Commit graph

7104 commits

Author SHA1 Message Date
Sean Anderson
b935d19066 cmd: xtrace: Convert to bool
This variable is a boolean, not a string.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-12 17:17:11 -04:00
Peter Robinson
bedab97a21 Tegra: remove e2220-1170 board
It's an old bringup board with out upstream Linux or L4T support

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2021-04-12 17:17:11 -04:00
Dario Binacchi
5532262d46 test: pinmux: add test for 'pinctrl-single' driver
The test adds two pinmux nodes to the device tree, one to test when a
register changes only one pin's mux (pinctrl-single,pins), and the other
to test when more than one pin's mux is changed (pinctrl-single,bits).
This required replacing the controller's register access functions when
the driver is used on sandbox.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 11:17:15 +05:30
Adam Ford
099c9a47c9 configs: omap35_logic_somlv: Fix MMC booting
A previous patch had removed the GPIO nodes from being built
into the SPL Device tree, but CONFIG_SPL_GPIO_SUPPORT remained
which makes the MMC card detect fail and the board does not boot.
Fix this by disabling CONFIG_SPL_GPIO_SUPPORT.

Fixes: 6f1efe81aa ("configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL size")
Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-12 08:38:49 +05:30
Tom Rini
d3cfc474b7 ppc: Remove MPC837XEMDS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 14:33:35 -04:00
Tom Rini
a99dab1d33 ppc: Remove Cyrus_P5020 and P5040 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.  As the P5020 is the last ARCH_P5020 platform, remove that
support as well.

Cc: Andy Fleming <afleming@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10 08:05:07 -04:00
Tom Rini
a84ea228bc ppc: Remove controlcenterd boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:55 -04:00
Tom Rini
7c964c3b93 ppc: Remove gdsys hrcon boards
These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
ce4ca2b739 ppc: Remove gdsys strider boards
These boards have not been converted to CONFIG_DM_MMC, along with other
DM conversions, by the deadline.  Remove them.

Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
ddfb9aef65 ppc: Remove MPC8308RDB board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
2322b9568f ppc: Remove T2081QDS board and ARCH_T2081 support
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  It is also the only ARCH_T2081 board so remove that support
as well.

Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:04:42 -04:00
Tom Rini
37d14f3b6e arm: Remove tqma6s_wru4_mmc config
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
4bbcec08eb arm: Remove mx6dlarm2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Cc: Ye Li <ye.li@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
178d70b5b3 arm: Remove cgtqmx6eval board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
defd0dcfb9 arm: Remove titanium board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
80b386abe3 arm: Remove ts4800 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:55 -04:00
Tom Rini
4d24862848 arm: Remove mx53evk board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
397a43dc56 arm: Remove pfla02 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:30 -04:00
Tom Rini
a0cacddcaf arm: Remove zc5202 and zc5601 boards
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:03:29 -04:00
Tom Rini
ddfc004009 arm: Remove xpress board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:02:03 -04:00
Tom Rini
b3b0680ec3 arm: Remove kc1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
6d426bb173 arm: Remove am3517_crane board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Nagendra T S  <nagendra@mistralsolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
7db3958f07 arm: Remove omap3_ha board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Cc: Tapani Utriainen <linuxfae@technexion.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
d137604c20 arm: Remove tricorder board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Thomas Weber <weber@corscience.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:24 -04:00
Tom Rini
96f599009a arm: Remove platinum_picon board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:10 -04:00
Tom Rini
da42646bf4 arm: Remove Broadcom Cygnus boards
These boards have not been converted to CONFIG_DM by the deadline.
Remove them.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
938c174738 arm: Remove bcm23550_w1d board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
0f6807e77b arm: Remove bcm28155_ap board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Steve Rae <steve.rae@raedomain.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
65a591f639 arm: Remove picosam9g45 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Erik van Luijk <evanluijk@interact.nl>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
80c642f16d arm: Remove wb50n board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
3cb80c73a8 arm: Remove wb45n board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
d59bc09d82 arm: Remove bcm958712k board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:09 -04:00
Tom Rini
9ac8368071 arm: Remove s32v234evb board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:01:00 -04:00
Tom Rini
56124508ce arm: Remove secomx6quq7 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:45 -04:00
Tom Rini
c6c26a05b8 arm: Remove vexpress_ca15_tc2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:12 -04:00
Tom Rini
4652bef1b6 arm: Remove apf27 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
be3dec48b0 arm: Remove ts4600 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:35 -04:00
Tom Rini
0fa6bafa89 arm: Remove sc_sps_1 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
b40186fc7e arm: Remove SANSA_FUZE_PLUS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:34 -04:00
Tom Rini
539fba2c10 arm: Remove xfi3 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Tom Rini
a80e03683b drivers: ata: Remove mvsata_ide driver
The mvsata_ide driver was due for DM conversion by v2019.07.  As that
has long passed, remove the driver and disable it in the boards which
had enabled it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:59:30 -04:00
Tom Rini
34af2da9ad ppc: Remove MPC8349ITX board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:58:22 -04:00
Tom Rini
c861d21cba arm: Remove ot1200 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  In order to
convert to using the DWC SATA driver under DM further migrations are
required.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-04-10 07:57:42 -04:00
Tom Rini
d8d3b77fc2 arm: Remove dms-ba16 board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI.  The
deadline for this conversion was the v2019.07 release.  The use of CONFIG_AHCI
requires CONFIG_DM.  The deadline for this conversion was v2020.01.  Remove
this board.

