Commit graph

645 commits

Author SHA1 Message Date
Lukasz Majewski
69d6cbe748 usb:gadget:Remove redundant #includes for USB composite gadget and its functions
Only the <linux/usb/gadget.h> requires error.h include. Hence, several
includes of error.h at USB gadget functions are not needed.

Moreover unnecessary malloc.h includes were also removed.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2013-09-24 17:51:36 +02:00
Lukasz Majewski
ba4e95c9f0 usb:g_dnl:ums: Conditional compilation for mass storage function (f_mass_storage)
The mass storage composite function is now compiled in only when
CONFIG_USB_GADGET_MASS_STORAGE is defined.
Such change provides binary size reduction for boards which use USB
download gadget (like am335x_evm) with DFU, but don't use UMS.

For example at am335x_evm board reduction is more than 2KiB for
text and around 120B for data.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2013-09-24 17:51:35 +02:00
Bo Shen
9e40493fd8 USB: gadget: add atmel usba udc driver
Add atmel usba udc driver support, porting from Linux kernel

The original code in Linux Kernel information is as following

commit e01ee9f509a927158f670408b41127d4166db1c7
Author: Jingoo Han <jg1.han@samsung.com>
Date:   Tue Jul 30 17:00:51 2013 +0900

    usb: gadget: use dev_get_platdata()

    Use the wrapper function for retrieving the platform data instead of
    accessing dev->platform_data directly.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-09-24 17:51:35 +02:00
Troy Kisky
898d686eea usb: gadget: config: fix unaligned access issues
As seen with codesourcery compiler 2010q1, the buf pointer in
usb_request structure is not aligned on 4 bytes boundary causing
data aborts in eth_setup -> conf_buf -> usb_gadget_config_buf.
Make it as align access to fix this issue.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
[voice.shen@atmel.com: add commit message]
Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-09-24 17:51:35 +02:00
Joel Fernandes
5290759cc4 usb: gadget: Fix data aborts during USB ethernet boot
As seen on GCC 4.6 Linaro compiler, control_req buffer is not aligned
on 4 byte boundaray causing data aborts in eth_setup -> conf_buf
during dhcp boot over usb_ether. Fix the issue my aligning control_req
buffer using DEFINE_CACHE_ALIGN_BUFFER.

Tested on am335x_evm platform (beaglebone).
Applies on 2013.10-rc1 branch.

Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Joel Fernandes <joelf@ti.com>
2013-09-24 17:51:34 +02:00
Albert ARIBAUD
4eef93da26 Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' 2013-09-04 11:50:25 +02:00
Fabio Estevam
76b6b19614 usb: ehci-mx5: Use 'bool' instead of 'unsigned char'
The 'enable' argument can be better expressed as boolean.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2013-08-26 21:56:34 +02:00
Fabio Estevam
c3904128ad usb: ehci-mx5: Remove unneeded write to cscmr1 register
Currently we have the following behavior in ehci_hcd_init()

- Read csmr1 register, clear bit 26 and then set bit 26.

However a little bit later we call set_usb_phy_clk() which clears bit 26, so
let's get rid of the unnecessary code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-08-26 21:56:34 +02:00
Lukasz Majewski
c4219a82cd usb:dfu:g_dnl: Refactoring the string definition code for g_dnl driver
The manufacturer and product IDs are dynamically assigned when gadget is
bind.
Now the IDs aren't assigned at struct g_dnl_string_defs definition.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Egli, Samuel" <samuel.egli@siemens.com>
2013-08-26 21:56:34 +02:00
Lukasz Majewski
cfc2d0d632 usb:dfu:g_dnl: Change number of exported configurations at composite gadget
USB composite gadget (g_dnl) supports only one configuration. Due to that
the corresponding field - bConfigurationValue has been changed.

Moreover more descriptive names were chosen for relevant fields.

Windows XP setup:
- Thesyscon USB Descriptor Dumper
- zadig_xp program for WinUSB installation (which is required by dfu-util)
- dfu-util for windows (version 0.6)
- TRATS target connected via USB hub to test Win XP machine.

Tested at: Trats - Exynos4210

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: "Egli, Samuel" <samuel.egli@siemens.com>
2013-08-26 21:56:34 +02:00
Dan Murphy
120503f32e ARM: OMAP: USB: Fix linker error when ULPI is not defined
Fix the linker error for missing ulpi_reset when ulpi is not defined
in the board config.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Marek Vasut <marex@denx.de>
2013-08-26 21:55:46 +02:00
Dan Murphy
d3d037ae18 ARM: OMAP5: USB: Add OMAP5 common USB EHCI information
* Enable the OMAP5 EHCI host clocks
* Add OMAP5 EHCI register definitions
* Add OMAP5 ES2 host revision

Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-08-26 21:55:46 +02:00
Wu, Josh
2f96b06be5 linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.h
Since kernel code current use many dev_xxx() instead of using printk. To
compatible, move those dev_xxx from usb driver to linux/compat.h. Then all
driver code can use dev_err, dev_info and dev_vdbg.

This patch also removed duplicated macro definitions in usb driver.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22 16:50:29 +02:00
Wolfgang Denk
cb3761ea99 SPDX-License-Identifier: convert BSD-3-Clause files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini Don't remove some copyrights by accident]
Signed-off-by: Tom Rini <trini@ti.com>
2013-08-19 15:45:35 -04:00
Stefan Roese
2eb60902a0 net: smsc95xx: Add support for another SMSC95xx variant
This patch adds support for the SMSC9500 with product id 0x9900 which is
equipped in the "EXSYS USB 2.0" etherner USB adapter.

Tested on omap3_beagle.

Signed-off-by: Stefan Roese <sr@denx.de>
2013-08-19 12:34:18 -05:00
Tom Rini
e20cc2ca15 Merge branch 'master' of git://88.191.163.10/u-boot-arm
Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.

Conflicts:
	arch/arm/include/asm/arch-am33xx/hardware.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-08-18 14:14:34 -04:00
Lokesh Vutla
32f420b8ec musb: Disable extra prints
There are many musb prints in SPL and U-Boot log.
These prints are required only during musb debug.
So replacing printk with pr_debug in musb_core.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2013-08-15 08:51:10 -04:00
Nikita Kiryanov
8bc3603675 ehci-hcd: fix memory leak in lowlevel init
usb_lowlevel_init() allocates a new periodic_list each time it is invoked,
without freeing the original list. Since it is initialized later on in the code,
just reuse the first-allocated list in future invocations of usb_lowlevel_init.

Cc: Marek Vasut <marex@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2013-07-29 23:01:33 +02:00
Roger Quadros
bb1f327d0a usb: ehci-omap: Don't softreset USB High-speed Host (UHH) Module
Fixes NFS root problems with Beagle (3530 ES1.0) when used with
external USB-ethernet adapter and "USB start" command used within
u-boot.

Soft resetting the UHH module causes instability issues on
all OMAPs so we just avoid it.

See OMAP36xx Errata
  i571: USB host EHCI may stall when entering smart-standby mode
  i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock

On OMAP4/5, soft-resetting the UHH module can put it into
Smart-Idle mode and lead to a deadlock.

On OMAP3 this doesn't seem to be the case but still instabilities
are observed on beagle (3530 ES1.0) if soft-reset is used.
 e.g. NFS root failures with Linux kernel.

Signed-off-by: Roger Quadros <rogerq@ti.com>
2013-07-29 23:01:33 +02:00
Lukasz Majewski
6bed7ce569 dfu: Implementation of target reset after communication with dfu-util's -R switch
This patch extends dfu code to support transmission with -R switch
specified at dfu-util.

When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after
successful data transmission. Then dfu resources are released and reset
command is issued.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-07-29 23:01:33 +02:00
Marek Vasut
6dd30af0fa usb: mv_udc: Add bounce buffer
The requests sent to the controller are not properly cache aligned
most of the time, thus implement a simple bounce buffer to avoid
problem with cache.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:33 +02:00
Marek Vasut
f19a343e73 usb: mv_udc: Add proper cache management
Implement functions to flush/invalidate dcache over QH and qTDs
and make use of them where appropriate. Also use them to replace
the old incorrect cache management attempt. This is the first step
towards making this driver work with data cache enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:33 +02:00
Marek Vasut
ede709c0d2 usb: mv_udc: Implement better qTD item accessor
The code for retrieving qTD item for particular endpoint is hard
to understand, moreover it's duplicated all over the driver. Move
the code into single nice and documented function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:33 +02:00
Marek Vasut
8a095a68ce usb: mv_udc: Improve allocation of qTD items
Allocate the qTD items all at once instead of allocating them
separately. Moreover, make sure each qTD is properly aligned
to 32-bytes boundary and that cache can be safely flushed over
each qTD touple.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
b5cd45bfad usb: mv_udc: Implement better QH accessor
The code for retrieving QH for particular endpoint is hard to understand,
moreover it's duplicated all over the driver. Move the code into single
nice and documented function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
5804b8859a usb: mv_udc: Add cacheline length check
Check the length of system cacheline at compile-time and fail
if the system uses too long cachelines.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
ab65da1446 usb: mv_udc: Properly align the endpoint QH and qTD list
The endpoint QH list has to be aligned to 10-bit boundary. We also have
to make sure the list is aligned on a cacheline boundary. Make sure it
is. Furthermore, check if the memory allocation for the QH list didn't
fail. Moveover, improve the comment about the QH list structure.

Finally, the qTD item list has to be aligned only to 5-bit boundary, not
10-bit as it is now, fix this as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
ab52df19c1 usb: mv_udc: Move QH and qTD into mv_drv
Both the endpoint queue head and the endpoint item list is a controller
specific thing. Move them both into controller private data.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
fe48f05817 usb: mv_udc: Init mv_drv.gadget.ops statically
There is no need to init this field at runtime, so init it statically.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
f646317739 usb: mv_udc: Remove QH_MAXNUM macro
The QH_MAXNUM is used in absolutelly incorrect manner and is not
even needed. Remove it and correctly replace it's occurance with
2 * NUM_ENDPOINTS .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:32 +02:00
Marek Vasut
d76630386d usb: mv_udc: Clean up the initial variable check
Clean up the code that checks the validity of a USB gadget driver
in usb_gadget_register_driver(). Moreover, limit the speed of the
driver to either FULL or HIGH, this is more precise and once we
have xHCI support, also more correct.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:31 +02:00
Marek Vasut
be7ed2533d usb: mv_udc: Make use of struct ehci_ctrl
The usb_lowlevel_init() call already fills and passes back struct
ehci_ctrl , which readily contains correctly determined address of
the port register block address computed from values from controller
configuration registers. Leverage this and make use of this value
as this makes the code mode universal, but also gets us rid of the
CONFIG_USB_REG_BASE configuration option.

