# Objective
The definition of several `QueryState` methods use unnecessary explicit
lifetimes, which adds to visual noise.
## Solution
Elide the lifetimes.
# Objective
- Users are often confused when their command effects are not visible in
the next system. This PR auto inserts sync points if there are deferred
buffers on a system and there are dependents on that system (systems
with after relationships).
- Manual sync points can lead to users adding more than needed and it's
hard for the user to have a global understanding of their system graph
to know which sync points can be merged. However we can easily calculate
which sync points can be merged automatically.
## Solution
1. Add new edge types to allow opting out of new behavior
2. Insert an sync point for each edge whose initial node has deferred
system params.
3. Reuse nodes if they're at the number of sync points away.
* add opt outs for specific edges with `after_ignore_deferred`,
`before_ignore_deferred` and `chain_ignore_deferred`. The
`auto_insert_apply_deferred` boolean on `ScheduleBuildSettings` can be
set to false to opt out for the whole schedule.
## Perf
This has a small negative effect on schedule build times.
```text
group auto-sync main-for-auto-sync
----- ----------- ------------------
build_schedule/1000_schedule 1.06 2.8±0.15s ? ?/sec 1.00 2.7±0.06s ? ?/sec
build_schedule/1000_schedule_noconstraints 1.01 26.2±0.88ms ? ?/sec 1.00 25.8±0.36ms ? ?/sec
build_schedule/100_schedule 1.02 13.1±0.33ms ? ?/sec 1.00 12.9±0.28ms ? ?/sec
build_schedule/100_schedule_noconstraints 1.08 505.3±29.30µs ? ?/sec 1.00 469.4±12.48µs ? ?/sec
build_schedule/500_schedule 1.00 485.5±6.29ms ? ?/sec 1.00 485.5±9.80ms ? ?/sec
build_schedule/500_schedule_noconstraints 1.00 6.8±0.10ms ? ?/sec 1.02 6.9±0.16ms ? ?/sec
```
---
## Changelog
- Auto insert sync points and added `after_ignore_deferred`,
`before_ignore_deferred`, `chain_no_deferred` and
`auto_insert_apply_deferred` APIs to opt out of this behavior
## Migration Guide
- `apply_deferred` points are added automatically when there is ordering
relationship with a system that has deferred parameters like `Commands`.
If you want to opt out of this you can switch from `after`, `before`,
and `chain` to the corresponding `ignore_deferred` API,
`after_ignore_deferred`, `before_ignore_deferred` or
`chain_ignore_deferred` for your system/set ordering.
- You can also set `ScheduleBuildSettings::auto_insert_sync_points` to
`false` if you want to do it for the whole schedule. Note that in this
mode you can still add `apply_deferred` points manually.
- For most manual insertions of `apply_deferred` you should remove them
as they cannot be merged with the automatically inserted points and
might reduce parallelizability of the system graph.
## TODO
- [x] remove any apply_deferred used in the engine
- [x] ~~decide if we should deprecate manually using apply_deferred.~~
We'll still allow inserting manual sync points for now for whatever edge
cases users might have.
- [x] Update migration guide
- [x] rerun schedule build benchmarks
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
- Make the implementation order consistent between all sources to fit
the order in the trait.
## Solution
- Change the implementation order.
# Objective
Since #10776 split `WorldQuery` to `WorldQueryData` and
`WorldQueryFilter`, it should be clear that the query is actually
composed of two parts. It is not factually correct to call "query" only
the data part. Therefore I suggest to rename the `Q` parameter to `D` in
`Query` and related items.
As far as I know, there shouldn't be breaking changes from renaming
generic type parameters.
## Solution
I used a combination of rust-analyzer go to reference and `Ctrl-F`ing
various patterns to catch as many cases as possible. Hopefully I got
them all. Feel free to check if you're concerned of me having missed
some.
## Notes
This and #10779 have many lines in common, so merging one will cause a
lot of merge conflicts to the other.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- The example in the docs is unsound.
Demo:
```rust
#[derive(Resource)]
struct MyRes(u32);
fn main() {
let mut w = World::new();
w.insert_resource(MyRes(0));
let (mut res, comp) = split_world_access(&mut w);
let mut r1 = res.get_resource_mut::<MyRes>().unwrap();
let mut r2 = res.get_resource_mut::<MyRes>().unwrap();
*r1 = MyRes(1);
*r2 = MyRes(2);
}
```
The API in the example allows aliasing mutable references to the same
resource. Miri also complains when running this.
## Solution
- Change the example API to make the returned `Mut` borrow from the
`OnlyResourceAccessWorld` instead of borrowing from the world via `'w`.
This prevents obtaining more than one `Mut` at the same time from it.
# Objective
The `Despawn` command breaks the hierarchy whenever you use it if the
despawned entity has a parent or any children. This is a serious footgun
because the `Despawn` command has the shortest name, the behavior is
unexpected and not likely to be what you want, and the crash that it
causes can be very difficult to track down.
## Solution
Until this can be fixed by relations, add a note mentioning the footgun
in the documentation.
## Solution
`Commands.remove` and `.retain` (because I copied `remove`s doc)
referenced `EntityWorldMut.remove` and `retain` for more detail but the
`Commands` docs are much more detailed (which makes sense because it is
the most common api), so I have instead inverted this so that
`EntityWorldMut` docs link to `Commands`.
I also made `EntityWorldMut.despawn` reference `World.despawn` for more
details, like `Commands.despawn` does.
# Objective
Test more complex function signatures for exclusive systems, and test
that `StaticSystemParam` is indeed a `SystemParam`.
I mean, it currently works, but might as well add a test for it.
# Objective
Adds `EntityCommands.retain` and `EntityWorldMut.retain` to remove all
components except the given bundle from the entity.
Fixes#10865.
## Solution
I added a private unsafe function in `EntityWorldMut` called
`remove_bundle_info` which performs the shared behaviour of `remove` and
`retain`, namely taking a `BundleInfo` of components to remove, and
removing them from the given entity. Then `retain` simply gets all the
components on the entity and filters them by whether they are in the
bundle it was passed, before passing this `BundleInfo` into
`remove_bundle_info`.
`EntityCommands.retain` just creates a new type `Retain` which runs
`EntityWorldMut.retain` when run.
---
## Changelog
Added `EntityCommands.retain` and `EntityWorldMut.retain`, which remove
all components except the given bundle from the entity, they can also be
used to remove all components by passing `()` as the bundle.
# Objective
- Fixes#10806
## Solution
Replaced `new` and `index` methods for both `TableRow` and `TableId`
with `from_*` and `as_*` methods. These remove the need to perform
casting at call sites, reducing the total number of casts in the Bevy
codebase. Within these methods, an appropriate `debug_assertion` ensures
the cast will behave in an expected manner (no wrapping, etc.). I am
using a `debug_assertion` instead of an `assert` to reduce any possible
runtime overhead, however minimal. This choice is something I am open to
changing (or leaving up to another PR) if anyone has any strong
arguments for it.
---
## Changelog
- `ComponentSparseSet::sparse` stores a `TableRow` instead of a `u32`
(private change)
- Replaced `TableRow::new` and `TableRow::index` methods with
`TableRow::from_*` and `TableRow::as_*`, with `debug_assertions`
protecting any internal casting.
- Replaced `TableId::new` and `TableId::index` methods with
`TableId::from_*` and `TableId::as_*`, with `debug_assertions`
protecting any internal casting.
- All `TableId` methods are now `const`
## Migration Guide
- `TableRow::new` -> `TableRow::from_usize`
- `TableRow::index` -> `TableRow::as_usize`
- `TableId::new` -> `TableId::from_usize`
- `TableId::index` -> `TableId::as_usize`
---
## Notes
I have chosen to remove the `index` and `new` methods for the following
chain of reasoning:
- Across the codebase, `new` was called with a mixture of `u32` and
`usize` values. Likewise for `index`.
- Choosing `new` to either be `usize` or `u32` would break half of these
call-sites, requiring `as` casting at the site.
- Adding a second method `new_u32` or `new_usize` avoids the above, bu
looks visually inconsistent.
- Therefore, they should be replaced with `from_*` and `as_*` methods
instead.
Worth noting is that by updating `ComponentSparseSet`, there are now
zero instances of interacting with the inner value of `TableRow` as a
`u32`, it is exclusively used as a `usize` value (due to interactions
with methods like `len` and slice indexing). I have left the `as_u32`
and `from_u32` methods as the "proper" constructors/getters.
# Objective
Resolves Issue #10772.
## Solution
Added the deprecated warning for QueryState::for_each_unchecked, as
noted in the comments of PR #6773.
Followed the wording in the deprecation messages for `for_each` and
`for_each_mut`
# Objective
After #6547, `Query::for_each` has been capable of automatic
vectorization on certain queries, which is seeing a notable (>50% CPU
time improvements) for iteration. However, `Query::for_each` isn't
idiomatic Rust, and lacks the flexibility of iterator combinators.
Ideally, `Query::iter` and friends should be able to achieve the same
results. However, this does seem to blocked upstream
(rust-lang/rust#104914) by Rust's loop optimizations.
## Solution
This is an intermediate solution and refactor. This moves the
`Query::for_each` implementation onto the `Iterator::fold`
implementation for `QueryIter` instead. This should result in the same
automatic vectorization optimization on all `Iterator` functions that
internally use fold, including `Iterator::for_each`, `Iterator::count`,
etc.
With this, it should close the gap between the two completely.
Internally, this PR changes `Query::for_each` to use
`query.iter().for_each(..)` instead of the duplicated implementation.
Separately, the duplicate implementations of internal iteration (i.e.
`Query::par_for_each`) now use portions of the current `Query::for_each`
implementation factored out into their own functions.
This also massively cleans up our internal fragmentation of internal
iteration options, deduplicating the iteration code used in `for_each`
and `par_iter().for_each()`.
---
## Changelog
Changed: `Query::for_each`, `Query::for_each_mut`, `Query::for_each`,
and `Query::for_each_mut` have been moved to `QueryIter`'s
`Iterator::for_each` implementation, and still retains their performance
improvements over normal iteration. These APIs are deprecated in 0.13
and will be removed in 0.14.
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Shorten paths by removing unnecessary prefixes
## Solution
- Remove the prefixes from many paths which do not need them. Finding
the paths was done automatically using built-in refactoring tools in
Jetbrains RustRover.
# Objective
Keep essentially the same structure of `EntityHasher` from #9903, but
rephrase the multiplication slightly to save an instruction.
cc @superdump
Discord thread:
https://discord.com/channels/691052431525675048/1172033156845674507/1174969772522356756
## Solution
Today, the hash is
```rust
self.hash = i | (i.wrapping_mul(FRAC_U64MAX_PI) << 32);
```
with `i` being `(generation << 32) | index`.
Expanding things out, we get
```rust
i | ( (i * CONST) << 32 )
= (generation << 32) | index | ((((generation << 32) | index) * CONST) << 32)
= (generation << 32) | index | ((index * CONST) << 32) // because the generation overflowed
= (index * CONST | generation) << 32 | index
```
What if we do the same thing, but with `+` instead of `|`? That's almost
the same thing, except that it has carries, which are actually often
better in a hash function anyway, since it doesn't saturate. (`|` can be
dangerous, since once something becomes `-1` it'll stay that, and
there's no mixing available.)
```rust
(index * CONST + generation) << 32 + index
= (CONST << 32 + 1) * index + generation << 32
= (CONST << 32 + 1) * index + (WHATEVER << 32 + generation) << 32 // because the extra overflows and thus can be anything
= (CONST << 32 + 1) * index + ((CONST * generation) << 32 + generation) << 32 // pick "whatever" to be something convenient
= (CONST << 32 + 1) * index + ((CONST << 32 + 1) * generation) << 32
= (CONST << 32 + 1) * index +((CONST << 32 + 1) * (generation << 32)
= (CONST << 32 + 1) * (index + generation << 32)
= (CONST << 32 + 1) * (generation << 32 | index)
= (CONST << 32 + 1) * i
```
So we can do essentially the same thing using a single multiplication
instead of doing multiply-shift-or.
LLVM was already smart enough to merge the shifting into a
multiplication, but this saves the extra `or`:
<https://rust.godbolt.org/z/MEvbz4eo4>
It's a very small change, and often will disappear in load latency
anyway, but it's a couple percent faster in lookups:
(There was more of an improvement here before #10558, but with `to_bits`
being a single `qword` load now, keeping things mostly as it is turned
out to be better than the bigger changes I'd tried in #10605.)
---
## Changelog
(Probably skip it)
## Migration Guide
(none needed)
# Objective
Related to #10612.
Enable the
[`clippy::manual_let_else`](https://rust-lang.github.io/rust-clippy/master/#manual_let_else)
lint as a warning. The `let else` form seems more idiomatic to me than a
`match`/`if else` that either match a pattern or diverge, and from the
clippy doc, the lint doesn't seem to have any possible false positive.
## Solution
Add the lint as warning in `Cargo.toml`, refactor places where the lint
triggers.
# Objective
- Fixes#7680
- This is an updated for https://github.com/bevyengine/bevy/pull/8899
which had the same objective but fell a long way behind the latest
changes
## Solution
The traits `WorldQueryData : WorldQuery` and `WorldQueryFilter :
WorldQuery` have been added and some of the types and functions from
`WorldQuery` has been moved into them.
`ReadOnlyWorldQuery` has been replaced with `ReadOnlyWorldQueryData`.
`WorldQueryFilter` is safe (as long as `WorldQuery` is implemented
safely).
`WorldQueryData` is unsafe - safely implementing it requires that
`Self::ReadOnly` is a readonly version of `Self` (this used to be a
safety requirement of `WorldQuery`)
The type parameters `Q` and `F` of `Query` must now implement
`WorldQueryData` and `WorldQueryFilter` respectively.
This makes it impossible to accidentally use a filter in the data
position or vice versa which was something that could lead to bugs.
~~Compile failure tests have been added to check this.~~
It was previously sometimes useful to use `Option<With<T>>` in the data
position. Use `Has<T>` instead in these cases.
The `WorldQuery` derive macro has been split into separate derive macros
for `WorldQueryData` and `WorldQueryFilter`.
Previously it was possible to derive both `WorldQuery` for a struct that
had a mixture of data and filter items. This would not work correctly in
some cases but could be a useful pattern in others. *This is no longer
possible.*
---
## Notes
- The changes outside of `bevy_ecs` are all changing type parameters to
the new types, updating the macro use, or replacing `Option<With<T>>`
with `Has<T>`.
- All `WorldQueryData` types always returned `true` for `IS_ARCHETYPAL`
so I moved it to `WorldQueryFilter` and
replaced all calls to it with `true`. That should be the only logic
change outside of the macro generation code.
- `Changed<T>` and `Added<T>` were being generated by a macro that I
have expanded. Happy to revert that if desired.
- The two derive macros share some functions for implementing
`WorldQuery` but the tidiest way I could find to implement them was to
give them a ton of arguments and ask clippy to ignore that.
## Changelog
### Changed
- Split `WorldQuery` into `WorldQueryData` and `WorldQueryFilter` which
now have separate derive macros. It is not possible to derive both for
the same type.
- `Query` now requires that the first type argument implements
`WorldQueryData` and the second implements `WorldQueryFilter`
## Migration Guide
- Update derives
```rust
// old
#[derive(WorldQuery)]
#[world_query(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA
}
#[derive(WorldQuery)]
struct QueryFilter {
_c: With<ComponentC>
}
// new
#[derive(WorldQueryData)]
#[world_query_data(mutable, derive(Debug))]
struct CustomQuery {
entity: Entity,
a: &'static mut ComponentA,
}
#[derive(WorldQueryFilter)]
struct QueryFilter {
_c: With<ComponentC>
}
```
- Replace `Option<With<T>>` with `Has<T>`
```rust
/// old
fn my_system(query: Query<(Entity, Option<With<ComponentA>>)>)
{
for (entity, has_a_option) in query.iter(){
let has_a:bool = has_a_option.is_some();
//todo!()
}
}
/// new
fn my_system(query: Query<(Entity, Has<ComponentA>)>)
{
for (entity, has_a) in query.iter(){
//todo!()
}
}
```
- Fix queries which had filters in the data position or vice versa.
```rust
// old
fn my_system(query: Query<(Entity, With<ComponentA>)>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Entity, With<ComponentA>>)
{
for entity in query.iter(){
//todo!()
}
}
// old
fn my_system(query: Query<AnyOf<(&ComponentA, With<ComponentB>)>>)
{
for (entity, _) in query.iter(){
//todo!()
}
}
// new
fn my_system(query: Query<Option<&ComponentA>, Or<(With<ComponentA>, With<ComponentB>)>>)
{
for entity in query.iter(){
//todo!()
}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- `insert_reflect` relies on `reflect_type_path`, which doesn't gives
the actual type path for object created by `clone_value`, leading to an
unexpected panic. This is a workaround for it.
- Fix#10590
## Solution
- Tries to get type path from `get_represented_type_info` if get failed
from `reflect_type_path`.
---
## Defect remaining
- `get_represented_type_info` implies a shortage on performance than
using `TypeRegistry`.
# Objective
- Fixes#10676, preventing a possible memory leak for commands which
owned resources.
## Solution
Implemented `Drop` for `CommandQueue`. This has been done entirely in
the private API of `CommandQueue`, ensuring no breaking changes. Also
added a unit test, `test_command_queue_inner_drop_early`, based on the
reproduction steps as outlined in #10676.
## Notes
I believe this can be applied to `0.12.1` as well, but I am uncertain of
the process to make that kind of change. Please let me know if there's
anything I can do to help with the back-porting of this change.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Resolves#10743.
## Solution
Copied over the documentation written by @stepancheng from PR #10718.
I left out the lines from the doctest where `<()>` is removed, as that
seemed to be the part people couldn't decide on whether to keep or not.
## Objective
Currently, events are dropped after two frames. This cadence wasn't
*chosen* for a specific reason, double buffering just lets events
persist for at least two frames. Events only need to be dropped at a
predictable point so that the event queues don't grow forever (i.e.
events should never cause a memory leak).
Events (and especially input events) need to be observable by systems in
`FixedUpdate`, but as-is events are dropped before those systems even
get a chance to see them.
## Solution
Instead of unconditionally dropping events in `First`, require
`FixedUpdate` to first queue the buffer swap (if the `TimePlugin` has
been installed). This way, events are only dropped after a frame that
runs `FixedUpdate`.
## Future Work
In the same way we have independent copies of `Time` for tracking time
in `Main` and `FixedUpdate`, we will need independent copies of `Input`
for tracking press/release status correctly in `Main` and `FixedUpdate`.
--
Every run of `FixedUpdate` covers a specific timespan. For example, if
the fixed timestep `Δt` is 10ms, the first three `FixedUpdate` runs
cover `[0ms, 10ms)`, `[10ms, 20ms)`, and `[20ms, 30ms)`.
`FixedUpdate` can run many times in one frame. For truly
framerate-independent behavior, each `FixedUpdate` should only see the
events that occurred in its covered timespan, but what happens right now
is the first step in the frame reads all pending events.
Fixing that will require timestamped events.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Explain https://github.com/bevyengine/bevy/issues/10625.
This might be obvious to those familiar with Bevy internals, but it
surprised me.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- I've been experimenting with different patterns to try and make async
tasks more convenient. One of the better ones I've found is to return a
command queue to allow for deferred &mut World access. It can be
convenient to check for task completion in a normal system, but it is
hard to do something with the command queue after getting it back. This
pr adds a `append` to Commands. This allows appending the returned
command queue onto the system's commands.
## Solution
- I edited the async compute example to use the new `append`, but not
sure if I should keep the example changed as this might be too
opinionated.
## Future Work
- It would be very easy to pull the pattern used in the example out into
a plugin or a external crate, so users wouldn't have to add the checking
system.
