# Objective
- Fixes#15236
## Solution
- Use bevy_math::ops instead of std floating point operations.
## Testing
- Did you test these changes? If so, how?
Unit tests and `cargo run -p ci -- test`
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Execute `cargo run -p ci -- test` on Windows.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Windows
## Migration Guide
- Not a breaking change
- Projects should use bevy math where applicable
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Adds the missing API commands `insert_if_new_and` and
`try_insert_if_new_and` (resolves#15105)
- Adds some test coverage for existing insert commands
## Testing
- Implemented additional unit tests to add coverage
# Objective
Right now, `DynSystemParam::downcast()` always requires the type
parameter to be specified with a turbofish. Make it so that it can be
inferred from the use of the return value, like:
```rust
fn expects_res_a(mut param: DynSystemParam) {
let res: Res<A> = param.downcast().unwrap();
}
```
## Solution
The reason this doesn't currently work is that the type parameter is a
`'static` version of the `SystemParam` so that it can be used with
`Any::downcast_mut()`. Change the method signature so that the type
parameter matches the return type, and use `T::Item<'static, 'static>`
to get the `'static` version. That means we wind up returning a
`T::Item<'static, 'static>::Item<'w, 's>`, so constrain that to be equal
to `T`. That works with every `SystemParam` implementation, since they
have `T::Item == T` up to lifetimes.
# Objective
- fix#12853
- Make `Table::allocate` faster
## Solution
The PR consists of multiple steps:
1) For the component data: create a new data-structure that's similar to
`BlobVec` but doesn't store `len` & `capacity` inside of it: "BlobArray"
(name suggestions welcome)
2) For the `Tick` data: create a new data-structure that's similar to
`ThinSlicePtr` but supports dynamic reallocation: "ThinArrayPtr" (name
suggestions welcome)
3) Create a new data-structure that's very similar to `Column` that
doesn't store `len` & `capacity` inside of it: "ThinColumn"
4) Adjust the `Table` implementation to use `ThinColumn` instead of
`Column`
The result is that only one set of `len` & `capacity` is stored in
`Table`, in `Table::entities`
### Notes Regarding Performance
Apart from shaving off some excess memory in `Table`, the changes have
also brought noteworthy performance improvements:
The previous implementation relied on `Vec::reserve` &
`BlobVec::reserve`, but that redundantly repeated the same if statement
(`capacity` == `len`). Now that check could be made at the `Table` level
because the capacity and length of all the columns are synchronized;
saving N branches per allocation. The result is a respectable
performance improvement per every `Table::reserve` (and subsequently
`Table::allocate`) call.
I'm hesitant to give exact numbers because I don't have a lot of
experience in profiling and benchmarking, but these are the results I
got so far:
*`add_remove_big/table` benchmark after the implementation:*
*`add_remove_big/table` benchmark in main branch (measured in comparison
to the implementation):*
*`add_remove_very_big/table` benchmark after the implementation:*
*`add_remove_very_big/table` benchmark in main branch (measured in
comparison to the implementation):*
cc @james7132 to verify
---
## Changelog
- New data-structure that's similar to `BlobVec` but doesn't store `len`
& `capacity` inside of it: `BlobArray`
- New data-structure that's similar to `ThinSlicePtr` but supports
dynamic allocation:`ThinArrayPtr`
- New data-structure that's very similar to `Column` that doesn't store
`len` & `capacity` inside of it: `ThinColumn`
- Adjust the `Table` implementation to use `ThinColumn` instead of
`Column`
- New benchmark: `add_remove_very_big` to benchmark the performance of
spawning a lot of entities with a lot of components (15) each
## Migration Guide
`Table` now uses `ThinColumn` instead of `Column`. That means that
methods that previously returned `Column`, will now return `ThinColumn`
instead.
`ThinColumn` has a much more limited and low-level API, but you can
still achieve the same things in `ThinColumn` as you did in `Column`.
For example, instead of calling `Column::get_added_tick`, you'd call
`ThinColumn::get_added_ticks_slice` and index it to get the specific
added tick.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Fixes#14552
- Make the current note of `before` and `after` understandable.
- > The given set is not implicitly added to the schedule when this
system set is added.
## Solution
- Replace note in docs of [`after` and
`before`](https://docs.rs/bevy/latest/bevy/ecs/prelude/trait.IntoSystemConfigs.html#method.before)
- Note of after was removed completely, and links to `before`, because
they notes would be identical.
- Also encourage to use `.chain`, which is much simpler and safer to use
## Testing
- Checked the docs after running `cargo doc` and `cargo run -p ci --
lints`
- Are there any parts that need more testing?
- no need to test, but please review the text. If it is still including
the intended message and especially if its understandable.
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#14980
## Solution
Only iterate over archetypes containing the component.
## Alternatives
Additionally, for each archetype, cache how many observers are watching
one of its components & use this to speed up the check for each affected
archetype ([implemented
here](55c89aa033)).
Benchmarking showed this to lead only to a minor speedup.
## Testing
There's both already a test checking that observers don't run after
being despawned as well as a regression test for the bug that
necessitates the check this PR optimizes.
# Objective
- Finish resolving https://github.com/bevyengine/bevy/issues/15125
- Inserting bundles was implemented in
https://github.com/bevyengine/bevy/pull/15128 but removing bundles still
needed to be implemented.
## Solution
- Modified `bevy_ecs::reflect::entity_commands::remove_reflect` to
handle both components and bundles
- Modified documentation of `ReflectCommandExt` methods to reflect that
one can now use bundles with these commands.
## Testing
- Three tests were added to match the ones for inserting components.
# Objective
- Remove any ambiguity around how multiple `Observer` components work on
a single `Entity` by completely removing the concept.
- Fixes#15122
## Solution
- Removed type parameters from `Observer`, relying on a function pointer
to provide type information into the relevant aspects of running an
observer.
## Testing
- Ran CI locally.
- Checked `observers.rs` example continued to function as expected.
## Notes
This communicates to users of observers that only a single `Observer`
can be inserted onto an entity at a time within the established type
system. This has been achieved by erasing the type information from the
stored `ObserverSystem` and retrieving it again using a function
pointer. This has the downside of increasing the size of the `Observer`
component and increases the complexity of the observer runner. However,
this complexity was already present, and is in my opinion a worthwhile
tradeoff for the clearer user experience.
The other notable benefit is users no longer need to use the
`ObserverState` component to filter for `Observer` entities, and can
instead use `Observer` directly.
Technically this is a breaking change, since the type signature for
`Observer` has changed. However, it was so cumbersome to use that I
don't believe there are any instances in the wild of users directly
naming `Observer` types, instead relying on `ObserverState`, and the
methods provided by `App` and `World`. As can be seen in the diff, this
change had very little knock-on effects across Bevy.
## Migration Guide
If you filtered for observers using `Observer<A, B>`, instead filter for
an `Observer`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Smaller scoped version of #13375 without the `_mut` variants which
currently have unsoundness issues.
## Solution
Same as #13375, but without the `_mut` variants.
## Testing
- The same test from #13375 is reused.
---
## Migration Guide
- Renamed `FilteredEntityRef::components` to
`FilteredEntityRef::accessed_components` and
`FilteredEntityMut::components` to
`FilteredEntityMut::accessed_components`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
# Objective
`EntityHash` and related types were moved from `bevy_utils` to
`bevy_ecs` in #11498, but seemed to have been accidentally reintroduced
a week later in #11707.
## Solution
Remove the old leftover code.
---
## Migration Guide
- Uses of `bevy::utils::{EntityHash, EntityHasher, EntityHashMap,
EntityHashSet}` now have to be imported from `bevy::ecs::entity`.
# Objective
It's possible to create UB using an implementation of `QueryFilter` that
performs mutable access, but that does not violate any documented safety
invariants.
This code:
```rust
#[derive(Component)]
struct Foo(usize);
// This derive is a simple way to get a valid WorldQuery impl. The QueryData impl isn't used.
#[derive(QueryData)]
#[query_data(mutable)]
struct BadFilter<'w> {
foo: &'w mut Foo,
}
impl QueryFilter for BadFilter<'_> {
const IS_ARCHETYPAL: bool = false;
unsafe fn filter_fetch(
fetch: &mut Self::Fetch<'_>,
entity: Entity,
table_row: TableRow,
) -> bool {
// SAFETY: fetch and filter_fetch have the same safety requirements
let f: &mut usize = &mut unsafe { Self::fetch(fetch, entity, table_row) }.foo.0;
println!("Got &mut at {f:p}");
true
}
}
let mut world = World::new();
world.spawn(Foo(0));
world.run_system_once(|query: Query<&Foo, BadFilter>| {
let f: &usize = &query.iter().next().unwrap().0;
println!("Got & at {f:p}");
query.iter().next().unwrap();
println!("Still have & at {f:p}");
});
```
prints:
```
Got &mut at 0x1924b92dfb0
Got & at 0x1924b92dfb0
Got &mut at 0x1924b92dfb0
Still have & at 0x1924b92dfb0
```
Which means it had an `&` and `&mut` alive at the same time.
The only `unsafe` there is around `Self::fetch`, but I believe that call
correctly upholds the safety invariant, and matches what `Added` and
`Changed` do.
## Solution
Make `QueryFilter` an unsafe trait and document the requirement that the
`WorldQuery` implementation be read-only.
## Migration Guide
`QueryFilter` is now an `unsafe trait`. If you were manually
implementing it, you will need to verify that the `WorldQuery`
implementation is read-only and then add the `unsafe` keyword to the
`impl`.
# Objective
A previous issue describes the same problem: #14248.
This particular link was seemingly missed by #14276.
## Solution
- Search repo for `bevyengine.org/learn/errors/#`
- Remove `#`
- Verify link goes to right place
# Objective
- Crate-level prelude modules, such as `bevy_ecs::prelude`, are plagued
with inconsistency! Let's fix it!
## Solution
Format all preludes based on the following rules:
1. All preludes should have brief documentation in the format of:
> The _name_ prelude.
>
> This includes the most common types in this crate, re-exported for
your convenience.
2. All documentation should be outer, not inner. (`///` instead of
`//!`.)
3. No prelude modules should be annotated with `#[doc(hidden)]`. (Items
within them may, though I'm not sure why this was done.)
## Testing
- I manually searched for the term `mod prelude` and updated all
occurrences by hand. 🫠
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- follow of #14049 ,we could use it on our Parallel Iterator,this pr
also unified the used function in both regular iter and parallel
iterations.
## Performance
no performance regression for regular itertaion
3.5X faster in hybrid parallel iteraion,this number is far greater than
the benefits obtained in regular iteration(~1.81) because mutable
iterations on continuous memory can effectively reduce the cost of
mataining core cache coherence
# Objective
Make the documentation for `SystemParamBuilder` nicer by combining the
tuple implementations into a single line of documentation.
## Solution
Use `#[doc(fake_variadic)]` for `SystemParamBuilder` tuple impls.
(This got missed originally because #14050 and #14703 were open at the
same time.)
# Objective
- Fixes#14974
## Solution
- Replace all* instances of `NonZero*` with `NonZero<*>`
## Testing
- CI passed locally.
---
## Notes
Within the `bevy_reflect` implementations for `std` types,
`impl_reflect_value!()` will continue to use the type aliases instead,
as it inappropriately parses the concrete type parameter as a generic
argument. If the `ZeroablePrimitive` trait was stable, or the macro
could be modified to accept a finite list of types, then we could fully
migrate.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14961
## Solution
- Check that the archetypes don't contain any other observed components
before unsetting their flags
## Testing
- I added a regression test: `observer_despawn_archetype_flags`
# Objective
Allow `SystemParamBuilder` implementations for custom system parameters
created using `#[derive(SystemParam)]`.
## Solution
Extend the derive macro to accept a `#[system_param(builder)]`
attribute. When present, emit a builder type with a field corresponding
to each field of the param.
## Example
```rust
#[derive(SystemParam)]
#[system_param(builder)]
struct CustomParam<'w, 's> {
query: Query<'w, 's, ()>,
local: Local<'s, usize>,
}
let system = (CustomParamBuilder {
local: LocalBuilder(100),
query: QueryParamBuilder::new(|builder| {
builder.with::<A>();
}),
},)
.build_state(&mut world)
.build_system(|param: CustomParam| *param.local + param.query.iter().count());
```
# Objective
- Fixes#14860
## Solution
- Added a line of documentation to `FromWorld`'s trait definition
mention the `Default` blanket implementation.
- Added custom documentation to the `from_world` method for the
`Default` blanket implementation. This ensures when inspecting the
`from_world` function within an IDE, the tooltip will explicitly state
the `default()` method will be used for any `Default` types.
## Testing
- CI passes.
# Objective
When building a system from `SystemParamBuilder`s and defining the
system as a closure, the compiler should be able to infer the parameter
types from the builder types.
## Solution
Create methods for each arity that take an argument that implements both
`SystemParamFunction` as well as `FnMut(SystemParamItem<P>,...)`. The
explicit `FnMut` constraint will allow the compiler to infer the
necessary higher-ranked lifetimes along with the parameter types.
I wanted to show that this was possible, but I can't tell whether it's
worth the complexity. It requires a separate method for each arity,
which pollutes the docs a bit:
## Example
```rust
let system = (LocalBuilder(0u64), ParamBuilder::local::<u64>())
.build_state(&mut world)
.build_system(|a, b| *a + *b + 1);
```
# Objective
sending events tends to be low-frequency so ergonomics can be
prioritized over efficiency.
add `Commands::send_event` to send any type of event without needing a
writer in hand.
i don't know how we feel about these kind of ergonomic things, i add
this to all my projects and find it useful. adding `mut
this_particular_event_writer: EventWriter<ThisParticularEvent>` every
time i want to send something is unnecessarily cumbersome.
it also simplifies the "send and receive in the same system" pattern
significantly.
basic example before:
```rs
fn my_func(
q: Query<(Entity, &State)>,
mut damage_event_writer: EventWriter<DamageEvent>,
mut heal_event_writer: EventWriter<HealEvent>,
) {
for (entity, state) in q.iter() {
if let Some(damage) = state.get_damage() {
damage_event_writer.send(DamageEvent { entity, damage });
}
if let Some(heal) = state.get_heal() {
heal_event_writer.send(HealEvent { entity, heal });
}
}
}
```
basic example after:
```rs
import bevy::ecs::event::SendEventEx;
fn my_func(
mut commands: Commands,
q: Query<(Entity, &State)>,
) {
for (entity, state) in q.iter() {
if let Some(damage) = state.get_damage() {
commands.send_event(DamageEvent { entity, damage });
}
if let Some(heal) = state.get_heal() {
commands.send_event(HealEvent { entity, heal });
}
}
}
```
send/receive in the same system before:
```rs
fn send_and_receive_param_set(
mut param_set: ParamSet<(EventReader<DebugEvent>, EventWriter<DebugEvent>)>,
) {
// We must collect the events to resend, because we can't access the writer while we're iterating over the reader.
let mut events_to_resend = Vec::new();
// This is p0, as the first parameter in the `ParamSet` is the reader.
for event in param_set.p0().read() {
if event.resend_from_param_set {
events_to_resend.push(event.clone());
}
}
// This is p1, as the second parameter in the `ParamSet` is the writer.
for mut event in events_to_resend {
event.times_sent += 1;
param_set.p1().send(event);
}
}
```
after:
```rs
use bevy::ecs::event::SendEventEx;
fn send_via_commands_and_receive(
mut reader: EventReader<DebugEvent>,
mut commands: Commands,
) {
for event in reader.read() {
if event.resend_via_commands {
commands.send_event(DebugEvent {
times_sent: event.times_sent + 1,
..event.clone()
});
}
}
}
```
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
## Introduction
This is the first step in my [Next Generation Scene / UI
Proposal](https://github.com/bevyengine/bevy/discussions/14437).
