Commit graph

1275 commits

Author SHA1 Message Date
Marek Behún
6c96332441 MAINTAINERS: Add entry for kwbimage / kwboot tools
Add entry for these tools with Marek, Pali and Stefan as maintainers.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-01 11:07:13 +02:00
Tom Rini
e908d20fcb Prepare v2021.10-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFRyIMACgkQFHw5/5Y0
 tyz1jgv/aTtHWVcGiw+nvvnnlgdrY4h9yVP5AfBLhOR7ogYOw2B9xHmdh+9oCas9
 Rt45AC4nFvUszxCPJqg36kjljTKRVapemHqhCbgGGeb9GYMkNb1zjk79WnuqgeJy
 ydBUCh1NQI5pOvrpDv7kWRx1IyDi/gUgQO3RBdufbunNmn4Zj4jlw5RmMTgDACRC
 cvTr39gVQq1LOzL2W7+XkSfiEejtGERNs32Nt+jzyAm5a2PkngULUnPW6WsHu+qy
 5YJTR50TK55QgPIdoiqY14BUDpqEbHlNKsE7p6hHkDf6XSS7gLHYW2tVVt2Z8ocg
 9cW35Qotov7MeiSClc3SIEPiIefwh2oTVf0uYoP+uvlRAComvcIzphq68NIQe6Av
 es+ZJI1Qx5ERvDQMMW3xOHTlcBGgpqA0Y/QVr62rE8bEzK/1gvTiP+hVVqzUrnHJ
 f3ZAVt16clIfXKAxGsW4Am05iMmT+rtcS5IrUMuEzmkb0KK58YXsOVmsKHLX9aI1
 T74ewXfu
 =y67Q
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc5' into next

Prepare v2021.10-rc5
2021-09-27 09:45:36 -04:00
Patrick Delaunay
6941ff7619 MAINTAINERS: remove SPEAR entry
As the lastest spear directories are removed, delete the associated entry
in the MAINTAINERS file:
- arch/arm/cpu/arm926ejs/spear/
- arch/arm/include/asm/arch-spear/

Fixes: 570c3dcfc1 ("arm: Remove spear600 boards and the rest of SPEAr support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-09-24 12:09:46 -04:00
Eugen Hristev
0d58dafd64 include: dt-bindings: mfd: add atmel flexcom include file
Add dt-bindings include file for Atmel Flexcom hardware block.
This file is copied from Linux kernel.
It is used in devicetrees from Linux.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-09-21 10:08:24 +03:00
Christophe Leroy
12ff1a8d23 MAINTAINERS: POWERPC MPC8XX: Update email address
Our email addresses have changed from @c-s.fr to @csgroup.eu

Update entry in MAINTAINERS

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2021-09-17 09:24:27 -04:00
Tom Rini
6674edaabf Prepare v2021.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFBKRgACgkQFHw5/5Y0
 tyw/PwwAtGB3rBeYW4rjWuMC5WP1UDTnvZIAok5ImWumWDahjDm8Yq2VCzAe9adw
 EYBjuNmaNl9aQvGVqlVJeIcLku5MLuLQu2za8vhc1R8X9VTPPY+LLTcdOokOmB8y
 8JiaE7fJsb1bZeV+diF9tss3B0IkUrwSJtW1d+qfdz/4UiRvwK5BhnZgzIobDldO
 g1Ldz/xiR2GOAXlUMwDrNAi6qNvmeAqRsQxySVrjltAV2ST7LJnOiHuWvJX6g6VS
 l796Hleh/kULfEW6n+1ZaTNqvVRcJ8xYSOG8w8y9u6HuPBA3JrYH1p1Eo5n7PPDv
 US71Iy/ncweTyfTMEBThWLqjHOQ05sVkWX/r4fj2iJRli+Og53lE1fVJ4ajIx7vz
 Tc76wI43i0I5lr2yTErjUG6EzDDoueqd+c8BwxihNLUK/+QG31xoCEMfC80C25ro
 QhYVFgiPWN0ySUD5M5tbGXODvfNNIDKXpY5oSOTVtemZtDEMpO2zBM1s/K3RV7Ud
 Je9Pj0Cu
 =Me42
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
2021-09-16 10:29:40 -04:00
Lokesh Vutla
f91c3aa07e MAINTAINERS: Update ARM TI entry
Move TI maintainership to Tom.
Updated with the following commands:
find ./ -name MAINTAINERS | xargs sed -i s/"Lokesh Vutla <lokeshvutla@ti.com>"/"Tom Rini <trini@konsulko.com>"/g

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Tom Rini <trini@konsulko.com>
2021-09-09 11:28:54 -04:00
Stephan Gerhold
7093df3c75 MAINTAINERS: Add new drivers for ARM U8500
Update MAINTAINERS with various drivers for ARM U8500 that were
added during the U-Boot 2021.10 merge window.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01 19:25:37 -04:00
T Karthik Reddy
42e20f52d9 soc: xilinx: versal: Add soc_xilinx_versal driver
soc_xilinx_versal driver allows identification of family & revision
of versal SoC. This driver is selected by CONFIG_SOC_XILINX_VERSAL.
Probe this driver using platdata U_BOOT_DEVICE structure which is
defined at mach-versal/cpu.c.
Add this config to xilinx_versal_virt_defconfig &
xilinx_versal_mini_ospi_defconfig file to select this driver.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
T Karthik Reddy
a890a53ad2 soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driver
soc_xilinx_zynqmp driver allows identification of family & revision
of zynqmp SoC. This driver is selected by CONFIG_SOC_XILINX_ZYNQMP.
Add this config to xilinx_zynqmp_virt_defconfig file.
Probe this driver using platdata U_BOOT_DEVICE structure which is
specified in mach-zynqmp/cpu.c.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Reviewed-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-26 08:08:11 +02:00
Michal Simek
3f123b7424 reset: zynqmp: Add reset controller for ZynqMP SoC
Add firmware based reset controller for Xilinx ZynqMP SoC to let other
drivers to call reset functions. Driver is only tested on Xilinx ZynqMP but
support for Xilinx Versal can be simply added. That's why reset_id and
nr_reset are assigned in probe folder.
Driver is inpired by driver from Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 09:32:03 +02:00
Michal Simek
1f065e8fea rtc: zynqmp: Add support for ZynqMP RTC
The whole driver logic is taken from Linux kernel but only set/get/reset
functions are implemented. When device is power off RTC is power out of
battery.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-08-06 09:32:02 +02:00
Roland Gaudig
236d39bd10 doc: usage: add description for setexpr command
Add usage for the setexpr command. It has been added to describe
mainly the new setexpr format string operation.

Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-27 14:50:47 -04:00
Roland Gaudig
f4f8d8bb1a cmd: setexpr: add format string handling
Add format string handling operator to the setexpr command.
It allows to use C or Bash like format string expressions to be
evaluated with the result being stored inside the environment variable
name.

  setexpr <name> fmt <format> [value]...

The following example

  setexpr foo fmt "%d, 0x%x" 0x100 ff

will result in $foo being set to "256, 0xff".

Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-27 14:50:47 -04:00
Ashok Reddy Soma
258ce79cfc net: xilinx: axi_mrmac: Add MRMAC driver
Add support for xilinx multirate(MRMAC) ethernet driver.
This driver uses multichannel DMA(MCDMA) for data transfers of MRMAC.
Added support for 4 ports of MRMAC for speeds 10G and 25G.
MCDMA supports upto 16 channels but in this driver we have setup only
one channel which is enough.

Tested 10G and 25G on all 4 ports.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00
AKASHI Takahiro
d75f48a83d MAINTAINERS: correct the path of UEFI docs
Change the path from doc/uefi to doc/develop/uefi.

Fixes: commit d1ceeeff6c ("doc: Move UEFI under develop/")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-24 10:49:51 +02:00
Keerthy
02bfcc5c3a remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs
The K3 AM65x family of SoCs have the next generation of the PRU-ICSS
processor subsystem, commonly referred to as ICSSG. Each ICSSG processor
subsystem on AM65x SR1.0 contains two primary PRU cores and two new
auxiliary PRU cores called RTUs. The AM65x SR2.0 SoCs have a revised
ICSSG IP that is based off the subsequent IP revision used on J721E
SoCs. This IP instance has two new custom auxiliary PRU cores called
Transmit PRUs (Tx_PRUs) in addition to the existing PRUs and RTUs.

Each RTU and Tx_PRU cores have their own dedicated IRAM (smaller than
a PRU), Control and debug feature sets, but is different in terms of
sub-modules integrated around it and does not have the full capabilities
associated with a PRU core. The RTU core is typically used to aid a
PRU core in accelerating data transfers, while the Tx_PRU cores is
normally used to control the TX L2 FIFO if enabled in Ethernet
applications. Both can also be used to run independent applications.
The RTU and Tx_PRU cores though share the same Data RAMs as the PRU
cores, so the memories have to be partitioned carefully between different
applications. The new cores also support a new sub-module called Task
Manager to support two different context thread executions.
The driver currently supports the AM65xx SoC

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210622063431.3151-3-lokeshvutla@ti.com
2021-07-15 17:56:04 +05:30
Keerthy
7bafe88620 soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
The Programmable Real-Time Unit - Industrial Communication
Subsystem (PRU-ICSS) is present of various TI SoCs such as
AM335x or AM437x or the AM654x family. Each SoC can have
one or more PRUSS instances that may or may not be identical.

The PRUSS consists of dual 32-bit RISC cores called the
Programmable Real-Time Units (PRUs), some shared, data and
instruction memories, some internal peripheral modules, and
an interrupt controller. The programmable nature of the PRUs
provide flexibility to implement custom peripheral interfaces,
fast real-time responses, or specialized data handling.

Add support for pruss driver. Currently am654x family
is supported.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210622063431.3151-2-lokeshvutla@ti.com
2021-07-15 17:56:04 +05:30
Ley Foon Tan
d3cffc8316 MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
I'm no longer work in Intel, change Intel SoCFPGA co-maintainer to
Tien Fong Chee.

