Commit graph

1013 commits

Author SHA1 Message Date
Jaehoon Chung
89f69e5173 mmc: sdhci: fix the compiler warning when disable CONFIG_MMC_SDMA
When disabled CONFIG_MMC_SDMA, variable caps didn't use.
This patch fixes the compiler error for -Wunused-but-set-variable

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 20:48:01 +09:00
Xu Ziyuan
720724d098 mmc: dw_mmc: fix data starvation by host timeout under FIFO mode
This patch fixes data starvation by host timeout(HTO) error interrupt
which occurred under FIFO mode transfer on rk3036 board.

The former implement, the actual bytes were transmitted may be less than
should be. The size will still subtract value of len in case of there is
no receive/transmit FIFO data request interrupt.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 14:04:36 +09:00
Xu Ziyuan
2990e07a33 mmc: dw_mmc: transfer proper bytes to FIFO
The former implement, dw_mmc will push and pop the redundant data to
FIFO, we should transfer it according to the real size.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 14:04:31 +09:00
Jaehoon Chung
14bed52d27 mmc: sdhci: remove the unnecessary arguments for sdhci_setup_cfg
Some arguments don't need to pass to sdhci_setup_cfg.
Generic variable can be used in sdhci_setup_cfg, and some arguments are
already included in sdhci_host struct.

It's enough that just pass the board specific things to sdhci_setup_cfg().
After removing the unnecessary arguments, it's more simpler than before.
It doesn't consider "Version" and "Capabilities" anymore in each SoC
driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:31:07 +09:00
Jaehoon Chung
6a879ec8e7 mmc: sdhci: remove the unused argument for sdhci_setup_cfg
buswidth isn't used anywhere in sdhci_setup_cfg.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
e1ea7c44d6 mmc: sdhci: revert "mmc: sdhci: Claer high speed if not supported"
This "commit 429790026021d522d51617217d4b86218cca5750" is wrong.
SDHCI_QUIRK_NO_HISPD_BIT is for skipping to set CTRL_HISPD bit.

For example, Exynos didn't have CTRL_HISPD. But Highspeed mode
is supported.
(This quirks doesn't mean  that driver didn't support the Highseepd mode.)

Note: If driver didn't support the Highspeed Mode, use or add the other
quirks.

After applied this patch, all Exynos SoCs are just running with 25MHz.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 11:21:25 +09:00
Xu Ziyuan
1bd4f92cdb mmc: display mmc list information like mmc_legacy type
It's nicer to see this:

=> mmc list
dwmmc@ff0c0000: 0
dwmmc@ff0f0000: 1 (eMMC)

than this:

=> mmc list
dwmmc@ff0c0000: 0dwmmc@ff0f0000: 1 (eMMC)

With the former, it's much clearer which mmc devices are on.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
915ffa5213 mmc: use the generic error number
Use the generic error number instead of specific error number.
If use the generic error number, it can debug more easier.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
70f862808e mmc: fsl_esdhc: remove the duplicated header file
"mmc.h" is already included. It's duplicated.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
ccd60a8524 mmc: dw_mmc: remove the duplicated header file
<asm-generic/errno.h> is already included in <errno.h>.
It can use <errno.h> instead of <asm-generic/errno.h>

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:21:24 +09:00
Jaehoon Chung
a034ec06ff mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B
Unset the SDHCI_QUIRK_BROKEN_R1B for exynos SoC.
(Tested on Exynos4 Boards.)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2016-08-05 11:21:24 +09:00
Jaehoon Chung
17ea3c8628 mmc: sdhci: set to INT_DATA_END when there are data
There is no data, it doesn't needs to wait for completing data transfer.
(It seems that it can be removed.)
Almost all timeout error is occured from stop command without data.
After applied this patch, I hope that we don't need to increase timeout value anymore.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2016-08-05 11:21:24 +09:00
Masahiro Yamada
bae4a1fdf5 mmc: sdhci: clean up timeout detection
The current timeout detection logic is not very nice; it calls
get_timer(start) in the while() loop, and then calls it again after
the loop to check if a timeout error happened.

Because of the time difference between the two calls of get_timer(),
the timeout detected after the loop may not be true.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 11:21:24 +09:00
Kever Yang
46683f3da1 mmc-uclass: correct the device number
Not like the mmc-legacy which the devnum starts from 1, it starts from 0
in mmc-uclass, so the device number should be (devnum + 1) in get_mmc_num().

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-07-31 07:24:20 -06:00
Xu Ziyuan
02ebd42cf1 mmc: dw_mmc: reduce timeout detection cycle
It's no need to speed 10 seconds to wait the mmc device out from busy
status. 500 milliseconds enough.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-07-27 20:15:48 -06:00
Simon Glass
f1a485aa40 dm: socfpga: mmc: Support CONFIG_BLK
Update the driver to support using driver model for block devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:15:54 -06:00
Simon Glass
329a449f2c dm: mmc: zynq: Convert zynq to use driver model for MMC
Move zynq to the latest driver model support by enabling CONFIG_DM_MMC,
CONFIG_DM_MMC_OPS and CONFIG_BLK.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:15:54 -06:00
Jaehoon Chung
5628347f59 dm: mmc: dwmmc: use the callback functions as static
There are no places to call these functions.
It should be used the callback function.
Then it can be used as static functions.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-27 14:14:37 -06:00
Kever Yang
79c830653b mmc: rockchip: add SDHCI driver support for rockchip soc
Rockchip rk3399 using arasan sdhci-5.1 controller.
This patch add the controller support to enable mmc device
with full driver-model support, tested on rk3399 evb board.

According to my test result, this driver should be OK,
the command "part list mmc 0" can result in a right output,
but all the mmc command failed like this:
	=> mmc info
	No MMC device available
	Command failed, result=1

The result of get_mmc_num in cmd/mmc.c is always 0?

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-25 20:46:46 -06:00
Masahiro Yamada
4e3d84066e ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()
This does not have much impact on behavior, but makes code look more
more like Linux.  The use of devm_ioremap() often helps to delete
.remove callbacks entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24 00:13:10 +09:00
Siva Durga Prasad Paladugu
1d405e207b mmc: sdhci: Disable internal clock enable bit
Disable internal clock by clearing the internal
clock enable bit. This bit needs to be cleared too
when we stop the SDCLK for changing the frequency
divisor. This bit should be set to zero when the
device is not using the Host controller.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:03:50 +02:00
Robert P. J. Day
62a3b7dd08 Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:

     * "compatble" -> "compatible"
     * "eanbeld" -> "enabled"
     * "envrionment" -> "environment"
     * "FTD" -> "FDT" (for "flattened device tree")
     * "ommitted" -> "omitted"
     * "overriden" -> "overridden"
     * "partiton" -> "partition"
     * "propogate" -> "propagate"
     * "resourse" -> "resource"
     * "rest in piece" -> "rest in peace"
     * "suport" -> "support"
     * "varible" -> "variable"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-07-16 09:43:12 -04:00
Tom Rini
1f9ef0dca0 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-07-15 10:44:01 -04:00
Hans de Goede
ef36d9ae16 sunxi: Use BROM stored boot_media value to determine our boot-source
Now that we know that the BROM stores a value indicating the boot-source
at the beginning of SRAM, use that instead of trying to recreate the
BROM's boot probing.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-07-15 15:54:56 +02:00
Tom Rini
926fbcc083 Merge branch 'master' of git://git.denx.de/u-boot-samsung 2016-07-15 08:06:42 -04:00
Tobias Doerffel
26c0c15786 sunxi: mmc: increase status register polling rate for data transfers
With a recent bunch of SD3.0 cards in our A20-based board we
experienced data transfer rates of about 250 KiB/s instead of 10 MiB/s
with previous cards from the same vendor (both 4 GB/class 10). By
increasing status register polling rate from 1 kHz to 1 MHz we were
able to reach the original transfer rates again. With the old cards
we now even reach about 16 MiB/s.

Signed-off-by: Tobias Doerffel <tobias.doerffel@ed-chemnitz.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-07-15 08:34:34 +02:00
Simon Glass
bfeb443e3d rockchip: mmc: Update the driver to support of-platdata
Add support for of-platdata with rk3288. This requires decoding the
of-platdata struct and setting up the device from that. Also the driver
needs to be renamed to match the string that of-platdata will search for.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Simon Glass
6809b04f48 rockchip: mmc: Move all DT decoding to ofdata_to_platdata()
It is more correct to avoid touching the device tree in the probe() method.
Update the driver to work this way.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14 20:40:24 -06:00
Jaehoon Chung
3537ee879e mmc: exynos_dw_mmc: support the Driver mode for Exynos
This patch support the driver mode for exynos dwmmc controller.
To support the legacy model, maintained the existing code.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-07-12 14:29:10 +09:00
Jaehoon Chung
70f6d39433 mmc: exynos_dw_mmc: use the 4bit bus-width by default
If there is not "samsung,bus-width" property, use the 4bit buswidth by
default.
Almost all Exnyos SoCs support at least 4bit buswidth.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-07-12 14:28:58 +09:00
Jaehoon Chung
d956a67ed1 mmc: exynos_dw_mmc: clean the unused and unnecessary codes
Clean the unused and unnecessary codse.
This patch is one of them for preparing to use DM.
Because it's easy to maintain and combine DM after cleaning codes.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-07-12 14:28:52 +09:00
Jaehoon Chung
ce757b18fb mmc: exynos_dw_mmc: add the error control for checking index
PERIPH_ID_SDMMC4(131) is not continous value with PERIPH_ID_SDMMC0(75).
If there is no 'index' property in fdt, then dev_index should be
assigned to dev_id(Peripheral ID).
At this time, dev_index should be "56". It means Exynos SoC has "56"
numbers of DWMMC IP. To prevent this behavior, it needs to check the
maximum device index.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-07-12 14:28:47 +09:00
Jaehoon Chung
f565ea59cb mmc: exynos_dw_mmc: remove #ifdef for OF_CONTROL
Removed #ifdef for OF_CONTROL.
It might use 'OF_CONTROL' by default.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-07-12 14:28:42 +09:00
Jaehoon Chung
fb6706cfda mmc: exynos_dw_mmc: remove the unused function
This function have maintained for supporting Non-FDT.
Now, Almost all SoC are changed to fdt style.
So there are no that this function is called anywhere.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-07-12 14:28:37 +09:00
Simon Glass
4b00bdb7a4 dm: mmc: msmsdhic: Drop old MMC code
Now that we have fully moved to driver model, drop the old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
12293f6d36 dm: mmc: msm_sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS
Add support for using driver model for block devices and MMC operations in
this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
ef1e4eda6b dm: mmc: sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS
Add support for using driver model for block devices and MMC operations in
this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
2a809093f0 dm: mmc: sdhci: Refactor configuration setup to support DM
Move the configuration setting into a separate function which can be used by
the driver-model code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
9a46bd3feb dm: sandbox: Convert to use CONFIG_CMD_MMC_OPS
Update the sandbox MMC emulation to use driver model for MMC operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
42b37d8d46 dm: mmc: rockchip: Enable CONFIG_DM_MMC_OPS for all boards
Enable this option to move rockchip over to use driver model for MMC
operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
691272fe52 dm: mmc: dwmmc: Support CONFIG_DM_MMC_OPS
Add support to dwmmc for using driver model for MMC operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
8ca51e51c1 dm: mmc: Add a way to use driver model for MMC operations
The driver model conversion for MMC has moved in small steps. The first step
was to have an MMC device (CONFIG_DM_MMC). The second was to use a child
block device (CONFIG_BLK). The final one is to use driver model for MMC
operations (CONFIG_DM_MMC_OP). Add support for this.