Moreover, this patch cleans up the usb_gadget_register_driver() call
a little by correcting the error handling. Note the usb_lowlevel_init()
and mvudc_probe() are now called in reversed order, but this has no
impact on the code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:31 +02:00
Marek Vasut
b959655f18 usb: ehci: Split out struct ehci_ctrl definition
Move the struct ehci_ctrl defition from ehci-hcd.c into ehci.h
so it can be re-used by drivers. In particular, the mv_udc driver
can benefit from this move.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:31 +02:00
Marek Vasut
2ea4b44832 usb: mv_udc: Clean up the EP initialization
Move the constant values that are programmed into mv_ep.ep into
separate static const structure so they can be memcpy()'d when
the initialization happens.

Moveover, we only every init NUM_ENDPOINTS, not 2 * NUM_ENDPOINTS,
so fix this bug as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:31 +02:00
Marek Vasut
532d846f89 usb: mv_udc: Move endpoint array into driver data
The endpoints are operated on a per-controller basis, move the
endpoint array into controller's private data. Also shuffle the
struct mv_ep structure definition just above the definition of
the struct mv_drv so they're well grouped together.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:31 +02:00
Marek Vasut
a7eafcfe45 usb: mv_udc: Unbreak the mv_udc driver
The mv_udc driver is broken for a while and doesn't even compile.
This patch fixes the issues and gets the driver into working state
again. This driver was tested on Freescale i.MX233/i.MX28 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lei Wen <leiwen@marvell.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-07-29 23:01:31 +02:00
Wolfgang Denk
eee479cf6a Add LGPL-2.1+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-07-24 09:45:01 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Tom Rini
fbbbc86e8e Merge branch 'master' of git://git.denx.de/u-boot-arm
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.

Conflicts:
	arch/arm/dts/exynos5250.dtsi

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-12 10:36:48 -04:00
Jim Lin
7e44d9320e ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
Tegra30 and Tegra114 are compatible except PLL parameters.

Tested on Tegra30 Cardhu, and Tegra114 Dalmore
platforms. All works well.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-07-11 14:15:15 -07:00
Mike Dunn
ecc8edbf69 usb: pxa27x_udc: fix compiler warnings
Newer gcc versions warn about unused variables.  This patch corrects a few of
those warnings that popped up in a build for the palmtreo680 board.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2013-07-10 20:18:57 +02:00
Łukasz Majewski
81c065d2a0 dfu: Update DFU's authorship history
The DFU's state machine original implementation author and copyright were
missing.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
2013-07-10 20:18:57 +02:00
Michael Trimarchi
b0857c45c1 usb: omap: ulpi: fix ulpi transceiver access
This patch fix the omap access to the transceiver
configuration registers using the ulpi bus. As reported by
the documentation the bit31 is used only to check if the
transaction is done or still running and the reading and
writing operation have different offset and have different
values. What we need to do at the end of a transaction is
leave the bus in done state. Anyway an error using the ulpi
omap register is not recoverable so any error give out the
usage of this interface.

Tested on a custom OMAP5430 board with a TUSB1210 ULPI PHY
on USBB1.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
2013-07-02 09:21:15 -04:00
Pierre Aubert
befd387242 usb: add support for the USB Ethernet adapter D-Link DUB-E100 H/W Ver C1
This trivial patch adds the definition of the vid/pid for the Ver C1 of the
USB Ethernet adapter D-Link DUB-E100.

Signed-off-by: Pierre Aubert <p.aubert@staubli.com>
CC: Marek Vasut <marex@denx.de>
2013-06-30 18:41:08 +02:00
Lukasz Majewski
e059a400ad dfu:function: Fix number of allocated DFU function pointers
This subtle change fix problem with too small amount of allocated
memory to store DFU function pointers.

One needs to allocate extra space for sentinel NULL pointer in this array
of function pointers.

With the previous code, the NULL value overwrites malloc internal data
and afterwards free(f_dfu->function) crashes.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2013-06-30 18:41:08 +02:00
Heiko Schocher
7a34278542 usb, musb-new: add wdt trigger
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
2013-06-30 18:41:07 +02:00
Heiko Schocher
c5398cc968 usb, g_dnl: make possibility to fixup the device_desc board specific
add a weak dummy function g_dnl_fixup to add the possibility to update
the device_desc board specific. Used on the upcoming siemens board
support, where idVendor and idProduct is stored in an eeprom.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2013-06-30 18:41:07 +02:00
Heiko Schocher
ad5f977889 usb, dfu gadget: switch to dfu mode in dfu_bind
- set in to_dfu_mode() f_dfu->dfu_state = DFU_STATE_dfuIDLE
  as after every to_dfu_mode call this is done, so move
  this into to_dfu_mode
- switch in dfu_bind() into dfu mode:
  This fixes wrong "dfu-util -l" output, when calling
  "dfu-util -l" after a board reset, without doing a
  download before. See also discussion here:

http://lists.denx.de/pipermail/u-boot/2013-June/157272.html

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@ti.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Samuel Egli <samuel.egli@siemens.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2013-06-30 18:41:07 +02:00
Piotr Wilczek
12595e99e4 usb:composite: use memcpy to avoid unaligned access
This patch memcpy is used instead of an assignment to
avoid unaligned access execption on some ARM platforms.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2013-06-30 18:41:07 +02:00
Piotr Wilczek
7f3cf4060f drivers:usb: use get|put_unaligned_le16
This patch use get|put_unaligned_le16 to access structure data
to avoid data abort on some ARM platforms.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Marek Vasut <marex@denx.de>
2013-06-30 18:41:07 +02:00
Axel Lin
e31dc61e7d usb: musb: Use ARRAY_SIZE at appropriate places
Signed-off-by: Axel Lin <axel.lin@ingics.com>
2013-06-26 10:26:06 -04:00
Tom Rini
41341221d1 Merge branch 'master' of git://git.denx.de/u-boot-arm
Small conflict over DRA7XX updates and adding SRAM_SCRATCH_SPACE_ADDR

Conflicts:
	arch/arm/include/asm/arch-omap5/omap.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-06-13 15:16:15 -04:00
Heiko Schocher
c67b0e42a5 usb, composite: after unregister gadget driver set composite to NULL
Without this, second usb_composite_register() call fails always
with -EINVAL.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2013-06-12 22:22:52 +02:00
Stephen Warren
d3e0747846 usb: ehci: add missing cache managment
Commit 8f62ca6 "usb: ehci: Support interrupt transfers via periodic list"
didn't include any cache management in the new interrupt transfer path.
It also added an extra write to or_asynclistaddr in usb_lowlevel_init(),
without having flushed out the data there.

Add the missing cache management calls, so that the code works again.

This allows the USB keyboard on Tegra's Seaboard/Springbank boards to
work.

Cc: Patrick Georgi <patrick@georgi-clan.de>
Cc: Vincent Palatin <vpalatin@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-06-12 22:22:52 +02:00
Kuo-Jung Su
64cfd3f964 usb: gadget: add Faraday FOTG210 USB gadget support
The Faraday FOTG210 is an OTG chip which could operate
as either an EHCI Host or a USB Device at a time.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Marek Vasut <marex@denx.de>
2013-06-12 22:22:52 +02:00
Kuo-Jung Su
e82a316d7f usb: ehci: add Faraday USB 2.0 EHCI support
This patch adds support to both Faraday FUSBH200 and FOTG210,
the differences between Faraday EHCI and standard EHCI are
listed bellow:

1. The PORTSC starts at 0x30 instead of 0x44.
2. The CONFIGFLAG(0x40) is not only un-implemented, and
   also has its address space removed.
3. Faraday EHCI is a TDI design, but it doesn't
   compatible with the general TDI implementation
   found at both U-Boot and Linux.
4. The ISOC descriptors differ from standard EHCI in
   several ways. But since U-boot doesn't support ISOC,
   we don't have to worry about that.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Marek Vasut <marex@denx.de>
2013-06-12 22:22:51 +02:00
Kuo-Jung Su
1dde1423ad usb: ehci: add weak-aliased function for PORTSC
There is at least one non-EHCI compliant controller (i.e. Faraday EHCI)
not only leave RESERVED and CONFIGFLAG registers un-implemented
but also has their address spaces removed.

As an result, the PORTSC register of Faraday EHCI always
starts from 0x30 instead of 0x44 in standard EHCI.

So that we'll need a weak-aliased function for abstraction.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Marek Vasut <marex@denx.de>
2013-06-12 22:22:51 +02:00
Kuo-Jung Su
9c6a9d7c8b usb: ehci: prevent bad PORTSC register access
1. The 'index' of ehci_submit_root() is not always > 0.

   e.g.
   While it gets invoked from usb_get_descriptor(),
   the 'index' is always a '0'. (See ch.9 of USB2.0)

2. The PORTSC register is not always required, and thus it
   should only report a port error when necessary.
   It would cause a port scan failure if the ehci_submit_root()
   always gets terminated by a port error.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Marek Vasut <marex@denx.de>
2013-06-12 22:22:51 +02:00
Vivek Gautam
f6664ba4bc usb: gadget: Use unaligned access for wMaxPacketSize
Use get_unaligned() while fetching wMaxPacketSize to avoid
voilating any alignment rules.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Piotr Wilczek <p.wilczek@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lukasz Dalek <luk0104@gmail.com>
Cc: Marek Vasut <marex@denx.de>
2013-06-12 22:22:51 +02:00
Julius Werner
4edcf0a3df usb: asix: Move software resets to basic_init
The ASIX driver calls a basic_init() function during get_info(), so that
not all initialization tasks need to be redone on every init().
Unfortunately, the most important one is still triggered too often: the
driver does a full port and MII reset on every asix_init(), requiring up
to several seconds to reestablish the link.

This patch confines that software reset into the asix_basic_init()
function so that it will only be executed once. This saves about a
second of boot time on systems using BOOTP.

Note: this patch was previously submitted many moons ago as:

   usb: usbeth: asix: Do a fast init if link already established

That patch seens to have been lost or forgotten, so this is a rebased
version. It is tested on snow with a Asix USB dongle (Cisco).

Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2013-06-12 22:22:51 +02:00
Simon Glass
ed10e66aba usb: Correct CLEAR_FEATURE code in ehci-hcd
This commit broke USB2 on link (Chromebook Pixel):

  020bbcb usb: hub: Power-cycle on root-hub ports

However the root cause seems to be a missing mask and missing 'break'
in ehci-hcd.c. This patch fixes both.

On link, 'usb start' with a USB keyboard and memory stick inserted now
finds both. The keyboard works as expected. Also ext2ls shows a directory
listing from the memory stick.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-12 22:22:50 +02:00
Lokesh Vutla
9239f5b625 ARM: OMAP4+: Cleanup header files
After having the u-boot clean up series, there are
many definitions that are unused in header files.
Removing all those unused ones.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-06-10 08:43:09 -04:00
Albert ARIBAUD
a19b0dd62d Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	common/cmd_fpga.c
	drivers/usb/host/ohci-at91.c
2013-05-30 14:45:06 +02:00
Bo Shen
e5e8bb05a4 USB: ohci-at91: support sama5d3x devices
Add OHCI support for sama5d3x devices

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-05-21 11:54:13 +02:00
Lubomir Popov
e7dcecea9b OMAP5: Enable USB Ethernet support with LAN9730
Added the LAN9730 to list of supported devices. This chip is used
in the sEVM, uEVM and som5_evb. Tested on the som5_evb with dhcp
and ping.

Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
2013-05-14 15:37:58 -04:00
Albert ARIBAUD
cac423a730 Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' 2013-05-11 22:24:28 +02:00
Albert ARIBAUD
ec7023db8d Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	drivers/mtd/nand/mxc_nand_spl.c
	include/configs/m28evk.h
2013-05-11 09:25:36 +02:00
Nishanth Menon
b29c2f0c14 twl4030: make twl4030_i2c_read_u8 prototype consistent
u-boot standard i2c read prototype is
i2c_read(addr, reg, 1, &buf, 1)

twl4030_i2c_read_u8(u8 addr, u8 *val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_read_u8(u8 addr, u8 reg, u8 *val)

Signed-off-by: Nishanth Menon <nm@ti.com>
2013-05-10 08:25:54 -04:00
Nishanth Menon
0208aaf6c2 twl4030: make twl4030_i2c_write_u8 prototype consistent
u-boot standard i2c register write prototype is
i2c_reg_write(u8 addr, u8 reg, u8 val)

twl4030_i2c_write_u8(u8 addr, u8 val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_write_u8(u8 addr, u8 reg, u8 val)

Signed-off-by: Nishanth Menon <nm@ti.com>
2013-05-10 08:25:54 -04:00
Vivek Gautam
4f4eab4d14 usb: common: Use a global definition for 'min3'
We can use a common global method for calculating minimum of
3 numbers. Put the same in 'common header' and let 'ehci'
use it.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Tom Rini <trini@ti.com>
2013-05-06 02:16:37 +02:00
Bo Shen
158947d276 USB: ohci-at91: make OHCI work on at91sam9g10 SoC
The at91sam9g10 need to configure HCK0 to make OHCI work

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-05-05 23:54:22 +02:00
Julius Werner
7d9aa8fd87 usb: Add new command to set USB 2.0 port test modes
This patch adds a new 'usb test' command, that will set a port to a USB
2.0 test mode (see USB 2.0 spec 7.1.20). It supports all five test modes
on both downstream hub ports and ordinary device's upstream ports. In
addition, it supports EHCI root hub ports.

Signed-off-by: Julius Werner <jwerner@chromium.org>
2013-05-05 23:54:21 +02:00
Mike Dunn
e0e89e236f pxa27x_udc: remove call to unimplemented set_GPIO_mode()
If CONFIG_USB_DEV_PULLUP_GPIO is defined, a link error occurs because the
set_GPIO_mode() helper function is not implemented.  This function doesn't do
much except make the code a little more readable, so I just manually coded its
equivalent and removed the prototype from the header file.  It is invoked no
where else in the code.

While I was at it, I noticed that two other function prototypes in the same
header file are also neither implemented nor invoked anywhere, so I removed them
as well.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2013-05-05 23:47:05 +02:00
Jim Lin
b068deb363 USB: EHCI: Add weak functions to support new chip
Add ehci_get_port_speed() and ehci_set_usbmode() weak functions
for platform driver to support new chip.

Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-05-05 23:46:41 +02:00
Benoît Thébaudeau
ba5dfc11ba imx: mx5: Remove legacy iomux support
Legacy iomux support is no longer needed now that all boards have been converted
to iomux-v3.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2013-05-05 17:55:05 +02:00
Albert ARIBAUD
1812201997 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	drivers/video/exynos_fb.c
2013-04-12 22:07:57 +02:00
Benoît Thébaudeau
e53232250b arm: Remove support for unused s3c64xx
Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so
remove associated code. It will still be possible to restore it later from the
Git history if necessary.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-04-12 07:55:08 +02:00
Bin Liu
76b09b8561 musb: set MUSB speed based on CONFIG
Do not config MUSB to highspeed mode if CONFIG_USB_GADGET_DUALSPEED
is not set, in which case Ether gadget only operates in fullspeed.

Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
2013-04-08 11:29:04 -04:00
Bin Liu
4de602f2b0 musb: am335x: disable bulk split-combine feature
On TI AM335x devices, MUSB has bulk split/combine feature enabled
in the ConfigData register, but the current MUSB driver does not
support it yet. Therefore, disable the feature for now, until the
driver adds the support.

One usecase which is broken because of this feature is that Ether
gadget stops working in Fullspeed mode (by un-defining
CONFIG_USB_GADGET_DUALSPEED)

After desabled this feature, MUSB driver send packets in proper size
(no more than 64 bytes) in Fullspeed mode.

This has been validated with Ether gadget in Fullspeed mode on AM335x
EVM.

Signed-off-by: Bin Liu <b-liu@ti.com>
2013-04-08 11:29:04 -04:00
York Sun
472d546054 Consolidate bool type
'bool' is defined in random places. This patch consolidates them into a
single header file include/linux/types.h, using stdbool.h introduced in C99.

All other #define, typedef and enum are removed. They are all consistent with
true = 1, false = 0.

Replace FALSE, False with false. Replace TRUE, True with true.
Skip *.py, *.php, lib/* files.

Signed-off-by: York Sun <yorksun@freescale.com>
2013-04-01 16:33:52 -04:00
Tom Rini
3c47f2f487 Merge branch 'master' of git://git.denx.de/u-boot-usb 2013-03-18 15:33:47 -04:00
Vincent Palatin
ae003d0570 usb: Add multiple controllers support for EHCI PCI
Use the ability to have several active EHCI controller on a system
in the PCI EHCI controller implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18 18:58:55 +01:00
Michael Spang
032868a432 usb: usbeth: smsc95xx: remove EEPROM loaded check
[port of Linux kernel commit bcd218be5aeb by Steve Glendinning]

The eeprom read & write commands currently check the E2P_CMD_LOADED_ bit is
set before allowing any operations.  This prevents any reading or writing
unless a correctly programmed EEPROM is installed.

Signed-off-by: Michael Spang <spang@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2013-03-18 18:58:54 +01:00
Vincent Palatin
61755c7908 usb: ehci: Fix aliasing issue in EHCI interrupt code
The interrupt endpoint handling code stores the buffer pointer in the QH
padding field. We need to make it the size of a pointer to avoid strict
aliasing issue with the compiler.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18 18:58:54 +01:00
Patrick Georgi
8f62ca646f usb: ehci: Support interrupt transfers via periodic list
Interrupt transfers aren't meant to be used from the async list
(the EHCI spec indicates trouble with low/full-speed intr on async).

Build a periodic list instead, and provide an API to make use of it.
Then, use that API from the existing interrupt transfer API.

This provides support for USB keyboards using EHCI.

Use timeouts to ensure we cannot get stuck in the keyboard scanning
if something wrong happens (USB device unplugged or fatal I/O error)

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Julius Werner <jwerner@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-18 18:58:54 +01:00
Vivek Gautam
c74b0116b6 usb: ehci: exynos: Enable non-dt path
Enabling the non-dt path for the driver so that
we don't get any build errors for non-dt configuration.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-03-18 18:58:54 +01:00
Vivek Gautam
24a4775f91 usb: ehci: exynos: Fix multiple FDT decode
With current FDT support driver tries to parse device node
twice in ehci_hcd_init() and ehci_hcd_stop(), which shouldn't
happen ideally.
Making provision to store data in a global structure and thereby
passing its pointer when needed.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
2013-03-18 18:58:53 +01:00
Lukasz Majewski
b528f71394 usb:gadget: USB Mass Storage Gadget support
This patch adds the USB Mass Storage Gadget to u-boot
New command called "ums" is implemented to provide access
to on-device embedded persistent memory.

USB Mass Storage is supposed to work on top of the USB
Gadget framework

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18 18:58:53 +01:00
Piotr Wilczek
b4d36f6809 usb:composite: USB Mass Storage - f_mass_storage.c from Linux kernel
The f_mass_storage.c source file from v2.6.36 Linux kernel.

commit 8876f5e7d3b2a320777dd4f6f5301d474c97a06c
Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date:   Mon Jun 21 13:57:09 2010 +0200

USB: gadget: f_mass_storage: added eject callback

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18 18:58:53 +01:00
Lukasz Majewski
dee1d99973 usb:composite: USB Mass Storage - storage_common.c from Linux kernel
The storage_common.c source file from v2.6.36 Linux kernel.

commit d26a6aa08b9f12b44fb1ee65625e7480d3d5bb81
Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
Date:   Mon Nov 9 14:15:23 2009 +0100

USB: g_mass_storage: code cleaned up and comments updated

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Marek Vasut <marek.vasut@gmail.com>
2013-03-18 18:58:53 +01:00
Lukasz Majewski
f7b4162eb1 usb:composite:fix Provide function data when addressing device with only one interface
This commit fixes problems with some non-standard requests send with
device address instead of interface address (bmRequestType.Receipent field).

This happens with dfu-util (debian version: 0.5), which address non standard
requests (like w_value=0x21 and bRequest=GET_DESCRIPTOR) to device.
Without this fix, the above request is STALLED, and hence causes dfu-util
to assume some standard configuration (packet size = 1024B instead of 4096B)
In turn it displays following errors:
Error obtaining DFU functional descriptor
Warning: Assuming DFU version 1.0
Warning: Transfer size can not be detected
...
Warning: Trying default transfer size 1024

This fix allows passing non-standard request to function setup code, where
it shall be handled.

