2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-29 06:23:07 +00:00
Commit graph

2652 commits

Author SHA1 Message Date
Biwen Li
164941c2c4 net: pfe_eth: read PFE ESBC header flash with spi_flash_read API
Read PFE ESBC header flash with spi_flash_read API
- logs as follows,
  Net:   SF: Detected s25fs512s with page size 256 Bytes, erase size 256
  KiB, total 64 MiB
  "Synchronous Abort" handler, esr 0x96000210
  elr: 000000008206db44 lr : 0000000082004ea0 (reloc)
  elr: 00000000b7ba6b44 lr : 00000000b7b3dea0
  x0 : 00000000b79407e8 x1 : 0000000040640000
  x2 : 0000000000000050 x3 : 0000000000000000
  x4 : 000000000000000a x5 : 0000000000000050
  x6 : 0000000000000366 x7 : 00000000b7942308
  x8 : 00000000b76407c0 x9 : 0000000000000008
  x10: 0000000000000044 x11: 00000000b7634d1c
  x12: 000000000000004f x13: 0000000000000044
  x14: 00000000b7634d98 x15: 00000000b76407c0
  x16: 0000000000000000 x17: 0000000000000000
  x18: 00000000b7636dd8 x19: 0000000000000000
  x20: 00000000b79407d0 x21: 00000000b79407e8
  x22: 0000000040640000 x23: 00000000b7634e58
  x24: 0000000000000000 x25: 0000000003800000
  x26: 00000000b7bdd000 x27: 0000000000000000
  x28: 0000000000000000 x29: 00000000b7634d10

  Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826)
  Resetting CPU ...

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Madalin Bucur
848a2efd14 board: freescale: powerpc: add support for all RGMII modes
Make sure all RGMII internal delay modes are covered.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Madalin Bucur
ccedd4ff8e armv8: ls1043/ls1046aqds: add support for all RGMII modes
Make sure all RGMII internal delay modes are covered.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Priyanka Singh
f6cb837721 board: freescale: vid.c: Initialize variable 'i2caddress'
Initialize variable 'i2caddress' in adjust_vdd() to zero

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Biwen Li
e343ae7c96 board/freescale/common: fix a bug that failed to read/write eeprom on ls1021atsn
Fix a bug that failed to read/write eeprom on ls1021atsn

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
9ed303dfa9 armv8: lx2162aqds: Add support for LX2162AQDS platform
This patch add base support for LX2162AQDS board.
LX2162AQDS board supports LX2162A family SoCs.
This patch add basic support of platform.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: hui.song <hui.song_1@nxp.com>
Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
3a187cff7a armv8: lx2162a: Add Soc changes to support LX2162A
LX2162 is LX2160 based SoC, it has same die as of LX2160
with different packaging.

LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module,
microSD card, eMMC support, serial console, qspi nor flash, qsgmii,
sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes
interface to support three PCIe gen3 interface.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Fixed whitespace errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Peng Fan
9a1b96f1d8 doc: board: Convert i.MX6ULL EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
20337b75a7 doc: board: Convert i.MX6UL 14x14 EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
4fa2635876 doc: board: Convert i.MX6 Sabresd README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
a133a7fa8f doc: board: Convert i.MX6 Sabreauto README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
9de1712d16 doc: board: Convert i.MXRT1050 EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
e66be2d7e6 doc: board: Convert i.MXRT1020 EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
21f747c845 doc: board: Convert i.MX8QXP MEK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
c155f33037 doc: board: Convert i.MX8MQ EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
50ce1bff52 doc: board: Convert i.MX8MM EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
2f9119d579 doc: board: Convert i.MX8MN EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
39d53414ad doc: board: Convert i.MX8MP EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Peng Fan
aa5bbfd961 board: imx: address dd usage in README
When using cygwin64 "dd (coreutils) 8.26 Packaged by Cygwin (8.26-2)",
the last not 512bytes aligned data wat cut off and not burned into SD
card.

Saying the flash.bin size is 1085608 bytes, not 512bytes aligned. It only
burned 1085440 bytes, the leaving 168 bytes were not burnned and cause
boot issue.

