Commit graph

14156 commits

Author SHA1 Message Date
Michael Walle
82a3c9ef20 net: use the same alias stem for ethernet as linux
Linux uses the prefix "ethernet" whereas u-boot uses "eth". This is from
the linux tree:

$ grep "eth[0-9].*=.*&" arch/**/*dts{,i}|wc -l
0
$ grep "ethernet[0-9].*=.*&" arch/**/*dts{,i}|wc -l
633

In u-boot device trees both prefixes are used. Until recently the only
user of the ethernet alias was the sandbox test device tree. This
changed with commit fc054d563b ("net: Introduce DSA class for Ethernet
switches"). There, the MAC addresses are inherited based on the devices
sequence IDs which is in turn given by the device tree.

Before there are more users in u-boot and both worlds will differ even
more, rename the alias prefix to "ethernet" to match the linux ones.
Also adapt the test cases and rename any old aliases in the u-boot
device trees.

Cc: David Wu <david.wu@rock-chips.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-18 11:29:17 +03:00
Tom Rini
a298d4fbcd Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release,
  mmc, usb, env, etc for Layerscape boards
- powerpc: Update Maintainers for some boards.
2021-06-17 08:44:56 -04:00
Ran Wang
390c73b417 armv8: Update erratum number to align with doc
Change the USB erratum number A-050106 to A-050204 as A-050106 is
a duplicate and never be published.

Fixes 0cfa00cdb9 (“armv8: Add workaround for USB erratum A-050106”)
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Aleksandar Gerasimovski
a7fd6fa1c2 board/km: add support for expu1 design based on nxp
The EXPU1 design is a new 40G capable ethernet service unit card for
Hitachi-Powergrids wired-com product lines.

The base SoC is same as for already added SELI8 card, consequently the
already added u-boot support for SELI8 is reused.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
[Fixed new line error at EOF]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Lasse Klok Mikkelsen
fb6c96f14e arm: dts: ls1021a.dtsi: Fix invalid reg on gpio nodes
Address and size cells on SOC are set to 1. But gpio nodes are specified
with 2 cells. This fixes the gpio nodes to correct cells.

Signed-off-by: Lasse Klok Mikkelsen <lkmi@prevas.dk>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Yangbo Lu
38d1a18750 arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1
Add properties related to eMMC HS400 mode for esdhc1.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Chaitanya Sakinam
ff64e9a9f0 armv8: ls1012a: Pass PPFE firmware to Linux through FDT
Read Linux PPFE firmware from flash partition and pass it to Linux through
FDT entry. So that we can avoid placing PPFE firmware in Linux rootfs.
(FDT may increase at max by 64KB)

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Yangbo Lu
addec3511f armv8: layerscape: enable eMMC HS400 workarounds for LX2160A/LX2162A
Enable eMMC HS400 workarounds for LX2160A/LX2162A.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Jiafei Pan
84c2e044a9 armv8: layerscape: add PSCI support for cpu release
For cpu release command, check whether PSCI is supported firstly,
if supported, use PSCI to kick off secondary cores, otherwise still
use spin table.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
[Fixed checkpatch alignment CHECKs]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Tom Rini
b2c4b7f665 u-boot-imx-20210616
-------------------
 
 - imxrt : fixes, USB, imxrt1020-evk
 - imx8m:
 	fix for verdin-imx8mm
 	Add conga-QMX8 board
 - imx6 :
 	documentation for pico-imx6:
 	Add SeeedStudio NPI-IMX6ULL Support
 	ventana: DM PCI
 - imx7d:
 	added SMEGW01 board
 
 CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYMoTAg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aaXgCfa0IWXD0nOT0xQ50aKZGD3fspahsAn3rfnviv
 HnrT4j7bdBRksuYJ15PR
 =NEGm
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210616' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210616
-------------------

- imxrt : fixes, USB, imxrt1020-evk
- imx8m:
	fix for verdin-imx8mm
	Add conga-QMX8 board
- imx6 :
	documentation for pico-imx6:
	Add SeeedStudio NPI-IMX6ULL Support
	ventana: DM PCI
- imx7d:
	added SMEGW01 board

CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765
2021-06-16 11:18:11 -04:00
Michael Walle
2bf4658b8c board: sl28: fix RGMII clock and voltage
It was noticed that the clock isn't continuously enabled when there is
no link. This is because the 125MHz clock is derived from the internal
PLL which seems to go into some kind of power-down mode every once in a
while. The LS1028A expects a contiuous clock. Thus enable the PLL all
the time.

Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is
the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO
regulator.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-16 18:14:08 +05:30
Tom Rini
c4737cd594 Xilinx changes for v2021.07-rc5
zynqmp:
 - Fix ANALOG_BUS value after powerup
 - Disable EFI_CAPSULE_ON_DISK_EARLY
 
 zynqmp-gqspi:
 - Fix write issue
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYMNGPAAKCRDKSWXLKUoM
 IUCCAJ4lktDK3MTBAJUMHzKXvzt1jcuW6wCfQKuoQSETBDuy1LMXV6uxQXkrHJA=
 =IXXl
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07-rc5' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.07-rc5

zynqmp:
- Fix ANALOG_BUS value after powerup
- Disable EFI_CAPSULE_ON_DISK_EARLY

zynqmp-gqspi:
- Fix write issue
2021-06-11 08:29:34 -04:00
Adrian Fiergolski
3414712ba8 arm64: zynqmp: Writing correct value to ANALOG_BUS
The default register configuration after powerup for PSSYSMON_ANALOG_BUS
register is incorrect. Hence, fix this in SPL by writing correct fixed
value. It follows UG1085 chapter 'PS SYSMON Analog_Bus' and reflects commit
sw_apps:zynq ("056ca65d44549ce27f716d423e8dfdefeee7440c")
in Xilinx:embeddedsw[1].

[1] https://github.com/Xilinx/embeddedsw

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-11 09:24:58 +02:00
Marek Behún
f221333400 arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions
Add nodes for SPI NOR partitions to the device tree of Turris MOX, as
are in Linux' device tree.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10 07:18:06 +02:00
Marek Behún
e04bf43681 arm: mvebu: dts: turris_mox: add button and LED nodes
Add nodes for indicator LED and reset button so that board code can
implement board factory reset mechanism.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10 07:18:06 +02:00
Fabio Estevam
40496ac3b7 mx7d: Add Storopack's SMEGW01 board
Add support for Storopack's SMEGW01 board, which is an
IoT gateway based on the i.MX7D SoC.

Based on the original U-Boot work done by Phytec.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-09 13:34:38 +02:00
Navin Sankar Velliangiri
a3a0bc85c0 imx: Add SeeedStudio NPI-IMX6ULL Support
CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 49C
Reset cause: POR
Model: Seeed NPi iMX6ULL Dev Board with NAND
Board: Seeed NPi i.MX6ULL Dev Board
DRAM:  512 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   FEC0

Working:
- Eth0
- MMC/SD
- NAND
- UART 1
- USB host

Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com>

Note:

Changes in v2:

 * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file.
 * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09 13:34:18 +02:00
Oliver Graute
fe133eb192 imx: support for conga-QMX8 board
Add i.MX8QM qmx8 congatec board support

U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Congatec QMX8 Qseven series
Board: conga-QMX8
Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9
Boot:  SD2
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
switch to partitions #0, OK
mmc2 is current device
Net:
Error: ethernet@5b040000 address not set.
No ethernet found.

Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09 13:34:09 +02:00
Andrey Zhizhikin
6ac4d44806 arm: imx: imx8mm: correct unrecognized fracpll frequency
Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ()
macro, which expands the value provided to the Hz range without taking into
account the precise Hz setting. This causes the frequency of 266 MHz not ot
be found in the imx8mm_fracpll_tbl, since it is entered there with a
precise Hz value. This in turn causes the boot hang in SPL, as proper DDR
fracpll frequency cannot be determined.

Correct the value in imx8mm_fracpll_tbl to match the one expanded by
MHZ(266) macro, rounding it down to MHz range only.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Fixes: 825ab6b406 ("driver: ddr: Refine the ddr init driver on imx8m")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09 13:34:01 +02:00
Tim Harvey
cd18f1e6e6 imx: ventana: enable dm support for PCI and FEC ethernet
Enable driver model support for FEC ethernet which allows us to remove
the iomux and board_eth_init function. Replace the toggling of the ethernet
phy reset with dt configuration.

