Commit graph

109 commits

Author SHA1 Message Date
Andy Yan
bae2f282a9 rockchip: clk: Add rv1108 clock driver
Add clock driver support for Rockchip rv1108 soc

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:25 -06:00
Andreas Färber
37a0c60085 rockchip: rk3368: Add core start-up code for RK3368
The RK3368 is an octa-core Cortex-A53 SoC from Rockchip.
This adds basic support to chain-load U-Boot from Rockchip's
miniloader.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:19 -06:00
Tom Rini
b07d044d5b Merge git://git.denx.de/u-boot-sunxi 2017-06-03 18:04:54 -04:00
Andre Przywara
f98852bfa9 sunxi: A64/Pine64: update device tree from Linux
The Linux device tree for the Allwinner A64 SoC has changed a lot since
the U-Boot version was merged.
Let's replace the current DT with a exact copy of the Linux one as of:
commit c6778ff813d2ca3e3c8733c87dc8b6831a64578b
Merge: 0ff4c01 3c0e3abd
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Tue May 9 10:07:33 2017 -0700

This is the DT used in Linux 4.12-rc1.

Since U-Boot has an Ethernet driver (while Linux does not yet), we
provide the required DT nodes for it in an ...-u-boot.dtsi file, to both
mark them as U-Boot specific and to allow easier upgrading once Linux gets
the driver and its own binding later.
Compared to the existing Ethernet DT nodes we just slightly tweak the clock
and reset nodes in there to match the new bindings used by Linux for those.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-01 09:25:30 +00:00
Álvaro Fernández Rojas
07661e7f50 MIPS: add support for Broadcom MIPS BCM6338 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-31 14:49:55 +02:00
Álvaro Fernández Rojas
23a2168398 MIPS: add support for Broadcom MIPS BCM3380 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-31 14:49:55 +02:00
Álvaro Fernández Rojas
bf9012b808 MIPS: add support for Broadcom MIPS BCM6348 SoC family
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-31 14:49:55 +02:00
Tom Rini
a375ff8e14 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-05-18 17:17:45 -04:00
Ley Foon Tan
827e6a7e0d arm: socfpga: Add reset driver support for Arria 10
Add reset driver support for Arria 10.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-18 11:33:17 +02:00
Peng Fan
993274f485 arm: dts: imx7: sync with Linux
Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'").

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefan Agner <stefan.agner@toradex.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-05-18 11:24:33 +02:00
Tom Rini
1f5541c881 Merge git://git.denx.de/u-boot-rockchip
This adds a new firefly-rk3399 board, MIPI support for rk3399 and
rk3288, rk818 pmic support, mkimage improvements for rockchip and a few
other things.
2017-05-10 17:40:11 -04:00
Tom Rini
102d86552a Merge branch 'master' of git://git.denx.de/u-boot-mips 2017-05-10 15:50:21 -04:00
Kever Yang
dde2223372 rockchip: dts: rk3399: sync with kernel dts
The kernel dts has update a lot since the first time we commit rk3399.dtsi,
sync with kernel for further development.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10 13:37:21 -06:00
Kever Yang
fd9884e292 rockchip: dts: evb-rk3399: add gmac support
Enable gmac for evb-rk3399.

Change-Id: I85e35667e08e22e38577e63eb0e65731fc9c69b6
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2017-05-10 13:37:21 -06:00
Álvaro Fernández Rojas
a1b5e5e7c1 mips: bmips: add bcm6328-power-domain driver support for BCM63268
This driver can control up to 32 power domains.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
9a5cb22fda mips: bmips: add bcm6328-power-domain driver support for BCM6328
This driver can control up to 32 power domains.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
02bb1fa09e mips: bmips: add bcm6345-rst driver support for BCM63268
This driver can control up to 32 clocks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
78118211fb mips: bmips: add bcm6345-rst driver support for BCM6328
This driver can control up to 32 clocks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
efe8b9d012 mips: bmips: add bcm6345-rst driver support for BCM6358
This driver can control up to 32 resets.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
969ebdb930 mips: bmips: add bcm6345-clk driver support for BCM63268
This driver can control up to 32 clocks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
5b14e13c24 mips: bmips: add bcm6345-clk driver support for BCM6328
This driver can control up to 32 clocks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Álvaro Fernández Rojas
70789bd2a5 mips: bmips: add bcm6345-clk driver support for BCM6358
This driver can control up to 32 clocks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Adam Ford
cac4d6a680 omap3630: Copy Device tree from Linux 4.9.y stable
Add device tree support to allow for CONFIG_OF_CONTROL in OMAP3630 boards.
DM3730 can use this same device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-09 20:35:36 -04:00
Igal Liberman
b617a0d7b8 phy: marvell: cp110: add 5G XFI mode
This patch adds the option to configure a comphy to 5G XFI mode.

