Commit graph

7655 commits

Author SHA1 Message Date
Adam Ford
83ba8c539d imx8mn_beacon_2g: Switch to binman
The standard 1GB Nano was converted to binman, but the 2G version
was neglected.  Convert it to binman as well.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
2022-01-07 15:42:39 -05:00
Adam Ford
2baacc75a5 imx8mn_beacon: Fix booting hang and switch to binman
Somewhere along the line, the board stopped being able to boot.
Rather than just fixing the issue, let's fix the issue and migrate
to binman to eliminate a warning when using custom imx tools for
generating the binary.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 15:41:58 -05:00
Adam Ford
80efad1342 imx8mm_beacon: Switch to binman for generating image
To eliminate a warning when using custom imx tools for generating
a binary, use binman to generate flash.bin.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-07 12:10:59 -05:00
Peter Robinson
87c34fe216 udoo_neo: Enable support for USB and storage
Enable support for USB and USB storage on the UDOO Neo.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:45 -05:00
Peter Robinson
79ac6917d0 udoo_neo: Fix ethernet
The ethernet has a RMII not RGMII, also needs DM_MDIO and finally
initialise it later in the process as it's not needed that early on
and not everything is ready so it locks up the device.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:45 -05:00
Peter Robinson
2bbe1ba0c7 udoo_neo: Fixes for booting from the mSD card
This fixes booting from the mSD card from both SPL and when
using it for the OS booting. It also cleans up a few mmc
booting bits that are no longer needed.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-07 09:30:44 -05:00
Sjoerd Simons
7af3a46ce9 configs: rock-pi-4: Enable rockchip efuse support
Enable efuse support for reading the cpuid#, serial# and generate a
board unique mac address

Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 15:17:59 +08:00
Jagan Teki
0ade02526b engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 14:56:58 +08:00
Jagan Teki
19a4d31c12 arm64: dts: rockchip: Sync px30 from linux-next
Sync the px30 devicetree files from linux-next tree.

commit <14ce8069f48b> ("lib/stackdepot: allow optional init and
stack_table allocation by kvmalloc() - fixup3")

Note, this path even sync rk3326 files as it depends on px30.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 14:56:58 +08:00
Nico Cheng
daec31e5cc rockchip: Kconfig: Enable SPL support for rk3568
Enable SPL support in Kconfig and add some related option in
rk3568_common.h

Signed-off-by: Nico Cheng <nico.cheng@rock-chips.com>
Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-24 11:10:24 +08:00
Tom Rini
cfbd2bc695 - enable KSZ90x1 PHY driver on DHCOR
- DHSOM boards:
   - increase USB power-good delay
   - add update_sf script to install U-Boot into SF
   - increase PHY auto-negotiation timeout to 20 seconds
   - fix SoM and board coding strap GPIO handling
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmG3TqYcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/puhJEACl9lNg7+0GDd6eoi73
 NR4+r1JYPDkYKbbBWjHVueIwKYbpk1uSzYLB70lchUVbdvu3fczJc7uOXTDRnrCN
 13BuMa45HAWxvb/9UuHz3AnrLEsSvEgGCRCXK0FrE0mu1yBZK+6iO1ysuQEJA78j
 7tyBs6i+IzuAusejx8NiqjYughIFZKBzfztLe3OSxDhEam+vCCEAIUoTx7FSq1jp
 TumZULkfx0SCSL86vPnzczjtucrtKiaWhjNLDbg0Ilf28qYYTCdlDcpi7ySpr43u
 VJTAKAXYVQq4Ye3qsth6GSsTZ1pONBoSaaOo2z/hoQu+/Y4+yUrzkLB+0dSrqgsW
 FPosN9/OPSRcBIfhFEV9RojhHK9OxYXr0WjBctb6fZKzHK52neVv819Ixy5WBJvq
 gXo6jK78ILxzOUx1PzRj2safKhArAuPrxD2Lv0wNKqNCWJJZbT037L6p5CFG30UI
 7yltaYm1ukAT6q6MeergHAAcdgYV+nyFOUs7udQY5HltzLpBJkdIGHKJpioAhvYJ
 KNHMwANd499/edL/FdXXN7X8sfb7ylaUaqDfkHPJgfDDFmF4lQ591k+jWeD8H1lo
 LYUhd4/7EvNAS02fvwmrdTWYCCFyxL1HFxwOlFqrkthFJnJj70shBJsB786pvihq
 wd9npDIUFJGSTCTA4uXCu3YHlA==
 =Qgdj
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211213' of https://source.denx.de/u-boot/custodians/u-boot-stm