Enable driver model support for PCI which allows us to remove the
eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for
PCI devices on init such as the e1000 that is present on the GW552x.

Convert board_pci_fixup to use dm callback and remove pcidisable env
variable which is not supported for DM_PCI and thus leave PCI always
enabled during init.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-09 13:33:35 +02:00
Andrey Zhizhikin
d9a7f1a913 arm: imx: imx8mm: clock: make debug output more descriptive
Clock initialization functionality has ambitious debug messages, which are
printed out when failures are triggered during execution:
- Separate frequency table lookup functions have the the same output that
  makes it impossible to understand which function failed and produced the
  output
- PLL decoding routine has a generic debug statement printed, which does
  not state the actual value failed to be found

Extend the output for both cases with prefixing table lookup functions
output with function name, and report the failed value in PLL decoding
routine.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09 13:33:26 +02:00
Oleh Kravchenko
1180baec98 Add EV-iMX280-NANO-X-MB board
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:49 +02:00
Oleh Kravchenko
3675ac081a Add out4.ru O4-iMX-NANO board
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:42 +02:00
Giulio Benetti
42b967216e ARM: dts: imxrt1050-evk: enable usbotg1 node as host
Enable usbotg1 port node as host usb.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:04:00 +02:00
Giulio Benetti
9b91484a89 ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodes
Usb is now supported so add all required nodes for it in imxrt1050.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:03:54 +02:00
Giulio Benetti
e7e81e8959 usb: ehci-mx6: add support for i.MXRT
Add support for usb1 and usb2 present on i.IMXRT.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:03:47 +02:00
Giulio Benetti
0d90dec182 ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev()
We need those macros to instruct drivers on how to behave for SoC specific
quirks, so let's add it as done for other i.MX SoCs.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:03:33 +02:00
Giulio Benetti
d7308dbd86 ARM: dts: imxrt1020: add gpio5 node to this SoC
i.MXRT1020 supports gpio5, so let's add a node for it.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:03:26 +02:00
Giulio Benetti
dc54f82901 ARM: dts: imxrt1020-evk: move all u-boot, dm-spl to imxrt1020-evk-u-boot.dtsi file
At the moment a lot of u-boot,dm-spl properties are present in board .dts
file but this is not correct since u-boot,dm-spl property is u-boot
specific and must be listed into the separate imrt1020-evk-u-boot.dtsi
file. So let's move every u-boot,dm-spl property present in
imxrt1020-evk.dts to imxrt1020-evk-u-boot.dtsi file.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:03:19 +02:00
Giulio Benetti
1f3555d906 ARM: dts: imxrt1050-evk: move all u-boot, dm-spl to imxrt1050-evk-u-boot.dtsi file
At the moment a lot of u-boot,dm-spl properties are present in board .dts
file but this is not correct since u-boot,dm-spl property is u-boot
specific and must be listed into the separate imrt1050-evk-u-boot.dtsi
file. So let's move every u-boot,dm-spl property present in
imxrt1050-evk.dts to imxrt1050-evk-u-boot.dtsi file.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:03:08 +02:00
Giulio Benetti
31f0e58527 ARM: dts: imxrt1050-evk: remove u-boot,dm-spl
We don't need lcdif to be enable in SPL, so let's remove u-boot,dm-spl.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
a9a5c33d57 ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver
Lcdif needs both "pix" and "axi" clocks to be enabled so let's add them to
lcdif node.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
f2d91e606b ARM: dts: imxrt1050: move lcdif assigned clock to dtsi
Since we assume pll5 is the default lcdif clock source let's move
assigned-clocks(-parents) properties to .dtsi file.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
6f6f03af0e ARM: dts: imxrt1050-evk: add device_type = "memory" to memory node
Now device_type = "memory" is mandatory to allow u-boot to read memory
node, so let's add it to memory node.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
0684ec8a9d ARM: dts: imxrt1050-evk-u-boot: make gpt1 present for SPL
Timer needs to be already enabled in spl, so let's add its node to spl dtb.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
7892f3eba1 ARM: dts: imxrt1050-evk: set gpt1 as tick-timer for u-boot
Let's set gpt1 as u-boot timer.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
7eacc427bb ARM: dts: imxrt1050-evk: enable gpt1 timer
Enable gpt1 timer.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
5790db9283 ARM: dts: imxrt1050: add gpt1 node
Add gpt1 node for using it as timer.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
6cd7a9b850 ARM: dts: imxrt1050: add node label to osc
Let's add node label to osc to be used as clock source for other nodes.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
d956990c69 ARM: dts: imxrt1020-evk: add device_type = "memory" to memory node
Now device_type = "memory" is mandatory to allow u-boot to read memory
node, so let's add it to memory node.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
faa4e95b5c ARM: dts: imxrt1020-evk-u-boot: make gpt1 present for SPL
Timer needs to be already enabled in spl, so let's add its node to spl dtb.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
e5d10f4442 ARM: dts: imxrt1020-evk: set gpt1 as tick-timer for u-boot
Let's set gpt1 as u-boot timer.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
bc4944051e ARM: dts: imxrt1020-evk: enable gpt1 timer
Enable gpt1 timer.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
df243c93d3 ARM: dts: imxrt1020: add gpt1 node
Add gpt1 node for using it as timer.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
bfdbe871a0 ARM: dts: imxrt1020: add node label to osc
Let's add node label to osc to be used as clock source for other nodes.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Giulio Benetti
55ad612306 arm: imxrt: soc: make mpu regions generic
This mpu handling works for every i.MXRT SoC that we have, so let's
generalize imxrt1050_region_config to imxrt_region_config.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09 13:01:33 +02:00
Pali Rohár
079b35a261 arm: a37xx: pci: Increase PCIe MEM size from 16 MiB to 127 MiB
For some configurations with more PCIe cards and PCIe bridges, 16 MiB of
PCIe MEM space may not be enough. Since TF-A already allocates a 128 MiB
CPU window for PCIe, and since IO port space is only 64 KiB in total,
use all the remaining space (64 + 32 + 16 + 8 + 4 + 2 + 1 = 127 MiB) for
PCIe MEM.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04 11:32:41 +02:00
Pali Rohár
4a82fca8e3 arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function
Current version of this function uses a lot of incorrect assumptions about
the `ranges` DT property:

