# Objective
Hello! I am adopting #11022 to resolve conflicts with `main`. tldr: this
removes `scale` in favour of `scaling_mode`. Please see the original PR
for explanation/discussion.
Also relates to #2580.
## Migration Guide
Replace all uses of `scale` with `scaling_mode`, keeping in mind that
`scale` is (was) a multiplier. For example, replace
```rust
scale: 2.0,
scaling_mode: ScalingMode::FixedHorizontal(4.0),
```
with
```rust
scaling_mode: ScalingMode::FixedHorizontal(8.0),
```
---------
Co-authored-by: Stepan Koltsov <stepan.koltsov@gmail.com>
# Objective
Reflection serialization can be difficult to debug. A lot of times a
type fails to be serialized and the user is left wondering where that
type came from.
This is most often encountered with Bevy's scenes. Attempting to
serialize all resources in the world will fail because some resources
can't be serialized.
For example, users will often get complaints about `bevy_utils::Instant`
not registering `ReflectSerialize`. Well, `Instant` can't be serialized,
so the only other option is to exclude the resource that contains it.
But what resource contains it? This is where reflection serialization
can get a little tricky (it's `Time<Real>` btw).
## Solution
Add the `debug_stack` feature to `bevy_reflect`. When enabled, the
reflection serializers and deserializers will keep track of the current
type stack. And this stack will be used in error messages to help with
debugging.
Now, if we unknowingly try to serialize `Time<Real>`, we'll get the
following error:
```
type `bevy_utils::Instant` did not register the `ReflectSerialize` type data. For certain types, this may need to be registered manually using `register_type_data` (stack: `bevy_time::time::Time<bevy_time::real::Real>` -> `bevy_time::real::Real` -> `bevy_utils::Instant`)
```
### Implementation
This makes use of `thread_local!` to manage an internal `TypeInfoStack`
which holds a stack of `&'static TypeInfo`. We push to the stack before
a type is (de)serialized and pop from the stack afterwards.
Using a thread-local should be fine since we know two (de)serializers
can't be running at the same time (and if they're running on separate
threads, then we're still good).
The only potential issue would be if a user went through one of the
sub-serializers, like `StructSerializer`. However, I don't think many
users are going through these types (I don't even know if we necessarily
want to keep those public either, but we'll save that for a different
PR). Additionally, this is just a debug feature that only affects error
messages, so it wouldn't have any drastically negative effect. It would
just result in the stack not being cleared properly if there were any
errors.
Lastly, this is not the most performant implementation since we now
fetch the `TypeInfo` an extra time. But I figured that for a debug tool,
it wouldn't matter too much.
### Feature
This also adds a `debug` feature, which enables the `debug_stack`
feature.
I added it because I think we may want to potentially add more debug
tools in the future, and this gives us a good framework for adding
those. Users who want all debug features, present and future, can just
set `debug`. If they only want this feature, then they can just use
`debug_stack`.
I also made the `debug` feature default to help capture the widest
audience (i.e. the users who want this feature but don't know they do).
However, if we think it's better as a non-default feature, I can change
it!
And if there's any bikeshedding around the name `debug_stack`, let me
know!
## Testing
Run the following command:
```
cargo test --package bevy_reflect --features debug_stack
```
---
## Changelog
- Added the `debug` and `debug_stack` features to `bevy_reflect`
- Updated the error messages returned by the reflection serializers and
deserializers to include more contextual information when the
`debug_stack` or `debug` feature is enabled
# Objective
`NoFrustumCulling` prevents meshes from being considered out of view
based on AABBs (sometimes useful for skinned meshes which don't
recalculate AABBs currently). it currently only applies for primary view
rendering, not for shadow rendering which can result in missing shadows.
## Solution
Add checks for `NoFrustumCulling` to `check_dir_light_mesh_visibility`
and `check_point_light_mesh_visibility` so that `NoFrustumCulling`
entities are rendered to all shadow views as well as all primary views.
# Objective
I noticed some issues in `screenshot` example:
1. Cursor icon won't return from `SystemCursorIcon::Progress` to default
icon, even though screen shot saving is done.
2. Panics when exiting window: ``called `Result::unwrap()` on an `Err`
value:
NoEntities("bevy_ecs::query::state::QueryState<bevy_ecs::entity::Entity,
bevy_ecs::query::filter::With<bevy_window:🪟:Window>>")``
## Solution
1. Caused by cursor updating system not responding to [`CursorIcon`
component
removal](5cfcbf47ed/examples/window/screenshot.rs (L38)).
I believe it should, so change it to react to
`RemovedComponents<CursorIcon>`. (a suggestion)
2. Use `get_single` for window.
## Testing
- run screenshot example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Improve robustness of state transitions. Currently events that should
be scoped to a specific state can leak between state scopes since events
live for two ticks.
- See https://github.com/bevyengine/bevy/issues/15072
## Solution
- Allow registering state scoped events that will be automatically
cleared when exiting a state. This is *most of the time* not obviously
useful, but enables users to write correct code that will avoid/reduce
edge conditions (such as systems that aren't state scoped polling for a
state scoped event and having unintended side effects outside a specific
state instance).
## Testing
Did not test.
---
## Showcase
Added state scoped events that will be automatically cleared when
exiting a state. Useful when you want to guarantee clean state
transitions.
Normal way to add an event:
```rust
fn setup(app: &mut App) {
app.add_event::<MyGameEvent>();
}
```
Add a state-scoped event (**NEW**):
```rust
fn setup(app: &mut App) {
app.add_state_scoped_event::<MyGameEvent>(GameState::Play);
}
```
# Objective
Smaller scoped version of #13375 without the `_mut` variants which
currently have unsoundness issues.
## Solution
Same as #13375, but without the `_mut` variants.
## Testing
- The same test from #13375 is reused.
---
## Migration Guide
- Renamed `FilteredEntityRef::components` to
`FilteredEntityRef::accessed_components` and
`FilteredEntityMut::components` to
`FilteredEntityMut::accessed_components`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
# Objective
Some of the new compile error messages are a little unclear (at least to
me). For example:
```
error[E0277]: `tests::foo::Bar` can not be created through reflection
--> crates/bevy_reflect/src/lib.rs:679:18
|
679 | #[derive(Reflect)]
| ^^^^^^^ the trait `from_reflect::FromReflect` is not implemented for `tests::foo::Bar`
|
= note: consider annotating `tests::foo::Bar` with `#[derive(Reflect)]` or `#[derive(FromReflect)]`
```
While the annotation makes it clear that `FromReflect` is missing, it's
not very clear from the main error message.
My IDE lists errors with only their message immediately present:
<p align="center">
<img width="700" alt="Image of said IDE listing errors with only their
message immediately present. These errors are as follows:
\"`tests::foo::Bar` can not be created through reflection\", \"The trait
bound `tests::foo::Bar: RegisterForReflection` is not satisfied\", and
\"The trait bound `tests::foo::Bar: type_info::MaybeTyped` is not
satisfied\""
src="https://github.com/user-attachments/assets/42c24051-9e8e-4555-8477-51a9407446aa">
</p>
This makes it hard to tell at a glance why my code isn't compiling.
## Solution
Updated all `on_unimplemented` attributes in `bevy_reflect` to mention
the relevant trait—either the actual trait or the one users actually
need to implement—as well as a small snippet of what not implementing
them means.
For example, failing to implement `TypePath` now mentions missing a
`TypePath` implementation. And failing to implement `DynamicTypePath`
now also mentions missing a `TypePath` implementation, since that's the
actual trait users need to implement (i.e. they shouldn't implement
`DynamicTypePath` directly).
Lastly, I also added some missing `on_unimplemented` attributes for
`MaybeTyped` and `RegisterForReflection` (which you can see in the image
above).
Here's how this looks in my IDE now:
<p align="center">
<img width="700" alt="Similar image as before showing the errors listed
by the IDE. This time the errors read as follows: \"`tests::foo::Bar`
does not implement `FromReflect` so cannot be reified through
reflection\", \"`tests::foo::Bar` does not implement
`GetTypeRegistration` so cannot be registered for reflection\", and
\"`tests::foo::Bar` does not implement `Typed` so cannot provide static
type information\""
src="https://github.com/user-attachments/assets/f6f8501f-0450-4f78-b84f-00e7a18d0533">
</p>
## Testing
You can test by adding the following code and verifying the compile
errors are correct:
```rust
#[derive(Reflect)]
struct Foo(Bar);
struct Bar;
```
# Objective
`ExtractedUiMaterialNode` is still walking the whole `UiStack`.
more info: https://github.com/bevyengine/bevy/pull/9853
## Solution
Retrieve the `stack_index` from the `Node` component instead.
