Restriction lint for function pointer casts
The existing lints for function pointer casts cover the cases where a cast is non-portable or would result in truncation, however there's currently no way to forbid numeric function pointer casts entirely.
I've added a new lint `fn_to_numeric_cast_any`, which allows one to ban _all_ numeric function pointer casts, including to `usize`. This is useful if you're writing high-level Rust and want to opt-out of potentially surprising behaviour, avoiding silent bugs from forgotten parentheses, e.g.
```rust
fn foo() -> u32 {
10
}
fn main() {
let _ = foo as usize; // oops, forgot to call foo and got a random address instead!
}
```
~~I'm open to suggestions for the naming of the lint, because `fn_to_numeric_cast_any` is a bit clunky. Ideally I'd call this lint `fn_to_numeric_cast`, but that name is already taken for the more specific lint~~. We've stuck with `fn_to_numeric_cast_any` to avoid renaming the existing lint, or choosing a different name that's too generic (like `fn_cast`).
I'm also open to changing the suggestion behaviour, as adding parentheses is only one of many possible ways to fix the lint.
changelog: add ``[`fn_to_numeric_cast_any`]`` restriction lint
Make `shadow_reuse` suggestion less verbose
Closes#7764
Make `shadow_reuse` suggestion less verbose.
changelog: [`shadow_reuse`] does not warn shadowing statement
make test module detection more strict
I started with some small improvements to clippy_utils/src/lib.rs, but then found that our "test" module detection would also catch words containing "test" like e.g. "attestation". So I made this a bit more strict (splitting by `'_'` and checking for `test` or `tests`), adding a test case as I went.
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: none
Add expansion to while desugar spans
In the same vein as #88163, this reverts a change in Clippy behavior as a result of #80357 (and reverts some `#[allow]`s): This changes `clippy::blocks_in_if_conditions` to not fire on `while` loops. Though we might actually want Clippy to lint those cases, we should introduce the change purposefully, with tests, and possibly under a different lint name.
The actual change here is to add a desugaring expansion to the spans when lowering a `while` loop.
r? `@Manishearth`
Fix ICE when `start` lang item has wrong generics
In my previous pr #87875 I missed the requirements on the `start` lang item due to its relative difficulty to test and opting for more conservative estimates. This fixes that by updating the requirement to be exactly one generic type.
The `start` lang item should have exactly one generic type for the return type of the `main` fn ptr passed to it. I believe having zero would previously *sometimes* compile (often with the use of `fn() -> ()` as the fn ptr but it was likely UB to call if the return type of `main` was not `()` as far as I know) however it also sometimes would not for various errors including ICEs and LLVM errors depending on exact situations. Having more than 1 generic has always failed with an ICE because only the one generic type is expected and provided.
Fixes#79559, fixes#73584, fixes#83117 (all duplicates)
Relevant to #9307
r? ````@cjgillot````
fix bug for large_enum_variants
Fix the discussion problem in the issue of https://github.com/rust-lang/rust-clippy/issues/7666#issuecomment-919654291
About the false positive problem of case:
```rust
enum LargeEnum6 {
A,
B([u8;255]),
C([u8;200]),
}
```
changelog: Fix largest_enum_variant wrongly identifying the second largest variant.
Rustup
This needs a review this time. Especially 521bf8f0fa cc `@camsteffen` I think this is necessary now, because `itertools` is no longer a dependency of `clippy_utils` and therefore this path can't be found 🤔
( I forgot about the sync last week. I should get to document this process better, so other people can do it when I'm not around )
changelog: none
Don't lint `suspicious_else_formatting` inside proc-macros
fixes: #7650
I'll add a test for this one soon.
changelog: Don't lint `suspicious_else_formatting` inside proc-macros
Expand box_vec lint to box_collection
fixed#7451
changelog: Expand `box_vec` into [`box_collection`], and have it error on all sorts of boxed collections
Change `while_let_on_iterator` suggestion to use `by_ref()`
It came up in the discussion #7659 that suggesting `iter.by_ref()` is a clearer suggestion than `&mut iter`. I personally think they're equivalent, but if `by_ref()` is clearer to people then that should be the suggestion.
changelog: Change `while_let_on_iterator` suggestion when using `&mut` to use `by_ref()`
New lint: `same_name_method`
changelog: ``[`same_name_method`]``
fix: https://github.com/rust-lang/rust-clippy/issues/7632
It only compares a method in `impl` with another in `impl trait for`
It doesn't lint two methods in two traits.
I'm not sure my approach is the best way. I meet difficulty in other approaches.
Improve accuracy of `mut_key`
Fixes#6745.
Whilst writing the tests for this, I noticed what I believe is a false negative (the code in `@xFrednet's` [comment](https://github.com/rust-lang/rust-clippy/issues/6745#issuecomment-909658267) doesn't trigger the lint). Currently the tests contain a case for this (which is blatantly ignored), but I'm not at all sure how to implement this (since the lint currently behaves completely differently for ADTs). I'm not sure what should be done - on the one hand the extra test cases are misleading, but on the other hand they don't cause much harm and would save effort for anyone fixing that false negative.
---
changelog: Improve accuracy of `clippy::mutable_key_type`.
Target directory cleanup
changelog: none
* .cargo/config now has `target-dir` specified so that it is inherited by child projects. The target directory needs to be shared with clippy_dev, but not necessarily at the project root. (cc #7625)
* Uses `std::env::current_exe` (and its parent directories) whenever possible
* `CLIPPY_DRIVER_PATH` and `TARGET_LIBS` are no longer required from rustc bootstrap (but `HOST_LIBS` still is). These can be removed from the rustc side after merging.
* `CLIPPY_DOGFOOD` and the separate target directory are removed. This was originally added to mitigate #7343.
r? `@flip1995`
Fix various redundant_closure bugs
changelog: Fix various false negatives and false positives for [`redundant_closure`]
Closes#3071Closes#4002
This lint is full of weird nuances and this is basically a re-write to tighten up the logic.
Fix result order for `manual_split_once` when `rsplitn` is used
fixes: #7656
changelog: Fix result order for `manual_split_once` when `rsplitn` is used
Add new lint `iter_not_returning_iterator`
Add new lint [`iter_not_returning_iterator`] to detect method `iter()` or `iter_mut()` returning a type not implementing `Iterator`
changelog: Add new lint [`iter_not_returning_iterator`]
Fix `option_if_let_else`
fixes: #5822fixes: #6737fixes: #7567
The inference from #6137 still exists so I'm not sure if this should be moved from the nursery. Before doing that though I'd almost want to see this split into two lints. One suggesting `map_or` and the other suggesting `map_or_else`.
`map_or_else` tends to have longer expressions for both branches so it doesn't end up much shorter than a match expression in practice. It also seems most people find it harder to read. `map_or` at least has the terseness benefit of being on one line most of the time, especially when the `None` branch is just a literal or path expression.
changelog: `break` and `continue` statments local to the would-be closure are allowed in `option_if_let_else`
changelog: don't lint in const contexts in `option_if_let_else`
changelog: don't lint when yield expressions are used in `option_if_let_else`
changelog: don't lint when the captures made by the would-be closure conflict with the other branch in `option_if_let_else`
changelog: don't lint when a field of a local is used when the type could be pontentially moved from in `option_if_let_else`
changelog: in some cases, don't lint when scrutinee expression conflicts with the captures of the would-be closure in `option_if_let_else`
Add module_style lint to style
changelog: Add new [`module_style`] style lint
This is a configurable (no mod file/mod file) lint that determines if `mod.rs` is used consistently or if `mod.rs` is never used (using the new mod layout).
Don't report function calls as unnecessary operation if used in array index
Attempts to fix: #7412
changelog: Don't report function calls used in indexing as unnecessary operation. [`unnecessary_operation`]
Add tests for disallowed_mod in ui-cargo test section
Use correct algorithm to determine if mod.rs is missing
Move to two lints and remove config option
Switch lint names so they read "warn on ..."
Emit the same help info for self_named_mod_file warnings
Bail when both lints are Allow
Reword help message for both module_style lints
Add new lint `negative_feature_names` and `redundant_feature_names`
Add new lint [`negative_feature_names`] to detect feature names with prefixes `no-` or `not-` and new lint [`redundant_feature_names`] to detect feature names with prefixes `use-`, `with-` or suffix `-support`
changelog: Add new lint [`negative_feature_names`] and [`redundant_feature_names`]
* `break` and `continue` statments local to the would-be closure are allowed
* don't lint in const contexts
* don't lint when yield expressions are used
* don't lint when the captures made by the would-be closure conflict with the other branch
* don't lint when a field of a local is used when the type could be pontentially moved from
* in some cases, don't lint when scrutinee expression conflicts with the captures of the would-be closure
Uplift the invalid_atomic_ordering lint from clippy to rustc
This is mostly just a rebase of https://github.com/rust-lang/rust/pull/79654; I've copy/pasted the text from that PR below.
r? `@lcnr` since you reviewed the last one, but feel free to reassign.