In order to configure the comphy to 5G XFI, update
the comphy node in the device-tree:
	phy2 {
		phy-type = <PHY_TYPE_SFI>;
		phy-speed = <PHY_SPEED_5_15625G>;
	};

Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09 13:38:18 +02:00
Stefan Roese
6ecc0b1cdf phy: marvell: add IGNORE COMPHY type
This type tells u-boot to preserve the COMPHY settings as is
it is usefull in situations where the COMPHY was initialized by
earlier firmware.
Note that IGNORE is different from UNCONNECTED since setting
UNCONNECTED type will disconnect the COMPHY in the COMPHY MUX
which is a desired behaviour

Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09 13:38:18 +02:00
Stefan Roese
e89acc4bf1 phy: marvell: cp110: update utmi phy connection type
UTMI_PHY_TO_USB_HOST was used in USB3 UTMI dts node only, but there will
be USB2 UTMI dts node for some SoCs that have got USB2 controller, so rename
TO_USB_HOST to TO_USB3_HOST to distinguish TO_USB2_HOST in later on patches.

Signed-off-by: zachary <zhangzg@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09 13:38:18 +02:00
Stefan Roese
cb686454c7 phy: marvell: Replace PHY_TYPE_KR with PHY_TYPE_SFI
Use correct naming as done in the latest Marvell U-Boot version as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09 13:38:18 +02:00
maxims@google.com
3b95902d47 aspeed: Add support for Clocks needed by MACs
Add support for clocks needed by MACs to ast2500 clock driver.
The clocks are D2-PLL, which is used by both MACs and PCLK_MAC1 and
PCLK_MAC2 for MAC1 and MAC2 respectively.

The rate of D2-PLL is hardcoded to 250MHz -- the value used in Aspeed
SDK. It is not entirely clear from the datasheet how this clock is used
by MACs, so not clear if the rate would ever need to be different. So,
for now, hardcoding it is probably safer.

The rate of PCLK_MAC{1,2} is chosen based on MAC speed selected through
hardware strapping.

So, the network driver would only need to enable these clocks, no need
to configure the rate.

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08 11:57:35 -04:00
maxims@google.com
c93adc08f3 aspeed: Device Tree configuration for Reset Driver
Add Reset Driver configuration to ast2500 SoC Device Tree and bindings
for various reset signals

Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08 11:57:32 -04:00
Vikas Manocha
bfea69ad27 stm32f7: sdram: correct sdram configuration as per micron sdram
Actually the sdram memory on stm32f746 discovery board is micron part
MT48LC_4M32_B2B5_6A. This patch does the modification required in the
device tree node & driver for the same.

Also we are passing here all the timing parameters in terms of clock
cycles, so no need to convert time(ns or ms) to cycles.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:57:22 -04:00
Vikas Manocha
6c9a10034a stm32f7: sdram: use sdram device tree node to configure sdram controller
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08 11:39:05 -04:00
Icenowy Zheng
e267d94011 sunxi: add DTSI file for V3s
As we have now V3s support in board code, the V3s DTSI file should also
be added.

Add also some CCU include headers to satisfy the DTSI file.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-21 09:23:27 +02:00
Tom Rini
af1b7286d8 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2017-04-14 09:05:46 -04:00
Heiner Kallweit
a3b02a1d49 arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version
As a prerequisite for adding a Meson GX MMC driver update the
Meson GXBB / Odroid-C2 device tree in Uboot with the latest
version from Linux.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
2017-04-14 15:16:06 +09:00
Tom Rini
b7b24a7a3c Merge git://git.denx.de/u-boot-dm
Here with some DM changes as well as the long-standing AT91 DM/DT
conversion patches which I have picked up via dm.
2017-04-13 17:31:06 -04:00
Wenyou Yang
9319a756ff pinctrl: at91: add pinctrl driver
AT91 PIO controller is a combined gpio-controller, pin-mux and
pin-config module. The peripheral's pins are assigned through
per-pin based muxing logic.

