Commit graph

9619 commits

Author SHA1 Message Date
Tim Harvey
6db1085623 board: gateworks: venice: add imx8mp-gw71xx-2x support
The Gateworks imx8mp-venice-gw71xx-2x consists of a SOM + baseboard.

The GW702x SOM contains the following:
 - i.MX8M Plus SoC
 - LPDDR4 memory
 - eMMC Boot device
 - Gateworks System Controller (GSC) with integrated EEPROM, button
   controller, and ADC's
 - PMIC
 - SOM connector providing:
  - eQoS GbE MII
  - 1x SPI
  - 2x I2C
  - 4x UART
  - 2x USB 3.0
  - 1x PCI
  - 1x SDIO (4-bit 3.3V)
  - 1x SDIO (4-bit 3.3V/1.8V)
  - GPIO

The GW71xx Baseboard contains the following:
 - 1x RJ45 GbE (eQoS from SOM)
 - off-board I/O connector with I2C, SPI, UART, and GPIO
 - Front Panel bi-color LED
 - re-chargeable battery (for RTC)
 - PCIe clock generator
 - 1x USB Type-C connector supporting USB 2.0 host mode with VBUS
 - 1x MiniPCIe socket with SIM, PCI/USB 3.0 (mux), and USB 2.0
 - GPS
 - Accelerometer
 - EERPOM
 - Wide range DC input supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-10-16 08:46:01 +02:00
Alexey Romanov
9a04e36170 sandbox: defconfig: enable CONFIG_SM option
We use this option to test UCLASS_SM.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230921081346.22157-6-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-15 12:23:48 +02:00
Tom Rini
6961ca0a46 Xilinx changes for v2024.01-rc1 v3
clk:
 - remove additional compatible strings for Versal NET
 
 net:
 - zynq_gem: Fix clock calculation for MDC for higher frequencies
 
 pinctrl:
 - core: Extend pinmux status buffere size
 - zynqmp driver: Show also tristate configuration
 
 test:
 - add test case for pxe get
 
 Xilinx:
 - describe SelectMAP boot mode
 
 Zynq:
 - Fix nand description in DT
 
 ZynqMP:
 - DTS sync patches with kernel and also W=1 related fixes
 - Add support for KD240, zcu670, e-a2197 with x-prc cards, SC revB/C with i2c
   description for other SC based boards
 - k24 psu_init cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZSjvwAAKCRDKSWXLKUoM
 IR34AJ92oum3pJXKxKREEZh0dCfDvJlE/wCggyzxI2T5liJfRG5jzlUuDjiLLU0=
 =u1bz
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2024.01-rc1-v3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2024.01-rc1 v3

clk:
- remove additional compatible strings for Versal NET

net:
- zynq_gem: Fix clock calculation for MDC for higher frequencies

pinctrl:
- core: Extend pinmux status buffere size
- zynqmp driver: Show also tristate configuration

test:
- add test case for pxe get

Xilinx:
- describe SelectMAP boot mode

Zynq:
- Fix nand description in DT

ZynqMP:
- DTS sync patches with kernel and also W=1 related fixes
- Add support for KD240, zcu670, e-a2197 with x-prc cards, SC revB/C with i2c
  description for other SC based boards
- k24 psu_init cleanup
2023-10-13 08:45:55 -04:00
Udit Kumar
fa0a3d95fc configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM
The malloc capacity in DRAM at R5 SPL is set to 1MB which isn't
sufficient to load the new tispl.bin to
enable loading of tispl.bin the size is increased by 256KB to 1.25MB.

Cc: Nikhil M Jain <n-jain1@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Nikhil M Jain <n-jain1@ti.com>
2023-10-12 14:06:04 -04:00
Roger Quadros
174b34f4f3 board: ti: am64x: Switch to standard boot flow
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.

Drop header files that are no longer needed in am64x_evm.h.
k3_dfu.h is available via k3_dfu.env in am64x.env.

Drop unused macro CFG_SYS_SDRAM_BASE1.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-10-12 14:06:04 -04:00
Alexey Romanov
36957bde63 ad401: enable USB stack
Currently we have all drivers for use USB stack on A1-series
SoC's. Let's enable USB options for the Amlogic AD401 reference A1
SoC board.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231005085434.74755-9-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-10-12 13:39:41 +02:00
Tom Rini
6e0a75d316 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-11 13:22:32 -04:00
Andrew Davis
1a1d48e36a configs: Make TI_SECURE_DEVICE default for K3
All K3 boards now are secure by default, instead of setting this in each
defconfig, make it implied by the ARCH config.

The only exception is IOT2050, which I do not believe will have any
problems with being a TI_SECURE_DEVICE, but for now turn it off to keep
its config the same.

Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Tom Rini <trini@konsulko.com>
2023-10-11 13:22:32 -04:00
Andrew Davis
a5b85ec406 configs: am65x: Merge the HS and non-HS defconfigs
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.

Non-HS devices will continue to boot due to runtime device type detection.

Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-10-11 13:22:32 -04:00
Andrii Chepurnyi
0501c997a0 board: xen: introduce virtio-blk support
Added new xenguest_arm64_virtio_defconfig which
enables support for virtio-blk using various types
of transport like virtio-pci, vrtio-mmio. Currently
supported: up to 2 PCI host bridges and 10 MMIO devices.
Note: DT parsing code was partly taken from pci-uclass.c
Limitation: All memory regions should be
below 4GB address space.

Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
2023-10-11 10:46:23 -04:00
Tom Rini
5ae883c716 Merge tag 'fsl-qoirq-2023-10-10' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Drop legacy PPA secure FW support
support for MC reserved memory
reset the FLSHxCR1 registers for nxp_fspi
2023-10-11 10:21:33 -04:00
Laurentiu Tudor
b60274e690 configs: layerscape: delete defconfigs using legacy PPA secure FW
PPA was a secure firmware developed in-house which is no longer
supported and replaced by TF-A quite some years ago. This makes
the defconfigs that make use of PPA obsolete, so remove them.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
 [Merged part 1 and part 2]
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-10-10 10:13:32 +08:00
Patryk Biel
3d0fa4a438 ARM: vexpress_ca9x4: Add missing flash width config option
Allow for a proper configuration of CFI flash banks avaialble on the vexpress_ca9x4
board. Without this option, the CFI flash incorrectly detects that the board has two
banks of 32MB flash devices, while in reality, the board provides
two flash banks, each with 64MB size. As a result, it becomes impossible to e.g. to
save u-boot env in flash. According to device tree for this board and
its implementation in QEMU, the CFI width should be set to 32 bits.

After applying this fix, CFI flash will correctly detect both flash
banks each with a size of 64MB. As as result the functionality of e.g. saving u-boot
env will work correctly.

Tested on QEMU 6.2.0.

Cc: Kristian Amlie <kristian.amlie@northern.tech>
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
Reviewed-by: Kristian Amlie <kristian.amlie@northern.tech>
2023-10-09 15:24:31 -04:00
Michal Simek
46f0408771 arm64: zynqmp: Add support for vck190 revB system controller
There are some changes between revA and revB boards. u39 8T49N240 was
removed and also three ina226 at 42/43/44 addresses (u178/u180/u182).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/461cfe5b2b882365413f90d19efd8abcd6be56ed.1695808407.git.michal.simek@amd.com
2023-10-09 12:12:29 +02:00
Tom Rini
d9bb6d779b Merge tag 'u-boot-rockchip-20231007' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add Board: rk3568 Bananapi R2Pro;
- Update pcie bifurcation support;
- dwc_eth_qos controller support for rk3568 and rk3588;
- Compressed binary support for U-Boot on rockchip platform;
- dts and config updates for different board and soc;

[ trini: Fix conflict on include/spl.h ]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-08 09:58:55 -04:00
Jonas Karlman
7ecc90f1fd rockchip: rk356x: Enable poweroff command
With PMIC_RK8XX, SYSRESET and CMD_POWEROFF options enabled it is
possible to power down a board using the poweroff command and turn the
board back on using a power button.

Enable the poweroff command on RK356x boards that have a button wired
to PMIC pwron.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:50:15 +08:00
FUKAUMI Naoki
992f297e35 configs: rockchip: rk3308: enable CONFIG_OF_LIBFDT_OVERLAY
enable CONFIG_OF_LIBFDT_OVERLAY and use it on Radxa ROCK Pi S.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
2023-10-07 16:49:41 +08:00
FUKAUMI Naoki
667742a918 configs: rockchip: rk3308: use CONFIG_DEFAULT_FDT_FILE
all rk3308 boards should use their own dtb file.

also, change fdt_addr_r to avoid following error:
 "ERROR: Did not find a cmdline Flattened Device Tree"
it happens on Radxa ROCK Pi S (256MB/512MB) with kernel built from
Radxa BSP.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
2023-10-07 16:49:41 +08:00
FUKAUMI Naoki
8952b3857b arm: dts: rockchip: rock-5b: add support for PCIe3 and NVMe
this patch adds support for PCIe3 (M.2 M key) and enables NVMe.

 => pci
 BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
 _____________________________________________________________
 00.00.00   0x1d87     0x3588     Bridge device           0x04
 01.00.00   0x10ec     0x8125     Network controller      0x00
 02.00.00   0x1d87     0x3588     Bridge device           0x04
 03.00.00   0x1179     0x011a     Mass storage controller 0x08
 => nvme scan
 => nvme info
 Device 0: Vendor: 0x1179 Rev: AGHA4101 Prod: 79CA20WPKRYN
             Type: Hard Disk
             Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512)

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
FUKAUMI Naoki
bd9798b259 configs: rockchip: rock-pi-s: use default bootdelay (2s)
align with other boards.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Massimo Pegorer
b9155e754e configs: rockchip: add DOS_PARTITION to RK3308 boards defconfig
Without DOS_PARTITION support U-Boot is not able to boot an OS stored
into an SD card with MBR partitions table. This is still a quite common
case so add DOS_PARTITION (only for U-Boot proper build) to Rockchip
RK3308 EVB, Radxa ROCK Pi S and Firefly roc-rk3308-cc boards: they are
the only RK boards missing of DOS_PARTITION.

Reported-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Frank Wunderlich
3d96c3f5ec board: rockchip: Add Bananapi R2Pro Board
Add Bananapi R2 Pro board.

tested:
- sdcard
- both front usb-ports
- sata
- wan-port

lan-ports are connected to mt7531 switch where driver needs to be
separated from mtk ethernet-driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
2023-10-07 16:49:41 +08:00
Jonas Karlman
f1aa4cdfbf configs: rockchip: Enable ethernet driver on RK3588 boards
Enable DWC_ETH_QOS_ROCKCHIP and related PHY driver on RK3588 boards that
have an enabled gmac node and drop ETH_DESIGNWARE and GMAC_ROCKCHIP for
remaining RK3588 boards.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Jonas Karlman
25f56459ae configs: rockchip: Enable ethernet driver on RK356x boards
Enable DWC_ETH_QOS_ROCKCHIP and related PHY driver on RK356x boards that
have an enabled gmac node.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Jonas Karlman
683f61a13f rockchip: board: Add minimal generic RK3566/RK3568 board
Add a minimal generic RK3566/RK3568 board that only have eMMC and SDMMC
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3566/RK3568 boards that follow reference board design.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 16:49:41 +08:00
Jonas Karlman
a9e9445ea2 rockchip: rk3568-nanopi-r5: Enable PCIe on NanoPi R5C and R5S
Enable missing PCIe Kconfig options now that PCIe bifurcation is fixed
to make use of the two on-board RTL8125B and the M.2 slot on NanoPi R5C
and NanoPi R5S.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 10:23:32 +08:00
Jonas Karlman
5b155997d4 rockchip: rk3568-nanopi-r5: Update defconfig for NanoPi R5C and R5S
Update and sync Kconfig options for NanoPi R5C and NanoPi R5S with other
RK3568 boards.

SPL_FIT_SIGNATURE is enabled to add a checksum validation of the FIT
payload, also add LEGACY_IMAGE_FORMAT to keep boot scripts working.

OF_SPL_REMOVE_PROPS, SPL_DM_SEQ_ALIAS and SPL_PINCTRL change ensure
pinctrl for eMMC, SD-card and UART2 is applied in SPL.

MMC_HS200_SUPPORT and SPL counterpart is enabled to speed up eMMC load
times from on-board eMMC 5.1 modules.

Drop remaining unused or unsupported options to sync with other RK3568
boards.