So update README dd command to add "conv=notrunc"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-11-01 15:37:19 +01:00
Biwen Li
026703174a board/freescale/vid: enables writes to all commands for LTC3882
Enable writes to all commands for LTC3882

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Priyanka Singh
f3555bd285 board: freescale: vid.c: Initialize variable 'i2caddress'
Initialize variable 'i2caddress' in print_vdd() to zero

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Tom Rini
b7e7831e5d Merge branch 'next'
Bring in the assorted changes that have been staged in the 'next' branch
prior to release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 14:10:59 -04:00
Wasim Khan
c63edbc750 board: freescale: emc2305: Pass chip_addr to set_fan_speed
emc2305 is a common driver. It should not use platform specific
i2c address for slave device.
Pass chip_addr as agrument to emc2305_init() and set_fan_speed()
so that emc2305 driver can be used with different platforms.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 20:57:32 +05:30
Martin Kaistra
ada19fd2d2 board/freescale/lsch3: Correct entry for 0.9v
According to the reference manual of LS2088A, for a VDD voltage of
0.9V, the entry should be at 01000b.

Fixes: 4911948ec7 ("board/freescale,lsch3: Add entry for 0.9v")
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 20:57:32 +05:30
Priyanka Jain
8e01439dd3 board/freescale: Remove P5020DS board support
Remove NXP powerpc P5020DS board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
d975f6a693 powerpc:Remove P4080DS secure boot configs
Remove NXP powerpc P4080DS secure boot configs as they are
no longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
c2dee50ec0 configs: Remove P3041DS secure boot configs
Remove NXP powerpc P3041DS secure boot configs as they are
no longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
63310debc9 board/freescale: Remove P1024RDB board support
Remove NXP powerpc P1024RDB board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
6d1dd76afe board/freescale: Remove P1021RDB board support
Remove NXP powerpc P1021RDB board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
53e3096cd0 board/freescale: Remove P1020MBG board support
Remove NXP powerpc P1020MBG board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
da3dd417d7 board/freescale: Remove P1020UTM board support
Remove NXP powerpc P1020UTM board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
d521cece5a board/freescale: Remove P1025RDB board support
Remove NXP powerpc P1025RDB board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
fd7331ed0d configs: Remove P1010RDB secure boot configs
Remove NXP powerpc P1010RDB secure boot configs as they are
no longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Priyanka Jain
20b1ae018f board/freescale: Remove p1023rdb board support
Remove NXP powerpc p1023rdb board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
c5166ceb13 p1010rdb: Don't compile board_eth_init() for DM_ETH
The board_eth_init() is only used by legacy ethernet driver framework,
so do not compile it when DM_ETH config has been selected.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
dfd4dfb289 p1_p2_rdb: Don't compile board_eth_init() for DM_ETH
The board_eth_init() is only used by legacy ethernet driver framework,
so do not compile it when DM_ETH config has been selected.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Hou Zhiqiang
ae24d75867 fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()
Move vsc7835 firmware uploading to board_early_init_r(), so that
the switch also can work in DM eTSEC driver.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 08:27:44 -04:00
Stefan Roese
e516404ee5 powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Most likely these deprecated (removed) variables are not needed. Lets
remove the assignments completely from all spl.c files.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Oleksandr Zhadan and Michael Durrant
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-26 09:19:54 +02:00
Manish Tomar
11504cf584 configs:ls1046afrwy: Add tfa secure boot defonfig
Add TFA secure boot defconfig and Enables secure boot related
configs in it.

Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:23:57 +05:30
Biwen Li
3bb30b9c76 freescale: ls1043aqds: drop ifdef CONFIG_SYS_I2C
- Drop ifdef CONFIG_SYS_I2C to initialize
  baudrate of i2c

- Drop warning of i2c_early_init_f as follows,
  warning: implicit declaration of function 'i2c_early_init_f'; did you
  mean 'arch_early_init_r'? [-Wimplicit-function-declaration]

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
1b2bdd0605 freescale: ls1043aqds: enable secure system counter
Enable secure system counter in board_early_init_f for udelay()
to fix a bug that always return 0 by timer_read_counter()
when boot from qspi(No TFA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
51d893cd3d freescale: ls1046aqds: drop ifdef CONFIG_SYS_I2C
- Drop ifdef CONFIG_SYS_I2C to initialize
  baudrate of i2c

