Commit graph

454 commits

Author SHA1 Message Date
Wolfgang Denk
8f86a3636e Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2009-01-24 02:17:02 +01:00
Wolfgang Denk
1ea0823786 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-01-24 02:08:31 +01:00
Gary Jennejohn
0c0ccf401e POWERPC 82xx: add the SCC as an HDLC controller
Right now this is only used by keymile.

Signed-off-by: Gary Jennejohn <garyj@denx.de>
2009-01-24 00:42:04 +01:00
Kumar Gala
c51fc5d53c 85xx: Handle eLBC difference w/36-bit physical
The eLBC only handles 32-bit physical address in systems with 36-bit
physical.  The previos generation of LBC handled 34-bit physical
address in 36-bit systems.  Added a new CONFIG option to convey
the difference between the LBC and eLBC.

Also added defines for XAM bits used in LBC for the extended 34-bit
support.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-23 17:08:28 -06:00
Dave Liu
22cca7e1cd fsl-ddr: make the self refresh idle threshold configurable
Some 85xx processors have the advanced power management feature,
such as wake up ARP, that needs enable the automatic self refresh.

If the DDR controller pass the SR_IT (self refresh idle threshold)
idle cycles, it will automatically enter self refresh. However,
anytime one transaction is issued to the DDR controller, it will
reset the counter and exit self refresh state.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-01-23 17:03:14 -06:00
Dave Liu
22ff3d0134 fsl-ddr: clean up the ddr code for DDR3 controller
- The DDR3 controller is expanding the bits for timing config
- Add the DDR3 32-bit bus mode support

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
2009-01-23 17:03:13 -06:00
Anton Vorontsov
fd6646c0b9 mpc83xx: Add support for MPC83xx PCI-E controllers
This patch adds support for MPC83xx PCI-E controllers in Root Complex
mode.

The patch is based on Tony Li and Dave Liu work[1].

Though unlike the original patch, by default we don't register PCI-E
buses for use in U-Boot, we only configure the controllers for future
use in other OSes (Linux). This is done because we don't have enough
of spare BATs to map all the PCI-E regions.

To actually use PCI-E in U-Boot, users should explicitly define
CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
only then U-Boot will able to access PCI-E, but at the cost of disabled
address translation.

[1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html

Signed-off-by: Tony Li <tony.li@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-01-21 18:43:49 -06:00
Trent Piepho
ada591d2a0 mpc8[56]xx: Put localbus clock in sysinfo and gd
Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
and print it out, but don't save it.

This changes where its calculated and stored to be more consistent with the
CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.

The localbus frequency is added to sysinfo and calculated when sysinfo is
set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.

get_clocks() copies the frequency into the global data, as the other
frequencies are, into a new field that is only enabled for MPC85xx and
MPC86xx.

checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
from sysinfo, like the other frequencies, instead of calculating it on the
spot.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-12-19 18:32:49 -06:00
Trent Piepho
a5d212a263 mpc8xxx: LCRR[CLKDIV] is sometimes five bits
On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
instead of four.

In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems.  It
should be safe as the fifth bit was defined as reserved and set to 0.

Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-12-19 18:20:25 -06:00
Kumar Gala
77c8115b1f ppc: Use addrmap in virt_to_phys and map_physmem.
If we have addr map support enabled use the mapping functions to
implement virt_to_phys() and map_physmem().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-19 18:20:08 -06:00
Kumar Gala
ecf5b98c7a 85xx: Add support to populate addr map based on TLB settings
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-19 18:20:08 -06:00
Becky Bruce
b1ffecec37 powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
Casting a pointer to a phys_addr_t when it's an unsigned long long
on a 32-bit system without first casting to a non-pointer type
generates a compiler warning. Fix this.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
2008-12-16 16:54:41 +01:00
Kumar Gala
65e43a1063 Introduce virt_to_phys()
virt_to_phys() returns the physical address given a virtual. In most
cases this will be just the input value as the vast majority of
systems run in a 1:1 mode.

However in systems that are not running this way it should report the
physical address or ~0 if no mapping exists for the given virtual
address.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15 22:04:29 +01:00
Kumar Gala
ea154a1781 FSL: Moved BR_PHYS_ADDR for localbus to common header
The BR_PHYS_ADDR macro is useful on all machines that have local bus
which is pretty much all 83xx/85xx/86xx chips.

Additionally most 85xx & 86xx will need it if they want to support
36-bit physical addresses.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
2008-12-04 03:15:43 -06:00
Peter Tyser
9427ccde03 85xx: Add PORDEVSR_PCI1 define
Add define used to determine if PCI1 interface is in PCI or PCIX mode.

Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-12-04 03:15:43 -06:00
Dave Mitchell
b14ca4b61a ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
L2 cache DCRs from ppc440.h to this new header.

Also converted these DCR defines from lowercase to uppercase and
modified referencing modules to use them.

Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-21 10:52:33 +01:00
Haiying Wang
4e190b03aa Make Freescale local bus registers available for both 83xx and 85xx.
- Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
  can be shared by both 83xx and 85xx
- Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
  files which use lbus83xx_t.
- Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
  85xx can share them.

Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-10-29 11:12:53 -05:00
Peter Tyser
4442f45b0e 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
processors have a 3-bit wide IO_SEL field but have the most
significant bit is wired to 0 so this change should not affect
them.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-10-27 16:45:43 -05:00
Kumar Gala
0f060c3bf8 85xx: Add basic e500mc core support
Introduce CONFIG_E500MC to deal with the minor differences between
e500v2 and e500mc.

* Certain fields of HID0/1 don't exist anymore on e500mc
* Cache line size is 64-bytes on e500mc
* reset value of PIR is different

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-24 15:10:47 -05:00
Anton Vorontsov
6f9cc6608b mpc83xx: serdes: add forgotten shifts for rfcks
The rfcks should be shifted by 28 bits left. We didn't notice the bug
because we were using only 100MHz clocks (for which rfcks == 0).

Though, for SGMII we'll need 125MHz clocks.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:34:01 -05:00
Wolfgang Denk
06c2942218 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2008-10-21 21:19:35 +02:00
Stefan Roese
43cbce69d4 ppc4xx: Correctly setup ranges property in ebc node
Previously only the NOR flash mapping was written into the ranges
property of the ebc node. This patch now writes all enabled chip
select areas into the ranges property.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:35:02 +02:00
Timur Tabi
681c02d05b 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
to add a comment that the correct value disagrees with the 8544 reference
manual.  The changelog for that commit is also wrong, as it says "bit 28"
when it should be "bit 24".

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-10-21 11:15:20 +02:00
Wolfgang Denk
f82642e338 Merge 'next' branch
Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-18 21:59:44 +02:00
Haiying Wang
dfb49108e4 Pass dimm parameters to populate populate controller options
Because some dimm parameters like n_ranks needs to be used with the board
frequency to choose the board parameters like clk_adjust etc. in the
board_specific_paramesters table of the board ddr file, we need to pass
the dimm parameters to the board file.

* move ddr dimm parameters header file from /cpu to /include directory.
* add ddr dimm parameters to populate board specific options.
* Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Haiying Wang
dbbbb3abef Make DDR interleaving mode work correctly
Fix some bugs:
  1. Correctly set intlv_ctl in cs_config.
  2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
  3. Set base_address and total memory for each ddr controller in memory
     controller interleaving mode.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Kumar Gala
54e091d3b6 85xx: Export invalidate_{i,d}cache and add flush_dcache
Added the ability for C code to invalidate the i/d-cache's and
to flush the d-cache.  This allows us to more efficient change mappings
from cache-able to cache-inhibited.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-18 21:54:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
richardretanubun
c68a05feeb Adds two more ethernet interface to 83xx
Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
Six eth interface is chosen because the platform I am using combines
UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.

Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-10-18 21:54:00 +02:00
Yuri Tikhonov
bf29e0ea0a ppc4xx: PPC44x MQ initialization
Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).

Previously the appropriate initialization had been made in Linux, by the
ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
registers after normal operation has begun is not supported and could
have unpredictable results.

Comment from Stefan: This patch doesn't change the resulting value of the
MQ registers. It explicitly sets/clears all bits to the desired state which
better documents the resulting register value instead of relying on pre-set
default values.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-17 13:02:42 +02:00
Kumar Gala
f7d190b1c0 85xx: Using proper I2C source clock divider for MPC8544
The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
bit 26, instead it should be bit 28.  This caused in incorrect
interpretation of the i2c_clk which is the same as the SEC clk on
MPC8544.  The SEC clk is controlled by cfg_sec_freq that is reported
in PORDEVSR2.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-17 10:51:35 +02:00
Jason Jin
c0391111c3 Fix the incorrect DDR clk freq reporting on 8536DS
On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
The display is still sync mode DDR freq. This patch try to fix
this. The display DDR freq is now the actual freq in both
sync and async mode.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2008-10-07 15:37:08 -05:00
Stefan Roese
5ff889349d ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
This patch moves some 4xx specific prototypes out of include common.h
to a ppc4xx specific header.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-08 14:11:12 +02:00
Stefan Roese
c351575c22 Merge branch 'master' of /home/stefan/git/u-boot/u-boot 2008-09-08 10:35:49 +02:00
Mark Jackson
f5c3ba7978 Allow console input to be disabled
Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.

When CONFIG_DISABLE_CONSOLE is defined, setting
GD_FLG_DISABLE_CONSOLE disables all console input and output.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
2008-09-06 22:36:54 +02:00
Adam Graham
f6b6c45840 ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
Signed-off-by: Adam Graham <agraham@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-05 12:04:16 +02:00
Nick Spence
46497056ae mpc83xx: Store and display Arbiter Event Register values
Record the Arbiter Event Register values and optionally display them.

The Arbiter Event Register can record the type and effective address of
an arbiter error, even through an HRESET. This patch stores the values in
the global data structure.