Also sync device tree from linux v6.4 and drop u-boot,spl-boot-order and
use the default from rk356x-u-boot.dtsi.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-10-07 10:23:32 +08:00
Simon Glass
9cbdc3a0fc spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDR
Rename this so that SPL is first, as per U-Boot convention. Also add
PAYLOAD_ since this is where in memory the parameters for the payload
have been stored.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06 14:38:11 -04:00
Simon Glass
82e26e0d68 spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...
We like to put the SPL first so it is clear that it relates to SPL. Rename
various malloc-related options which have crept in, to stick to this
convention.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-06 14:38:11 -04:00
Tom Rini
be2abe73df Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
+ ae350: modify memory layout and target name
+ ae350: use generic RISC-V timer driver in S-mode
+ Support bootstage report for RISC-V
+ Support C extension exception command for RISC-V
+ Add Starfive timer support
2023-10-05 13:26:44 -04:00
Neha Malcom Francis
5b2671594b configs: j721e: Remove HBMC_AM654 config
Kernel commit d93036b47f35 ("arm64: dts: ti: k3-j721e-mcu_wakeup: Add
HyperBus node") was merged to kernel without its dependent patch [1].
Similar fix is needed in U-Boot, and hbmc currently breaks boot. Till
this gets fixed in U-Boot, disable the config by default so that the
hbmc probe that happens in board/ti/j721e/evm.c will not take place
and lead to boot failure.

[1] https://lore.kernel.org/all/20230424184810.29453-1-afd@ti.com/

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
2023-10-04 14:16:01 -04:00
Tom Rini
b83e285866 STM32 MCU:
_ alignment with kernel DT v6.5 for stm32f429 and stm32f746
   _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco
 
 STM32 MPU:
   _ alignment with kernel DT v6.6-rc1
   _ add RNG support for stm32mp13
   _ add USB, USB boot and stm32prog command support for stm32mp13
   _ add support of USART1 clock for stm32mp1
   _ only print RAM and board code with SPL_DISPLAY_PRINT flag for
     stm32mp1
   _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc
     for stm32mp15xx DHCOR
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmUdaJccHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/ptHxEACdibF5EoRb40qhQCWB
 mwW50s76xWOyHGOGjSe3l18zxPdBjQ+9rnT8/A+mjaa8he4kMX9EZJyYRogcz7eR
 QcnSeu9Q4L8bKbqnPBOpKF6TN7rFOIUcu+BWp3o8jZ+7/q7OSJrVLsjbXtCuCLnB
 q5Pie/in7hmHJsQr6LJ4r31chW6Zm4VDuFiXquuxyE/c94Q8Ue27ag1/RfXL8b/g
 Ir9aO+PAldGnVdnhPz4e6PZhzMfCVafw+DR7GVx3Zfnx2bg/dajo38UaLBDdEIS1
 EIKONU2CBT/W1kPkLFiz+NdaYCzK9EL+RIbN/iG7ms+ds1+wc3zXpWwqZFASfIod
 ZF788Up+wW+3SrKI2ySFjhQroNzDascn+bbHm4yJuAsORqY0XkxjSuWcSz++q8Hs
 eMTw/R4uMfEiDvN1A7xlhBMuBrBHk4/6bdCRx2R6nkWes542fsgjXy8tGRWyUgnY
 nbpTfYU07N8ck6arZ36KThedD7whJHHRcBYtLjhRG+lKbD0epWy67pXgTr9edTLf
 U6ddH+Tndn4qhx067VhZ8vEXTCzypt4lY61MLcM0b9z8S1nJDn8b8jmiii7IR76L
 /ocXzuLvNWHfmwNnB2hj/YY+n78vlZhegUxL5/6sH9lNebnewyEzCkVENNELUSYf
 8M6vEZprvuhN44Z6hBUWZxXk0w==
 =1mUx
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20231004' of https://source.denx.de/u-boot/custodians/u-boot-stm

STM32 MCU:
  _ alignment with kernel DT v6.5 for stm32f429 and stm32f746
  _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco

STM32 MPU:
  _ alignment with kernel DT v6.6-rc1
  _ add RNG support for stm32mp13
  _ add USB, USB boot and stm32prog command support for stm32mp13
  _ add support of USART1 clock for stm32mp1
  _ only print RAM and board code with SPL_DISPLAY_PRINT flag for
    stm32mp1
  _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc
    for stm32mp15xx DHCOR

[ Fix merge conflict at board/st/common/stm32mp_dfu.c ]
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-04 10:49:30 -04:00
Patrick Delaunay
3ac6cae944 configs: stm32mp13: activate command stm32prog
Activate the command stm32prog with CONFIG_CMD_STM32MPROG.
The CONFIG_SET_DFU_ALT_INFO is also activated to support
the required weak functions for the DFU virtual backen defined in
board/st/common/stm32mp_dfu.c.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:32:41 +02:00
Patrice Chotard
e64e7331c2 configs: stm32mp13: Enable USB related flags
Enable USB related flags.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:32:41 +02:00
Gatien Chevallier
81a751dcd9 configs: default activate CONFIG_RNG_STM32 for STM32MP13x platforms
Default embed this configuration. If OP-TEE PTA RNG is exposed, it means
that the RNG is managed by the secure world. Therefore, the RNG node
should be disabled in the device tree as an access would be denied
by the hardware firewall.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:03 +02:00
Gatien Chevallier
77e0c60879 rng: stm32: rename STM32 RNG driver
Rename the RNG driver as it is usable by other STM32 platforms
than the STM32MP1x ones. Rename CONFIG_RNG_STM32MP1 to
CONFIG_RNG_STM32

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Patrice Chotard
7132729100 configs: stm32f769-disco: Enable VIDEO_LOGO flag
The patch removes the legacy mode of displaying the ST logo and adopts
the approach introduced by the commit 284b08fb51 ("board: stm32mp1: add
splash screen with stmicroelectronics logo").

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
9192b13bc8 board: stm32f746-disco: refactor the display of the ST logo
The patch removes the legacy mode of displaying the ST logo and adopts
the approach introduced by the commit 284b08fb51 ("board: stm32mp1: add
splash screen with stmicroelectronics logo"). It was necessary to use a
specific logo for the stm32f746-disco board.

Furthermore, the previous version didn't properly center the logo, hiding
its upper part.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Dario Binacchi
20af6b897b configs: stm32f746-disco: limit resolution to 480x272
The patch fixes the y-resolution, which was causing the creation of a
framebuffer larger than actually needed, resulting in memory waste.

Fixes: cc1b0e7b8e ("board: Add display to STM32F746 SoC discovery board")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-10-04 13:26:02 +02:00
Heinrich Schuchardt
7cfdacbe80 configs: sifive: enable poweroff command on Unmatched
Powering off the SiFive HiFive Unmatched board is supported both via the
SBI and GPIO sysreset drivers. See device-tree entry

    compatible = "gpio-poweroff".

Enable the poweroff command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 18:23:59 +08:00
Randolph
5f25297637 configs: andes: rearrange SPL mode memory layout
Unify the memory layout for u-boot SPL mode
Add "CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS"

Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-10-04 18:03:02 +08:00
Randolph
b68bf22fbb configs: andes: add vender prefix for target name
Modify "CONFIG_TARGET_AE350" to "CONFIG_TARGET_ANDES_AE350"

Signed-off-by: Randolph <randolph@andestech.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-10-04 18:00:51 +08:00
Tom Rini
65b9b3462b Merge branch 'next_pinctrl_sync' of https://source.denx.de/u-boot/custodians/u-boot-sh
- pinctrl re-sync for Renesas chips
2023-10-02 15:19:02 -04:00
Tom Rini
ec6f06bddc configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 13:58:20 -04:00
Tom Rini
ac897385bb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:55:44 -04:00
Tom Rini
ba6d575ee0 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-02 10:35:27 -04:00
Marek Vasut
30c210b9be ARM: renesas: Align env eMMC device number with Linux 6.5.3 DT changes on R-Car Gen3 Salvator-X
Set U-Boot environment storage eMMC device number to 0, to match
the new additions to DT /aliases node pulled in alongside Linux
6.5.3 DT synchronization.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:29 +02:00
Marek Vasut
6d53b50888 ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boards
Enable DM_ETH_PHY to correctly release the PHY on these boards from reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-10-01 00:08:28 +02:00
Jesse Taube
6ab77bb14f Convert CFG_SYS_UBOOT_START to Kconfig
Commit 65cc0e2a65 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
this meant that the value was no longer available to the Makefile. This
caused imxrt to fail to boot. All the other boards that used this
variable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.

Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-30 15:24:43 -04:00
Jan Kiszka
ec91a96970 configs: iot2050: Disable CONFIG_CONSOLE_MUX
We only have serial as console option, and leaving this on turns on
SYS_CONSOLE_IS_IN_ENV which is also not true for these devices, leaving
an ugly

In:    No input devices available!
Out:   No output devices available!
Err:   No error devices available!

behind.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-09-28 16:31:43 -04:00
Eduard Strehlau
fa5bde3760 smegw01: Fix inverted CONFIG_SYS_BOOT_LOCKED logic
CONFIG_SYS_BOOT_LOCKED means that a restricted boot environment will
be used. In this case, hab_auth_img_or_fail should be called to prevent
U-Boot to continue running when the fitImage authentication fails.

Fix the logic accordingly.

Additionally, select CONFIG_SYS_BOOT_LOCKED by default.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-28 16:31:43 -04:00
Eduard Strehlau
62a3c66a7c smegw01: Use CONFIG_SYS_LOAD_ADDR for loading fitImage
Set CONFIG_SYS_LOAD_ADDR=0x88000000 and use this address for
loading fitImage.

Also pass the standard CONFIG_BOOTFILE option to indicate
the fitImage file.

Signed-off-by: Eduard Strehlau <eduard@lionizers.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-23 18:45:34 +02:00
Ravi Gunasekaran
65adf86f1a configs: am65x_evm_r5_usbmsc_defconfig: Enable DWC3 wrapper for SPL
commit 280f45d239 ("configs: get rid of build warnings due to
SPL_USB_DWC3_GENERIC") missed enabling DWC3 glue layer for
usbmsc_defconfig and this broke boot from USB mass storage.
Fix this by enabling DWC3 glue layer.

Fixes: 280f45d239 ("configs: get rid of build warnings due to SPL_USB_DWC3_GENERIC")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
2023-09-22 13:58:51 -04:00
Simon Glass
3fef0def84 x86: coreboot: Enable VIDEO_COPY
At least on modern machines the write-back mechanism for the frame buffer
is quite slow when scrolling, since it must read the entire frame buffer
and write it back.

Enable the VIDEO_COPY feature to resolve this problem.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:05:40 +08:00
Simon Glass
85c35c794e x86: coreboot: Align options between coreboot and coreboot64
These two builds are similar but have some different options for not good
reason. Line them up to be as similar as possible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:05:40 +08:00
Simon Glass
028d1f8dc2 x86: coreboot: Enable CONFIG_SYS_NS16550_MEM32
The debug UART on modern machines uses a 32-bit wide transfer. Without
this, setting debug output causes a hang or no output. It is not obvious
(when enabling CONFIG_DEBUG_UART) that this is needed.

Enable 32-bit access to avoid this trap.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
b1350636e6 x86: coreboot: Look for DBG2 UART in SPL too
If coreboot does not set up sysinfo for the UART, SPL currently hangs.
Use the DBG2 technique there as well. This allows coreboot64 to boot from
coreboot even if the console info is missing from sysinfo

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
04ecda0e1d x86: coreboot: Enable standard boot
Enable bootstd options and provide instructions on how to boot a linux
distro using coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
350c0df30d x86: coreboot: Add IDE and SATA
Add these options to permit access to more disk types.

Add some documentation as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Simon Glass
9d69324e7f x86: samus_tpl: Correct text base and alloc sizes
Make sure that CONFIG_X86_OFFSET_U_BOOT is the same as CONFIG_TEXT_BASE
as it is changing CONFIG_X86_OFFSET_U_BOOT

Samus boots into U-Boot proper in flash, not RAM. Also expand the SPL
malloc() size a little, to avoid an error.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Thomas Mittelstaedt
fde0df92b5 x86: efi-payload64: Add bootstd support
Enable bootstd support for U-Boot at VirtualBox described at
https://source.denx.de/u-boot/u-boot/-/blob/master/doc/develop/bootstd.rst

This is used to boot system images at Virtualbox via
- distroboot (extlinux.conf)
- boot script

Signed-off-by: Thomas Mittelstaedt <thomas.mittelstaedt@bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Added 'efi-payload64' tag]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Thomas Mittelstaedt
c323921ba9 x86: efi-payload64: Add support for SCSI devices
U-Boot at VirtualBox must load Linux and boot configuration from disk devices.
Here the discs at AHCI (scsi) bus are used to load the needed boot data.

Signed-off-by: Thomas Mittelstaedt <thomas.mittelstaedt@de.bosch.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[Added 'efi-payload64' tag and rebased on top of u-boot/master]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-09-22 06:03:46 +08:00
Venkatesh Yadav Abbarapu
b764e84f9f zynqmp: config: Add proper dependencies for USB
When CONFIG_CMD_USB and CONFIG_USB are disabled, still some compilation
errors are seen as below.

