Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity

General help message cleanup

Browse source 
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk 2009-05-24 17:06:54 +02:00
parent 94796d8544
commit a89c33db96
165 changed files with 507 additions and 496 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
View file

@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcimage, 2, 0, do_vcimage,
"loads an image to Display",
"vcimage addr\n"
"vcimage addr"
);
/* EOF EB+MCF-EV123c */

2
board/ads5121/ads5121_diu.c
View file

@ -131,7 +131,7 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
"addr\n - display bmp at address 'addr'"
);

4
board/amcc/acadia/cmd_acadia.c
View file

@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
);
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
);

4
board/amcc/canyonlands/bootstrap.c
View file

@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
"<nand|nor> - strap to boot from NAND or NOR flash"
);

4
board/amcc/katmai/cmd_katmai.c
View file

@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
"program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
"wrclk [prom0|prom1] - program the serial device strap"
);

4
board/amcc/kilauea/cmd_pll.c
View file

@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
-----------------------------------------------\n"
);
-----------------------------------------------"
);
#endif /* CONFIG_CMD_EEPROM */

4
board/amcc/luan/luan.c
View file

@ -331,5 +331,5 @@ U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
"enable or disable L2 cache",
"[on, off]\n"
" - enable or disable L2 cache\n"
);
" - enable or disable L2 cache"
);

4
board/amcc/makalu/cmd_pll.c
View file

@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
-----------------------------------------------\n"
);
-----------------------------------------------"
);
#endif /* CONFIG_CMD_EEPROM */

4
board/amcc/sequoia/cmd_sequoia.c
View file

@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n"
);
"<nand|nor> - strap to boot from NAND or NOR flash"
);

16
board/amcc/taihu/lcd.c
View file

@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear,
"lcd clear display",
NULL
);
""
);
U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
"<string> - <string> to be displayed\n"
);
"<string> - <string> to be displayed"
);
U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
"<char> - <char> to be displayed\n"
);
"<char> - <char> to be displayed"
);
U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n"
" <dir> - 0=backward 1=forward\n"
);
" <dir> - 0=backward 1=forward"
);

8
board/amcc/taihu/taihu.c
View file

@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
"show status of switch 2",
NULL
);
""
);
static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
{
@ -134,8 +134,8 @@ U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
"make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
"\tled_no is 1 or 2\t"
);
"\tled_no is 1 or 2"
);
#define SPI_CS_GPIO0 0
#define SPI_SCLK_GPIO14 14

4
board/amcc/taihu/update.c
View file

@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]
U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom,
"update boot eeprom content",
NULL
);
""
);

14
board/amcc/taishan/lcd.c
View file

@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 0;
}
U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", "");
U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", "");
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
"<string> - <string> to be displayed\n");
"<string> - <string> to be displayed");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
"<char> - <char> to be displayed\n");
"<char> - <char> to be displayed");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward");
#if 0 /* test-only */
void set_phy_loopback_mode(void)
@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
"led test light on", NULL);
"led test light on", "");
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
"led test light off", NULL);
"led test light off", "");
#endif

6
board/amcc/taishan/showinfo.c
View file

@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
"Show PCIX bridge info", NULL);
"Show PCIX bridge info", "");
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
"Show PCIX Device info", NULL);
"Show PCIX Device info", "");
extern void show_reset_reg(void);
@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
"Show Reset REG info", NULL);
"Show Reset REG info", "");

2
board/amcc/taishan/update.c
View file

@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update bootstrap eeprom content", NULL);
"update bootstrap eeprom content", "");
#endif

2
board/amcc/yucca/cmd_yucca.c
View file

@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe,
"program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
"wrclk [prom0|prom1] - program the serial device strap"
);

10
board/amirix/ap1000/ap1000.c
View file

@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
" - Set config options.\n"
"\n"
"All values can be decimal or hex (hex preceded with 0x).\n"
"Only whole numbers are supported for external limits.\n");
"Only whole numbers are supported for external limits.");
#if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace,
"load fpga configuration from System ACE compact flash",
"N\n"
" - Load configuration N (0-7) from System ACE compact flash\n"
"loadace\n" " - loads default configuration\n");
"loadace\n" " - loads default configuration");
#endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
"N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n"
"swconfig\n" " - display software configuration byte\n");
"swconfig\n" " - display software configuration byte");
U_BOOT_CMD (pause, 2, 0, do_pause,
"sleep processor until any key is pressed with poll time of N seconds",
"N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n"
" - sleep processor until any key is pressed with poll time of 1 second\n");
" - sleep processor until any key is pressed with poll time of 1 second");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
"trigger a board reconfigure to the software selected configuration",
"\n"
" - trigger a board reconfigure to the software selected configuration\n");
" - trigger a board reconfigure to the software selected configuration");
int board_eth_init(bd_t *bis)
{

2
board/amirix/ap1000/powerspan.c
View file

@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
" - store contents of eeprom at address ADD\n"
"eeprom p ADD\n"
" - put data stored at address ADD into the eeprom\n"
"eeprom d\n" " - return eeprom to default contents\n");
"eeprom d\n" " - return eeprom to default contents");
unsigned int PowerSpanRead (unsigned int theOffset)
{