Display of the Arbiter Event registers immediately after the RSR value
can be enabled with defines. The Arbiter values will only be displayed
if an arbiter event has occured since the last Power On Reset, and either
of the following defines exist:
 #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
                                    and type register values
 #define CONFIG_DISPLAY_AER_FULL  - display and interpret the arbiter
                                    event register values

Address Only transactions are one of the trapped events that can register
as an arbiter event. They occur with some cache manipulation instructions
if the HID0_ABE (Address Broadcast Enable) is set and the memory region
has the MEMORY_COHERENCE WIMG bit set. Setting:
 #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
                              only events, so that it can still capture
                              other real problems.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-09-03 16:06:57 -05:00
Kumar Gala
ef50d6c06e mpc85xx: Add support for the MPC8536
The MPC8536 Adds SDHC and SATA controllers to the PQ3 family.  We
also have SERDES init code for the 8536.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-08-27 11:43:54 -05:00
Kumar Gala
6fb1b73468 FSL DDR: Add e500 TLB helper for DDR code
Provide a helper function that board code can call to map TLBs when
setting up DDR.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:48 -05:00
Kumar Gala
58e5e9aff1 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
The main purpose of this rewrite it to be able to share the same
initialization code on all FSL PowerPC products that have DDR
controllers.  (83xx, 85xx, 86xx).

The code is broken up into the following steps:
	GET_SPD
	COMPUTE_DIMM_PARMS
	COMPUTE_COMMON_PARMS
	GATHER_OPTS
	ASSIGN_ADDRESSES
	COMPUTE_REGS
	PROGRAM_REGS

This allows us to share more code an easily allow for board specific code
overrides.

Additionally this code base adds support for >4G of DDR and provides a
foundation for supporting interleaving on processors with more than one
controller.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:05:58 +02:00
Kumar Gala
f784e32b4b FSL DDR: Provide a generic set_ddr_laws()
Provide a helper function that will setup the last available
LAWs (upto 2) for DDR.  Useful for SPD/dyanmic DDR setting code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:05:55 +02:00
Nick Spence
002d27caf2 MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
This patch adds elements to the 83xx sysconf structure and #define values that are used
by mpc83xx family devices.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25 17:04:40 -05:00
Prodyut Hazarika
079589bcfb ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
PPC405EX and PPC460EX/GT/SX

- Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
  processors
- Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
  across processors (405 and 440/460)
- Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
  processors
- Add register bit definitions for Memory Queue Configuration registers

Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-21 10:31:16 +02:00
Stefan Roese
f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
Stefan Roese
60204d06ed ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-18 12:31:25 +02:00
Ricardo Ribalda Delgado
d865fd0980 ppc4xx: CPU PPC440x5 on Virtex5 FX
-This patchs gives support for the embbedded ppc440
 on the Virtex5 FPGAs
-interrupts.c divided in uic.c and interrupts.c
-xilinx_irq.c for xilinx interrupt controller
-Include modifications propossed by  Stefan Roese

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: Stefan Roese <sr@denx.de>
2008-07-18 12:30:50 +02:00
Stefan Roese
42246dacf6 Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next 2008-07-17 10:41:06 +02:00
Kumar Gala
7f9f4347cf 85xx: Add some L1/L2 SPR register definitions
Add new L1/L2 SPRs related to e500mc cache config and control.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 20:19:59 -05:00
Kim Phillips
6b70ffb9d1 fdt: add crypto node handling for MPC8{3, 5}xxE processors
Delete the crypto node if not on an E-processor.  If on 8360 or 834x family,
check rev and up-rev crypto node (to SEC rev. 2.4 property values)
if on an 'EA' processor, e.g. MPC8349EA.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-07-14 17:01:29 -05:00
Stefan Roese
3a82113ed5 ppc4xx: Add 460SX UIC defines
Only the really needed ones are added (cascading and EMAC/MAL).

Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:14 +02:00
Stefan Roese
5de851403b ppc4xx: Rework 440GX UIC handling
This patch reworks the 440GX interrupt handling so that the common 4xx
code can be used. The 440GX is an exception to all other 4xx variants
by having the cascading interrupt vectors not on UIC0 but on a special
UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
handling is simpler without any 440GX special cases.

Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:14 +02:00
Stefan Roese
d1631fe1a0 ppc4xx: Consolidate PPC4xx UIC defines
This 2nd patch now removes all UIC mask bit definition. They should be
generated from the vectors by using the UIC_MASK() macro from now on.
This way only the vectors need to get defined for new PPC's.

Also only the really used interrupt vectors are now defined. This makes
definitions for new PPC versions easier and less error prone.

Another part of this patch is that the 4xx emac driver got a little
cleanup, since now the usage of the interrupts is clearer.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:14 +02:00
Stefan Roese
4fb25a3db3 ppc4xx: Consolidate PPC4xx UIC defines
This patch is the first step to consolidate the UIC related defines in the
4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
steps.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:13 +02:00
Stefan Roese
7ee2619c20 ppc4xx: Consolidate PPC4xx EBC defines
This patch removes all EBC related defines from the PPC4xx headers
ppc405.h and ppc440.h and introduces a new header

include/asm-ppc/ppc4xx-ebc.h

with all those defines.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:13 +02:00
Grant Erickson
2e2050842e ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
controller registers (MODT and INITPLR) used by the
PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
peer values used for the INITPLR MR and EMR registers,
respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).

