# Objective
- `AssetTransformer` provides an input asset, and output an asset, but
provides no access to the `LabeledAsset`'s created by the `AssetLoader`.
Labeled sub assets are an extremely important piece of many assets, Gltf
in particular, and without them the amount of transformation on an asset
is limited. In order for `AssetTransformer`'s to be useful, they need to
have access to these sub assets.
- LabeledAsset's loaded by `AssetLoader`s are provided to `AssetSaver`s
in the `LoadAndSave` process, but the `LoadTransformAndSave` process
drops these values in the transform stage, and so `AssetSaver` is given
none.
- Fixes#11606
Ideally the AssetTransformer should not ignore labeled sub assets, and
they should be kept at least for the AssetSaver
## Solution
- I created a new struct similar to `SavedAsset` named
`TransformedAsset` which holds the input asset, and the HashMap of
`LabeledAsset`s. The transform function now takes as input a
`TransformedAsset`, and returns a `TransformedAsset::<AssetOutput>`.
This gives the transform function access to the labeled sub assets
created by the `AssetLoader`.
- I also created `TransformedSubAsset` which holds mutable references to
a sub asset and that sub assets HashMap of `LabeledAsset`s. This allows
you to travers the Tree of `LabeledAsset`s by reference relatively
easily.
- The `LoadTransformAndSave` processor was then reworked to use the new
structs, stopping the `LabeledAsset`s from being dropped.
---
## Changelog
- Created TransformedAsset struct and TransformedSubAsset struct.
- Changed `get_untyped_handle` to return a `UntypedHandle` directly
rather than a reference and added `get_handle` as a typed variant in
SavedAsset and TransformedAsset
- Added `SavedAsset::from_transformed` as a constructor from a
`TransformedAsset`
- Switched LoadTransformAndSave process code to work with new
`TransformedAsset` type
- Added a `ProcessError` for `AssetTransformer` in process.rs
- Switched `AssetTransformer::transform` to use `TransformedAsset` as
input and output.
- Switched `AssetTransformer` to use a `BoxedFuture` like `AssetLoader`
and `AssetSaver` to allow for async transformation code.
- Updated AssetTransformer example to use new structure.
# Objective
It's often necessary to rotate directions, but it currently has to be
done like this:
```rust
Direction3d::new_unchecked(quat * *direction)
```
It'd be nice if you could rotate `Direction3d` directly:
```rust
quat * direction
```
## Solution
Implement `Mul<Direction3d>` for `Quat` ~~and the other way around.~~
(Glam doesn't impl `Mul<Quat>` or `MulAssign<Quat>` for `Vec3`)
The quaternion must be a unit quaternion to keep the direction
normalized, so there is a `debug_assert!` to be sure. Almost all `Quat`
constructors produce unit quaternions, so there should only be issues if
doing something like `quat + quat` instead of `quat * quat`, using
`Quat::from_xyzw` directly, or when you have significant enough drift
caused by e.g. physics simulation that doesn't normalize rotation. In
general, these would probably cause unexpected results anyway.
I also moved tests around slightly to make `dim2` and `dim3` more
consistent (`dim3` had *two* separate `test` modules for some reason).
In the future, we'll probably want a `Rotation2d` type that would
support the same for `Direction2d`. I considered implementing
`Mul<Mat2>` for `Direction2d`, but that would probably be more
questionable since `Mat2` isn't as clearly associated with rotations as
`Quat` is.
# Objective
I'm working on a developer console plugin, and I wanted to get a
field/index of a struct/list/tuple. My command parser already parses
member expressions and all that, so I wanted to construct a `ParsedPath`
manually, but it's all private.
## Solution
Make the internals of `ParsedPath` public and add documentation for
everything, and I changed the boxed slice inside `ParsedPath` to a
vector for more flexibility.
I also did a bunch of code cleanup. Improving documentation, error
messages, code, type names, etc.
---
## Changelog
- Added the ability to manually create `ParsedPath`s from their
elements, without the need of string parsing.
- Improved `ReflectPath` error handling.
## Migration Guide
- `bevy::reflect::AccessError` has been refactored.
That should be it I think, everything else that was changed was private
before this PR.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Deriving `Reflect` for some public ChangeDetection/Tick structs in
bevy_ecs
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
# Objective
- Add a basic form of shapecasting for bounding volumes
## Solution
- Implement AabbCast2d, AabbCast3d, BoundingCircleCast, and
BoundingSphereCast
- These are really just raycasts, but they modify the volumes the ray is
casting against
- The tests are slightly simpler, since they just use the raycast code
for the heavy lifting
# Objective
- Addresses **Support processing and loading files without extensions**
from #9714
- Addresses **More runtime loading configuration** from #9714
- Fixes#367
- Fixes#10703
## Solution
`AssetServer::load::<A>` and `AssetServer::load_with_settings::<A>` can
now use the `Asset` type parameter `A` to select a registered
`AssetLoader` without inspecting the provided `AssetPath`. This change
cascades onto `LoadContext::load` and `LoadContext::load_with_settings`.
This allows the loading of assets which have incorrect or ambiguous file
extensions.
```rust
// Allow the type to be inferred by context
let handle = asset_server.load("data/asset_no_extension");
// Hint the type through the handle
let handle: Handle<CustomAsset> = asset_server.load("data/asset_no_extension");
// Explicit through turbofish
let handle = asset_server.load::<CustomAsset>("data/asset_no_extension");
```
Since a single `AssetPath` no longer maps 1:1 with an `Asset`, I've also
modified how assets are loaded to permit multiple asset types to be
loaded from a single path. This allows for two different `AssetLoaders`
(which return different types of assets) to both load a single path (if
requested).
```rust
// Uses GltfLoader
let model = asset_server.load::<Gltf>("cube.gltf");
// Hypothetical Blob loader for data transmission (for example)
let blob = asset_server.load::<Blob>("cube.gltf");
```
As these changes are reflected in the `LoadContext` as well as the
`AssetServer`, custom `AssetLoaders` can also take advantage of this
behaviour to create more complex assets.
---
## Change Log
- Updated `custom_asset` example to demonstrate extension-less assets.
- Added `AssetServer::get_handles_untyped` and Added
`AssetServer::get_path_ids`
## Notes
As a part of that refactor, I chose to store `AssetLoader`s (within
`AssetLoaders`) using a `HashMap<TypeId, ...>` instead of a `Vec<...>`.
My reasoning for this was I needed to add a relationship between `Asset`
`TypeId`s and the `AssetLoader`, so instead of having a `Vec` and a
`HashMap`, I combined the two, removing the `usize` index from the
adjacent maps.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The whole `Cow<'static, str>` naming for nodes and subgraphs in
`RenderGraph` is a mess.
## Solution
Replaces hardcoded and potentially overlapping strings for nodes and
subgraphs inside `RenderGraph` with bevy's labelsystem.
---
## Changelog
* Two new labels: `RenderLabel` and `RenderSubGraph`.
* Replaced all uses for hardcoded strings with those labels
* Moved `Taa` label from its own mod to all the other `Labels3d`
* `add_render_graph_edges` now needs a tuple of labels
* Moved `ScreenSpaceAmbientOcclusion` label from its own mod with the
`ShadowPass` label to `LabelsPbr`
* Removed `NodeId`
* Renamed `Edges.id()` to `Edges.label()`
* Removed `NodeLabel`
* Changed examples according to the new label system
* Introduced new `RenderLabel`s: `Labels2d`, `Labels3d`, `LabelsPbr`,
`LabelsUi`
* Introduced new `RenderSubGraph`s: `SubGraph2d`, `SubGraph3d`,
`SubGraphUi`
* Removed `Reflect` and `Default` derive from `CameraRenderGraph`
component struct
* Improved some error messages
## Migration Guide
For Nodes and SubGraphs, instead of using hardcoded strings, you now
pass labels, which can be derived with structs and enums.
```rs
// old
#[derive(Default)]
struct MyRenderNode;
impl MyRenderNode {
pub const NAME: &'static str = "my_render_node"
}
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
core_3d::graph::NAME,
MyRenderNode::NAME,
)
.add_render_graph_edges(
core_3d::graph::NAME,
&[
core_3d::graph::node::TONEMAPPING,
MyRenderNode::NAME,
core_3d::graph::node::END_MAIN_PASS_POST_PROCESSING,
],
);
// new
use bevy::core_pipeline::core_3d::graph::{Labels3d, SubGraph3d};
#[derive(Debug, Hash, PartialEq, Eq, Clone, RenderLabel)]
pub struct MyRenderLabel;
#[derive(Default)]
struct MyRenderNode;
render_app
.add_render_graph_node::<ViewNodeRunner<MyRenderNode>>(
SubGraph3d,
MyRenderLabel,
)
.add_render_graph_edges(
SubGraph3d,
(
Labels3d::Tonemapping,
MyRenderLabel,
Labels3d::EndMainPassPostProcessing,
),
);
```
### SubGraphs
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph2d` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `NAME` | `SubGraph3d` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::NAME` | `graph::SubGraphUi` |
### Nodes
#### in `bevy_core_pipeline::core_2d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels2d::MsaaWriteback` |
| `node::MAIN_PASS` | `Labels2d::MainPass` |
| `node::BLOOM` | `Labels2d::Bloom` |
| `node::TONEMAPPING` | `Labels2d::Tonemapping` |
| `node::FXAA` | `Labels2d::Fxaa` |
| `node::UPSCALING` | `Labels2d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels2d::ConstrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels2d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline::core_3d::graph`
| old string-based path | new label |
|-----------------------|-----------|
| `node::MSAA_WRITEBACK` | `Labels3d::MsaaWriteback` |
| `node::PREPASS` | `Labels3d::Prepass` |
| `node::DEFERRED_PREPASS` | `Labels3d::DeferredPrepass` |
| `node::COPY_DEFERRED_LIGHTING_ID` | `Labels3d::CopyDeferredLightingId`
|
| `node::END_PREPASSES` | `Labels3d::EndPrepasses` |
| `node::START_MAIN_PASS` | `Labels3d::StartMainPass` |
| `node::MAIN_OPAQUE_PASS` | `Labels3d::MainOpaquePass` |
| `node::MAIN_TRANSMISSIVE_PASS` | `Labels3d::MainTransmissivePass` |
| `node::MAIN_TRANSPARENT_PASS` | `Labels3d::MainTransparentPass` |
| `node::END_MAIN_PASS` | `Labels3d::EndMainPass` |
| `node::BLOOM` | `Labels3d::Bloom` |
| `node::TONEMAPPING` | `Labels3d::Tonemapping` |
| `node::FXAA` | `Labels3d::Fxaa` |
| `node::UPSCALING` | `Labels3d::Upscaling` |
| `node::CONTRAST_ADAPTIVE_SHARPENING` |
`Labels3d::ContrastAdaptiveSharpening` |
| `node::END_MAIN_PASS_POST_PROCESSING` |
`Labels3d::EndMainPassPostProcessing` |
#### in `bevy_core_pipeline`
| old string-based path | new label |
|-----------------------|-----------|
| `taa::draw_3d_graph::node::TAA` | `Labels3d::Taa` |
#### in `bevy_pbr`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_3d_graph::node::SHADOW_PASS` | `LabelsPbr::ShadowPass` |
| `ssao::draw_3d_graph::node::SCREEN_SPACE_AMBIENT_OCCLUSION` |
`LabelsPbr::ScreenSpaceAmbientOcclusion` |
| `deferred::DEFFERED_LIGHTING_PASS` | `LabelsPbr::DeferredLightingPass`
|
#### in `bevy_render`
| old string-based path | new label |
|-----------------------|-----------|
| `main_graph::node::CAMERA_DRIVER` | `graph::CameraDriverLabel` |
#### in `bevy_ui::render`
| old string-based path | new label |
|-----------------------|-----------|
| `draw_ui_graph::node::UI_PASS` | `graph::LabelsUi::UiPass` |
---
## Future work
* Make `NodeSlot`s also use types. Ideally, we have an enum with unit
variants where every variant resembles one slot. Then to make sure you
are using the right slot enum and make rust-analyzer play nicely with
it, we should make an associated type in the `Node` trait. With today's
system, we can introduce 3rd party slots to a node, and i wasnt sure if
this was used, so I didn't do this in this PR.
