Commit graph

178 commits

Author SHA1 Message Date
Peng Fan
ad153782e0 imx: mx6: add clock api for lcdif
Implement mxs_set_lcdclk, enable_lcdif_clock and enable_pll_video.
The three API can be used to configure lcdif related clock when
CONFIG_VIDEO_MXS enabled.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-11-12 17:40:53 +01:00
Peng Fan
64ffef05e0 imx: mx6: crm_reg: add LCDIF related macros
Add i.MX6UL/SX LCDIF related macros. Discard uneccessary
'#ifdef xxx'.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-11-12 17:40:52 +01:00
Peng Fan
b1ce1fb527 imx: mx6: fix register address
1. Move WDOG3_BASE_ADDR to '#if !(defined(__ASSEMBLY__))'.
2. Add i.MX6UL LCDIF register base address. And Introduce
   LCDIF1_BASE_ADDR to support runtime check.
3. include <asm/imx-common/regs-lcdif.h> for imx-regs.h to avoid
   building error for mxsfb.c, since mxsfb.c use imx-regs.h.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-11-12 17:40:52 +01:00
Adrian Alonso
7a7281a91c imx: hab: rework secure boot support for imx6
Rework secure boot support for imx6, move existing hab support
for imx6 into imx-common for SoC reuse.

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-10-30 15:20:57 +01:00
Adrian Alonso
fc5ad4778d imx: cpu: move common chip revision id's
Move common chip revision id's to main cpu header file
mx25 generic include cpu header for chip revision

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-10-30 15:20:56 +01:00
Heiko Schocher
d62f2f8cdf arm, imx: add some gpr register defines
add some missing gpr register defines.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-10-30 15:08:39 +01:00
Fabio Estevam
aaf87f03ad pci: pcie_imx: Fix hang on mx6qp
PCI driver currently hangs on mx6qp.

Toggle the reset bit with the appropriate timings to fix the issue.

Based on the FSL kernel driver implementation.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-10-15 09:05:13 -04:00
Adrian Alonso
50a082a88c arm: imx: imx-common: init: move arch init common setup
Move common imx6 arch init setup, init.c can be extended
and reused to support imx7 SoC keeping init arch common
code.

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
2015-09-13 10:11:53 +02:00
Peng Fan
7296a02358 mxc: ocotp fix hole in shadow registers
There is a hole in shadow registers address map of size 0x100
between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL.
Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses,
we should account for this hole in address space.

Similar hole exists between bank 14 and bank 15 of size
0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX.
Note: iMX6SL has only 0-7 banks and there is no hole.
Note: iMX6UL doesn't have this one.

When reading, we use register offset, so need to account for holes
to get the correct address.
When writing, we use bank/word index, there is no need to account
for holes, always use bank/word index from fuse map.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2015-09-02 15:39:51 +02:00
Peng Fan
eb796cbb69 imx: mx6: ddr: add LPDDR2 support
Add LPDDR2 support:
1. Implement a function mx6_lpddr2_cfg to initialize MMDC for LPDDR2.
2. Introduce a structure mx6_lpddr2_cfg, most entrys are same to
   mx6_ddr3_cfg, but still keep it a single one for easy to choose
   parameters for LPDDR2.
3. If ddr_type is LPDDR2, use mx6_lpddr2_cfg to init MMDC.
4. Update comments.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
2015-09-02 15:34:12 +02:00
Peng Fan
f2ff834365 imx: mx6: ddr init MMDC according to ddr_type
To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg
to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper.
The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg
when ddr_type is for DDR3. Later we can use ddr_type to initialize
MMDC for LPDDR2.

Initialize ddr_type for different boards which enable SPL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:34:12 +02:00
Peng Fan
003fa83c43 imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfo
Add ddr_type entry for mx6_ddr_sysinfo. It will be used for
differenrate DDR3 and LPDDR2.

