# Objective
- iOS CI has linker issues https://github.com/bevyengine/bevy/runs/4388921574?check_suite_focus=true
## Solution
- Building for iOS actually requires ~~both iOS SDK for target and~~ macOS SDK for build scripts. ~~I added them both when needed~~ I replaced the iOS SDK with the maOS. This was not an issue on m1 as they are compatible enough to make the build pass.
- This completely confused `shader-sys` which fails to build in this configuration. Luckily as the example now uses the new renderer, I was able to remove the old renderer and depend no more on this lib.
This is confirmed to work:
- on intel mac with simulator
- on m1 mac with simulator
- on m1 mac with real iphone
# Objective
- Add support for `#else` for shader defs
## Solution
- When entering a scope with `#ifdef` or `#ifndef`, if the parent scope is truthy, and the shader definition is also truthy, then the a new scope is pushed onto the scope stack that is also truthy, else falsy. When encountering a subsequent else clause within a scope, if the parent is truthy and the current scope is truthy, then it should become falsy. If the parent scope is truthy and the current scope is falsy then it should become truthy. If the parent scope is falsy, then the current scope should remain falsy as the parent scope takes precedent.
- I added a simple test for an else case.
A sample implementation of how to have `iter()` work on mutable queries without breaking aliasing rules.
# Objective
- Fixes#753
## Solution
- Added a ReadOnlyFetch to WorldQuery that is the `&T` version of `&mut T` that is used to specify the return type for read only operations like `iter()`.
- ~~As the comment suggests specifying the bound doesn't work due to restrictions on defining recursive implementations (like `Or`). However bounds on the functions are fine~~ Never mind I misread how `Or` was constructed, bounds now exist.
- Note that the only mutable one has a new `Fetch` for readonly as the `State` has to be the same for any of this to work
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Changing the underlying image would not update a sprite
## Solution
- 'Detect' if the underlying image changes to update the sprite
Currently, we don't support change detection on `RenderAssets`, so we have to manually check it.
This method at least maintains the bind groups when the image isn't changing. They were cached, so I assume that's important.
This gives us correct behaviour here.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- With #3109 I broke iOS CI: https://github.com/bevyengine/bevy/runs/4374891646?check_suite_focus=true
## Solution
- Fix indentation in makefile
- Adds scheme that is now needed
With this, `make install` works on my m1 Mac but still fails on my intel Mac unless I run something like `make install; cargo build --target x86_64-apple-ios; make install; cargo build --target x86_64-apple-ios; make install`. It seems something is off when executing cargo through `xcodebuild` on my setup but not sure what. So this PR will probably not fix iOS CI 😞
This pull request aims to solve the issue of a lack of documentation in the enum WindowMode
# Objective
- Fixes#3136
## Solution
- Added a few lines of documentation that should document what the enum does better
# Objective
- Remove `cargo-lipo` as [it's deprecated](https://github.com/TimNN/cargo-lipo#maintenance-status) and doesn't work on new Apple processors
- Fix CI that will fail as soon as GitHub update the worker used by Bevy to macOS 11
## Solution
- Replace `cargo-lipo` with building with the correct target
- Setup the correct path to libraries by using `xcrun --show-sdk-path`
- Also try and fix path to cmake in case it's not found but available through homebrew
# Problem
Let's say I am writting a simple bevy plugin, and I want to depend on `bevy_ecs` crate instead of depending on the full `bevy`.
So I write the following:
*Cargo.toml*:
```toml
[dependencies]
bevy_ecs = { git = "https://github.com/bevyengine/bevy.git", rev = "94db0176fecfac7e7e9763f2dc7458a54c105886" }
```
*lib.rs*:
```rust
use bevy_ecs::prelude::*;
#[derive(Debug, Default, Component)
pub struct MyFancyComponent;
```
So far, so good. Everything works. But let's say I want to write some examples for using my plugin. And for theses I'd like to use the `bevy` crate, so that I can write complete examples (rendering stuff, etc.) that are simple and look like what the consumer of my plugin will do (`use bevy::prelude::*` and `DefaultPlugins`)
So I amend my *Cargo.toml*:
```toml
[dependencies]
bevy_ecs = { git = "https://github.com/bevyengine/bevy.git", rev = "94db0176fecfac7e7e9763f2dc7458a54c105886" }
[dev-dependencies]
bevy = { git = "https://github.com/bevyengine/bevy.git", rev = "94db0176fecfac7e7e9763f2dc7458a54c105886", default-features = false }
```
And that leads to a complilation error
```
error[E0433]: failed to resolve: use of undeclared crate or module `bevy`
```
Basically, because `bevy` is in the `dev-dependencies`, the macro (of the production code) decides to use the `bevy::ecs` path instead of `bevy_ecs`. But `bevy` is not available there.
