Commit graph

86552 commits

Author SHA1 Message Date
Christophe Leroy
62c5fae511 powerpc: mpc885: Add CPM USB-SOF microcode for CPM15 ERRATA
MPC885 CPU has the following ERRATA:

	When the USB controller is configured in Host mode, and the
	SOF generation (SFTE=1 in USMOD register) is being used,
	there may be false CRC error indication in other SCCs.
	Although the data is received correctly, the CRC result
	will be corrupted.

Add capability to load the related microcode to fix it.
The microcode binary data is copied from Linux kernel.

Other microcode will be added in following patch so make it
a Kconfig choice.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-05 07:26:53 +02:00
Christophe Leroy
3febc89563 powerpc: Force cast on memcpy_toio()
sparse reports the following warning:

  CHECK   arch/powerpc/cpu/mpc8xx/micropatch_usb_sof.c
arch/powerpc/cpu/mpc8xx/micropatch_usb_sof.c:29:9: warning: cast removes address space '<asn:2>' of expression
arch/powerpc/cpu/mpc8xx/micropatch_usb_sof.c:30:9: warning: cast removes address space '<asn:2>' of expression

This is because of (void *) casts for using memcpy() as a substitute.

Do like other architectures, __force the cast to silence the warning

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-05 07:26:53 +02:00
Mathew McBride
fb9df2c7c5 arm: dts: ten64: fix header typo and update copyright
Somehow, I managed to typo our company name in the U-Boot
and Linux kernel submissions.

Fix this and update the copyright year at the same time.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
7219c22e7f arm: dts: ten64: syncronise device tree with Linux
This synchronises the Linux device tree with U-Boot
(cp linux/..../fsl-ls1088a-ten64.dts uboot/..../fsl-ls1088a-ten64.dts),
as of Linux v6.2-rc5.

Missing from the U-Boot copy previously was the
Ethernet PCS definitions (required for linking with PHY in
Linux but not used by U-Boot) and various upstream
fixes and formatting changes.

The board microcontroller (which doesn't have a Linux driver)
has been moved to the -u-boot.dtsi, as well as the
spi0 quadspi alias (used by U-boot 'sf' but not valid for Linux).

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
51b9254e02 arm: dts: fsl-ls1088a: copy all missing bindings from Linux
This is effectively:

cp linux/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi \
   u-boot/arch/arm/dts/fsl-ls1088a.dtsi

Tested working with Ten64 board (LS1088A) booting openSUSE Tumbleweed.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
fd4f7b0158 arm: dts: fsl-ls1088a: move and sync existing bindings to be under /soc
Our [U-Boot] copy of fsl-ls1088a.dtsi had all the hardware under
the top level, until the DM_SERIAL implementation recently.

In this commit, remove any remaining devices (that were in U-Boot,
but not touched by previous patches in this series) to be under /soc,
updating to their upstream (Linux) bindings.

The bindings have been copied closest to their relative positions
in the Linux version, so the eventual result is that the U-Boot
and Linux fsl-ls1088a.dtsi will be identical.

The next commit will add the hardware bindings that were not
in U-Boot.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
1574500139 arm: dts: fsl-ls1088a: syncronise fsl-mc definition with Linux
This moves the fsl-mc device tree definition under the /soc
node, as well as adding interrupt and IOMMU definitions that
were not in U-Boot before.

There are slight differences between the two bindings
as we add a "simple-mfd" compatible to function
under U-Boot's driver model.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
ad558eff32 arm: dts: fsl-ls1088a: syncronise MDIO+PCS U-Boot definitions with Linux
Synchronise the MDIO controller definitions with Linux, so
the controllers will be usable when passing U-Boot's
control FDT to Linux.

This also adds the PCS (internal controller) definitions
which are not used by U-Boot.