In file included from include/configs/xilinx_zynqmp.h:173,
                 from include/config.h:3,
                 from include/common.h:16,
                 from env/common.c:10:
include/config_distro_bootcmd.h:302:9: error: expected '}' before 'BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB'
  302 |         BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/config_distro_bootcmd.h:302:9: note: in definition of macro
'BOOTENV_DEV_NAME_USB'
  302 |         BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/configs/xilinx_zynqmp.h:77:41: note: in expansion of macro
'BOOTENV_DEV_NAME'
   77 | # define BOOT_TARGET_DEVICES_USB(func)  func(USB, usb, 0)
   func(USB, usb, 1)
      |                                         ^~~~
include/configs/xilinx_zynqmp.h:168:9: note: in expansion of macro
'BOOT_TARGET_DEVICES_USB'
  168 |         BOOT_TARGET_DEVICES_USB(func) \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
include/config_distro_bootcmd.h:454:25: note: in expansion of macro
'BOOT_TARGET_DEVICES'
  454 |         "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
      |                         ^~~~~~~~~~~~~~~~~~~
include/config_distro_bootcmd.h:474:9: note: in expansion of macro
'BOOTENV_BOOT_TARGETS'
  474 |         BOOTENV_BOOT_TARGETS \
      |         ^~~~~~~~~~~~~~~~~~~~
include/configs/xilinx_zynqmp.h:179:9: note: in expansion of macro
'BOOTENV'
  179 |         BOOTENV
      |         ^~~~~~~
include/env_default.h:120:9: note: in expansion of macro
'CFG_EXTRA_ENV_SETTINGS'
  120 |         CFG_EXTRA_ENV_SETTINGS
      |         ^~~~~~~~~~~~~~~~~~~~~~
In file included from env/common.c:32:
include/env_default.h:27:36: note: to match this '{'
   27 | const char default_environment[] = {
      |                                    ^
scripts/Makefile.build:256: recipe for target 'env/common.o' failed
make[1]: *** [env/common.o] Error 1
Makefile:1853: recipe for target 'env' failed
make: *** [env] Error 2
make: *** Waiting for unfinished jobs....

Add CONFIG_USB_STORAGE as dependency for USB related macro's such as
BOOT_TARGET_DEVICES_USB() and DFU_DEFAULT_POLL_TIMEOUT and
CONFIG_THOR_RESET_OFF.

Remove CONFIG_ZYNQMP_USB from Kconfig and also from defconfig since it
is not used anywhere else.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230904031528.11817-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:12 +02:00
Michal Simek
9080abfc0b arm64: versal: Do not define boot command for mini configurations
Mini configuration is not design to boot anything that's why there is no
reason to setup boot command. CONFIG_DISTRO_DEFAULTS is disabled anyway.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/41ac52d946ac53d162c407094dc215e6a932af92.1693902205.git.michal.simek@amd.com
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
e5e6b1ed6c arm64: versal-net: Enable the config CMD_KASLRSEED
Kernel Address Space Layout Randomization (KASLR) is a hardening
feature that aims to make it more difficult to take advantage
of known exploits in the kernel, by placing kernel data
structures at a random address at each boot.The bootloader
supports randomizing the virtual address at which the kernel image
is loaded. The bootloader must provide entropy by passing a random
u64 value in the /chosen/kaslr-seed device tree node.
When we run "kaslrseed" command from U-Boot, the bootloader will
genarate the kaslr-seed and update the /chosen/kaslr-seed DT property.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831031658.2203-4-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
8ae1fab6b1 arm64: versal-net: Enable sha1sum command
Enable it for TPM usage.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831031658.2203-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
18a02b881c arm64: versal-net: Enable TPM for xilinx platforms
TPMs are becoming popular that's why enable drivers and command for it.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831031658.2203-2-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
c5d15db173 arm64: versal: Enable the config CMD_KASLRSEED
Kernel Address Space Layout Randomization (KASLR) is a hardening
feature that aims to make it more difficult to take advantage
of known exploits in the kernel, by placing kernel data structures
at a random address at each boot.The bootloader supports randomizing
the virtual address at which the kernel image is loaded.
The bootloader must provide entropy by passing a random u64 value
in the /chosen/kaslr-seed device tree node.
When we run "kaslrseed" command from U-Boot, the bootloader will
genarate the kaslr-seed and update the /chosen/kaslr-seed DT property.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831032612.2729-4-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
b57fed046e arm64: versal: Enable sha1sum command
Enable it for TPM usage.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831032612.2729-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
7ad9eb785e arm64: versal: Enable TPM for xilinx platforms
TPMs are becoming popular that's why enable drivers
and command for it.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230831032612.2729-2-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:11 +02:00
Venkatesh Yadav Abbarapu
4a5c8e8976 arm64: zynqmp: Enable the config CMD_KASLRSEED
Kernel Address Space Layout Randomization (KASLR) is a hardening
feature that aims to make it more difficult to take advantage
of known exploits in the kernel, by placing kernel data structures
at a random address at each boot.The bootloader supports randomizing
the virtual address at which the kernel image is loaded.
The bootloader must provide entropy by passing a random u64 value
in the /chosen/kaslr-seed device tree node.
When we run "kaslrseed" command from U-Boot, the bootloader will
genarate the kaslr-seed and update the /chosen/kaslr-seed DT property.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230824032712.13399-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-09-21 13:20:10 +02:00
Venkatesh Yadav Abbarapu
b58ced5277 arm64: versal: Increase the number of DRAM banks to 36
HBM stands for high bandwidth memory and is a type of memory interface used
in 3D-stacked DRAM (dynamic random access memory) in some AMD GPUs (aka
graphics cards), as well as the server, high-performance computing (HPC)
and networking and client space. High Bandwidth Memory(HBM) has total 16
channels, one channel is divided into two pseudo channels which makes its
32 banks each with some amount of memory.
And then we have DDR_LOW PS low, DDR_HIGH0 PS high, DDR_HIGH1 PS very high
and pretty much there should be also place for PL DDR. So maximum number of
memory banks will be 36, updating the CONFIG_NR_DRAM_BANKS to 36.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ed9eaf5c20501ee691d7d28a173511cd9a87f161.1690958095.git.michal.simek@amd.com
2023-09-21 13:20:10 +02:00
Shengyu Qu
7d4810cac5 configs: visionfive2: Enable CONFIG_OF_BOARD_SETUP
Enable CONFIG_OF_BOARD_SETUP, so we could use ft_board_setup() to fixup
memory size passed to kernel.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-20 20:26:23 +08:00
Marek Vasut
075e0b9050 ARM: renesas: Enable DM_ETH_PHY on 64-bit R-Car boards
Enable DM_ETH_PHY to correctly release the PHY on these boards from reset.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-17 13:56:34 +02:00
Marek Vasut
ead3a28c14 configs: sandbox: Enable DM_USB_GADGET
Switch sandbox to DM_USB_GADGET, DM is the future.

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-15 23:38:01 +02:00
Tom Rini
d8d1fd0e89 Merge branch 'next_ufs' of https://source.denx.de/u-boot/custodians/u-boot-sh into next
- UFS support and GPIO clock driver
2023-09-09 10:13:37 -04:00
Marek Vasut
9a059a3af5 ARM: renesas: Enable UFS on R8A779F0 S4 Spider
Enable UFS controller driver and matching UFS and SCSI commands. The
former is used to initialize the device, the later is used to perform
low level access to the SCSI interface of the UFS device.

Enable R8A779F0 S4 Spider specific dependencies, the PCA953x driver
and GPIO clock gate driver. This setup is used to toggle 38.4 MHz
clock for the UFS controller.

Enable support for 48bit LBA in block layer to address disks larger
than 512*2^32 ~= 144 PiB. Enable use of 64bit LBA variables in the
rest of U-Boot, instead of the default 32bit ones.

Increase FAT cluster size to 128k as that is what is used by the
filesystem that is populated on the UFS device.

Use 'ufs init && scsi scan' to start the UFS device from U-Boot prompt.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-09 04:53:31 +02:00
Jan Kiszka
17771b3282 configs: am62x_evm_a53_defconfig: Disable semi-functional PSCI reset support
At this point, system shutdown is not supported by the DM firmware
that TF-A calls. As we can't de-select only this feature[1], declare
complete PSCI reset support as non-functional so that we don't signal
incomplete support to the OS via EFI runtime services. This makes
power-off under Linux work again when booting via EFI.

[1] https://uefi.org/specs/UEFI/2.9_A/08_Services_Runtime_Services.html?highlight=efiresetshutdown#resetsystem
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08 10:07:12 -04:00
Nishanth Menon
e91134720a configs: am62x_evm*: Enable EMMC_BOOT configuration
Enable EMMC boot support for AM62x evm base configuration.

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-08 10:07:12 -04:00
Nishanth Menon
355c0afcd4 configs: am62x_evm_a53_defconfig: Switch to bootstd
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.

Suggested-by: Tom Rini <trini@konsulko.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-08 10:07:11 -04:00
Marek Vasut
e342b91a08 configs: sandbox64: Enable legacy image format support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
legacy image format support. This fixes ut_bootstd_bootflow_cmd_menu
test.

Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-09-06 13:51:19 -04:00
Tom Rini
34056394ce Fixes for release
-----------------
 
 - imx9: fix DRAM calculation
 - thermal: fixes
 - fixed for DM, DH and Gateworks boards
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZPbe+Q8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bErACfVU0xBJ7rsbqjUHh18Za1tFwmIGEAnRLB5csC
 XsEElHzqrsNBBCLN3ahx
 =GZAw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230905' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for release
-----------------

- imx9: fix DRAM calculation
- thermal: fixes
- fixed for DM, DH and Gateworks boards

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
2023-09-05 09:05:16 -04:00
Shengyu Qu
f39e24496a configs: starfive: Disable SYS_MALLOC_CLEAR_ON_INIT by default
SPL_SYS_MALLOC_CLEAR_ON_INIT would enable SYS_MALLOC_CLEAR_ON_INIT by
default, but that's not need on JH7110, so disable that.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-09-05 10:53:46 +08:00
Shengyu Qu
dccf4a843a configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2
Although PCIE driver already exists, board defconfig isn't configured to
enable PCIE enum on boot, thus USB storage device and NVME drive are not
supported by default. So modify defconfig to enable PCIE auto enum, then
start USB subsystem and scan nvme drive on boot.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-05 10:53:41 +08:00
Tom Rini
493fd3363f nokia_rx51: Remove platform
This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-04 21:14:32 -04:00
Fabio Estevam
282ff895c8 imx8mm_evk_defconfig: Select CONFIG_IMX_TMU
Select the i.MX8MM thermal driver as it is useful for displaying
the CPU temperature and its grading:

CPU:   Commercial temperature grade (0C to 95C) at 38C

It also prevents booting when the temperature is above the alert
point.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-09-04 17:26:44 +02:00
Tom Rini
ddec4cae62 Prepare v2023.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmT17FsACgkQFHw5/5Y0
 tywn0gwAlRs5NZ4ierzvDiLQEvYgV6E+lLccwyf8mMfJVHicrrW/ckxqJGS2mrLz
 IoA0pO1oF/HFfR/0pgx9Pb2kuIK1tkCeVNYW6t9EDbEJzrbfdvykBcSB4wgKYpgB
 ZgCga0jsPNM951Y3a3TElNEet4pVTZrDLu0E2UR6zNzr5hpKnfoQTZRfBI1MyCq4
 w4/Eo2wAnnaV1lcobg9LzM6uyDnETxWyTI7DIJYSqkEgT0WcF6zrdW55MaXtrPo5
 RZ4q5MTJQwqnTV5awsmgEt8PSC+XQcPHMPrVCwoOZAdru+5zO3AWpbqq1q6K+y9U
 FEsaJ6HGn5BdITgmIK/lb8oTekfOkDPFF3WuFp5bZ6L0A63ANu/MMWHELyyt5+0z
 TlnU94PVxiLnPMzZtfBPWRQ3jIU5qltJaoW0pKwsoa7P8iUd1WZgYyN+G9WPgwFr
 XUemGRNkgnWfRoxcKGbaYDSB0Llp6m/zqPlGfhlt0ZKXc6igLu3/egRh7/8zLR0i
 y9uBKG45
 =s9vZ
 -----END PGP SIGNATURE-----

Merge tag 'v2023.10-rc4' into next

Prepare v2023.10-rc4
2023-09-04 10:51:58 -04:00
Marek Vasut
2629b18ed4 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Plus eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
7e4e4ff6ec ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
bd7606d142 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on DH i.MX8M Plus DHCOM
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects.
Without this change, the board will fail to suspend/resume e.g. in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Tim Harvey
99eb21cfcc board: gateworks: venice: fix gw7904
Add missing imx8mm-venice-gw7904 to CONFIG_OF_LIST

Fixes commit 61e7f97325 ("board: gateworks: venice: add imx8mm-gw7904 support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-09-04 10:21:20 +02:00
Marek Vasut
f58b0c8534 ARM: imx: Select 2 DRAM banks on Data Modul i.MX8M Mini eDM SBC
U-Boot splits DRAM bank spanning addresses below and above the 32bit
boundary into two DRAM banks. Since this platform may come with 4GiB
of DRAM, increase the DRAM bank count to 2.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-09-04 10:21:20 +02:00
Marek Vasut
e47cab0fa1 ARM: imx: Drop CONFIG_USE_BOOTCOMMAND=n on i.MX6 DHSOM
This board certainly does use default 'run distro_bootcmd' boot command,
make sure this is set in 'bootcmd' variable.