Cc: Akshay Bhat <akshaybhat@timesys.com>
Cc: Ken Lin <Ken.Lin@advantech.com.tw>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:57:29 -04:00
Tom Rini
f9836dabd8 am57xx_hs_evm_usb: Enable AHCI and BLK
Enable the AHCI and BLK features to complete migration of various
drivers.

Cc: Andrew F. Davis <afd@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:53:50 -04:00
Tom Rini
a61b538af8 ls1012aqds_tfa_SECURE_BOOT: Remove unused CONFIG_SCSI_AHCI
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 07:53:50 -04:00
Tom Rini
3f2e3c7845 Add rt-thread art-pi board support based on STM32H750 SoC
Add Engicam i.Core STM32MP1 SoM
 Add FIP header support for STM32programmer
 Update uart number when no serial device found for STM32MP1
 Remove board_check_usb_power function when ADC flag is not set
 Update SPL size limitation for STM32MP1
 Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmBwTr0cHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/plSwD/9SAhxTYqAblFZqZmJj
 Lu+F5fwuXXd8S5LwqNeIKULv+UhJngClkE4HdjSl6T0yR10v6YkPNRDVj4+1gzBd
 wZizmCsnqqDW0QGsTO5AVo+oTwhX4RHkvxEF7BjOqtVuoMZGiozE53+29QORHTnZ
 +j8CYAeORf9wvGAi5y+Wr8ICqP6HwPJPNlta4S8iYC867BM38R9evBqynlaZaWPE
 8FhaXwbAj9ZR9ifCiO+7ObgfXGDT63ejCecjE+539m3FWlBrn+/AWLsg4zF037Dw
 DcV324pnVFP4AIOVsuc9hF7luAYctoXQcNHt1QbD3gmWqPQAgpH8Llfq5cMyudza
 /m/112Y7fuLxO3F14DzZSj5l3ims0XG56Yg7zBwN6exDPr3iWA4UwTSH9lRJDnBq
 aJyvLfAFAvz+X15oePjrQrVp7c+6MigeY2nmhVCWV53Yrl+/TnnekQXlHJ3TsHED
 bPW5/LarLge18uACTZvLzYruIvDSU3INPP1W0vUu7YMDwuEp21K1GSspN7yA0yDK
 nrWXxmYJGVWanAEvW//zuuqUhxtNjAb/qIQl0UgjFN9cDT5vJZ7oY3nWOwP+0V2a
 o+qrRxBTWSVliOShYpfjyHRsASRna2QLLUNQaBeoUqZBKNnFvuw4LZzmqNvV+Idj
 +XWRCiSDJnf1zRrMwFLvZZ+UTQ==
 =4VxR
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210409' of https://source.denx.de/u-boot/custodians/u-boot-stm

Add rt-thread art-pi board support based on STM32H750 SoC
Add Engicam i.Core STM32MP1 SoM
Add FIP header support for STM32programmer
Update uart number when no serial device found for STM32MP1
Remove board_check_usb_power function when ADC flag is not set
Update SPL size limitation for STM32MP1
Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
2021-04-09 13:10:59 -04:00
Tom Rini
92c4eb7ae3 Merge branch 'v2021.07-rc1' of https://github.com/lftan/u-boot 2021-04-09 13:10:38 -04:00
Tom Rini
a1e95e3805 u-boot-imx-20210409
-------------------
 
 - Secure Boot :
 	- HAB for MX8M / MX7ULP
 	- CAAM fixes
 - Fixes for imxrt1020
 - Fixes for USDHC driver
 - Fixes for Toradex (Colibri / Apalis)
 - Switch to DM for several boards
 	- mx23 olinuxo
 	- usbarmory
 	- marsboard / riotboard
 	- Gateworks GW Ventana
 - NXP upstream patches (LPDDR / CAAM / HAB)
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYHA8Xg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76aVbQCfb0Z+N836ZSAodyLa0t6FSHgKqfYAnRdrWQAv
 MNlGOmmpfHENtE75eSnd
 =g48D
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20210409' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20210409
-------------------

- Secure Boot :
	- HAB for MX8M / MX7ULP
	- CAAM fixes
- Fixes for imxrt1020
- Fixes for USDHC driver
- Fixes for Toradex (Colibri / Apalis)
- Switch to DM for several boards
	- mx23 olinuxo
	- usbarmory
	- marsboard / riotboard
	- Gateworks GW Ventana
- NXP upstream patches (LPDDR / CAAM / HAB)

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
2021-04-09 10:08:52 -04:00
Jagan Teki
0441b48570 board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.

Linux dts commit details:

commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
fd4dc09a4c board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.

Genaral features:
- Ethernet 10/100
- USB Type A
- Audio Out
- microSD
- LVDS panel connector
- Wifi/BT (option)
- UMTS LTE with sim connector (option)

MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.

MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.

Linux dts commit details:

commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 board")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
b594ec89fb board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.

Linux dts commit details:

commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
Jagan Teki
30edf40fa8 board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.

Linux dts commit details:

commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")

Add support for it.