Fixes https://github.com/bevyengine/bevy/issues/7272#14800.
Bevy's current Bundles as the "unit of construction" hamstring the UI
user experience and have been a pain point in the Bevy ecosystem
generally when composing scenes:
* They are an additional _object defining_ concept, which must be
learned separately from components. Notably, Bundles _are not present at
runtime_, which is confusing and limiting.
* They can completely erase the _defining component_ during Bundle init.
For example, `ButtonBundle { style: Style::default(), ..default() }`
_makes no mention_ of the `Button` component symbol, which is what makes
the Entity a "button"!
* They are not capable of representing "dependency inheritance" without
completely non-viable / ergonomically crushing nested bundles. This
limitation is especially painful in UI scenarios, but it applies to
everything across the board.
* They introduce a bunch of additional nesting when defining scenes,
making them ugly to look at
* They introduce component name "stutter": `SomeBundle { component_name:
ComponentName::new() }`
* They require copious sprinklings of `..default()` when spawning them
in Rust code, due to the additional layer of nesting
**Required Components** solve this by allowing you to define which
components a given component needs, and how to construct those
components when they aren't explicitly provided.
This is what a `ButtonBundle` looks like with Bundles (the current
approach):
```rust
#[derive(Component, Default)]
struct Button;
#[derive(Bundle, Default)]
struct ButtonBundle {
pub button: Button,
pub node: Node,
pub style: Style,
pub interaction: Interaction,
pub focus_policy: FocusPolicy,
pub border_color: BorderColor,
pub border_radius: BorderRadius,
pub image: UiImage,
pub transform: Transform,
pub global_transform: GlobalTransform,
pub visibility: Visibility,
pub inherited_visibility: InheritedVisibility,
pub view_visibility: ViewVisibility,
pub z_index: ZIndex,
}
commands.spawn(ButtonBundle {
style: Style {
width: Val::Px(100.0),
height: Val::Px(50.0),
..default()
},
focus_policy: FocusPolicy::Block,
..default()
})
```
And this is what it looks like with Required Components:
```rust
#[derive(Component)]
#[require(Node, UiImage)]
struct Button;
commands.spawn((
Button,
Style {
width: Val::Px(100.0),
height: Val::Px(50.0),
..default()
},
FocusPolicy::Block,
));
```
With Required Components, we mention only the most relevant components.
Every component required by `Node` (ex: `Style`, `FocusPolicy`, etc) is
automatically brought in!
### Efficiency
1. At insertion/spawn time, Required Components (including recursive
required components) are initialized and inserted _as if they were
manually inserted alongside the given components_. This means that this
is maximally efficient: there are no archetype or table moves.
2. Required components are only initialized and inserted if they were
not manually provided by the developer. For the code example in the
previous section, because `Style` and `FocusPolicy` are inserted
manually, they _will not_ be initialized and inserted as part of the
required components system. Efficient!
3. The "missing required components _and_ constructors needed for an
insertion" are cached in the "archetype graph edge", meaning they aren't
computed per-insertion. When a component is inserted, the "missing
required components" list is iterated (and that graph edge (AddBundle)
is actually already looked up for us during insertion, because we need
that for "normal" insert logic too).
### IDE Integration
The `#[require(SomeComponent)]` macro has been written in such a way
that Rust Analyzer can provide type-inspection-on-hover and `F12` /
go-to-definition for required components.
### Custom Constructors
The `require` syntax expects a `Default` constructor by default, but it
can be overridden with a custom constructor:
```rust
#[derive(Component)]
#[require(
Node,
Style(button_style),
UiImage
)]
struct Button;
fn button_style() -> Style {
Style {
width: Val::Px(100.0),
..default()
}
}
```
### Multiple Inheritance
You may have noticed by now that this behaves a bit like "multiple
inheritance". One of the problems that this presents is that it is
possible to have duplicate requires for a given type at different levels
of the inheritance tree:
```rust
#[derive(Component)
struct X(usize);
#[derive(Component)]
#[require(X(x1))
struct Y;
fn x1() -> X {
X(1)
}
#[derive(Component)]
#[require(
Y,
X(x2),
)]
struct Z;
fn x2() -> X {
X(2)
}
// What version of X is inserted for Z?
commands.spawn(Z);
```
This is allowed (and encouraged), although this doesn't appear to occur
much in practice. First: only one version of `X` is initialized and
inserted for `Z`. In the case above, I think we can all probably agree
that it makes the most sense to use the `x2` constructor for `X`,
because `Y`'s `x1` constructor exists "beneath" `Z` in the inheritance
hierarchy; `Z`'s constructor is "more specific".
The algorithm is simple and predictable:
1. Use all of the constructors (including default constructors) directly
defined in the spawned component's require list
2. In the order the requires are defined in `#[require()]`, recursively
visit the require list of each of the components in the list (this is a
depth Depth First Search). When a constructor is found, it will only be
used if one has not already been found.
From a user perspective, just think about this as the following:
1. Specifying a required component constructor for `Foo` directly on a
spawned component `Bar` will result in that constructor being used (and
overriding existing constructors lower in the inheritance tree). This is
the classic "inheritance override" behavior people expect.
2. For cases where "multiple inheritance" results in constructor
clashes, Components should be listed in "importance order". List a
component earlier in the requirement list to initialize its inheritance
tree earlier.
Required Components _does_ generally result in a model where component
values are decoupled from each other at construction time. Notably, some
existing Bundle patterns use bundle constructors to initialize multiple
components with shared state. I think (in general) moving away from this
is necessary:
1. It allows Required Components (and the Scene system more generally)
to operate according to simple rules
2. The "do arbitrary init value sharing in Bundle constructors" approach
_already_ causes data consistency problems, and those problems would be
exacerbated in the context of a Scene/UI system. For cases where shared
state is truly necessary, I think we are better served by observers /
hooks.
3. If a situation _truly_ needs shared state constructors (which should
be rare / generally discouraged), Bundles are still there if they are
needed.
## Next Steps
* **Require Construct-ed Components**: I have already implemented this
(as defined in the [Next Generation Scene / UI
Proposal](https://github.com/bevyengine/bevy/discussions/14437). However
I've removed `Construct` support from this PR, as that has not landed
yet. Adding this back in requires relatively minimal changes to the
current impl, and can be done as part of a future Construct pr.
* **Port Built-in Bundles to Required Components**: This isn't something
we should do right away. It will require rethinking our public
interfaces, which IMO should be done holistically after the rest of Next
Generation Scene / UI lands. I think we should merge this PR first and
let people experiment _inside their own code with their own Components_
while we wait for the rest of the new scene system to land.
* **_Consider_ Automatic Required Component Removal**: We should
evaluate _if_ automatic Required Component removal should be done. Ex:
if all components that explicitly require a component are removed,
automatically remove that component. This issue has been explicitly
deferred in this PR, as I consider the insertion behavior to be
desirable on its own (and viable on its own). I am also doubtful that we
can find a design that has behavior we actually want. Aka: can we
_really_ distinguish between a component that is "only there because it
was automatically inserted" and "a component that was necessary / should
be kept". See my [discussion response
here](https://github.com/bevyengine/bevy/discussions/14437#discussioncomment-10268668)
for more details.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
- Fixes#14348
- Fixes#14528
- Less complex (but also likely less performant) alternative to #14611
## Solution
- Add a `is_dense` field flag to `QueryIter` indicating whether it is
dense or not, that is whether it can perform dense iteration or not;
- Check this flag any time iteration over a query is performed.
---
It would be nice if someone could try benching this change to see if it
actually matters.
~Note that this not 100% ready for mergin, since there are a bunch of
safety comments on the use of the various `IS_DENSE` for checks that
still need to be updated.~ This is ready modulo benchmarks
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Allow dynamic systems to take lists of system parameters whose length is
not known at compile time.
This can be used for building a system that runs a script defined at
runtime, where the script needs a variable number of query parameters.
It can also be used for building a system that collects a list of
plugins at runtime, and provides a parameter to each one.
This is most useful today with `Vec<Query<FilteredEntityMut>>`. It will
be even more useful with `Vec<DynSystemParam>` if #14817 is merged,
since the parameters in the list can then be of different types.
## Solution
Implement `SystemParam` and `SystemParamBuilder` for `Vec` and
`ParamSet<Vec>`.
## Example
```rust
let system = (vec![
QueryParamBuilder::new_box(|builder| {
builder.with::<B>().without::<C>();
}),
QueryParamBuilder::new_box(|builder| {
builder.with::<C>().without::<B>();
}),
],)
.build_state(&mut world)
.build_system(|params: Vec<Query<&mut A>>| {
let mut count: usize = 0;
params
.into_iter()
.for_each(|mut query| count += query.iter_mut().count());
count
});
```
# Objective
- I needed to run a system whenever a specific condition became true
after being previously false.
- Other users might also need to run a system when a condition changes,
regardless of if it became true or false.
## Solution
- This adds two systems to common_conditions:
- `condition_changed` that changes whenever the inner condition changes
- `condition_became_true` that returns true whenever the inner condition
becomes true after previously being false
## Testing
- I added a doctest for each function
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
Fixes#14883
## Solution
Pretty simple update to `EntityCommands` methods to consume `self` and
return it rather than taking `&mut self`. The things probably worth
noting:
* I added `#[allow(clippy::should_implement_trait)]` to the `add` method
because it causes a linting conflict with `std::ops::Add`.
* `despawn` and `log_components` now return `Self`. I'm not sure if
that's exactly the desired behavior so I'm happy to adjust if that seems
wrong.
## Testing
Tested with `cargo run -p ci`. I think that should be sufficient to call
things good.
## Migration Guide
The most likely migration needed is changing code from this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity.insert(DepthPrepass);
}
if normal_prepass {
entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
to this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity = entity.insert(DepthPrepass);
}
if normal_prepass {
entity = entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity = entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
as can be seen in several of the example code updates here. There will
probably also be instances where mutable `EntityCommands` vars no longer
need to be mutable.
# Objective
I tried writing something like this in my project
```rust
.observe(|e: Trigger<OnAdd, Skeleton>| {
panic!("Skeletoned! {e:?}");
});
```
and it didn't compile.
Having `Debug` trait defined on `Trigger` event will ease debugging the
observers a little bit.
## Solution
Add a bespoke `Debug` implementation when both the bundle and the event
have `Debug` implemented for them.
## Testing
I've added `println!("{trigger:#?}");` to the [observers
example](938d810766/examples/ecs/observers.rs (L124))
and it compiled!
Caveats with this PR are:
- removing this implementation if for any reason we will need it, will
be a breaking change
- the implementation is manually generated, which adds potential toil
when changing the `Trigger` structure
## Showcase
Log output:
```rust
on_add_mine: Trigger {
event: OnAdd,
propagate: false,
trigger: ObserverTrigger {
observer: 2v1#4294967298,
event_type: ComponentId(
0,
),
entity: 454v1#4294967750,
},
_marker: PhantomData<observers::Mine>,
}
```
Thank you for maintaining this engine! 🧡
# Objective
Support building systems with parameters whose types can be determined
at runtime.
## Solution
Create a `DynSystemParam` type that can be built using a
`SystemParamBuilder` of any type and then downcast to the appropriate
type dynamically.
## Example
```rust
let system = (
DynParamBuilder::new(LocalBuilder(3_usize)),
DynParamBuilder:🆕:<Query<()>>(QueryParamBuilder::new(|builder| {
builder.with::<A>();
})),
DynParamBuilder:🆕:<&Entities>(ParamBuilder),
)
.build_state(&mut world)
.build_system(
|mut p0: DynSystemParam, mut p1: DynSystemParam, mut p2: DynSystemParam| {
let local = p0.downcast_mut::<Local<usize>>().unwrap();
let query_count = p1.downcast_mut::<Query<()>>().unwrap();
let entities = p2.downcast_mut::<&Entities>().unwrap();
},
);
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
# Objective
- Fixes#14658.
## Solution
- Added `on_unimplemented` Diagnostic for `IntoObserverSystem` calling
out argument ordering in a `note`
- Added an example to the documentation on `App::observe` to provide
some explanation to users.
## Testing
- Ran CI locally
- Deliberately introduced a parameter order error in the
`ecs/observers.rs` example as a test.
---
## Showcase
<details>
<summary>Error Before</summary>
```
error[E0277]: the trait bound `{closure@examples/ecs/observers.rs:19:13: 22:37}: IntoObserverSystem<_, _, _>` is not satisfied
--> examples/ecs/observers.rs:19:13
|
18 | .observe(
| ------- required by a bound introduced by this call
19 | / |mines: Query<&Mine>,
20 | | trigger: Trigger<ExplodeMines>,
21 | | index: Res<SpatialIndex>,
22 | | mut commands: Commands| {
... |
34 | | }
35 | | },
| |_____________^ the trait `bevy::prelude::IntoSystem<bevy::prelude::Trigger<'static, _, _>, (), _>` is not implemented for closure `{closure@examples/ecs/observers.rs:19:13: 22:37}`, which is required by `{closure@examples/ecs/observers.rs:19:13: 22:37}: IntoObserverSystem<_, _, _>`
|
= note: required for `{closure@examples/ecs/observers.rs:19:13: 22:37}` to implement `IntoObserverSystem<_, _, _>`
note: required by a bound in `bevy::prelude::App::observe`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_app\src\app.rs:995:24
|
993 | pub fn observe<E: Event, B: Bundle, M>(
| ------- required by a bound in this associated function
994 | &mut self,
995 | observer: impl IntoObserverSystem<E, B, M>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ required by this bound in `App::observe`
For more information about this error, try `rustc --explain E0277`.
error: could not compile `bevy` (example "observers") due to 1 previous error
```
</details>
<details>
<summary>Error After</summary>
```
error[E0277]: `{closure@examples/ecs/observers.rs:19:13: 22:37}` cannot become an `ObserverSystem`
--> examples/ecs/observers.rs:19:13
|
18 | .observe(
| ------- required by a bound introduced by this call
19 | / |mines: Query<&Mine>,
20 | | trigger: Trigger<ExplodeMines>,
21 | | index: Res<SpatialIndex>,
22 | | mut commands: Commands| {
... |
34 | | }
35 | | },
| |_____________^ the trait `IntoObserverSystem` is not implemented
|
= help: the trait `bevy::prelude::IntoSystem<bevy::prelude::Trigger<'static, _, _>, (), _>` is not implemented for closure `{closure@examples/ecs/observers.rs:19:13: 22:37}`, which is required by `{closure@examples/ecs/observers.rs:19:13: 22:37}: IntoObserverSystem<_, _, _>`
= note: for function `ObserverSystem`s, ensure the first argument is a `Trigger<T>` and any subsequent ones are `SystemParam`
= note: required for `{closure@examples/ecs/observers.rs:19:13: 22:37}` to implement `IntoObserverSystem<_, _, _>`
note: required by a bound in `bevy::prelude::App::observe`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_app\src\app.rs:1025:24
|
1023 | pub fn observe<E: Event, B: Bundle, M>(
| ------- required by a bound in this associated function
1024 | &mut self,
1025 | observer: impl IntoObserverSystem<E, B, M>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ required by this bound in `App::observe`
For more information about this error, try `rustc --explain E0277`.
error: could not compile `bevy` (example "observers") due to 1 previous error
```
</details>
# Objective
`ParamSetBuilder` is supposed to be used as a tuple constructor, but the
field was not marked `pub` so it's not actually usable outside of its
module.
