Commit graph

452 commits

Author SHA1 Message Date
Tom Rini
99e14d5249 - mxsfb DM_VIDEO conversion
- splash fix for DM_VIDEO configurations
 - meson HDMI fix for boards without hdmi-supply regulator
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXP4oqg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXLDlAJ422AAeTYTWf0wrfWz11YUWggd7HQCfcsY+UjgL
 SM69apyCTV0ZGo5uVzE=
 =bQQc
 -----END PGP SIGNATURE-----

Merge tag 'video-updates-for-2019.07-rc3' of git://git.denx.de/u-boot-video

- mxsfb DM_VIDEO conversion
- splash fix for DM_VIDEO configurations
- meson HDMI fix for boards without hdmi-supply regulator
2019-06-10 09:41:19 -04:00
Heinrich Schuchardt
219dee7e38 imx: move BOARD_SIZE_CHECK to main Makefile
We currently have duplicate definitions for BOARD_SIZE_CHECK in Makefile
and arch/arm/mach-imx/Makefile.

Move the board size check from arch/arm/mach-imx/Makefile to Makefile.

Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like an error
like the following is thrown:

u-boot-dtb.imx exceeds file size limit:
  limit:  503696 bytes
  actual: 509720 bytes
  excess: 6024 bytes
make: *** [Makefile:1051: u-boot-dtb.imx] Error 1

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-07 11:03:39 -04:00
Igor Opaniuk
8c1df09f07 video: mxsfb: add DM_VIDEO support
Extend the driver to build with DM_VIDEO enabled. DTS files
must additionally include 'u-boot,dm-pre-reloc' property in
soc and child nodes to enable driver binding to mxsfb device.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-04 23:25:54 +02:00
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Parthiban Nallathambi
d8d33b6d4d imx: Add variscite DART-6UL Evaluation Kit
Port for the DART-6UL Evaluation Kit SBC. Based on the variscite
DART-6UL iMX6ULL SoM.

CPU:   Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 43C
Reset cause: POR
Model: Variscite DART-6UL Evaluation Kit
Board: Variscite DART-6UL Evaluation Kit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial@02020000
Out:   serial@02020000
Err:   serial@02020000
Net:   FEC0

Working:
 - Eth0
 - i2c
 - MMC/SD
 - eMMC
 - USB host
 - UART 1

Note: LCDIF porting needs DM_VIDEO
https://lists.denx.de/pipermail/u-boot/2019-April/365506.html

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-04-25 19:16:24 +02:00
Peng Fan
702339bdf4 imx: i.MX8MQ: clear ocotp error bit
In case ocotp error bit is set, clear it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 19:16:24 +02:00
Peng Fan
7a0c9b0888 imx: add lowlevel init for ARM64
Sometimes we met SERROR, but only to catch it when Linux boots up.
Let's enable catching in U-Boot to catch it ealier and ease debug.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 19:16:24 +02:00
Chris Packham
4eceb4bc8b ARM: imx: Fix typo in select option for ZMX25
Correct CPU_ARM926EJS1 to CPU_ARM926EJS.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:16:24 +02:00
Peng Fan
0d331c035a imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT

Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2

U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)

CPU:   NXP i.MX8QM RevB A53 at 142933 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot:  SD1
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Peng Fan
7f50af6090 imx8: add cpu support
Add cpu type and Kconfig entry

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
13e7b72f32 ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards
This commit enables the DM_USB on HSC|DDC i.MX53 based boards.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
81253ebba2 ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards
This commit enables DM_MMC and DM_BLK on imx53 based HSC and DDC boards.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Peng Fan
a87eb0405f imx: sip: add call_imx_sip_ret2
This function will be used by i.MX8 fuse driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 09:03:15 +02:00
Marcel Ziswiler
37822a6ca1 imx: bootaux: add dependency on vf610
Allow using bootaux also on VF610 aka Vybrid.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
57f065fee2 video: ipuv3: add DM_VIDEO support
Extend the driver to build with DM_VIDEO enabled. DTS files
must additionally include 'u-boot,dm-pre-reloc' property in
soc and ipu nodes to enable driver binding to ipu device.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Fabio Estevam
75cd09cb18 imx8qxp: Fix the reported CPU frequency
Currently the CPU frequency is incorrectly reported:

CPU:   NXP i.MX8QXP RevB A35 at 147228 MHz

Fix this problem by using a direct call to the SCU firmware to
retrieve the Cortex A35 CPU frequency.

With this change applied the CPU frequency is displayed correctly:

CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz

Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
737d8bd820 pico-imx6ul: Convert to DM MMC
Select CONFIG_DM_MMC=y in order to support MMC driver model.

This allows the MMC board related code to be removed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Max Krummenacher
6ed4d26c21 imx: cpu.c: give access to reset cause in spl
This makes get_imx_reset_cause() accessible in SPL, but keeps the SRSR
register content intact so that U-Boot proper can evaluated the
reset_cause again should this be needed.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-02-15 22:01:15 +01:00
Lukasz Majewski
dc619924c7 ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
This patch extends the vf610 DDR memory controller code to support SW
leveling.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2019-02-15 12:16:50 +01:00
Lukasz Majewski
548cc1095f ddr: vybrid: Provide code to perform on-boot calibration
This patch provides the code to calibrate the DDR's
DQS to DQ signals (RDLVL).

It is based on:
VFxxx Controller Reference Manual, Rev. 0, 10/2016, page 1600
10.1.6.16.4.1 "Software Read Leveling in MC Evaluation Mode"

and NXP's community thread:
"Vybrid: About DDR leveling feature on DDRMC."
https://community.nxp.com/thread/395323

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-02-15 12:16:50 +01:00
Tien Fong Chee
0c3a9ed409 spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-02-01 09:12:48 -05:00
Tom Rini
db4a29993d - ihs and imx driver fixes
- relax EDID validation checks for 0 hsync/vsync
   pulse width (support some quirky displays)
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXFLpkQ4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXLiRAJ9F4WRPFtzn/S77OinRZl2e5isCJACaA/t8hmx2
 M81piE8xdryxVKIHFJc=
 =ocAC
 -----END PGP SIGNATURE-----

Merge tag 'video-updates-for-2019.04-rc1' of git://git.denx.de/u-boot-video

- ihs and imx driver fixes
- relax EDID validation checks for 0 hsync/vsync
  pulse width (support some quirky displays)
2019-01-31 16:07:37 -05:00
Ye Li
3fd39937b1 imx: video: Fix return value issue
When framebuffer driver init is failed, we should return the err value not 0.
So the video init can exit immediately.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 21:13:33 +01:00
Peng Fan
9382f73bb0 imx8: cpu: restrict checking ROM passover info for revA
Passover info only for revA.

move get_cpu_rev out of CONFIG_CPU to avoid build failure when using
get_cpu_rev in SPL.
Add a CONFIG_SPL_BUILD for passover usage, no need to execute it again
in normal U-Boot stage. Also if still checking passover info in normal
U-Boot stage, need to make the passover code executed after
arch_cpu_init_dm.
So to make it easy and clean, only execute the code for SPL stage.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:55:46 +01:00
Ye Li
d8bbf362f3 imx: Check the PL310 version for applying errata
Apply errata based on PL310 version instead of compile
time. Also set Prefetch offset to 15, since it improves
memcpy performance by 35%. Don't enable Incr double
Linefill enable since it adversely affects memcpy
performance by about 32MB/s and reads by 90MB/s. Tested
with 4K to 16MB sized src and dst aligned buffer.

Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-28 20:55:46 +01:00
Ye Li
528915c717 imx: Fix potential lmb memory overwritten by stack
At default, u-boot reserves the memory from SP - 4KB to DRAM end for
lmb in arch_lmb_reserve. So lmb won't allocate any memory from it.
But we found the 4K gap for SP is not enough now, because some FDT
updating operations are added in our u-boot before jumping to kernel,
which needs larger stack. This causes the lmb allocated memory is overwritten
by stack.

Fix the issue by implementing the board_lmb_reserve to reserve from
SP - 16KB to memory end for lmb.

Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
caceb739ea imx: build flash.bin for i.MX8
Build flash.bin for i.MX8 when SPL enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
b184a796a0 imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
Introduce BL33_BASE_ADDR, then we could reuse this script for i.MX8QXP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
f541796af9 spl: imx8: add spl boot device
Add spl_boot_device for i.MX8, also add BOOT_DEVICE_MMC2_2 for
spl_boot_mode.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
c1e0940f7c arm: imx: build mach-imx for i.MX8
To enable SPL for i.MX8, we could reuse code in arch/arm/mach-imx.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
04b249656e imx8: scu: use dedicated MU for SPL
SPL runs in EL3 mode, except MU0_A, others are not powered on,
and could not be used. However normal U-Boot use MU1_A, so we
could not reuse the one in dts. And we could not replace the one
in dts with MU0_A, because MU0_A is reserved in secure world.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Peng Fan
3bd888b55e imx8qxp: add SUPPORT_SPL option
Enable SUPPORT_SPL option for i.MX8QXP, then we could enable SPL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 20:35:47 +01:00
Fabio Estevam
bab289cbe9 mx7: Do not call lcdif_power_down() in the SPL case
Like it was done on imx6 in commit 9236269de5 ("imx: mx6: Fix
implementantion reset_misc")

Do not call lcdif_power_down() in the SPL case to fix the following
build error:

  LD      spl/u-boot-spl
  MKIMAGE u-boot.img
arch/arm/mach-imx/built-in.o: In function `reset_misc':
/home/fabio/ossystems/u-boot/arch/arm/mach-imx/mx7/soc.c:372: undefined reference to `lcdif_power_down'
scripts/Makefile.spl:375: recipe for target 'spl/u-boot-spl' failed

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-28 12:53:21 +01:00
Martyn Welch
0963060c99 imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on
the PHYTEC phyCORE-i.MX6UL SOM (PCL063).

CPU:   Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 44C
Reset cause: POR
Board: PHYTEC phyCORE-i.MX6UL
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC0

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART (1 & 5)
 - USB (host & otg)

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
2019-01-28 12:47:27 +01:00
Breno Matheus Lima
b2ca8907d9 imx: hab: Convert non-NULL IVT DCD pointer warning to an error
The following NXP application notes and manual recommend to ensure the
IVT DCD pointer is Null prior to calling HAB API authenticate_image()
function:

- AN12263: HABv4 RVT Guidelines and Recommendations
- AN4581: Secure Boot on i.MX50, i.MX53, i.MX 6 and i.MX7 Series using
  HABv4
- CST docs: High Assurance Boot Version 4 Application Programming
  Interface Reference Manual

Commit ca89df7dd4 ("imx: hab: Convert DCD non-NULL error to warning")
converted DCD non-NULL error to warning due to the lack of documentation
at the time of first patch submission. We have warned U-Boot users since
v2018.03, and it makes sense now to follow the NXP recommendation to
ensure the IVT DCD pointer is Null.

DCD commands should only be present in the initial boot image loaded by
the SoC ROM. Starting in HAB v4.3.7 the HAB code  will generate an error
if a DCD pointer is present in an image being authenticated by calling the
HAB RVT API. Older versions of HAB will process and run DCD if it is
present, and this could lead to an incorrect authentication boot flow.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-01-28 12:45:45 +01:00
Tom Rini
7f9418688d Merge branch 'master' of git://git.denx.de/u-boot-usb 2019-01-11 10:47:41 -05:00
Jean-Jacques Hiblot
f811e9763f Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET
The SPL option for USB gadget should be named after the option for u-boot
(CONFIG_USB_GADGET)

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 18:52:55 +01:00
Fabio Estevam
d4a0c09892 imx8m: clock: Fix oscillator values
OSC_27M_CLK should return 27MHz and OSC_32K_CLK should return
32768Hz to reflect the reality.

