Commit graph

2797 commits

Author SHA1 Message Date
Mike Frysinger
baf3570503 Blackfin: bf533-stamp: back down SCLK a bit
While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher
SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with
the shortened SDRAM traces.  So lower the SCLK speed down to a value that
all three can handle.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:16:01 -04:00
Kim Phillips
9993e196da mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-18 19:43:04 -05:00
Wolfgang Denk
a694610d33 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
Wolfgang Denk
2eb99ca802 NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 21:56:15 +02:00
Wolfgang Denk
7024aa14df at91cap9adk: fix #ifdef/#endif pairing
The #ifdef/#endif pairing in this file was obviously messed up.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 20:46:38 +02:00
Prafulla Wadaskar
4abc5bffea Marvell MV88F6281GTW_GE Board support
This is Marvell's 88F6281_A0 based custom board developed
for wireless access point product

This patch is tested for-
1. Boot from DRAM/SPI flash/NFS
2. File transfer using tftp and loadb
3. SPI flash read/write/erase
4. Booting Linux kernel and RFS from SPI flash
5. Boot from USB supported

Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-18 20:41:42 +02:00
Prafulla Wadaskar
55dd4ba541 Marvell Sheevaplug Board support
Reference:
http://plugcomputer.org/
http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support

This patch is tested for-
1. Boot from DRAM/NAND flash
2. File transfer using tftp
3. NAND flash read/write/erase
4. Linux kernel and RFS Boot from NAND
5. Enabled USB PHY init for kernel need
6. Boot from USB supported

Note: to boot Kirkwood kernel with USB support,
	you should add "usb start" in the boot sequence

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-18 18:46:09 +02:00
Wolfgang Denk
9ff59601c7 MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefined
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 16:36:11 +02:00
Wolfgang Denk
170c19725e NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 15:32:10 +02:00
Jean-Christophe PLAGNIOL-VILLARD
52cb4d4fb3 stdio/device: rework function naming convention
So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 00:27:46 +02:00
Scott Wood
2419169f57 Remove legacy NAND and disk on chip references from boards.
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-17 15:03:28 -05:00
Anton Vorontsov
b8b71ffbc3 mpc83xx: MPC8315ERDB: Use hwconfig for board type selection
This patch simply converts the board to the hwconfig infrastructure.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:47:01 +02:00
Anton Vorontsov
c78c678354 mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device tree
fdt_fixup_esdhc() will either disable or enable eSDHC nodes, and
also will fixup clock-frequency property.

Plus, since DR USB and eSDHC are mutually exclusive, we should
only configure the eSDHC if asked through hwconfig.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:25:43 +02:00
Anton Vorontsov
c9646ed758 mpc83xx: MPC837XERDB: Add support for FSL eSDHC
This patch adds support for eSDHC on MPC837XERDB boards. The WP
switch doesn't seem to work on RDB boards though, the WP pin is
always asserted (can see the pin state when it's in GPIO mode).

FSL DR USB and FSL eSDHC are mutually exclusive because of pins
multiplexing, so user should specify 'esdhc' or 'dr_usb' options
in the hwconfig environment variable to choose between the
devices.

p.s.
Now we're very close to a monitor len limit (196 bytes left using
gcc-4.2.0), so also increase the monitor len by one sector (64 KB).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:25:34 +02:00
Kim Phillips
4a9932a436 mpc83xx: increase MONITOR_LEN to offset growing pains
Saving the environment leads to overwriting u-boot itself,
bricking boards.  Increase u-boot's image size so the environment
base address doesn't end up overlapping u-boot text.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-14 14:58:39 -05:00
Valeriy Glushkov
c31e13260b usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)
Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-14 14:55:46 -05:00
Kim Phillips
d9ac3d5a17 mpc83xx: set 64BIT_VSPRINTF for boards using nand_util
When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Ron Madrid <ron_madrid@sbcglobal.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-07-14 14:47:21 -05:00
TsiChung Liew
052c089165 ColdFire: Update bootargs
Add a bootargs for M53017EVB and update bootargs
for M54451EVB