## Solution
Mark the field `pub`.
Realize one advantage of doc tests over unit tests is that they test the
public API.
Add a doc test example that uses the field so that this would have been
caught.
Closes#14836.
`filter_map_unchanged` optionally maps to an inner value by applying a
function to the contained reference. This is useful in a situation where
you need to convert a `Mut<T>` to a `Mut<U>`, but only if `T` contains
`U`.
---------
Co-authored-by: Chris Russell <8494645+chescock@users.noreply.github.com>
# Objective
Fixes#14782
## Solution
Enable the lint and fix all upcoming hints (`--fix`). Also tried to
figure out the false-positive (see review comment). Maybe split this PR
up into multiple parts where only the last one enables the lint, so some
can already be merged resulting in less many files touched / less
potential for merge conflicts?
Currently, there are some cases where it might be easier to read the
code with the qualifier, so perhaps remove the import of it and adapt
its cases? In the current stage it's just a plain adoption of the
suggestions in order to have a base to discuss.
## Testing
`cargo clippy` and `cargo run -p ci` are happy.
# Objective
When reading the ECS code it is sometimes confusing to understand why we
have 2 accesses, one of ComponentId and one of ArchetypeComponentId
## Solution
Make the usage of these 2 accesses more explicit
---------
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
Fixes Commands not being `Send` or `Sync` anymore in 0.14 by
implementing `Send` and `Sync` for `RawCommandQueue`.
## Solution
Reference discussion in
[discord](https://discord.com/channels/691052431525675048/691052431974465548/1259464518539411570).
It seems that in https://github.com/bevyengine/bevy/pull/13249, when
adding a `RawCommandQueue` variant to the `InternalQueue`, the `Send /
Sync` traits were not implemented for it, which bubbled up all the way
to `Commands` not being `Send / Sync` anymore.
I am not very familiar with the ECS internals so I can't say whether the
`RawCommandQueue` is safe to be shared between threads, but I know for
sure that before the linked PR `Commands` were indeed `Send` and `Sync`
so that PR broke "some workflows" (mandatory
[xkcd](https://xkcd.com/1172/)).
## Testing
This PR itself includes a compile test to make sure `Commands` will
implement `Send` and `Sync`. The test itself fails without the
implementation and succeeds with it.
Furthermore, if I cherry pick the test to a previous release (i.e. 0.13)
it indeed succeeds, showing that this is a regression specific to 0.14.
---------
Signed-off-by: Luca Della Vedova <lucadv@intrinsic.ai>
# Objective
Fix#14771 by adding a `try_insert_if_new` method to the
`EntityCommands`
## Solution
This simply calls the `try_insert` function with `InsertMode::Keep`
## Testing
I did not add any test because `EntityCommands::try_insert` does not
seem to be tested either. I can add some if needed.
# Objective
Often there are reasons to insert some components (e.g. Transform)
separately from the rest of a bundle (e.g. PbrBundle). However `insert`
overwrites existing components, making this difficult.
See also issue #14397Fixes#2054.
## Solution
This PR adds the method `insert_if_new` to EntityMut and Commands, which
is the same as `insert` except that the old component is kept in case of
conflicts.
It also renames some internal enums (from `ComponentStatus::Mutated` to
`Existing`), to reflect the possible change in meaning.
## Testing
*Did you test these changes? If so, how?*
Added basic unit tests; used the new behavior in my project.
*Are there any parts that need more testing?*
There should be a test that the change time isn't set if a component is
not overwritten; I wasn't sure how to write a test for that case.
*How can other people (reviewers) test your changes? Is there anything
specific they need to know?*
`cargo test` in the bevy_ecs project.
*If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?*
Only tested on Windows, but it doesn't touch anything platform-specific.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
# Objective
- Sometimes some method or function takes an owned `Query`, but we don't
want to give up ours;
- transmuting it technically a solution, but it more costly than
necessary.
- Make query iterators more flexible
- this would allow the equivalent of
`slice::split_first`/`slice::split_first_mut` for query iterators
- helps with requests like #14685
## Solution
- Add a way for reborrowing queries, that is going from a `&'a mut
Query<'w, 's, D, F>` to a `Query<'a, 's, D, F>`:
- this is safe because the original query will be borrowed while the new
query exists and thus no aliased access can happen;
- it's basically the equivalent of going from `&'short mut &'long mut T`
to `&'short mut T` the the compiler automatically implements.
- Add a way for getting the remainder of a query iterator:
- this is interesting also because the original iterator keeps its
position, which was not possible before;
- this in turn requires a way to reborrow query fetches, which I had to
add to `WorldQuery`.
## Showcase
- You can now reborrow a `Query`, getting an equivalent `Query` with a
shorter lifetime. Previously this was possible for read-only queries by
using `Query::to_readonly`, now it's possible for mutable queries too;
- You can now separately iterate over the remainder of `QueryIter`.
## Migration Guide
- `WorldQuery` now has an additional `shrink_fetch` method you have to
implement if you were implementing `WorldQuery` manually.
# Objective
`Res` and `ResMut` perform redundant lookups of the resource storage,
first to initialize the `ArchetypeComponentId` and then to retrieve it.
## Solution
Use the `archetype_component_id` returned from
`initialize_resource_internal` to avoid an extra lookup and `unwrap()`.
# Objective
The code to create `ReflectComponent` and `ReflectResource` instances
manually constructs a `Mut<dyn Reflect>` by copying everything but
`value`. That can be done more concisely and better respecting
encapsulation by calling the `map_unchanged()` method.
## Solution
Use `map_unchanged` instead of creating a `Mut` manually.
---------
Co-authored-by: radiish <cb.setho@gmail.com>
# Objective
As is, calling
[`DeferredWorld::query`](https://docs.rs/bevy/latest/bevy/ecs/world/struct.DeferredWorld.html#method.query)
requires you to first `reborrow()` the world in order to use it at all.
Simple reproduction:
```rust
fn test<'w>(mut world: DeferredWorld<'w>, mut state: QueryState<(), ()>) {
let query = world.query(&mut state);
// let query = world.reborrow().query(&mut state); // << Required
}
```
Error message:
```
error[E0597]: `world` does not live long enough
|
444 | fn test<'w>(mut world: DeferredWorld<'w>, mut state: QueryState<(), ()>) {
| -- --------- binding `world` declared here
| |
| lifetime `'w` defined here
445 | let query = world.query(&mut state);
| ^^^^^------------------
| |
| borrowed value does not live long enough
| argument requires that `world` is borrowed for `'w`
446 | }
| - `world` dropped here while still borrowed
```
## Solution
Fix the world borrow lifetime on the `query` method, which now correctly
allows the above usage.
# Objective
- Fixes#14697
## Solution
This PR modifies the existing `all_tuples!` macro to optionally accept a
`#[doc(fake_variadic)]` attribute in its input. If the attribute is
present, each invocation of the impl macro gets the correct attributes
(i.e. the first impl receives `#[doc(fake_variadic)]` while the other
impls are hidden using `#[doc(hidden)]`.
Impls for the empty tuple (unit type) are left untouched (that's what
the [standard
library](https://doc.rust-lang.org/std/cmp/trait.PartialEq.html#impl-PartialEq-for-())
and
[serde](https://docs.rs/serde/latest/serde/trait.Serialize.html#impl-Serialize-for-())
do).
To work around https://github.com/rust-lang/cargo/issues/8811 and to get
impls on re-exports to correctly show up as variadic, `--cfg docsrs_dep`
is passed when building the docs for the toplevel `bevy` crate.
`#[doc(fake_variadic)]` only works on tuples and fn pointers, so impls
for structs like `AnyOf<(T1, T2, ..., Tn)>` are unchanged.
## Testing
I built the docs locally using `RUSTDOCFLAGS='--cfg docsrs'
RUSTFLAGS='--cfg docsrs_dep' cargo +nightly doc --no-deps --workspace`
and checked the documentation page of a trait both in its original crate
and the re-exported version in `bevy`.
The description should correctly mention for how many tuple items the
trait is implemented.
I added `rustc-args` for docs.rs to the `bevy` crate, I hope there
aren't any other notable crates that re-export `#[doc(fake_variadic)]`
traits.
---
## Showcase
`bevy_ecs::query::QueryData`:
<img width="1015" alt="Screenshot 2024-08-12 at 16 41 28"
src="https://github.com/user-attachments/assets/d40136ed-6731-475f-91a0-9df255cd24e3">
`bevy::ecs::query::QueryData` (re-export):
<img width="1005" alt="Screenshot 2024-08-12 at 16 42 57"
src="https://github.com/user-attachments/assets/71d44cf0-0ab0-48b0-9a51-5ce332594e12">
## Original Description
<details>
Resolves#14697
Submitting as a draft for now, very WIP.
Unfortunately, the docs don't show the variadics nicely when looking at
reexported items.
For example:
`bevy_ecs::bundle::Bundle` correctly shows the variadic impl:
while `bevy::ecs::bundle::Bundle` (the reexport) shows all the impls
(not good):
Built using `RUSTDOCFLAGS='--cfg docsrs' cargo +nightly doc --workspace
--no-deps` (`--no-deps` because of wgpu-core).
Maybe I missed something or this is a limitation in the *totally not
private* `#[doc(fake_variadic)]` thingy. In any case I desperately need
some sleep now :))
</details>
# Objective
- Implements the [Unique Reflect
RFC](https://github.com/nicopap/rfcs/blob/bevy-reflect-api/rfcs/56-better-reflect.md).
## Solution
- Implements the RFC.
- This implementation differs in some ways from the RFC:
- In the RFC, it was suggested `Reflect: Any` but `PartialReflect:
?Any`. During initial implementation I tried this, but we assume the
`PartialReflect: 'static` in a lot of places and the changes required
crept out of the scope of this PR.
- `PartialReflect::try_into_reflect` originally returned `Option<Box<dyn
Reflect>>` but i changed this to `Result<Box<dyn Reflect>, Box<dyn
PartialReflect>>` since the method takes by value and otherwise there
would be no way to recover the type. `as_full` and `as_full_mut` both
still return `Option<&(mut) dyn Reflect>`.
---
## Changelog
- Added `PartialReflect`.
- `Reflect` is now a subtrait of `PartialReflect`.
- Moved most methods on `Reflect` to the new `PartialReflect`.
- Added `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect}`.
- Added `PartialReflect::{try_as_reflect, try_as_reflect_mut,
try_into_reflect}`.
- Added `<dyn PartialReflect>::{try_downcast_ref, try_downcast_mut,
try_downcast, try_take}` supplementing the methods on `dyn Reflect`.
## Migration Guide
- Most instances of `dyn Reflect` should be changed to `dyn
PartialReflect` which is less restrictive, however trait bounds should
generally stay as `T: Reflect`.
- The new `PartialReflect::{as_partial_reflect, as_partial_reflect_mut,
into_partial_reflect, try_as_reflect, try_as_reflect_mut,
try_into_reflect}` methods as well as `Reflect::{as_reflect,
as_reflect_mut, into_reflect}` will need to be implemented for manual
implementors of `Reflect`.
## Future Work
- This PR is designed to be followed up by another "Unique Reflect Phase
2" that addresses the following points:
- Investigate making serialization revolve around `Reflect` instead of
`PartialReflect`.
- [Remove the `try_*` methods on `dyn PartialReflect` since they are
stop
gaps](https://github.com/bevyengine/bevy/pull/7207#discussion_r1083476050).
- Investigate usages like `ReflectComponent`. In the places they
currently use `PartialReflect`, should they be changed to use `Reflect`?
- Merging this opens the door to lots of reflection features we haven't
been able to implement.
- We could re-add [the `Reflectable`
trait](8e3488c880/crates/bevy_reflect/src/reflect.rs (L337-L342))
and make `FromReflect` a requirement to improve [`FromReflect`
ergonomics](https://github.com/bevyengine/rfcs/pull/59). This is
currently not possible because dynamic types cannot sensibly be
`FromReflect`.
- Since this is an alternative to #5772, #5781 would be made cleaner.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Enables writing queries like `Query<Entity, With<SystemIdMarker>>` to
filter `Entity`s that are, or are not (with `Without`), `SystemId`s.
## Solution
Simple unit struct `SystemIdMarker` added during
`World::register_boxed_system`; `World::remove_system` already despawns
the entity, removing the marker.
## Testing
No tests, but happy to write some with direction.
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
~~Enables writing queries like `Query<Entity, With<ObserverMarker>>` to
filter `Entity`s that are, or are not (with `Without`), `Observer`s.~~
~~`Observer` version of [similar
PR](https://github.com/bevyengine/bevy/pull/14584) for `SystemId`s.~~
just adding a line to the docs :)
## Solution
~~Simple unit struct `ObserverMarker` added in `Observer`'s `.on_add`
component hook.~~
## Testing
No tests, but happy to write some with direction.
# Objective
Support more kinds of system params in buildable systems, such as a
`ParamSet` or `Vec` containing buildable params or tuples of buildable
params.
## Solution
Replace the `BuildableSystemParam` trait with `SystemParamBuilder` to
make it easier to compose builders. Provide implementations for existing
buildable params, plus tuples, `ParamSet`, and `Vec`.
## Examples
```rust
// ParamSet of tuple:
let system = (ParamSetBuilder((
QueryParamBuilder::new(|builder| { builder.with::<B>(); }),
QueryParamBuilder::new(|builder| { builder.with::<C>(); }),
)),)
.build_state(&mut world)
.build_system(|mut params: ParamSet<(Query<&mut A>, Query<&mut A>)>| {
params.p0().iter().count() + params.p1().iter().count()
});
// ParamSet of Vec:
let system = (ParamSetBuilder(vec![
QueryParamBuilder::new_box(|builder| { builder.with::<B>(); }),
QueryParamBuilder::new_box(|builder| { builder.with::<C>(); }),
]),)
.build_state(&mut world)
.build_system(|mut params: ParamSet<Vec<Query<&mut A>>>| {
let mut count = 0;
params.for_each(|mut query| count += query.iter_mut().count());
count
});
```
## Migration Guide
The API for `SystemBuilder` has changed. Instead of constructing a
builder with a world and then adding params, you first create a tuple of
param builders and then supply the world.