Also changed the `stack_index` field of `ExtractedUiMaterialNode` to
`u32`.
# Objective
Make choosing of diffuse indirect lighting explicit, instead of using
numerical conditions like `all(indirect_light == vec3(0.0f))`, as using
that may lead to unwanted light leakage.
## Solution
Use an explicit `found_diffuse_indirect` condition to indicate the found
indirect lighting source.
## Testing
I have tested examples `lightmaps`, `irradiance_volumes` and
`reflection_probes`, there are no visual changes. For further testing,
consider a "cave" scene with lightmaps and irradiance volumes. In the
cave there are some purly dark occluded area, those dark area will
sample the irradiance volume, and that is easy to leak light.
Hello,
I'd like to contribute to this project by adding some useful constants
and improving the documentation for the AspectRatio struct. Here's a
summary of the changes I've made:
1. Added new constants for common aspect ratios:
- SIXTEEN_NINE (16:9)
- FOUR_THREE (4:3)
- ULTRAWIDE (21:9)
2. Enhanced the overall documentation:
- Improved module-level documentation with an overview and use cases
- Expanded explanation of the AspectRatio struct with examples
- Added detailed descriptions and examples for all methods (both
existing and new)
- Included explanations for the newly introduced constant values
- Added clarifications for From trait implementations
These changes aim to make the AspectRatio API more user-friendly and
easier to understand. The new constants provide convenient access to
commonly used aspect ratios, which I believe will be helpful in many
scenarios.
---------
Co-authored-by: Gonçalo Rica Pais da Silva <bluefinger@gmail.com>
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
# Objective
- Fixes#15060
## Solution
- Added `IdentityAssetTransformer<A>` which is an `AssetTransformer`
which infallibly returns the input `Asset` unmodified.
- Replaced `LoadAndSave` and `LoadAndSaveSettings` with type definitions
linking back to `LoadTransformAndSave` and
`LoadTransformAndSaveSettings` respectively.
- Marked `LoadAndSave` and `LoadAndSaveSettings` as depreciated with a
migration guide included, hinting to the user to use the underlying type
instead.
## Testing
- Ran CI locally
---
## Migration Guide
- Replace `LoadAndSave<L, S>` with `LoadTransformAndSave<L,
IdentityAssetTransformer<<L as AssetLoader>::Asset>, S>`
- Replace `LoadAndSaveSettings<L, S>` with
`LoadTransformAndSaveSettings<L, (), S>`
# Objective
- Improve the ergonomics of managing states.
## Solution
- Add `set_state` extension method to `Commands` so you don't need to
type out `ResMut<NextState<S>>` to update a state. It also reduces
system parameter list size when you already have `Commands`.
- I only updated a couple examples to showcase how it can be used. There
*is* a potential perf cost to introducing `Commands` so this method
shouldn't necessarily be used everywhere.
## Testing
- Tested the updated examples: `game_menu` and `alien_cake_addict`.
---
## Showcase
Add `Commands::set_state` method for easily updating states.
Set directly:
```rust
fn go_to_game(mut game_state: ResMut<NextState<GameState>>) {
game_state.set(GameState::Play);
}
```
Set with commands (**NEW**):
```rust
fn go_to_game(mut commands: Commands) {
commands.set_state(GameState::Play);
}
```
Adopted PR from dmlary, all credit to them!
https://github.com/bevyengine/bevy/pull/9915
Original description:
# Objective
The default value for `near` in `OrthographicProjection` should be
different for 2d & 3d.
For 2d using `near = -1000` allows bevy users to build up scenes using
background `z = 0`, and foreground elements `z > 0` similar to css.
However in 3d `near = -1000` results in objects behind the camera being
rendered. Using `near = 0` works for 3d, but forces 2d users to assign
`z <= 0` for rendered elements, putting the background at some arbitrary
negative value.
There is no common value for `near` that doesn't result in a footgun or
usability issue for either 2d or 3d, so they should have separate
values.
There was discussion about other options in the discord
[0](https://discord.com/channels/691052431525675048/1154114310042292325),
but splitting `default()` into `default_2d()` and `default_3d()` seemed
like the lowest cost approach.
Related/past work https://github.com/bevyengine/bevy/issues/9138,
https://github.com/bevyengine/bevy/pull/9214,
https://github.com/bevyengine/bevy/pull/9310,
https://github.com/bevyengine/bevy/pull/9537 (thanks to @Selene-Amanita
for the list)
## Solution
This commit splits `OrthographicProjection::default` into `default_2d`
and `default_3d`.
## Migration Guide
- In initialization of `OrthographicProjection`, change `..default()` to
`..OrthographicProjection::default_2d()` or
`..OrthographicProjection::default_3d()`
Example:
```diff
--- a/examples/3d/orthographic.rs
+++ b/examples/3d/orthographic.rs
@@ -20,7 +20,7 @@ fn setup(
projection: OrthographicProjection {
scale: 3.0,
scaling_mode: ScalingMode::FixedVertical(2.0),
- ..default()
+ ..OrthographicProjection::default_3d()
}
.into(),
transform: Transform::from_xyz(5.0, 5.0, 5.0).looking_at(Vec3::ZERO, Vec3::Y),
```
---------
Co-authored-by: David M. Lary <dmlary@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
Kind of confused why this wasn't breaking for me pre-`0.15-dev` since
nothing obvious seems to have changed in `wgpu` upstream, but this fixes
it and ensures that we return the correct sample type re: the actual
device.
# Objective
Simplify `pick_rounded_rect` with multiple `if` statements to make it
more readable and efficient([Godbolt
link](https://godbolt.org/z/W5vPEvT5c)).
Co-authored-by: WX\shixi <shixi1@cnwxsoft.com>
# Objective
We should attempt to document the entirety of bevy_assets. `AssetMode`
is missing docs explaining what it is, how it's used and why it exists.
## Solution
Add docs, focusing on the context in
https://github.com/bevyengine/bevy/issues/10157.
# Objective
Fixes: https://github.com/bevyengine/bevy/issues/14515
## Solution
Sorts the iterator with itertools' sorted_by function. This is required
given that 'self.entries' is an immutable &[Box<dyn PartialReflect]
which also doesn't implement Clone or Copy.
## Testing
The modifications passed the unit testing only after they were edited to
ensure that the items were in alphabetical order.
I haven't checked for performance implications.
Adds some methods to assist in building `ShaderStorageBuffer` without
using `bytemuck`. We keep the `&[u8]` constructors since this is still
modeled as a thin wrapper around the buffer descriptor, but should make
it easier to interact with at the cost of an extra allocation in the
`ShaderType` path for the buffer writer.
Follow up from #14663
# Objective
`EntityHash` and related types were moved from `bevy_utils` to
`bevy_ecs` in #11498, but seemed to have been accidentally reintroduced
a week later in #11707.
## Solution
Remove the old leftover code.
---
## Migration Guide
- Uses of `bevy::utils::{EntityHash, EntityHasher, EntityHashMap,
EntityHashSet}` now have to be imported from `bevy::ecs::entity`.
# Objective
It's possible to create UB using an implementation of `QueryFilter` that
performs mutable access, but that does not violate any documented safety
invariants.
This code:
```rust
#[derive(Component)]
struct Foo(usize);
// This derive is a simple way to get a valid WorldQuery impl. The QueryData impl isn't used.
#[derive(QueryData)]
#[query_data(mutable)]
struct BadFilter<'w> {
foo: &'w mut Foo,
}
impl QueryFilter for BadFilter<'_> {
const IS_ARCHETYPAL: bool = false;
unsafe fn filter_fetch(
fetch: &mut Self::Fetch<'_>,
entity: Entity,
table_row: TableRow,
) -> bool {
// SAFETY: fetch and filter_fetch have the same safety requirements
let f: &mut usize = &mut unsafe { Self::fetch(fetch, entity, table_row) }.foo.0;
println!("Got &mut at {f:p}");
true
}
}
let mut world = World::new();
world.spawn(Foo(0));
world.run_system_once(|query: Query<&Foo, BadFilter>| {
let f: &usize = &query.iter().next().unwrap().0;
println!("Got & at {f:p}");
query.iter().next().unwrap();
println!("Still have & at {f:p}");
});
```
prints:
```
Got &mut at 0x1924b92dfb0
Got & at 0x1924b92dfb0
Got &mut at 0x1924b92dfb0
Still have & at 0x1924b92dfb0
```
Which means it had an `&` and `&mut` alive at the same time.
