Commit graph

211 commits

Author SHA1 Message Date
Stephen Warren
eceb3f26f4 ARM: tegra: add GPIO initialization table function
The HW-defined procedure for booting Tegra requires that some pins be
set up as GPIOs immediately at boot in order to avoid glitches on those
pins, when the pinmux is programmed. Add a feature to the GPIO driver
which executes a GPIO configuration table. Board files will use this to
implement the correct HW initialization procedure.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-05-13 10:41:31 -07:00
Akshay Saraswat
f6ae1ca058 S5P: Exynos: Add GPIO pin numbering and rename definitions
This patch includes following changes :
* Adds gpio pin numbering support for EXYNOS SOCs.
  To have consistent 0..n-1 GPIO numbering the banks are divided
  into different parts where ever they have holes in them.

* Rename GPIO definitions from GPIO_... to S5P_GPIO_...
  These changes were done to enable cmd_gpio for EXYNOS and
  cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence
  getting a error during compilation.

* Adds support for name to gpio conversion in s5p_gpio to enable
  gpio command EXYNOS SoCs. Function has been added to asm/gpio.h
  to decode the input gpio name to gpio number.
  Example: SMDK5420 # gpio set gpa00

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-13 15:20:38 +09:00
Simon Glass
e2d8a714a7 sandbox: Convert GPIOs to use driver model
Convert sandbox over to use driver model GPIOs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-04 12:15:30 -05:00
Simon Glass
96495d90fe dm: Add GPIO support and tests
Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.

Tests are provided for the sandbox implementation, and are a sufficient
sanity check for basic operation.

The GPIO uclass understands the concept of named banks of GPIOs, with each
GPIO device providing a single bank. Within each bank the GPIOs are numbered
using an offset from 0 to n-1. For example a bank named 'b' with 20
offsets will provide GPIOs named b0 to b19.

Anonymous GPIO banks are also supported, and are just numbered without any
prefix.

Each time a GPIO driver is added to the uclass, the GPIOs are renumbered
accordinging, so there is always a global GPIO numbering order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:30 -05:00
Alexey Brodkin
1ace402239 sizes.h - consolidate for all architectures
Copied from Linux sources "include/linux/sizes.h" commit
413541dd66d51f791a0b169d9b9014e4f56be13c

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Tom Rini <trini@ti.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Stefan Roese <sr@denx.de>
[trini: Add bcm Kona platforms to the patch]
Signed-off-by: Tom Rini <trini@ti.com>
2014-03-04 12:15:01 -05:00
Darwin Rambo
24e5219754 gpio: kona: Add Kona gpio driver
Add support for the Kona GPIO controller found on Broadcom mobile SoCs.

Signed-off-by: Darwin Rambo <drambo@broadcom.com>
Reviewed-by: Steve Rae <srae@broadcom.com>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Tim Kryger <tkryger@linaro.org>
2014-02-22 19:30:27 +01:00
Przemyslaw Marczak
8475c869c3 s5p: gpio: change gpio coding method for s5p gpio.
Old s5p gpio coding method was not clean and was not working properly
for all parts and banks. New method is clean and easy to extend.

Gpio coding mask:
0x000000ff - pin number
0x00ffff00 - bank offset
0xff000000 - part number

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-03 15:36:14 +09:00
Albert ARIBAUD
a891601ce5 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	include/micrel.h

The conflict above was trivial, caused by four lines being
added in both branches with different whitepace.
2014-01-06 08:49:58 +01:00
Andreas Bießmann
9ecc922e75 at91: add new gpio pin definitions
This patch define new names for GPIO pins on at91 devices. Follow up patches
will convert the whole infrastructure to use these new definitions.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
2013-12-09 13:21:26 +01:00
Michael Heimpold
ac135f6699 mxs_gpio: fix the handling in gpio_direction_output()
Setting the direction and an output value should be done by
1) set the desired output value,
2) switch to output.