```rust
// Before
let system = SystemBuilder::<()>::new(&mut world)
.local::<u64>()
.builder::<Local<u64>>(|x| *x = 10)
.builder::<Query<&A>>(|builder| { builder.with::<B>(); })
.build(system);
// After
let system = (
ParamBuilder,
LocalBuilder(10),
QueryParamBuilder::new(|builder| { builder.with::<B>(); }),
)
.build_state(&mut world)
.build_system(system);
```
## Possible Future Work
Here are a few possible follow-up changes. I coded them up to prove that
this API can support them, but they aren't necessary for this PR.
* chescock/bevy#1
* chescock/bevy#2
* chescock/bevy#3
# Objective
- fix#14679
- bevy's performance highly depends on compiler optimization,inline hot
function could greatly help compiler to optimize our program
# Objective
- after #14502 ,explicit using clone_from should has better performance
because it could reuse the resources to avoid unnecessary allocations.
# Objective
- While developing a debug tool I saw the gap where it was not possible
to get all existing states from a World using reflection.
- This PR allows to iterate over all `States` types that exist in a
world, and modify them in case they implement `FreelyMutableState`.
- Two new methods are available on `App` and `SubApp` as helper to
register the data types:
- `register_state_reflect` and `register_mutable_state_reflect`
## Solution
- Two new data types are added:
- `ReflectState`: Allows to extract the current value of a state from
the World.
- `ReflectFreelyMutableState`: Allows to set the next state in a world,
similar to call `NextState::set`.
- There is no distinction between `States`, `SubStates` and
`ComputedStates`:
- `States` can register both `ReflectState` and
`ReflectFreelyMutableState`.
- `SubStates` can register both `ReflectState` and
`ReflectFreelyMutableState`.
- `ComputedStates` can register only `ReflectState` .
## Testing
- Added tests inside the `bevy_state` crate.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- I made a mistake when fixing the merge conflicts here:
https://github.com/bevyengine/bevy/pull/14579#discussion_r1705377452
It wasn't caught because there's no easy way to trigger access conflicts
with resources without triggering them with components first.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14575
- There is a soundness issue because we use `conflicts()` to check for
system ambiguities + soundness issues. However since the current
conflicts is a `Vec<T>`, we cannot express conflicts where there is no
specific `ComponentId` at fault. For example `q1: Query<EntityMut>, q2:
Query<EntityMut>`
There was a TODO to handle the `write_all` case but it was never
resolved
## Solution
- Introduce an `AccessConflict` enum that is either a list of specific
ids that are conflicting or `All` if all component ids are conflicting
## Testing
- Introduced a new unit test to check for the `EntityMut` case
## Migration guide
The `get_conflicts` method of `Access` now returns an `AccessConflict`
enum instead of simply a `Vec` of `ComponentId`s that are causing the
access conflict. This can be useful in cases where there are no
particular `ComponentId`s conflicting, but instead **all** of them are;
for example `fn system(q1: Query<EntityMut>, q2: Query<EntityRef>)`
# Objective
- Fixes#14337
## Solution
- Add a `cfg_attr` that derives `Refect` for this type.
## Testing
- I am going to make sure the tests pass on this PR before requesting
review, If more testing is necessary let me know some good action steps
to take.
# Objective
#13152 added support for reflecting functions. Now, we need a way to
register those functions such that they may be accessed anywhere within
the ECS.
## Solution
Added a `FunctionRegistry` type similar to `TypeRegistry`.
This allows a function to be registered and retrieved by name.
```rust
fn foo() -> i32 {
123
}
let mut registry = FunctionRegistry::default();
registry.register("my_function", foo);
let function = registry.get_mut("my_function").unwrap();
let value = function.call(ArgList::new()).unwrap().unwrap_owned();
assert_eq!(value.downcast_ref::<i32>(), Some(&123));
```
Additionally, I added an `AppFunctionRegistry` resource which wraps a
`FunctionRegistryArc`. Functions can be registered into this resource
using `App::register_function` or by getting a mutable reference to the
resource itself.
### Limitations
#### `Send + Sync`
In order to get this registry to work across threads, it needs to be
`Send + Sync`. This means that `DynamicFunction` needs to be `Send +
Sync`, which means that its internal function also needs to be `Send +
Sync`.
In most cases, this won't be an issue because standard Rust functions
(the type most likely to be registered) are always `Send + Sync`.
Additionally, closures tend to be `Send + Sync` as well, granted they
don't capture any `!Send` or `!Sync` variables.
This PR adds this `Send + Sync` requirement, but as mentioned above, it
hopefully shouldn't be too big of an issue.
#### Closures
Unfortunately, closures can't be registered yet. This will likely be
explored and added in a followup PR.
### Future Work
Besides addressing the limitations listed above, another thing we could
look into is improving the lookup of registered functions. One aspect is
in the performance of hashing strings. The other is in the developer
experience of having to call `std::any::type_name_of_val` to get the
name of their function (assuming they didn't give it a custom name).
## Testing
You can run the tests locally with:
```
cargo test --package bevy_reflect
```
---
## Changelog
- Added `FunctionRegistry`
- Added `AppFunctionRegistry` (a `Resource` available from `bevy_ecs`)
- Added `FunctionRegistryArc`
- Added `FunctionRegistrationError`
- Added `reflect_functions` feature to `bevy_ecs` and `bevy_app`
- `FunctionInfo` is no longer `Default`
- `DynamicFunction` now requires its wrapped function be `Send + Sync`
## Internal Migration Guide
> [!important]
> Function reflection was introduced as part of the 0.15 dev cycle. This
migration guide was written for developers relying on `main` during this
cycle, and is not a breaking change coming from 0.14.
`DynamicFunction` (both those created manually and those created with
`IntoFunction`), now require `Send + Sync`. All standard Rust functions
should meet that requirement. Closures, on the other hand, may not if
they capture any `!Send` or `!Sync` variables from its environment.
# Objective
To implement relations we will need to add a `ComponentIndex`, which is
a map from a Component to the list of archetypes that contain this
component.
One of the reasons is that with fragmenting relations the number of
archetypes will explode, so it will become inefficient to create and
update the query caches by iterating through the list of all archetypes.
In this PR, we introduce the `ComponentIndex`, and we update the
`QueryState` to make use of it:
- if a query has at least 1 required component (i.e. something other
than `()`, `Entity` or `Option<>`, etc.): for each of the required
components we find the list of archetypes that contain it (using the
ComponentIndex). Then, we select the smallest list among these. This
gives a small subset of archetypes to iterate through compared with
iterating through all new archetypes
- if it doesn't, then we keep using the current approach of iterating
through all new archetypes
# Implementation
- This breaks query iteration order, in the sense that we are not
guaranteed anymore to return results in the order in which the
archetypes were created. I think this should be fine because this wasn't
an explicit bevy guarantee so users should not be relying on this. I
updated a bunch of unit tests that were failing because of this.
- I had an issue with the borrow checker because iterating the list of
potential archetypes requires access to `&state.component_access`, which
was conflicting with the calls to
```
if state.new_archetype_internal(archetype) {
state.update_archetype_component_access(archetype, access);
}
```
which need a mutable access to the state.
The solution I chose was to introduce a `QueryStateView` which is a
temporary view into the `QueryState` which enables a "split-borrows"
kind of approach. It is described in detail in this blog post:
https://smallcultfollowing.com/babysteps/blog/2018/11/01/after-nll-interprocedural-conflicts/
# Test
The unit tests pass.
Benchmark results:
```
❯ critcmp main pr
group main pr
----- ---- --
iter_fragmented/base 1.00 342.2±25.45ns ? ?/sec 1.02 347.5±16.24ns ? ?/sec
iter_fragmented/foreach 1.04 165.4±11.29ns ? ?/sec 1.00 159.5±4.27ns ? ?/sec
iter_fragmented/foreach_wide 1.03 3.3±0.04µs ? ?/sec 1.00 3.2±0.06µs ? ?/sec
iter_fragmented/wide 1.03 3.1±0.06µs ? ?/sec 1.00 3.0±0.08µs ? ?/sec
iter_fragmented_sparse/base 1.00 6.5±0.14ns ? ?/sec 1.02 6.6±0.08ns ? ?/sec
iter_fragmented_sparse/foreach 1.00 6.3±0.08ns ? ?/sec 1.04 6.6±0.08ns ? ?/sec
iter_fragmented_sparse/foreach_wide 1.00 43.8±0.15ns ? ?/sec 1.02 44.6±0.53ns ? ?/sec
iter_fragmented_sparse/wide 1.00 29.8±0.44ns ? ?/sec 1.00 29.8±0.26ns ? ?/sec
iter_simple/base 1.00 8.2±0.10µs ? ?/sec 1.00 8.2±0.09µs ? ?/sec
iter_simple/foreach 1.00 3.8±0.02µs ? ?/sec 1.02 3.9±0.03µs ? ?/sec
iter_simple/foreach_sparse_set 1.00 19.0±0.26µs ? ?/sec 1.01 19.3±0.16µs ? ?/sec
iter_simple/foreach_wide 1.00 17.8±0.24µs ? ?/sec 1.00 17.9±0.31µs ? ?/sec
iter_simple/foreach_wide_sparse_set 1.06 95.6±6.23µs ? ?/sec 1.00 90.6±0.59µs ? ?/sec
iter_simple/sparse_set 1.00 19.3±1.63µs ? ?/sec 1.01 19.5±0.29µs ? ?/sec
iter_simple/system 1.00 8.1±0.10µs ? ?/sec 1.00 8.1±0.09µs ? ?/sec
iter_simple/wide 1.05 37.7±2.53µs ? ?/sec 1.00 35.8±0.57µs ? ?/sec
iter_simple/wide_sparse_set 1.00 95.7±1.62µs ? ?/sec 1.00 95.9±0.76µs ? ?/sec
par_iter_simple/with_0_fragment 1.04 35.0±2.51µs ? ?/sec 1.00 33.7±0.49µs ? ?/sec
par_iter_simple/with_1000_fragment 1.00 50.4±2.52µs ? ?/sec 1.01 51.0±3.84µs ? ?/sec
par_iter_simple/with_100_fragment 1.02 40.3±2.23µs ? ?/sec 1.00 39.5±1.32µs ? ?/sec
par_iter_simple/with_10_fragment 1.14 38.8±7.79µs ? ?/sec 1.00 34.0±0.78µs ? ?/sec
```
# Objective
- Fix#14629
## Solution
- Make `QueryState::transmute`, `QueryState::transmute_filtered`,
`QueryState::join` and `QueryState::join_filtered` take a `impl
Into<UnsafeWorldCell>` instead of a `&Components` and validate their
`WorldId`
## Migration Guide
- `QueryState::transmute`, `QueryState::transmute_filtered`,
`QueryState::join` and `QueryState::join_filtered` now take a `impl
Into<UnsafeWorldCell>` instead of a `&Components`
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- currently, bevy employs sparse iteration if any of the target
components in the query are stored in a sparse set. it may lead to
increased cache misses in some cases, potentially impacting performance.
- partial fixes#12381
## Solution
- use dense iteration when an archetype and its table have the same
entity count.
- to avoid introducing complicate unsafe noise, this pr only implement
for `for_each ` style iteration.
- added a benchmark to test performance for hybrid iteration.
## Performance
nearly 2x win in specific scenarios, and no performance degradation in
other test cases.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
B0003 indicates that you tried to act upon a nonexistant entity, but
does not mention where the error occured:
```
2024-07-31T15:46:25.954840Z WARN bevy_ecs::world: error[B0003]: Could not despawn entity Entity { index: 4294967295, generation: 1 } because it doesn't exist in this World. See: https://bevyengine.org/learn/errors/b0003
```
## Solution
Include caller location:
```
2024-07-31T15:46:25.954840Z WARN bevy_ecs::world: error[B0003]: src/main.rs:18:11: Could not despawn entity Entity { index: 4294967295, generation: 1 } because it doesn't exist in this World. See: https://bevyengine.org/learn/errors/b0003
```
Open question: What should the exact message format be?
## Testing
None, this doesn't change any logic.
# Objective
Fixes#12139
## Solution
See this comment on original issue for my proposal:
https://github.com/bevyengine/bevy/issues/12139#issuecomment-2241915791
This PR is an implementation of this proposal.
I modified the implementation of `fmt::Debug` to instead display
`0v0#12345` to ensure entity index, generation, and raw bits are all
present in the output for debug purposes while still keeping log message
concise.
`fmt::Display` remains as is (`0v0`) to offer an even shorter output.
To me, this is the most non-intrusive fix for this issue.
## Testing
Add `fn entity_debug` test
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Fixes#14517.
## Solution
- Replace two instances of `map()` with `inspect()`.
- `#[allow(dead_code)]` on `Bundle` derive macro tests.
## Testing
You need to install the beta toolchain, since these lints are not stable
yet.
```bash
cargo +beta clippy --workspace
cargo +beta test --workspace
```
# Objective
- Make it possible to know *what* changed your component or resource.
- Common need when debugging, when you want to know the last code
location that mutated a value in the ECS.
- This feature would be very useful for the editor alongside system
stepping.
## Solution
- Adds the caller location to column data.
- Mutations now `track_caller` all the way up to the public API.
- Commands that invoke these functions immediately call
`Location::caller`, and pass this into the functions, instead of the
functions themselves attempting to get the caller. This would not work
for commands which are deferred, as the commands are executed by the
scheduler, not the user's code.
## Testing
- The `component_change_detection` example now shows where the component
was mutated:
```
2024-07-28T06:57:48.946022Z INFO component_change_detection: Entity { index: 1, generation: 1 }: New value: MyComponent(0.0)
2024-07-28T06:57:49.004371Z INFO component_change_detection: Entity { index: 1, generation: 1 }: New value: MyComponent(1.0)
2024-07-28T06:57:49.012738Z WARN component_change_detection: Change detected!
-> value: Ref(MyComponent(1.0))
-> added: false
-> changed: true
-> changed by: examples/ecs/component_change_detection.rs:36:23
```
- It's also possible to inspect change location from a debugger:
<img width="608" alt="image"
src="https://github.com/user-attachments/assets/c90ecc7a-0462-457a-80ae-42e7f5d346b4">
---
## Changelog
- Added source locations to ECS change detection behind the
`track_change_detection` flag.
## Migration Guide
- Added `changed_by` field to many internal ECS functions used with
change detection when the `track_change_detection` feature flag is
enabled. Use Location::caller() to provide the source of the function
call.
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Optimize the cloning process for Access-related structs in the ECS
system, specifically targeting the `clone_from` method.
Previously, profiling showed that 1% of CPU time was spent in
`FixedBitSet`'s `drop_in_place`, due to the default `clone_from`
implementation:
```rust
fn clone_from(&mut self, source: &Self) {
*self = source.clone()
}
```
This implementation causes unnecessary allocations and deallocations.
However, [FixedBitSet provides a more optimized clone_from
method](https://github.com/petgraph/fixedbitset/blob/master/src/lib.rs#L1445-L1465)
that avoids these allocations and utilizes SIMD instructions for better
performance.
This PR aims to leverage the optimized clone_from method of FixedBitSet
and implement custom clone_from methods for Access-related structs to
take full advantage of this optimization. By doing so, we expect to
significantly reduce CPU time spent on cloning operations and improve
overall system performance.