The immediate priority is to make all boards that use DM_MMC also use those
other two options. This will allow them to be removed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
c0c76ebae3 mmc: Move tracing code into separate functions
Move this code into separate functions so that it can be used from the uclass
also. Add static inline versions for when the option is disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
6775e013c9 dm: mmc: rockchip: Support only CONFIG_BLK
Since all Rockchip boards use CONFIG_BLK, we can remove this old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
c40704f4b1 mmc: Move MMC boot code into its own file
Rather than having an #ifdef in the main mmc.c file, control this feature
from the Makefile by moving the code into its own file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
5aed4cbba0 dm: mmc: Move non-CONFIG_BLK code into mmc_legacy.c
Rather than having #ifdef in mmc.c, move this code into the legacy file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
eede897e27 dm: mmc: Move CONFIG_BLK code into the mmc uclass
Rather than having #ifdef in mmc.c, move this code into the uclass file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Simon Glass
7dba0b9367 mmc: Add function declarations for mmc_bread() and mmc_switch_part()
These private functions are used both in the driver-model implementation and
in the legacy code. Add them to the header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-11 14:06:44 -06:00
Mateusz Kulikowski
eb9d3ca356 mmc: msm_sdhci: Set mmc->dev pointer in msm_sdc_probe()
MMC core expects (now) valid mmc->dev pointer.
During conversion in commit cffe5d86 not every driver was updated.

This patch fixes crash while accessing MMC on
boards using Qualcomm SDHCI controller.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-07-08 09:57:30 -04:00
Steve Rae
d90bb43933 mmc: increase MMC SDHCI read status timeout
Otherwise,  ocassionally see errors like this:
  Flashing sparse image at offset 2078720
  Flashing Sparse Image
  sdhci_send_command: Timeout for status update!
  mmc fail to send stop cmd
  write_sparse_image: Write failed, block #2181088 [0]

This does not affect the actual writing speed, which is controlled by
the default value:
  CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT

It only increases the retries when reading:
  SDHCI_INT_STATUS
to avoid the timeout error.

Signed-off-by: Steve Rae <steve.rae@raedomain.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-07-01 17:42:57 -04:00
Tom Rini
44faff24f5 Merge git://git.denx.de/u-boot-fsl-qoriq 2016-06-28 15:59:05 -04:00
Peng Fan
1483151e84 mmc: fsl: introduce wp_enable
Introudce wp_enable. To check WPSPL, wp_enable needs to be set
to 1 in board code.

Take i.MX6UL for example, for some boards, they do not use WP singal,
so they does not configure USDHC1_WP_SELECT_INPUT, and its default
value is 0(GPIO1_IO02). However GPIO1_IO02 is muxed for i2c usage and
SION bit set. So USDHC controller can always get wp signal and WPSPL
shows write protect and blocks driver continuing. This is not what
we want to see, so add wp_enable, and if set to 0, just omit the
WPSPL checking and this does not effect normal working of usdhc
controller.

If wp-gpios is provided in dts, wp_enable is set to 1, otherwise 0.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-28 12:08:53 -07:00
Ye Li
84ecdf6da9 fsl_esdhc: Update clock enable bits for USDHC
The USDHC moves the 4 clock bits CARD_CLK_SOFT_EN, IPG_PERCLK_SOFT_EN,
HCLK_SOFT_EN, and IPG_CLK_SOFT_EN from sysctl register to vendorspec
register. The driver uses RSTA to replace the clock gate off
operation. But this is not a good solution because:
1. when using RSTA, we should wait this bit to clear by itself. This is not
   implemeneted in the code.
2. After RSTA is set, it is recommended that the Host Driver reset the
   external card and reinitialize it.

So in this patch, we change to use the vendorspec registers for these bits
operation.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-28 12:08:53 -07:00
Peng Fan
f53225cce4 mmc: fsl: reset to normal boot mode when eMMC fast boot
When booting in eMMC fast boot, MMC host does not exit from
boot mode after bootrom loading image. So the first command
'CMD0' sent in uboot will pull down the CMD line to low and
cause errors.

This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.

Also clear DLL_CTRL delay line settings at USDHC initialization
to eliminate the pre-settings from boot rom.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-28 12:08:53 -07:00
Jaehoon Chung
ca2ec9adc9 mmc: dw_mmc: fix the wrong AND operation
These condition checking are wrong.
Original Author's intention might be "&" instead of "&&".
It can know whether receive or transmit data request with
BIT[4]/BIT[5] of RINTSTS register.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-06-27 09:43:26 +09:00
Stefan Wahren
1a3619cf82 mmc: add MMC_VERSION_5_1
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2016-06-20 05:14:46 -04:00
Stephen Warren
135aa95002 clk: convert API to match reset/mailbox style
The following changes are made to the clock API:
* The concept of "clocks" and "peripheral clocks" are unified; each clock
  provider now implements a single set of clocks. This provides a simpler
  conceptual interface to clients, and better aligns with device tree
  clock bindings.
* Clocks are now identified with a single "struct clk", rather than
  requiring clients to store the clock provider device and clock identity
  values separately. For simple clock consumers, this isolates clients
  from internal details of the clock API.
* clk.h is split so it only contains the client/consumer API, whereas
  clk-uclass.h contains the provider API. This aligns with the recently
  added reset and mailbox APIs.
* clk_ops .of_xlate(), .request(), and .free() are added so providers
  can customize these operations if needed. This also aligns with the
  recently added reset and mailbox APIs.
* clk_disable() is added.
* All users of the current clock APIs are updated.
* Sandbox clock tests are updated to exercise clock lookup via DT, and
  clock enable/disable.
* rkclk_get_clk() is removed and replaced with standard APIs.

Buildman shows no clock-related errors for any board for which buildman
can download a toolchain.

test/py passes for sandbox (which invokes the dm clk test amongst
others).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Eddy Petrișor
9702ec00e9 armv8: s32v234: Introduce basic support for s32v234evb
Add initial support for NXP's S32V234 SoC and S32V234EVB board.

The S32V230 family is designed to support computation-intensive applications
for image processing. The S32V234, as part of the S32V230 family, is a
high-performance automotive processor designed to support safe
computation-intensive applications in the area of vision and sensor fusion.

Code originally writen by:
Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com>
Original-signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>

Signed-off-by: Eddy Petrișor <eddy.petrisor@nxp.com>
2016-06-13 08:56:35 -04:00
Heiko Schocher
3d4f628d2f mmc: omap_hsmmc: enable 8bit interface for eMMC for AM33xx
Enable 8bit interface on HSMMC2 for am33xx to support 8bit eMMC chips.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-09 13:53:09 -04:00
Heiko Schocher
a5e27b416f mmc: revert mmc: Handle switch error status bit in MMC card status
revert patch:
commit: 6b2221b008: mmc: Handle switch error status bit in MMC card status

to get eMMC working on shc board

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-06-09 13:53:08 -04:00
Tom Rini
c41c649c2f Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-06-04 08:49:08 -04:00
Yangbo Lu
cc634e2836 mmc: fsl_esdhc: fix check_and_invalidate_dcache_range function
In function check_and_invalidate_dcache_range(), there are incorrect
start address and end address of the dcache range calculated for
Layerscape platforms. This patch is to fix this issue.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:05 -07:00
Stephen Warren
39f633320c mmc: tegra: add basic Tegra186 support
Tegra186's MMC controller needs to be explicitly identified. Add another
compatible value for it.

Tegra186 will use an entirely different clock/reset control mechanism to
existing chips, and will use standard clock/reset APIs rather than the
existing Tegra-specific custom APIs. The driver support for that isn't
ready yet, so simply disable all clock/reset usage if compiling for
Tegra186. This must happen at compile time rather than run-time since the
custom APIs won't even be compiled in on Tegra186. In the long term, the
plan would be to convert the existing custom APIs to standard APIs and get
rid of the ifdefs completely.

The system's main eMMC will work without any clock/reset support, since
the firmware will have already initialized the controller in order to
load U-Boot. Hence the driver is useful even in this apparently crippled
state.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-31 11:22:59 -07:00
Simon Glass
e6c28073f9 dm: mmc: Use cfg directly in mmc_bind()
This small change tidies up the code slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 10:23:10 -06:00
Simon Glass
e419a3ec1a dm: mmc: Fix up mmc_bread/bwrite() prototypes for SPL
When these functions are not compiled in, we still need to declare the
correct function signature to avoid a build warnings in SPL. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 10:23:10 -06:00
Simon Glass
f6e41d17ab dm: rockchip: mmc: Allow use of CONFIG_BLK
Allow driver model to be used for block devices in the rockchip mmc driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 10:23:09 -06:00
Simon Glass
5e6ff810c3 dm: mmc: dwmmc: Support CONFIG_BLK
Add support for using driver model for block devices in this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 10:23:09 -06:00
Simon Glass
19d2e34237 dm: mmc: Convert sdhci to support CONFIG_BLK
Update sdhci.c so that it works with driver model enabled for block devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 10:23:08 -06:00
Simon Glass
61fe076f0f mmc: Use byte array for multipliers
We don't need an int since no value is over 80. This saves a small amount of
SPL space (about 44 bytes).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:50:29 -06:00
Simon Glass
e98dd20cce mmc: Drop mmc_register()
This function is no longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:50:29 -06:00
Simon Glass
f376a3cbbf dm: mmc: sandbox: Add an SD-card emulation
Add an emulation of an SD card to sandbox, allowing MMC to be used in tests.
The emulation is very simple, supporting only card detection and reading
test data.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
33fb211dd2 dm: mmc: Add support for driver-model block devices
Add support for enabling CONFIG_BLK with MMC. This involves changing a
few functions to use struct udevice and adding a MMC block device driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
ad27dd5e13 dm: mmc: Add a way to bind MMC devices with driver model
Binding an MMC device when CONFIG_BLK is enabled requires that a block
device be bound as a child of the MMC device. Add a function to do this.
The mmc_create() method will be used only when DM_BLK is disabled.

Add an unbind method also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
8ef761ed4c dm: mmc: Implement the MMC functions for block devices
Implement the functions in mmc_legacy.c for driver-model block devices, so
that MMC can use driver model for these. This allows CONFIG_BLK to be enabled
with DM_MMC.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
f8b7752e8f dm: sandbox: Only enable the sandbox MMC driver when valid
This driver will require generic MMC and block-device support in a future
commit. To avoid test errors, make this change now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
fdbb139f0c dm: mmc: Adjust mmc_switch_part() to use a struct mmc
Instead of looking up the MMC device by number, just pass it in. This makes
it possible to use this function with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
c40fdca6b7 dm: mmc: Move the device list into a separate file
At present the MMC subsystem maintains its own list of MMC devices. This
cannot work with driver model, which needs to maintain this itself. Move the
list code into a separate 'legacy' file. The core MMC code remains, and will
be shared with the driver-model implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
cffe5d86cf dm: mmc: Set up the device pointer when using the MMC uclass
Update the existing drivers to set up this new pointer. This will be required
by the MMC uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
69f45cd53b dm: mmc: Use the new select_hwpart() API
Avoid calling directly into the MMC code - use the new API call instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
cb5ec33d90 dm: mmc: Add a function to obtain the block device
The MMC block device is contained within struct mmc. But with driver model
this will not be the case. Add a function to obtain the block device. We
can later implement this for CONFIG_BLK.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
e17d1143c1 dm: mmc: Implement the select_hwpart() method
Implement this method so that hardware partitions will work correctly with
MMC.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
ff3882ac23 dm: mmc: Move mmc_switch_part() above its callers
This function is defined after it is used. In preparation for making it
static, move it up a little. Also drop the printf() which should not appear
in a driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
3c457f4d2e dm: mmc: Drop the get_dev() function
This function is implemented by the legacy block functions now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Simon Glass
663acabdc5 dm: mmc: Add a legacy block interface for MMC
Add a legacy block interface for MMC.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Masahiro Yamada
cacd1d2f33 mmc: sdhci: add const qualifier to the name of struct sdhci_host
This allows to drop annoying (char *) casts when setting the host
name of struct sdhci_host.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-25 15:10:42 -04:00
Mugunthan V N
5cc6a2458e drivers: mmc: omap_hsmmc: request cd and wp gpios when DM_MMC is defined
Add request gpio for CD and WP gpios, so that the gpio can be
used for the respective purposes.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 12:29:16 -04:00
Mugunthan V N
4bc5e19e12 drivers: mmc: omap_hsmmc: Fix conversion of address to a pointer
omap_hsmmc driver directly typecasts fdt_addr_t to a pointer.
This is not strictly correct, as it gives a build warning when
fdt_addr_t is u64. So, use map_physmem for a proper typecasts.

