mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
doc: board: Convert i.MX6 Sabresd README to reST
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Peng Fan
Stefano Babic
parent
a133a7fa8f
commit
4fa2635876
3 changed files with 133 additions and 114 deletions
|
|
@ -1,114 +0,0 @@
|
|||
How to use and build U-Boot on mx6sabresd
|
||||
-----------------------------------------
|
||||
|
||||
The following methods can be used for booting mx6sabresd boards:
|
||||
|
||||
1. Booting from SD card
|
||||
|
||||
2. Booting from eMMC
|
||||
|
||||
3. Booting via Falcon mode (SPL launches the kernel directly)
|
||||
|
||||
|
||||
1. Booting from SD card via SPL
|
||||
-------------------------------
|
||||
|
||||
mx6sabresd_defconfig target supports mx6q/mx6dl/mx6qp sabresd variants.
|
||||
|
||||
In order to build it:
|
||||
|
||||
$ make mx6sabresd_defconfig
|
||||
|
||||
$ make
|
||||
|
||||
This will generate the SPL and u-boot-dtb.img binaries.
|
||||
|
||||
- Flash the SPL binary into the SD card:
|
||||
|
||||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
|
||||
|
||||
- Flash the u-boot-dtb.img binary into the SD card:
|
||||
|
||||
$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
|
||||
|
||||
|
||||
2. Booting from eMMC
|
||||
--------------------
|
||||
|
||||
$ make mx6sabresd_defconfig
|
||||
|
||||
$ make
|
||||
|
||||
This will generate the SPL and u-boot-dtb.img binaries.
|
||||
|
||||
- Boot first from SD card as shown in the previous section
|
||||
|
||||
In U-boot change the eMMC partition config:
|
||||
|
||||
=> mmc partconf 2 1 0 0
|
||||
|
||||
Mount the eMMC in the host PC:
|
||||
|
||||
=> ums 0 mmc 2
|
||||
|
||||
- Flash SPL and u-boot-dtb.img binaries into the eMMC:
|
||||
|
||||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
|
||||
$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
|
||||
|
||||
Set SW6 to eMMC 8-bit boot: 11010110
|
||||
|
||||
|
||||
3. Booting via Falcon mode
|
||||
--------------------------
|
||||
|
||||
$ make mx6sabresd_defconfig
|
||||
$ make
|
||||
|
||||
This will generate the SPL image called SPL and the u-boot-dtb.img.
|
||||
|
||||
- Flash the SPL image into the SD card:
|
||||
|
||||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none conv=notrunc && sync
|
||||
|
||||
- Flash the u-boot-dtb.img image into the SD card:
|
||||
|
||||
$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none conv=notrunc && sync
|
||||
|
||||
Create a partition for root file system and extract it there:
|
||||
|
||||
$ sudo tar xvf rootfs.tar.gz -C /media/root
|
||||
|
||||
The SD card must have enough space for raw "args" and "kernel".
|
||||
To configure Falcon mode for the first time, on U-Boot do the following commands:
|
||||
|
||||
- Setup the IP server:
|
||||
|
||||
# setenv serverip <server_ip_address>
|
||||
|
||||
- Download dtb file:
|
||||
|
||||
# dhcp ${fdt_addr} imx6q-sabresd.dtb
|
||||
|
||||
- Download kernel image:
|
||||
|
||||
# dhcp ${loadaddr} uImage
|
||||
|
||||
- Write kernel at 2MB offset:
|
||||
|
||||
# mmc write ${loadaddr} 0x1000 0x4000
|
||||
|
||||
- Setup kernel bootargs:
|
||||
|
||||
# setenv bootargs "console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait quiet rw"
|
||||
|
||||
- Prepare args:
|
||||
|
||||
# spl export fdt ${loadaddr} - ${fdt_addr}
|
||||
|
||||
- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)
|
||||
|
||||
# mmc write 18000000 0x800 0x800
|
||||
|
||||
- Press KEY_VOL_UP key, power up the board and then SPL binary will
|
||||
launch the kernel directly.