With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
Kilauea are replaced by equivalent mnemonics to make it easier to
compare and contrast other 405EX(r)-based boards (e.g. during board
bring-up).

Finally, unified the SDRAM controller register dump routine such that
it can be used across all processor variants that utilize the IBM DDR2
SDRAM controller core. It produces output of the form:

	PPC4xx IBM DDR2 Register Dump:
		...
	        SDRAM_MB0CF[40] = 0x00006701
		...

which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
since it is not uncommon that the DCR values in header files get mixed
up and it helps to validate, at a glance, they match what is printed
in the user manual.

Tested on:
  AMCC Kilauea/Haleakala:
  - NFS Linux Boot: PASSED
  - NAND Linux Boot: PASSED

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:13 +02:00
Grant Erickson
ad7382d828 ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
revision ID DCR based on 405EX, and add field mnemonics for bus error
status and ECC error status registers.

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:13 +02:00
Grant Erickson
5b457d0073 PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
the 405EX(r), SDRAM_MCSTAT has a different DCR value.

Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
which causes SDRAM initialization to periodically fail since it can
prematurely indicate SDRAM ready status.

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:12 +02:00
Feng Kan
96e5fc0e6a ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
Signed-off-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:12 +02:00
Jon Loeliger
859f24350e Merge commit 'wd/master' 2008-07-10 12:05:32 -05:00
Stefan Roese
5d812b8b4a ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
To support such configurations, we "only" map the first 2GB via the TLB's. We
need some free virtual address space for the remaining peripherals like, SoC
devices, FLASH etc.

Note that ECC is currently not supported on configurations with more than 2GB
SDRAM. This is because we only map the first 2GB on such systems, and therefore
the ECC parity byte of the remaining area can't be written.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-10 09:14:01 +02:00
Jason Jin
3473ab7372 Feed the watchdog in u-boot for 8610 board.
The watchdog on 8610 board is enabled by setting sw[6]
to on. Once enabled, the watchdog can not be disabled
by software. So feed the dog in u-boot is necessary for
normal operation.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2008-07-07 11:29:48 -05:00
Wolfgang Denk
3070a9a3cb Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx 2008-07-07 00:32:47 +02:00
Kumar Gala
4928e97c85 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
fls64, __ilog2_u64, ffs64 are variants that work on an u64,
and fls is used to implement them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-01 21:47:12 +02:00
Kim Phillips
4890246a2c mpc83xx: move CPU_TYPE_ENTRY over to processor.h
to avoid this:

cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
In file included from cpu.c:33:
/home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-25 16:34:29 -05:00
Anatolij Gustschin
96026d42fa Fix 4xx build issue
Building for 4xx doesn't work since commit 4dbdb768:

In file included from 4xx_pcie.c:28:
include/asm/processor.h:971: error: expected ')' before 'ver'
make[1]: *** [4xx_pcie.o] Error 1

This patch fixes the problem.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19 22:48:45 +02:00
Becky Bruce
b57ca3e128 Change bd/gd memsize/ram_size to be phys_size_t.
Currently, both are defined as an unsigned long, but
should be phys_size_t. This should result in no real change,
since phys_size_t is currently an unsigned long for all the
default configs.  Also add print_lnum to cmd_bdinfo to deal
with the potentially wider memsize.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 00:54:53 +02:00
Wolfgang Denk
1730edf76c Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx 2008-06-11 22:13:07 +02:00
Kumar Gala
ba04f70109 FSL LAW: Add new interface to use the last free LAW
LAWs have the concept of priority so its useful to be able to allocate
the lowest (highest number) priority.  We will end up using this with the
new DDR code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 01:53:09 -05:00
Kumar Gala
f060054dad FSL LAW: Keep track of LAW allocations
Make it so we keep track of which LAWs have allocated and provide
a function (set_next_law) which can allocate a LAW for us if one is
free.

In the future we will move to doing more "dynamic" LAW allocation
since the majority of users dont really care about what LAW number
they are at.

Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-06-11 01:50:53 -05:00
Sergei Poselenov
740280e68c Added the upmconfig() function for 85xx.
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-06-11 00:29:29 -05:00
Wolfgang Grandegger
398415114f PPC: add accessor macros to clear and set bits in one shot
PPC: add accessor macros to clear and set bits in one shot

This patch adds macros from linux/include/asm-powerpc/io.h to clear and
set bits in one shot using the in_be32, out_be32, etc. accessor functions.
They are very handy to manipulate bits it I/O registers.

This patch is required for my forthcoming FSL NAND UPM driver re-write and
the support for the TQM8548 module.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Wolfgang Grandegger
6fab2fe72c 83xx/85xx/86xx: add more MxMR local bus definitions
83xx/85xx/86xx: add more MxMR local bus definitions

This patch adds more macro definitions for the UPM Machine Mode Registers
They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
required for my forthcoming FSL NAND UPM driver re-write and the support
for the TQM8548 module.

