2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-19 09:43:08 +00:00
Commit graph

22099 commits

Author SHA1 Message Date
Richard Zhu
f1cc436247 arm64: dts: imx8mm: Add the pcie phy support
Add the PCIe PHY support on iMX8MM platforms.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de> # Pick from Linux b9ec888f636f ("arm64: dts: imx8mm: Add the pcie phy support")
2022-02-05 15:49:01 +01:00
Ying-Chun Liu (PaulLiu)
6c3373b386 arm: dts: add imx8mp-rsb3720-a1 dts file
Add board dts for Advantech's imx8mp-rsb3720-a1

Signed-off-by: Darren Huang <darren.huang@advantech.com.tw>
Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw>
Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw>
Signed-off-by: Tim Liang <tim.liang@advantech.com.tw>
Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-02-05 15:49:01 +01:00
Marek Vasut
dd4b3ca52c arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B
The i.MX8M Mini Application Processor Reference Manual, Rev. 3, 11/2020
documents AF MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B , add it into the
pinmux tables.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:01 +01:00
Oliver Stäbler
9aac5c3c7e arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
Fix address of the pad control register
(IOMUXC_SW_PAD_CTL_PAD_SD1_DATA0) for SD1_DATA0_GPIO2_IO2.  This seems
to be a typo but it leads to an exception when pinctrl is applied due to
wrong memory address access.

Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: c1c9d41319c3 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Fixes: 748f908cc882 ("arm64: add basic DTS for i.MX8MQ")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de> # Picked from Linux 5cfad4f45806f ("arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0")
2022-02-05 15:49:01 +01:00
Marek Vasut
2c9d2acefa ARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options
Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options for iMX8M SoCs
in case they should be operated faster, e.g. to improve boot time.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-02-05 15:49:01 +01:00
Marek Vasut
66e90be99f ARM: imx: imx8m: Align PLL 1.2 GHz option with Linux
Linux uses slightly different divider settings for the 1.2 GHz PLL
configuration, adjust the coefficients to match Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
1289ff7bd7 imx8m: lock id_swap_bypass bit in tzc380 enable
According to TRM for i.MX8M Nano and Plus, GPR10 register contains lock
bit for TZASC_ID_SWAP_BYPASS bit. This bit is required to be set in
order to avoid AXI bus errors when GPU is enabled on the platform.
TZASC_ID_SWAP_BYPASS bit is alread set for all imx8m applicable
derivatives, but is missing a lock settings to be applied.

Set the TZASC_ID_SWAP_BYPASS_LOCK bit for those derivatives which have
it implemented.

Since we're here, provide also names to bits from TRM instead of using
BIT() macro in the code.

Fixes: deca6cfbf5 ("imx8mn: set BYPASS ID SWAP to avoid AXI bus errors")
Fixes: a07c718129 ("imx8mp: set BYPASS ID SWAP to avoid AXI bus errors")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Peng Fan <peng.fan@nxp.com>
2022-02-05 15:49:01 +01:00
Adam Ford
2f95456a9a imx: imx8mm_beacon: Enable USB
With the updated device tree's having USB support, enable in
U-Boot.  This also requires the addition of the imx8m power
domain, since the USB is gated by the power domain controller.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:01 +01:00
Adam Ford
d81c6a9f63 arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1
Resync the SOM and baseboar files with the device trees that will
be included in 5.17-RC1 when it's cut.  This will improve pinmuxing
for USDHC1 and add USB functionality.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:01 +01:00
Andrey Zhizhikin
94588ff395 imx8mn-ddr4-evk: generate single bootable image
As suggested in commit 028abfd9b1 ("imx8mm-evk: Generate a single
bootable flash.bin again") for imx8mm_evk, it is possible to produce
single bootable image via binman. This restores the original behavior in
distros, where only one boot container is used to create target image.

Perform similar adaptions in order to provide single bootable image for
imx8mn-ddr4-evk derivate.

Update documentation to drop additional step of copying u-boot.itb

Fixes: 353dfe4b43 ("imx8mn-ddr4-evk: switch to use binman")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:01 +01:00
Patrick Wildt
ea4e9387e3 arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming
Rather than using odd implicit blob-ext naming, explicitly specify the
type to be of blob-ext and therefore also simplify the node naming.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05 15:49:01 +01:00
Patrick Wildt
49f55653fd arm64: dts: imx8mm-u-boot.dtsi: use dash for node names
Some of the nodes were named using a underscore, so rectify this and
consistenly use dashes.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-05 15:49:01 +01:00
Patrick Wildt
553216f6f9 arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename
Explicitly add SPL aka u-boot-spl.bin filename.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05 15:49:01 +01:00
Patrick Wildt
440c7d1188 arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties
Alphabetically re-order properties.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05 15:49:01 +01:00
Heiko Thiery
1bcda4efed imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi
When using a board variant that selects the lvds specific dtb the
*.u-boot.dtsi file will not be included. To have a lvds dtb specific
u-boot.dtsi file move this part to a common board u-boot.dtsi file and
include this in the board base u-boot.dtsi and create an additional one
for the lvds variant.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-02-05 15:49:01 +01:00
Michael Trimarchi
02737ac86d cmd_nandbcb: Support secondary boot address of imx8mn
Add support of secondary boot address for imx8mn. The secondary
boot address is hardcoded in the fuse. The value is calculated
from there according to the following description:

The fuse IMG_CNTN_SET1_OFFSET (0x490[22:19]) is defined as follows:
- Secondary boot is disabled if fuse value is bigger than 10, n = fuse
  value bigger than 10.
- n == 0: Offset = 4MB
- n == 2: Offset = 1MB
- Others & n <= 10 : Offset = 1MB*2^n
- For FlexSPI boot, the valid values are: 0, 1, 2, 3, 4, 5, 6, and 7.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-02-05 13:38:39 +01:00
Sven Schwermer
0be742d06d imx: Enable ACTLR.SMP in SPL for i.MX6/7
Similar to what has been done before with c5437e5b for u-boot proper, we
enable the SMP bit for SPL as well. This is necessary when SDP booting
straight into Linux, i.e. falcon boot. When SDP boot mode is active, the
ROM code does not set this bit which makes the caches not work once
activated in Linux.

On an i.MX6ULL (528MHz), this reduces a minimal kernel's boot time into
an initramfs shell from ~6.1s down to ~1.2s.

Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Marek Vasut
8ed378ff78 ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12
Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi
had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else
the DT cannot be compiled, the same change is likely necessary in Linux.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Marek Vasut
2ab0b52841 ARM: dts: imx: Add labels to remaining anatop regulators
Add labels to remaining anatop regulators, so their supplies can be
assigned in board DTs. This is similar to Linux kernel commit
93385546ba369 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs")
except it does not contain the unrelated sabresd changes.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Lukasz Majewski
e2a636082e arm: dts: Enable support for USB on XEA (imx28) board
This change enables the support for USB with DM on the XEA (imx28)
board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05 13:38:39 +01:00
Lukasz Majewski
1e7212ee9f xea: dts: Update the SPI-NOR flash memory partitions description
Now the dts information corresponds to the one available in the kernel.
With this patch applied the 'mtd list' shows proper names and
offsets for MTD partitions.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05 13:38:39 +01:00
Lukasz Majewski
014315b2d8 spl: Provide more space to be used for storing SPL on imx28 OCRAM
With the current configuration provided in mxsimage{-spl}.mx28.cfg the
size of SPL binary has been constrained to 32 KiB, due to "LOAD IVT"
command with 0x8000 offset.

The problem was that, the imx28 ROM takes the u-boot.sb and then
extracts from it the IVT header and places it on the 0x8000 OCRAM offset
overwriting any valid (i.e. loaded from eMMC or SPI-NOR) SPL code. This
bug was unnoticed as the overwrite size was just 32 bytes, so the
probability that some important code is altered was low.

However, in the XEA board (where the SPL size is ~39KiB), the overwritten
data was `(struct dm_spi_ops *) 0x800c <mxs_spi_ops>`, which is used
during the boot process.

As a result the SPL execution code hanged with "undefined instruction"
abort as callbacks (with wrong addresses) from it were called.

The fix is to change the OCRAM's offset where IVT is loaded to 0xE000,
so the SPL can grow up to ~57KiB (the maximal size of OCRAM memory
available is 0xE3FC).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05 13:38:39 +01:00
Fabio Estevam
e195550bfd ARM: dts: imx6ull: Use the correct name for ESAI_TX0
According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.

Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.

There are no devicetree users in mainline that use the old name,
so just remove the old entry.

Fixes: f8ca22b8de ("arm: dts: imx6ull: add pinctrl defines")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Harald Seiler
12f9b4d086 mx6: Use imx6_src_get_boot_mode() to check boot device
Use imx6_src_get_boot_mode() instead of manually reading SBMR1.  The
existing function has proper handling for software overrides of the
bootdevice which can happen, for example, when booting from an alternate
source using `bmode`.

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Christoph Niedermaier
ca27227c59 ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
The PDK2 board is capable of running both 100M and 1G ethernet. However,
the i.MX6 has only one ethernet MAC, so it is possible to configure
either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
the PDK2 board with another RJ45 port. 100M and 1G ethernet use
different signal pins from the i.MX6, but share the MDIO bus.

This SoM board combination is used to demonstrate how to enable 1G
ethernet configuration.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-02-05 13:38:39 +01:00
Ariel D'Alessandro
c4c1ed68c1 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:

- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Oleksandr Suvorov
4821074bec colibri-imx8x: add on-module gpio expander fxl6408
The FXL6408 GPIO expander manages critical devices,
including on-module USB hub. Configure the expander to
switch the USB hub into bypass mode, allowing to use
on-carrier-board USB hub.

Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-05 13:38:39 +01:00
Ying-Chun Liu (PaulLiu)
556523b955 arm: imx8m: imx8mm-cl-iot-gate: detect extension board
Extension boards can be added to Compulab's iot-gate-imx8mm.
We implement extension board manager for detecting the extension
boards.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-02-05 13:38:39 +01:00
Ying-Chun Liu (PaulLiu)
27ea1c53a3 arm: dts: imx8mm-cl-iot-gate: add Compulab's ied overlays
add the following overlays:
 - IED extension board
 - CAN/TPM/ADC extension board on IED board.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: uboot-imx <uboot-imx@nxp.com>
2022-02-05 13:38:39 +01:00
Alice Guo
6293b73d0f imx8ulp: implement to obtain the SoC current temperature
Obatin the SoC current temperature in print_cpuinfo().

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
dc77d0f9fc imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock
The DDRLOCKED bit in CGC2 DDRCLK will auto lock up and down by HW
according to DDR DIV updating or DDR CLK halt status change. So DDR
PCC disable/enable will trigger the lock up/down flow. We
need wait until unlock to ensure clock is ready.

And before configuring the DDRCLK DIV, we need polling the DDRLOCKED
until it is unlocked. Otherwise writing ti DIV bits will not set.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Alice Guo
0f9b10aaba imx8ulp: clock: Support to enable/disable the ADC1 clock
This patch implements enable_adc1_clk() to enable or disable the ADC1
clock on i.MX8ULP.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
484b306b9e imx8ulp: Update ethernet mac to get from fuse
Get the MAC address from fuse bank5 word 3 and 4. It has
MSB first at lowest address, so have a reverse order with other
iMX used in mac.c

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
3b32010691 imx8ulp: clock: Support to reset DCNano and MIPI DSI
When LPAV is allocated to RTD, the LPAV won't be reset. So we have to
reset DCNano and MIPI DSI in u-boot before enabling the drivers

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
55a7e7882d imx8ulp: clock: Reset DDR controller before clock enable
The LPAV is not allocated to APD when dual boot, so LPAV won't
reset when APD is reset. We have to explicitly reset the DDR,
otherwise its initialization will fail.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
9c7fbebe5d imx8ulp: Workaround LPOSC_TRIM fuse load issue
8ULP ROM should read the LPOSC trim BIAS fuse to fill the CGC0
LPOSCCTRL[7:0], but it writes a fixed value on A0.1 revision.

A0.2 will fix the issue in ROM. But A0.1 we have to workaround
it in SPL by setting LPOSCCTRL BIASCURRENT again.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:39 +01:00
Ye Li
112b4cac9d imx8ulp: Remove freescale name from CPU revision
Remove the freescale vendor name from CPU revision print to align
with other i.MX platforms

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
bd8b673003 imx8ulp: Fix DCNANO QoS setting
The setting does not have effect because we should set it after
power on the PS16 for NIC AV.

So move it after upower_init which has powered on all PS

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
16062f9b0a imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest
To avoid DCNANO underrun issue on high loading test, set its
read Qos on NIC_LPAV to highest

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
9dde390be6 imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display
The board use IO9 of PCA6416 on LPI2C0 and TPM0 for MIPI DSI MUX and
backlight. However the LPI2C0 and TPM0 are M33 resources, in this
patch we simply access them, but this is a temporary solution.
We will modify it when M33 FW changes to set MIPI DSI panel as default
path and enable backlight after reset.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
608ed200f1 imx8ulp: rdc: allow A35 access flexspi0 mem
For singel boot, set flexspi0 mem to be accessed by A35

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
829e06bf41 imx8ulp: clock: Add MIPI DSI clock and DCNano clock
Add the DSI clock enable and disable with PCC reset used.
Add the LCD pixel clock calculation and configuration for DCNano

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
5ff18da34f imx8ulp: clock: Support LPAV clocks in cgc and pcc
Add the PCC5 clocks support and more LPAV clocks and PLL4 PFD in CGC.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Peng Fan
99de168f7e imx8ulp: assign PXP/HIFI4/EPDC to APD domain
Assign the PXP/HIFI4/EPDC to APD domain, otherwise APD not
able to receive interrupts from the modules.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
d563d29203 arm: imx8ulp: Allocate LPAV resources to AP domain
When single boot, assign AP domain as the master domain of the LPAV.
Allocates LPAV master and slave resources like GPU, DCNano, MIPI-DSI
eDMA channel and eDMA request to APD

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ye Li
961ac78735 imx8ulp: soc: Check the DBD_EN fuse before setting RDC
S400 enables RDC only when the DBD_EN is fused. Otherwise, the RDC
is allowed by all masters.