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:46:42 -05:00
TsiChung Liew
ee0a846246 ColdFire: Add DSPI support for MCF5227x and MCF5445x
Remove individual CPU specific DSPI driver.
Add required feature for the common DSPI driver in cpu_init and
in platform configuration file.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:46:34 -05:00
TsiChung Liew
4567c7bff2 ColdFire: Fix M53017EVB flash size
Increase the flash size from 8MB to 16MB

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:20 -05:00
TsiChung Liew
bf9a521529 ColdFire: Add M5208EVB and MCF520x CPU support
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:17 -05:00
TsiChung Liew
709b384b64 ColdFire: Update for M54451EVB
Update serial boot DRAM's Internal RAM, vector table and DRAM in
start.S, serial flash's read status command over SPI and NOR
flash.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:14 -05:00
TsiChung Liew
bbf6bbffca ColdFire: Update configuration file to use flash buffer write
Update M52277EVB, M53017EVB and M54455EVB platform configuration
file to use flash buffer write

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:10 -05:00
Wolfgang Denk
7d4450a977 mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:49 +02:00
Wolfgang Denk
1f1f82f3de aria: add JFFS2 and MTDPARTS support; adjust flash map
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:47 +02:00
Wolfgang Denk
a6d6d46a4f aria: enable NAND flash support
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:45 +02:00
Wolfgang Denk
13946925e8 MPC512x: fix typo in comment listing the NAND driver name
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:02:44 +02:00
Wolfgang Denk
2ca6f74d09 mecp5123: cleanup - remove dead code
Remove dead code that was obviously a left-over from copy & paste.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:02:43 +02:00
Wolfgang Denk
25671c8672 aria: adjust memory controller initialization
Needed for Rev. 2 silicon at 400 MHz

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:42 +02:00
Wolfgang Denk
f5489c4200 MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF
When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:00:39 +02:00
Wolfgang Denk
87abce6e91 Merge branch 'master' of /home/wd/git/u-boot/master 2009-07-14 00:00:04 +02:00
Wolfgang Denk
bb272ec8df Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:45:10 +02:00
Wolfgang Denk
c3ae126c2c Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-07-13 23:45:02 +02:00
Wolfgang Denk
4b96cb6777 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:37:59 +02:00
Wolfgang Denk
ed01c4f59d Merge branch 'master' of git://git.denx.de/u-boot-sh 2009-07-13 23:37:55 +02:00
Wolfgang Denk
70ad83376d Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:33:20 +02:00
Jean-Christophe PLAGNIOL-VILLARD
986922714f versatile: update config and merge to cfi flash driver
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
2009-07-12 21:59:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
d6e8ed832b versatile: specify the board type on the prompt
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
2009-07-12 21:59:50 +02:00
Sedji Gaouaou
5ccc2d99d6 at91: Introduction of at91sam9g10 SOC.
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
2009-07-12 17:56:11 +02:00
Sedji Gaouaou
22ee647380 at91: Introduction of at91sam9g45 SOC.
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
2009-07-12 17:43:34 +02:00
Nobuhiro Iwamatsu
04366d070a sh: Update pci config for Renesas r7780mp board
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-11 09:03:41 +09:00
Nobuhiro Iwamatsu
74d9c16a68 sh: Add support ESPT-GIGA borad
ESPT-Giga is SH7763-based reference board.
Board support is relatively sparse, presently supporting serial,
gigabit ethernet, USB host, and MTD.

More information (in Japanese) available at:
http://www.cente.jp/product/cente_hard/ESPT-Giga.html

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-11 09:02:21 +09:00
Timur Tabi
890d242fac remove _IO_BASE and KSEG1ADDR from board configuration files
The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet
driver, but the code that used that macro was removed over a year
ago, so board configuration files no longer need to define it.

The _IO_BASE macro is also automatically defined to 0 if it isn't
already set, so there's no need to define that macro either in the
board configuration files.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andy Fleming <afleming@freescale.com>
Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-11 00:19:16 +02:00
Jon Smirl
c9969947a4 board support patch for phyCORE-MPC5200B-tiny
Add support for the Phytec phyCORE-MPC5200B-tiny.
Code originally from Pengutronix.de.
Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on
Timer 0/1