This also keeps the values in sync with the Linux clock tree.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-09 17:10:30 +01:00
Peng Fan
da72574b21 imx8: cpu: correct info
The CPU banner printed is as following:
CPU:   CPU:   Freescale i.MX8QXP RevB A35 at 147228 MHz

1. Drop the CPU:
2. Change vendor from Freescale to NXP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-09 17:04:17 +01:00
Stefan Agner
81653478eb ARM: vf610: ddrmc: do not write CR79 by default
The current value CTLUPD_AREF(0) is the reset value of the register,
so there is no need to write a value. If needed, the register can be
written using board specific CR settings.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09 16:27:39 +01:00
Stefan Agner
52c2c97e7c ARM: vf610: ddrmc: fix initialization completion detection
The CR80 register has multiple interrupt bits, the code is supposed
to check bit 8 but instead uses a logical and. In most cases this
probably did not affect real operations since at that stage typically
none of the other bits are set.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-09 16:27:23 +01:00
Stefan Agner
a95d444055 ARM: vf610: ddrmc: program Dummy DDRBYTE1/2
The Vybrid reference manual VFXXXRM Rev. 0 10/2016 states in chapter
5.2.6.1 DUMMY PADS (DDR/QuadSPI) that those pads need to be programed
for correct operation of DDR. Assume the default DDR pin configuration
which seems to work well on a Colibri VF50.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-09 16:19:36 +01:00
Peng Fan
86ac7a9a5d imx: add i.MX8MQ EVK support
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
DRAM.

The boot log with Arm trusted firmware console enabled:
"
U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
PMIC:  PFUZE100 ID=0x10
Normal Boot
Trying to boot from MMC2
NOTICE:  Configureing TZASC380
NOTICE:  BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty
NOTICE:  BL31: Built : 09:28:54, Nov  8 2018
lpddr4 swffc start
NOTICE:  sip svc init

U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)

CPU:   Freescale i.MX8MQ rev2.0 at 1000 MHz
Reset cause: POR
Model: Freescale i.MX8MQ EVK
DRAM:  3 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@30be0000 using MAC address from ROM
eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-01 14:12:18 +01:00
Peng Fan
60afc5009b imx: imx8m: not build bootaux when building SPL
No need to build bootaux in SPL stage

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
94df988596 imx: imx8mq: build flash.bin
Build flash.bin for i.MX8MQ, it will include signed hdmi firmware,
spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb).
Burn it to 33KB offset of SD card.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
dfbc296a85 imx: imx8m: introduce imximage cfg file
imximage.cfg will be used to generate the flash.bin

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
a9eed6e1b8 imx: imx8m: introduce script to generate fit image
Introduce script to generate fit image for i.MX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
b3e5cb8d35 imx: imx8m: clock refactor dram pll part
Refactor dram_pll_init to accept args to configure different pll freq.
Introduce dram_enable_bypass and dram_disable_bypass

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
278f273c56 imx: spl: add MMC BOOT Device for i.MX8M
Add MMC BOOT Device for i.MX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Peng Fan
cd357ad112 imx: rename mx8m,MX8M to imx8m,IMX8M
Rename mx8m,MX8M to imx8m,IMX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jon Nettleton <jon@solid-run.com>
2019-01-01 14:12:18 +01:00
Peng Fan
4ac94bfa01 arm: imx8qxp: build u-boot-dtb.cfgout before checking files
Build u-boot-dtb.cfgout before checking files, otherwise
u-boot-dtb.cfgout is generated at late stage and cause final image not
generated.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Parthiban Nallathambi
ea91031b22 imx: hab: extend hab_auth_img to calculate ivt_offset
Current implementation of hab_auth_img command needs ivt_offset to
authenticate the image. But ivt header is placed at the end of image
date after padding.

This leaves the usage of hab_auth_img command to fixed size or static
offset for ivt header. New function "get_image_ivt_offset" is introduced
to find the ivt offset during runtime. The case conditional check in this
function is same as boot_get_kernel in common/bootm.c

With this variable length image e.g. FIT image with any random size can
have IVT at the end and ivt_offset option can be left optional

Can be used as "hab_auth_img $loadaddr $filesize" from u-boot script

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Breno Lima <breno.lima@nxp.com>
2019-01-01 14:12:18 +01:00
Ye Li
e246bfcfe2 SPL: Add HAB image authentication to FIT
Introduce two board level callback functions to FIT image loading process, and
a SPL_FIT_FOUND flag to differentiate FIT image or RAW image.

Implement functions in imx common SPL codes to call HAB funtion
to authenticate the FIT image. Generally, we have to sign multiple regions
in FIT image:
1. Sign FIT FDT data (configuration)
2. Sign FIT external data (Sub-images)

Because the CSF supports to sign multiple memory blocks, so that we can use one
signature to cover all regions in FIT image and only authenticate once.
The authentication should be done after the entire FIT image is loaded into
memory including all sub-images.
We use "-p" option to generate FIT image to reserve a space for FIT IVT
and FIT CSF, also this help to fix the offset of the external data (u-boot-nodtb.bin,
ATF, u-boot DTB).

The signed FIT image layout is as below:
--------------------------------------------------
|     |     |     |   |           |     |        |
| FIT | FIT | FIT |   | U-BOOT    | ATF | U-BOOT |
| FDT | IVT | CSF |   | nodtb.bin |     |   DTB  |
|     |     |     |   |           |     |        |
--------------------------------------------------

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Gary Bisson
68e7410fa2 imx: bootaux: fix stack and pc assignment on 64-bit platforms
Using ulong is wrong as its size depends on the Host CPU architecture
(32-bit vs. 64-bit) although the Cortex-M4 is always 32-bit.

Without this patch, the stack and PC are obviously wrong and it
generates an abort when used on 64-bit processors such as the i.MX8MQ.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Gary Bisson
cb15885b48 imx: mx8m: add memory mapping for CAAM and TCM
Otherwise can't boot the M4 core as it is impossible to load its
firmware into the TCM memory.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-01-01 14:12:18 +01:00
Fabien Lahoudere
725019bebe embestmx6boards: Add SPL support
In order to boot faster with falcon mode, we need to add SPL
support to riotboard.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2019-01-01 14:12:18 +01:00
Marcel Ziswiler
43e6f94cbc imx: mkimage: add size check to the u-boot.imx make target
The make macro to check if the binary exceeds the board size limit is
taken straight from the root Makefile.

Without this and e.g. enabled EFI Vybrid fails booting as the regular
size limit check does not take the final u-boot.imx binary size into
account which is bigger due to alignment as well as IMX header stuff.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2018-11-12 11:08:53 +01:00
Christoph Niedermaier
19bbd09825 imx: imx6: perform gpr_init only on suitable cpu types
If the function gpr_init is used in a common MX6 spl
implementation we have to ensure that it is only called for
suitable cpu types, otherwise it breaks hardware parts like
enet1, can1, can2, etc.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.de>
2018-11-08 14:35:40 +01:00
Tom Rini
cf033e04da Merged imx8 architecture, fix build for imx8 + warnings
-----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlvRk0gPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3IuAL/0jfCqEIzKbPXIz81zJ+43ZNPsyu4LluUFsP
 2s5+yKN4zPnxDaHmVyxKynREqCNCcbfz7biStEPRzIjQYPBWUWrqz1yceqvOTqWQ
 eh51ItNeow28IlnVEr40e5cNL28KPsAdO8Tx6yNiXdPndPOgm3DuFlT+Xbnv2/+P
 X9GYBoCD7EQ3aUJBDUKcN/AFSAl8YCQ43FKhowM18/ExeURiKk8YDRXVFgTDDd4J
 HIlzUbyeIG24xfmxc0MsUMEufMjqQE7k/tMfFvQJiwLBLkzuO+1WmbPlWd7XHqco
 t68mheBcm8m2G/CZJoxCy8ymUi5PKDJBhw3qQz646h+JiXP1lg7Yw8hf4nREV56k
 v/bMiDU1exIflI9Qf8CibxRAYv3bjKJD6p/uua2CIvsLO4emLPbi7DHFBdaQq+WB
 r32O0Xc6LiRBIhr/qeL/5HmxFT2o4lo+O9ybo10uhK8RA1LTPlQ0UNMwmSPLl4zR
 7e5YwnRCcHV492+/Fn31LWXUUVVxVw==
 =kkpS
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imx

Merged imx8 architecture, fix build for imx8 + warnings
2018-10-25 10:16:21 -04:00
Peng Fan
d79611598f imx: mkimage: avoid stop CI when required files not exists
Introduce a new script to check whether file exists and
use that check in Makefile to avoid break CI system.

The script return 1 when the required files not exists, return 0
when files exists. The script will ignore check to u-boot-dtb.bin,
because if there is something wrong to generate u-boot-dtb.bin,
there must be some code error.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-25 11:47:53 +02:00
Rui Miguel Silva
be277c3a89 imx: mx7: avoid some initialization if low level is skipped
We can have the case where u-boot is launched after some other low level
enabler, like for example when u-boot runs after arm-trusted-firmware
and/or optee. So, because of that we may need to jump the initialization of
some IP blocks even because we may no longer have the permission for that.

So, if the config option to skip low level init is set disable also timer,
board and csu initialization.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: u-boot@lists.denx.de
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22 14:37:28 +02:00
Peng Fan
0e5c8ce734 arm: imx: include imx8image support
When building i.MX8/8X board, use imx8image type.

`-e $(CONFIG_SYS_TEXT_BASE)` is not needed, but
no harm to keep it for i.MX8/8X

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22 13:01:27 +02:00
Peng Fan
d0dd73974c imx: add i.MX8QXP MEK board support
Add i.MX8QXP MEK board support
Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver.
Added README file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-22 13:00:09 +02:00
Peng Fan
2d58296f3e imx8: add dummy clock
This driver is mostly used to avoid build errors.
We use uclass clk driver for clk related operations.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
abeebc19db imx8: add iomux configuration api
Add iomux configuration api.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Anatolij Gustschin
2fdb1a1df9 imx8: cpu: add uclass based CPU driver
print_cpuinfo() in board init code requires uclass CPU driver,
add it to be able to display CPU info when CONFIG_DISPLAY_CPUINFO
option is enabled. CPU node in DT will have to include 'clocks'
and 'u-boot,dm-pre-reloc' properties for generic print_cpuinfo()
to work as expected. The driver outputs info for i.MX8QXP Rev A
and Rev B CPUs.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22 12:59:01 +02:00
Anatolij Gustschin
70b4b49b91 imx8: cpu: add function for reading FEC MAC from fuse
FEC driver requires imx_get_mac_from_fuse(). Add it in preparation
for ENETx support.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22 12:59:01 +02:00
Peng Fan
1ef20a3d81 imx8: add arch_cpu_init arch_cpu_init_dm
Add arch_cpu_init(_dm) mainly to open the channel between ACore and SCU.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
930b595291 imx8: add mmu and dram related functions
Add mmu memmap, some memory regions are reserved by M4, Arm Trusted
Firmware, so need to get memreg using SCFW API and setup the memmap.

Add dram_init, dram_init_banksize, get_effective_memsize functions,
according to the memreg.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
c1aae21d89 imx8: implement mmc_get_env_dev
Implement mmc_get_env_dev for i.MX8.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
8aa1505b59 imx8: add boot device detection
Add get_boot_device to detect boot device.
Add print_bootinfo to print the boot device info.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
60d33fcd19 imx8: add basic cpu support
Add basic cpu support, including cpu revision, cpu type,
cpu core detection.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Peng Fan
b2b8b9be2f imx: add Kconfig entry for i.MX8QXP
Add Kconfig entry for i.MX8QXP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-22 12:59:01 +02:00
Marek Vasut
39cb4f3c25 arm: mx5: Add M53Menlo board
Add Menlosystems M53 board, based on the M53 SoM.
This board has Ethernet, USB host, USB gadget, UART and LCD on it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-16 10:34:19 +02:00
Marek Vasut
ed85f77190 arm: mx5: Add LDB clock config code
Add code to configure PLL4, from which the LDB clock are directly
derived.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-16 10:34:02 +02:00
Marek Vasut
0b6b8a3a19 arm: imx: mx5: Make videoskip available on MX5
The board_video_skip() implementation in imx-common/video.c works
on i.MX5x as well, so loosen the SoC filter in Makefile to make it
available.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2018-10-16 10:33:26 +02:00
Patrick Delaunay
6180ea7e66 arm: remove prototype for get_timer_masked
The interruption support had be removed for ARM architecture and
the function get_timer_masked() is no more used except in some
the timer.c files.