Fixes: 970bf8603b ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-09-04 10:21:20 +02:00
Simon Glass
90f626a5d8 rpi: Disable DISTRO_DEFAULTS
Disable this option to reclaim some space, since bootstd requires less
functionality to operate (e.g. hush parser).

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:20:59 +01:00
Simon Glass
c771e5b8c2 arm: rpi: Switch to standard boot
Drop use of the distro scripts and use standard boot instead.

We don't need to specify the mmc devices individually, since they are
used in order from 0 to 2, and standard boot uses that order anyway.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-03 23:20:59 +01:00
Simon Glass
91caa3bb89 event: Use an event to replace last_stage_init()
Add a new event which handles this function. Convert existing use of
the function to use the new event instead.

Make sure that EVENT is enabled by affected boards, by selecting it from
the LAST_STAGE_INIT option. For x86, enable it by default since all boards
need it.

For controlcenterdc, inline the get_tpm() function and make sure the event
is not built in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-31 13:16:55 -04:00
Marek Vasut
77050a7398 configs: sandbox: Enable NVMXIP QSPI driver
Enable NVMXIP QSPI driver on sandbox, since it is already enabled
on sandbox64.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-08-30 17:56:21 -04:00
Tom Rini
c37be6a39a First set of u-boot-at91 features for the 2023.10 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmTu+QMcHGV1Z2VuLmhy
 aXN0ZXZAY29sbGFib3JhLmNvbQAKCRAesx4CDqwvyFqVB/9z5lV4zhqWYiQ+wNZL
 Gxs3//DSS5iVHU+xaPRrYQT99Yn2/kfM2LeQ4REBOaOTP7IX2ewmOEro4OUViFuC
 kt/WnHD0XzN+2o8akIdVC5YudgVcuX751SQtp5dqcbN6FylSH010+YIZTvaJoNQn
 +Wny1ZZhpuNJJEPvLxE/eiJ3jFwvEAjC+jH328uQIeSLknPh93hGJOFc/02F0O2o
 s96J1/VZ4qvvQKYw0sgNtGb/0Og7V0RLW27+RfwhH4XJvAIv/A6MioTyRaCS2h7H
 tzj/hFXbzGtu+AqrEtMgNjzC7vAx+0266P/Zx/DOWKoWLDIYkWSLpYKLut0E6CUe
 +fcB
 =L/iw
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-2023.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next

First set of u-boot-at91 features for the 2023.10 cycle:

This feature set includes a new board sama5d29 Curiosity, and various
fixes and alignments for sam9x60 and sam9x60 curiosity board.
2023-08-30 09:32:10 -04:00
Sughosh Ganu
0ef2875cf2 sandbox: capsule: Add path to the public key ESL file
Add the path to the public key EFI Signature List(ESL) file for the
sandbox variants which enable capsule authentication. This ESL file
gets embedded into the platform's device-tree as part of the build.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2023-08-29 13:38:56 -04:00
Sughosh Ganu
14a0e7c0fa sandbox: capsule: Enable EFI capsule module on sandbox variants
Enable the EFI capsule update code on all sandbox variants. This was
already enabled on the sandbox, sandbox64 and sandbox_flattree
variants. The rest of the variants also have the EFI capsule update
module  enabled now. With this commit, the mkeficapsule tool also gets
enabled on all variants.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-29 13:37:54 -04:00
Alexander Dahl
e1ee52ca56 configs: at91: sam9x60: Switch to new reset driver
Since commit 61040097a9 ("reset: at91: Add reset driver for basic
assert/deassert operations") the compatible "microchip,sam9x60-rstc" for
the sam9x60 reset controller in sam9x60.dtsi is not handled by
CONFIG_SYSRESET_AT91 anymore, but by CONFIG_RESET_AT91 now.  This
resulted in the following error message, when trying to reset from
U-Boot shell:

    U-Boot> reset
    resetting ...
    System reset not supported on this platform
    ### ERROR ### Please RESET the board ###

Fixed by enabling the new driver in the relevant defconfigs.  Tested on
sam9x60-curiosity board.  Defconfigs for sam9x60ek adapted in the same
way, but without testing.  These should be all sam9x60 boards affected
in U-Boot here.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Alexander Dahl
deacc65152 configs: at91: sam9x60_curiosity: Sync both defconfig variants
The board has two SD card slots and we have two defconfigs for booting
from either the first (micro SD) named 'sam9x60_curiosity_mmc_defconfig'
or the second (full size SD) named 'sam9x60_curiosity_mmc1_defconfig'.
For comparable Microchip boards (sama5d27-som1-ek, sama5d29-curiosity,
sama7g5ek) with two card slots the defconfigs only differ in BOOTARGS,
BOOTCOMMAND, and ENV_FAT_DEVICE_AND_PART and the same should be the case
for sam9x60_curiosity.

Here the 'mmc1' config has more options enabled to support the raw NAND
flash populated on the board, so the 'mmc' config (for mmc0) was adapted
by enabling additional options, instead of removing options from mmc1.

The 'mem=128M' argument can be dropped from kernel command line, because
it is redundant to memory node in dts in both Linux and U-Boot:

        memory@20000000 {
                reg = <0x20000000 0x8000000>;
        };

Signed-off-by: Alexander Dahl <ada@thorsis.com>
2023-08-29 17:39:01 +03:00
Daniel Golle
dcde1f95bf configs: set CONFIG_LMB_MAX_REGIONS=64 for MT7988 boards
Similar to MT7981 and MT7986 also MT7988 can have a high number of
reserved-memory regions used by the various hardware offloading
subsystems.

Raise CONFIG_LMB_MAX_REGIONS to 64 to avoid errors when trying to boot
Linux with more then 6 reserved regions:

ERROR: reserving fdt memory region failed (addr=4f700000 size=240000 flags=4)
ERROR: reserving fdt memory region failed (addr=15194000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15294000 size=1000 flags=4)
ERROR: reserving fdt memory region failed (addr=15394000 size=1000 flags=4)
ERROR: Failed to allocate 0xb161 bytes below 0x80000000.
device tree - allocation error

Fixes: bc4adc97cf ("board: mediatek: add MT7988 reference boards")
Reported-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-08-28 15:59:22 -04:00
Andrew Davis
b982a850d0 configs: Enable CONFIG_DM_SCSI in am57xx_hs_evm_usb
This should have already been enabled but was missed when converting the
base platform defconfig, fix this here.

Fixes: 3c5aa6cacc ("configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-28 15:59:22 -04:00
Simon Glass
d08db02d2d bootstd: Add a test for bootmeth_cros
The ChromiumOS bootmeth has no tests at present. Before adding more
features. add a basic test.

This creates a disk which can be scanned by the bootmeth, so make sure
things work. It is quite rudimentary, since the kernel is faked, the root
disk is missing and there is no cmdline stored.

Enable the bootmeth for snow so it can build the unit test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-25 17:55:19 -04:00
Alper Nebi Yasak
05e2fa7931 arm: qemu: Enable usb keyboard as an input device
Commit 02be57caf7 ("riscv: qemu: Enable usb keyboard as an input
device") adds PCI xHCI support to QEMU RISC-V virtual machines and
enables using a USB keyboard as one of the input devices. Similarly,
enable those for ARM virtual machines as well.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
2023-08-24 16:47:25 -04:00
Tom Rini
7e6e40c572 Prepare v2023.10-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmTjxwsACgkQFHw5/5Y0
 tyz4TAwAtVgllQGPVNIVDaEBdG93htm1DoZPc4EMZ4L5rf0nT0yJPeOhRCGygYY+
 zYL1ueleBZtpJhYOuHGetSns0B/M5Wx7gu1eGHNGrMNHH7zCV5Ynjjee2IaqKgbU
 tdSSc8XQpJ3PJY6rhJ6qZ7pO/EcUlQEdqplEUGFmA4JObx43j1+bmqyGTJA57vEw
 rrr+tyUVlr+Wv4lqlX/YJWzAB6IoSMUStv34M2lmiZvZoTYHezvIqBK33GrQ4Cwl
 hQ8nP7ymBXdA5GoMFBpfaBCA7aX3esx4yYN3JIRNRjNmnITJHYs0G8oIh8R5iNnJ
 psroU7GRPu3MmXfOnHlRfA/v0mo8xQGc2RQHyZUGXuApTI8+SFK/4WJPBny/IYse
 ggcVCHoI57dx1+j4+JHYhh61bMR1JUwARs4/UU4dKT3MRZM8Gb99OvbXO3+switZ
 R0YHSnDP///MTC7/MzbOPWzsJiTn9gkZd8nFVTXoncrVI8F3OtCc89G4HBruBSj7
 ptfylxqH
 =VlzD
 -----END PGP SIGNATURE-----

Merge tag 'v2023.10-rc3' into next

Prepare v2023.10-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-21 17:32:17 -04:00
Marek Vasut
ddfda552e7 configs: sandbox64: Enable PCI register multi-entry support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
PCI register multi-entry support. This fixes ut_dm_dm_test_pci_bus_to_phys
test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
eaa5b5d7d2 configs: sandbox64: Enable clock CCF driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
CCF and Sandbox CCF drivers. This fixes ut_dm_dm_test_clk_ccf test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
5d5d7e225d configs: sandbox64: Enable video 12x22 font support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
12x22 font support. This fixes ut_dm_dm_test_video_text_12x22 test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
539485fd9e configs: sandbox64: Enable video 16bpp and 24bpp support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
16bpp and 24bpp video support. This fixes ut_dm_dm_test_video_bmp16
and ut_dm_dm_test_video_bmp24 tests .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
d54c44b474 configs: sandbox64: Enable PINCTRL_SINGLE driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
PINCTRL single driver. This fixes ut_dm_dm_test_pinctrl_single test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
09c0b2e712 configs: sandbox64: Enable BUTTON_ADC driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
BUTTON ADC driver. This fixes ut_dm_dm_test_button_keys_adc test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
226ddc0dcc configs: sandbox64: Enable MC34708 driver
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
MC34708 PMIC driver. This fixes ut_dm_dm_test_power_pmic_mc34708_get test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
49147a0b0d configs: sandbox64: Increase console record size to 0x6000
Align the sandbox64 defconfig with sandbox defconfig. Increase the
console record size. This fixes ut_bootstd_bootflow_cmd_scan_e .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:27 -06:00
Marek Vasut
ff547a6bc2 configs: sandbox64: Enable SF bootdev
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
SPI NOT bootdev. This fixes ut_bootstd_bootdev_test_cmd_hunt test .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-20 15:55:26 -06:00
Jonas Karlman
e34efcf51d rockchip: rk3566-anbernic-rgxx3: Rename defconfig to include SoC name
Rename defconfig to include SoC name, use similar pattern as other
RK356x boards: <soc>-<name>.dts -> <name>-<soc>_defconfig

Suggested-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-18 10:25:03 -04:00
Tom Rini
2d8e7ac320 ARM: tegra: Changes for v2023.10-rc1
This adds support for various new Tegra30 boards (ASUS, LG and HTC) and
 has some other minor enhancements, such as enabling the poweroff command
 on several Tegra210 and Tegra186 boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmTfWrITHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYPFD/9hw40HjaAXf6cD960HWSlcGuNOIV99
 A9JoSgHipCuhACr0z7s4MpbATjEgknZUblJNiVdhzCWAgW3Spy9JpSxMyKlpqdiH
 7Z971DuaXFX9ZCilX9g6whZI/RDglpUEjt3cb4PWrznM6dpKA73voizo+czBeXd7
 AhxTN/2I89VLz75RyR+X41bLLK1VuGND+uGHz/DDbpMXEW8gVRtZ8gnJPeR4zg1y
 EUacNFc+PVjghMFZGmClnw0pXkq2akKp5cJ/A+11aa/Q7FII63v5/Np79kDtnUje
 GPSdg4yqSr1ZE/6qK0qV58B2KKHfeg+6GC47s46KjzaUwL4De64zHtCt6t37zz8y
 hngeeR5SYIKR8HkpXKM8DsMv0D1WciP2awggFPaPF802H/5GMVCnEFITmuFlOuAe
 Q1lg2acywMo2NFINMOONuQahGIJZORpm2VMonMhlesyAuc89quslt/iYSAoV9E4/
 Pt1AqgeOpUh5I236EygJJ11V2BAXkwzR6RazFDr3AHCqB9iFW/UNS1Y7A1pXwKYN
 IVUWU8xkuYYSyxeGwuIrTj/JdQhwfO0jn+xn5g+rUPWNP5n4FJ2oBVPOInfEpled
 k0HgxcGK6Z0hBCwd6/t03QQJWD47/r5jAd9x1eLRFWYV8ivl2Acvm+MlkPx81weG
 E1h7UKdfvTZcDw==
 =Bzgn
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-tegra

ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and
has some other minor enhancements, such as enabling the poweroff command
on several Tegra210 and Tegra186 boards.
2023-08-18 10:05:04 -04:00
Patrick Delaunay
284b08fb51 board: stm32mp1: add splash screen with stmicroelectronics logo
Display the STMicroelectronics logo with features VIDEO_LOGO and
SPLASH_SCREEN on STMicroelectronics boards.