Current S400 has issue if the XRDC has released to A35, then A35 reset
will fail in ROM due to S400 fails to get XRDC.
So temp work around is checking the DBD_EN, if it is not fused, we
don't need to call release XRDC or TRDC.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05 13:38:38 +01:00
Ricardo Salveti
89ca5a7ee1 ARM: imx8m: support env in fat and ext4
Change boot device logic to also allow environment stored in fat and in
ext4 when booting from SD or from eMMC.

As the boot device check for SD and for eMMC was depending on
ENV_IS_IN_MMC being defined, change the ifdef blocks at env_get_location
to use IS_ENABLED instead for all modes, returning NOWHERE when no valid
mode is found.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:38 +01:00
Pali Rohár
af602631e0 imx: nandbcb: Fix printf format in write_fcb
Correct printf format for unsigned long long is %llx and not %llxx.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:38 +01:00
Lukasz Majewski
91f27f3ba8 mxs: power: Change sequence of enabling DCDC switches
The imx28 uses following voltage supplies hierarchy:

VDD_5V (VDD_BAT) -> VDDIO -> VDDA -> VDDMEM
			     \-----> VDDD

One shall first enable DCDC on the parent source (VDDIO) and then
follow with its children.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:38 +01:00
Tim Harvey
cd0ecb3d80 imx8mm-venice-gw7902: fix M2_RST# gpio pinmux
Fix the invalid gw7902 M2_RST# gpio pinmux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:38 +01:00
Ricardo Salveti
8b71576f38 mx7ulp_com: add support for SPL
Add EA iMX7ULP COM board support for building SPL.

Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-05 13:38:38 +01:00
Oleksandr Suvorov
498eedc0d4 mx7ulp: select soc features
Force selecting features present in SoC i.MX7ULP.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2022-02-05 13:38:38 +01:00
Heiko Thiery
6ff55bcd07 arm: imx: imx8mq: add support to get values for more clocks
Return the root clock values for MXC_CSPI_CLK, MXC_I2C_CLK,
MXC_UART_CLK and MXC_QSPI_CLK.

At least for the I2C clock the missing support leads to a wrong
configured I2C frequency. The expected value is 100kHz but the resulting
value is about 1MHz.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:38 +01:00
Jorge Ramirez-Ortiz
25a91f3005 arm64: zynqmp: Print the secure boot status information
Output the secure boot configuration to the console.

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Link: https://lore.kernel.org/r/20211013170447.10414-1-jorge@foundries.io
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-04 13:16:45 +01:00
Tom Rini
3aaabfe9ff Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
This is the promised second part of the sunxi PR for 2022.04, albeit
technially outside of the merge window. We were working on this full
steam since the beginning of the year, and it deserves to be merged,
I think.
The main attraction is support for the F1C100s SoC, which sports a
venerable ARM926 core. Support for this SoC and the LicheePi Nano board
has been in Linux for years, and U-Boot patches were posted mid last
year already.
The new SoC using ARMv5 also means that the bulk of the new code should
not touch any existing boards, although we did some refactorings first,
of course, which actually cleans up some existing sunxi code.

Compile tested for all 160 sunxi boards, and briefly tested on BananaPi M1,
OrangePi Zero, Pine64 and Pine-H64. Tested by others on their boards,
including F1C100s and F1C200s devices.
2022-02-03 23:24:31 -05:00
Icenowy Zheng
ce2b6c4481 ARM: dts: suniv: Add device tree files and bindings for F1C100s
Add device tree files for suniv and
Lichee Pi Nano it is a board based on F1C100s.
dt-bindings/dts are synced with 5.16.0

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Icenowy Zheng
cfe673cda7 mach-sunxi: Add support for SUNIV architecture
Add support for the suniv architecture, which is newer ARM9 SoCs by
Allwinner. The design of it seems to be a mixture of sun3i, sun4i and
sun6i.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Icenowy Zheng
645ee3c25d sunxi: Add F1C100s DRAM initial support
Add support for F1C100s internal dram controller.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Icenowy Zheng
5d35f0f254 ARM: sunxi: Add clock and uart to sunxi headers
This patch aims to add header files for the suniv.
The header files included add support for uart, and clocks.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Icenowy Zheng
88998f7775 arm: arm926ej-s: Add sunxi code
Some Allwinner SoCs use ARM926EJ-S core.

Add Allwinner/sunXi specific code to ARM926EJ-S CPU dircetory.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Jesse Taube
0d4377fc92 mach-sunxi: Move timer code to mach folder
Both armv7 and arm926ejs use this timer code so move it to mach-sunxi.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Icenowy Zheng
508f75afb5 arm: arm926ej-s: start.S: port save_boot_params support from armv7 code
The ARMv7 start code has support for saving some boot params at the
entry point, which is used by some SoCs to return to BROM.

Port this to ARM926EJ-S start code.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:57 +00:00
Andre Przywara
b8cd7f439a armv8: remove no longer needed lowlevel_init.S
When we added Allwinner SoC support to ARMv8, we needed to pull in an
implementation of lowlevel_init() calling the C function s_init(), as
sunxi required it as this time.

The last few patches got rid of this bogus requirement, and as sunxi was
still the only user, we can now remove this lowlevel_init.S from ARMv8
altogether.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-02-04 00:09:57 +00:00
Andre Przywara
534b82a1f2 sunxi: move early "SRAM setup" into separate file
Currently we do some magic "SRAM setup" MMIO writes in s_init(), copied
from the original BSP U-Boot. The comment speaks of this being required
before DRAM access gets enabled, but there is no indication that this
would actually be required that early.

Move this out of s_init(), into board_init_f(). Since this actually only
affects a very few older SoCs, the actual code goes into the cpu/armv7
directory, to move it out of the way for all other SoCs.

This also uses the opportunity to convert some #ifdefs over to the fancy
IS_ENABLED() macros used in actual C code.

We keep the s_init() stub around for now, since armv8's lowlevel_init
still relies on it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2022-02-04 00:09:57 +00:00
Andre Przywara
2564fce7ee sunxi: move Cortex SMPEN setting into start.S
According to their TRMs, Cortex ARMv7 CPUs with SMP support require the
ACTLR.SMPEN bit to be set as early as possible, before any cache or TLB
maintenance operations are done. As we do those things still in start.S,
we need to move the SMPEN bit setting there, too.