This patch clean each timer.c which implement this function and
remove the associated prototype in u-boot-arm.h

For timer.c, I don't verify if the weak version of get_timer
(in lib/time.c) can be used

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10 13:35:09 -04:00
Marcel Ziswiler
2cea8d74dc imx: mx7: fix potential overflow in imx_ddr_size()
The imx_ddr_size() function may overflow as it is possible to kind of
over provision the DDR controller. Fix this by capping it to 2 GB which
is the maximum allowed size as per reference manual.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-10-09 18:32:47 +02:00
Fabio Estevam
82a8a93327 pico-imx6ul: Convert to SPL
There are two versions of imx6ul pico SOMs: one with 256MB and another
one with 512MB of RAM.

Convert to SPL so that both versions can be supported. This patch
doesn't rework the clock initialization to avoid changing the behavior
in this same patch, so it will be cleaned up in future.

Currently only the 256MB is tested/supported.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-14 15:04:24 +02:00
Anson Huang
57b620255e imx: mx7: add system suspend/resume support
This patch adds system suspend/resume support,
when linux kernel enters deep sleep mode, SoC will go
into below mode:

 - CA7 platform goes into STOP mode;
 - SoC goes into DSM mode;
 - DDR goes into self-refresh mode;
 - CPU0/SCU will be powered down.

When wake up event arrives:

 - SoC DSM mdoe exits;
 - CA7 platform exit STOP mode, SCU/CPU0 power up;
 - Invalidate L1 cache;
 - DDR exit self-refresh mode;
 - Do secure monitor mode related initialization;
 - Jump to linux kernel resume entry.

Belwo is the log of 1 iteration of system suspend/resume:

[  338.824862] PM: suspend entry (deep)
[  338.828853] PM: Syncing filesystems ... done.
[  338.834433] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  338.842939] OOM killer disabled.
[  338.846182] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  338.869717] PM: suspend devices took 0.010 seconds
[  338.877846] Disabling non-boot CPUs ...
[  338.960301] Retrying again to check for CPU kill
[  338.964953] CPU1 killed.
[  338.968104] Enabling non-boot CPUs ...
[  338.973598] CPU1 is up
[  339.267155] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[  339.275833] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[  339.284158] mmc1: queuing unknown CIS tuple 0x80 (6 bytes)
[  339.385065] PM: resume devices took 0.400 seconds
[  339.389836] OOM killer enabled.
[  339.392986] Restarting tasks ... done.
[  339.398990] PM: suspend exit

The resume entry function has to initialize stack pointer before calling
C code, otherwise there will be an external abort occur, in additional,
invalidate L1 cache must be done in secure section as well, so this
patch also adds assembly code back and keep it as simple as possible.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
2018-09-04 08:47:23 +02:00
Anson Huang
b059837850 imx: mx7: add gpc initialization for low power mode
Add i.MX7D GPC initialization for low power mode
support like system suspend/resume from linux kernel:

 - Pending IOMUXC IRQ to workaround GPC state machine issue;
 - Mask all GPC interrupts for M4/C0/C1;
 - Configure SCU timing;
 - Configure time slot ack;
 - Configure C0/C1 power up/down timing;
 - Configure wakeup source mechanism;
 - Disable DSM/RBC related settings.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04 08:47:23 +02:00
Anson Huang
11e52bca84 imx: mx7: psci: improve cpu hotplug flow
This patch improves cpu hotplug, previous cpu_off
implementation is NOT safe, a CPU can NOT power down
itself in runtime, it will cause system bus hang due
to pending transaction. So need to use other online
CPU to kill it when it is ready for killed.

Here use SRC parameter register and a magic number
of ~0 as handshake for killing a offline CPU,
when the online CPU checks the psci_affinity_info,
it will help kill the offline CPU according to
the magic number stored in SRC parameter register.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-09-04 08:47:23 +02:00
Michal Simek
b3815fc4e5 dm: Fix CMD_DM enabling
The patch "dm: Change CMD_DM enabling"
(sha1: 08a00cba06) was incorrectly updated
and PICO_IMX7D is missing imply CMD_DM and WARP7 has it twice.
This patch is fixing it.

Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-31 14:46:22 -04:00
Michal Simek
58008cbab5 Kconfig: Sort bool, default, select and imply options
Another round of sorting Kconfig entries aplhabetically.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:48 -04:00
Michal Simek
08a00cba06 dm: Change CMD_DM enabling
CMD_DM is used for debug purpose and it shouldn't be enabled by default
via Kconfig. Unfortunately this is in the tree for quite a long time
that's why solution is to use imply DM for all targets which are
enabling DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:48 -04:00
Michal Simek
5ed063d10f Kconfig: Sort bool, default, select and imply options
Fix Kconfig bool, default, select and imply options to be
alphabetically sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-30 07:18:48 -04:00
Michal Simek
6e7bdde4fe Kconfig: Replace spaces with tabs and missing newline
Trivial Kconfig cleanup. Use tabs instead of spaces and every Kconfig
entry should be separated by newline.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:47 -04:00
Adam Ford
bbbb50f9fd imx: i.mx6q: imx6q_logic: Migrate to SPL and enable SDP
Since the vast majority of i.MX6 boards are migrating to SPL,
this patch converts im6q_logic to SPL and enables the SDP for
loading SPL and u-boot.img over USB.  The Falcon mode only
supports NAND flash as of now due to limited space/RAM, but
all i.MX6D/Q SOM's from Logic PD have internal NAND from which
to boot.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23 11:03:20 +02:00
Fabio Estevam
d5b7177f91 pico-imx7d: Add SPL support
Convert pico-imx7d to SPL support.

There are two variants of pico-imx7d SOMs:
- One with 512MB of RAM
- One with 1GB of RAM

The 512MB module contains two Hynix H5TC2G63GFR-PBA.
The 1GB module contains two Hynix H5TC4G63GFR-PBA.

The RAM size is determined in runtime by reading GPIO1_12.

While at it, also add USB Serial Download mode support as it
is very helpful for loading SPL and u-boot.img via imx_usb_loader.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-23 10:59:48 +02:00
Stefan Agner
f97df68898 imx: mx7: psci: implement MIGRATE_INFO_TYPE
Implement MIGRATE_INFO_TYPE. This informs Linux that no migration
for the trusted operating system is necessary:
  [    0.000000] psci: Trusted OS migration not required

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23 10:54:32 +02:00
Stefan Agner
28a5af11f8 imx: mx7: psci: support CPU0 on/off
So far psci_cpu_(on|off) only worked for CPU1. Allow to control
CPU0 too. This allows to run the Linux PSCI checker successfully:
  [    2.213447] psci_checker: PSCI checker started using 2 CPUs
  [    2.219107] psci_checker: Starting hotplug tests
  [    2.223859] psci_checker: Trying to turn off and on again all CPUs
  [    2.267191] IRQ21 no longer affine to CPU0
  [    2.293266] Retrying again to check for CPU kill
  [    2.302269] CPU0 killed.
  [    2.311648] psci_checker: Trying to turn off and on again group 0 (CPUs 0-1)
  [    2.354354] IRQ21 no longer affine to CPU0
  [    2.383222] Retrying again to check for CPU kill
  [    2.392148] CPU0 killed.
  [    2.398063] psci_checker: Hotplug tests passed OK
  [    2.402910] psci_checker: Starting suspend tests (10 cycles per state)
  [    2.410019] psci_checker: cpuidle not available on CPU 0, ignoring
  [    2.416452] psci_checker: cpuidle not available on CPU 1, ignoring
  [    2.422757] psci_checker: Could not start suspend tests on any CPU
  [    2.429370] psci_checker: PSCI checker completed

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23 10:54:23 +02:00
Stefan Agner
a89eb89b38 imx: mx7: psci: provide complete PSCI 1.0 implementation
PSCI 1.0 require PSCI_VERSION, PSCI_FEATURES, AFFINITY_INFO and
CPU_SUSPEND to be implemented. Commit 0ec3d98f76 ("mx7_common:
use psci 1.0 instead of 0.1") marked the i.MX 7 implementation to
be PSCI 1.0 compliant but failed to implement those functions.
Especially the missing PSCI version callback was noticeable when
booting Linux:

  [    0.000000] psci: probing for conduit method from DT.
  [    0.000000] psci: PSCIv65535.65535 detected in firmware.
  [    0.000000] psci: Using standard PSCI v0.2 function IDs
  [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  [    0.000000] psci: SMC Calling Convention v1.0

This patch provides a minimal implementation thereof. With this
patch applied Linux detects PSCI 1.0:

  [    0.000000] psci: probing for conduit method from DT.
  [    0.000000] psci: PSCIv1.0 detected in firmware.
  [    0.000000] psci: Using standard PSCI v0.2 function IDs
  [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  [    0.000000] psci: SMC Calling Convention v1.0

Fixes: 0ec3d98f76 ("mx7_common: use psci 1.0 instead of 0.1")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23 10:54:01 +02:00
Stefan Agner
cff38c5504 imx: mx7: psci: use C code exclusively
There is no need for assembly in the platform specific part of
the PSCI implementation.

Note that this does not make it a complete PSCI 1.0 implementation
yet but aids to do so in upcoming patches.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23 10:53:42 +02:00
Michael Trimarchi
4a72abcb71 imx: imx6: Add comment to gpr_init function
This function can be used only for some of the nxp SoC. Make
it explicit in the comment. This adjust a bit commit
3aa4b703b4 ("imx: imx6: Move gpr_init() function to soc.c")

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-23 10:50:53 +02:00
Fabio Estevam
2756d31fae mx7: Remove BMODE support
i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog:
A watchdog timeout or software trigger will not reset the SOC"), so
remove its support.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-07-23 10:50:00 +02:00
Michael Trimarchi
9236269de5 imx: mx6: Fix implementantion reset_misc
lcdif_power_down should not be included in spl build to avoid build
failure introduced by commit eb111bb31d

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-07-23 10:31:52 +02:00
Stefan Agner
31b1e17f44 board: toradex: add Colibri iMX6ULL support
Add support for the Colibri iMX6ULL module which comes with
on-board raw NAND.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23 10:12:00 +02:00
Yaniv Levinsky
c5d548a9f8 env: common: accept flags on reset to default env
The function set_default_env() sets the hashtable flags for import_r().
Formally set_default_env() doesn't accept flags from its callers. In
practice the caller can (un)set the H_INTERACTIVE flag, but it has to be
done using the first character of the function's string argument. Other
flags like H_FORCE can't be set by the caller.

Change the function to accept flags argument. The benefits are:
1. The caller will have to explicitly set the H_INTERACTIVE flag,
   instead of un-setting it using a special char in a string.
2. Add the ability to propagate flags from the caller to himport(),
   especially the H_FORCE flag from do_env_default() in nvedit.c that
   currently gets ignored for "env default -a -f" commands.
3. Flags and messages will not be coupled together. A caller will be
   able to set flags without passing a string and vice versa.

Please note:
The propagation of H_FORCE from do_env_default() does not introduce any
functional changes, because currently himport_r() is set to destroy the
old environment regardless if H_FORCE flag is set or not. More changes
are needed to utilize the propagation of H_FORCE.

Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2018-07-19 16:17:58 -04:00
Tom Rini
03b54997d5 board/aries: Remove
The various Aries Embedded boards have been orphaned for a year and no
one has come forward to take care of them.  Remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-02 15:52:50 -04:00
Fabio Estevam
ee322f3c79 mx5: Select ARM_CORTEX_A8_CVE_2017_5715
On a 4.18-rc1 kernel the following warning is seen on i.MX51 and
i.MX53:

CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable

Select the ARM_CORTEX_A8_CVE_2017_5715 workaround for i.MX51/i.MX53
to fix the problem.