Caveat: The kernel definition uses "fsl,fman-memac-mdio",
as with other members of the Layerscape family, but
U-Boot uses a different driver for the DPAA2
Family devices (LS1088/LS2088/LX2160). So
we use "fsl,ls-mdio" as the first compatible string
for these devices.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
10ff7e6b04 arm: dts: fsl-ls1088a: sync usb controller nodes with Linux
Synchronise the USB device tree definition with Linux, allowing
the U-Boot control FDT to be used to boot a Linux system with
working USB.

An extra compatible string, "fsl,layerscape-dwc3" is needed
for special handling in U-Boot, so has been added to the
-u-boot.dtsi file. It might be better to add this to the
Linux source bindings.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:04 +08:00
Mathew McBride
38976a0666 arm: dts: fsl-ls1088a: move I2C nodes under "soc" and syncronize with Linux
U-Boot's definition for the I2C controllers did not contain any
clock information. This resulted in the I2C not functioning when
the U-Boot control FDT was passed to Linux.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
e8ab9840b5 arm: dts: fsl-ls1088a: move GPIO controller under "soc" per Linux
Move the GPIO controller definitions under the "soc" and in
the same relative position as the Linux kernel fsl-ls1088a.dtsi.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
2d6fce16c6 arm: dts: fsl-ls1088a: import CPU definition from Linux kernel
This is required for Linux to boot using the same FDT as
U-Boot (such as passing the control FDT to bootefi).

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
843f60b4e8 arm: dts: fsl-ls1088a: match Linux FDT by disabling PCIe by default
The Linux kernel fsl-ls1088a.dtsi disables (status="disabled")
all PCIe controllers by default, with the bootloader (i.e U-Boot)
enabling the appropriate controllers (specified by the board
reset control word/RCW) by FDT fixup.

However, U-Boot needs these controllers to be enabled
to be usable, which we can add in the u-boot only dtsi.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
f365e3cc91 arm: dts: fsl-ls1088a: sync PCIe controller definition with Linux
This moves the PCIe controller definitions under /soc and adopts
the same bindings (fsl,ls1088a-pcie) as Linux. Previously,
the format was different between the two versions.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
c2509a36d3 arm: dts: fsl-ls1088a: import and sync full SMMU nodes with Linux
To synchronise the device tree in U-Boot with Linux, the GIC
(Interrupt Controller) and SMMU/IOMMU nodes need to be synchronised
before changing any dependent components like PCIe and DPAA2/fsl-mc.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
e0f74092af pci: layerscape: add support for kernel/official fsl, ls1088a-pcie binding
This allows the Layerscape PCIe RC driver to use the upstream
style binding (two "reg" entries instead of four).

It is similar to the previous commit e10da1f985
("pci: layerscape: add official ls1028a binding support")
which implemented this for the LS1028A.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
d8a8b63397 arm: dts: fsl-ls1088a: move memory node into U-Boot specific file
The top-level "memory" node does not exist in the Linux
version of the fsl-ls1088a.dtsi file. Move it to the U-Boot
"tweak" file, so we can have an identical copy of
fsl-ls1088a.dtsi between the projects in the end.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
2591487865 arm: dts: fsl-ls1088a: move u-boot bootph tags into u-boot only files
This moves the bootph-all tags that were added in commit a593c1fec5
("arch: arm: dts: fsl-ls1088a.dtsi: tag serial nodes with bootph-all")
into a u-boot only include.

Due to the way the U-Boot device tree "tweak" system is setup[1],
we need to have a per-board <boardname>-u-boot.dtsi, which will
include the "fsl-ls1088a-u-boot.dtsi" tweaks.

By doing so, future updates to fsl-ls1088a.dtsi from upstream
(Linux kernel) can just be copied directly into the U-Boot tree,
without worrying about any extra data local to U-Boot.