If this is done in the inverse order, there can be a glitch on
the GPIO line.

This patch fixes this by using the order as described above.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-11-13 10:09:09 +01:00
Viktar Palstsiuk
7d9ec6a0af Add support for SX151x SPI GPIO Expanders
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
2013-11-08 09:39:13 -05:00
Tom Rini
c0bb110b69 Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Easy to resolve conflict on the GPIO change.

Conflicts:
	arch/blackfin/cpu/Makefile

Signed-off-by: Tom Rini <trini@ti.com>
2013-11-04 09:28:08 -05:00
Steven Miao
cae4d0403c blackfin: Move machine specific gpio_port_t structure back to blackfin arch folder.
The gpio register mappings are different among blackfin processors.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-11-04 16:50:46 +08:00
Masahiro Yamada
710f1d3d5f drivers: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:01 -04:00
Albert ARIBAUD
4eef93da26 Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' 2013-09-04 11:50:25 +02:00
Bo Shen
39b787ecc5 gpio: atmel: add copyright and remove error header info
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Jens Scharsig <js_at_ng@scharsoft.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22 16:52:21 +02:00
Bo Shen
6edaea8705 gpio: atmel: add gpio common API support
add gpio common API support for gpio command

Signed-off-by: Bo Shen <voice.shen@atmel.com>
[fix unnecessary cast]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22 16:51:33 +02:00
Bo Shen
4bc9b7a560 gpio: atmel: fix code to use pointer for pio port
fix code to use pointer for pio port as the warning message suggested
remove the warning message

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-08-22 16:51:18 +02:00
Wolfgang Denk
bcd4d4eb2b SPDX-License-Identifier: fixing some problematic GPL-2.0 files
Unlike the other patches in this series so far, this commit fixes a
ambiguity in the license terms for some OMAP files:  the code was
originally derived from the Linux kernel sources, where it was clearly
marked as GPL-2.0 (i. e. without the "or later" part), but the U-Boot
version had a GPL-2.0+ file header added, apparently without
permission / relicensing from the original authors of the code.

Insert a GPL-2.0 SPDX-License-Identifier to fix this.

Signed-off-by: Wolfgang Denk <wd@denx.de>
cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Acked-by: Tom Rini <trini@ti.com>
2013-08-19 15:34:13 -04:00
Tom Rini
e20cc2ca15 Merge branch 'master' of git://88.191.163.10/u-boot-arm
Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.

Conflicts:
	arch/arm/include/asm/arch-am33xx/hardware.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-08-18 14:14:34 -04:00
Axel Lin
f218761743 gpio: pca953x: Use ARRAY_SIZE instead of reinventing it
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
2013-08-16 13:45:15 -04:00
Stefano Babic
326ea986ac Merge git://git.denx.de/u-boot-arm
Conflicts:
	board/freescale/mx6qsabrelite/Makefile
	board/freescale/mx6qsabrelite/mx6qsabrelite.c
	include/configs/mx6qsabrelite.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-07-31 11:30:38 +02:00
Axel Lin
2ced773a1a gpio: adi_gpio2: Unreserve gpio in special_gpio_free()
In special_gpio_free(), call unreserve() rather than reserve() to release gpio.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-07-31 16:56:03 +08:00
Dan Murphy
61c1775f16 gpio: tca642x: Add the tca642x gpio expander driver
Add the tca642x gpio expander driver

Datasheet:
http://www.ti.com/product/tca6424a

Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-07-30 09:21:42 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Dirk Behme
04c79cbd5f mxc_gpio: Correct the GPIO handling in gpio_direction_output()
Setting the direction and an output value should be done by

First, set the desired output value.

Then, switch to output.

If this is done in the inverse order, like at the moment,
there can be a glitch on the GPIO line while switching first
the old output value and aftwards the new one.

