Commit graph

3978 commits

Author SHA1 Message Date
Chaitanya Sakinam
ff64e9a9f0 armv8: ls1012a: Pass PPFE firmware to Linux through FDT
Read Linux PPFE firmware from flash partition and pass it to Linux through
FDT entry. So that we can avoid placing PPFE firmware in Linux rootfs.
(FDT may increase at max by 64KB)

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Yangbo Lu
addec3511f armv8: layerscape: enable eMMC HS400 workarounds for LX2160A/LX2162A
Enable eMMC HS400 workarounds for LX2160A/LX2162A.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Jiafei Pan
84c2e044a9 armv8: layerscape: add PSCI support for cpu release
For cpu release command, check whether PSCI is supported firstly,
if supported, use PSCI to kick off secondary cores, otherwise still
use spin table.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
[Fixed checkpatch alignment CHECKs]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-17 11:46:11 +05:30
Marek Behún
37de198fa2 armv8: SPL: discard relocation information
For some reason when building SPL for ARMv8 with LTO, the relocation
information is not discarded.

Discard it explicitly in the linker script.

This fixes LTO build for imx8mm_venice_defconfig.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Marek Behún
3cd7541f93 ARM: kona: fix clk_bsc_enable() type mismatch for LTO
When building with LTO, the compiler complains about type mismatch of
function clk_bsc_enable() in file:
  arch/arm/cpu/armv7/kona-common/clk-stubs.c
vs other files that define or use this function:
  warning: type of ‘clk_bsc_enable’ does not match original declaration.

Change the type of this function to that of the other usages.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24 14:21:30 -04:00
Marek Behún
b83120df79 ARM: fix LTO for imx28_xea
When imx28_xea_defconfig is built with LTO, the compiler complains about
the two different declarations of _start:
   include/asm-generic/sections.h    as  extern void _start(void);
   arch/arm/cpu/arm926ejs/mxs/mxs.c  as  extern uint32_t _start;

Fix this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-24 14:21:30 -04:00
Marek Behún
e5fc9037dd ARM: fix LTO build for some thumb-interwork cases
Fix LTO build for some thumb-interwork usecases (such as for
da850evm_defconfig), where inline assmebly such as
  mrc p15,0,r2,c1,c0,0
causes the compiler to fail during LTO linking with
  Error: selected processor does not support `mrc p15,0,r2,c1,c0,0'
         in Thumb mode

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Marek Behún
86c5e21013 ARM: make gd a function call for LTO and set via set_gd()
On ARM, the gd pointer is stored in registers r9 / x18. For this the
-ffixed-r9 / -ffixed-x18 flag is used when compiling, but using global
register variables causes errors when building with LTO, and these
errors are very difficult to overcome.

Richard Biener says [1]:
  Note that global register vars shouldn't be used with LTO and if they
  are restricted to just a few compilation units the recommended fix is
  to build those CUs without -flto.

We cannot do this for U-Boot since all CUs use -ffixed-reg flag.

It seems that with LTO we could in fact store the gd pointer differently
and gain performance or size benefit by allowing the compiler to use
r9 / x18. But this would need more work.

So for now, when building with LTO, go the clang way, and instead of
declaring gd a global register variable, we make it a function call via
macro.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68384

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Marek Behún
236f2ec432 treewide: Convert macro and uses of __section(foo) to __section("foo")
This commit does the same thing as Linux commit 33def8498fdd.

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24 14:21:30 -04:00
Alexandru Gagniuc
58b504e5e1 Revert "spl: Drop bd_info in the data section"
This reverts commit 38d6b7ebda.

struct global_data contains a pointer to the bd_info structure. This
pointer was populated spl_set_bd() to a pre-allocated bd_info in the
".data" section. The referenced commit replaced this mechanism to one
that uses malloc(). That new mechanism is only used if SPL_ALLOC_BD=y.
which very few boards do.

The result is that (struct global_data)->bd is NULL in SPL on most
platforms. This breaks falcon mode, since arch_fixup_fdt() tries to
access (struct global_data)->bd and set the "/memory" node in the
devicetree. The result is that the "/memory" node contains garbage
values, causing linux to panic() as it sets up the page table.