This is inspired by commit 167efe01bc ("dm: ns16550: Use an address
instead of a pointer for the uart base")

drivers/mmc/omap_hsmmc.c: In function ‘omap_hsmmc_ofdata_to_platdata’:
drivers/mmc/omap_hsmmc.c:776:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  priv->base_addr = (struct hsmmc *)dev_get_addr(dev);
                      ^

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-04-18 12:29:15 -04:00
Marek Vasut
dafd5792a8 arm: socfpga: Nuke useless include
The dwmmc.h include was forgotten during the migration of dwmmc
probing to DM. Since the shiny DM is in place now, remove this
relic of the past.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
2016-04-10 17:19:49 +02:00
Peng Fan
96f0407b00 fsl: esdhc: support driver model
Support Driver Model for fsl esdhc driver.

1. Introduce a new structure struct fsl_esdhc_priv
2. Refactor fsl_esdhc_initialize which is originally used by board code.
   - Introduce fsl_esdhc_init to be common usage for DM and non-DM
   - Introduce fsl_esdhc_cfg_to_priv to build the bridge for non-DM part.
   - The original API for board code is still there, but we use
     'fsl_esdhc_cfg_to_priv' and 'fsl_esdhc_init' to serve it.
3. All the functions are changed to use 'struct fsl_esdhc_priv', except
   fsl_esdhc_initialize.
4. Since clk driver is not implemented, use mxc_get_clock to geth
   the clk and fill 'priv->sdhc_clk'.

Has been tested on i.MX6UL 14X14 EVK board:
"
=>dm tree
....
 simple_bus  [ + ]    |   `-- aips-bus@02100000
  mmc        [ + ]    |       |-- usdhc@02190000
  mmc        [ + ]    |       |-- usdhc@02194000
....
=> mmc list
FSL_SDHC: 0 (SD)
FSL_SDHC: 1 (SD)
"

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Hector Palacios <hector.palacios@digi.com>
Cc: Eric Nelson <eric@nelint.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-By: Eric Nelson <eric@nelint.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-04-06 08:33:37 -07:00
Mateusz Kulikowski
9d11d12a16 mmc: Add support for Qualcomm SDHCI controller
Add support for SD/eMMC controller present on some Qualcomm Snapdragon
devices. This controller implements SDHCI 2.0 interface but requires
vendor-specific initialization.
Driver works in PIO mode as ADMA is not supported by U-Boot (yet).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:08 -04:00
Tom Rini
40345e9ea7 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2016-04-01 08:17:55 -04:00
Siarhei Siamashka
d96ebc468d sunxi: Add support for Allwinner A64 SoCs
The Allwinner A64 SoC is used in the Pine64. This patch adds
all bits necessary to compile U-Boot for it running in AArch64
mode.

Unfortunately SPL is not ready yet due to legal problems, so
we need to boot using the binary boot0 for now.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
[agraf: remove SPL code, move to AArch64]
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:52:28 +02:00
Alexander Graf
0ea5a04fbc sunxi: Explicitly cast u32 pointer conversions
Some parts of the sunxi code cast explicitly between u32 values and pointers.
This is not a problem in practice, because all 64bit SoCs today only use the
lower 32 bits for their phyical address space. But we need to make sure that
the compiler is sure this is not an accident as well.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:52:28 +02:00
Masahiro Yamada
4f80501b91 mmc: uniphier: use devm_get_addr() to get base address
Currently, fdtdec_get_addr_size() does not support the address
translation, so it cannot handle device trees with non-straight
"ranges" properties.  (This would be a problem with DTS for UniPhier
ARMv8 SoCs.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:17:19 +09:00
Bin Meng
7863ce5891 mmc: Print send_cmd response only when return value is zero
send_cmd response is valid only when no error happened. If an error
occured, let mmc_send_cmd() print the return value to aid debugging.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27 09:12:24 -04:00
Bin Meng
53e8e40b47 mmc: Fix switch..case indention
Correct the indention level of switch..case statements.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27 09:12:24 -04:00
Stephen Warren
a481a15600 mmc: bcm2835: fix 64-bit build warning
Fixes:
drivers/mmc/bcm2835_sdhci.c: In function ‘bcm2835_sdhci_init’:
drivers/mmc/bcm2835_sdhci.c:181:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-27 09:12:21 -04:00
Alexander Graf
9b5b8b6ee1 dwmmc: Increase retry timeout
When enable dcache on HiKey, we're running into MMC command timeouts
because our retry loop is now faster than the eMMC (or an external SD
card) can answer.

Increase the retry count to the same as the timeout value for status
reports.

The real fix is obviously to not base this whole thing on a cycle counter
but on real wall time, but that would be slightly more intrusive.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15 15:13:05 -04:00
Paul Kocialkowski
fbf1b08a93 omap_hsmmc: Board-specific TWL6030 MMC power initialization
Boards using the TWL6030 regulator may not all use the LDOs the same way.
Some might also not use MMC1 at all, so VMMC would't have to be enabled.

This delegates TWL6030 MMC power initializations to board-specific functions,
that may still call twl6030_power_mmc_init for the default behavior.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15 15:11:29 -04:00
Paul Kocialkowski
a85362fb3e power: twl6030: Device-index-specific MMC power initialization
Not every device has multiple MMC slots available, so it makes sense to enable
only the required LDOs for the available slots. Generic code in omap_hsmmc will
enable both VMMC and VAUX1, in doubt.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2016-03-15 15:10:51 -04:00
Tom Rini
88033d737d Merge git://git.denx.de/u-boot-dm 2016-03-14 19:21:44 -04:00
Stefan Roese
ecb57f69b2 lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start value
The original name of this function is unclear. This patch renames this
CRC16 function to crc16_ccitt() matching its name with its
implementation.

To make the usage of this function more flexible, lets add the CRC start
value as parameter to this function. This way it can be used by other
functions requiring different start values than 0 as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:42 -04:00
Simon Glass
bcce53d048 dm: block: Rename device number member dev to devnum
This is a device number, and we want to use 'dev' to mean a driver model
device. Rename the member.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3e8bd46950 dm: part: Rename some partition functions
Rename three partition functions so that they start with part_. This makes
it clear what they relate to.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Masahiro Yamada
a111bfbfad mmc: uniphier: add driver for UniPhier SD/MMC host controller
Add a driver for the on-chip SD/eMMC host controller used by
UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:15 +09:00
Michal Simek
ce0335f2b4 mmc: Kconfig: Add Arasan SDHCI entry
Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:02 +01:00
Simon Glass
e05ab0dae8 tegra: mmc: Fix comments in the MMC driver init
Fix the SoC names in two comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:50 -07:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00
Tom Rini
161b1fe745 Merge branch 'master' of git://git.denx.de/u-boot-atmel 2016-02-02 07:24:52 -05:00
Andrei Pistirica
102142c9e0 drivers: mmc: add driver for Microchip PIC32 SDHCI controller.
This driver implements platform specific glue and fixups for
PIC32 internal SDHCI controller.

Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-02-01 22:14:01 +01:00
Tom Rini
cd85bec36d Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2016-01-27 15:05:36 -05:00
Yangbo Lu
25503443ee mmc: fsl_esdhc: set Abort command type for CMD12
According to SD spec, CMD12, CMD52 for writing I/O abort in CCCR need
to be set an Abort command type when they are sent. So, we remove all
chip-specific #ifdefs and make it available for all platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:13:13 -08:00
Yangbo Lu
e978a31b63 mmc: fsl_esdhc: increase data transaction timeout to 500ms
The MMC spec says "It is strongly recommended for hosts to implement
more than 500ms timeout value even if the card indicates the 250ms
maximum busy length."  Even the previous value of 300ms is known to
be insufficient for some cards. So, increase the timeout to 500ms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-27 08:13:12 -08:00
Siva Durga Prasad Paladugu
b215614638 mmc: zynq_sdhci: Added qurik to disable high speed
Add quirk to disable high speed incase the high
speed was broken.This solves the issue where the
the controller is used in High Speed Mode and the
the hold time requirement for the JEDEC/MMC 4.41
specification is NOT met.
This timing issue is not on all boards and hence
provided config option to enable it when required.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Emil Lenchak <emill@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
Siva Durga Prasad Paladugu
4297900260 mmc: sdhci: Clear high speed if not supported
Clear high speed bit if it was not supported by
the driver.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Emil Lenchak <emill@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
Siva Durga Prasad Paladugu
a57a4a5d83 sdhci: zynq: Remove hardcoded value zero as min frequency
Remove hardcoded value zero as min frequency and
use config option CONFIG_ZYNQ_SDHCI_MIN_FREQ
defined in board config

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:54 +01:00
Gregory CLEMENT
b4670a0c2b mmc: atmel: Properly fix clock configuration
Timing issue occurs on eMMC not only when modifying the frequency but
also for all the switch command(CMD6). According to the MMC spec waiting
8 clocks after a switch command would be the thing to do.

This patch allows fixing CPU hang observed when trying to changing the
bus width on a eMMC on SAMA5D4.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Marek Vasut <marex@denx.de> # on DENX MA5D4EV
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com> # on atngw100
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fixed minor checkpatch warning]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-01-27 13:58:58 +01:00
Simon Glass
898d64395c rockchip: Use a separate clock ID for clocks
At present we use the same peripheral ID for clocks and pinctrl. While this
works it is probably better to use the device tree clock binding ID for
clocks. We can use the clk_get_by_index() function to find this.

Update the clock drivers and the code that uses them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Simon Glass
e1efec4e0a rockchip: mmc: Use a pwrseq device if available
Use the pwrseq uclass to find a suitable power sequence for the MMC device.
If this is enabled in the device tree, we will pick it up automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Simon Glass
4a1db6d8ab dm: mmc: Try to honour the sequence order
At present we add driver-model MMC devices in the order we find them. The
'alias' order is not honoured.

It is difficult to fix this for the case where we have holes in the
sequence. But for the common case where the devices are numbered from 0
without any gaps, we can add the devices to the internal data structures
in this order.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-20 19:06:22 -07:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
huang lin
6579385b46 mmc: rockchip: the non-removable property must point to emmc
the non-removable property point to sdcard before, it is wrong,
it must point to emmc, correct it.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-15 05:39:27 -07:00
Stephen Warren
873cc1d777 mmc: store hwpart in the block device
This will allow us to have multiple block device structs each referring
to the same eMMC device, yet different HW partitions.