---
This is an implementation of https://github.com/rust-lang/compiler-team/issues/390.
As mentioned, in general this turns an unconditional runtime panic into a (compile time) lint failure. It has no false positives, and the only false negatives I'm aware of are if `Ordering` isn't specified directly and is comes from an argument/constant/whatever.
As a result of it having no false positives, and the alternative always being strictly wrong, it's on as deny by default. This seems right.
In the [zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Uplift.20the.20.60invalid_atomic_ordering.60.20lint.20from.20clippy/near/218483957) `@joshtriplett` suggested that lang team should FCP this before landing it. Perhaps libs team cares too?
---
Some notes on the code for reviewers / others below
## Changes from clippy
The code is changed from [the implementation in clippy](68cf94f6a6/clippy_lints/src/atomic_ordering.rs) in the following ways:
1. Uses `Symbols` and `rustc_diagnostic_item`s instead of string literals.
- It's possible I should have just invoked Symbol::intern for some of these instead? Seems better to use symbol, but it did require adding several.
2. The functions are moved to static methods inside the lint struct, as a way to namespace them.
- There's a lot of other code in that file — which I picked as the location for this lint because `@jyn514` told me that seemed reasonable.
3. Supports unstable AtomicU128/AtomicI128.
- I did this because it was almost easier to support them than not — not supporting them would have (ideally) required finding a way not to give them a `rustc_diagnostic_item`, which would have complicated an already big macro.
- These don't have tests since I wasn't sure if/how I should make tests conditional on whether or not the target has the atomic... This is to a certain extent an issue of 64bit atomics too, but 128-bit atomics are much less common. Regardless, the existing tests should be *more* than thorough enough here.
4. Minor changes like:
- grammar tweaks ("loads cannot have `Release` **and** `AcqRel` ordering" => "loads cannot have `Release` **or** `AcqRel` ordering")
- function renames (`match_ordering_def_path` => `matches_ordering_def_path`),
- avoiding clippy-specific helper methods that don't exist in rustc_lint and didn't seem worth adding for this case (for example `cx.struct_span_lint` vs clippy's `span_lint_and_help` helper).
## Potential issues
(This is just about the code in this PR, not conceptual issues with the lint or anything)
1. I'm not sure if I should have used a diagnostic item for `Ordering` and its variants (I couldn't figure out how really, so if I should do this some pointers would be appreciated).
- It seems possible that failing to do this might possibly mean there are more cases this lint would miss, but I don't really know how `match_def_path` works and if it has any pitfalls like that, so maybe not.
2. I *think* I deprecated the lint in clippy (CC `@flip1995` who asked to be notified about clippy changes in the future in [this comment](https://github.com/rust-lang/rust/pull/75671#issuecomment-718731659)) but I'm not sure if I need to do anything else there.
- I'm kind of hoping CI will catch if I missed anything, since `x.py test src/tools/clippy` fails with a lot of errors with and without my changes (and is probably a nonsense command regardless). Running `cargo test` from src/tools/clippy also fails with unrelated errors that seem like refactorings that didnt update clippy? So, honestly no clue.
3. I wasn't sure if the description/example I gave good. Hopefully it is. The example is less thorough than the one from clippy here: https://rust-lang.github.io/rust-clippy/master/index.html#invalid_atomic_ordering. Let me know if/how I should change it if it needs changing.
4. It pulls in the `if_chain` crate. This crate was already used in clippy, and seems like it's used elsewhere in rustc, but I'm willing to rewrite it to not use this if needed (I'd prefer not to, all things being equal).
- Deprecate clippy::invalid_atomic_ordering
- Use rustc_diagnostic_item for the orderings in the invalid_atomic_ordering lint
- Reduce code duplication
- Give up on making enum variants diagnostic items and just look for
`Ordering` instead
I ran into tons of trouble with this because apparently the change to
store HIR attrs in a side table also gave the DefIds of the
constructor instead of the variant itself. So I had to change
`matches_ordering` to also check the grandparent of the defid as well.
- Rename `atomic_ordering_x` symbols to just the name of the variant
- Fix typos in checks - there were a few places that said "may not be
Release" in the diagnostic but actually checked for SeqCst in the lint.
- Make constant items const
- Use fewer diagnostic items
- Only look at arguments after making sure the method matches
This prevents an ICE when there aren't enough arguments.
- Ignore trait methods
- Only check Ctors instead of going through `qpath_res`
The functions take values, so this couldn't ever be anything else.
- Add if_chain to allowed dependencies
- Fix grammar
- Remove unnecessary allow
* Captures by sub closures are now considered
* Copy types are correctly borrowed by reference when their value is used
* Fields are no longer automatically borrowed by value
* Bindings in `match` and `let` patterns are now checked to determine how a local is captured
Link to edition guide instead of issues for 2021 lints.
This changes the 2021 lints to not link to github issues, but to the edition guide instead.
Fixes #86996
Add `unwrap_or_else_default` lint
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Add a new [`unwrap_or_else_default`] style lint. This will catch `unwrap_or_else(Default::default)` on Result and Option and suggest `unwrap_or_default()` instead.
`never_loop`: suggest using an `if let` instead of a `for` loop
changelog: suggest using an `if let` statement instead of a `for` loop that [`never_loop`]s
Fixes#7537, r? `@camsteffen.`
Don't emit `too_many_lines` for closures
changelog: don't emit the [`too_many_lines`] lint inside closures to avoir duplicated diagnostics.
Fixes#7517.
Make `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` warn by default
This PR makes the `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint warn by default.
To avoid showing a large number of un-actionable warnings to users, we only enable the lint for macros defined in the same crate. This ensures that users will be able to fix the warning by simply removing a semicolon.
In the future, I'd like to enable this lint unconditionally, and eventually make it into a hard error in a future edition. This PR is a step towards that goal.
This updates all the deploy scripts and the deploy workflow.
The deploy workflow now runs the metadata collector to collect the lint
documentation. It also changes the files that are checked out in the
deploy workflow from master and adds an explanation why we have to do
this.
Explain flags missing in cargo check in --help
This commit closes#7389. As stated in the issue, `cargo clippy --help`
provides explanation for some flags and states that the rest are same
as in `cargo check --help`, even though some clippy specific flags
exist.
This commit extends the `cargo clippy --help` with two additional flags,
- `cargo clippy --fix`
- `cargo clippy --no-deps`
If there are more flags which are not present in `cargo check --help`
please bring these to my attention, I will include these aswell.
For now, I noticed only the two flags mentioned above.
changelog: `cargo clippy --help` now explains additional flags missing in `cargo check --help`.
Fix docs of disallowed_type
Add ability to name primitive types without import path
Move primitive resolution to clippy_utils path_to_res fn
Refactor Res matching, fix naming and docs from review
Use tcx.def_path_str when emitting the lint
As proposed in the pull request thread, there is some inconsistency in
handling the `--no-deps` flag which requires `--` before it, and
`--fix` flag which does not.
In this commit the `--no-deps` flag does not need the `--` anymore.
However, it can still be used that way: `cargo clipyy -- --no-deps`.
Use diagnostic items where possible
Clippy still uses a bunch of paths in places that could easily use already defined diagnostic items. This PR updates all references to such paths and also removes a bunch of them that are no longer needed after this cleanup.
Some paths are also used to construct new paths and can therefore not be removed that easily. I've added a doc comment to those instances that recommends the use of the diagnostic item where possible.
And that's it, cleaning crew signing off 🧹🗑️
---
changelog: none
(only internal improvements)
cc: #5393
Prefer a code snipped over formatting the self type (`new_without_default`)
Fixes: rust-lang/rust-clippy#7220
changelog: [`new_without_default`]: The `Default` impl block type doesn't use the full type path qualification
Have a nice day to everyone reading this 🙃
similar_names: No longer suggest inserting or appending an underscore
changelog: [`similar_names`] lint no longer suggests to insert or add an underscore to "fix" too similar names
New lint: [`self_named_constructor`]
Adds the `self_named_constructor` lint for detecting when an implemented method has the same name as the type it is implemented for.
changelog: [`self_named_constructor`]
closes: #7142
FP fix and documentation for `branches_sharing_code` lint
Closesrust-lang/rust-clippy#7369
Related rust-lang/rust-clippy#7452 I'm still thinking about the best way to fix this. I could simply add another visitor to ensure that the moved expressions don't modify values being used in the condition, but I'm not totally happy with this due to the complexity. I therefore only documented it for now
changelog: [`branches_sharing_code`] fixed false positive where block expressions would sometimes be ignored.
Don't suggest doc(hidden) or unstable variants in wildcard lint
Clippy's wildcard lint would suggest doc(hidden) and unstable variants for non_exhaustive enums, even though those aren't part of the public interface (yet) and should only be matched on using a `_`, just like potential future additions to the enum. There was already some logic to exclude a *single* doc(hidden) variant. This extends that to all hidden variants, and also hides `#[unstable]` variants.