With this patch applied the kernel reports:

CPU0: Spectre v2: using BPIALL workaround

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-30 08:49:55 -04:00
Tom Rini
de76610545 Merge git://git.denx.de/u-boot-imx 2018-06-27 13:09:55 -04:00
Michal Simek
20b016a336 common: Fix cpu nr type which is always unsigned type
cpu_cmd() is reading cpu number via simple_strtoul() which is always
unsigned type.
Platform code implementations are not expecting that nr can be negative
and there is not checking in the code for that too.

This patch is using u32 type for cpu number to make sure that platform
code get proper value range.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-19 07:31:45 -04:00
Ye Li
c5437e5b8a imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platforms
According to the Cortex-A7 TRM, for ACTLR.SMP bit "You must ensure this bit
is set to 1 before the caches and MMU are enabled, or any cache and TLB
maintenance operations are performed".
ROM sets this bit in normal boot flow, but when in serial download mode,
it is not set.
Here we add it in u-boot as a common flow for all i.MX cortex-a7 platforms,
including mx7d, mx6ul/ull and mx7ulp.

Signed-off-by: Ye Li <ye.li@nxp.com>
[fabio: adapted to U-Boot mainline codebase and make checkpatch happy]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-18 16:21:25 +02:00
Lukasz Majewski
ee94365557 arm: imx53: Add support for imx53 boards from K+P
This commit adds support for DDC and HSC boards from
K+P in u-boot.

Console output:

U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200)

CPU:   Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: WDOG
Model: K+P iMX53
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Module EEPROM:
  ID: TQMa53-CB.0401
  SN: 63152762
  MAC: 00:0b:64:03:14:2a
BBoard:40x0 Rev:10
Net:   eth0: ethernet@63fec000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-18 08:29:38 +02:00
Jagan Teki
e810565e23 i.MX6DL: mamoj: Add PFUZE100 support
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support
for it through DM_PMIC dt definition.

pmic log:
Reviewed-by: Stefano Babic <sbabic@denx.de>

========
=> pmic list
| Name                            | Parent name         | Parent uclass @ seq
| pfuze100@08                     | i2c@021f8000        | i2c @ 3
=> pmic dev pfuze100@08
dev: 0 @ pfuze100@08
=> pmic dump
Dump pmic: pfuze100@08 registers

0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81
0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00
0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b
0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08
0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10
0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18 08:23:43 +02:00
Jagan Teki
dda9892171 i.MX6DL: mamoj: Add I2C support
i.MX6DL Mamoj has i2c3 and i2c4 buses, add support
through DM_I2C with dt definition.

i2c log:
Reviewed-by: Stefano Babic <sbabic@denx.de>

=======
=> i2c bus
Bus 2:  i2c@021a8000
Bus 3:  i2c@021f8000
=> i2c dev 2
Setting bus to 2
=> i2c speed 400000
Setting bus speed to 400000 Hz
=> i2c probe
Valid chip addresses: 20 51 53
=> i2c md 53 0xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
=> i2c md 51 0xff
00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53    ..@P.CFRB......S
=> i2c dev 3
Setting bus to 3
=> i2c speed 100000
Setting bus speed to 100000 Hz
=> i2c probe
Valid chip addresses: 08 40 48 4B
=> i2c md 08 0xff
00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18 08:23:43 +02:00
Jagan Teki
1494cc89cb i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Add initial support for i.MX6DL BTicino Mamoj board.

Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18 08:23:43 +02:00
Peter Robinson
02ada2d958 mx6: Select CONFIG_MP with MX6_SMP
It makes sense to select the MP multi processor option at the same time we
select the other SMP options needed for SMP capable i.MX6 SoCs.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17 12:04:22 +02:00
Magnus Lilja
71720d6793 mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.
Also remove the #ifdef's from clock.h since the Kconfig values defaults
the to old default values in clock.h.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17 12:02:28 +02:00
Magnus Lilja
3159ec64f5 mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.
Move CONFIG_MX31 from mx31pdk.h to mx31pdk_defconfig and introduce
necessary Kconfig changes as well.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17 12:02:24 +02:00
Ian Ray
51a42bea52 board: ge: bx50v3: remove redundant targets
This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3.
The boards are identified automatically at runtime.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17 11:58:48 +02:00
Patrick Delaunay
47ec6b4ea3 imx7: psci: save context id in cpu_on command
Replace the psci_save_target_pc call by the new function
psci_save(cpu, pc,context_id)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-05-07 11:52:55 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
b25f8e2112 Merge git://git.denx.de/u-boot-imx 2018-04-30 07:14:05 -04:00
Andre Przywara
7842b6a91e arm: move SYS_ARCH_TIMER to KConfig
SYS_ARCH_TIMER guards the usage of the ARM Generic Timer (aka arch
timer) in U-Boot.
At the moment it is mandatory for ARMv8 and used by a few ARMv7 boards.
Add a proper Kconfig symbol to express this dependency properly,
allowing certain board configuration to later disable arch timer in case
there are any problems with it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[tuomas: rebase + fix conflicts and resync with moveconfig & use select]
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2018-04-28 18:30:43 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Sébastien Szymanski
ea77217828 imx6ul: opos6ul: in Serial Downloader boot mode use ymodem
When booting in Serial Downloader mode load the U-Boot image using
ymodem.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-04-26 09:34:16 +02:00
Sébastien Szymanski
30754ef77c imx6ul: opos6ul: add SPL_DM support
Since commit commit 152038ea18 ("i.MX6UL: icore: Add SPL_OF_CONTROL
support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support
makes the board boot again.

Fixes: commit 152038ea18 ("i.MX6UL: icore: Add SPL_OF_CONTROL support")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2018-04-26 09:34:00 +02:00
Tom Rini
ebca902aeb Merge git://git.denx.de/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 08:43:50 -04:00
Trent Piepho
f916757300 imx: Create distinct pre-processed mkimage config files
Each imx image is created by a separate sub-make and during this process
the mkimage config file is run though cpp.

The cpp output is to the same file no matter what imx image is being
created.

This means if two imx images are generated in parallel they will attempt
to independently produce the same pre-processed mkimage config file at
the same time.

Avoid the problem by making the pre-processed config file name unique
based on the imx image it will be used in.  This way each image will
create a unique config file and they won't clobber each other when run
in parallel.

This should fixed the build bug referenced in b5b0e4e3 ("imximage:
Remove failure when no IVT offset is found").

Cc: Breno Lima <breno.lima@nxp.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-15 11:55:23 +02:00
Bryan O'Donoghue
723f8359c1 imx: mx7: snvs: Add an SNVS init routine
Working with HAB on the i.MX7 we've encountered a case where a board that
successfully authenticates u-boot when booting Linux via OPTEE subsequently
fails to properly bring up the RTC.

The RTC registers live in the low-power block of the Secure Non-Volatile
Storage (SNVS) block.

The root cause of the error has been traced to the HAB handing off the
SNVS-RTC in a state where HPCOMR::NPSWA_EN = 0 in other words where the
Non-Privileged Software Access Enable bit is zero. In ordinary
circumstances this is OK since we typically do not run in TZ mode, however
when we boot via HAB and enablng TrustZone, it is required to set
HPCOMR::NPSWA_EN = 1 in order for the upstream Linux driver to have
sufficient permissions to manipulate the SNVS-LP block.

On our reference board it is the difference between Linux doing this:

root@imx7s-warp-mbl:~# dmesg | grep rtc
snvs_rtc_enable read 0x00000000 from SNVS_LPLR @ 0x00000034
snvs_rtc_enable read 0x00000021 from SNVS_LPCR @ 0x00000038
snvs_rtc_enable read 0x00000000 from SNVS_HPLR @ 0x00000000
snvs_rtc_enable read 0x80002100 from SNVS_HPCOMR @ 0x00000004
snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered
         30370000.snvs:snvs-rtc-lp as rtc0
snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to2018-04-01 00:51:04 UTC (1522543864)

and doing this:

root@imx7s-warp-mbl:~# dmesg | grep rtc
snvs_rtc_enable read 0x00000000 from SNVS_LPLR @ 0x00000034
snvs_rtc_enable read 0x00000020 from SNVS_LPCR @ 0x00000038
snvs_rtc_enable read 0x00000001 from SNVS_HPLR @ 0x00000000
snvs_rtc_enable read 0x00002020 from SNVS_HPCOMR @ 0x00000004
snvs_rtc 30370000.snvs:snvs-rtc-lp: failed to enable rtc -110
snvs_rtc: probe of 30370000.snvs:snvs-rtc-lp failed with error -110
hctosys: unable to open rtc device (rtc0)

Note bit 1 of LPCR is not set in the second case and is set in the first
case and that bit 31 of HPCOMR is set in the second case but not in the
first.

Setting NPSWA_EN in HPCOMR allows us to boot through enabling TrustZone
and continue onto the kernel. The kernel then has the necessary permissions
to set LPCR::SRTC_ENV (RTC enable in the LP command register) whereas in
contrast - in the failing case the non-privileged kernel cannot do so.

This patch adds a simple init_snvs() call which sets the permission-bit
called from soc.c for the i.MX7. It may be possible, safe and desirable to
perform this on other i.MX processors but for now this is only tested on
i.MX7 as working.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2018-04-15 11:48:44 +02:00
Lukasz Majewski
dd4671cb3f imx: board: Add support for the K+P's kp_imx6q_tpc board
This commit provides support for Kieback & Peter GmbH IMX6Q based
TPC board.

U-boot console output:

U-Boot SPL 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200)
Trying to boot from MMC1

U-Boot 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 37C
Reset cause: POR
Board: K+P KP_IMX6Q_TPC i.MX6Q
       Watchdog enabled
I2C:   ready
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Autoboot in 3 seconds
2018-04-15 11:47:19 +02:00
Bryan O'Donoghue
49e6242673 imx: hab: Provide hab_auth_img_or_fail command
This patch adds hab_auth_img_or_fail() a command line function that
encapsulates a common usage of authenticate and failover, namely if
authenticate image fails, then drop to BootROM USB recovery mode.

For secure-boot systems, this type of locked down behavior is important to
ensure no unsigned images can be run.

It's possible to script this logic but, when done over and over again the
environment starts get very complex and repetitive, reducing that script
repetition down to a command line function makes sense.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Breno Lima <breno.lima@nxp.com>
2018-04-15 11:44:13 +02:00
Bryan O'Donoghue
1ab1ffded4 imx: mx7: Add comment to describe OTP TESTER registers
The tester registers provide a unique chip-level identifier which
get_board_serial() returns in a "struct tag_serialnr".

This patch documents the properties of the registers; in summary.

31:0 OCOTP_TESTER0 (most significant)
- FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID

OCOTP_TESTER1 (least significant)
31:24
- The X-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique
  ID
23:16
- The Y-coordinate of the die location on the wafer/SJC CHALLENGE/ Unique
  ID
15:11
- The wafer number of the wafer on which the device was fabricated/SJC
  CHALLENGE/ Unique ID
10:0
- FSL-wide unique, encoded LOT ID STD II/SJC CHALLENGE/ Unique ID

The 64 bits of data generate a unique serial number per-chip.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-15 11:44:13 +02:00
Bryan O'Donoghue
ca83182226 imx: mx7: Fix CONFIG_SERIAL_TAG compilation
Currently when we define CONFIG_SERIAL_TAG we will barf with a failure to
define "struct tag_serialnr".

This structure is defined in <asm/setup.h>, this patch includes
<asm/setup.h> to fix.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-15 11:44:13 +02:00
Marek Vasut
14eeb683a8 ARM: mx6: ddr: Add write leveling correction code
When the DDR calibration is enabled, a situation may happen that it
will fail on a few select boards out of a whole production lot. In
particular, after the first write leveling stage, the MPWLDECTRLx
registers will contain a value 0x1nn , for nn usually being 0x7f or
slightly lower.