Fix this by inverting the order of the direction/set_value
calls.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-07-24 13:01:18 +02:00
Albert ARIBAUD
630aacb085 Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2013-07-10 20:40:47 +02:00
Axel Lin
87bd05d78f ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
The omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs.
These SoCs have different gpio count but currently omap_gpio driver uses hard
coded 192 which is wrong.

This patch fixes this issue by:
1. Move define of OMAP_MAX_GPIO to all arch/arm/include/asm/arch-omap*/gpio.h.
2. Update gpio bank settings and enable GPIO modules 7 & 8 clocks for OMAP5.

Thanks for Lubomir Popov to provide valuable comments to fix this issue.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Acked-by: Heiko Schocher <hs@denx.de>
2013-07-02 09:21:16 -04:00
Axel Lin
70125f3411 gpio: s5p_gpio: Call s5p_gpio_set_value() instead of open-code
Call s5p_gpio_set_value() to avoid code duplication.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-06-25 10:56:46 +09:00
Axel Lin
79a6fcf257 gpio: s3c2440_gpio: Fix wrong writel arguments
Current code had writel arguments the wrong way around, fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-06-25 10:54:09 +09:00
Sonic Zhang
da34aae5fb bfin: Move gpio support for bf54x and bf60x into the generic driver folder.
The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx.
A lot of machine macros are used to accomodate both code in one gpio driver.
This patch split the old gpio driver and move new gpio2 support to the generic
gpio driver folder.

- To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's
config header file.
- The gpio2 driver supports bf54x, bf60x and future ADI processors, while the
older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561.
- All blackfin specific gpio function names are replaced by the generic gpio APIs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13 16:30:27 +08:00
Michal Simek
4e779ad2e5 gpio: Add support for microblaze xilinx GPIO
Microblaze uses gpio which is connected to the system reset.
Currently gpio subsystem wasn't used for it.

Add gpio driver and change Microblaze reset logic to be done
via gpio subsystem.

There are various configurations which Microblaze can have
that's why gpio_alloc/gpio_alloc_dual(for dual channel)
function has been introduced and gpio can be allocated
dynamically.

Adding several gpios IP is also possible and supported.

For listing gpio configuration please use "gpio status" command

This patch also remove one compilation warning:
microblaze-generic.c: In function 'do_reset':
microblaze-generic.c:38:47: warning: operation on '*1073741824u'
 may be undefined [-Wsequence-point]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 11:20:08 +02:00
Tom Rini
76b40ab41e Merge u-boot/master into u-boot-ti/master
In master we had already taken a patch to fix the davinci GPIO code for
CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support
DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850).  Resolve these
conflicts manually and comment the #else/#endif lines for clarity.

Conflicts:
	arch/arm/include/asm/arch-davinci/gpio.h
	drivers/gpio/da8xx_gpio.c

Signed-off-by: Tom Rini <trini@ti.com>
2013-03-11 12:16:13 -04:00
Holger Hans Peter Freyther
03414ac45e gpio: Build the da8xx_gpio code for the davinci644x device
The differences include the number of GPIOs and that one is
not required to set the pinmux on request.

Signed-off-by: Holger Hans Peter Freyther <holger@freyther.de>
2013-02-20 08:52:41 -05:00
Tomas Novotny
b9f56698c7 da8xx: Add the missing pinmux for da830 to the gpio driver
The pinmux was generated from linux/arch/arm/mach-davinci/da830.c as of
kernel version 3.7.5. If the driver is used for the da850, then SoC
variant must be specified by CONFIG_SOC_DA850.

Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Cc: Tom Rini <trini@ti.com>
2013-02-18 13:48:03 -05:00
Albert ARIBAUD
79f3877794 Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
This required manual merging drivers/mtd/nand/Makefile
and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
2013-01-08 13:15:45 +01:00
Nikita Kiryanov
dcee1ab320 gpio: add gpio_is_valid() to omap_gpio API
Add gpio_is_valid() to omap_gpio API

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2012-12-10 12:45:35 -07:00
Minkyu Kang
2c601c7208 Merge branch 'master' of git://git.denx.de/u-boot into resolve
Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h
2012-12-10 14:13:27 +09:00
Bill Richardson
57be9172fc x86: gpio: Add additional GPIO banks to the ICH6 driver
We can generally trust the ICH to have GPIO Bank 0 (the first 32 pins) in the
same place across all versions. This change adds two more banks, for up to
96 GPIOS.

BUT:
- Not all chipsets have the same number of GPIOs
- Not all chipsets have the same number of GPIO banks
- Not all chipsets put the additional banks at the same offset from GPIOBASE
- There so many chipset variants that it's pretty much impossible to support
  them all, or even keep track of the new ones.

So, although this adds suppport for the additional banks that seem to work
for the particular variants of CougarPoint Mobile chipsets that we've tried,
there's no chance it will support everything Intel produces. Good luck.

Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Bill Richardson
55ae10f8db x86: gpio: Add GPIO driver for Intel ICH6 and later.
Implement <asm-generic/gpio.h> functions for Intel ICH6 and later.
Only GPIOs 0-31 are handled by this code.

Signed-off-by: Bill Richardson <wfrichar@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Łukasz Majewski
822593f028 gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices
Now proper GPIO parts numbering is handled at Samsung devices.
This fix is necessary for code using GPIO located at other banks
than first.

Test HW:
- Exynos4210 - Trats
- S5PC110 - goni

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15 21:08:18 +09:00
Troy Kisky
5ea6d7c8fc mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
Use CONFIG_MX6 when the particular processor
variant isn't important.

Reserve the use of CONFIG_MX6Q to
specifically test for quad cores variant.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-11-10 08:15:40 +01:00
Kim Phillips
8121d3c5cc drivers/gpio/mpc83xx_gpio.c: sparse fixes
mpc83xx_gpio.c:166:26: warning: non-ANSI function declaration of function 'mpc83xx_gpio_init_f'
mpc83xx_gpio.c:190:26: warning: non-ANSI function declaration of function 'mpc83xx_gpio_init_r'

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-11-04 11:00:37 -07:00
Tom Warren
150c24936b Tegra20: Move some include files to arch-tegra for sharing with Tegra30
The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h.
Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs
that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20'
'root' file.

All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Laurence Withers
633efe9c23 GPIO: pca953x: fix error reporting
Use the standard CMD_RET_* constants to clearly report errors from the
pca953x command. In addition, print error messages when I2C communication
fails.

Signed-off-by: Laurence Withers <lwithers@guralp.com>
2012-10-08 11:12:07 -07:00
Laurence Withers
d75bc03f45 GPIO: pca953x: fix spelling in help
Signed-off-by: Laurence Withers <lwithers@guralp.com>
2012-10-08 11:12:07 -07:00
Gabriel Huau
5d889ae79e ARM : Add GPIO Driver and IOMUX definition for S3C2440
It's now possible to use the gpio driver interface
for s3c2440. This patch add iomux definitions too.

Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
2012-10-03 10:50:20 +02:00
Tom Warren
29f3e3f248 Tegra: Change Tegra20 to Tegra in common code, prep for T30
Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate.
Convert tegra20_ source file and function names to tegra_, also.

Upcoming Tegra30 port will use common code/defines/names where possible.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2012-09-10 13:01:24 -07:00
trem
e71c39def6 gpio: add gpio api support to mx27 (v4)
The gpio api has been tested on an armadeus apf27.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:29 +02:00
Benoît Thébaudeau
5dafa4543c mxc: Make gpio_get_value() use PSR
gpio_get_value() should use PSR like Linux, not DR, because DR does not always
reflect the pin state, while PSR does. This is especially useful to detect a
short circuit on a GPIO pin configured as output, or to read the level of a pin
controlled by a non-GPIO IOMUX function.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01 14:58:28 +02:00
Allen Martin
00a2749d7b tegra20: rename tegra2 -> tegra20
This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-01 14:58:21 +02:00
Stephen Warren
efad6cf881 ARM: add basic support for the Broadcom BCM2835 SoC
This SoC is used in the Raspberry Pi, for example.

