPI
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 20000000
|
||||
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||||
#endif
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
/* Command definition */
|
||||
#define CONFIG_CMD_BMODE
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#undef CONFIG_CMD_IMLS
|
||||
|
||||
#define CONFIG_LOADADDR 0x12000000
|
||||
#define CONFIG_SYS_TEXT_BASE 0x17800000
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"script=boot.scr\0" \
|
||||
"image=/boot/uImage\0" \
|
||||
"uboot=u-boot.imx\0" \
|
||||
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
||||
"fdt_addr=0x18000000\0" \
|
||||
"boot_fdt=yes\0" \
|
||||
"ip_dyn=yes\0" \
|
||||
"console=" CONFIG_CONSOLE_DEV "\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"sddev=0\0" \
|
||||
"emmcdev=1\0" \
|
||||
"partnum=1\0" \
|
||||
"update_sd_firmware=" \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"if mmc dev ${mmcdev}; then " \
|
||||
"if ${get_cmd} ${update_sd_firmware_filename}; then " \
|
||||
"setexpr fw_sz ${filesize} / 0x200; " \
|
||||
"setexpr fw_sz ${fw_sz} + 1; " \
|
||||
"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
|
||||
"fi; " \
|
||||
"fi\0" \
|
||||
"update_sf_uboot=" \
|
||||
"if tftp $loadaddr $uboot; then " \
|
||||
"sf probe; " \
|
||||
"sf erase 0 0xC0000; " \
|
||||
"sf write $loadaddr 0x400 $filesize; " \
|
||||
"echo 'U-Boot upgraded. Please reset'; " \
|
||||
"fi\0" \
|
||||
"setargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/${rootdev} rw rootwait cma=128M\0" \
|
||||
"loadbootscript=" \
|
||||
"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
|
||||
"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
|
||||
" source\0" \
|
||||
"loadimage=" \
|
||||
"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
|
||||
"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
|
||||
"tryboot=" \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loadimage; then " \
|
||||
"run doboot; " \
|
||||
"fi; " \
|
||||
"fi;\0" \
|
||||
"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
|
||||
"run setargs; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if run loadfdt; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi;\0" \
|
||||
"netargs=setenv bootargs console=${console},${baudrate} " \
|
||||
"root=/dev/nfs " \
|
||||
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
||||
"netboot=echo Booting from net ...; " \
|
||||
"run netargs; " \
|
||||
"if test ${ip_dyn} = yes; then " \
|
||||
"setenv get_cmd dhcp; " \
|
||||
"else " \
|
||||
"setenv get_cmd tftp; " \
|
||||
"fi; " \
|
||||
"${get_cmd} ${image}; " \
|
||||
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
||||
"bootm ${loadaddr} - ${fdt_addr}; " \
|
||||
"else " \
|
||||
"if test ${boot_fdt} = try; then " \
|
||||
"bootm; " \
|
||||
"else " \
|
||||
"echo WARN: Cannot load the DT; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else " \
|
||||
"bootm; " \
|
||||
"fi;\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"usb start; " \
|
||||
"setenv dev usb; " \
|
||||
"setenv devnum 0; " \
|
||||
"setenv rootdev sda1; " \
|
||||
"run tryboot; " \
|
||||
\
|
||||
"setenv dev mmc; " \
|
||||
"setenv rootdev mmcblk0p1; " \
|
||||
\
|
||||
"setenv devnum ${sddev}; " \
|
||||
"if mmc dev ${devnum}; then " \
|
||||
"run tryboot; " \
|
||||
"setenv rootdev mmcblk1p1; " \
|
||||
"fi; " \
|
||||
\
|
||||
"setenv devnum ${emmcdev}; " \
|
||||
"if mmc dev ${devnum}; then " \
|
||||
"run tryboot; " \
|
||||
"fi; " \
|
||||
\
|
||||
"bmode usb; " \
|
||||
|
||||
#define CONFIG_ARP_TIMEOUT 200UL
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x10010000
|
||||
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_STACKSIZE (128 * 1024)
|
||||
|
||||
/* Physical Memory Map */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||
|
||||
/* FLASH and environment organization */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#define CONFIG_ENV_SIZE (8 * 1024)
|
||||
#define CONFIG_ENV_OFFSET (768 * 1024)
|
||||
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
#ifndef CONFIG_SYS_DCACHE_OFF
|
||||
#define CONFIG_CMD_CACHE
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
||||
|
||||
/* Framebuffer */
|
||||
#define CONFIG_VIDEO
|
||||
#define CONFIG_VIDEO_IPUV3
|
||||
#define CONFIG_CFB_CONSOLE
|
||||
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
||||
#define CONFIG_VIDEO_BMP_RLE8
|
||||
#define CONFIG_SPLASH_SCREEN
|
||||
#define CONFIG_SPLASH_SCREEN_ALIGN
|
||||
#define CONFIG_BMP_16BPP
|
||||
#define CONFIG_VIDEO_LOGO
|
||||
#define CONFIG_VIDEO_BMP_LOGO
|
||||
#define CONFIG_IPUV3_CLK 260000000
|
||||
#define CONFIG_IMX_HDMI
|
||||
#define CONFIG_IMX_VIDEO_SKIP
|
||||
|
||||
#undef CONFIG_CMD_PCI
|
||||
#ifdef CONFIG_CMD_PCI
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_PCI_PNP
|
||||
#define CONFIG_PCI_SCAN_SHOW
|
||||
#define CONFIG_PCIE_IMX
|
||||
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
|
||||
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
|
||||
#endif
|
||||
|
||||
/* I2C Configs */
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_MXC
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_MXC_I2C1
|
||||
#define CONFIG_SYS_I2C_MXC_I2C2
|
||||
#define CONFIG_SYS_I2C_MXC_I2C3
|
||||
|
||||
#endif /* __GE_BX50V3_CONFIG_H */
|
Loading…
Reference in a new issue