What this means is that the HW write leveling detected that the DQS
rising edge on one or more bundles arrives slightly _after_ CLK and
therefore when the DDR DRAM samples CLK on the DQS rising edge, the
CLK signal is already high (cfr. AN4467 rev2 Figure 7 on page 18).

The HW write leveling then ends up adding almost an entire cycle (thus
the 0x17f) to the DQS delay, which indeed aligns it, but also triggers
subsequent calibration failure in DQS gating due to this massive offset.

There are two observations here:
- If the MPWLDECTRLx value is corrected from 0x17f to 0x0 , then the
  DQS gating passes, the entire calibration passes as well and the
  DRAM is perfectly stable even under massive load.
- When using the NXP DRAM calibrator for iMX6/7, the value 0x17f or so
  in MPWLDECTRx register is not there, but it is replaced by 0x0 as one
  would expect.

Someone from NXP finally explains why, quoting [1]:

    "
    Having said all that, the DDR Stress Test does something that we
    do not advertise to the users. The Stress Test iself looks at the
    values of the MPWLDECTRL0/1 fields before reporting results, and
    if it sees any filed with a value greater than 200/256 delay
    (reported as half-cycle = 0x1 and ABS_OFFSET > 0x48), the DDR
    Stress test will reset the Write Leveling delay for this lane
    to 0x000 and not report it in the log.

    The reason that the DDR Stress test does this is because a delay
    of more than 78% a clock cycle means that the DQS edge is arriving
    within the JEDEC tolerence of 25% of the clock edge. In most cases,
    DQS is arriving < 5% tCK of the SDCLK edge in the early case, and
    it does not make sense to delay the DQS strobe almost a full clock
    cycle and add extra latency to each Write burst just to make the
    two edges align exactly. In this case, we are guilty of making a
    decision for the customer without telling them we are doing it so
    that we don't have to provide the above explanation to every customer.
    They don't need to know it.
    "

This patch adds the correction described above, that is if the MPWLDECTRx
value is over 0x148, the value is corrected back to 0x0.

[1] https://community.nxp.com/thread/456246

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-04-15 11:39:23 +02:00
Eran Matityahu
0fe69adc8f imx7: spl: Check for Serial Downloader in spl_boot_device
Similarly to imx6, before reading the boot device, first check
bmode to see if the serial downloader has been selected
explicitly, then check whether the serial downloader has been
activated due to unbootable primary boot devices (e.g. empty eMMC).

If the serial downloader is activated, return BOOT_DEVICE_BOARD.
This allows SPL with SDP support to wait for the U-Boot image
to be loaded via the serial download protocol using imx_usb_loader.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
2018-03-29 17:33:12 +02:00
Bryan O'Donoghue
ca89df7dd4 imx: hab: Convert DCD non-NULL error to warning
commit 8c4037a09a ("imx: hab: Ensure the IVT DCD pointer is Null prior
to calling HAB authenticate function.") makes the DCD field being NULL a
dependency.

This change though will break loading and executing of existing pre-signed
binaries on a u-boot update i.e. if this change is deployed on a board you
will be forced to redo all images on that board to NULL out the DCD.

There is no prior guidance from NXP that the DCD must be NULL similarly
public guidance on usage of the HAB doesn't call out this NULL dependency
(see boundary devices link).

Since later SoCs will reject a non-NULL DCD there's no reason to make a
NULL DCD a requirement, however if there is an actual dependency for later
SoCs the appropriate fix would be to do SoC version checking.

Earlier SoCs are capable (and happy) to authenticate images with non-NULL
DCDs, we should not be forcing this change on downstream users -
particularly if it means those users now must rewrite their build systems
and/or redeploy signed images in the field.

Fixes: 8c4037a09a ("imx: hab: Ensure the IVT DCD pointer is Null prior
to calling HAB authenticate function.")

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Link: https://boundarydevices.com/high-assurance-boot-hab-dummies
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-13 07:51:32 -04:00
Yasushi SHOJI
314d9f7e3e imx: syscounter: make sure asm is volatile
Without the volatile attribute, compilers are entitled to optimize out
the same asm().  In the case of __udelay() in syscounter.c, it calls
`get_ticks()` twice, one for the starting time and the second in the
loop to check the current time.  When compilers inline `get_ticks()`
they see the same `mrrc` instructions and optimize out the second one.
This leads to infinite loop since we don't get updated value from the
system counter.

Here is a portion of the disassembly of __udelay:

  88:	428b      	cmp	r3, r1
  8a:	f8ce 20a4 	str.w	r2, [lr, #164]	; 0xa4
  8e:	bf08      	it	eq
  90:	4282      	cmpeq	r2, r0
  92:	f8ce 30a0 	str.w	r3, [lr, #160]	; 0xa0
  96:	d3f7      	bcc.n	88 <__udelay+0x88>
  98:	e8bd 8cf0 	ldmia.w	sp!, {r4, r5, r6, r7, sl, fp, pc}

Note that final jump / loop at 96 to 88, we don't have any `mrrc`.

With a volatile attribute, the above changes to this:

  8a:	ec53 2f0e 	mrrc	15, 0, r2, r3, cr14
  8e:	42ab      	cmp	r3, r5
  90:	f8c1 20a4 	str.w	r2, [r1, #164]	; 0xa4
  94:	bf08      	it	eq
  96:	42a2      	cmpeq	r2, r4
  98:	f8c1 30a0 	str.w	r3, [r1, #160]	; 0xa0
  9c:	d3f5      	bcc.n	8a <__udelay+0x8a>
  9e:	e8bd 8cf0 	ldmia.w	sp!, {r4, r5, r6, r7, sl, fp, pc}
  a2:	bf00      	nop

I'm advised[1] to put volatile on all asm(), so this commit also adds it
to the asm() in timer_init().

[1]: https://lists.denx.de/pipermail/u-boot/2018-March/322062.html

Signed-off-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-09 13:06:14 +01:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Fabio Estevam
0339086bd9 imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() function"
Commit d695d66278 ("spl: eMMC/SD: Provide one __weak spl_boot_mode()
function") breaks the boot on several i.MX6 boards,
such as cuboxi and wandboard:

U-Boot SPL 2018.03-rc1-00212-g48914fc119 (Feb 10 2018 - 11:04:33 +1300)
Trying to boot from MMC1
Failed to mount ext2 filesystem...
spl_load_image_ext: ext4fs mount err - 0

Partially revert it so that we can boot U-Boot again on these
i.MX6 platforms.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
2018-02-24 19:33:32 +01:00
Jagan Teki
3d40915350 imx6q: engicam: Use SPL_LOAD_FIT for MMC boards
Currently SPL_LOAD_FIT is unable to boot from nand on
i.MX6QDL platform, so enable only for MMC boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-02-22 14:51:01 +01:00
Breno Lima
7b889baf29 arm: imx: hab: Define HAB_RVT_BASE according to the processor version
Currently the following devices are using a different definition for ROM
Vector Table addresses:

- i.MX6DQP =  All rev
- i.MX6DQ >= rev 1.5
- i.MX6SDL >= rev 1.2

There is no need to create a new RVT macros since the only update were the
RVT base address. Remove HAB_RVT_*_NEW macros and define a new RVT base
address.

More details about RVT base address can be found on processors Reference
Manual and in the following documents:

EB803: i.MX 6Dual/6Quad Applications Processor Silicon Revision 1.2 to 1.3
Comparison

EB804: i.MX 6Solo/6DualLite Application Processor Silicon Revision 1.1
to 1.2/1.3 Comparison

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-22 14:36:06 +01:00
Utkarsh Gupta
20fa1dd386 imx: hab: Check if CSF contains deprecated commands
Write, Check and Set MID commands have been deprecated from the Code
Signing Tool (CST) v2.3.3 and will not be implemented in newer versions
of HAB, hence the following features are no longer available:

- Write Data
- Clear Mask
- Set Mask
- Check All Clear
- Check All Set
- Check Any Clear
- Check Any Set
- Set MID

The inappropriate use of Write Data command may lead to an incorrect
authentication boot flow. Since no specific application has been identified
that requires the use of any of these features, it is highly recommended to
add this check.

Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-22 14:35:57 +01:00
Utkarsh Gupta
ed286bc80e imx: hab: Check if CSF is valid before authenticating image
For proper authentication the HAB code must check if the CSF is valid.
Users must call the csf_is_valid() function to parse the CSF prior to
authenticating any additional images. The function will return a failure
if any of the following invalid conditions are met:

- CSF pointer is NULL
- CSF Header does not exist
- CSF does not lie within the image bounds
- CSF command length zero

Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-22 14:35:42 +01:00
Utkarsh Gupta
8c4037a09a imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB authenticate function.
DCD commands should only be present in the initial boot image loaded by
the SoC ROM. DCD should not be present in images that will be verified
by software using HAB RVT authentication APIs. Newer versions of HAB
will generate an error if a DCD pointer is present in an image being
authenticated by calling the HAB RVT API. Older versions of HAB will
process and run DCD if it is present, and this could lead to an incorrect
authentication boot flow.

It is highly recommended this check is in place to ensure additional HAB
verified images do not include a DCD table.

Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-22 14:35:32 +01:00
Breno Lima
669f2d189e imx: hab: Keep CAAM clock enabled after authenticating additional images
Currently it is not possible to run CMD_DEK on i.MX SPL targets:

=> dek_blob 0x12000000 0x12001000 128

The system hangs after running dek_blob because the CAAM clock is being
disabled by the HAB code. There is no need to disable CAAM clock after
authenticating additional boot images, thus keep CAAM clock enabled to
address this issue.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-22 14:35:20 +01:00
Stefan Agner
25c5b4e1bf arm: imx: mx28: Move MX28 selection to Kconfig
The motivation for moving MX28 selection to Kconfig is to be able
to better handle NAND MXS selection through Kconfig.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08 10:17:17 -05:00
Stefan Agner
c5343d4e11 arm: imx: mx23: Move MX23 selection to Kconfig
The motivation for moving MX23 selection to Kconfig is to be able
to better handle NAND MXS selection through Kconfig.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08 10:17:16 -05:00
Lukasz Majewski
d695d66278 spl: eMMC/SD: Provide one __weak spl_boot_mode() function
The goal of this patch is to clean up the code related to choosing SPL
MMC boot mode.

The spl_boot_mode() now is called only in spl_mmc_load_image() function,
which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled.

To achieve the goal, all per mach/arch implementations eligible for
unification has been replaced with one __weak implementation.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP)
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-07 22:06:18 -05:00
Bryan O'Donoghue
d1ceb0c488 imx: mx7: run sec_init for CAAM RNG
This patch adds a sec_init call into arch_misc_init(). Doing so in
conjunction with the patch "drivers/crypto/fsl: assign job-rings to
non-TrustZone" enables use of the CAAM in Linux when OPTEE/TrustZone is
active.

u-boot will initialise the RNG and assign ownership of the job-ring
registers to a non-TrustZone context. With recent changes by Lukas Auer to
fully initialize the RNG in sec_init() this means that u-boot will hand-off
the CAAM in a state that Linux then can use the CAAM without touching the
reserved DECO registers.

This change is safe both for the OPTEE/TrustZone boot path and the regular
non-OPTEE/TrustZone boot path.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Marco Franchi <marco.franchi@nxp.com>
Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:14:11 +01:00
Patrick Bruenn
55e83d2e36 arm: imx: mx53loco: remove usage of mx53_dram_size
Static variables are not available during board_init_f().
'static uint32_t mx53_dram_size[2];' was used in board specific
dram_init(), dram_init_banksize() and get_effective_memsize() to avoid
multiple calls to get_ram_size().

Reused dram initialization functions from arch/arm/mach-imx/mx5/mx53_dram.c

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2018-02-04 12:00:58 +01:00
Patrick Bruenn
9d9baacb90 arm: imx: m53evk: remove usage of mx53_dram_size
Static variables are not available during board_init_f().
'static uint32_t mx53_dram_size[2];' was used in board specific
dram_init(), dram_init_banksize() and get_effective_memsize() to avoid
multiple calls to get_ram_size().