For more details, see:
http://www.broadcom.com/products/BCM2835
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf.

Initial support is enough to boot to a serial console, execute a minimal
set of U-Boot commands, download data over a serial port, and boot a
Linux kernel. No storage or network drivers are implemented.

GPIO driver originally by Vikram Narayanan <vikram186@gmail.com>
with many fixes from myself.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2012-09-01 14:58:21 +02:00
Mathieu J. Poirier
84dee301c3 snowball: Add support for ux500 based snowball board
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Conflicts:

	drivers/gpio/Makefile
2012-09-01 14:58:19 +02:00
Otavio Salvador
ddcf13b152 mxs: prefix register acessor macros with 'mxs' prefix
As the register accessing mode is the same for all i.MXS SoCs we ought
to use 'mxs' prefix intead of 'mx28'.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01 14:58:17 +02:00
Marek Vasut
308252adaf dm: Move OMAP GPIO driver to drivers/gpio/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-09-01 14:58:13 +02:00
Nobuhiro Iwamatsu
d764c5043d sh: Add support pin function control using GPIO
Renesas SH and R-Mobile set up device using PFC.
This provide the framework. Most codes were brought from linux kernel.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-08-08 10:24:41 +09:00
Stefan Roese
2cb06a4fda GPIO: Add SPEAr GPIO driver
Tested on x600 (SPEAr600).

Signed-off-by: Stefan Roese <sr@denx.de>
2012-07-07 14:07:42 +02:00
Bo Shen
2b3b1c668b ATMEL/PIO: Enable new feature of PIO on Atmel device
Enable new PIO feature supported by Atmel SoC.
Using CPU_HAS_PIO3 micro to enable PIO new feature.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-07-07 14:07:30 +02:00
Tom Warren
52a8b82074 gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*
In anticipation of Tegra3 support, continue removing/renaming
Tegra2-specific files. No functional changes (yet).
Updated copyrights to 2012.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-07 14:07:20 +02:00
Timo Ketola
eba1868be4 i.MX25: This architecture has a GPIO4 too
Signed-off-by: Timo Ketola <timo@exertus.fi>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:33 +02:00
Vikram Narayanan
d71c9c9fc0 imx: Return gpio_set_value in gpio_direction_output
Return gpio_set_value in gpio_direction_output.
Earlier it returned 0 and ignored gpio_set_value's return value.

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Vikram Narayanan
be28255462 imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
Use the defined GPIO_TO_PORT macro. Remove gpio >> 5 references.

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Vikram Narayanan
8d28c211f3 imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
Add GPIO_TO_PORT macro in the mxc_gpio.c driver

Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-04-16 14:53:59 +02:00
Robert Delien
b228e14e96 Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
This patch renames mx28_register to mx28_register_32 in order to
prepare for the introduction of an 8-bit register, mx28_register_8.

Signed-off-by: Robert Delien <robert@delien.nl>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
2012-03-26 23:09:24 +02:00
Simon Glass
8d30fcd9a1 sandbox: gpio: add basic driver for simulating GPIOs
This provides a way of simulating GPIOs by setting values which are seen
by the normal gpio_get/set_value() calls.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-12 11:03:42 -04:00
Joe Hershberger
4b56579388 mpc83xx: Add a GPIO driver for the MPC83XX family
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-01-09 20:10:33 -06:00
Joe Hershberger
365d607033 gpio: Replace ARM gpio.h with the common API in include/asm-generic
ARM boards should use the generic GPIO API
This means changing gpio to unsigned type
Remove the unused gpio_toggle() function which is not part of the API
Comment that free should not modify pin state

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>

fixed merge conflict in da8xx_gpio.c, tegra2_gpio.c, and
extended to the new mxs_gpio.c.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-01-09 20:10:32 -06:00
Jason Liu
c8bfe24fec i.mx: mxc_gpio: add the i.mx6q support
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2011-12-09 17:30:10 +01:00
Stephen Warren
5fac236a97 tegra2: Use new GPIO APIs in gpio_config_uart()
... rather than open-coding the register accesses.