---
## Changelog
- add `append` to `Commands` and `CommandQueue`
# Objective
Enables warning on `clippy::undocumented_unsafe_blocks` across the
workspace rather than only in `bevy_ecs`, `bevy_transform` and
`bevy_utils`. This adds a little awkwardness in a few areas of code that
have trivial safety or explain safety for multiple unsafe blocks with
one comment however automatically prevents these comments from being
missed.
## Solution
This adds `undocumented_unsafe_blocks = "warn"` to the workspace
`Cargo.toml` and fixes / adds a few missed safety comments. I also added
`#[allow(clippy::undocumented_unsafe_blocks)]` where the safety is
explained somewhere above.
There are a couple of safety comments I added I'm not 100% sure about in
`bevy_animation` and `bevy_render/src/view` and I'm not sure about the
use of `#[allow(clippy::undocumented_unsafe_blocks)]` compared to adding
comments like `// SAFETY: See above`.
# Objective
Make the impl block for RemovedSystem generic so that the methods can be
called for systems that have inputs or outputs.
## Solution
Simply adding generics to the impl block.
# Objective
Adds `.entry` to `EntityWorldMut` with `Entry`, `OccupiedEntry` and
`VacantEntry` for easier in-situ modification, based on `HashMap.entry`.
Fixes#10635
## Solution
This adds the `entry` method to `EntityWorldMut` which returns an
`Entry`. This is an enum of `OccupiedEntry` and `VacantEntry` and has
the methods `and_modify`, `insert_entry`, `or_insert`, `or_insert_with`
and `or_default`. The only difference between `OccupiedEntry` and
`VacantEntry` is the type, they are both a mutable reference to the
`EntityWorldMut` and a marker for the component type, `HashMap` also
stores things to make it quicker to access the data in `OccupiedEntry`
but I wasn't sure if we had anything it would be logical to store to
make accessing/modifying the component faster? As such, the differences
are that `OccupiedEntry` assumes the entity has the component (because
nothing else can have an `EntityWorldMut` so it can't be changed outside
the entry api) and has different methods.
All the methods are based very closely off `hashbrown::HashMap` (because
its easier to read the source of) with a couple of quirks like
`OccupiedEntry.insert` doesn't return the old value because we don't
appear to have an api for mem::replacing components.
---
## Changelog
- Added a new function `EntityWorldMut.entry` which returns an `Entry`,
allowing easier in-situ modification of a component.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
- Fix adding `#![allow(clippy::type_complexity)]` everywhere. like #9796
## Solution
- Use the new [lints] table that will land in 1.74
(https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#lints)
- inherit lint to the workspace, crates and examples.
```
[lints]
workspace = true
```
## Changelog
- Bump rust version to 1.74
- Enable lints table for the workspace
```toml
[workspace.lints.clippy]
type_complexity = "allow"
```
- Allow type complexity for all crates and examples
```toml
[lints]
workspace = true
```
---------
Co-authored-by: Martín Maita <47983254+mnmaita@users.noreply.github.com>
# Objective
- Follow up on https://github.com/bevyengine/bevy/pull/10519, diving
deeper into optimising `Entity` due to the `derive`d `PartialOrd`
`partial_cmp` not being optimal with codegen:
https://github.com/rust-lang/rust/issues/106107
- Fixes#2346.
## Solution
Given the previous PR's solution and the other existing LLVM codegen
bug, there seemed to be a potential further optimisation possible with
`Entity`. In exploring providing manual `PartialOrd` impl, it turned out
initially that the resulting codegen was not immediately better than the
derived version. However, once `Entity` was given `#[repr(align(8)]`,
the codegen improved remarkably, even more once the fields in `Entity`
were rearranged to correspond to a `u64` layout (Rust doesn't
automatically reorder fields correctly it seems). The field order and
`align(8)` additions also improved `to_bits` codegen to be a single
`mov` op. In turn, this led me to replace the previous
"non-shortcircuiting" impl of `PartialEq::eq` to use direct `to_bits`
comparison.
The result was remarkably better codegen across the board, even for
hastable lookups.
The current baseline codegen is as follows:
https://godbolt.org/z/zTW1h8PnY
Assuming the following example struct that mirrors with the existing
`Entity` definition:
```rust
#[derive(Clone, Copy, Eq, PartialEq, PartialOrd, Ord)]
pub struct FakeU64 {
high: u32,
low: u32,
}
```
the output for `to_bits` is as follows:
```
example::FakeU64::to_bits:
shl rdi, 32
mov eax, esi
or rax, rdi
ret
```
Changing the struct to:
```rust
#[derive(Clone, Copy, Eq)]
#[repr(align(8))]
pub struct FakeU64 {
low: u32,
high: u32,
}
```
and providing manual implementations for `PartialEq`/`PartialOrd`/`Ord`,
`to_bits` now optimises to:
```
example::FakeU64::to_bits:
mov rax, rdi
ret
```
The full codegen example for this PR is here for reference:
https://godbolt.org/z/n4Mjx165a
To highlight, `gt` comparison goes from
```
example::greater_than:
cmp edi, edx
jae .LBB3_2
xor eax, eax
ret
.LBB3_2:
setne dl
cmp esi, ecx
seta al
or al, dl
ret
```
to
```
example::greater_than:
cmp rdi, rsi
seta al
ret
```
As explained on Discord by @scottmcm :
>The root issue here, as far as I understand it, is that LLVM's
middle-end is inexplicably unwilling to merge loads if that would make
them under-aligned. It leaves that entirely up to its target-specific
back-end, and thus a bunch of the things that you'd expect it to do that
would fix this just don't happen.
## Benchmarks
Before discussing benchmarks, everything was tested on the following
specs:
AMD Ryzen 7950X 16C/32T CPU
64GB 5200 RAM
AMD RX7900XT 20GB Gfx card
Manjaro KDE on Wayland
I made use of the new entity hashing benchmarks to see how this PR would
improve things there. With the changes in place, I first did an
implementation keeping the existing "non shortcircuit" `PartialEq`
implementation in place, but with the alignment and field ordering
changes, which in the benchmark is the `ord_shortcircuit` column. The
`to_bits` `PartialEq` implementation is the `ord_to_bits` column. The
main_ord column is the current existing baseline from `main` branch.
My machine is not super set-up for benchmarking, so some results are
within noise, but there's not just a clear improvement between the
non-shortcircuiting implementation, but even further optimisation taking
place with the `to_bits` implementation.
On my machine, a fair number of the stress tests were not showing any
difference (indicating other bottlenecks), but I was able to get a clear
difference with `many_foxes` with a fox count of 10,000:
Test with `cargo run --example many_foxes --features
bevy/trace_tracy,wayland --release -- --count 10000`:
On avg, a framerate of about 28-29FPS was improved to 30-32FPS. "This
trace" represents the current PR's perf, while "External trace"
represents the `main` branch baseline.
## Changelog
Changed: micro-optimized Entity align and field ordering as well as
providing manual `PartialOrd`/`Ord` impls to help LLVM optimise further.
## Migration Guide
Any `unsafe` code relying on field ordering of `Entity` or sufficiently
cursed shenanigans should change to reflect the different internal
representation and alignment requirements of `Entity`.
Co-authored-by: james7132 <contact@jamessliu.com>
Co-authored-by: NathanW <nathansward@comcast.net>
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
Allows chained systems taking an `In<_>` input parameter to be run as
one-shot systems. This API was mentioned in #8963.
In addition, `run_system(_with_input)` returns the system output, for
any `'static` output type.
## Solution
A new function, `World::run_system_with_input` allows a `SystemId<I, O>`
to be run by providing an `I` value as input and producing `O` as an
output.
`SystemId<I, O>` is now generic over the input type `I` and output type
`O`, along with the related functions and types `RegisteredSystem`,
`RemovedSystem`, `register_system`, `remove_system`, and
`RegisteredSystemError`. These default to `()`, preserving the existing
API, for all of the public types.
---
## Changelog
- Added `World::run_system_with_input` function to allow one-shot
systems that take `In<_>` input parameters
- Changed `World::run_system` and `World::register_system` to support
systems with return types beyond `()`
- Added `Commands::run_system_with_input` command that schedules a
one-shot system with an `In<_>` input parameter
(This is my first PR here, so I've probably missed some things. Please
let me know what else I should do to help you as a reviewer!)
# Objective
Due to https://github.com/rust-lang/rust/issues/117800, the `derive`'d
`PartialEq::eq` on `Entity` isn't as good as it could be. Since that's
used in hashtable lookup, let's improve it.
## Solution
The derived `PartialEq::eq` short-circuits if the generation doesn't
match. However, having a branch there is sub-optimal, especially on
64-bit systems like x64 that could just load the whole `Entity` in one
load anyway.
Due to complications around `poison` in LLVM and the exact details of
what unsafe code is allowed to do with reference in Rust
(https://github.com/rust-lang/unsafe-code-guidelines/issues/346), LLVM
isn't allowed to completely remove the short-circuiting. `&Entity` is
marked `dereferencable(8)` so LLVM knows it's allowed to *load* all 8
bytes -- and does so -- but it has to assume that the `index` might be
undef/poison if the `generation` doesn't match, and thus while it finds
a way to do it without needing a branch, it has to do something slightly
more complicated than optimal to combine the results. (LLVM is allowed
to change non-short-circuiting code to use branches, but not the other
way around.)
Here's a link showing the codegen today:
<https://rust.godbolt.org/z/9WzjxrY7c>
```rust
#[no_mangle]
pub fn demo_eq_ref(a: &Entity, b: &Entity) -> bool {
a == b
}
```
ends up generating the following assembly:
```asm
demo_eq_ref:
movq xmm0, qword ptr [rdi]
movq xmm1, qword ptr [rsi]
pcmpeqd xmm1, xmm0
pshufd xmm0, xmm1, 80
movmskpd eax, xmm0
cmp eax, 3
sete al
ret
```
(It's usually not this bad in real uses after inlining and LTO, but it
makes a strong demo.)
This PR manually implements `PartialEq::eq` *without* short-circuiting,
and because that tells LLVM that neither the generations nor the index
can be poison, it doesn't need to be so careful and can generate the
"just compare the two 64-bit values" code you'd have probably already
expected:
```asm
demo_eq_ref:
mov rax, qword ptr [rsi]
cmp qword ptr [rdi], rax
sete al
ret
```
Since this doesn't change the representation of `Entity`, if it's
instead passed by *value*, then each `Entity` is two `u32` registers,
and the old and the new code do exactly the same thing. (Other
approaches, like changing `Entity` to be `[u32; 2]` or `u64`, affect
this case.)
This should hopefully merge easily with changes like
https://github.com/bevyengine/bevy/pull/9907 that also want to change
`Entity`.
## Benchmarks
I'm not super-confident that I got my machine fully consistent for
benchmarking, but whether I run the old or the new one first I get
reasonably consistent results.
Here's a fairly typical example of the benchmarks I added in this PR:
Building the sets seems to be basically the same. It's usually reported
as noise, but sometimes I see a few percent slower or faster.
But lookup hits in particular -- since a hit checks that the key is
equal -- consistently shows around 10% improvement.
`cargo run --example many_cubes --features bevy/trace_tracy --release --
--benchmark` showed as slightly faster with this change, though if I had
to bet I'd probably say it's more noise than meaningful (but at least
it's not worse either):
This is my first PR here -- and my first time running Tracy -- so please
let me know what else I should run, or run things on your own more
reliable machines to double-check.
---
## Changelog
(probably not worth including)
Changed: micro-optimized `Entity::eq` to help LLVM slightly.
## Migration Guide
(I really hope nobody was using this on uninitialized entities where
sufficiently tortured `unsafe` could could technically notice that this
has changed.)
# Objective
- `CommandQueue::apply` calculates the address of the end of the
internal buffer as a `usize` rather than as a pointer, requiring two
casts of `cursor` to `usize`. Casting pointers to integers is generally
discouraged and may also prevent optimizations. It's also unnecessary
here.
## Solution
- Calculate the end address as a pointer rather than a `usize`.
Small note:
A trivial translation of the old code to use pointers would have
computed `end_addr` as `cursor.add(self.bytes.len())`, which is not
wrong but is an additional `unsafe` operation that also needs to be
properly documented and proven correct. However this operation is
already implemented in the form of the safe `as_mut_ptr_range`, so I
just used that.
# Objective
There is an if statement checking if a node is present in a graph
moments after it explicitly being added.
Unless the edge function has super weird side effects and the tests
don't pass, this is unnecessary.
## Solution
Removed it
# Objective
- Allow registration of one-shot systems when those systems have already
been `Box`ed.
- Needed for `bevy_eventlisteners` which allows adding event listeners
with callbacks in normal systems. The current one shot system
implementation requires systems be registered from an exclusive system,
and that those systems be passed in as types that implement
`IntoSystem`. However, the eventlistener callback crate allows users to
define their callbacks in normal systems, by boxing the system and
deferring initialization to an exclusive system.
## Solution
- Separate the registration of the system from the boxing of the system.
This is non-breaking, and adds a new method.
---
## Changelog
- Added `World::register_boxed_system` to allow registration of
already-boxed one shot systems.
# Objective
- There is a specialized hasher for entities:
[`EntityHashMap`](https://docs.rs/bevy/latest/bevy/utils/type.EntityHashMap.html)
- [`EntityMapper`] currently uses a normal `HashMap<Entity, Entity>`
- Fixes#10391
## Solution
- Replace the normal `HashMap` with the more performant `EntityHashMap`
## Questions
- This does change public API. Should a system be implemented to help
migrate code?
- Perhaps an `impl From<HashMap<K, V, S>> for EntityHashMap<K, V>`
- I updated to docs for each function that I changed, but I may have
missed something
---
## Changelog
- Changed `EntityMapper` to use `EntityHashMap` instead of normal
`HashMap`
## Migration Guide
If you are using the following types, update their listed methods to use
the new `EntityHashMap`. `EntityHashMap` has the same methods as the
normal `HashMap`, so you just need to replace the name.
### `EntityMapper`
- `get_map`
- `get_mut_map`
- `new`
- `world_scope`
### `ReflectMapEntities`
- `map_all_entities`
- `map_entities`
- `write_to_world`
### `InstanceInfo`
- `entity_map`
- This is a property, not a method.
---
This is my first time contributing in a while, and I'm not familiar with
the usage of `EntityMapper`. I changed the type definition and fixed all
errors, but there may have been things I've missed. Please keep an eye
out for me!
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Align all error-like types to implement `Error`.
Fixes #10176
## Solution
- Derive `Error` on more types
- Refactor instances of manual implementations that could be derived
This adds thiserror as a dependency to bevy_transform, which might
increase compilation time -- but I don't know of any situation where you
might only use that but not any other crate that pulls in bevy_utils.
The `contributors` example has a `LoadContributorsError` type, but as
it's an example I have not updated it. Doing that would mean either
having a `use bevy_internal::utils::thiserror::Error;` in an example
file, or adding `thiserror` as a dev-dependency to the main `bevy`
crate.
---
## Changelog
- All `…Error` types now implement the `Error` trait
# Objective
First of all, this PR took heavy inspiration from #7760 and #5715. It
intends to also fix#5569, but with a slightly different approach.
This also fixes#9335 by reexporting `DynEq`.
## Solution
The advantage of this API is that we can intern a value without
allocating for zero-sized-types and for enum variants that have no
fields. This PR does this automatically in the `SystemSet` and
`ScheduleLabel` derive macros for unit structs and fieldless enum
variants. So this should cover many internal and external use cases of
`SystemSet` and `ScheduleLabel`. In these optimal use cases, no memory
will be allocated.
- The interning returns a `Interned<dyn SystemSet>`, which is just a
wrapper around a `&'static dyn SystemSet`.
- `Hash` and `Eq` are implemented in terms of the pointer value of the
reference, similar to my first approach of anonymous system sets in
#7676.
- Therefore, `Interned<T>` does not implement `Borrow<T>`, only `Deref`.
- The debug output of `Interned<T>` is the same as the interned value.
Edit:
- `AppLabel` is now also interned and the old
`derive_label`/`define_label` macros were replaced with the new
interning implementation.
- Anonymous set ids are reused for different `Schedule`s, reducing the
amount of leaked memory.
### Pros
- `InternedSystemSet` and `InternedScheduleLabel` behave very similar to
the current `BoxedSystemSet` and `BoxedScheduleLabel`, but can be copied
without an allocation.
- Many use cases don't allocate at all.
- Very fast lookups and comparisons when using `InternedSystemSet` and
`InternedScheduleLabel`.
- The `intern` module might be usable in other areas.
- `Interned{ScheduleLabel, SystemSet, AppLabel}` does implement
`{ScheduleLabel, SystemSet, AppLabel}`, increasing ergonomics.
### Cons
- Implementors of `SystemSet` and `ScheduleLabel` still need to
implement `Hash` and `Eq` (and `Clone`) for it to work.
## Changelog
### Added
- Added `intern` module to `bevy_utils`.
- Added reexports of `DynEq` to `bevy_ecs` and `bevy_app`.
### Changed
- Replaced `BoxedSystemSet` and `BoxedScheduleLabel` with
`InternedSystemSet` and `InternedScheduleLabel`.
- Replaced `impl AsRef<dyn ScheduleLabel>` with `impl ScheduleLabel`.
- Replaced `AppLabelId` with `InternedAppLabel`.
- Changed `AppLabel` to use `Debug` for error messages.
- Changed `AppLabel` to use interning.
- Changed `define_label`/`derive_label` to use interning.
- Replaced `define_boxed_label`/`derive_boxed_label` with
`define_label`/`derive_label`.
- Changed anonymous set ids to be only unique inside a schedule, not
globally.
- Made interned label types implement their label trait.
### Removed
- Removed `define_boxed_label` and `derive_boxed_label`.
## Migration guide
- Replace `BoxedScheduleLabel` and `Box<dyn ScheduleLabel>` with
`InternedScheduleLabel` or `Interned<dyn ScheduleLabel>`.
- Replace `BoxedSystemSet` and `Box<dyn SystemSet>` with
`InternedSystemSet` or `Interned<dyn SystemSet>`.
- Replace `AppLabelId` with `InternedAppLabel` or `Interned<dyn
AppLabel>`.
- Types manually implementing `ScheduleLabel`, `AppLabel` or `SystemSet`
need to implement:
- `dyn_hash` directly instead of implementing `DynHash`
- `as_dyn_eq`
- Pass labels to `World::try_schedule_scope`, `World::schedule_scope`,
`World::try_run_schedule`. `World::run_schedule`, `Schedules::remove`,
`Schedules::remove_entry`, `Schedules::contains`, `Schedules::get` and
`Schedules::get_mut` by value instead of by reference.
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Reduce code duplication and improve APIs of Bevy's [global
taskpools](https://github.com/bevyengine/bevy/blob/main/crates/bevy_tasks/src/usages.rs).
## Solution
- As all three of the global taskpools have identical implementations
and only differ in their identifiers, this PR moves the implementation
into a macro to reduce code duplication.
- The `init` method is renamed to `get_or_init` to more accurately
reflect what it really does.
- Add a new `try_get` method that just returns `None` when the pool is
uninitialized, to complement the other getter methods.
- Minor documentation improvements to accompany the above changes.
---
## Changelog
- Added a new `try_get` method to the global TaskPools
- The global TaskPools' `init` method has been renamed to `get_or_init`
for clarity
- Documentation improvements
## Migration Guide
- Uses of `ComputeTaskPool::init`, `AsyncComputeTaskPool::init` and
`IoTaskPool::init` should be changed to `::get_or_init`.
# Objective
Closes#9955.
Use the same interface for all "pure" builder types: taking and
returning `Self` (and not `&mut Self`).
## Solution
Changed `DynamicSceneBuilder`, `SceneFilter` and `TableBuilder` to take
and return `Self`.