This introduces a new ARMv7 wide symbol and code to set bit 6 in ACTLR
very early in start.S, and moves sunxi boards over to use that instead
of the custom code we had in our board.c file (where it was called
technically too late).

In practice we got away with this so far, because at this point all the
other cores were still in reset, so any broadcasting would have been
ignored anyway. But it is architecturally cleaner to do it early, and
we move a core specific piece of code out of board.c.

This also gets rid of the ARM_CORTEX_CPU_IS_UP kludge I introduced a few
years back, and moves the respective logic into the new Kconfig entry.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:36 +00:00
Andre Przywara
5bc4cd05d7 sunxi: move non-essential code out of s_init()
So far all Allwinner based boards were doing some not-so-lowlevel-setup
in lowlevel's s_init() routine.
This includes the initial clock, timer and pinmux setup, among other
things. This is clearly out of the "absolute bare minimum to get started"
scope that lowlevel_init.S suggests for this function.

Since we have an SPL, which is called right after s_init(), move those
calls to our board_init_f() function. As we overwrite this only for
the SPL, this has the added benefit of not doing this setup *again*
shortly afterwards, when running U-Boot proper.

This makes gpio_init() to be called from the SPL only, so pull this code
into a CONFIG_SPL_BUILD protected part to avoid build warnings.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04 00:09:03 +00:00
Andre Przywara
68f08966b0 armv8: start.S: remove CONFIG_SYS_RESET_SCTRL code
There is some code that tries to "reset" the SCTLR_ELx register early in
the boot process. The idea seems to be to guarantee some sane settings
that U-Boot actually relies on, for instance running in little-endian
mode, with the MMU off initially.
However the current code has multiple problems:
- For a start, no platform or config defines the symbol that would
  enable that code.
- The code itself really only works if the bits that it tries to clear
  are already cleared:
  - If we run in big-endian mode initially, any previous loads would have
    been wrong already. That applies to the (optional) relocation code,
    but more prominently to the mask that it uses to clear those bits:
    "ldr x1, =0xfdfffffa" looks innocent, but actually involves a memory
    access to the literal pool, using the current endianness.
  - If we run with the MMU enabled, we are probably doomed already. We
    *could* hope that we are running with an identity mapping, but would
    need to do some cache maintenance to avoid losing dirty cache lines.
- The idea of doing a read-modify-write of SCTLR is somewhat
  questionable to begin with, because as the owner of the current
  exception level we should initialise all bits of this register with a
  certain fixed value.
- The code is unnecessarily complicated, and the function name is
  misspelled.

While those problems *could* admittedly be fixed, the point that is does
not seem to be used at all at the moment tells me we should just remove
this code, and be it to not give a bad example.

If people care, I could introduce some proper SCTLR initialisation code.
We are about to work this out for the boot-wrapper[1] as we speak, but
apparently we got away without doing this in U-Boot ever since, so it
might not be worth the potential trouble.

[1] https://lore.kernel.org/linux-arm-kernel/20220114105653.3003399-7-mark.rutland@arm.com/

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-03 12:15:37 -05:00
Alper Nebi Yasak
22eb7ba80e armv8: spl: Fix build with LINUX_KERNEL_IMAGE_HEADER
Setting LINUX_KERNEL_IMAGE_HEADER=y attempts to include an ARM64 Linux
kernel image header at the start of both U-Boot proper and SPL binaries.
However, some definitions that the image header uses are not included by
the SPL linker script, resulting in a build error. Include them the way
they are included in U-Boot proper's linker script to fix the error.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-02-03 12:15:33 -05:00
Vladimir Oltean
681adaa466 arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports
The commit in the Fixes: tag below broke traffic through switch ports
where the SERDES protocol requires in-band autoneg and this requirement
isn't described in the device tree: SGMII, QSGMII, USXGMII (with
2500Base-X, in-band autoneg isn't supported).

The LS1028A-QDS boards are not yet ready for syncing their device trees
with Linux, since Ethernet is missing there (but has been submitted):
https://lore.kernel.org/lkml/20211112223457.10599-11-leoyang.li@nxp.com/

When agreement is reached for the Ethernet support in Linux, there will
be a sync for these boards as well. For now, just enable in-band autoneg
to fix the breakage.

Fixes: e3789a7262 ("net: dsa: felix: configure the in-band autoneg property based on OF node info")
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
bee9fd2957 arm: dts: ls1028a-rdb: sync device tree with Linux
Allow device trees to be reused between Linux and U-Boot.
The source for these device trees is linux-next as of commit
bd8a9cd624c6 ("arm64: dts: ls1028a-rdb: update copyright"), which was
chosen because some changes needed to be done to the Linux DTs too,
before they could be shared:
https://lore.kernel.org/linux-arm-kernel/20211202141528.2450169-5-vladimir.oltean@nxp.com/T/#m6f63c92e75fa79a01144b2c2c6dc4776e7971395

There are two more commits on the RDB device tree which haven't been
picked up yet, because they have dependencies on the SoC device tree:

dd3d936a1b17 ("arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source")
b2e2d3e02fb6 ("arm64: dts: ls1028a-rdb: enable pwm0")

These will be picked up on the next resync.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
50c49ef2ff arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi
Reuse the scheme implemented by the Kontron SL28 boards in
commit d08011d7f9
("arm: dts: ls1028a: disable the PCIe controller by default")
and move the 'status = "okay"' lines for the PCIe controllers
inside a separate U-Boot dtsi for the LS1028A-RDB board. This way, the
existing Linux device tree can simply be dropped in.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
f33fad6f37 arm: dts: ls1028a-rdb: disable I2C buses 1 through 7
There is no I2C peripheral on these buses on the reference design board,
and the Linux device tree does not enable them either.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
5b0f8eeb3d arm: dts: ls1028a-rdb: disable DSPI nodes
There is no SPI peripheral on the LS1028A-RDB, therefore no reason to
enable these nodes in the U-Boot device tree (and Linux does not enable
them either).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
4a5362fc10 arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux
In a bit of a blunder, the blamed commit in the Fixes: tag below made
the mscc_felix switch driver look at the 'managed = "in-band-status"'
device tree property, forgetting that the U-Boot device tree had not
been updated to include that property, whereas the Linux one does.

The switch is therefore described in the device tree as not requiring
in-band autoneg, but the PHY driver for VSC8514 (drivers/net/phy/mscc.c)
still enables that feature. This results in a mismatch => no traffic.

This patch is a copy-paste of the Ethernet device tree nodes from Linux,
which resolves that issue. The device tree update also renames the
Ethernet PHY labels.