However, gpio_request() typically stores the "label" parameter in a global
data structure. This causes problems when called from gpio_config_uart(),
since the code is running before relocation. To solve this, pass a NULL
string to gpio_request(), and modify gpio_request() not to touch the string
if it's NULL.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-12-09 17:30:08 +01:00
Anatolij Gustschin
3da597dbde drivers/gpio/da8xx_gpio.c: Fix build warning
Fix:
da8xx_gpio.c: In function 'gpio_toggle_value':
da8xx_gpio.c:208:23: warning: variable 'bank' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-09 10:54:38 +01:00
Robert Deliën
5a42cd33d5 M28: Fix OB1 bug in GPIO driver
This patch fixes a small off-by-one bug in the GPIO driver for the mxs platform that allowed the selection gpio pins of one bank more than the SoC actually has.

Signed-off-by: Robert Deliën <robert at delien.nl>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-06 23:59:40 +01:00
Wolfgang Denk
f9342e2c3e Merge branch 'sr@denx.de' of git://git.denx.de/u-boot-staging
* 'sr@denx.de' of git://git.denx.de/u-boot-staging:
  Makefile: Add the missing dependency for spl target
  gpio: Adapt PCA9698 to standard GPIO API
2011-11-21 22:11:05 +01:00
Wolfgang Denk
c829ff2e3d Merge branch 'master' of git://git.denx.de/u-boot-nios
* 'master' of git://git.denx.de/u-boot-nios:
  nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet().
  board/nios2-generic: Use altera_pio driver and remove board specific driver
  gpio: Add driver for Altera's PIO core
  nios2: Pseudo implement dcache_status/enable/disable()
2011-11-21 22:00:37 +01:00
Dirk Eibach
042f9f1062 gpio: Adapt PCA9698 to standard GPIO API
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Stefan Roese <sr@denx.de>
2011-11-18 14:04:25 +01:00
Marek Vasut
6b6440def8 iMX28: Add GPIO control
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
2011-11-11 11:36:57 +01:00
Joachim Foerster
03d67e1276 gpio: Add driver for Altera's PIO core
This driver may handle multiple PIO cores and thus needs to be
setup by calling the altera_pio_init() function within the early
board setup routine.

The driver comes with some extras, see below the copyleft header.

Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Tested-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2011-10-28 09:50:49 +08:00
Lei Wen
71f13a21dc gpio: mvmfp: reduce include platform file
Build pass with following config:
dkb_config
aspenite_config

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Lei Wen
a7efd719f4 ARM: kirkwood: reduce dependence of including platform file
For files like the drivers/serial/serial.c, it must include the
platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the
definition in the platform definition files.

Include the platform definition file in the config file, so that it
would decouple the dependence for the driver files.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27 21:56:33 +02:00
Dirk Eibach
486cad03be gpio: Add PCA9698 40-bit I2C I/O port
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2011-10-22 00:43:45 +02:00
Holger Brunck
e5afdf584c kw_gpio: fix error in kw_gpio_direction_input
The function kw_gpio_is_valid returns zero on success, so
adapt the error check accordingly.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Dieter Kiermaier <dk-arm-linux@gmx.de>
2011-10-17 22:25:33 +02:00
Ajay Bhargav
0c44229859 gpio: Add GPIO driver framework for Marvell SoCs
This patch adds generic GPIO driver framework support for Marvell SoCs.