Signed-off-by: Mathew McBride <matt@traverse.com.au>

[1] - https://u-boot.readthedocs.io/en/latest/develop/devicetree/control.html#adding-tweaks-for-u-boot
The CONFIG_SYS_SOC, CONFIG_SYS_CPU and CONFIG_SYS_VENDOR
values are the same for the entire Layerscape family,
meaning there is no ability to create a LS1088A only
file here. But we will be adding per-board tweaks
later in any case.
Reviewed-by: Peng Fan <peng.fan@nxp.com>

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
7fb6032bae configs: ten64: enable DM_SERIAL
The recent series "Convert LS1088A and LX2160 to DM_SERIAL"
from Ioana Ciornei provided the necessary support to enable
DM_SERIAL on the Ten64 board (LS1088A).

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Mathew McBride
8586a93868 armv8: fsl-layerscape: check for crypto node first in fdt_fixup_remove_jr
This a problem I found while updating the U-Boot fsl-ls1088a.dtsi
to match the Linux version.

fdt_fixup_remove_jr did not check whether there was a "crypto"
alias in the device tree before calling more fdt_* functions,
which resulted in a crash.

Fixes: a797f274
("ARMv8/sec_firmware : Update chosen/kaslr-seed with random number")

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB
2023-05-05 09:46:03 +08:00
Tom Rini
0160d58218 Merge branch '2023-05-04-assorted-TI-updates'
- Clean up / merge some defconfigs, update DDR timings and a few more
  assorted fixes.
2023-05-04 20:57:59 -04:00
Neha Malcom Francis
1e666512fb arm: dts: k3-j7200: ddr: Update to 0.6 version of DDR config tool
Update the DDR settings to those generated using 0.6 version of
Jacinto 7 DDRSS Register Configuration tool.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-05-04 19:51:59 -04:00
Neha Malcom Francis
b99d710fe0 arm: dts: k3-j721e: ddr: Update to 0.9.1 version of DDR config tool
Update the DDR settings to those generated using 0.9.1 version of
Jacinto 7 DDRSS Register Configuration tool.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-05-04 19:51:59 -04:00
Manorit Chawdhry
bebe2f66f5 configs: j7200: Merge the HS and non-HS defconfigs
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.

Non-HS devices will continue to boot due to runtime device type detection.
If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS
devices these can be ignored.

Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-04 13:07:05 -04:00
Manorit Chawdhry
30a7ee87fd Kconfig: j721s2: Change K3_MCU_SCRATCHPAD_BASE to non firewalled region
On K3 HS-SE devices all the firewalls are locked by default
until sysfw comes up. Rom configures some of the firewall for its usage
along with the SRAM for R5 but the PSRAM region is still locked.

The K3 MCU Scratchpad for j721s2 was set to a PSRAM region triggering the
firewall exception before sysfw came up. The exception started happening
after adding multi dtb support that accesses the scratchpad for reading
EEPROM contents.

Old map:
┌─────────────────────────────────────┐ 0x41c00000
│                 SPL                 │
├─────────────────────────────────────┤ 0x41c61f20 (approx)
│                STACK                │
├─────────────────────────────────────┤ 0x41c65f20
│             Global data             │
│  sizeof(struct global_data) = 0xd8  │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c66000
│                HEAP                 │
│  CONFIG_SYS_MALLOC_F_LEN = 0x10000  │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│               SPL BSS               │ (0x41c76000)
│  CONFIG_SPL_BSS_MAX_SIZE = 0xA000   │
├─────────────────────────────────────┤ (0x41c80000)
│               DM DATA               │
├─────────────────────────────────────┤ (0x41c84130) (approx)
│                EMPTY                │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
				        (0x41cffbfc)