See https://github.com/rust-lang/rust/pull/85746#issuecomment-868886893
This PR includes https://github.com/rust-lang/rust-clippy/pull/7406 as the first commit.
Here's the diff that this PR adds on top of that PR: https://github.com/m-ou-se/rust-clippy/compare/std-errorkind...m-ou-se:doc-hidden-variants
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: No longer suggest unstable and doc(hidden) variants in wildcard lint. wildcard_enum_match_arm, match_wildcard_for_single_variants
This fixes a bug where match_wildcard_for_single_variants produced a
bad suggestion where besides the missing variant, one or more hidden
variants were left.
This also adds tests to the ui-tests match_wildcard_for_single_variants
and wildcard_enum_match_arm to make sure that the correct suggestion is
produced.
New lint: `disallowed_script_idents`
This PR implements a new lint to restrict locales that can be used in the code,
as proposed in #7376.
Current concerns / unresolved questions:
- ~~Mixed usage of `script` (as a Unicode term) and `locale` (as something that is easier to understand for the broad audience). I'm not sure whether these terms are fully interchangeable and whether in the current form it is more confusing than helpful.~~ `script` is now used everywhere.
- ~~Having to mostly copy-paste `AllowedScript`. Probably it's not a big problem, as the list of scripts is standardized and is unlikely to change, and even if we'd stick to the `unicode_script::Script`, we'll still have to implement custom deserialization, and I don't think that it will be shorter in terms of the amount of LoC.~~ `unicode::Script` is used together with a filtering deserialize function.
- Should we stick to the list of "recommended scripts" from [UAX #31](http://www.unicode.org/reports/tr31/#Table_Recommended_Scripts) in the configuration?
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: ``[`disallowed_script_idents`]``
r? `@Manishearth`
Improve lint message for match-same-arms lint
fixes#7331
Follow-up to #7377
This PR improves the lint message for `match-same-arms` lint and adds `todo!(..)` example to the lint docs.
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: None
Do not spawn blacklisted_name lint in test context
---
fixed#7305
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: `blacklisted_name` lint is not spawned in the test context anymore.
Fix detecting of the 'test' attribute
Update UI test to actually check that warning is not triggered in the test code
Fix approach for detecting the test module
Add nested test case
Remove code duplication by extracting 'is_test_module_or_function' into 'clippy_utils'
Cleanup the code
Add import_rename lint, this adds a field on the Conf struct
fixes#7276
changelog: Add ``[`import_rename`]`` a lint that enforces import renaming defined in the config file.
Fix wrong config option being suggested for deprecated wrong_pub_self_convention lint
Problem:
for code like
````rust
#![warn(clippy::wrong_pub_self_convention)]
fn main() {
println!("Hello, world!");
}
````
clippy will issue a warning to use a clippy.toml option instead:
````
warning: lint `clippy::wrong_pub_self_convention` has been removed: set the `avoid_breaking_exported_api` config option to `false` to enable the `wrong_self_convention` lint for public items
--> src/main.rs:2:9
|
2 | #![warn(clippy::wrong_pub_self_convention)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(renamed_and_removed_lints)]` on by default
````
But using the lint name as seen in the warning message
`echo "avoid_breaking_exported_api = true\n" > clippy.toml`
Will cause an error:
````
error: error reading Clippy's configuration file `/tmp/clippytest/clippy.toml`: unknown field `avoid_breaking_exported_api`, expected one of `avoid-breaking-exported-api`, ...
````
Replace the underscores with dashes in the deprecation message.
changelog: avoid_breaking_exported_api: suggest correct clippy config toml option in the deprecation message
Problem:
for code like
````
fn main() {
println!("Hello, world!");
}
````
clippy will issue a warning to use a clippy.toml option instead:
````
warning: lint `clippy::wrong_pub_self_convention` has been removed: set the `avoid_breaking_exported_api` config option to `false` to enable the `wrong_self_convention` lint for public items
--> src/main.rs:2:9
|
2 | #![warn(clippy::wrong_pub_self_convention)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[warn(renamed_and_removed_lints)]` on by default
````
But using the lint name as seen in the warning message
echo "avoid_breaking_exported_api = true\n" > clippy.toml
Will cause an error:
````
error: error reading Clippy's configuration file `/tmp/clippytest/clippy.toml`: unknown field `avoid_breaking_exported_api`, expected one of `avoid-breaking-exported-api`, ...
````
Replace the underscores with dashes in the deprecation message.
changelog: avoid_breaking_exported_api: suggest correct clippy config toml option in the deprecation message
Add macro_braces lint to check for irregular brace use in certain macros
The name is a bit long but this sounds good as `#[allow(unconventional_macro_braces)]` and it seems more clear that we are talking about the macro call not macro definitions, any feedback let me know. Thanks!
fixes#7278
changelog: Add ``[`unconventional_macro_braces`]`` lint that checks for uncommon brace usage with macros.
Rename unconventional -> nonstandard, add config field
Add standard_macro_braces fields so users can specify macro names and
brace combinations to lint for in the clippy.toml file.
Fix errors caused by nonstandard_macro_braces in other lint tests
Fix users ability to override the default nonstandard macro braces
Add type position macros impl `check_ty`
Remove requirement of fully qualified path for disallowed_method/type
changelog: Remove the need for fully qualified paths in disallowed_method and disallowed_type
After fixing this issue in [import_rename](https://github.com/rust-lang/rust-clippy/pull/7300#discussion_r650127720) I figured I'd fix it for these two.
If this does in fact fix the **Known problems:** section I was planning to remove them from both lints after confirmation.
Vec extend to append
This PR adds a check to suggest changes of vector from
```
vec.extend(other_vec.drain(..))
```
could be written as
```
vec![].append(&mut vec![]);
```
changelog: Add vec_extend_to_append lint
issue: #7209
Don't trigger `field_reassign_with_default` in macros
Fixes#7155
Producing a good suggestion for this lint is already hard when no macros
are involved. With macros the lint message and the suggestion are just
confusing. Since both, producing a good suggestion and figuring out if
this pattern can be re-written inside a macro is nearly impossible, just
bail out.
changelog: [`field_reassign_with_default`] No longer triggers in macros
---
No that our reviewing queue is under control, I want to start hacking on Clippy myself again. Starting with an easy issue to get back in :)
Add disallowed_type lint, this adds a field to the conf struct
Fixes#7277
changelog: Add ``[`disallowed_type`]`` a lint that can enforce banning types specified in the config.
Fix false positive on `semicolon_if_nothing_returned`
Currently the [`semicolon_if_nothing_returned`](https://rust-lang.github.io/rust-clippy/master/index.html#semicolon_if_nothing_returned) lint fires in unwanted situations where a block only spans one line. An example of this was given in #7324. This code:
```rust
use std::mem::MaybeUninit;
use std::ptr;
fn main() {
let mut s = MaybeUninit::<String>::uninit();
let _d = || unsafe { ptr::drop_in_place(s.as_mut_ptr()) };
}
```
yields the following clippy error:
```
error: consider adding a `;` to the last statement for consistent formatting
--> src/main.rs:6:26
|
6 | let _d = || unsafe { ptr::drop_in_place(s.as_mut_ptr()) };
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: add a `;` here: `ptr::drop_in_place(s.as_mut_ptr());`
|
= note: `-D clippy::semicolon-if-nothing-returned` implied by `-D clippy::pedantic`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#semicolon_if_nothing_returned
```
I updated the lint to check if the statement is inside an `unsafe` block, a closure or a normal block and if the block only spans one line, in that case the lint is not emitted.
This closes#7324.
changelog: enhanced semicolon if nothing returned according to #7324.
Refactoring identity function lints
I've noticed that we have several lints that all check for identity functions and each used their own check implementation. I moved the `is_expr_identity_function` function to `clippy_utils` and adapted all lints to reuse that one function. This should make the addition of new lints like this also easier in the future.
I've also moved the `map_identity` lint into the `methods` module. It's probably the best to review this PR by checking each commit individually. And that's it, have a great day 🙃
changelog: none
fix `while_let_on_iterator` suggestion in a closure
fixes: #7249
A future improvement would be to check if the closure is being used as `FnOnce`, in which case the original suggestion would be correct.
changelog: Suggest `&mut iter` inside a closure for `while_let_on_iterator`
Fix missing_docs_in_private_items false negative
changelog: Fix [`missing_docs_in_private_items`] false negative when the item has any `#[name = "value"]` attribute
Closes#7247 (decided not to use the rustc method since it calls `Session::check_name`, which is for rustc only)
Fix allow on some statement lints
changelog: Fix `#[allow(..)]` over statements for [`needless_collect`], [`short_circuit_statement`] and [`unnecessary_operation`]
Fixes#7171Fixes#7202
Adding the ability to invalidate caches to force metadata collection
This adds the discussed hack to touch `clippy_lints/src/lib.rs` to invalidate cargos cache and force metadata collection. I've decided to use the [`filetime`](https://github.com/alexcrichton/filetime) crate instead of the touch command to make is cross-platform and just cleaner in general. Looking at the maintainers I would say that it's a save crate to use xD.