6
board/barco/barco.c
View file

@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
"\n"
""
);
U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
"\n"
""
);
U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
"\n"
""
);
/*
* We are not using serial communication, so just provide empty functions

23
board/bc3450/cmd_bc3450.c
View file

@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip,
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
" - \"Config 1\" is the LSB\n");
" - \"Config 1\" is the LSB");
/*
@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (buz, 2, 1, cmd_buz,
"turns buzzer on/off",
"\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
"\n" "buz <on/off>\n" " - turns the buzzer on or off");
#endif /* CONFIG_BC3450_BUZZER */
@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp,
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
"fp <on/off>\n" " - turns the whole display on/off\n"
"fp <on/off>\n" " - turns the whole display on/off"
#ifdef CONFIG_BC3450_CRT
"\n"
"fp crt <on/off>\n"
" - enables/disables the crt output (debug only)\n"
" - enables/disables the crt output (debug only)"
#endif /* CONFIG_BC3450_CRT */
);
/*
* temp - DS1620 thermometer
*/
@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (temp, 3, 1, cmd_temp,
"print current temperature",
"\n" "temp\n" " - print current temperature\n");
"\n" "temp\n" " - print current temperature");
#ifdef CONFIG_BC3450_CAN
/*
@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
"test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n"
"test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n"
#endif /* CONFIG_BC3450_CAN */
"test unit-off\n"
" - turns off the BC3450 unit\n"
" WARNING: Unsaved environment variables will be lost!\n");
"test unit-off\n"
" - turns off the BC3450 unit\n"
" WARNING: Unsaved environment variables will be lost!"
);
#endif

4
board/bf537-stamp/cmd_bf537led.c
View file

@ -33,7 +33,7 @@
"led <number> <action>\n" \
" <number> - Index (0-5) of LED to change, or \"all\"\n" \
" <action> - Must be one of:\n" \
" on off toggle\n"
" on off toggle"
/* Number of LEDs supported by the board */
#define NUMBER_LEDS 6
@ -191,7 +191,7 @@ void set_led_state(int index, int state)
/* Display usage information */
void show_cmd_usage()
{
printf("Usage:\n%s", USAGE_LONG);
printf("Usage:\n%s\n", USAGE_LONG);
}
/* Register information for u-boot to find this command */

2
board/cm5200/cmd_cm5200.c
View file

@ -443,6 +443,6 @@ U_BOOT_CMD(
"fkt rs232 number\n"
" - Test RS232 (loopback plug(s) for RS232 required)\n"
"fkt usb\n"
" - Test USB communication\n"
" - Test USB communication"
);
#endif /* CONFIG_CMD_BSP */

2
board/delta/delta.c
View file

@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
NULL
""
);
#endif /* DELTA_CHECK_KEYBD */

13
board/esd/ar405/ar405.c
View file

@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
"Test digital in-/output",
NULL
);
""
);
#define ERROR_DELTA 256
@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
"Test analog in-/output",
NULL
);
""
);
int counter = 0;
@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
"Test incremental encoder inputs",
NULL
);
""
);
#endif

5
board/esd/cms700/cms700.c
View file

@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
/* ------------------------------------------------------------------------- */

2
board/esd/common/auto_update.c
View file

@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
autoupd, 1, 1, auto_update,
"Automatically update images",
NULL
""
);
#endif /* CONFIG_AUTO_UPDATE */

4
board/esd/common/cmd_loadpci.c
View file

@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci bootcmd and boot it",
NULL
);
""
);
#endif

2
board/esd/common/lcd.c
View file

@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp,
"display BMP image",
"<imageAddr> - display image\n"
"<imageAddr> - display image"
);

2
board/esd/common/xilinx_jtag/micro.c
View file

@ -1869,4 +1869,4 @@ U_BOOT_CMD(
cpld, 2, 1, do_cpld,
"program onboard CPLD",
"<xsvf-addr>"
);
);

4
board/esd/cpci2dp/cpci2dp.c
View file

@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL
);
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

12
board/esd/cpci405/cpci405.c
View file

@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
"Read 1-write ID",
NULL
);
""
);
#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */
#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */
@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
"Update IP-Address with Backplane IP-Address",
NULL
);
""
);
/*
* Set and print backplane ip...
@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
"Write Backplane IP-Address",
NULL
);
""
);
#endif /* CONFIG_CPCI405AB */

4
board/esd/cpci5200/cpci5200.c
View file

@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(writepci, 3, 1, do_writepci,
"Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
"<addr> <size>\n"
""
);

4
board/esd/cpci750/cpci750.c
View file

@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
show_config, 1, 1, do_show_config,
"Show Marvell strapping register",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
);
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)"
);

2
board/esd/dasa_sim/cmd_dasa_sim.c
View file

@ -230,7 +230,7 @@ U_BOOT_CMD(
pci9054, 3, 1, do_pci9054,
"PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n"
"pci9054 update - updates EEPROM with default values\n"
"pci9054 update - updates EEPROM with default values"
);
/* ------------------------------------------------------------------------- */