Introduce an enum type for ddr_type.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
2015-09-02 15:34:12 +02:00
Peng Fan
775d591f5d imx: mx6: ddr add mpzqlp2ctl entry
Add mpzqlp2ctl entry for mx6_mmdc_calibration.
MMDC_MPZQLP2CTL register is for init tZQINIT, tZQCL, tZQCS for LPDDR2 chips.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
2015-09-02 15:34:12 +02:00
Peng Fan
1b811e285c imx: mx6: ddr add dram io configuration and header file for i.MX6SL
Define two structure mx6sl_iomux_ddr_regs and mx6sl_iomux_grp_regs.
Add a new function mx6sl_dram_iocfg to configure dram io.
Add header file to define macros for register address.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-09-02 15:34:12 +02:00
Peng Fan
43d9dc4136 imx: mx6: ddr add more register entry for mmdc_p_regs
Add more register entry for MMDC structure.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-09-02 15:34:12 +02:00
Peng Fan
6d97dc10a8 imx: clock support enet2 anatop clock support
To i.MX6SX/UL, two ethernet interfaces are supported.
Add ENET2 clock support:
1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed.
   To value 1, only i.MX6SX/UL can pass the check.
2. Modify board code who use this api to follow new api prototype.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-09-02 15:29:14 +02:00
Peng Fan
fc684e87a1 imx-common: consolidate macros and prototypes into sys_proto.h
Move most macro definitions and prototypes into
"arch/arm/include/asm/imx-common/sys_proto.h" to avoid duplicated
function prototypes and marco definitions for different i.MX SoCs.

This patch do not remove the sys_proto.h for different i.MX SoCs,
because we need to modify lots of driver code and others. This patch
remove duplicated macros and prototypes and incude "sys_proto.h"
of imx-common for each sys_proto.h of different i.MX platforms.
Then later we should avoid add stuff in sys_proto.h of each platform,
and modify driver to include common sys_proto.h.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-09-02 15:29:14 +02:00
Peng Fan
a462c34602 imx:mx6ul add dram spl configuration and header file
1. Define two structures mx6ul_iomux_ddr_regs and mx6ul_iomux_grp_regs.
2. Add a new function mx6ul_dram_iocfg to configure dram io.
3. Refactor MMDC1 macro, discard "#ifdef CONFIG_MX6SX". Since
   only mmdc0 channel exists on i.MX6SX/UL, redefine MMDC1 macro support
   runtime check, but not hardcoding #ifdef macros.
4. Introduce mx6ul-ddr.h, which includes the register address for DRAM
   IO configuration.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:09 +02:00
Peng Fan
43cb127b75 imx:mx6ul add clock support
1. Add enet, uart, i2c, ipg clock support for i.MX6UL.
2. Correct get_periph_clk, it should account for
   MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK.
3. Refactor get_mmdc_ch0_clk to make all i.MX6 share one function,
   but not use 'ifdef'.
4. Use CONFIG_FSL_QSPI for enable_qspi_clk, but not #ifdef CONFIG_MX6SX.
5. Use CONFIG_PCIE_IMX for pcie clock settings, use CONFIG_CMD_SATA for
   sata clock settings. In this way, we not need "#if defined(CONFIG_MX6Q)
   || defined....", only need one CONFIG_PCIE_IMX in header file.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:07 +02:00
Peng Fan
d73d5aee3c imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL
Since i.MX6UL's cache line size is 64bytes, need to
define the macro CONFIG_SYS_CACHELINE_SIZE to 64 for i.MX6UL.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:07 +02:00
Peng Fan
bc32fc699c imx: mx6ul: Update imx registers head file
1. Update imx register base address for i.MX6UL.
2. Remove duplicated MXS_APBH/GPMI/BCH_BASE.
3. Remove #ifdef for register addresses that equal to
   "AIPS2_OFF_BASE_ADDR + 0x34000" for different chips.
4. According fuse map, complete fuse_bank4_regs.
5. Move AIPS3_ARB_BASE_ADDR and AIPS3_ARB_END_ADDR out of #ifdef CONFIG_MX6SX,
   because we can use runtime check

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:07 +02:00
Peng Fan
0ca54023ab imx: mx6ul: Add pins IOMUX head file
Add i.MX6UL pins IOMUX file which defines the IOMUX settings for choose.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
2015-08-02 11:05:06 +02:00
Peng Fan
e1c2d68b39 imx: mx6: ccm: Change the clock settings for i.MX6QP
Since i.MX6QP changes some CCM registers, so modify the clocks settings to
follow the hardware changes.

In c files, use runtime check and discard #ifdef.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-02 10:43:45 +02:00
Peng Fan
d0acd99334 imx: add cpu type for i.MX6QP/DP
Add cpu type for i.MX6QP/DP.

This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP
and MXC_CPU_MX6DP, we should use:
(is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)).

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-02 10:42:48 +02:00
Ulises Cardenas
29067abfaf iMX: adding parsing to hab_status command
hab_status command returns a memory dump of the hab event log. But the
raw data is not human-readable. Parsing such data into readable event
will help to minimize debbuging time.

Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com>
2015-07-10 10:00:14 +02:00
Peng Fan
19c6ec70c5 imx: mx6 add i2c4 clock support for i.MX6SX
Add I2C4 clock support for i.MX6SX. Since we use runtime check,
but not macro, we need to remove `#ifdef ..` in crm_regs.h, or
gcc will fail to compile the code succesfully.

Making the macros only for i.MX6SX open to other i.MX6x maybe not
a good choice, but we have runtime check.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-07-10 09:36:16 +02:00
Peng Fan
2d59acc70f imx: mx6 remove duplicated enable_cspi_clock
enable_spi_clock does the same thing with enable_cspi_clock, so
remove enable_cspi_clock.
Remove enable_cspi_clock prototype in header file
convert cm_fx6/spl.c to use enable_spi_clk

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-07-10 09:35:53 +02:00
Peng Fan
f9a1e9f8cc imx: mx6 introuduce macro is_mx6dqp
Add a new revision CHIP_REV_2_0.
Introudce macro is_mx6dqp, dqp means Dual/Quad Plus.
Since Dual/Quad Plus use same cpu type with Dual/Quad, but different
revision(Major Lower), we use this macro for Dual/Quad Plus.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-06-27 18:18:54 +02:00
Peng Fan
b65d9d868e imx: mx6 correct is_soc_rev usage
is_soc_rev should return a bool value, so use "==", but not "-",
change (is_soc_rev(CHIP_REV_1_0) > 0) to (soc_rev() > CHIP_REV_1_0).
This patch also add space between "&" for cpu_type(rev) macro.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-06-27 18:16:31 +02:00
Heiko Schocher
21a26940f9 arm, imx6, i2c: add I2C4 for MX6DL
add I2C4 modul for MX6DL based boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-05-26 14:16:54 +02:00
Tim Harvey
f0e8e8944d imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP
The MX6 has a temperature grade defined by OCOTP_MEM0[7:6] which is at 0x480
in the Fusemap Description Table in the reference manual. Return this value
as well as min/max temperature based on the value.

Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the
their Fusemap Description Table however Freescale has confirmed that these
eFUSE bits match the description within the IMX6DQRM and that they will
be added to the next revision of the respective reference manuals.

This has been tested with IMX6 Automative and Industrial parts.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:31:40 +02:00
Tim Harvey
9b9449c3e2 imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP
The IMX6 has four different speed grades determined by eFUSE SPEED_GRADING
indicated by OCOTP_CFG3[17:16] which is at 0x440 in the Fusemap Description
Table. Return this frequency so that it can be used elsewhere.

Note that the IMX6SDLRM and the IMX6SXRM do not indicate this in the
their Fusemap Description Table however Freescale has confirmed that these
eFUSE bits match the description within the IMX6DQRM and that they will
be added to the next revision of the respective reference manuals.

These have been tested with IMX6 Quad/Solo/Dual-light 800Mhz and 1GHz grades.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:31:25 +02:00
Tim Harvey
d43e0ab42d mx6: add OTP bank1 registers
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-19 15:28:39 +02:00
Peng Fan
7e611272dd imx: mx6sx enable SION for i2c pin mux
Enable IOMUX_CONFIG_SION for all I2C pin mux settings, otherwise
we will get erros when doing i2c operations.
error log like the following:
"
wait_for_sr_state: failed sr=81 cr=a0 state=2020
i2c_init_transfer: failed for chip 0xb retry=1
"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-05-19 15:13:24 +02:00
Tim Harvey
78c5a18087 arm: mx6: ddr: add pd_fast_exit flag to system information
DDR3 has a special Precharge power-down mode: fast-exit vs slow-exit.

In slow-exit mode the DLL is off but in some quiescent state that makes it easy
to turn on again in tXPDLL cycles (about 10tCK) vs the full tDLLK (512tCK).
In fast-exist mode the DLL is maintained such that it is ready again in about
3tCK.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-04-22 14:35:35 +02:00
Raul Cardenas
0200020bc2 imx6: Added DEK blob generator command
Freescale's SEC block has built-in Data Encryption
Key(DEK) Blob Protocol which provides a method for
protecting a DEK for non-secure memory storage.
SEC block protects data in a data structure called
a Secret Key Blob, which provides both confidentiality
and integrity protection.
Every time the blob encapsulation is executed,
a AES-256 key is randomly generated to encrypt the DEK.
This key is encrypted with the OTP Secret key
from SoC. The resulting blob consists of the encrypted
AES-256 key, the encrypted DEK, and a 16-bit MAC.