For now, there is still a single block device per eMMC device. As before,
this block device always accesses whichever HW partition was most recently
selected. Clients wishing to make use of multiple block devices referring
to different HW partitions can simply take a copy of this block device
once it points at the correct HW partition, and use each one as they wish.
This feature will be used by the next patch.

In the future, perhaps get_device() could be enhanced to return a
dynamically allocated block device struct, to avoid the client needing to
copy it in order to maintain multiple block devices. However, this would
require all users to be updated to free those block device structs at some
point, which is rather a large change.

Most callers of mmc_switch_part() wish to permanently switch the default
MMC block device's HW partition. Enhance mmc_switch_part() so that it does
this. This removes the need for callers to do this. However,
common/env_mmc.c needs to save and restore the current HW partition. Make
it do this more explicitly.

Replace use of mmc_switch_part() with mmc_select_hwpart() in order to
remove duplicate code that skips the call if that HW partition is already
selected.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:19 -05:00
Stephen Warren
7c4213f6a5 block: pass block dev not num to read/write/erase()
This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-13 21:05:18 -05:00
Simon Glass
4abe8e40a7 dm: Convert PCI MMC over to use DM PCI API
At present pci_mmc_init() does not correctly use the PCI function since the
list it passes is not terminated. The array size passed to pci_mmc_init() is
actually not used correctly. Fix this and adjust the pci_mmc_init() to scan
all available MMC devices.

Adjust this code to use the new driver model PCI API.

This should move over to the new MMC uclass at some point.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Eric Nelson
1aa2d074a7 mmc: update MMC_ERASE argument to match Linux kernel.
Table 41 of the JEDEC standard for eMMC says that bit 31 of
the command argument is obsolete when issuing the ERASE
command (CMD38) on page 115 of this document:
	http://www.jedec.org/sites/default/files/docs/jesd84-B45.pdf

The SD Card Association Physical Layer Simplified Specification also
makes no mention of the use of bit 31.
	https://www.sdcard.org/downloads/pls/part1_410.pdf

The Linux kernel distinguishes between secure (bit 31 set) and
non-secure erase, and this patch copies the macro names from
include/linux/mmc/core.h.

Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Eric Nelson <eric@nelint.com>
Tested-by: Hector Palacios <hector.palacios@digi.com>
2016-01-04 11:17:43 -05:00
Tom Rini
f1993ca066 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2016-01-03 10:32:24 -05:00
Eric Nelson
f0b5f23f32 ARM: imx: fsl_esdhc: fix usage of low 4 bits of sysctl register
The low four bits of the SYSCTL register are reserved on the USDHC
controller on i.MX6 and i.MX7 processors, but are used for clocking
operations on earlier models.

Guard against their usage by hiding the bit mask macros on those
processors.

These bits are used to prevent glitches when changing clocks on
i.MX35 et al. Use the RSTA bit instead for i.MX6 and i.MX7.

>From the i.MX6DQ RM:
	To prevent possible glitch on the card clock, clear the
	FRC_SDCLK_ON bit when changing clock divisor value(SDCLKFS
	or DVS in System Control Register) or setting RSTA bit.

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Hector Palacios <hector.palacios@digi.com>
2016-01-03 15:21:21 +01:00
Dinh Nguyen
a1684b6105 arm: socfpga: fix up a questionable macro for SDMMC
Move the macro into the socfpga_dwmci_clksel().

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Marek Vasut <marex@denx.de>
[fix parenthesis in the sdmmc_mask]
2015-12-20 03:44:56 +01:00
Sjoerd Simons
fc011f6402 mmc: mmc: Don't use sprintf when using tiny-printf
There is no sprintf implementation in tiny-printf, so don't try to use
it when tiny-printf if used.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2015-12-13 17:07:31 -07:00
Tom Rini
dcf4cb068e Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze 2015-12-07 08:13:02 -05:00
Michal Simek
d9ae52c8f0 zynq: sdhci: Move driver to DM
Move driver to DM

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-07 10:14:29 +01:00
Michal Simek
400434537b zynq: sdhci: Remove zynq_sdhci_of_init()
Prepare for using DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07 10:14:29 +01:00
Siva Durga Prasad Paladugu
b8a9bebeec zynq: sdhci: Calculate minimum frequency based on max frequency
Calculate the minimum sd clock based on max clock. This will
be done by add_sdhci() if we pass minimum clock as zero.
It also does based on SD host contoller version.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07 10:14:29 +01:00
Marek Vasut
c35ed77a78 mmc: dwmmc: socfpga: Convert to DM
Convert the SoCFPGA shim for registering the DWMMC driver to DM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2015-12-07 00:15:59 +01:00
huang lin
2863724831 rockchip: mmc: get the fifo mode and fifo depth property from dts
rk3036 mmc do not have internal dma, so we use fifo mode when read
and write data, we get the fifo mode and fifo depth property from
dts, pass to dw_mmc driver.

Signed-off-by: Lin Huang <hl@rock-chips.com>
2015-12-01 08:07:22 -07:00
huang lin
ace2198b7c rockchip: mmc: use non-removable property to distinguish emmc and sdcard register
emmc and sdcard have different register address, use non-removeable property
to distinguish them.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
huang lin
a65f51b978 mmc: dw_mmc: support fifo mode in dwc mmc driver
some soc(rk3036 etc) use dw_mmc but do not have internal dma,
so we implement fifo mode to read and write data.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
huang lin
f382eb833a mmc: dw_mmc: move data transfer as a separate function
the data transfer seem to long in the dwmci_send_cmd function,
so move this block as a separate funciton.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
Chin Liang See
9a41404dc6 mmc: socfpga_dw_mmc: Move drvsel and smplsel to dts
socfpga_dw_mmc driver will obtain the drvsel and
smplsel value from device tree instead of definition
in config header file.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Marek Vasut <marex@denx.de>
2015-11-30 13:30:19 +01:00
Michal Simek
f3bd72801a zynq: sdhci: Define max clock by macro
zc1571 with silicon can operate on 200MHz maximum frequency. Setup this
frequency by default and fix setting for ep108.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19 14:03:05 +01:00
Prabhakar Kushwaha
41f7be3c78 driver: dwmmc: Fix pointer conversion warnings for hikey
Fix below compilation warings happening for hikey_defconfig

drivers/mmc/dw_mmc.c: In function ‘dwmci_set_idma_desc’:
drivers/mmc/dw_mmc.c:43:20: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac);
                    ^
drivers/mmc/dw_mmc.c: In function ‘dwmci_prepare_data’:
drivers/mmc/dw_mmc.c:61:35: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
                                   ^
drivers/mmc/dw_mmc.c:73:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
         (u32)bounce_buffer + (i * PAGE_SIZE));
         ^
  CC      drivers/mmc/hi6220_dw_mmc.o
drivers/mmc/hi6220_dw_mmc.c: In function ‘hi6220_dwmci_add_port’:
drivers/mmc/hi6220_dw_mmc.c:51:17: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  host->ioaddr = (void *)regbase;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2015-11-12 15:59:00 -05:00
Tom Rini
60b25259a5 Merge git://git.denx.de/u-boot-samsung 2015-11-05 07:46:45 -05:00
Wenyou Yang
a3b59b1523 mmc: atmel: Add atmel sdhci support
The SDHCI is introduced by sama5d2, named as Secure Digital Multimedia
Card Controller(SDMMC). It supports the embedded MultiMedia Card (e.MMC)
Specification V4.41, the SD Memory Card Specification V3.0, and the SDIO
V3.0 specification. It is compliant with the SD Host Controller Standard
V3.0 specification.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-03 14:21:31 +01:00
Wenyou Yang
79667b7b76 mmc: sdhci: Fix the SD clock stop sequence
According to the SDHC specification, stopping the SD Clock is by setting
the SD Clock Enable bit in the Clock Control register at 0, instead of
setting all bits at 0.

Before stopping the SD clock, we need to make sure all SD transactions
to complete, so add checking the CMD and DAT bits in the Presen State
register, before stopping the SD clock.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2015-11-03 14:21:30 +01:00
Yangbo Lu
bf50be835e mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card
When detecting SDHC Adapter Card Type 2(SD/MMC Legacy Adapter Card),
enable EVDD automatic control via SDHC_VS. This could support SD card
IO voltage switching for UHS-1 speed mode.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02 08:50:29 -08:00
Yangbo Lu
cdc69550d2 mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5 Adapter Card
If adapter card type identification is supported for platform, we would
enable dat[4:7] for eMMC4.5 Adapter Card.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02 08:49:51 -08:00
Shaohui Xie
512bdbd46a Powerpc: eSDHC: expand a fix to T4160
commit b8e5b07225 "Powerpc: eSDHC: Fix mmc read write err in uboot of
T4240QDS board", T4160 also needs this fix.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02 08:49:32 -08:00
Przemyslaw Marczak
96094d4c46 s5p sdhci: call pinmux for card's gpio pins before use them
The SD card detection depends on checking one pin state.
But the pin was configured after card was detected, which is wrong.

This commit fixes this, by moving call to pinmux before use the pin.

Tested-on: Odroid U3 and Odroid X2.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:14 +09:00
Marek Vasut
877807e193 mmc: atmel: Zap global 'initialized' variable
Global variables are bad. Get rid of this particular one, so we can
correctly instantiate multiple atmel mci interfaces, without having
them interfere with one another.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01 22:02:15 +01:00
Marek Vasut
6b75d35949 mmc: atmel: Implement proper private data
Instead of passing just the register area as a private data, introduce
a proper struct atmel_mci_priv structure instead. This will become useful
in the subsequent patch, where we eliminate the global variable from this
driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fix free()]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01 22:02:15 +01:00
Marek Vasut
ecfb0ff812 mmc: atmel: Fix clock configuration
After silencing the prints which were generated when reconfiguring the
clock of the SD/MMC bus, surprisingly, the driver stopped working such
that every attempt to use the SD/MMC bus caused the CPU to get totally
stuck hard. It turns out that the prints generated a short delay, which
was necessary for the CPU to reconfigure the clock without getting stuck.
Thus, this patch adds a short delay after the clock configuration instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01 22:02:15 +01:00
Marek Vasut
b84c9c9a98 mmc: atmel: Silence debug output
This driver generates clearly debugging prints when changing clock
speed, so silence those. Furthermore, the driver generates further
prints in case a command fails to complete. The later case woud be
useful, but for eMMC, command 8 can fail and it's not an error but
a part of the specification. Thus, make this debug() as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
[fix checkpatch warnings]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01 22:02:14 +01:00
Yangbo Lu
8ef0d5c438 armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb
This patch adds esdhc support for ls1043ardb.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-29 10:34:01 -07:00
Mugunthan V N
a9d6a7e23a drivers: mmc: omap_hsmmc: convert driver to adopt device driver model
adopt omap_hsmmc driver to device driver model

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22 14:43:57 -04:00
Roger Quadros
3b68939fa0 ARM: k2g: add SD card and eMMC support
Add MMC support for k2g

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-10-22 14:22:25 -04:00
Tom Rini
e8d124fae0 Merge git://git.denx.de/u-boot-marvell 2015-10-20 21:59:40 -04:00
Stefan Roese
5b37212a3d mmc: mv_sdhci: Configure the SDHCI MBUS bridge windows
This driver did not yet configure the SDHCI MBUS bridge registers.
Without this and with CONFIG_MMC_SDMA enabled, mmc hangs at random
times. As DMA cannot complete correctly.