## Unresolved Questions
When looking at the `post_processing` example, we have a struct for the
label and a struct for the node, this seems like boilerplate and on
discord, @IceSentry (sowy for the ping)
[asked](https://discord.com/channels/691052431525675048/743663924229963868/1175197016947699742)
if a node could automatically introduce a label (or i completely
misunderstood that). The problem with that is, that nodes like
`EmptyNode` exist multiple times *inside the same* (sub)graph, so there
we need extern labels to distinguish between those. Hopefully we can
find a way to reduce boilerplate and still have everything unique. For
EmptyNode, we could maybe make a macro which implements an "empty node"
for a type, but for nodes which contain code and need to be present
multiple times, this could get nasty...
# Objective
- [`thiserror`](https://docs.rs/thiserror/) is used to derive the error
type on `bevy_dynamic_plugin`'s
[`DynamicPluginLoadError`](https://docs.rs/bevy_dynamic_plugin/latest/bevy_dynamic_plugin/enum.DynamicPluginLoadError.html).
- It is an enum where each variant wraps a `libloading` error type.
- `thiserror` supports marking this internal error types as `#[source]`
so it can automatically fill out the
[`Error::source`](https://doc.rust-lang.org/std/error/trait.Error.html#method.source)
method.
- This allows other error handling libraries to get more information
about the error than what Bevy by default provides. It increases
interoperability between libraries.
## Solution
- Mark the internal `libloading::Error` of `DynamicPluginLoadError` with
`#[source]`.
---
## Changelog
- Implemented the
[`Error::source`](https://doc.rust-lang.org/std/error/trait.Error.html#method.source)
method for
[`DynamicPluginLoadError`](https://docs.rs/bevy_dynamic_plugin/latest/bevy_dynamic_plugin/enum.DynamicPluginLoadError.html).
---
Here is the output from `cargo-expand` before and after the change.
```rust
// Before
impl Error for DynamicPluginLoadError {}
```
```rust
// After
impl Error for DynamicPluginLoadError {
fn source(&self) -> Option<&(dyn Error + 'static)> {
use thiserror::__private::AsDynError as _;
match self {
DynamicPluginLoadError::Library { 0: source, .. } => {
Some(source.as_dyn_error())
}
DynamicPluginLoadError::Plugin { 0: source, .. } => {
Some(source.as_dyn_error())
}
}
}
}
```
# Objective
- SavedAsset's iter_labels returns ```&str```, however accessing
LabeledAssets requires ```CowArc<'static, str>```
- Although SavedAsset holds UntypedHandles in its hashmap of
LabeledAssets, they are inaccessible as LabeledAssets are casted to
SavedAsset or ErasedLoadedAsset, which don't contain their
UntypedHandles
- Adresses #11609
## Solution
- Used Trait bounds to allow for either ```CowArc<'static, str>``` or
```&str``` to be used as a label in get_labeled and get_erased_labeled.
- Added method get_untyped_handle to get UntypedHandle from the
LabeledAsset.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- `impl_reflect_struct` doesn't cover tuple structs or enums.
- Problem brought up [on
Discord](https://discord.com/channels/691052431525675048/1002362493634629796/1190623345817960463).
## Solution
- Replaces `impl_reflect_struct` with the new `impl_reflect` which works
for tuple structs and enums too.
---
## Changelog
- Internally in `bevy_reflect_derive`, we have a new `ReflectProvenance`
type which is composed of `ReflectTraitToImpl` and `ReflectSource`.
- `impl_reflect_struct` is gone and totally superseded by
`impl_reflect`.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Allow `HashMap<Cow<'_, T>, _>` to use `&T` as key for `HashMap::get`
- Makes `CowArc` more like `Cow`
## Solution
Implements `Borrow<T>` and `AsRef<T>` for `CowArc<T>`.
# Objective
Right now, all assets in the main world get extracted and prepared in
the render world (if the asset's using the RenderAssetPlugin). This is
unfortunate for two cases:
1. **TextureAtlas** / **FontAtlas**: This one's huge. The individual
`Image` assets that make up the atlas are cloned and prepared
individually when there's no reason for them to be. The atlas textures
are built on the CPU in the main world. *There can be hundreds of images
that get prepared for rendering only not to be used.*
2. If one loads an Image and needs to transform it in a system before
rendering it, kind of like the [decompression
example](https://github.com/bevyengine/bevy/blob/main/examples/asset/asset_decompression.rs#L120),
there's a price paid for extracting & preparing the asset that's not
intended to be rendered yet.
------
* References #10520
* References #1782
## Solution
This changes the `RenderAssetPersistencePolicy` enum to bitflags. I felt
that the objective with the parameter is so similar in nature to wgpu's
[`TextureUsages`](https://docs.rs/wgpu/latest/wgpu/struct.TextureUsages.html)
and
[`BufferUsages`](https://docs.rs/wgpu/latest/wgpu/struct.BufferUsages.html),
that it may as well be just like that.
```rust
// This asset only needs to be in the main world. Don't extract and prepare it.
RenderAssetUsages::MAIN_WORLD
// Keep this asset in the main world and
RenderAssetUsages::MAIN_WORLD | RenderAssetUsages::RENDER_WORLD
// This asset is only needed in the render world. Remove it from the asset server once extracted.
RenderAssetUsages::RENDER_WORLD
```
### Alternate Solution
I considered introducing a third field to `RenderAssetPersistencePolicy`
enum:
```rust
enum RenderAssetPersistencePolicy {
/// Keep the asset in the main world after extracting to the render world.
Keep,
/// Remove the asset from the main world after extracting to the render world.
Unload,
/// This doesn't need to be in the render world at all.
NoExtract, // <-----
}
```
Functional, but this seemed like shoehorning. Another option is renaming
the enum to something like:
```rust
enum RenderAssetExtractionPolicy {
/// Extract the asset and keep it in the main world.
Extract,
/// Remove the asset from the main world after extracting to the render world.
ExtractAndUnload,
/// This doesn't need to be in the render world at all.
NoExtract,
}
```
I think this last one could be a good option if the bitflags are too
clunky.
## Migration Guide
* `RenderAssetPersistencePolicy::Keep` → `RenderAssetUsage::MAIN_WORLD |
RenderAssetUsage::RENDER_WORLD` (or `RenderAssetUsage::default()`)
* `RenderAssetPersistencePolicy::Unload` →
`RenderAssetUsage::RENDER_WORLD`
* For types implementing the `RenderAsset` trait, change `fn
persistence_policy(&self) -> RenderAssetPersistencePolicy` to `fn
asset_usage(&self) -> RenderAssetUsages`.
* Change any references to `cpu_persistent_access`
(`RenderAssetPersistencePolicy`) to `asset_usage` (`RenderAssetUsage`).
This applies to `Image`, `Mesh`, and a few other types.
# Objective
- Address a `TODO` item in `bevy_animation`.
## Solution
- Replace the `cubic_spline_interpolation` macro with a function.
The function isn't marked as `#[inline(always)]` but from what I checked
with `cargo asm` it gets inlined (even in debug, unless I explicitly add
`#[inline(never)]`), so this should be identical to the macro. If needed
I can add the attribute.
Updates the requirements on
[erased-serde](https://github.com/dtolnay/erased-serde) to permit the
latest version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/erased-serde/releases">erased-serde's
releases</a>.</em></p>
<blockquote>
<h2>0.4.2</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8f555a2db2"><code>8f555a2</code></a>
Release 0.4.2</li>
<li><a
href="450a9108fc"><code>450a910</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="4726cdb49d"><code>4726cdb</code></a>
Release 0.4.1</li>
<li><a
href="4e04e70902"><code>4e04e70</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/101">#101</a>
from dtolnay/sererror</li>
<li><a
href="c670c72da5"><code>c670c72</code></a>
Preserve error message of errors originated from Serialize impl</li>
<li><a
href="6893670cca"><code>6893670</code></a>
Ignore box_collection clippy lint</li>
<li><a
href="7ddf6aadd8"><code>7ddf6aa</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/100">#100</a>
from KodrAus/fix/failing-serialize-impl</li>
<li><a
href="8227d20573"><code>8227d20</code></a>
handle the case where a Serialize fails without calling the
Serializer</li>
<li><a
href="160c15393e"><code>160c153</code></a>
Release 0.4.0</li>
<li><a
href="2e48977019"><code>2e48977</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/99">#99</a>
from dtolnay/bench</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/erased-serde/compare/0.3.0...0.4.2">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
Revert the changes to type parameter bounds introduced in #9046,
improves the `#[reflect(where)]` attribute (also from #9046), and adds
the ability to opt out of field bounds.