- Drop warning of i2c_early_init_f as follows,
  warning: implicit declaration of function 'i2c_early_init_f'; did you
  mean 'arch_early_init_r'? [-Wimplicit-function-declaration]

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Biwen Li
e70e10bc49 freescale: ls1046aqds: enable secure system counter
Enable secure system counter in board_early_init_f for udelay()
to fix a bug that always return 0 by timer_read_counter()
when boot from qspi(No TFA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:29 +05:30
Yangbo Lu
e1a31034a6 board: fsl: lx2160aqds: identify SDHC adapter during board init
Add support for SDHC adapter identification and configuration
during board init.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Yangbo Lu
39913acedd Move eSDHC adapter card identification to board files
The eSDHC adapter card identification and multiplexing configuration
through FPGA had been implemented in both common mmc driver and
fsl_esdhc driver. However it is proper to move these code to board
files and do it during board initialization. The FPGA registers are
also board specific.

This patch is to move eSDHC adapter card identification and
multiplexing configuration from mmc driver to specific board files.
And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[Rebased, Removed T1040QDS change as board does not exist]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Yuantian Tang
c8f8830e0b armv8: ls1028ardb: add xspi parameter to qixis command
Add xspi boot source to qixis command to let the soc boot from
flex-nor flash chip.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Chaitanya Sakinam
cb1de6067a armv8: ls1012a: RGMII ports require internal delay
The correct setting for the RGMII ports on LS1012ARDB is to
enable delay on both Rx and Tx so the interface mode used should
be PHY_INTERFACE_MODE_RGMII_ID

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:16:28 +05:30
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Sébastien Szymanski
eefd93e7f8 power: pmic_pca9450: fix PCA9450A I2C address
Quoting Ye Li from NXP:

    "We have confirmed with PMIC team, 0x35 is used only on early chips
    and not used any more. 0x25 is the final address."

Fix it by merging power_pca9450a_init and power_pca9450b_init into one
function power_pca9450_init.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2020-07-16 11:20:14 +02:00
Peng Fan
3c41728d80 imx8m: Refactor the OPTEE memory removal
Current codes assume the OPTEE address is at the end of first DRAM bank.
Adjust the process to allow OPTEE in the middle of first bank.

When OPTEE memory is removed from first bank, it may split the first bank
to two banks, adjust the MMU table for the split case,
Since the default CONFIG_NR_DRAM_BANKS is 4, it is enough, just enlarge
i.MX8MP evk to default to avoid issue.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com>
Tested-by: Silvano di Ninno <silvano.dininno@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:48 +08:00
Jian Li
3f63d27c17 imx8mp: Disables use of MR4 TUF flag (MR4[7]) bit
In uMCTL2 Databook, for LPDDR4, it is recommended to set
this register to 1. This can avoid ddr bandwidth is lower
after booting with running for a while.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Jian Li <jian.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Jian Li
5865d14dde imx8mp: DDR performance tunning
1. set SCHED.rdwr_idle_gap=0
2. set SCHED.pageclose=1

Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Jian Li <jian.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Jian Li
dd2f41370d imx8mp: enable rd_port_urgent
Need to enable read urgent for NoC panic signal

Signed-off-by: Jian Li <jian.li@nxp.com
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
Jagan Teki
f247354708 arm: Remove mx31pdk board
DM, OF_CONTROL, DM_SPI and other driver model migration
deadlines are expired for this board.

Remove it.