---
cc: #7172 I know this ID without looking it up now... This is not good
changelog: none
r? `@flip1995`
Fix invalid syntax in `from_iter_instead_of_collect` suggestion
First attempt at contributing, hopefully this is a good start and can be improved. :)
fixes#7259
changelog: [`from_iter_instead_of_collect`] fix invalid suggestion involving "as Trait"
Don't lint `multiple_inherent_impl` with generic arguments
fixes: #5772
changelog: Treat different generic arguments as different types in `multiple_inherent_impl`
Remove powi, "square can be computed more efficiently"
powi(2) produces exactly the same native code as x * x
powi was part of the [`suboptimal_flops`] lint
fixes#7058
changelog: Remove powi [`suboptimal_flops`], "square can be computed more efficiently"
Add `needless_bitwise_bool` lint
fixes#6827fixes#1594
changelog: Add ``[`needless_bitwise_bool`]`` lint
Creates a new `bitwise_bool` lint to convert `x & y` to `x && y` when both `x` and `y` are booleans. I also had to adjust thh `needless_bool` lint slightly, and fix a couple failing dogfood tests. I made it a correctness lint as per flip1995's comment [here](https://github.com/rust-lang/rust-clippy/pull/3385#issuecomment-434715723), from a previous WIP attempt at this lint.
Fix FPs about generic args
Fix 2 false positives in [`use_self`] and [`useless_conversion`] lints, by taking into account generic args and comparing them.
Fixes: #7205Fixes: #7206
changelog: Fix FPs about generic args in [`use_self`] and [`useless_conversion`] lints
New lint: `unused_async`
changelog: Adds a lint, `unused_async`, which checks for async functions with no await statements
`unused_async` is a lint that reduces code smell and overhead by encouraging async functions to be refactored into synchronous functions.
Fixes#7176
### Examples
```rust
async fn get_random_number() -> i64 {
4 // Chosen by fair dice roll. Guaranteed to be random.
}
```
Could be written as:
```rust
fn get_random_number() -> i64 {
4 // Chosen by fair dice roll. Guaranteed to be random.
}
```
Something like this, however, should **not** be caught by clippy:
```rust
#[async_trait]
trait AsyncTrait {
async fn foo();
}
struct Bar;
#[async_trait]
impl AsyncTrait for Bar {
async fn foo() {
println!("bar");
}
}
```
Stop linting `else if let` pattern in [`option_if_let_else`] lint
For readability concerns, it is counterproductive to lint `else if let` pattern.
Unfortunately the suggested code is much less readable.
Fixes: #7006
changelog: stop linting `else if let` pattern in [`option_if_let_else`] lint
Add `cargo collect-metadata` as an cargo alias for the metadata collection lint
This PR adds a new alias to run the metadata collection monster on `clippy_lints`. I'm currently using it to create the `metadata_collection.json` file and I plan to use it in the `deply.sh` script. Having it as a new alias enables us to simply use:
```sh
cargo collect-metadata
```
It sometimes requires running `cargo clean` before collecting the metadata due to caching. I'm still debating if I should include a cargo clean as part of the `run_metadata_collection_lint` test or not. Input on this would be greatly appreciated 🙃
That's it, just a small change that can be reviewed and merged in parallel to #7214.
---
See: #7172 for the full metadata collection to-do list or to suggest a new feature in connection to it.
---
changelog: none
r? `@flip1995` btw. feel free to pass these PRs one to other team members as well if you want.
`needless_collect` enhancements
fixes#7164
changelog: `needless_collect`: For `BTreeMap` and `HashMap` lint only `is_empty`, as `len` might produce different results than iter's `count`
changelog: `needless_collect`: Lint `LinkedList` and `BinaryHeap` in direct usage case as well
Trigger [`wrong_self_convention`] only if it has implicit self
Lint [`wrong_self_convention`] only if the impl or trait has `self` _per sé_.
Fixes: #7179
changelog: trigger [`wrong_self_convention`] only if it has implicit self
match_single_binding: Fix invalid suggestion when match scrutinee has side effects
fixes#7094
changelog: `match_single_binding`: Fix invalid suggestion when match scrutinee has side effects
---
`Expr::can_have_side_effects` is used to determine the scrutinee has side effects, while this method is a little bit conservative for our use case. But I'd like to use it to avoid reimplementation of the method and too much heuristics. If you think this is problematic, then I'll implement a custom visitor to address it.
* Suggest `&mut iter` when the iterator is used after the loop.
* Suggest `&mut iter` when the iterator is a field in a struct.
* Don't lint when the iterator is a field in a struct, and the struct is
used in the loop.
* Lint when the loop is nested in another loop, but suggest `&mut iter`
unless the iterator is from a local declared inside the loop.
Fix needless_quesiton_mark false positive
changelog: Fix [`needless_question_mark`] false positive where the inner value is implicity dereferenced by the question mark.
Fixes#7107
Handle write!(buf, "\n") case better
Make `write!(buf, "\n")` suggest `writeln!(buf)` by removing
the trailing comma from `writeln!(buf, )`.
changelog: [`write_with_newline`] suggestion on only "\n" improved
Make `write!(buf, "\n")` suggest `writeln!(buf)` by removing
the trailing comma from `writeln!(buf, )`.
changelog: [`write_with_newline`] suggestion on only "\n" improved
It relaxes rules for `to_*` variant, so it doesn't lint in trait definitions
and implementations anymore.
Although, non-`Copy` type implementing trait's `to_*` method taking
`self` feels not good (consumes ownership, so should be rather named `into_`), it would be better if this case was a pedantic lint (allow-by-default) instead.
Refactor: arrange lints in misc_early module
This PR arranges misc_early lints so that they can be accessed more easily.
Basically, I refactored them following the instruction described in #6680.
cc: `@Y-Nak,` `@flip1995,` `@magurotuna`
changelog: Move lints in misc_early module into their own modules.
Fix stack overflow issue in `redundant_pattern_matching`
Fixes#7169
~~cc `@Jarcho` Since tomorrow is release day and we need to get this also fixed in beta, I'll just revert the PR instead of looking into the root issue. Your changes are good, so if you have an idea what could cause this stack overflow and know how to fix it, please open a PR that reverts this revert with a fix.~~
r? `@llogiq`
changelog: none (fixes stack overflow, but this was introduced in this release cycle)
needless_collect: Lint cases with type annotations for indirect usage and recognize `BinaryHeap`
fixes#7110
changelog: needless_collect: Lint cases with type annotations for indirect usage and recognize `BinaryHeap`.
Producing a good suggestion for this lint is already hard when no macros
are involved. With macros the lint message and the suggestion are just
confusing. Since both, producing a good suggestion and figuring out if
this pattern can be re-written inside a macro is nearly impossible, just
bail out.
Update BARE_TRAIT_OBJECT and ELLIPSIS_INCLUSIVE_RANGE_PATTERNS to errors in Rust 2021
This addresses https://github.com/rust-lang/rust/pull/81244 by updating two lints to errors in the Rust 2021 edition.
r? `@estebank`
[single_char_pattern] add strip_prefix and strip_suffix
Title says it all. Adjusted ui tests.
I added the second commit in case you don't like that I moved that table into `single_char_pattern.rs` directly. I don't see any reason why it shouldn't be in that file. It isn't used anywhere else.
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: add strip_prefix and strip_suffix to single_char_pattern lint
while_immutable_cond: check condition for mutation
This fixes#6689 by also checking the bindings mutated in the condition, whereas it was previously only checked in the loop body.
---
changelog: Fix FP in [`while_immutable_cond`] where mutation in the loop variable wasn't picked up.
`implicit_return` improvements
fixes: #6940
changelog: Fix `implicit_return` suggestion for async functions
changelog: Improve `implicit_return` suggestions when returning the result of a macro
changelog: Check for `break` expressions inside a loop which are then implicitly returned
changelog: Allow all diverging functions in `implicit_return`, not just panic functions
Implement `x.py test src/tools/clippy --bless`
- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
- Fix clippy_dev warnings
- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
- Fix clippy_dev warnings
Fix FN in `iter_cloned_collect` with a large array
fixes#6808
changelog: Fix FN in `iter_cloned_collect` with a large array
I spotted that [is_iterable_array](a362a4d1d0/clippy_lints/src/loops/explicit_iter_loop.rs (L67-L75)) function that `explicit_iter_loop` lint is using only works for array sizes <= 32.