This is based on suggestions by @soqb and discussion on
[Discord](https://discord.com/channels/691052431525675048/1002362493634629796/1201227833826103427).
## Solution
Reverts the changes to type parameter bounds when deriving `Reflect`,
introduced in #9046. This was originally done as a means of fixing a
recursion issue (#8965). However, as @soqb pointed out, we could achieve
the same result by simply making an opt-out attribute instead of messing
with the type parameter bounds.
This PR has four main changes:
1. Reverts the type parameter bounds from #9046
2. Includes `TypePath` as a default bound for active fields
3. Changes `#reflect(where)]` to be strictly additive
4. Adds `#reflect(no_field_bounds)]` to opt out of field bounds
Change 1 means that, like before, type parameters only receive at most
the `TypePath` bound (if `#[reflect(type_path = false)]` is not present)
and active fields receive the `Reflect` or `FromReflect` bound. And with
Change 2, they will also receive `TypePath` (since it's indirectly
required by `Typed` to construct `NamedField` and `UnnamedField`
instances).
Change 3 was made to make room for Change 4. By splitting out the
responsibility of `#reflect(where)]`, we can use it with or without
`#reflect(no_field_bounds)]` for various use cases.
For example, if we hadn't done this, the following would have failed:
```rust
// Since we're not using `#reflect(no_field_bounds)]`,
// `T::Assoc` is automatically given the required bounds
// of `FromReflect + TypePath`
#[derive(Reflect)]
#[reflect(where T::Assoc: OtherTrait)]
struct Foo<T: MyTrait> {
value: T::Assoc,
}
```
This provides more flexibility to the user while still letting them add
or remove most trait bounds.
And to solve the original recursion issue, we can do:
```rust
#[derive(Reflect)]
#[reflect(no_field_bounds)] // <-- Added
struct Foo {
foo: Vec<Foo>
}
```
#### Bounds
All in all, we now have four sets of trait bounds:
- `Self` gets the bounds `Any + Send + Sync`
- Type parameters get the bound `TypePath`. This can be opted out of
with `#[reflect(type_path = false)]`
- Active fields get the bounds `TypePath` and `FromReflect`/`Reflect`
bounds. This can be opted out of with `#reflect(no_field_bounds)]`
- Custom bounds can be added with `#[reflect(where)]`
---
## Changelog
- Revert some changes #9046
- `#reflect(where)]` is now strictly additive
- Added `#reflect(no_field_bounds)]` attribute to opt out of automatic
field trait bounds when deriving `Reflect`
- Made the `TypePath` requirement on fields when deriving `Reflect` more
explicit
## Migration Guide
> [!important]
> This PR shouldn't be a breaking change relative to the current version
of Bevy (v0.12). And since it removes the breaking parts of #9046, that
PR also won't need a migration guide.
# Objective
Currently, the `Capsule` primitive is technically dimension-agnostic in
that it implements both `Primitive2d` and `Primitive3d`. This seems good
on paper, but it can often be useful to have separate 2D and 3D versions
of primitives.
For example, one might want a two-dimensional capsule mesh. We can't
really implement both 2D and 3D meshing for the same type using the
upcoming `Meshable` trait (see #11431). We also currently don't
implement `Bounded2d` for `Capsule`, see
https://github.com/bevyengine/bevy/pull/11336#issuecomment-1890797788.
Having 2D and 3D separate at a type level is more explicit, and also
more consistent with the existing primitives, as there are no other
types that implement both `Primitive2d` and `Primitive3d` at the same
time.
## Solution
Rename `Capsule` to `Capsule3d` and add `Capsule2d`. `Capsule2d`
implements `Bounded2d`.
For now, I went for `Capsule2d` for the sake of consistency and clarity.
Mathematically the more accurate term would be `Stadium` or `Pill` (see
[Wikipedia](https://en.wikipedia.org/wiki/Stadium_(geometry))), but
those might be less obvious to game devs. For reference, Godot has
[`CapsuleShape2D`](https://docs.godotengine.org/en/stable/classes/class_capsuleshape2d.html).
I can rename it if others think the geometrically correct name is better
though.
---
## Changelog
- Renamed `Capsule` to `Capsule3d`
- Added `Capsule2d` with `Bounded2d` implemented
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#11479
## Solution
- Remove `collide_aabb.rs`
- Re-implement the example-specific collision code in the example,
taking advantage of the new `IntersectsVolume` trait.
## Changelog
- Removed `sprite::collide_aabb::collide` and
`sprite::collide_aabb::Collision`.
## Migration Guide
`sprite::collide_aabb::collide` and `sprite::collide_aabb::Collision`
were removed.
```rust
// Before
let collision = bevy::sprite::collide_aabb::collide(a_pos, a_size, b_pos, b_size);
if collision.is_some() {
// ...
}
// After
let collision = Aabb2d::new(a_pos.truncate(), a_size / 2.)
.intersects(&Aabb2d::new(b_pos.truncate(), b_size / 2.));
if collision {
// ...
}
```
If you were making use `collide_aabb::Collision`, see the new
`collide_with_side` function in the [`breakout`
example](https://bevyengine.org/examples/Games/breakout/).
## Discussion
As discussed in the linked issue, maybe we want to wait on `bevy_sprite`
generally making use of `Aabb2b` so users don't need to construct it
manually. But since they **do** need to construct the bounding circle
for the ball manually, this doesn't seem like a big deal to me.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
When developing my game I realized `extract_clusters` and
`prepare_clusters` systems are taking a lot of time despite me creating
very little lights. Reducing number of clusters from the default 4096 to
2048 or less greatly improved performance and stabilized FPS (~300 ->
1000+). I debugged it and found out that the main reason for this is
cloning `VisiblePointLights` in `extract_clusters` system. It contains
light entities grouped by clusters that they affect. The problem is that
we clone 4096 (assuming the default clusters configuration) vectors
every frame. If many of them happen to be non-empty it starts to be a
bottleneck because there is a lot of heap allocation. It wouldn't be a
problem if we reused those vectors in following frames but we don't.
## Solution
Avoid cloning multiple vectors and instead build a single vector
containing data for all clusters.
I've recorded a trace in `3d_scene` example with disabled v-sync before
and after the change.
Mean FPS went from 424 to 990. Mean time for `extract_clusters` system
was reduced from 210 us to 24 us and `prepare_clusters` from 189 us to
87 us.
---
## Changelog
- Improved performance of `extract_clusters` and `prepare_clusters`
systems for scenes where lights affect a big part of it.
# Objective
Fixes: https://github.com/bevyengine/bevy/issues/11549
Add a doctest example of what a custom implementation of an
`EntityMapper` would look like.
(need to wait until https://github.com/bevyengine/bevy/pull/11428 is
merged)
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
# Objective
The first part of #10569, split up from #11007.
The goal is to implement meshing support for Bevy's new geometric
primitives, starting with 2D primitives. 3D meshing will be added in a
follow-up, and we can consider removing the old mesh shapes completely.
## Solution
Add a `Meshable` trait that primitives need to implement to support
meshing, as suggested by the
[RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/12-primitive-shapes.md#meshing).
```rust
/// A trait for shapes that can be turned into a [`Mesh`].
pub trait Meshable {
/// The output of [`Self::mesh`]. This can either be a [`Mesh`]
/// or a builder used for creating a [`Mesh`].
type Output;
/// Creates a [`Mesh`] for a shape.
fn mesh(&self) -> Self::Output;
}
```
This PR implements it for the following primitives:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
The `mesh` method typically returns a builder-like struct such as
`CircleMeshBuilder`. This is needed to support shape-specific
configuration for things like mesh resolution or UV configuration:
```rust
meshes.add(Circle { radius: 0.5 }.mesh().resolution(64));
```
Note that if no configuration is needed, you can even skip calling
`mesh` because `From<MyPrimitive>` is implemented for `Mesh`:
```rust
meshes.add(Circle { radius: 0.5 });
```
I also updated the `2d_shapes` example to use primitives, and tweaked
the colors to have better contrast against the dark background.
Before:
After:
Here you can see the UVs and different facing directions: (taken from
#11007, so excuse the 3D primitives at the bottom left)
---
## Changelog
- Added `bevy_render::mesh::primitives` module
- Added `Meshable` trait and implemented it for:
- `Circle`
- `Ellipse`
- `Rectangle`
- `RegularPolygon`
- `Triangle2d`
- Implemented `Default` and `Copy` for several 2D primitives
- Updated `2d_shapes` example to use primitives
- Tweaked colors in `2d_shapes` example to have better contrast against
the (new-ish) dark background
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Sending and receiving events of the same type in the same system is a
reasonably common need, generally due to event filtering.
- However, actually doing so is non-trivial, as the borrow checker
simultaneous hates mutable and immutable access.
## Solution
- Demonstrate two sensible patterns for doing so.
- Update the `ManualEventReader` docs to be more clear and link to this
example.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: ickk <git@ickk.io>
# Objective
It can sometimes be useful to transform actual `Mesh` data without
needing to change the `Transform` of an entity. For example, one might
want to spawn a circle mesh facing up instead of facing Z, or to spawn a
mesh slightly offset without needing child entities.
## Solution
Add `transform_by` and `transformed_by` methods to `Mesh`. They take a
`Transform` and apply the translation, rotation, and scale to vertex
positions, and the rotation to normals and tangents.