## Solution
This PR fixes the problem. I amend the macro utility responsible of finding the path of a module.
If we try to find a path, we first test if this correspond to a crate that the user directly depend on. (Like, if we search for `bevy_ecs`, we first check if there is a `bevy_ecs` dependency). If yes, we can depend on that directly. Otherwise, we proceed with the existing logic (testing `bevy` and `bevy_internal`)
# Objective
Fixes#3160
Unless I'm mistaken, the problem was caused by a simple typo
## Solution
- Fix the typo
Reference documentation: https://git-scm.com/docs/gitattributes#_eol
## Question
Are there other file-types that should be included here?
# Objective
- Shadow maps should only be sampled if the mesh is a shadow receiver AND shadow mapping is enabled for the light
## Solution
- Fix the logic in the shader
See #3165 and #3175
# Objective
- @superdump was having trouble with this loop in the GLTF loader.
## Solution
- Make it probably linear.
- Measured times:
- Old: 40s, new: 200ms
I think there's still room for improvement. For example, I think making the nodes be in `Arc`s could be a significant gain, since currently there's duplication all the way down the tree.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Use `std140_size_static()` everywhere instead of manual sizes as the crevice rewrite appears to have fixed all the problems as it claimed to do.
I've tested `3d_scene_pipelined`, `bevymark_pipelined`, and `load_gltf_pipelined` and all three look fine.
# Objective
I need to queue my own textures up for font rendering(texture arrays) and I noticed a bunch of `ImageX`, like `ImageDataLayout`, were missing from the render resources exports.
## Solution
Add new exports to render resources.
# Objective
Allow shadow mapping to be enabled/disabled per-light.
## Solution
- NOTE: This PR is on top of https://github.com/bevyengine/bevy/pull/3072
- Add `shadows_enabled` boolean property to `PointLight` and `DirectionalLight` components.
- Do not update the frusta for the light if shadows are disabled.
- Do not check for visible entities for the light if shadows are disabled.
- Do not fetch shadows for lights with shadows disabled.
- I reworked a few types for clarity: `ViewLight` -> `ShadowView`, the bulk of `ViewLights` members -> `ViewShadowBindings`, the entities Vec in `ViewLights` -> `ViewLightEntities`, the uniform offset in `ViewLights` for `GpuLights` -> `ViewLightsUniformOffset`
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
## Shader Imports
This adds "whole file" shader imports. These come in two flavors:
### Asset Path Imports
```rust
// /assets/shaders/custom.wgsl
#import "shaders/custom_material.wgsl"
[[stage(fragment)]]
fn fragment() -> [[location(0)]] vec4<f32> {
return get_color();
}
```
```rust
// /assets/shaders/custom_material.wgsl
[[block]]
struct CustomMaterial {
color: vec4<f32>;
};
[[group(1), binding(0)]]
var<uniform> material: CustomMaterial;
```
### Custom Path Imports
Enables defining custom import paths. These are intended to be used by crates to export shader functionality:
```rust
// bevy_pbr2/src/render/pbr.wgsl
#import bevy_pbr::mesh_view_bind_group
#import bevy_pbr::mesh_bind_group
[[block]]
struct StandardMaterial {
base_color: vec4<f32>;
emissive: vec4<f32>;
perceptual_roughness: f32;
metallic: f32;
reflectance: f32;
flags: u32;
};
/* rest of PBR fragment shader here */
```
```rust
impl Plugin for MeshRenderPlugin {
fn build(&self, app: &mut bevy_app::App) {
let mut shaders = app.world.get_resource_mut::<Assets<Shader>>().unwrap();
shaders.set_untracked(
MESH_BIND_GROUP_HANDLE,
Shader::from_wgsl(include_str!("mesh_bind_group.wgsl"))
.with_import_path("bevy_pbr::mesh_bind_group"),
);
shaders.set_untracked(
MESH_VIEW_BIND_GROUP_HANDLE,
Shader::from_wgsl(include_str!("mesh_view_bind_group.wgsl"))
.with_import_path("bevy_pbr::mesh_view_bind_group"),
);
```
By convention these should use rust-style module paths that start with the crate name. Ultimately we might enforce this convention.