During decapsulation, the reverse process is performed
to get back the original DEK. A caveat to the blob
decapsulation process,  is that the DEK is decrypted
in secure-memory and can only be read by FSL SEC HW.
The DEK is used to decrypt data during encrypted boot.

Commands added
--------------
  dek_blob - encapsulating DEK as a cryptgraphic blob

Commands Syntax
---------------
  dek_blob src dst len

    Encapsulate and create blob of a len-bits DEK at
    address src and store the result at address dst.

Signed-off-by: Raul Cardenas <Ulises.Cardenas@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>

Signed-off-by: Ulises Cardenas <ulises.cardenas@freescale.com>

Signed-off-by: Ulises Cardenas-B45798 <Ulises.Cardenas@freescale.com>
2015-03-02 09:57:06 +01:00
Otavio Salvador
8359318b5e imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
This adds the DATA[4-7] and RST pin definitions.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-02-23 09:11:43 +01:00
Peng Fan
9c3de876a1 imx:mx6sl add I2c pad settings
A few pad settings are I2C1

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-23 09:11:38 +01:00
Peng Fan
1f516faa45 ARM: imx6: disable bandgap self-bias after boot
The self-bias circuit is used by the bandgap during startup.
Once the bandgap has stabilized, the self-bias circuit should
be disabled for best noise performance of analog blocks.
Also this bit should be disabled before the chip enters STOP mode or
when ever the regular bandgap is disabled.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
2015-02-17 10:42:53 +01:00
Ye.Li
e8cdeefc22 imx: mx6: Fixed AIPS3 base address issue
Should use AIPS3 configuration address 0x0227C000 to set AIPS3,
not the AIPS3 base address.
Additional, replace AIPS1_BASE_ADDR to AIPS3_ARB_BASE_ADDR to align with
AIPS1 and AIPS2, and resolve the AIPS3_ARB_BASE_ADDR undefine problem.

Signed-off-by: Ye.Li <B37916@freescale.com>
2015-02-10 12:48:49 +01:00
Peng Fan
1730af1bbd imx:mx6 update fuse_bank0_regs
Update fuse_bank0_regs structure according reference mannual.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-02-10 12:48:48 +01:00
Peng Fan
d9efd47c03 imx:mx6sx add dram io configure for mx6sx
Define two structure mx6sx_iomux_ddr_regs and mx6sx_iomux_grp_regs.
Add a new function mx6sx_dram_iocfg to configure dram io.

Since mx6sx only have one channel mmdc0, define a new empty macro MMDC1
to replace mmdc1->entry=value for mx6sx. And to other mx6 soc, MMDC1
effects as "mmdc1->entry=value".

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-01-22 09:55:47 +01:00
Peng Fan
b93ab2ee75 arm:mx6sx add QSPI support
Add QSPI support for mx6solox.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-12-31 14:52:32 +05:30
Tom Rini
fc9b0b8043 Merge branch 'master' of git://git.denx.de/u-boot-usb
Conflicts:
	board/freescale/mx6sxsabresd/mx6sxsabresd.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-12-11 18:40:49 -05:00
Stefan Roese
7731745c13 arm: mx6: Change defines ENET_xxMHz to ENET_xxMHZ (no CamelCase)
As checkpatch complaines about these camel-case defines, lets change
them to only use upper-case characters.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jon Nettleton <jon.nettleton@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-12-01 10:20:20 +01:00
Nikita Kiryanov
8d29cef588 arm: mx6: introduce disable_sata_clock
Implement disable_sata_clock for mx6 SoCs.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
2014-11-24 11:59:59 +01:00
Nitin Garg
cf202d268b mx6: clock: Add thermal clock enable function
Add api to check and enable pll3 as required
for thermal sensor driver.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
2014-11-21 15:18:47 +01:00
Fabio Estevam
573960aca5 mx6: add weim registers
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:30:19 +01:00
Fabio Estevam
32c81ea65c imx: consolidate set_chipselect_size function
Move MX5 specific set_chipselect_size function into generic i.MX part,
such that MX6 based boards are able to use this function as well.

While doing this the iomuxc gpr member needed to be consolidated between
MX5 and MX6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-20 10:30:19 +01:00
Peng Fan
3b9c1a5dc0 imx:mx6slevk add board level support for usb
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode

There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port has not ID pin set:
otg1 core <---> board otg port
otg2 core <---> board host port
In order to make host port work, board_usb_phy_mode return USB_INIT_HOST
to let host port work in host mode.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
2014-11-14 20:56:58 +01:00