In the `load_gltf` example, with this system:
```rust
fn transform(time: Res<Time>, mut q: Query<&mut Handle<Mesh>>, mut meshes: ResMut<Assets<Mesh>>) {
let sin = 0.0025 * time.elapsed_seconds().sin();
for mesh_handle in &mut q {
if let Some(mesh) = meshes.get_mut(mesh_handle.clone_weak()) {
let transform =
Transform::from_rotation(Quat::from_rotation_y(0.75 * time.delta_seconds()))
.with_scale(Vec3::splat(1.0 + sin));
mesh.transform_by(transform);
}
}
}
```
it looks like this:
https://github.com/bevyengine/bevy/assets/57632562/60432456-6d28-4d06-9c94-2f4148f5acd5
# Objective
Working towards finishing a part of #10572, this PR adds a ton of math
helpers and useful constructors for primitive shapes. I also tried
fixing some naming inconsistencies.
## Solution
- Add mathematical helpers like `area`, `volume`, `perimeter`,
`RegularPolygon::inradius` and so on, trying to cover all core
mathematical properties of each shape
- Add some constructors like `Rectangle::from_corners`,
`Cuboid::from_corners` and `Plane3d::from_points`
I also derived `PartialEq` for the shapes where it's trivial. Primitives
like `Line2d` and `Segment2d` are not trivial because you could argue
that they would be equal if they had an opposite direction.
All mathematical methods have tests with reference values computed by
hand or with external tools.
## Todo
- [x] Add tests to verify that the values from mathematical helpers are
correct
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
Get #11257 changes merged.
I rewrote them one by one checking each to ensure correctness. In
particular, the window rescale logic changes to accomodate mut app
access are double checked. Not all changes have been included as some of
bevy_winit has since changed, and i am not confident including them.
Namely, the `run_app_update_if_should` change.
### Notes to reviewers
Review commits individually, use the "Hide whitespaces" diff display
mode.
## Changelog
* `bevy:🪟:WindowMoved`'s `entity` field has been renamed to
`window`
## Migration Guide
`bevy:🪟:WindowMoved`'s `entity` field has been renamed to
`window`. This is to be more consistent with other windowing events.
Consider changing usage:
```diff
-window_moved.entity
+window_moved.window
```
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Closes#11490.
- Allow retrieving the current asset watch behavior from the
`AssetServer`.
## Solution
- Add the corresponding getter. (also fixes some trailing whitespace).
A corresponding helper could also be added on the `AssetPlugin` struct
(returning `self.watch_for_changes_override.unwrap_or(cfg!(feature =
"watch"))`), but it seems it isn't a current practice to have actual
methods on the plugin structs appart from the `Plugin` impl.
---
## Changelog
### Added
Added `watching_for_changes` getter on `AssetServer`.
---------
Co-authored-by: Mateusz Wachowiak <mateusz_wachowiak@outlook.com>
# Objective
My motivation are to resolve some of the issues I describe in this
[PR](https://github.com/bevyengine/bevy/issues/11415):
- not being able to easily mapping entities because the current
EntityMapper requires `&mut World` access
- not being able to create my own `EntityMapper` because some components
(`Parent` or `Children`) do not provide any public way of modifying the
inner entities
This PR makes the `MapEntities` trait accept a generic type that
implements `Mapper` to perform the mapping.
This means we don't need to use `EntityMapper` to perform our mapping,
we can use any type that implements `Mapper`. Basically this change is
very similar to what `serde` does. Instead of specifying directly how to
map entities for a given type, we have 2 distinct steps:
- the user implements `MapEntities` to define how the type will be
traversed and which `Entity`s will be mapped
- the `Mapper` defines how the mapping is actually done
This is similar to the distinction between `Serialize` (`MapEntities`)
and `Serializer` (`Mapper`).
This allows networking library to map entities without having to use the
existing `EntityMapper` (which requires `&mut World` access and the use
of `world_scope()`)
## Migration Guide
- The existing `EntityMapper` (notably used to replicate `Scenes` across
different `World`s) has been renamed to `SceneEntityMapper`
- The `MapEntities` trait now works with a generic `EntityMapper`
instead of the specific struct `EntityMapper`.
Calls to `fn map_entities(&mut self, entity_mapper: &mut EntityMapper)`
need to be updated to
`fn map_entities<M: EntityMapper>(&mut self, entity_mapper: &mut M)`
- The new trait `EntityMapper` has been added to the prelude
---------
Co-authored-by: Charles Bournhonesque <cbournhonesque@snapchat.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
- `bevy_ui` fails to compile without `bevy_text` being enabled.
- Fixes#11363.
## Solution
- Add `#[cfg(feature = "bevy_text")]` to all items that require it.
I think this change is honestly a bit ugly, but I can't see any other
way around it. I considered making `bevy_text` required, but we agreed
[on
Discord](https://discord.com/channels/691052431525675048/743663673393938453/1196868117486379148)
that there were some use cases for `bevy_ui` without `bevy_text`. If you
have any ideas that decreases the amount of `#[cfg(...)]`s and
`#[allow(...)]`s, that would be greatly appreciated.
This was tested by running the following commands:
```shell
$ cargo clippy -p bevy_ui
$ cargo clippy -p bevy_ui -F bevy_text
$ cargo run -p ci
```
---
## Changelog
- Fixed `bevy_ui` not compiling without `bevy_text`.
# Objective
Fixes#8965.
#### Background
For convenience and to ensure everything is setup properly, we
automatically add certain bounds to the derived types. The current
implementation does this by taking the types from all active fields and
adding them to the where-clause of the generated impls. I believe this
method was chosen because it won't add bounds to types that are
otherwise ignored.
```rust
#[derive(Reflect)]
struct Foo<T, U: SomeTrait, V> {
t: T,
u: U::Assoc,
#[reflect(ignore)]
v: [V; 2]
}
// Generates something like:
impl<T, U: SomeTrait, V> for Foo<T, U, V>
where
// Active:
T: Reflect,
U::Assoc: Reflect,
// Ignored:
[V; 2]: Send + Sync + Any
{
// ...
}
```
The self-referential type fails because it ends up using _itself_ as a
type bound due to being one of its own active fields.
```rust
#[derive(Reflect)]
struct Foo {
foo: Vec<Foo>
}
// Foo where Vec<Foo>: Reflect -> Vec<T> where T: Reflect -> Foo where Vec<Foo>: Reflect -> ...
```
## Solution
We can't simply parse all field types for the name of our type. That
would be both complex and prone to errors and false-positives. And even
if it wasn't, what would we replace the bound with?
Instead, I opted to go for a solution that only adds the bounds to what
really needs it: the type parameters. While the bounds on concrete types
make errors a bit cleaner, they aren't strictly necessary. This means we
can change our generated where-clause to only add bounds to generic type
parameters.
Doing this, though, returns us back to the problem of over-bounding
parameters that don't need to be bounded. To solve this, I added a new
container attribute (based on
[this](https://github.com/dtolnay/syn/issues/422#issuecomment-406882925)
comment and @nicopap's
[comment](https://github.com/bevyengine/bevy/pull/9046#issuecomment-1623593780))
that allows us to pass in a custom where clause to modify what bounds
are added to these type parameters.
This allows us to do stuff like:
```rust
trait Trait {
type Assoc;
}
// We don't need `T` to be reflectable since we only care about `T::Assoc`.
#[derive(Reflect)]
#[reflect(where T::Assoc: FromReflect)]
struct Foo<T: Trait>(T::Assoc);
#[derive(TypePath)]
struct Bar;
impl Trait for Bar {
type Assoc = usize;
}
#[derive(Reflect)]
struct Baz {
a: Foo<Bar>,
}
```
> **Note**
> I also
[tried](dc139ea34c)
allowing `#[reflect(ignore)]` to be used on the type parameters
themselves, but that proved problematic since the derive macro does not
consume the attribute. This is why I went with the container attribute
approach.
### Alternatives
One alternative could possibly be to just not add reflection bounds
automatically (i.e. only add required bounds like `Send`, `Sync`, `Any`,
and `TypePath`).
The downside here is we add more friction to using reflection, which
already comes with its own set of considerations. This is a potentially
viable option, but we really need to consider whether or not the
ergonomics hit is worth it.
If we did decide to go the more manual route, we should at least
consider something like #5772 to make it easier for users to add the
right bounds (although, this could still become tricky with
`FromReflect` also being automatically derived).
### Open Questions
1. Should we go with this approach or the manual alternative?
2. ~~Should we add a `skip_params` attribute to avoid the `T: 'static`
trick?~~ ~~Decided to go with `custom_where()` as it's the simplest~~
Scratch that, went with a normal where clause
3. ~~`custom_where` bikeshedding?~~ No longer needed since we are using
a normal where clause
### TODO
- [x] Add compile-fail tests
---
## Changelog
- Fixed issue preventing recursive types from deriving `Reflect`
- Changed how where-clause bounds are generated by the `Reflect` derive
macro
- They are now only applied to the type parameters, not to all active
fields
- Added `#[reflect(where T: Trait, U::Assoc: Trait, ...)]` container
attribute
## Migration Guide
When deriving `Reflect`, generic type params that do not need the
automatic reflection bounds (such as `Reflect`) applied to them will
need to opt-out using a custom where clause like: `#[reflect(where T:
Trait, U::Assoc: Trait, ...)]`.
The attribute can define custom bounds only used by the reflection
impls. To simply opt-out all the type params, we can pass in an empty
where clause: `#[reflect(where)]`.
```rust
// BEFORE:
#[derive(Reflect)]
struct Foo<T>(#[reflect(ignore)] T);
// AFTER:
#[derive(Reflect)]
#[reflect(where)]
struct Foo<T>(#[reflect(ignore)] T);
```
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Fixes#11569
## Solution
- Add new methods to the Ext Trait
---
## Changelog
### Added
- Added new methods to the trait `AppGizmoBuilder`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Implement common traits on primitives
## Solution
- Derive PartialEq on types that were missing it.
- Derive Copy on small types that were missing it.
- Derive Serialize/Deserialize if the feature on bevy_math is enabled.
- Add a lot of cursed stuff to the bevy_reflect `impls` module.