The only `unsafe` there is around `Self::fetch`, but I believe that call
correctly upholds the safety invariant, and matches what `Added` and
`Changed` do.
## Solution
Make `QueryFilter` an unsafe trait and document the requirement that the
`WorldQuery` implementation be read-only.
## Migration Guide
`QueryFilter` is now an `unsafe trait`. If you were manually
implementing it, you will need to verify that the `WorldQuery`
implementation is read-only and then add the `unsafe` keyword to the
`impl`.
Since `StandardMaterial::emissive_exposure_weight` does not get packed
into the gbuffer in the deferred case, unpacking uses an implicit
default value for emissive's alpha channel.
This resulted in divergent behavior between the forward and deferred
renderers when using standard materials with default
emissive_exposure_weight, this value defaulting to `0.0` in the forward
case and `1.0` in the other.
This patch changes the implicit value in the deferred case to `0.0` in
order to match the behavior of the forward renderer. However, this still
does not solve the case where `emissive_exposure_weight` is not `0.0`.
# Objective
The `ser` and `de` modules in `bevy_reflect/serde` are very long and
difficult to navigate.
## Solution
Refactor both modules into many smaller modules that each have a single
primary focus (i.e. a `structs` module that only handles struct
serialization/deserialization).
I chose to keep the `ser` and `de` modules separate. We could have
instead broken it up kind (e.g. lists, maps, etc.), but I think this is
a little cleaner. Serialization and deserialization, while related, can
be very different. So keeping them separated makes sense for
organizational purposes.
That being said, if people disagree and think we should structure this a
different way, I am open to changing it.
Note that this PR's changes are mainly structural. There are a few
places I refactored code to reduce duplication and to make things a bit
cleaner, but these are largely cosmetic and shouldn't have any impact on
behavior.
### Other Details
This PR also hides a lot of the internal logic from being exported.
These were originally public, but it's unlikely they really saw any use
outside of these modules. In fact, you don't really gain anything by
using them outside of this module either.
By privatizing these fields and items, we also set ourselves up for more
easily changing internal logic around without involving a breaking
change.
I also chose not to mess around with tests since that would really blow
up the diff haha.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect --all-features
```
---
## Migration Guide
The fields on `ReflectSerializer` and `TypedReflectSerializer` are now
private. To instantiate, the corresponding constructor must be used:
```rust
// BEFORE
let serializer = ReflectSerializer {
value: &my_value,
registry: &type_registry,
};
// AFTER
let serializer = ReflectSerializer::new(&my_value, &type_registry);
```
Additionally, the following types are no longer public:
- `ArraySerializer`
- `EnumSerializer`
- `ListSerializer`
- `MapSerializer`
- `ReflectValueSerializer` (fully removed)
- `StructSerializer`
- `TupleSerializer`
- `TupleStructSerializer`
As well as the following traits:
- `DeserializeValue` (fully removed)
### Builder changes
- Increased meshlet max vertices/triangles from 64v/64t to 255v/128t
(meshoptimizer won't allow 256v sadly). This gives us a much greater
percentage of meshlets with max triangle count (128). Still not perfect,
we still end up with some tiny <=10 triangle meshlets that never really
get simplified, but it's progress.
- Removed the error target limit. Now we allow meshoptimizer to simplify
as much as possible. No reason to cap this out, as the cluster culling
code will choose a good LOD level anyways. Again leads to higher quality
LOD trees.
- After some discussion and consulting the Nanite slides again, changed
meshlet group error from _adding_ the max child's error to the group
error, to doing `group_error = max(group_error, max_child_error)`. Error
is already cumulative between LODs as the edges we're collapsing during
simplification get longer each time.
- Bumped the 65% simplification threshold to allow up to 95% of the
original geometry (e.g. accept simplification as valid even if we only
simplified 5% of the triangles). This gives us closer to
log2(initial_meshlet_count) LOD levels, and fewer meshlet roots in the
DAG.
Still more work to be done in the future here. Maybe trying METIS for
meshlet building instead of meshoptimizer.
Using ~8 clusters per group instead of ~4 might also make a big
difference. The Nanite slides say that they have 8-32 meshlets per
group, suggesting some kind of heuristic. Unfortunately meshopt's
compute_cluster_bounds won't work with large groups atm
(https://github.com/zeux/meshoptimizer/discussions/750#discussioncomment-10562641)
so hard to test.
Based on discussion from
https://github.com/bevyengine/bevy/discussions/14998,
https://github.com/zeux/meshoptimizer/discussions/750, and discord.
### Runtime changes
- cluster:triangle packed IDs are now stored 25:7 instead of 26:6 bits,
as max triangles per cluster are now 128 instead of 64
- Hardware raster now spawns 128 * 3 vertices instead of 64 * 3 vertices
to account for the new max triangles limit
- Hardware raster now outputs NaN triangles (0 / 0) instead of
zero-positioned triangles for extra vertex invocations over the cluster
triangle count. Shouldn't really be a difference idt, but I did it
anyways.
- Software raster now does 128 threads per workgroup instead of 64
threads. Each thread now loads, projects, and caches a vertex (vertices
0-127), and then if needed does so again (vertices 128-254). Each thread
then rasterizes one of 128 triangles.
- Fixed a bug with `needs_dispatch_remap`. I had the condition backwards
in my last PR, I probably committed it by accident after testing the
non-default code path on my GPU.
# Objective
A previous issue describes the same problem: #14248.
This particular link was seemingly missed by #14276.
## Solution
- Search repo for `bevyengine.org/learn/errors/#`
- Remove `#`
- Verify link goes to right place
# Objective
- Crate-level prelude modules, such as `bevy_ecs::prelude`, are plagued
with inconsistency! Let's fix it!
## Solution
Format all preludes based on the following rules:
1. All preludes should have brief documentation in the format of:
> The _name_ prelude.
>
> This includes the most common types in this crate, re-exported for
your convenience.
2. All documentation should be outer, not inner. (`///` instead of
`//!`.)
3. No prelude modules should be annotated with `#[doc(hidden)]`. (Items
within them may, though I'm not sure why this was done.)
## Testing
- I manually searched for the term `mod prelude` and updated all
occurrences by hand. 🫠
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- `CursorIcon` had derived `Reflect`, but it wasn't registered
## Solution
- Use `register_type` on it
- I also moved the cursor code to it's own plugin because there was
starting to be too much cursor code outside the cursor file.
## Testing
- window_settings example still works with the custom cursor
# Objective
#14957 added the `pick_rounded_rect` function to `bevy_ui` in the
`picking_backend` module, which is gated behind the `bevy_picking`
feature. This function is used in that module, as well as in the `focus`
module. The latter usage is not gated behind the `bevy_picking` feature,
causing a compile error when the feature is disabled.
## Solution
Move the `pick_rounded_rect` function out of the `picking_backend`
module, as it does not depend on anything defined in that module. I put
it in `lib.rs` but it could reasonably be moved somewhere else instead.
## Testing
Encountered this compile error in a project and confirmed that this
patch fixes it.
# Objective
Fixes#13479
This also fixes the gaps you can sometimes observe in outlines
(screenshot from main, not this PR):
<img width="636" alt="outline-gaps"
src="https://github.com/user-attachments/assets/c11dae24-20f5-4aea-8ffc-1894ad2a2b79">
The outline around the last item in each section has vertical gaps.
## Solution
Draw the outlines with corner radius using the existing border rendering
for uinodes. The outline radius is very simple to calculate. We just
take the computed border radius of the node, and if it's greater than
zero, add it to the distance from the edge of the node to the outer edge
of the node's outline.
---
## Showcase
<img width="634" alt="outlines-radius"
src="https://github.com/user-attachments/assets/1ecda26c-65c5-41ef-87e4-5d9171ddc3ae">
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
Correctly order picking events. Resolves
https://github.com/bevyengine/bevy/issues/5984.
## Solution
Event ordering [very long standing
problem](https://github.com/aevyrie/bevy_mod_picking/issues/294) with
mod picking, stemming from two related issues. The first problem was
that `Pointer<T>` events of different types couldn't be ordered, but we
have already gotten around that in the upstream by switching to
observers. Since observers run in the order they are triggered, this
isn't an issue.
The second problem was that the underlying event streams that picking
uses to create it's pointer interaction events *also* lacked ordering,
and the systems that generated the points couldn't interleave events.
This PR fixes that by unifying the event streams and integrating the
various interaction systems.
The concrete changes are as follows:
+ `bevy_winit::WinitEvent` has been moved to `bevy_window::WindowEvent`.