New map:
┌─────────────────────────────────────┐ 0x41c00000
│                 SPL                 │
├─────────────────────────────────────┤ 0x41c61f20 (approx)
│                STACK                │
├─────────────────────────────────────┤ 0x41c65f20
│             Global data             │
│  sizeof(struct global_data) = 0xd8  │
├─────────────────────────────────────┤ gd->malloc_base = 0x41c66000
│                HEAP                 │
│  CONFIG_SYS_MALLOC_F_LEN = 0x10000  │
├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR
│               SPL BSS               │ (0x41c76000)
│  CONFIG_SPL_BSS_MAX_SIZE = 0xA000   │
├─────────────────────────────────────┤ (0x41c80000)
│               DM DATA               │
├─────────────────────────────────────┤ (0x41c84130) (approx)
│                EMPTY                │
├─────────────────────────────────────┤ SYS_K3_MCU_SCRATCHPAD_BASE
│              SCRATCHPAD             │ (0x41cff9fc)
│ SYS_K3_MCU_SCRATCHPAD_SIZE = 0x200  │
└─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX
				        (0x41cffbfc)

Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-04 13:06:22 -04:00
Manorit Chawdhry
2cc4d4f853 configs: j721s2: Merge the HS and non-HS defconfigs
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.

Non-HS devices will continue to boot due to runtime device type detection.
If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS
devices these can be ignored.

Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-04 13:04:30 -04:00
Jan Kiszka
fca76cda28 arm: dts: iot2050: Include u-boot specific bits implicitly
Create *-u-boot.dtsi files for each target dtb of the IOT2050 series so
that we can drop the #include deviations from upstream dts[i] files
here.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2023-05-04 13:03:54 -04:00
Andrew Davis
837833a724 environment: ti: Add get_fit_config command to get FIT config string
When OE is packaging a dtb file into the FIT image it names the node based
on the dtb filename. Node names can't have "/" so it is turned into "_".
We select our FIT config using the "fdtfile" env var so we don't duplicate
the board_name to fdt logic. Result is fdtfile needs mangled when used to
select a config node from OE made FIT image. Do this here.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-04 13:03:54 -04:00
Praneeth Bajjuri
8f3e2d14a6 configs: am62x: enable secure device configs by default
Enable the CONFIG_TI_SECURE_DEVICE by default

Non-HS devices will continue to boot due to runtime device type detection.

TI's security enforcing SoCs will authenticate each binary it loads by
comparing it's signature with keys etched into the SoC during the boot
up process. The am62x family of SoCs by default will have some level of
security enforcement checking. To keep things as simple as possible,
enable the CONFIG_TI_SECURE_DEVICE options by default so all levels of
secure SoCs will work out of the box

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
2023-05-04 13:03:54 -04:00
Neha Malcom Francis
8048a34376 k3: pmic: Clear ESM masks
ESM MCU masks must be set to 0h so that PMIC can handle errors
that require attention for example SYS_SAFETY_ERRn. The required bits
must be cleared: ESM_MCU_RST_MASK, ESM_MCU_FAIL_MASK, ESM_MCU_PIN_MASK.

If PMIC expected to handle errors, make sure EVM is configured to
connect SOC_SAFETY_ERRz (Main) to the PMIC.

Note that even though the User Guide for TPS65941 for J721E mentions
that these bits are reset to 0h; it is not reflected once board boots to
kernel, possibly due to NVM configurations. Eithercase, it is best to
account for this from R5 SPL side as well.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
2023-05-04 13:03:54 -04:00
Tom Rini
7f30eec177 Merge branch '2023-05-03-assorted-updates-and-fixes'
- Various typo fixes, pass -Werror to host tools builds, bdi cleanups,
  fix hush and local variables, a FSL PCI fix and correct some python in
  one of the tests.
2023-05-04 11:49:30 -04:00
Tom Rini
bfce695104 Pull request efi-2023-07-rc2
Documentation:
 
 * treat documentation warnings as errors in CI
 * adjust StarFive VisionFive 2 and SiFive Unmatched documentation
 * man-page for cp
 * correct description of uclass_get_device_by_of_path
 * correct proftool usage
 