Tested at: 	Trats (exynos4210)
Tested with:DFU and UMS gadgets

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-18 18:58:52 +01:00
Vipin Kumar
39fd6342a4 usb/host/ehci: Add support for EHCI on spear
Add EHCI support for spear boards

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
2013-03-16 21:12:02 +01:00
Pantelis Antoniou
a04983d6a9 usb: Fix bug when both DFU & ETHER are defined
When both CONFIG_USB_GADGET & CONFIG_USB_ETHER are defined
the makefile links objects twice.

This patch uses a Makefile specific idiom of
'if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)'
to handle the case.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16 21:12:02 +01:00
Pantelis Antoniou
80eb1bd02d dfu: Properly zero out timeout value
Zero out timeout value; letting it filled with undefined values
ends up with the dfu host hanging.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-03-16 21:12:01 +01:00
Vincent Palatin
2982837e36 usb: ehci: Add 64-bit controller support
On EHCI controller with 64-bit address space support, we must initialize
properly the high word for the PCI bus master accesses.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-16 21:12:01 +01:00
Vincent Palatin
7c38e90aff usb: ehci: generic PCI support
Instead of hardcoding the PCI IDs on the USB controller, use the PCI
class to detect them.

Ensure the busmaster bit is properly set in the PCI configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-16 21:12:01 +01:00
Albert ARIBAUD
b27673ccbd Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' 2013-03-15 20:50:43 +01:00
Lucas Stach
d7a55e1a4b tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
The ehci_hcd entry points were just calling into the Tegra USB
functions. Now that they are in the same file we can just move over the
implementation.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-03-14 11:06:41 -07:00
Lucas Stach
7ae18f3725 tegra: usb: move implementation into right directory
This moves the Tegra USB implementation into the drivers/usb/host
directory. Note that this merges the old
/arch/arm/cpu/armv7/tegra20/usb.c file into ehci-tegra.c. No code
changes, just moving stuff around.

v2: While at it also move some defines and the usb.h header file to make
usb driver usable for Tegra30.
NOTE: A lot more work is required to properly init the PHYs and PLL_U on
Tegra30, this is just to make porting easier and it does no harm here.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-03-14 11:06:41 -07:00
Marek Vasut
afa8721099 mxs: Make ehci-mxs multiport capable
Rework ehci-mxs so it supports both ports on MX28. It was necessary
to wrap the per-port configuration into struct ehci_mxs_port and pull
out the clock configuration function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
2013-03-07 17:22:57 +01:00
Marek Vasut
47f1331506 mxs: Squash the header file usage in ehci-mxs
The ehci-mxs driver included the register definitions directly.
Use imx-regs.h instead since it contains proper handling of the
differences between mx23 and mx28.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-03-07 17:22:57 +01:00
Stefano Babic
62db0b3d62 USB: drop unneeded header in ehci-mx6
Including header for pads is not needed and breaks board
after renaming pin definitions.

Series-to: u-boot

Series-cc: marex@denx.de,fabio.estevam@freescale.com,eric.nelson@boundarydevices.com

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-03-07 16:43:47 +01:00
Albert ARIBAUD
1199c377cf Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2013-01-14 15:21:00 +01:00
Tom Rini
7a8e739cd5 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-01-11 14:38:24 -07:00
Albert ARIBAUD
612404c28a Merge 'u-boot-atmel/master' into 'u-boot-arm/master' 2013-01-09 20:01:48 +01:00
Rajeshwari Shinde
e18bf1f9f2 EHCI: Exynos: Add fdt support
Adding fdt support to ehci-exynos in order to parse
register base addresses from the device node.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-08 21:14:34 +09:00
Tom Rini
da77a0e593 Merge branch 'master' of git://git.denx.de/u-boot-arm 2012-12-22 05:55:19 -07:00
Pantelis Antoniou
598cf6062e g_dnl: Properly terminate string list.
Well, not terminating the list causes very interesting crashes.
As in changing the vendor & product ID crashes. Fun.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2012-12-17 15:38:15 +01:00
Pantelis Antoniou
5a413cae6a g_dnl: Issue connect/disconnect as appropriate
Call usb_gadget_connect/usb_gadget_disconnect in g_dnl_bind/g_dnl_unbind.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2012-12-17 15:38:15 +01:00
Lukasz Dalek
27460be60d pxa25x_udc: Remove usbdescriptors.h
usbdescriptors.h conflicts with linux/usb/ch9.h.
Remove it.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-12-17 15:38:14 +01:00
Minkyu Kang
2c601c7208 Merge branch 'master' of git://git.denx.de/u-boot into resolve
Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h
2012-12-10 14:13:27 +09:00
Richard Genoud
bcfc8976e5 at91sam9x5: enable USB support for 9x5ek board.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-12-09 22:38:27 +01:00
Pantelis Antoniou
66dc452bfe Remove obsolete header file
usbdescriptors.h conflicts with linux/usb/ch9.h
Remove it.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2012-11-27 09:41:10 -07:00
Nobuhiro Iwamatsu
7bae844f2d usb: r8a6659: Fix build by missing of parenthesis
By commit c7e3b2b5, this was chanded to support multiple controllers.
But this has missing of parenthesis. This commit fix it.

-----
r8a66597-hcd.c: In function ‘usb_lowlevel_init’:
r8a66597-hcd.c:911:52: error: expected declaration specifiers before ‘)’
token
r8a66597-hcd.c:935:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or‘__attribute__’ before ‘{’ token
r8a66597-hcd.c:939:1: error: expected ‘{’ at end of input
-----

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Lucas Stach <dev@lynxeye.de>
2012-11-20 00:16:08 +01:00
Nobuhiro Iwamatsu
9d034208a8 usb: r8a66597: Switched from variable to only macro
Some variables are initialized with a value defined by macro.
This was changed to use the macro directly. And the variable not to
use deleted it.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-11-20 00:16:08 +01:00
Ilya Yanok
673a524b6a musb-new: omap2plus backend driver
Backend driver for MUSB OTG controllers found on TI OMAP2/3/4
(tested only on OMAP3 Beagle).

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:08 +01:00
Ilya Yanok
833a53c627 musb-new: am35x backend driver
Backend driver for MUSB OTG controllers found on TI AM35x.

It seems that on AM35X interrupt status registers can be updated
_before_ core registers. As we don't use true interrupts in U-Boot
and poll interrupt status registers instead this can result in
interrupt handler being called with non-updated core registers.
This confuses the code and result in hanged transfers.
Add a small delay in am35x_interrupt as a workaround.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:07 +01:00
Ilya Yanok
37931f02c2 musb-new: dsps backend driver
Backend driver for MUSB OTG controllers found on TI AM33xx and
TI81xx SoCs (tested with AM33xx only).

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:06 +01:00
Ilya Yanok
eb81955bf0 musb-new: port of Linux musb driver
Existing U-Boot musb driver has no support for the new gadget framework
and also seems to have other limitations. As gadget framework is ported
from Linux it seems pretty natural to port musb gadget driver as well.

This driver supports both host and peripheral modes.

This is not a replacement for current musb driver (at least now) as
there are still some consumers of the old UDC interface.

No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be
defined.

Virtual root hub device is not implemented.

Known problems: with no devices connected usb_lowlevel_start() fails.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:06 +01:00
Ilya Yanok
c60795f41d usb: use linux/usb/ch9.h instead of usbdescriptors.h
Linux usb/ch9.h seems to have all the same information (and more)
as usbdescriptors.h so use the former instead of the later one.

As a consequense of this change USB_SPEED_* values don't correspond
directly to EHCI speed encoding anymore, I've added necessary
recoding in EHCI driver. Also there is no point to put speed into
pipe anymore so it's removed and a bunch of host drivers fixed to
look at usb_device->speed instead.

Old usbdescriptors.h included is not removed as it seems to be
used by old USB device code.

This makes usb.h and usbdevice.h incompatible. Fortunately the
only place that tries to include both are the old MUSB code and
it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute
on musb_regs structure but this attribute seems to be unneeded
(old MUSB code doesn't support any DMA at all).

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:06 +01:00
Ilya Yanok
82651c39f6 linux/usb/ch9.h: update with the version from Linux tree
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:06 +01:00
Benoît Thébaudeau
fa88ddb75f ehci-mxc: Fix host power mask bit for i.MX25
The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Eric Bénard <eric@eukrea.com> and fixed by
Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s
had been copied.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
2012-11-19 08:49:02 +01:00
Benoît Thébaudeau
ed0a6fcff9 ehci-mxc: Fix host power mask bit for i.MX35
The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance
selection bit.

This issue has been reported by Michael Burkey <mdburkey@gmail.com> and fixed by
Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s
had been copied.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-11-19 08:49:00 +01:00
Benoît Thébaudeau
f22e4fae19 ehci-mx5/6: Make board_ehci_hcd_init() optional
A custom board_ehci_hcd_init() may be unneeded, so add a weak default
implementation doing nothing.