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09 11:53:00 +02:00
dillon min
38ac6a1bb3 board: Add rt-thread art-pi board support
All these files are add for support rt-thread art-pi board
- add board/st/stm32h750-art-pi, defconfig, header support for u-boot

for more information about art-pi, please goto:
https://art-pi.gitee.io/website/

Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09 11:53:00 +02:00
Trevor Woerner
52bbcc340a mx23_olinuxino: convert MMC to driver model
Convert the Olimex Olinuxino board's support for MMC to driver model following
Fabio Estevam's excellent example from:

	commit: 23013aa961:
	mx23evk: Convert to driver model

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-08 23:59:50 +02:00
Trevor Woerner
123526e4a4 mx23_olinuxino: enable device tree
Add the dts file for the Olimex Olinuxino from the linux kernel, and enable
its use in this machine's defconfig.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-08 23:59:50 +02:00
Peter Robinson
dec7755c44 ARM: imx: udoo: convert to DM_ETH
Convert the UDOO board to use DM_ETH.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
2d0401b118 ARM: imx: udoo: Convert block devices to DM
Enable DM block, DM MMC and DM SATA support on iMX6 Udoo
convert board code to match the DM support.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
41a6890d3d ARM: imx: udoo: drop MTD config
The UDOO doesn't have any MTD storage so drop the config.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
999f6bf50d ARM: imx: udoo: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6 based Udoo boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
05cd77611f ARM: embestmx6boards: convert the mars/riot boards to DM SPI
Enable DM_SPI and DM_SPI_FLASH on the mars/riot boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
2668e28213 ARM: embestmx6boards: convert mars/riot boards to DM_ETH
Convert the boards to use DM_ETH.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
ed3b1d9c8c ARM: embestmx6boards: convert mars/riot boards to DM_USB
Convert the marsboard/riotboard to use DM_USB.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
c32d240f70 ARM: embestmx6boards: convert the mars/riot boards to DM_MMC
Convert the two Embest boards to use DM MMC.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
10ce58c081 ARM: riotboard: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6D based riotboard.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
f3bd944817 ARM: embestmx6boards: merge the riotboard's configs together
It doesn't make much sense to have two separate configs for
the riotboard so let's merge the SPL config into the main one
for less duplication.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Peter Robinson
b5c6019dfc ARM: marsboard: Enable OF_CONTROL and DM gpio/pin control
Enable OF_CONTROL and DM for gpio and pin control support
on the i.MX6Q based embestmx6boards marsboard.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:54 +02:00
Adam Ford
8166bb2428 configs: imx8mn_beacon: Enable QSPI Support
There is a QSPI chip connected to the FSPI.  Enable the defconfig
to support it.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-08 20:29:53 +02:00
Peter Robinson
f980299004 ARM: board: usbarmory: Convert to OF_CONTROL and DM
Convert usbarmory to OF_CONTROL and DM for gpio, pin
usb support on the i.MX53 based usbarmory.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Andrej Rosano <andrej@inversepath.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-04-08 20:29:53 +02:00
Tim Harvey
ca3ac1e32a imx: ventana: enable dm for SPI
Enable driver model for SPI which allows us to remove the iomux
and init.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
777f333c37 imx: ventana: enable dm for MTD and NAND
Enable driver model for MTD and NAND support allowing us to remove
the iomux, init, and most of the static configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
19a387f85d imx: ventana: enable dm support for MMC and SATA
Enable driver model support for MMC and SATA.

Note that DM_MMC requires aliases for your mmc devices so
they are added to the dts. Linux does not support enumerating mmc
devices by alias so these are not present in the Linux dts.

Note that we still need board_mmc_init() and board_mmc_getcd() for
not DM SPL to support MMC.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
72c46327f0 imx: ventana: enable dm support for USB
Enable dm support for USB (which also requires dm support for fixed
regulators used for vbus enable) and remove usb iomux which is no
longer needed.

We can remove the handling of otgpwr_en gpio as this is defined in
dt as usbotg vbus-supply but we need to keep the handling of
USB_HUB_RST# for boards that have a USB HUB as that isn't defined in
the dt's currently.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
ee025c13b2 imx: ventana: add pinctrl and remove unneeded UART init and config
Once the IMX6 pinctrl driver is added UART is fully using driver mode
so we no longer need to config and initialize it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Tim Harvey
d863d05439 imx: ventana: convert U-Boot to OF_CONTROL using FIT image
In preparation for dm conversion convert to OF_CONTROL by adding FIT image
support and multi dtb.

Add a board_fit_config_name_match to match the dtb based off of EEPROM
model.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08 20:29:53 +02:00
Peng Fan
1e4ed2d69d imx8mp-evk: switch to use binman
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
d6afc6b3a0 imx8mn-evk: switch to use binman
Use binman to pack images.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
353dfe4b43 imx8mn-ddr4-evk: switch to use binman
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Peng Fan
8996e6b7c6 imx8mm_evk: switch to use binman to pack images
Use binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 20:29:53 +02:00
Tom Rini
f6127db8cc Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
- Watchdog, Unleashed and Icicle improvements
2021-04-08 07:33:14 -04:00
Siew Chin Lim
cdca986070 arm: socfpga: Enable FIT signature with crc32 for SOC64 devices
Add signature with crc32 value for all images in binman node for FIT
image in device tree. And, enable FIT signature checking for Stratix10
and Agilex ATF and VAB sdmmc boot.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08 17:29:13 +08:00
Bin Meng
e9b62617fa riscv: mpfs-icicle-kit: Increase SYS_MALLOC_F_LEN
The RISC-V architecture default value of CONFIG_SYS_MALLOC_F_LEN
(0x1000) would not provide enough memory for devices like mpfs
clock and ns16550 serial to bind well before relocation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08 15:37:29 +08:00
Bin Meng
ae2d9506a3 riscv: sifive: Rename fu540 board to unleashed
In preparation to add SiFive Unmatched board support, let's rename
the existing fu540 board to unleashed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08 15:37:29 +08:00
Heinrich Schuchardt
be5c442a15 configs: EXT4, FAT, hush shell, env on S-mode MAIX
* enable storing the environment in the SPI flash
* enable EXT4 and FAT file system
* enable hush shell
* run k210_bootcmd as default boot command