Note that this feature implements _run time_ import resolution. Ultimately we should move the import logic into an asset preprocessor once Bevy gets support for that.
## Decouple Mesh Logic from PBR Logic via MeshRenderPlugin
This breaks out mesh rendering code from PBR material code, which improves the legibility of the code, decouples mesh logic from PBR logic, and opens the door for a future `MaterialPlugin<T: Material>` that handles all of the pipeline setup for arbitrary shader materials.
## Removed `RenderAsset<Shader>` in favor of extracting shaders into RenderPipelineCache
This simplifies the shader import implementation and removes the need to pass around `RenderAssets<Shader>`.
## RenderCommands are now fallible
This allows us to cleanly handle pipelines+shaders not being ready yet. We can abort a render command early in these cases, preventing bevy from trying to bind group / do draw calls for pipelines that couldn't be bound. This could also be used in the future for things like "components not existing on entities yet".
# Next Steps
* Investigate using Naga for "partial typed imports" (ex: `#import bevy_pbr::material::StandardMaterial`, which would import only the StandardMaterial struct)
* Implement `MaterialPlugin<T: Material>` for low-boilerplate custom material shaders
* Move shader import logic into the asset preprocessor once bevy gets support for that.
Fixes#3132
This is a squash-and-rebase of @Ku95's documentation of the new renderer onto the latest `pipelined-rendering` branch.
Original PR is #2884.
Co-authored-by: dataphract <dataphract@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Fix nested shader defs. For example, in:
```rust
#ifdef A
#ifdef B
some code here
#endif
#endif
```
...before this PR, if `A` *is not* defined, and `B` *is* defined, then `some code here` will be output.
## Solution
- Combine the logic of whether the parent and child scope guards are defined and use that as the resulting child scope guard boolean value
# Objective
Add depth prepass and support for opaque, alpha mask, and alpha blend modes for the 3D PBR target.
## Solution
NOTE: This is based on top of #2861 frustum culling. Just lining it up to keep @cart loaded with the review train. 🚂
There are a lot of important details here. Big thanks to @cwfitzgerald of wgpu, naga, and rend3 fame for explaining how to do it properly!
* An `AlphaMode` component is added that defines whether a material should be considered opaque, an alpha mask (with a cutoff value that defaults to 0.5, the same as glTF), or transparent and should be alpha blended
* Two depth prepasses are added:
* Opaque does a plain vertex stage
* Alpha mask does the vertex stage but also a fragment stage that samples the colour for the fragment and discards if its alpha value is below the cutoff value
* Both are sorted front to back, not that it matters for these passes. (Maybe there should be a way to skip sorting?)
* Three main passes are added:
* Opaque and alpha mask passes use a depth comparison function of Equal such that only the geometry that was closest is processed further, due to early-z testing
* The transparent pass uses the Greater depth comparison function so that only transparent objects that are closer than anything opaque are rendered
* The opaque fragment shading is as before except that alpha is explicitly set to 1.0
* Alpha mask fragment shading sets the alpha value to 1.0 if it is equal to or above the cutoff, as defined by glTF
* Opaque and alpha mask are sorted front to back (again not that it matters as we will skip anything that is not equal... maybe sorting is no longer needed here?)