Instead of trying to fix the mess, potentially causing other issues,
revert to the code that worked, while this change is reworked.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-04-19 11:34:01 -04:00
Tom Rini
a6232e065d Merge branch '2021-04-14-assorted-vboot-improvements'
- Add ECDSA support to FIT images
- Improve FIT image loadables (incl fpga) support
- Further FIT improvements with SPL
2021-04-15 17:10:25 -04:00
Michael Walle
918c72f3f2 armv8: fsl-layerscape: spl: call spl_early_init()
DM_SERIAL needs both the device tree as well as an early heap. Thus, we
have to call spl_early_init() to initialize the memory allocator and the
setup the device tree.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:22 +05:30
Michael Walle
019438e4fd armv8: fsl-layerscape: spl: add debug UART support
To use the debug UART we have to call debug_uart_init() in the SPL. Do
so as soon as possible.

As an example, here is how you can use it on a LS1028A SoC:
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0x21c0500
CONFIG_DEBUG_UART_CLOCK=200000000

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:22 +05:30
Sean Anderson
d442f69399 common: fit: Add weak board_fit_config_name_match
Several architectures had a default board_fit_config_name_match already;
this provides a generic weak version. We default to rejecting all configs.
This will use the FIT's default config, instead of the first config. This
may result in boot failures if there are multiple configurations and the
first config is *not* the default.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2021-04-14 15:23:01 -04:00
Tom Rini
9ac8368071 arm: Remove s32v234evb board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:00 -04:00
Michael Walle
d3b745f7d0 mmc: fsl_esdhc: add pulse width detection workaround
HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a
workaroung for the pulse width detection. Apply this workaround in
u-boot, too.

This will make HS400 mode work reliably on the LS1028A SoC.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:36:04 +08:00
Michael Walle
bd7b8505f2 mmc: fsl_esdhc: add workaround for erratum A-011334
LS1028A SoCs are restricted in what divider values are allowed for HS400
mode. This is basically a port from the corresponding linux driver.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06 18:35:55 +08:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Rajesh Bhagat
504debcd8c configs: fsl: move bootrom specific defines to Kconfig
Moves below bootrom specific defines to Kconfig:

    CONFIG_SYS_FSL_BOOTROM_BASE
    CONFIG_SYS_FSL_BOOTROM_SIZE

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:41 +05:30
Patrick Delaunay
8ca0f51c59 arm: cp15: remove weak function arm_init_domains
Remove the unused weak function arm_init_domains used to change the
DACR value.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-02 15:53:37 -05:00
Harald Seiler
35b65dd8ef reset: Remove addr parameter from reset_cpu()
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00
Simon Glass
c5819701a3 image: Adjust the workings of fit_check_format()
At present this function does not accept a size for the FIT. This means
that it must be read from the FIT itself, introducing potential security
risk. Update the function to include a size parameter, which can be
invalid, in which case fit_check_format() calculates it.

For now no callers pass the size, but this can be updated later.

Also adjust the return value to an error code so that all the different
types of problems can be distinguished by the user.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Bruce Monroe <bruce.monroe@intel.com>
Reported-by: Arie Haenel <arie.haenel@intel.com>
Reported-by: Julien Lenoir <julien.lenoir@intel.com>
2021-02-15 22:31:52 -05:00
Tom Rini
2ae80437fb Merge branch '2021-02-02-drop-asm_global_data-when-unused'
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15 10:16:45 -05:00
Tom Rini
2ce7b65d6d arm: Remove ls2080a_simu board
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15 10:11:38 -05:00
Hou Zhiqiang
19dba8bf9f armv7: ls102xa: Enable I-Cache to speed up the boot time
Enable the I-Cache to speed up the boot time, especailly for the NOR
boot, currently it takes about 15 seconds from power up to the U-Boot
prompt, and with the I-Cache enabled it only takes around 2.5 seconds.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:19 +05:30
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Pali Rohár
e18bf3943b arm: Remove #include <version.h> from armv8/fwcall.c
No version information is used in armv8/fwcall.c therefore do not include
version.h header file. This change prevents recompiling fwcall.o when
SOURCE_DATE_EPOCH changes.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-01 16:32:06 -05:00
Jernej Skrabec
3d594efdd0 sunxi: Add H616 FEL support
H616 uses different address for reset. Add it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25 21:52:01 +00:00
Peng Fan
0634b374ae armv8: Makefile: build cache files when needed
If no need cache support, not build the cache files, such as in SPL.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-16 19:17:11 -05:00
Andre Przywara
0e4d5db4e0 sunxi: Add arm64 FEL support
So far we did not support the BootROM based FEL USB debug mode on the
64-bit builds for Allwinner SoCs: The BootROM is using AArch32, but the
SPL runs in AArch64.
Returning back to AArch32 was not working as expected, since the RMR
reset into 32-bit mode always starts execution in the BootROM, but not
in the FEL routine.