33
board/esd/du440/du440.c
View file

@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dcf77, 1, 1, do_dcf77,
"Check DCF77 receiver",
NULL
);
""
);
/*
* initialize USB hub via I2C1
@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hubinit, 1, 1, do_hubinit,
"Initialize USB hub",
NULL
);
""
);
#endif /* CONFIG_I2C_MULTI_BUS */
#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom,
"setup boot eeprom",
NULL
);
""
);
#if defined(CONFIG_SYS_EEPROM_WREN)
/*
@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
static int got_pldirq;
@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq,
"Wait for power change interrupt",
NULL
);
""
);
/*
* initialize DVI panellink transmitter
@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dviinit, 1, 1, do_dviinit,
"Initialize DVI Panellink transmitter",
NULL
);
""
);
/*
* TODO: 'time' command might be useful for others as well.
@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time,
"run command and output execution time",
NULL
);
""
);
extern void video_hw_rectfill (
unsigned int bpp, /* bytes per pixel */
@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
"demo",
NULL
);
""
);

5
board/esd/hh405/hh405.c
View file

@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

4
board/esd/ocrtc/cmd_ocrtc.c
View file

@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdevice, 1, 1, do_setdevice,
"Set device number on pci adapter boards",
NULL
""
);
@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdevice, 1, 1, do_getdevice,
"Get device number and set slot env variable",
NULL
""
);
#endif

2
board/esd/pci405/cmd_pci405.c
View file

@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci-image and boot it",
NULL
""
);
#endif

4
board/esd/pci405/pci405.c
View file

@ -381,5 +381,5 @@ U_BOOT_CMD(
"wpeeprom 1\n"
" - enable I2C EEPROM write protection\n"
"wpeeprom 0\n"
" - disable I2C EEPROM write protection\n"
);
" - disable I2C EEPROM write protection"
);

10
board/esd/pf5200/pf5200.c
View file

@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return (0);
}
U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", "");
int phypower(int flag)
{
@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(phypower, 2, 2, do_phypower,
"Switch power of ethernet phy", NULL);
"Switch power of ethernet phy", "");
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
"Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n");
"Write some data to pcibus",
"<addr> <size>\n"
""
);

5
board/esd/plu405/plu405.c
View file

@ -333,6 +333,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

35
board/esd/pmc440/cmd_pmc440.c
View file

@ -99,8 +99,8 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
waithci, 1, 1, do_waithci,
"Wait for host control interrupt",
NULL
);
""
);
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
{
@ -266,8 +266,8 @@ U_BOOT_CMD(
" - with 'wait' argument: interrupt driven read from all fifos\n"
" - with 'read' argument: read current contents from all fifos\n"
" - with 'write' argument: write 'data' 'cnt' times to "
"'fifo' or 'address'\n"
);
"'fifo' or 'address'"
);
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@ -338,7 +338,7 @@ U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom,
"setup bootstrap eeprom",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
);
);
#if defined(CONFIG_PRAM)
#include <environment.h>
@ -400,8 +400,8 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
painit, 1, 1, do_painit,
"prepare PciAccess system",
NULL
);
""
);
#endif /* CONFIG_PRAM */
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@ -412,8 +412,8 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
selfreset, 1, 1, do_selfreset,
"assert self-reset# signal",
NULL
);
""
);
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@ -449,8 +449,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
resetout, 2, 1, do_resetout,
"assert PMC-RESETOUT# signal",
NULL
);
""
);
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@ -481,8 +481,8 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inta, 2, 1, do_inta,
"Assert/Deassert or query INTA# state in non-monarch mode",
NULL
);
""
);
/* test-only */
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@ -514,8 +514,8 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
pmm, 2, 1, do_pmm,
"Setup pmm[1] registers",
"<pciaddr> (pciaddr will be aligned to 256MB)\n"
);
"<pciaddr> (pciaddr will be aligned to 256MB)"
);
#if defined(CONFIG_SYS_EEPROM_WREN)
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@ -549,8 +549,9 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return state;
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
#endif /* CONFIG_CMD_BSP */

24
board/esd/tasreg/tasreg.c
View file

@ -250,8 +250,8 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iploop, 2, 1, do_iploop,
"i2c probe loop <addr>",
NULL
);
""
);
/*
*/
@ -303,8 +303,8 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
codec, 1, 1, do_codec,
"Enable codec",
NULL
);
""
);
/*
*/
@ -336,8 +336,8 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
saa, 5, 1, do_saa,
"Write to SAA1064 <addr> <instr> <cntrl> <data>",
NULL
);
""
);
/*
*/
@ -375,8 +375,8 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iwrite, 6, 1, do_iwrite,
"Write n bytes to I2C-device",
"addr cnt data0 ... datan\n"
);
"addr cnt data0 ... datan"
);
/*
*/
@ -407,8 +407,8 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iread, 3, 1, do_iread,
"Read from I2C <addr> <cnt>",
NULL
);
""
);
/*
*/
@ -445,6 +445,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ireadl, 2, 1, do_ireadl,
"Read-loop from I2C <addr>",
NULL
);
""
);
#endif

5
board/esd/voh405/voh405.c
View file

@ -392,6 +392,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
NULL);
"Enable / disable / query EEPROM write access",
""
);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

4
board/evb64260/zuma_pbb.c
View file

@ -204,19 +204,17 @@ U_BOOT_CMD(
zinit, 1, 0, do_zuma_init_pbb,
"init zuma pbb",
"\n"
" - init zuma pbb\n"
);
U_BOOT_CMD(
zdtest, 3, 1, do_zuma_test_dma,
"run dma test",
"[cmd [count]]\n"
" - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n"
" - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes"
);
U_BOOT_CMD(
zminit, 1, 0, do_zuma_init_mbox,
"init zuma mbox",
"\n"
" - init zuma mbox\n"
);
#endif