- enable KSZ90x1 PHY driver on DHCOR
- DHSOM boards:
  - increase USB power-good delay
  - add update_sf script to install U-Boot into SF
  - increase PHY auto-negotiation timeout to 20 seconds
  - fix SoM and board coding strap GPIO handling

# gpg verification failed.
2021-12-13 10:20:25 -05:00
Marek Vasut
5c592b636a ARM: stm32: Enable KSZ90x1 PHY driver on DHCOR
Enable KSZ9x01 PHY driver in DHCOR common configuration, since the
AV96 board has this PHY populated on the PCB.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13 14:34:22 +01:00
Adam Ford
dcbf1145e2 ARM: rmobile: Fix rzg2_beacon_defconfig to address new aliases
The resync of the device trees from Linux 5.16-rc3 caused aliases
to appear on the MMC devices which changed the numbering.
This broke the reading/writing of the environmental variables,
so update the defconfig accordingly.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-13 00:37:28 +01:00
Thomas Skibo
6a863894ad riscv: Support booting SiFive Unmatched from SPI.
Configure SPI flash devices into SPL.  Add SPI boot option to spl.c.
Document how to format flash for booting.

Signed-off-by: Thomas Skibo <thomas-git@skibo.net>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02 16:43:56 +08:00
Padmarao Begari
5c007d24b9 riscv: Update Microchip MPFS Icicle Kit support
This patch updates Microchip MPFS Icicle Kit support. For now,
add Microchip I2C driver, set environment variables for
mac addresses and default build for SBI_V02.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02 16:43:52 +08:00
Heinrich Schuchardt
617270b97b configs: enable CMD_TPM on QEMU ARM
With TPM emulation enabled in u-boot-test-hooks we should also provide the
tpm2 command used for the test/py/tests/test_tpm2.py test.

One of the Python TPMv2 tests expects sandbox specific values. So disable
it on other platforms.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-30 09:23:37 +01:00
Tom Rini
2ffa0e87df Xilinx changes for v2022.01-rc3
sdhci:
 - Fix emmc mini case with missing firmware interface
 
 zynqmp:
 - Restore JTAG interface if required
 - Allow overriding board name
 - Add support for DLC21
 - Fix one fallthrought statement description
 - Use config macro instead of name duplication
 - Save multiboot to variable
 
 firmware:
 - Handle ipi_req errors better
 - Use local buffer in case user doesn't need it instead of NULL/0 location
 
 spi:
 - gqsi: Fix write issue at low frequencies
 
 net:
 - gem: Disable broadcasts
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYZPDrwAKCRDKSWXLKUoM
 IS9GAJ93T/uprhLcKWMb+284YMb2caWgOACfZ02nTlzvZKNNXVretJgZaHXqj1M=
 =cwTL
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.01-rc3

sdhci:
- Fix emmc mini case with missing firmware interface

zynqmp:
- Restore JTAG interface if required
- Allow overriding board name
- Add support for DLC21
- Fix one fallthrought statement description
- Use config macro instead of name duplication
- Save multiboot to variable

firmware:
- Handle ipi_req errors better
- Use local buffer in case user doesn't need it instead of NULL/0 location

spi:
- gqsi: Fix write issue at low frequencies

net:
- gem: Disable broadcasts
2021-11-16 09:51:04 -05:00
Tom Rini
b8a156f54e Pull request for efi-2022-01-rc2-2
UEFI:
 * fix measurement of BootOrder variable for TCG2 protocol
 