After some debug and research and with help via IRC, the CPU hotplug
mechanism emerged as a solution: If a certain R_CPUCFG register contains
some magic, the BootROM will immediately branch to an address stored in
some other register. This works well for our purposes.

Enable the FEL feature by providing early AArch32 code to first save the
FEL state, *before* initially entering AArch64.
If we eventually determine that we should return to FEL, we reset back
into AArch32, and use the CPU hotplug mechanism to run some small
AArch32 code snippet that restores the initially saved FEL state.

That allows the normal AArch64 SPL build to be loaded via the sunxi-fel
tool, with it returning into FEL mode, so that other payloads can be
transferred via FEL as well.

Tested on A64, H5 and H6.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Priit Laes <plaes@plaes.org> (on Olimex A64-Olinuxino)
2021-01-11 23:19:34 +00:00
Tom Rini
b11f634b1c Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
 dtoc: Tidy up and add more tests
 ns16550 code clean-up
 x86 and sandbox minor fixes for of-platdata
 dtoc prepration for adding build-time instantiation
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl/09LURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebjwwf/fHRjYsAY/Yj/+y1xgo3L3sphIvQUqTDF
 KkLl+kHdV5r8W/HJULxLQcF2r7pcPEI6TAQxuj3qQ5SUvm2HviS8GHGPawDEwyht
 HgBp9VD56+HUadMfnbG//DVS73ycbL4XSKlYqpkINEejtnlttsCIawUXX5cTyGM/
 59VkgnKrKvJQRUXvYLa8MTugTs4fkPJGDqhActBk/7SP1SImj+rfalNSqA2/dx6y
 2RnPCSzB1x2231KSj+B1NgGlR3Xb8P8zgh20ijcEU/hrlXBTZyi7K7f4SJR30Efu
 LYkkuj4VbxcV/25RozR0fmknqCs0QyAI+/dql6TNtbTSPC/jAfj0jQ==
 =9kN3
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into next

Driver model: make some udevice fields private
Driver model: Rename U_BOOT_DEVICE et al.
dtoc: Tidy up and add more tests
ns16550 code clean-up
x86 and sandbox minor fixes for of-platdata
dtoc prepration for adding build-time instantiation
2021-01-05 22:34:43 -05:00
Tom Rini
720620e691 Prepare v2021.01-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAl/0YVIACgkQFHw5/5Y0
 tywtEwv/cJWlKgcSnYjuJrxwuJdauUTfXdbUgtCxOtBw/BP4dsKkbGTJPw5q5M+4
 LJJSKyksmJVTX26h1dpkzQjOpWtTDnWqm5CTIxD52oQD7pxK+zCQ9T6S+QbQD0Se
 ogHmZluzFoluxbNgo8tiO52xvMhDO3TVAzxsNDdGfkd5/tAXOHClPc34RmAkdRHU
 VsR89AKdT2q543fiUfrRZYDzdctaNWhRGXMDcJ4+QU/8hQhrpcr8EtHbF+3mWX4K
 pA01pDz150Rn4UI6S2xKEWrjSTHe55fxVj/Qj0rq9z2E/+NqGXemf5s13AR0G/z3
 PqHdVLHzDe64pbOvmyU1pVQ0aMb8vMJUnqx68SQZY3On2c+MjRWQ+7aVVaKOcPGp
 uatk6QMrggHp3Li+3yZrLBE0qPr/sNMVb7mUesdZb6lFd2VIs8siwhfeGXMS+nDI
 xePzsR43Fnn5Q5KIqqvcWUb+TTTqUDUff0wyAU8NBgCaIBIZK8h2ppS1jjnbms0I
 mr8Er2vb
 =Dfum
 -----END PGP SIGNATURE-----