Acked-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-07-09 20:58:06 +05:30
Tom Rini
0567099bea arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB
There are a few remaining places where we say CONFIG_SECURE_BOOT rather
than CONFIG_IMX HAB.  Update these instances.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Fixes: d714a75fd4 ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-06-26 10:29:06 -04:00
Jagan Teki
47df4b5f2a powerpc: Remove TWR-P1025_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Xiaobo Xie <xiaobo.xie@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
5d226cd013 powerpc: Remove T4160QDS_NAND_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
ce17d99d12 powerpc: Remove T1040QDS_DDR4_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
7723a6deb7 powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
197fc64578 powerpc: Remove P1022DS_36BIT_NAND_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Timur Tabi <timur@tabi.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
8429b95167 powerpc: Remove configs/MPC8536DS_36BIT_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
447ec175b2 powerpc: Remove configs/C29XPCIE_NAND_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Po Liu <po.liu@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
55bcea4fb4 powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Naveen Burmi <naveen.burmi@nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
f178468b5e powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Jagan Teki
e3e6782d47 powerpc: Remove configs/B4420QDS_NAND_defconfig board
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Ashish Kumar <ashish.kumar@nxp.com>
Patch-cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-18 21:47:08 +05:30
Michal Simek
a633a804a2 trivial: Fix booot occurences
s/booot/boot/g

The first ase is booot instead of boot and second u-booot instead of
u-boot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-15 11:23:41 -04:00
Tom Rini
be79009f3b Fixes for 2020.07
-----------------
 
 - mx53: mx53menlo Convert to DM_ETH, fix fail boot
 - imx8mp_evk: fix boot issue
 - MX6, display5: fix environment
 - drop warnings (watchdog) for i.MX8mm i.mx8mp
 - enable bootaux for i.MX8M
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXt+Grw8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aLCQCeK7NCaFMWpTtGSwYVDnl5PVCodqkAn2XuBkdu
 NCxgw1UqknHk3GaY0s9u
 =mUxD
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200609' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.07
-----------------

- mx53: mx53menlo Convert to DM_ETH, fix fail boot
- imx8mp_evk: fix boot issue
- MX6, display5: fix environment
- drop warnings (watchdog) for i.MX8mm i.mx8mp
- enable bootaux for i.MX8M

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-09 09:17:24 -04:00
Tom Rini
08649c3d50 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug
  fixes
- Add TBI PHY access through MII
- DDR: Rework errata workaround for A008109, A008378, 009942
2020-06-08 08:51:59 -04:00
Peng Fan
0ec9d5bda9 imx8mp_evk: spl: no need the code since spl framework could do that
We no need invoke the code, since spl framework could help
us do that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08 10:42:39 +02:00
Peng Fan
bdada3b14d imx8mp_evk: spl: use spl_early_init
Use spl_early_init to replace spl_init, spl_init will be invoked
in board_init_r, we only need use spl_early_init to setup malloc
and scan early dt.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08 10:42:35 +02:00
Peng Fan
ebdd07f5b2 imx8mp_evk: spl: drop timer_init
timer_init has been invoked in arch_cpu_init, no need to invoke
it again in board code.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08 10:42:30 +02:00
Peng Fan
87f6e2f51e imx8mp_evk: spl: drop useless code
Drop useless getting ccm device, there is no need to explicted do this
in board code, and we not enable SPL CLK currently.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08 10:42:26 +02:00
Fabio Estevam
9ccd30df60 imx8mp_evk: Add a README file
Add a README file explaining the U-Boot build and SD card flash procedures.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-06-08 10:41:44 +02:00
Madalin Bucur
564637a360 board/freescale: add the DM_ETH changes for the PPC DPAA platforms
Add the required changes for compiling with DM_ETH on the PPC
DPAA platforms.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-03 12:14:28 +05:30
Tom Rini
0d172d2a0f powerpc: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

Cc: Po Liu <po.liu@nxp.com>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02 17:27:04 -04:00
Tom Rini
b0b13f4114 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds
- QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based
  platforms
- Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20 08:46:56 -04:00
Ioana Ciornei
020ed9c666 arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support
Add support for selecting the appropriate DTS file depending on the
SERDES protocol used.

The fsl-ls2080a-qds DTS will be used by default if there isn't a DTS
file specifically made for the current SERDES protocol.

This patch adds the necessary DPMAC nodes (DPMAC 1-8) for
protocol 42 (0x2A) on SD#1.

Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled
implement the board_fit_config_name_match() function in order to choose
the appropriate DTS.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
8cbef912ee board: ls2080aqds: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
is activated.  Also, force the PCI devices to be enumerated at probe
time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
791ec1b9e0 board: ls1088aqds: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
is activated.  Also, force the PCI devices to be enumerated at probe
time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
b62526282a arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
Add support for selecting the appropriate DTS file depending on the
SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if
there isn't a DTS file specifically made for the current SERDES
protocol.