## Changelog
### Changed
- `DynamicSceneBuilder` and `SceneBuilder` methods in `bevy_ecs` now
take and return `Self`.
## Migration guide
When using `bevy_ecs::DynamicSceneBuilder` and `bevy_ecs::SceneBuilder`,
instead of binding the builder to a variable, directly use it. Methods
on those types now consume `Self`, so you will need to re-bind the
builder if you don't `build` it immediately.
Before:
```rust
let mut scene_builder = DynamicSceneBuilder::from_world(&world);
let scene = scene_builder.extract_entity(a).extract_entity(b).build();
```
After:
```rust
let scene = DynamicSceneBuilder::from_world(&world)
.extract_entity(a)
.extract_entity(b)
.build();
```
# Objective
- Followup to #7184.
- ~Deprecate `TypeUuid` and remove its internal references.~ No longer
part of this PR.
- Use `TypePath` for the type registry, and (de)serialisation instead of
`std::any::type_name`.
- Allow accessing type path information behind proxies.
## Solution
- Introduce methods on `TypeInfo` and friends for dynamically querying
type path. These methods supersede the old `type_name` methods.
- Remove `Reflect::type_name` in favor of `DynamicTypePath::type_path`
and `TypeInfo::type_path_table`.
- Switch all uses of `std::any::type_name` in reflection, non-debugging
contexts to use `TypePath`.
---
## Changelog
- Added `TypePathTable` for dynamically accessing methods on `TypePath`
through `TypeInfo` and the type registry.
- Removed `type_name` from all `TypeInfo`-like structs.
- Added `type_path` and `type_path_table` methods to all `TypeInfo`-like
structs.
- Removed `Reflect::type_name` in favor of
`DynamicTypePath::reflect_type_path` and `TypeInfo::type_path`.
- Changed the signature of all `DynamicTypePath` methods to return
strings with a static lifetime.
## Migration Guide
- Rely on `TypePath` instead of `std::any::type_name` for all stability
guarantees and for use in all reflection contexts, this is used through
with one of the following APIs:
- `TypePath::type_path` if you have a concrete type and not a value.
- `DynamicTypePath::reflect_type_path` if you have an `dyn Reflect`
value without a concrete type.
- `TypeInfo::type_path` for use through the registry or if you want to
work with the represented type of a `DynamicFoo`.
- Remove `type_name` from manual `Reflect` implementations.
- Use `type_path` and `type_path_table` in place of `type_name` on
`TypeInfo`-like structs.
- Use `get_with_type_path(_mut)` over `get_with_type_name(_mut)`.
## Note to reviewers
I think if anything we were a little overzealous in merging #7184 and we
should take that extra care here.
In my mind, this is the "point of no return" for `TypePath` and while I
think we all agree on the design, we should carefully consider if the
finer details and current implementations are actually how we want them
moving forward.
For example [this incorrect `TypePath` implementation for
`String`](3fea3c6c0b/crates/bevy_reflect/src/impls/std.rs (L90))
(note that `String` is in the default Rust prelude) snuck in completely
under the radar.
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
# Objective
- Fixes#9884
- Add API for ignoring ambiguities on certain resource or components.
## Solution
- Add a `IgnoreSchedulingAmbiguitiy` resource to the world which holds
the `ComponentIds` to be ignored
- Filter out ambiguities with those component id's.
## Changelog
- add `allow_ambiguous_component` and `allow_ambiguous_resource` apis
for ignoring ambiguities
---------
Co-authored-by: Ryan Johnson <ryanj00a@gmail.com>
Objective
---------
- Since #6742, It is not possible to build an `ArchetypeId` from a
`ArchetypeGeneration`
- This was useful to 3rd party crate extending the base bevy ECS
capabilities, such as [`bevy_ecs_dynamic`] and now
[`bevy_mod_dynamic_query`]
- Making `ArchetypeGeneration` opaque this way made it completely
useless, and removed the ability to limit archetype updates to a subset
of archetypes.
- Making the `index` method on `ArchetypeId` private prevented the use
of bitfields and other optimized data structure to store sets of
archetype ids. (without `transmute`)
This PR is not a simple reversal of the change. It exposes a different
API, rethought to keep the private stuff private and the public stuff
less error-prone.
- Add a `StartRange<ArchetypeGeneration>` `Index` implementation to
`Archetypes`
- Instead of converting the generation into an index, then creating a
ArchetypeId from that index, and indexing `Archetypes` with it, use
directly the old `ArchetypeGeneration` to get the range of new
archetypes.
From careful benchmarking, it seems to also be a performance improvement
(~0-5%) on add_archetypes.
---
Changelog
---------
- Added `impl Index<RangeFrom<ArchetypeGeneration>> for Archetypes` this
allows you to get a slice of newly added archetypes since the last
recorded generation.
- Added `ArchetypeId::index` and `ArchetypeId::new` methods. It should
enable 3rd party crates to use the `Archetypes` API in a meaningful way.
[`bevy_ecs_dynamic`]:
https://github.com/jakobhellermann/bevy_ecs_dynamic/tree/main
[`bevy_mod_dynamic_query`]:
https://github.com/nicopap/bevy_mod_dynamic_query/
---------
Co-authored-by: vero <email@atlasdostal.com>
# Objective
We've done a lot of work to remove the pattern of a `&World` with
interior mutability (#6404, #8833). However, this pattern still persists
within `bevy_ecs` via the `unsafe_world` method.
## Solution
* Make `unsafe_world` private. Adjust any callsites to use
`UnsafeWorldCell` for interior mutability.
* Add `UnsafeWorldCell::removed_components`, since it is always safe to
access the removed components collection through `UnsafeWorldCell`.
## Future Work
Remove/hide `UnsafeWorldCell::world_metadata`, once we have provided
safe ways of accessing all world metadata.
---
## Changelog
+ Added `UnsafeWorldCell::removed_components`, which provides read-only
access to a world's collection of removed components.
# Objective
Add a new method so you can do `set_if_neq` with dereferencing
components: `as_deref_mut()`!
## Solution
Added an as_deref_mut method so that we can use `set_if_neq()` without
having to wrap up types for derefencable components
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
The `States::variants` method was once used to construct `OnExit` and
`OnEnter` schedules for every possible value of a given `States` type.
[Since the switch to lazily initialized
schedules](https://github.com/bevyengine/bevy/pull/8028/files#diff-b2fba3a0c86e496085ce7f0e3f1de5960cb754c7d215ed0f087aa556e529f97f),
we no longer need to track every possible value.
This also opens the door to `States` types that aren't enums.
## Solution
- Remove the unused `States::variants` method and its associated type.
- Remove the enum-only restriction on derived States types.
---
## Changelog
- Removed `States::variants` and its associated type.
- Derived `States` can now be datatypes other than enums.
## Migration Guide
- `States::variants` no longer exists. If you relied on this function,
consider using a library that provides enum iterators.
# Objective
- There were a few typos in the project.
- This PR fixes these typos.
## Solution
- Fixing the typos.
Signed-off-by: SADIK KUZU <sadikkuzu@hotmail.com>
# Objective
- Improve rendering performance, particularly by avoiding the large
system commands costs of using the ECS in the way that the render world
does.
## Solution
- Define `EntityHasher` that calculates a hash from the
`Entity.to_bits()` by `i | (i.wrapping_mul(0x517cc1b727220a95) << 32)`.
`0x517cc1b727220a95` is something like `u64::MAX / N` for N that gives a
value close to π and that works well for hashing. Thanks for @SkiFire13
for the suggestion and to @nicopap for alternative suggestions and
discussion. This approach comes from `rustc-hash` (a.k.a. `FxHasher`)
with some tweaks for the case of hashing an `Entity`. `FxHasher` and
`SeaHasher` were also tested but were significantly slower.
- Define `EntityHashMap` type that uses the `EntityHashser`
- Use `EntityHashMap<Entity, T>` for render world entity storage,
including:
- `RenderMaterialInstances` - contains the `AssetId<M>` of the material
associated with the entity. Also for 2D.
- `RenderMeshInstances` - contains mesh transforms, flags and properties
about mesh entities. Also for 2D.
- `SkinIndices` and `MorphIndices` - contains the skin and morph index
for an entity, respectively
- `ExtractedSprites`
- `ExtractedUiNodes`
## Benchmarks
All benchmarks have been conducted on an M1 Max connected to AC power.
The tests are run for 1500 frames. The 1000th frame is captured for
comparison to check for visual regressions. There were none.
### 2D Meshes
`bevymark --benchmark --waves 160 --per-wave 1000 --mode mesh2d`
#### `--ordered-z`
This test spawns the 2D meshes with z incrementing back to front, which
is the ideal arrangement allocation order as it matches the sorted
render order which means lookups have a high cache hit rate.
<img width="1112" alt="Screenshot 2023-09-27 at 07 50 45"
src="https://github.com/bevyengine/bevy/assets/302146/e140bc98-7091-4a3b-8ae1-ab75d16d2ccb">
-39.1% median frame time.
#### Random
This test spawns the 2D meshes with random z. This not only makes the
batching and transparent 2D pass lookups get a lot of cache misses, it
also currently means that the meshes are almost certain to not be
batchable.
<img width="1108" alt="Screenshot 2023-09-27 at 07 51 28"
src="https://github.com/bevyengine/bevy/assets/302146/29c2e813-645a-43ce-982a-55df4bf7d8c4">
-7.2% median frame time.
### 3D Meshes
`many_cubes --benchmark`
<img width="1112" alt="Screenshot 2023-09-27 at 07 51 57"
src="https://github.com/bevyengine/bevy/assets/302146/1a729673-3254-4e2a-9072-55e27c69f0fc">
-7.7% median frame time.
### Sprites
**NOTE: On `main` sprites are using `SparseSet<Entity, T>`!**
`bevymark --benchmark --waves 160 --per-wave 1000 --mode sprite`
#### `--ordered-z`
This test spawns the sprites with z incrementing back to front, which is
the ideal arrangement allocation order as it matches the sorted render
order which means lookups have a high cache hit rate.
<img width="1116" alt="Screenshot 2023-09-27 at 07 52 31"
src="https://github.com/bevyengine/bevy/assets/302146/bc8eab90-e375-4d31-b5cd-f55f6f59ab67">
+13.0% median frame time.
#### Random
This test spawns the sprites with random z. This makes the batching and
transparent 2D pass lookups get a lot of cache misses.
<img width="1109" alt="Screenshot 2023-09-27 at 07 53 01"
src="https://github.com/bevyengine/bevy/assets/302146/22073f5d-99a7-49b0-9584-d3ac3eac3033">
+0.6% median frame time.
### UI
**NOTE: On `main` UI is using `SparseSet<Entity, T>`!**
`many_buttons`
<img width="1111" alt="Screenshot 2023-09-27 at 07 53 26"
src="https://github.com/bevyengine/bevy/assets/302146/66afd56d-cbe4-49e7-8b64-2f28f6043d85">
+15.1% median frame time.
## Alternatives
- Cart originally suggested trying out `SparseSet<Entity, T>` and indeed
that is slightly faster under ideal conditions. However,
`PassHashMap<Entity, T>` has better worst case performance when data is
randomly distributed, rather than in sorted render order, and does not
have the worst case memory usage that `SparseSet`'s dense `Vec<usize>`
that maps from the `Entity` index to sparse index into `Vec<T>`. This
dense `Vec` has to be as large as the largest Entity index used with the
`SparseSet`.
- I also tested `PassHashMap<u32, T>`, intending to use `Entity.index()`
as the key, but this proved to sometimes be slower and mostly no
different.
- The only outstanding approach that has not been implemented and tested
is to _not_ clear the render world of its entities each frame. That has
its own problems, though they could perhaps be solved.
- Performance-wise, if the entities and their component data were not
cleared, then they would incur table moves on spawn, and should not
thereafter, rather just their component data would be overwritten.
Ideally we would have a neat way of either updating data in-place via
`&mut T` queries, or inserting components if not present. This would
likely be quite cumbersome to have to remember to do everywhere, but
perhaps it only needs to be done in the more performance-sensitive
systems.
- The main problem to solve however is that we want to both maintain a
mapping between main world entities and render world entities, be able
to run the render app and world in parallel with the main app and world
for pipelined rendering, and at the same time be able to spawn entities
in the render world in such a way that those Entity ids do not collide
with those spawned in the main world. This is potentially quite
solvable, but could well be a lot of ECS work to do it in a way that
makes sense.
---
## Changelog
- Changed: Component data for entities to be drawn are no longer stored
on entities in the render world. Instead, data is stored in a
`EntityHashMap<Entity, T>` in various resources. This brings significant
performance benefits due to the way the render app clears entities every
frame. Resources of most interest are `RenderMeshInstances` and
`RenderMaterialInstances`, and their 2D counterparts.
## Migration Guide
Previously the render app extracted mesh entities and their component
data from the main world and stored them as entities and components in
the render world. Now they are extracted into essentially
`EntityHashMap<Entity, T>` where `T` are structs containing an
appropriate group of data. This means that while extract set systems
will continue to run extract queries against the main world they will
store their data in hash maps. Also, systems in later sets will either
need to look up entities in the available resources such as
`RenderMeshInstances`, or maintain their own `EntityHashMap<Entity, T>`
for their own data.
Before:
```rust
fn queue_custom(
material_meshes: Query<(Entity, &MeshTransforms, &Handle<Mesh>), With<InstanceMaterialData>>,
) {
...
for (entity, mesh_transforms, mesh_handle) in &material_meshes {
...
}
}
```
After:
```rust
fn queue_custom(
render_mesh_instances: Res<RenderMeshInstances>,
instance_entities: Query<Entity, With<InstanceMaterialData>>,
) {
...
for entity in &instance_entities {
let Some(mesh_instance) = render_mesh_instances.get(&entity) else { continue; };
// The mesh handle in `AssetId<Mesh>` form, and the `MeshTransforms` can now
// be found in `mesh_instance` which is a `RenderMeshInstance`
...
}
}
```
---------
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
Scheduling low cost systems has significant overhead due to task pool
contention and the extra machinery to schedule and run them. Event
update systems are the prime example of a low cost system, requiring a
guaranteed O(1) operation, and there are a *lot* of them.
## Solution
Add a run condition to every event system so they only run when there is
an event in either of it's two internal Vecs.
---
## Changelog
Changed: Event update systems will not run if there are no events to
process.
## Migration Guide
`Events<T>::update_system` has been split off from the the type and can
be found at `bevy_ecs::event::event_update_system`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
Improve code-gen for `QueryState::validate_world` and
`SystemState::validate_world`.
## Solution
* Move panics into separate, non-inlined functions, to reduce the code
size of the outer methods.
* Mark the panicking functions with `#[cold]` to help the compiler
optimize for the happy path.
* Mark the functions with `#[track_caller]` to make debugging easier.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Occasionally, it is useful to pull `ComponentInfo` or
`ComponentDescriptor` out of the `Components` collection so that they
can be inspected without borrowing the whole `World`.
## Solution
Make `ComponentInfo` and `ComponentDescriptor` `Clone`, so that
reflection-heavy code can store them in a side table.
---
## Changelog
- Implement `Clone` for `ComponentInfo` and `ComponentDescriptor`
# Objective
- I spoke with some users in the ECS channel of bevy discord today and
they suggested that I implement a fallible form of .insert for
components.
- In my opinion, it would be nice to have a fallible .insert like
.try_insert (or to just make insert be fallible!) because it was causing
a lot of panics in my game. In my game, I am spawning terrain chunks and
despawning them in the Update loop. However, this was causing bevy_xpbd
to panic because it was trying to .insert some physics components on my
chunks and a race condition meant that its check to see if the entity
exists would pass but then the next execution step it would not exist
and would do an .insert and then panic. This means that there is no way
to avoid a panic with conditionals.
Luckily, bevy_xpbd does not care about inserting these components if the
entity is being deleted and so if there were a .try_insert, like this PR
provides it could use that instead in order to NOT panic.
( My interim solution for my own game has been to run the entity despawn
events in the Last schedule but really this is just a hack and I should
not be expected to manage the scheduling of despawns like this - it
should just be easy and simple. IF it just so happened that bevy_xpbd
ran .inserts in the Last schedule also, this would be an untenable soln
overall )
## Solution
- Describe the solution used to achieve the objective above.
Add a new command named TryInsert (entitycommands.try_insert) which
functions exactly like .insert except if the entity does not exist it
will not panic. Instead, it will log to info. This way, crates that are
attaching components in ways which they do not mind that the entity no
longer exists can just use try_insert instead of insert.
---
## Changelog
## Additional Thoughts
In my opinion, NOT panicing should really be the default and having an
.insert that does panic should be the odd edgecase but removing the
panic! from .insert seems a bit above my paygrade -- although i would
love to see it. My other thought is it would be good for .insert to
return an Option AND not panic but it seems it uses an event bus right
now so that seems to be impossible w the current architecture.
# Objective
Currently, in bevy, it's valid to do `Query<&mut Foo, Changed<Foo>>`.
This assumes that `filter_fetch` and `fetch` are mutually exclusive,
because of the mutable reference to the tick that `Mut<Foo>` implies and
the reference that `Changed<Foo>` implies. However nothing guarantees
that.
## Solution
Documenting this assumption as a safety invariant is the least thing.
I'm adopting this ~~child~~ PR.
# Objective
- Working with exclusive world access is not always easy: in many cases,
a standard system or three is more ergonomic to write, and more
modularly maintainable.
- For small, one-off tasks (commonly handled with scripting), running an
event-reader system incurs a small but flat overhead cost and muddies
the schedule.
- Certain forms of logic (e.g. turn-based games) want very fine-grained
linear and/or branching control over logic.
- SystemState is not automatically cached, and so performance can suffer
and change detection breaks.
- Fixes https://github.com/bevyengine/bevy/issues/2192.
- Partial workaround for https://github.com/bevyengine/bevy/issues/279.
## Solution
- Adds a SystemRegistry resource to the World, which stores initialized
systems keyed by their SystemSet.
- Allows users to call world.run_system(my_system) and
commands.run_system(my_system), without re-initializing or losing state
(essential for change detection).
- Add a Callback type to enable convenient use of dynamic one shot
systems and reduce the mental overhead of working with Box<dyn
SystemSet>.
- Allow users to run systems based on their SystemSet, enabling more
complex user-made abstractions.
## Future work
- Parameterized one-shot systems would improve reusability and bring
them closer to events and commands. The API could be something like
run_system_with_input(my_system, my_input) and use the In SystemParam.
- We should evaluate the unification of commands and one-shot systems
since they are two different ways to run logic on demand over a World.
### Prior attempts
- https://github.com/bevyengine/bevy/pull/2234
- https://github.com/bevyengine/bevy/pull/2417
- https://github.com/bevyengine/bevy/pull/4090
- https://github.com/bevyengine/bevy/pull/7999
This PR continues the work done in
https://github.com/bevyengine/bevy/pull/7999.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Federico Rinaldi <gisquerin@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Aevyrie <aevyrie@gmail.com>
Co-authored-by: Alejandro Pascual Pozo <alejandro.pascual.pozo@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Dmytro Banin <banind@cs.washington.edu>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Replace instances of
```rust
for x in collection.iter{_mut}() {
```
with
```rust
for x in &{mut} collection {
```
This also changes CI to no longer suppress this lint. Note that since
this lint only shows up when using clippy in pedantic mode, it was
probably unnecessary to suppress this lint in the first place.
# Objective
- When reading API docs and seeing a reference to `ComponentId`, it
isn't immediately clear how to get one from your `Component`. It could
be made to be more clear.
## Solution
- Improve cross-linking of docs about `ComponentId`
# Objective
The default division for a `usize` rounds down which means the batch
sizes were too small when the `max_size` isn't exactly divisible by the
batch count.
## Solution
Changing the division to round up fixes this which can dramatically
improve performance when using `par_iter`.