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-04-08 15:37:28 +08:00
Peng Fan
4e805c197b imx8mn: Add LPDDR4 EVK board support
Add support for iMX8MN LPDDR4 EVK board which uses 2GB LPDDR4 and
PCA9450B PMIC.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Ye Li
48ddafd9a4 imx8mm_evk: Switch to new imx8mm evk board
Update PMIC to use PCA9540, the legacy board not supported by NXP

Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-08 09:18:29 +02:00
Harm Berntsen
b5293df17a configs: sheevaplug: enable driver-model based MMC
The non-dm MMC driver has been converted to the driver model. The
sheevaplug was using the non-dm driver and this commit enables the new
driver.

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
Reviewed-by: Stefan Roese <sr@denx.de>
CC: Prafulla Wadaskar <prafulla@marvell.com>
CC: Stefan Roese <sr@denx.de>
CC: Tom Rini <trini@konsulko.com>
2021-04-08 08:50:52 +02:00
Phil Sutter
a770159f88 arm: mvebu: ds414: Auto-populate env if appropriate
Define a misc_init_r() which calls "syno populate_env" if the
environment seems incomplete (or default), indicated by missing
"ethaddr" variable. With this in place, no random MAC address fallback
is needed anymore.

Signed-off-by: Phil Sutter <phil@nwl.cc>
2021-04-08 08:50:41 +02:00
Phil Sutter
e471ddf0f3 arm: mvebu: board/Synology: Unify legacy kernel support
Move the relevant bits from ds109.{c,h} into common/ and adjust the code
to fit both DS109 and DS414. Moreover:

* Introduce syno_board_id() which translates CONFIG_MACH_TYPE into the
  expected board ID tag value.

* Properly initialize isusbhost, mac and mtu fields from env variables.

* Set the right bootargs/bootcmd to correctly boot legacy kernel out of
  the (DS414) box. Getting the ramdisk location right is a bit tedious.

Cc: Walter Schweizer <swwa@users.sourceforge.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08 08:50:17 +02:00
Phil Sutter
c57f920504 arm: mvebu: configs: ds414: Enable XHCI_PCI by default
With the recent fixes in pci_mvebu and xhci-pci drivers, the two rear
USB3 ports are finally usable and accessing them no longer hangs the
system.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08 08:50:12 +02:00
Marek Behún
d86609baab arm: mvebu: turris_omnia: Enable CMD_FS_UUID
This command can be useful for U-Boot scripts.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08 08:44:51 +02:00
Marek Behún
33691d9c82 arm: mvebu: turris_omnia: Enable CMD_WDT
This command can be sometimes used for debugging.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08 08:44:51 +02:00
Marek Behún
1972d58e97 arm: mvebu: turris_omnia: Enable DM_RTC and RTC_ARMADA38X
With this the date command is available on Turris Omnia.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08 08:44:51 +02:00
Tom Rini
02395fec00 Merge tag 'mmc-2021-4-6' of https://source.denx.de/u-boot/custodians/u-boot-mmc
Update hwpartition usage
Check bootbus's arguments
workaround for erratum A-011334 for fsl_esdhc driver
add pulse width detection workaround for fsl_esdhc driver
Use alias num before checking mmc index when creating device
2021-04-06 22:42:55 -04:00
Tom Rini
1883652c8e - Add MMIO MDIO mux driver
- Add Amlogic G12A MDIO mux driver
 - Add DM_MDIO support for designware ethernet driver
 - Add Amlogic Meson8b and later designware ethernet glue driver
 - Switch all amlogic boards to Amlogic designware ethernet glue driver
 - Switch all amlogic boards to DM_MDIO when necessary
 - Remove all static ethernet setup code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmBsLu8ACgkQd9zb2sjI
 SdFj4RAArL8OHCGzyAXrV95fnOnl76koOFnJJ0q6PREwvLWQh3GMpN4CBYtAn95a
 nbakXGN30pHlprrRrYi8nsGHWJX2MW1k8hDWGUJ4f+r2AuvCxMT7h3CHbKY0/pKZ
 h8s7Kwy1ze53ljAbQBUnF3anzYJFPpX3nvjbNo2o5ao0gCUNilEuz1RVn2R72v8R
 kp1iZb0bBhMN3mmNeOs670oXyDoRtX4eWyhbAdrTDhofxTvxfRlQJQrxJ6/I90ex
 IueCsRaT40vl9B5I+JJsanJFDPUTFeZIAc/6DchqPVlXxQjLYP/RjUIxaZbAbnFc
 vyXSWYhoK4GAmgNmXzL00VUVLfKvWvMVMncSgRKRqVY+YBkmoFrP4sYbFrZAPqsB
 yaUoWWnuKurWGRiqbEOlvK+AmQ7So0wWLE/cImmHaadpUDFow3JseeMdZphBdaOp
 4BevvSUNE2k8LazXKyPPlm73Po7uDZmTHYc9ADemBjIj0wvdROvgTdbOdtCAPwnv
 sNVP08l51fskueFYKAkWg1/5hu9YEqzb3C+n9QyZoDNmKaGxQ102HH2gHdXkFqBD
 EciaThsIogUOxYzz7zwU4a44bzzQBuh+yp6C4Ixxe9tOyFyknNppontMUUm41Blk
 HzOvBZjzxqpQOnuVfl1k7xORFXGehCnxwLhZvDIoLYhaqFzgLUc=
 =uQEZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20210406' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