Signed-off-by: Ley Foon Tan <lftan.linux@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
2021-07-14 16:48:04 -04:00
Tom Rini
1c58857ad7 ppc: Remove sbc8641d board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  This is also the last
of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-07 19:52:24 -04:00
Radu Pirea (NXP OSS)
3ef2050a6a phy: add nxp tja1103 phy driver
Add nxp tja1103 phy driver.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-06 05:22:41 +03:00
Tom Rini
6d0453d889 Prepare v2021.07-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmDaJXgACgkQFHw5/5Y0
 tyySmwwAkW7GVAv+bXSd+8u1IsScl0QrSCoBdfHpdMcAME3gZmXqxClxskfbYJR/
 3IByQFlsn7j8HruR/49+etk0i0Pc4HNfynTLuAy+77/lh+h3Pnru/VPBhQqR7KW0
 NN5STn91QWLl74vRmx5wmEfSMhg7LTE1US8Rh6UXAd2dAiPd+hUawIR9D0Pq5Gzm
 nn7HvamDYspFUgSYYl8h1RtRQ9VqAFpnnPphpLkvX6323uCQwccXu5pnj1fLfGfj
 iO2Q+bDcwpEdUosox/LM1BdMoaSA+opOjk/e72y9V84+Jk6D+Jn5zQEpF5TJnTyI
 Yi2+NuJWS5xFWk1dnJrbGt0HpWM2oO12dZZ7eYy/FdsPJiWAS0ppRuxHVb868vjD
 ulca7acFPUjGyo3vBw1S0iVmPCBFGHBoyg3QLrUHYbpISeBeoa2w2cDxQl90ahw/
 TgRx+yutKfwkBPfILwDylNOgCGRwvLfroRyMEMiQ3gTSOCBmBX/yMv1k8tb9ZvPZ
 /WVsK6dw
 =F7x1
 -----END PGP SIGNATURE-----

Merge tag 'v2021.07-rc5' into next

Prepare v2021.07-rc5

# gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	configs/am64x_evm_r5_defconfig
2021-06-28 16:22:13 -04:00
Tom Rini
fcf3981161 Merge https://source.denx.de/u-boot/custodians/u-boot-x86
- x86: Discard .note.gnu.property sections
- nvme: Skip block device creation for inactive namespaces
- nvme: Convert NVMe doc to reST, and various minor fixes
2021-06-23 08:46:26 -04:00
Jaehoon Chung
af8e2d4746 MAINTAINER, git-mailrc: Update the mmc maintainer
Update to me as co-maintainer with Peng.
Additionally, update the mmc alias in git-mailrc.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2021-06-23 08:45:03 -04:00
Bin Meng
f68d5a66cd MAINTAINERS: Add an entry for NVMe
This was missed when NVMe support was initially brought to U-Boot
back in 2017. Add an entry for it and list myself as the maintainer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-06-23 17:21:14 +08:00
Sean Anderson
493110cc49 clk: k210: Move k210 clock out of its own subdirectory
Now that we have only one clock driver, we don't need to have our own
subdirectory. Move the driver back with the rest of the clock drivers.

The MAINTAINERS for kendryte pinctrl is also fixed since it has always been
wrong.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-17 09:40:58 +08:00
Oleh Kravchenko
1180baec98 Add EV-iMX280-NANO-X-MB board
A simple prototyping board with one microSD port, one Ethernet port,
2 USB ports, I2C, SPI, GPIO, and UART interfaces.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:49 +02:00
Oleh Kravchenko
3675ac081a Add out4.ru O4-iMX-NANO board
Board designed for quick prototyping and has one microSD port,
2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO,
UART interfaces, and 2 RGB LEDs.

Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Cc: Stefano Babic <sbabic@denx.de>
2021-06-09 13:32:42 +02:00
Kever Yang
87f9c08d84 MAINTAINERS: Update maintainer's mail address
Philipp has change the mail and the legacy one is not available, update it
to the new one.

CC: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-01 19:57:02 +08:00
Samuel Holland
f264e796c0 MAINTAINERS: Add allwinner/sunxi driver directories
These drivers are sunxi platform-specific, and so are of interest to the
sunxi maintainers.

In fact, as there is no PHY driver maintainer, drivers/phy/allwinner had
no maintainer at all.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-05-31 00:39:54 +01:00
Ley Foon Tan
af02975eb9 MAINTAINERS, git-mailrc: socfpga: Update email address for Ley Foon
My mail address doesn't work any longer, change to gmail.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-05-17 17:18:40 -04:00
Rick Chen
c0c80e7843 MAINTAINERS: Add a co-maintainer for RISC-V
Add Leo as co-maintainer for RISC-V.

Signed-off-by: Rick Chen <rick@andestech.com>
2021-05-14 16:19:48 +08:00
Bin Meng
200fdd3bff MAINTAINERS: Add an entry for VirtIO
This was missed when VirtIO support was initially brought to U-Boot
back in 2018. Add an entry for it and list myself as the maintainer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-10 13:56:12 +08:00
Joel Peshkin
4e9bce1243 Add support for stack-protector
Add support for stack protector for UBOOT, SPL, and TPL
as well as new pytest for stackprotector

Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com>

Adjust UEFI build flags.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20 07:31:12 -04:00
Heinrich Schuchardt
75d48d11db doc: move README.dfu to HTML documentation
Move README.dfu to doc/usage/dfu.rst and convert to reStructured text.

In the long run this page should be split into two. One for the overview
and one for the dfu command. UEFI capsule updates and dfutftp should be
integrated into the overview page.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-16 09:37:04 +01:00
Matthias Brugger
02675393d0 MAINTAINERS: Update info for Raspberry Pi
Add RPi config files and custodian repository.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-03-02 13:53:38 +01:00
Heinrich Schuchardt
a3bbd0b912 Correct U-Boot upstream repository
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git
effective 2021-02-28.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-28 13:57:30 -05:00
Heinrich Schuchardt
77cae565bd MAINTAINERS: assign tools/mkeficapsule.c to EFI PAYLOAD
tools/mkeficapsule.c is used to prepare test files for testing the UEFI
sub-system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-26 16:17:43 +01:00
Ramon Fried
9644bd0d01 MAINTAINERS: Add maintainer to network subsystem
Add myself as co maintainer to network subsystem
Acked-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2021-02-01 16:33:01 -05:00
Abbie Chang
a70d7b0192 net: phy: ca_phy: Add driver for CAxxxx SoCs
Add phy driver support for MACs embedded inside Cortina Access SoCs

Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>

CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Tom Rini <trini@konsulko.com>
CC: Aaron Tseng <aaron.tseng@cortina-access.com>

Moved out PHY specific code out of Cortina NI Ethernet driver
and into a Cortina Access PHY interface driver
2021-01-27 10:47:47 -05:00
Aaron Tseng
febe13b438 net: cortina_ni: Add eth support for Cortina Access CAxxxx SoCs
Add Cortina Access Ethernet device driver for CAxxxx SoCs.
This driver supports both legacy and DM_ETH network models.

Signed-off-by: Aaron Tseng <aaron.tseng@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
Signed-off-by: Abbie Chang <abbie.chang@cortina-access.com>

CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Abbie Chang <abbie.chang@Cortina-Access.com>
CC: Tom Rini <trini@konsulko.com>
2021-01-27 10:47:44 -05:00
Tom Rini
c99be953e7 - MIPS: add support for Mediatek MT7620 SoCs
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAmAN21EACgkQKPlOlyTy
 XBgzBw/+LUzGufIop4CimnEhqrfKRuoSKinRWhx8Lo4PyjF5SAwLgIyCWY95PoQf
 eDka+Ufyj1TbvqbPR+bhJbdL7wFrku3iKE7b0Ni8AamkmsyybxAVeyByen0Q1mSF
 q4KoPhKJmpdZOfrUVrXZBBwG7/T1WTHMrCc2ZSacR0G/IeimgLplT4sRk/uG1eFo
 uiKYf0/AjD28WNvlE9Dq0EZQA+KsTe/q7GQ79nOTuxYTOjbPA59WXTOtZMo1cPgc
 GhT1EJr4N7OcGvxgkiZ8Gs4mYMbFFVvMAUNW1Bsx4v1aYJyfgP0ua58gTnWSMn69
 OJNdxTs+JYBSIZd0B8gNf0P1ZQgrGACA1Vq4O3xJUImtkzp0tMID97ZwvAdhJQbo
 MhNrWcIxijrzWDHEGhnyZ0wyqWmSwznsrvIlS9hMuIxxmnYKveTwfkCeVcvkwvn7
 Nc1Pls1Lt2ViP8/Nygc+fAMg30vtp+NvSrbA53foka62sJMqmWAjPEprPPlJV0Z2
 qGJWCxIJ/1YAUjkNrEnSo/2A3SSAM8wA1ku6aT/Ju7NZCx/3m7sYXE+wQuxYlU2I
 zxQDO+2H0v0nlVVWebQZGZx8sn6Z4O+aGCLAkpJ9tqrViJYhy0Ti2QZi0Udcl1Ny
 lADQXQM2iPoQ2zJlO4AmzXCZ7DLrKVeS3hFFiVxRWK16apckz+o=
 =fKDK
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2021-01-24' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- MIPS: add support for Mediatek MT7620 SoCs
2021-01-25 14:38:40 -05:00
Heinrich Schuchardt
9c6d050966 doc: document sbi command
Add a man-page for the sbi command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-25 01:15:33 +01:00
Weijie Gao
9f03585e8d MAINTAINERS: add maintainer for MediaTek MIPS platform
Update maintainer for MediaTek MIPS platform

Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:27 +01:00
Kate Liu
34a5addb7b board: presidio: Add Parallel NAND support
Set environment for Nand flash (U-boot 2020.04):
- add nand flash in the device tree
- add new default configuration file for G3 using parallel Nand
- set nand parameters in presidio_asic.h

Signed-off-by: Kate Liu <kate.liu@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-01-18 15:14:37 -05:00
Kate Liu
161df94b3c mtd: rawnand: cortina_nand: Add Cortina CAxxxx SoC support
Add Cortina Access parallel Nand support for CAxxxx SOCs

Signed-off-by: Kate Liu <kate.liu@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Tom Rini <trini@konsulko.com>
CC: Scott Wood <oss@buserror.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-01-18 15:14:34 -05:00
Michal Simek
b66d7af41f video: seps525: Add seps525 SPI driver
Add support for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
using the SEPS525 (Syncoam) LCD Controller. Syncoam Seps525 PM-Oled is RGB
160x128 display. This driver has been tested through zynq-spi driver.