By the way, use simple __weak from linux/compiler.h for
board_ehci_hcd_postinit() instead of weak alias with full attribute.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:46 +01:00
Benoît Thébaudeau
71a5c55bfa ehci-mxc: Add support for i.MX35
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:45 +01:00
Benoît Thébaudeau
34d33b671a ehci-mxc: Define host offsets
Some MXC SoCs like the i.MX35 have hosts located at unusual offsets, so prepare
to the introduction of i.MX35 support by defining the ehci-mxc hosts offsets at
SoC level.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:45 +01:00
Benoît Thébaudeau
9fa3d093d6 ehci-mxc: Make i.MX25 EHCI configurable
Use EHCI MXC configuration options for i.MX25.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matthias Weisser <weisserm@arcor.de>
2012-11-16 09:16:45 +01:00
Benoît Thébaudeau
31ac2d0c6a ehci-mxc: Make EHCI power/oc polarities configurable
Make EHCI power and overcurrent polarities configurable. If not set, these new
configurartions keep the default register values so that existing board files
do not have to be changed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:45 +01:00
Benoît Thébaudeau
2cfe0b8f13 ehci-mx5: Add missing OC_DIS for i.MX53
The i.MX53 has MXC_H*_UCTRL_H*_OC_DIS_BIT bits to disable the oc pin.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:44 +01:00
Benoît Thébaudeau
661052f476 ehci-mx5: Fix *PM usage for i.MX53
The MXC_*_UCTRL_*PM_BIT bits are available only on i.MX51.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:44 +01:00
Benoît Thébaudeau
394c00dcfc ehci-mx5: Fix OPM usage
MXC_OTG_UCTRL_OPM_BIT disables (masks) the power/oc pins if set, like
MXC_H1_UCTRL_H1PM_BIT and MXC_H2_UCTRL_H2PM_BIT, not the opposite.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:44 +01:00
Benoît Thébaudeau
7d42432d38 ehci-mx5: Fix OC_DIS usage
MXC_OTG_PHYCTRL_OC_DIS_BIT disables the oc pin if set, like MXC_H1_OC_DIS_BIT,
not the opposite.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:44 +01:00
Benoît Thébaudeau
bdc5202068 ehci-mx5: Clean up
Clean up ehci-mx5:
 - Fix column alignments.
 - Fix comments.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:44 +01:00
Benoît Thébaudeau
164738e940 ehci-mxc: Clean up
Clean up ehci-mxc:
 - Remove useless #if's.
 - Fix identation.
 - Issue a #error if used with an unsupported platform.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-16 09:16:44 +01:00
Tom Rini
57a87a25f7 usb gadget ether: Fix warning in is_eth_addr_valid()
The gadget ethernet driver needs to keep copies of the MAC address (at
both endpoints) as strings so it needs a custom function for validation
of the MAC.  It was not however performing a totally correct check and
also was emitting a warning about a set but unused variable.  The
solution to both is that after checking the string contents we use the
standard test for a valid MAC.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-11-04 11:00:38 -07:00
Albert ARIBAUD
c68436fa42 Merge remote-tracking branch 'u-boot-ti/master' 2012-10-26 07:00:28 +02:00
Pankaj Bharadiya
3f0be8ea92 USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY
The endpoint rx count register value will be zero if it is read before
receive packet ready bit (PERI_RXCSR:RXPKTRDY) is set.

Check for the receive packet ready bit (PERI_RXCSR:RXPKTRDY) before
reading endpoint rx count register. Proceed with rx count read and
FIFO read only if RXPKTRDY bit is set.

Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-23 08:33:17 -07:00
Shengzhou Liu
047cea3655 powerpc/usb: fix bug of CPU hang when missing USB PHY clock
when missing USB PHY clock, u-boot will hang during USB
initialization when issuing "usb start". We should check
USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case.

Due to controller issue of PHY_CLK_VALID in ULPI mode, we set
USB_EN before checking PHY_CLK_VALID, otherwise PHY_CLK_VALID
doesn't work.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-10-22 08:25:12 +02:00
Marek Vasut
fb24ffc086 dm: Move s3c24xx USB driver to a proper place
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David Müller <d.mueller@elsoft.ch>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
2012-10-18 06:54:18 +02:00
Albert ARIBAUD
b9f4bc34ac Remove lh7a40x cpu and serial driver
Since commit 957731ed (ARM: remove broken "lpd7a40x" boards),
lh7a40x cpu and serial driver have become unused. Remove them.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-10-16 18:00:36 +02:00
Benoît Thébaudeau
414e1660c8 mx51: Fix USB PHY clocks
The i.MX51 has a single USB PHY clock, while the i.MX53 has two. These 3 clocks
have different clock gate control bit-fields.

The existing code was correct only for i.MX53, so this patch fixes the i.MX51
use case.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Jana Rapava <fermata7@gmail.com>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
2012-10-15 11:54:11 -07:00
Lukasz Dalek
3c09a2836d pxa25x: Add support for USB ethernet gadget
Add to pxa25x based devices support for USB ethernet gadget. This is a
port of pxa25x UDC driver from Linux kernel.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
2bb378841e usbether: Removed DEV_CONFIG_{CDC,SUBSET}
Removed DEV_CONFIG_CDC and DEV_CONFIG_SUBSET and replaced it with
CONFIG_USB_ETH_CDC and CONFIG_USB_ETH_SUBSET.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
4c43cd5a63 usbether: Define CONFIG_USB_ETH_{CDC,SUBSET}
Introduced CONFIG_USB_ETH_CDC and CONFIG_USB_ETH_SUBSET as preparation
for removal DEV_CONFIG_CDC and DEV_CONFIG_SUBSET

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
563aed2539 usbether: Fixed bug when using with PXA25X chips
PXA25X chips don't support alternate settings so driver uses non-CDC
driver.
But only code defined between DEV_CONFIG_CDC signals that network is up.
This patch is fixing this bug by signaling that network is up after USB
SET_INTERFACE request.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lucas Stach
141288b3a3 usb: ulpi: add indicator configuration function
Allows for easy configuration of the VBUS indicator related ULPI
config bits.

Also move the external indicator setup from ulpi_set_vbus() to
the new function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-10-15 11:54:01 -07:00
Lucas Stach
7a46b2c7f2 usb: ehci: don't print debug output
This is clearly some sort of debug output and should not
be printed during normal operation.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
a896211ff1 tegra20: port to new ehci interface
EHCI interface now supports more than one controller. Wire up our usb functions
to use this new interface.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
93c2582fea usb: add support for multiple usb controllers
Allows to initialize more than one USB controller at once.

v2: print message when controller stop fails

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
676ae068d9 usb: ehci: rework to take advantage of new lowlevel interface
Kill off ehci-core.h
It was used to specify some static controller data. To support more than
one controller being active at any time we have to carry the controller
data ourselfes. Change the ehci interface accordingly.

NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed
to do the same thing as other platforms. But the change for now is at least
compile clean.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
c7e3b2b586 usb: lowlevel interface change to support multiple controllers
Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
1dff9d0f54 net: asix: add AX88772B support
Add AX88772B ID together with two fixes needed to make this work.

1. The packet length check has to be adjusted, as all ASIX chips
only use 11 bits to indicate the length. AX88772B uses the other
bits to indicate unrelated things, which cause the check to fail.
This fix is based on a fix for the Linux kernel by Marek Vasut.
Linux upstream commit: bca0beb9363f8487ac902931a50eb00180a2d14a

2. AX88772B provides several bulk endpoints. Only the first
IN/OUT endpoints work in the default configuration. So stop
enumeration after we found them to avoid overwriting the
endpoint config with a non-working one.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-26 12:36:31 -05:00
Lucas Stach
02c8d8cc6e net: asix: add read_mac function
Initial device MAC should be read while getting info about the
device, so it's wrong to only read it in asix_init().

Add a dedicated function to read the initial MAC, which is also
able to handle devices that have their initial MAC stored in
EEPROM. Call this function inasix_eth_get_info().

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-26 12:36:31 -05:00
Lucas Stach
58f8fab8a4 net: asix: add write_hwaddr function
All ASIX chipsets aside from AX88172 are able to set the MAC
address on the hardware level. Add a function to expose this
ability.

To differentiate between chip types we now carry flags as driver
private data. Also while touching the asix_dongles array
constify this.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-26 12:36:30 -05:00
Lucas Stach
5fae53d0f1 net: asix: split out basic reset function
The basic device reset ensures that the device is ready to
service commands and does not need to get redone before each
network operation.

Split out the basic reset from asix_init() and instead call it
from asix_eth_get_info(), so that it only gets called once.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-26 12:36:30 -05:00
Lucas Stach
e1dbdf9109 net: introduce transparent driver private in ueth_data
Avoid clutter in ueth_data. Individual drivers should not mess
with structures belonging to the core like this.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2012-09-26 12:36:29 -05:00
Lucas Stach
93ad908c43 usb: do explicit unaligned accesses
usb_hub_descriptor has to be packed as it's used for
communication with the device. Member wHubCharacteristics
violates the natural alignment rules.

Use explicit unaligned access functions for this member.
Fixes ARMv7 traping while using USB.

v2: fix typo found by Thomas Langer

v3: rebased on top of u-boot-usb/master

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-09-21 00:05:00 +02:00
Wolfgang Denk
7cdcaef0b2 Merge branch 'master' of git://git.denx.de/u-boot-usb
* 'master' of git://git.denx.de/u-boot-usb:
  MUSB driver: Timeout is never detected as the while loop does not end
  usb: fix ulpi_set_vbus prototype
  pxa25x: Add UDC registers definitions
  USB: Fix strict aliasing in ohci-hcd
  usb: Optimize USB storage read/write
  ehci: Optimize qTD allocations
  usb_stor_BBB_transport: Do not delay when not required
  usb_storage: Remove EHCI constraints
  usb_storage: Restore non-EHCI support
  ehci-hcd: Boost transfer speed
  ehci: cosmetic: Define used constants
  ehci: Fail for multi-transaction interrupt transfers
  arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
  arm:trats: Support for USB UDC driver at TRATS board.
  dfu:cmd: Support for DFU u-boot command
  dfu: MMC specific routines for DFU operation
  dfu: DFU backend implementation
  dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
  dfu:usb: Support for g_dnl composite download gadget.
  ehci: cosmetic: Define the number of qt_buffers

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-02 16:38:48 +02:00
Matej Frančeškin
8c86501819 MUSB driver: Timeout is never detected as the while loop does not end
Timeout variable is decremented once more when while condition is not met.
Following "if" does not detect correctly that timeout has occurred.
Because of this bug the "usb start" command on AM335X-EVM board did not detect correctly that USB device was not attached.

	timeout = musb_cfg.timeout;
	while (timeout--)
		if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
 			break;
	/* if musb core is not in host mode, then return */
	if (!timeout)
		return -1;

Signed-off-by: Matej Franceskin <Matej.Franceskin@comtrade.com>
CC: Marek Vasut <matex@denx.de>?
2012-09-01 16:21:53 +02:00
Troy Kisky
f1273f1143 USB: Fix strict aliasing in ohci-hcd
commit 5f6aa03fda
    USB: Fix complaints about strict aliasing in OHCI-HCD

tried to fix this, but gcc4.4 still complains. So, this
patch basically reverts the above and does a simpler fix.

also, the above commit incorrectly changed
	/* corresponds to data_buf[4-7] */
	datab [1] = 0;
to

	/* corresponds to databuf.u8[4-7] */
	databuf.u8[1] = 0;

This patch also fixes that.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-09-01 16:21:53 +02:00
Benoît Thébaudeau
db19134615 ehci: Optimize qTD allocations
Relax the qTD transfer alignment constraints in order to need less qTDs for
buffers that are aligned to 512 bytes but not to pages.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2012-09-01 16:21:52 +02:00
Benoît Thébaudeau
5cec214ecd ehci-hcd: Boost transfer speed
This patch takes advantage of the hardware EHCI qTD queuing mechanism to avoid
software and transfer splitting overhead so as to make transfers as fast as
possible.