Reused dram initialization functions from arch/arm/mach-imx/mx5/mx53_dram.c

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2018-02-04 12:00:58 +01:00
Patrick Bruenn
daebb796ff arm: imx: cx9020: move dram init into common place
Move dram_init(), dram_init_banksize() and get_effective_memsize() to
arch/arm/mach-imx/mx5/mx53_dram.c, where it can be reused by m53evk and
mx53loco.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2018-02-04 12:00:58 +01:00
Peng Fan
e0e4e53375 imx: makefile: compile files for i.MX8M
Compile files for i.MX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
fcdbde7ce0 imx: mx8m: add soc related settings and files
Add SoC level initialization code
 - arch_cpu_init
 - mmu table
 - detect cpu revision
 - reset cpu and wdog settings
 - timer init
 - wdog settings
 - lowlevel init to save/restore registers
 - a few dummy header file to avoid build failure
 - ft_system_setup

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:00:58 +01:00
Peng Fan
c1ef486327 imx: mx7: move mmc env code to mmc_env.c
The mx7 mmc env code is shared by i.MX8M, so move it to mmc_env.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-02-04 12:00:58 +01:00
Peng Fan
80ebf86d9b imx: cpu: support get_boot_device for i.MX8M
Enable get_boot_device for i.MX8M, it supports boot type USB.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
770611f21e imx: mx7: move get_boot_device to cpu.c
Move get_boot_device to cpu.c to prepare adding i.MX8M support,
because i.MX8M share same code with i.MX7.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
ecd7ab5628 imx: bootaux: support i.MX8M
Add i.MX8M support. Because i.MX8M use SiP call trap
to Arm Trusted Firmware to handle M4, so use #ifdef
to avoid build error on i.MX6/7.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-02-04 12:00:58 +01:00
Peng Fan
8cf223133c imx: cleanup bootaux
Move i.MX6/7 bootaux code to imx_bootaux.c.
The i.MX6/7 has different src layout, so define M4 reg offset
to ease the cleanup. Redefine the M4 related BIT for share
common code.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:00:58 +01:00
Peng Fan
6ce8b10b87 imx: refactor imx_get_mac_from_fuse
Move imx_get_mac_from_fuse to a new mac.c for i.MX6/7.
Since fuse regs structure are different for i.MX6/7, use mac
address offset in code and define a new local struture
imx_mac_fuse.

Also sort the config order.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
e56d9d79e5 imx: cpu: add cpu speed/grade for i.MX8M
Use more general enum types for speed grade.
Refine get_cpu_speed_grade_hz to support i.MX8M.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
423e84bc72 imx: cpu: move speed/temp to common cpu
The i.MX7 cpu speed/temp code could be reused on i.MX8M,
so move them to common cpu code.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
d7cb10a05f imx: spl: implement spl_boot_device for i.MX8M
Implement spl_boot_device for i.MX8M.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
7537e93290 imx: cpu: update cpu file to support i.MX8M
Update get_reset_cause to reflect i.MX8M
Compile out get_ahb_clk and set_chipselect_size for i.MX8M

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
de274663f5 imx: add sip function
Add SiP (Silicon Provider) services function to issue
SMC call to Arm Trusted Firmware.

More SiP information could be found in
  https://github.com/ARM-software/arm-trusted-firmware/blob/master/
  docs/arm-sip-service.rst

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
bb0fabe42d imx: mx8m: add clock driver
Add clock driver to support i.MX8M.

There are two kind PLLs, FRAC pll and SSCG pll. ROM already
configured SYS PLL1/2, we only need to configure the output.
ocotp/i2c/pll decoding and configuration/usdhc/lcdif/dram pll/
enet clock are configured in the code.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Peng Fan
7a7391fd7e imx: add i.MX8M into Kconfig
Add i.MX8M into Kconfig, create a new folder mx8m
dedicated for i.MX8M.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-04 12:00:58 +01:00
Anson Huang
4f0cd03723 imx: mx7: psci: add system power off support
Add i.MX7 PSCI system power off support, linux
kernel can use "poweroff" command to power off
system via SNVS, PMIC power will be disabled.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-02-04 12:00:58 +01:00
Anson Huang
169c20e903 imx: mx7: psci: add system reset support
Add i.MX7 PSCI system reset support, linux
kernel can use "reboot" command to reset
system even wdog driver is disabled in kernel.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
2018-02-04 12:00:58 +01:00
Tom Rini
1d12a7c8cd Merge git://git.denx.de/u-boot-spi 2018-01-26 07:46:34 -05:00
Álvaro Fernández Rojas
48263504c8 wait_bit: use wait_for_bit_le32 and remove wait_for_bit
wait_for_bit callers use the 32 bit LE version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24 12:03:43 +05:30
Bryan O'Donoghue
9587b0d611 arm: imx: hab: Add hab_failsafe console command
hab_failsafe when called puts the part into BootROM recovery mode.
This will allow u-boot scripts to script the dropping down into recovery
mode.

=> hab_failsafe

Shows the i.MX7 appear as "hiddev0,hidraw5: USB HID v1.10 Device [Freescale
SemiConductor Inc  SP Blank ULT1] " in a Linux dmesg thus allowing download
of a new image via the BootROM USB download protocol routine.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
317956e82c arm: imx: hab: Implement hab_rvt_failsafe
This patch implements the basic callback hooks for
hab_rvt_check_failsafe for BootROM code using the older BootROM address
layout - in my test case the i.MX7. Code based on new BootROM callbacks
will just do nothing and there's definitely a TODO to implement that extra
functionality on the alternative BootROM API.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
07eefaf16e arm: imx: hab: Make imx_hab_is_enabled global
It will be helpful to boot commands to know if the HAB is enabled. Export
imx_hab_is_enabled() now to facilitate further work with this data-point in
a secure-boot context.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
4467ae6c28 arm: imx: hab: Make authenticate_image() return zero on open boards
The BootROM will not successfully process a HAB image passed by u-boot
unless the board has been set into locked mode. Some of the existing usages
of authenticate_image() expect and rely on unlocked boards doing the
following

1. Not calling into the BootROM authenticate_image() callback
2. Returning a pass status for authenticate_image() calls anyway

A previous patch removed the necessity to call into imx_hab_is_enabled()
twice. This patch ensures the reliance on authenticate_image() returning
zero is maintained.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Breno Matheus Lima <brenomatheus@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
e5b30e4ac1 arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
Understanding if the HAB is enabled is something that we want to
interrogate and report on outside of the HAB layer. First step to that is
renaming the relevant function to match the previously introduced external
naming convention imx_hab_function()

The name imx_hab_is_hab_enabled() is a tautology. A more logical name is
imx_hab_is_enabled().

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
57f6548606 arm: imx: hab: Prefix authenticate_image with imx_hab
Tidy up the HAB namespace a bit by prefixing external functions with
imx_hab. All external facing functions past this point will be prefixed in
the same way to make the fact we are doing IMX HAB activities clear from
reading the code. authenticate_image() could mean anything
imx_hab_authenticate_image() is on the other hand very explicit.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
58bebfb753 arm: imx: hab: Make internal functions and data static
There is no need to export these functions and data structures externally.
Make them all static now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
2c6c68d282 arm: imx: hab: Print HAB event log only after calling ROM
The current flow of authenticate_image() will print the HAB event log even
if we reject an element of the IVT header before ever calling into the ROM.
This can be confusing.

This patch changes the flow of the code so that the HAB event log is only
printed out if we have called into the ROM and received some sort of status
code.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
b7c3cae7d3 arm: imx: hab: Add a hab_rvt_check_target to image auth
Add a hab_rvt_check_target() step to authenticate_image() as a sanity
check for the target memory region authenticate_image() will run over,
prior to making the BootROM authentication callback itself.

This check is recommended by the HAB documentation so it makes sense to
adhere to the guidance and perform that check as directed.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
c0a55b7344 arm: imx: hab: Implement hab_rvt_check_target
This patch implements the basic callback hooks for hab_rvt_check_target()
for BootROM code using the older BootROM address layout - in my test case
the i.MX7. Code based on new BootROM callbacks will just have HAB_SUCCESS
as a result code. Adding support for the new BootROM callbacks is a TODO.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
824ef302f3 arm: imx: hab: Print additional IVT elements during debug
This patch enables printout of the IVT entry, dcd and csf data fields.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
fd15fe5f84 arm: imx: hab: Print CSF based on IVT descriptor
The IVT gives the absolute address of the CSF. There is no requirement for
the CSF to be located adjacent to the IVT so lets use the address provided
in the IVT header instead of the hard-coded fixed CSF offset currently in
place.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
04099e9ced arm: imx: hab: Only call ROM once headers are verified
Previous patches added IVT header verification steps. We shouldn't call
hab_rvt_entry() until we have done the basic header verification steps.

This patch changes the time we make the hab_rvt_entry() call so that it
only takes place if we are happy with the IVT header sanity checks.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
e59eb9e00f arm: imx: hab: Verify IVT self matches calculated address
The IVT is a self-describing structure which contains a self field. The
self field is the absolute physical base address the IVT ought to be at in
memory. Use the IVT self field to validate the calculated ivt_addr bugging
out if the two values differ.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
49b6d05882 arm: imx: hab: Add IVT header verification
The IVT header contains a magic number, fixed length and one of two version
identifiers. Validate these settings before doing anything with a putative
IVT binary.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
c5800b2541 arm: imx: hab: Fix authenticate_image input parameters
u-boot command "hab_auth_img" tells a user that it takes

- addr - image hex address
- offset - hex offset of IVT in the image

but in fact the callback hab_auth_img makes to authenticate_image treats
the second 'offset' parameter as an image length.

Furthermore existing code requires the IVT header to be appended to the end
of the image which is not actually a requirement of HABv4.

This patch fixes this situation by

1: Adding a new parameter to hab_auth_img
   - addr   : image hex address
   - length : total length of the image
   - offset : offset of IVT from addr

2: Updates the existing call into authenticate_image() in
   arch/arm/mach-imx/spl.c:jump_to_image_no_args() to pass
   addr, length and IVT offset respectively.

This allows then hab_auth_img to actually operate the way it was specified
in the help text and should still allow existing code to work.

It has the added advantage that the IVT header doesn't have to be appended
to an image given to HAB - it can be prepended for example.

Note prepending the IVT is what u-boot will do when making an IVT for the
BootROM. It should be possible for u-boot properly authenticate images
made by mkimage via HAB.

This patch is the first step in making that happen subsequent patches will
focus on removing hard-coded offsets to the IVT, which again is not
mandated to live at the end of a .imx image.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
08a81cad2f arm: imx: hab: Move CSF_PAD_SIZE to hab.h
CSF_PAD_SIZE should be defined in hab.h, move it to that location now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
191d8bd509 arm: imx: hab: Move IVT_SIZE to hab.h
The size of the IVT header should be defined in hab.h move it there now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
53c8a510e7 arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
The current code disjoins an entire block of code on hab_entry pass/fail
resulting in a large chunk of authenticate_image being offset to the right.

Fix this by checking hab_entry() pass/failure and exiting the function
directly if in an error state.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
d2c61800fc arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
There is no need to call is_enabled() twice in authenticate_image - it does
nothing but add an additional layer of indentation.

We can check for is_enabled() at the start of the function and return the
result code directly.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
9535b3975f arm: imx: hab: Fix authenticate_image result code
authenticate_image returns 1 for success and 0 for failure. That result
code is mapped directly to the result code for the command line function
hab_auth_img - which means when hab_auth_img succeeds it is returning
CMD_RET_FAILURE (1) instead of CMD_RET_SUCCESS (0).

This patch fixes this behaviour by making authenticate_image() return 0 for
success and 1 for failure. Both users of authenticate_image() as a result
have some minimal churn. The upshot is once done when hab_auth_img is
called from the command line we set $? in the standard way for scripting
functions to act on.