ZynqMP> load mmc 1 100000 rainbow.bmp
61562 bytes read in 20 ms (2.9 MiB/s)
ZynqMP> bmp info 100000
Image size    : 160 x 128
Bits per pixel: 24
Compression   : 0
ZynqMP> bmp display 100000
ZynqMP> setenv stdout vidconsole

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05 11:54:53 +01:00
Vikhyat Goyal
1ac1a04b9e video: seps525: Add dt binding description
Added dt binding for seps525 display driver.

Signed-off-by: Vikhyat Goyal <vikhyat.goyal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-05 11:54:53 +01:00
Tom Rini
46a4d75203 Pull request for UEFI sub-system for efi-2021-01-rc4
* Provide a tool to create a file with UEFI variables to preseed UEFI
   variable store.
 * Make size of UEFI variable store configurable.
 * Add man pages for commands 'bootefi' and 'button'.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl/ffokACgkQxIHbvCwF
 GsRn6Q/+P/7dmaqvatjar+2WxZN3WU1irQnp+p7fo2+QmijkjLvvRcnpjxAk2DTT
 a6xAh/RCRcKQt9nDw1thxJ7v0jUJ5US1sNa2SyrwrDfhQvYxuliflJJlsihV6sg+
 GOBOh0cwePEGRbHg6cm4klLc6jM8m/K4PYR7g+cRnqhSlOp6KE2IEgzUKExN7rp5
 OJJI/jJ3WslF16n37//4+XULAC71PHPhxF0Nj09fMJIsNjuG5F1dLQ3yXGuFse64
 d8/WFQEp3/9JPqfvDJtkJttRyNEDLDnRwzpzfpnJtaQi4fHcHDUO3FVcyscWhZh2
 Hs1ULebd/b8pBYllPv/YSfnteNqaGMviALEW46Bx9ZYc9DQKT9f332JsDoIhsxwA
 +keROkT8IqopFpzVvlCp5Ox+eYiDffy9y+t4RP3eP/V8CFtHhJ3DeWrbiG7X75h4
 2BOH6cdBTeepG79qd7MoxLYOA+931DJ1gl6ZL/AfBOtz4vs2Ne0jlUYkKjSHvthV
 jrhBcyQJcUo2U2RnXxNaSkfN66xOpSw+n6PoVCW0yq/xnJmqz746F+t3xacL9uj6
 HpPziHI1SWLrAWc1JRB/LkWYrN0wGJIcAEoDG21fJ36GBVPqTCObAIOllf9l0+oY
 LUbEev12dj3HUockYfn4AqU4tdiUoQSnf6NJwV72n5gFQxez8GQ=
 =2GYO
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc4

* Provide a tool to create a file with UEFI variables to preseed UEFI
  variable store.
* Make size of UEFI variable store configurable.
* Add man pages for commands 'bootefi' and 'button'.
2020-12-20 14:55:59 -05:00
Heinrich Schuchardt
77504ee676 MAINTAINERS: add tools/efivar.py to EFI PAYLOAD
tools/efivar.py allows to prepare a file with UEFI variables to preseed
the UEFI variable store.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 17:40:06 +01:00
Heinrich Schuchardt
0c1b71cd07 doc: man-page for bootefi command
Provide a description of the bootefi command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-20 17:40:06 +01:00
Pengpeng Chen
24f2794232 spi: ca_sflash: Add CAxxxx SPI Flash Controller
Add SPI Flash controller driver for Cortina Access
CAxxxx SoCs

Signed-off-by: Pengpeng Chen <pengpeng.chen@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Vignesh R <vigneshr@ti.com>
CC: Tom Rini <trini@konsulko.com>
[jagan: rebase on master]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-12-18 16:16:37 +05:30
Patrice Chotard
5905e0880a MAINTAINERS: Update ARM STI and ARM STM STM32MP Arch maintainers emails
Update Patrick and my email address with the one dedicated to
upstream activities.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-09 10:57:50 +01:00
Heinrich Schuchardt
e405efcf4b MAINTAINERS: assign include/log.h
include/log.h belongs to LOGGING.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-02 16:21:58 -05:00
Sean Anderson
72eda5074b lib: Add getopt
Some commands can get very unweildy if they have too many positional
arguments. Adding options makes them easier to read, remember, and
understand.

This implementation of getopt has been taken from barebox, which has had
option support for quite a while. I have made a few modifications to their
version, such as the removal of opterr in favor of a separate getopt_silent
function. In addition, I have moved all global variables into struct
getopt_context.

The getopt from barebox also re-orders the arguments passed to it so that
non-options are placed last. This allows users to specify options anywhere.
For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as
getopt parsed the options. However, this feature conflicts with the const
argv in cmd_tbl->cmd. This was originally added in 54841ab50c ("Make sure
that argv[] argument pointers are not modified."). The reason stated in
that commit is that hush requires argv to stay unmodified. Has this
situation changed? Barebox also uses hush, and does not have this problem.
Perhaps we could use their fix?

I have assigned maintenance of getopt to Simon Glass, as it is currently
only used by the log command. I would also be fine maintaining it.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:56:11 -04:00
Tom Rini
47754334b1 Xilinx changes for v2021.01-v2
common:
 - Add support for 64bit loadables from SPL
 
 xilinx:
 - Update documentation and record ownership
 - Enable eeprom board detection based legacy and fru formats
 - Add support for FRU format
 
 microblaze:
 - Optimize low level ASM code
 - Enable SPI/I2C
 - Enable distro boot
 
 zynq:
 - Add support for Zturn V5
 
 zynqmp:
 - Improve silicon detection code
 - Enable several kconfig options
 - Align DT with the latest state
 - Enabling security commands
 - Enable and support FPGA loading from SPL
 - Optimize xilinx_pm_request() calling
 
 versal:
 - Some DTs/Kconfig/defconfig alignments
 - Add binding header for clock and power
 
 zynq-sdhci:
 - Add support for tap delay programming
 
 zynq-spi/zynq-qspi:
 - Use clock framework for getting clocks
 
 xilinx-spi:
 - Fix some code issues (unused variables)
 
 serial:
 - Check return value from clock functions in pl01x
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX5rH/QAKCRDKSWXLKUoM
 IRPAAJ9SvHR3w1qTc5W+Q5CWBUH5wJbNYQCaA4PpqZCdvyu1+nF5luL6JHhbDgw=
 =hOd7
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.01-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.01-v2

common:
- Add support for 64bit loadables from SPL

xilinx:
- Update documentation and record ownership
- Enable eeprom board detection based legacy and fru formats
- Add support for FRU format

microblaze:
- Optimize low level ASM code
- Enable SPI/I2C
- Enable distro boot

zynq:
- Add support for Zturn V5

zynqmp:
- Improve silicon detection code
- Enable several kconfig options
- Align DT with the latest state
- Enabling security commands
- Enable and support FPGA loading from SPL
- Optimize xilinx_pm_request() calling

versal:
- Some DTs/Kconfig/defconfig alignments
- Add binding header for clock and power

zynq-sdhci:
- Add support for tap delay programming

zynq-spi/zynq-qspi:
- Use clock framework for getting clocks

xilinx-spi:
- Fix some code issues (unused variables)

serial:
- Check return value from clock functions in pl01x
2020-10-29 11:30:15 -04:00
Andre Przywara
5a4a891e04 MAINTAINERS, git-mailrc: Update sunxi maintainers
Maxime mentioned that he feels not having the time to be an Allwinner
maintainer anymore. Take over from him.

Maxime, many thanks for your great work in the past! I hope I can still
relay the occasional technical question to you in the future.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-10-29 09:57:13 -04:00
Heinrich Schuchardt
87e9963d5a rtc: provide an emulated RTC
On a board without hardware clock this software real time clock can be
used. The build time is used to initialize the RTC. So you will have
to adjust the time either manually using the 'date' command  or use
the 'sntp' to update the RTC with the time from a network time server.
See CONFIG_CMD_SNTP and CONFIG_BOOTP_NTPSERVER. The RTC time is
advanced according to CPU ticks.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:15 +01:00
Michal Simek
79d4204f72 MAINTAINERS: Record documentation for Xilinx platforms
Add fragment to cover documenation for Xilinx platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 08:01:36 +01:00
Sean Anderson
47d7e3b5eb riscv: Move timer portions of SiFive CLINT to drivers/timer
Half of this driver is a DM-based timer driver, and half is RISC-V-specific
IPI code. Move the timer portions in with the other timer drivers. The
KConfig is not moved, since it also enables IPIs. It could also be split
into two configs, but no boards use the timer but not the IPI atm, so I
haven't split it.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26 10:01:28 +08:00
Sean Anderson
79b135f1f9 riscv: Move Andes PLMT driver to drivers/timer
This is a regular timer driver, and should live with the other timer
drivers.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-10-26 10:01:28 +08:00
Robert Marko
033ec636fc rng: Add Qualcomm MSM PRNG driver
Add support for the hardware pseudo random number generator found in Qualcomm SoC-s.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22 09:54:54 -04:00
Robert Marko
975151d056 net: Add IPQ40xx MDIO driver
This adds the driver for the IPQ40xx built-in MDIO.
This will be needed to support future PHY driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22 09:54:54 -04:00
Robert Marko
367ea426a5 spi: Add Qualcomm QUP SPI controller driver
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s.

Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW.
FIFO and Block modes are supported, no support for DMA mode is planned.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22 09:54:54 -04:00
Tom Rini
b90daf2743 - Activate CMD_EXPORTENV/CMD_IMPORTENV/CMD_ELF for STM32MP15 defconfig
- Fix stm32prog command: parsing of FlashLayout without partition
 - Update MAINTAINERS for ARM STM STM32MP
 - Manage eth1addr on dh board with KS8851
 - Limit size of cacheable DDR in pre-reloc stage in stm32mp1
 - Use mmc_of_parse() to read host capabilities in mmc:sdmmc2 driver
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl+QXvgACgkQ4rK92eCq
 k3Vbrgf/cBKPY9bS+lJVARgjDvIOdcXzpgH/F7dUlq+dzu/mCwhIBVKxM7/nXh5p
 RhfGET2fpMYY/41LkKza7AqOiGTXZG4pTmCGe1UHXrXeIPjinWG1LQjU/KOk6U4n
 681P9BZfTUXrVgzLBIUY1KBFVyMaiYfVjxU3MnA1vqrubymFbf+IpUt3OIegUDCp
 AjrTdj7sFEQ3nG/pgTyqFCwkl/MG53aB9MiaBBRxeGHYnDn0qzAEHSGqzSZZGhNl
 1ubJDF3K7w6Pj3MzIeA80M5r0fJoTy/qWcNH31psOpyQaHJ9NbPGjFYE6AkDPV4l
 27QN71AcRtCzlv1XQpblA98pa1bUYw==
 =Bl3G
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20201021' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Activate CMD_EXPORTENV/CMD_IMPORTENV/CMD_ELF for STM32MP15 defconfig
- Fix stm32prog command: parsing of FlashLayout without partition
- Update MAINTAINERS for ARM STM STM32MP
- Manage eth1addr on dh board with KS8851
- Limit size of cacheable DDR in pre-reloc stage in stm32mp1
- Use mmc_of_parse() to read host capabilities in mmc:sdmmc2 driver
2020-10-22 08:25:41 -04:00
Patrick Delaunay
2bf692d317 MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform
Add the STM32MP1 RNG driver in the list of drivers supported by
the STMicroelectronics STM32MP15x series.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-21 18:12:20 +02:00
Patrick Delaunay
ce52023050 MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform
Add files and directories regex "stm32" and "stm" in "ARM STM STM32MP"
platform to avoid missing files or drivers supported by the
STMicroelectronics series STM32MP15x.

This patch adds the rules already used in Linux kernel for
ARM/STM32 ARCHITECTURE.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-10-21 18:12:20 +02:00
Chunfeng Yun
0cd791ced9 MAINTAINERS: add USB driver to ARM MEDIATEK
Add MediaTek USB3 Dual-Role controller driver to ARM MEDIATEK,
and add myself as a maintainer for it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20 00:49:05 +02:00
Sean Anderson
7224d5ccf8 pinctrl: Add support for Kendryte K210 FPIOA
The Fully-Programmable Input/Output Array (FPIOA) device controls pin
multiplexing on the K210. The FPIOA can remap any supported function to any
multifunctional IO pin. It can also perform basic GPIO functions, such as
reading the current value of a pin. However, GPIO functionality remains
largely unimplemented (in favor of the dedicated GPIO peripherals).

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Sean Anderson
7f0f1806e3 test: pinmux: Add test for pin muxing
This extends the pinctrl-sandbox driver to support pin muxing, and adds a
test for that behaviour. The test is done in C and not python (like the
existing tests for the pinctrl uclass) because it needs to call
pinctrl_select_state.  Another option could be to add a command that
invokes pinctrl_select_state and then test everything in
test/py/tests/test_pinmux.py.

The pinctrl-sandbox driver now mimics the way that many pinmux devices
work.  There are two groups of pins which are muxed together, as well as
four pins which are muxed individually. I have tried to test all normal
paths. However, very few error cases are explicitly checked for.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-08 11:42:36 -04:00
Heinrich Schuchardt
b0b3524d94 MAINTAINERS: assign doc/arch/sandbox.rst
Add doc/arch/sandbox.rst to the scope of SANDBOX.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-06 09:07:54 -06:00
Tom Rini
caebff09ef First set of u-boot-atmel features for 2021.01 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAl960JkcHGV1Z2VuLmhy
 aXN0ZXZAbWljcm9jaGlwLmNvbQAKCRAesx4CDqwvyDaWCACYjvloDzXQaYaauWwR
 whFwgkUAQ8yjadj/12We/X2b7HGisNFNE80e/V4MU8RrJDFZmohZdLWMfRKez29X
 d+BG+OzVXxHWozny7ZQ2g1yYJbgCI7sVUeemQjUBZJ6aKPneQlVfwyfT2l88wOVK
 yQMqS+ZyVogihR9/NHCOlJHog+6OOoBmc16w1tymM6QcO8ZsYeA66ed8SLnjDb3N
 Rg2Ll2RR/lHuD/Fpxt1aUhybXFKSIOr4Qopo5X0hw5B3ibkp6JXGRE2wIwQYw6CA
 q+sKTg37CSzylipkQ5EOGdLcXD7r3KIGkSbUMb8wvt6dROarnIuQ+zJeF3sr+l2H
 hSoU
 =vHqZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2021.01-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel into next

First set of u-boot-atmel features for 2021.01 cycle:

This feature set includes a new CPU driver for at91 family, new driver
for PIT64B hardware timer, support for new at91 family SoC named sama7g5
which adds: clock support, including conversion of the clock tree to
CCF; SoC support in mach-at91, pinctrl and mmc drivers update.  The
feature set also includes updates for mmc driver and some other minor
fixes and features regarding building without the old Atmel PIT and the
possibility to read a secondary MAC address from a second i2c EEPROM.
2020-10-05 10:54:27 -04:00
Claudiu Beznea
01c35f269f cpu: at91: add driver for CPU
Add basic CPU driver use to retrieve information about CPU itself.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-05 10:45:16 +03:00
Claudiu Beznea
96b9a5cdf8 MAINTAINERS: add Microchip PIT64B timer
Add Microchip PIT64B timer.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-09-28 14:07:26 +03:00
Tom Rini
751b18b8a1 Merge branch 'master' into next
Merge in v2020.10-rc5
2020-09-21 14:25:37 -04:00
Robert Marko
dec042028e phy: add driver for Qualcomm IPQ40xx USB PHY
Add a driver to setup the USB PHY-s on Qualcomm IPQ40xx series SoCs.
The driver sets up HS and SS phys.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Robert Marko
8ef7df5df3 reset: Add IPQ40xx reset controller driver
On Qualcomm IPQ40xx SoC series, GCC clock IP also handles the resets.
So since this will be needed by further drivers, lets add a driver for the reset controller.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18 16:20:47 -04:00
Miquel Raynal
c4d0384a4a MAINTAINERS: add myself as reviewer for SquashFS
I also followed the development of the SquashFS support in U-Boot
as part of Joao Marcos internship, so I would also appreciate receiving
new contributions and bug reports related to this topic.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-09-16 16:54:00 -04:00
Thomas Petazzoni
42ef2edc85 MAINTAINERS: add myself as reviewer for SquashFS
As I have followed the development of the SquashFS support in U-Boot
as part of Joao Marcos work, it makes sense to get Cc'ed on
contributions/bug reports related to the squashfs support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-09-16 16:54:00 -04:00
Baruch Siach
a8a71c9488 MAINTAINERS: update clk entry git tree
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-09-16 16:54:00 -04:00
Robert Marko
a5fc58734f dt-bindings: clock: import Qualcomm IPQ4019 bindings
Import Qualcomm IPQ4019 GCC bindings from Linux.
This will enable using bindings instead of raw clock numbers both in the driver and DTS like Linux does.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-09 16:57:36 -04:00
Rayagonda Kokatanur
975d2a6980 MAINTAINERS: update maintainers file for new files
Update MAINTAINERS file for new files.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:57:35 -04:00
Qu Wenruo
b737c822c0 MAINTAINERS: Add btrfs mailing list and myself as reviewer
Since the current code base is mostly from btrfs-progs, anyone
contributing to U-Boot btrfs code could also help us to improve
btrfs-progs and btrfs kernel module.

Also add myself as designated reviewer.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-09-07 21:00:36 -04:00
Masahiro Yamada
23e333a5c0 MAINTAINERS: step down as maintainer of UniPhier SoCs
I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-08-31 17:11:24 -04:00
Anastasiia Lukianenko
607274f7f6 MAINTAINERS: Add maintainers to XEN section
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-24 14:11:31 -04:00
Chia-Wei, Wang
aff987c457 MAINTAINERS: Add maintainers for Aspeed SoCs
Update maintainers for Aspeed SoC platforms.

Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
2020-08-14 09:46:40 -04:00
Jway Lin
047e31ed4b led: led_cortina: Add CAxxx LED support
Add Cortina Access LED controller support for CAxxxx SOCs

Signed-off-by: Jway Lin <jway.lin@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Simon Glass <sjg@chromium.org>

Add head file fixed link error and remove unused flashing function
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-07 22:31:32 -04:00
Joao Marcos Costa
f428e33b6b test/py: Add tests for the SquashFS commands
Add Python scripts to test 'ls' and 'load' commands. The scripts
generate a SquashFS image and clean the directory after the assertions,
or if an exception is raised.

Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07 22:31:32 -04:00
Joao Marcos Costa
bba604b65e fs/squashfs: add filesystem commands
Add 'ls' and 'load' commands.

Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07 22:31:32 -04:00
Joao Marcos Costa
c510061303 fs/squashfs: new filesystem
Add support for SquashFS filesystem. Right now, it does not support
compression but support for zlib will be added in a follow-up commit.

Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07 22:31:32 -04:00
Rayagonda Kokatanur
1c085cc657 MAINTAINERS: update maintainers for broadcom ns3 platform
Update MAINTAINERS for broadcom ns3 platform (TARGET_NS3).

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29 10:37:11 -04:00
Stefan Bosch
b39cacc268 arm: add (default) config for nanopi2 board
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- Configuration changed, mainly several "CONFIG_..." moved from
  s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related
  configs removed because USB is not supported yet.
- s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2
  specific defines because the appropriate values do not need to be
  configurable.
- pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to
  s5p4418_nanopi2_defconfig.

Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29 08:43:40 -04:00
Robert Marko
e479a7d52e arm: Add support for Qualcomm IPQ40xx family
This introduces initial support for the popular Qualcomm
IPQ40x8 and IPQ40x9 WiSoC series.