## Solution
- Implemented custom `clone` and `clone_from` methods for `Access`,
`FilteredAccess`, `AccessFilters`, and `FilteredAccessSet` structs.
- Removed `#[derive(Clone)]` and manually implemented `Clone` trait to
use optimized `clone_from` method from `FixedBitSet`.
- Added unit tests for cloning and `clone_from` methods to ensure
correctness.
## Testing
- Conducted performance testing comparing the original and optimized
versions.
- Measured CPU time consumption for the `clone_from` method:
- Original version: 1.34% of CPU time
- Optimized version: 0.338% of CPU time
- Compared FPS before and after the changes (results may vary depending
on the run):
Before optimization:
```
2024-07-28T12:49:11.864019Z INFO bevy diagnostic: fps : 213.489463 (avg 214.502488)
2024-07-28T12:49:11.864037Z INFO bevy diagnostic: frame_time : 4.704746ms (avg 4.682251ms)
2024-07-28T12:49:11.864042Z INFO bevy diagnostic: frame_count: 7947.000000 (avg 7887.500000)
```
After optimization:
```
2024-07-28T12:29:42.705738Z INFO bevy diagnostic: fps : 220.273721 (avg 220.912227)
2024-07-28T12:29:42.705762Z INFO bevy diagnostic: frame_time : 4.559127ms (avg 4.544905ms)
2024-07-28T12:29:42.705769Z INFO bevy diagnostic: frame_count: 7596.000000 (avg 7536.500000)
```
---
Reviewers can test these changes by running `cargo run --release
--example ssr`
# Objective
- The implementation of `update_component_access` for `AnyOf`/`Or` is
kinda weird due to special casing the first filter, let's simplify it;
- Fundamentally we want to fold/reduce the various filters using an OR
operation, however in order to do a proper fold we need a neutral
element for the initial accumulator, which for OR is FALSE. However we
didn't have a way to create a `FilteredAccess` value corresponding to
FALSE and thus the only option was reducing, which special cases the
first element as being the initial accumulator.
This is an alternative to https://github.com/bevyengine/bevy/pull/14026
## Solution
- Introduce `FilteredAccess::empty` as a way to create a
`FilteredAccess` corresponding to the logical proposition FALSE;
- Use it as the initial accumulator for the above operations, allowing
to handle all the elements to fold in the same way.
---
## Migration Guide
- The behaviour of `AnyOf<()>` and `Or<()>` has been changed to match no
archetypes rather than all archetypes to naturally match the
corresponding logical operation. Consider replacing them with `()`
instead.
# Objective
- `SystemId`'s `Debug` implementation includes its `entity` field twice.
- This was likely an oversight in #11019, since before that PR the
second field was the `PhantomData` one.
## Solution
- Only include it once
Alternatively, this could be changed to match the struct representation
of `SystemId`, thus instructing the formatter to print a named struct
and including the `PhantomData` field.
# Objective
When using observers you might want to know what the difference is
between `OnAdd` vs `OnReplace` vs `OnInsert` etc. It's not obvious where
to look (`component_hooks.rs`). Added intradoc links for easier
disambiguation.
# Objective
The method `World::increment_change_tick` currently takes `&self` as the
method receiver, which is semantically strange. Even though the interior
mutability is sound, the existence of this method is strange since we
tend to think of `&World` as being a read-only snapshot of a world, not
an aliasable reference to a world with mutability. For those purposes,
we have `UnsafeWorldCell`.
## Solution
Change the method signature to take `&mut self`. Use exclusive access to
remove the need for atomic adds, which makes the method slightly more
efficient. Redirect users to [`UnsafeWorldCell::increment_change_tick`]
if they need to increment the world's change tick from an aliased
context.
In practice I don't think there will be many breakages, if any. In cases
where you need to call `increment_change_tick`, you usually already have
either `&mut World` or `UnsafeWorldCell`.
---
## Migration Guide
The method `World::increment_change_tick` now requires `&mut self`
instead of `&self`. If you need to call this method but do not have
mutable access to the world, consider using
`world.as_unsafe_world_cell_readonly().increment_change_tick()`, which
does the same thing, but is less efficient than the method on `World`
due to requiring atomic synchronization.
```rust
fn my_system(world: &World) {
// Before
world.increment_change_tick();
// After
world.as_unsafe_world_cell_readonly().increment_change_tick();
}
```
# Objective
Sometimes one wants to retrieve a `&dyn Reflect` for an entity's
component, which so far required multiple, non-obvious steps and
`unsafe`-code.
The docs for
[`MutUntyped`](https://docs.rs/bevy/latest/bevy/ecs/change_detection/struct.MutUntyped.html#method.map_unchanged)
contain an example of the unsafe part.
## Solution
This PR adds the two methods:
```rust
// immutable variant
World::get_reflect(&self, entity: Entity, type_id: TypeId) -> Result<&dyn Reflect, GetComponentReflectError>
// mutable variant
World::get_reflect_mut(&mut self, entity: Entity, type_id: TypeId) -> Result<Mut<'_, dyn Reflect>, GetComponentReflectError>
```
which take care of the necessary steps, check required invariants etc.,
and contain the unsafety so the caller doesn't have to deal with it.
## Testing
- Did you test these changes? If so, how?
- Added tests and a doc test, also (successfully) ran `cargo run -p ci`.
- Are there any parts that need more testing?
- Could add tests for each individual error variant, but it's not
required imo.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run `cargo test --doc --package bevy_ecs --all-features --
world::World::get_reflect --show-output` for the doctest
- Run `cargo test --package bevy_ecs --lib --all-features --
world::tests::reflect_tests --show-output` for the unittests
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- Don't think it's relevant, but tested on 64bit linux (only).
---
## Showcase
Copy of the doctest example which gives a good overview of what this
enables:
```rust
use bevy_ecs::prelude::*;
use bevy_reflect::Reflect;
use std::any::TypeId;
// define a `Component` and derive `Reflect` for it
#[derive(Component, Reflect)]
struct MyComponent;
// create a `World` for this example
let mut world = World::new();
// Note: This is usually handled by `App::register_type()`, but this example can not use `App`.
world.init_resource::<AppTypeRegistry>();
world.get_resource_mut::<AppTypeRegistry>().unwrap().write().register::<MyComponent>();
// spawn an entity with a `MyComponent`
let entity = world.spawn(MyComponent).id();
// retrieve a reflected reference to the entity's `MyComponent`
let comp_reflected: &dyn Reflect = world.get_reflect(entity, TypeId::of::<MyComponent>()).unwrap();
// make sure we got the expected type
assert!(comp_reflected.is::<MyComponent>());
```
## Migration Guide
No breaking changes, but users can use the new methods if they did it
manually before.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Simplify Bevy-provided functions that return a condition-satisfying
closure instead of just being the condition.
## Solution
Become the condition.
## Testing
I did not test. Game jamming. Hopefully CI passes.
---
## Migration Guide
Some run conditions have been simplified.
```rust
// Before:
app.add_systems(Update, (
system_0.run_if(run_once()),
system_1.run_if(resource_changed_or_removed::<T>()),
system_2.run_if(resource_removed::<T>()),
system_3.run_if(on_event::<T>()),
system_4.run_if(any_component_removed::<T>()),
));
// After:
app.add_systems(Update, (
system_0.run_if(run_once),
system_1.run_if(resource_changed_or_removed::<T>),
system_2.run_if(resource_removed::<T>),
system_3.run_if(on_event::<T>),
system_4.run_if(any_component_removed::<T>),
));
```
# Objective
- Some types are missing reflection attributes, which means we can't use
them in scene serialization etc.
- Effected types
- `BorderRadius`
- `AnimationTransitions`
- `OnAdd`
- `OnInsert`
- `OnRemove`
- My use-case for `OnAdd` etc to derive reflect is 'Serializable
Observer Components'. Add the component, save the scene, then the
observer is re-added on scene load.
```rust
#[derive(Reflect)]
struct MySerializeableObserver<T: Event>(#[reflect(ignore)]PhantomData<T>);
impl<T: Event> Component for MySerializeableObserver<T> {
const STORAGE_TYPE: StorageType = StorageType::Table;
fn register_component_hooks(hooks: &mut ComponentHooks) {
hooks.on_add(|mut world, entity, _| {
world
.commands()
.entity(entity)
.observe(|_trigger: Trigger<T>| {
println!("it triggered etc.");
});
});
}
}
```
## Solution
- Add the missing traits
---
# Objective
We currently cannot iterate from the back of `QueryManyIter`.
## Solution
Implement `DoubleEndedIterator` for `QueryManyIter` and add a
`fetch_next_back` method. These impls are bounded on the underlying
`entity_iter` implementing `DoubleEndedIterator`.
## Changelog
Added `DoubleEndedIterator` implementation for `QueryManyIter`.
Added the `fetch_next_back` method to `QueryManyIter`.
# Objective
- The event propagation benchmark is largely derived from
bevy_eventlistener. However, it doesn't accurately reflect performance
of bevy side, as our event bubble propagation is based on observer.
## Solution
- added several new benchmarks that focuse on observer itself rather
than event bubble
# Objective
When using tracing or
[`bevy_mod_debugdump`](https://github.com/jakobhellermann/bevy_mod_debugdump),
the names of function systems produced by closures are either ambiguous
(like `game::mainapp::{closure}` when tracing) or too long
(`bevy_mod_debugdump` includes full type signature if no name given),
which makes debugging with tracing difficult.
## Solution
Add a function `with_name` to rename a system. The proposed API can be
used in the following way:
```rust
app
.add_systems(Startup, IntoSystem::into_system(|name: SystemName| {
println!("System name: {}", name.name().to_owned());
}).with_name("print_test_system"));
```
## Testing
- There is a test in
`bevy_ecs::system:system_name::test_closure_system_name_regular_param`
# Objective
- Fixes#14333
## Solution
- Updated `trigger_observers` signature to operate over a slice instead
of an `Iterator`.
- Updated calls to `trigger_observers` to match the new signature.
---
## Migration Guide
- TBD
# Objective
- Allow queuing insertion of dynamic components to an existing entity
## Solution
- Add `insert_by_id<T: Send + 'static>(commands: &mut EntityCommands,
component_id: ComponentId, value: T)` and the `try_insert_by_id`
counterpart
## Testing
TODO
- Did you test these changes? If so, how?
- Are there any parts that need more testing?
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
## Alternatives
This PR is not feature-complete for dynamic components. In particular,
it
- only supports one component
- only supports adding components with a known, sized type
These were not implemented because doing so would require enhancing
`CommandQueue` to support pushing unsized commands (or equivalently,
pushing commands with a buffer of data). Even so, the cost would not be
transparent compared to the implementation in this PR, which simply
captures the `ComponentId` and `value: T` into the command closure and
can be easily memcpy'ed to the stack during execution. For example, to
efficiently pass `&[ComponentId]` from the caller to the world, we would
need to:
1. Update `CommandQueue.bytes` from `Vec<MaybeUninit<u8>>` to
`Vec<MaybeUninit<usize>>` so that it has the same alignment as
`ComponentId` (which probably needs to be made `#[repr(transparent)]`
too)
2. After pushing the Command metadata, push padding bytes until the vec
len is a multiple of `size_of::<usize>()`
3. Store `components.len()` in the data
4. memcpy the user-provided `&[ComponentId]` to `CommandQueue.bytes`
5. During execution, round up the data pointer behind the `Command` to
skip padding, then cast the pointer and consume it as a `&[ComponentId]`
The effort here seems unnecessarily high, unless someone else has such a
requirement. At least for the use case I am working with, I only need a
single known type, and if we need multiple components, we could always
enhance this function to accept a `[ComponentId; N]`.
I recommend enhancing the `Bundle` API in the long term to achieve this
goal more elegantly.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Felix Rath <felixm.rath@gmail.com>
# Objective
`TriggerTargets` can not be borrowed for use in `World::trigger_targets`
## Solution
Drop `'static` bound on `TriggerEvent`, keep it for `Command` impl.
## Testing
n/a
# Objective
`Commands::spawn_empty` docs say that it queues a command to spawn an
entity, but it doesn't. It immediately reserves an `Entity` to be
spawned at the next flush point, which is possible because
`Entities::reserve_entity()` takes `&self` and no components are added
yet.
## Solution
Fix docs.
# Objective
Fixes#14202
## Solution
Add `on_replaced` component hook and `OnReplaced` observer trigger
## Testing
- Did you test these changes? If so, how?
- Updated & added unit tests
---
## Changelog
- Added new `on_replaced` component hook and `OnReplaced` observer
trigger for performing cleanup on component values when they are
overwritten with `.insert()`
# Objective
Fixes https://github.com/bevyengine/bevy/issues/14157
## Solution
- Update the ObserverSystem traits to accept an `Out` parameter
## Testing
- Added a test where an observer system has a non-empty output which is
piped into another system
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Add basic bubbling to observers, modeled off `bevy_eventlistener`.
## Solution
- Introduce a new `Traversal` trait for components which point to other
entities.
- Provide a default `TraverseNone: Traversal` component which cannot be
constructed.
- Implement `Traversal` for `Parent`.
- The `Event` trait now has an associated `Traversal` which defaults to
`TraverseNone`.
- Added a field `bubbling: &mut bool` to `Trigger` which can be used to
instruct the runner to bubble the event to the entity specified by the
event's traversal type.
- Added an associated constant `SHOULD_BUBBLE` to `Event` which
configures the default bubbling state.
- Added logic to wire this all up correctly.
Introducing the new associated information directly on `Event` (instead
of a new `BubblingEvent` trait) lets us dispatch both bubbling and
non-bubbling events through the same api.
## Testing
I have added several unit tests to cover the common bugs I identified
during development. Running the unit tests should be enough to validate
correctness. The changes effect unsafe portions of the code, but should
not change any of the safety assertions.
## Changelog
Observers can now bubble up the entity hierarchy! To create a bubbling
event, change your `Derive(Event)` to something like the following:
```rust
#[derive(Component)]
struct MyEvent;
impl Event for MyEvent {
type Traverse = Parent; // This event will propagate up from child to parent.
const AUTO_PROPAGATE: bool = true; // This event will propagate by default.
}
```
You can dispatch a bubbling event using the normal
`world.trigger_targets(MyEvent, entity)`.
Halting an event mid-bubble can be done using
`trigger.propagate(false)`. Events with `AUTO_PROPAGATE = false` will
not propagate by default, but you can enable it using
`trigger.propagate(true)`.
If there are multiple observers attached to a target, they will all be
triggered by bubbling. They all share a bubbling state, which can be
accessed mutably using `trigger.propagation_mut()` (`trigger.propagate`
is just sugar for this).
You can choose to implement `Traversal` for your own types, if you want
to bubble along a different structure than provided by `bevy_hierarchy`.
Implementers must be careful never to produce loops, because this will
cause bevy to hang.
## Migration Guide
+ Manual implementations of `Event` should add associated type `Traverse
= TraverseNone` and associated constant `AUTO_PROPAGATE = false`;
+ `Trigger::new` has new field `propagation: &mut Propagation` which
provides the bubbling state.
