Peng Fan e1c2d68b39 imx: mx6: ccm: Change the clock settings for i.MX6QP ... Since i.MX6QP changes some CCM registers, so modify the clocks settings to follow the hardware changes. In c files, use runtime check and discard #ifdef. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>		2015-08-02 10:43:45 +02:00
..
clock.h	imx: mx6 remove duplicated enable_cspi_clock	2015-07-10 09:35:53 +02:00
crm_regs.h	imx: mx6: ccm: Change the clock settings for i.MX6QP	2015-08-02 10:43:45 +02:00
gpio.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hab.h	iMX: adding parsing to hab_status command	2015-07-10 10:00:14 +02:00
imx-regs.h	imx: mx6 introuduce macro is_mx6dqp	2015-06-27 18:18:54 +02:00
iomux.h	pcie_imx: Add mx6solox support	2014-09-09 17:24:49 +02:00
mx6-ddr.h	arm: mx6: ddr: add pd_fast_exit flag to system information	2015-04-22 14:35:35 +02:00
mx6-pins.h	mx6sx: Add pin definitions	2014-07-10 15:29:16 +02:00
mx6dl-ddr.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mx6dl_pins.h	i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10	2014-07-10 15:23:56 +02:00
mx6q-ddr.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
mx6q_pins.h	imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK	2014-02-19 10:57:25 +01:00
mx6sl_pins.h	imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use	2015-02-23 09:11:43 +01:00
mx6sx-ddr.h	mx6: Add support for the mx6solox variant	2014-07-10 15:29:16 +02:00
mx6sx_pins.h	imx: mx6sx enable SION for i2c pin mux	2015-05-19 15:13:24 +02:00
mxc_hdmi.h	Merge git://git.denx.de/u-boot-arm	2013-07-31 11:30:38 +02:00
sys_proto.h	imx: add cpu type for i.MX6QP/DP	2015-08-02 10:42:48 +02:00