IPQ40xx series have 4x Cortex A7 ARM-v7A cores.
Supported are: IPQ4018, IPQ4019, IPQ4028 and IPQ4029.

IPQ40x8 and IPQ40x9 use the same cores, but differ in
addressable RAM size (1GB for IPQ40x9 and 256MB for IPQ40x8)
and supported peripherals (IPQ40x8 lacks RGMII, LCD controller
and EMMC/SDHCI controllers).

IQP4028/IPQ4029 models differ from IPQ4018/IPQ4019 only
by their rated temperatures rates with IPQ402X models being
rated for wider temperature ranges.

Initially this supports:
* Simple clock driver (Only for UART1 now, will be extended)
* Pinctrl driver (Supports UARTX and GPIO now, will be extended)
* GPIOs already supported by msm_gpio driver with updates
* UARTs already supported by serial_msm driver with updates

Further peripherals will come in later patches.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2020-07-29 08:43:40 -04:00
Zhao Qiang
f27d73e941 Watchdog: introduce ARM SBSA watchdog driver
According to Server Base System Architecture (SBSA) specification,
the SBSA Generic Watchdog has two stage timeouts: the first signal
(WS0) is for alerting the system by interrupt, the second one (WS1) is a
real hardware reset.
More details about the hardware specification of this device:
ARM DEN0029B - Server Base System Architecture (SBSA)

This driver can operate ARM SBSA Generic Watchdog as a single stage
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Stefan Roese
ff7e4f030b mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file
This patch adds the base dtsi file for the Octeon 3 cn73xx SoC.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Aaron Williams
0dc4ab9c43 mips: octeon: Initial minimal support for the Marvell Octeon SoC
This patch adds very basic support for the Octeon III SoCs. Only
CFI parallel NOR flash and UART is supported for now.

Please note that the basic Octeon port does not include the DDR3/4
initialization yet. This will be added in some follow-up patches
later. To still use U-Boot on with this port, the L2 cache (4MiB on
Octeon III CN73xx) is used as RAM. This way, U-Boot can boot to the
prompt on such boards.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-07-18 15:47:50 +02:00
Arthur Li
7f5ea25062 i2c: i2c-cortina: added CAxxxx I2C support
Add I2C controller support for Cortina Access CAxxxx SoCs

Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
CC: Heiko Schocher <hs@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>

hs: fixed build error, add include log.h
2020-07-09 06:02:44 +02:00
Tom Rini
621e09cb3b Pull request for UEFI sub-system for efi-2020-10-rc1
This series comprises error corrections for the UEFI subsystem:
 
 * correct consideration of timestamps for variable authentication
 * correct collection of data regions for code authentication
 * correct unit tests to test loading dbx
 * enable FAT_WRITE as required by the UEFI spec
 
 The boot manager uses log functions instead of printf() and debug().
 
 The UEFI intialization state is exported.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl8AQD4ACgkQxIHbvCwF
 GsQqpxAAlt+EmomF8I5oUFZ7RwX3XTBXOU2oWlYt2DbkemZvroiGnWu6MC52K/RD
 sDdJwvIo+5NuzDbGlPqKB/NjhJ4eF2W+vOIKSey8+iCXhTovmCiqc7DzxUm0Ansi
 J0A/fwr3jdqUC1dl4C+ytwxPHQC01kK++8Ln5OptqbM1/DskpF0bspdr2fZG02Gc
 ndOPw0WEJYEdNH18rQaW+7fOADXgJzK1VIwMIhqQszGrOO/M7mbyXZDpHG787iOH
 smz41YL/2n4ExGsU4hdIQNWDmSJuEIWgB0PEeSiLE29O2m5G8eNfsAmHjRrV9U9p
 QEbaREQDxXB1BmlYNr/A2497p5pPfjJGhiPVjuN9vRXCMhbGyh937iOkT0c1TAuu
 aJyD5pqPxuGMUjNzO5foINMT97DuqewHoEf/DTmp4AtVzBZC+NzTiO79J94PQc6+
 xIDomTIM1WWtPlcMyvZfwUrlX33Gh3yOGBTwnXqS/YSzIQ1mqxoE6rFOZihUYRfz
 Rh6vUP8csOEhfm0XXDhwAVTudA53cQbBUOgPLPbS6zxhnvJNWN04zHXatg9unBnw
 mH8E30dBote0Make8Kzv53j/ytFL06AA/jgnvDbEOmE4SP7aYGL+oYxryjIPudz8
 mngRE2x2zlppXknTrYdnOAjlULxxOA88u0XiNi3uIuVJGtEbrfA=
 =wwI2
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-10-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi into next

Pull request for UEFI sub-system for efi-2020-10-rc1

This series comprises error corrections for the UEFI subsystem:

* correct consideration of timestamps for variable authentication
* correct collection of data regions for code authentication
* correct unit tests to test loading dbx
* enable FAT_WRITE as required by the UEFI spec

The boot manager uses log functions instead of printf() and debug().

The UEFI intialization state is exported.
2020-07-05 18:13:12 -04:00
Heinrich Schuchardt
ae54b946ca test: provide tests for efi_image_region_add()
Provide unit tests for efi_image_region_add().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-03 18:03:41 +02:00
Sean Anderson
f9c7d4f99f clk: Add K210 clock support
Due to the large number of clocks, I decided to use the CCF. The overall
structure is modeled after the imx code. Clocks parameters are stored in
several arrays, and are then instantiated at run-time. There are some
translation macros (FOOIFY()) which allow for more dense packing.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
CC: Lukasz Majewski <lukma@denx.de>
2020-07-01 15:01:21 +08:00
Tom Rini
f0e236c8d6 Xilinx changes for v2020.10
Versal:
 - xspi bootmode fix
 - Removing one clock from clk driver
 - Align u-boot memory setting with OS by default
 - Map TCM and OCM by default
 
 ZynqMP:
 - Minor DT improvements
 - Reduce console buffer for mini configurations
 - Add fix for AMS
 - Add support for XDP platform
 
 Zynq:
 - Support for AES engine
 - Enable bigger memory test by default
 - Extend documentation for SD preparation
 - Use different freq for Topic miami board
 
 mmc:
 - minor GD pointer removal
 
 net:
 - Support fixed-link cases by zynq gem
 - Fix phy looking loop in axi enet driver
 
 spi:
 - Cleanup global macros for xilinx spi drivers
 
 firmware:
 - Add support for pmufw reloading
 
 fpga:
 - Improve error status reporting
 
 common:
 - Remove 4kB addition space for FDT allocation
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXvScEQAKCRDKSWXLKUoM
 IeHUAJ9Z1shAlbILuHZKEpqQySLHdUVgBQCff8Nf+wi1rByTrwflKt14MtIsdFY=
 =2Yuu
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.10

Versal:
- xspi bootmode fix
- Removing one clock from clk driver
- Align u-boot memory setting with OS by default
- Map TCM and OCM by default

ZynqMP:
- Minor DT improvements
- Reduce console buffer for mini configurations
- Add fix for AMS
- Add support for XDP platform

Zynq:
- Support for AES engine
- Enable bigger memory test by default
- Extend documentation for SD preparation
- Use different freq for Topic miami board

mmc:
- minor GD pointer removal

net:
- Support fixed-link cases by zynq gem
- Fix phy looking loop in axi enet driver

spi:
- Cleanup global macros for xilinx spi drivers

firmware:
- Add support for pmufw reloading

fpga:
- Improve error status reporting

common:
- Remove 4kB addition space for FDT allocation
2020-06-25 09:33:39 -04:00
Tom Rini
5575f79bda Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into next
- Convert fsl_espi to driver model (Chuanhua)
- Enable am335x baltos to DM_SPI (Jagan)
- Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-19 16:25:50 -04:00
Neil Armstrong
9c55f5d112 board: amlogic: add board doc files to MAINTAINERS
Add the recently added reStructuredText board documentation in the
appropriate MAINTAINERS files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00
Heinrich Schuchardt
c7ff87e0ae doc: random number generation
Add random number generation APIs to the HTML documentation.
Fix style issues.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-14 21:07:20 +02:00
Heinrich Schuchardt
a7813918fe doc: move README.log to HTML documentation
Convert README.log to reStructuredText and add it to the generated HTML
documentation.

Assign doc/develop/logging.rst to the maintainer of LOGGING.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11 20:52:11 -06:00
Tom Rini
1e374089bd cubieboard7: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

While in here, add the doc file to the MAINTAINERS entry.

Cc: Amit Singh Tomar <amittomer25@gmail.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-06-02 17:27:04 -04:00
Tom Rini
ee67ec98c8 m68k: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.

While in here, add the doc file to the MAINTAINERS entry for coldfire.

Cc: Huan Wang <alison.wang@nxp.com>
Cc: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-02 17:27:04 -04:00
Heinrich Schuchardt
f4c1f705aa MAINTAINERS: add dfu.h and dfu.rst to DFU
include/dfu.h and doc/api/dfu.rst belong to the device firmware update
sub-system. So let's add them to DFU in MAINTAINERS.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
51028db1ca MAINTAINERS: add doc/driver-model/ to DRIVER MODEL
The documentation should rest with the same maintainer as the code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Ilias Apalodimas
e4acbe4e34 MAINTAINERS: Add maintainer for EFI variables via OP-TEE
Add myself as maintainer for the OP-TEE related UEFI variable storage.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Christophe Leroy
3b84809b7b MAINTAINERS: POWERPC MPC8XX: Update email address
Our email addresses have changed from @c-s.fr to @csgroup.eu

Update entry in MAINTAINERS

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2020-05-15 14:47:35 -04:00
Chunfeng Yun
c01a7773a5 MAINTAINERS: MediaTek: add USB related files
Add dt-binding files of xhci-mtk and phys, C files of
phys.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Heinrich Schuchardt
661c02ceb2 MAINTAINERS: assign test/py/tests/test_efi*/ to EFI PAYLOAD
Some UEFI related files are not assigned currently. Add them to the
EFI PAYLOAD area.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30 10:25:07 +02:00
Amit Singh Tomar
dd786d4c4c MAINTAINERS: add entry for cubieboard7 config
This commit adds entry for cubieboard7 config under Actions Semi
OWL family.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
b1a6bb3b59 arm: actions: Add common framework for Actions Owl Semi SoCs
This commit adds common arch support for Actions Semi Owl
series SoCs and removes the Bubblegum96 board files.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Tom Rini
62c59545ba Merge tag 'ti-v2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix boot on am335x guardian board
- Increase OPSI speed on AM65x and J721E devices
- Use JTAD register for identifying K3 devices.
- Update TI entry in MAINTAINERS file.
2020-04-20 11:14:22 -04:00
Heinrich Schuchardt
395041b2fd test: log functions with CONFIG_LOG=n
If CONFIG_LOG=n, we still expect output for log_err(), log_warning(),
log_notice(), log_info() and in case of DEBUG=1 also for log_debug().