To enable GPIO driver define CONFIG_MARVELL_GPIO and for GPIO commands
define CONFIG_CMD_GPIO in your board configuration file.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-09-30 22:00:52 +02:00
Wolfgang Denk
04e5ae7931 Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-09-11 21:24:09 +02:00
Łukasz Majewski
9f15bc0c1c i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
This patch adds support for software I2C for GONI and Universal C210 reference targets.
It adds support for access to GPIOs by number, not as it is present,
by bank and offset.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Cc: Heiko Schocher <hs@denx.de>
2011-09-04 11:36:15 +02:00
Stefano Babic
d8e0ca851b IMX: uniform GPIO interface using GPIO framework
IMX processors has a slightly different interface
to access GPIOs and do not make use of the provided GPIO
framework. The patch substitutes mxc_ specific
functions and make use of the API in asm/gpio.h

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04 11:36:11 +02:00
Łukasz Majewski
ef5d9eb925 gpio:samsung s5p_ suffix add for GPIO functions
This change is driven by need of general gpio_* functions,
which as their parameter are accepting the GPIO pin number, NOT
block and pin.

This makes the code alike to omap, and allows for using more
generic frameworks (e.g. software I2C).

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-09-03 22:40:47 +02:00
Laurence Withers
f517afd5df DA8xx: add generic GPIO driver
Add a generic GPIO driver for the DaVinci DA8xx processors. It is turned
on by defining CONFIG_DA8XX_GPIO and fulfills the generic GPIO interface
specified in <asm/gpio.h> . The driver has support for both manipulating
GPIO pins as well as automatically configuring the pin multiplexor
registers to set the pin function to GPIO.

Signed-off-by: Laurence Withers <lwithers@guralp.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-08-03 12:49:19 +02:00
Tom Warren
4e5ae09e56 GPIO: Tegra2: add GPIO driver for Tegra2
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-07-04 10:55:26 +02:00
Reinhard Meyer
86592f6059 AT91: change includes from asm/arch/io.h to asm/io.h
and remove the now unused asm/arch-at91/io.h

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18 07:56:51 +02:00
Reinhard Meyer
372f2783a7 AT91: fix related at91 driver files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2011-05-18 07:56:51 +02:00
Fabio Estevam
e53bcd947d gpio: imx: Fix return value on error
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-11 23:03:15 +02:00
Stefano Babic
8627111543 IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
As exception among the i.MX processors, the i.MX31 has headers
without general names (mx31-regs.h, mx31.h instead of imx-regs.h and
clock.h). This requires several nasty #ifdef in the drivers to
include the correct header. The patch cleans up the driver and
renames the header files as for the other i.MX processors.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27 19:38:05 +02:00
Lei Wen
a03774ed88 mvmfp: add MFP configuration support for PANTHEON
This patch adds the Multiple Function Pin configuration support for
Marvell PANTHEON SoCs

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-02-21 08:30:55 +01:00
Liu Hui-R64343
01643ec180 mxc_gpio: add support for MX53 processor
This patch add mxc_gpio support for Freescale MX53 processor

Signed-off-by: Jason Liu <r64343@freescale.com>
2011-02-02 00:54:42 +01:00
Chris Packham
5dec49ca22 pca953x: support 16-pin devices
This adds support for for the PCA9535/PCA9539 family of gpio devices which
have 16 output pins.

To let the driver know which devices are 16-pin it is necessary to define
CONFIG_SYS_I2C_PCA953X_WIDTH in your board config file. This is used to
create an array of {chip, ngpio} tuples that are used to determine the
width of a particular chip. For backwards compatibility it is assumed that
any chip not defined in CONFIG_SYS_I2C_PCA953X_WIDTH has 8 pins.

Acked-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2011-01-10 07:53:00 +01:00
Prafulla Wadaskar
e5f495d172 gpio: Add Multi-Function-Pin configuration driver for Marvell SoCs
Most of the Marvell SoCs has Multi Function Pin (MFP) configuration registers
For ex. ARMADA100.