+ `ObserverRunner` now takes the same `&mut Propagation` as a final
parameter.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Torstein Grindvik <52322338+torsteingrindvik@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Bevy currently has lot of invalid intra-doc links, let's fix them!
- Also make CI test them, to avoid future regressions.
- Helps with #1983 (but doesn't fix it, as there could still be explicit
links to docs.rs that are broken)
## Solution
- Make `cargo r -p ci -- doc-check` check fail on warnings (could also
be changed to just some specific lints)
- Manually fix all the warnings (note that in some cases it was unclear
to me what the fix should have been, I'll try to highlight them in a
self-review)
# Objective
Fixes#14248 and other URL issues.
## Solution
- Describe the solution used to achieve the objective above.
Removed the random #s in the URL. Led users to the wrong page. For
example, https://bevyengine.org/learn/errors/#b0003 takes users to
https://bevyengine.org/learn/errors/introduction, which is not the right
page. Removing the #s fixes it.
## Testing
- Did you test these changes? If so, how?
I pasted the URL into my address bar and it took me to the right place.
- Are there any parts that need more testing?
No
# Objective
- Often in games you will want to create chains of systems that modify
some event. For example, a chain of damage systems that handle a
DamageEvent and modify the underlying value before the health system
finally consumes the event. Right now this requires either:
* Using a component added to the entity
* Consuming and refiring events
Neither is ideal when really all we want to do is read the events value,
modify it, and write it back.
## Solution
- Create an EventMutator class similar to EventReader but with ResMut<T>
and iterators that return &mut so that events can be mutated.
## Testing
- I replicated all the existing tests for EventReader to make sure
behavior was the same (I believe) and added a number of tests specific
to testing that 1) events can actually be mutated, and that 2)
EventReader sees changes from EventMutator for events it hasn't already
seen.
## Migration Guide
Users currently using `ManualEventReader` should use `EventCursor`
instead. `ManualEventReader` will be removed in Bevy 0.16. Additionally,
`Events::get_reader` has been replaced by `Events::get_cursor`.
Users currently directly accessing the `Events` resource for mutation
should move to `EventMutator` if possible.
---------
Co-authored-by: poopy <gonesbird@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes https://github.com/bevyengine/bevy/issues/13972
## Solution
Added 3 new attributes to the `Component` macro.
## Testing
Added `component_hook_order_spawn_despawn_with_macro_hooks`, that makes
the same as `component_hook_order_spawn_despawn` but uses a struct, that
defines it's hooks with the `Component` macro.
---
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
The bounds for query iterators are quite intimidating.
## Solution
With Rust 1.79, [associated type
bounds](https://github.com/rust-lang/rust/pull/122055/) stabilized,
which can simplify the bounds slightly.
# Objective
Add ability to de-register events from the EventRegistry (and the
associated World).
The initial reasoning relates to retaining support for Event hot
reloading in `dexterous_developer`.
## Solution
Add a `deregister_events<T: Event>(&mut world)` method to the
`EventRegistry` struct.
## Testing
Added an automated test that verifies the event registry adds and
removes `Events<T>` from the world.
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
- Fixes a correctness error introduced in
https://github.com/bevyengine/bevy/pull/14013 ...
## Solution
I've been playing around a lot of with the access code and I realized
that I introduced a soundness error when trying to simplify the code.
When we have a `Or<(With<A>, With<B>)>` filter, we cannot call
```
let mut intermediate = FilteredAccess::default();
$name::update_component_access($name, &mut intermediate);
_new_access.append_or(&intermediate);
```
because that's just equivalent to adding the new components as `Or`
clauses.
For example if the existing `filter_sets` was `vec![With<C>]`, we would
then get `vec![With<C>, With<A>, With<B>]` which translates to `A or B
or C`.
Instead what we want is `(A and B) or (A and C)`, so we need to have
each new OR clause compose with the existing access like so:
```
let mut intermediate = _access.clone();
// if we previously had a With<C> in the filter_set, this will become `With<C> AND With<A>`
$name::update_component_access($name, &mut intermediate);
_new_access.append_or(&intermediate);
```
## Testing
- Added a unit test that is broken in main, but passes in this PR
# Objective
`StaticSystemParam` should delegate all `SystemParam` methods to the
inner param, but it looks like it was missed when the new `queue()`
method was added in #10839.
## Solution
Implement `StaticSystemParam::queue()` to delegate to the inner param.
# Objective
When using combinators such as `EntityCommand::with_entity` to build
commands, it can be easy to forget to apply that command, leading to
dead code. In many cases this doesn't even lead to an unused variable
warning, which can make these mistakes difficult to track down
## Solution
Annotate the method with `#[must_use]`
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The trait method `with_entity` is used to add an `EntityCommand` to the
command queue. Currently this method returns `WithEntity<C>` which pairs
a command with an `Entity`. By replacing this explicit type with an
opaque type, implementors can override this default implementation by
returning a custom command or closure that does the same thing with a
lower memory footprint.
# Solution
Return an opaque type from the method. As a bonus this file is now
cleaner without the `WithEntity` boilerplate
# Objective
Fixes https://github.com/bevyengine/bevy/issues/13993
PR inspired by https://github.com/bevyengine/bevy/pull/14007 to
accomplish the same thing, but maybe in a clearer fashion.
@Gingeh feel free to take my changes and add them to your PR, I don't
want to steal any credit
---------
Co-authored-by: Gingeh <39150378+Gingeh@users.noreply.github.com>
Co-authored-by: Bob Gardner <rgardner@inworld.ai>
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
#12469 changed the `Debug` impl for `Entity`, making sure it's actually
accurate for debugging. To ensure that its can still be readily logged
in error messages and inspectors, this PR added a more concise and
human-friendly `Display` impl.
However, users found this form too verbose: the `to_bits` information
was unhelpful and too long. Fixes#13980.
## Solution
- Don't include `Entity::to_bits` in the `Display` implementation for
`Entity`. This information can readily be accessed and logged for users
who need it.
- Also clean up the implementation of `Display` for `DebugName`,
introduced in https://github.com/bevyengine/bevy/pull/13760, to simply
use the new `Display` impl (since this was the desired format there).
## Testing
I've updated an existing test to verify the output of `Entity::display`.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
- Fix issue #13821
## Solution
- Rewrote the test to ensure that it actually tests the functionality
correctly. Then made the par_read function correctly change the values
of self.reader.last_event_count.
## Testing
- Rewrote the test for par_read to run the system schedule twice,
checking the output each time
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
fixes#13944
I literally just added `Did you forget to call SystemState::apply?` to
the error message. I tested it with the code snipped from the Issue and
yeah it works
# Objective
`with_event` will result in unsafe casting of event data of the given
type to the type expected by the Observer system. This is inherently
unsafe.
## Solution
Flag `Observer::with_event` and `ObserverDescriptor::with_events` as
unsafe. This will not affect normal workflows as `with_event` is
intended for very specific (largely internal) use cases.
This _should_ be backported to 0.14 before release.
---
## Changelog
- `Observer::with_event` is now unsafe.
- Rename `ObserverDescriptor::with_triggers` to
`ObserverDescriptor::with_events` and make it unsafe.
# Objective
Fixes#13933.
## Solution
Changed the return type.
## Testing
Fixed and reused the pre-existing tests for `inspect_entity`.
---
## Migration Guide
- `World::inspect_entity` now returns an `Iterator` instead of a `Vec`.
If you need a `Vec`, immediately collect the iterator:
`world.inspect_entity(entity).collect<Vec<_>>()`
# Objective
Fixes#13917
## Solution
Changed `IntoSystemSetConfigs::chain_ignore_deferred`'s return type from
`SystemConfigs` to `SystemSetConfigs`
## Testing
Tried to run the `ecs_guide` example, where `chain` method is replaced
by `chain_ignore_deferred` method
---
# Objective
- Fix a typo in documentation for `Query::single_mut`
## Solution
- Change `item` to `items`
## Testing
- I built the documentation and it looked fine.
- Since this only affects a doc comment, no further testing should be
necessary.
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Fixed a typo in the documentation for Query.
# Objective
While writing code for the `bevy_ecs` I noticed we were using a
unnecessarily stable sort to sort component ids
## Solution
- Sort component ids with a unstable sort
- Comb the bevy_ecs crate for any other obvious inefficiencies.
- Don't clone component vectors when inserting an archetype.
## Testing
I ran `cargo test -p bevy_ecs`. Everything else I leave to CI.
## Profiling
I measured about a 1% speed increase when spawning entities directly
into a world. Since the difference is so small (and might just be noise)
I didn't bother to figure out which of change if any made the biggest
difference.
<details>
<summary> Tracy data </summary>
Yellow is this PR. Red is the commit I branched from.
</details>
<details>
<summary>Methodology</summary>
I created a system that spawn a 1000 entities each with the same 30
components each frame, and then I measured it's run time. The unusually
high number of components was chosen because the standard library [will
use a insertion sort for slices under 20
elements](0de24a5177/library/core/src/slice/sort.rs (L1048-L1049)).
This holds for both stable and unstable sorts.
</details>
# Objective
- Provide an expressive way to register dynamic behavior in response to
ECS changes that is consistent with existing bevy types and traits as to
provide a smooth user experience.
- Provide a mechanism for immediate changes in response to events during
command application in order to facilitate improved query caching on the
path to relations.
## Solution
- A new fundamental ECS construct, the `Observer`; inspired by flec's
observers but adapted to better fit bevy's access patterns and rust's
type system.
---
## Examples
There are 3 main ways to register observers. The first is a "component
observer" that looks like this:
```rust
world.observe(|trigger: Trigger<OnAdd, Transform>, query: Query<&Transform>| {
let transform = query.get(trigger.entity()).unwrap();
});
```
The above code will spawn a new entity representing the observer that
will run it's callback whenever the `Transform` component is added to an
entity. This is a system-like function that supports dependency
injection for all the standard bevy types: `Query`, `Res`, `Commands`
etc. It also has a `Trigger` parameter that provides information about
the trigger such as the target entity, and the event being triggered.
Importantly these systems run during command application which is key
for their future use to keep ECS internals up to date. There are similar
events for `OnInsert` and `OnRemove`, and this will be expanded with
things such as `ArchetypeCreated`, `TableEmpty` etc. in follow up PRs.
Another way to register an observer is an "entity observer" that looks
like this:
```rust
world.entity_mut(entity).observe(|trigger: Trigger<Resize>| {
// ...
});
```
Entity observers run whenever an event of their type is triggered
targeting that specific entity. This type of observer will de-spawn
itself if the entity (or entities) it is observing is ever de-spawned so
as to not leave dangling observers.
Entity observers can also be spawned from deferred contexts such as
other observers, systems, or hooks using commands:
```rust
commands.entity(entity).observe(|trigger: Trigger<Resize>| {
// ...
});
```
Observers are not limited to in built event types, they can be used with
any type that implements `Event` (which has been extended to implement
Component). This means events can also carry data:
```rust
#[derive(Event)]
struct Resize { x: u32, y: u32 }
commands.entity(entity).observe(|trigger: Trigger<Resize>, query: Query<&mut Size>| {
let event = trigger.event();
// ...
});
// Will trigger the observer when commands are applied.
commands.trigger_targets(Resize { x: 10, y: 10 }, entity);
```
You can also trigger events that target more than one entity at a time:
```rust
commands.trigger_targets(Resize { x: 10, y: 10 }, [e1, e2]);
```
Additionally, Observers don't _need_ entity targets:
```rust
app.observe(|trigger: Trigger<Quit>| {
})
commands.trigger(Quit);
```
In these cases, `trigger.entity()` will be a placeholder.
Observers are actually just normal entities with an `ObserverState` and
`Observer` component! The `observe()` functions above are just shorthand
for:
```rust
world.spawn(Observer::new(|trigger: Trigger<Resize>| {});
```
This will spawn the `Observer` system and use an `on_add` hook to add
the `ObserverState` component.
Dynamic components and trigger types are also fully supported allowing
for runtime defined trigger types.
## Possible Follow-ups
1. Deprecate `RemovedComponents`, observers should fulfill all use cases
while being more flexible and performant.
2. Queries as entities: Swap queries to entities and begin using
observers listening to archetype creation triggers to keep their caches
in sync, this allows unification of `ObserverState` and `QueryState` as
well as unlocking several API improvements for `Query` and the
management of `QueryState`.
3. Trigger bubbling: For some UI use cases in particular users are
likely to want some form of bubbling for entity observers, this is
trivial to implement naively but ideally this includes an acceleration
structure to cache hierarchy traversals.
4. All kinds of other in-built trigger types.
5. Optimization; in order to not bloat the complexity of the PR I have
kept the implementation straightforward, there are several areas where
performance can be improved. The focus for this PR is to get the
behavior implemented and not incur a performance cost for users who
don't use observers.
I am leaving each of these to follow up PR's in order to keep each of
them reviewable as this already includes significant changes.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: MiniaczQ <xnetroidpl@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
As discovered in
https://github.com/Leafwing-Studios/leafwing-input-manager/issues/538,
there appears to be some real weirdness going on in how event updates
are processed between Bevy 0.13 and Bevy 0.14.
To identify the cause and prevent regression, I've added tests to
validate the intended behavior.
My initial suspicion was that this would be fixed by
https://github.com/bevyengine/bevy/pull/13762, but that doesn't seem to
be the case.
Instead, events appear to never be updated at all when using `bevy_app`
by itself. This is part of the problem resolved by
https://github.com/bevyengine/bevy/pull/11528, and introduced by
https://github.com/bevyengine/bevy/pull/10077.
After some investigation, it appears that `signal_event_update_system`
is never added using a bare-bones `App`, and so event updates are always
skipped.
This can be worked around by adding your own copy to a
later-in-the-frame schedule, but that's not a very good fix.
## Solution
Ensure that if we're not using a `FixedUpdate` schedule, events are
always updated every frame.
To do this, I've modified the logic of `event_update_condition` and
`event_update_system` to clearly and correctly differentiate between the
two cases: where we're waiting for a "you should update now" signal and
where we simply don't care.
To encode this, I've added the `ShouldUpdateEvents` enum, replacing a
simple `bool` in `EventRegistry`'s `needs_update` field.
Now, both tests pass as expected, without having to manually add a
system!
## Testing
I've written two parallel unit tests to cover the intended behavior:
1. Test that `iter_current_update_events` works as expected in
`bevy_ecs`.
2. Test that `iter_current_update_events` works as expected in
`bevy_app`
I've also added a test to verify that event updating works correctly in
the presence of a fixed main schedule, and a second test to verify that
fixed updating works at all to help future authors narrow down failures.
## Outstanding
- [x] figure out why the `bevy_app` version of this test fails but the
`bevy_ecs` version does not
- [x] figure out why `EventRegistry::run_updates` isn't working properly
- [x] figure out why `EventRegistry::run_updates` is never getting
called
- [x] figure out why `event_update_condition` is always returning false
- [x] figure out why `EventRegistry::needs_update` is always false
- [x] verify that the problem is a missing `signal_events_update_system`
---------
Co-authored-by: Mike <mike.hsu@gmail.com>
…izer (#13442)"
This reverts commit 5cfb063d4a.