Provide unit tests verifying this.

The tests depend on:

	CONFIG_CONSOLE_RECORD=y
	CONFIG_LOG=n
	CONFIG_UT_LOG=y

It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to
accommodate CONFIG_CONSOLE_RECORD=y.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Heinrich Schuchardt
befadde0a2 log: syslog driver
Provide a log driver that broadcasts RFC 3164 messages to syslog servers.
rsyslog is one implementation of such a server.

The messages are sent to the local broadcast address 255.255.255.255 on
port 514.

The environment variable log_hostname can be used to provide the HOSTNAME
field for the messages. The optional TIMESTAMP field of RFC 3164 is not
provided.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Lokesh Vutla
16c2a979fc MAINTAINERS: update entry for ARM TI
Add all TI specific drivers, include, arch files under ARM TI entry.
Driver files are added only if there is no entry for the specific
subsystem in MAINTAINERS file.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-04-14 15:44:48 +05:30
Ashok Reddy Soma
5028358a6a watchdog: versal: Add support for Xilinx window watchdog
Add support for Xilinx window watchdog, which can be found on
Versal platforms.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-06 12:52:45 +02:00
Marek Behún
3e29bd268d MAINTAINERS: add myself as maintainer of fs/btrfs
Signed-off-by: Marek Behún <marek.behun@nic.cz>
2020-03-27 15:42:04 -04:00
Marek Vasut
cb11eed23d MAINTAINERS: Add usb.h entry to usb
Add usb.h file into the USB list.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
2020-03-27 15:42:04 -04:00
Patrice Chotard
d21ffa2a2e MAINTAINERS: update entry for ARM STI
Add STi drivers/include files and git tree.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-13 09:30:30 -04:00
Arthur Li
d55e4e74ce mmc: ca_dw_mmc: add DesignWare based DM support for CAxxxx SoCs
Initial DesignWare based DM support for Cortina Access CAxxxx SoCs.

Signed-off-by: Arthur Li <arthur.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-03-09 08:33:13 +08:00
Patrick Delaunay
efa667d38b doc: add board documentation for stm32mp1
Change plain test README to rst format and move this file
in documentation directory.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-02 09:41:32 +01:00
Heinrich Schuchardt
080cc0b1b3 MAINTAINERS: set maintainer for doc/api/efi.rst
doc/api/efi.rst belongs to the UEFI sub-system documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-25 11:39:54 -05:00
Alex Nemirovsky
800775eb49 MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.
Assign Alex Nemirovsky as custodian for all
Cortina Access (CA) for ARM and MIPS based SoCs.

Currently Cortina Access CAxxxx family of SoCs support both
ARM and MIPS ISA.  Drivers have cross platform support for
both architectures.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07 13:59:58 -05:00
Sam Protsenko
586a1bf5b2 doc: android: Convert to Sphinx format
Convert Android documentation from regular txt format to Sphinx (RST).
Also add Android index.rst file and reference it in root index.rst, so
that Android documentation is visible.

Test:

    $ make htmldocs
    $ xdg-open doc/output/index.html

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Sughosh Ganu
3e63598308 MAINTAINERS: Add entry for rng drivers
Take up maintainership of random number generator drivers with
Heinrich Schuchardt as the reviewer.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-23 07:29:58 -05:00
Stephan Gerhold
293f9ebb94 MAINTAINERS: Add ARM U8500
Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS.
Linus Walleij usually reviews all Ux500 related patches,
so add him as a reviewer.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Lokesh Vutla
713a02a2ce MAINTAINERS: Update ARM TI entry
Take over TI maintainership from Tom.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Andrew F. Davis
9bc97792d8 configs: Add configs for J721e High Security EVM
Add new defconfig files for the J721e High Security EVM.

These defconfigs are the same as for the non-secure part, except for:
    CONFIG_TI_SECURE_DEVICE option set to 'y'
    CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_BOOTCOMMAND uses FIT images for booting

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Sam Protsenko
0c0859cf2d MAINTAINERS: Fix mail
Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change
it to his home mail instead.

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
2020-01-16 09:39:45 -05:00
Heinrich Schuchardt
5c7fa84f4b MAINTAINERS: assign usb.c and and usb_kbd.c
Marek is already maintaining USB. Assign files common/usb.c and
common/usb_kbd.c to him.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-21 20:35:16 +01:00
Matthias Brugger
78b7aa455a MAINTAINERS: Add info for bcm283x
The bcm283x has grown in files, which was not reflected in the
MAINTAINERS file. Fix this by adding the missing entries.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-12-03 08:43:24 -05:00
Joe Hershberger
2800540d10 Update MAINTAINERS to include environment files
To be maintained by me (Joe) and reviewed by Wolfgang Denk when
available.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-21 08:36:40 -05:00
liu hao
e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00
Heiko Schocher
b61cbbdcab pci: add DM based mpc85xx driver
add DM based PCI Configuration space access support for
MPC85xx PCI Bridge. This driver is based on
arch/powerpc/cpu/mpc85xx/pci.c

In the old driver there is a fix for a hw issue on the
TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I
have no such hardware I did not port this part.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06 16:30:19 +05:30
Eugeniy Paltsev
0563535990 MAINTAINERS: add info about ARC HSDK reset driver
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01 16:45:40 +03:00
Tom Rini
271103ac0b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 improvements
- i.MX7 EHCI bugfix
2019-10-25 13:50:51 -04:00
Tom Rini
c9e50bb12a Second set of u-boot-atmel features and fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdspnqAAoJEB6zHgIOrC/Ixi4IAJEEiCZPu6Z3fbkFX/Um7vCX
 eMTltJN8nz4oiSi3xdx3ejueqWdW3F8VuCkHb0j0bVAhMlUlVgwCzfd0cD+D2iwS
 jkrgzASNAr+JeYKYEdWqqfaUxOCd2qfuBu9EXlpvKQLWLt+KRfsOsHWcgR4bf095
 aGCihvd/fKhKYUvbf5cEQnsWa3UwtsKk4Web5MKjxXx3p0iVNlu4KLd/vDWfTios
 X1NqiO5ZjXNrDxyG6Aj8lgDXlE5kfeKaN/aCJU1/0U2cXm8JRu2w2dv1P/e/kU+j
 NHIGzICAG4Lk/4gQTeuohJxLyvj7K3i1H12ik9Qeh4H1/5fsyybyltGUo7H443s=
 =JYe3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2020.01 cycle

This feature set includes Eugen's work on a new tiny flexcom driver and
eeprom mac retrieval for the sam9x60-ek board.
2019-10-25 13:50:33 -04:00
Eugen Hristev
4c49753ce2 MAINTAINERS: add MICROCHIP_FLEXCOM to at91
Add microchip flexcom driver to at91.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:02:01 +03:00
Jean-Jacques Hiblot
1708a12377 usb: xhci: move xhci.h to include usb
The xhci.h header file is currently located under drivers/usb/xhci
Move it to the include/usb folder to make it available to drivers that
are not under drivers/usb/xhci

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Faiz Abbas
7feafb0ae4 ufs: Add Initial Support for UFS subsystem
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:

- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests

Also register this host controller as a SCSI host controller.

Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Guillaume La Roque
880c0aa91d configs: sei510: rework header and fix userdata size
Move android generic config and boot sequence in meson64_android header
and fix size of userdata to use all eMMC on SEI510.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:51:14 +02:00
Tom Rini
2ada73ea1a MAINTAINERS: Update ARM entry
Fully take over the ARM maintainers entry.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-16 18:09:26 -04:00
Ibai Erkiaga
009ab7b93a firmware: zynqmp: create firmware header
New firmware header to place firmware specific macro and function
declarations. The patch also moves the macros defining PM operations as
well as some helper macros.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Ibai Erkiaga
660b0c77d8 mailbox: zynqmp: ipi mailbox driver
ZynqMP mailbox driver implementing IPI communication with PMU. This would
allow U-Boot SPL to communicate with PMUFW to request privileged
operations.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Rajan Vaja
14723ed544 zynqmp: firmware: Add Xilinx ZynqMP firmware driver
Add simple ZynqMP firmware drive to populate child nodes under
zynqmp_firmware DT node.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Michal Simek
13210cd951 arm64: versal: Also record versal name to versal fragment
Just to make sure that also drivers with versal name are assigned to proper
fragment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Maxime Ripard
9bd9b2bcbe MAINTAINERS: Update my email address
I'm not at bootlin anymore, and my mail address doesn't work any longer.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-06 15:20:53 -04:00
Ley Foon Tan
12e800cdab MAINTAINERS, git-mailrc: Update the maintainer for socfpga
This updates MAINTAINERS and git-mailrc to add me as maintainer for
socfpga.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
2019-10-04 12:21:23 -04:00
Priyanka Jain
87d5b22558 MAINTAINERS: Change fsl-qoriq, mpc86xx, mpc85xx maintainers
Change maintainers to Priyanka Jain for fsl-qoriq, mpc85xx

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-09-13 10:14:45 -04:00
Patrick Delaunay
8c018234ea MAINTAINERS: update ARM STM STM32MP and STM32MP1 BOARD
Add the missing driver and files for mach-stm32mp / stm32mp1 product.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Igor Opaniuk
0d6c7c60ea MAINTAINERS: Add entries for Android A/B and AVB
1. Add myself as Android A/B and AVB maintainer
2. Add Sam Protsenko as Designated reviewer for A/B

Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-08-11 16:43:41 -04:00
Manivannan Sadhasivam
379e574f7a MAINTAINERS: Add entry for HI3660 SoC
Add MAINTAINERS entry for HI3660 SoC by adding the arch includes.
While doing so, adding myself as the co-maintainer for HISILICON
SoCs since I'm planning to maintain HI3660 SoC separately and considering
doing improvements to the existing HiSilicon SoC architecture.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11 16:43:41 -04:00
Ryder Lee
8702e614d9 MAINTAINERS: MediaTek: add MediaTek team in the entry
Add MediaTek team as designated reviewer.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-07 15:31:03 -04:00
Heinrich Schuchardt
73d95c24a5 doc: integrate UEFI documentation into Sphinx toctree
Change the UEFI documentation to Sphinx style and integrate it into the
rest of the Sphinx generated documentation.