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2009-07-10 23:21:32 +02:00
Harald Krapfenbauer
ed540f07b8 Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-on
The cm-bf561 module can easily hook up to the EXT-BF5xx-USB-ETH2 extender
board, so add a simple example of how to do that in the board config.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-10 02:36:30 -04:00
Mike Frysinger
f8bf54b408 Blackfin: blackstamp: update spi flash settings
The latest blackstamp boards can only run the SPI flash at 15MHz before
they start to crap out, so lower the max speeds accordingly.  The new SPI
flash also has different sector requirements, so update the environment
sizes as well.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-10 02:36:28 -04:00
Wolfgang Denk
d073aeea4f Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-07-08 22:01:50 +02:00
Felix Radensky
26d37f0061 ppc4xx: Fix FDT EBC mappings on Canyonlands
This patch fixes 2 problems with FDT EBC mappings on Canyonlands.
First, NAND EBC mapping was missing, making Linux NAND driver
unusable on this board. Second, NOR remapping code assumed that
NOR is always on CS0, however when booting from NAND NOR is on CS3.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-08 10:59:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
be45c63256 sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-08 11:43:16 +09:00
Jean-Christophe PLAGNIOL-VILLARD
8dd29c87ba sh3/sh4: fix CONFIG_SYS_HZ to 1000
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-08 11:43:15 +09:00
Guennadi Liakhovetski
b74ab73736 nand_spl: read environment early, when booting from NAND using nand_spl
Currently, when booting from NAND using nand_spl, in the beginning the default
environment is used until later in boot process the dynamic environment is read
out. This way environment variables that must be interpreted early, like the
baudrate or "silent", cannot be modified dynamically and remain at their
default values. Fix this problem by reading out main and redundand (if used)
copies of the environment in the nand_spl code.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:07 -05:00
Mike Frysinger
cd84423a09 mtd: nand: new base driver for memory mapped nand devices
The BF537-STAMP Blackfin board had a driver for working with NAND devices
that are simply memory mapped.  Since there is nothing Blackfin specific
about this, generalize the driver a bit so that everyone can leverage it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:04 -05:00
Wolfgang Denk
8e5e9b940c Coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-07 22:35:02 +02:00
Wolfgang Denk
a48ecc969f Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	drivers/spi/Makefile

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-07 22:22:05 +02:00
Wolfgang Denk
bec9cab929 Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx 2009-07-07 21:06:07 +02:00
Magnus Lilja
d08e5ca301 MX31: Add NAND SPL boot support to i.MX31 PDK board.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-07-06 21:53:18 +02:00
Alessandro Rubini
095a460b49 arm nomadik: use 1000 as HZ value and rewrite timer code
This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites
timer code, which is now both correct and much smaller.  Unused
functions like udelay_masked() have been removed as no driver uses
them, even the ones that are not currently active for this board.
mtu.h is copied literally from the kernel sources.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:53:08 +02:00
Alessandro Rubini
f7aa59b29a arm nomadik: allow Nand and OneNand to coexists
The evaluation kit has both Nand and OneNand, both drivers are there
and the two configurations only select a different default for the
jffs partition. This adds the OneNand driver and cleans up storage.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-07-06 21:53:06 +02:00
Alessandro Rubini
fd14c41a86 arm nomadik: cleanup reset
There is only one public release of the Nomadik chip, so the ifdef
in reset code as well as a define in the config file are not needed

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-07-06 21:53:03 +02:00
Alessandro Rubini
ee1363f2da arm nomadik: rename board to nhk8815
This is an error in my side in the initial submission: nobody
calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-07-06 21:53:00 +02:00
Stefano Babic
040f8f63e9 xscale: add support for the polaris board
The Polaris board is based on the TrizepsIV module of
Keith & Koep (http://www.keith-koep.com).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2009-07-06 21:52:58 +02:00
Daniel Gorsulowski
33b1d3f43a at91: Add esd gmbh MEESC board support
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-07-06 21:52:50 +02:00
Magnus Lilja
8449f287f5 MX31: Add basic support for Freescale i.MX31 PDK board.
Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).

