Phaser. Circle

new Circle(x, y, diameter)

Creates a new Circle object with the center coordinate specified by the x and y parameters and the diameter specified by the diameter parameter. If you call this function without parameters, a circle with x, y, diameter and radius properties set to 0 is created.

Parameters:
Name Type Argument Default Description
x number <optional>
0

The x coordinate of the center of the circle.

y number <optional>
0

The y coordinate of the center of the circle.

diameter number <optional>
0

The diameter of the circle.

Source - geom/Circle.js, line 17

Members

<readonly> area :number

The area of this Circle.

Source - geom/Circle.js, line 378

bottom :number

The sum of the y and radius properties. Changing the bottom property of a Circle object has no effect on the x and y properties, but does change the diameter. Gets or sets the bottom of the circle.

Source - geom/Circle.js, line 351

diameter :number

The largest distance between any two points on the circle. The same as the radius * 2. Gets or sets the diameter of the circle.

Source - geom/Circle.js, line 225

empty :boolean

Determines whether or not this Circle object is empty. Will return a value of true if the Circle objects diameter is less than or equal to 0; otherwise false. If set to true it will reset all of the Circle objects properties to 0. A Circle object is empty if its diameter is less than or equal to 0. Gets or sets the empty state of the circle.

Source - geom/Circle.js, line 401

left

The x coordinate of the leftmost point of the circle. Changing the left property of a Circle object has no effect on the x and y properties. However it does affect the diameter, whereas changing the x value does not affect the diameter property.

Source - geom/Circle.js, line 270

radius :number

The length of a line extending from the center of the circle to any point on the circle itself. The same as half the diameter. Gets or sets the radius of the circle.

Source - geom/Circle.js, line 247

The x coordinate of the rightmost point of the circle. Changing the right property of a Circle object has no effect on the x and y properties. However it does affect the diameter, whereas changing the x value does not affect the diameter property. Gets or sets the value of the rightmost point of the circle.

Source - geom/Circle.js, line 297

top :number

The sum of the y minus the radius property. Changing the top property of a Circle object has no effect on the x and y properties, but does change the diameter. Gets or sets the top of the circle.

Source - geom/Circle.js, line 324

x :number

The x coordinate of the center of the circle.

Source - geom/Circle.js, line 26

y :number

The y coordinate of the center of the circle.

Source - geom/Circle.js, line 31

Methods

<static> circumferencePoint(a, angle, asDegrees, out) → {Phaser.Point}

Returns a Point object containing the coordinates of a point on the circumference of the Circle based on the given angle.

Parameters:
Name Type Argument Default Description
a Phaser.Circle

The first Circle object.

angle number

The angle in radians (unless asDegrees is true) to return the point from.

asDegrees boolean <optional>
false

Is the given angle in radians (false) or degrees (true)?

out Phaser.Point <optional>

An optional Point object to put the result in to. If none specified a new Point object will be created.

Returns:

The Point object holding the result.

Source - geom/Circle.js, line 472

<static> contains(a, x, y) → {boolean}

Return true if the given x/y coordinates are within the Circle object.

Parameters:
Name Type Description
a Phaser.Circle

The Circle to be checked.

x number

The X value of the coordinate to test.

y number

The Y value of the coordinate to test.

Returns:
boolean -

True if the coordinates are within this circle, otherwise false.

Source - geom/Circle.js, line 424

<static> equals(a, b) → {boolean}

Determines whether the two Circle objects match. This method compares the x, y and diameter properties.

Parameters:
Name Type Description
a Phaser.Circle

The first Circle object.

b Phaser.Circle

The second Circle object.

Returns:
boolean -

A value of true if the object has exactly the same values for the x, y and diameter properties as this Circle object; otherwise false.

Source - geom/Circle.js, line 449

<static> intersects(a, b) → {boolean}

Determines whether the two Circle objects intersect. This method checks the radius distances between the two Circle objects to see if they intersect.

Parameters:
Name Type Description
a Phaser.Circle

The first Circle object.

b Phaser.Circle

The second Circle object.

Returns:
boolean -

A value of true if the specified object intersects with this Circle object; otherwise false.