These registers are programmed to expose the specific functionality
associated with respective SoC Pins

This driver provides configuration APIs,
using them, configuration need to be done in board specific code

for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality

int board_early_init_f(void)
{
        u32 mfp_cfg[] = {
                /* Console on UART1 */
                MFP107_UART1_RXD,
                MFP108_UART1_TXD,
                MFP_EOC         /*End of configureation*/
        };
        /* configure MFP's */
        mfp_config(mfp_cfg);
        return 0;
}

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-12-16 23:02:43 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Stefano Babic
c4ea142424 Use common function to set GPIOs for MX3 and MX5
The patch adds support for setting gpios to the
MX51 processor and change name to the corresponding
functions for MX31. In this way, it is possible to get rid
of nasty #ifdef switches related to the processor type.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-09-29 11:24:30 +02:00
Minkyu Kang
889a275d42 ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P
Use the same configuration around S5P SoCs.
(s5pc100, s5pc110, s5pc210 and so on)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-08-26 17:33:23 +09:00
Wolfgang Denk
47e26b1bf9 cmd_usage(): simplify return code handling
Lots of code use this construct:

	cmd_usage(cmdtp);
	return 1;

Change cmd_usage() let it return 1 - then we can replace all these
ocurrances by

	return cmd_usage(cmdtp);

This fixes a few places with incorrect return code handling, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-24 20:43:57 +02:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00
Minkyu Kang
ffb4b02554 s5pc1xx: gpio: bug fix at gpio_set_pull function
When set to PULL_NONE, gpio_set_pull function is returned without write the register.
This patch fixed it.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-06-14 18:15:20 -05:00
Stefano Babic
7d27cd08b4 MX31: add accessor function to get a gpio
The patch adds an accessor function to get the value of a gpio.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30 05:23:25 -05:00
Minkyu Kang
3bb6b037e8 SAMSUNG: make s5p common gpio functions
Because of s5pc1xx gpio is same as s5p seires SoC,
move gpio functions to drvier/gpio/
and modify structure's name from s5pc1xx_ to s5p_.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-30 05:23:23 -05:00
Jens Scharsig
ea8fbba731 add a new AT91 GPIO driver
* add a real AT91 GPIO driver instead of header inline code
* resolve the mixing of port and pins
* change board config files to use new driver
* add macros to gpio to realize backward compatibility

Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12 12:31:54 -06:00
Prafulla Wadaskar
beca04dd24 Kirkwood: Upgated licencing for files imported from linux source to GPLv2 or later
These are few files directly imported from Linux kernel source.
Those are not modifyed at all ar per strategy.
These files contains source with GPLv2 only
whereas u-boot expects GPLv2 or latter

These files are updated for the same from prior permission from original writes

Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-01-23 08:15:48 -06:00
Dieter Kiermaier
ec16441085 Kirkwood: add Marvell Kirkwood gpio driver
Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Tested-by: Heiko Schocher <hs@denx.de>
2009-07-23 00:19:28 +02:00
Wolfgang Denk
a89c33db96 General help message cleanup
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:16 +02:00
Guennadi Liakhovetski
b30de3cccf i.MX31: add a simple gpio driver
This is a minimal driver, so far only managing output. It will
be used by the mxc_spi.c driver.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-24 09:43:10 +01:00
Peter Tyser
2fb2604d5c Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:49:52 +01:00
Peter Tyser
62c3ae7c6e Standardize command usage messages with cmd_usage()
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:43:45 +01:00
Peter Tyser
e92739d34e Add support for PCA953x I2C gpio devices
Initial support for NXP's 4 and 8 bit I2C gpio expanders
(eg pca9537, pca9557, etc). The CONFIG_PCA953X define
enables support for the devices while the CONFIG_CMD_PCA953X
define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
define enables an 'info' sub-command which provides summary
information for the given pca953x device.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-19 18:11:49 -06:00