# Objective
- I wanted this for an example, and I think it's a fundamentally handy
debugging tool (with already public fields).
## Solution
- `derive(Debug)` for `FrameCount`
# Objective
- Fixes#11453
This is a temporary fix. There is PR fixing it (#11460), but I'm not
sure if it's going to be merged before the 0.13 release.
# Objective
- Implement an arc3d API for gizmos
- Solves #11536
## Solution
### `arc_3d`
- The current `arc3d` method on gizmos only takes an angle
- It draws an "standard arc" by default, this is an arc starting at
`Vec3::X`, in the XZ plane, in counter clockwise direction with a normal
that is facing up
- The "standard arc" can be customized with the usual gizmo builder
pattern. This way you'll be able to draw arbitrary arcs
### `short/long_arc_3d_between`
- Given `center`, `from`, `to` draws an arc between `from` and `to`
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: `Gizmos::arc3d(&mut self, angle)` method
- Added: `Gizmos::long_arc_3d_between(&mut self, center, from, to)`
method
- Added: `Gizmos::short_arc_3d_between(&mut self, center, from, to)`
method
---
This PR factors out an orthogonal part of another PR as mentioned in
[this
comment](https://github.com/bevyengine/bevy/pull/11072#issuecomment-1883859573)
# Objective
Fixes#11311
## Solution
Adds an example to the documentation for `par_iter_mut`. I didn't add
any examples to `par_iter`, because I couldn't think of a good example
and I figure users can infer that `par_iter` and `par_iter_mut` are
similar.
# Objective
It's sometimes desirable to get a `Res<T>` rather than `&T` from
`World::get_resource`.
Alternative to #9940, partly adresses #9926
## Solution
added additional methods to `World` and `UnsafeWorldCell` to retrieve a
resource wrapped in a `Res`.
- `UnsafeWorldCell::get_resource_ref`
- `World::get_resource_ref`
- `World::resource_ref`
I can change it so `World::resource_mut` returns `ResMut` instead of
`Mut` as well if that's desired, but that could also be added later in a
seperate pr.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Mike <mike.hsu@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
# Objective
- Address junk leftover by TypeUuid removal
## Solution
- Get rid of unused deps and imports
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Resolves#11377
## Solution
- Add marker component `IsDefaultUiCamera` that will be choosen first as
the default camera.
If you want the IsDefaultUiCamera default camera to be in another
window, thats now possible.
- `IsDefaultUiCamera` is expected to be within a single Camera, if that
assertion fails, one PrimaryWindow Camera will be choosen.
---
## Changelog
### Added
- Added `IsDefaultUiCamera` marker component.
---------
Co-authored-by: Mateusz Wachowiak <mateusz_wachowiak@outlook.com>
# Objective
Allow TextureAtlasBuilder in AssetLoader.
Fixes#2987
## Solution
- TextureAtlasBuilder no longer hold just AssetIds that are used to
retrieve the actual image data in `finish`, but &Image instead.
- TextureAtlasBuilder now required AssetId only optionally (and it is
only used to retrieve the index from the AssetId in TextureAtlasLayout),
## Issues
- The issue mentioned here
https://github.com/bevyengine/bevy/pull/11474#issuecomment-1904676937
now also extends to the actual atlas texture. In short: Calling
add_texture multiple times for the same texture will lead to duplicate
image data in the atlas texture and additional indices.
If you provide an AssetId we can probably do something to de-duplicate
the entries while keeping insertion order (suggestions welcome on how
exactly). But if you don't then we are out of luck (unless we can and
want to hash the image, which I do not think we want).
---
## Changelog
### Changed
- TextureAtlasBuilder `add_texture` can be called without providing an
AssetId
- TextureAtlasBuilder `finish` no longer takes Assets<Image> and no
longer returns a Handle<Image>
## Migration Guide
- For `add_texture` you need to wrap your AssetId in Some
- `finish` now returns the atlas texture image directly instead of a
handle. Provide the atlas texture to `add` on Assets<Texture> to get a
Handle<Image>
# Objective
allow automatic fixing of bad joint weights.
fix#10447
## Solution
- remove automatic normalization of vertexes with all zero joint
weights.
- add `Mesh::normalize_joint_weights` which fixes zero joint weights,
and also ensures that all weights sum to 1. this is a manual call as it
may be slow to apply to large skinned meshes, and is unnecessary if you
have control over the source assets.
note: this became a more significant problem with 0.12, as weights that
are close to, but not exactly 1 now seem to use `Vec3::ZERO` for the
unspecified weight, where previously they used the entity translation.
# Objective
DXC+DX12 debug builds with an environment map have been broken since
https://github.com/bevyengine/bevy/pull/11366 merged due to an internal
compiler error in DXC. I tracked it down to a single `break` statement
and reported it upstream
(https://github.com/microsoft/DirectXShaderCompiler/issues/6183)
## Solution
Workaround the ICE by setting the for loop index variable to the max
value of the loop to avoid the `break` that's causing the ICE.
This works because it's the last thing in the for loop.
The `reflection_probes` and `pbr` examples both appear to still work
correctly.
# Objective
After #10520, I was experiencing seriously degraded performance that
ended up being due to never-drained `AssetEvent` events causing havoc
inside `extract_render_asset::<A>`. The same events being read over and
over again meant the same assets were being prepared every frame for
eternity. For what it's worth, I was noticing this on a static scene
about every 3rd or so time running my project.
* References #10520
* Fixes#11240
Why these events aren't sometimes drained between frames is beyond me
and perhaps worthy of another investigation, but the approach in this PR
effectively restores the original cached `EventReader` behavior (which
fixes it).
## Solution
I followed the [`CachedSystemState`
example](3a666cab23/crates/bevy_ecs/src/system/function_system.rs (L155))
to make sure that the `EventReader` state is cached between frames like
it used to be when it was an argument of `extract_render_asset::<A>`.
# Objective
Plugins are an incredible tool for encapsulating functionality. They are
low-key one of Bevy's best features. Combined with rust's module and
privacy system, it's a match made in heaven.
The one downside is that they can be a little too verbose to define. 90%
of all plugin definitions look something like this:
```rust
pub struct MyPlugin;
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
}
```
Every so often it gets a little spicier:
```rust
pub struct MyGenericPlugin<T>(PhantomData<T>);
impl<T> Default for MyGenericPlugin<T> {
fn default() -> Self { ... }
}
impl<T> Plugin for MyGenericPlugin<T> { ... }
```
This is an annoying amount of boilerplate. Ideally, plugins should be
focused and small in scope, which means any app is going to have a *lot*
of them. Writing a plugin should be as easy as possible, and the *only*
part of this process that carries any meaning is the body of `fn build`.
## Solution
Implement `Plugin` for functions that take `&mut App` as a parameter.
The two examples above now look like this:
```rust
pub fn my_plugin(app: &mut App) {
app.init_resource::<CameraAssets>()
.add_event::<SetCamera>()
.add_systems(Update, (collect_set_camera_events, drive_camera).chain());
}
pub fn my_generic_plugin<T>(app: &mut App) {
// No need for PhantomData, it just works.
}
```
Almost all plugins can be written this way, which I believe will make
bevy code much more attractive. Less boilerplate and less meaningless
indentation. More plugins with smaller scopes.
---
## Changelog
The `Plugin` trait is now implemented for all functions that take `&mut
App` as their only parameter. This is an abbreviated way of defining
plugins with less boilerplate than manually implementing the trait.
---------
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
# Objective
Fixes#11533
When `AssetPath`s are created from a string type, they are parsed into
an `AssetSource`, a `Path`, and a `Label`.
The current method of parsing has some unnecessary quirks:
- The presence of a `:` character is assumed to be the start of an asset
source indicator.
- This is not necessarily true. There are valid uses of a `:` character
in an asset path, for example an http source's port such as
`localhost:80`.
- If there are multiple instances of `://`, the last one is assumed to
be the asset source deliminator.
- This has some unexpected behavior. Even in a fully formed path, such
as `http://localhost:80`, the `:` between `localhost` and `80` is
assumed to be the start of an asset source, causing an error since it
does not form the full sequence `://`.
## Solution
Changes the `AssetPath`'s `parse_internal` method to be more permissive.
- Only the exact sequence `://` is taken to be the asset source
deliminator, and only the first one if there are multiple.
- As a consequence, it is no longer possible to detect a malformed asset
source deliminator, and so the corresponding error was removed.
# Objective
https://github.com/bevyengine/bevy/pull/5103 caused a bug where
`Sprite::rect` was ignored by the engine. (Did nothing)
## Solution
My solution changes the way how Bevy calculates the rect, based on this
table:
| `atlas_rect` | `Sprite::rect` | Result |
|--------------|----------------|------------------------------------------------------|
| `None` | `None` | `None` |
| `None` | `Some` | `Sprite::rect` |
| `Some` | `None` | `atlas_rect` |
| `Some` | `Some` | `Sprite::rect` is used, relative to `atlas_rect.min`
|
# Objective
One of a few Bevy Asset improvements I would like to make: #11216.
Currently asset processing and asset saving are handled by the same
trait, `AssetSaver`. This makes it difficult to reuse saving
implementations and impossible to have a single "universal" saver for a
given asset type.
## Solution
This PR splits off the processing portion of `AssetSaver` into
`AssetTransformer`, which is responsible for transforming assets. This
change involves adding the `LoadTransformAndSave` processor, which
utilizes the new API. The `LoadAndSave` still exists since it remains
useful in situations where no "transformation" of the asset is done,
such as when compressing assets.
## Notes:
As an aside, Bikeshedding is welcome on the names. I'm not entirely
convinced by `AssetTransformer`, which was chosen mostly because
`AssetProcessor` is taken. Additionally, `LoadTransformSave` may be
sufficient instead of `LoadTransformAndSave`.
---
## Changelog
### Added
- `AssetTransformer` which is responsible for transforming Assets.
- `LoadTransformAndSave`, a `Process` implementation.
### Changed
- Changed `AssetSaver`'s responsibilities from processing and saving to
just saving.
- Updated `asset_processing` example to use new API.
- Old asset .meta files regenerated with new processor.