This patch is based on the following two patches from Anton Vorontsov:

http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html

I leave coding style violation fixes, code beautification and name
corrections to somebody else ;-(.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Anton Vorontsov
c8c5fc266e 83xx/85xx: further localbus cleanups
Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-06-10 18:22:25 -05:00
Anton Vorontsov
42dbd667c8 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
use it on MPC85xx and MPC86xx processors.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-06-10 18:22:25 -05:00
Kumar Gala
4dbdb7681e 85xx: expose cpu identification
The current cpu identification code is used just to return the name
of the processor at boot.  There are some other locations that the name
is useful (device tree setup).  Expose the functionality to other bits
of code.

Also, drop the 'E' suffix and add it on by looking at the SVR version
when we print this out.  This is mainly to allow the most flexible use
of the name.  The device tree code tends to not care about the 'E' suffix.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 18:22:25 -05:00
Stefan Roese
17ceb069b8 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
ppc4xx related SDRAM/DDR/DDR2 controller defines.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-03 20:21:58 +02:00
Grant Erickson
c821b5f120 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
This patch (Part 1 of 2):

* Rolls up a suite of changes to enable correct primordial stack and
  global data handling when the data cache is used for such a purpose
  for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).

* Related to the first, unifies DDR2 SDRAM and ECC initialization by
  eliminating redundant ECC initialization implementations and moving
  redundant SDRAM initialization out of board code into shared 4xx
  code.

* Enables MCSR visibility on the 405EX(r).

* Enables the use of the data cache for initial RAM on
  both AMCC's Kilauea and Makalu and removes a redundant
  CFG_POST_MEMORY flag from each board's CONFIG_POST value.

  - Removed, per Stefan Roese's request, defunct memory.c file for
    Makalu and rolled sdram_init from it into makalu.c.

With respect to the 4xx DDR initialization and ECC unification, there
is certainly more work that can and should be done (file renaming,
etc.). However, that can be handled at a later date on a second or
third pass. As it stands, this patch moves things forward in an
incremental yet positive way for those platforms that utilize this
code and the features associated with it.

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-03 20:20:50 +02:00
Kumar Gala
f979690ee3 Fix warnings from gcc-4.3.0 build on a ppc host
* The cfi_flash.c memset fix actual allows the board to boot so there is
  a bit more going on here than just resolving warnings associated with
  uninitialized variables.

* include/asm/bitops.h:302: warning: '__swab32p' is static but used in
  inline function 'ext2_find_next_zero_bit' which is not static

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-03 19:52:52 +02:00
Becky Bruce
d5b9b8cdb8 PPC: Add print_bats() to lib_ppc/bat_rw.c
This function prints the values of all the BAT register
pairs - I needed this for debug earlier this week; adding it to
lib_ppc so others can use it (and add it to reginfo commands
if so desired).

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-03 18:03:03 +02:00
Becky Bruce
c148f24c15 PPC: Change lib_ppc/bat_rw.c to use high bats
Currently, this code only deals with BATs 0-3, which makes
it useless on systems that support BATs 4-7.  Add the
support for these registers.

Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
2008-06-03 18:01:24 +02:00
Wolfgang Denk
eddc7c46c6 Merge branch 'lwmon5' of /home/wd/git/u-boot/projects 2008-05-21 01:13:39 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Yuri Tikhonov
0e15ddd11f POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
This way we become able to utilize the full post_log_word for POST
activities (overwise, POST ECC, which has 0x8000 ID, could be
erroneously treated as started in post_output_backlog() even if there
was actually no POST ECC run (because of OCM POST failure, for
example).

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-05-20 23:24:38 +02:00
Yuri Tikhonov
28a3850658 POST: add POST_STOP flag
Don't run futher tests in case of a test fails that is marked as
POST_STOP.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-05-20 23:24:37 +02:00
Stefan Roese
70fab1908f ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-13 20:22:01 +02:00
Becky Bruce
f3612a7b19 PPC: fix map_physmem build warning
map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
enabled.  This quiets the warning.

Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
2008-05-10 01:00:37 +02:00
Kumar Gala
45239cf415 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
All the 85xx and 86xx UM describe the register as timing_cfg_3
not as ext_refrec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 11:44:29 -05:00
Kumar Gala
ef7d30b143 85xx/86xx: Rename DDR init address and init extended address register
Rename init_addr and init_ext_addr to match the docs between
85xx and 86xx.  Both now use 'init_addr' and 'init_ext_addr'.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 11:42:05 -05:00
Stefan Roese
5cd0130ecc ppc4xx: Fix compile warning of hcu4 board
Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-28 12:07:15 +02:00
Wolfgang Denk
1d907e66fd Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx 2008-04-26 00:06:13 +02:00
Stefan Roese
24bfedbd0b ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
environment variable will now get passed to the Linux kernel by setting
the device_type property of the PCIe device tree node. For normal root-
complex configuration it will keep its defaults value of "pci" and for
endpoint configuration it will get changed to "pci-endpoint".

Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-25 11:44:47 +02:00
Wolfgang Denk
4b7a6dd896 Merge branch 'master' of /home/wd/git/u-boot/lwmon5
Conflicts:

	common/cmd_bootm.c
	common/cmd_log.c
	include/common.h
	post/board/lwmon5/Makefile
	post/board/lwmon5/dsp.c
	post/board/lwmon5/dspic.c
	post/board/lwmon5/fpga.c
	post/board/lwmon5/gdc.c
	post/board/lwmon5/sysmon.c
	post/board/lwmon5/watchdog.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-25 11:32:01 +02:00
Yuri Tikhonov
d32a874b9b lwmon5 watchdog: limit trigger rate
Limit the rate of h/w watch-dog triggering on the LWMON5 board by
the CONFIG_WD_MAX_RATE value.

Note that an earlier version of this patch which used microseconds
instead of ticks dis not work. The problem was that we used
usec2ticks() to convert microseconds into ticks. usec2ticks() uses
get_tbclk(), which in turn calls get_sys_info(). It turns out that
this function does a lot of prolonged operations (like divisions)
which take too much time so we do not trigger the watchdog in time,
and it resets the system.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-04-22 15:21:15 +02:00
Timur Tabi
88353a9851 Fix calculation of I2C clock for some 85xx chips
Some 85xx chips use CCB as the base clock for the I2C.  Some use CCB/2, and
some use CCB/3.  There is no pattern that can be used to determine which
chips use which frequency, so the only way to determine is to look up the
actual SOC designation and use the right value for that SOC.

Update immap_85xx.h to include the GUTS PORDEVSR2 register.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-04-18 17:43:09 -05:00
Kumar Gala
e99ccb4881 Introduce phys_size_t and move phys_addr_t into asm/types.h
Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
that have larger physical addresses like 44x, 85xx, and 86xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-13 17:13:46 -07:00
Wolfgang Denk
e6dfed705e ppc: Get rid of unused machine type definitions
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13 10:03:54 -07:00
Wolfgang Denk
1aeed8d71a Coding Style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13 09:59:26 -07:00
Kim Phillips
35cf155c5e mpc83xx: unreinvent mem_clk
delete ddr_clk and use mem_clk instead.  Rename other ddr_*_clk to
mem_*_clk for consistency's sake.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-28 14:32:07 -05:00
James Yang
5893b3d0a4 85xx: Expand CCSR space with more DDR controller registers.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:04 -05:00
James Yang
a3e77fa535 85xx: Speed up get_ddr_freq() and get_bus_freq()
get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
called.  However, get_sys_info() recalculates extraneous information when
called each time.  Have get_ddr_freq() and get_bus_freq() return memoized
values from global_data instead.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:04 -05:00
Andy Fleming
1ced121600 Update SVR numbers to expand support
FSL has taken to using SVR[16:23] as an SOC sub-version field.  This
is used to distinguish certain variants within an SOC family.  To
account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
constants to reflect the larger value.  We also add SVR numbers for all
of the current variants.  Finally, to make things neater, rather than
use an enormous switch statement to print out the CPU type, we create
and array of SVR/name pairs (using a macro), and print out the CPU name
that matches the SVR SOC version.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-03-26 11:43:04 -05:00
Kumar Gala
ec2b74ffd3 85xx: Added support for multicore boot mechanism
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.

Added support for using the ePAPR defined spin-table mechanism on 85xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00
Anton Vorontsov
453316a2a1 83xx: serdes setup routines
This patch adds few routines to configure serdes on 837x targets.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:45 -05:00
Bryan O'Donoghue
77ff7b7444 8xx: Update OF support on 8xx
This patch does some shifting around of OF support on 8xx.

Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
2008-03-25 22:28:34 +01:00
Yuri Tikhonov
b428f6a8c6 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 22:24:48 +01:00
Yuri Tikhonov
e262efe357 The patch introduces the CRITICAL feature of POST tests. If the test
marked as POST_CRITICAL fails then the alternative, post_critical,
boot-command is used. If this command is not defined then U-Boot
enters into interactive mode.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-03-18 21:59:23 +01:00
Stefan Roese
c813f1f835 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:05 +01:00
Stefan Roese
999ecd5aca ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:04 +01:00
Stefan Roese
84a999b6cd ppc4xx: program_tlb now uses 64bit physical addess
This patch changes the physical addess parameter from 32bit to 64bit.
This is needed for 36bit 4xx platforms to access areas located
beyond the 4GB border, like SoC peripherals (EBC etc.).

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:03 +01:00
John Rigby
5f91db7f58 MPC5121e ADS PCI support take 3
Adds PCI support for MPC5121

Tested with drivers/net/rtl8139.c

Support is conditional since PCI on old silicon does not work.

ads5121_PCI_config turns on PCI

In this version, condition compilation of PCI code has been moved
from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
suggested by Jean-Christophe PLAGNIOL-VILLARD

Signed-off-by: John Rigby <jrigby@freescale.com>
2008-03-02 21:44:59 +01:00
Shinya Kuribayashi
b075d74efb Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
----------------------------------------------------------------
Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]

Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
32bit targets.