This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found
on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1.

On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs
(Realtek RTL8211FD-CG), as well as 2 input/output connectors for
mezzanine cards. Configuration signals from the Qixis FPGA control the
routing of the external MDIOs.

Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one
of the 2 IO slots. As a consequence, a new node is added to
describe register 0x54 as a MDIO mux controlled with child nodes
describing all the IO slots as MDIO buses.

Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled
implement the board_fit_config_name_match() function in order to choose
the appropriate DTS.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
f49613f4aa board: lx2160aqds: implement board_fit_config_name_match
In case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the
board_fit_config_name_match() function in order to choose the
appropriate DTS for the current SERDES protocol configuration.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:07 +05:30
Ioana Ciornei
4057bddaa2 board: lx2160aqds: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
is activated.  Also, force the PCI devices to be enumerated at probe
time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:07 +05:30
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
3c7dded8e1 Fix some checkpatch warnings in calls to debug()
Fix up some incorrect code style in calls to functions in the log.h
header, mostly debug().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:57 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Simon Glass
b79fdc7697 common: Drop flash.h from common header
Move this uncommon header out of the common header.

Fix up some style problems in flash.h while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Ilias Apalodimas
8a76363712 configs: lx2160a: Add default config for lx2160a using StMM in OP-TEE
Previous patches allow UEFI secure variables to be stored in an RPMB
device using OPTEE. Add a config for the lx2160a hardware so the feature
gets at least compiled.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove superfluous differences to lx2160ardb_tfa_defconfig.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Peng Fan
a6c36f15eb imx: imx8qxp: update fdt_file according to m4 state
Update fdt_file according to m4 parts state

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
e825d3089a imx: imx8qm: update fdt_file according to m4 state
Update fdt_file according to m4 parts state

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
ed5b253d0e imx: imx8qm/qxp: check whether m4 partition booted
Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
231401de2e imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot
Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Tom Rini
191ee8aac6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- Add DM model for P1010RDB
- Add I2C DM Model support for P1010RDB, T1042RDB, T2080, T4240RDB,
  MPC8548CDS, T1024RDB, P4080, P3041DS, P2041RDB, P2020RDB, P1020RDB,
  P5040DS
- Fix reference to READM.qe_firmware
2020-05-05 09:08:53 -04:00
Hou Zhiqiang
177edd82b2 powerpc: P1010RDB: Compile legacy PCIe routines conditionally
Compile the legacy PCIe initialization reoutines for P1010RDB
boards only when DM_PCI is not enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:37 +05:30
Biwen Li
d2e3f7c608 dm: powerpc: T1040/T1042: add i2c DM support
This supports i2c DM for SoC T1040/T1042

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
8e4be6dfb7 dm: powerpc: T2080/T2081: add i2c DM support
This supports i2c DM for SoC T2080/T2081

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
e6bd72f880 dm: ppc: T4240: add i2c DM support
This supports i2c DM for SoC T4240

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
01d97d5f18 dm: ppc: MPC8548CDS: add i2c DM support
This supports i2c DM for board MPC8548CDS

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
2703e640d2 dm: ppc: p1010: add i2c DM support
This supports i2c DM for SoC P1010

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
9e9771a610 dm: powerpc: T1023/T1024: add i2c DM support
This supports i2c DM for SoC T1023/T1024

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
74014dfcd8 dm: powerpc: P1020: add i2c DM support
This supports i2c DM for SoC P1020

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Giulio Benetti
2bdfde5a00 imxrt1020-evk: README: change dd command destination
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive
damage.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01 19:03:10 +02:00
Giulio Benetti
e1747cefbd imxrt1050-evk: README: change dd command destination
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive
damage.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01 19:03:02 +02:00
Fabio Estevam
63fc9d79e5 mx8mq_evk: Remove unrelated comment
The comment does not relate to the setup_i2c() function, so just
remove it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:22 +02:00
Fabio Estevam
d3855c802e imx8mp_evk: Remove unrelated comment
The comment does not relate to the setup_i2c() function, so just
remove it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:22 +02:00
Claudius Heine
b9bb1d06e2 imx: imx8m*: Remove do_reset from board files
Use the `do_reset` implementation of `arch/arm/lib/reset.c` in SPL
instead.  It is very close to what is done here, anyway, and plays
more nicely with the rest of U-Boot than adding a custom `do_reset`
implementation into board files.