Source - geom/Circle.js, line 460

<static> intersectsRectangle(c, r) → {boolean}

Checks if the given Circle and Rectangle objects intersect.

Parameters:
Name Type Description
c Phaser.Circle

The Circle object to test.

r Phaser.Rectangle

The Rectangle object to test.

Returns:
boolean -

True if the two objects intersect, otherwise false.

Source - geom/Circle.js, line 498

circumference() → {number}

The circumference of the circle.

Returns:
number -
Source - geom/Circle.js, line 58

circumferencePoint(angle, asDegrees, out) → {Phaser.Point}

Returns a Point object containing the coordinates of a point on the circumference of the Circle based on the given angle.

Parameters:
Name Type Argument Default Description
angle number

The angle in radians (unless asDegrees is true) to return the point from.

asDegrees boolean <optional>
false

Is the given angle in radians (false) or degrees (true)?

out Phaser.Point <optional>

An optional Point object to put the result in to. If none specified a new Point object will be created.

Returns:

The Point object holding the result.

Source - geom/Circle.js, line 172

clone(output) → {Phaser.Circle}

Returns a new Circle object with the same values for the x, y, width, and height properties as this Circle object.

Parameters:
Name Type Description
output Phaser.Circle

Optional Circle object. If given the values will be set into the object, otherwise a brand new Circle object will be created and returned.

Returns:

The cloned Circle object.

Source - geom/Circle.js, line 138

contains(x, y) → {boolean}

Return true if the given x/y coordinates are within this Circle object.

Parameters:
Name Type Description
x number

The X value of the coordinate to test.

y number

The Y value of the coordinate to test.

Returns:
boolean -

True if the coordinates are within this circle, otherwise false.

Source - geom/Circle.js, line 159

copyFrom(source) → {Circle}

Copies the x, y and diameter properties from any given object to this Circle.

Parameters:
Name Type Description
source any

The object to copy from.

Returns:
Circle -

This Circle object.

Source - geom/Circle.js, line 95

copyTo(dest) → {object}

Copies the x, y and diameter properties from this Circle to any given object.

Parameters:
Name Type Description
dest any

The object to copy to.

Returns:
object -

This dest object.

Source - geom/Circle.js, line 107

distance(dest, round) → {number}

Returns the distance from the center of the Circle object to the given object (can be Circle, Point or anything with x/y properties)

Parameters:
Name Type Argument Default Description
dest object

The target object. Must have visible x and y properties that represent the center of the object.

round boolean <optional>
false

Round the distance to the nearest integer.

Returns:
number -

The distance between this Point object and the destination Point object.

Source - geom/Circle.js, line 123

getBounds() → {Phaser.Rectangle}

Returns the framing rectangle of the circle as a Phaser.Rectangle object

Returns:

The bounds of the Circle.

Source - geom/Circle.js, line 67

offset(dx, dy) → {Circle}

Adjusts the location of the Circle object, as determined by its center coordinate, by the specified amounts.

Parameters:
Name Type Description
dx number

Moves the x value of the Circle object by this amount.

dy number

Moves the y value of the Circle object by this amount.

Returns:
Circle -

This Circle object.

Source - geom/Circle.js, line 186

offsetPoint(point) → {Circle}

Adjusts the location of the Circle object using a Point object as a parameter. This method is similar to the Circle.offset() method, except that it takes a Point object as a parameter.

Parameters:
Name Type Description
point Point

A Point object to use to offset this Circle object (or any valid object with exposed x and y properties).

Returns:
Circle -

This Circle object.

Source - geom/Circle.js, line 202

setTo(x, y, diameter) → {Circle}

Sets the members of Circle to the specified values.

Parameters:
Name Type Description
x number

The x coordinate of the center of the circle.

y number

The y coordinate of the center of the circle.

diameter number

The diameter of the circle.

Returns:
Circle -

This circle object.

Source - geom/Circle.js, line 76

toString() → {string}

Returns a string representation of this object.

Returns:
string -

a string representation of the instance.

Source - geom/Circle.js, line 212
Phaser Copyright © 2012-2014 Photon Storm Ltd.
Documentation generated by JSDoc 3.3.0-dev on Thu Dec 04 2014 11:32:30 GMT-0000 (GMT) using the DocStrap template.