This provides a unified (and more importantly, *ordered*) input stream
for both `bevy_window` and `bevy_input` events.
+ Replaces `InputMove` and `InputPress` with `PointerInput`, a new
unified input event which drives picking and interaction. This event is
built to have drop-in forward compatibility with [winit's upcoming
pointer abstraction](https://github.com/rust-windowing/winit/pull/3876).
I have added code to emulate it using the current winit input
abstractions, but this entire thing will be much more robust when it
lands.
+ Rolls `pointer_events` `send_click_and_drag_events` and
`send_drag_over_events` into a single system, which operates directly on
`PointerEvent` and triggers observers as output.
The PR also improves docs and takes the opportunity to
refactor/streamline the pointer event dispatch logic.
## Status & Testing
This PR is now feature complete and documented. While it is
theoretically possible to add unit tests for the ordering, building the
picking mocking for that will take a little while.
Feedback on the chosen ordering of events is within-scope.
## Migration Guide
For users switching from `bevy_mod_picking` to `bevy_picking`:
+ Instead of adding an `On<T>` component, use `.observe(|trigger:
Trigger<T>|)`. You may now apply multiple handlers to the same entity
using this command.
+ Pointer interaction events now have semi-deterministic ordering which
(more or less) aligns with the order of the raw input stream. Consult
the docs on `bevy_picking::event::pointer_events` for current
information. You may need to adjust your event handling logic
accordingly.
+ `PointerCancel` has been replaced with `Pointer<Cancled>`, which now
has the semantics of an OS touch pointer cancel event.
+ `InputMove` and `InputPress` have been merged into `PointerInput`. The
use remains exactly the same.
+ Picking interaction events are now only accessible through observers,
and no `EventReader`. This functionality may be re-implemented later.
For users of `bevy_winit`:
+ The event `bevy_winit::WinitEvent` has moved to
`bevy_window::WindowEvent`. If this was the only thing you depended on
`bevy_winit` for, you should switch your dependency to `bevy_window`.
+ `bevy_window` now depends on `bevy_input`. The dependencies of
`bevy_input` are a subset of the existing dependencies for `bevy_window`
so this should be non-breaking.
# Objective
Fixes#15032
## Solution
Reimplement support for the `flip_x` and `flip_y` fields.
This doesn't flip the border geometry, I'm not really sure whether that
is desirable or not.
Also fixes a bug that was causing the side and center slices to tile
incorrectly.
### Testing
```
cargo run --example ui_texture_slice_flip_and_tile
```
## Showcase
<img width="787" alt="nearest"
src="https://github.com/user-attachments/assets/bc044bae-1748-42ba-92b5-0500c87264f6">
With tiling need to use nearest filtering to avoid bleeding between the
slices.
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- follow of #14049 ,we could use it on our Parallel Iterator,this pr
also unified the used function in both regular iter and parallel
iterations.
## Performance
no performance regression for regular itertaion
3.5X faster in hybrid parallel iteraion,this number is far greater than
the benefits obtained in regular iteration(~1.81) because mutable
iterations on continuous memory can effectively reduce the cost of
mataining core cache coherence
# Objective
As discussed in https://github.com/bevyengine/bevy/issues/7386, system
order ambiguities within `DefaultPlugins` are a source of bugs in the
engine and badly pollute diagnostic output for users.
We should eliminate them!
This PR is an alternative to #15027: with all external ambiguities
silenced, this should be much less prone to merge conflicts and the test
output should be much easier for authors to understand.
Note that system order ambiguities are still permitted in the
`RenderApp`: these need a bit of thought in terms of how to test them,
and will be fairly involved to fix. While these aren't *good*, they'll
generally only cause graphical bugs, not logic ones.
## Solution
All remaining system order ambiguities have been resolved.
Review this PR commit-by-commit to see how each of these problems were
fixed.
## Testing
`cargo run --example ambiguity_detection` passes with no panics or
logging!
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14593.
## Solution
- Add `ViewportConversionError` and return it from viewport conversion
methods on Camera.
## Testing
- I successfully compiled and ran all changed examples.
## Migration Guide
The following methods on `Camera` now return a `Result` instead of an
`Option` so that they can provide more information about failures:
- `world_to_viewport`
- `world_to_viewport_with_depth`
- `viewport_to_world`
- `viewport_to_world_2d`
Call `.ok()` on the `Result` to turn it back into an `Option`, or handle
the `Result` directly.
---------
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- Fixes#14966
## Solution
- Added a _Performance_ section to the documentation for
`LogPlugin::filter` explaining that long filter strings can degrade
performance and to instead rely on `LogPlugin::level` when possible.
## Testing
- CI passed locally.
# Objective
- Currently we have the `ColorRange` trait to interpolate linearly
between two colors
- It would be cool to have:
1. linear interpolation between n colors where `n >= 1`
2. other kinds of interpolation
## Solution
1. Implement `ColorGradient` which takes `n >= 1` colors and linearly
interpolates between consecutive pairs of them
2. Implement `Curve` intergration for this `ColorGradient` which yields
a curve struct. After that we can apply all of the cool curve adaptors
like `.reparametrize()` and `.map()` to the gradient
## Testing
- Added doc tests
- Added tests
## Showcase
```rust
// let gradient = ColorGradient::new(vec![]).unwrap(); // panic! 💥
let gradient = ColorGradient::new([basic::RED, basic::LIME, basic::BLUE]).expect("non-empty");
let curve = gradient.to_curve();
let brighter_curve = curve.map(|c| c.mix(&basic::WHITE, 0.5));
```
---
Kind of related to
https://github.com/bevyengine/bevy/pull/14971#discussion_r1736337631
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Co-authored-by: Matty <weatherleymatthew@gmail.com>
# Objective
Fixes https://github.com/bevyengine/bevy/issues/14183
## Solution
Reimplement the UI texture atlas slicer using a shader.
The problems with #14183 could be fixed more simply by hacking around
with the coordinates and scaling but that way is very fragile and might
get broken again the next time we make changes to the layout
calculations. A shader based solution is more robust, it's impossible
for gaps to appear between the image slices with these changes as we're
only drawing a single quad.
I've not tried any benchmarks yet but it should much more efficient as
well, in the worst cases even hundreds or thousands of times faster.
Maybe could have used the UiMaterialPipeline. I wrote the shader first
and used fat vertices and then realised it wouldn't work that way with a
UiMaterial. If it's rewritten it so it puts all the slice geometry in
uniform buffer, then it might work? Adding the uniform buffer would
probably make the shader more complicated though, so don't know if it's
even worth it. Instancing is another alternative.
## Testing
The examples are working and it seems to match the old API correctly but
I've not used the texture atlas slicing API for anything before, I
reviewed the PR but that was back in January.
Needs a review by someone who knows the rendering pipeline and wgsl
really well because I don't really have any idea what I'm doing.
# Objective
The `BorderRadius` component shouldn't be required to draw borders for
nodes with sharp corners.
## Solution
Make `BorderRadius` optional in `extract_uinode_borders`'s UI node
query.
# Objective
The `Parent` component holds a reference to the parent entity of the
entity it is inserted onto. The `with_child` function erroneously
forgets to insert this component onto the child entity that it spawns,
causing buggy behaviour when the function is used instead of the other
child-spawning functions.
## Solution
Ensure `with_child` inserts the `Parent` component, the same as all the
other child-spawning functions.
## Testing
Checked before/after with a bevy_ui layout where this patch fixed buggy
behaviour I was seeing in parent/child UI nodes.
# Objective
- Fixes#14969
## Solution
- Added `Deserialize` to the list of reflected traits for `SmolStr`
## Testing
- CI passed locally.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
This commit adds support for *masks* to the animation graph. A mask is a
set of animation targets (bones) that neither a node nor its descendants
are allowed to animate. Animation targets can be assigned one or more
*mask group*s, which are specific to a single graph. If a node masks out
any mask group that an animation target belongs to, animation curves for
that target will be ignored during evaluation.
The canonical use case for masks is to support characters holding
objects. Typically, character animations will contain hand animations in
the case that the character's hand is empty. (For example, running
animations may close a character's fingers into a fist.) However, when
the character is holding an object, the animation must be altered so
that the hand grips the object.
Bevy currently has no convenient way to handle this. The only workaround
that I can see is to have entirely separate animation clips for
characters' hands and bodies and keep them in sync, which is burdensome
and doesn't match artists' expectations from other engines, which all
effectively have support for masks. However, with mask group support,
this task is simple. We assign each hand to a mask group and parent all
character animations to a node. When a character grasps an object in
hand, we position the fingers as appropriate and then enable the mask
group for that hand in that node. This allows the character's animations
to run normally, while the object remains correctly attached to the
hand.