 UEFI
 
 * Fix documentation of EFI Python tests
 * Rename efi_selftest Python test
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmRTkwoACgkQxIHbvCwF
 GsTiPQ//TN731zB89CHA/MKUyBoggoyBW0v97gxzFw+WFywzWdY2zOegdEe+RUwQ
 wLZ7hwubaxVaUDTHg9o3VmtJDunqs/Yg7TeLjd+Ra6s/9HIC96vJCfGvLimIcigo
 BipKQISnwGtxToNc7SEt+TLxXLT+9+bsAceUzYT1YXBDfV9Wt9pySiqm2Pvolmvk
 RRdzfodr5Uf1TdGKkLI16y/AuKLgxYkgBKabYz115p0h6am19ES1i+2rqm1T3FHg
 CyE6zZcioa6KEe002njVN29eygw8gK77jIkIiP6dYedEu02EssDoyZU24anCkvmP
 enl8wN8ZStwm5pgLbV398DSvMKG5fS85Yo2TBsUsGWzqBE3uqwu44NbXz5rQttMs
 wrvuHkuf/Of4rq2lavv2EUayd9O7P0wS1cChYUs5c3a1MY5dWItvjMo5R5WO2XU2
 HksbQJiPI0bX5c74wq4HfdDlxeIUirsKB6fOzS7EgWYLgy2tuCbvdfhjIxQr+pkt
 I4AuSsZDbjvN8qbOs7UDGP5QzzqWO5tsLCjmrAt3KzyLTAEjf5tKt+cGPX/lutoW
 IbcXhPlcTIBKyptN+dfx+aFasXiZogqUw7zW1NvacmtDMEsnZJRU2ITFvV16JyHe
 dxYv86DkHLcvd0jz/IOCXbNtxJPLkuXZlync6Y99BRvhPbASMI0=
 =f+70
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request efi-2023-07-rc2

Documentation:

* treat documentation warnings as errors in CI
* adjust StarFive VisionFive 2 and SiFive Unmatched documentation
* man-page for cp
* correct description of uclass_get_device_by_of_path
* correct proftool usage

UEFI

* Fix documentation of EFI Python tests
* Rename efi_selftest Python test
2023-05-04 09:03:02 -04:00
Christophe Leroy
bebb8dfabc powerpc: mpc8xx: Reorganise init RAM
Using SMC relocation microcode patch or USB-SOF microcode patch
will disable DPRAM memory from 0x2000 to 0x2400 and from 0x2f00
to 0x3000.

At the time being, init RAM is setup to use 0x2800-0x2e00, but
the stack pointer goes beyond 0x2800 and even beyond 0x2400.

For the time being we are not going to use any microcode patch
that uses memory about 0x3000, so reorganise setup to use:
- 0x2800 - 0x2e00 for init malloc and global data and CPM buffers
- 0x3000 - 0x3c00 for init stack

For more details about CPM dual port ram, see
commit b1d62424cb ("powerpc: mpc8xx: redistribute data in CPM dpram")

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 12:40:47 +02:00
Heinrich Schuchardt
8a6414d1e4 CI: treat documentation warnings as errors
We do not want to merge documentation that produces Sphinx warnings.

scripts/kernel-doc uses environment variable KDOC_WERROR to determine
if warnings should be treated as errors.

Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 11:15:12 +02:00
Christophe Leroy
fdd243d81b powerpc: mpc8xx: CPM parameter RAM can be anywhere
With relocation, CPM parameter RAM can be anywhere in the
dual port RAM, so don't split dual port RAM.

Remove dparam and dparam16 members of struct comm_proc

PROFF_XXX become offsets from the start of dual port RAM,
then they are now consistant with the offsets in RPBASE
registers.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Christophe Leroy
019b39b736 board: cssi: Load CMPC885's motherboard FPGA earlier
In order to know the motherboard type earlier, perform I/O ports
initialisation and FPGA loading in board_early_init_f() instead
of board_early_init_r().

This is needed to be able to load mpc8xx CPM microcode base on
motherboard type and before starting to use the CPM.