# Objective
Keep core dependencies up to date.
## Solution
Update the dependencies.
wgpu 0.19 only supports raw-window-handle (rwh) 0.6, so bumping that was
included in this.
The rwh 0.6 version bump is just the simplest way of doing it. There
might be a way we can take advantage of wgpu's new safe surface creation
api, but I'm not familiar enough with bevy's window management to
untangle it and my attempt ended up being a mess of lifetimes and rustc
complaining about missing trait impls (that were implemented). Thanks to
@MiniaczQ for the (much simpler) rwh 0.6 version bump code.
Unblocks https://github.com/bevyengine/bevy/pull/9172 and
https://github.com/bevyengine/bevy/pull/10812
~~This might be blocked on cpal and oboe updating their ndk versions to
0.8, as they both currently target ndk 0.7 which uses rwh 0.5.2~~ Tested
on android, and everything seems to work correctly (audio properly stops
when minimized, and plays when re-focusing the app).
---
## Changelog
- `wgpu` has been updated to 0.19! The long awaited arcanization has
been merged (for more info, see
https://gfx-rs.github.io/2023/11/24/arcanization.html), and Vulkan
should now be working again on Intel GPUs.
- Targeting WebGPU now requires that you add the new `webgpu` feature
(setting the `RUSTFLAGS` environment variable to
`--cfg=web_sys_unstable_apis` is still required). This feature currently
overrides the `webgl2` feature if you have both enabled (the `webgl2`
feature is enabled by default), so it is not recommended to add it as a
default feature to libraries without putting it behind a flag that
allows library users to opt out of it! In the future we plan on
supporting wasm binaries that can target both webgl2 and webgpu now that
wgpu added support for doing so (see
https://github.com/bevyengine/bevy/issues/11505).
- `raw-window-handle` has been updated to version 0.6.
## Migration Guide
- `bevy_render::instance_index::get_instance_index()` has been removed
as the webgl2 workaround is no longer required as it was fixed upstream
in wgpu. The `BASE_INSTANCE_WORKAROUND` shaderdef has also been removed.
- WebGPU now requires the new `webgpu` feature to be enabled. The
`webgpu` feature currently overrides the `webgl2` feature so you no
longer need to disable all default features and re-add them all when
targeting `webgpu`, but binaries built with both the `webgpu` and
`webgl2` features will only target the webgpu backend, and will only
work on browsers that support WebGPU.
- Places where you conditionally compiled things for webgl2 need to be
updated because of this change, eg:
- `#[cfg(any(not(feature = "webgl"), not(target_arch = "wasm32")))]`
becomes `#[cfg(any(not(feature = "webgl") ,not(target_arch = "wasm32"),
feature = "webgpu"))]`
- `#[cfg(all(feature = "webgl", target_arch = "wasm32"))]` becomes
`#[cfg(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))]`
- `if cfg!(all(feature = "webgl", target_arch = "wasm32"))` becomes `if
cfg!(all(feature = "webgl", target_arch = "wasm32", not(feature =
"webgpu")))`
- `create_texture_with_data` now also takes a `TextureDataOrder`. You
can probably just set this to `TextureDataOrder::default()`
- `TextureFormat`'s `block_size` has been renamed to `block_copy_size`
- See the `wgpu` changelog for anything I might've missed:
https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Make APIs more consistent and ergonomic by adding a `new` constructor
for `Circle` and `Sphere`.
This could be seen as a redundant "trivial constructor", but in
practise, it seems valuable to me. I have lots of cases where formatting
becomes ugly because of the lack of a constructor, like this:
```rust
Circle {
radius: self.radius(),
}
.contains_local_point(centered_pt)
```
With `new`, it'd be formatted much nicer:
```rust
Circle::new(self.radius()).contains_local_point(centered_pt)
```
Of course, this is just one example, but my circle/sphere definitions
very frequently span three or more lines when they could fit on one.
Adding `new` also increases consistency. `Ellipse` has `new` already,
and so does the mesh version of `Circle`.
## Solution
Add a `new` constructor for `Circle` and `Sphere`.
# Objective
- Fix documentation for `AssetReader::is_directory` (it is currently
exactly the same as docs for `read_directory`)
---------
Co-authored-by: Kanabenki <lucien.menassol@gmail.com>
# Objective
- Some passes recreate a sampler when creating a bind group to be
cached, even if the sampler is always the same.
## Solution
- Store the sampler in the corresponding pipeline resource.
# Objective
While working on #11527 I spotted that the internal field for the label
of a `Schedule` is called `name`. Using `label` seems more in line with
the other naming across Bevy.
## Solution
Renaming the field was straightforward since it's not exposed outside of
the module. This also means a changelog or migration guide isn't
necessary.
# Objective
Fixes#11411
## Solution
- Added a simple example how to create and configure custom schedules
that are run by the `Main` schedule.
- Spot checked some of the API docs used, fixed `App::add_schedule` docs
that referred to a function argument that was removed by #9600.
## Open Questions
- While spot checking the docs, I noticed that the `Schedule` label is
stored in a field called `name` instead of `label`. This seems
unintuitive since the term label is used everywhere else. Should we
change that field name? It was introduced in #9600. If so, I do think
this change would be out of scope for this PR that mainly adds the
example.
# Objective
Rust analyzer kept complaining about a cyclic dependency due to
`bevy_input` having a dev-dependency on `bevy`.
`bevy_input` was also missing `bevy_reflect`'s "smol_str" feature which
it needs to compile on its own.
Fixes#10256
## Solution
Remove the dev-dependency on `bevy` from `bevy_input` since it was only
used to reduce imports for 1 test and 3 doc examples by 1 line each, as
`bevy_input` already has dependencies on everything needed for those
tests and doctests to work.
Add `bevy_reflect`'s "smol_str" feature to `bevy_input`'s dependency
list as it needs it to actually compile.
# Objective
Fixes#10414.
That issue and its comments do a great job of laying out the case for
this.
## Solution
Added an optional `spatial_scale` field to `PlaybackSettings`, which
overrides the default value set on `AudioPlugin`.
## Changelog
- `AudioPlugin::spatial_scale` has been renamed to
`default_spatial_scale`.
- `SpatialScale` is no longer a resource and is wrapped by
`DefaultSpatialScale`.
- Added an optional `spatial_scale` to `PlaybackSettings`.
## Migration Guide
`AudioPlugin::spatial_scale` has been renamed to `default_spatial_scale`
and the default spatial scale can now be overridden on individual audio
sources with `PlaybackSettings::spatial_scale`.
If you were modifying or reading `SpatialScale` at run time, use
`DefaultSpatialScale` instead.
```rust
// before
app.add_plugins(DefaultPlugins.set(AudioPlugin {
spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
// after
app.add_plugins(DefaultPlugins.set(AudioPlugin {
default_spatial_scale: SpatialScale::new(AUDIO_SCALE),
..default()
}));
```
# Objective
TypeUuid is deprecated, remove it.
## Migration Guide
Convert any uses of `#[derive(TypeUuid)]` with `#[derive(TypePath]` for
more complex uses see the relevant
[documentation](https://docs.rs/bevy/latest/bevy/prelude/trait.TypePath.html)
for more information.
---------
Co-authored-by: ebola <dev@axiomatic>
# Objective
- Fixes a hurdle encountered when debugging a panic caused by the file
watcher loading a `.gitignore` file, which was hard to debug because
there was no file name in the report, only `asset paths must have
extensions`
## Solution
- Panic with a formatted message that includes the asset path, e.g.
`missing expected extension for asset path .gitignore`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Doonv <58695417+doonv@users.noreply.github.com>
Updates the requirements on
[ruzstd](https://github.com/KillingSpark/zstd-rs) to permit the latest
version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/releases">ruzstd's
releases</a>.</em></p>
<blockquote>
<h2>Even better no_std</h2>
<p>Switching from thiserror to derive_more allows for no_std builds on
stable rust</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/KillingSpark/zstd-rs/blob/master/Changelog.md">ruzstd's
changelog</a>.</em></p>
<blockquote>
<h1>After 0.5.0</h1>
<ul>
<li>Make the hashing checksum optional (thanks to <a
href="https://github.com/tamird"><code>@tamird</code></a>)
<ul>
<li>breaking change as the public API changes based on features</li>
</ul>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e620d2a856"><code>e620d2a</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/50">#50</a>
from KillingSpark/remove_thiserror</li>
<li><a
href="9e9d204c63"><code>9e9d204</code></a>
make clippy happy</li>
<li><a
href="f4a6fc0cc1"><code>f4a6fc0</code></a>
bump the version, this is an incompatible change</li>
<li><a
href="64d65b5c4f"><code>64d65b5</code></a>
fix test compile...</li>
<li><a
href="07bbda98c8"><code>07bbda9</code></a>
remove the error_in_core feature and switch the io_nostd to use the
Display t...</li>
<li><a
href="e15eb1e568"><code>e15eb1e</code></a>
Merge pull request <a
href="https://redirect.github.com/KillingSpark/zstd-rs/issues/49">#49</a>
from tamird/clippy</li>
<li><a
href="92a3f2e6b2"><code>92a3f2e</code></a>
Avoid unnecessary cast</li>
<li><a
href="f588d5c362"><code>f588d5c</code></a>
Avoid slow zero-filling initialization</li>
<li><a
href="e79f09876f"><code>e79f098</code></a>
Avoid single-match expression</li>
<li><a
href="c75cc2fbb9"><code>c75cc2f</code></a>
Remove useless assertion</li>
<li>Additional commits viewable in <a
href="https://github.com/KillingSpark/zstd-rs/compare/v0.4.0...v0.5.0">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- `AssetPath` implements reflection, but is not registered as a type in
the plugin.
- Fixes#11481.
## Solution
- Register the `AssetPath` type when `AssetPlugin::build` is called.
---
## Changelog
- Registered `AssetPath` type for use in reflection.
# Objective
- `World::get_resource`'s comment on it's `unsafe` usage meant to say
"mutably" but instead said "immutably."
- Fixes#11430.
## Solution
- Replace "immutably" with "mutably."