Merge tag 'v2021.01-rc5' into next

Prepare v2021.01-rc5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05 16:20:26 -05:00
Simon Glass
0fd3d91152 dm: Use access methods for dev/uclass private data
Most drivers use these access methods but a few do not. Update them.

In some cases the access is not permitted, so mark those with a FIXME tag
for the maintainer to check.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-01-05 12:24:40 -07:00
Simon Glass
38d6b7ebda spl: Drop bd_info in the data section
This uses up space in the SPL binary but it always starts as zero. Also
some boards cannot support data in TPL (e.g. Intel Apollo Lake).

Use malloc() to allocate this structure instead, by moving the init a
little later, after malloc() is inited. Make this function optional since
it pulls in malloc().

This reduces the TPL binary size on coral by about 64 bytes

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:24:40 -07:00
Aleksandar Gerasimovski
2ef53647d1 arm: ls102xa: select USB PHY erratum's only if USB is enabled
The USB support is not by default enabled on all designs, so it does not
make seance to have USB specific erratum's enabled on such a designs.

On our internal Hitachi-Powergrids design not using the USB controller
there is a crash when accessing those specific memory locations selected
by the erratum flags.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Alban Bedel
cbf77d2018 armv8: fsl-layerscape: Fix automatic setting of bootmcd with TF-A
When booting from TF-A there is a logic that attempt to detect if the
default environment is used, if this is the case it then set the
`bootcmd` and `mcinitcmd` depending of the device we booted from.
This detection logic is dubious as it access internals of the env
implementation and it doesn't always work correctly.

First of all it detect any valid environment as not being the
default, so after running `env default -a && saveenv` the board
doesn't boot anymore as `bootcmd` is then empty.
But it also fails in some other ways, for example it always detect a
default environment when redundant env is enabled on MMC, so in that
case `bootcmd` is overwritten on every boot.

Instead of increasing the complexity of the detection just check if
`bootcmd` and `mcinitcmd` are set in the environment and set them if
they are not.

Signed-off-by: Alban Bedel <alban.bedel@aerq.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Priyanka Singh
03d095e87d layerscape: fdt.c: Check for NULL return value from fdt_getprop()
Check for NULL return value from fdt_getprop() in
fdt_fixup_remove_jr()

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
[Fixed checkpatch errors/warnings]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Meenakshi Aggarwal
3a187cff7a armv8: lx2162a: Add Soc changes to support LX2162A
LX2162 is LX2160 based SoC, it has same die as of LX2160
with different packaging.

LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module,
microSD card, eMMC support, serial console, qspi nor flash, qsgmii,
sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes
interface to support three PCIe gen3 interface.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
[Fixed whitespace errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10 13:56:39 +05:30
Michael Walle
8084e918bc armv8: layerscape: don't initialize GIC in SPL
The BL31 expects the GIC to be uninitialized. Thus, if we are loading
the BL31 by the SPL we must not initialize it. If u-boot is loaded by
the SPL directly, it will initialize the GIC again (in the same
lowlevel_init()).

This was tested on a custom board with SPL loading the BL31 and jumping
to u-boot as BL33 as well as loading u-boot directly by the SPL. In case
the ATF BL1/BL2 is used, this patch won't change anything, because no
SPL is used at all.