Console is not available yet so remove the printfs.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Christophe Leroy
756af9ab83 board: cssi: Remove stale macro from cmpcpro.c
Three unused macros were left over. Remove them.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Christophe Leroy
66d23d2237 board: cssi: Remove duplicated FPGA loading sequence on CMPC885
A duplicated FPGA loading sequence appears after FPGA reset.

Remove it.

Fixes: dac3c6f625 ("board: cssi: Add new board MCR3000_2G")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2023-05-04 10:58:07 +02:00
Simon Glass
27a03f03b2 efi: Rename the base efi self-test
This function uses the same base name as all the others in this file, so
it is not easy to run just that one test. Add a _base suffix so that it
can be run on its own.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
feff3e6c38 doc: man-page for cp
Add a man-page for the cp command.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
bd730aa05b test: fix pydoc issues for EFI tests
Fix issues reported by pydocstyle.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
d1474f5aa0 doc: correct HiFive Unmatched boot description
Main U-Boot is loaded by sector number, not by partition GUID type.

Fixes: 70415e1e52 ("board: sifive: add HiFive Unmatched board support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
eb59b9e88b doc: fix StarFive VisionFive v2 documentation
The number of the partition that U-Boot SPL loads the main U-Boot from is
defined as 2 by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2. The
partition type GUID is not used currently.

Reword the description of the boot process to make it clearer.

Fixes: 5ecf9b0b8a ("board: starfive: add StarFive VisionFive v2 board support")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
e942fabe8a doc: Indicate required OpenSBI release for VisionFive 2
Support for the VisionFive 2 board is not contained in the most recent
OpenSBI release (v1.2).

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-05-04 09:57:43 +02:00
Pavel Skripkin
d53b2cfe08 docs: fix wrong proftool usage
Guide shows incorrect usage of proftool, which is confusing. If proftool
is used w/o '-o' argument it complains like following

$ ./sandbox/tools/proftool -m sandbox/System.map -t trace dump-ftrace > trace.dat
Must provide trace data, System.map file and output file
Usage: proftool [-cmtv] <cmd> <profdata>

s/>/-o/ fixes it and proftool outputs decoded data to trace.dat

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Alexander Shirokov
962424a873 doc: mmc: drop 0x prefixes in read/write examples
The patch drops 0x prefixes because all numbers are interpreted as HEX
by default.

Also, it fixes the mismatch between input arguments and output at 'mmc
write' example. Now it's 256 (0x100) blocks.

Signed-off-by: Alexander Shirokov <shirokovalexs@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
f8816a8a91 dm: core: fix introduce uclass_get_device_by_of_path
Correct the function documentation.

Fixes: ca031c0827 ("dm: core: introduce uclass_get_device_by_of_path()")
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Heinrich Schuchardt
d0d0e776cf tools: fix TestFdtUtil()
Variable old_outdir cannot be used before assignment.
The assignment must occur before the try block.

tools/dtoc/test_fdt.py:796:26:
E0601: Using variable 'old_outdir' before assignment
(used-before-assignment)

Add missing space in assignment.

Fixes: a004f29464 ("binman: Tidy up _SetupDtb() to use its own temporary file")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-04 09:57:43 +02:00
Pali Rohár
0d734df4a4 pci: fsl: Do not access PCI BAR0 register of PCIe Root Port
Freescale PCIe Root Port has PEXCSRBAR register at position of PCI BAR0.
PCIe Root Port does not have any PCIe memory, so returns zero when trying
to read from PCIe Root Port BAR0 and ignore any writes.

Signed-off-by: Pali Rohár <pali@kernel.org>
2023-05-03 18:30:46 -04:00
Simon Glass
43bdb3b39a buildman: Pass -Werror to the host compiler too
The host compiler is not failing on warnings at present, when the
-E flag is used in buildman. Add the required flag to fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com>
2023-05-03 18:30:46 -04:00