Fixes: 36c1ca4d46 ("imx: Support i.MX6 High Assurance Boot
authentication")

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Bryan O'Donoghue
adbb051f08 arm: imx: hab: Make authenticate_image return int
Both usages of authenticate_image treat the result code as a simple binary.
The command line usage of authenticate_image directly returns the result
code of authenticate_image as a success/failure code.

Right now when calling hab_auth_img and test the result code in a shell a
passing hab_auth_img will appear to the shell as a fail.

The first step in fixing this behaviour is to fix-up the result code return
by authenticate_image() itself, subsequent patches fix the interpretation
of authenticate_image so that zero will return CMD_RET_SUCCESS and non-zero
will return CMD_RET_FAILURE.

The first step is fixing the return type in authenticate_image() so do that
now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-14 17:26:30 +01:00
Christopher Spinrath
dbeaa1d131 ARM: imx: cm_fx6: export board and soc info to env
Like many other i.MX6 based boards, there are multiple variants of
the cm-fx6 module featuring different SoC variants. Furthermore, the
module can be paired with multiple baseboards.

At the same time modern distribution like Fedora require U-Boot to
select a proper devicetree which depends on the SoC variant and the
baseboard.

Thus, export the SoC variant and the actual board to the environment
following the conventions of other i.MX6 devices (e.g. the NXP boards)
such that the environment can select a devicetree file to load.

For now, we only know for sure that the cm-fx6 module and the SB-fx6m
baseboard amount to a Utilite Computer variant (depending on the SoC).
Further combinations may be added in the future; e.g. CompuLab's
evaluation board once someone can verify the identification string
stored in its eeprom.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-01-12 14:28:04 +01:00
Tom Rini
20b9f2eaf5 arm: imx: Rework i.MX specific commands to be excluded from SPL
The "clocks" and "bootaux" commands are only usable in full U-Boot, not
SPL, so do not link them inside of SPL.  Rework a little of the bootaux
related code to make use of __weak and declare parts of it static as
it's local to the file.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Eran Matityahu
e7528a3d74 imx7: spl: Add support for MMC3, SD3 and NAND boot devices
Signed-off-by: Eran Matityahu <eran.m@variscite.com>
2018-01-12 14:28:04 +01:00
Eran Matityahu
cd9f3ff651 imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Use only one SPL MMC device, similarly to the iMX6 code

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
2018-01-12 14:28:04 +01:00
Fabio Estevam
6a2ccd64c3 mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL
i.MX6ULL also does not have a MMDC_P1_BASE_ADDR, so do not try to
access it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <ssbabic@denx.de>
2018-01-12 14:28:04 +01:00
Stefano Babic
fb8cac9366 mx6: Support SKS-Kinkel sksimx6 Board
Board  has 1GB RAM and boots from SD Card

U-Boot SPL 2018.01-rc3-00005-ga1898b8 (Jan 02 2018 - 13:48:54)
BT_FUSE_SEL already fused, will do nothing
Trying to boot from MMC1

U-Boot 2018.01-rc3-00005-ga1898b8 (Jan 02 2018 - 13:48:54 +0100)

CPU:   Freescale i.MX6DL rev1.2 996 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 40C
Reset cause: POR
I2C:   ready
DRAM:  1 GiB
MMC:   FSL_SDHC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]

Signed-off-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Stefan Agner
46718353b2 imx: initialize and use generic timer on i.MX 6UL/ULL
The i.MX 6UL/ULL feature a Cortex-A7 CPU which suppor the ARM
generic timer. This change makes use of the ARM generic timer in
U-Boot.

This is crucial to make the ARM generic timers usable in Linux since
timer_init() initalizes the system counter module, which is necessary
to use the generic timers CP15 registers.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-08 17:33:06 +01:00
Stefan Agner
23b6a131fd imx: introduce CONFIG_GPT_TIMER
Introduce a new config symbol to select the i.MX
General Purpose Timer (GPT).

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-08 17:33:06 +01:00
Stefan Agner
616aa55d17 imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-08 17:33:06 +01:00
Fabio Estevam
290e7cfdbf mx6ull: Handle the CONFIG_MX6ULL cases correctly
Since commit 051ba9e082 ("Kconfig: mx6ull: Deselect MX6UL from
CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
take this into consideration in all the checks for CONFIG_MX6UL.

This fixes a boot regression.

Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Breno Lima <breno.lima@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
2018-01-04 16:29:04 +01:00
Eran Matityahu
af104ae5b8 imx: spl: Fix NAND bootmode detection
commit 20f1471416 ("imx: spl: Update NAND bootmode detection bit")
broke the NAND bootmode detection by checking if
BOOT_CFG1[7:4] == 0x8 for NAND boot mode.
This commit essentially reverts it, while using the IMX6_BMODE_*
macros that were introduced since.

Tables 8-7 & 8-10 from IMX6DQRM say the NAND boot mode selection
is done when BOOT_CFG1[7] is 1, but BOOT_CFG1[6:4] is not
necessarily 0x0 in this case.
Actually, NAND boot mode is when 0x8 <= BOOT_CFG1[7:4] <= 0xf,
like it was in the code before.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jagan Teki <jagan@openedev.com>
Cc: Tim Harvey <tharvey@gateworks.com>
2018-01-03 14:01:38 +01:00
Eric Nelson
baefb63a13 mx6: Add board mx6memcal for use in validating DDR
This is a virtual "board" that uses configuration files and
Kconfig to define the memory layout used by a real board during
the board bring-up process.

It generates an SPL image that can be loaded using imx_usb or
SB_LOADER.exe.

When run, it will generate a set of calibration constants for
use in either or both a DCD configuration file for boards that
use u-boot.imx or struct mx6_mmdc_calibration for boards that
boot via SPL.

In essence, it is a configurable, open-source variant of the
Freescale ddr-stress tool.

	https://community.nxp.com/docs/DOC-105652

File mx6memcal_defconfig configures the board for use with
mx6sabresd or mx6qsabreauto.

Signed-off-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 13:58:51 +01:00
Breno Lima
52384b7e5c imx: Kconfig: Add HAS_CAAM option
Currently CONFIG_SECURE_BOOT is selecting FSL_CAAM for all i.MX devices,
this causes the following error when building mx6sl boards since
this SoC doesn't have the CAAM block:

In file included from drivers/crypto/fsl/jobdesc.c:12:0:
drivers/crypto/fsl/jobdesc.c: In function 'inline_cnstr_jobdesc_blob_dek':
include/fsl_sec.h:268:25: error: 'CAAM_ARB_BASE_ADDR' undeclared (first use
in this function)
 #define SEC_MEM_PAGE1  (CAAM_ARB_BASE_ADDR + 0x1000)
                         ^
drivers/crypto/fsl/jobdesc.c:140:21: note: in expansion of macro 'SEC_MEM_PAGE1'
  memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz);
                     ^
include/fsl_sec.h:268:25: note: each undeclared identifier is reported only
once for each function it appears in
 #define SEC_MEM_PAGE1  (CAAM_ARB_BASE_ADDR + 0x1000)
                         ^
drivers/crypto/fsl/jobdesc.c:140:21: note: in expansion of macro 'SEC_MEM_PAGE1'
  memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz);
                     ^
scripts/Makefile.build:280: recipe for target 'drivers/crypto/fsl/jobdesc.o'
failed
make[3]: *** [drivers/crypto/fsl/jobdesc.o] Error 1
scripts/Makefile.build:425: recipe for target 'drivers/crypto/fsl' failed
make[2]: *** [drivers/crypto/fsl] Error 2
scripts/Makefile.build:425: recipe for target 'drivers/crypto' failed
make[1]: *** [drivers/crypto] Error 2

Add HAS_CAAM configuration to avoid this error.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Breno Lima
051ba9e082 Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
MX6UL contains features that MX6ULL doesn't support.
Deselect CONFIG_MX6UL and select SYS_L2CACHE_OFF and ROM_UNIFIED_SECTIONS.

The motivation for doing this change is that MX6UL supports CAAM and
MX6ULL does not.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Breno Lima
a4e6b0013f mx6sl: Select MX6SL option via Kconfig
Currently the MX6SL option is selected via CONFIG_SYS_EXTRA_OPTIONS,
but it is better to select it directly via Kconfig.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2017-12-29 11:18:59 +01:00
Fabio Estevam
6ca03f0dfb mx6sxsabresd: Load the correct dtb for revA board
Currently only imx6sx-sdb.dtb is loaded, but if revA board is used the
correct dtb is imx6sx-sdb-reva.dtb, so make this possible.

While at it, remove an extra 'mmc dev'.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Fabio Estevam
4555c26142 imx: Add a common way for detecting NXP boards revision
NXP development boards based on i.MX6/i.MX7 contain the board
revision information stored in the fuses.

Introduce a common function that can be shared by different boards and
convert mx6sabreauto to use this new mechanism.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-29 11:18:59 +01:00
Jagan Teki
52aaddd6f4 i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
Add new board names for existing board support
imx6q - icore and icore_rqs boards
imx6ul - geam6ul and isiot boards

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27 10:36:40 +01:00
Jagan Teki
152038ea18 i.MX6UL: icore: Add SPL_OF_CONTROL support
Add OF_CONTROL support for SPL code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27 10:36:40 +01:00
Jagan Teki
1f6e9bd2a7 i.MX6Q: icore: Add SPL_OF_CONTROL support
Add OF_CONTROL support for SPL code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-27 10:36:40 +01:00
Fabio Estevam
e2162d709f imx: Remove boolean parameter from wdog powerdown function
imx_set_wdog_powerdown() is always used to disable the power down
enable bit, so remove the boolean parameter of the function.

It is also a bit strange to write a boolean value into registers,
so this new version makes explicit that we are writing 0.

While at it, rename it to imx_wdog_disable_powerdown().

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-27 10:34:49 +01:00
Fabio Estevam
b42287f4c9 imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL
Clear powerdown enable bit for WDOG3 on i.MX6ULL to avoid unwanted
kernel reboots.

Suggested-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-27 10:34:40 +01:00
Fabio Estevam
74da017a49 mx6: Select MX6QDL option via Kconfig
Currently the MX6QDL option is selected via CONFIG_SYS_EXTRA_OPTIONS,
but it is better to select it directly via Kconfig.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20 10:01:35 +01:00
Peter Senna Tschudin
6b0071c110 mx53: Add Board support for GE PPD
Create board support for GE PPD, based on mx53loco.

Use mx53ppd_defconfig make target to configure for this board.

Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2017-11-20 09:59:02 +01:00
Lukasz Majewski
a3eec24ad3 imx:display5: Add support for LWN's DISPLAY5 board
This commit provides support for LWN's IMX6Q based DISPLAY5 board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09 11:32:49 +01:00
Fabio Estevam
b2e6ad451b mx51: Select the ESDHC_A001 erratum
When a high speed card is connected to mx51evk the following error is seen:

U-Boot 2017.11-rc2 (Oct 18 2017 - 13:49:26 -0200)

CPU:   Freescale i.MX51 rev3.0 at 800 MHz
Reset cause: POR
Board: MX51EVK
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - read failed, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC
Hit any key to stop autoboot:  0
=> saveenv
Saving Environment to MMC...
Writing to MMC(0)... failed

The root cause for the failure is the eSDHC-A001 erratum:

"eSDHC-A001 : Data timeout counter (SYSCTL[DTOCV]) is not reliable for
values of 0x4,0x8, and 0xC" that is listed
on some PowerArchitecture chips:
https://www.nxp.com/files-static/32bit/doc/errata/MPC8379ECE.pdf

Even though eSDHC-A001 is not documented on the i.MX51 errata document,
I have confirmed with the NXP design team that this erratum does affect
i.MX51, so fix the problem by selecting SYS_FSL_ERRATUM_ESDHC_A001
at SoC level.

The i.MX51 ts4800 board already selects this option, but it is better
to move this selection to the i.MX51 SoC level instead.