I created a small example to proof this out and measured some results. I
don't know if it's worth committing this permanently so I left it out of
the PR for now.
```rust
use std::{thread, time::Duration};
use bevy::{
prelude::*,
window::{PresentMode, WindowPlugin},
};
fn main() {
App::new()
.add_plugins((DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
present_mode: PresentMode::AutoNoVsync,
..default()
}),
..default()
}),))
.add_systems(Startup, spawn)
.add_systems(Update, update_counts)
.run();
}
#[derive(Component, Default, Debug, Clone, Reflect)]
pub struct Count(u32);
fn spawn(mut commands: Commands) {
// Worst case
let tasks = bevy::tasks::available_parallelism() * 5 - 1;
// Best case
// let tasks = bevy::tasks::available_parallelism() * 5 + 1;
for _ in 0..tasks {
commands.spawn(Count(0));
}
}
// changing the bounds of the text will cause a recomputation
fn update_counts(mut count_query: Query<&mut Count>) {
count_query.par_iter_mut().for_each(|mut count| {
count.0 += 1;
thread::sleep(Duration::from_millis(10))
});
}
```
## Results
I ran this four times, with and without the change, with best case
(should favour the old maths) and worst case (should favour the new
maths) task numbers.
### Worst case
Before the change the batches were 9 on each thread, plus the 5
remainder ran on one of the threads in addition. With the change its 10
on each thread apart from one which has 9. The results show a decrease
from ~140ms to ~100ms which matches what you would expect from the maths
(`10 * 10ms` vs `(9 + 4) * 10ms`).
### Best case
Before the change the batches were 10 on each thread, plus the 1
remainder ran on one of the threads in addition. With the change its 11
on each thread apart from one which has 5. The results slightly favour
the new change but are basically identical as the total time is
determined by the worse case which is `11 * 10ms` for both tests.
# Objective
The reasoning is similar to #8687.
I'm building a dynamic query. Currently, I store the ReflectFromPtr in
my dynamic `Fetch` type.
[See relevant
code](97ba68ae1e/src/fetches.rs (L14-L17))
However, `ReflectFromPtr` is:
- 16 bytes for TypeId
- 8 bytes for the non-mutable function pointer
- 8 bytes for the mutable function pointer
It's a lot, it adds 32 bytes to my base `Fetch` which is only
`ComponendId` (8 bytes) for a total of 40 bytes.
I only need one function per fetch, reducing the total dynamic fetch
size to 16 bytes.
Since I'm querying the components by the ComponendId associated with the
function pointer I'm using, I don't need the TypeId, it's a redundant
check.
In fact, I've difficulties coming up with situations where checking the
TypeId beforehand is relevant. So to me, if ReflectFromPtr makes sense
as a public API, exposing the function pointers also makes sense.
## Solution
- Make the fields public through methods.
---
## Changelog
- Add `from_ptr` and `from_ptr_mut` methods to `ReflectFromPtr` to
access the underlying function pointers
- `ReflectFromPtr::as_reflect_ptr` is now `ReflectFromPtr::as_reflect`
- `ReflectFromPtr::as_reflect_ptr_mut` is now
`ReflectFromPtr::as_reflect_mut`
## Migration guide
- `ReflectFromPtr::as_reflect_ptr` is now `ReflectFromPtr::as_reflect`
- `ReflectFromPtr::as_reflect_ptr_mut` is now
`ReflectFromPtr::as_reflect_mut`
# Objective
Rename RemovedComponents::iter/iter_with_id to read/read_with_id to make
it clear that it consume the data
Fixes#9755.
(It's my first pull request, if i've made any mistake, please let me
know)
## Solution
Refactor RemovedComponents::iter/iter_with_id to read/read_with_id
## Changelog
Refactor RemovedComponents::iter/iter_with_id to read/read_with_id
Deprecate RemovedComponents::iter/iter_with_id
Remove IntoIterator implementation
Update removal_detection example accordingly
---
## Migration Guide
Rename calls of RemovedComponents::iter/iter_with_id to
read/read_with_id
Replace IntoIterator iteration (&mut <RemovedComponents>) with .read()
---------
Co-authored-by: denshi_ika <mojang2824@gmail.com>
# Objective
When using `set_if_neq`, sometimes you'd like to know if the new value
was different from the old value so that you can perform some additional
branching.
## Solution
Return a bool from this function, which indicates whether or not the
value was overwritten.
---
## Changelog
* `DetectChangesMut::set_if_neq` now returns a boolean indicating
whether or not the value was changed.
## Migration Guide
The trait method `DetectChangesMut::set_if_neq` now returns a boolean
value indicating whether or not the value was changed. If you were
implementing this function manually, you must now return `true` if the
value was overwritten and `false` if the value was not.
# Objective
- The tick access methods mention "ticks" (as in: plural). Yet, most of
them only access a single tick.
## Solution
- Rename those methods and fix docs to reflect the singular aspect of
the return values
---
## Migration Guide
The following method names were renamed, from `foo_ticks_bar` to
`foo_tick_bar` (`ticks` is now singular, `tick`):
- `ComponentSparseSet::get_added_ticks` → `get_added_tick`
- `ComponentSparseSet::get_changed_ticks` → `get_changed_tick`
- `Column::get_added_ticks` → `get_added_tick`
- `Column::get_changed_ticks` → `get_changed_tick`
- `Column::get_added_ticks_unchecked` → `get_added_tick_unchecked`
- `Column::get_changed_ticks_unchecked` → `get_changed_tick_unchecked`
# Objective
- Make it possible to snapshot/save states
- Useful for re-using parts of the state system for rollback safe states
- Or to save states with scenes/savegames
## Solution
- Conditionally add the derive if the `bevy_reflect` is enabled
---
## Changelog
- `NextState<S>` and `State<S>` now implement `Reflect` as long as `S`
does.
# Objective
- Fixes#9683
## Solution
- Moved `get_component` from `Query` to `QueryState`.
- Moved `get_component_unchecked_mut` from `Query` to `QueryState`.
- Moved `QueryComponentError` from `bevy_ecs::system` to
`bevy_ecs::query`. Minor Breaking Change.
- Narrowed scope of `unsafe` blocks in `Query` methods.
---
## Migration Guide
- `use bevy_ecs::system::QueryComponentError;` -> `use
bevy_ecs::query::QueryComponentError;`
## Notes
I am not very familiar with unsafe Rust nor its use within Bevy, so I
may have committed a Rust faux pas during the migration.
---------
Co-authored-by: Zac Harrold <zharrold@c5prosolutions.com>
Co-authored-by: Tristan Guichaoua <33934311+tguichaoua@users.noreply.github.com>
# Objective
- Fixes#9244.
## Solution
- Changed the `(Into)SystemSetConfigs` traits and structs be more like
the `(Into)SystemConfigs` traits and structs.
- Replaced uses of `IntoSystemSetConfig` with `IntoSystemSetConfigs`
- Added generic `ItemConfig` and `ItemConfigs` types.
- Changed `SystemConfig(s)` and `SystemSetConfig(s)` to be type aliases
to `ItemConfig(s)`.
- Added generic `process_configs` to `ScheduleGraph`.
- Changed `configure_sets_inner` and `add_systems_inner` to reuse
`process_configs`.
---
## Changelog
- Added `run_if` to `IntoSystemSetConfigs`
- Deprecated `Schedule::configure_set` and `App::configure_set`
- Removed `IntoSystemSetConfig`
## Migration Guide
- Use `App::configure_sets` instead of `App::configure_set`
- Use `Schedule::configure_sets` instead of `Schedule::configure_set`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Currently we don't have panicking alternative for getting components
from `Query` like for resources. Partially addresses #9443.
## Solution
- Add these functions.
---
## Changelog
### Added
- `Query::component` and `Query::component_mut` to get specific
component from query and panic on error.
# Objective
`QueryState::is_empty` is unsound, as it does not validate the world. If
a mismatched world is passed in, then the query filter may cast a
component to an incorrect type, causing undefined behavior.
## Solution
Add world validation. To prevent a performance regression in `Query`
(whose world does not need to be validated), the unchecked function
`is_empty_unsafe_world_cell` has been added. This also allows us to
remove one of the last usages of the private function
`UnsafeWorldCell::unsafe_world`, which takes us a step towards being
able to remove that method entirely.
# Objective
- Fixes#9641
- Anonymous sets are named by their system members. When
`ScheduleBuildSettings::report_sets` is on, systems are named by their
sets. So when getting the anonymous set name this would cause an
infinite recursion.
## Solution
- When getting the anonymous system set name, don't get their system's
names with the sets the systems belong to.
## Other Possible solutions
- An alternate solution might be to skip anonymous sets when getting the
system's name for an anonymous set's name.
# Objective
- I broke ambiguity reporting in one of my refactors.
`conflicts_to_string` should have been using the passed in parameter
rather than the one stored on self.
# Objective
- The current `EventReader::iter` has been determined to cause confusion
among new Bevy users. It was suggested by @JoJoJet to rename the method
to better clarify its usage.
- Solves #9624
## Solution
- Rename `EventReader::iter` to `EventReader::read`.
- Rename `EventReader::iter_with_id` to `EventReader::read_with_id`.
- Rename `ManualEventReader::iter` to `ManualEventReader::read`.
- Rename `ManualEventReader::iter_with_id` to
`ManualEventReader::read_with_id`.
---
## Changelog
- `EventReader::iter` has been renamed to `EventReader::read`.
- `EventReader::iter_with_id` has been renamed to
`EventReader::read_with_id`.
- `ManualEventReader::iter` has been renamed to
`ManualEventReader::read`.
- `ManualEventReader::iter_with_id` has been renamed to
`ManualEventReader::read_with_id`.
- Deprecated `EventReader::iter`
- Deprecated `EventReader::iter_with_id`
- Deprecated `ManualEventReader::iter`
- Deprecated `ManualEventReader::iter_with_id`
## Migration Guide
- Existing usages of `EventReader::iter` and `EventReader::iter_with_id`
will have to be changed to `EventReader::read` and
`EventReader::read_with_id` respectively.
- Existing usages of `ManualEventReader::iter` and
`ManualEventReader::iter_with_id` will have to be changed to
`ManualEventReader::read` and `ManualEventReader::read_with_id`
respectively.
# Objective
The latest `clippy` release has a much more aggressive application of
the
[`explicit_iter_loop`](https://rust-lang.github.io/rust-clippy/master/index.html#/explicit_into_iter_loop?groups=pedantic)
pedantic lint.
As a result, clippy now suggests the following:
```diff
-for event in events.iter() {
+for event in &mut events {
```
I'm generally in favor of this lint. Using `for mut item in &mut query`
is also recommended over `for mut item in query.iter_mut()` for good
reasons IMO.
But, it is my personal belief that `&mut events` is much less clear than
`events.iter()`.
Why? The reason is that the events from `EventReader` **are not
mutable**, they are immutable references to each event in the event
reader. `&mut events` suggests we are getting mutable access to events —
similarly to `&mut query` — which is not the case. Using `&mut events`
is therefore misleading.
`IntoIterator` requires a mutable `EventReader` because it updates the
internal `last_event_count`, not because it let you mutate it.
So clippy's suggested improvement is a downgrade.
## Solution
Do not implement `IntoIterator` for `&mut events`.
Without the impl, clippy won't suggest its "fix". This also prevents
generally people from using `&mut events` for iterating `EventReader`s,
which makes the ecosystem every-so-slightly better.
---
## Changelog
- Removed `IntoIterator` impl for `&mut EventReader`
## Migration Guide
- `&mut EventReader` does not implement `IntoIterator` anymore. replace
`for foo in &mut events` by `for foo in events.iter()`
# Objective
- Some of the old ambiguity tests didn't get ported over during schedule
v3.
## Solution
- Port over tests from
15ee98db8d/crates/bevy_ecs/src/schedule/ambiguity_detection.rs (L279-L612)
with minimal changes
- Make a method to convert the ambiguity conflicts to a string for
easier verification of correct results.
# Objective
Fix#4278Fix#5504Fix#9422
Provide safe ways to borrow an entire entity, while allowing disjoint
mutable access. `EntityRef` and `EntityMut` are not suitable for this,
since they provide access to the entire world -- they are just helper
types for working with `&World`/`&mut World`.
This has potential uses for reflection and serialization
## Solution
Remove `EntityRef::world`, which allows it to soundly be used within
queries.
`EntityMut` no longer supports structural world mutations, which allows
multiple instances of it to exist for different entities at once.
Structural world mutations are performed using the new type
`EntityWorldMut`.
```rust
fn disjoint_system(
q2: Query<&mut A>,
q1: Query<EntityMut, Without<A>>,
) { ... }
let [entity1, entity2] = world.many_entities_mut([id1, id2]);
*entity1.get_mut::<T>().unwrap() = *entity2.get().unwrap();
for entity in world.iter_entities_mut() {
...
}
```
---
## Changelog
- Removed `EntityRef::world`, to fix a soundness issue with queries.
+ Removed the ability to structurally mutate the world using
`EntityMut`, which allows it to be used in queries.
+ Added `EntityWorldMut`, which is used to perform structural mutations
that are no longer allowed using `EntityMut`.
## Migration Guide
**Note for maintainers: ensure that the guide for #9604 is updated
accordingly.**
Removed the method `EntityRef::world`, to fix a soundness issue with
queries. If you need access to `&World` while using an `EntityRef`,
consider passing the world as a separate parameter.
`EntityMut` can no longer perform 'structural' world mutations, such as
adding or removing components, or despawning the entity. Additionally,
`EntityMut::world`, `EntityMut::world_mut` , and
`EntityMut::world_scope` have been removed.
Instead, use the newly-added type `EntityWorldMut`, which is a helper
type for working with `&mut World`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Move schedule name into `Schedule` to allow the schedule name to be
used for errors and tracing in Schedule methods
- Fixes#9510
## Solution
- Move label onto `Schedule` and adjust api's on `World` and `Schedule`
to not pass explicit label where it makes sense to.
- add name to errors and tracing.
- `Schedule::new` now takes a label so either add the label or use
`Schedule::default` which uses a default label. `default` is mostly used
in doc examples and tests.
---
## Changelog
- move label onto `Schedule` to improve error message and logging for
schedules.
## Migration Guide
`Schedule::new` and `App::add_schedule`
```rust
// old
let schedule = Schedule::new();
app.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
app.add_schedule(schedule);
```
if you aren't using a label and are using the schedule struct directly
you can use the default constructor.
```rust
// old
let schedule = Schedule::new();
schedule.run(world);
// new
let schedule = Schedule::default();
schedule.run(world);
```
`Schedules:insert`
```rust
// old
let schedule = Schedule::new();
schedules.insert(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
schedules.insert(schedule);
```
`World::add_schedule`
```rust
// old
let schedule = Schedule::new();
world.add_schedule(MyLabel, schedule);
// new
let schedule = Schedule::new(MyLabel);
world.add_schedule(schedule);
```
# Objective
Every frame, `Events::update` gets called, which clears out any old
events from the buffer. There should be a way of taking ownership of
these old events instead of throwing them away. My use-case is dumping
old events into a debug menu so they can be inspected later.
One potential workaround is to just have a system that clones any
incoming events and stores them in a list -- however, this requires the
events to implement `Clone`.
## Solution
Add `Events::update_drain`, which returns an iterator of the events that
were removed from the buffer.
# Objective
- Fixes: #9508
- Fixes: #9526
## Solution
- Adds
```rust
fn configure_schedules(&mut self, schedule_build_settings: ScheduleBuildSettings)
```
to `Schedules`, and `App` to simplify applying `ScheduleBuildSettings`
to all schedules.
---
## Migration Guide
- No breaking changes.
- Adds `Schedule::get_build_settings()` getter for the schedule's
`ScheduleBuildSettings`.
- Can replaced manual configuration of all schedules:
```rust
// Old
for (_, schedule) in app.world.resource_mut::<Schedules>().iter_mut() {
schedule.set_build_settings(build_settings);
}
// New
app.configure_schedules(build_settings);
```
# Objective
To enable non exclusive system usage of reflected components and make
reflection more ergonomic to use by making it more in line with standard
entity commands.
## Solution
- Implements a new `EntityCommands` extension trait for reflection
related functions in the reflect module of bevy_ecs.
- Implements 4 new commands, `insert_reflect`,
`insert_reflect_with_registry`, `remove_reflect`, and
`remove_reflect_with_registry`. Both insert commands take a `Box<dyn
Reflect>` component while the remove commands take the component type
name.
- Made `EntityCommands` fields pub(crate) to allow access in the reflect
module. (Might be worth making these just public to enable user end
custom entity commands in a different pr)
- Added basic tests to ensure the commands are actually working.
- Documentation of functions.
---
## Changelog
Added:
- Implements 4 new commands on the new entity commands extension.
- `insert_reflect`
- `remove_reflect`
- `insert_reflect_with_registry`
- `remove_reflect_with_registry`
The commands operate the same except the with_registry commands take a
generic parameter for a resource that implements `AsRef<TypeRegistry>`.
Otherwise the default commands use the `AppTypeRegistry` for reflection
data.
Changed:
- Made `EntityCommands` fields pub(crate) to allow access in the reflect
module.
> Hopefully this time it works. Please don't make me rebase again ☹
# Objective
- Fixes#4917
- Replaces #9602
## Solution
- Replaced `EntityCommand` implementation for `FnOnce` to apply to
`FnOnce(EntityMut)` instead of `FnOnce(Entity, &mut World)`
---
## Changelog
- `FnOnce(Entity, &mut World)` no longer implements `EntityCommand`.
This is a breaking change.
## Migration Guide
### 1. New-Type `FnOnce`
Create an `EntityCommand` type which implements the method you
previously wrote:
```rust
pub struct ClassicEntityCommand<F>(pub F);
impl<F> EntityCommand for ClassicEntityCommand<F>
where
F: FnOnce(Entity, &mut World) + Send + 'static,
{
fn apply(self, id: Entity, world: &mut World) {
(self.0)(id, world);
}
}
commands.add(ClassicEntityCommand(|id: Entity, world: &mut World| {
/* ... */
}));
```
### 2. Extract `(Entity, &mut World)` from `EntityMut`
The method `into_world_mut` can be used to gain access to the `World`
from an `EntityMut`.
```rust
let old = |id: Entity, world: &mut World| {
/* ... */
};
let new = |mut entity: EntityMut| {
let id = entity.id();
let world = entity.into_world_mut();
/* ... */
};
```
# Objective
The name `ManualEventIterator` is long and unnecessary, as this is the
iterator type used for both `EventReader` and `ManualEventReader`.
## Solution
Rename `ManualEventIterator` to `EventIterator`. To ease migration, add
a deprecated type alias with the old name.
---
## Changelog
- The types `ManualEventIterator{WithId}` have been renamed to
`EventIterator{WithId}`.
## Migration Guide
The type `ManualEventIterator` has been renamed to `EventIterator`.
Additonally, `ManualEventIteratorWithId` has been renamed to
`EventIteratorWithId`.
# Objective
#5483 allows for the creation of non-`Sync` locals. However, it's not
actually possible to use these types as there is a `Sync` bound on the
`Deref` impls.
## Solution
Remove the unnecessary bounds.
