mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 00:33:06 +00:00
b0b8086898
The NanoPC-T6 is a Rockchip RK3588 based SBC by FriendlyElec.
There are four variants depending on the DRAM size: 4G/32GB eMMC,
8G/64GB eMMC, 16G/16MB SPI NOR, and 16G/256GB eMMC/16MB SPI NOR
Specifications:
CPU: Rockchip RK3588, 4x Cortex-A76 (up to 2.4GHz)
+ 4x Cortex-A55 (up to 1.8GHz)
GPU: Mali-G610 MP4
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder,
4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
NPU: 6TOPs, supports INT4/INT8/INT16/FP16
RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
eMMC: 0GB/32GB/64GB/256GB HS400
MicroSD Slot: MicroSD SDR104
PCIe 3.0: M.2 M-Key x1, PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s
Ethernet: PCIe 2.5G 2x Ethernet (RTL8125BG)
PCIe 2.1: M.2 E-Key x1, PCIe 2.1 x1 and USB2.0 Host,
supports M.2 WiFi and Bluetooth
4G Module: MiniPCIe x1, MicroSIM Card Slot x1
Audio Out: 3.5mm jack for stereo headphone output
Audio In: 2.0mm PH-2A connector for analog microphone input
Video Input: standard HDMI input port, up to 4Kp60
2x 4-lane MIPI-CSI, compatible with MIPI V1.2
Video Output: 2x standard HDMI output ports compatible with HDMI2.1,
HDMI2.0, and HDMI1.4
2x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1
USB-A: USB 3.0, Type A
USB-C: Full function USB Type‑C port, DP display up to 4Kp60, USB 3.0
40-pin 2.54mm header connector: up to 2x SPIs, 6x UARTs, 1x I2Cs,
8x PWMs, 2x I2Ss, 28x GPIOs
Debug UART: 3 Pin 2.54mm header, 3V level, 1500000bps
Onboard IR receiver: 38KHz carrier frequency
RTC Battery: 2 Pin 1.27/1.25mm RTC battery connector for low power
RTC IC HYM8563TS
5V Fan connector
Working Temperature: 0C to 70C
Power: 5.5*2.1mm DC Jack, 12VDC input
Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case)
Kernel commits:
893c17716d0c ("arm64: dts: rockchip: Add NanoPC T6")
a721e28dfad2 ("arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support")
ac76b786cc37 ("arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support")
Signed-off-by: John Clark <inindev@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
||
|---|---|---|
| .. | ||
| android | ||
| api | ||
| arch | ||
| board | ||
| build | ||
| chromium | ||
| develop | ||
| device-tree-bindings | ||
| imx | ||
| learn | ||
| media | ||
| mvebu | ||
| sphinx | ||
| sphinx-static | ||
| SPI | ||
| SPL | ||
| usage | ||
| .gitignore | ||
| bounces | ||
| conf.py | ||
| dumpimage.1 | ||
| feature-removal-schedule.txt | ||
| git-mailrc | ||
| I2C_Edge_Conditions | ||
| index.rst | ||
| kwboot.1 | ||
| Makefile | ||
| mkeficapsule.1 | ||
| mkfwumdata.1 | ||
| mkimage.1 | ||
| README.arm-caches | ||
| README.arm-relocation | ||
| README.armada-secureboot | ||
| README.asn1 | ||
| README.atmel_mci | ||
| README.atmel_pmecc | ||
| README.autoboot | ||
| README.bcmns3 | ||
| README.bitbangMII | ||
| README.bootcount | ||
| README.boston | ||
| README.cfi | ||
| README.commands.itest | ||
| README.commands.spl | ||
| README.console | ||
| README.davinci | ||
| README.davinci.nand_spl | ||
| README.dfutftp | ||
| README.displaying-bmps | ||
| README.dns | ||
| README.enetaddr | ||
| README.esbc_validate | ||
| README.ext4 | ||
| README.fec_mxc | ||
| README.fsl-ddr | ||
| README.fsl-esdhc | ||
| README.fsl-hwconfig | ||
| README.fsl-trustzone-components | ||
| README.fsl_iim | ||
| README.fuse | ||
| README.generic-board | ||
| README.generic_usb_ohci | ||
| README.gpio | ||
| README.gpt | ||
| README.Heterogeneous-SoCs | ||
| README.hwconfig | ||
| README.i2c | ||
| README.iomux | ||
| README.JFFS2_NAND | ||
| README.kconfig | ||
| README.kwbimage | ||
| README.LED | ||
| README.link-local | ||
| README.malta | ||
| README.marvell | ||
| README.mediatek | ||
| README.memory-test | ||
| README.mpc83xx.ddrecc | ||
| README.mpc83xxads | ||
| README.mpc85xx | ||
| README.mpc85xx-sd-spi-boot | ||
| README.mpc85xx-spin-table | ||
| README.mpc85xxcds | ||
| README.multi-dtb-fit | ||
| README.mxc_ocotp | ||
| README.nand | ||
| README.odroid | ||
| README.OFT | ||
| README.omap-ulpi-viewport | ||
| README.omap3 | ||
| README.pblimage | ||
| README.pcap | ||
| README.POST | ||
| README.power-framework | ||
| README.pxe | ||
| README.ramboot-ppc85xx | ||
| README.rockchip | ||
| README.rockusb | ||
| README.s5p4418 | ||
| README.s5pc1xx | ||
| README.sata | ||
| README.sched | ||
| README.scrapyard | ||
| README.serial_multi | ||
| README.sha1 | ||
| README.silent | ||
| README.SNTP | ||
| README.socfpga | ||
| README.splashprepare | ||
| README.srio-pcie-boot-corenet | ||
| README.standalone | ||
| README.t1040-l2switch | ||
| README.tee | ||
| README.TPL | ||
| README.ubi | ||
| README.ubispl | ||
| README.ublimage | ||
| README.udp | ||
| README.unaligned-memory-access.txt | ||
| README.uniphier | ||
| README.update | ||
| README.usb | ||
| README.vf610 | ||
| README.video | ||
| README.VLAN | ||
| README.VSC3316-3308 | ||
| README.watchdog | ||
| README.zfs | ||
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.