Fixes: e3789a7262 ("net: dsa: felix: configure the in-band autoneg property based on OF node info")
Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
5009b11bec arm: dts: ls1028a-rdb: sort nodes alphabetically
The nodes in the NXP LS1028A-RDB device tree are out of order, regroup
them alphabetically to have a simple delta when the Linux device tree is
brought in.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
aa0586247b arm: dts: lx2160a-rdb: use Linux compatible string for RTC
During the LS1028A-RDB sync with Linux device trees, it was observed
that the same RTC is present on the two boards, and the wrong compatible
string is used in both places. This change updates the RTC from the
LX2160A-RDB to use the compatible string that was established in Linux.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
41496cc330 arm: dts: ls1028a-rdb: use Linux compatible string for RTC
During this board's sync with Linux device trees, it was observed that
it doesn't use the same compatible string for the RTC node as in U-Boot.
This change makes the RTC compatible strings match, for a smoother sync.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
801f4b0cde arm: dts: ls1028a-qds: use Linux compatible string for RTC
The LS1028A-QDS board won't be synced with the Linux device trees right
now, since those are currently still in progress (Ethernet is missing).

However, while we're at converting the RDB, it can be observed that the
same RTC is present on the two boards, and the wrong compatible string
is used in both places. This change updates the RTC from the QDS to use
the compatible string that was established in Linux.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
246b7e6c9f arm: dts: lx2160a-qds: use Linux compatible string for RTC
During the LS1028A-RDB sync with Linux device trees, it was observed
that the same RTC is present on the two boards, and the wrong compatible
string is used in both places. This change updates the RTC from the
LX2160A-QDS to use the compatible string that was established in Linux.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
5d0b044e96 arm: dts: ls1088a-rdb: use Linux compatible string for RTC
During the LS1028A-RDB sync with Linux device trees, it was observed
that the same RTC is present on the two boards, and the wrong compatible
string is used in both places. This change updates the RTC from the
LS1088A-RDB to use the compatible string that was established in Linux.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-01 15:08:07 +05:30
Vladimir Oltean
489c428763 arm: dts: ls1088a-qds: use Linux compatible string for RTC
During the LS1028A-RDB sync with Linux device trees, it was observed
that the same RTC is present on the two boards, and the wrong compatible
string is used in both places. This change updates the RTC from the
LS1088A-QDS to use the compatible string that was established in Linux.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
2e14b1f33f arm/expu1/seli8: adapt dts NOR partition table to the latest used
Even not used by u-boot, this has to be inline with the hw and kernel dts.
U-boot partition table is defined by MTDPARTS_DEFAULT Kconfig.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:08:07 +05:30
Aleksandar Gerasimovski
7539bb3b7c arm: ls1021a: limit debug eth phy speed to 100Mbps
Beside that mounted rgmii debug phy is 1000Mbps capable, the debug link
between the piggy board and the phy is 100Mbps only.
This leads to longer link establishment time when working in debug mode,
as phy tries to autoneg 1000Mbps.

This patch fixes the speed to 100Mbps and allows smother link establishment
time for the debug interface.

Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Mathew McBride
a1d2fd3874 board: traverse: add initial Ten64 support
The Ten64 is a networking-oriented MiniITX board
using the NXP LS1088A SoC.

This patch provides the bare minimum to support
Ten64 boards under U-Boot for distroboot.

Some related drivers have not yet been submitted
and this basic support lacks some of the
opinionated defaults provided by our firmware
distribution.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01 15:04:24 +05:30
Tony Dinh
71dcfa97fa arm: kirkwood: Pogoplug-V4 : Add Kconfig files
Add Kconfig files for Pogoplug V4 board

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31 10:23:37 +01:00
Tony Dinh
cd1978719c arm: kirkwood: Pogoplug-V4 : Add DTS files
Add DTS files for Pogoplug V4 board

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-31 10:23:37 +01:00
Jernej Skrabec
e97943b732 sunxi: Fix H616 DRAM read calibration for dual rank
Although it isn't known what bit 0 in PHY reg 8 does, it's obvious that
it has to be set before read calibration and cleared afterwards. This is
already done for first rank, but not for second (copy & paste error.)

Fix it.

Fixes: f4317dbd06 ("sunxi: Add H616 DRAM support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:25:00 +00:00
Jernej Skrabec
18a5927698 sunxi: fix H616 DRAM ODT support
Kconfig symbol is missing CONFIG_ prefix, so compiler will always
skip ODT configuration.

Fix symbol name.

Fixes: f4317dbd06 ("sunxi: Add H616 DRAM support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:25:00 +00:00
Chris Morgan
52bcc4f053 sunxi: Add option to prevent booting on power plug-in
For sunxi boards with the AXP209, AXP221, AXP809, and AXP818 PMICs
(plus possibly others, I only confirmed the datasheets for these),
it is sometimes desirable to not boot whenever the device is
plugged in. An example would be when using the NTC CHIP inside a
PocketCHIP.
This provides a configurable option to check if bit 0 of
register 0 of the PMIC says it was powered because of a power button
press (0) or a plug-in event (1). If the value is 1 and this option
is selected, the device shuts down shortly after printing a message
to console stating the reason why it's shutting down. Powering up the
board with the power button is not affected.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
[Andre: reword to speak of boot, remove #ifdefs]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:25:00 +00:00
Andre Przywara
8695b5111c sunxi: gpio: Fix up pointer arithmetic
The calls for flipping bits in the Allwinner pin controller registers
were using unnecessarily complex pointer arithmetic.

Improve readability by simplifying the expression.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:25:00 +00:00
Samuel Holland
efdd656659 sunxi: gpio: Add per-bank drive and pull setters
The GPIO and pinctrl drivers need these setters for pin configuration.
Since they are DM drivers, they should not be using hardcoded base
addresses. Factor out variants of the setter functions which take a
pointer to the GPIO bank's MMIO registers.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:25:00 +00:00
Samuel Holland
ac5397a219 sunxi: gpio: Return void from setter functions
The return values of these functions are always zero, and they are
never checked. Since they are not needed, remove them.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-30 01:04:30 +00:00
Vignesh Raghavendra
afe5163449 ARM: dts: k3-am642-sk: Disable cpsw_port1 in SPL
ROM supports cpsw_port2 for Ethernet boot and SPL stages continue to
download images on the same port, therefore there is no need to enable
cpsw_port1. Disable the same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2022-01-28 17:58:41 -05:00
Heinrich Schuchardt
8e72374feb sandbox: eth-raw: fix building with musl library
The definition of struct udphdr in include netinet/udp.h in the
musl library differs from the definition in the glibc library.

To use the same definition with musl the symbol _GNU_SOURCE has
to be defined.

Reported-by: Milan P. Stanić <mps@arvanta.net>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
2022-01-25 14:02:38 -07:00
Simon Glass
9d2adca8c3 x86: Move acpi_get_rsdp_addr() ACPI tables to the writer
Move this over to use a writer file, moving the code from the x86
implementation.

There is no need to store a separate variable since we can simply access
the ACPI context.

With this, the original monolithic x86 function for writing ACPI tables
is gone.