Successfully tested with a high speed SD card on a mx51evk board.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2017-11-07 10:13:11 +01:00
Fabio Estevam
5d09c27138 mx25: Select the ESDHC_A001 erratum
When a high speed card is connected to mx25 the following error is seen:

U-Boot 2017.11-rc2-00104-gb79372a (Oct 31 2017 - 11:02:22 -0200)

CPU:   Freescale i.MX25 rev1.2 at 399 MHz
Reset cause: POR
Board: MX25PDK
I2C:   ready
DRAM:  64 MiB
No arch specific invalidate_icache_all available!
MMC:   FSL_SDHC: 0
*** Warning - read failed, using default environment
In:    serial
Out:   serial
Err:   serial
Net:   FEC
Hit any key to stop autoboot:  0
=> saveenv
Saving Environment to MMC...
Writing to MMC(0)... failed

, which prevents any usage of the SD card.

The root cause for the failure is the eSDHC-A001 erratum:

"eSDHC-A001 : Data timeout counter (SYSCTL[DTOCV]) is not reliable for
values of 0x4,0x8, and 0xC" that is listed
on some PowerArchitecture chips:
https://www.nxp.com/files-static/32bit/doc/errata/MPC8379ECE.pdf

Even though eSDHC-A001 is not documented on the i.MX25 errata document,
I have confirmed with the NXP design team that this erratum does affect
i.MX25, so fix the problem by selecting SYS_FSL_ERRATUM_ESDHC_A001
at SoC level.

Successfully tested with a high speed SD card on a mx25pdk board.

Suggested-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Otavio Salvador <otavio@ossystems.com.br> # mx25pdk
2017-11-07 10:13:00 +01:00
Fabio Estevam
07df697e14 mx25: Move MX25 selection to Kconfig
The motivation for moving MX25 selection to Kconfig is to be
able to better handle MX25 specific errata, so that an errata option
can be selected at SoC level instead of board level.

This selection method also aligns with the way other i.MX SoCs are
selected in U-Boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2017-11-07 10:12:50 +01:00
Marek Vasut
0a333602df ARM: imx6: Add DHCOM i.MX6 PDK board support
Add support for the DHCOM i.MX6 PDK board. This board has:
- FEC ethernet
- EHCI USB host
- 3x SDMMC

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2017-10-12 18:01:06 +02:00
Ilya Ledvich
6963204c4c arm: imx7d: add support for Compulab cl-som-imx7
Add initial support for Compulab cl-som-imx7 SoM.
The initial support includes:
 - MMC
 - eMMC
 - SPI flash
 - I2C
 - FEC
 - USB
 - Serial console

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12 17:31:16 +02:00
Uri Mashiach
c5c6f37a04 imx: mx7: SPL support for i.MX7
Add configuration file and spl_boot_device function for the i.MX7 SPL.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12 17:31:16 +02:00
Uri Mashiach
258bad41ac imx: mx7: DDR controller configuration for the i.MX7 architecture
The configuration files imximage.cfg are used for the DDR controller
configuration.
Add DDR configuration function to replace the DDR controller
configuration in the imximage.cfg file. The function can be used for
DDR size detection.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12 17:31:16 +02:00
Diego Dorta
c49fa34e5b mx6: soc: Include <asm/bootm.h> header file
When compiling with W=1 the following warning is observed:

arch/arm/mach-imx/mx6/soc.c:213:12: warning: no previous prototype for ‘get_board_rev’ [-Wmissing-prototypes] u32 __weak get_board_rev(void)

Fix the build warning by including <asm/bootm.h>.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12 17:31:16 +02:00
Anatolij Gustschin
38df370182 imx6: disable clock command and print_cpuinfo code in SPL
We do not use print_cpuinfo and clock command code in SPL,
disable it when building SPL image.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-12 17:30:32 +02:00
Maxime Ripard
a95aee6af7 usb: gadget: Make g_dnl USB settings common
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.

Make them common by renaming them, and convert all the users.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03 19:12:05 +02:00
Fabio Estevam
511db3bf5a toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
Instead of having every board file to add its own g_dnl_bind_fixup()
implementation, move it to the common imx6 SPL code.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-09-20 15:34:59 +02:00
Eric Nelson
8590786acf imx: imx7d: remove CamelCase from ENET_xMHz macros
Update these macros to use all upper-case to avoid checkpatch
warnings:

	ENET_25MHz,
	ENET_50MHz,
	ENET_125MHz,

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-09-18 17:15:28 +02:00
Stefan Agner
e203dcf23e imx_common: detect USB serial downloader reliably
The current mechanism using SCR/GPR registers work well when
the serial downloader boot mode has been selected explicitly
(either via boot mode pins or using bmode command). However,
in case the system entered boot ROM due to unbootable primary
boot devices (e.g. empty eMMC), the SPL fails to detect that
it has been downloaded through serial loader and tries to
continue booting from eMMC:
  Trying to boot from MMC1
  mmc_load_image_raw_sector: mmc block read error
  SPL: failed to boot from all boot devices
  ### ERROR ### Please RESET the board ###

The only known way to reliably detect USB serial downloader
is by checking the USB PHY receiver block power state...

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2017-09-18 17:15:22 +02:00
Chris Packham
f58ad98a62 usb: net: migrate USB Ethernet adapters to Kconfig
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig.
Update defconfigs.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-08 10:23:00 -04:00
Chris Packham
ae3584498b usb: net: migrate CONFIG_USB_HOST_ETHER to Kconfig
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on
USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and
LAN78XX options under new menu. Finally update the defconfigs that need
CONFIG_USB_HOST_ETHER.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-08 10:21:46 -04:00
Jagan Teki
46668df5d0 i.MX6Q: spl: Fix falcon to use dram_init_banksize
Memory dt node update introduced by spl_fixup_fdt() in below
commit was making DDR configuration in-appropriate
to boot falcon mode. Hence added dram_init_banksize for
explicit assignment of  proper base and size of DDR.

"boot: fdt: Perform arch_fixup_fdt() on the given device tree for falcon boot"
(sha1: 6e7585bb64)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-30 12:18:26 +02:00
Stefan Agner
624da53ca8 imx: remove SATA boot mode for i.MX 6UL and 6ULL
The NXP i.MX 6UL and 6ULL do not support SATA and have no SATA
boot mode, hence remove it from the boot device detecion. This
fixes a build error introduced with 3bd1642d4d ("imx: fix USB
boot mode detection for i.MX 6UL and 6ULL")

Fixes: 3bd1642d4d ("imx: fix USB boot mode detection for i.MX 6UL and 6ULL")
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-08-30 12:17:53 +02:00
Anatolij Gustschin
ffc36f57bc imx6: don't include unneeded boot_mode array in SPL
The soc_boot_modes array is only used by bmode command
and not needed in SPL. Don't include it into SPL.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-29 09:49:51 +02:00
Anatolij Gustschin
ae64226dbe imx: timer: don't clear the GPT control register multiple times
There is no need to clear the control register 100 times in a
loop, a single zero write clears the register. I didn't find any
justification why clearing this register in a loop is needed
(no info in i.MX6 errata or GPT timer linux driver, linux driver
uses single write to clear this control register).

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2017-08-29 09:47:28 +02:00
Breno Lima
3aa4b703b4 imx: imx6: Move gpr_init() function to soc.c
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
MX6Q and MX6QP processors move it to the soc.c file.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-28 09:48:53 +02:00
Stefan Agner
962c78b1df imx: use BOOT_DEVICE_BOARD instead of UART
i.MX 6 serial downloader is not necessarily booting via UART but can
also boot from USB. In fact only some i.MX chips have serial
downloader support via UART (e.g. 6UL/ULL and Vybrid) but all of
them have serial downloader support via USB. Use the more appropriate
BOOT_DEVICE_BOARD define which is used for ROM provided recovery
mechanisms in general.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-08-25 13:31:47 +02:00
Stefan Agner
3bd1642d4d imx: fix USB boot mode detection for i.MX 6UL and 6ULL
Add the reserved boot mode used in the bmode command for i.MX 6UL
and 6ULL as introduced in commit 3fd9579085 ("imx: mx6ull: fix USB
bmode for i.MX 6UL and 6ULL").

Also replace BMODE_UART with BMODE_RESERVED, which is more appropriate.
Commit 96aac843b6 ("imx: Use IMX6_BMODE_* macros instead of numericals")
added macros for boot modes, in the process the reserved boot mode got
named BMODE_UART. We use the reserved boot mode in the bmode command to
let the boot ROM enter serial downloader recovery mode. But this is only
a side effect, the actual boot mode is reserved...

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-08-25 13:31:31 +02:00
Peng Fan
fa85b0217d imx: mx7: psci: add copyright and license
Add copyright and license header.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2017-08-23 10:45:25 +02:00
Tom Rini
1fdafb2e3d Merge branch 'master' of git://git.denx.de/u-boot-mmc 2017-08-18 18:24:36 -04:00
Simon Glass
7e0712b26e dm: sata: imx: Allow driver model to be used for sata
Update the sata call to work with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17 16:44:17 +09:00
Tom Rini
470135be27 Merge git://www.denx.de/git/u-boot-imx
Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-16 18:12:00 -04:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Simon Glass
382bee57f1 env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:22:18 -04:00
Peng Fan
e872f27a02 imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled
Fix build warning when CONFIG_IMX_RDC not defined in defconfig.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16 12:43:09 +02:00
Peng Fan
9402cafb23 imx: mx6sl: simplify code using setbits_le32
Simplify code by removing set_preclk_from_osc with directly setbits_le32.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16 12:43:09 +02:00
Peng Fan
7236297aee imx: mx6sx: select OSC as uart's clk parent
As M4 is sourcing UART clk from OSC, to make UART work
when M4 is enabled, need to select OSC as clk parent,
24M OSC is enough for debug UART in uboot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16 12:43:04 +02:00
Peng Fan
79a57b5ae1 imx: mx6: soc: fix mx6sll settings
There is not LDO_SOC/PU/ARM/MMDC1 on i.MX6SLL, also no need to gate/ungate
all PFDs to make PFD working.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16 11:56:22 +02:00
Peng Fan
3d3598d0f6 imx: mx6: select ARM_ERRATA_845369
Select ARM_ERRATA_845369 for i.MX6DQ/DL/QP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16 11:51:00 +02:00
Peng Fan
91435cd40d ARM: i.MX6: exclude the ARM errata from i.MX6 UP system
The ARM errata 751472, 794072, 761320 only applied
to the following configuration:

This erratum affects configurations with either:
- One processor if the ACP is present
- Two or more processors

i.MX6 family does not have the ACP and thus only the MPCore system
will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16 11:50:40 +02:00
Sébastien Szymanski
0c7c6fb764 imx: imx6ull: correct get_cpu_speed_grade_hz
i.MX6ULL has different speed grades than i.MX6UL.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2017-08-16 11:45:10 +02:00
Sébastien Szymanski
44e670532d imx: imx6ul: correct get_cpu_speed_grade_hz on 696MHz SoCs
Return the correct value when the speed grade is 696MHz.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2017-08-16 11:44:57 +02:00
Anatolij Gustschin
ff3a5fc46d imx6: clock: correct comment for PLL_VIDEO
This appear to be a copy-paste error, clean it up.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16 11:38:27 +02:00
Simon Glass
c1c3fe2307 env: Convert CONFIG_ENV_IS_IN... to a choice
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).

Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.

Also expand the help for the 'nowhere' option and move it to the top since
it is the default.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:01 -04:00
Simon Glass
72c3033fd1 Convert CONFIG_CMD_SPL to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_SPL

Note that trats does not actually use SPL, so this option can no-longer be
set.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11 15:41:57 -04:00
Stefano Babic
83605d37b0 mx6: Add support for Phytec pfla02 (NAND)
Add support for Phytec pfla02, equipped with NAND.

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 31C
Reset cause: POR
I2C:   ready
DRAM:  1 GiB
NAND:  2048 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected n25q128 with page size 256 Bytes, erase size 64 KiB, total
16 MiB
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Stefan Christ <s.christ@phytec.de>
CC: Stefan Müller-Klieser <S.Mueller-Klieser@phytec.de>
CC: Christian Hemp <C.Hemp@phytec.de>
2017-08-02 11:45:27 +02:00