 * parent(#address-cells) == 2
 * #size-cells == 2
 * number of entries == 2
 * address size of first entry == 0x1000000
 * second child address entry == base + 0x1000000

Trying to increase PCIe MEM space to more than 16 MiB leads to an overlap
with PCIe IO space, and trying to define additional MEM space (as a third
entry in the `ranges` DT property) causes U-Boot to crash when booting the
kernel.

  ## Flattened Device Tree blob at 04f00000
     Booting using the fdt blob at 0x4f00000
     Loading Device Tree to 000000001fb01000, end 000000001fb08f12 ... OK
  ERROR: board-specific fdt fixup failed: <unknown error>
   - must RESET the board to recover.

Fix a3700_fdt_fix_pcie_regions() to properly parse and update all addresses
in the `ranges` property according to
https://elinux.org/Device_Tree_Usage#PCI_Address_Translation

Now it is possible to increase PCIe MEM space from 16 MiB to maximal value
of 127 MiB.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Fixes: cb2ddb291e ("arm64: mvebu: a37xx: add device-tree fixer for PCIe regions")
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04 11:32:41 +02:00
Pali Rohár
46b679e3ec arm: a37xx: pci: Find PCIe controller node by compatible instead of path
Find PCIe DT node by compatible string instead of retrieving it by using
hardcoded DT path.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04 11:32:41 +02:00
Pali Rohár
a544d65f1d arm: a37xx: pci: Fix DT compatible string to Linux' DT compatible
Change DT compatible string for A3700 PCIe from 'marvell,armada-37xx-pcie'
to 'marvell,armada-3700-pcie' to make U-Boot A3700 PCIe DT node compatible
with Linux' DT node.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-04 11:32:41 +02:00