# Objective
- have errors in configure_set and configure_sets show the line number
of the user calling location rather than pointing to schedule.rs
- use display formatting for the errors
## Example Error Text
```text
// dependency loop
// before
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: DependencyLoop("A")', crates\bevy_ecs\src\schedule\schedule.rs:682:39
// after
thread 'main' panicked at 'System set `A` depends on itself.', examples/stress_tests/bevymark.rs:16:9
// hierarchy loop
// before
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: HierarchyLoop("A")', crates\bevy_ecs\src\schedule\schedule.rs:682:3
// after
thread 'main' panicked at 'System set `A` contains itself.', examples/stress_tests/bevymark.rs:16:9
// configuring a system type set
// before
thread 'main' panicked at 'configuring system type sets is not allowed', crates\bevy_ecs\src\schedule\config.rs:394:9
//after
thread 'main' panicked at 'configuring system type sets is not allowed', examples/stress_tests/bevymark.rs:16:9
```
Code to produce errors:
```rust
use bevy::prelude::*;
#[derive(SystemSet, Clone, Debug, PartialEq, Eq, Hash)]
enum TestSet {
A,
}
fn main() {
fn foo() {}
let mut app = App::empty();
// Hierarchy Loop
app.configure_set(Main, TestSet::A.in_set(TestSet::A));
// Dependency Loop
app.configure_set(Main, TestSet::A.after(TestSet::A));
// Configure System Type Set
app.configure_set(Main, foo.into_system_set());
}
```
# Objective
- Fixes#9321
## Solution
- `EntityMap` has been replaced by a simple `HashMap<Entity, Entity>`.
---
## Changelog
- `EntityMap::world_scope` has been replaced with `World::world_scope`
to avoid creating a new trait. This is a public facing change to the
call semantics, but has no effect on results or behaviour.
- `EntityMap`, as a `HashMap`, now operates on `&Entity` rather than
`Entity`. This changes many standard access functions (e.g, `.get`) in a
public-facing way.
## Migration Guide
- Calls to `EntityMap::world_scope` can be directly replaced with the
following:
`map.world_scope(&mut world)` -> `world.world_scope(&mut map)`
- Calls to legacy `EntityMap` methods such as `EntityMap::get` must
explicitly include de/reference symbols:
`let entity = map.get(parent);` -> `let &entity = map.get(&parent);`
# Objective
Make code relating to event more readable.
Currently the `impl` block of `Events` is split in two, and the big part
of its implementations are put at the end of the file, far from the
definition of the `struct`.
## Solution
- Move and merge the `impl` blocks of `Events` next to its definition.
- Move the `EventSequence` definition and implementations before the
`Events`, because they're pretty trivial and help understand how
`Events` work, rather than being buried bellow `Events`.
I separated those two steps in two commits to not be too confusing. I
didn't modify any code of documentation. I want to do a second PR with
such modifications after this one is merged.
# Objective
Similar to #6344, but contains only `ReflectBundle` changes. Useful for
scripting. The implementation has also been updated to look exactly like
`ReflectComponent`.
---
## Changelog
### Added
- Reflection for bundles.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Any time we wish to transform the output of a system, we currently use
system piping to do so:
```rust
my_system.pipe(|In(x)| do_something(x))
```
Unfortunately, system piping is not a zero cost abstraction. Each call
to `.pipe` requires allocating two extra access sets: one for the second
system and one for the combined accesses of both systems. This also adds
extra work to each call to `update_archetype_component_access`, which
stacks as one adds multiple layers of system piping.
## Solution
Add the `AdapterSystem` abstraction: similar to `CombinatorSystem`, this
allows you to implement a trait to generically control how a system is
run and how its inputs and outputs are processed. Unlike
`CombinatorSystem`, this does not have any overhead when computing world
accesses which makes it ideal for simple operations such as inverting or
ignoring the output of a system.
Add the extension method `.map(...)`: this is similar to `.pipe(...)`,
only it accepts a closure as an argument instead of an `In<T>` system.
```rust
my_system.map(do_something)
```
This has the added benefit of making system names less messy: a system
that ignores its output will just be called `my_system`, instead of
`Pipe(my_system, ignore)`
---
## Changelog
TODO
## Migration Guide
The `system_adapter` functions have been deprecated: use `.map` instead,
which is a lightweight alternative to `.pipe`.
```rust
// Before:
my_system.pipe(system_adapter::ignore)
my_system.pipe(system_adapter::unwrap)
my_system.pipe(system_adapter::new(T::from))
// After:
my_system.map(std::mem::drop)
my_system.map(Result::unwrap)
my_system.map(T::from)
// Before:
my_system.pipe(system_adapter::info)
my_system.pipe(system_adapter::dbg)
my_system.pipe(system_adapter::warn)
my_system.pipe(system_adapter::error)
// After:
my_system.map(bevy_utils::info)
my_system.map(bevy_utils::dbg)
my_system.map(bevy_utils::warn)
my_system.map(bevy_utils::error)
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- break up large build_schedule system to make it easier to read
- Clean up related error messages.
- I have a follow up PR that adds the schedule name to the error
messages, but wanted to break this up from that.
## Changelog
- refactor `build_schedule` to be easier to read
## Sample Error Messages
Dependency Cycle
```text
thread 'main' panicked at 'System dependencies contain cycle(s).
schedule has 1 before/after cycle(s):
cycle 1: system set 'A' must run before itself
system set 'A'
... which must run before system set 'B'
... which must run before system set 'A'
', crates\bevy_ecs\src\schedule\schedule.rs:228:13
```
```text
thread 'main' panicked at 'System dependencies contain cycle(s).
schedule has 1 before/after cycle(s):
cycle 1: system 'foo' must run before itself
system 'foo'
... which must run before system 'bar'
... which must run before system 'foo'
', crates\bevy_ecs\src\schedule\schedule.rs:228:13
```
Hierarchy Cycle
```text
thread 'main' panicked at 'System set hierarchy contains cycle(s).
schedule has 1 in_set cycle(s):
cycle 1: set 'A' contains itself
set 'A'
... which contains set 'B'
... which contains set 'A'
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
System Type Set
```text
thread 'main' panicked at 'Tried to order against `SystemTypeSet(fn foo())` in a schedule that has more than one `SystemTypeSet(fn foo())` instance. `SystemTypeSet(fn foo())` is a `SystemTypeSet` and cannot be used for ordering if ambiguous. Use a different set without this restriction.', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Hierarchy Redundancy
```text
thread 'main' panicked at 'System set hierarchy contains redundant edges.
hierarchy contains redundant edge(s) -- system set 'X' cannot be child of set 'A', longer path exists
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Systems have ordering but interset
```text
thread 'main' panicked at '`A` and `C` have a `before`-`after` relationship (which may be transitive) but share systems.', crates\bevy_ecs\src\schedule\schedule.rs:227:51
```
Cross Dependency
```text
thread 'main' panicked at '`A` and `B` have both `in_set` and `before`-`after` relationships (these might be transitive). This combination is unsolvable as a system cannot run before or after a set it belongs to.', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Ambiguity
```text
thread 'main' panicked at 'Systems with conflicting access have indeterminate run order.
1 pairs of systems with conflicting data access have indeterminate execution order. Consider adding `before`, `after`, or `ambiguous_with` relationships between these:
-- res_mut and res_ref
conflict on: ["bevymark::ambiguity::X"]
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
# Objective
Sometimes you want to create a plugin with a custom run condition. In a
function, you take the `Condition` trait and then make a
`BoxedCondition` from it to store it. And then you want to add that
condition to a system, but you can't, because there is only the `run_if`
function available which takes `impl Condition<M>` instead of
`BoxedCondition`. So you have to create a wrapper type for the
`BoxedCondition` and implement the `System` and `ReadOnlySystem` traits
for the wrapper (Like it's done in the picture below). It's very
inconvenient and boilerplate. But there is an easy solution for that:
make the `run_if_inner` system that takes a `BoxedCondition` public.
Also, it makes sense to make `in_set_inner` function public as well with
the same motivation.
A chunk of the source code of the `bevy-inspector-egui` crate.
## Solution
Make `run_if_inner` function public.
Rename `run_if_inner` to `run_if_dyn`.
Make `in_set_inner` function public.
Rename `in_set_inner` to `in_set_dyn`.
## Changelog
Changed visibility of `run_if_inner` from `pub(crate)` to `pub`.
Renamed `run_if_inner` to `run_if_dyn`.
Changed visibility of `in_set_inner` from `pub(crate)` to `pub`.
Renamed `in_set_inner` to `in_set_dyn`.
## Migration Guide
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
* `Local` and `SystemName` implement `Debug` manually, but they could
derive it.
* `QueryState` and `dyn System` have unconventional debug formatting.
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
While being nobody other's issue as far I can tell, I want to create a
trait I plan to implement on `App` where more than one schedule is
modified.
My workaround so far was working with a closure that returns an
`ExecutorKind` from a match of the method variable.
It makes it easier for me to being able to clone `ExecutorKind` and I
don't see this being controversial for others working with Bevy.
I did nothing more than adding `Clone` to the derived traits, no
migration guide needed.
(If this worked out then the GitHub editor is not too shabby.)
# Objective
Just like
[`set_if_neq`](https://docs.rs/bevy_ecs/latest/bevy_ecs/change_detection/trait.DetectChangesMut.html#method.set_if_neq),
being able to express the "I don't want to unnecessarily trigger the
change detection" but with the ability to handle the previous value if
change occurs.
## Solution
Add `replace_if_neq` to `DetectChangesMut`.
---
## Changelog
- Added `DetectChangesMut::replace_if_neq`: like `set_if_neq` change the
value only if the new value if different from the current one, but
return the previous value if the change occurs.
Add a `RunSystem` extension trait to allow for immediate execution of
systems on a `World` for debugging and/or testing purposes.
# Objective
Fixes#6184
Initially, I made this CL as `ApplyCommands`. After a discussion with
@cart , we decided a more generic implementation would be better to
support all systems. This is the new revised CL. Sorry for the long
delay! 😅
This CL allows users to do this:
```rust
use bevy::prelude::*;
use bevy::ecs::system::RunSystem;
struct T(usize);
impl Resource for T {}
fn system(In(n): In<usize>, mut commands: Commands) -> usize {
commands.insert_resource(T(n));
n + 1
}
let mut world = World::default();
let n = world.run_system_with(1, system);
assert_eq!(n, 2);
assert_eq!(world.resource::<T>().0, 1);
```
## Solution
This is implemented as a trait extension and not included in any
preludes to ensure it's being used consciously.
Internally, it just initializes and runs a systems, and applies any
deferred parameters all "in place".
The trait has 2 functions (one of which calls the other by default):
- `run_system_with` is the general implementation, which allows user to
pass system input parameters
- `run_system` is the ergonomic wrapper for systems with no input
parameter (to avoid having the user pass `()` as input).
~~Additionally, this trait is also implemented for `&mut App`. I added
this mainly for ergonomics (`app.run_system` vs.
`app.world.run_system`).~~ (Removed based on feedback)
---------
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
- Fixes#9114
## Solution
Inside `ScheduleGraph::build_schedule()` the variable `node_count =
self.systems.len() + self.system_sets.len()` is used to calculate the
indices for the `reachable` bitset derived from `self.hierarchy.graph`.
However, the number of nodes inside `self.hierarchy.graph` does not
always correspond to `self.systems.len() + self.system_sets.len()` when
`ambiguous_with` is used, because an ambiguous set is added to
`system_sets` (because we need an `NodeId` for the ambiguity graph)
without adding a node to `self.hierarchy`.
In this PR, we rename `node_count` to the more descriptive name
`hg_node_count` and set it to `self.hierarchy.graph.node_count()`.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
Fixes#9113
## Solution
disable `multi-threaded` default feature
## Migration Guide
The `multi-threaded` feature in `bevy_ecs` and `bevy_tasks` is no longer
enabled by default. However, this remains a default feature for the
umbrella `bevy` crate. If you depend on `bevy_ecs` or `bevy_tasks`
directly, you should consider enabling this to allow systems to run in
parallel.
# Objective
The `lifetimeless` module has been a source of confusion for bevy users
for a while now.
## Solution
Add a couple paragraph explaining that, yes, you can use one of the type
alias safely, without ever leaking any memory.
# Objective
Cloning a `WorldQuery` type's "fetch" struct was made unsafe in #5593,
by adding the `unsafe fn clone_fetch` to `WorldQuery`. However, as that
method's documentation explains, it is not the right place to put the
safety invariant:
> While calling this method on its own cannot cause UB it is marked
`unsafe` as the caller must ensure that the returned value is not used
in any way that would cause two `QueryItem<Self>` for the same
`archetype_index` or `table_row` to be alive at the same time.
You can clone a fetch struct all you want and it will never cause
undefined behavior -- in order for something to go wrong, you need to
improperly call `WorldQuery::fetch` with it (which is marked unsafe).
Additionally, making it unsafe to clone a fetch struct does not even
prevent undefined behavior, since there are other ways to incorrectly
use a fetch struct. For example, you could just call fetch more than
once for the same entity, which is not currently forbidden by any
documented invariants.
## Solution
Document a safety invariant on `WorldQuery::fetch` that requires the
caller to not create aliased `WorldQueryItem`s for mutable types. Remove
the `clone_fetch` function, and add the bound `Fetch: Clone` instead.
---
## Changelog
- Removed the associated function `WorldQuery::clone_fetch`, and added a
`Clone` bound to `WorldQuery::Fetch`.
## Migration Guide
### `fetch` invariants
The function `WorldQuery::fetch` has had the following safety invariant
added:
> If this type does not implement `ReadOnlyWorldQuery`, then the caller
must ensure that it is impossible for more than one `Self::Item` to
exist for the same entity at any given time.
This invariant was always required for soundness, but was previously
undocumented. If you called this function manually anywhere, you should
check to make sure that this invariant is not violated.
### Removed `clone_fetch`
The function `WorldQuery::clone_fetch` has been removed. The associated
type `WorldQuery::Fetch` now has the bound `Clone`.
Before:
```rust
struct MyFetch<'w> { ... }
unsafe impl WorldQuery for MyQuery {
...
type Fetch<'w> = MyFetch<'w>
unsafe fn clone_fetch<'w>(fetch: &Self::Fetch<'w>) -> Self::Fetch<'w> {
MyFetch {
field1: fetch.field1,
field2: fetch.field2.clone(),
...
}
}
}
```
After:
```rust
#[derive(Clone)]
struct MyFetch<'w> { ... }
unsafe impl WorldQuery for MyQuery {
...
type Fetch<'w> = MyFetch<'w>;
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The `QueryParIter::for_each_mut` function is required when doing
parallel iteration with mutable queries.
This results in an unfortunate stutter:
`query.par_iter_mut().par_for_each_mut()` ('mut' is repeated).
## Solution
- Make `for_each` compatible with mutable queries, and deprecate
`for_each_mut`. In order to prevent `for_each` from being called
multiple times in parallel, we take ownership of the QueryParIter.
---
## Changelog
- `QueryParIter::for_each` is now compatible with mutable queries.
`for_each_mut` has been deprecated as it is now redundant.
## Migration Guide
The method `QueryParIter::for_each_mut` has been deprecated and is no
longer functional. Use `for_each` instead, which now supports mutable
queries.
```rust
// Before:
query.par_iter_mut().for_each_mut(|x| ...);
// After:
query.par_iter_mut().for_each(|x| ...);
```
The method `QueryParIter::for_each` now takes ownership of the
`QueryParIter`, rather than taking a shared reference.
```rust
// Before:
let par_iter = my_query.par_iter().batching_strategy(my_batching_strategy);
par_iter.for_each(|x| {
// ...Do stuff with x...
par_iter.for_each(|y| {
// ...Do nested stuff with y...
});
});
// After:
my_query.par_iter().batching_strategy(my_batching_strategy).for_each(|x| {
// ...Do stuff with x...
my_query.par_iter().batching_strategy(my_batching_strategy).for_each(|y| {
// ...Do nested stuff with y...
});
});
```
### **Adopted #6430**
# Objective
`MutUntyped` is the untyped variant of `Mut<T>` that stores a `PtrMut`
instead of a `&mut T`. Working with a `MutUntyped` is a bit annoying,
because as soon you want to use the ptr e.g. as a `&mut dyn Reflect` you
cannot use a type like `Mut<dyn Reflect>` but instead need to carry
around a `&mut dyn Reflect` and a `impl FnMut()` to mark the value as
changed.
## Solution
* Provide a method `map_unchanged` to turn a `MutUntyped` into a
`Mut<T>` by mapping the `PtrMut<'a>` to a `&'a mut T`
This can be used like this:
```rust
// SAFETY: ptr is of type `u8`
let val: Mut<u8> = mut_untyped.map_unchanged(|ptr| unsafe { ptr.deref_mut::<u8>() });
// SAFETY: from the context it is known that `ReflectFromPtr` was made for the type of the `MutUntyped`
let val: Mut<dyn Reflect> = mut_untyped.map_unchanged(|ptr| unsafe { reflect_from_ptr.as_reflect_ptr_mut(ptr) });
```
Note that nothing prevents you from doing
```rust
mut_untyped.map_unchanged(|ptr| &mut ());
```
or using any other mutable reference you can get, but IMO that is fine
since that will only result in a `Mut` that will dereference to that
value and mark the original value as changed. The lifetimes here prevent
anything bad from happening.
## Alternatives
1. Make `Ticks` public and provide a method to get construct a `Mut`
from `Ticks` and `&mut T`. More powerful and more easy to misuse.
2. Do nothing. People can still do everything they want, but they need
to pass (`&mut dyn Reflect, impl FnMut() + '_)` around instead of
`Mut<dyn Reflect>`
## Changelog
- add `MutUntyped::map_unchanged` to turn a `MutUntyped` into its typed
counterpart
---------
Co-authored-by: Jakob Hellermann <jakob.hellermann@protonmail.com>
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
Fixes#9200
Switches ()'s to []'s when talking about the optional `_mut` suffix in
the ECS Query Struct page to have more idiomatic docs.
## Solution
Replace `()` with `[]` in appropriate doc pages.
CI-capable version of #9086
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix typos throughout the project.
## Solution
[`typos`](https://github.com/crate-ci/typos) project was used for
scanning, but no automatic corrections were applied. I checked
everything by hand before fixing.
Most of the changes are documentation/comments corrections. Also, there
are few trivial changes to code (variable name, pub(crate) function name
and a few error/panic messages).
## Unsolved
`bevy_reflect_derive` has
[typo](1b51053f19/crates/bevy_reflect/bevy_reflect_derive/src/type_path.rs (L76))
in enum variant name that I didn't fix. Enum is `pub(crate)`, so there
shouldn't be any trouble if fixed. However, code is tightly coupled with
macro usage, so I decided to leave it for more experienced contributor
just in case.
I created this manually as Github didn't want to run CI for the
workflow-generated PR. I'm guessing we didn't hit this in previous
releases because we used bors.
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
# Objective
Fixes#6689.
## Solution
Add `single-threaded` as an optional non-default feature to `bevy_ecs`
and `bevy_tasks` that:
- disable the `ParallelExecutor` as a default runner
- disables the multi-threaded `TaskPool`
- internally replace `QueryParIter::for_each` calls with
`Query::for_each`.
Removed the `Mutex` and `Arc` usage in the single-threaded task pool.
## Future Work/TODO
Create type aliases for `Mutex`, `Arc` that change to single-threaaded
equivalents where possible.
---
## Changelog
Added: Optional default feature `multi-theaded` to that enables
multithreaded parallelism in the engine. Disabling it disables all
multithreading in exchange for higher single threaded performance. Does
nothing on WASM targets.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Remove need to call `.get()` on two ticks to compare them for
equality.
## Solution
- Derive `Eq` and `PartialEq`.
---
## Changelog
> `Tick` now implements `Eq` and `PartialEq`
# Objective
**This implementation is based on
https://github.com/bevyengine/rfcs/pull/59.**
---
Resolves#4597
Full details and motivation can be found in the RFC, but here's a brief
summary.
`FromReflect` is a very powerful and important trait within the
reflection API. It allows Dynamic types (e.g., `DynamicList`, etc.) to
be formed into Real ones (e.g., `Vec<i32>`, etc.).
This mainly comes into play concerning deserialization, where the
reflection deserializers both return a `Box<dyn Reflect>` that almost
always contain one of these Dynamic representations of a Real type. To
convert this to our Real type, we need to use `FromReflect`.