The only drawback is a call to memalign. However, this is fast compared to the
transfer timings, and the heap size to allocate is small, e.g. 128 kiB in the
worst case for a transfer length of 65535 packets of 512 bytes.

Tested on i.MX25, i.MX35 and i.MX51. In my test conditions, the speed gain was
very significant (several times faster), which is really appreciable when
accessing large files.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2012-09-01 16:21:52 +02:00
Benoît Thébaudeau
14eb79b7a0 ehci: cosmetic: Define used constants
Make some light cosmetic code cleanup by the way.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2012-09-01 16:21:51 +02:00
Benoît Thébaudeau
44ae0be746 ehci: Fail for multi-transaction interrupt transfers
Interrupt transfers requiring several transactions are not supported by
submit_int_msg() because bInterval is ignored. This patch returns a failure code
and prints an error message in this case.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2012-09-01 16:21:51 +02:00
Lukasz Majewski
b819ddbf56 dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Support for f_dfu USB function.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-09-01 16:21:50 +02:00
Lukasz Majewski
1d4a0b6c00 dfu:usb: Support for g_dnl composite download gadget.
Composite USB download gadget support (g_dnl) for download functions.
This code works on top of composite gadget.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-09-01 16:21:50 +02:00
Benoît Thébaudeau
cdeb916120 ehci: cosmetic: Define the number of qt_buffers
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
2012-09-01 16:21:50 +02:00
Otavio Salvador
af963ba8f4 mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
The CLKCTRL registers are SoC specific so we ought to have it clear on
filename.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:25 +02:00
Sughosh Ganu
25f8bf6eff da8xx/hawkboard: Add support for ohci host controller
Also enable the ohci port on hawkboard. These additions result in an
increased u-boot size -- adjust the same accordingly in the board's
config.

Move the usb header for da8xx platforms under arch-davinci.

Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
2012-09-01 14:58:19 +02:00
Otavio Salvador
9c471142bc mxs: prefix register structs with 'mxs' prefix
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:17 +02:00
Otavio Salvador
ddcf13b152 mxs: prefix register acessor macros with 'mxs' prefix
As the register accessing mode is the same for all i.MXS SoCs we ought
to use 'mxs' prefix intead of 'mx28'.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:17 +02:00
Troy Kisky
af2a35fb1f i.mx: iomux-v3.h: move to imx-common include directory
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-07-31 08:00:19 +02:00
Wolfgang Denk
b98b611502 Merge branch 'next' of git://git.denx.de/u-boot
* 'next' of git://git.denx.de/u-boot:
  MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
  doc: cleanup - move board READMEs into respective board directories
  net: sh_eth: add support for SH7757's GETHER
  net: sh_eth: modify the definitions of regsiter
  net: sh_eth: add SH_ETH_TYPE_ condition
  net: sh_eth: clean up for the SH7757's code
  net: fec_mxc: Fix MDC for xMII
  net: fec_mxc: Fix setting of RCR for xMII
  net: nfs: make NFS_TIMEOUT configurable
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-30 20:39:52 +02:00
Ilya Yanok
e3b31c8d75 smsc95xx: align buffers to cache line size
Align buffers passed to the USB code to cache line size so
they can be DMAed safely.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:42 +02:00
Ilya Yanok
2af16f85f1 ehci-hcd: change debug() to printf() in case of errors
Printing message could be useful if something goes really wrong.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:42 +02:00
Ilya Yanok
189a6956eb ehci-hcd: fix external buffer cache handling
Buffer coming from upper layers should be cacheline aligned/padded
to perform safe cache operations. For now we don't do bounce
buffering so getting unaligned buffer is an upper layer error.
We can't check if the buffer is properly padded with current
interface so just assume it is (consider changing with in the
future). The following changes are done:

1. Remove useless length alignment check. We get actual transfer
length not the size of the underlying buffer so it's perfectly
valid for it to be unaligned.
2. Move flush_dcache_range() out of while loop or it will
flush too much.
3. Don't try to fix buffer address before calling invalidate:
if it's unaligned it's an error anyway so let cache subsystem
cry about that.
4. Fix end buffer address to be cacheline aligned assuming upper
layer reserved enough space. This is potentially dangerous
operation so upper layers should be careful about that.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:42 +02:00
Tom Rini
71c5de4f4a ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
The USB spec says that 32 bytes is the minimum required alignment.
However on some platforms we have a larger minimum requirement for cache
coherency.  In those cases, use that value rather than the USB spec
minimum.  We add a cpp check to <usb.h> to define USB_DMA_MINALIGN and
make use of it in ehci-hcd.c and musb_core.h.  We cannot use MAX() here
as we are not allowed to have tests inside of align(...).

Signed-off-by: Tom Rini <trini@ti.com>
[marek.vasut]: introduce some crazy macro voodoo
Signed-off-by: Marek Vasut <marex@denx.de>
[ilya.yanok]: moved external buffer fixes to separate patch,
we use {ALLOC,DEFINE}_ALIGN_BUFFER macros with alignment of USB_DMA_MINALIGN
for qh_list, qh and qtd structures to make sure they are proper aligned
for both controller and cache operations.
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:29 +02:00
Ilya Yanok
c7701af59f ehci-hcd: program asynclistaddr before every transfer
Move or_asynclistaddr programming to ehci_submit_async()
function to make sure queue head is properly programmed
before every transfer. This solves the problem with changing
qh address.

Also remove unneeded qh_list->qh_link reprogramming at the
end of transfer.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:29 +02:00
Tom Rini
eec3866e00 ehci-omap: Do not call dcache_off from omap_ehci_hcd_init
This has never been completely sufficient and now happens too late to
paper over the cache coherency problems with the current USB stack.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:14 +02:00
Marek Vasut
c59ab0921f CACHE: net: asix: Fix asix driver to work with data cache on
The asix driver did not align buffers, therefore it didn't work
with data cache enabled. Fix this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2012-07-11 13:15:31 -05:00
Wolfgang Denk
895f3e0542 Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  tegra: define fdt_load/fdt_high variables
  tegra: enable bootz command
  tegra: usb: Fix device enumeration problem of USB1
  tegra: trimslice: set up serial flash pinmux
  tegra: add pin_mux_spi() board initialization function
  tegra: add GMC/GMD funcmux entry for SFLASH
  tegra: bootcmd: start USB only when needed
  tegra: bootcmd enhancements
  tegra: add enterrcm command
  tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
  Add env vars describing U-Boot target board
  tegra: usb: fix wrong error check
  tegra: add ULPI on USB2 funcmux entry
  tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
  tegra: Add Tamonten Evaluation Carrier support
  tegra: Use SD write-protect GPIO on Tamonten
  tegra: Implement gpio_early_init() on Tamonten
  tegra: Allow boards to perform early GPIO setup
  tegra: plutux: Add device tree support
  tegra: medcom: Add device tree support
  tegra: Rework Tamonten support
  beagle: add eeprom expansion board info for bct brettl4

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-10 08:54:41 +02:00
Jim Lin
8b3f7bf7ec tegra: usb: Fix device enumeration problem of USB1
A known hardware issue of USB1 port where bit 1 (connect status
change) of PORTSC register will be set after issuing Port Reset
(like "usb reset" in u-boot command line).
This will be treated as an error and stops later device enumeration.

Therefore we clear that bit after Port Reset in order to proceed
later device enumeration.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-09 22:44:34 +02:00
Rajeshwari Shinde
c48ac11322 EXYNOS: Add power Enable/Disable for USB-EHCI
This patch adds functions to enable/disable the power of USB
host controller for EXYNOS5.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-07-09 18:27:55 +02:00
Rajeshwari Shinde
71045da812 USB: EXYNOS: Set USB 2.0 HOST Link mode
This patch adds a function to set usb host mode to USB 2.0 HOST Link
for EXYNOS5

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-07-09 18:27:55 +02:00
Rajeshwari Shinde
7590d3cece USB: EXYNOS: Incorporate EHCI review comments
This patch incorates the review comments given by Minkyu Kang for
EHCI support on EXYNOS

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-07-09 18:27:54 +02:00
Andreas Bießmann
81f40345d1 ehci-atmel: fix compiler warning
Commit 7a101e946cba55e32d3d1265e30456c810046da3 introduced following warning:
---8<---
ehci-atmel.c: In function 'ehci_hcd_init':
ehci-atmel.c:49:2: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses]
ehci-atmel.c: In function 'ehci_hcd_stop':
ehci-atmel.c:79:2: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses]
--->8---

This patch fixes it.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Bo Shen <voice.shen@atmel.com>
cc: Marek Vasut <marex@denx.de>
2012-07-07 14:07:30 +02:00
Bo Shen
cc30b7803d Atmel : usb : add EHCI driver for Atmel SoC
Some Atmel SoC support USB EHCI, add the EHCI driver to support it.

To enable the USB EHCI, add the following configuration options into
board relative configuration file and remove USB OHCI options.

    #define CONFIG_USB_EHCI
    #define CONFIG_USB_EHCI_ATMEL
    #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-07-07 14:07:29 +02:00
Joe Hershberger
10cbe3b6a4 net: Fix remaining API interface breakage
These are all the files which use the API incorrectly but did not get
built using MAKEALL -a powerpc|arm.  I have no compiler for them, but
the remaining issues should be far less than without this patch.