* Transparent is sorted back to front. Transparent fragment shading uses the alpha blending over operator
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Document that the error codes will be rendered on the bevy website (see bevyengine/bevy-website#216)
- Some Cargo.toml files did not include the license or a description field
## Solution
- Readme for the errors crate
- Mark internal/development crates with `publish = false`
- Add missing license/descriptions to some crates
- [x] merge bevyengine/bevy-website#216
# Objective
bevy_ecs has several compile_fail tests that assert lifetime safety. In the past, these tests have been green for the wrong reasons (see e.g. #2984). This PR makes sure, that they will fail if the compiler error changes.
## Solution
Use [trybuild](https://crates.io/crates/trybuild) to assert the compiler errors.
The UI tests are in a separate crate that is not part of the Bevy workspace. This is to ensure that they do not break Bevy's crater builds. The tests get executed by the CI workflow on the stable toolchain.
# Objective
Document that `AssetServer::load()` is asynchronous.
## Solution
Document that `AssetServer::load()` is asynchronous, and that the asset
will not be immediately available once the call returns. Instead,
explain that the user must call `AssetServer::get_load_state()` to
monitor the loading state of an asset.
# Objective
- `bevy_ecs` exposes as an optional feature `bevy_reflect`. Disabling it doesn't compile.
- `bevy_asset` exposes as an optional feature `filesystem_watcher`. Disabling it doesn't compile. It is also not possible to disable this feature from Bevy
## Solution
- Fix compilation errors when disabling the default features. Make it possible to disable the feature `filesystem_watcher` from Bevy
I just updated profiling.md (and accidentally skipped the pr process by not checking "create new branch" in the github ui). The markdown wasn't properly formatted, which broke the build.
Adds new `EntityRenderCommand`, `EntityPhaseItem`, and `CachedPipelinePhaseItem` traits to make it possible to reuse RenderCommands across phases. This should be helpful for features like #3072 . It also makes the trait impls slightly less generic-ey in the common cases.
This also fixes the custom shader examples to account for the recent Frustum Culling and MSAA changes (the UX for these things will be improved later).
# Objective
- Update vendor crevice to have the latest update from crevice 0.8.0
- Using https://github.com/ElectronicRU/crevice/tree/arrays which has the changes to make arrays work
## Solution
- Also updated glam and hexasphere to only have one version of glam
- From the original PR, using crevice to write GLSL code containing arrays would probably not work but it's not something used by Bevy
# Objective
Clarify the fact that setting the `RUST_LOG` environment variable
overrides any setting from the `LogSettings` resource.
## Solution
Update docstring comment for `LogSettings`.
- Requires #2997
- Removes `wasm_audio` feature as discussed in #2397
- Closes only task in #2479
Open questions:
Should we enable wasm audio by default or only when building for wasm using `cfg`?
Maybe there should be a global wasm feature for bevy?
# Objective
Implement frustum culling for much better performance on more complex scenes. With the Amazon Lumberyard Bistro scene, I was getting roughly 15fps without frustum culling and 60+fps with frustum culling on a MacBook Pro 16 with i9 9980HK 8c/16t CPU and Radeon Pro 5500M.
macOS does weird things with vsync so even though vsync was off, it really looked like sometimes other applications or the desktop window compositor were interfering, but the difference could be even more as I even saw up to 90+fps sometimes.
## Solution
- Until the https://github.com/bevyengine/rfcs/pull/12 RFC is completed, I wanted to implement at least some of the bounding volume functionality we needed to be able to unblock a bunch of rendering features and optimisations such as frustum culling, fitting the directional light orthographic projection to the relevant meshes in the view, clustered forward rendering, etc.
- I have added `Aabb`, `Frustum`, and `Sphere` types with only the necessary intersection tests for the algorithms used. I also added `CubemapFrusta` which contains a `[Frustum; 6]` and can be used by cube maps such as environment maps, and point light shadow maps.
- I did do a bit of benchmarking and optimisation on the intersection tests. I compared the [rafx parallel-comparison bitmask approach](c91bd5fcfd/rafx-visibility/src/geometry/frustum.rs (L64-L92)) with a naïve loop that has an early-out in case of a bounding volume being outside of any one of the `Frustum` planes and found them to be very similar, so I chose the simpler and more readable option. I also compared using Vec3 and Vec3A and it turned out that promoting Vec3s to Vec3A improved performance of the culling significantly due to Vec3A operations using SIMD optimisations where Vec3 uses plain scalar operations.