Signed-off-by: Michael Walle <michael@walle.cc>
2020-12-04 16:09:06 -05:00
Michael Walle
59b07a257c treewide: use CONFIG_IS_ENABLED() for ARMV8_SEC_FIRMWARE_SUPPORT
There is SPL_ARMV8_SEC_FIRMWARE_SUPPORT and ARMV8_SEC_FIRMWARE_SUPPORT.
Thus use CONFIG_IS_ENABLED() instead of the simple #ifdef.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2020-12-04 16:09:05 -05:00
Michael Walle
4eecc6f1a1 armv8: layerscape: don't remove crypto node if just partially disabled
On all newer Layerscape SoCs, only the export-controlled ciphers of the
crypto module are disabled on non-E parts. Thus it doesn't make sense to
completely remove the node. Linux will figure out what is there and what
is not.

Just remove it for older SoCs, where the module is indeed completely
disabled on non-E parts.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Razvan Ionut Cirjan
c760095adb net: lx2160a.c: Update to set ECx_PMUX precedence
As per hardware documentation, ECx_PMUX has precedence
over SerDes protocol.
For LX2160/LX2162 if DPMACs 17 and 18 are enabled as SGMII
through SerDes protocol but ECx_PMUX configured them as RGMII,
then the ports will be configured as RGMII and not SGMII.

Signed-off-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Laurentiu Tudor
2a5bbb13cc pci: layerscape: add a way of specifying additional iommu mappings
In the current implementation, u-boot creates iommu mappings only
for PCI devices enumarated at boot time thus does not take into
account more dynamic scenarios such as SR-IOV or PCI hot-plug.
Add an u-boot env var and a device tree property (to be used for
example in more static scenarios such as hardwired PCI endpoints
that get initialized later in the system setup) that would allow
two things:
 - for a SRIOV capable PCI EP identified by its B.D.F specify
   the maximum number of VFs that will ever be created for it
 - for hot-plug case, specify the B.D.F with which the device
   will show up on the PCI bus
More details can be found in the included documentation:
  arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Tom Rini
e1f306c07c arm: fsl-layerscape: Include device_compat.h in soc.c
Necessary for dev_xxx.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-16 09:44:27 -04:00
Andre Przywara
9a984f100e arm64: PIE: Skip fixups if distance is zero
When the actual offset between link and runtime address is zero, there
is no need for patching up U-Boot early when running with
CONFIG_POSITION_INDEPENDENT.

Skip the whole routine when the distance is 0.

This helps when U-Boot is loaded into ROM, or in otherwise sensitive
memory locations.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2020-10-08 11:42:36 -04:00
Tom Rini
b7e7831e5d Merge branch 'next'
Bring in the assorted changes that have been staged in the 'next' branch
prior to release.

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-05 14:10:59 -04:00
Meenakshi Aggarwal
d31f3a1b62 armv8: lx2160a: fix reset sequence
Make sure that SW_RST_REQ and RST_REQ_MSK are cleared
before triggering hardware reset request.

Signed-off-by: Thirupathaiah Annapureddy <thiruan@linux.microsoft.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 20:57:32 +05:30
Hou Zhiqiang
af288cb291 arm64: Layerscape: Survive LPI one-way reset workaround
The workaround of LPI one-way reset issue is broken by the series:
https://patchwork.ozlabs.org/project/uboot/list/?series=192398

This patch is to add DT node for GIC RD tables and create corresponding
reserved-memory node in kernel DT to fix it.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 20:57:32 +05:30
Ran Wang
223c19076f fsl-layerscape: enable dwc3 snooping feature
Configure DWC3’s cache type to ‘cacheable’ for better
performance. Actually related register definition and values are SoC
specific, which means this setting is only applicable to Layerscape SoC,
not generic for all platforms which have integrated DWC3 IP.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 20:57:32 +05:30
Edgar E. Iglesias
28c851f128 arm64: Add support for larger PIE U-Boot
Linking a U-Boot larger than 1MB fails with PIE enabled:
u-boot/arch/arm/cpu/armv8/start.S:71:(.text+0x3c): relocation
truncated to fit: R_AARCH64_ADR_PREL_LO21 against symbol `__rel_dyn_end'
defined in .bss_start section in u-boot.

This extends the supported range by using adrp & add to load symbols
early while starting up.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-22 12:47:28 +02:00