Note that even with this PR, we won't have support for running separate
animations for a character's hand and the rest of the character. This is
because we're missing additive blending: there's no way to combine the
two masked animations together properly. I intend that to be a follow-up
PR.
The major engines all have support for masks, though the workflow varies
from engine to engine:
* Unity has support for masks [essentially as implemented here], though
with layers instead of a tree. However, when using the Mecanim
("Humanoid") feature, precise control over bones is lost in favor of
predefined muscle groups.
* Unreal has a feature named [*layered blend per bone*]. This allows for
separate blend weights for different bones, effectively achieving masks.
I believe that the combination of blend nodes and masks make Bevy's
animation graph as expressible as that of Unreal, once we have support
for additive blending, though you may have to use more nodes than you
would in Unreal. Moreover, separating out the concepts of "blend weight"
and "which bones this node applies to" seems like a cleaner design than
what Unreal has.
* Godot's `AnimationTree` has the notion of [*blend filters*], which are
essentially the same as masks as implemented in this PR.
Additionally, this patch fixes a bug with weight evaluation whereby
weights weren't properly propagated down to grandchildren, because the
weight evaluation for a node only checked its parent's weight, not its
evaluated weight. I considered submitting this as a separate PR, but
given that this PR refactors that code entirely to support masks and
weights under a unified "evaluated node" concept, I simply included the
fix here.
A new example, `animation_masks`, has been added. It demonstrates how to
toggle masks on and off for specific portions of a skin.
This is part of #14395, but I'm going to defer closing that issue until
we have additive blending.
[essentially as implemented here]:
https://docs.unity3d.com/560/Documentation/Manual/class-AvatarMask.html
[*layered blend per bone*]:
https://dev.epicgames.com/documentation/en-us/unreal-engine/using-layered-animations-in-unreal-engine
[*blend filters*]:
https://docs.godotengine.org/en/stable/tutorials/animation/animation_tree.html
## Migration Guide
* The serialized format of animation graphs has changed with the
addition of animation masks. To upgrade animation graph RON files, add
`mask` and `mask_groups` fields as appropriate. (They can be safely set
to zero.)
# Objective
`resolve_outlines_system` wasn't updated when multi-window support was
added and it always uses the size of the primary window when resolving
viewport coords, regardless of the layout's camera target.
Fixes#14945
## Solution
It's awkward to get the viewport size of the target for an individual
node without walking the tree or adding extra fields to `Node`, so I
removed `resolve_outlines_system` and instead the outline values are
updated in `ui_layout_system`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Make the documentation for `SystemParamBuilder` nicer by combining the
tuple implementations into a single line of documentation.
## Solution
Use `#[doc(fake_variadic)]` for `SystemParamBuilder` tuple impls.
(This got missed originally because #14050 and #14703 were open at the
same time.)
Adds a new `Handle<Storage>` asset type that can be used as a render
asset, particularly for use with `AsBindGroup`.
Closes: #13658
# Objective
Allow users to create storage buffers in the main world without having
to access the `RenderDevice`. While this resource is technically
available, it's bad form to use in the main world and requires mixing
rendering details with main world code. Additionally, this makes storage
buffers easier to use with `AsBindGroup`, particularly in the following
scenarios:
- Sharing the same buffers between a compute stage and material shader.
We already have examples of this for storage textures (see game of life
example) and these changes allow a similar pattern to be used with
storage buffers.
- Preventing repeated gpu upload (see the previous easier to use `Vec`
`AsBindGroup` option).
- Allow initializing custom materials using `Default`. Previously, the
lack of a `Default` implement for the raw `wgpu::Buffer` type made
implementing a `AsBindGroup + Default` bound difficult in the presence
of buffers.
## Solution
Adds a new `Handle<Storage>` asset type that is prepared into a
`GpuStorageBuffer` render asset. This asset can either be initialized
with a `Vec<u8>` of properly aligned data or with a size hint. Users can
modify the underlying `wgpu::BufferDescriptor` to provide additional
usage flags.
## Migration Guide
The `AsBindGroup` `storage` attribute has been modified to reference the
new `Handle<Storage>` asset instead. Usages of Vec` should be converted
into assets instead.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
- Avoid cloning the `CosmicBuffer` every time you create a new text
measurement.
## Solution
- Inject a buffer query when calculating layout so existing buffers can
be reused.
## Testing
- I tested the `text`, `text_debug`, and `text_wrap_debug` examples.
- I did not do a performance test.
Fixes#14993 (maybe). Adds a system ordering constraint that was missed
in the refactor in #14833. The theory here is that the single threaded
forces a topology that causes the prepare system to run before
`prepare_windows` in a way that causes issues. For whatever reason, this
appears to be unlikely when multi-threading is enabled.
# Objective
* Fixes https://github.com/bevyengine/bevy/issues/14889
## Solution
Exposes `bevy_animation::{animatable, graph, transition}` to the world.
## Testing
- Did you test these changes? If so, how?
- These changes do not need testing, as they do not modify/add/remove
any functionality.
- ~~Are there any parts that need more testing?~~
- ~~How can other people (reviewers) test your changes? Is there
anything specific they need to know?~~
- ~~If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?~~
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The `reflect` module in `bevy_state` is gated behind the `bevy_reflect`
feature, but the type exports from that module in the crate prelude are
erroneously gated behind the `bevy_app` feature, causing a compile error
when the `bevy_reflect` feature is disabled, but the `bevy_app` feature
is enabled.
## Solution
Change the feature gate to `bevy_reflect`.
## Testing
- Discovered by depending on `bevy_state` with `default-features =
false, features = ["bevy_app"]`
- Tested by running `cargo check -p bevy_state --no-default-features
--features bevy_app`
# Objective
- Fixes#14974
## Solution
- Replace all* instances of `NonZero*` with `NonZero<*>`
## Testing
- CI passed locally.
---
## Notes
Within the `bevy_reflect` implementations for `std` types,
`impl_reflect_value!()` will continue to use the type aliases instead,
as it inappropriately parses the concrete type parameter as a generic
argument. If the `ZeroablePrimitive` trait was stable, or the macro
could be modified to accept a finite list of types, then we could fully
migrate.
# Objective
`bevy_animation` imports a lot of items - and it uses a very
inconsistent code style to do so.
## Solution
Changes the offending `use` statements to be more consistent across the
crate.
## Testing
- Did you test these changes? If so, how?
- No testing is needed beyond lint checks, and those finished
successfully.
- ~~Are there any parts that need more testing?~~
- ~~How can other people (reviewers) test your changes? Is there
anything specific they need to know?~~
- ~~If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?~~
# Objective
- There's one occurence of `CowArc::Borrow` that wraps '&'static str`
## Solution
- Replaces it with `CowArc::Static`. I don't think this change is
important but I can't unsee it:)
## Testing
- `cargo check` compiles fine
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14961
## Solution
- Check that the archetypes don't contain any other observed components
before unsetting their flags
## Testing
- I added a regression test: `observer_despawn_archetype_flags`
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14975
## Solution
- Replace usages of `bevy_utils::CowArc` with `atomicow::CowArc`
- Remove bevy_utils::CowArc
## Testing
- `bevy_asset` test suite continues to pass.
---
## Migration Guide
`bevy_utils::CowArc` has moved to a new crate called
[atomicow](https://crates.io/crates/atomicow).
# Objective
- Add gizmos integration for the new `Curve` things in the math lib
## Solution
- Add the following methods
- `curve_2d(curve, sample_times, color)`
- `curve_3d(curve, sample_times, color)`
- `curve_gradient_2d(curve, sample_times_with_colors)`
- `curve_gradient_3d(curve, sample_times_with_colors)`
## Testing
- I added examples of the 2D and 3D variants of the gradient curve
gizmos to the gizmos examples.