There is this comment:
> IntoIterator is currently only implemented for array sizes <= 32 in rustc
I'm a bit confused, because I read that [IntoIterator for arrays](https://doc.rust-lang.org/src/core/array/mod.rs.html#194-201) with const generic `N` is stable since = "1.0.0". Although Const Generics MVP were stabilized in Rust 1.51.
Should I set MSRV for the current change? I will try to test with older compilers soon.
manual_unwrap_or: fix invalid code suggestion, due to macro expansion
fixes#6965
changelog: fix invalid code suggestion in `manual_unwrap_or` lint, due to macro expansion
`single_component_path_imports`: ignore `pub(crate) use some_macro;`
Fixes#7106
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Ignore exporting a macro within a crate using `pub(crate) use some_macro;` for [`single_component_path_imports`]
Unused io amount detects `.read().ok()?`
fixes#7096
changelog: unused_io_amount now detect expertion like `.read().ok()?`, `.read().or_else(|err| ...)?` and similar expressions.
Better suggestions when returning macro calls.
Suggest changeing all the break expressions in a loop, not just the final statement.
Don't lint divergent functions.
Don't suggest returning the result of any divergent fuction.
Add lint to check for boolean comparison in assert macro calls
This PR adds a lint to check if an assert macro is using a boolean as "comparison value". For example:
```rust
assert_eq!("a".is_empty(), false);
```
Could be rewritten as:
```rust
assert!(!"a".is_empty());
```
PS: The dev guidelines are amazing. Thanks a lot for writing them!
changelog: Add `bool_assert_comparison` lint
useless use of format! should return function directly
fixes#7066
changelog: [`useless_format`] wraps the content in the braces when it's needed.
r? `@giraffate`
Add `Unsupported` to `std::io::ErrorKind`
I noticed a significant portion of the uses of `ErrorKind::Other` in std is for unsupported operations.
The notion that a specific operation is not available on a target (and will thus never succeed) seems semantically distinct enough from just "an unspecified error occurred", which is why I am proposing to add the variant `Unsupported` to `std::io::ErrorKind`.
**Implementation**:
The following variant will be added to `std::io::ErrorKind`:
```rust
/// This operation is unsupported on this platform.
Unsupported
```
`std::io::ErrorKind::Unsupported` is an error returned when a given operation is not supported on a platform, and will thus never succeed; there is no way for the software to recover. It will be used instead of `Other` where appropriate, e.g. on wasm for file and network operations.
`decode_error_kind` will be updated to decode operating system errors to `Unsupported`:
- Unix and VxWorks: `libc::ENOSYS`
- Windows: `c::ERROR_CALL_NOT_IMPLEMENTED`
- WASI: `wasi::ERRNO_NOSYS`
**Stability**:
This changes the kind of error returned by some functions on some platforms, which I think is not covered by the stability guarantees of the std? User code could depend on this behavior, expecting `ErrorKind::Other`, however the docs already mention:
> Errors that are `Other` now may move to a different or a new `ErrorKind` variant in the future. It is not recommended to match an error against `Other` and to expect any additional characteristics, e.g., a specific `Error::raw_os_error` return value.
The most recent variant added to `ErrorKind` was `UnexpectedEof` in `1.6.0` (almost 5 years ago), but `ErrorKind` is marked as `#[non_exhaustive]` and the docs warn about exhaustively matching on it, so adding a new variant per se should not be a breaking change.
The variant `Unsupported` itself could be marked as `#[unstable]`, however, because this PR also immediately uses this new variant and changes the errors returned by functions I'm inclined to agree with the others in this thread that the variant should be insta-stabilized.
Allow allman style braces in `suspicious_else_formatting`
fixes: #3864
Indentation checks could be added as well, but the lint already doesn't check for it.
changelog: Allow allman style braces in `suspicious_else_formatting`
Fixing FPs for the `branches_sharing_code` lint
Fixes#7053Fixes#7054
And an additional CSS adjustment to support dark mode for every inline code. It currently only works in paragraphs, which was an oversight on my part 😅. [Current Example](https://rust-lang.github.io/rust-clippy/master/index.html#blacklisted_name)
This also includes ~50 lines of doc comments and is therefor not as big as the changes would indicate. 🐧
---
changelog: none
All of these bugs were introduced in this dev version and are therefor not worth a change log entry.
r? `@phansch`
cc: `@camsteffen` since you have a pretty good overview of the `SpanlessEq` implementation 🙃
Add `cloned_instead_of_copied` lint
Don't go cloning all willy-nilly.
Featuring a new `get_iterator_item_ty` util!
changelog: Add cloned_instead_of_copied lint
Closes#3870
Fix: redundant_pattern_matching drop order
Fixes#5746
A note about the change in drop order is added when the scrutinee (or any temporary in the expression) isn't known to be safe to drop in any order (i.e. doesn't implement the `Drop` trait, or contain such a type). There is a whitelist for some `std` types, but it's incomplete. Currently just `Vec<_>`, `Box<_>`, `Rc<_>` and `Arc<_>`, but only if the contained type is also safe to drop in any order.
Another lint for when the drop order changes could be added as allowed by default, but the drop order requirement is pretty subtle in this case. I think the note added to the lint should be enough to make someone think before applying the change.
changelog: Added a note to `redundant_pattern_matching` when the change in drop order might matter
Improve `map_entry` suggestion
fixes: #5176fixes: #4674fixes: #4664fixes: #1450
Still need to handle the value returned by `insert` correctly.
changelog: Improve `map_entry` suggestion. Will now suggest `or_insert`, `insert_with` or `match _.entry(_)` as appopriate.
changelog: Fix `map_entry` false positives where the entry api can't be used. e.g. when the map is used for multiple things.
Don't allow adjustments for `manual_map`
fixes: #7077
The other option here would be to add the return type to the closure. It would be fine for simple types, but longer types can be rather unwieldy. Could also implement the adjustment manually.
changelog: Don't lint `manual_map` when type adjustments are added. e.g. autoderef
Fix false positives where the map is used before inserting into the map.
Fix false positives where two insertions happen.
Suggest using `if let Entry::Vacant(e) = _.entry(_)` when `or_insert` might be a semantic change
tabs_in_doc_comments: Fix ICE due to char indexing
This is a quick-fix for an ICE in `tabs_in_doc_comments`. The problem
was that we we're indexing into possibly multi-byte characters, such as '位'.
More specifically `get_chunks_of_tabs` was returning indices into
multi-byte characters. Those were passed on to a `Span` creation that
then caused the ICE.
This fix makes sure that we don't return indices that point inside a
multi-byte character. *However*, we are still iterating over unicode
codepoints, not grapheme clusters. So a seemingly single character like y̆ ,
which actually consists of two codepoints, will probably still cause
incorrect spans in the output. But I don't think we handle those cases
anywhere in Clippy currently?
Fixes#5835
changelog: Fix ICE in `tabs_in_doc_comments`
Fix FP in `wrong_self_convention` lint
Previously, this lint didn't check into impl block when it was implementing a trait.
Recent improvements (#6924) have moved this check and some impl blocks are now checked but they shouldn't, such as in #7032.
Fixes#7032
changelog: Fix FP when not taking `self` in impl block for `wrong_self_convention` lint
Deprecate `filter_map`
Since #6591, `filter_map` does not even lint `filter().map()`. The cases that are still linted make no sense IMO. So this just removes/deprecates it.
changelog: Deprecate `filter_map` lint
Closes#3424Fixes#7050
Fix FP in `single_component_path_imports` lint
Fix FP in `single_component_path_imports` lint when the import is reused with `self`, like in `use self::module`.
Fixes#5210
changelog: none
Invalid null usage v2
This is continuation of #6192 after inactivity.
I plan to move paths into the compiler as diagnostic items after this is merged.
fixes#1703
changelog: none
consider mutability on useless_vec suggestions
fixes#7035
changelog: Now the suggested by `useless_vec` considers mutability to suggest either `&[]`, as before, or `&mut []` if the used reference is mutable.
This is a quick-fix for an ICE in `tabs_in_doc_comments`. The problem
was that we we're indexing into possibly multi-byte characters, such as '位'.
More specifically `get_chunks_of_tabs` was returning indices into
multi-byte characters. Those were passed on to a `Span` creation that
then caused the ICE.
This fix makes sure that we don't return indices that point inside a
multi-byte character. *However*, we are still iterating over unicode
codepoints, not grapheme clusters. So a seemingly single character like y̆ ,
which actually consists of two codepoints, will probably still cause
incorrect spans in the output.