- This PR broke bevy-trait-query, which needs to be able to write a
resource in init_state. See #13798 for more details.
- Note this doesn't fix everything as transmutes for bevy-trait-query
will still be broken,. But the current usage in that crate is UB, so we
need to find another solution.
# Objective
- Split the bevy_ecs::events module so it's easier to work with
## Solution
- Split the event.rs file across multiple files, made sure all tests
passed, and exports from the module were the same as previous
## Testing
- All automated tests pass.
Fixes#13758.
# Objective
Calling `update` on the main app already calls `clear_trackers`. Calling
it again in `SubApps::update` caused RemovedCompenet Events to be
cleared earlier than they should be.
## Solution
- Don't call clear_trackers an extra time.
## Testing
I manually tested the fix with this unit test:
```
#[cfg(test)]
mod test {
use crate::core::{FrameCount, FrameCountPlugin};
use crate::prelude::*;
#[test]
fn test_next_frame_removal() {
#[derive(Component)]
struct Foo;
#[derive(Resource)]
struct RemovedCount(usize);
let mut app = App::new();
app.add_plugins(FrameCountPlugin);
app.add_systems(Startup, |mut commands: Commands| {
for _ in 0..100 {
commands.spawn(Foo);
}
commands.insert_resource(RemovedCount(0));
});
app.add_systems(First, |counter: Res<FrameCount>| {
println!("Frame {}:", counter.0)
});
fn detector_system(
mut removals: RemovedComponents<Foo>,
foos: Query<Entity, With<Foo>>,
mut removed_c: ResMut<RemovedCount>,
) {
for e in removals.read() {
println!(" Detected removed Foo component for {e:?}");
removed_c.0 += 1;
}
let c = foos.iter().count();
println!(" Total Foos: {}", c);
assert_eq!(c + removed_c.0, 100);
}
fn deleter_system(foos: Query<Entity, With<Foo>>, mut commands: Commands) {
foos.iter().next().map(|e| {
commands.entity(e).remove::<Foo>();
});
}
app.add_systems(Update, (detector_system, deleter_system).chain());
app.update();
app.update();
app.update();
app.update();
}
}
```
# Objective
There were some issues with the `serialize` feature:
- `bevy_app` had a `serialize` feature and a dependency on `serde` even
there is no usage of serde at all inside `bevy_app`
- the `bevy_app/serialize` feature enabled `bevy_ecs/serde`, which is
strange
- `bevy_internal/serialize` did not enable `bevy_app/serialize` so there
was no way of serializing an Entity in bevy 0.14
## Solution
- Remove `serde` and `bevy_app/serialize`
- Add a `serialize` flag on `bevy_ecs` that enables `serde`
- ` bevy_internal/serialize` now enables `bevy_ecs/serialize`
# Objective
- My attempt at fulfilling #13629.
## Solution
Renames the `and_then` / `or_else` run condition methods to `and` /
`or`, respectively.
Extends the run conditions API to include a suite of binary logical
operators:
- `and`
- `or`
- `nand`
- `nor`
- `xor`
- `xnor`
## Testing
- Did you test these changes? If so, how?
- The test **run_condition_combinators** was extended to include the
added run condition combinators. A **double_counter** system was added
to test for combinators running on even count cycles.
- Are there any parts that need more testing?
- I'm not too sure how I feel about the "counter" style of testing but I
wanted to keep it consistent. If it's just a unit test I would prefer
simply to just assert `true` == _combinator output_ or `false` ==
_combinator output_ .
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Nothing too specific. The added methods should be equivalent to the
logical operators they are analogous to (`&&` , `||`, `^`, `!`).
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- Should not be relevant, I'm using Windows.
## Changelog
- What changed as a result of this PR?
- The run conditions API.
- If applicable, organize changes under "Added", "Changed", or "Fixed"
sub-headings
- Changed:
- `and_then` run condition combinator renamed to simply `and`
- `or_else` run condition combinator renamed to simply `or`
- Added:
- `nand` run condition combinator.
- `nor` run condition combinator.
- `xor` run condition combinator.
- `xnor` run condition combinator.
## Migration Guide
- The `and_then` run condition method has been replaced with the `and`
run condition method.
- The `or_else` run condition method has been replaced with the `or` run
condition method.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Andres O. Vela <andresovela@users.noreply.github.com>
# Objective
The `EntityCommands::despawn` method was previously changed from
panicking behavior to a warning, but the docs continue to state that it
panics.
## Solution
- Removed panic section, copied warning blurb from `World::despawn`
- Adds a similar warning blurb to
`DespawnRecursiveExt::despawn_recursive` and
`DespawnRecursiveExt::despawn_descendants`
# Objective
- Fixes#13703
## Solution
- Added `mappings` to the `EntityMapper` trait, which returns an
iterator over currently tracked `Entity` to `Entity` mappings.
- Added `DynEntityMapper` as an [object
safe](https://doc.rust-lang.org/reference/items/traits.html#object-safety)
alternative to `EntityMapper`.
- Added `assert_object_safe` as a helper for ensuring traits are object
safe.
## Testing
- Added new unit test `entity_mapper_iteration` which tests the
`SceneEntityMapper` implementation of `EntityMapper::mappings`.
- Added unit tests to ensure `DynEntityMapper`, `DynEq` and `DynHash`
are object safe.
- Passed CI on my Windows 10 development environment
---
## Changelog
- Added `mappings` to `EntityMapper` trait.
## Migration Guide
- If you are implementing `EntityMapper` yourself, you can use the below
as a stub implementation:
```rust
fn mappings(&self) -> impl Iterator<Item = (Entity, Entity)> {
unimplemented!()
}
```
- If you were using `EntityMapper` as a trait object (`dyn
EntityMapper`), instead use `dyn DynEntityMapper` and its associated
methods.
## Notes
- The original issue proposed returning a `Vec` from `EntityMapper`
instead of an `impl Iterator` to preserve its object safety. This is a
simpler option, but also forces an allocation where it isn't strictly
needed. I've opted for this split into `DynEntityMapper` and
`EntityMapper` as it's been done several times across Bevy already, and
provides maximum flexibility to users.
- `assert_object_safe` is an empty function, since the assertion
actually happens once you try to use a `dyn T` for some trait `T`. I
have still added this function to clearly document what object safety is
within Bevy, and to create a standard way to communicate that a given
trait must be object safe.
- Other traits should have tests added to ensure object safety, but I've
left those off to avoid cluttering this PR further.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Add slice based variants of existing `get_many_entities` functions on
`World`. This allows for a collection of entries to be looked up mutably
or immutably instead of requiring a compile time constant number.
## Solution
We just take slices and return Vectors.
the following functions have been added:
- `get_many_entities_dynamic`
- `get_many_entities_dynamic_mut`
- `get_many_entities_from_set_mut`
## Testing
- Doc tests, which pass when run through Miri
# Objective
- Fix#10958 by performing entity mapping on the entities inside of
resources.
## Solution
- Resources can reflect(MapEntitiesResource) and impl MapEntities to get
access to the mapper during the world insert of the scene.
## Testing
- A test resource_entity_map_maps_entities confirms the desired
behavior.
## Changelog
- Added reflect(MapEntitiesResource) for mapping entities on Resources
in a DynamicScene.
fixes 10958
# Objective
- Follow-up on some changes in #11498
- Unblock using `Identifier` to replace `ComponentId` internals.
## Solution
- Implement the same `Reflect` impls from `Entity` onto `Identifier` as
they share same/similar purposes,
## Testing
- No compile errors. Currently `Identifier` has no serialization impls,
so there's no need to test a serialization/deserialization roundtrip to
ensure correctness.
---
## Changelog
### Added
- Reflection implementations on `Identifier`.
# Objective
`SceneEntityMapper` seems like it could be generally useful.
## Solution
Allow end users to call `SceneEntityMapper::new` and
`SceneEntityMapper::finish`.
# Objective
Adds capability to clear all components on an entity without de-spawning
said entity.
## Testing
The function calls `remove_by_id` on every component in the entity
archetype - wasn't sure if it's worth going out of our way to create a
test for this considering `remove_by_id` is already unit tested.
---
## Changelog
Added `clear` function to `EntityWorldMut` which removes all components
on an entity.
## Migration Guide
N/A
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
In #13343, `WorldQuery::get_state` was constrained from `&World` as the
argument to `&Components`, but `WorldQuery::init_state` hasn't yet been
changed from `&mut World` to match.
Fixes#13358
## Solution
Create a wrapper around `&mut Components` and `&mut Storages` that can
be obtained from `&mut World` with a `component_initializer` method.
This new `ComponentInitializer` re-exposes the API on `&mut Components`
minus the `&mut Storages` parameter where it was present. For the
`&Components` API, it simply derefs to its `components` field.
## Changelog
### Added
The `World::component_initializer` method.
The `ComponentInitializer` struct that re-exposes `Components` API.
### Changed
`WorldQuery::init_state` now takes `&mut ComponentInitializer` instead
of `&mut World`.
## Migration Guide
Instead of passing `&mut World` to `WorldQuery::init_state` directly,
pass in a mutable reference to the struct returned from
`World::component_initializer`.
Currently, either an `EntityRef` or `EntityMut` is required in order to
reflect a component on an entity. This can, however, be generalized to
`FilteredEntityRef` and `FilteredEntityMut`, which are versions of
`EntityRef` and `EntityMut` that restrict the components that can be
accessed. This is useful because dynamic queries yield
`FilteredEntityRef` and `FilteredEntityMut` rows when iterated over.
This commit changes `ReflectComponent::contains()`,
`ReflectComponent::reflect()`, and `ReflectComponent::reflect_mut()` to
take an `Into<FilteredEntityRef>` (in the case of `contains()` and
`reflect()`) and `Into<FilteredEntityMut>` (in the case of
`reflect_mut()`). Fortunately, `EntityRef` and `EntityMut` already
implement the corresponding trait, so nothing else has to be done to the
public API. Note that in order to implement
`ReflectComponent::reflect_mut()` properly, an additional method
`FilteredEntityMut::into_mut()` was required, to match the one on
`EntityMut`.
I ran into this when attempting to implement `QUERY` in the Bevy Remote
Protocol when trying to iterate over rows of dynamic queries and fetch
the associated components without unsafe code. There were other
potential ways to work around this problem, but they required either
reimplementing the query logic myself instead of using regular Bevy
queries or storing entity IDs and then issuing another query to fetch
the associated `EntityRef`. Both of these seemed worse than just
improving the `reflect()` function.
## Migration Guide
* `ReflectComponent::contains`, `ReflectComponent::reflect`, and
`ReflectComponent::reflect_mut` now take `FilteredEntityRef` (in the
case of `contains()` and `reflect()`) and `FilteredEntityMut` (in the
case of `reflect_mut()`) parameters. `FilteredEntityRef` and
`FilteredEntityMut` have very similar APIs to `EntityRef` and
`EntityMut` respectively, but optionally restrict the components that
can be accessed.
# Objective
- `FilteredEntity{Ref,Mut}` various `get` methods never checked that the
given component was present on the entity, only the access allowed
reading/writing them, which is always the case when it is constructed
from a `EntityRef`/`EntityMut`/`EntityWorldMut` (and I guess can also
happen with queries containing `Option<T>` that get transmuted).
- In those cases the various `get` methods were calling
`debug_checked_unwrap` on `None`s, which is UB when debug assertions are
not enabled;
- The goal is thus to fix this soundness issue.
## Solution
- Don't call `debug_checked_unwrap` on those `None` and instead
`flatten` them.
## Testing
- This PR includes regression tests for each combination of
`FilteredEntityRef`/`FilteredEntityMut` and component
present/not-present. The two tests for the not-present cases fail on
`main` but success with this PR changes.
# Objective
- Prevent the case where a hook/observer is triggered but the source
entity/component no longer exists
## Solution
- Re-order command application such that all hooks/observers that are
notified will run before any have a chance to invalidate the result.
## Testing
Updated relevant tests in `bevy_ecs`, all other tests pass.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: Mike Hsu <mike.hsu@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The current query iterators cannot be used in positions with a `Debug`
bound.
F.e. when they are packaged in `Result` in the error position, `expect`
cannot be called on them.
Required for `QueryManyIter::entities_all_unique` in #13477.
## Solution
Add simple `Debug` impls that print the query iterator names.
## Changelog
`QueryIter`, `QueryManyIter`, `QueryCombinationIter`, and
`QuerySortedIter` now implement `Debug`.
# Objective
While reviewing the other open hooks-related PRs, I found that the docs
on the `ComponentHooks` struct itself didn't give enough information
about how and why the feature could be used.
## Solution
1. Clean up the docs to add additional context.
2. Add a doc test demonstrating simple usage.
## Testing
The doc test passes locally.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- Implement a general purpose mechanism for building `SystemParam`.
- Unblock the usage of dynamic queries in regular systems.
## Solution
- Implement a `SystemBuilder` type.
## Examples
Here are some simple test cases for the builder:
```rust
fn local_system(local: Local<u64>) -> u64 {
*local
}
fn query_system(query: Query<()>) -> usize {
query.iter().count()
}
fn multi_param_system(a: Local<u64>, b: Local<u64>) -> u64 {
*a + *b + 1
}
#[test]
fn local_builder() {
let mut world = World::new();
let system = SystemBuilder::<()>::new(&mut world)
.builder::<Local<u64>>(|x| *x = 10)
.build(local_system);
let result = world.run_system_once(system);
assert_eq!(result, 10);
}
#[test]
fn query_builder() {
let mut world = World::new();
world.spawn(A);
world.spawn_empty();
let system = SystemBuilder::<()>::new(&mut world)
.builder::<Query<()>>(|query| {
query.with::<A>();
})
.build(query_system);
let result = world.run_system_once(system);
assert_eq!(result, 1);
}
#[test]
fn multi_param_builder() {
let mut world = World::new();
world.spawn(A);
world.spawn_empty();
let system = SystemBuilder::<()>::new(&mut world)
.param::<Local<u64>>()
.param::<Local<u64>>()
.build(multi_param_system);
let result = world.run_system_once(system);
assert_eq!(result, 1);
}
```
This will be expanded as this PR is iterated.
# Objective
Currently, a query iterator can be collected into a `Vec` and sorted,
but this can be quite unwieldy, especially when many `Component`s are
involved. The `itertools` crate helps somewhat, but the need to write a
closure over all of `QueryData`
can sometimes hurt ergonomics, anywhere from slightly to strongly. A key
extraction function only partially helps, as `sort_by_key` does not
allow returning non-`Copy` data. `sort_by` does not suffer from the
`Copy` restriction, but now the user has to write out a `cmp` function
over two `QueryData::Item`s when it could have just been handled by the
`Ord` impl for the key.
`sort` requires the entire `Iterator` Item to be `Ord`, which is rarely
usable without manual helper functionality. If the user wants to hide
away unused components with a `..` range, they need to track item tuple
order across their function. Mutable `QueryData` can also introduce
further complexity.
Additionally, sometimes users solely include `Component`s /`Entity` to
guarantee iteration order.
For a user to write a function to abstract away repeated sorts over
various `QueryData` types they use would require reaching for the
`all_tuples!` macro, and continue tracking tuple order afterwards.