## Showcase
### 2D
```rust
let domain = Interval::EVERYWHERE;
let curve = function_curve(domain, |t| Vec2::new(t, (t / 25.0).sin() * 100.0));
let resolution = ((time.elapsed_seconds().sin() + 1.0) * 50.0) as usize;
let times_and_colors = (0..=resolution)
.map(|n| n as f32 / resolution as f32)
.map(|t| (t - 0.5) * 600.0)
.map(|t| (t, TEAL.mix(&HOT_PINK, (t + 300.0) / 600.0)));
gizmos.curve_gradient_2d(curve, times_and_colors);
```
### 3D
```rust
let domain = Interval::EVERYWHERE;
let curve = function_curve(domain, |t| {
(Vec2::from((t * 10.0).sin_cos())).extend(t - 6.0)
});
let resolution = ((time.elapsed_seconds().sin() + 1.0) * 100.0) as usize;
let times_and_colors = (0..=resolution)
.map(|n| n as f32 / resolution as f32)
.map(|t| t * 5.0)
.map(|t| (t, TEAL.mix(&HOT_PINK, t / 5.0)));
gizmos.curve_gradient_3d(curve, times_and_colors);
```
# Objective
With the current implementation of `Plane3d` gizmos, it's really hard to
get a good feeling for big planes. Usually I tend to add more axes as a
user but that doesn't scale well and is pretty wasteful. It's hard to
recognize the plane in the distance here. Especially if there would've
been other rendered objects in the scene
## Solution
- Since we got grid gizmos in the mean time, I went ahead and just
reused them here.
## Testing
I added an instance of the new `Plane3D` to the `3d_gizmos.rs` example.
If you want to look at it you need to look around a bit. I didn't
position it in the center since that was too crowded already.
---
## Showcase
## Migration Guide
The optional builder methods on
```rust
gizmos.primitive_3d(&Plane3d { }, ...);
```
changed from
- `segment_length`
- `segment_count`
- `axis_count`
to
- `cell_count`
- `spacing`
# Objective
This moves the default `LogPlugin` filter to be a public constant so
that it can be updated and referenced from outside code without changes
across releases:
```
fn main() {
App::new().add_plugins(
DefaultPlugins
.set(bevy::log::LogPlugin {
filter: format!("{},mylogs=error", bevy::log::LogPlugin::DEFAULT_FILTER),
..default()
})).run();
}
```
## Testing
Tested with `cargo run -p ci`
# Objective
Allow `SystemParamBuilder` implementations for custom system parameters
created using `#[derive(SystemParam)]`.
## Solution
Extend the derive macro to accept a `#[system_param(builder)]`
attribute. When present, emit a builder type with a field corresponding
to each field of the param.
## Example
```rust
#[derive(SystemParam)]
#[system_param(builder)]
struct CustomParam<'w, 's> {
query: Query<'w, 's, ()>,
local: Local<'s, usize>,
}
let system = (CustomParamBuilder {
local: LocalBuilder(100),
query: QueryParamBuilder::new(|builder| {
builder.with::<A>();
}),
},)
.build_state(&mut world)
.build_system(|param: CustomParam| *param.local + param.query.iter().count());
```
# Objective
- Fixes#14841
## Solution
- Compute BufferSlice size manually and use it for comparison in
`TrackedRenderPass`
## Testing
- Gizmo example does not crash with #14721 (without system ordering),
and `slice` computes correct size there
---
## Migration Guide
- `TrackedRenderPass::set_vertex_buffer` function has been modified to
update vertex buffers when the same buffer with the same offset is
provided, but its size has changed. Some existing code may rely on the
previous behavior, which did not update the vertex buffer in this
scenario.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- Fixes#14860
## Solution
- Added a line of documentation to `FromWorld`'s trait definition
mention the `Default` blanket implementation.
- Added custom documentation to the `from_world` method for the
`Default` blanket implementation. This ensures when inspecting the
`from_world` function within an IDE, the tooltip will explicitly state
the `default()` method will be used for any `Default` types.
## Testing
- CI passes.
# Objective
Since https://github.com/bevyengine/bevy/pull/14731 is merged, it
unblocked a few utility methods for 2D arcs. In 2D the pendant to
`long_arc_3d_between` and `short_arc_3d_between` are missing. Since
`arc_2d` can be a bit hard to use, this PR is trying to plug some holes
in the `arcs` API.
## Solution
Implement
- `long_arc_2d_between(center, from, tp, color)`
- `short_arc_2d_between(center, from, tp, color)`
## Testing
- There are new doc tests
- The `2d_gizmos` example has been extended a bit to include a few more
arcs which can easily be checked with respect to the grid
---
## Showcase
Code related to the screenshot (from outer = first line to inner = last
line)
```rust
my_gizmos.arc_2d(Isometry2d::IDENTITY, FRAC_PI_2, 80.0, ORANGE_RED);
my_gizmos.short_arc_2d_between(Vec2::ZERO, Vec2::X * 40.0, Vec2::Y * 40.0, ORANGE_RED);
my_gizmos.long_arc_2d_between(Vec2::ZERO, Vec2::X * 20.0, Vec2::Y * 20.0, ORANGE_RED);
```
# Objective
When building a system from `SystemParamBuilder`s and defining the
system as a closure, the compiler should be able to infer the parameter
types from the builder types.
## Solution
Create methods for each arity that take an argument that implements both
`SystemParamFunction` as well as `FnMut(SystemParamItem<P>,...)`. The
explicit `FnMut` constraint will allow the compiler to infer the
necessary higher-ranked lifetimes along with the parameter types.
I wanted to show that this was possible, but I can't tell whether it's
worth the complexity. It requires a separate method for each arity,
which pollutes the docs a bit:
## Example
```rust
let system = (LocalBuilder(0u64), ParamBuilder::local::<u64>())
.build_state(&mut world)
.build_system(|a, b| *a + *b + 1);
```
# Objective
- Solves the last bullet in and closes#14319
- Make better use of the `Isometry` types
- Prevent issues like #14655
- Probably simplify and clean up a lot of code through the use of Gizmos
as well (i.e. the 3D gizmos for cylinders circles & lines don't connect
well, probably due to wrong rotations)
## Solution
- go through the `bevy_gizmos` crate and give all methods a slight
workover
## Testing
- For all the changed examples I run `git switch main && cargo rr
--example <X> && git switch <BRANCH> && cargo rr --example <X>` and
compare the visual results
- Check if all doc tests are still compiling
- Check the docs in general and update them !!!
---
## Migration Guide
The gizmos methods function signature changes as follows:
- 2D
- if it took `position` & `rotation_angle` before ->
`Isometry2d::new(position, Rot2::radians(rotation_angle))`
- if it just took `position` before ->
`Isometry2d::from_translation(position)`
- 3D
- if it took `position` & `rotation` before ->
`Isometry3d::new(position, rotation)`
- if it just took `position` before ->
`Isometry3d::from_translation(position)`
# Objective
sending events tends to be low-frequency so ergonomics can be
prioritized over efficiency.
add `Commands::send_event` to send any type of event without needing a
writer in hand.
i don't know how we feel about these kind of ergonomic things, i add
this to all my projects and find it useful. adding `mut
this_particular_event_writer: EventWriter<ThisParticularEvent>` every
time i want to send something is unnecessarily cumbersome.
it also simplifies the "send and receive in the same system" pattern
significantly.
basic example before:
```rs
fn my_func(
q: Query<(Entity, &State)>,
mut damage_event_writer: EventWriter<DamageEvent>,
mut heal_event_writer: EventWriter<HealEvent>,
) {
for (entity, state) in q.iter() {
if let Some(damage) = state.get_damage() {
damage_event_writer.send(DamageEvent { entity, damage });
}
if let Some(heal) = state.get_heal() {
heal_event_writer.send(HealEvent { entity, heal });
}
}
}
```
basic example after:
```rs
import bevy::ecs::event::SendEventEx;
fn my_func(
mut commands: Commands,
q: Query<(Entity, &State)>,
) {
for (entity, state) in q.iter() {
if let Some(damage) = state.get_damage() {
commands.send_event(DamageEvent { entity, damage });
}
if let Some(heal) = state.get_heal() {
commands.send_event(HealEvent { entity, heal });
}
}
}
```
send/receive in the same system before:
```rs
fn send_and_receive_param_set(
mut param_set: ParamSet<(EventReader<DebugEvent>, EventWriter<DebugEvent>)>,
) {
// We must collect the events to resend, because we can't access the writer while we're iterating over the reader.
let mut events_to_resend = Vec::new();
// This is p0, as the first parameter in the `ParamSet` is the reader.
for event in param_set.p0().read() {
if event.resend_from_param_set {
events_to_resend.push(event.clone());
}
}
// This is p1, as the second parameter in the `ParamSet` is the writer.
for mut event in events_to_resend {
event.times_sent += 1;
param_set.p1().send(event);
}
}
```
after:
```rs
use bevy::ecs::event::SendEventEx;
fn send_via_commands_and_receive(
mut reader: EventReader<DebugEvent>,
mut commands: Commands,
) {
for event in reader.read() {
if event.resend_via_commands {
commands.send_event(DebugEvent {
times_sent: event.times_sent + 1,
..event.clone()
});
}
}
}
```
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
## Introduction
This is the first step in my [Next Generation Scene / UI
Proposal](https://github.com/bevyengine/bevy/discussions/14437).