Don't trigger `same_item_push` if the vec is used in the loop body
fixes#6987
changelog: `same_item_push`: Don't trigger if the `vec` is used in the loop body
fix `missing_panics_doc` not detecting `assert_eq!` and `assert_ne!`
fixes#6997
changelog: `missing_panics_doc` detects `assert_eq!` and `assert_ne!`
---
searching for `assert_eq!` and `assert_ne!` in `FindPanicUnwrap`
New Lint: `branches_sharing_code`
This lint checks if all `if`-blocks contain some statements that are the same and can be moved out of the blocks to prevent code duplication. Here is an example:
```rust
let _ = if ... {
println!("Start"); // <-- Lint for code duplication
let _a = 99;
println!("End"); // <-- Lint for code duplication
false
} else {
println!("Start");
let _b = 17;
println!("End");
false
};
```
This could be written as:
```rust
println!("Start");
let _ = if ... {
let _a = 99;
false
} else {
let _b = 17;
false
};
println!("End");
```
---
This lint will get masked by the `IF_SAME_THEN_ELSE` lint. I think it makes more sense to only emit one lint per if block. This means that the folloing example:
```rust
if ... {
let _a = 17;
} else {
let _a = 17;
}
```
Will only trigger the `IF_SAME_THEN_ELSE` lint and not the `SHARED_CODE_IN_IF_BLOCKS` lint.
---
closes: #5234
changelog: Added a new lint: `branches_sharing_code`
And hello to the one that is writing the changelog for this release :D
Remove author requirement for `cargo_common_metadata`
This PR follows https://github.com/rust-lang/cargo/pull/9282, I'm not fully informed about all of this, it would be great if somebody knowledgeable about this topic agrees.
changelog: Changed `cargo_common_metadata` to stop linting on the optional author field.
* Added expression check for shared_code_in_if_blocks
* Finishing touches for the shared_code_in_if_blocks lint
* Applying PR suggestions
* Update lints yay
* Moved test into subfolder
Fix `redundant_clone` fp
fixes: #5973fixes: #5595fixes: #6998
changelog: Fix `redundant_clone` fp where the cloned value is modified while the clone is in use.
Lint: filter(Option::is_some).map(Option::unwrap)
Fixes#6061
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog:
* add new lint for filter(Option::is_some).map(Option::unwrap)
First Rust PR, so I'm sure I've violated some idioms. Happy to change anything.
I'm getting one test failure locally -- a stderr diff for `compile_test`. I'm having a hard time seeing how I could be causing it, so I'm tentatively opening this in the hopes that it's an artifact of my local setup against `rustc`. Hoping it can at least still be reviewed in the meantime.
I'm gathering that since this is a method lint, and `.filter(...).map(...)` is already checked, the means of implementation needs to be a little different, so I didn't exactly follow the setup boilerplate. My way of checking for method calls seems a little too direct (ie, "is the second element of the expression literally the path for `Option::is_some`?"), but it seems like that's how some other lints work, so I went with it. I'm assuming we're not concerned about, eg, closures that just end up equivalent to `Option::is_some` by eta reduction.
disable upper_case_acronyms for pub items - enum edition
Fixes https://github.com/rust-lang/rust-clippy/issues/6803 (again... 😅 )
My previous fix did not work for enums because enum variants were checked separately in the `check_variant` function but it looks like we can't use that because we can't tell if the enum the variants belong to is declared as public or not (it always said `Inherited` for me)
I went and special-cased enums and iterated over all the variants "manually", but only, if the enums is not public.
---
changelog: fix upper_case_acronyms still firing on public enums (#6803)
Refactor types
r? `@flip1995`
This is the last PR to close#6724🎉
Also, this fixes#6936.
changelog: `vec_box`: Fix FN in `const` or `static`
changelog: `linkedlist`: Fix FN in `const` or `static`
changelog: `option_option`: Fix FN in `const` or `static`
Improve `clone_on_copy`
This also removes the `clone_on_copy_mut` test as the same thing is covered in the `clone_on_copy` test.
changelog: `copy_on_clone` lint on chained method calls taking self by value
changelog: `copy_on_clone` only lint when using the `Clone` trait
changelog: `copy_on_clone` correct suggestion when the cloned value is a macro call.
Lint on `_.clone().method()` when method takes self by value
Set applicability correctly
Correct suggestion when the cloned value is a macro call. e.g. `m!(x).clone()`
Don't lint when not using the `Clone` trait
Improve `expl_impl_clone_on_copy`
fixes: #1254
changelog: Check to see if the generic constraints are the same as if using derive for `expl_impl_clone_on_copy`
`len_without_is_empty` improvements
fixes: #6958fixes: #6972
changelog: Check the return type of `len`. Only integral types, or an `Option` or `Result` wrapping one.
changelog: Ensure the return type of `is_empty` matches. e.g. `Option<usize>` -> `Option<bool>`
Check the return type of `len`. Only integral types, or an `Option` or `Result` wrapping one.
Ensure the return type of `is_empty` matches. e.g. `Option<usize>` -> `Option<bool>`
When the character next to `{}` is "shifted" (when mapping a byte index
in the format string to span) we should avoid shifting the span end
index, so first map the index of `}` to span, then bump the span,
instead of first mapping the next byte index to a span (which causes
bumping the end span too much).
Regression test added.
Fixes#83344
Fix bad suggestion when a reborrow might be required
Fix bad suggestion when the value being sliced is a macro call
Don't lint inside of a macro due to the previous context sensitive changes
search_is_some: add checking for `is_none()`
fixes: #6815
changelog: search_is_some: add checking for `is_none()`.
To be honest I don't know what is the process of renaming the lints. Appreciate any feedback if that needs to be handled differently. Thanks!
Fix bad suggestion for `match_single_binding` lint
Fix a bad suggestion that needs curly braces when the target `match` is the body of an arm.
Fixes#6572
changelog: none
`match_wildcard` improvements
fixes: #6604fixes: #5733fixes: #6862#5733 is only fixed in the normal case, if different paths are used for the variants then the same problem will occur. It's cause by `def_path_str` returning an utterly useless result. I haven't dug into why yet.
For #6604 there should be some discussion before accepting this. It's easy enough to change the message rather than disable the lint for `Option` and `Result`.
changelog: Attempt to find a common path prefix for `match_wildcard_for_single_variants` and `wildcard_enum_match_arm`
changelog: Don't lint op `Option` and `Result` for `match_wildcard_for_single_variants` and `wildcard_enum_match_arm`
changelog: Consider `or` patterns and `Self` prefix for `match_wildcard_for_single_variants` and `wildcard_enum_match_arm`
Don't lint on `Result` and `Option` types.
Considers `or` patterns.
Considers variants prefixed with `Self`
Suggestions will try to find a common prefix rather than just using the full path
Write literal suggestion
fixes: #6768
changelog: Add suggestion to `write_literal` and `print_literal` lints
changelog: Change `use_debug` to point only at the format string
wrong_self_convention: fix lint in case of `to_*_mut` method
fixes#6758
changelog: wrong_self_convention: fix lint in case of `to_*_mut` method. When a method starts with `to_` and ends with `_mut`, clippy expects a `&mut self` parameter, otherwise `&self`.
Any feedback is welcome. I was also thinking if shouldn't we treat `to_` the same way as `as_`. Namely to accept `self` taken: `&self` or `&mut self`.
replace span_lint with span_lint_and_sugg along with error message
fixes: #6874
changelog: none
apologies if this may not be the most idiomatic way of doing it, any advice on changes (if any) would be greatly appreciated.
mem_replace_with_default: recognize some std library ctors
fixes#6562
changelog: mem_replace_with_default: recognize some common constructors equivalent to `Default::default()`
Fix suggestion for `explicit_deref_methods`. Sometimes `&**` is needed, sometimes nothing is needed.
Allow `explicit_deref_methods` to trigger in a few new contexts.
`explicit_deref_methods` will now consider ufcs calls
Fix false positives on procedural macros of `missing_inline_in_public_items` lint
Fixes#6486.
changelog: Fix false positives on procedural macros of `missing_inline_in_public_items` lint.
Fix ICE 6840 - make is_normalizable more strict
fixes#6840
make `is_normalizable` more strict, which should catch this ICE and related cases
changelog: Fix ICE in [`zero_sized_map_values`]
Let Cargo track CLIPPY_ARGS
This PR makes `clippy-driver` emit `CLIPPY_ARGS` in its `dep-info` output.
Just like #6441, this allows this workflow to work:
```shell
cargo clippy # warning: empty `loop {}` wastes CPU cycles
cargo clippy -- -A clippy::empty_loop # no warnings emitted
```
But without rebuilding all dependencies.
cc https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/CLIPPY_ARGS.20is.20not.20tracked.20by.20Cargo/near/228599088
changelog: Cargo now re-runs Clippy if arguments after `--` provided to `cargo clippy` are changed.
Compare empty blocks for equality based on tokens
fixes: #1390
This only considers empty blocks for now, though we should also catch something like this:
```rust
match 0 {
0 => {
do_something();
trace!(0);
0
}
1 => {
do_something();
trace!(1);
1
}
x => x,
}
```
As far as I can tell there aren't any negative effects on other lints. These blocks only happen to be the same for a given compilation, not all compilations.
changelog: Fix `match_on_same_arms` and others. Only consider empty blocks equal if the tokens contained are the same.