Tested on db-88f6820-gp eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Dirk Eibach <eibach@gdsys.cc>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
2015-10-21 02:25:02 +02:00
Maxime Ripard
44c798799f sunxi: Use Kconfig CONFIG_MMC
Not all sunxi boards have an MMC embedded. Switching to the Kconfig option
will allow to enable or disable the support in each boards' defconfig.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Maxime Ripard
7a777f6d6f mmc: Add generic Kconfig option
Add a generic Kconfig option for the CONFIG_MMC option that was used before
in the configuration headers.

Since all the architectures need to be converted to that first, depend on
an non-existent config option that will be extended with architectures that
use that option.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-10-20 22:48:28 +02:00
Tobias Jakobi
2308ea7c6f exynos: more debug and cleanup in do_sdhci_init()
Add more debug printfs in do_sdhci_init() for calls
that can potentially fail.

Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13 20:22:28 +09:00
Tobias Jakobi
995a54cc12 exynos: be more verbose in process_nodes()
In case sdhci_get_config() or do_sdhci_init() fail, show
the error code that was returned.

Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13 20:22:28 +09:00
Tobias Jakobi
6a9fbb6e20 exynos: Fix passing of errors in exynos_mmc_init()
exynos_mmc_init() always returns zero, so for the caller
it looks like it never fails.

Correct this by returning the error code of process_nodes().
For process_nodes() do something similar and return early
when do_sdhci_init() fails.

v2: Only fail in process_nodes() if we fail on all
    available nodes.

Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13 20:22:28 +09:00
Tobias Jakobi
1a9d1731f9 exynos: Properly zero initialize host in s5p_sdhci_init()
This makes sure that setting the host_caps in s5p_sdhci_core_init()
doesn't operate on potentially uninitialized memory.

Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-13 20:22:28 +09:00
Hans de Goede
be90974c43 sunxi: mmc: Fix clk-delay settings
In recent allwinner kernel sources the mmc/sdio clk-delay settings have
been slightly tweaked, and for sun9i they are completely different then
what we are using.

This commit brings us in sync with what allwinner does, fixing problems
accessing sdcards on some A33 devices (and likely others).

For pre sun9i hardware this makes the following changes:
-At 400Khz change the sample delay from 7 to 0 (first introduced in A31 sdk)
-At 50 Mhz change the sample delay from 5 to 4 (first introduced in A23 sdk)
-Above 50 MHz change the out delay from 2 to 1 (first introduced in A20 sdk)

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-29 11:50:07 +02:00
Łukasz Majewski
4d58e10e3e mmc: dw_mmc: Increase timeout to 4 minutes (as in Linux kernel)
The commit: d9dbb97be0
"mmc: dw_mmc: Zap endless timeout" removed endless loop waiting for end
of dw mmc transfer.

For some workloads - dfu test @ Odroid XU3 (sending 8MiB file) -
and SD cards (e.g. MicroSD Kingston 4GiB, Adata 4GiB)
the default timeout is to short.

The new value - 4 minutes (240 seconds) - is the same as the one used in
Linux kernel driver. Such fix should be good enough until we come up
with better fix for this issue.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@konsulko.com>
Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-09-28 11:03:56 -04:00
Simon Glass
cf92e05c01 Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header
Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 17:15:20 -04:00
Marek Vasut
129adf5bf4 mmc: dw_mmc: Probe the MMC from OF
Rework the driver to probe the MMC controller from Device Tree
and make it mandatory. There is no longer support for probing
from the ancient qts-generated header files.

This patch now also removes previous temporary workaround.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@konsulko.com>
2015-09-04 11:54:20 +02:00
Sjoerd Simons
8e3332e223 mmc: Probe DM based mmc devices in u-boot
During mmc initialize probe all devices with the MMC Uclass if build
with CONFIG_DM_MMC

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:24 -06:00
Simon Glass
a8cb4fb56a rockchip: Add an MMC driver
Add an MMC driver which supports RK3288, but may also support other SoCs.
It uses the Designware MMC device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:24 -06:00
Simon Glass
e3563f2ec7 mmc: Support bypass mode with the get_mmc_clk() method
Some SoCs want to adjust the input clock to the DWMMC block as a way of
controlling the MMC bus clock. Update the get_mmc_clk() method to support
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-09-02 21:28:23 -06:00
Yousong Zhou
28f69b9a22 sunxi: mmc: set transfer timeout according to byte_cnt.
Originally a timeout value of 2 seconds was used regardless of the size
of data to be transfered.  This prevented slow devices from working
correctly while there was no much gain for faster devices, e.g. it takes
3708ms for a transfer of uImage of size 1899008 bytes.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-31 08:43:42 +02:00
Marcel Ziswiler
54a5cf81c4 arm: pxa: mmc: clean-up include file order
Cleaning up order of include files by sorting them alphabetically
keeping in mind to leave common.h on top.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-08-24 20:30:37 +02:00
Masahiro Yamada
0f9258228e of: clean up OF_CONTROL ifdef conditionals
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL.  We have cleansing
devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear
away the ugly logic in include/fdtdec.h:

 #ifdef CONFIG_OF_CONTROL
 # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL)
 #  define OF_CONTROL 0
 # else
 #  define OF_CONTROL 1
 # endif
 #else
 # define OF_CONTROL 0
 #endif

Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute.  It refers to
CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for
SPL.

Also, we no longer have to cancel CONFIG_OF_CONTROL in
include/config_uncmd_spl.h and scripts/Makefile.spl.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-18 13:46:05 -04:00
Tom Rini
0741701acf Merge branch 'master' of git://git.denx.de/u-boot-mmc 2015-08-13 07:20:44 -04:00
Yoshinori Sato
6f67b69b15 mmc_spi: Big-endian support
Currently implement always swap for big-endian value.
So doesn't work big-endian environment.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-08-13 11:24:26 +03:00
Simon Glass
760177dff4 dw_mmc: Calculate dwmmc FIFO threshold size if not provided
We can calculate this. Add code to do this if it is not provided.

panto: prefix changed to dw_mmc to make things easier to grep

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-13 11:24:26 +03:00
Nikita Kiryanov
9fbdca6056 mmc: omap_hsmmc: enable 8bit interface for eMMC for AM43xx
Enable 8bit interface on HSMMC2 for am43xx to support 8bit eMMC chips.

Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-08-12 20:48:04 -04:00
Nikita Kiryanov
dce55b934d mmc: omap_hsmmc: enable proper CMD(DAT) lines reset procedure for am43xx
The CMD(DAT) lines reset procedure described in the OMAP4(AM335x,
OMAP5, DRA7xx) TRMs is also necessary for AM43XX. Enable it in the
driver.

Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2015-08-12 20:48:04 -04:00
Peter Griffin
447da58b57 mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.
This patch adds the glue code for hi6220 SoC which has 2x synopsis
dw_mmc controllers. This will be used by the hikey board support
in subsequent patches.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-12 20:48:01 -04:00
Simon Glass
1c87ffe8d1 mmc: dw_mmc: Avoid using printf() for errors
The dw_mmc driver uses printf() in various places.

These bloat the code and cause problems for SPL. Use debug() where possible
and try to return a useful error code instead.

panto: Small rework to make it apply against top of tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-11 21:52:43 +03:00
Marek Vasut
9042d974d2 mmc: dw_mmc: Improve handling of data transfer failure
In case the data transfer failure happens, instead of returning
immediatelly, make sure the DMA is disabled, status register is
cleared and the bounce buffer is stopped.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@konsulko.com>
2015-08-11 20:44:30 +03:00
Marek Vasut
d9dbb97be0 mmc: dw_mmc: Zap endless timeout
Endless timeouts are bad, since if we get stuck in one, we have no
way out. Zap this one by implementing proper timeout.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@konsulko.com>
2015-08-11 20:44:21 +03:00
Marek Vasut
603b2f3a74 mmc: dw_mmc: Stop bounce buffer even in case of failure
The driver didn't stop the bounce buffer in case a data transfer
failed. This would lead to memory leakage if the communication
between the CPU and the card is unreliable. Add the missing call
to stop the bounce buffer.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@konsulko.com>
2015-08-11 20:43:34 +03:00
Simon Glass
c95ed7d9e7 exynos: Correct return value in exynos_mmc_init()
This function should return 0 on success, not 1. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:14 -06:00
Tom Rini
e3d50d4292 fsl_esdhc.c: Always make check_and_invalidate_dcache_range available
This function is called from esdhc_send_cmd so we need it available to
everyone.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-02 10:27:52 -04:00
Tom Rini
7a1af7a79b Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-08-02 07:40:37 -04:00
Tom Warren
7aaa5a60ce ARM: Tegra210: Add support to common Tegra source/config files
Derived from Tegra124, modified as appropriate during T210
board bringup. Cleaned up debug statements to conserve
string space, too. This also adds misc 64-bit changes
from Thierry Reding/Stephen Warren.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-07-28 10:30:20 -07:00
Thierry Reding
c39e2a75fd mmc: tegra: Build warning fixes for 64-bit
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-27 15:54:02 -07:00
Peng Fan
4683b22065 mmc:fsl_esdhc invalidate dcache before read
DCIMVAC is upgraded to DCCIMVAC for the individual processor
(Cortex-A7) that the DCIMVAC is executed on.

We should follow the linux dma follow. Before DMA read, first
invalidate dcache then after DMA read, invalidate dcache again.

With the DMA direction DMA_FROM_DEVICE, the dcache need be
invalidated again after the DMA completion. The reason is
that we need explicity make sure the dcache been invalidated
thus to get the DMA'ed memory correctly from the physical memory.
Any cache-line fill during the DMA operations such as the
pre-fetching can cause the DMA coherency issue, thus CPU get the stale data.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-07-26 12:17:20 +02:00
Daniel Kochmański
645c48f50e sunxi: Create helper function veryfing valid boot signature on MMC
This patch extracts checking for valid SD card "eGON.BT0" signature from
`board_mmc_init` into function `sunxi_mmc_has_egon_boot_signature`.

Buffer for mmc sector is allocated and freed at runtime. `panic` is
triggered on malloc failure.

Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu>
CC: Roy Spliet <r.spliet@ultimaker.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
[hdegoede@redhat.com: Small bugfix to make it work for devs other then mmc0]
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24 16:17:08 +02:00
Daniel Kochmański
1b26bab12e mmc: Protect mmc_initialize from initialising mmc multiple times
`mmc_initialize` might be called multiple times leading to the mmc-controllers
being initialised twice, and initialising the `mmc_devices` list head twice
which may lead to memory leaks.

Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu>
CC: Roy Spliet <r.spliet@ultimaker.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
CC: Pantelis Antoniou <panto@antoniou-consulting.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-24 16:17:08 +02:00
Simon Glass
8e6cc46178 dm: test: Add a test for the mmc uclass
Add a test to confirm that we can probe this device. Since there is no
MMC stack support in sandbox at present, this is as far as the test goes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
1169299135 mmc: Add debug() output on read errors
Allow read errors to be diagnosed more easily.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:25 -06:00
Simon Glass
e7ecf7cb5a dm: mmc: Add an MMC uclass
Add basic support for MMC, providing a uclass which can set up an MMC
device. This allows MMC drivers to move to using driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:25 -06:00
Stefan Roese
492d3223b0 mmc: sdhci.c: Add config option to use a fixed buffer for transfers
While implementing SDIO/MMC SPL booting for the Marvell Armada 38x, the
following problem occured. The SPL runs in internal SRAM which is
the L2 cache locked to memory. When the MMC buffers now are located
on the stack (or bss), the SDIO controller (SDHCI) can't write into
this L2 cache memory.