Note that QEMU has its own implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
a7e53b93b1 x86: Move device-specific ACPI tables to a writer function
Move this over to use a writer function, moving the code from the x86
implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
78031ad431 x86: acpi: Update acpi_fill_csrt() to use acpi_ctx
Update this function to the newer style, so we can avoid passing and
returning an address through this function.

Also move this function out of the x86 code so it can be used by other
archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-01-25 11:44:36 -07:00
Simon Glass
85b8161b14 x86: Move CSRT table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
ef55f48788 x86: Move TCPA table to a writer function
Move this table over to use a writer function, for x86 only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
c797f98bcd x86: Move MADT table to a writer function
Move this table over to use a writer function, for x86 only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
9aacd83389 x86: Move TPM2 table to a writer function
Move this table over to use a writer function, for x86 only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
d953137526 x86: Move SSDT table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
379d3c1fd6 x86: Move FACP table into separate functions
Each board has its own way of creating this table. Rather than calling the
acpi_create_fadt() function for each one from a common acpi_write_fadt()
function, just move the writer into the board-specific code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-01-25 11:44:36 -07:00
Simon Glass
138d7ece70 x86: Move FADT table to a writer function
Move this table over to use a writer function, for x86 only.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
32af3261f7 x86: Move GNVS table to a writer function
Move this table over to use a writer function, for x86 only. Handle the
two cases

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
eacb6d0ba2 x86: Move DSDT table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.

Add a pointer to the DSDT in struct acpi_ctx so we can reference it later.

Disable this table for sandbox since we don't actually compile real ASL
code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
a53d38f80a x86: Move FACS table to a writer function
Move this table over to use a writer function, moving the code from the
x86 implementation.

Add a pointer to the DSDT in struct acpi_ctx so we can reference it later.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
94ba15a3f1 x86: Move base tables to a writer function
Use the new ACPI writer to write the base tables at the start of the area,
moving this code from the x86 implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
31c27eb830 x86: Use the ACPI table writer
Use the new ACPI writer to write the ACPI tables. At present this is all
done in one monolithic function. Future work will split this out.

Unfortunately the QFW write_acpi_tables() function conflicts with the
'writer' version, so disable that for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
cc1f8c3988 x86: acpi: Split out context creation from base tables
At present acpi_setup_base_tables() both sets up the ACPI context and
writes out the base tables.

We want to use an ACPI writer to write the base tables, so split this
function into two, with acpi_setup_ctx() doing the context set, and
acpi_setup_base_tables() just doing the base tables.

Disable the writer's write_acpi_tables() function for now, to avoid
build errors. It is enabled in a following patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
383bf1bc9e acpi: Move acpi_fill_header() to the generic header
This function is not x86-specific so move it into the common header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
437992d3a9 acpi: Use finer-grained control of ACPI-table generation
Rather than keying everything off ACPIGEN, use the main
GENERATE_ACPI_TABLE option to determine whether the core ACPI code
is included. Make sure these option are not enabled in SPL/TPL since we
never generate tables there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
0679cca507 sandbox: Allow building with GENERATE_ACPI_TABLE
At present this option is missing a header file, a function prototype and
the qfw driver needs a header included.

Fix these problems so we can enable this option on sandbox. This will
increase the build coverage.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
27ba6289fe x86: Tidy up use of CONFIG_ACPIGEN
This is enabled for quite a few boards which don't create ACPI tables.
Tidy this up by dropping the option for some boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
0153723590 arm: Allow supporting ACPI-table generation
Some ARM boards are using ACPI now. It seems that U-Boot should support
this method. Add ARM to the list of archs which can generate ACPI tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
233f0e35a3 x86: Move the acpi table to generic global_data
Allow this to be used on any arch. Also convert to using macros so that
we can check the CONFIG option in C code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Simon Glass
e1722fcb7d x86: Allow any arch to generate ACPI tables
These have sadly found their way to ARM now. Allow any arch to support
generating ACPI tables.

Disable this for the tools build.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25 11:44:36 -07:00
Patrice Chotard
22c0815eca configs: stm32mp15: Enable OF_BOARD flag
Since commit 9855034397 ("fdt: Don't call board_fdt_blob_setup()
 without OF_BOARD") board_fdt_blob_setup() is no more called on
STM32MP platforms in trusted boot which hangs during boot process.

Enable OF_BOARD flag to fix this issue.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-01-24 11:03:21 +01:00
Patrick Delaunay
94e561f84a stm32prog: add partition name in treat_partition_list error messages
Add the partition name and remove the line number in error messages
of treat_partition_list() to provide correct information to user of
STM32CubeProgrammer.

The "line number" value was confusing because it is incorrect here;
the index in  part_array[] is not aligned with the line number in
the parsed Layout file, because the empty lines and the lines beginning
by '#' are skipped during the first parsing in parse_flash_layout().

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 11:01:41 +01:00
Marek Vasut
332facce6f ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12
Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias and
PHY reset GPIO are now reinstated in SoM u-boot dtsi.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-01-24 10:57:56 +01:00
Marek Vasut
6b8bd70904 ARM: dts: stm32: Synchronize DHCOR DTs with Linux 5.15.12
Synchronize DH DHCOR DTs with Linux commit 25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias is
now reinstated in SoM u-boot dtsi, the PHY reset GPIO is reinstated in AV96
u-boot dtsi.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-01-24 10:57:56 +01:00
Patrick Delaunay
bd485f9bcc arm: dts: stm32mp15: alignment with v5.16
Device tree alignment with Linux kernel v5.16-rc5
- ARM: dts: stm32: set otg-rev on stm32mp151
- ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
- ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
- ARM: dts: stm32: fix SAI sub nodes register range
- ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:57:19 +01:00
Patrick Delaunay
5c68904fe1 stm32mp: correct the dependency for bootcount configs
Default value for CONFIG_SYS_BOOTCOUNT_SINGLEWORD and
CONFIG_SYS_BOOTCOUNT_ADDR are only needed when
CONFIG_BOOTCOUNT_GENERIC is used.

This patch avoids to define these configs when an other bootcount backend
is activated, for example for CONFIG_BOOTCOUNT_ENV.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:56:45 +01:00
Patrick Delaunay
d5e8119bae stm32mp: remove the bootcount activation
Today the bootcount is not managed by the Linux kernel for STM32MP15 as
we don't have driver to update the used backup register in TAMP and the
recovery command still executes the normal bootcmd with
'altbootcmd=run bootcmd'.

So the bootcount feature is never used, the config CONFIG_BOOTCOUNT_LIMIT
and the associated environment variable 'altbootcmd' can be removed to
reduce the U-Boot size.

Each boards can re-enable this feature later in their defconfig, if it is
needed, with the expected backend, for example CONFIG_BOOTCOUNT_GENERIC
or CONFIG_BOOTCOUNT_ENV.