GCC can be made to warn about usage of long long types with ISO C90
(-ansi), but only with -pedantic.  You can write this in a way that even
then it doesn't cause warnings, namely by:

#ifdef __GNUC__
__extension__ typedef __signed__ long long __s64;
__extension__ typedef unsigned long long __u64;
#endif

The __extension__ keyword in front of this switches off any pedantic
warnings for this expression.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----------------------------------------------------------------

Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-02-23 09:49:48 +01:00
Wolfgang Denk
6a2dcaf1ee Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx 2008-02-22 13:03:28 +01:00
Kumar Gala
5a9abcc317 Remove duplicate defines for ARRAY_SIZE
A few duplicate of the ARRAY_SIZE macro sneaked in since we put
the define in common.h.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-22 12:36:44 +01:00
Jon Loeliger
a551cee99a 86xx: Fix GUR PCI config registers properly.
Back in commit 975a083a5e where
I tried to "8610HPCD: Fix typos in two PCI setup registers", I
botched it due to not realizing that 8610 and 8641 had different
Global Utility Register defintions, one of which was like 85xx,
and the other wasn't.  Correct this problem by introducing two
symbols, one for each 86xx SoC, but neither of which is named
anything like 85xx.

My bad.  Lovely Wednesday with git bisect.  You know.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-20 14:45:09 -06:00
Jon Loeliger
975a083a5e 8610HPCD: Fix typos in two PCI setup registers.
The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
were erroneously present as 85xx names and values, leftover from
the clone wars.  Fix this by removing the 85xx cruft from the
86xx codebase.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-19 12:31:08 -06:00
Wolfgang Denk
9e04a81388 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx
Conflicts:

	common/cmd_reginfo.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-15 00:26:52 +01:00
Timur Tabi
943afa229c 85xx, 86xx: Determine I2C clock frequencies and store in global_data
Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.

Update the get_clocks() function in 85xx and 86xx to determine the I2C
clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-02-14 23:32:40 +01:00
Wolfgang Denk
e7670f6c1e PPC: Use r2 instead of r29 as global data pointer
R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.

Use r2 instead.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-02-14 22:43:22 +01:00
Jon Loeliger
ccd6e1464e Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
These replace direct structure references for IMMR sections.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-13 16:03:49 -06:00
Becky Bruce
ddcebcb638 86xx: Add print_laws function to fsl_law.c
This can be used for debug, and will be used by board code
to help implement reginfo.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:51 -06:00
Wolfgang Denk
39166b5c9e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2008-01-23 13:56:55 +01:00
Dave Liu
cfe5ca7797 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
The commit 04a9e1180a
cause the 83xx immap broken, so the DMA and PCI will
be failed.

The patch fix the struct spi8xxx and rm struct spi83xx.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-18 12:39:23 -06:00
Kim Phillips
2956acd5ef codingstyle cleanup for spi driver
..and rm unused CONFIG_FSL_SPI define

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 14:01:59 -06:00
Ben Warren
04a9e1180a Add support for a Freescale non-CPM SPI controller
This patch adds support for the SPI controller found on Freescale PowerPC
processors such as the MCP834x family.  Additionally, a new config option,
CONFIG_HARD_SPI, is added for general purpose SPI controller use.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 11:02:25 -06:00
Kumar Gala
44a23cfd63 85xx: Introduce new tlb API
Add a set of functions to manipulate TLB entries:
 * set_tlb() - write a tlb entry
 * invalidate_tlb() - invalidate a tlb array
 * disable_tlb() - disable a variable size tlb entry
 * init_tlbs() - setup initial tlbs based on static table

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 02:04:07 -06:00
Kumar Gala
83d40dfd79 85xx: Move LAW init code into C
Move the initialization of the LAWs into C code and provide an API
to allow modification of LAWs after init.

Board code is responsible to provide a law_table and num_law_entries.

We should be able to use the same code on 86xx as well.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-16 23:21:55 -06:00
Grzegorz Bernacki
5d49e0e152 MPC512X: Cleanup bus clock names.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2008-01-12 15:37:49 +01:00
Grzegorz Bernacki
281ff9a45c ads5121: Added support for FDT.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2008-01-12 15:36:17 +01:00
Dave Liu
c86ef2cd9e mpc83xx: Fix the typo in global data struct
Fix the typo in global_data.h

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-10 21:06:48 -06:00
Timur Tabi
b8ec238503 85xx: add ability to upload QE firmware
Define the layout of a binary blob that contains a QE firmware and instructions
on how to upload it.  Add function qe_upload_firmware() to parse the blob and
perform the actual upload.  Add command-line command "qe fw" to take a firmware
blob in memory and upload it.  Update ft_cpu_setup() on 85xx to create the
'firmware' device tree node if U-Boot has uploaded a firmware.  Fully define
'struct rsp' in immap_qe.h to include the actual RISC Special Registers.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-01-09 16:28:12 -06:00
Kumar Gala
b009f3eca9 85xx: Remove cache config from configs.h
Either use the standard defines in asm/cache.h or grab the information
at runtime from the L1CFG SPR.