This patch introduces a method to use a fixed buffer that will be
used for all transfers by defining CONFIG_FIXED_SDHCI_ALIGNED_BUFFER.
This way, the board can use this buffer address located in SDRAM
for all transfers. This solves this SPL problem on the A38x and
should only be used in the SPL U-Boot version.

Tested for SPL booting on Marvell Armada 38x DB-88F6820-GP board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:05 +02:00
Stefan Roese
29905a451b mmc: sdhci: Use timer based timeout detection in sdhci_send_command()
The loop counter based timeout detection does not work on the Armada
38x based board (DB-88F6820-GP). At least with dcache enabled a
timeout is detected. Without dcache enabled, the timeout does not
occur. Increasing the loop counter solves this issue. But a better
solution is to use a timer based timeout detection instead. This
patch now implements this timer based detection.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:00 +02:00
Marek Vasut
9f1b4456c9 mmc: bcm2835_sdhci: Restore original delay behavior
Patch 33fe2fb8df titled
"mmc: bcm283x: Remove get_timer_us() from mmc driver"
incorrectly replaced ad-hoc get_timer_us() function
with a plain get_timer(). The get_timer() operates in
mSec units instead of uSec though, which caused very
slow operation of the driver.

Restore the original behavior of the driver, but avoid
get_timer_us() and use timer_get_us() instead. The later
is part of the standard API.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jakub Kiciński <moorray3@wp.pl>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Jakub Kicinski <kubakici@wp.pl>
2015-06-25 17:04:37 -04:00
Tom Rini
180f87fcc5 mmc_write.c: Make mmc_berase do 32bit safe 64bit math
We want to see if the requested start or total block count are
unaligned.  We discard the whole numbers and only care about the
remainder.  Update the code to use div_u64_rem here and add a comment.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Bernhard Nortmann <bernhard.nortmann@web.de>
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Bernhard Nortmann <bernhard.nortmann@web.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2015-06-18 16:11:41 -04:00
Hans de Goede
1c09fa38e0 sunxi: mmc: Enable pull-up on card-detect gpio pin
On some boards we need to enable the internal pull-up te reliable detect
that no card is inserted.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-06-04 14:08:28 +02:00
Tom Rini
d81572c272 Merge git://git.denx.de/u-boot-mpc85xx 2015-05-05 14:57:23 -04:00
Tom Rini
ff7e9cfc33 Merge branch 'master' of git://git.denx.de/u-boot-mmc 2015-05-05 07:00:38 -04:00
Marek Vasut
33fe2fb8df ARM: mmc: bcm283x: Remove get_timer_us() from mmc driver
The get_timer_us() function is something which is no longer
existing in case we use generic timer framework, so replace
it with get_timer().

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tyler Baker <tyler.baker@linaro.org>
2015-05-05 12:29:42 +03:00
Simon Glass
707ac1ad17 tegra: mmc: Set the removable flag correctly
If the mmc device is non-removable (as indicated by the device tree), set
the flag so that users of the device know.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05 12:29:42 +03:00
Alexander Stein
ebe78bb993 mmc: bcm2835_sdhci: Use calloc to allocate bcm2835_sdhci_host
We need to clear the allocated memory explicitly as the included
struct sdhci_host has function pointers. Those are compared to NULL to
test if this (optional) feature is supported. Leaving them undefined let
u-boot jump to arbitrary memory.

Signed-off-by: Alexander Stein <alexanders83@web.de>
2015-05-05 12:29:42 +03:00
Yangbo Lu
253d5bdd64 mmc: fsl_esdhc: update eMMC44 adapter card erase timeout
Freescale eMMC44 adapter card uses Micron N2M400FDB311A3CF eMMC
memory. According to the silicon datasheet, secure erase timeout
is 600ms. So increase erase timeout value from 250ms to 600ms.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Cc: York Sun <yorksun@freescale.com>
2015-05-05 12:29:42 +03:00
Kevin Liu
5e1c23cd39 mmc: sdhci: add timeout setting for response busy command
Timeout interrupt also work for response busy command(R1b) like
cmd38/cmd6. So need to set it accordingly. Current code only
set timeout for data command.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-05-05 12:29:42 +03:00
Rob Herring
5a20397b00 mmc: remove the MMC_MODE_HC flag
High capacity support is not a host capability, but a device capability
that is queried via the OCR. The flag in the operating conditions
request argument can just be set unconditionally. This matches the Linux
implementation.

[panto] Hand merged and renumbering MMC_MODE_DDR_52MHz.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2015-05-05 12:29:36 +03:00
Andrew Gabbasov
bd47c13583 mmc: Fix splitting device initialization
Starting part of device initialization sets the init_in_progress flag
only if the MMC card did not yet come to ready state and needs to continue
polling. If the card is SD or if the MMC card became ready quickly,
the flag is not set and (if using pre-initialization) the starting
phase will be re-executed from mmc_init function.

Set the init_in_progress flag in all non-error cases. Also, move flags
setting statements around so that the flags are not set in error paths.
Also, IN_PROGRESS return status becomes unnecessary, so get rid of it.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05 11:55:46 +03:00
Andrew Gabbasov
1677eef459 mmc: Restructure polling loops to avoid extra delays
The polling loops in sd_send_op_cond and mmc_complete_op_cond functions
check the ready flag state at the end of the loop, that is after executing
a delay inside the loop, which, in case of exiting with no error,
is not needed. Also, one of these loops, as well as the loop
in mmc_send_status, have the delay just before exiting on timeout
conditions.

Restructure all these loops to check the respective conditions before making
a delay for the next loop pass, and to appropriately exit without the delay.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05 11:55:00 +03:00
Andrew Gabbasov
cc17c01f2d mmc: Continue polling MMC card for OCR only if it is still not ready
Some MMC cards come to ready state quite quickly, so that the respective
flag appears to be set in mmc_send_op_cond already. In this case trying
to continue polling the card with CMD1 in mmc_complete_op_cond is incorrect
and may lead to unpredictable results. So check the flag before polling
and skip it appropriately.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05 11:54:40 +03:00
Andrew Gabbasov
5289b5350b mmc: Do not pass external mmc_cmd structure to mmc_send_op_cond_iter()
The previous change to use 'ocr' structure field for storing send_op_cond
command response also stopped using command response directly
outside of mmc_send_op_cond_iter(). Now it becomes possible to use
command structure in mmc_send_op_cond_iter() locally, removing a necessity
to pass it as an argument from the caller.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05 11:54:09 +03:00
Andrew Gabbasov
a626c8d418 mmc: Avoid extra duplicate entry in mmc device structure
The 'op_cond_response' field in mmc structure contains the response
from the last SEND_OP_COND MMC command while making iterational
polling of the card. Later it is copied to 'ocr' field, designed
to contain the OCR register value, which is actually the same
response from the same command. So, these fields have actually
the same data, just in different time periods. It's easier to use
the same 'ocr' field in both cases at once, without temporary using
of the 'op_cond_response' field.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05 11:53:52 +03:00
Yangbo Lu
2d9ca2c72c mmc: fsl_esdhc: Add peripheral clock support
The SD clock could be generated by platform clock or peripheral
clock for some platforms. This patch adds peripheral clock
support for T1024/T1040/T2080. To enable it, define
CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:25:39 -07:00
Yangbo Lu
5a8dbdc6b4 mmc: fsl_esdhc: Add adapter card type identification support
Add adapter card type identification support by reading
FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function,
define CONFIG_FSL_ESDHC_ADAPTER_IDENT.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
[York Sun: resolve conflicts in README.fsl-esdhc]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:25:19 -07:00
Hans de Goede
90641f82f1 sunxi: mmc: Fix card-detect gpio handling to work with the driver-model
The driver-model gpio functions may return another value then -1 as error,
make the sunxi mmc code properly handle this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04 16:51:52 +02:00
Hans de Goede
44d8ae5b69 sunxi: Introduce a hidden SUNXI_GEN_SUNxI Kconfig bool
sun6i and newer (derived) SoCs such as the sun8i-a23, sun8i-a33 and sun9i
have a various things in common, like having separate ahb reset control
registers, the SID living inside the pmic, custom pmic busses, new style
watchdog, etc.

This commit introduces a new hidden SUNXI_GEN_SUN6I Kconfig bool which can be
used to check for these features avoiding the need for an ever growing list
of "#if defined CONFIG_MACH_SUN?I" conditionals as we add support for more
"new style" sunxi SoCs.

Note that this commit changes the behavior of the gmac and hdmi code for
sun8i and the upcoming sun9i devices. This does not matter as sun8i does
not have gmac nor hdmi, and sun9i has new hardware-blocks for these so
the old code will not work there.

Also this is intentional as if a sun8i / sun9i variant which does use the
old hwblocks shows up then the GEN_SUN6I code paths will be the right ones
to use.

For completeness this also adds a SUNXI_GEN_SUN4I bool for A10/A13/A20.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-04 16:51:51 +02:00
Siva Durga Prasad Paladugu
eddabd1662 zynqmp: sdhci: Remove the quirk SDHCI_QUIRK_NO_CD
Remove the quirk SDHCI_QUIRK_NO_CD as it is not
required.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:03 +02:00
Yangbo Lu
8b06460e55 ls2085a: esdhc: Add esdhc support for ls2085a
This patch adds esdhc support for ls2085a.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23 16:46:51 -07:00
Masahiro Yamada
d6c418e4b8 ARM: bcm283x: move SoC headers to mach-bcm283x/include/mach
Move arch/arm/include/asm/arch-bcm283x/*
  -> arch/arm/mach-bcm283x/include/mach/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-03-28 09:03:09 -04:00
Rob Herring
3a48944bc9 mv_sdhci: fix warnings on 64-bit builds
Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-03-18 09:56:17 +02:00
Rob Herring
3c1fcb770b sdhci: fix warnings on 64-bit builds
Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-03-18 09:55:59 +02:00
Matt Reimer
e113fe3c06 mmc: sdhci: don't clobber adjacent registers
SDHCI_HOST_CONTROL is a byte-sized register, so don't write to it
as if it were a long, as that would result in clobbering the three
registers following.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
2015-03-18 09:53:01 +02:00
Matt Reimer
8ebde4f0b3 mmc: s5p: properly mask SELBASECLK
Properly mask SELBASECLK by using an actual mask rather than the
number of bits to shift in order to create the mask.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-03-18 09:51:56 +02:00
Peng Fan
323aaaa1e3 mmc: fsl_esdhc fix register offset
Commit f022d36e8a introduces
error register offset.

Change the "char reserved3[59]" to "char reserved3[56]".

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-03-17 09:09:47 -04:00
Stefano Babic
b9cb64825b Merge branch 'master' of git://git.denx.de/u-boot 2015-03-02 09:42:53 +01:00
Volodymyr Riazantsev
0e1bf614d5 mmc: fsl_esdhc: Add support for DDR mode
Add support of the DDR mode for eSDHC driver.
Enable it for i.MX6 SoC family only.

Signed-off-by: Volodymyr Riazantsev <volodymyr.riazantsev@globallogic.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-24 13:11:10 -08:00
Matt Reimer
f88a429f11 mmc: sdhci: fix bus width switching on Samsung SoCs
Fix bus width switching from 8-bit mode down to 4-bit or 1-bit modes on
Samsung SoCs using SDHCI_QUIRK_USE_WIDE8.  These SoCs report controller
version 2.0 yet they support 8-bit bus widths.  If 8-bit mode was
previously enabled and then an operation like "mmc dev" caused a switch
back down to 4-bit or 1-bit mode, WIDE8 was left set, causing failures.

