Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 23:24:38 +00:00
Code Issues Projects Releases Packages Wiki Activity

mmc: sdhci: Use timer based timeout detection in sdhci_send_command()

Browse source 
The loop counter based timeout detection does not work on the Armada
38x based board (DB-88F6820-GP). At least with dcache enabled a
timeout is detected. Without dcache enabled, the timeout does not
occur. Increasing the loop counter solves this issue. But a better
solution is to use a timer based timeout detection instead. This
patch now implements this timer based detection.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
This commit is contained in:
Stefan Roese 2015-06-29 14:58:08 +02:00 committed by Luka Perkov
parent fca6105200
commit 29905a451b
1 changed files with 5 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
drivers/mmc/sdhci.c
View file

@ -133,8 +133,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
int trans_bytes = 0, is_aligned = 1;
u32 mask, flags, mode;
unsigned int time = 0, start_addr = 0;
unsigned int retry = 10000;
int mmc_dev = mmc->block_dev.dev;
unsigned start = get_timer(0);
/* Timeout unit - ms */
static unsigned int cmd_timeout = CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT;
@ -222,15 +222,15 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
flush_cache(start_addr, trans_bytes);
#endif
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND);
start = get_timer(0);
do {
stat = sdhci_readl(host, SDHCI_INT_STATUS);
if (stat & SDHCI_INT_ERROR)
break;
if (--retry == 0)
break;
} while ((stat & mask) != mask);
} while (((stat & mask) != mask) &&
(get_timer(start) < CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT));
if (retry == 0) {
if (get_timer(start) >= CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT) {
if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
return 0;
else {