 TPM:
 * TIS mmio driver. This driver supports QEMU's emulated TPM.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmGQD7kACgkQxIHbvCwF
 GsStWA/9HmYlBuc0ZNNVVvBtD9QKe1rliXnGubVA52ZhnZHlIijdbpXSZBbA2uQy
 auMox1eQ7isdQFgC8GGZF5O3VpwdT5E/mz1BYukkvHUFdYmwOSKfH++7Tt88P+Uc
 ZK/uIfhZApl9UiuzzLr6M/8T7K/NWg7BtsdNivSe6sBHPIBfAfl0K1CGxU9v1lm1
 0DvPDaby5J3SbZUiln6mzxZ9Yjmqz85s3W7IUvY7I7xWgApaP6IuvQa4pkrGzDeQ
 ofICVozr75yCk1kW+xB5lSQ/iI//ppOL4Ng7aL87eSoAzp1W+5TZrWA6pIYGfWVD
 bgmMI3OileCFrU3uNGKY7dbObP7FZz7lVykXoejMfHNG/Zfmo+f+2qS9PgT83Rnr
 KC4eMqS+0wYiO2Qru+ZJwija9JsS5SO9v7Vp2L0vT2u+CU35dDuy5epi1IHzfSL0
 bO1feAtUYwK/An2jwlSG7EO4AxJ7Yh+WlxL5TgsSqJGdyL/uI3pussuXRnHHshrS
 2xmV9M8dSFy2RQTNO958nloj01XNzPRmcBl5uVF5htye0PI5VFk7Lo8oUj6UzuXt
 14gNl1pumnihkEl4C+/TR7HL9/Q/tgm4EEYIU7+kbEyS0MFEzsjOt0y+Sm12qD7S
 wQ1jnLcstp88e7erMyursv/HUlD8Kn5HWckpGT+wnBKsN4xMSQk=
 =VSW9
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-01-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-01-rc2-2

UEFI:
* fix measurement of BootOrder variable for TCG2 protocol

TPM:
* TIS mmio driver. This driver supports QEMU's emulated TPM.
2021-11-13 18:13:35 -05:00
Tom Rini
a51673eb75 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 23:37:42 +00:00
Tom Rini
82cd1e3da0 Convert CONFIG_LAST_STAGE_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_LAST_STAGE_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
1914075c88 Convert CONFIG_PL011_SERIAL et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PL011_SERIAL
   CONFIG_PL01X_SERIAL

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
b8475e6aca Convert CONFIG_MACB to Kconfig
This converts the following to Kconfig:
   CONFIG_MACB

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
dfb34d0d4a Convert CONFIG_MD5 to Kconfig
This converts the following to Kconfig:
   CONFIG_MD5

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
b70b2bed1a Convert CONFIG_IMX_BOOTAUX et al to Kconfig
This converts the following to Kconfig:
   CONFIG_IMX_BOOTAUX
   CONFIG_IMX_THERMAL

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
99e6feb23c Convert CONFIG_SYS_PROMPT et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_PROMPT
   CONFIG_SYS_PROMPT_HUSH_PS2

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
21e0432058 Convert CONFIG_I2C_EDID et al to Kconfig
This converts the following to Kconfig:
   CONFIG_I2C_EDID
   CONFIG_I2C_EEPROM

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
8bd39de9b1 Convert CONFIG_PHYLIB et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PHYLIB
   CONFIG_PHY_ATHEROS
   CONFIG_PHY_GIGE
   CONFIG_MII

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
406257ae41 Convert CONFIG_MISC_INIT_F et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MISC_INIT_F
   CONFIG_MISC_INIT_R

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
c745299156 Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_CONSOLE_IS_IN_ENV

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
27480e0a9f Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_SPI_FLASH
   CONFIG_ENV_IS_NOWHERE
   CONFIG_ENV_OFFSET
   CONFIG_ENV_OVERWRITE
   CONFIG_ENV_SECT_SIZE
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
1ed68f9204 Convert CONFIG_FSL_USDHC to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_USDHC

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:17 -05:00
Tom Rini
45e19cf378 Convert CONFIG_BITBANGMII to Kconfig
This converts the following to Kconfig:
   CONFIG_BITBANGMII

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
b67f54b10b Convert CONFIG_DOS_PARTITION to Kconfig
This converts the following to Kconfig:
   CONFIG_DOS_PARTITION