Each SoC will have to describe the its limitation and pin
configuration via device tree. This will allow to do not need
to touch the C code when adding new SoC if the IP version is
supported.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-13 14:44:50 -06:00
Peng Fan
2cc416a836 imx: mx6slevk: introduce device tree support
Introduce device tree support.
dts from kernel commit c4f3f22edd Merge tag 'linux-kselftest-4.11-rc1'

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-03-20 19:00:43 +01:00
Tom Rini
02ccab1908 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	configs/bk4r1_defconfig
	configs/colibri_vf_defconfig
	configs/pcm052_defconfig
	include/configs/colibri_vf.h
	include/configs/pcm052.h
2017-03-19 15:13:38 -04:00
Peng Fan
fa2f20d3c0 arm: dts: add i.MX7ULP dtsi file
Add i.MX7ULP dtsi file.
Add clock and pinfun header files.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-03-17 09:27:08 +01:00
Kever Yang
e94ffee335 rockchip: rk3328: add device tree file
Add dts binding header for rk3328, files origin from kernel.

Signed-off-by: William Zhang <william.zhang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-03-16 16:03:46 -06:00
Heiko Stübner
7b2500babd rockchip: rk3188: Add rk3066/rk3188 clock bindings
Bring in required device clock binding files from Linux.
The clock trees for rk3066 and rk3188 are largely similar, which makes
them share the common parts in a shared header. While we focus on rk3188
for now, bring in both headers already for completeness sake.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:45 -06:00
Kever Yang
5ae2fd9724 rockchip: clk: rk3399: update driver for spl
Add ddr clock setting, add rockchip_get_pmucru API,
and enable of-platdata support.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Added rockchip tag and fix pmuclk_init() build warning:
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-03-16 16:03:43 -06:00
Patrice Chotard
51cb23d452 STiH410-B2260: Add device tree
This device tree has been extracted from v4.9 kernel

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-14 20:40:21 -04:00
Tom Rini
43ade93bdb Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2017-02-01 16:34:25 -05:00
Michael Kurz
797c3c13a9 ARM: DTS: stm32: add stm32f746 device tree pin control files
This patch adds pin control definitions for use in device tree files
The definitions are based on the stm32f746 files from current
linux kernel "include/dt-bindings/pinctrl/stm32f746-pinfunc.h".

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
2017-01-28 14:04:41 -05:00
maxims@google.com
14e4b14979 aspeed: Add basic ast2500-specific drivers and configuration
Clock Driver

This driver is ast2500-specific and is not compatible with earlier
versions of this chip. The differences are not that big, but they are
in somewhat random places, so making it compatible with ast2400 is not
worth the effort at the moment.

SDRAM MC driver

The driver is very ast2500-specific and is completely incompatible
with previous versions of the chip.

The memory controller is very poorly documented by Aspeed in the
datasheet, with any mention of the whole range of registers missing. The
initialization procedure has been basically taken from Aspeed SDK, where
it is implemented in assembly. Here it is rewritten in C, with very limited
understanding of what exactly it is doing.
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28 14:04:29 -05:00
Peng Fan
6301e6570b imx: mx6sx: add dts for mx6sxsabreauto board
Add dts for mx6sxsabreauto board.
dts related files imported fro Linux (commit e5517c2a5a4).

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-01-27 10:52:10 +01:00
Jagan Teki
b8ad70f706 arm: dts: Add devicetree for i.MX6UL
Add i.MX6UL dtsi support from Linux.

Here is the last commit:
"ARM: dts: add gpio-ranges property to iMX GPIO controllers"
(sha1: bb728d662bed0fe91b152550e640cb3f6caa972c)

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-12-16 17:16:10 +01:00
Patrick Bruenn
98d62e618b arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC
Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2016-12-16 12:57:12 +01:00
Peng Fan
3445373691 arm: dts: add i.MX6SLL device tree
Add i.MX6SLL device tree.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2016-12-16 11:38:24 +01:00