It also sneaks up in other ways. For example, it's a required bound for
`T` in `Vec<T>` so that `Vec<T>` as a whole can be made `FromReflect`.
It's also required by all fields of an enum as it's used as part of the
`Reflect::apply` implementation.
So in other words, much like `GetTypeRegistration` and `Typed`, it is
very much a core reflection trait.
The problem is that it is not currently treated like a core trait and is
not automatically derived alongside `Reflect`. This makes using it a bit
cumbersome and easy to forget.
## Solution
Automatically derive `FromReflect` when deriving `Reflect`.
Users can then choose to opt-out if needed using the
`#[reflect(from_reflect = false)]` attribute.
```rust
#[derive(Reflect)]
struct Foo;
#[derive(Reflect)]
#[reflect(from_reflect = false)]
struct Bar;
fn test<T: FromReflect>(value: T) {}
test(Foo); // <-- OK
test(Bar); // <-- Panic! Bar does not implement trait `FromReflect`
```
#### `ReflectFromReflect`
This PR also automatically adds the `ReflectFromReflect` (introduced in
#6245) registration to the derived `GetTypeRegistration` impl— if the
type hasn't opted out of `FromReflect` of course.
<details>
<summary><h4>Improved Deserialization</h4></summary>
> **Warning**
> This section includes changes that have since been descoped from this
PR. They will likely be implemented again in a followup PR. I am mainly
leaving these details in for archival purposes, as well as for reference
when implementing this logic again.
And since we can do all the above, we might as well improve
deserialization. We can now choose to deserialize into a Dynamic type or
automatically convert it using `FromReflect` under the hood.
`[Un]TypedReflectDeserializer::new` will now perform the conversion and
return the `Box`'d Real type.
`[Un]TypedReflectDeserializer::new_dynamic` will work like what we have
now and simply return the `Box`'d Dynamic type.
```rust
// Returns the Real type
let reflect_deserializer = UntypedReflectDeserializer::new(®istry);
let mut deserializer = ron:🇩🇪:Deserializer::from_str(input)?;
let output: SomeStruct = reflect_deserializer.deserialize(&mut deserializer)?.take()?;
// Returns the Dynamic type
let reflect_deserializer = UntypedReflectDeserializer::new_dynamic(®istry);
let mut deserializer = ron:🇩🇪:Deserializer::from_str(input)?;
let output: DynamicStruct = reflect_deserializer.deserialize(&mut deserializer)?.take()?;
```
</details>
---
## Changelog
* `FromReflect` is now automatically derived within the `Reflect` derive
macro
* This includes auto-registering `ReflectFromReflect` in the derived
`GetTypeRegistration` impl
* ~~Renamed `TypedReflectDeserializer::new` and
`UntypedReflectDeserializer::new` to
`TypedReflectDeserializer::new_dynamic` and
`UntypedReflectDeserializer::new_dynamic`, respectively~~ **Descoped**
* ~~Changed `TypedReflectDeserializer::new` and
`UntypedReflectDeserializer::new` to automatically convert the
deserialized output using `FromReflect`~~ **Descoped**
## Migration Guide
* `FromReflect` is now automatically derived within the `Reflect` derive
macro. Items with both derives will need to remove the `FromReflect`
one.
```rust
// OLD
#[derive(Reflect, FromReflect)]
struct Foo;
// NEW
#[derive(Reflect)]
struct Foo;
```
If using a manual implementation of `FromReflect` and the `Reflect`
derive, users will need to opt-out of the automatic implementation.
```rust
// OLD
#[derive(Reflect)]
struct Foo;
impl FromReflect for Foo {/* ... */}
// NEW
#[derive(Reflect)]
#[reflect(from_reflect = false)]
struct Foo;
impl FromReflect for Foo {/* ... */}
```
<details>
<summary><h4>Removed Migrations</h4></summary>
> **Warning**
> This section includes changes that have since been descoped from this
PR. They will likely be implemented again in a followup PR. I am mainly
leaving these details in for archival purposes, as well as for reference
when implementing this logic again.
* The reflect deserializers now perform a `FromReflect` conversion
internally. The expected output of `TypedReflectDeserializer::new` and
`UntypedReflectDeserializer::new` is no longer a Dynamic (e.g.,
`DynamicList`), but its Real counterpart (e.g., `Vec<i32>`).
```rust
let reflect_deserializer =
UntypedReflectDeserializer::new_dynamic(®istry);
let mut deserializer = ron:🇩🇪:Deserializer::from_str(input)?;
// OLD
let output: DynamicStruct = reflect_deserializer.deserialize(&mut
deserializer)?.take()?;
// NEW
let output: SomeStruct = reflect_deserializer.deserialize(&mut
deserializer)?.take()?;
```
Alternatively, if this behavior isn't desired, use the
`TypedReflectDeserializer::new_dynamic` and
`UntypedReflectDeserializer::new_dynamic` methods instead:
```rust
// OLD
let reflect_deserializer = UntypedReflectDeserializer::new(®istry);
// NEW
let reflect_deserializer =
UntypedReflectDeserializer::new_dynamic(®istry);
```
</details>
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Title. This is necessary in order to update
[`bevy-trait-query`](https://crates.io/crates/bevy-trait-query) to Bevy
0.11.
---
## Changelog
Added the unsafe function `UnsafeWorldCell::storages`, which provides
unchecked access to the internal data stores of a `World`.
# Objective
`World::entity`, `World::entity_mut` and `Commands::entity` should be
marked with `track_caller` to display where (in user code) the call with
the invalid `Entity` was made. `Commands::entity` already has the
attibute, but it does nothing due to the call to `unwrap_or_else`.
## Solution
- Apply the `track_caller` attribute to the `World::entity_mut` and
`World::entity`.
- Remove the call to `unwrap_or_else` which makes the `track_caller`
attribute useless (because `unwrap_or_else` is not `track_caller`
itself). The avoid eager evaluation of the panicking branch it is never
inlined.
---------
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
# Objective
Partially address #5504. Fix#4278. Provide "whole entity" access in
queries. This can be useful when you don't know at compile time what
you're accessing (i.e. reflection via `ReflectComponent`).
## Solution
Implement `WorldQuery` for `EntityRef`.
- This provides read-only access to the entire entity, and supports
anything that `EntityRef` can normally do.
- It matches all archetypes and tables and will densely iterate when
possible.
- It marks all of the ArchetypeComponentIds of a matched archetype as
read.
- Adding it to a query will cause it to panic if used in conjunction
with any other mutable access.
- Expanded the docs on Query to advertise this feature.
- Added tests to ensure the panics were working as intended.
- Added `EntityRef` to the ECS prelude.
To make this safe, `EntityRef::world` was removed as it gave potential
`UnsafeCell`-like access to other parts of the `World` including aliased
mutable access to the components it would otherwise read safely.
## Performance
Not great beyond the additional parallelization opportunity over
exclusive systems. The `EntityRef` is fetched from `Entities` like any
other call to `World::entity`, which can be very random access heavy.
This could be simplified if `ArchetypeRow` is available in
`WorldQuery::fetch`'s arguments, but that's likely not something we
should optimize for.
## Future work
An equivalent API where it gives mutable access to all components on a
entity can be done with a scoped version of `EntityMut` where it does
not provide `&mut World` access nor allow for structural changes to the
entity is feasible as well. This could be done as a safe alternative to
exclusive system when structural mutation isn't required or the target
set of entities is scoped.
---
## Changelog
Added: `Access::has_any_write`
Added: `EntityRef` now implements `WorldQuery`. Allows read-only access
to the entire entity, incompatible with any other mutable access, can be
mixed with `With`/`Without` filters for more targeted use.
Added: `EntityRef` to `bevy::ecs::prelude`.
Removed: `EntityRef::world`
## Migration Guide
TODO
---------
Co-authored-by: Carter Weinberg <weinbergcarter@gmail.com>
Co-authored-by: Jakob Hellermann <jakob.hellermann@protonmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Use `AppTypeRegistry` on API defined in `bevy_ecs`
(https://github.com/bevyengine/bevy/pull/8895#discussion_r1234748418)
A lot of the API on `Reflect` depends on a registry. When it comes to
the ECS. We should use `AppTypeRegistry` in the general case.
This is however impossible in `bevy_ecs`, since `AppTypeRegistry` is
defined in `bevy_app`.
## Solution
- Move `AppTypeRegistry` resource definition from `bevy_app` to
`bevy_ecs`
- Still add the resource in the `App` plugin, since bevy_ecs itself
doesn't know of plugins
Note that `bevy_ecs` is a dependency of `bevy_app`, so nothing
revolutionary happens.
## Alternative
- Define the API as a trait in `bevy_app` over `bevy_ecs`. (though this
prevents us from using bevy_ecs internals)
- Do not rely on `AppTypeRegistry` for the API in question, requring
users to extract themselves the resource and pass it to the API methods.
---
## Changelog
- Moved `AppTypeRegistry` resource definition from `bevy_app` to
`bevy_ecs`
## Migration Guide
- If you were **not** using a `prelude::*` to import `AppTypeRegistry`,
you should update your imports:
```diff
- use bevy::app::AppTypeRegistry;
+ use bevy::ecs::reflect::AppTypeRegistry
```
# Objective
`WorldQuery::Fetch` is a type used to optimize the implementation of
queries. These types are hidden and not intended to be outside of the
engine, so there is no need to provide type aliases to make it easier to
refer to them. If a user absolutely needs to refer to one of these
types, they can always just refer to the associated type directly.
## Solution
Deprecate these type aliases.
---
## Changelog
- Deprecated the type aliases `QueryFetch` and `ROQueryFetch`.
## Migration Guide
The type aliases `bevy_ecs::query::QueryFetch` and `ROQueryFetch` have
been deprecated. If you need to refer to a `WorldQuery` struct's fetch
type, refer to the associated type defined on `WorldQuery` directly:
```rust
// Before:
type MyFetch<'w> = QueryFetch<'w, MyQuery>;
type MyFetchReadOnly<'w> = ROQueryFetch<'w, MyQuery>;
// After:
type MyFetch<'w> = <MyQuery as WorldQuery>::Fetch;
type MyFetchReadOnly<'w> = <<MyQuery as WorldQuery>::ReadOnly as WorldQuery>::Fetch;
```
Repetitively fetching ReflectResource and ReflectComponent from the
TypeRegistry is costly.
We want to access the underlying `fn`s. to do so, we expose the
`ReflectResourceFns` and `ReflectComponentFns` stored in ReflectResource
and ReflectComponent.
---
## Changelog
- Add the `fn_pointers` methods to `ReflectResource` and
`ReflectComponent` returning the underlying `ReflectResourceFns` and
`ReflectComponentFns`
# Objective
- Fixes#7811
## Solution
- I added `Has<T>` (and `HasFetch<T>` ) and implemented `WorldQuery`,
`ReadonlyWorldQuery`, and `ArchetypeFilter` it
- I also added documentation with an example and a unit test
I believe I've done everything right but this is my first contribution
and I'm not an ECS expert so someone who is should probably check my
implementation. I based it on what `Or<With<T>,>`, would do. The only
difference is that `Has` does not update component access - adding `Has`
to a query should never affect whether or not it is disjoint with
another query *I think*.
---
## Changelog
## Added
- Added `Has<T>` WorldQuery to find out whether or not an entity has a
particular component.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
# Objective
- Cleanup the `reflect.rs` file in `bevy_ecs`, it's very large and can
get difficult to navigate
## Solution
- Split the file into 3 modules, re-export the types in the
`reflect/mod.rs` to keep a perfectly identical API.
- Add **internal** architecture doc explaining how `ReflectComponent`
works. Note that this doc is internal only, since `component.rs` is not
exposed publicly.
### Tips to reviewers
To review this change properly, you need to compare it to the previous
version of `reflect.rs`. The diff from this PR does not help at all!
What you will need to do is compare `reflect.rs` individually with each
newly created file.
Here is how I did it:
- Adding my fork as remote `git remote add nicopap
https://github.com/nicopap/bevy.git`
- Checkout out the branch `git checkout nicopap/split_ecs_reflect`
- Checkout the old `reflect.rs` by running `git checkout HEAD~1 --
crates/bevy_ecs/src/reflect.rs`
- Compare the old with the new with `git diff --no-index
crates/bevy_ecs/src/reflect.rs crates/bevy_ecs/src/reflect/component.rs`
You could also concatenate everything into a single file and compare
against it:
- `cat
crates/bevy_ecs/src/reflect/{component,resource,map_entities,mod}.rs >
new_reflect.rs`
- `git diff --no-index crates/bevy_ecs/src/reflect.rs new_reflect.rs`
# Objective
Resolves#7558.
Systems that are known to never modify the world implement the trait
`ReadOnlySystem`. This is a perfect place to add a safe API for running
a system with a shared reference to a World.
---
## Changelog
- Added the trait method `ReadOnlySystem::run_readonly`, which allows a
system to be run using `&World`.
# Objective
- The function `QueryParIter::for_each_unchecked` is a footgun: the only
ways to use it soundly can be done in safe code using `for_each` or
`for_each_mut`. See [this discussion on
discord](https://discord.com/channels/691052431525675048/749335865876021248/1118642977275924583).
## Solution
- Make `for_each_unchecked` private.
---
## Changelog
- Removed `QueryParIter::for_each_unchecked`. All use-cases of this
method were either unsound or doable in safe code using `for_each` or
`for_each_mut`.
## Migration Guide
The method `QueryParIter::for_each_unchecked` has been removed -- use
`for_each` or `for_each_mut` instead. If your use case can not be
achieved using either of these, then your code was likely unsound.
If you have a use-case for `for_each_unchecked` that you believe is
sound, please [open an
issue](https://github.com/bevyengine/bevy/issues/new/choose).
# Objective
`ComponentIdFor` is a type that gives you access to a component's
`ComponentId` in a system. It is currently awkward to use, since it must
be wrapped in a `Local<>` to be used.
## Solution
Make `ComponentIdFor` a proper SystemParam.
---
## Changelog
- Refactored the type `ComponentIdFor` in order to simplify how it is
used.
## Migration Guide
The type `ComponentIdFor<T>` now implements `SystemParam` instead of
`FromWorld` -- this means it should be used as the parameter for a
system directly instead of being used in a `Local`.
```rust
// Before:
fn my_system(
component_id: Local<ComponentIdFor<MyComponent>>,
) {
let component_id = **component_id;
}
// After:
fn my_system(
component_id: ComponentIdFor<MyComponent>,
) {
let component_id = component_id.get();
}
```
# Objective
Follow-up to #6404 and #8292.
Mutating the world through a shared reference is surprising, and it
makes the meaning of `&World` unclear: sometimes it gives read-only
access to the entire world, and sometimes it gives interior mutable
access to only part of it.
This is an up-to-date version of #6972.
## Solution
Use `UnsafeWorldCell` for all interior mutability. Now, `&World`
*always* gives you read-only access to the entire world.
---
## Changelog
TODO - do we still care about changelogs?
## Migration Guide
Mutating any world data using `&World` is now considered unsound -- the
type `UnsafeWorldCell` must be used to achieve interior mutability. The
following methods now accept `UnsafeWorldCell` instead of `&World`:
- `QueryState`: `get_unchecked`, `iter_unchecked`,
`iter_combinations_unchecked`, `for_each_unchecked`,
`get_single_unchecked`, `get_single_unchecked_manual`.
- `SystemState`: `get_unchecked_manual`
```rust
let mut world = World::new();
let mut query = world.query::<&mut T>();
// Before:
let t1 = query.get_unchecked(&world, entity_1);
let t2 = query.get_unchecked(&world, entity_2);
// After:
let world_cell = world.as_unsafe_world_cell();
let t1 = query.get_unchecked(world_cell, entity_1);
let t2 = query.get_unchecked(world_cell, entity_2);
```
The methods `QueryState::validate_world` and
`SystemState::matches_world` now take a `WorldId` instead of `&World`:
```rust
// Before:
query_state.validate_world(&world);
// After:
query_state.validate_world(world.id());
```
The methods `QueryState::update_archetypes` and
`SystemState::update_archetypes` now take `UnsafeWorldCell` instead of
`&World`:
```rust
// Before:
query_state.update_archetypes(&world);
// After:
query_state.update_archetypes(world.as_unsafe_world_cell_readonly());
```
# Objective
The method `UnsafeWorldCell::read_change_tick` was renamed in #8588, but
I forgot to update a usage of this method in a doctest.
## Solution
Update the method call.
# Objective
To mirror the `Ref` added as `WorldQuery`, and the `Mut` in
`EntityMut::get_mut`, we add `EntityRef::get_ref`, which retrieves `T`
with tick information, but *immutably*.
## Solution
- Add the method in question, also add it to`UnsafeEntityCell` since
this seems to be the best way of getting that information.
Also update/add safety comments to neighboring code.
---
## Changelog
- Add `EntityRef::get_ref` to get an `Option<Ref<T>>` from `EntityRef`
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
The method `QueryState::par_iter` does not currently force the query to
be read-only. This means you can unsoundly mutate a world through an
immutable reference in safe code.
```rust
fn bad_system(world: &World, mut query: Local<QueryState<&mut T>>) {
query.par_iter(world).for_each_mut(|mut x| *x = unsoundness);
}
```
## Solution
Use read-only versions of the `WorldQuery` types.
---
## Migration Guide
The function `QueryState::par_iter` now forces any world accesses to be
read-only, similar to how `QueryState::iter` works. Any code that
previously mutated the world using this method was *unsound*. If you
need to mutate the world, use `par_iter_mut` instead.
# Objective
Make a combined system cloneable if both systems are cloneable on their
own. This is necessary for using chained conditions (e.g
`cond1.and_then(cond2)`) with `distributive_run_if()`.
## Solution
Implement `Clone` for `CombinatorSystem<Func, A, B>` where `A, B:
Clone`.
# Objective
EntityRef::get_change_ticks mentions that ComponentTicks is useful to
create change detection for your own runtime.
However, ComponentTicks doesn't even expose enough data to create
something that implements DetectChanges. Specifically, we need to be
able to extract the last change tick.
## Solution
We add a method to get the last change tick. We also add a method to get
the added tick.
## Changelog
- Add `last_changed_tick` and `added_tick` to `ComponentTicks`
# Objective
- Fixes#8811 .
## Solution
- Rename "write" method to "apply" in Command trait definition.
- Rename other implementations of command trait throughout bevy's code
base.
---
## Changelog
- Changed: `Command::write` has been changed to `Command::apply`
- Changed: `EntityCommand::write` has been changed to
`EntityCommand::apply`
## Migration Guide
- `Command::write` implementations need to be changed to implement
`Command::apply` instead. This is a mere name change, with no further
actions needed.
- `EntityCommand::write` implementations need to be changed to implement
`EntityCommand::apply` instead. This is a mere name change, with no
further actions needed.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- I can't map unsized type using `Ref::map` (for example `dyn Reflect`)
## Solution
- Allow unsized types (this is possible because `Ref` stores a reference
to `T`)
# Objective
`QueryState` exposes a `get_manual` and `iter_manual` method. However,
there is now `iter_many_manual`.
`iter_many_manual` is useful when you have a `&World` (eg: the `world`
in a `Scene`) and want to run a query several times on it (eg:
iteratively navigate a hierarchy by calling `iter_many` on `Children`
component).
`iter_many`'s need for a `&mut World` makes the API much less flexible.
The exclusive access pattern requires doing some very funky dance and
excludes a category of algorithms for hierarchy traversal.
## Solution
- Add a `iter_many_manual` method to `QueryState`
### Alternative
My current workaround is to use `get_manual`. However, this doesn't
benefit from the optimizations on `QueryManyIter`.
---
## Changelog
- Add a `iter_many_manual` method to `QueryState`
# Objective
Title.
---------
Co-authored-by: François <mockersf@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
`Ref` is a useful way of accessing change detection data.