With CONFIG_SYS_VENDOR = "st", the logo st.bmp is selected, loaded at the
address indicated by splashimage and centered with "splashpos=m,m".

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-08-16 15:35:55 +02:00
Siddharth Vadapalli
9a07d2df76 configs: j7200_evm_a72: Enable configs for SGMII support with MAIN CPSW0
The MAIN CPSW0 instance of CPSW Ethernet Switch on TI's J7200 SoC
supports SGMII mode. To enable support for utilizing the SGMII
daughtercard with TI's DP83869 PHY, enable the corresponding config.

Also, since the SGMII daughtercard is connected to the I2C GPIO
Expander 2 connector on the J7200 EVM, powering on the Ethernet PHY and
resetting it requires GPIO Hogging capability. Enable it as well.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2023-08-15 17:46:39 -04:00
Heinrich Schuchardt
cf159fe0b6 configs: enable SEMIHOSTING on qemu_arm64_defconfig
We need a platform on which we can test our semihosting code.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2023-08-14 17:55:53 -04:00
Sergei Antonov
852467de92 pci: ftpci100: add new driver implementation
Add a new DM driver supporting FTPCI100 IP used in SoC designs.
This implementation is not based on the old non-DM ftpci100 code
dropped from U-Boot.

Enable the driver in sandbox_defconfig to test compilability.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
2023-08-14 17:55:53 -04:00
Mark Kettenis
b99c635787 phy: Add support for the Apple Type-C PHY
This is merely a dummy driver that makes sure the DWC3 XHCI driver
finds its reset and PHY controllers.  We rely on iBoot to set up
the PHY for us.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-08-14 17:51:51 -04:00
Andy Yan
bb38db086c rockchip: rk3568: Add EmbedFire Lubancat 2 support
LubanCat2 is a rk3568 based SBC from EmbedFire.

Specification:
- Rockchip rk3568
- LPDDR4/4X 1/2/4/8 GB
- TF scard slot
- eMMC 8/32/64/128 GB
- Gigabit ethernet x 2
- HDMI out
- USB 2.0 Host x 1
- USB 2.0 Type-C OTG x 1
- USB 3.0 Host x 1
- Mini PCIE interface for WIFI/BT module
- M.2 key for 2280 NVME
- 40 pin header

The dts file is sync from linux mainline.

Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12 10:17:59 +08:00
Peter Robinson
080030f276 rockchip: dts: rk3328: Add rng details to u-boot.dtsi
Add the rk3328 rng details to the u-boot.dtsi and
enable the RNG on the Rock64 to be able to provide
a random seed via UEFI.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
(Fix typo message)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12 10:13:14 +08:00
Peter Robinson
a13a7a0b45 config: rock64: enable efuse for stable mac addr
Enable the rockchip efuse driver on the Rock64 to
provide a stable ethernet address on the device.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-12 10:13:06 +08:00
Shengyu Qu
7d79bed00c configs: starfive: Enable environment in SPI flash support
On Starfive Visionfive 2, the u-boot environment settings are saved to
on-board SPI flash. Enable relative configs by default and set offset
and size according to upstream linux dts.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-10 10:58:07 +08:00
Minda Chen
0665621386 configs: riscv: starfive: Add VF2 PCIe USB3 XHCI support
Add XHCI_PCI to enable usb3-host functions.
Also add usb command and keyboard config.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-10 10:58:01 +08:00
Simon Glass
cfa5934979 x86: Enable useful options for qemu-86
This build can be used to boot 32-bit standard-distro builds. Enable some
more options, so that all possible EFI UUIDs are decoded, we can search
memory for tables, support the full set of standard-boot features, have
full logging along with debug UART and can boot from CDROM media.

This mirrors a similar patch for qemu-x86_64

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Drop the unknown option from defconfig]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09 23:31:12 +08:00
Simon Glass
1fa64e155d Revert "x86: Switch QEMU over to use the bochs driver"
Unfortunately the bochs driver does not currently work with distros.
It causes a hang between grub menu selection and the OS displaying
something.

Preliminary investigation shows that GRUB does not jump to the kernel
at all.

This reproduces reliably.

This reverts commit b8956425d5.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com> # qemu-x86_64
[Slightly modify the commit message about preliminary investigation]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09 23:31:11 +08:00
Tom Rini
a077ac13d0 Kconfigs: Correct default of "0" on hex type entries
It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0".  However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-09 09:21:42 -04:00
Abdellatif El Khlifi
13f3470adc arm_ffa: efi: corstone1000: enable MM communication
turn on EFI MM communication

On Corstone-1000 platform MM communication between u-boot
and the secure world (Optee) is done using the FF-A bus.

Changes made are generated using savedefconfig.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
2023-08-08 10:23:32 -04:00
Abdellatif El Khlifi
a09852d862 arm_ffa: introduce sandbox FF-A support
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support

Features of the sandbox FF-A support:

- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs

The sandbox FF-A emulator supports only 64-bit direct messaging.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-08-08 10:22:03 -04:00
Tom Rini
df8967435a configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-07 15:17:12 -04:00
Mihai Sain
87d1cac49d board: at91: sama5d29_curiosity: add initial support for sama5d29_curiosity
Add initial support for sama5d29_curiosity board.

Hardware:
SoC: SAMA5D29 500 MHz
DRAM: LPDDR2 512 MiB
PMIC: MCP16502
Debug: UART0
Flash: QSPI NOR 8 MiB
RGB LCD connector
Mikrobus connectors x 2
SD-Card connectors x 2
USB 2.0 x 2

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2023-08-07 11:42:16 +03:00
Marcel Ziswiler
7d1a10659f board: toradex: add verdin am62 support
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT
V1.0A module and subsequent V1.1 launch configuration SKUs. They are
strapped to boot from their on-module eMMC. U-Boot supports booting
from the on-module eMMC only, DFU support is disabled for now due to
missing AM62x USB support.

The device trees were taken straight from Linux v6.5-rc1.

Boot sequence is:
SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE
  ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img)

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-04 15:03:42 -04:00
Mathew McBride
02a85922bf board: traverse: ten64: adopt standard boot defaults
With the previous updates to the device tree, Ten64
can use Standard Boot 'out of the box'.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
6af6677f01 board: ten64: disable watchdog autostart
The watchdog driver was previously enabled but not used
until U-Boot's fsl-ls1088a.dtsi was updated to describe them.

Some Linux distributions (e.g Debian 11) do not engage the
SP805 watchdogs, causing unexpected resets after boot.

To conserve the user experience, turn off the autostart,
and we will provide a mechanism to turn them on at boot
via env vars.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Mathew McBride
3c052f9b22 configs: ten64: enable NVME_PCI
This restores NVMe functionality after PCI(e) NVMe support
was split out from the NVMe driver.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-03 09:40:50 -04:00
Weijie Gao
bc4adc97cf board: mediatek: add MT7988 reference boards
This patch adds general board files based on MT7988 SoCs.

MT7988 uses one mmc controller for booting from both SD and eMMC,
and the pins of mmc controller booting from SD are also shared with
one of spi controllers.
So two configs are need for these boot types:

1. mt7988_rfb_defconfig - SPI-NOR, SPI-NAND and eMMC
2. mt7988_sd_rfb_defconfig - SPI-NAND and SD

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2023-08-03 09:40:50 -04:00
Heinrich Schuchardt
cd24d0722a riscv: sifive: initialize PCI on Unmatched
The Unmatched board is typically booted from NVMe which requires PCI.
When dropping to a console PCI is not initialized yet. 'pci enum' has to be
called.

Change the configuration to call  pci_init() in board_init_r().

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2023-08-02 11:02:33 +08:00
Minda Chen
493c03f820 configs: starfive-jh7110: Add CONFIG_RTL8169
Add PCIe device rtl8169 net adapter driver support.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-02 11:02:32 +08:00
Mason Huo
cb2750e10b configs: starfive-jh7110: Add support for PCIe host driver
Add PCIe host driver and nvme driver in configure file.

Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-08-02 11:02:32 +08:00
Tom Rini
aaeaef2536 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- i2c-gpio: Correctly handle new {sda, scl}-gpios bindings (Chris)
- mvebu: x240: Use i2c-gpio instead of built in controller (Chris)
2023-08-01 10:17:23 -04:00
Jonas Karlman
1f54f71b18 board: rockchip: Add Radxa E25 Carrier Board
Radxa E25 is a network application carrier board for the Radxa CM3I SoM
with a RK3568 SoC. It features dual 2.5G ethernet, mini PCIe, M.2 B Key,
USB3, eMMC, SD, nano SIM card slot and a 26-pin GPIO header.

Features tested on a Radxa E25 v1.4:
- SD-card boot
- eMMC boot
- USB host
- PCIe/Ethernet adapters is detected
- SATA

Device tree is imported from linux next-20230728.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
2023-07-31 20:34:32 +08:00
Jagan Teki
b6fd3c63f4 configs: rockchip: Enable USB2PHY for RK3328 boards
Enable USB2PHY for all RK3328 boards.

=> usb start
starting USB...
Bus usb@ff5c0000: USB EHCI 1.00
Bus usb@ff5d0000: USB OHCI 1.0
Bus usb@ff600000: generic_phy_get_bulk : no phys property
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@ff580000: USB DWC2
scanning bus usb@ff5c0000 for devices... 2 USB Device(s) found
scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found
scanning bus usb@ff600000 for devices... 2 USB Device(s) found
scanning bus usb@ff580000 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 2 Storage Device(s) found
=> usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
  |  u-boot EHCI Host Controller
  |
  +-2  Mass Storage (480 Mb/s, 500mA)
       TS-RDF5A Transcend 000000000009

  1  Hub (12 Mb/s, 0mA)
      U-Boot Root Hub

  1  Hub (5 Gb/s, 0mA)
  |  U-Boot XHCI Host Controller
  |
  +-2  Mass Storage (5 Gb/s, 224mA)
       SanDisk Dual Drive 040130e3ee554b7078843f4eb331646

  1  Hub (480 Mb/s, 0mA)
  |   U-Boot Root Hub
  |
  +-2  Human Interface (12 Mb/s, 98mA)
       Logitech USB Receiver

=> dm tree -s
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 syscon        1  [ + ]   syscon                |-- syscon@ff450000
 phy           0  [ + ]   rockchip_usb2phy      |   `-- usb2phy@100
 clk           2  [ + ]   rockchip_usb2phy_clo  |       |-- usb480m_phy
 phy           1  [ + ]   rockchip_usb2phy_por  |       |-- otg-port
 phy           2  [ + ]   rockchip_usb2phy_por  |       `-- host-port
 sysinfo       0  [ + ]   sysinfo_smbios        |-- smbios
 usb           3  [ + ]   dwc2_usb              |-- usb@ff580000
 usb_hub       3  [ + ]   usb_hub               |   `-- usb_hub
 usb_dev_ge    0  [ + ]   usb_dev_generic_drv   |       `-- generic_bus_3_dev_2
 usb           0  [ + ]   ehci_generic          |-- usb@ff5c0000
 usb_hub       0  [ + ]   usb_hub               |   `-- usb_hub
 usb_mass_s    0  [ + ]   usb_mass_storage      |       `-- usb_mass_storage
 blk           2  [ + ]   usb_storage_blk       |           |-- usb_mass_storage.lun0
 partition     4  [ + ]   blk_partition         |           |   |-- usb_mass_storage.lun0:1
 partition     5  [ + ]   blk_partition         |           |   `-- usb_mass_storage.lun0:2
 bootdev       3  [   ]   usb_bootdev           |           `-- usb_mass_storage.lun0.bootdev
 usb           1  [ + ]   ohci_generic          `-- usb@ff5d0000
 usb_hub       1  [ + ]   usb_hub                   `-- usb_hub

Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
Jagan Teki
5d334b70cc configs: Enable DWC3 USB 3.0 on RK3328 boards
Enable USB 3.0 in all RK3328 boards.