28
board/freescale/common/pixis.c
View file

@ -279,9 +279,10 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
}
U_BOOT_CMD(
diswd, 1, 0, pixis_disable_watchdog_cmd,
"Disable watchdog timer",
NULL);
diswd, 1, 0, pixis_disable_watchdog_cmd,
"Disable watchdog timer",
""
);
#ifdef CONFIG_PIXIS_SGMII_CMD
int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@ -343,14 +344,15 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
"pixis_set_sgmii"
" - Enable or disable SGMII mode for a given TSEC \n",
"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
" TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
" on - enables SGMII\n"
" off - disables SGMII\n"
" switch - use switch settings\n");
pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
"pixis_set_sgmii"
" - Enable or disable SGMII mode for a given TSEC \n",
"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
" TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
" on - enables SGMII\n"
" off - disables SGMII\n"
" switch - use switch settings"
);
#endif
/*
@ -544,5 +546,5 @@ U_BOOT_CMD(
" pixis_reset [altbank]\n"
" pixis_reset altbank wd\n"
" pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
" pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
);
" pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
);

4
board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
View file

@ -140,8 +140,8 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n"
);
"addr\n - display bmp at address 'addr'"
);
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)

6
board/g2000/g2000.c
View file

@ -186,7 +186,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpebc, 1, 1, do_dumpebc,
"Dump all EBC registers",
NULL
""
);
@ -208,7 +208,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpdcr, 1, 1, do_dumpdcr,
"Dump all DCR registers",
NULL
""
);
@ -272,6 +272,6 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpspr, 1, 1, do_dumpspr,
"Dump all SPR registers",
NULL
""
);
#endif

4
board/hymod/bsp.c
View file

@ -297,7 +297,7 @@ U_BOOT_CMD(
"fpga info\n"
" - print information about the Hymod FPGA, namely the\n"
" memory addresses at which the four FPGA local bus\n"
" address spaces appear in the physical address space\n"
" address spaces appear in the physical address space"
);
/* ------------------------------------------------------------------------- */
int
@ -340,7 +340,7 @@ U_BOOT_CMD(
"[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n"
" Note: the EEPROM write enable jumper must be installed\n"
" Note: the EEPROM write enable jumper must be installed"
);
/* ------------------------------------------------------------------------- */

10
board/inka4x0/inkadiag.c
View file

@ -439,14 +439,14 @@ static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
cmd_tbl_t cmd_inkadiag_sub[] = {
U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input",
"<drawer1|drawer2|other> [value] - get or set specified signal\n"),
"<drawer1|drawer2|other> [value] - get or set specified signal"),
U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port",
"<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n"
"and baudrate with msg\n"),
"and baudrate with msg"),
U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer",
"<period> <freq> - turn buzzer on for period ms with freq hz\n"),
"<period> <freq> - turn buzzer on for period ms with freq hz"),
U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help",
"[command] - get help for command\n"),
"[command] - get help for command"),
};
static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag,
@ -483,7 +483,7 @@ U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag,
"inkadiag - inka diagnosis\n",
"[inkadiag what ...]\n"
" - perform a diagnosis on inka hardware\n"
"'inkadiag' performs hardware tests.\n\n");
"'inkadiag' performs hardware tests.");
/* Relocate the command table function pointers when running in RAM */
int inkadiag_init_r (void) {

4
board/keymile/common/keymile_hdlc_enet.c
View file

@ -591,7 +591,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
U_BOOT_CMD(
stest, 1, 1, hdlc_enet_stest,
"simple send test for hdlc_enet",
"no arguments\n"
""
);
/* simple receive test routine */
int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
@ -613,7 +613,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
U_BOOT_CMD(
rtest, 1, 1, hdlc_enet_rtest,
"simple receive test for hdlc_enet",
"no arguments\n"
""
);
#endif

6
board/lwmon/lwmon.c
View file

@ -853,7 +853,7 @@ U_BOOT_CMD(
pic, 4, 1, do_pic,
"read and write PIC registers",
"read reg - read PIC register `reg'\n"
"pic write reg val - write value `val' to PIC register `reg'\n"
"pic write reg val - write value `val' to PIC register `reg'"
);
/***********************************************************************
@ -911,7 +911,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
NULL
""
);
/* Read and set LSB switch */
@ -985,7 +985,7 @@ U_BOOT_CMD(
"check and set LSB switch",
"on - switch LSB on\n"
"lsb off - switch LSB off\n"
"lsb - print current setting\n"
"lsb - print current setting"
);
#endif

2
board/lwmon5/kbd.c
View file

@ -433,7 +433,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
NULL
""
);
/*----------------------------- Utilities -----------------------------*/

2
board/lwmon5/lwmon5.c
View file

@ -487,7 +487,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepromwp, 2, 0, do_eeprom_wp,
"eeprom write protect off/on",
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n"
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
);
#if defined(CONFIG_VIDEO)