Any outstanding issues are left to the maintainers of boards that use
these drivers.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 14:19:21 -05:00
Anatolij Gustschin
e14826bc8d drivers/usb/eth/asix.c: Fix build warning
Fix:
asix.c: In function 'asix_eth_get_info':
asix.c:629:12: warning: assignment from incompatible pointer type

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-05-22 10:18:14 -05:00
Anatolij Gustschin
92ec210d31 drivers/usb/eth/smsc95xx.c: Fix GCC 4.6 warning
Fix:
smsc95xx.c: In function 'smsc95xx_eth_get_info':
smsc95xx.c:869:12: warning: assignment from incompatible pointer type
[enabled by default]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-05-22 10:18:13 -05:00
Wolfgang Denk
2ab5be7af0 Merge branch 'master' of git://git.denx.de/u-boot-usb
* 'master' of git://git.denx.de/u-boot-usb:
  USB: S5P: Add ehci support
  usb:udc:samsung Add functions for storing private gadget data in UDC driver
  usb:gadget:composite: Support for composite at gadget.h
  usb:gadget:composite USB composite gadget support
  usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls
  usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file
  USB: Document the QH and qTD antics in EHCI-HCD
  USB: Drop cache flush bloat in EHCI-HCD
  USB: Drop ehci_alloc/ehci_free in ehci-hcd
  USB: Align buffers at cacheline
  usb: use noinline define
2012-05-20 22:51:41 +02:00
Rajeshwari Shinde
5f0ffea455 USB: S5P: Add ehci support
This patch adds ehci driver support for s5p.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-05-20 08:32:33 +02:00
Lukasz Majewski
6734b6b234 usb:udc:samsung Add functions for storing private gadget data in UDC driver
This commit adds support for storing private data to Samsung's UDC
driver. This data is afterward used by usb gadget.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-05-20 08:32:33 +02:00
Lukasz Majewski
7010f5b94f usb:gadget:composite USB composite gadget support
USB Composite gadget implementation for u-boot. It builds on top
of USB UDC drivers.

This commit is based on following files from Linux Kernel v2.6.36:

./include/linux/usb/composite.h
./drivers/usb/gadget/composite.c

SHA1: d187abb9a83e6c6b6e9f2ca17962bdeafb4bc903

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-05-20 08:32:33 +02:00
Lukasz Majewski
f3b05ca533 usb:udc:samsung:cleanup Replace DEBUG_* macros with debug_cond() calls
This patch cleans up the Samsung's UDC driver. It replaces several
DEBUG_* macros with debug_cond().

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-05-20 08:32:33 +02:00
Lukasz Majewski
b9300531c1 usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h file
Remove the repeated USB descriptor code and use usbdescriptors.h file.
ch9.h file has been copied from linux and is needed for USB gadget
related work.
Now usbdescriptors.h and ch9.h shall be used together.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-05-20 08:32:32 +02:00
Marek Vasut
41b1f0ac2e USB: Document the QH and qTD antics in EHCI-HCD
The construction of QH and qTD lists in ehci_submit_async() call is cryptic
business, add at least a bit of comments so if someone is reading it, he can at
least reference the intel ehci manual (ehci-r10.pdf).

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2012-05-20 08:32:32 +02:00
Marek Vasut
b8adb12095 USB: Drop cache flush bloat in EHCI-HCD
Discard the creepy cache flushing mechanisms in ehci-hcd.c and replace them with
more straightforward flushing. In the new approach, the flushing takes place
directly in ehci_submit_async() call instead of going through the QH list and
flushing all members and buffers. This discards a lot of weird bit operations
on the members of QH and qTD structures.

NOTE: Certainly, this flushes even qTDs which are possibly unused in some
transactions, though the overhead of the previous code was much higher than is
the overhead of flushing two more cache lines (which most probably aren't even
cached).

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2012-05-20 08:32:32 +02:00
Marek Vasut
de98e8b22a USB: Drop ehci_alloc/ehci_free in ehci-hcd
These two functions were called only from ehci_submit_async(), therefore
dissolve them as part of ehci_submit_async() to get rid of all those static
variables.

Signed-off-by: Marek Vasut <marex@denx.de>
2012-05-20 08:32:32 +02:00
Timo Ketola
5614553d56 imx: usb: There is no such register
The reference manual of i.MX25 (nor i.MX31) does not define such
register. This seems to access read only UH2_CAPLENGTH register (if
CONFIG_MXC_USB_PORT is zero).

Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:34 +02:00
Timo Ketola
45b460dab3 i.MX25: usb: Set PORTSCx register
The USB controller in i.MX25 has a PORTSCx registers which should be
set. In this regard it is similar to the controller in i.MX31. As this
file is compiled only with i.MX25 and -31, #ifdef check can be removed.

Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:34 +02:00
Wolfgang Grandegger
3f29d96218 USB: ehci-mx6: Fix broken IO access
To get USB working again on the i.MX6, this patch fixes a bug introduced
with commit 522b2a0 "Add proper IO accessors for mx6 usb registers.".
At that occasion, I also added the missing __iomem directive.

Cc: Marek Vasut <marex@denx.de>
CC: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2012-05-15 08:31:33 +02:00
Mike Frysinger
6777a3cf73 lin_gadget: use common linux/compat.h
Merge our duplicate definitions with the common header.

Also fix drivers/usb/gadget/s3c_udc_otg_xfer_dma.c to
use min() instead of min_t() since we remove the latter
from compat.h.

Additionally use memalign() directly as the lin_gadget
specific kmalloc() macro is removed from lin_gadget_compat.h
by this patch.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
2012-04-30 16:54:51 +02:00
Jeroen Hofstee
90579fdd41 ehci-omap: fix for enabling the correct usb port
This is just a patch for the problem reported here:
http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.

"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass
 for port2/3 rather its port1 set in bypass mode)"

I only submit the patch since it is missing in 2012.04-rc3 while the twister board
depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.

note: the twister boards still needs an additional `usb reset`, don't know why.

U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)

AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz
TAM3517 TWISTER Board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0
In:    serial
Out:   serial
Err:   serial
Die ID #746c0000000000000155dc1405011024
Net:   DaVinci-EMAC, smc911x-0
Hit any key to stop autoboot:  0
twister => usb start
(Re)start USB...
USB:   Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
twister => usb reset
(Re)start USB...
USB:   Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
twister => usb reset
(Re)start USB...
USB:   Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
twister => usb reset
(Re)start USB...
USB:   Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found

Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: Govindraj.R <govindraj.raja <at> ti.com>
Acked-by: Tom Rini <trini@ti.com>
2012-04-21 16:58:02 +02:00
Wolfgang Denk
f5cdc11775 Prepare v2012.04-rc2; minor Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-04-16 23:13:51 +02:00
Wolfgang Denk
a7ed871b72 Merge branch 'master' of git://git.denx.de/u-boot-usb
* 'master' of git://git.denx.de/u-boot-usb:
  Enable high speed support for USB device framework and usbtty
2012-03-30 23:56:04 +02:00
Simon Glass
87f938c9f7 tegra: usb: Add support for Tegra USB peripheral
This adds basic support for the Tegra2 USB controller. Board files should
call board_usb_init() to set things up.

Configuration is performed through the FDT, with aliases used to set the
order of the ports, like this fragment:

        aliases {
		/* This defines the order of our USB ports */
                usb0 = "/usb@0xc5008000";
                usb1 = "/usb@0xc5000000";
        };

drivers/usb/host files ONLY: Acked-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-03-29 08:12:48 +02:00
Simon Glass
9ab4ce223c usb: Add support for txfifo threshold
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning
field in the EHCI controller on reset.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-03-29 08:12:48 +02:00
Vipin KUMAR
f9da0f8943 Enable high speed support for USB device framework and usbtty
This patch adds the support for high speed in usb device framework and usbtty
driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board
configuration files have to define this macro to enable high speed support.

Along with that specific peripheral drivers also need to define a function to
let the framework know that the enumeration has happened at high speed.
This function prototype is "int is_usbd_high_speed(void)"

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
2012-03-28 16:31:08 +02:00
Fabio Estevam
522b2a02e6 USB: ehci-mx6: Add proper IO accessors
Add proper IO accessors for mx6 usb registers.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Jason Liu <r64343@freescale.com>
2012-03-27 09:41:16 +02:00
Robert Delien
b228e14e96 Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
This patch renames mx28_register to mx28_register_32 in order to
prepare for the introduction of an 8-bit register, mx28_register_8.

Signed-off-by: Robert Delien <robert@delien.nl>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
2012-03-26 23:09:24 +02:00
Wolfgang Grandegger
3f467529ca usb/ehci: Add USB support for the MX6Q
Currently, only USB Host 1 is supported.

Cc: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2012-03-26 23:09:23 +02:00
Ajay Bhargav
54cb00486e USB: Armada100: EHCI Driver for Armada100 SOCs
This patch adds support for USB EHCI driver for Armada100 SOCs.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2012-03-19 00:08:26 +01:00
Ajay Bhargav
732c7c2446 USB: Armada100: Add UTMI PHY interface driver
This patch adds USB host controller's UTMI PHY interface driver for
Armada100 SOCs.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2012-03-19 00:08:26 +01:00
Łukasz Majewski
7cf7beffaf usb:udc:samsung:fix Remove the req_config flag
The dev->req_config flag was indicating that the forwarded
request needs to perform the usb gadget delayed status.
This is however not needed anymore, so it can be removed.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2012-03-19 00:08:25 +01:00
Shiraz Hashim
f50dcd60a0 USB:gadget:designware Fix memory nonalignment issue
While receiving packets from FIFO sometimes the buffer provided was
nonaligned. Fix this by taking a temporary aligned buffer and then
copying the content to nonaligned buffer.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
2012-03-19 00:08:17 +01:00
Amit Virdi
4df4f3c9a2 USB:gadget:designware Make locally used functions static
Signed-off-by: Amit Virdi <amit.virdi@st.com>
2012-03-19 00:08:17 +01:00
Vipin KUMAR
23b0e6946b USB:gadget:designware Support high speed
This patch adds the support for usb device high speed for designware peripheral.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
2012-03-19 00:08:17 +01:00
Vipin KUMAR
dc3e773918 USB:gadget:designware Device controller bugfixes
This patch fixes a few bugs in USB device controller driver.
The fixes are as follows
1. Adding error condition checks eg. NULL return
2. Endpoint other than endpoint 0 (control endpoint) are initialized
only if usb state machine reaches STATE_ADDRESSED or above
3. Zero length packet handling corrected
4. Dead code removed
5. Bulk out endpoint returns after servicing 1 interrupt and returns
back to service if more interrupts are pending

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-03-19 00:08:17 +01:00
Vipin KUMAR
2721551a11 USB:gadget:designware USB device controller (UDC) implementation
The earlier usb device controller driver was specific to spear platforms. This
patch implements the usb device controller driver as a generic controller which
can be reused by other platforms using this peripheral.