Remove the inaccurate TODO list in doc/uefi/uefi.rst.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30 21:36:22 +02:00
Tom Rini
92430b8fc8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpga
- Various gen5 fixes
2019-07-29 09:03:11 -04:00
Tom Rini
df9a7a195b u-boot-imx-20190719
- CCF for i.MX6
 - nandbcb command to write SPL into NAND
 - Switch to DM (i.MX28)
 - Boards: Toradex, engicam, DH
 - Fixes for i.MX8
 - Fixes for i.MX7ULP
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0y6dgPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3iDYL/AgznVr7kSHoYpSGfBp8pH3R1UdUiQFg437+
 9/wqMJM5Txm1aK7qTW2u5I7qzIpGw0LMPZ7CDQhWJa1Z0hdNWf/1lMzCVOPvCl1v
 C0TK5hx3ufyfgpkGdkPvVXTmn0f8tdiqtS8zQOLVntPe5dIuOySS0MbD9K4Xewfm
 sVYO0p6F1q+EHbRGw33kIX3/ST8wuj7Iki0AFiZ2hAImHO7UeZP2X3k31kbhs+ZB
 /uhUit3Rn0nc5sIqiiP6Ptfjp8eq13LwWbSwJzezCQssmkTn14z6rrgwUcNuXNlh
 Vi88kJr2ObkFgwUpQCWss+sHzyJQkTX/iLz52FCWB4Ruzr6zGr/4ONLT/iDP0Ydl
 ncO3v8uqLpAeB7kdkt8JRJhq62qihdZc6mdN2YJoCYUZSlR3gxzKmXvT+drglsOi
 B78KoU/MgQ10REQ9IoTRLhQc1gwTF8LJSyfz5hjRGoMhD/Ek5WAQJaMlxDg67Ai8
 HB4lUNjkCV58HdP1+zIWJbbxrDc/lg==
 =LNOs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190719' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20190719

- CCF for i.MX6
- nandbcb command to write SPL into NAND
- Switch to DM (i.MX28)
- Boards: Toradex, engicam, DH
- Fixes for i.MX8
- Fixes for i.MX7ULP

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27 09:35:05 -04:00
Tom Rini
222701e157 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- fix for fsl_qspi read timeout (Thomas)
- spi-mem read data size fix (Ye Li)
- SiFive SPI driver, mmc_spi flags (Bhargav, Anup)
- Micron spi-nor parts (Ashish)
- MT7629 spi-mem driver(Weijie)
2019-07-27 09:34:07 -04:00
Weijie Gao
1f174689c1 spi: Drop obsolete mtk_qspi driver references
Since u-boot has added the spi-mem framework and replaced
the spi-nor framework, the mtk_qspi is no longer compatible
with the new spi-nor driver.

Remove this driver along with replacing config item
with new mtk spi-nor driver.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
[jagan: squash related changes and update commit message]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-25 18:52:20 +05:30
Weijie Gao
603fcd16b1 spi: add spi-mem driver for MediaTek MT7629 SoC
This patch adds spi-mem driver for MediaTek MT7629 SoC
to access SPI-NOR and SPI-NAND flashes.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
[jagan: squash MAINTAINERS file]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-25 18:52:12 +05:30
Tom Rini
ff8c23e784 - add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
 - use kernel qspi compatible string for stm32
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdNrGIAAoJEOKyvdngqpN1SVQH+gKENb24GRDN0VReylxbAB+v
 eEIN51GdnmwV2nxDAcpswUF9Vsf4rE5ZNO4qFDubvFEIltMknE6VBi1ywSqQKI4P
 Ft8xHX/xvTJ8hppVrCf0/nWCcULBesknbFncTlyey0AHUoqamKdQknp5wV7eC6sI
 IqpLV09i1Ftswc7XhYLpCsYpfmv15iGtZnvVtUAN1c/ArM9T1ZrApXrnJ/R3+/Xc
 ih0LMJr2tfEOHBEn03WcB9bMKmEqytQEv70nVcZ15ORw7Wh1vL+Lu5EGNv5HazF3
 AY/PnQ2P+J2v2OgrKjhEl7sUGDVBcanqchiaJzdnjYqy3uGXaJngNAV7hMqpsV4=
 =C8bt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190723' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
- use kernel qspi compatible string for stm32
2019-07-23 14:16:21 -04:00
Fabien Dessenne
5dca7d1881 MAINTAINERS: Add stm32 remoteproc driver
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-07-22 09:21:28 +02:00
Simon Goldschmidt
690c12965f sysreset: socfpga: stratix10: add sysreset driver
This adds a UCLASS_SYSRESET sysreset driver for socfgpa stratix10.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-21 12:45:10 +02:00
Simon Goldschmidt
1f1668883d sysreset: socfpga: gen5: add sysreset driver
This adds a UCLASS_SYSRESET sysreset driver for socfgpa gen5.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-21 12:45:10 +02:00
Tom Rini
a7e617af88 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-nds32
- Update nds32 MAINTAINERS from Macpaul to Rick.
2019-07-19 10:12:06 -04:00
Bryan O'Donoghue
5fbc667d8a MAINTAINERS: Update lib/optee with my details
Commit 32ce6179fb ("optee: Add lib entries for sharing OPTEE code across
ports") adds code into lib/optee but neglects to update MAINTAINERS to make
me buggable for questions and maintenance.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-07-19 15:14:06 +02:00
Lukasz Majewski
37d7337361 clk: Add MAINTAINERS entry for clocks (./drivers/clk/)
The clock subsystem needs active maintenance as it steadily grows.
I do offer my help for this task.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 14:50:30 +02:00
Rick Chen
995fa61fc3 MAINTAINERS: Remove Macpaul and add Rick as nds32 maintainer
Macpaul have left Andestech for a while, and this mail address
macpaul@andestech.com can not received mail anymore.

It might encounter account creation problem in this switching
to gitlab about nds32 tree.

So change the nds32 maintainer as Rick Chen <rick@andestech.com>

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
2019-07-19 15:09:57 +08:00
Heinrich Schuchardt
69fbf238c1 net: assign maintainer for include/net.h
include/net.h currently has no maintainer.

Assign include/net.h to the maintainer of the NET subsystem.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-18 16:37:13 -05:00
Patrice Chotard
9421781466 MAINTAINERS: Add git custodians for ARM STM STM32MP entry
Add git custodians for STMicroelectronics STM32MP entry.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12 11:50:53 +02:00
Fabien Dessenne
b04553ec9a MAINTAINERS: Add stm32 mailbox IPPC driver
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12 11:18:53 +02:00
Ramon Fried
914026d258 drivers: pci_ep: Introduce UCLASS_PCI_EP uclass
Introduce new UCLASS_PCI_EP class for handling PCI endpoint
devices, allowing to set various attributes of the PCI endpoint
device, such as:
* configuration space header
* BAR definitions
* outband memory mapping
* start/stop PCI link

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-11 10:05:15 -04:00
Breno Matheus Lima
656d8da9d2 doc: Remove duplicated documentation directory
Commit ad7061ed74 ("doc: Move device tree bindings documentation to
 doc/device-tree-bindings") moved all device tree binding documentation
to doc/device-tree-bindings directory.

The current U-Boot project still have two documentation directories:

- doc/
- Documentation/

Move all documentation and sphinx files to doc directory so all content
can be in a common place.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-06-20 10:57:08 -04:00
Bin Meng
131816415b MAINTAINERS: Update git repo links
Update all git repo links with the new gitlab ones.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
2019-06-20 10:57:08 -04:00
Marek Vasut
d04ecc4c33 sh: Add myself as SH maintainer
Add myself as an SH maintainer.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>
2019-06-20 10:57:08 -04:00
Patrice Chotard
5fa8fe105e MAINTAINERS: Remove Christophe Kerello from STM32MP entry
Christophe will not have maintainer activities, so remove its name.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Christophe Kerello <christophe.kerello@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-18 16:38:08 +02:00
Ramon Fried
0dfe442e87 MAINTAINERS: change Ramon Fried email address
Change my email address, too many mails
gets to my private mail, created specific email
account just for developmement.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2019-06-14 10:09:15 -04:00
Tom Rini
2702646bc0 - Add Ethernet support for STM32MP1
- Add saveenv support for STM32MP1
 - Add STM32MP1 Avenger96 board support
 - Add SPI driver suport for STM32MP1
 - Add watchdog support for STM32MP1
 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJc+TqsAAoJEMrHeC97M/+miKwP/3OouX3slblEfUELRj/9qLlU
 ypdUDKDQupGSrTIyhJHFdGbA2ct/ERl4mH/kU8NNeCHVCsdvrrmuw+k4jfVZfIyi
 d9gWmU5WanNPzdWwdo0NrVNXjN5LPduxeUCYHdDEggDJuG3YL4LA9pPyrWpL8o8t
 tLPr8YMB1u5Ab8Vn/1A9lKvmw98V59LmWVxZh0AtAdOTvWgEZQe1R5Vex+MHacnK
 uR/Dm3ry5v7ZlR/kMZ0C+Ip1aw9GU4e+O+LCGlU4Jr0GV2XQOr4ehxWtN02nYubc
 sYXbkW7UArR0I0g8YPXPoBI9PToi57bHW/TXKoI8yDIll7vZ9PDjT/FbUJM9rv72
 WU6T7+K2DeHflmp4NljiesD2rDnti0XSCbe4o5o/jD+YkzH6YoJbco4nsae7TBSM
 R3rgV7/+St7zC1IjFq0TUG+S9qSUmZqA4k66+j5/SS6pLQOW3dYemL0/up2cRX5w
 dx00JTQkHyh7Q/GfH8r7yZqIToW9djB9HeT88ovPUCh8rVfDqNn8/WKd2JAfkxda
 QiZDs49BMBsnWpK+vPqiq/suoJeSwDB70iMzrGgBg+mTd9eJcD0c5QBURYE0jm2H
 GqQ04WNi8sLzULhMqKbBdPZhBMzyNmDXF6MC+y/OcUM5k8z6tY8LDro3wgHXWVpX
 DLiFVbkHbLhlUJbeO8dD
 =2C9f
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-boot

- Add Ethernet support for STM32MP1
- Add saveenv support for STM32MP1
- Add STM32MP1 Avenger96 board support
- Add SPI driver suport for STM32MP1
- Add watchdog support for STM32MP1
- Update power supply check via USB TYPE-C for STM32MP1 discovery board
2019-06-11 17:22:22 -04:00
Fabio Estevam
6ad85a45e2 MAINTAINERS: Add imx dts files to i.MX maintainers list
Add imx dts files to the MAINTAINERS file list, so that i.MX
devicetree related patches can be properly sent to the i.MX folks.

Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-06-11 10:42:48 +02:00
Patrice Chotard
a2a89b2e21 spi: stm32: Add Serial Peripheral Interface driver for STM32MP
Add SPI driver support for STM32MP SoCs family.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:17 +02:00
Patrice Chotard
8c1007a2cb watchdog: stm32mp: Add watchdog driver
This patch adds IWDG (Independent WatchDoG) support for
STM32MP platform.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-06-06 17:40:16 +02:00
Qiang Zhao
0652d9fb1a driver: watchdog: add sp805 watchdog support
sp805 is watchdog on some NXP layerscape SoCs, adding
it's driver. Configs CONFIG_WDT_SP805, CONFIG_WDT, CONFIG_CMD_WDT
needs to be enabled to use it.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Heinrich Schuchardt
1db6ab28b2 MAINTAINERS: assign include/charset.h
Assign include/charset.h to EFI PAYLOAD.

The functions defined in this include are used by the UEFI sub-system.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Tom Rini
86f578ee85 - mscc: small fixes, enhance network support for Serval, Luton amd
Ocelot
 - mt7620: rename arch to more generic name mtmips
 - mips: pass initrd addresses via DT as physical addresses
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlzMa60ACgkQKPlOlyTy
 XBg3FBAAl5I1zNoyEQBuSpe+++0fNFkug0vV985keJA3iXdskdxE8vpxPv6wAp+w
 IjBX+e04LY7i5iW58E//f/JBjzL1H345nPeuRsflmlDARep1pqgkEAsEUglGiQW+
 ZNDq/aoImWhiiX2nQHnU4ykHNyvIhUOTjldrwU5DfIS2N+8M23pjLhODMsgaNmkd
 WfwYB91oTXRnnecwG8Nd1MJU/Jpcns5y6eYwok8vQwkCyzcfsIEP052m3r2SAUMz
 3hIlz9WKAHc+pYLz2BWbn560KPJHyS0UqfemiT/M0JasIkojJcQwtrWTKj7g7ZOq
 z8XJQ1Ny0xOYQbfbUcvQttBwVXzYQTKy0jS6qi4vB9Q0TgpRP+v//n29IAJA0YkS
 BE3Nq96cCMgKarSFkMFaXifv9flnb/wZRymB42Frb9fqiwM2wX10zhcn7zW8gUYc
 0Mocl+zkUrmtmA3gSspMJr6kkfX629l97RK7wiY0PkTa4OKSqqMR5JxlVQ+vK72N
 f/yxWYxTH/90wfVolTHt52J/hNydEapVFuudL8ffnuLo84BWzOHP3bwQwtB927zV
 g4nHxotTmVErz5Pr2JrwaZEFVI+Sc+wXPz68Z7hzZxeiO5tBAELhvtDKAsf9e1gt
 OFgQwA5cTRWWxLmWxyWY3nEbXVqAIOsdWIDepAUqrIXAI5rmFt8=
 =SZ/W
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mips

- mscc: small fixes, enhance network support for Serval, Luton and Ocelot
- mt7620: rename arch to more generic name mtmips
- mips: pass initrd addresses via DT as physical addresses
2019-05-04 20:02:42 -04:00
Horatiu Vultur
8c211af8f8 net: mscc: ocelot: Update DTS for Ocelot pcb120.
Update device tree for ocelot to add support for ocelot pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:24 +02:00
Tom Rini
b362fe0848 Merge branch '2019-05-03-master-imports'
- Various btrfs fixes
- Various TI platform fixes
- Other fixes (cross build, taurus update, Kconfig help text)
2019-05-03 07:30:55 -04:00
Peng Fan
16a6d51051 MAINTAINERS, git-mailrc: Update the mmc maintainer
Update the mmc maintainer from Jaehoon to me.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marek Vasut <marex@denx.de>
2019-05-03 07:23:17 -04:00
Kever Yang
37dc8aaa18 rockchip: add Kever Yang as co-custodian
This updates MAINTAINERS and git-mailrc to add me as a
co-custodian for rockchip

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Tom Rini <trini@konsulko.com>
2019-05-01 00:00:05 +02:00
Andrew F. Davis
0a4b11b027 configs: Add configs for AM65x High Security EVM
Add new defconfig files for the AM65x High Security EVM.

This defconfigs are the same as for the non-secure part, except for:
    CONFIG_TI_SECURE_DEVICE option set to 'y'
    CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
    CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
2019-04-26 17:51:51 -04:00
Andrew F. Davis
508369672c arm: mach-k3: Add secure device build support
K3 HS devices require signed binaries for boot, use the SECDEV tools
to sign the boot artifacts during build.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
2019-04-26 17:51:51 -04:00
Andrew F. Davis
3a543a8084 arm: mach-k3: Add secure device support
K3 devices have High Security (HS) variants along with the non-HS already
supported. Like the previous generation devices (OMAP/Keystone2) K3
supports boot chain-of-trust by authenticating and optionally decrypting
images as they are unpacked from FIT images. Add support for this here.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
2019-04-26 17:51:51 -04:00
Tom Rini
1c64692df2 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-04-26 13:49:58 -04:00
Tom Rini
ceb6ddbc73 - Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
 - Add support for the Libretech-AC AML-S805X-AC board
 - Add Amlogic AXG reset compatible
 - Add I2C support for Amlogic AXG
 - Fix AXG PIN and BANK pinctrl definitions
 - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
 - Add initial support for Amlogic G12A SoC and U200 board
 - Enable PHY_REALTEK for selected boards
 - Fix Khadas VIM2 README
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvtmpAAoJEHfc29rIyEnRc78P/0vN7zuxfSganTctZJGyrika
 9i3aIwr03KaFJJKg2FpnjMvdoYfjbuQoJmCdtgyO5Gzw/E5m3b8zbOwxoXW0r8Mg
 56fTSh8my8XHxnrc+Ryv+qwnf8SRIDv7apNqk6vpmnq3OC6di/Z/BBi7jT/ptNm+
 fT/VvQDZkPl5Em3kO1899dpZ7mk5WBwrBeD3R8hrrHtpF45zlRXKPIA/rlcT01DD
 w1gKL7n8NNuV+PHB7fh+xYYW7XkZpINqg6RbEi4w/DpM9Piys4XlB8+W361OkU3O
 Mk0u4omb6ahVIzV7AT4/Xz7B6edO/JpuCkLF0CCIzWo6TBT4Dpkz2h0wVaUCuZBC
 /mykRIgYmFCtdFuUuklf12xKA2VzNfEqk+mzyohDwTxdpWnKZOyX+OfR6Y2PKL8Y
 qSSDYkgucf16SIDBXu8/uVI0RCLtCfza68/Py63Hu9tzFWrG3tC94j3xmXAt+gBA
 Rg25xQ+KfX6oEGbHpViBJDLDWZDzqRPlkAdp3mb08Zpq9cynQSfM5dyS02YnEod7
 80uyva2Bq8S5a2NQYtLJRim54N2rM4srgFFFS0Qw4Feqv7KRkbZl37mTraOLKFo+
 h8t2EQnlaiIzWEKwXmgd7eXS3wV3lsVDn1q/UzBdqkPgp4HQcBsUONh5dxrD5Bvq
 bm6hYo2+hqt583THUltr
 =Qb3V
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogic

- Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
- Add support for the Libretech-AC AML-S805X-AC board
- Add Amlogic AXG reset compatible
- Add I2C support for Amlogic AXG
- Fix AXG PIN and BANK pinctrl definitions
- Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
- Add initial support for Amlogic G12A SoC and U200 board
- Enable PHY_REALTEK for selected boards
- Fix Khadas VIM2 README
2019-04-24 12:26:25 -04:00
Simon Goldschmidt
a339f5249d socfpga: add Simon Goldschmidt as co-custodian
This updates MAINTAINERS and git-mailrc to add me as a
co-custodian for socfpga.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2019-04-24 17:01:38 +02:00
Jerome Brunet
f5abfed8e9 clk: create meson directory and move related drivers
In order to support the Amlogic G12A clock controller,
re-architect the clock files into a meson directory.

No functionnal changes.

MAINTAINERS entry is also updated.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:09 +02:00
Heinrich Schuchardt
dab8788a8c cmd: add exception command
The 'exception' command allows to test exception handling.

This implementation supports ARM, x86, RISC-V and the following exceptions:
* 'breakpoint' - prefetch abort exception (ARM 32bit only)
* 'unaligned'  - data abort exception (ARM only)
* 'undefined'  - undefined instruction exception

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22 12:06:39 -04:00
Eugeniy Paltsev
15736e288e ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards
Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys
ARC devboards. It is created to switch ARC devboards to use DM_MMC.

It required information such as clocks (Bus Interface Unit clock,
Card Interface Unit clock) and SDIO bus width.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00