- Add MMIO MDIO mux driver
- Add Amlogic G12A MDIO mux driver
- Add DM_MDIO support for designware ethernet driver
- Add Amlogic Meson8b and later designware ethernet glue driver
- Switch all amlogic boards to Amlogic designware ethernet glue driver
- Switch all amlogic boards to DM_MDIO when necessary
- Remove all static ethernet setup code
2021-04-06 08:37:28 -04:00
Tom Rini
7168bcdefc Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Enhance WDT handling (starting / stopping) and introduce
  CONFIG_WATCHDOG_AUTOSTART to allow disabling of autostart of
  the WDT (Pali)
2021-04-06 08:37:06 -04:00
Tom Rini
779786dac3 ENOSYS clean-up
Minor dtoc improvements
 Convert CONFIG_MISC_INIT_F to Kconfig
 Allow unit tests to run on any board
 pylibfdt build-rule fix
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmBr+AgRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebnqQf/dZUk4cpj4q29icFJhAhG3wUkzKdKywWu
 wOwHPIaUIetytpjwKTbkv0cUdel5Jhp9mvnJ2O5cRUZlVdgCH+lEQmFiq1O74Jf5
 IwYBN74xZuP7+rno3ZxuKhjj2ixbpeg2A5R/o7gaevIgtu4vCK71qrj3y+unjnnt
 Rd5BGaVzouMya0lS9cdkrzE1vmuLXs7ZJBvKdppaNda0VScJj+JP3NqooFKRKPU+
 OeyblmtfL5lGOXFdY7Wfjg0pzv5L8fJxDaYDxf6iRWWG/X6RO6zV26MWAo28Ga+J
 E3fuvl0mBqr1eAg3Cf17j4s9gRZv1tMtS6Mol1scIcBrldalVFA44g==
 =x75X
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6apr21' of https://source.denx.de/u-boot/custodians/u-boot-dm

ENOSYS clean-up
Minor dtoc improvements
Convert CONFIG_MISC_INIT_F to Kconfig
Allow unit tests to run on any board
pylibfdt build-rule fix
2021-04-06 08:36:11 -04:00
Michael Walle
1fc9346af4 board: sl28: enable HS400 mode again
Now that it is working reliable on the LS1028A SoC, reenable support for
it.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06 18:36:11 +08:00
Neil Armstrong
888422ea17 configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCs
Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
1f636d8cb1 configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUX
Use DM_MDIO and the new G12A MDIO MUX driver for G12A, G12B & SM1 boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Neil Armstrong
6950ba4680 configs: update Amlogic Meson GXL & GXM config for MDIO MUX
Use DM_MDIO and the new MMIOREG MDIO MUX driver for GXL & GXM board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06 11:10:29 +02:00
Pali Rohár
88965fef6e arm: mvebu: Espressobin: Enable watchdog support but do not start it
Espressobin had disabled watchdog support (CONFIG_WDT) because older stable
Linux kernel versions (which are used by current stable OpenWRT and Debian
versions) do not have support for Armada 3700 watchdog driver. Therefore
they are not able to periodically kick watchdog so Espressobin enter into
boot loop.

This change enable CONFIG_WDT, CONFIG_WDT_ARMADA_37XX and CONFIG_CMD_WDT
options which add support for U-Boot 'wdt' command. And unset new
CONFIG_WATCHDOG_AUTOSTART option which cause that watchdog is not
automatically started by U-Boot during init phase, like when CONFIG_WDT
option is not set at all.

So with this change, U-Boot on Espressobin would have working 'wdt' command
which can be used from boot scripts (e.g. for enabling watchdog prior new
Linux booting kernel). But default behavior of watchdog status stays
unchanged, U-Boot does not start watchdog on Espressobin during its init
phase.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06 10:47:32 +02:00
Simon Glass
48f45455bf Convert CONFIG_MISC_INIT_F to Kconfig
This converts the following to Kconfig:
   CONFIG_MISC_INIT_F

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-06 16:33:19 +12:00
Tom Rini
472fd5a35a Merge tag 'rockchip-for-v2021.07' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Fix rk3368 lion board support;
- Fix px30 odroid-go2 board support;
- Add rk3399 NanoPi R4s and NanoPi M4B board support;
2021-04-05 22:39:10 -04:00
Tom Rini
90eba245a6 Merge branch 'next' 2021-04-05 11:29:57 -04:00
Fabio Estevam
17bc2cf89b imx8mn_ddr4_evk: Allow booting the kernel by default
Currently it is not possible to boot Linux from the SD card
by default.

Make the necessary adjustments to allow it.