`do_reset` from `arch/arm/lib/reset.c` calls `reset_cpu` with 0 as the
addr parameter while the boards are passing WDOG1_BASE_ADDR.  This is
ok because the `reset_cpu` implementation uses WDOG1_BASE_ADDR by
default if 0 is passed in.

Co-Authored-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-01 13:46:22 +02:00
Franck LENORMAND
242d1cd69b imx8: Configure SNVS
Add a module to configure the tamper and secure violation of
the SNVS using the SCU API.

The module also adds some commands:
 - snvs_cfg: Configure the SNVS HP and LP registers
 - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP)
 - tamper_pin_cfg: Change the configuration of the tamper pins
 - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear
   status bits

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Madalin Bucur
6eb32a03e0 driver: net: fm: add DM ETH support
Probe the FMan MACs based on the device tree while
retaining the legacy code/functionality.
One notable change introduced here is that, for DM_ETH,
the name of the interfaces is corrected to the fmX-macY
format, that avoids the referral to the MAC block names
which were incorrect for FMan v3 devices (i.e. DTSEC,
TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1).
The legacy code is left unchanged in this respect.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Yuantian Tang
57100bb09c configs: ls1028aqds: add lpuart config
Add lpuart config to enable lpuart feature.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>.
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Yuantian Tang
7dfa44f72e board: freescale: ls1028a: mux changes for lpuart
mux changes in board file to enable lpuart1 and macro
define for lpuart1 used for mux changes in board configuation
register 13

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Ioana Ciornei
8da1058b98 board: ls2088ardb: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for
DPAA2 Ethernet devices. Compile out any unnecessary setup when
CONFIG_DM_ETH is activated.
Also, force the PCI devices to be enumerated at probe time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Ioana Ciornei
8b6558bd41 board: ls1088ardb: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for
DPAA2 Ethernet devices. Compile out any unnecessary setup when
CONFIG_DM_ETH is activated.
Also, force the PCI devices to be enumerated at probe time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Hou Zhiqiang
f40b120e93 fsl-layerscape: Move GIC RD tables init to soc.c
Move GIC redistributor tables initialization to CPU setup function.

This patch introduces a GIC redistributor tables init function, and
moves the function of reserving memory for GIC redistributor tables
to soc.c and adds a argument for the memory size to reserve, BTW
rename the function so that it is more readable.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
90ae271393 board: lx2160a: Align RD tables address to 64KB
As the lower 16bit of the redistributor pending table is reserved
for describing the memory attributes, we must give a 64KB aligned
address to the GIC LPI initialization function.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Hou Zhiqiang
df32ce2dbe board: lx2160a: Add check in GIC RD tables init
Program the GIC redistributor tables only when succeeded to reserve memory
for them, otherwise kernel will lose the chance to program them using
allocated memory.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Yuantian Tang
35ad8f7af4 armv8: ls1046ardb: update the DIMM WRLVL_START value
The WRLVL_START values are optimized for old DDR MTA18ASF1G72AZ.
Update DDR struct to set new WRLVL_START values so that the new DIMM
MTA18ADF2G72AZ get optimized and the old DIMM still works.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28 17:46:46 +05:30
Tom Rini
bdcb29960e Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Backplane support and bug fixes
2020-04-21 15:20:42 -04:00
Tom Rini
d1bbf833aa Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2020-04-20 08:45:27 -04:00
Florinel Iordache
e174fb7061 t208xqds: add support for backplane kr
Add support for backplane kr on t208xqds: remove board specific fixups
on t208xqds for ethernet interfaces specified in device tree as
supported backplane modes.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20 13:35:11 +05:30
Florinel Iordache
d4694ad86a lx2160aqds: add support for backplane kr
Add support for backplane kr on lx2160aqds: remove board specific fixups
on lx2160aqds for ethernet interfaces specified in device tree as
supported backplane modes.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20 13:35:11 +05:30
Florinel Iordache
d698112fd6 ls1046aqds: add support for backplane kr
Add support for backplane kr on ls1046aqds: remove board specific fixups
on ls1046aqds for ethernet interfaces specified in device tree as
supported backplane modes.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20 13:35:11 +05:30
Yinbo Zhu
316fc6ff76 armv8: ls1028a: define esdhc_status_fixup
This patch is to define esdhc_status_fixup function for ls1028a to disable
SDHC1/SDHC2 status in device tree node if not selected.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20 13:35:11 +05:30
Heinrich Schuchardt
3460a6bba1 board: fsl: lx2160a: unused variable gic_lpi_base
If the board is configured without CONFIG_GIC_V3_ITS, an error occurs:

board/freescale/lx2160a/lx2160a.c: In function ‘ft_board_setup’:
board/freescale/lx2160a/lx2160a.c:673:6: error: unused variable
‘gic_lpi_base’ [-Werror=unused-variable]
  673 |  u64 gic_lpi_base;
      |      ^~~~~~~~~~~~

Let's define the variable as __maybe_unused.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-20 13:35:11 +05:30
Giulio Benetti
931edc6efb Add support for i.MXRT1020-EVK board
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 14:55:00 +02:00
Igor Opaniuk
47d430baed imx8mm_evk: adjust dram size in case bl32 is used
Adjust DRAM size in case BL32 secure payload is loaded (OP-TEE/Trusty),
so during MMU initialization U-Boot won't touch this mem area.

BL32 is loaded to the end of DRAM, bl32 payload size is read from
rom_pointer[1]. This relates to the issue described in
59efa6b52b("imx8m: Fix MMU table issue for OPTEE memory").

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-04-17 18:59:07 +02:00
Fabio Estevam
168fff26a8 imx8qxp_mek: Start with USDHC2 unpowered
After triggering a "reboot" command in Linux the following
hang in SPL is observed:

U-Boot SPL 2020.04 (Apr 15 2020 - 10:49:29 -0300)
Normal Boot
WDT:   Not found!
Trying to boot from MMC2_2
spl: mmc init failed with error: -70
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

This error happens because the CMD_ERR bit is set in the IRQ status
register after booting from Linux.

To ensure a fresh start, force the VMMC supply to get unpowered first.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17 18:58:48 +02:00
Fabio Estevam
03279b7d1f mx6ullevk: Enable Ethernet support
Add Ethernet support using DM_ETH.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17 18:55:55 +02:00
Fabio Estevam
b0b525a942 mx6ul_evk: Remove FEC related board code
mx6ul_evk uses DM_ETH, so there is no need to have board code
to setup the FEC IOMUX and to register the network ports via the
old board_eth_init() method.

Remove these FEC related pieces of code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-04-17 18:55:44 +02:00
Patrick Delaunay
add83917cf doc: update reference to README.board
Update reference in files detected by
scripts/documentation-file-ref-check

doc/README.<board>  => board/<board>/README

Files moved in board directory in
commit 702e6014f1 ("doc: cleanup - move board
READMEs into respective board directories")'

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
a0cd1e1965 doc: update reference to README.imx8image
Update reference in many files detected by
scripts/documentation-file-ref-check

README.imx8image  => imx/mkimage/imx8image.txt

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
b09e28fc54 doc: update reference to README.imximage
Update reference in many files detected by
scripts/documentation-file-ref-check

README.imximage => imx/mkimage/imximage.txt

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Tom Rini
1f47e2aca4 Xilinx changes for v2020.07
common:
 - Align ENV_FAT_INTERFACE
 - Fix MAC address source print log
 - Improve based autodetection code
 
 xilinx:
 - Enable netconsole
 
 Microblaze:
 - Setup default ENV_OFFSET/ENV_SECT_SIZE
 
 Zynq:
 - Multiple DT updates/fixes
 - Use DEVICE_TREE environment variable for DTB selection
 - Switch to single zynq configuration
 - Enable NOR flash via DM
 - Minor SPL print removal
 - Enable i2c mux driver
 