6
board/micronas/vct/smc_eeprom.c
View file

@ -384,11 +384,11 @@ static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
}
U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all,
"smcee - Erase content of SMC EEPROM\n",);
"smcee - Erase content of SMC EEPROM",);
U_BOOT_CMD(smced, 1, 0, do_eeprom_dump,
"smced - Dump content of SMC EEPROM\n",);
"smced - Dump content of SMC EEPROM",);
U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac,
"smcew - Write MAC address to SMC EEPROM\n",
"aa:bb:cc:dd:ee:ff new mac address\n");
"aa:bb:cc:dd:ee:ff new mac address");

2
board/mpl/mip405/cmd_mip405.c
View file

@ -60,7 +60,7 @@ U_BOOT_CMD(
"mip405 flash mps - updates U-Boot with image from MPS\n"
"mip405 info - displays board information\n"
"mip405 led <on> - switches LED on (on=1) or off (on=0)\n"
"mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n"
"mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever"
);
/* ------------------------------------------------------------------------- */

2
board/mpl/pati/cmd_pati.c
View file

@ -443,7 +443,7 @@ U_BOOT_CMD(
" era - erase PCI EEPROM (write all word to 0xffff)\n"
" reload- Reload PCI Bridge with EEPROM Values\n"
" NOTE: <addr> must start on word boundary\n"
" <offset> and <size> must be even byte values\n"
" <offset> and <size> must be even byte values"
);
/* ------------------------------------------------------------------------- */

2
board/mpl/pip405/cmd_pip405.c
View file

@ -63,7 +63,7 @@ U_BOOT_CMD(
"PIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
"pip405 flash mps - updates U-Boot with image from MPS\n"
"pip405 flash mps - updates U-Boot with image from MPS"
);
/* ------------------------------------------------------------------------- */

2
board/mpl/vcma9/cmd_vcma9.c
View file

@ -174,5 +174,5 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcma9, 6, 1, do_vcma9,
"VCMA9 specific commands",
"flash mem [SrcAddr]\n - updates U-Boot with image in memory\n"
"flash mem [SrcAddr]\n - updates U-Boot with image in memory"
);

2
board/pcippc2/pcippc2.c
View file

@ -239,7 +239,7 @@ U_BOOT_CMD(
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status\n"
"wd - print current status"
);
#endif

4
board/pcs440ep/pcs440ep.c
View file

@ -763,7 +763,7 @@ U_BOOT_CMD(
" 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n"
" 0x08 = DIAG 4 on\n"
" > 0x100 set the LED, who are on, to state blinking\n"
" > 0x100 set the LED, who are on, to state blinking"
);
#if defined(CONFIG_SHA1_CHECK_UB_IMG)
@ -823,7 +823,7 @@ U_BOOT_CMD(
"calculate the SHA1 Sum",
"address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
" -c check the U-Boot image in flash\n"
" -c check the U-Boot image in flash"
);
#endif

6
board/pn62/cmd_pn62.c
View file

@ -54,8 +54,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
led , 3, 1, do_led,
"set LED 0..11 on the PN62 board",
"i fun\n"
" - set 'i'th LED to function 'fun'\n"
"i fun"
" - set 'i'th LED to function 'fun'"
);
/*
@ -177,7 +177,7 @@ U_BOOT_CMD(
loadpci, 2, 1, do_loadpci,
"load binary file over PCI",
"[addr]\n"
" - load binary file over PCI to address 'addr'\n"
" - load binary file over PCI to address 'addr'"
);
#endif

2
board/prodrive/pdnb3/pdnb3.c
View file

@ -228,7 +228,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fpga, 2, 0, do_fpga,
"boot FPGA",
"address size\n - boot FPGA with gzipped image at <address>\n"
"address size\n - boot FPGA with gzipped image at <address>"
);
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)

2
board/pxa255_idp/pxa_idp.c
View file

@ -129,7 +129,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
"custom IDP command",
"no args at this time\n"
"no args at this time"
);
#endif

2
board/r360mpi/r360mpi.c
View file

@ -415,5 +415,5 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
NULL
""
);

4
board/renesas/sh7785lcr/rtl8169_mac.c
View file

@ -325,7 +325,7 @@ U_BOOT_CMD(
setmac, 2, 1, do_set_mac,
"write MAC address for RTL8110SCL",
"\n"
"setmac <mac address> - write MAC address for RTL8110SCL\n"
"setmac <mac address> - write MAC address for RTL8110SCL"
);
int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@ -344,5 +344,5 @@ U_BOOT_CMD(
printmac, 1, 1, do_print_mac,
"print MAC address for RTL8110",
"\n"
" - print MAC address for RTL8110\n"
" - print MAC address for RTL8110"
);

2
board/renesas/sh7785lcr/selfcheck.c
View file

@ -168,5 +168,5 @@ U_BOOT_CMD(
"hwtest sm107 - output SM107 version\n"
"hwtest net - check RTL8110 ID\n"
"hwtest sata - check SiI3512 ID\n"
"hwtest pci - output PCI slot device ID\n"
"hwtest pci - output PCI slot device ID"
);

2
board/renesas/sh7785lcr/sh7785lcr.c
View file

@ -82,6 +82,6 @@ U_BOOT_CMD(
pmb, 1, 1, do_pmb,
"pmb - PMB setting\n",
"\n"
" - PMB setting for all SDRAM mapping\n"
" - PMB setting for all SDRAM mapping"
);
#endif