However, unlike `Mut`, it doesn't expose a constructor or even a way to
go from `Ref<A>` to `Ref<B>`.
Such methods could be useful, for example, to 3rd party crates that want
to expose change detection information in a clean way.
My use case is to map a `Ref<T>` into a `Ref<dyn Reflect>`, and keep
change detection info to avoid running expansive routines.
## Solution
We add the `new` and `map` methods. Since similar methods exist on `Mut`
where they are much more footgunny to use, I judged that it was
acceptable to create such methods.
## Workaround
Currently, it's not possible to create/project `Ref`s. One can define
their own `Ref` and implement `ChangeDetection` on it. One would then
use `ChangeTrackers` to populate the custom `Ref` with tick data.
---
## Changelog
- Added the `Ref::map` and `Ref::new` methods for more ergonomic `Ref`s
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
Be consistent with `Resource`s and `Components` and have `Event` types
be more self-documenting.
Although not susceptible to accidentally using a function instead of a
value due to `Event`s only being initialized by their type, much of the
same reasoning for removing the blanket impl on `Resource` also applies
here.
* Not immediately obvious if a type is intended to be an event
* Prevent invisible conflicts if the same third-party or primitive types
are used as events
* Allows for further extensions (e.g. opt-in warning for missed events)
## Solution
Remove the blanket impl for the `Event` trait. Add a derive macro for
it.
---
## Changelog
- `Event` is no longer implemented for all applicable types. Add the
`#[derive(Event)]` macro for events.
## Migration Guide
* Add the `#[derive(Event)]` macro for events. Third-party types used as
events should be wrapped in a newtype.
# Objective
- Introduce a stable alternative to
[`std::any::type_name`](https://doc.rust-lang.org/std/any/fn.type_name.html).
- Rewrite of #5805 with heavy inspiration in design.
- On the path to #5830.
- Part of solving #3327.
## Solution
- Add a `TypePath` trait for static stable type path/name information.
- Add a `TypePath` derive macro.
- Add a `impl_type_path` macro for implementing internal and foreign
types in `bevy_reflect`.
---
## Changelog
- Added `TypePath` trait.
- Added `DynamicTypePath` trait and `get_type_path` method to `Reflect`.
- Added a `TypePath` derive macro.
- Added a `bevy_reflect::impl_type_path` for implementing `TypePath` on
internal and foreign types in `bevy_reflect`.
- Changed `bevy_reflect::utility::(Non)GenericTypeInfoCell` to
`(Non)GenericTypedCell<T>` which allows us to be generic over both
`TypeInfo` and `TypePath`.
- `TypePath` is now a supertrait of `Asset`, `Material` and
`Material2d`.
- `impl_reflect_struct` needs a `#[type_path = "..."]` attribute to be
specified.
- `impl_reflect_value` needs to either specify path starting with a
double colon (`::core::option::Option`) or an `in my_crate::foo`
declaration.
- Added `bevy_reflect_derive::ReflectTypePath`.
- Most uses of `Ident` in `bevy_reflect_derive` changed to use
`ReflectTypePath`.
## Migration Guide
- Implementors of `Asset`, `Material` and `Material2d` now also need to
derive `TypePath`.
- Manual implementors of `Reflect` will need to implement the new
`get_type_path` method.
## Open Questions
- [x] ~This PR currently does not migrate any usages of
`std::any::type_name` to use `bevy_reflect::TypePath` to ease the review
process. Should it?~ Migration will be left to a follow-up PR.
- [ ] This PR adds a lot of `#[derive(TypePath)]` and `T: TypePath` to
satisfy new bounds, mostly when deriving `TypeUuid`. Should we make
`TypePath` a supertrait of `TypeUuid`? [Should we remove `TypeUuid` in
favour of
`TypePath`?](2afbd85532 (r961067892))
# Objective
- `apply_system_buffers` is an unhelpful name: it introduces a new
internal-only concept
- this is particularly rough for beginners as reasoning about how
commands work is a critical stumbling block
## Solution
- rename `apply_system_buffers` to the more descriptive `apply_deferred`
- rename related fields, arguments and methods in the internals fo
bevy_ecs for consistency
- update the docs
## Changelog
`apply_system_buffers` has been renamed to `apply_deferred`, to more
clearly communicate its intent and relation to `Deferred` system
parameters like `Commands`.
## Migration Guide
- `apply_system_buffers` has been renamed to `apply_deferred`
- the `apply_system_buffers` method on the `System` trait has been
renamed to `apply_deferred`
- the `is_apply_system_buffers` function has been replaced by
`is_apply_deferred`
- `Executor::set_apply_final_buffers` is now
`Executor::set_apply_final_deferred`
- `Schedule::apply_system_buffers` is now `Schedule::apply_deferred`
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
- Supress false positive `redundant_clone` lints.
- Supress inactionable `result_large_err` lint.
Most of the size(50 out of 68 bytes) is coming from
`naga::WithSpan<naga::valid::ValidationError>`
# Objective
The `Condition` trait is only implemented for systems and system
functions that take no input. This can make it awkward to write
conditions that are intended to be used with system piping.
## Solution
Add an `In` generic to the trait. It defaults to `()`.
---
## Changelog
- Made the `Condition` trait generic over system inputs.
# Objective
Several of our built-in `Command` types are too public:
- `GetOrSpawn` is public, even though it only makes sense to call it
from within `Commands::get_or_spawn`.
- `Remove` and `RemoveResource` contain public `PhantomData` marker
fields.
## Solution
Remove `GetOrSpawn` and use an anonymous command. Make the marker fields
private.
---
## Migration Guide
The `Command` types `Remove` and `RemoveResource` may no longer be
constructed manually.
```rust
// Before:
commands.add(Remove::<T> {
entity: id,
phantom: PhantomData,
});
// After:
commands.add(Remove::<T>::new(id));
// Before:
commands.add(RemoveResource::<T> { phantom: PhantomData });
// After:
commands.add(RemoveResource::<T>::new());
```
The command type `GetOrSpawn` has been removed. It was not possible to
use this type outside of `bevy_ecs`.
# Objective
Add documentation to `Query` and `QueryState` errors in bevy_ecs
(`QuerySingleError`, `QueryEntityError`, `QueryComponentError`)
## Solution
- Change display message for `QueryEntityError::QueryDoesNotMatch`: this
error can also happen when the entity has a component which is filtered
out (with `Without<C>`)
- Fix wrong reference in the documentation of `Query::get_component` and
`Query::get_component_mut` from `QueryEntityError` to
`QueryComponentError`
- Complete the documentation of the three error enum variants.
- Add examples for `QueryComponentError::MissingReadAccess` and
`QueryComponentError::MissingWriteAccess`
- Add reference to `QueryState` in `QueryEntityError`'s documentation.
---
## Migration Guide
Expect `QueryEntityError::QueryDoesNotMatch`'s display message to
change? Not sure that counts.
---------
Co-authored-by: harudagondi <giogdeasis@gmail.com>
# Objective
Fix#7833.
Safety comments in the multi-threaded executor don't really talk about
system world accesses, which makes it unclear if the code is actually
valid.
## Solution
Update the `System` trait to use `UnsafeWorldCell`. This type's API is
written in a way that makes it much easier to cleanly maintain safety
invariants. Use this type throughout the multi-threaded executor, with a
liberal use of safety comments.
---
## Migration Guide
The `System` trait now uses `UnsafeWorldCell` instead of `&World`. This
type provides a robust API for interior mutable world access.
- The method `run_unsafe` uses this type to manage world mutations
across multiple threads.
- The method `update_archetype_component_access` uses this type to
ensure that only world metadata can be used.
```rust
let mut system = IntoSystem::into_system(my_system);
system.initialize(&mut world);
// Before:
system.update_archetype_component_access(&world);
unsafe { system.run_unsafe(&world) }
// After:
system.update_archetype_component_access(world.as_unsafe_world_cell_readonly());
unsafe { system.run_unsafe(world.as_unsafe_world_cell()) }
```
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Allow for directly call methods on states without first calling
`state.get().my_method()`
## Solution
- Implement `Deref` for `State<S>` with `Target = S`
---
*I did not implement `DerefMut` because states hold no data and should
only be changed via `NextState::set()`*
# Objective
This method has no documentation and it's extremely unclear what it
does, or what the returned tick represents.
## Solution
Write documentation.
# Objective
The unit test `chang_tick_wraparound` is meant to ensure that change
ticks correctly deal with wrapping by setting the world's
`last_change_tick` to `u32::MAX`. However, since systems don't use* the
value of `World::last_change_tick`, this test doesn't actually involve
any wrapping behavior.
*exclusive systems do use `World::last_change_tick`; however it gets
overwritten by the system's own last tick in `System::run`.
## Solution
Use `QueryState` instead of systems in the unit test. This approach
actually uses `World::last_change_tick`, so it properly tests that
change ticks deal with wrapping correctly.
# Objective
`ScheduleGraph` currently stores run conditions in a
`Option<Vec<BoxedCondition>>`. The `Option` is unnecessary, since we can
just use an empty vector instead of `None`.
# Objective
The method `UnsafeWorldCell::world_mut` is a special case, since its
safety contract is more difficult to satisfy than the other methods on
`UnsafeWorldCell`. Rewrite its documentation to be specific about when
it can and cannot be used. Provide examples and emphasize that it is
unsound to call in most cases.
# Objective
The method `UnsafeWorldCell::read_change_tick` is longer than it needs
to be. `World` only has a method called this because it has two methods
for getting a change tick: one that takes `&self` and one that takes
`&mut self`. Since this distinction is not applicable to
`UnsafeWorldCell`, we should just call this method `change_tick`.
## Solution
Deprecate the current method and add a new one called `change_tick`.
---
## Changelog
- Renamed `UnsafeWorldCell::read_change_tick` to `change_tick`.
## Migration Guide
The `UnsafeWorldCell` method `read_change_tick` has been renamed to
`change_tick`.
# Objective
Fixes#8528
## Solution
Manually implement `PartialEq`, `Eq`, `PartialOrd`, `Ord`, and `Hash`
for `bevy_ecs::event::EventId`. These new implementations do not rely on
the `Event` implementing the same traits allowing `EventId` to be used
in more cases.
# Objective
After fixing dynamic scene to only map specific entities, we want
map_entities to default to the less error prone behavior and have the
previous behavior renamed to "map_all_entities." As this is a breaking
change, it could not be pushed out with the bug fix.
## Solution
Simple rename and refactor.
## Changelog
### Changed
- `map_entities` now accepts a list of entities to apply to, with
`map_all_entities` retaining previous behavior of applying to all
entities in the map.
## Migration Guide
- In `bevy_ecs`, `ReflectMapEntities::map_entites` now requires an
additional `entities` parameter to specify which entities it applies to.
To keep the old behavior, use the new
`ReflectMapEntities::map_all_entities`, but consider if passing the
entities in specifically might be better for your use case to avoid
bugs.
# Objective
- Handle dangling entity references inside scenes
- Handle references to entities with generation > 0 inside scenes
- Fix a latent bug in `Parent`'s `MapEntities` implementation, which
would, if the parent was outside the scene, cause the scene to be loaded
into the new world with a parent reference potentially pointing to some
random entity in that new world.
- Fixes#4793 and addresses #7235
## Solution
- DynamicScenes now identify entities with a `Entity` instead of a u32,
therefore including generation
- `World` exposes a new `reserve_generations` function that despawns an
entity and advances its generation by some extra amount.
- `MapEntities` implementations have a new `get_or_reserve` function
available that will always return an `Entity`, establishing a new
mapping to a dead entity when the entity they are called with is not in
the `EntityMap`. Subsequent calls with that same `Entity` will return
the same newly created dead entity reference, preserving equality
semantics.
- As a result, after loading a scene containing references to dead
entities (or entities otherwise outside the scene), those references
will all point to different generations on a single entity id in the new
world.
---
## Changelog
### Changed
- In serialized scenes, entities are now identified by a u64 instead of
a u32.
- In serialized scenes, components with entity references now have those
references serialize as u64s instead of structs.
### Fixed
- Scenes containing components with entity references will now
deserialize and add to a world reliably.
## Migration Guide
- `MapEntities` implementations must change from a `&EntityMap`
parameter to a `&mut EntityMapper` parameter and can no longer return a
`Result`. Finally, they should switch from calling `EntityMap::get` to
calling `EntityMapper::get_or_reserve`.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Links in the api docs are nice. I noticed that there were several places
where structs / functions and other things were referenced in the docs,
but weren't linked. I added the links where possible / logical.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Methods for interacting with world schedules currently have two
variants: one that takes `impl ScheduleLabel` and one that takes `&dyn
ScheduleLabel`. Operations such as `run_schedule` or `schedule_scope`
only use the label by reference, so there is little reason to have an
owned variant of these functions.
## Solution
Decrease maintenance burden by merging the `ref` variants of these
functions with the owned variants.
---
## Changelog
- Deprecated `World::run_schedule_ref`. It is now redundant, since
`World::run_schedule` can take values by reference.
## Migration Guide
The method `World::run_schedule_ref` has been deprecated, and will be
removed in the next version of Bevy. Use `run_schedule` instead.
# Objective
Label traits such as `ScheduleLabel` currently have a major footgun: the
trait is implemented for `Box<dyn ScheduleLabel>`, but the
implementation does not function as one would expect since `Box<T>` is
considered to be a distinct type from `T`. This is because the behavior
of the `ScheduleLabel` trait is specified mainly through blanket
implementations, which prevents `Box<dyn ScheduleLabel>` from being
properly special-cased.
## Solution
Replace the blanket-implemented behavior with a series of methods
defined on `ScheduleLabel`. This allows us to fully special-case
`Box<dyn ScheduleLabel>` .
---
## Changelog
Fixed a bug where boxed label types (such as `Box<dyn ScheduleLabel>`)
behaved incorrectly when compared with concretely-typed labels.
## Migration Guide
The `ScheduleLabel` trait has been refactored to no longer depend on the
traits `std::any::Any`, `bevy_utils::DynEq`, and `bevy_utils::DynHash`.
Any manual implementations will need to implement new trait methods in
their stead.
```rust
impl ScheduleLabel for MyType {
// Before:
fn dyn_clone(&self) -> Box<dyn ScheduleLabel> { ... }
// After:
fn dyn_clone(&self) -> Box<dyn ScheduleLabel> { ... }
fn as_dyn_eq(&self) -> &dyn DynEq {
self
}
// No, `mut state: &mut` is not a typo.
fn dyn_hash(&self, mut state: &mut dyn Hasher) {
self.hash(&mut state);
// Hashing the TypeId isn't strictly necessary, but it prevents collisions.
TypeId::of::<Self>().hash(&mut state);
}
}
```
Added helper extracted from #7711. that PR contains some controversy
conditions, but this one should be good to go.
---
## Changelog
### Added
- `any_component_removed` condition.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Follow-up to #8377.
As the system module has been refactored, there are many types that no
longer make sense to live in the files that they do:
- The `IntoSystem` trait is in `function_system.rs`, even though this
trait is relevant to all kinds of systems. Same for the `In<T>` type.
- `PipeSystem` is now just an implementation of `CombinatorSystem`, so
`system_piping.rs` no longer needs its own file.
## Solution
- Move `IntoSystem`, `In<T>`, and system piping combinators & tests into
the top-level `mod.rs` file for `bevy_ecs::system`.
- Move `PipeSystem` into `combinator.rs`.
# Objective
- Currently, it is not possible to call `.pipe` on a system that takes
any input other than `()`.
- The `IntoPipeSystem` trait is currently very difficult to parse due to
its use of generics.
## Solution
Remove the `IntoPipeSystem` trait, and move the `pipe` method to
`IntoSystem`.
---
## Changelog
- System piping has been made more flexible: it is now possible to call
`.pipe` on a system that takes an input.
## Migration Guide
The `IntoPipeSystem` trait has been removed, and the `pipe` method has
been moved to the `IntoSystem` trait.
```rust
// Before:
use bevy_ecs::system::IntoPipeSystem;
schedule.add_systems(first.pipe(second));
// After:
use bevy_ecs::system::IntoSystem;
schedule.add_systems(first.pipe(second));
```
# Objective
- Fixes unclear warning when `insert_non_send_resource` is called on a
Send resource
## Solution
- Add a message to the asssert statement that checks this
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
The implementation of `System::run_unsafe` for `FunctionSystem` requires
that the world is the same one used to initialize the system. However,
the `System` trait has no requirements that the world actually matches,
which makes this implementation unsound.
This was previously mentioned in
https://github.com/bevyengine/bevy/pull/7605#issuecomment-1426491871
Fixes part of #7833.
## Solution
Add the safety invariant that
`System::update_archetype_component_access` must be called prior to
`System::run_unsafe`. Since
`FunctionSystem::update_archetype_component_access` properly validates
the world, this ensures that `run_unsafe` is not called with a
mismatched world.
Most exclusive systems are not required to be run on the same world that
they are initialized with, so this is not a concern for them. Systems
formed by combining an exclusive system with a regular system *do*
require the world to match, however the validation is done inside of
`System::run` when needed.
# Objective
This PR attempts to improve query compatibility checks in scenarios
involving `Or` filters.
Currently, for the following two disjoint queries, Bevy will throw a
panic:
```
fn sys(_: Query<&mut C, Or<(With<A>, With<B>)>>, _: Query<&mut C, (Without<A>, Without<B>)>) {}
```
This PR addresses this particular scenario.
## Solution
`FilteredAccess::with` now stores a vector of `AccessFilters`
(representing a pair of `with` and `without` bitsets), where each member
represents an `Or` "variant".
Filters like `(With<A>, Or<(With<B>, Without<C>)>` are expected to be
expanded into `A * B + A * !C`.
When calculating whether queries are compatible, every `AccessFilters`
of a query is tested for incompatibility with every `AccessFilters` of
another query.
---
## Changelog
- Improved system and query data access compatibility checks in
scenarios involving `Or` filters
---------
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
If you want to execute a schedule on the world using arbitrarily complex
behavior, you currently need to use "hokey-pokey strats": remove the
schedule from the world, do your thing, and add it back to the world.
Not only is this cumbersome, it's potentially error-prone as one might
forget to re-insert the schedule.
## Solution
Add the `World::{try}schedule_scope{ref}` family of functions, which is
a convenient abstraction over hokey pokey strats. This method
essentially works the same way as `World::resource_scope`.
### Example
```rust
// Run the schedule five times.
world.schedule_scope(MySchedule, |world, schedule| {
for _ in 0..5 {
schedule.run(world);
}
});
```
---
## Changelog
Added the `World::schedule_scope` family of methods, which provide a way
to get mutable access to a world and one of its schedules at the same
time.
---------
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
The behavior of change detection within `PipeSystem` is very tricky and
subtle, and is not currently covered by any of our tests as far as I'm
aware.
# Objective
Upon closer inspection, there are a few functions in the ECS that are
not being inlined, even with the highest optimizations and LTO enabled:
- Almost all
[WorldQuery::init_fetch](9fd5f20e25/results/query_get.s (L57))
calls. Affects `Query::get` calls in hot loops. In particular, the
`WorldQuery` implementation for `()` is used *everywhere* as the default
filter and is effectively a no-op.
-
[Entities::get](9fd5f20e25/results/query_get.s (L39)).
Affects `Query::get`, `World::get`, and any component insertion or
removal.
-
[Entities::set](9fd5f20e25/results/entity_remove.s (L2487)).
Affects any component insertion or removal.
-
[Tick::new](9fd5f20e25/results/entity_insert.s (L1368)).
I've only seen this in component insertion and spawning.
- ArchetypeRow::new
- BlobVec::set_len
Almost all of these have trivial or even empty implementations or have
significant opportunity to be optimized into surrounding code when
inlined with LTO enabled.
## Solution
Inline them
# Objective
The method `World::try_run_schedule` currently panics if the `Schedules`
resource does not exist, but it should just return an `Err`. Similarly,
`World::add_schedule` panics unnecessarily if the resource does not
exist.