Reported-by: Peter Bergin <peter@berginkonsult.se>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Andrey Zhizhikin <andrey.z@gmail.com> # imx8mn_ddr4_evk
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2021-04-05 08:08:56 -04:00
Tom Rini
db8b46120a Xilinx changes for v2021.07
net:
 - Fix gem PCS support
 
 spi:
 - Small trivial fixes
 
 zynq:
 - Enable time/timer commands
 - Update bitmain platform
 - Several DT changes
 
 zynqmp:
 - Update clock driver
 - mini config alignments
 - Add/update psu_init for zcu208/zcu216/zc1275
 - Several DT changes
 - Enable efi debug command (also for Versal)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYGRy+AAKCRDKSWXLKUoM
 IUN9AKCQHHdbKIciyhucUj5ThwT3CDaUswCeLQkRB1SrM6E8k6KkErWEA+xOxsU=
 =fIEs
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.07

net:
- Fix gem PCS support

spi:
- Small trivial fixes

zynq:
- Enable time/timer commands
- Update bitmain platform
- Several DT changes

zynqmp:
- Update clock driver
- mini config alignments
- Add/update psu_init for zcu208/zcu216/zc1275
- Several DT changes
- Enable efi debug command (also for Versal)
2021-03-31 09:47:30 -04:00
Michal Simek
c5465684b9 xilinx: Enable efi debug command
Enable EFI debug command to be able to setup various efi variables to avoid
software like grub.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:25 +02:00
Michal Simek
19eb739a20 ARM: bitmain: Enable saving variables to SD card
Board has NAND and SD interfaces which can be used for saving variables
too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:25 +02:00
Michal Simek
060fc5c8a0 ARM: bitmain: Enable legacy u-boot format
Still legacy formats are used that's why enable them by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:25 +02:00
Ashok Reddy Soma
8600dd8ad4 arm64: zynqmp: Increase size of malloc pool
size of malloc() pool for use before relocation is not sufficient
for ZynqMP mini u-boot with emmc configuration. Increase it to 4K.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Ashok Reddy Soma
2df44bbbb5 xilinx: zynq: Enable time and timer commands
Enable time command to get the elapsed time and timer commands.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30 12:03:24 +02:00
Alexandre Vicenzi
a99d70c180 board: dts: rockchip: Add NanoPi M4B
Add initial support for NanoPi M4B, a minor revision of
the original NanoPi M4.

Commit details of rk3399-nanopi-m4b.dts sync from Linux 5.12-rc4:
"arm64: dts: rockchip: Add NanoPi M4B board"
(sha1: c7b03115003f7f337ab165542cee37148cf30a8a)

Signed-off-by: Alexandre Vicenzi <alexandre.vicenzi@suse.com>
Reviewed-by: Kever Yang <kever.yang@rock-cihps.com>
2021-03-30 16:53:00 +08:00
Xiaobo Tian
b69b9f3f54 arm64: rk3399: Add support NanoPi R4s
NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].

[1] e7a0959082

Signed-off-by: xiaobo <peterwillcn@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Roger Pau Monné
253b151d48 odroid-go2: fix default FDT file path
The path in the Linux kernel dts directory is
rockchip/rk3326-odroid-go2.dtb.

That also seems to match the FDT path set on other boards (ie:
rock64-rk3328 for example).

Signed-off-by: Roger Pau Monne <royger@FreeBSD.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Roger Pau Monné
4e456fb636 odroid-go2: do not disable EFI
Remove the unset of the EFI loader, it's possible for U-Boot to
provide a EFI environment on this board, and it's also required by
the FreeBSD loader which mandated EFI on Aarch64.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Peter Robinson
98c7962291 rockchip: rk3399: rock960: explicitly disable SPI flash
The Rock960 doesn't have SPI flash on-board, but the bits
get enabled by default which means when booting we get
some errors. Explicitly disable it to stop the errors.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Heiko Stuebner
439fdaa26a rockchip: lion: update board defconfig
Adds the needed target option and drivers needed for correct
bringup.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Heiko Stuebner
ba421b96a2 rockchip: rk3368: sync down rk3368-lion board devicetree from Linux
This brings the actual rk3368-lion devicetree files from Linux 5.10
instead of using something separate.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Heiko Stuebner
ca7bb9dde7 rockchip: rk3368: move STACK_R_ADDR address and into Kconfig
With the STACK_R_ADDR at 0x600000 (6MB) we're competing with
with the loading address of either u-boot or atf parts, so move
that away to 0x4000000 (64MB) similar to rk3399.

Only lion currently sets that at all but not sheep the second
rk3368 board, so just move that to the Kconfig for rk3368 similar
to rk3399 as well.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:53:00 +08:00
Roger Pau Monné
19c6b8cf8b odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
Using a non-default SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR setting makes the
resulting u-boot-rockchip.bin unbootable, as it gets stuck after SPL.
Removing the setting from the defconfig allows U-Boot to load
successfully.