2
board/sandburst/common/ppc440gx_i2c.c
View file

@ -501,7 +501,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iprobe1, 1, 1, do_i2c1_probe,
"probe to discover valid I2C chip addresses",
"\n -discover valid I2C chip addresses\n"
""
);
#endif /* CONFIG_I2C_BUS1 */

4
board/sandburst/karef/karef.c
View file

@ -611,7 +611,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
"Set environment to factory defaults", NULL);
"Set environment to factory defaults", "");
U_BOOT_CMD(karecover, 1, 1, karefRecover,
"Set environment to allow for fs recovery", NULL);
"Set environment to allow for fs recovery", "");

4
board/sandburst/metrobox/metrobox.c
View file

@ -577,7 +577,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
"Set environment to factory defaults", NULL);
"Set environment to factory defaults", "");
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
"Set environment to allow for fs recovery", NULL);
"Set environment to allow for fs recovery", "");

2
board/siemens/common/fpga.c
View file

@ -295,7 +295,7 @@ U_BOOT_CMD(
"access FPGA(s)",
"fpga status [name] - print FPGA status\n"
"fpga reset [name] - reset FPGA\n"
"fpga load [name] addr - load FPGA configuration data\n"
"fpga load [name] addr - load FPGA configuration data"
);
#endif

8
board/siemens/pcu_e/pcu_e.c
View file

@ -404,10 +404,10 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD (puma, 4, 1, do_puma,
"access PUMA FPGA",
"status - print PUMA status\n"
"puma load addr len - load PUMA configuration data\n");
"access PUMA FPGA",
"status - print PUMA status\n"
"puma load addr len - load PUMA configuration data"
);
#endif
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */

2
board/ssv/common/cmd_sled.c
View file

@ -157,6 +157,6 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (sled, 3, 0, do_sled,
"check and set status led",
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink");
#endif
#endif /* CONFIG_STATUS_LED */

2
board/ssv/common/wd_pio.c
View file

@ -154,7 +154,7 @@ U_BOOT_CMD(
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status\n"
"wd - print current status"
);
#endif
#endif /* CONFIG_HW_WATCHDOG */

13
board/tqc/tqm5200/cmd_stk52xx.c
View file

@ -1201,21 +1201,21 @@ U_BOOT_CMD(
"sound square [duration] [freq] [channel]\n"
" - generate squarewave for 'duration' ms with frequency 'freq'\n"
" on left \"l\" or right \"r\" channel\n"
"pcm1772 reg val\n"
"pcm1772 reg val"
);
U_BOOT_CMD(
wav , 3, 1, cmd_wav,
"play wav file",
"[addr] [bytes]\n"
" - play wav file at address 'addr' with length 'bytes'\n"
" - play wav file at address 'addr' with length 'bytes'"
);
U_BOOT_CMD(
beep , 2, 1, cmd_beep,
"play short beep",
"[channel]\n"
" - play short beep on \"l\"eft or \"r\"ight channel\n"
" - play short beep on \"l\"eft or \"r\"ight channel"
);
#endif /* CONFIG_STK52XX || CONFIG_FO300 */
@ -1228,10 +1228,11 @@ U_BOOT_CMD(
"fkt can\n"
" - loopback plug for X83 required\n"
"fkt rs232 number\n"
" - loopback plug(s) for X2 required\n"
" - loopback plug(s) for X2 required"
#ifndef CONFIG_TQM5200S
"\n"
"fkt backlight on/off\n"
" - switch backlight on or off\n"
" - switch backlight on or off"
#endif /* !CONFIG_TQM5200S */
);
#elif defined(CONFIG_FO300)
@ -1241,7 +1242,7 @@ U_BOOT_CMD(
"fkt can\n"
" - loopback plug for X16/X29 required\n"
"fkt rs232 number\n"
" - loopback plug(s) for X21/X22 required\n"
" - loopback plug(s) for X21/X22 required"
);
#endif
#endif

4
board/tqc/tqm5200/cmd_tb5200.c
View file

@ -91,13 +91,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
led , 2, 1, cmd_led,
"switch status LED on or off",
"on/off\n"
"on/off"
);
U_BOOT_CMD(
backlight , 2, 1, cmd_backlight,
"switch backlight on or off",
"on/off\n"
"on/off"
);
#endif /* CONFIG_STK52XX */

2
board/tqc/tqm8272/tqm8272.c
View file

@ -867,7 +867,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hwib, 1, 1, do_hwib_dump,
"dump HWIB'",
"\n"
""
);
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE

12
board/trab/cmd_trab.c
View file

@ -262,7 +262,7 @@ U_BOOT_CMD(
"\n"
" - start burn-in test application\n"
" The burn-in test could took a while to finish!\n"
" The content of the onboard EEPROM is modified!\n"
" The content of the onboard EEPROM is modified!"
);
@ -295,7 +295,7 @@ U_BOOT_CMD(
"read dip switch on TRAB",
"\n"
" - read state of dip switch (S1) on TRAB board\n"
" read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
" read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\""
);
@ -323,7 +323,7 @@ U_BOOT_CMD(
vcc5v, 1, 1, do_vcc5v,
"read VCC5V on TRAB",
"\n"
" - read actual value of voltage VCC5V\n"
" - read actual value of voltage VCC5V"
);
@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
c_temp, 1, 1, do_contact_temp,
"read contact temperature on TRAB",
"\n"
""
" - reads the onboard temperature (=contact temperature)\n"
);
@ -401,7 +401,7 @@ U_BOOT_CMD(
"print burn in status on TRAB",
"\n"
" - prints the status variables of the last burn in test\n"
" stored in the onboard EEPROM on TRAB board\n"
" stored in the onboard EEPROM on TRAB board"
);
static int read_dip (void)
@ -890,7 +890,7 @@ U_BOOT_CMD(
"delay\n"
" - contact temperature [1/100 C] is printed endlessly to console\n"
" <delay> specifies the seconds to wait between two measurements\n"
" For each measurment a timestamp is printeted\n"
" For each measurment a timestamp is printeted"
);
#endif

2
board/trab/trab.c
View file

@ -323,7 +323,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
NULL
""
);
#ifdef CONFIG_MODEM_SUPPORT

3
board/trizepsiv/eeprom.c
View file

@ -81,4 +81,5 @@ U_BOOT_CMD(
"\tdm9000ee read \n"
"\tword:\t\t00-02 : MAC Address\n"
"\t\t\t03-07 : DM9000 Configuration\n"
"\t\t\t08-63 : User data\n");
"\t\t\t08-63 : User data"
);

2
board/w7o/cmd_vpd.c
View file

@ -60,7 +60,7 @@ U_BOOT_CMD(
vpd, 2, 1, do_vpd,
"Read Vital Product Data",
"[dev_addr]\n"
" - Read VPD Data from default address, or device address 'dev_addr'.\n"
" - Read VPD Data from default address, or device address 'dev_addr'."
);
#endif

2
board/zeus/update.c
View file

@ -99,7 +99,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD (
update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update boot eeprom content",
NULL
""
);
#endif

4
board/zeus/zeus.c
View file

@ -328,7 +328,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdef, 4, 1, do_set_default,
"write board-specific values to EEPROM (ethaddr...)",
"ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
"ethaddr eth1addr serial#\n - write board-specific values to EEPROM"
);
static inline int sw_reset_pressed(void)
@ -419,7 +419,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD (
chkreset, 1, 1, do_chkreset,
"Check for status of SW-reset button and act accordingly",
NULL
""
);
#if defined(CONFIG_POST)

7
common/cmd_ambapp.c
View file

@ -273,6 +273,7 @@ int ambapp_init_reloc(void)
}
U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print,
"list AMBA Plug&Play information",
"ambapp\n"
" - lists AMBA (AHB & APB) Plug&Play devices present on the system\n");
"list AMBA Plug&Play information",
"ambapp\n"
" - lists AMBA (AHB & APB) Plug&Play devices present on the system"
);

2
common/cmd_bdinfo.c
View file

@ -384,5 +384,5 @@ static void print_str(const char *name, const char *str)
U_BOOT_CMD(
bdinfo, 1, 1, do_bdinfo,
"print Board Info structure",
NULL
""
);

16
common/cmd_bedbug.c
View file

@ -108,7 +108,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
"disassemble memory",
"ds <address> [# instructions]\n");
"ds <address> [# instructions]");
/* ======================================================================
* Entry point from the interpreter to the assembler. Assembles
@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_asm */
U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
"assemble memory", "as <address>\n");
"assemble memory", "as <address>");
/* ======================================================================
* Used to set a break point from the interpreter. Simply calls into the
@ -181,7 +181,7 @@ U_BOOT_CMD (break, 3, 0, do_bedbug_break,
" - Set or clear a breakpoint\n"
"break <address> - Break at an address\n"
"break off <bp#> - Disable breakpoint.\n"
"break show - List breakpoints.\n");
"break show - List breakpoints.");
/* ======================================================================
* Called from the debug interrupt routine. Simply calls the CPU-specific
@ -278,7 +278,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
"continue from a breakpoint",
" - continue from a breakpoint.\n");
"");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping into
@ -309,7 +309,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (step, 1, 1, do_bedbug_step,
"single step execution.",
" - single step execution.\n");
"");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping over
@ -340,7 +340,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (next, 1, 1, do_bedbug_next,
"single step execution, stepping over subroutines.",
" - single step execution, stepping over subroutines.\n");
"");
/* ======================================================================
* Interpreter command to print the current stack. This assumes an EABI
@ -385,7 +385,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
"Print the running stack.",
" - Print the running stack.\n");
"");
/* ======================================================================
* Interpreter command to dump the registers. Calls the CPU-specific
@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_rdump */
U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
"Show registers.", " - Show registers.\n");
"Show registers.", "");
/* ====================================================================== */

2
common/cmd_bmp.c
View file

@ -141,7 +141,7 @@ U_BOOT_CMD(
bmp, 5, 1, do_bmp,
"manipulate BMP image data",
"info <imageAddr> - display image info\n"
"bmp display <imageAddr> [x y] - display image at x,y\n"
"bmp display <imageAddr> [x y] - display image at x,y"
);
/*