=> usb start
starting USB...
Bus usb@ff5c0000: ehci_generic usb@ff5c0000: Failed to get clocks (ret=-19)
Port not available.
Bus usb@ff5d0000: USB OHCI 1.0
Bus usb@ff600000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@ff580000: 1 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:
  1  Hub (12 Mb/s, 0mA)
      U-Boot Root Hub

  1  Hub (5 Gb/s, 0mA)
  |  U-Boot XHCI Host Controller
  |
  +-2  Mass Storage (5 Gb/s, 224mA)
       SanDisk Dual Drive 040130e3ee554b7078843f4eb331646

  1  Hub (480 Mb/s, 0mA)
      U-Boot Root Hub

Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
Jagan Teki
559911ff2e configs: Drop unused XHCI_DWC3 for RK3328 boards
Driver support for rk3328 is not supported so drop this
unused XHCI_DWC3.

Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 20:33:18 +08:00
Chris Packham
5c1c6b7306 arm: mvebu: x240: Use i2c-gpio instead of built in controller
There is an Errata with the built-in I2C controller where various I2C
hardware errors cause a complete lockup of the CPU (which eventually
results in an watchdog reset).

Put the I2C MPP pins into GPIO mode and use the i2c-gpio driver instead.
This uses a bit-banged implementation of an I2C controller and avoids
triggering the Errata.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-07-31 13:50:57 +02:00
Eugen Hristev
b8fc65473a board: rockchip: add Radxa ROCK5A Rk3588 board
ROCK 5A is a Rockchip RK3588S based SBC (Single Board Computer) by Radxa.

There are tree variants depending on the DRAM size : 4G, 8G and 16G.

Specifications:

     Rockchip Rk3588S SoC
     4x ARM Cortex-A76, 4x ARM Cortex-A55
     4/8/16GB memory LPDDR4x
     Mali G610MC4 GPU
     MIPI CSI 2 multiple lanes connector
     4-lane MIPI DSI connector
     Audio – 3.5mm earphone jack
     eMMC module connector
     uSD slot (up to 128GB)
     2x USB 2.0, 2x USB 3.0
     2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60
     Gigabit Ethernet RJ45 with optional PoE support
     40-pin IO header including UART, SPI, I2C and 5V DC power in
     USB PD over USB Type-C
     Size: 85mm x 56mm (Raspberry Pi 4 form factor)

Kernel commits:
d1824cf95799 ("arm64: dts: rockchip: Add rock-5a board")
991f136c9f8d ("arm64: dts: rockchip: Update sdhci alias for rock-5a")
304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a")
cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a")

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
747f9f2663 rockchip: rk3588-rock-5b: Fix SPI Flash alias
The commit fd6e425be2 ("rockchip: rk3588-rock-5b: Enable boot from SPI
NOR flash") enabled SPI flash support by adding a spi0 alias.

Correct this by adding spi0-spi5 aliases in rk3588s-u-boot.dtsi and
SF_DEFAULT_BUS=5 and SPL_DM_SEQ_ALIAS=y in defconfig. Also enabled
support for parsing and auto discovery of parameters, SFDP.

Fixes: fd6e425be2 ("rockchip: rk3588-rock-5b: Enable boot from SPI NOR flash")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
52f6b96d27 rockchip: rk3568-rock-3a: Fix SPI Flash alias
The commit 64f79f88a7 ("rockchip: rk3568-rock-3a: Enable boot from SPI
NOR flash") enabled SPI flash support by overriding the spi0 alias.

Correct this by adding a new spi4 alias in rk356x-u-boot.dtsi and
SF_DEFAULT_BUS=4 and SPL_DM_SEQ_ALIAS=y in defconfig. Also enabled
support for parsing and auto discovery of parameters, SFDP.

Fixes: 64f79f88a7 ("rockchip: rk3568-rock-3a: Enable boot from SPI NOR flash")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
ee75f16868 rockchip: rk3399-roc-pc: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
263f81d3a5 rockchip: rk3399-pinephone-pro: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
cc11d5c4ba rockchip: rk3399-pinebook-pro: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also add CONFIG_ROCKCHIP_SPI_IMAGE=y to build a bootable SPI flash
image, u-boot-rockchip-spi.bin.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
ada6328738 rockchip: rk3399-rockpro64: Fix SPL max size and SPI flash payload offset
TPL max size is limited to 184 KB, SPL is loaded to 0x0 and TF-A is
loaded to 0x40000, this limit SPL max size to 256 KB. With BootRom only
reading first 2 KB per 4 KB page of SPI flash, 880 KB may be needed for
TPL+SPL in a worst-case scenario. (184 KB + 256 KB) x 2 = 880 KB

Use 0xE0000 (896 KB) as the payload offset in SPI flash, this allows
for a payload of 3168 KB before env offset start to overlap.

Also remove CONFIG_LTO=y now that there is sufficient space for SPL in
SPI flash, and to fix a build issue reported by Peter Robinson.

Fixes: 5713135ecc ("rockchip: rockpro64: Build u-boot-rockchip-spi.bin")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 17:34:43 +08:00
Jonas Karlman
6855fa625c board: rockchip: Add Pine64 SOQuartz on CM4-IO
The Pine64 SOQuartz compute module is mostly pin-compatible with the RPi
CM4 form factor. Therefore, it can slot into the official Raspberry Pi
CM4 IO carrier board. Add this configuration to U-Boot.

Features tested with a SOQuartz 4GB v1.1 2022-07-11:
- SD-card boot
- eMMC boot
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:36 +08:00
Jonas Karlman
d0026e5908 board: rockchip: Add Pine64 SOQuartz on Blade
The Pine64 SOQuartz Blade board is a carrier board for the SOQuartz
CM4-compatible compute module. It features PoE, an M.2 slot, an SD card
slot, HDMI, USB, serial and ethernet.

Features tested with a SOQuartz 4GB v1.1 2022-07-11:
- SD-card boot
- eMMC boot
- PCIe/NVMe
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
651492bfb2 board: rockchip: Add Pine64 SOQuartz on Model A
The Pine64 SOQuartz Model A board is a carrier board for the SOQuartz
CM4-compatible compute module. It exposes PCIe, ethernet, USB, HDMI,
CSI, DSI, eDP and a 40 pin GPIO header, and is powered by 12V DC.

Features tested with a SOQuartz 4GB v1.1 2022-07-11:
- SD-card boot
- eMMC boot
- PCIe/NVMe/AHCI
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
f52452bbea board: rockchip: Add Pine64 Quartz64-B Board
The Pine64 Quartz64 Model B is a credit-card sized single-board
computer based on the Rockchip RK3566 SoC. The board features an M.2
PCIe slot, USB3, USB2, eMMC, SD, ethernet, HDMI, analog audio out, a
40 pin GPIO header and a DSI and CSI port, as well as on-board Wi-Fi.

Features tested on a Quartz64-B 4GB v1.4 2022-06-06:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
9c1b5d163e board: rockchip: Add Pine64 Quartz64-A Board
The Pine64 Quartz64 Model A is a single-board computer based on the
Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0,
CSI, DSI, eDP, eMMC, SD, and an e-paper parallel port, as well as a
20 pin GPIO header.

Features tested on a Quartz64-A 8GB v2.0 2021-04-27:
- SD-card boot
- eMMC boot
- PCIe/NVMe/AHCI
- USB host

Device tree is imported from linux v6.4.

Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:41:35 +08:00
Jonas Karlman
f8a2d1c108 rockchip: rk3568: Use dwc3-generic driver
Change RK3568 devices to use the newer dwc3-generic driver instead of
the old xhci-dwc3 driver for USB 3.0 support.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:38 +08:00
Alper Nebi Yasak
42cb8f0112 rockchip: chromebook_speedy: Enable sound
Commit ec107f04b6 ("rockchip: chromebook_minnie: Enable sound") and
commit 2d0c01b8f0 ("sound: rockchip: Add sound support for jerry")
enable audio support for chromebook_minnie and chromebook_jerry. Enable
it for chromebook_speedy as well, but put the non-upstream sound node
in the board -u-boot.dtsi instead.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
5c6e387e46 rockchip: chromebook_jerry: Re-enable MAX98090 codec driver
Sound support for chromebook_jerry needs the MAX98090 codec driver. This
was enabled in commit 2d0c01b8f0 ("sound: rockchip: Add sound support
for jerry"), but apparently lost in commit 7ae2729401 ("configs:
Resync with savedefconfig"). Enable it again.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>   # chromebook_jerry
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
7bd46bf4c6 rockchip: veyron: Use TrueType fonts
Commit 815ed79d83 ("video: rockchip: Use TrueType fonts with jerry")
enables makes chromebook_jerry use TrueType fonts. Make other veyron
boards switch to it as well.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
d25b34751b rockchip: veyron: Add serial, logging, silent console support
Commit eba768c545 ("rockchip: jerry: Add serial support") enables
ROCKCHIP_SERIAL for chromebook_jerry to make the serial console work
correctly. Enable it also for other veyron boards.

Also enable logging and disable scrolling multiple lines at once as in
chromebook_jerry, and enable silent console as chromebook_minnie does.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Alper Nebi Yasak
cbe7322d17 rockchip: veyron: Enable RESET driver
Commit 70e351bdfe ("rockchip: jerry: Enable RESET driver") enables
DM_RESET for chromebook_jerry to fix its display as required by changes
to the Rockchip video drivers. Enable it for other veyron boards as
well.

Fixes: cd529f7ad6 ("rockchip: video: edp: Add missing reset support")
Fixes: 9749d2ea29 ("rockchip: video: vop: Add reset support")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>   # chromebook_jerry
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:40:13 +08:00
Pegorer Massimo
6d79d8a743 configs: rockchip: drop useless DEBUG_UART_SKIP_INIT
DEBUG_UART_SKIP_INIT feature is implemented only by s5p (DEBUG_UART_S5P)
and pl01x (DEBUG_UART_PL010 or DEBUG_UART_PL011) serial drivers, but all
ARCH_ROCKCHIP configs rely on default DEBUG_UART_NS16550. The ns16550
serial driver does not depends on DEBUG_UART_SKIP_INIT, so drop it from
rockchip configs.

Signed-off-by: Massimo Pegorer <massimo.pegorer@vimar.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:39:01 +08:00
Pegorer Massimo
9f2c7349e5 rockchip: rk3308: no DEBUG_UART_BOARD_INIT for ROCK Pi S
Call to board_debug_uart_init() is useless, as mainline U-Boot can
not build TPL for rk3308, and proprietary ddr.bin to be used as TPL
is responsible to init debug uart. Moreover current implementation
of board_debug_uart_init() is not compatible with ROCK Pi S, as it
sets pins for UART2 channel 1 breaking access to sdmmc due to pinmux
conflict. Debug uart for ROCK Pi S is UART0.

Thus, avoid ROCKCHIP_RK3308 to select DEBUG_UART_BOARD_INIT and allow
to deselct it in rock-pi-s-rk3308_defconfig. The DEBUG_UART_BOARD_INIT
is already implied by ARCH_ROCKCHIP, therefore other boards based on
rk3308 chip are not affected by change.

Signed-off-by: Massimo Pegorer <massimo.pegorer@vimar.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31 14:38:51 +08:00
Tom Rini
6544943819 Merge branch '2023-07-27-TI-K2-K3-updates'
- Resync some of the K3 DTS files with the kernel, and pull in some
  required related updates to keep drivers in sync with the dts files
  now.  Bring in some incremental fixes on top of one of the series I
  applied recently as well as updating the iot2050 platform.  Also do a
  few small updates to the K2 platforms.
2023-07-28 10:25:50 -04:00
Andrew Davis
b7e3e6344f configs: keystone2: Unwind KERNEL_MTD_PARTS definition
This is more complex than it needs to be and makes converting these
boards over to plain text env files more difficult. Remove setting
mtdparts as the DTS already contain the partitions. While here also
drop the conflicting definitions from the K2 defconfigs.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-07-28 10:11:01 -04:00
Manorit Chawdhry
1e587054d4 configs: am62x: add SPL_MAX_SIZE back
This was regressed by the following commit and is required to build with
additional configs enabled.

Fixes: 14439cd71c ("configs: k3: make consistent bootcmd across all k3 socs")

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Tested-by: Nikhil M Jain <n-jain1@ti.com>
2023-07-28 10:11:01 -04:00
Jan Kiszka
784f7382de configs: iot2050: Enabled keyed autoboot
Only accept SPACE to stop autobooting. This is safer to avoid accidental
interruptions on unattended devices.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28 10:11:01 -04:00
Jan Kiszka
badaa1f6a7 boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again
This avoids having to maintain to defconfigs that are 99% equivalent.
The approach is to use binman to generate two flash images,
flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we
can avoid duplicating the common binman image definitions.