CC: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:56:45 +01:00
Marek Vasut
3919aa1722 ARM: dts: stm32: Add DFU support for DHCOR recovery
This patch configures U-Boot SPL for DHCOR SoM to permit DFU upload of
SPL and subsequent u-boot.itb for recovery or commissioning purposes.

To start U-Boot on DHCOR based board, e.g. Avenger96, proceed as follows:
- Install dfu-util on the host PC (in debian this is package 'dfu-util')

- Power off the Avenger96 board.
- Connect both USB-serial console and USB-OTG microB ports to host PC.
- Switch Avenger96 to USB boot mode -- BOOT0..2 switches all set to 0.
- Power on the Avenger96 board.
- Verify using '$ dmesg' that a new device has been detected as follows:
    New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00
    New USB device strings: Mfr=1, Product=2, SerialNumber=3
    Product: DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000
    Manufacturer: STMicroelectronics

- Upload U-Boot SPL:
$ dfu-util -a 1 -D u-boot-spl.stm32
- Upload U-Boot proper:
$ dfu-util -a 0 -D u-boot.itb

- At this point, SPL will wait for user to press "Ctrl-C" on serial
  console. When ready to interact with U-Boot, press Ctrl-C to start
  the bootloader.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:55:06 +01:00
Marek Vasut
757c8387be arm: stm32mp: Fix USB boot device report
In case the SoC reports the boot device type is USB, it means the SPL was
loaded via BootROM DFU mode. Currently the spl_boot_device() returns boot
device as USB host, change it to DFU instead, so the SPL can continue the
DFU boot and load U-Boot via DFU.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-24 10:52:49 +01:00
Tom Rini
d323242b62 Merge https://source.denx.de/u-boot/custodians/u-boot-sh
- rzg2_beacon updates
2022-01-23 09:54:49 -05:00
Adam Ford
16f4d36c7b arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI
When booting from QSPI, the boot ROM appears to mux the QSPI
pins, but it's not guaranteed to be setup when booting from
eMMC.  Fix this by explicitly configuring the pinmux.

Signed-off-by: Adam Ford <aford173@gmail.com>
2022-01-22 23:12:56 +01:00
Tom Rini
da158ec5f2 Pull request for efi-2022-04-rc1-2
Documentation:
 
 * describe printf() format codes
 
 UEFI
 
 * enable more algorithms for UEFI image verification, e.g. SHA256-RSA2048
 
 General
 
 * simplify printing short texts for GUIDs
 * provide a unit test for printing GUIDs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmHoLnQACgkQxIHbvCwF
 GsQ25Q/9G5REcgmo9Hjv+2ri3VJJueIGRL1QeXDl84TxUYgYAtHj7zo/YaeacHKB
 RVBsQafU6vIuAq5YRJFKCSWCxjPJVUH9QO5QQz6RE14KoBh6OYUQP2wSf/+p6/sb
 47wfVtyAUEpCEz60eDj5EWrSPpH78BNW7MmKoTZWSgE1APaBTAHw/Uo6tnb52Qsv
 vQ73Q9R4s0hpsylVtmwIZ0udDcaJg3SQf/4glhnHxaUW/oMoRd0DU7Dnbbg2oxfd
 Y03J0zarqAdIjzNvADnUz6Ei2+H1TrzRe9tzhuXRuseZdANrUnzDIe6bdz+RCmkl
 sdBCmBDPoChosiAcaX9FkajaAi5XYpZ5Sitdpp9A8ZdVc0Lzr1XLbfLksJRM7WwM
 jSP/JDAGYzJqL86C4hrx46aERUuXgywf/vSM7UoG5OxbtMa/AqbHuXMOnd4jXGYD
 48fLlyMWlZ7+Kd4v3x9QlwSmM0LLsokn93JEWrJhJqFPzdHYUQifU2vlZmrJHWyS
 BjzCJxu+rCmXBO6wlcAvsF9V/kx5IO3CKIGn24UUt/wjSBu4VDO5oSzVseJxPBIQ
 vBV9qZfwKCk9U/F1VN43xvIKvcO+oK+pEE9FB5trffYGmHfSEmBwOq3LuHlyMpeJ
 L+TrJUsZstFtx0ZBmVB3YuERusb2z+x1osnifGJvUHCLqjCgvl0=
 =GoR6
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-04-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-04-rc1-2

Documentation:

* describe printf() format codes

UEFI

* enable more algorithms for UEFI image verification, e.g. SHA256-RSA2048

General

* simplify printing short texts for GUIDs
* provide a unit test for printing GUIDs
2022-01-22 15:43:36 -05:00
Patrick Delaunay
3425decf52 Convert CONFIG_AT91_EFLASH to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_EFLASH

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Eugen Hristev <eugen.hristev@microchip.com>
2022-01-21 14:01:35 -05:00
Simon Glass
d3877fba31 Convert CONFIG_BOOTP_SERVERIP to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_SERVERIP

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:35 -05:00
Simon Glass
d6b318de2f Convert CONFIG_TIMESTAMP to Kconfig
This converts the following to Kconfig:
   CONFIG_TIMESTAMP

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21 14:01:34 -05:00
Tom Rini
2d7a463e82 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- fdt_support: Add fdt_for_each_node_by_compatible() helper macro
  (Marek)
- turris_omnia: Fixup SATA or PCIe nodes at runtime in DT blob (Pali)
- pci_mvebu: Add support for Kirkwood PCIe controllers (Pali)
- SPL: More verifications for kwbimage in SPL (Pali)
- mvebu: Remove comphy_update_map() (Pali)
- Minor misc stuff
2022-01-20 12:40:20 -05:00
Tom Rini
280db76f15 Pull request doc-2022-04-rc1
Replace @return by Return: in code comments.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmHpCv4ACgkQxIHbvCwF
 GsRxNhAAkJXbngwkfdM5O3eZH2zuI0av9GDBLoFoxTWFviwDpCcyzb/XsQgZ8IE5
 Cff9Y6P/SlNPdoE4pvDFqAItvmrvcZ9b/oeAmhVDaMMv1dGEOV9uSQvuQkpJWt/V
 nHtRuCVjSK6qqor3fSTHNMyFcG+gkAG/+8T+KuU8gUDKECQgzJqgixcdKvTjF9jL
 DOIxVKAPRrxlzuJ0u2eovVSZFBB3mik7fnDmOGnbKjj87FvUuOZCX/VWCC5zMGmY
 eOi+C2ONnUleeivWAJrU6AxP28BkCR1q3U1F0LH2LVjolX8WZByYdzlBAOr3RkK0
 0sYxxShdrF+2cYmQP1/wo4z8AySkSBrbr6WTQ58i5vsqFm4sb1FF52cQHQOaFOaV
 Gp/NokHMuzhx7YQr4Ps0TvpROoW6L3Vt2SqA58FoHXzTvWpTi+terdAodL8rH3+1
 yGGNzYW6C79qqMKLclvuLvy/6IWf1UekTo45ocP47vhieRbxyGr8UZ8KMnX6Yx0e
 Y6U34K820fgfTLHM5MOgXMvBXqpskcWnR5hZWdrN9fJyqAZ7AxXQvdDDdIIEMPM9
 MBiFDH8seE62SkTbAEjrSU6RE76WovUISlegmBaB8ihs588au/BQCrsSxmNqT1SV
 SCp8D/GBSjwv+utWlneH6JKAIYxvpsgWeWzr27lA5F3m3j+5gKI=
 =iOT9
 -----END PGP SIGNATURE-----

Merge tag 'doc-2022-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request doc-2022-04-rc1

Replace @return by Return: in code comments.
2022-01-20 09:39:45 -05:00
Marek Behún
0d582a461e arm: mvebu: spl: Fix 100 column exceeds
Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Marek Behún
37241ce1ba arm: mvebu: spl: Use IS_ENABLED() instead of #ifdef where possible
Use the preferred
  if (IS_ENABLED(X))
instead of
  #ifdef X
where possible.