4
common/cmd_boot.c
View file

@ -66,7 +66,7 @@ U_BOOT_CMD(
go, CONFIG_SYS_MAXARGS, 1, do_go,
"start application at address 'addr'",
"addr [arg ...]\n - start application at address 'addr'\n"
" passing 'arg' as arguments\n"
" passing 'arg' as arguments"
);
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@ -74,5 +74,5 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
reset, 1, 0, do_reset,
"Perform RESET of the CPU",
NULL
""
);

3
common/cmd_bootldr.c
View file

@ -170,4 +170,5 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
"boot ldr image from memory",
"[addr]\n"
" - boot ldr image stored in memory\n");
""
);

10
common/cmd_bootm.c
View file

@ -948,7 +948,7 @@ U_BOOT_CMD(
"\tbdt - OS specific bd_t processing\n"
"\tcmdline - OS specific command line processing/setup\n"
"\tprep - OS specific prep before relocation or go\n"
"\tgo - start OS\n"
"\tgo - start OS"
);
/*******************************************************************/
@ -973,14 +973,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
boot, 1, 1, do_bootd,
"boot default, i.e., run 'bootcmd'",
NULL
""
);
/* keep old command name "bootd" for backward compatibility */
U_BOOT_CMD(
bootd, 1, 1, do_bootd,
"boot default, i.e., run 'bootcmd'",
NULL
""
);
#endif
@ -1068,7 +1068,7 @@ U_BOOT_CMD(
"addr [addr ...]\n"
" - print header information for application image starting at\n"
" address 'addr' in memory; this includes verification of the\n"
" image contents (magic number, header and payload checksums)\n"
" image contents (magic number, header and payload checksums)"
);
#endif
@ -1135,7 +1135,7 @@ U_BOOT_CMD(
"list all images found in flash",
"\n"
" - Prints information about all images found at sector\n"
" boundaries in flash.\n"
" boundaries in flash."
);
#endif

4
common/cmd_cache.c
View file

@ -99,14 +99,14 @@ U_BOOT_CMD(
icache, 2, 1, do_icache,
"enable or disable instruction cache",
"[on, off]\n"
" - enable or disable instruction cache\n"
" - enable or disable instruction cache"
);
U_BOOT_CMD(
dcache, 2, 1, do_dcache,
"enable or disable data cache",
"[on, off]\n"
" - enable or disable data (writethrough) cache\n"
" - enable or disable data (writethrough) cache"
);
#endif

4
common/cmd_cplbinfo.c
View file

@ -55,5 +55,5 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo,
"display current CPLB tables",
"\n"
" - display current CPLB tables\n");
""
);

2
common/cmd_dataflash_mmc_mux.c
View file

@ -61,5 +61,5 @@ U_BOOT_CMD(
dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux,
"dataflash_mmc_mux\t- enable or disable MMC or SPI\n",
"[mmc, spi]\n"
" - enable or disable MMC or SPI\n"
" - enable or disable MMC or SPI"
);

2
common/cmd_date.c
View file

@ -218,5 +218,5 @@ U_BOOT_CMD(
"[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
" - without arguments: print date & time\n"
" - with numeric argument: set the system date & time\n"
" - with 'reset' argument: reset the RTC\n"
" - with 'reset' argument: reset the RTC"
);

8
common/cmd_dcr.c
View file

@ -224,22 +224,22 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
"Get an AMCC PPC 4xx DCR's value",
"dcrn - return a DCR's value.\n"
"dcrn - return a DCR's value."
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
"Set an AMCC PPC 4xx DCR's value",
"dcrn - set a DCR's value.\n"
"dcrn - set a DCR's value."
);
U_BOOT_CMD(
getidcr, 3, 1, do_getidcr,
"Get a register value via indirect DCR addressing",
"adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n"
"adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn."
);
U_BOOT_CMD(
setidcr, 4, 1, do_setidcr,
"Set a register value via indirect DCR addressing",
"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn."
);

2
common/cmd_df.c
View file

@ -34,4 +34,4 @@ usage:
U_BOOT_CMD(
sf, 2, 1, do_serial_flash,
"Serial flash sub-system",
"probe [bus:]cs - init flash device on given SPI bus and CS\n")
"probe [bus:]cs - init flash device on given SPI bus and CS")

2
common/cmd_diag.c
View file

@ -72,5 +72,5 @@ U_BOOT_CMD(
" - print information about specified tests\n"
"diag run - run all available tests\n"
"diag run [test1 [test2]]\n"
" - run specified tests\n"
" - run specified tests"
);

2
common/cmd_display.c
View file

@ -74,5 +74,5 @@ U_BOOT_CMD(
"display string on dot matrix display",
"[<string>]\n"
" - with <string> argument: display <string> on dot matrix display\n"
" - without arguments: clear dot matrix display\n"
" - without arguments: clear dot matrix display"
);

4
common/cmd_doc.c
View file

@ -202,7 +202,7 @@ U_BOOT_CMD(
"doc write addr off size - read/write `size'"
" bytes starting at offset `off'\n"
" to/from memory address `addr'\n"
"doc erase off size - erase `size' bytes of DOC from offset `off'\n"
"doc erase off size - erase `size' bytes of DOC from offset `off'"
);
int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@ -342,7 +342,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
docboot, 4, 1, do_docboot,
"boot from DOC device",
"loadAddr dev\n"
"loadAddr dev"
);
int doc_rw (struct DiskOnChip* this, int cmd,

Some files were not shown because too many files have changed in this diff Show more