Suggested-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28 10:11:01 -04:00
Jan Kiszka
00e1c4549d boards: siemens: iot2050: Fix boot configuration
The common env bits now come via ti_armv7_common.env, include it.
Furthermore restore the board-specific boot targets and their ordering
that is now enforced k3-wide differently. Finally, enable
CONFIG_LEGACY_IMAGE_FORMAT explicitly which got lost while turning
FIT_SIGNATURE on by default for k3 devices.

Fixes: 53873974 ("include: armv7: Enable distroboot across all configs")
Fixes: 4ae1a247 ("env: Make common bootcmd across all k3 devices")
Fixes: 86fab110 ("Kconfig: Enable FIT_SIGNATURE if ARM64")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-07-28 10:11:00 -04:00
Jonas Karlman
94da929b93 board: rockchip: Add Hardkernel ODROID-M1
Hardkernel ODROID-M1 is a single board computer with a RK3568B2 SoC,
a slightly modified version of the RK3568 SoC.

Features tested on a ODROID-M1 8GB v1.0 2022-06-13:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe/AHCI
- SATA port
- USB host

Device tree is imported from linux v6.4.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Jonas Karlman
a76aa6ffa6 rockchip: rk3568-rock-3a: Enable PCIe and NVMe support
Add missing pinctrl and defconfig options to enable PCIe and NVMe
support on Radxa ROCK 3 Model A.

Use of pcie20m1_pins and pcie30x2m1_pins ensure IO mux selection M1.
The following pcie_reset_h and pcie3x2_reset_h ensure GPIO func is
restored to the perstn pin, a workaround to avoid having to define
a new rockchip,pins.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Alper Nebi Yasak
e5b33200f8 rockchip: veyron: Enable Winbond SPI flash
Some veyron boards seem to have Winbond SPI flash chips instead of
GigaDevice ones. At the very least, coreboot builds for veyron boards
have them enabled [1]. Enable support for them here as well.

[1] https://review.coreboot.org/c/coreboot/+/9719

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Christopher Obbard
0022461ba6 arm: rockchip: Add Radxa ROCK 4SE
Add board-specific devicetree/config for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor
(which has different OPP table than the RK3399) and other minimal hardware
changes.

Kernel tag: next-20230719
Kernel commits:
- 86a0e14a82ea ("arm64: dts: rockchip: Add Radxa ROCK 4SE")

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Alex Bee
fa86c3ee74 configs: evb-rk3229: Increase SPL_STACK_R_MALLOC_SIMPLE_LEN
An OP-TEE FIT image will fail to extract in SPL because the malloc stack
size is currently limited to 0x2000 for evb-rk3229 board.

In SPL we do not have to care about size limitations, since we are no
longer bound to SRAM limits after DRAM initialization has been done in TPL.

Use the default value for CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN in order
successfully unpack the FIT image.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Christopher Obbard
5b269ed404 configs: rockchip: rock5b-rk3588: Enable CONFIG_PCI_INIT_R
Enable CONFIG_PCI_INIT_R for rock5b pci enumeration during boot in order
to autodetect the PCI ethernet NIC during the boot process.

Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Quentin Schulz
9010c43b03 rockchip: puma: pass platform parameter to TF-A
Puma supports upstream TF-A and is configured to output serial on UART0
instead of the default UART2. Since U-Boot is properly configured to
output on UART0, let's pass the DT to TF-A so there is no need for a
custom TF-A to make the latter output to UART0 too.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Quentin Schulz
e6fa0dcc6f rockchip: rk3399: pass platform parameter to TF-A by default for new RK3399 boards
Long are gone the times TF-A couldn't handle the FDT passed by U-Boot.
Specifically, since commit e7b586987c0a ("rockchip: don't crash if we
get an FDT we can't parse") in TF-A, failure to parse the FDT will use
the fallback mechanism. This patch was merged in TF-A v2.4-rc0 from two
years ago.

New boards should likely have this option disabled or explicitly enable
it in their respective defconfig.

Because existing boards might depend on a TF-A version that predates
v2.4, let's just enable this option in all RK3399 defconfigs.
Maintainers of each board can decide for themselves if they would prefer
to disable this option and allow U-Boot to pass the DT to TF-A.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:03 +08:00
Jagan Teki
0a3a5746c3 board: rockchip: Add Edgeble Neural Compute Module 6B
Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module
based on Rockchip RK3588J from Edgeble AI.

Add support for this SoM and IO board.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
6a73211d4b rockchip: rk3568: Add support for FriendlyARM NanoPi R5C
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.

Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125)
- HDMI 2.0
- MIPI DSI/CSI
- USB Type C 5V

The device tree is taken from kernel v6.4-rc1.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
0ef326b5e9 rockchip: rk3568: Add support for FriendlyARM NanoPi R5S
FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device.

Board Specifications
- Rockchip RK3568
- 2 or 4GB LPDDR4X
- 8GB or 16GB eMMC, SD card slot
- GbE LAN (Native)
- 2x 2.5G LAN (PCIe)
- M.2 Connector
- HDMI 2.0, MIPI DSI/CSI
- 2xUSB 3.0 Host
- USB Type C PD, 5V/9V/12V
- GPIO: 12-pin 0.5mm FPC connector

The device tree is taken from kernel v6.4-rc1.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
9bd954ab8a rockchip: rk3328: Add support for Orange Pi R1 Plus LTS
The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
the on-board NIC chip changed from rtl8211e to yt8531c, and RAM type
changed from DDR4 to LPDDR3.

The device tree is taken from kernel v6.4-rc1.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Tianling Shen
69e16c7b1c rockchip: rk3328: Add support for Orange Pi R1 Plus
Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.

This device is similar to the NanoPi R2S, and has a 16MB
SPI NOR (mx25l12805d). The reset button is changed to
directly reset the power supply, another detail is that
both network ports have independent MAC addresses.

The device tree and description are taken from kernel v6.3-rc1.

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
12b715bd4f configs: Update anbernic-rgxx3_defconfig for panel detection
Update the anbernic-rgxx3_defconfig file to support panel autodetection
and automatically updating the compatible string in the devicetree.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
a6bd5bc988 configs: rock5b-rk3588: enable USB 3.0 controller, command, gadget
Enable configuration for USB 3.0 controller, the commands required,
and the gadget drivers.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Chris Morgan
3c057b4c6c rockchip: board: Update Odroid Go2 to Support Additional Revisions
Update the board.c file for the Odroid Go Advance to support the
Black Edition and the Odroid Go Super. The Odroid Go Advance Black
Edition differs from the original model with the addition of 2
extra buttons and an ESP8266 WiFi module. The Odroid Go Super
adds an additional 2 buttons compared to the Black Edition, along
with a larger panel and larger battery.

This change uses the value of ADC0 to determine which of these
3 models it is, and then changes the ${fdtfile} environment variable
to match the proper devicetree name in mainline Linux.

Tested on an Odroid Go Advance (first revision) and an Odroid Go Super.
The correct ${fdtfile} variable was set for each device.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Eugen Hristev
14bb9c27b7 configs: rock5b-rk3588: add rtl8169 driver
Add the rtl8169 driver, which supports the rtl8125b device, which is
connected on the pciE bus on this board.
Enable also CONFIG_SYS_HAS_NONCACHED_MEMORY to have the descriptors stored.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-28 18:45:02 +08:00
Angelo Dureghello
838a6a7201 configs: m68k: add watchdog driver
Add config options for mcf_wdt driver.

Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
---
Changes for v2:
- none
Changes for v3:
- none
2023-07-25 23:21:42 +02:00
Tom Rini
9455dc322c configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-07-25 17:00:57 -04:00
Tom Rini
94e7cb181a Revert "Merge branch '2023-07-24-introduce-FF-A-suppport'"
This reverts commit d927d1a808, reversing
changes made to c07ad9520c.

These changes do not pass CI currently.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-07-24 19:51:05 -04:00
Abdellatif El Khlifi
c7f556c7a8 arm_ffa: efi: corstone1000: enable MM communication
turn on EFI MM communication

On corstone1000 platform MM communication between u-boot
and the secure world (Optee) is done using the FF-A bus.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
2023-07-24 15:30:03 -04:00
Abdellatif El Khlifi
32dd07ff46 arm_ffa: introduce sandbox FF-A support
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support

Features of the sandbox FF-A support:

- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs

The sandbox FF-A emulator supports only 64-bit direct messaging.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2023-07-24 15:30:03 -04:00
Tom Rini
45622f3262 Merge branch '2023-07-22-TI-K3-improvements'
- Actually merge the assorted K3 platform improvements that were
  supposed to be in commit 247aa5a191 ("Merge branch
  '2023-07-21-assorted-TI-platform-updates'")
2023-07-24 13:55:59 -04:00
Tom Rini
7177259893 First set of u-boot-atmel fixes for the 2023.07 cycle
-----BEGIN PGP SIGNATURE-----
 
 iQFQBAABCgA6FiEEqxhEmNJ6d7ZdeFLIHrMeAg6sL8gFAmS+Xv0cHGV1Z2VuLmhy
 aXN0ZXZAY29sbGFib3JhLmNvbQAKCRAesx4CDqwvyMgxB/9BTjFfVaglu5+m/kiw
 XEVSJSwe1H3sc5vFlMUYTSAOSF/mzdZIZHXC6THkCU1yfzu9AZXhp4mfRUiNTwth
 w8bvYXm4ZjSxcGPVxVqfThN8iT/SWLpaUC8j7TosP1VKYwzpGmqLyO+ZLu7IwdH+
 /wyXFuYtVQVxmSC6SMNAD5eNtS4O6pufat5e5EkhR2atZ/rhhAYmb9zv3RFuCuSM
 bxqM+4/FqpENaIdMOPk7EbB3S1C5MsJS2b+s1oIRRLfItlLjpQG4nZnuJGRlL/Bg
 mcqYYgHrAnFbLXVOEe5WxMKR1E2fMbtKSlJGpoYO9rSdQRzxGuyRrDm9M77GH2pJ
 0Q/F
 =DT1v
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-at91-fixes-2023.10-a' of https://source.denx.de/u-boot/custodians/u-boot-at91

First set of u-boot-atmel fixes for the 2023.07 cycle:

This small fixes set includes the LTO configs for the boards that had
the SPL size up to the limit (sama5d2-based), such that more code can be
added.  It also includes a fix for mmc non-removable.
2023-07-24 10:58:25 -04:00
Eugen Hristev
f5b9587449 configs: sama5d2: enable CONFIG_LTO
arm-none-linux-gnueabihf-ld.bfd: u-boot-spl section `__u_boot_list' will not fit in region `.sram'
arm-none-linux-gnueabihf-ld.bfd: region `.sram' overflowed by 100 bytes

SPL is at limit so to stop seeing above error in built, enable
link time optimizations CONFIG_LTO.

Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
2023-07-24 14:19:33 +03:00
Stefan Roese
2ac1f5982e configs: at91: sama5d2_icp_mmc: Enable CONFIG_LTO
Adding just a tiny bit more code for sama5d2_icp_mmc leads to a SRAM
image overflow. Fix this by enabling LTO for this board, so that such
changes still can be made to the common U-Boot code.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Tested-by: Mihai Sain <mihai.sain@microchip.com>
[eugen.hristev@microchip.com: restrict patch just to CONFIG_LTO]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
2023-07-24 14:18:03 +03:00
Chanho Park
43cefb4934 configs: visionfive2: add a trailing space to prompt
Adds a trailing space to SYS_PROMPT to make it easier to distinguish
between commands and the prompt.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-07-24 13:22:02 +08:00
Kamlesh Gurudasani
e5031cc07e configs: am64: Fix booting of fitImage on AM64x
Do not limit the maximum size of the buffer that is used to decompress
the OS image in to, this causes issue while inflating the image, if image
size is greater than the buffer.
Remove CONFIG_SYS_BOOTM_LEN

Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 22:07:46 -04:00
Kamlesh Gurudasani
14439cd71c configs: k3: make consistent bootcmd across all k3 socs
Default to common bootcmd that is set across all k3 devices.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-07-21 22:07:45 -04:00
Andrew Davis
052ad4ad6a configs: Enable setexpr command on TI devices
This is used when building the FIT image configuration string. Enable
it for all FIT using TI platforms.

Signed-off-by: Andrew Davis <afd@ti.com>
[ extend to other k3 boards ]
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 20:35:50 -04:00
Manorit Chawdhry
a5e8678e0a configs: k3: Remove saved environments
Having saved environments usually causes inconsistencies while in
development workflow. The saved environments conflict with the
default ones that U-boot should be updating during development
but that doesn't happen and the saved environments need to be
reset during bootups to test the changes causing extra debugs.

Remove the saved environments as a default. Environments can always
be re-enabled locally if one does like them or needs them for
some production environment. Optionally, Uenv.txt can also be used on
some of the boot media.

Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-07-21 20:35:48 -04:00
Nikhil M Jain
1f7682383f configs: am62x_evm_a53: Add bloblist address
Set bloblist address to 0x80D00000.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
2023-07-21 15:32:12 -04:00
Tom Rini
226ecf8be4 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
For once this adds USB support for two SoCs: the H616 and the F1C100s
series. The rest is support for LPDDR3 DRAM chips on H616 boards.

Gitlab CI passed, and I booted that briefly on an H616 and an F1C200s
board. I don't have an H616 board with LPDDR3 DRAM, but reportedly that
works for Mikhail, and doesn't regress on my DDR3 boards.
2023-07-21 10:01:11 -04:00
Raju Kumar Pothuraju
378f4eef09 xilinx: zynq: Enable fdt apply utility for zynq
Enables the FDT library (libfdt) overlay support for zynq platforms
to be able to use fdt apply command.

Signed-off-by: Raju Kumar Pothuraju <rajukumar.pothuraju@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ab26dd186fb752b3d607e6160ae5baf6661d5de7.1688990179.git.michal.simek@amd.com
2023-07-21 09:00:38 +02:00
Ashok Reddy Soma
37688da586 xilinx: versal-net: Add mini eMMC 5.1 configuration
Add support for Versal NET mini eMMC 5.1 configuration. Add device tree
and defconfig.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230614121351.21521-4-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-21 09:00:38 +02:00
Ashok Reddy Soma
38e0fc06b2 xilinx: versal-net: Add mini ospi configuration
Add support for Versal NET mini Octal SPI flash configuration. This runs
from onchip memory, so it has to be compact. Hence only Octal SPI
related settings are enabled.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230614121351.21521-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-21 09:00:38 +02:00
Ashok Reddy Soma
96683d3436 xilinx: versal-net: Add mini qspi configuration
Add support for Versal NET mini Quad SPI flash configuration. This runs
from onchip memory, so it has to be compact. Hence only Quad SPI
related settings are enabled.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230614121351.21521-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-07-21 09:00:38 +02:00
Mikhail Kalashnikov
5d6f013adc sunxi: H616: add DRAM type selection
Allwinner H616 SoC supports several types of DRAM memory. To further
integrate other types of memory, we need to add this delimitation.

Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-07-21 00:54:13 +01:00
Andre Przywara
6acc5fa581 sunxi: H616: enable USB support for H616 boards
Now that the PHY driver supports the H616 USB PHY, we can enable USB
support for the two H616 boards.
As the OrangePi Zero2 has a USB-C port hard-wired to peripheral mode,
let's enable USB gadget mode for port 0, so people can use fastboot,
ethernet or mass storage functionality.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-07-21 00:28:13 +01:00
Tom Rini
5dcfc99b2b Merge tag 'fsl-qoriq-2023-7-13' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Enable DM_SERIAL for T2080RDB, T4240RDB, T1042D4RDB, T1024RDB
2023-07-19 07:59:34 -04:00
Joshua Watt
95811666ae dm: test: Add test for part_get_info_by_type
Adds a test suite to ensure that part_get_info_by_type works correctly
by creating a hybrid GPT/MBR partition table and reading both.

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
[trini: Add this on the other sandbox configs]
Signedd-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-17 16:19:47 -04:00
Simon Glass
b8956425d5 x86: Switch QEMU over to use the bochs driver
This is more convenient since it does not require a video BIOS. Enable
it for QEMU.

Also drop use of video in SPL for the 64-bit QEMU, since it not needed
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 17:23:15 +08:00
Simon Glass
24e7c3e9fc x86: Enable useful options for qemu-86_64
This build can be used to boot standard distro builds, since these are
mostly 64-bit these days. Enable some more options, so that all possible
EFI UUIDs are decoded, we get a proper printf() in SPL, can search
memory for tables, support the full set of standard-boot features, have
full logging and can boot from CDROM media.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 17:12:26 +08:00
Simon Glass
fa5e203092 x86: Enable display for QEMU 64-bit
Enable the various options needed for display to work on the qemu-x86_64
board. This includes expanding the available malloc() memory in SPL,
since the PCI bus must be enumerated in order to find the video device.

It also includes enabling a bloblist, so that the video parameters can be
passed. This is placed at address 10000 but is not needed after U-Boot
proper reads the information there.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 17:12:26 +08:00
Simon Glass
3693d34895 x86: coral: Adjust various config options
Add ms so it is easier to search for tables in memory.

Expand the command-line and print buffers so that we can deal with the
very long ChromeOS command lines. (typically 700 characters).

Enable BOOTSTD_FULL to get the full set of standard-boot options.

Replace the existing manual script with 'bootflow scan', since it can
find and boot the OS.

Finally, expand the malloc() space so we can read large kernels into a
bootflow.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
3a01d702f7 x86: coreboot: Adjust various config options
Drop IDE and add NVME since this is more common now.

Add ms so it is easier to search for tables in memory.

Expand the command-line and print buffers so that we can deal with the
very long ChromeOS command lines. (typically 700 characters).

Enable BOOTSTD_FULL to get the full set up standard-boot options.

Finally, expand the malloc() space so we can read large kernels into a
bootflow.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
c88d67d021 bootstd: Add a simple bootmeth for ChromiumOS
It is possible to boot x86-based ChromeOS machines by parsing a table and
locating the kernel and command line. Add a bootmeth for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
63b7ccbf9f x86: qemu: Switch to standard boot
Drop use of the distro boot script and use standard boot instead.

Moving to a text-based environment would be desirable also, but requires
additional work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Simon Glass
1e5ff88657 x86: qemu: Create a little more room for U-Boot
We want to enable some of the more interesting bootstd features. Move SPL
up to create some room for the larger U-Boot binary. Also disable
microcode since this is not needed

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-07-17 13:38:35 +08:00
Peter Robinson
10de125707 disable NFS support by default
While NFS is widely used in data centres, and private
networks it's quite a nuanced usecase for device firmware.
A lot of devices already disable it.

Various network protocols should really be opt in, not opt
out, because they add extra size and are potential attack
vectors from a security PoV. In the NFS case it doesn't
really make sense for a lot of devices like tables, SBCs etc.
It's also something we don't really want for SystemReady-IR
due to security concerns.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-07-14 15:21:07 -04:00
Jim Liu
094311192b board: nuvoton: arbel: change uboot load address
use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14 15:21:07 -04:00
Jim Liu
e0a1c81cd8 ARM: config: Enable config to decompress the FIT image
Enable FIT and SHA config to decompress the kernel image

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-07-14 15:21:07 -04:00
Simon Glass
a0874dc4ac expo: Add a configuration editor
Add a new 'cedit' command which allows editing configuration using an
expo. The configuration items appear as menus on the display.

This is extremely basic, only supporting menus and not providing any way
to load or save the configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14 12:54:51 -04:00
Tom Rini
c990ecba4d Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- mvebu: Thecus: Misc enhancement and cleanup (Tony)
- mvebu: Add AC5X Allied Telesis x240 board support incl NAND
  controller enhancements for this SoC (Chris)
2023-07-13 20:38:50 -04:00
Tom Rini
f6da5e9273 u-boot-imx-20230713
-------------------
 
 Merge for 2023.10.
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCZK/m8A8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZuIwCglKZeAdyoF4Y3mFGLQsl5woOCqIkAn2bJdqnA
 cYelsWxQgHWLMNxbNHjG
 =91LJ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230713' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20230713
-------------------

Merge for 2023.10.

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888
2023-07-13 20:38:24 -04:00
Chris Packham
4c97c4b590 arm: mvebu: Add Allied Telesis x240 board
The x240 and SE240 are a series of L2+ switches from Allied Telesis.
There are a number of them in the range but as far as U-Boot is
concerned all the CPU block components are the same so there's only one
board defined.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2023-07-13 15:53:57 +02:00
Adam Ford
0a4e414360 arm64: imx: imx8mp-beacon: Enable LTO
With LTO enabled, SPL shrinks about 10K and U-Boot shrinks
about 30K.

Signed-off-by: Adam Ford <aford173@gmail.com>
2023-07-13 11:58:18 +02:00
Lukasz Majewski
65648b26c6 config: xea: Disable support for FAT file system
On the XEA (imx287) system the FAT file system is not used neither in
SPL nor u-boot proper.

Hence, to save ~6KiB of u-boot.img size - it has been disabled.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-13 11:29:41 +02:00
Lukasz Majewski
5386aefb6d config: xea: Disable support for boot methods EXTLINUX and VBE
The XEA system (imx287 based) is not using support for EXTLINUX and VBE.
As those configuration options have been enabled by default with modern
Kconfig it is safe to explicitly disable them.

After that change the u-boot.img size has been reduced by ~16 KiB.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2023-07-13 11:29:41 +02:00
Fabio Estevam
e713364f36 mx23_olinuxino: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13 11:29:41 +02:00
Fabio Estevam
9a38d889a1 mx23evk: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13 11:29:41 +02:00
Fabio Estevam
68bad63ee0 mx28evk: Convert to CONFIG_DM_SERIAL
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-07-13 11:29:41 +02:00
Andrejs Cainikovs
ce2cf345f7 configs: verdin-imx8mp: enable spl_gpio_hog
Enable CONFIG_SPL_GPIO_HOG option to be able to control GPIO hogs from
SPL.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-07-13 11:29:41 +02:00
Andrejs Cainikovs
5e161626f9 configs: verdin-imx8mm: enable spl_gpio_hog
Enable CONFIG_SPL_GPIO_HOG option to be able to control GPIO hogs from
SPL.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-07-13 11:29:40 +02:00
Hugo Villeneuve
1b4c3e6125 imx8mn-var-som: adjust PHY reset gpios according to hardware configuration
For SOM with the EC configuration, the ethernet PHY is located on the
SOM itself, and connected to the CPU ethernet controller. It has a
reset line controlled via GPIO1_IO9. In this configuration, the PHY
located on the carrier board is not connected to anything and is
therefore not used.

For SOM without EC configuration, the ethernet PHY on the carrier
board is connected to the CPU ethernet controller. It has a reset line
controlled via the GPIO expander PCA9534_IO5.

The hardware configuration (EC) is determined at runtime by
reading from the SOM EEPROM.

To support both hardware configurations (EC and non-EC), adjust/fix
the PHY reset gpios according to the hardware configuration
read at runtime from the SOM EEPROM. This adjustement is done in
U-Boot (OF_BOARD_FIXUP) and kernel (OF_BOARD_SETUP) device trees.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
2023-07-13 11:29:40 +02:00
Luca Ellero
e7ff54d963 imx93_evk: defconfig: add adc support
iMX93 ADC features:
    - 4 channels
    - 12 bit resolution

Signed-off-by: Luca Ellero <l.ellero@asem.it>
2023-07-13 11:29:40 +02:00
Tim Harvey
c8645e7411 configs: imx8m: Prepare imx8m-venice boards for HAB support
In order to enable HAB, FSL_CAAM, ARCH_MISC_INIT and
SPL_CRYPTO should be enabled in Kconfig like other i.MX8M
boards.

This also needs to occur in the SPL so enable CONFIG_SPL_BOARD_INIT and
add a void spl_board_init function which calls arch_misc_init to probe
the CAAM driver.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 11:29:40 +02:00
Teresa Remmet
e064fe4f37 configs: phycore-imx8mm_defconfig: Enable LTO
Enable LTO for binary size reduction.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2023-07-13 11:29:40 +02:00
Teresa Remmet
b70a1686c8 configs: phycore-imx8mp_defconfig: Enable LTO
Enable LTO for binary size reduction.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2023-07-13 11:29:40 +02:00
Camelia Groza
6d249769c5 configs: T1024RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T1024RDB defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:55:01 +08:00
Camelia Groza
e5dd02cb30 configs: T1042D4RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T1042D4RDB defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:54:50 +08:00
Camelia Groza
8cdf82a3e7 configs: T4240RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T4240RDB defconfig.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:54:35 +08:00
Camelia Groza
2a72af59c0 configs: T2080RDB: enable DM_SERIAL
As the serial devices are configured in the device tree, enable
DM_SERIAL in the non-SPL T2080RDB defconfigs.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-07-13 16:54:22 +08:00
Yixun Lan
12d02bba55 configs: th1520_lpi4a_defconfig: Add initial config
Add basic config for Sipeed Lichee PI 4A board which make it capable of
booting into serial console.

Reviewed-by: Wei Fu <wefu@redhat.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2023-07-12 13:21:41 +08:00
Yanhong Wang
99f3a43d1c configs: starfive: Enable ID EEPROM configuration
Enabled ID_EEPROM and I2C configuration for StarFive VisionFive2 board.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-By: Leo Yu-Chi Linag  <ycliang@andestech.com>
2023-07-12 13:21:40 +08:00