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
a8f31121fb Convert CONFIG_E1000 to Kconfig
This converts the following to Kconfig:
   CONFIG_E1000

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Tom Rini
b8260c1715 Convert CONFIG_ARCH_CPU_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_ARCH_CPU_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12 14:18:16 -05:00
Jan Kiszka
83ef79b60b boards: siemens: iot2050: Re-enable bootstage reporting
This got lost while fixing up the condition in
board/siemens/iot2050/board.c

Fixes: b55881dd ("bootstage: Add SPL support")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-11 19:02:44 -05:00
Tom Rini
1e72ad6b38 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- device-tree sync-up with Linux for ls1028a
- fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc,
  spintable code, configs, qspi node, pci
- enable EFI_SET_TIME support in sl28
- powerpc: Drop -mstring
2021-11-11 09:04:20 -05:00
Ilias Apalodimas
1fb868c6b2 configs: Enable tpmv2 mmio on qemu for arm/arm64
A previous commit is adding an MMIO TPMv2 driver.  Include in the default
qemu arm configs, since we plan on using them on EFI testing

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-10 20:57:54 +01:00
Tom Rini
166a77b34b - DHSOM update:
- Remove nWP GPIO hog
    - Increase SF bus frequency to 50Mhz and enable SFDP
    - Disable video output for DHSOM
    - Disable EFI
    - Enable DFU_MTD support
 - Create include file for STM32 gpio driver private data
 - Split board and SOC STM32MP15 configuration
 - Device tree alignement with v5.15-rc6 for STM32MP15
 - Add binman support for STM32MP15x
 - Normalise newlines for stm32prog
 - Update OTP shadow registers in SPL
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAmGL7ykcHHBhdHJpY2Uu
 Y2hvdGFyZEBmb3NzLnN0LmNvbQAKCRDKx3gvezP/pl1iD/45ARfQCdlq5Iq8VbAf
 NV1TjRguoLU6zR5XhyGAIoDkg87Bsty2ayFyAfz8pHkpEQAFkj9bhiaRZEQj2SSi
 avb2slYGC6iLBEgVBfHjnih4hf0JPTJWcCx+0IO298IknJ49qFfujBFdb3LCbXzt
 zc6QE4mvWWdQHQfNym5UjHqJvI2seHbarEmltAQNn1hqYevFFQYH6vMtgYtZGH18
 c63HeW6uDuGdxGJ9/dzuV/M5bZUAQOI2jJ9OFv7UYQyrzkvLd4M5Qeb52OZ7xNYZ
 xNPCUtNnWUMUnGlpb/ANIUtqBYfcBj1iOMedchLtL9EANObFew/ktk0L1mdjLpQ4
 neB8Im6KmcZkzPyNDs4ha8bSiwOGhrSMg+B49bpp01JvnmzMW3cFtexXL6nKAZyL
 Iohv5MNp7Cf4Fn68v04RBzrAzcvBNPQUnN/19VMN+bqidAzN9y9N7Jc8JgVSOEWN
 OU45X5N840CjqWr8xZ9znICqCdgnY4QtCI9zi6JLHuvWMG3+c10fzyozRfh/OWkE
 3RSyjf9zSjlzYsOEIe8e5Kz/FqLhYqrhdJz2Aqoz5E3k7YQke8WU/OadOU7BWs5U
 QoIMpq8jcAiNZqoMW/V5pxW2nqIB4VIX7LDYuT2TEnVt+hhLP59NtzFTMEjY68Rk
 cH+alF5WHbnqIXgMh5BokUwgxA==
 =lqEG
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20211110' of https://source.denx.de/u-boot/custodians/u-boot-stm

- DHSOM update:
   - Remove nWP GPIO hog
   - Increase SF bus frequency to 50Mhz and enable SFDP
   - Disable video output for DHSOM
   - Disable EFI
   - Enable DFU_MTD support
- Create include file for STM32 gpio driver private data
- Split board and SOC STM32MP15 configuration
- Device tree alignement with v5.15-rc6 for STM32MP15
- Add binman support for STM32MP15x
- Normalise newlines for stm32prog
- Update OTP shadow registers in SPL
2021-11-10 14:11:30 -05:00
Patrick Delaunay
17aeb589fa stm32mp15: remove configs dependency on CONFIG_TFABOOT
Remove the dependency on CONFIG_TFABOOT in stm32mp Kconfig
- always activate the ARCH config: CONFIG_ARCH_SUPPORT_PSCI
  and CONFIG_CPU_V7_HAS_NONSEC
- CONFIG_ARMV7_NONSEC is deactivated in trusted defconfig
- the correct sysreset driver is activated in each defconfig:
  CONFIG_SYSRESET_PSCI or SYSRESET_SYSCON

Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:07:30 +01:00
Marek Vasut
819408d001 ARM: stm32: Align mtdparts with SPI NOR layout on DHSOM
The DHSOM uses different SPI NOR layout than the ST devkit, stop
pulling in the ST specific runtime mtdparts settings and adjust
the mtdparts accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:03:59 +01:00
Marek Vasut
d59c65817c ARM: stm32: Disable video output on DHSOM
The video output support is unused and disabling it saves about 20 kiB of space.
In case video output support is required, it can be re-enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:03:59 +01:00
Marek Vasut
00d7878275 ARM: stm32: Disable EFI on DHSOM
The EFI support is unused and disabling it saves about 70 kiB of space.
In case EFI support is required, it can be re-enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:03:59 +01:00
Marek Vasut
848da6f17a ARM: stm32: Increase default SF bus frequency to 50 MHz and enable SFDP
Increase default SPI NOR bus frequency from 1 MHz to 50 MHz and
enable SFDP parsing to obtain more accurate SPI NOR configuration.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:03:59 +01:00
Marek Vasut
c5eb35651c ARM: stm32: Enable DFU MTD support on DHSOM
All the STM32MP1 based DHSOM have SPI NOR from which they boot,
enable DFU_MTD support to make it possible to expose that SPI NOR
via the DFU.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10 17:03:57 +01:00
Patrick Delaunay
5564b4cd4d stm32mp: add binman support for STM32MP15x
Use binman to add the stm32image header on SPL binary for basic boot
or on U-Boot binary when it is required, i.e. for TF-A boot without FIP
support, when CONFIG_STM32MP15x_STM32IMAGE is activated.

The "binman" tool is the recommended tool for specific image generation.
This patch allows to suppress the config.mk file and it is a preliminary
step to manage FIT generation with binman.

The init_r parsing of U-Boot device tree to search the binman
information is not required for STM32MP15, so the binman library
can be removed in U-Boot (CONFIG_BINMAN_FDT is deactivated).

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-10 15:12:16 +01:00
Vladimir Oltean
99e1fa89f1 configs: ls1028a: ensure Ethernet is enabled
CONFIG_FSL_ENETC is not explicitly enabled in the NXP LS1028A config
files, instead it is selected by CONFIG_MSCC_FELIX_SWITCH, a state of
matters which is fragile.

CONFIG_MSCC_FELIX_SWITCH depends on CONFIG_DM_DSA, which depends on
CONFIG_PHY_FIXED.

Not all LS1028A boards did enable CONFIG_PHY_FIXED, which resulted in
all of Ethernet being compiled out.

This patch makes sure that CONFIG_PHY_FIXED is enabled for all LS1028A
boards, and CONFIG_FSL_ENETC as well - don't rely on that fragile
selection done by the Felix switch config.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Rajesh Bhagat
a97a071d10 configs: fsl: migrate FMAN/QE specific defines to Kconfig
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR,
CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and
move these entries to defconfigs.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Kuldeep Singh
5e736c9397 configs: ls1046aqds: Configure environment related configs
LS1046A-QDS board requires updation in few environment configs in TFA
defconfigs of the board.

Following are the changes:
- Update CONFIG_ENV_ADDR
- Update CONFIG_ENV_SECT_SIZE
- Enable CONFIG_SYS_RELOC_GD_ENV_ADDR

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30
Kuldeep Singh
266e68be75 configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigs
LS1046A-QDS has CONFIG_SPI_FLASH_SST, CONFIG_SPI_FLASH_EON and
CONFIG_SPI_FLASH_STMICRO defines present in header. Move these entries
from header to defconfigs.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 17:18:23 +05:30