Fixes https://github.com/bevyengine/bevy/issues/7272#14800.
Bevy's current Bundles as the "unit of construction" hamstring the UI
user experience and have been a pain point in the Bevy ecosystem
generally when composing scenes:
* They are an additional _object defining_ concept, which must be
learned separately from components. Notably, Bundles _are not present at
runtime_, which is confusing and limiting.
* They can completely erase the _defining component_ during Bundle init.
For example, `ButtonBundle { style: Style::default(), ..default() }`
_makes no mention_ of the `Button` component symbol, which is what makes
the Entity a "button"!
* They are not capable of representing "dependency inheritance" without
completely non-viable / ergonomically crushing nested bundles. This
limitation is especially painful in UI scenarios, but it applies to
everything across the board.
* They introduce a bunch of additional nesting when defining scenes,
making them ugly to look at
* They introduce component name "stutter": `SomeBundle { component_name:
ComponentName::new() }`
* They require copious sprinklings of `..default()` when spawning them
in Rust code, due to the additional layer of nesting
**Required Components** solve this by allowing you to define which
components a given component needs, and how to construct those
components when they aren't explicitly provided.
This is what a `ButtonBundle` looks like with Bundles (the current
approach):
```rust
#[derive(Component, Default)]
struct Button;
#[derive(Bundle, Default)]
struct ButtonBundle {
pub button: Button,
pub node: Node,
pub style: Style,
pub interaction: Interaction,
pub focus_policy: FocusPolicy,
pub border_color: BorderColor,
pub border_radius: BorderRadius,
pub image: UiImage,
pub transform: Transform,
pub global_transform: GlobalTransform,
pub visibility: Visibility,
pub inherited_visibility: InheritedVisibility,
pub view_visibility: ViewVisibility,
pub z_index: ZIndex,
}
commands.spawn(ButtonBundle {
style: Style {
width: Val::Px(100.0),
height: Val::Px(50.0),
..default()
},
focus_policy: FocusPolicy::Block,
..default()
})
```
And this is what it looks like with Required Components:
```rust
#[derive(Component)]
#[require(Node, UiImage)]
struct Button;
commands.spawn((
Button,
Style {
width: Val::Px(100.0),
height: Val::Px(50.0),
..default()
},
FocusPolicy::Block,
));
```
With Required Components, we mention only the most relevant components.
Every component required by `Node` (ex: `Style`, `FocusPolicy`, etc) is
automatically brought in!
### Efficiency
1. At insertion/spawn time, Required Components (including recursive
required components) are initialized and inserted _as if they were
manually inserted alongside the given components_. This means that this
is maximally efficient: there are no archetype or table moves.
2. Required components are only initialized and inserted if they were
not manually provided by the developer. For the code example in the
previous section, because `Style` and `FocusPolicy` are inserted
manually, they _will not_ be initialized and inserted as part of the
required components system. Efficient!
3. The "missing required components _and_ constructors needed for an
insertion" are cached in the "archetype graph edge", meaning they aren't
computed per-insertion. When a component is inserted, the "missing
required components" list is iterated (and that graph edge (AddBundle)
is actually already looked up for us during insertion, because we need
that for "normal" insert logic too).
### IDE Integration
The `#[require(SomeComponent)]` macro has been written in such a way
that Rust Analyzer can provide type-inspection-on-hover and `F12` /
go-to-definition for required components.
### Custom Constructors
The `require` syntax expects a `Default` constructor by default, but it
can be overridden with a custom constructor:
```rust
#[derive(Component)]
#[require(
Node,
Style(button_style),
UiImage
)]
struct Button;
fn button_style() -> Style {
Style {
width: Val::Px(100.0),
..default()
}
}
```
### Multiple Inheritance
You may have noticed by now that this behaves a bit like "multiple
inheritance". One of the problems that this presents is that it is
possible to have duplicate requires for a given type at different levels
of the inheritance tree:
```rust
#[derive(Component)
struct X(usize);
#[derive(Component)]
#[require(X(x1))
struct Y;
fn x1() -> X {
X(1)
}
#[derive(Component)]
#[require(
Y,
X(x2),
)]
struct Z;
fn x2() -> X {
X(2)
}
// What version of X is inserted for Z?
commands.spawn(Z);
```
This is allowed (and encouraged), although this doesn't appear to occur
much in practice. First: only one version of `X` is initialized and
inserted for `Z`. In the case above, I think we can all probably agree
that it makes the most sense to use the `x2` constructor for `X`,
because `Y`'s `x1` constructor exists "beneath" `Z` in the inheritance
hierarchy; `Z`'s constructor is "more specific".
The algorithm is simple and predictable:
1. Use all of the constructors (including default constructors) directly
defined in the spawned component's require list
2. In the order the requires are defined in `#[require()]`, recursively
visit the require list of each of the components in the list (this is a
depth Depth First Search). When a constructor is found, it will only be
used if one has not already been found.
From a user perspective, just think about this as the following:
1. Specifying a required component constructor for `Foo` directly on a
spawned component `Bar` will result in that constructor being used (and
overriding existing constructors lower in the inheritance tree). This is
the classic "inheritance override" behavior people expect.
2. For cases where "multiple inheritance" results in constructor
clashes, Components should be listed in "importance order". List a
component earlier in the requirement list to initialize its inheritance
tree earlier.
Required Components _does_ generally result in a model where component
values are decoupled from each other at construction time. Notably, some
existing Bundle patterns use bundle constructors to initialize multiple
components with shared state. I think (in general) moving away from this
is necessary:
1. It allows Required Components (and the Scene system more generally)
to operate according to simple rules
2. The "do arbitrary init value sharing in Bundle constructors" approach
_already_ causes data consistency problems, and those problems would be
exacerbated in the context of a Scene/UI system. For cases where shared
state is truly necessary, I think we are better served by observers /
hooks.
3. If a situation _truly_ needs shared state constructors (which should
be rare / generally discouraged), Bundles are still there if they are
needed.
## Next Steps
* **Require Construct-ed Components**: I have already implemented this
(as defined in the [Next Generation Scene / UI
Proposal](https://github.com/bevyengine/bevy/discussions/14437). However
I've removed `Construct` support from this PR, as that has not landed
yet. Adding this back in requires relatively minimal changes to the
current impl, and can be done as part of a future Construct pr.
* **Port Built-in Bundles to Required Components**: This isn't something
we should do right away. It will require rethinking our public
interfaces, which IMO should be done holistically after the rest of Next
Generation Scene / UI lands. I think we should merge this PR first and
let people experiment _inside their own code with their own Components_
while we wait for the rest of the new scene system to land.
* **_Consider_ Automatic Required Component Removal**: We should
evaluate _if_ automatic Required Component removal should be done. Ex:
if all components that explicitly require a component are removed,
automatically remove that component. This issue has been explicitly
deferred in this PR, as I consider the insertion behavior to be
desirable on its own (and viable on its own). I am also doubtful that we
can find a design that has behavior we actually want. Aka: can we
_really_ distinguish between a component that is "only there because it
was automatically inserted" and "a component that was necessary / should
be kept". See my [discussion response
here](https://github.com/bevyengine/bevy/discussions/14437#discussioncomment-10268668)
for more details.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
The Android example on Adreno 642L currently crashes on startup.
Previous PRs #14176 and #13323 have adressed this specific crash
occurring on some Adreno GPUs, that fix works as it should but isn't
applied when to the GPU name contains a suffix like in the case of
`642L`.
## Solution
- Amending the logic to filter out any parts of the GPU name not
containing digits thus enabling the fix on `642L`.
## Testing
- Ran the Android example on a Nothing Phone 1. Before this change it
crashed, after it works as intended.
---------
Co-authored-by: Sam Pettersson <sam.pettersson@geoguessr.com>
# Objective
- `Curve<T>` was meant to be object safe, but one of the latest commits
made it not object safe.
- When trying to use `Curve<T>` as `&dyn Curve<T>` this compile error is
raised:
```
error[E0038]: the trait `curve::Curve` cannot be made into an object
--> crates/bevy_math/src/curve/mod.rs:1025:20
note: for a trait to be "object safe" it needs to allow building a vtable to allow the call to be resolvable dynamically; for more information visit <https://doc.rust-lang.org/reference/items/traits.html#object-safety>
--> crates/bevy_math/src/curve/mod.rs:60:8
|
23 | pub trait Curve<T> {
| ----- this trait cannot be made into an object...
...