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
Acked-by: Marek Vasut <marex@denx.de>
2012-03-19 00:08:16 +01:00
Mike Frysinger
5b84dd67cf usb: replace wait_ms() with mdelay()
Common code has a mdelay() func, so use that instead of the usb-specific
wait_ms() func.  This also fixes the build errors:

ohci-hcd.c: In function 'submit_common_msg':
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1519:9: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1816:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1827:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1844:10: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1563:11: sorry, unimplemented: called from here
/usr/local/src/u-boot/blackfin/include/usb.h:202:44: sorry, unimplemented: inlining failed in call to 'wait_ms': function body not available
ohci-hcd.c:1583:9: sorry, unimplemented: called from here
make[1]: *** [ohci-hcd.o] Error 1

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Marek Vasut <marex@denx.de>
2012-03-19 00:08:16 +01:00
Mike Frysinger
b974308105 usb: musb: fix printf warning
musb_hcd.c: In function 'musb_submit_rh_msg':
musb_hcd.c:827:2: warning: format '%d' expects type 'int',
	but argument 3 has type 'long unsigned int'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-19 00:08:16 +01:00
amartin@nvidia.com
f9636e8d38 USB: move keyboard polling into kbd driver
This moves keyboard polling logic from USB HCD drivers into USB
keyboard driver.  Remove usb_event_poll() as keyboard polling was
the only user of this API.  With this patch USB keyboard works with
EHCI controllers again.  Tested on a tegra2 seaboard.

Signed-off-by: Allen Martin <amartin@nvidia.com>
2012-03-03 16:56:29 +01:00
Vincent Palatin
e7e982d69c eth: remove usb-ethernet devices before re-enumerating them
Fix the crash when running several times usb_init() with a USB ethernet
device plugged.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Tested-by: Wolfgang Grandegger <wg@denx.de>
2012-03-03 16:56:04 +01:00
Peter Meerwald
d1f862f97e usb_ether: fix typo
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-02-14 11:02:46 -07:00
Govindraj.R
43b62393da ehci-omap: Clean up added ehci-omap.c
Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for usb ops as ehci will use
internally dma for all usb ops.

* Add a generic common header ehci-omap.h having common ip block
  data and reg shifts.
* Rename and modify ehci-omap3 to ehci.h retain only conflicting
  sysc reg shifts remove others and move to common header file.
* pass the board data for beagle/panda accordinly to use
  ehci ports.

Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
2012-02-12 10:11:31 +01:00
Ilya Yanok
29321c0518 ehci-omap: driver for EHCI host on OMAP3
Taken from Beagle code. Tested on mcx board (AM3517-based).

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Tested-by: Stefano Babic <sbabic@denx.de>
2012-02-12 10:11:30 +01:00
Govindraj.R
928c4bdf9b usb: ulpi: Add omap-ulpi-view port support
Based on discussion from this thread [1].
Adding omap-view port that helps us in using the generic ulpi
framework for any ulpi phy ops using the INSNREG05_ULPI viewport
reg available on omap platform.

Currently ehci ports are available on omap3/4 platforms so enable the same
for beagle and panda, patch is tested on the same boards.

Thanks to Igor Grinberg <grinberg@compulab.co.il> for reviewing the
omap-ehci patches and suggesting this approach.

[1]: http://www.mail-archive.com/u-boot@lists.denx.de/msg76076.html

Tested-by: Stefano Babic <sbabic@denx.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
2012-02-12 10:11:30 +01:00
Govindraj.R
3e6e809f56 usb: ulpi: Extend the existing ulpi framework.
Extend the existing ulpi viewport framework
to pass the port number information for any ulpi
ops. Fix the usage of ulpi api's accordingly.

Tested-by: Stefano Babic <sbabic@denx.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
2012-02-12 10:11:30 +01:00
Albert ARIBAUD
805ad7ee2d orion5x: add USB host ehci-marvell support
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-02-12 10:11:28 +01:00
Albert ARIBAUD
74d3442111 Remove kirkwood-specifics from marvell EHCI driver
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-02-12 10:11:27 +01:00
Albert ARIBAUD
a14bd41738 Rename ehci-kirkwood as ehci-marvell
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2012-02-12 10:11:27 +01:00
Anatolij Gustschin
ea2d915974 usb: s3c_udc_otg: fix GCC 4.6 build warnings
Fix:
In file included from s3c_udc_otg.c:216:0:
s3c_udc_otg_xfer_dma.c: In function 'complete_tx':
s3c_udc_otg_xfer_dma.c:280:33: warning: variable 'is_short' set but not used
s3c_udc_otg_xfer_dma.c:280:6: warning: variable 'ep_tsr' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_udc_irq':
s3c_udc_otg_xfer_dma.c:469:16: warning: variable 'flags' set but not used
s3c_udc_otg_xfer_dma.c:468:18: warning: variable 'gintmsk' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_queue':
s3c_udc_otg_xfer_dma.c:582:14: warning: variable 'gintsts' set but not used
s3c_udc_otg_xfer_dma.c:581:16: warning: variable 'flags' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_read':
s3c_udc_otg_xfer_dma.c:778:6: warning: variable 'ret' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_udc_set_halt':
s3c_udc_otg_xfer_dma.c:1020:16: warning: variable 'flags' set but not used
s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_setup':
s3c_udc_otg_xfer_dma.c:1258:13: warning: initialization from incompatible
pointer type [enabled by default]
s3c_udc_otg_xfer_dma.c:1239:16: warning: variable 'is_in' set but not used
s3c_udc_otg_xfer_dma.c:1239:9: warning: variable 'bytes' set but not used
s3c_udc_otg.c: In function 'usb_gadget_register_driver':
s3c_udc_otg.c:292:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 'usb_gadget_unregister_driver':
s3c_udc_otg.c:338:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 's3c_ep_enable':
s3c_udc_otg.c:582:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 's3c_ep_disable':
s3c_udc_otg.c:646:16: warning: variable 'flags' set but not used
s3c_udc_otg.c: In function 's3c_dequeue':
s3c_udc_otg.c:704:16: warning: variable 'flags' set but not used

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Remy Bohmer <linux@bohmer.net>
2011-12-20 23:20:01 +01:00
Wolfgang Denk
6b62b9a31d Coding Style cleanup
Fix trailing white space, indentation by spaces instead of TABs,
excessive blank lines, trailing blank lines.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-19 12:03:40 +01:00
Wolfgang Denk
10879aa21c drivers/usb/gadget/pxa27x_udc.c: Coding Style cleanup
Commit bdbcdc89 "pxa: convert pxa27x_udc to use read and write
functions" added a number of C++ comments.  Fix these.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-19 11:52:36 +01:00
Tom Rini
b2fb47f187 USB: Use (get|put)_unaligned for accessing wMaxPacketSize
In 9792987721 Stefan describes a usecase
where the previous behavior of leaving wMaxPacketSize be unaligned
caused fatal problems.  The initial fix for this problem was incomplete
however as it showed another cases of non-aligned access that previously
worked implicitly.  This switches to making sure that all access of
wMaxPacketSize are done via (get|put)_unaligned.

In order to maintain a level of readability to the code in some cases
we now use a variable for the value of wMaxPacketSize and in others, a
macro.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Remy Bohmer <linux@bohmer.net>

OpenRISC:
Tested-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>

Beagleboard xM, Pandaboard run-tested, s5p_goni build-tested.
Signed-off-by: Tom Rini <trini@ti.com>
2011-12-16 21:37:17 +01:00
Igor Grinberg
cf9f95f293 USB: ULPI: increase error case verbosity
Add the argument value to the error message.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Simon Glass <sjg@chromium.org>
2011-12-16 21:05:46 +01:00
Igor Grinberg
4256101f8c USB: ULPI: clean a mixup of return types
Clean a mixup between u32 and int as a return type
for functions returning error values.
Use int as it is native (and widely used) return type.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Simon Glass <sjg@chromium.org>
2011-12-16 21:03:37 +01:00
Igor Grinberg
1113a79b2a USB: ULPI: switch argument type from u8 to unsigned
There is no benefit in using u8, so switch to unsigned to reduce the
binary image size (by 20 bytes).

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Simon Glass <sjg@chromium.org>
2011-12-16 21:00:23 +01:00
Jana Rapava
f93022c3b1 USB: Add generic ULPI layer and a viewport
Add partial ULPI specification implementation that should be enough to
interface the ULPI PHYs in the boot loader context.
Add a viewport implementation for Chipidea/ARC based controllers.

Signed-off-by: Jana Rapava <fermata7@gmail.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2011-12-11 14:50:09 +01:00
Marek Vasut
3874b6d674 USB: EHCI: Allow EHCI post-powerup configuration in board files
This patch allows USB to work on some hosts, which need additional frobing after
the host was powered up via regular USB powerup sequence.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
2011-12-11 14:50:03 +01:00
Marek Vasut
1b80f2706e USB: MX5: Add MX5 usb post-init callback
This is useful for USB Transceivers init etc.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
2011-12-11 14:49:43 +01:00
Marek Vasut
0f8c86b549 USB: MX5: Abstract out mx51 USB pixmux configuration
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
2011-12-11 14:49:37 +01:00
Wolfgang Grandegger
1ca5620253 USB: MX5: add generic USB EHCI support for mx51 and mx53
It's derived from ehci-mxc and uses the header files of the
ehci-fsl interface. The callback board_ehci_hcd_init() has
been introduced to allow for board-specific setup when USB
is started.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
CC: Stefano Babic <sbabic@denx.de>
CC: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:49:31 +01:00
Lukasz Majewski
38517a7821 usb:gadget:s5p USB Device Controller (UDC) implementation
This commit provides UDC driver support for Samsung's SoC
family of processors.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:44:40 +01:00
Vincent Palatin
5f4b4f2fed ehci: speed up initialization
According to EHCI specification v1.0, the controller should stabilize
the power on a port at most 20 ms after the port power bit transition.
So, we put this setting in the virtual descriptor corresponding field,
(bPwrOn2PwrGood = 10 => 10 x 2ms = 20ms), this saves about 500ms at each
controller initialization/enumeration.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
2011-12-11 14:42:57 +01:00
Stefan Herbrechtsmeier
bdbcdc897f pxa: convert pxa27x_udc to use read and write functions
Signed-off-by: Stefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Remy Bohmer  <linux@bohmer.net>
2011-12-11 14:41:14 +01:00
Marek Vasut
7555d5ec29 USB: Add usb_event_poll() to get keyboards working with EHCI
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:40:38 +01:00
Lei Wen
26cc5129ee USB: gadaget: add Marvell controller support
Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-12-11 14:40:38 +01:00
Marek Vasut
5f6aa03fda USB: Fix complaints about strict aliasing in OHCI-HCD
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-11 14:40:38 +01:00