Fix `manual_map` false positives
fixes: #6795fixes: #6797fixes: #6811fixes: #6819
changelog: Fix false positives for `manual_map` when `return`, `break`, `continue`, `yield`, `await`, and partially moved values are used.
changelog: Don't expand macros in suggestions for `manual_map`
lint message should not start with uppercase letters
lint messages should not have punctuation at the end of the last line
https://rustc-dev-guide.rust-lang.org/diagnostics.html#diagnostic-structure
The test reads through all the .stderr files in the testsuit and checks lint messages that start with "help: ", "error: " etc.
There is also an exception list for special messages that are deemed acceptable.
changelog: make sure lint messages conform with the rustc dev guide and add test
Fix false positive for unit_arg lint
Fixes#6447
To avoid false positives don't complain about unit args when they come from a path expression, e.g. a local variable.
**Note:** This is my first contribution to Clippy, so I might have messed up somewhere. Any feedback is welcome and I'm happy to work out any kinks.
---
changelog: Do not lint unit arguments when they come from a path expression.
or_fun_call: fix suggestion for `or_insert(vec![])`
fixes#6748
changelog: or_fun_call: fix suggestion for `or_insert(vec![])` on `std::collections::hash_map::Entry` or `std::collections::btree_map::Entry`
Applies for `std::collections::hash_map::Entry` and `std::collections::btree_map::Entry`
Example:
Previously, for the following code:
`let _ = hash_map.entry("test".to_owned()).or_insert(vec![]);`
clippy would suggest to use:
`or_insert_with(vec![])`, which causes a compiler error (E0277).
Now clippy suggests:
`or_insert_with(Vec::new)`
move upper_case_acronyms back to style, but make the default behaviour less aggressive by default (can be unleashed via config option)
Previous discussion in the bi-weekly clippy meeting for reference: https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/Meeting.202021-02-23/near/227458019
Move the `upper_case_acronyms` lint back to the style group.
Only warn on fully-capitalized names by default.
Add add a clippy-config option `upper-case-acronyms-aggressive: true/false` to enabled more aggressive linting on
all substrings that could be capitalized acronyms.
---
changelog: reenable upper_case_acronyms by default but make the more aggressive linting opt-in via config option
Inconsistent struct constructor
fixes: #6352
r? `@matthiaskrgr`
I added the lint that checks for the struct constructors where the order of the field init shorthands is inconsistent with that in the struct definition.
changelog: Add style lint: `inconsistent_struct_constructor`
Fix FP in inherent_to_string when the function has generic parameters
Minimal example of the false positive:
````
struct G;
impl G {
fn to_string<const _N: usize>(&self) -> String {
"G.to_string()".to_string()
}
}
fn main() {
let g = G;
g.to_string::<1>();
}
````
Clippy emits an `inherent_to_string` warning, and suggests that we implement `Display` for `G` instead. However, this is not possible, since the generic parameter _N only exists in this function, not in `G` itself. This particular example uses const generics, which is where the issue is most likely to come up, but this PR skips the lint if the `to_string` function has any kind of generic parameters.
changelog: Fix FP in `inherent_to_string`
Teach SpanlessEq binding IDs
changelog: Fix collapsible_match false positive
Fixes#6740
This PR changes the way `SpanlessEq` determines whether two local variables are the same. Instead of checking that the names match, it checks that the `HirId`s match. If local bindings are declared within the expressions that are being compared, `SpanlessEq` will remember bindings that correspond to each other in a `FxHashMap<HirId, HirId>`. This makes `SpanlessEq` more flexible while also fixing false positives.
Example: `{ let x = 1; x + 2 }` is equal to `{ let y = 1; y + 2 }`.
CC `@xFrednet` I think this will resolve some concerns in #6463
Add the from_str_radix_10 lint
changelog: added the new `from_str_radix_10` which sometimes replaces calls to `primitive::from_str_radix` to `str::parse`
This is ready to be merged, although maybe the category should be `pedantic` instead of `style`? I'm not sure where it fits better.
Closes#6713.
Fix for issue 6640
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: unnecessary_wraps will now suggest to remove unnecessary wrapped return unit type, like Option<()>
fixes#6640
New lint: default_numeric_fallback
fixes#6064
r? `@flip1995`
As we discussed in [here](https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/Issue.20.236064/near/224647188) and [here](https://rust-lang.zulipchat.com/#narrow/stream/257328-clippy/topic/Issue.20clippy.236064/near/224746333), I start implementing this lint from the strictest version.
In this PR, I'll allow the below two cases to pass the lint to reduce FPs.
1. Appearances of unsuffixed numeric literals in `Local` if `Local` has a type annotation, for example:
```rust
// Good.
let x: i32 = 1;
// Also good.
let x: (i32, i32) = if cond {
(1, 2)
} else {
(2, 3)
};
```
2. Appearances of unsuffixed numeric literals in args of `Call` or `MethodCall` if corresponding arguments of their signature have concrete types, for example:
```rust
fn foo_mono(x: i32) -> i32 {
x
}
fn foo_poly<T>(t: T) -> t {
t
}
// Good.
let x = foo_mono(13);
// Still bad.
let x: i32 = foo_poly(13);
```
changelog: Added restriction lint: `default_numeric_fallback`
These updates allow us to specify multiple testnames for `TESTNAME`.
The new version of compiletest-rs also includes `bless` support, but is
not enabled with this PR.
Do not lint when the closure is called using an iterator
Fix FP when the closure is used in an iterator for `blocks_in_if_conditions` lint
FIxes: #1141
changelog: none
Rework use_self impl based on ty::Ty comparison #3410 | Take 2
This builds on top of #5531
I already reviewed and approved the commits by `@montrivo.` So only the review of my commits should be necessary.
I would also appreciate your review `@montrivo,` since you are familiar with the challenges here.
Fixes#3410 and Fixes#4143 (same problem)
Fixes#2843Fixes#3859Fixes#4734 and fixes#6221Fixes#4305Fixes#5078 (even at expression level now 🎉)
Fixes#3881 and Fixes#4887 (same problem)
Fixes#3909
Not yet: #4140 (test added)
All the credit for the fixes goes to `@montrivo.` I only refactored and copy and pasted his code.
changelog: rewrite [`use_self`] lint and fix multiple (8) FPs. One to go.
Fix suggestions that need parens in `from_iter_instead_of_collect` lint
Fixes broken suggestions that need parens (i.e.: range)
Fixes: #6648
changelog: none
This renames the variants in HIR UnOp from
enum UnOp {
UnDeref,
UnNot,
UnNeg,
}
to
enum UnOp {
Deref,
Not,
Neg,
}
Motivations:
- This is more consistent with the rest of the code base where most enum
variants don't have a prefix.
- These variants are never used without the `UnOp` prefix so the extra
`Un` prefix doesn't help with readability. E.g. we don't have any
`UnDeref`s in the code, we only have `UnOp::UnDeref`.
- MIR `UnOp` type variants don't have a prefix so this is more
consistent with MIR types.
- "un" prefix reads like "inverse" or "reverse", so as a beginner in
rustc code base when I see "UnDeref" what comes to my mind is
something like "&*" instead of just "*".
disallowed_methods: Support functions in addition to methods
## Context:
Hey all! I have a particular use case where I'd like to ban certain functions in a code base I work on. For example, I want to ban `Instant::now()` (among others) as we have a time service for mocking time in deterministic simulation tests. Obviously, it doesn't make sense to include a lint like this for all clippy users. Imagine my excitement when I spotted the new `disallowed_methods` lint in clippy--perfect! Unfortunately, after playing around with it for a bit, I was frustrated to realize that it didn't support functions like `Instant::now()`, so I've added support for them in this PR.
It might also make sense to rename the lint from `disallowed_methods` -> `disallowed_functions`, though I've held off from including that rename in this change, since I'm unsure of clippy's breaking change policy.
## Change
Support functions in addition to methods. In other words, support:
`disallowed_methods = ["alloc::vec::Vec::new"]` (a function) in addition to
`disallowed_methods = ["alloc::vec::Vec::leak"]` (a method).
Improve the documentation to clarify that users must specify the full qualified path for each disallowed function, which can be confusing for reexports. Include an example `clippy.toml`.
Simplify the actual lint pass so we can reuse `utils::fn_def_id`.
changelog: disallowed_method: Now supports functions in addition to methods
Add new lint `filter_map_identity`
<!--
Thank you for making Clippy better!
We're collecting our changelog from pull request descriptions.
If your PR only includes internal changes, you can just write
`changelog: none`. Otherwise, please write a short comment
explaining your change.
If your PR fixes an issue, you can add "fixes #issue_number" into this
PR description. This way the issue will be automatically closed when
your PR is merged.
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
[lint_naming]: https://rust-lang.github.io/rfcs/0344-conventions-galore.html#lints
Note that you can skip the above if you are just opening a WIP PR in
order to get feedback.