Fixes https://github.com/bevyengine/bevy/issues/1470.
## Solution
Custom sort methods on `QueryIter`, which take a query lens as a generic
argument, like `transmute_lens` in `Query`.
This allows users to choose what part of their queries they pass to
their sort function calls, serving as a kind of "key extraction
function" before the sort call. F.e. allowing users to implement `Ord`
for a Component, then call `query.iter().sort::<OrdComponent>()`
This works independent of mutability in `QueryData`, `QueryData` tuple
order, or the underlying `iter/iter_mut` call.
Non-`Copy` components could also be used this way, an internal
`Arc<usize>` being an example.
If `Ord` impls on components do not suffice, other sort methods can be
used. Notably useful when combined with `EntityRef` or `EntityMut`.
Another boon from using underlying `transmute` functionality, is that
with the [allowed
transmutes](http://dev-docs.bevyengine.org/bevy/ecs/prelude/struct.Query.html#allowed-transmutes),
it is possible to sort a `Query` with `Entity` even if it wasn't
included in the original `Query`.
The additional generic parameter on the methods other than `sort` and
`sort_unstable` currently cannot be removed due to Rust limitations,
however their types can be inferred.
The new methods do not conflict with the `itertools` sort methods, as
those use the "sorted" prefix.
This is implemented barely touching existing code. That change to
existing code being that `QueryIter` now holds on to the reference to
`UnsafeWorldCell` that is used to initialize it.
A lens query is constructed with `Entity` attached at the end, sorted,
and turned into an iterator. The iterator maps away the lens query,
leaving only an iterator of `Entity`, which is used by `QuerySortedIter`
to retrieve the actual items.
`QuerySortedIter` resembles a combination of `QueryManyIter` and
`QueryIter`, but it uses an entity list that is guaranteed to contain
unique entities, and implements `ExactSizeIterator`,
`DoubleEndedIterator`, `FusedIterator` regardless of mutability or
filter kind (archetypal/non-archetypal).
The sort methods are not allowed to be called after `next`, and will
panic otherwise. This is checked using `QueryIterationCursor` state,
which is unique on initialization. Empty queries are an exception to
this, as they do not return any item in the first place.
That is because tracking how many iterations have already passed would
require regressing either normal query iteration a slight bit, or sorted
iteration by a lot. Besides, that would not be the intended use of these
methods.
## Testing
To ensure that `next` being called before `sort` results in a panic, I
added some tests. I also test that empty `QueryIter`s do not exhibit
this restriction.
The query sorts test checks for equivalence to the underlying sorts.
This change requires that `Query<(Entity, Entity)>` remains legal, if
that is not already guaranteed, which is also ensured by the
aforementioned test.
## Next Steps
Implement the set of sort methods for `QueryManyIter` as well.
- This will mostly work the same, other than needing to return a new
`QuerySortedManyIter` to account for iteration
over lists of entities that are not guaranteed to be unique. This new
query iterator will need a bit of internal restructuring
to allow for double-ended mutable iteration, while not regressing
read-only iteration.
The implementations for each pair of
- `sort`, `sort_unstable`,
- `sort_by`, sort_unstable_by,
- `sort_by_key,` `sort_by_cached_key`
are the same aside from the panic message and the sort call, so they
could be merged with an inner function.
That would require the use of higher-ranked trait bounds on
`WorldQuery::Item<'1>`, and is unclear to me whether it is currently
doable.
Iteration in QuerySortedIter might have space for improvement.
When sorting by `Entity`, an `(Entity, Entity)` lens `QueryData` is
constructed, is that worth remedying?
When table sorts are implemented, a fast path could be introduced to
these sort methods.
## Future Possibilities
Implementing `Ord` for EntityLocation might be useful.
Some papercuts in ergonomics can be improved by future Rust features:
- The additional generic parameter aside from the query lens can be
removed once this feature is stable:
`Fn -> impl Trait` (`impl Trait` in `Fn` trait return position)
- With type parameter defaults, the query lens generic can be defaulted
to `QueryData::Item`, allowing the sort methods
to look and behave like `slice::sort` when no query lens is specified.
- With TAIT, the iterator generic on `QuerySortedIter` and thus the huge
visible `impl Iterator` type in the sort function
signatures can be removed.
- With specialization, the bound on `L` could be relaxed to `QueryData`
when the underlying iterator is mutable.
## Changelog
Added `sort`, `sort_unstable`, `sort_by`, `sort_unstable_by`,
`sort_by_key`, `sort_by_cached_key` to `QueryIter`.
# Objective
- Fixes#12377
## Solution
Added simple `#[diagnostic::on_unimplemented(...)]` attributes to some
critical public traits providing a more approachable initial error
message. Where appropriate, a `note` is added indicating that a `derive`
macro is available.
## Examples
<details>
<summary>Examples hidden for brevity</summary>
Below is a collection of examples showing the new error messages
produced by this change. In general, messages will start with a more
Bevy-centric error message (e.g., _`MyComponent` is not a `Component`_),
and a note directing the user to an available derive macro where
appropriate.
### Missing `#[derive(Resource)]`
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
struct MyResource;
fn main() {
App::new()
.insert_resource(MyResource)
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `MyResource` is not a `Resource`
--> examples/app/empty.rs:7:26
|
7 | .insert_resource(MyResource)
| --------------- ^^^^^^^^^^ invalid `Resource`
| |
| required by a bound introduced by this call
|
= help: the trait `Resource` is not implemented for `MyResource`
= note: consider annotating `MyResource` with `#[derive(Resource)]`
= help: the following other types implement trait `Resource`:
AccessibilityRequested
ManageAccessibilityUpdates
bevy::bevy_a11y::Focus
DiagnosticsStore
FrameCount
bevy::prelude::State<S>
SystemInfo
bevy::prelude::Axis<T>
and 141 others
note: required by a bound in `bevy::prelude::App::insert_resource`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_app\src\app.rs:419:31
|
419 | pub fn insert_resource<R: Resource>(&mut self, resource: R) -> &mut Self {
| ^^^^^^^^ required by this bound in `App::insert_resource`
```
</details>
### Putting A `QueryData` in a `QueryFilter` Slot
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
#[derive(Component)]
struct A;
#[derive(Component)]
struct B;
fn my_system(_query: Query<&A, &B>) {}
fn main() {
App::new()
.add_systems(Update, my_system)
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `&B` is not a valid `Query` filter
--> examples/app/empty.rs:9:22
|
9 | fn my_system(_query: Query<&A, &B>) {}
| ^^^^^^^^^^^^^ invalid `Query` filter
|
= help: the trait `QueryFilter` is not implemented for `&B`
= help: the following other types implement trait `QueryFilter`:
With<T>
Without<T>
bevy::prelude::Or<()>
bevy::prelude::Or<(F0,)>
bevy::prelude::Or<(F0, F1)>
bevy::prelude::Or<(F0, F1, F2)>
bevy::prelude::Or<(F0, F1, F2, F3)>
bevy::prelude::Or<(F0, F1, F2, F3, F4)>
and 28 others
note: required by a bound in `bevy::prelude::Query`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_ecs\src\system\query.rs:349:51
|
349 | pub struct Query<'world, 'state, D: QueryData, F: QueryFilter = ()> {
| ^^^^^^^^^^^ required by this bound in `Query`
```
</details>
### Missing `#[derive(Component)]`
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
struct A;
fn my_system(mut commands: Commands) {
commands.spawn(A);
}
fn main() {
App::new()
.add_systems(Startup, my_system)
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `A` is not a `Bundle`
--> examples/app/empty.rs:6:20
|
6 | commands.spawn(A);
| ----- ^ invalid `Bundle`
| |
| required by a bound introduced by this call
|
= help: the trait `bevy::prelude::Component` is not implemented for `A`, which is required by `A: Bundle`
= note: consider annotating `A` with `#[derive(Component)]` or `#[derive(Bundle)]`
= help: the following other types implement trait `Bundle`:
TransformBundle
SceneBundle
DynamicSceneBundle
AudioSourceBundle<Source>
SpriteBundle
SpriteSheetBundle
Text2dBundle
MaterialMesh2dBundle<M>
and 34 others
= note: required for `A` to implement `Bundle`
note: required by a bound in `bevy::prelude::Commands::<'w, 's>::spawn`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_ecs\src\system\commands\mod.rs:243:21
|
243 | pub fn spawn<T: Bundle>(&mut self, bundle: T) -> EntityCommands {
| ^^^^^^ required by this bound in `Commands::<'w, 's>::spawn`
```
</details>
### Missing `#[derive(Asset)]`
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
struct A;
fn main() {
App::new()
.init_asset::<A>()
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `A` is not an `Asset`
--> examples/app/empty.rs:7:23
|
7 | .init_asset::<A>()
| ---------- ^ invalid `Asset`
| |
| required by a bound introduced by this call
|
= help: the trait `Asset` is not implemented for `A`
= note: consider annotating `A` with `#[derive(Asset)]`
= help: the following other types implement trait `Asset`:
Font
AnimationGraph
DynamicScene
Scene
AudioSource
Pitch
bevy::bevy_gltf::Gltf
GltfNode
and 17 others
note: required by a bound in `init_asset`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_asset\src\lib.rs:307:22
|
307 | fn init_asset<A: Asset>(&mut self) -> &mut Self;
| ^^^^^ required by this bound in `AssetApp::init_asset`
```
</details>
### Mismatched Input and Output on System Piping
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
fn producer() -> u32 {
123
}
fn consumer(_: In<u16>) {}
fn main() {
App::new()
.add_systems(Update, producer.pipe(consumer))
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `fn(bevy::prelude::In<u16>) {consumer}` is not a valid system with input `u32` and output `_`
--> examples/app/empty.rs:11:44
|
11 | .add_systems(Update, producer.pipe(consumer))
| ---- ^^^^^^^^ invalid system
| |
| required by a bound introduced by this call
|
= help: the trait `bevy::prelude::IntoSystem<u32, _, _>` is not implemented for fn item `fn(bevy::prelude::In<u16>) {consumer}`
= note: expecting a system which consumes `u32` and produces `_`
note: required by a bound in `pipe`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_ecs\src\system\mod.rs:168:12
|
166 | fn pipe<B, Final, MarkerB>(self, system: B) -> PipeSystem<Self::System, B::System>
| ---- required by a bound in this associated function
167 | where
168 | B: IntoSystem<Out, Final, MarkerB>,
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ required by this bound in `IntoSystem::pipe`
```
</details>
### Missing Reflection
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
#[derive(Component)]
struct MyComponent;
fn main() {
App::new()
.register_type::<MyComponent>()
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `MyComponent` does not provide type registration information
--> examples/app/empty.rs:8:26
|
8 | .register_type::<MyComponent>()
| ------------- ^^^^^^^^^^^ the trait `GetTypeRegistration` is not implemented for `MyComponent`
| |
| required by a bound introduced by this call
|
= note: consider annotating `MyComponent` with `#[derive(Reflect)]`
= help: the following other types implement trait `GetTypeRegistration`:
bool
char
isize
i8
i16
i32
i64
i128
and 443 others
note: required by a bound in `bevy::prelude::App::register_type`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_app\src\app.rs:619:29
|
619 | pub fn register_type<T: bevy_reflect::GetTypeRegistration>(&mut self) -> &mut Self {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ required by this bound in `App::register_type`
```
</details>
### Missing `#[derive(States)]` Implementation
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
#[derive(Debug, Clone, Copy, Default, Eq, PartialEq, Hash)]
enum AppState {
#[default]
Menu,
InGame {
paused: bool,
turbo: bool,
},
}
fn main() {
App::new()
.init_state::<AppState>()
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: the trait bound `AppState: FreelyMutableState` is not satisfied
--> examples/app/empty.rs:15:23
|
15 | .init_state::<AppState>()
| ---------- ^^^^^^^^ the trait `FreelyMutableState` is not implemented for `AppState`
| |
| required by a bound introduced by this call
|
= note: consider annotating `AppState` with `#[derive(States)]`
note: required by a bound in `bevy::prelude::App::init_state`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_app\src\app.rs:282:26
|
282 | pub fn init_state<S: FreelyMutableState + FromWorld>(&mut self) -> &mut Self {
| ^^^^^^^^^^^^^^^^^^ required by this bound in `App::init_state`
```
</details>
### Adding a `System` with Unhandled Output
<details>
<summary>Example Code</summary>
```rust
use bevy::prelude::*;
fn producer() -> u32 {
123
}
fn main() {
App::new()
.add_systems(Update, consumer)
.run();
}
```
</details>
<details>
<summary>Error Generated</summary>
```error
error[E0277]: `fn() -> u32 {producer}` does not describe a valid system configuration
--> examples/app/empty.rs:9:30
|
9 | .add_systems(Update, producer)
| ----------- ^^^^^^^^ invalid system configuration
| |
| required by a bound introduced by this call
|
= help: the trait `IntoSystem<(), (), _>` is not implemented for fn item `fn() -> u32 {producer}`, which is required by `fn() -> u32 {producer}: IntoSystemConfigs<_>`
= help: the following other types implement trait `IntoSystemConfigs<Marker>`:
<Box<(dyn bevy::prelude::System<In = (), Out = ()> + 'static)> as IntoSystemConfigs<()>>
<NodeConfigs<Box<(dyn bevy::prelude::System<In = (), Out = ()> + 'static)>> as IntoSystemConfigs<()>>
<(S0,) as IntoSystemConfigs<(SystemConfigTupleMarker, P0)>>
<(S0, S1) as IntoSystemConfigs<(SystemConfigTupleMarker, P0, P1)>>
<(S0, S1, S2) as IntoSystemConfigs<(SystemConfigTupleMarker, P0, P1, P2)>>
<(S0, S1, S2, S3) as IntoSystemConfigs<(SystemConfigTupleMarker, P0, P1, P2, P3)>>
<(S0, S1, S2, S3, S4) as IntoSystemConfigs<(SystemConfigTupleMarker, P0, P1, P2, P3, P4)>>
<(S0, S1, S2, S3, S4, S5) as IntoSystemConfigs<(SystemConfigTupleMarker, P0, P1, P2, P3, P4, P5)>>
and 14 others
= note: required for `fn() -> u32 {producer}` to implement `IntoSystemConfigs<_>`
note: required by a bound in `bevy::prelude::App::add_systems`
--> C:\Users\Zac\Documents\GitHub\bevy\crates\bevy_app\src\app.rs:342:23
|
339 | pub fn add_systems<M>(
| ----------- required by a bound in this associated function
...
342 | systems: impl IntoSystemConfigs<M>,
| ^^^^^^^^^^^^^^^^^^^^ required by this bound in `App::add_systems`
```
</details>
</details>
## Testing
CI passed locally.
## Migration Guide
Upgrade to version 1.78 (or higher) of Rust.
## Future Work
- Currently, hints are not supported in this diagnostic. Ideally,
suggestions like _"consider using ..."_ would be in a hint rather than a
note, but that is the best option for now.
- System chaining and other `all_tuples!(...)`-based traits have bad
error messages due to the slightly different error message format.
---------
Co-authored-by: Jamie Ridding <Themayu@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