# Objective
#10946 added bounding volume types and an `IntersectsVolume` trait, but
didn't actually implement intersections between bounding volumes.
This PR implements AABB-AABB, circle-circle / sphere-sphere, and
AABB-circle / AABB-sphere intersections.
## Solution
Implement `IntersectsVolume` for bounding volume pairs. I also added
`closest_point` methods to return the closest point on the surface /
inside of bounding volumes. This is used for AABB-circle / AABB-sphere
intersections.
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
TextureAtlases are commonly used to drive animations described as a
consecutive range of indices. The current TextureAtlasBuilder uses the
AssetId of the image to determine the index of the texture in the
TextureAtlas. The AssetId of an Image Asset can change between runs.
The TextureAtlas exposes
[`get_texture_index`](https://docs.rs/bevy/latest/bevy/sprite/struct.TextureAtlas.html#method.get_texture_index)
to get the index from a given AssetId, but this needlessly complicates
the process of creating a simple TextureAtlas animation.
Fixes#2459
## Solution
- Use the (ordered) image_ids of the 'texture to place' vector to
retrieve the packed locations and compose the textures of the
TextureAtlas.
# Objective
It would be convenient to be able to call functions with `Commands` as a
parameter without having to move your own instance of `Commands`. Since
this struct is composed entirely of references, we can easily get an
owned instance of `Commands` by shortening the lifetime.
## Solution
Add `Commands::reborrow`, `EntiyCommands::reborrow`, and
`Deferred::reborrow`, which returns an owned version of themselves with
a shorter lifetime.
Remove unnecessary lifetimes from `EntityCommands`. The `'w` and `'s`
lifetimes only have to be separate for `Commands` because it's used as a
`SystemParam` -- this is not the case for `EntityCommands`.
---
## Changelog
Added `Commands::reborrow`. This is useful if you have `&mut Commands`
but need `Commands`. Also added `EntityCommands::reborrow` and
`Deferred:reborrow` which serve the same purpose.
## Migration Guide
The lifetimes for `EntityCommands` have been simplified.
```rust
// Before (Bevy 0.12)
struct MyStruct<'w, 's, 'a> {
commands: EntityCommands<'w, 's, 'a>,
}
// After (Bevy 0.13)
struct MyStruct<'a> {
commands: EntityCommands<'a>,
}
```
The method `EntityCommands::commands` now returns `Commands` rather than
`&mut Commands`.
```rust
// Before (Bevy 0.12)
let commands = entity_commands.commands();
commands.spawn(...);
// After (Bevy 0.13)
let mut commands = entity_commands.commands();
commands.spawn(...);
```
# Objective
Document a few common cases of which lifetime is required when using
SystemParam Derive
## Solution
Added a table in the doc comment
---------
Co-authored-by: laund <me@laund.moe>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Prep for https://github.com/bevyengine/bevy/pull/10164
- Make deferred_lighting_pass_id a ColorAttachment
- Correctly extract shadow view frusta so that the view uniforms get
populated
- Make some needed things public
- Misc formatting
# Objective
- Extend reflection to the standard library's `Wrapping` and
`Saturating` generic types.
This wasn't my use-case but someone in the discord was surprised that
this wasn't already done. I decided to make a PR because the other
`std::num` items were reflected and if there's a reason to exclude
`Wrapping` and `Saturating`, I am unaware of it.
## Solution
Trivial fix
---
## Changelog
Implemented `Reflect` for `Wrapping<T>` and `Saturating<T>` from
`std::num`.
# Objective
> Can anyone explain to me the reasoning of renaming all the types named
Query to Data. I'm talking about this PR
https://github.com/bevyengine/bevy/pull/10779 It doesn't make sense to
me that a bunch of types that are used to run queries aren't named Query
anymore. Like ViewQuery on the ViewNode is the type of the Query. I
don't really understand the point of the rename, it just seems like it
hides the fact that a query will run based on those types.
[@IceSentry](https://discord.com/channels/691052431525675048/692572690833473578/1184946251431694387)
## Solution
Revert several renames in #10779.
## Changelog
- `ViewNode::ViewData` is now `ViewNode::ViewQuery` again.
## Migration Guide
- This PR amends the migration guide in
https://github.com/bevyengine/bevy/pull/10779
---------
Co-authored-by: atlas dostal <rodol@rivalrebels.com>
# Objective
- Add the ability to describe storage texture bindings when deriving
`AsBindGroup`.
- This is especially valuable for the compute story of bevy which
deserves some extra love imo.
## Solution
- This add the ability to annotate struct fields with a
`#[storage_texture(0)]` annotation.
- Instead of adding specific option parsing for all the image formats
and access modes, I simply accept a token stream and defer checking to
see if the option is valid to the compiler. This still results in useful
and friendly errors and is free to maintain and always compatible with
wgpu changes.
---
## Changelog
- The `#[storage_texture(..)]` annotation is now accepted for fields of
`Handle<Image>` in structs that derive `AsBindGroup`.
- The game_of_life compute shader example has been updated to use
`AsBindGroup` together with `[storage_texture(..)]` to obtain the
`BindGroupLayout`.
## Migration Guide
# Objective
#8219 changed the target type of a `transmute` without changing the one
transmuting from ([see the relevant
diff](55e9ab7c92 (diff-11413fb2eeba97978379d325353d32aa76eefd0af0c8e9b50b7f394ddfda7a26R351-R355))),
making them incompatible. This PR fixes this by changing the initial
type to match the target one (modulo lifetimes).
## Solution
Change the type to be transmuted from to match the one transmuting into
(modulo lifetimes)
# Objective
- This PR makes it so that `ReflectSerialize` and `ReflectDeserialize`
traits are properly derived on `Name`. This avoids having the internal
hash “leak” into the serialization when using reflection.
## Solution
- Added a conditional derive for `ReflectDeserialize` and
`ReflectSerialize` via `#[cfg_attr()]`
---
## Changelog
- `Name` now implements `ReflectDeserialize` and `ReflectSerialize`
whenever the `serialize` feature is enabled.
# Objective
Fix weird visuals when drawing a gizmo with a non-normed normal.
Fixes#11401
## Solution
Just normalize right before we draw. Could do it when constructing the
builder but that seems less consistent.
## Changelog
- gizmos.circle normal is now a Direction3d instead of a Vec3.
## Migration Guide
- Pass a Direction3d for gizmos.circle normal, eg.
`Direction3d::new(vec).unwrap_or(default)` or potentially
`Direction3d::new_unchecked(vec)` if you know your vec is definitely
normalized.
# Objective
- Since #11218, example `asset_processing` fails:
```
thread 'main' panicked at crates/bevy_asset/src/io/source.rs:489:18:
Failed to create file watcher: Error { kind: PathNotFound, paths: ["examples/asset/processing/imported_assets/Default"] }
```
start from a fresh git clone or delete the folder before running to
reproduce, it is in gitignore and should not be present on a fresh run
a657478675/.gitignore (L18)
## Solution
- Auto create the `imported_assets` folder if it is configured
---------
Co-authored-by: Kyle <37520732+nvdaz@users.noreply.github.com>
# Objective
`Direction2d::from_normalized` & `Direction3d::from_normalized` don't
emphasize that importance of the vector being normalized enough.
## Solution
Rename `from_normalized` to `new_unchecked` and add more documentation.
---
`Direction2d` and `Direction3d` were added somewhat recently in
https://github.com/bevyengine/bevy/pull/10466 (after 0.12), so I don't
think documenting the changelog and migration guide is necessary (Since
there is no major previous version to migrate from).
But here it is anyway in case it's needed:
## Changelog
- Renamed `Direction2d::from_normalized` and
`Direction3d::from_normalized` to `new_unchecked`.
## Migration Guide
- Renamed `Direction2d::from_normalized` and
`Direction3d::from_normalized` to `new_unchecked`.
---------
Co-authored-by: Tristan Guichaoua <33934311+tguichaoua@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Currently, the `primitives` module is inside of the prelude for
`bevy_math`, but the actual primitives are not. This requires either
importing the shapes everywhere that uses them, or adding the
`primitives::` prefix:
```rust
let rectangle = meshes.add(primitives::Rectangle::new(5.0, 2.5));
```
(Note: meshing isn't actually implemented yet, but it's in #11431)
The primitives are meant to be used for a variety of tasks across
several crates, like for meshing, bounding volumes, gizmos, colliders,
and so on, so I think having them in the prelude is justified. It would
make several common tasks a lot more ergonomic.
```rust
let rectangle = meshes.add(Rectangle::new(5.0, 2.5));
```
## Solution
Add `primitives::*` to `bevy_math::prelude`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Currently, the only way to create an AABB is to specify its `min` and
`max` coordinates. However, it's often more useful to use the center and
half-size instead.
## Solution
Add `new` constructors for `Aabb2d` and `Aabb3d`.
This:
```rust
let aabb = Aabb3d {
min: center - half_size,
max: center + half_size,
}
```
becomes this:
```rust
let aabb = Aabb3d::new(center, half_size);
```
I also made the usage of "half-extents" vs. "half-size" a bit more
consistent.
# Objective
Currently, the `Ellipse` primitive is represented by a `half_width` and
`half_height`. To improve consistency (similarly to #11434), it might
make more sense to use a `Vec2` `half_size` instead.
Alternatively, to make the elliptical nature clearer, the properties
could also be called `radius_x` and `radius_y`.
Secondly, `Ellipse::new` currently takes a *full* width and height
instead of two radii. I would expect it to take the half-width and
half-height because ellipses and circles are almost always defined using
radii. I wouldn't expect `Circle::new` to take a diameter (if we had
that method).
## Solution
Change `Ellipse` to store a `half_size` and `new` to take the half-width
and half-height.
I also added a `from_size` method similar to `Rectangle::from_size`, and
added the `semi_minor` and `semi_major` helpers to get the
semi-minor/major radius.