Also, minor cleanup in cache.h to make the code a bit more readable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:04 -06:00
Kumar Gala
2146cf5682 Reworked FSL Book-E TLB macros to be more readable
The old macros made it difficult to know what WIMGE and perm bits
were set for a TLB entry.  Actually use the bit masks for these items
since they are only a single bit.

Also moved the macros into mmu.h out of e500.h since they aren't specific
to e500.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:03 -06:00
Kumar Gala
1d47273d46 Use FSL Book-E MMU macros from Linux Kernel
Grab the FSL Book-E MAS register macros from Linux.  Also added
defines for page sizes up to 4TB and removed SHAREN since it doesnt
really exist.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:03 -06:00
Wolfgang Denk
0b4f579230 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx 2008-01-09 11:27:02 +01:00
Matthias Fuchs
6e9233d30a ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
This patch allows the use of 4xx interrupt vector number defines
in board specific code outside cpu/ppc4xx.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 06:32:58 +01:00
Dave Liu
555da61702 mpc83xx: Add the support of MPC8315E SoC
The MPC8315E SoC including e300c3 core and new IP blocks,
such as TDM, PCI Express and SATA controller.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-01-08 09:55:39 -06:00
Dave Liu
03051c3d35 mpc83xx: Add the support of MPC837x SoC
The MPC837x SoC including e300c4 core and new IP blocks,
such as SDHC, PCI Express and SATA controller.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-01-08 09:55:39 -06:00
Lawrence R. Johnson
5ab884b254 ppc4xx: Add functionality to GPIO support
This patch makes two additions to GPIO support:

First, it adds function gpio_read_in_bit() to read the a bit from the
GPIO Input Register (GPIOx_IR) in the same way that function
gpio_read_out_bit() reads a bit from the GPIO Output Register
(GPIOx_OR).

Second, it modifies function gpio_set_chip_configuration() to provide
an additional option for configuring the GPIO from the
"CFG_4xx_GPIO_TABLE".

According to the 440EPx User's Manual, when an alternate output is used,
the three-state control is configured in one of two ways, depending on
the particular output.  The first option is to select the corresponding
alternate three-state control in the GPIOx_TRSH/L registers.  The second
option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
the GPIOx_TRSH/L registers, and set the corresponding bit in the
GPIOx_TCR register to enable the output.  For example, the Manual
specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
the alternate three-state control (first option), and specifies
configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
enabled in the GPIOx_TCR register (second option).

Currently, gpio_set_chip_configuration() configures all alternate signal
outputs to use the first option.  This patch allow the second option to
be selected by setting the "out_val" element in the table entry to
"GPIO_OUT_1".  The first option is used when the "out_val" element is
set to "GPIO_OUT_0".  Because "out_val" is not currently used when an
alternate signal is selected, and because all current GPIO tables set
"out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
not change any existing configurations.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-01-04 11:38:45 +01:00
Jon Loeliger
2c3536425d Merge commit 'wd/master' 2008-01-03 09:46:55 -06:00
Stefan Roese
bb701283a8 Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2 2007-12-27 19:37:26 +01:00
Wolfgang Denk
3f523edb14 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2007-12-27 00:35:03 +01:00
Haavard Skinnemoen
4d7d6936eb Introduce map_physmem() and unmap_physmem()
map_physmem() returns a virtual address which can be used to access a
given physical address without involving the cache. unmap_physmem()
should be called when the virtual address returned by map_physmem() is
no longer needed.

This patch adds a stub implementation which simply returns the
physical address cast to a uchar * for all architectures except AVR32,
which converts the physical address to an uncached virtual mapping.
unmap_physmem() is a no-op on all architectures, but if any
architecture needs to do such mappings through the TLB, this is the
hook where those TLB entries can be invalidated.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:15:16 +01:00
Haavard Skinnemoen
812711ce6b Implement __raw_{read,write}[bwl] on all architectures
This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
from Linux.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-12-13 13:15:04 +01:00
Kumar Gala
8ff3de61fc Handle MPC85xx PCIe reset errata (PCI-Ex 38)
On the MPC85xx boards that have PCIe enable the PCIe errata fix.
(MPC8544DS, MPC8548CDS, MPC8568MDS).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
a853d56c59 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
We already had defines for LAWAR_TRGT_IF_* that we should use
rather than creating new ones.  Also, added some missing defines for
PCIE targets.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
04db400892 Stop using immap_t on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_*_ADDR as the base of the registers
instead of getting it via &immap.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
aafeefbdb8 Stop using immap_t for cpm offset on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
instead of getting it via &immap->im_cpm.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:19 -06:00
Kumar Gala
f59b55a5b8 Stop using immap_t for guts offset on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
instead of getting it via &immap->im_gur.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:19 -06:00
Stefan Roese
f31d38b9ee ppc4xx: Enable 405EX PCIe UTL register configuration
Till now the UTL registers on 405EX were not initialized but left with
their default values. This patch new initializes some of the UTL
registers on 405EX.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-11-16 14:16:54 +01:00
Stefan Roese
aee747f19b ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
- Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
- Cleanup of the 4xx GPIO functions
- Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h

Signed-off-by: Stefan Roese <sr@denx.de>
2007-11-15 14:23:55 +01:00