Signed-off-by: Roger Pau Monné <royger@FreeBSD.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-03-30 16:52:59 +08:00
Tom Rini
1057b1be75 Prepare v2021.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBiRbMACgkQFHw5/5Y0
 tyz0KAv/T8glQGL6L2CYeLuwbs9tndQoaH2YNb3teNUJrqehBleJAQ6ubHP30d87
 rHrokJ4Zu3TC15sACrK4GOMvsAVkeCuU/jIqFJA4ieDZr8g7yfUMOZMsDiIFdd36
 Rdmi71Jtek/csyS5BfcUUYoXVbUCGQ8yAx7z0VrK0sqsqZYYJNwPmqgkR8U2ulNb
 FiLxwamFwH7+bsvcvHajO1dOyko0zR7GTisf/fOgmlHuF3BldqG4SDcNd528uEWb
 r3fXs2Ut6IaC/beCnmKUPVG3ZjdPtb+T230rRRhUOfjTwqR7SzXp5bTyzdgyw3gU
 rOgfi/mAGQPPG2E2fzPz0JCI1irbnkSE2fVJ4epaVUCoHIEsQQdy034aD3qLcHFY
 65ihEpRvCM7s9jfKX8XeIG4rKFB4i60TX5orzdMvx7wV3rxmPE9qQmF9lkD+fEA+
 TPuFtkjGmluSe+xWBVK7+6xuF6rcLEbNXuFWRi3qMSMgH8rtGfeJRonusOGPolwC
 jQ1T7szW
 =UJ/O
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc5' into next

Prepare v2021.04-rc5
2021-03-29 18:00:21 -04:00
Simon Glass
529d5f96cf cpu: Rename SPL_CPU_SUPPORT to SPL_CPU
The _SUPPORT suffix is from an earlier time and interferes with use of
the CONFIG_IS_ENABLED() macro. Rename the option to drop the suffix.

Tidy up the TODO that prompted this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Simon Glass
26c69078c9 x86: coral: Drop ACPI properties from of-platdata
We don't use these in TPL or SPL, so drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Simon Glass
424994c48f sandbox: Create a new sandbox_noinst build
Move sandbox_spl over to use OF_PLATDATA_INST. Create a new board to
test the case when this is not enabled, since we will be keeping that
code around for several months and want to avoid regressions.

Skip the dm_test_of_plat_dev() test since driver info is not available
for OF_PLATDATA_INST.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Simon Glass
3a825d3fa7 Revert "sandbox: Disable I2C emulators in SPL"
With recent changes this can be supported again. Add it back.

This reverts commit d85f2c4f29.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:08 +13:00
Simon Glass
abaed70990 sandbox_spl: Increase SPL malloc() size
The test framework reinits driver model tests before running each test.
Since malloc_simple does not support free(), this eventually runs out of
memory.

Fix it for now by increasing the space to 32KB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-26 17:03:08 +13:00
Kuldeep Singh
a7c532f94c configs: ls1028a: Correct CONFIG_ENV_SECT_SIZE
LS1028A-RDB/QDS has Micron "mt35xu02g" nor flash of size 256M with 128K
sector size. Correct CONFIG_ENV_SECT_SIZE value to 128K.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
6712856469 configs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfig
LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines
present in header. Move these entries from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
72655b254b configs: ls1028a: Unset CONFIG_SPI_FLASH_SPANSION
There is no Spansion flash on LS1028A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Kuldeep Singh
3fadc80cd4 configs: lx2160a: Unset CONFIG_SPI_FLASH_SPANSION
There is no Spansion flash on LX2160A-RDB/QDS boards.
Unset CONFIG_SPI_FLASH_SPANSION option for both the boards.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Chris Packham
805c525b08 powerpc: t2080rdb: Enable RTC support
The T2080RDB has a ds1339 on i2c0. Add this to the devicetree and enable
the relevant support in the configs.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-23 18:06:07 +05:30
Weijie Gao
8ec9aa6a30 configs: mt7622: enable debug uart for mt7622_rfb_defconfig
Enable debug uart for mt7622_rfb_defconfig

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00
Weijie Gao
f4f478be4c board: mt7629: enable compression of u-boot to reduce the size of final image
This patch makes use of the decompression mechanism implemented for mt7628
previously to reduce the total image size. Binman will be also removed.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00
Weijie Gao
e21599ed00 configs: mt7622: use ARMv8 Generic Timer instead of mtk_timer
It's better to use the generic timer which is correctly initialized by
the ATF. The generic timer has higher resolution than the mtk_timer.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-20 16:24:27 -04:00
Fabien Parent
e96bedf146 board: Add MT8183 pumpkin board support
Add the MT8183 pumpkin board support.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2021-03-20 16:24:27 -04:00
Fabien Parent
86e07d59ee board: mediatek: rename pumpkin board into mt8516
More than one pumpkin board has been made with different MediaTek SoCs.
Rename the pumpkin board to follow the naming convention of all
other MediaTek boards and also to not be confusing when other pumpkin
boards will be added in follow-up commits.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2021-03-20 16:24:26 -04:00
Michael Walle
73e553a280 board: sl28: disable HS400 mode
Since commit 8ee802f899 ("mmc: fsl_esdhc: make sure delay chain locked
for HS400") HS400 mode is unreliable on LS1028A SoCs. Some workarounds are
missing for this SoC.

Disable HS400 mode for now.

Signed-off-by: Michael Walle <michael@walle.cc>
2021-03-19 10:35:19 -04:00
Lad Prabhakar
9e346340d7 board: silinux: Enable recovery SPL for EK874 board
Enable building SPL for EK874 board which is based on R8A774C0 SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-03-16 20:09:30 +01:00
Lad Prabhakar
07148c1899 arm: rmobile: Add Silicon Linux EK874 board support
The EK874 development kit from Silicon Linux is made of CAT874 (the main
board) and CAT875 (the sub board that goes on top of CAT874).