|
||||
|
|
@ -15,3 +15,4 @@ Freescale
|
|||
imxrt1020-evk
|
||||
imxrt1050-evk
|
||||
mx6sabreauto
|
||||
mx6sabresd
|
||||
|
|
|
|||
132
doc/board/freescale/mx6sabresd.rst
Normal file
132
doc/board/freescale/mx6sabresd.rst
Normal file
|
|
@ -0,0 +1,132 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
mx6sabresd
|
||||
==========
|
||||
|
||||
How to use and build U-Boot on mx6sabresd
|
||||
-----------------------------------------
|
||||
|
||||
The following methods can be used for booting mx6sabresd boards:
|
||||
|
||||
1. Booting from SD card
|
||||
|
||||
2. Booting from eMMC
|
||||
|
||||
3. Booting via Falcon mode (SPL launches the kernel directly)
|
||||
|
||||
|
||||
1. Booting from SD card via SPL
|
||||
-------------------------------
|
||||
|
||||
mx6sabresd_defconfig target supports mx6q/mx6dl/mx6qp sabresd variants.
|
||||
|
||||
In order to build it:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ make mx6sabresd_defconfig
|
||||
$ make
|
||||
|
||||
This will generate the SPL and u-boot-dtb.img binaries.
|
||||
|
||||
- Flash the SPL binary into the SD card:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
|
||||
|
||||
- Flash the u-boot-dtb.img binary into the SD card:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
|
||||
|
||||
2. Booting from eMMC
|
||||
--------------------
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ make mx6sabresd_defconfig
|
||||
$ make
|
||||
|
||||
This will generate the SPL and u-boot-dtb.img binaries.
|
||||
|
||||
- Boot first from SD card as shown in the previous section
|
||||
|
||||
In U-boot change the eMMC partition config::
|
||||
|
||||
=> mmc partconf 2 1 0 0
|
||||
|
||||
Mount the eMMC in the host PC::
|
||||
|
||||
=> ums 0 mmc 2
|
||||
|
||||
- Flash SPL and u-boot-dtb.img binaries into the eMMC:
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync
|
||||
$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync
|
||||
|
||||
Set SW6 to eMMC 8-bit boot: 11010110
|
||||
|
||||
3. Booting via Falcon mode
|
||||
--------------------------
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ make mx6sabresd_defconfig
|
||||
$ make
|
||||
|
||||
This will generate the SPL image called SPL and the u-boot-dtb.img.
|
||||
|
||||
- Flash the SPL image into the SD card
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none conv=notrunc && sync
|
||||
|
||||
- Flash the u-boot-dtb.img image into the SD card
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none conv=notrunc && sync
|
||||
|
||||
Create a partition for root file system and extract it there
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
$ sudo tar xvf rootfs.tar.gz -C /media/root
|
||||
|
||||
The SD card must have enough space for raw "args" and "kernel".
|
||||
To configure Falcon mode for the first time, on U-Boot do the following commands:
|
||||
|
||||
- Setup the IP server::
|
||||
|
||||
# setenv serverip <server_ip_address>
|
||||
|
||||
- Download dtb file::
|
||||
|
||||
# dhcp ${fdt_addr} imx6q-sabresd.dtb
|
||||
|
||||
- Download kernel image::
|
||||
|
||||
# dhcp ${loadaddr} uImage
|
||||
|
||||
- Write kernel at 2MB offset::
|
||||
|
||||
# mmc write ${loadaddr} 0x1000 0x4000
|
||||
|
||||
- Setup kernel bootargs::
|
||||
|
||||
# setenv bootargs "console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait quiet rw"
|
||||
|
||||
- Prepare args::
|
||||
|
||||
# spl export fdt ${loadaddr} - ${fdt_addr}
|
||||
|
||||
- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors)::
|
||||
|
||||
# mmc write 18000000 0x800 0x800
|
||||
|
||||
- Press KEY_VOL_UP key, power up the board and then SPL binary will launch the kernel directly.
|
||||
Loading…
Reference in a new issue