 ZynqMP:
 - Print multiboot register
 - Enable cache commands in mini mtest
 - Multiple DT updates/fixes
 - Fix firmware probing when driver is not enabled
 - Specify 3rd backup RAM boot mode in SPL
 - Add SPL support for zcu102 v1.1 and zcu111 revA
 - Redesign debug uart enabling and psu_init delay
 - Enable full u-boot run from EL3
 - Enable u-boot.itb generation without ATF with U-Boot in EL3
 
 Versal:
 - Enable distro default
 - Enable others SPI flashes
 - Enable systems without DDR
 
 Drivers:
 - Gem:
   - Flush memory after freeing
   - Handle mdio bus separately
 - Watchdog:
   - Get rid of unused global data pointer
   - Enable window watchdog timer
 - Serial:
   - Change reinitialization logic in zynq serial driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
 IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
 =Lg54
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
Priyanka Singh
366b1473e8 configs: ls1012ardb: secure boot: Add PFE config
Add config to enable the PFE and ETH support.
Also change the pfe secure boot header address.

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Biwen Li
bb1165f900 dm: arm64: ls1046a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Biwen Li
fefac937fb dm: arm64: ls1043a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1043A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Yangbo Lu
515f32973a board: fsl: lx2160a: fix SDHC1_DAT4 signal routing
The SDHC1_DAT4 signal could be routes to SDHC1_VS or SDHC1
adapter slot for SDHC1 usage. When SDHC1 is selected in RCW,
do not force to route it to SDHC1 adapter slot if find it
has already been configued for SDHC1_VS.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Meenakshi Aggarwal
224899d273 lx2160a : Remove default VID setting
Set VID to 800 mV for Rev1 and set VID as per switch settings
for Rev2.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:06:52 +05:30
Wasim Khan
8cf113f473 board: fsl: lx2160a: Add GIC LPI memory reserve fixup
Reserve DDR memory region used for GIC LPI configuration table.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:06:51 +05:30
Wasim Khan
a4625d494b board: fsl: lx2160a: Program GIC LPI configuration table
Program GIC LPI configuration table:

1. Redistributor PROCBASER configuration table (which
is common for all redistributors)

2. Redistributor pending table (PENDBASER), for all the
available redistributors.

Signed-off-by: Manish Tomar <manish.tomar@nxp.com>
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:06:51 +05:30
Vikas Singh
297d48857a board: lx2160a: Correct board fixup for PCIe nodes
Update "board_fix_fdt" with correct counter value "i".
This will fix the issue while fetching the "reg_names"
resource from fdt after fixup.

Signed-off-by: Vikas Singh <vikas.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:06:51 +05:30
Tom Rini
23830e98f5 mx31pdk: Move CONFIG_SPL_LDSCRIPT to defconfig
As there is only one mx31pdk config file and with upcoming updates to
the Kconfig parsing logic, rather than have an entry in
board/freescale/mx31pdk/Kconfig, move this single setting to the
defconfig file.

Cc: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by:  Magnus Lilja <lilja.magnus@gmail.com>
2020-03-16 18:54:18 -04:00
Pedro Jardim
9f656fbee3 mx6slevk: Convert to DM_ETH
This fixes the following warning:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10 10:59:08 +01:00
Pedro Jardim
905dbe23b9 mx6sabreauto: Convert to DM_ETH
This fixes the following warning:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10 10:59:08 +01:00
Alifer Moraes
a604b67b87 arm: dts: imx8mq-evk: add phy-reset-gpios for fec1
Instead of resetting the ethernet phy through functions in imx8mq_evk.c, let the
driver reset the phy via dts description adding a reset duration of 10 ms
following atheros 8031's datasheet recommendation.

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-03-10 10:59:08 +01:00
Alifer Moraes
02ee7a4aa5 mx6sabresd: Convert ethernet to driver model
Convert imx6sabresd ethernet to driver model to fix the following warning:

===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-10 10:59:08 +01:00
Fabio Estevam
322bc3e412 imx8qxp_mek: Add myself as maintainer
I would like to help co-maintaining this board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09 15:04:29 +01:00