60 | fn sample_iter(&self, iter: impl IntoIterator<Item = f32>) -> impl Iterator<Item = Option<T>> {
| ^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ...because method `sample_iter` references an `impl Trait` type in its return type
| |
| ...because method `sample_iter` has generic type parameters
...
```
## Solution
- Making `Curve<T>` object safe again by adding `Self: Sized` to newly
added methods.
## Testing
- Added new test that ensures the `Curve<T>` trait can be made into an
objet.
# Objective
- Fixes#14348
- Fixes#14528
- Less complex (but also likely less performant) alternative to #14611
## Solution
- Add a `is_dense` field flag to `QueryIter` indicating whether it is
dense or not, that is whether it can perform dense iteration or not;
- Check this flag any time iteration over a query is performed.
---
It would be nice if someone could try benching this change to see if it
actually matters.
~Note that this not 100% ready for mergin, since there are a bunch of
safety comments on the use of the various `IS_DENSE` for checks that
still need to be updated.~ This is ready modulo benchmarks
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
when handles for loading assets are dropped, we currently wait until
load is completed before dropping the handle. drop asset-load tasks
immediately
## Solution
- track tasks for loading assets and drop them immediately when all
handles are dropped.
~~- use `join_all` in `gltf_loader.rs` to allow it to yield and be
dropped.~~
doesn't cover all the load apis - for those it doesn't cover the task
will still be detached and will still complete before the result is
discarded.
separated out from #13170
# Objective
Allow dynamic systems to take lists of system parameters whose length is
not known at compile time.
This can be used for building a system that runs a script defined at
runtime, where the script needs a variable number of query parameters.
It can also be used for building a system that collects a list of
plugins at runtime, and provides a parameter to each one.
This is most useful today with `Vec<Query<FilteredEntityMut>>`. It will
be even more useful with `Vec<DynSystemParam>` if #14817 is merged,
since the parameters in the list can then be of different types.
## Solution
Implement `SystemParam` and `SystemParamBuilder` for `Vec` and
`ParamSet<Vec>`.
## Example
```rust
let system = (vec![
QueryParamBuilder::new_box(|builder| {
builder.with::<B>().without::<C>();
}),
QueryParamBuilder::new_box(|builder| {
builder.with::<C>().without::<B>();
}),
],)
.build_state(&mut world)
.build_system(|params: Vec<Query<&mut A>>| {
let mut count: usize = 0;
params
.into_iter()
.for_each(|mut query| count += query.iter_mut().count());
count
});
```
# Objective
- Fixes#14902
- > #14686 Introduced a name clash when using use bevy::prelude::*;
## Solution
- renamed `bevy::picking::events::Drop`
`bevy::picking::events::DragDrop`
## Testing
- Not being used in tests or examples, so I just compiled.
---
</details>
## Migration Guide
- Rename `Drop` to `DragDrop`
- `bevy::picking::events::Drop` is now `bevy::picking::events::DragDrop`
# Objective
This is a value that is and will be used as a domain of curves pretty
often. By adding it as a dedicated constant we can get rid of some
`unwraps` and function calls.
## Solution
added `Interval::UNIT`
## Testing
I replaced all occurrences of `interval(0.0, 1.0).unwrap()` with the new
`Interval::UNIT` constant in tests and doc tests.
# Objective
- I needed to run a system whenever a specific condition became true
after being previously false.
- Other users might also need to run a system when a condition changes,
regardless of if it became true or false.
## Solution
- This adds two systems to common_conditions:
- `condition_changed` that changes whenever the inner condition changes
- `condition_became_true` that returns true whenever the inner condition
becomes true after previously being false
## Testing
- I added a doctest for each function
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
- Allow not only inserting `Data` into `EmbeddedAssetRegistry` and `Dir`
in turn but now also removing it again.
- This way when used to embed asset data from *somewhere* but not load
it using the conventional means via `AssetServer` (which I observed
takes ownership of the `Data`) the `Data` does not need to stay in
memory of the `EmbeddedAssetRegistry` throughout the lifetime of the
application.
## Solution
- added the `remove_asset` functions in `EmbeddedAssetRegistry` and
`Dir`
## Testing
- added a module unittest
- does this require changes if build with feature `embedded_watcher`?
# Objective
Fixes#14883
## Solution
Pretty simple update to `EntityCommands` methods to consume `self` and
return it rather than taking `&mut self`. The things probably worth
noting:
* I added `#[allow(clippy::should_implement_trait)]` to the `add` method
because it causes a linting conflict with `std::ops::Add`.
* `despawn` and `log_components` now return `Self`. I'm not sure if
that's exactly the desired behavior so I'm happy to adjust if that seems
wrong.
## Testing
Tested with `cargo run -p ci`. I think that should be sufficient to call
things good.
## Migration Guide
The most likely migration needed is changing code from this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity.insert(DepthPrepass);
}
if normal_prepass {
entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
to this:
```
let mut entity = commands.get_or_spawn(entity);
if depth_prepass {
entity = entity.insert(DepthPrepass);
}
if normal_prepass {
entity = entity.insert(NormalPrepass);
}
if motion_vector_prepass {
entity = entity.insert(MotionVectorPrepass);
}
if deferred_prepass {
entity.insert(DeferredPrepass);
}
```
as can be seen in several of the example code updates here. There will
probably also be instances where mutable `EntityCommands` vars no longer
need to be mutable.
# Objective
Based on the discussion in #14864, I wanted to experiment with the core
`GenericTypeCell` type, whose `get_or_insert` method accounted for 2% of
the final binary size of the `3d_scene` example. The reason for this
large percentage is likely because the type is fundamental to the rest
of Bevy while having 3 generic parameters (the type stored `T`, the type
to retrieve `G`, and the function used to insert a new value `F`).
- Acts on #14864
## Solution
- Split `get_or_insert` into smaller functions with minimised
parameterisation. These new functions are private as to preserve the
public facing API, but could be exposed if desired.
## Testing
- Ran CI locally.
- Used `cargo bloat --release --example 3d_scene -n 100000
--message-format json > out.json` and @cart's [bloat
analyzer](https://gist.github.com/cart/722756ba3da0e983d207633e0a48a8ab)
to measure a 428KiB reduction in binary size when compiling on Windows
10.
- ~I have _not_ benchmarked to determine if this improves/hurts
performance.~ See
[below](https://github.com/bevyengine/bevy/pull/14865#issuecomment-2306083606).
## Notes
In my opinion this seems like a good test-case for the concept of
debloating generics within the Bevy codebase. I believe the performance
impact here is negligible in either direction (at runtime and compile
time), but the binary reduction is measurable and quite significant for
a relatively minor change in code.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Citing @mweatherley
> As mentioned before, a multi-sampling function in the API which takes
an iterator is probably something we want (e.g. `sample_iter(iter: impl
IntoIterator<Item = f32>) -> impl IntoIterator<Item = T> { //... }`, but
there are some design choices to be made on the details (e.g. does this
filter out points that aren't in the domain? does it do sorting? etc.)
## Solution
I think the most flexible solution for end users is to expose all the
`sample_...` functions with an `iter` equivalent, so we'll have
- `sample_iter`
- `sample_iter_unchecked`
- `sample_iter_clamped`
Answering some questions from the original idea:
> does this filter out points that aren't in the domain?
With the methods the user has the choice to just sample or if they want
to filter out invalid types us `sample_iter` and then apply `filter_map`
to the iterator returned themselves.
> does it do sorting?
I think it's the same thing. If the user wants it, they need to do it
themselves by either collecting and sorting a `Vec` or using
`itertools`. I think there is a legit use case for "please sample me
this collection of points that are unordered" and we would destroy it if
we take away to much agency from users by sorting for them
## Testing
- Added a test which covers all three methods
# Objective
Add `bevy_picking` sprite backend as part of the `bevy_mod_picking`
upstreamening (#12365).
## Solution
More or less a copy/paste from `bevy_mod_picking`, with the changes
[here](https://github.com/aevyrie/bevy_mod_picking/pull/354). I'm
putting that link here since those changes haven't yet made it through
review, so should probably be reviewed on their own.
## Testing
I couldn't find any sprite-backend-specific tests in `bevy_mod_picking`
and unfortunately I'm not familiar enough with Bevy's testing patterns
to write tests for code that relies on windowing and input. I'm willing
to break the pointer hit system into testable blocks and add some more
modular tests if that's deemed important enough to block, otherwise I
can open an issue for adding tests as follow-up.
## Follow-up work
- More docs/tests
- Ignore pick events on transparent sprite pixels with potential opt-out
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