This patch adds the required board support to boot Si-Linux EK874 board
based on R8A774C0 SoC.

DTS files apart from r8a774c0-ek874-u-boot.dts and r8a774c0-u-boot.dtsi
have been imported from Linux kernel 5.11 commit f40ddce88593
("Linux 5.11").

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Biju Das
5be85de6a8 arm: rmobile: Add HopeRun HiHope RZ/G2H board support
The HiHope RZ/G2H board from HopeRun consists of main board
(HopeRun HiHope RZ/G2H main board) and sub board(HopeRun
HiHope RZ/G2H sub board). The HiHope RZ/G2H sub board sits
below the HiHope RZ/G2H main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2H board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Biju Das
dca070c382 arm: rmobile: Add HopeRun HiHope RZ/G2N board support
The HiHope RZ/G2N board from HopeRun consists of main board
(HopeRun HiHope RZ/G2N main board) and sub board(HopeRun
HiHope RZ/G2N sub board). The HiHope RZ/G2N sub board sits
below the HiHope RZ/G2N main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2N board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Biju Das
b650c83825 arm: rmobile: Add HopeRun HiHope RZ/G2M board support
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.

This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
2021-03-16 20:09:29 +01:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Tom Rini
6ad0769c8e configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-15 10:50:47 -04:00
Tom Rini
23986be8ca Merge tag 'ti-v2021.04-rc4' of https://source.denx.de/u-boot/custodians/u-boot-ti
- Fix boot for da850-evm and omap3_logic
- Optimize SPL size for am65x boards
2021-03-15 08:43:29 -04:00
Tom Rini
e8a10a02bd - Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
 - Remove the nand MTD configuration for NOR boot in stm32mp1 board
 - STM32programmer update
 - Bsec: manage clock when present in device tree
 - stm32mp15: move bootdelay configuration in defconfig
 - Update for stm32 dsi and dw_mipi_dsi
 - STM32 MCU's cleanup
 - Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
 - Update stm32mp1 doc
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmBLfA8cHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pkNnD/4hQrwBdaJMz9YXL4Tp
 0W7kpCcTkG+gINY06BONNnKzBHq62SkWMo/lw9iF0nlcNKSOHzrz6ttm+e54ngs0
 qe/dn0yjgImDfr5p5JRMTG1m7/XwQpucZ8wowSZAwt5f/DDh9eta9AyST0ev+iXI
 Eqgbk5HsF2OCOK6h74FJidZUdLMLw+uQkIwPhglx3ZaxxFfXHAdWtXtJ9Fky2adU
 BC0PltvJ6KYl1LTUGCQvrCST1sNe1PXPHrcsUpsQnqUSZ65tGKgeH2On9Exsw6cE
 eA5v0aiQSMmAH2pYXrJwxhSW9b03yt3NdBQd09Du2YUuFe7yZeoWIFy8mM9jRaov
 QDe88aJ9ZjxB+TvYQPToEL0EIyBGkN3HnX05BtKzKLf+E2+wP6gEf/6Sob7fBf6n
 3n2Eud0COfe06hNiocYOHm8n/8bZxdmuEgMA8LU0PZETbH33NlvJtrjyBxY4OHOV
 G+RG6J8idpVWWQ69g2TqfsVhXSjF893nvLOu0+KjuNrZWG4BVxGjylVUSvayk7bG
 TI++ZKlbdvJGweZ3uUPcNLH4VaX47P/nZS/6vX1uL7NtRNvv3jLHN5z4t6zKI9rh
 3iTJxxVv3zilWcY1WsoSdUvK56RTubnNwUlpjriabdRwMDjMN0isL9N06PvOELoi
 jU1IkKBLtMvPbb2XfLRIjvQjTQ==
 =nIJc
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc
2021-03-15 08:43:19 -04:00
Lokesh Vutla
f72edfddde configs: am65x_evm_r5: Enable checks for spl and stack sizes
Enable relevant configs that checks for the size of image and stack:

 BSS: 3KB
 Initial MALLOC: ~22KB
 Initial Stack: 8K
 SPL Image size can be: ~215KB

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-03-15 12:13:44 +05:30
Adam Ford
136284a3cf configs: omap3_logic: Enable CONFIG_SPL_ALLOC_BD
With bd_info dropped from the data section, the Logic PD OMAP3 boards
and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores
them.

Fixes: 38d6b7ebda ("spl: Drop bd_info in the data section")
Signed-off-by: Adam Ford <aford173@gmail.com>
2021-03-15 11:10:46 +05:30
Simon Glass
2e059e4a6e spl: test: Add a test for spl_load_simple_fit()
As an example of an SPL test, add a new test for loading a FIT within
SPL. This runs on sandbox_spl. For this to work, the text base is adjusted
so that there is plenty of space available.

While we are here, document struct spl_load_info properly, since this is
currently ambiguous.

This test only verifies the logic path. It does not actually check that
the image is loaded correctly. It is not possible for sandbox's SPL to
actually run u-boot.img since it currently includes u-boot.bin rather than
u-boot. Further work could expand the test in that direction.

The need for this was noted at:

   http://patchwork.ozlabs.org/project/uboot/patch/20201216000944.2832585-3-mr.nuke.me@gmail.com/

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-12 09:57:31 -05:00