Also, the documentation for `World::add_schedule` is completely wrong.
## Solution
When the `Schedules` resource does not exist, we now treat it the same
as if it did exist but was empty. When calling `add_schedule`, we
initialize it if it does not exist.
# Objective
Fixes#8215 and #8152. When systems panic, it causes the main thread to
panic as well, which clutters the output.
## Solution
Resolves the panic in the multi-threaded scheduler. Also adds an extra
message that tells the user the system that panicked.
Using the example from the issue, here is what the messages now look
like:
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Update, panicking_system)
.run();
}
fn panicking_system() {
panic!("oooh scary");
}
```
### Before
```
Compiling bevy_test v0.1.0 (E:\Projects\Rust\bevy_test)
Finished dev [unoptimized + debuginfo] target(s) in 2m 58s
Running `target\debug\bevy_test.exe`
2023-03-30T22:19:09.234932Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Windows 10 Pro", kernel: "19044", cpu: "AMD Ryzen 5 2600 Six-Core Processor", core_count: "6", memory: "15.9 GiB" }
thread 'Compute Task Pool (5)' panicked at 'oooh scary', src\main.rs:11:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
thread 'Compute Task Pool (5)' panicked at 'A system has panicked so the executor cannot continue.: RecvError', E:\Projects\Rust\bevy\crates\bevy_ecs\src\schedule\executor\multi_threaded.rs:194:60
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', E:\Projects\Rust\bevy\crates\bevy_tasks\src\task_pool.rs:376:49
error: process didn't exit successfully: `target\debug\bevy_test.exe` (exit code: 101)
```
### After
```
Compiling bevy_test v0.1.0 (E:\Projects\Rust\bevy_test)
Finished dev [unoptimized + debuginfo] target(s) in 2.39s
Running `target\debug\bevy_test.exe`
2023-03-30T22:11:24.748513Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Windows 10 Pro", kernel: "19044", cpu: "AMD Ryzen 5 2600 Six-Core Processor", core_count: "6", memory: "15.9 GiB" }
thread 'Compute Task Pool (5)' panicked at 'oooh scary', src\main.rs:11:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Encountered a panic in system `bevy_test::panicking_system`!
Encountered a panic in system `bevy_app::main_schedule::Main::run_main`!
error: process didn't exit successfully: `target\debug\bevy_test.exe` (exit code: 101)
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fix#8191.
Currently, a state transition will be triggered whenever the `NextState`
resource has a value, even if that "transition" is to the same state as
the previous one. This caused surprising/meaningless behavior, such as
the existence of an `OnTransition { from: A, to: A }` schedule.
## Solution
State transition schedules now only run if the new state is not equal to
the old state. Change detection works the same way, only being triggered
when the states compare not equal.
---
## Changelog
- State transition schedules are no longer run when transitioning to and
from the same state.
## Migration Guide
State transitions are now only triggered when the exited and entered
state differ. This means that if the world is currently in state `A`,
the `OnEnter(A)` schedule (or `OnExit`) will no longer be run if you
queue up a state transition to the same state `A`.
# Objective
Noticed while writing #7728 that we are using `trace!` logs in our event
functions. This has shown to have significant overhead, even trace level
logs are disabled globally, as seen in #7639.
## Solution
Use the `detailed_trace!` macro introduced in #7639. Also removed the
`event_trace` function that was only used in one location.
---
## Changelog
Changed: Event trace logs are now feature gated behind the
`detailed-trace` feature.
Fixes#8333
# Objective
Fixes issue which causes failure to compile if using
`#![deny(missing_docs)]`.
## Solution
Added some very basic commenting to the generated read-only fields.
honestly I feel this to be up for debate since the comments are very
basic and give very little useful information but the purpose of this PR
is to fix the issue at hand.
---
## Changelog
Added comments to the derive macro and the projects now successfully
compile.
---------
Co-authored-by: lupan <kallll5@hotmail.com>
Fixes issue mentioned in PR #8285.
_Note: By mistake, this is currently dependent on #8285_
# Objective
Ensure consistency in the spelling of the documentation.
Exceptions:
`crates/bevy_mikktspace/src/generated.rs` - Has not been changed from
licence to license as it is part of a licensing agreement.
Maybe for further consistency,
https://github.com/bevyengine/bevy-website should also be given a look.
## Solution
### Changed the spelling of the current words (UK/CN/AU -> US) :
cancelled -> canceled (Breaking API changes in #8285)
behaviour -> behavior (Breaking API changes in #8285)
neighbour -> neighbor
grey -> gray
recognise -> recognize
centre -> center
metres -> meters
colour -> color
### ~~Update [`engine_style_guide.md`]~~ Moved to #8324
---
## Changelog
Changed UK spellings in documentation to US
## Migration Guide
Non-breaking changes*
\* If merged after #8285
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
State requires a kind of awkward `state.0` to get the current state and
exposes the field directly to manipulation.
## Solution
Make it accessible through a getter method as well as privatize the
field to make sure false assumptions about setting the state aren't
made.
## Migration Guide
- Use `State::get` instead of accessing the tuple field directly.
# Objective
The `#[derive(WorldQuery)]` macro currently only supports structs with
named fields.
Same motivation as #6957. Remove sharp edges from the derive macro, make
it just work more often.
## Solution
Support tuple structs.
---
## Changelog
+ Added support for tuple structs to the `#[derive(WorldQuery)]` macro.
# Objective
While migrating the engine to use the `Tick` type in #7905, I forgot to
update `UnsafeWorldCell::increment_change_tick`.
## Solution
Update the function.
---
## Changelog
- The function `UnsafeWorldCell::increment_change_tick` is now
strongly-typed, returning a value of type `Tick` instead of a raw `u32`.
## Migration Guide
The function `UnsafeWorldCell::increment_change_tick` is now
strongly-typed, returning a value of type `Tick` instead of a raw `u32`.
# Objective
The type `&World` is currently in an awkward place, since it has two
meanings:
1. Read-only access to the entire world.
2. Interior mutable access to the world; immutable and/or mutable access
to certain portions of world data.
This makes `&World` difficult to reason about, and surprising to see in
function signatures if one does not know about the interior mutable
property.
The type `UnsafeWorldCell` was added in #6404, which is meant to
alleviate this confusion by adding a dedicated type for interior mutable
world access. However, much of the engine still treats `&World` as an
interior mutable-ish type. One of those places is `SystemParam`.
## Solution
Modify `SystemParam::get_param` to accept `UnsafeWorldCell` instead of
`&World`. Simplify the safety invariants, since the `UnsafeWorldCell`
type encapsulates the concept of constrained world access.
---
## Changelog
`SystemParam::get_param` now accepts an `UnsafeWorldCell` instead of
`&World`. This type provides a high-level API for unsafe interior
mutable world access.
## Migration Guide
For manual implementers of `SystemParam`: the function `get_item` now
takes `UnsafeWorldCell` instead of `&World`. To access world data, use:
* `.get_entity()`, which returns an `UnsafeEntityCell` which can be used
to access component data.
* `get_resource()` and its variants, to access resource data.
# Objective
The function `SyncUnsafeCell::from_mut` returns `&SyncUnsafeCell<T>`,
even though it could return `&mut SyncUnsafeCell<T>`. This means it is
not possible to call `get_mut` on the returned value, so you need to use
unsafe code to get exclusive access back.
## Solution
Return `&mut Self` instead of `&Self` in `SyncUnsafeCell::from_mut`.
This is consistent with my proposal for `UnsafeCell::from_mut`:
https://github.com/rust-lang/libs-team/issues/198.
Replace an unsafe pointer dereference with a safe call to `get_mut`.
---
## Changelog
+ The function `bevy_utils::SyncUnsafeCell::get_mut` now returns a value
of type `&mut SyncUnsafeCell<T>`. Previously, this returned an immutable
reference.
## Migration Guide
The function `bevy_utils::SyncUnsafeCell::get_mut` now returns a value
of type `&mut SyncUnsafeCell<T>`. Previously, this returned an immutable
reference.
# Objective
The documentation on `QueryState::for_each_unchecked` incorrectly says
that it can only be used with read-only queries.
## Solution
Remove the inaccurate sentence.
# Objective
Follow-up to #8030.
Now that `SystemParam` and `WorldQuery` are implemented for
`PhantomData`, the `ignore` attributes are now unnecessary.
---
## Changelog
- Removed the attributes `#[system_param(ignore)]` and
`#[world_query(ignore)]`.
## Migration Guide
The attributes `#[system_param(ignore)]` and `#[world_query]` ignore
have been removed. If you were using either of these with `PhantomData`
fields, you can simply remove the attribute:
```rust
#[derive(SystemParam)]
struct MyParam<'w, 's, Marker> {
...
// Before:
#[system_param(ignore)
_marker: PhantomData<Marker>,
// After:
_marker: PhantomData<Marker>,
}
#[derive(WorldQuery)]
struct MyQuery<Marker> {
...
// Before:
#[world_query(ignore)
_marker: PhantomData<Marker>,
// After:
_marker: PhantomData<Marker>,
}
```
If you were using this for another type that implements `Default`,
consider wrapping that type in `Local<>` (this only works for
`SystemParam`):
```rust
#[derive(SystemParam)]
struct MyParam<'w, 's> {
// Before:
#[system_param(ignore)]
value: MyDefaultType, // This will be initialized using `Default` each time `MyParam` is created.
// After:
value: Local<MyDefaultType>, // This will be initialized using `Default` the first time `MyParam` is created.
}
```
If you are implementing either trait and need to preserve the exact
behavior of the old `ignore` attributes, consider manually implementing
`SystemParam` or `WorldQuery` for a wrapper struct that uses the
`Default` trait:
```rust
// Before:
#[derive(WorldQuery)
struct MyQuery {
#[world_query(ignore)]
str: String,
}
// After:
#[derive(WorldQuery)
struct MyQuery {
str: DefaultQuery<String>,
}
pub struct DefaultQuery<T: Default>(pub T);
unsafe impl<T: Default> WorldQuery for DefaultQuery<T> {
type Item<'w> = Self;
...
unsafe fn fetch<'w>(...) -> Self::Item<'w> {
Self(T::default())
}
}
```
# Objective
Our regression tests for `SystemParam` currently consist of a bunch of
loosely dispersed struct definitions. This is messy, and doesn't fully
test their functionality.
## Solution
Group the struct definitions into functions annotated with `#[test]`.
This not only makes the module more organized, but it allows us to call
`assert_is_system`, which has the potential to catch some bugs that
would have been missed with the old approach. Also, this approach is
consistent with how `WorldQuery` regression tests are organized.
# Objective
- Fixes#7659
## Solution
The idea of anonymous system sets or "implicit hidden organizational
sets" was briefly mentioned by @cart here:
https://github.com/bevyengine/bevy/pull/7634#issuecomment-1428619449.
- `Schedule::add_systems` creates an implicit, anonymous system set of
all systems in `SystemConfigs`.
- All dependencies and conditions from the `SystemConfigs` are now
applied to the implicit system set, instead of being applied to each
individual system. This should not change the behavior, AFAIU, because
`before`, `after`, `run_if` and `ambiguous_with` are transitive
properties from a set to its members.
- The newly added `AnonymousSystemSet` stores the names of its members
to provide better error messages.
- The names are stored in a reference counted slice, allowing fast
clones of the `AnonymousSystemSet`.
- However, only the pointer of the slice is used for hash and equality
operations
- This ensures that two `AnonymousSystemSet` are not equal, even if they
have the same members / member names.
- So two identical `add_systems` calls will produce two different
`AnonymousSystemSet`s.
- Clones of the same `AnonymousSystemSet` will be equal.
## Drawbacks
If my assumptions are correct, the observed behavior should stay the
same. But the number of system sets in the `Schedule` will increase with
each `add_systems` call. If this has negative performance implications,
`add_systems` could be changed to only create the implicit system set if
necessary / when a run condition was added.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
With the removal of base sets, some variants of `ScheduleBuildError` can
never occur and should be removed.
## Solution
- Remove the obsolete variants of `ScheduleBuildError`.
- Also fix a doc comment which mentioned base sets.
---
## Changelog
### Removed
- Remove `ScheduleBuildError::SystemInMultipleBaseSets` and
`ScheduleBuildError::SetInMultipleBaseSets`.
# Objective
When using `PhantomData` fields with the `#[derive(SystemParam)]` or
`#[derive(WorldQuery)]` macros, the user is required to add the
`#[system_param(ignore)]` attribute so that the macro knows to treat
that field specially. This is undesirable, since it makes the macro more
fragile and less consistent.
## Solution
Implement `SystemParam` and `WorldQuery` for `PhantomData`. This makes
the `ignore` attributes unnecessary.
Some internal changes make the derive macro compatible with types that
have invariant lifetimes, which fixes#8192. From what I can tell, this
fix requires `PhantomData` to implement `SystemParam` in order to ensure
that all of a type's generic parameters are always constrained.
---
## Changelog
+ Implemented `SystemParam` and `WorldQuery` for `PhantomData<T>`.
+ Fixed a miscompilation caused when invariant lifetimes were used with
the `SystemParam` macro.
# Objective
I ran into a case where I need to create a `CommandQueue` and push
standard `Command` actions like `Insert` or `Remove` to it manually. I
saw that `Remove` looked as follows:
```rust
struct Remove<T> {
entity: Entity,
phantom: PhantomData<T>
}
```
so naturally, I tried to use `Remove::<Foo>::from(entity)` but it didn't
exist. We need to specify the `PhantomData` explicitly when creating
this command action. The same goes for `RemoveResource` and
`InitResource`
## Solution
This PR implements the following:
- `From<Entity>` for `Remove<T>`
- `Default` for `RemoveResource` and `InitResource`
- use these traits in the implementation of methods of `Commands`
- rename `phantom` field on the structs above to `_phantom` to have a
more uniform field naming scheme for the command actions
---
## Changelog
> This section is optional. If this was a trivial fix, or has no
externally-visible impact, you can delete this section.
- Added: implemented `From<Entity>` for `Remove<T>` and `Default` for
`RemoveResource` and `InitResource` for ergonomics
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix a bug with scene reload.
(This is a copy of #7570 but without the breaking API change, in order
to allow the bugfix to be introduced in 0.10.1)
When a scene was reloaded, it was corrupting components that weren't
native to the scene itself. In particular, when a DynamicScene was
created on Entity (A), all components in the scene without parents are
automatically added as children of Entity (A). But if that scene was
reloaded and the same ID of Entity (A) was a scene ID as well*, that
parent component was corrupted, causing the hierarchy to become
malformed and bevy to panic.
*For example, if Entity (A)'s ID was 3, and the scene contained an
entity with ID 3
This issue could affect any components that:
* Implemented `MapEntities`, basically components that contained
references to other entities
* Were added to entities from a scene file but weren't defined in the
scene file
- Fixes#7529
## Solution
The solution was to keep track of entities+components that had
`MapEntities` functionality during scene load, and only apply the entity
update behavior to them. They were tracked with a HashMap from the
component's TypeID to a vector of entity ID's. Then the
`ReflectMapEntities` struct was updated to hold a function that took a
list of entities to be applied to, instead of naively applying itself to
all values in the EntityMap.
(See this PR comment
https://github.com/bevyengine/bevy/pull/7570#issuecomment-1432302796 for
a story-based explanation of this bug and solution)
## Changelog
### Fixed
- Components that implement `MapEntities` added to scene entities after
load are not corrupted during scene reload.
# Objective
Documentation should no longer be using pre-stageless terminology to
avoid confusion.
## Solution
- update all docs referring to stages to instead refer to sets/schedules
where appropriate
- also mention `apply_system_buffers` for anything system-buffer-related
that previously referred to buffers being applied "at the end of a
stage"
# Objective
`Or<T>` should be a new type of `PhantomData<T>` instead of `T`.
## Solution
Make `Or<T>` a new type of `PhantomData<T>`.
## Migration Guide
`Or<T>` is just used as a type annotation and shouldn't be constructed.
# Objective
When using the `#[derive(WorldQuery)]` macro, the `ReadOnly` struct
generated has default (private) visibility for each field, regardless of
the visibility of the original field.
## Solution
For each field of a read-only `WorldQuery` variant, use the visibility
of the associated field defined on the original struct.
# Objective
Fix#1727Fix#8010
Meta types generated by the `SystemParam` and `WorldQuery` derive macros
can conflict with user-defined types if they happen to have the same
name.
## Solution
In order to check if an identifier would conflict with user-defined
types, we can just search the original `TokenStream` passed to the macro
to see if it contains the identifier (since the meta types are defined
in an anonymous scope, it's only possible for them to conflict with the
struct definition itself). When generating an identifier for meta types,
we can simply check if it would conflict, and then add additional
characters to the name until it no longer conflicts with anything.
The `WorldQuery` "Item" and read-only structs are a part of a module's
public API, and thus it is intended for them to conflict with
user-defined types.
# Objective
The function `assert_is_system` is used in documentation tests to ensure
that example code actually produces valid systems. Currently,
`assert_is_system` just checks that each function parameter implements
`SystemParam`. To further check the validity of the system, we should
initialize the passed system so that it will be checked for conflicting
accesses. Not only does this enforce the validity of our examples, but
it provides a convenient way to demonstrate conflicting accesses via a
`should_panic` example, which is nicely rendered by rustdoc:
## Solution
Initialize the system with an empty world to trigger its internal access
conflict checks.
---
## Changelog
The function `bevy::ecs::system::assert_is_system` now panics when
passed a system with conflicting world accesses, as does
`assert_is_read_only_system`.
## Migration Guide
The functions `assert_is_system` and `assert_is_read_only_system` (in
`bevy_ecs::system`) now panic if the passed system has invalid world
accesses. Any tests that called this function on a system with invalid
accesses will now fail. Either fix the system's conflicting accesses, or
specify that the test is meant to fail:
1. For regular tests (that is, functions annotated with `#[test]`), add
the `#[should_panic]` attribute to the function.
2. For documentation tests, add `should_panic` to the start of the code
block: ` ```should_panic`
# Objective
We're currently using an unconditional `unwrap` in multiple locations
when inserting bundles into an entity when we know it will never fail.
This adds a large amount of extra branching that could be avoided on in
release builds.
## Solution
Use `DebugCheckedUnwrap` in bundle insertion code where relevant. Add
and update the safety comments to match.
This should remove the panicking branches from release builds, which has
a significant impact on the generated code:
https://github.com/james7132/bevy_asm_tests/compare/less-panicking-bundles#diff-e55a27cfb1615846ed3b6472f15a1aed66ed394d3d0739b3117f95cf90f46951R2086
shows about a 10% reduction in the number of generated instructions for
`EntityMut::insert`, `EntityMut::remove`, `EntityMut::take`, and related
functions.
---------
Co-authored-by: JoJoJet <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
This MR is a rebased and alternative proposal to
https://github.com/bevyengine/bevy/pull/5602
# Objective
- https://github.com/bevyengine/bevy/pull/4447 implemented untyped
(using component ids instead of generics and TypeId) APIs for
inserting/accessing resources and accessing components, but left
inserting components for another PR (this one)
## Solution
- add `EntityMut::insert_by_id`
- split `Bundle` into `DynamicBundle` with `get_components` and `Bundle:
DynamicBundle`. This allows the `BundleInserter` machinery to be reused
for bundles that can only be written, not read, and have no statically
available `ComponentIds`
- Compared to the original MR this approach exposes unsafe endpoints and
requires the user to manage instantiated `BundleIds`. This is quite easy
for the end user to do and does not incur the performance penalty of
checking whether component input is correctly provided for the
`BundleId`.
- This MR does ensure that constructing `BundleId` itself is safe
---
## Changelog
- add methods for inserting bundles and components to:
`world.entity_mut(entity).insert_by_id`