There are still places where this is not possible or is more complicated
to convert in this file. Leave those be for now.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Marek Behún
c894566c5d arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t
Checkpatch warns about using uint32/16/8_t instead of u32/16/8.

Use the preferred types.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Marek Behún
62ee75a30d arm: mvebu: spl: Print srcaddr in error message
Print the wrong srcaddr (spl_image->offset) in error message also for
SATA case.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Pali Rohár
402e84ee88 arm: mvebu: Check for kwbimage data checksum
Last 4 bytes of kwbimage boot image is checksum. Verify it via the new
spl_check_board_image() function which is called by U-Boot SPL after
loading kwbimage.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Pali Rohár
f830703f42 arm: mvebu: Check that kwbimage blockid matches boot mode
Each boot mode has its own kwbimage specified by blockid. So check that
kwbimage is valid by blockid.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Pali Rohár
2e0429bcc1 SPL: Add struct spl_boot_device parameter into spl_parse_board_header()
Add parameter spl_boot_device to spl_parse_board_header(), which allows
the implementations to see from which device we are booting and do
boot-device-specific checks of the image header.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Pali Rohár
66f874855c arm: mvebu: Check that kwbimage offset and blocksize are valid
There are certain restrictions for kwbimage offset and blocksize.
Validate them.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Pali Rohár
4364071362 pci: pci_mvebu: Add support for Kirkwood PCIe controllers
Kirkwood uses macros KW_DEFADR_PCI_MEM and KW_DEFADR_PCI_IO for base
address of PCIe mappings. Size of PCIe windows is not defined in any macro
yet, so export them in new KW_DEFADR_PCI_MEM_SIZE and KW_DEFADR_PCI_IO_SIZE
macros.

Kirkwood arch code already maps mbus windows for io and mem, so avoid
calling mvebu_mbus_add_window_by_id() function which would try to do
duplicate window mapping.

Kirkwood PCIe controllers already use "marvell,kirkwood-pcie" DT compatible
string, so mark pci_mvebu.c driver as compatible for it.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20 11:35:29 +01:00
Marek Behún
3058e283b8 fdt_support: Add fdt_for_each_node_by_compatible() helper macro
Add macro fdt_for_each_node_by_compatible() to allow iterating over
fdt nodes by compatible string.

Convert various usages of
    off = fdt_node_offset_by_compatible(fdt, start, compat);
    while (off > 0) {
        code();
        off = fdt_node_offset_by_compatible(fdt, off, compat);
    }
and similar, to
    fdt_for_each_node_by_compatible(off, fdt, start, compat)
        code();

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-20 11:35:29 +01:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Tom Rini
068415eade Xilinx changes for v2022.04-rc1
gpio:
 - Add modepin driver
 
 net:
 - Save random mac addresses to eth variable
 
 zynqmp gem:
 - Add support for mdio bus DT description
 - Add support for reset and SGMII phy configuration
 - Reduce timeout for MDIO accesses
 
 zynqmp clk:
 - Fix clock handling for gem and usb
 
 phy:
 - Add zynqmp phy/serdes driver
 
 serial:
 - Add one missing compatible string
 
 microblaze:
 - Symbol alignement
 - SPL fixups
 - Code cleanups
 
 zynqmp:
 - Various dt changes, DP pre-reloc, gem resets, gem clocks
 - Switch SOM to shared psu configuration
 - Move dcache handling to firmware driver
 - Workaround gmii2rgmii DT description issue
 - Enable broadcasts again
 - Change firmware enablement logic
 - Small adjustement in firmware driver
 
 versal:
 - Support new mmc@ DT nodes
 - Fix run time variable handling
 - Add missing I2C_PMC ID for power domain
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYeg7sQAKCRDKSWXLKUoM
 IVhJAKCAiNx/joEeFBJ0XgThtJzFhCjdMwCfYKY9Ewz4L0n2I56lDgR3UJroct0=
 =HtB+
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.04-rc1

gpio:
- Add modepin driver

net:
- Save random mac addresses to eth variable

zynqmp gem:
- Add support for mdio bus DT description
- Add support for reset and SGMII phy configuration
- Reduce timeout for MDIO accesses

zynqmp clk:
- Fix clock handling for gem and usb

phy:
- Add zynqmp phy/serdes driver

serial:
- Add one missing compatible string

microblaze:
- Symbol alignement
- SPL fixups
- Code cleanups

zynqmp:
- Various dt changes, DP pre-reloc, gem resets, gem clocks
- Switch SOM to shared psu configuration
- Move dcache handling to firmware driver
- Workaround gmii2rgmii DT description issue
- Enable broadcasts again
- Change firmware enablement logic
- Small adjustement in firmware driver

versal:
- Support new mmc@ DT nodes
- Fix run time variable handling
- Add missing I2C_PMC ID for power domain
2022-01-19 11:43:44 -05:00
Heinrich Schuchardt
d3adee1db8 sandbox: imply PARTITION_TYPE_GUID
CONFIG_PARTITION_TYPE_GUID=y is needed for testing some GPT related
functionality.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 16:16:33 +01:00
Tom Rini
b24b201b60 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
- Updates for a{3,7}y17lte platforms
2022-01-19 08:09:34 -05:00
Michal Simek
71efd45a5f arm64: zynqmp: Change firmware dependency
In case of mini U-Boot configurations there is no need to enable firmware
driver which just consume space for nothing. That's why add an option to
disable it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d439399160ff3374f2b39f54f7dd70fa8c8bfea0.1642162121.git.michal.simek@xilinx.com
2022-01-19 11:36:11 +01:00
Shravya Kumbham
d10807a06b arm64: xilinx: dts: Add dma properties to fix dtbs_check warnings
Update dma name and add #dma-cells properties to fix dtbs_check
warnings.

Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/fedbf83fd5c682b4d61905d2cb790d33c2f079d6.1642160644.git.michal.simek@xilinx.com
2022-01-19 11:33:50 +01:00