This problem was manifested by "mmc dev" timing out.

Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
2015-02-23 19:52:00 +02:00
Przemyslaw Marczak
34dd928492 mmc: print SD/eMMC type for inited mmc devices
Depending on the boot priority, the eMMC/SD cards,
can be initialized with the same numbers for each boot.

To be sure which mmc device is SD and which is eMMC,
this info is printed by 'mmc list' command, when
the init is done.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-02-23 19:49:49 +02:00
Przemyslaw Marczak
64029f7aee mmc: exynos dwmmc: check boot mode before init dwmmc
Before this commit, the mmc devices were always registered
in the same order. So dwmmc channel 0 was registered as mmc 0,
channel 1 as mmc 1, etc.
In case of possibility to boot from more then one device,
the CONFIG_SYS_MMC_ENV_DEV should always point to right mmc device.

This can be achieved by init boot device as first, so it will be
always registered as mmc 0. Thanks to this, the 'saveenv' command
will work fine for all mmc boot devices.

Exynos based boards usually uses mmc host channels configuration:
- 0, or 0+1 for 8 bit  - as a default boot device (usually eMMC)
- 2 for 4bit - as an optional boot device (usually SD card slot)

And usually the boot order is defined by OM pin configuration,
which can be changed in a few ways, eg.
- Odroid U3     - eMMC card insertion -> first boot from eMMC
- Odroid X2/XU3 - boot priority jumper

By this commit, Exynos dwmmc driver will check the OM pin configuration,
and then try to init the boot device and register it as mmc 0.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Akshay Saraswat <akshay.s@samsung.com>
2015-02-23 19:49:22 +02:00
Hans de Goede
1f3e877def sunxi: mmc: Always declare High Capacity capability
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this
capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13
tablet, so always set it thereby fixing this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-02-23 19:46:13 +02:00
Jaehoon Chung
5dab81cea5 mmc: exynos_dw_mmc: use the exynos specific data structure
Clksel value is exynos specific value.
It removed "clksel_val" into dwmci_host and created the
"dwmci_exynos_priv_data" structure for exynos specific data.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-02-23 19:39:51 +02:00
Jaehoon Chung
3a33bb1874 mmc: exynos_dw_mmc: set to clksel_val into board-init function
"clksel_val" is assigned to property of mmc or defined value.
But it doesn't write at initial sequence.
There is a reason that get the wrong source-clock value.
This patch fixed it.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-02-23 19:36:55 +02:00
Jaehoon Chung
afc9e2b509 mmc: dw_mmc: fixed the wrong bit control
If mode is not DDR-mode, then it needs to clear it.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-02-23 19:35:13 +02:00
Otavio Salvador
ee0c538951 mmc: fsl_esdhc: Add support to force VSELECT set
Some boards cannot do voltage negotiation but need to set the VSELECT
bit forcely to ensure it to work at 1.8V.

This commit adds CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT flag for this use.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-02-23 09:11:42 +01:00
Otavio Salvador
f022d36e8a mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
This adds support to switch to 1.8V in case CMD11 succeeds.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-02-23 09:11:42 +01:00
Simon Glass
91785f70b9 x86: mmc: Move common FSP functions into a common file
Since these board functions seem to be the same for all boards which use
FSP, move them into a common file. We can adjust this later if future FSPs
need more flexibility.

This creates a generic PCI MMC device.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-06 12:07:36 -07:00
Tom Rini
37ffffb98d Merge branch 'master' of git://git.denx.de/u-boot-ti 2015-02-02 12:37:34 -05:00
Tom Rini
be8ddad9c8 Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2015-02-02 10:11:44 -05:00
Siarhei Siamashka
5abdb156bb sunxi: mmc: Add 'sunxi_' prefix to the static functions
This results in a much more readable callgraph, because now they
can't be confused with the function having exactly the same name
in the generic mmc code.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-02-02 14:04:28 +01:00
Simon Glass
0347960b87 dm: mmc: Remove use of fdtdec GPIO support
These functions are going away, so use the new uclass support instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:52 -07:00
Albert ARIBAUD \(3ADEV\)
5bfdd1fc97 omap3: mmc: add 1.8v bias setting for MMC1
Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-01-29 12:00:50 -05:00
Tom Rini
3b95288a2a Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-01-23 10:22:29 -05:00
Hans de Goede
daf22636c2 sunxi: mmc: Add support for sun9i (A80)
The clocks on the A80 are hooked up slightly different, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-01-22 12:34:55 +01:00
Hans de Goede
5b8d7fb4fe sunxi: mmc: Use a realistic timeout when sending a mmc command
Wait 1 second for the sdcard to respond, rather then waiting for
0xfffff milliseconds.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-01-22 12:34:55 +01:00
Michal Simek
38cd2d9c9b mmc: zynq: Use phys_addr_t for addresses
phys_addr_t is designed for physical addresses that's why
use it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-21 10:30:43 +01:00
Andrew Gabbasov
fc5b32fbf3 mmc: Skip changing bus width for MMC cards earlier than version 4.0
Wider bus widths (larger than default 1 bit) appeared in MMC standard
version 4.0. So, for MMC cards of any earlier version trying to change
the bus width (including ext_csd comparison) does not make any sense.
It may work incorrectly and at least cause unnecessary timeouts.
So, just skip the entire bus width related activity for earlier versions.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-01-19 17:41:52 +02:00
Andrew Gabbasov
bf4770731c mmc: Avoid redundant switching to 1-bit bus width for MMC cards
If all the commands switching an MMC card to 4- or 8-bit bus width fail,
and the bus width for the controller and the driver is still set
to default 1 bit, there is no need to send one more command to switch
the card to 1-bit bus width. Also, if the card or host controller do not
support wider bus widths, there is no need to send a switch command at all.

However, if one of switch commands succeeds, but the subsequent ext_csd
fields comparison fails, the card should be switched to some other bus width
(next in the list for the loop), or to default 1-bit bus width as a last
resort. That's why it would be incorrect to just remove the 1-bit bus width
case from the list, it should still be processed in some cases.

panto: Minor cosmetic edit removing superfluous parentheses.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2015-01-19 17:41:52 +02:00
Diego Santa Cruz
9e41a00b57 mmc: extend mmcinfo output to show partition write reliability settings
This extends the mmcinfo hardware partition info output to show
partitions with write reliability enabled with the "WRREL" string.
If the partition does not have write reliability enabled the "WRREL"
string is omitted; this is analogous to the ehhanced attribute.

Example output:

Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
Erase Group Size: 8 MiB
HC WP Group Size: 16 MiB
User Capacity: 13.8 GiB ENH WRREL
User Enhanced Start: 0 Bytes
User Enhanced Size: 512 MiB
Boot Capacity: 16 MiB ENH
RPMB Capacity: 128 KiB ENH
GP1 Capacity: 64 MiB ENH WRREL
GP2 Capacity: 64 MiB ENH WRREL

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:41:51 +02:00
Diego Santa Cruz
8dda5b0e60 mmc: extend the mmc hardware partitioning API with write reliability
The eMMC partition write reliability settings are to be set while
partitioning a device, as per the eMMC spec, so changes to these
attributes needs to be done in the hardware partitioning API.
This commit adds such support.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:41:51 +02:00
Diego Santa Cruz
ac9da0e08c mmc: add API to do eMMC hardware partitioning
This adds an API to do hardware partitioning on eMMC devices. The
new mmc_hwpart_config() function does the partitioning in one go.
As the different attributes and partitioning options on eMMC may
be interdependent validation has to be done based on the complete
partitioning configuration. The function accepts three modes:

- MMC_HWPART_CONF_CHECK: just validates that the configuration
  is valid.
- MMC_HWPART_CONF_SET: validates and sets all the fields in
  EXT_CSD but without setting the "partitioning completed" bit,
  and thus is reversible.
- MMC_HWPART_CONF_COMPLETE: does everything and is thus not
  reversible.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:41:45 +02:00
Diego Santa Cruz
9cf199ebcf mmc: the ext_csd data may be used during init even if reading failed
The mmc_startup() function uses the ext_csd data even if reading it
from the mmc device failed. This bug was introduced in commit
bc897b1d4d. We now bail out if
reading it fails, this should not be a problem as ext_csd was
introduced in MMC 4.0 and this code is conditional on MMC >= 4.0.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:04:48 +02:00
Diego Santa Cruz
8a0cf49010 mmc: eMMC partitioning data is not effective till partitioning completed
The eMMC spec says that partitioning is only effective after the
PARTITION_SETTING_COMPLETED is set in EXT_CSD (and a power cycle was done,
but that we cannot know). Thus the partition sizes and attributes should
be ignored when that bit is not set, otherwise the various capacities
are not coherent (e.g., the user data capacity will be that of the
unpartitioned device while partition sizes would be non-zero).

Prescence of non-zero partitioning data is nevertheless still used to
activate the high-capacity size definitions (EXT_CSD_ERASE_GROUP_DEF)
as it is necessary to set that to write any of the partitioning fields
in EXT_CSD, so having partitioning data means someone previously
activated that and we should keep it activated.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:04:48 +02:00
Diego Santa Cruz
037dc0ab5d mmc: read the high capacity WP group size for eMMC
Read the eMMC high capacity write protect group size at mmc device
initialization. This is useful to correctly partition an eMMC device,
as partitions need to be aligned to this size.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:02:29 +02:00
Diego Santa Cruz
a4ff9f83f5 mmc: fix erase_grp_size computation with high-capacity size definition
The erase_grp_size in struct mmc is to be a size in 512-byte sectors
but the code used to compute it for eMMC when EXT_CSD_ERASE_GROUP_DEF is
enabled computed it as bytes, leading to erase sizes and alignment
much larger than what is actually required by the mmc device.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:02:29 +02:00
Diego Santa Cruz
a7f852b688 mmc: read the size of eMMC enhanced user data area
This modification reads the size of the eMMC enhanced user data area
upon initialization of an mmc device, it will be used later by
mmcinfo.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:02:29 +02:00
Diego Santa Cruz
f8e89d6716 mmc: computation of eMMC GP partition size was missing 512 KiB factor
Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:02:29 +02:00
Diego Santa Cruz
0c453bb76c mmc: incomplete test to switch to high-capacity group size definitions
The eMMC spec mandates that the high-capacity group size definitions
should be enabled when the device is partitioned (by setting
ERASE_GROUP_DEF in EXT_CSD). The current test to determine when this is
required misses a few cases. In particular a device may have been
partitioned without setting the enhanced attribute on any partition
or partitioning may be completed without creating any extra partitions.

This change moves the code to set ERASE_GROUP_DEF to after reading
all partition information. It is also enabled when
PARTITIONING_SETTING_COMPLETED is set as it is necessary to enable
ERASE_GROUP_DEF before setting that bit, so it means that the user
previously switched to the high capacity definitions.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:02:29 +02:00
Diego Santa Cruz
c3dbb4f9b7 mmc: extend mmcinfo to show enhanced partition attribute
This extends the mmcinfo command's output to show which eMMC partitions
have the enhanced attribute set. Note that the eMMC spec says that
if the enhanced attribute is supported then the boot and RPMB
partitions are of the enhanced type.