# Objective
The `Rectangle` and `Cuboid` primitives currently use different
representations:
```rust
pub struct Rectangle {
/// The half width of the rectangle
pub half_width: f32,
/// The half height of the rectangle
pub half_height: f32,
}
pub struct Cuboid {
/// Half of the width, height and depth of the cuboid
pub half_extents: Vec3,
}
```
The property names and helpers are also inconsistent. `Cuboid` has
`half_extents`, but it also has a method called `from_size`. Most
existing code also uses "size" instead of "extents".
## Solution
Represent both `Rectangle` and `Cuboid` with `half_size` properties.
# Objective
Implements #9216
## Solution
- Replace `DiagnosticId` by `DiagnosticPath`. It's pre-hashed using
`const-fnv1a-hash` crate, so it's possible to create path in const
contexts.
---
## Changelog
- Replaced `DiagnosticId` by `DiagnosticPath`
- Set default history length to 120 measurements (2 seconds on 60 fps).
I've noticed hardcoded constant 20 everywhere and decided to change it
to `DEFAULT_MAX_HISTORY_LENGTH` , which is set to new diagnostics by
default. To override it, use `with_max_history_length`.
## Migration Guide
```diff
- const UNIQUE_DIAG_ID: DiagnosticId = DiagnosticId::from_u128(42);
+ const UNIQUE_DIAG_PATH: DiagnosticPath = DiagnosticPath::const_new("foo/bar");
- Diagnostic::new(UNIQUE_DIAG_ID, "example", 10)
+ Diagnostic::new(UNIQUE_DIAG_PATH).with_max_history_length(10)
- diagnostics.add_measurement(UNIQUE_DIAG_ID, || 42);
+ diagnostics.add_measurement(&UNIQUE_DIAG_ID, || 42);
```
# Objective
- since #9685 ,bevy introduce automatic batching of draw commands,
- `batch_and_prepare_render_phase` take the responsibility for batching
`phaseItem`,
- `GetBatchData` trait is used for indentify each phaseitem how to
batch. it defines a associated type `Data `used for Query to fetch data
from world.
- however,the impl of `GetBatchData ` in bevy always set ` type
Data=Entity` then we acually get following code
`let entity:Entity =query.get(item.entity())` that cause unnecessary
overhead .
## Solution
- remove associated type `Data ` and `Filter` from `GetBatchData `,
- change the type of the `query_item ` parameter in get_batch_data from`
Self::Data` to `Entity`.
- `batch_and_prepare_render_phase ` no longer takes a query using
`F::Data, F::Filter`
- `get_batch_data `now returns `Option<(Self::BufferData,
Option<Self::CompareData>)>`
---
## Performance
based in main merged with #11290
Window 11 ,Intel 13400kf, NV 4070Ti
frame time from 3.34ms to 3 ms, ~ 10%
`batch_and_prepare_render_phase` from 800us ~ 400 us
## Migration Guide
trait `GetBatchData` no longer hold associated type `Data `and `Filter`
`get_batch_data` `query_item `type from `Self::Data` to `Entity` and
return `Option<(Self::BufferData, Option<Self::CompareData>)>`
`batch_and_prepare_render_phase` should not have a query
# Objective
Adjust bevy internals to utilize `Option<Res<State<S>>>` instead of
`Res<State<S>>`, to allow for adding/removing states at runtime and
avoid unexpected panics.
As requested here:
https://github.com/bevyengine/bevy/pull/10088#issuecomment-1869185413
---
## Changelog
- Changed the use of `world.resource`/`world.resource_mut` to
`world.get_resource`/`world.get_resource_mut` in the
`run_enter_schedule` and `apply_state_transition` systems and handled
the `None` option.
- `in_state` now returns a ` FnMut(Option<Res<State<S>>>) -> bool +
Clone`, returning `false` if the resource doesn't exist.
- `state_exists_and_equals` was marked as deprecated, and now just runs
and returns `in_state`, since their bevhaviour is now identical
- `state_changed` now takes an `Option<Res<State<S>>>` and returns
`false` if it does not exist.
I would like to remove `state_exists_and_equals` fully, but wanted to
ensure that is acceptable before doing so.
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
# Objective
- `FromType<T>` for `ReflectComponent` and `ReflectBundle` currently
require `T: FromWorld` for two reasons:
- they include a `from_world` method;
- they create dummy `T`s using `FromWorld` and then `apply` a `&dyn
Reflect` to it to simulate `FromReflect`.
- However `FromWorld`/`Default` may be difficult/weird/impractical to
implement, while `FromReflect` is easier and also more natural for the
job.
- See also
https://discord.com/channels/691052431525675048/1146022009554337792
## Solution
- Split `from_world` from `ReflectComponent` and `ReflectBundle` into
its own `ReflectFromWorld` struct.
- Replace the requirement on `FromWorld` in `ReflectComponent` and
`ReflectBundle` with `FromReflect`
---
## Changelog
- `ReflectComponent` and `ReflectBundle` no longer offer a `from_world`
method.
- `ReflectComponent` and `ReflectBundle`'s `FromType<T>` implementation
no longer requires `T: FromWorld`, but now requires `FromReflect`.
- `ReflectComponent::insert`, `ReflectComponent::apply_or_insert` and
`ReflectComponent::copy` now take an extra `&TypeRegistry` parameter.
- There is now a new `ReflectFromWorld` struct.
## Migration Guide
- Existing uses of `ReflectComponent::from_world` and
`ReflectBundle::from_world` will have to be changed to
`ReflectFromWorld::from_world`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` will need to
also implement/derive `FromReflect`.
- Users of `#[reflect(Component)]` and `#[reflect(Bundle)]` may now want
to also add `FromWorld` to the list of reflected traits in case their
`FromReflect` implementation may fail.
- Users of `ReflectComponent` will now need to pass a `&TypeRegistry` to
its `insert`, `apply_or_insert` and `copy` methods.
This pull request re-submits #10057, which was backed out for breaking
macOS, iOS, and Android. I've tested this version on macOS and Android
and on the iOS simulator.
# Objective
This pull request implements *reflection probes*, which generalize
environment maps to allow for multiple environment maps in the same
scene, each of which has an axis-aligned bounding box. This is a
standard feature of physically-based renderers and was inspired by [the
corresponding feature in Blender's Eevee renderer].
## Solution
This is a minimal implementation of reflection probes that allows
artists to define cuboid bounding regions associated with environment
maps. For every view, on every frame, a system builds up a list of the
nearest 4 reflection probes that are within the view's frustum and
supplies that list to the shader. The PBR fragment shader searches
through the list, finds the first containing reflection probe, and uses
it for indirect lighting, falling back to the view's environment map if
none is found. Both forward and deferred renderers are fully supported.
A reflection probe is an entity with a pair of components, *LightProbe*
and *EnvironmentMapLight* (as well as the standard *SpatialBundle*, to
position it in the world). The *LightProbe* component (along with the
*Transform*) defines the bounding region, while the
*EnvironmentMapLight* component specifies the associated diffuse and
specular cubemaps.
A frequent question is "why two components instead of just one?" The
advantages of this setup are:
1. It's readily extensible to other types of light probes, in particular
*irradiance volumes* (also known as ambient cubes or voxel global
illumination), which use the same approach of bounding cuboids. With a
single component that applies to both reflection probes and irradiance
volumes, we can share the logic that implements falloff and blending
between multiple light probes between both of those features.
2. It reduces duplication between the existing *EnvironmentMapLight* and
these new reflection probes. Systems can treat environment maps attached
to cameras the same way they treat environment maps applied to
reflection probes if they wish.
Internally, we gather up all environment maps in the scene and place
them in a cubemap array. At present, this means that all environment
maps must have the same size, mipmap count, and texture format. A
warning is emitted if this restriction is violated. We could potentially
relax this in the future as part of the automatic mipmap generation
work, which could easily do texture format conversion as part of its
preprocessing.
An easy way to generate reflection probe cubemaps is to bake them in
Blender and use the `export-blender-gi` tool that's part of the
[`bevy-baked-gi`] project. This tool takes a `.blend` file containing
baked cubemaps as input and exports cubemap images, pre-filtered with an
embedded fork of the [glTF IBL Sampler], alongside a corresponding
`.scn.ron` file that the scene spawner can use to recreate the
reflection probes.
Note that this is intentionally a minimal implementation, to aid
reviewability. Known issues are:
* Reflection probes are basically unsupported on WebGL 2, because WebGL
2 has no cubemap arrays. (Strictly speaking, you can have precisely one
reflection probe in the scene if you have no other cubemaps anywhere,
but this isn't very useful.)
* Reflection probes have no falloff, so reflections will abruptly change
when objects move from one bounding region to another.
* As mentioned before, all cubemaps in the world of a given type
(diffuse or specular) must have the same size, format, and mipmap count.
Future work includes:
* Blending between multiple reflection probes.
* A falloff/fade-out region so that reflected objects disappear
gradually instead of vanishing all at once.
* Irradiance volumes for voxel-based global illumination. This should
reuse much of the reflection probe logic, as they're both GI techniques
based on cuboid bounding regions.
* Support for WebGL 2, by breaking batches when reflection probes are
used.
These issues notwithstanding, I think it's best to land this with
roughly the current set of functionality, because this patch is useful
as is and adding everything above would make the pull request
significantly larger and harder to review.
---
## Changelog
### Added
* A new *LightProbe* component is available that specifies a bounding
region that an *EnvironmentMapLight* applies to. The combination of a
*LightProbe* and an *EnvironmentMapLight* offers *reflection probe*
functionality similar to that available in other engines.
[the corresponding feature in Blender's Eevee renderer]:
https://docs.blender.org/manual/en/latest/render/eevee/light_probes/reflection_cubemaps.html
[`bevy-baked-gi`]: https://github.com/pcwalton/bevy-baked-gi
[glTF IBL Sampler]: https://github.com/KhronosGroup/glTF-IBL-Sampler
# Objective
When working within `bevy_ecs`, we can't use the `log_once` macros due
to their placement in `bevy_log` - which depends on `bevy_ecs`. All this
create does is migrate those macros to the `bevy_utils` crate, while
still re-exporting them in `bevy_log`.
created to resolve this:
https://github.com/bevyengine/bevy/pull/11417#discussion_r1458100211
---------
Co-authored-by: François <mockersf@gmail.com>