Delete this line and everything above before opening your PR.
-->
This commit adds a new lint named filter_map_identity.
This lint is the same as `flat_map_identity` except that it checks for the usage of `filter_map`.
---
Closes#6643
changelog: Added a new lint: `filter_map_identity`
Adds a new lint that checks if there is a semicolon on the last block statement if it returns nothing
changelog: Added a new lint: `SEMICOLON_IF_NOTHING_RETURNED`
fixes#6467
Adds the `SEMICOLON_IF_NOTHING_RETURNED` lint and therefore closes#6467.
This commit adds a new lint named `filter_map_identity`. This lint is
the same as `flat_map_identity` except that it checks for `filter_map`.
Closes#6643
Do not check if clippy version matches rustc version when runnning tests inside the rustc repo.
This makes sure that upstream rustc maintainers do not have to deal with our test failing/mismatching versions
when the rustc version bump is happening.
cc #6683
In other words, support:
`disallowed_methods = ["alloc::vec::Vec::new"]` (a free function) in
addition to
`disallowed_methods = ["alloc::vec::Vec::leak"]` (a method).
Improve the documentation to clarify that users must specify the full
qualified path for each disallowed function, which can be confusing for
reexports. Include an example `clippy.toml`.
Simplify the actual lint pass so we can reuse `utils::fn_def_id`.
New Lint: Manual Flatten
This is a draft PR for [Issue 6564](https://github.com/rust-lang/rust-clippy/issues/6564).
r? `@camsteffen`
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
---
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Add new lint [`manual_flatten`] to check for loops over a single `if let` expression with `Result` or `Option`.
Fix file names of flat_map_identity test
This patch fixes the file names of the `flat_map_identity` test.
Previously, their names were started with `unnecessary_flat_map` even though the lint rule name is `flat_map_identity`. This inconsistency happened probably because the rule name was changed during the discussion in the PR where this rule was introduced.
ref: https://github.com/rust-lang/rust-clippy/pull/4231
changelog: none
This commit fixes the file names of the `flat_map_identity` test.
Previously, their names were started with `unnecessary_flat_map` even
though the lint rule name is `flat_map_identity`. This inconsistency
happened probably because the rule name was changed during the
discussion in the PR where this rule was introduced.
ref: https://github.com/rust-lang/rust-clippy/pull/4231
Fix let_and_return false positive
The issue:
See this Rust playground link: https://play.rust-lang.org/?edition=2018&gist=12cb5d1e7527f8c37743b87fc4a53748
Run the above with clippy to see the following warning:
```
warning: returning the result of a `let` binding from a block
--> src/main.rs:24:5
|
23 | let value = Foo::new(&x).value();
| --------------------------------- unnecessary `let` binding
24 | value
| ^^^^^
|
= note: `#[warn(clippy::let_and_return)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return
help: return the expression directly
|
23 |
24 | Foo::new(&x).value()
|
```
Implementing the suggested fix, removing the temporary let binding,
yields a compiler error:
```
error[E0597]: `x` does not live long enough
--> src/main.rs:23:14
|
23 | Foo::new(&x).value()
| ---------^^-
| | |
| | borrowed value does not live long enough
| a temporary with access to the borrow is created here ...
24 | }
| -
| |
| `x` dropped here while still borrowed
| ... and the borrow might be used here, when that temporary is dropped and runs the `Drop` code for type `Foo`
|
= note: the temporary is part of an expression at the end of a block;
consider forcing this temporary to be dropped sooner, before the block's local variables are dropped
help: for example, you could save the expression's value in a new local variable `x` and then make `x` be the expression at the end of the block
|
23 | let x = Foo::new(&x).value(); x
| ^^^^^^^ ^^^
```
The fix:
Of course, clippy looks like it should already handle this edge case;
however, it appears `utils::fn_def_id` is not returning a `DefId` for
`Foo::new`. Changing the `qpath_res` lookup to use the child Path
`hir_id` instead of the parent Call `hir_id` fixes the issue.
changelog: none
Implement Rust 2021 panic
This implements the Rust 2021 versions of `panic!()`. See https://github.com/rust-lang/rust/issues/80162 and https://github.com/rust-lang/rfcs/pull/3007.
It does so by replacing `{std, core}::panic!()` by a bulitin macro that expands to either `$crate::panic::panic_2015!(..)` or `$crate::panic::panic_2021!(..)` depending on the edition of the caller.
This does not yet make std's panic an alias for core's panic on Rust 2021 as the RFC proposes. That will be a separate change: c5273bdfb2 That change is blocked on figuring out what to do with https://github.com/rust-lang/rust/issues/80846 first.
Do not lint when range is completely included into another one
This fix has been developed following this [comment](https://github.com/rust-lang/rust-clippy/issues/5986#issuecomment-703313548).
So this will be linted:
```
|----------|
|-----------|
```
Now this won't be linted:
```
|---|
|--------------------|
```
and this will still lint:
```
|--------|
|--------------|
```
Fixes: #5986
changelog: Fix FPs in match_overlapping_arm, when first arm is completely included in second arm
The issue:
See this Rust playground link: https://play.rust-lang.org/?edition=2018&gist=12cb5d1e7527f8c37743b87fc4a53748
Run the above with clippy to see the following warning:
```
warning: returning the result of a `let` binding from a block
--> src/main.rs:24:5
|
23 | let value = Foo::new(&x).value();
| --------------------------------- unnecessary `let` binding
24 | value
| ^^^^^
|
= note: `#[warn(clippy::let_and_return)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#let_and_return
help: return the expression directly
|
23 |
24 | Foo::new(&x).value()
|
```
Implementing the suggested fix, removing the temporary let binding,
yields a compiler error:
```
error[E0597]: `x` does not live long enough
--> src/main.rs:23:14
|
23 | Foo::new(&x).value()
| ---------^^-
| | |
| | borrowed value does not live long enough
| a temporary with access to the borrow is created here ...
24 | }
| -
| |
| `x` dropped here while still borrowed
| ... and the borrow might be used here, when that temporary is dropped and runs the `Drop` code for type `Foo`
|
= note: the temporary is part of an expression at the end of a block;
consider forcing this temporary to be dropped sooner, before the block's local variables are dropped
help: for example, you could save the expression's value in a new local variable `x` and then make `x` be the expression at the end of the block
|
23 | let x = Foo::new(&x).value(); x
| ^^^^^^^ ^^^
```
The fix:
Of course, clippy looks like it should already handle this edge case;
however, it appears `utils::fn_def_id` is not returning a `DefId` for
`Foo::new`. Changing the `qpath_res` lookup to use the child Path
`hir_id` instead of the parent Call `hir_id` fixes the issue.
Similar names ignore underscore prefixed names
changelog: Ignore underscore-prefixed names for similar_names
IMO, this lint is not very helpful for underscore-prefixed variables. Usually they are unused or are just there to ignore part of a destructuring.
Fix formatting for removed lints
- Don't add backticks for the reason a lint was removed. This is almost
never a code block, and when it is the backticks should be in the reason
itself.
- Don't assume clippy is the only tool that needs to be checked for
backwards compatibility
I split this out of https://github.com/rust-lang/rust/pull/80527/ because it kept causing tests to fail, and it's a good change to have anyway.
r? `@flip1995`
Doc markdown
I added "WebGL" along the lines of the existing "OpenGL" to the whitelist of `doc_markdown` as I found this to be a pretty common term.
(this is a follow-up of the now closed https://github.com/rust-lang/rust-clippy/pull/6388)
changelog: Whitelist "WebGL" in `doc_markdown`.
Fix false positive in write_literal and print_literal (numeric literals)
changelog: No longer lint numeric literals in [`write_literal`] and [`print_literal`].
Fixes#6335
Fix the reversed suggestion message of `stable_sort_primitive`.
Now Clippy emits `stable_sort_primitive` warning as follows:
```
warning: used sort instead of sort_unstable to sort primitive type `usize`
--> src\asm.rs:41:13
|
41 | self.successors.sort();
| ^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.successors.sort_unstable()`
|
= note: `#[warn(clippy::stable_sort_primitive)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#stable_sort_primitive
```
I think the position of `sort` and `sort_unstable` in the first line should be reversed.
changelog: Fix the reversed suggestion message of `stable_sort_primitive`.
Fix path_to_res for enum inherent items
changelog: none
I tried to add `Option::is_some` to the paths but got a false positive from the invalid paths lint. Turns out the `path_to_res` function does not find inherent impls for enums. I fixed this and took the liberty to do some additional cleanup in the method.
It is fairly common to divide some length in bytes by the byte-size of a
single element before creating a `from_raw_parts` slice or similar
operation. This lint would erroneously disallow such expressions.
Just in case, instead of simply disabling this lint in the RHS of a
division, keep track of the inversion and enable it again on recursive
division.