The output of mmcinfo becomes:
Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
User Capacity: 13.8 GiB ENH
Boot Capacity: 16 MiB ENH
RPMB Capacity: 128 KiB ENH
GP1 Capacity: 64 MiB ENH
GP2 Capacity: 64 MiB ENH

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
2015-01-19 17:01:34 +02:00
Nobuhiro Iwamatsu
72d42bad58 mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoC
This adds Renesas rmobile ARM SoC's SD/MMC host support.
This drivers tested with Gose board and Koelsch board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-19 16:24:25 +02:00
Axel Lin
b0c4ae1a51 mmc: sunxi: Fix misuse of gpio_direction_input()
It does not make sense to make gpio_direction_input() return the gpio input
status. The return value of gpio_direction_input() is inconsistent if
CONFIG_DM_GPIO is defined.
And we don't need to call gpio_direction_input() int sunxi_mmc_getcd().
Just init the gpio once in mmc_resource_init() is enough.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
2015-01-14 14:56:36 +01:00
Hans de Goede
fc3a832576 sunxi: mmc: Properly setup mod-clk and clock sampling phases
The sunxi mmc controller has both an internal clock divider, as well as
the divider in the mod0-clk for the mmc controller.

The internal divider cannot be used, as it conflicts with the setting of
clock sampling phases which is done in the mod0-clk, so it must be set to
0 (divide by 1).

For some reason while the kernel has had this correct from day one, the
u-boot sunxi mmc code has been using a fixed mod0-clk and setting its
internal divider depending on the desired speed. This is something which
we've inherited from the original Allwinner u-boot sources, but while this
has been fixed in Allwinner's own u-boot code at least for the A23 and later
upstream u-boot was still doing this wrong.

This commit fixes this, thereby also fixing mmc support not working reliable
on the A23 (which seems more sensitive to this) and possible also fixes some
other sunxi mmc issues.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-01-14 14:56:36 +01:00
Gerald Kerma
ac0b729844 MVEBUMMC : REMOVE unnecessary delay from init
Remove unnessecary delay from mvebu_mmc_initialize

Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06 10:10:28 +02:00
Gerald Kerma
02b2739e8f MVEBUMMC : CLEAN code
Clean mvebu_mmc_send_cmd

Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06 10:10:23 +02:00
Gerald Kerma
86eeecafc2 MVEBUMMC : REMOVE unnecessary delays
Remove delays in mvebu_mmc_set_bus and mvebu_mmc_set_clk

Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06 10:10:16 +02:00
Gerald Kerma
fc0f25f919 MVEBUMMC : FIX debug strings
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06 10:10:12 +02:00
Gerald Kerma
28d27b79e3 MVEBUMMC : Speed up access time
Get about 40x faster access on SHEEVAPLUG MMC
 Fix some SD type compatibility

 Changes in v3:
 - fix the HW_STATE (from linux mvsdio)
 - review delays and timeouts

 Changes in v2:
 - increase number of loops
 - remove initial delay

 Changes in v1:
 - review all loops, delays and timeouts

Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06 10:10:04 +02:00
Gerald Kerma
2591fbdba3 MVEBUMMC : Change copyright date
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-01-06 10:09:45 +02:00
Andrew Gabbasov
2b8a9692f9 mmc: dw_mmc: Use active DDR mode flag
The card_caps bit should denote the card capability to use DDR mode,
but we need the flag indicating that the DDR mode is active.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2014-12-12 21:09:01 +02:00
Andrew Gabbasov
5af8f45cd0 mmc: Fix block length for DDR mode
Block length for write and read commands is fixed to 512 bytes
when the card is in Dual Data Rate mode. If block length read from CSD
is different, make sure the driver will use correct length
in all further calculations and settings.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2014-12-12 21:08:38 +02:00
Andrew Gabbasov
201d5ac438 mmc: Fix Dual Data Rate capability recognition
Since the driver doesn't work in 1.2V or 1.8V signaling level modes,
Dual Data Rate mode can be supported by the driver only if it is supported
by the card in regular 3.3V mode. So, check for a particular single
bit in card type field.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2014-12-12 21:08:21 +02:00
Andrew Gabbasov
786e8f818c mmc: Fix handling of bus widths and DDR card capabilities
If the MMC_MODE_DDR_52MHz flag is set in card capabilities bitmask,
it is never cleared, even if switching to DDR mode fails, and if
the controller driver uses this flag to check the DDR mode, it can
take incorrect actions.

Also, DDR related checks in mmc_startup() incorrectly handle the case
when the host controller does not support some bus widths (e.g. can't
support 8 bits), since the host_caps is checked for DDR bit, but not
bus width bits.

This fix clearly separates using of card_caps bitmask, having there
the flags for the capabilities, that the card can support, and actual
operation mode, described outside of card_caps (i.e. bus_width and
ddr_mode fields in mmc structure). Separate host controller drivers
may need to be updated to use the actual flags. Respectively,
the capabilities checks in mmc_startup are made more correct and clear.

Also, some clean up is made with errors handling and code syntax layout.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2014-12-12 21:08:06 +02:00
Jaehoon Chung
dfcb683a31 mmc: exynos_dw-mmc: change debug message
To debug more exactly, add the index for device.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2014-12-12 20:35:30 +02:00
Markus Niebel
edab723b47 MMC: add MMC_VERSION_5_0
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2014-12-12 20:34:20 +02:00
Markus Niebel
d7b2912991 MMC: fix user capacity for partitioned eMMC card
if the card claims to be high capacity and the card
is partitioned the capacity shall still be read from
ext_csd SEC_COUNT even if the resulting capacity is
smaller than 2 GiB

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2014-12-12 20:28:04 +02:00
Lubomir Popov
e75eaf100b mmc: Cosmetic fix for nicer, aligned device list printout
If print_mmc_devices() was called with a '\n' separator (as done
for example by the "mmc list" command), it offset the 2-nd and
all subsequent lines by one space. Fixing this.

Signed-off-by: Lubomir Popov <l-popov@ti.com>
2014-12-12 20:08:47 +02:00
Tom Rini
98d2d5e8c4 Merge branch 'master' of git://git.denx.de/u-boot-ti 2014-12-08 16:35:06 -05:00
Paul Kocialkowski
aac5450ea9 omap_hsmmc: Board-specific TWL4030 MMC power initializations
Boards using the TWL4030 regulator may not all use the LDOs the same way
(e.g. MMC2 power can be controlled by another LDO than VMMC2).
This delegates TWL4030 MMC power initializations to board-specific functions,
that may still call twl4030_power_mmc_init for the default behavior.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Fix omap3_evm warning, add twl4030.h]
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-04 21:28:15 -05:00
Nobuhiro Iwamatsu
9675f61077 mmc: sh_mmcif: Add support rmobile
Renesas R-Mobile/R-Car ARM SoC of MMC has the same IP that are supported by
sh_mmcif. This adds support R-Mobile/R-Car ARM SoC with the setting of the
clock support.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-05 11:16:22 +09:00
Nobuhiro Iwamatsu
7a7eb983a4 mmc: sh_mmcif: Change maximum and minimum value of MMC clock
Maximum value and the minimum value of clock for sh_mmcif instead by
base of MMC clock. This removes fixed clock, make the changes to be calculated
according to environment.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-05 11:15:52 +09:00
Nobuhiro Iwamatsu
21ea350385 mmc: sh_mmcif: Use DIV_ROUND_UP and fls instead of calculation loop
Use DIV_ROUND_UP and fls to simplify the code.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-12-05 11:15:11 +09:00
Paul Kocialkowski
f3e85e4825 twl4030: device-index-specific MMC power initializations, common ramp-up delay
Not every device has multiple MMC slots available, so it makes sense to enable
only the required LDOs for the available slots. Generic code in omap_hsmmc will
enable both VMMC1 and VMMC2, in doubt.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
2014-12-04 11:04:40 -05:00
Paul Kocialkowski
95de9ab201 mmc: Board-specific MMC power initializations
Some devices may use non-standard combinations of regulators to power MMC:
this allows these devices to provide a board-specific MMC power init function
to set everything up in their own way.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
2014-12-04 11:04:40 -05:00
Felipe Balbi
d11ac4b56d arm: omap: add support for am57xx devices
just add a few ifdefs around because this
device is very similar to dra7xxx.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
2014-12-04 11:04:14 -05:00
Tom Rini
21008ad638 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Conflicts:
	drivers/mmc/fsl_esdhc.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-11-26 11:22:29 -05:00
Tom Rini
dee332ffb7 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2014-11-24 12:02:12 -05:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Ye.Li
a3d6e38617 mmc: fsl_esdhc: Update esdhc driver for iMX6SX
The reset value of "uSDHCx_INT_STATUS_EN" register is changed to 0
on iMX6SX. So the fsl_esdhc driver must update to set the register,
otherwise no state can be detected.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-11-20 10:44:42 +01:00
Markus Niebel
3b4b9a3377 mmc: fsl_esdhc: fix f_max retrieval during init
for multi instance API we use struct fsl_esdhc_cfg to
pass the clock rate. Do not set f_max from global data,
since this is wrong for multi instance case.

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-19 18:17:12 -08:00
Pavel Machek
389b89c70f sort drivers/mmc/Makefile
Sort drivers/mmc makefile, as requested by wd.

Signed-off-by: Pavel Machek <pavel@denx.de>
Acked-by: Chin Liang See <clsee@altera.com>
2014-11-07 16:27:04 -05:00
Igor Grinberg
0b03a931ab omap: hsmmc: assume cd gpio is active low
Switch the default CD GPIO polarity to active low.

The current hsmmc driver assumption that the CD GPIO is active high, but
in the real hardware, usually the opposite holds.
The usual SD card socket has a mechanical switch which is grounded as
soon as a card is inserted.
Of course there might be some board logic which inverts the signal, but
as far as current users are concerned, there is no such logic.

Current U-Boot users either not using the CD functionality, or have a
different way (e.g. external to SoC GPIO controller) for checking the
card presence.

This patch also brings the polarity assumption in line with the Linux
kernel and adds appropriate comments.

This patch also might spare issues once the TWL GPIO driver will be
converted to the DM.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Reviewed-by: Tom Rini <trini@ti.com>
2014-11-06 11:04:41 -05:00
Hans de Goede
967325feb2 dm: sunxi: Request card detect gpio
This is necessary for the device-model enabled builds to work properly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-11-05 13:10:13 +01:00
Ian Campbell
ed41e62f51 sunxi: Use CONFIG_MACH_SUN?I from Kconfig instead of CONFIG_SUN?I
Mostly automatic with:
    sed -i -e 's/CONFIG_\(SUN[45678]I\)/CONFIG_MACH_\1/g' $(git grep -l CONFIG_SUN[45678]I)
followed by removing the relevant #defines from include/configs/sun?i.h by
hand.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-05 13:09:58 +01:00
Przemyslaw Marczak
3f3c13a513 mmc: s5p: set SD detection pin as input
The SD Card slot detection pin should be configured as input.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27 19:20:51 -06:00
Tom Rini
d0796defbe Merge http://git.denx.de/u-boot-sunxi 2014-10-26 14:13:24 -04:00
Tom Rini
84a6df09c7 Merge git://git.denx.de/u-boot-dm
Fix a trivial conflict over adding <dm.h>

Conflicts:
	arch/arm/cpu/armv7/omap3/board.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-10-26 14:03:08 -04:00
Jeroen Hofstee
74321944e6 mmc: bcm2835_sdhci: add missing include
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 15:27:35 -04:00
Jeroen Hofstee
19d7bf3d86 tegra: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:27:37 -04:00
Jeroen Hofstee
6588c78bf3 sdhci: make local functions static
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25 07:02:02 -04:00