- When loading glTF models, the vertex attribute accessors generally store the minimum and maximum values, which allows for adding AABBs to meshes loaded from glTF for free.
- For meshes without an AABB (`PbrBundle` deliberately does not have an AABB by default), a system is executed that scans over the vertex positions to find the minimum and maximum values along each axis. This is used to construct the AABB.
- The `Frustum::intersects_obb` and `Sphere::insersects_obb` algorithm is from Foundations of Game Engine Development 2: Rendering by Eric Lengyel. There is no OBB type, yet, rather an AABB and the model matrix are passed in as arguments. This calculates a 'relative radius' of the AABB with respect to the plane normal (the plane normal in the Sphere case being something I came up with as the direction pointing from the centre of the sphere to the centre of the AABB) such that it can then do a sphere-sphere intersection test in practice.
- `RenderLayers` were copied over from the current renderer.
- `VisibleEntities` was copied over from the current renderer and a `CubemapVisibleEntities` was added to support `PointLight`s for now. `VisibleEntities` are added to views (cameras and lights) and contain a `Vec<Entity>` that is populated by culling/visibility systems that run in PostUpdate of the app world, and are iterated over in the render world for, for example, queuing up meshes to be drawn by lights for shadow maps and the main pass for cameras.
- `Visibility` and `ComputedVisibility` components were added. The `Visibility` component is user-facing so that, for example, the entity can be marked as not visible in an editor. `ComputedVisibility` on the other hand is the result of the culling/visibility systems and takes `Visibility` into account. So if an entity is marked as not being visible in its `Visibility` component, that will skip culling/visibility intersection tests and just mark the `ComputedVisibility` as false.
- The `ComputedVisibility` is used to decide which meshes to extract.
- I had to add a way to get the far plane from the `CameraProjection` in order to define an explicit far frustum plane for culling. This should perhaps be optional as it is not always desired and in that case, testing 5 planes instead of 6 is a performance win.
I think that's about all. I discussed some of the design with @cart on Discord already so hopefully it's not too far from being mergeable. It works well at least. 😄
# Objective
Fixes#2823.
## Solution
This PR adds notes to the `HashMap` and `HashSet` docs explaining why `HashMap::new()` (resp. `HashSet::new()`) is not available, and guiding the user toward using the `Default` implementation for an empty collection.
# Objective
- Improve error descriptions and help understand how to fix them
- I noticed one today that could be expanded, it seemed like a good starting point
## Solution
- Start something like https://github.com/rust-lang/rust/tree/master/compiler/rustc_error_codes/src/error_codes
- Remove sentence about Rust mutability rules which is not very helpful in the error message
I decided to start the error code with B for Bevy so that they're not confused with error code from rust (which starts with E)
Longer term, there are a few more evolutions that can continue this:
- the code samples should be compiled check, and even executed for some of them to check they have the correct error code in a panic
- the error could be build on a page in the website like https://doc.rust-lang.org/error-index.html
- most panic should have their own error code
Mention the fact that the UI layout system is based on the CSS layout
model through a docstring comment on the `Style` type.
# Objective
Explain to new users that the Bevy UI uses the CSS layout model, to lower the barrier to entry given the fact documentation (book and code) is fairly limited on the topic.
## Solution
Fix as discussed with @alice-i-cecile on #2918.
# Objective
Set initial position of the window, so I can start it at the left side of the view automatically, used with `cargo watch`
## Solution
add window position to WindowDescriptor
# Objective
- Support tangent vertex attributes, and normal maps
- Support loading these from glTF models
## Solution
- Make two pipelines in both the shadow and pbr passes, one for without normal maps, one for with normal maps
- Select the correct pipeline to bind based on the presence of the normal map texture
- Share the vertex attribute layout between shadow and pbr passes
- Refactored pbr.wgsl to share a bunch of common code between the normal map and non-normal map entry points. I tried to do this in a way that will allow custom shader reuse.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