This patch assumes that some other program performs the actual
NAND boot.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Acked-by: Fabio Estevam <fabioestevam@yahoo.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:38 +02:00
Jean-Christophe PLAGNIOL-VILLARD
c8badbe500 dm355/pm9261: add missing CONFIG_NET_MULTI
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:33 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2600b8571a versatile: config coding style cleanup
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Peter Pearse <peter.pearse@arm.com>
2009-07-06 21:52:19 +02:00
Peter Tyser
5da6f806b4 86xx: XPedite5170 board support
Initial support for Extreme Engineering Solutions XPedite5170 -
a MPC8640-based 3U VPX single board computer with a PMC/XMC
site.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:25:48 -05:00
Peter Tyser
017f11f68e 8xxx: Break out DMA code to a common file
DMA support is now enabled via the CONFIG_FSL_DMA define instead of the
previous CONFIG_DDR_ECC

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:01:51 -05:00
Roy Zang
29c3518246 85xx: Add pci e1000 Ethernet support for P2020 board
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-30 08:26:34 -05:00
Kumar Gala
156984a361 8xxx: Fix PCI bus address setup for 36-bit configs
We want the outbound PCI memory map to end at the 4G boundary so we
can maximize the amount of space available for inbound mappings if
we have large amounts of memory.

This matches the device tree setup in the kernel for the 36-bit physical
configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-30 08:24:22 -05:00
Jean-Christophe PLAGNIOL-VILLARD
46937b2742 integratorap/cp: use cfi driver
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Peter Pearse <peter.pearse@arm.com>
2009-06-23 00:10:04 +02:00
Ilya Yanok
47d19da4d3 serial_mx31: allow it to work with mx27 too and rename to serial_mxc
UART hardware on i.MX27 is the same as on the i.MX31 so we just
need to provide the driver with correct address of the registers.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-06-21 16:18:13 +02:00
Jean-Christophe PLAGNIOL-VILLARD
1b3b7c640d at91sam9263ek: add nor flash support
this will allow you to store use it for the env and to boot directly U-Boot from

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Ilko Iliev
3294923297 at91: add support for the PM9261 board of Ronetix GmbH
The PM9261 board is based on the AT91SAM9261-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9261.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Jean-Christophe PLAGNIOL-VILLARD
01550a2b65 pm9263: use macro instead of hardcode value for the lowlevel_init
optimize a few the RAM init

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Jean-Christophe PLAGNIOL-VILLARD
7a11c7f974 pm9263: lowlevel init update
move PSRAM init to pm9263.c
this will allow us after to make the nor lowlevel_init generic

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Mike Frysinger
afac8b0717 Blackfin: fix SPI flash speed define name
The SPI flash define is named CONFIG_SF_DEFAULT_SPEED, not
CONFIG_SF_DEFAULT_HZ, so fix the typos in the Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:21 -04:00
Mike Frysinger
fea63e2a44 Blackfin: bf548-ezkit: bump up monitor size
The latest version of U-Boot got a bit fatter in the BSS section which
caused overflows in the RAM region, so increase the monitor size.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:18 -04:00
Vivi Li
bc43a8d899 Blackfin: bf533-stamp/bf537-stamp: fix env settings for SPI flash
The SPI flash layer is much stricter about sector usage than the eeprom
layer we used to use, so update the env settings to better match the
sector alignment of the flashes we use.

Signed-off-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:16 -04:00
Wolfgang Denk
c9005a72fe Merge branch 'master' of git://git.denx.de/u-boot-net 2009-06-15 11:15:54 +02:00
Remy Bohmer
60f61e6d76 Convert DM9000 driver for CONFIG_NET_MULTI
All drivers need to be converted to CONFIG_NET_MULTI.
This patch converts the dm9000 driver.

Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:55 -07:00
Ben Warren
8453587ef9 Switched davinci_emac Ethernet driver to use newer API
Added CONFIG_NET_MULTI to all Davinci boards
Removed all calls to Davinci network driver from board code
Added cpu_eth_init() to cpu/arm926ejs/cpu.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
Mike Frysinger
9ff67e5e4c Blackfin: unify u-boot linker scripts
All the Blackfin linker scripts were duplicated across the board dirs with
no difference save from the semi-often used ENV_IS_EMBEDDED option.  So
unify all of them in the lib_blackfin/ dir and for the few boards that
need to embedded the environment directly, add a LDS_BOARD_TEXT define for
them to customize via their board config file.  This is much simpler than
forcing them to duplicate the rest of the linker script.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:14 -04:00
Mike Frysinger
f52efcae98 Blackfin: bf518f-ezbrd: enable SST SPI flash driver
The BF51xF parts have an internal SST SPI flash, so make sure the driver is
enabled by default so we can access it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:13 -04:00
Mike Frysinger
f348ab85f7 Blackfin: convert specific pre/post config headers to common method
The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
common Blackfin board defines.  The common method now is to use config.h,
so convert blackfin-config-post.h to that.  Rename the still Blackfin
specific blackfin-config-pre.h to config-pre.h so the naming conventions
at least line up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:13 -04:00
Mike Frysinger
7c7503ee6c Blackfin: enable LZMA for all ADI boards
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:12 -04:00
Mike Frysinger
0e63dc0679 Blackfin: make default ADI env more flexible
Allow boards to easily override the root= and default bootcmd, allow
people to tweak the file used in default bootcmds at runtime via one env
var, and add a stock nandboot command.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:12 -04:00
Hoan Hoang
0f52b560f1 Blackfin: ibf-dsp561: new board port
Signed-off-by: Hoan Hoang <hnhoan@i-syst.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:11 -04:00
Mike Frysinger
3088189a15 Blackfin: blackstamp: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:11 -04:00
Mike Frysinger
59ac972970 Blackfin: bf537-srv1: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:10 -04:00
Mike Frysinger
d7fdc1410b Blackfin: bf537-minotaur: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:09 -04:00
Mike Frysinger
cb4b5e874f Blackfin: bf537-pnav: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:08 -04:00
Mike Frysinger
59e4be945b Blackfin: cm-bf527: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:07 -04:00
Mike Frysinger
8b219cf07c Blackfin: cm-bf548: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:07 -04:00
Mike Frysinger
9417d9a213 Blackfin: tcm-bf537: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:06 -04:00
Mike Frysinger
e548321af0 Blackfin: cm-bf561: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:06 -04:00
Mike Frysinger
8a9bab08a6 Blackfin: cm-bf537e: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:05 -04:00
Mike Frysinger
e82d8a1f02 Blackfin: cm-bf533: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:04 -04:00
Mike Frysinger
dd14af7640 Blackfin: new spibootldr command
Newer Blackfin parts can an on-chip ROM that can boot LDRs over SPI flashes,
so add a new 'spibootldr' command to take advantage of it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:04 -04:00
Grzegorz Bernacki
1260233982 digsy mtc: Add description to GPIO initial configuration.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-06-14 23:06:03 +02:00
Grzegorz Bernacki
f1f66edfc7 digsy MTC: Add SPI support.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-06-14 23:03:57 +02:00
Haiying Wang
3bd8e532b5 85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS
On MPC8569MDS board, UCC6 and UCC8 can be configured to work at SGMII mode via
UEM on PB board. Since MPC8569 supports up to 4 Gigabit Ethernet ports, we
disable UEC6 and UEC8 by default.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:02 -05:00
Haiying Wang
f82107f637 85xx: Add RMII support for MPC8569MDS
This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to
support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to
enalbe_mpc8569mds_qe_uec which is  more accurate.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:01 -05:00
Haiying Wang
750098d33b 85xx: Add UEC3 and UEC4 support for MPC8569MDS
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:00 -05:00
Srikanth Srinivasan
feb7838f97 85xx: Add P2020DS support
The patch adds support for P2020DS reference platform.
DDR3 interface uses hard-coded initialization rather than SPD
for now and was tested at 667Mhz. Some PIXIS register
definitions and associated code sections need to be fixed.
TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all
tested under u-boot.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:16:25 -05:00
Stefan Roese
229549a56d mpc512x: MPC5121ADS: Add NAND support
This patch adds NAND support to the MPC5121ADS board. Please
note that the image size increased since NAND support didn't
fit in the current image size (256k).

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:19 +02:00
Stefan Roese
e53b507cee mpc512x: Add esd gmbh mecp5123 board support
MECP5123 is a MPC5121E based module by esd gmbh.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-06-12 20:47:19 +02:00
Stefan Roese
58f10460b0 74xx_7xx: CPCI750: Add CPCI adapter/target support
The CPCI750 can be built as CPCI host or adapter/target board. This patch
adds support for runtime detection of those variants.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-06-12 20:47:18 +02:00
Stefan Roese
0a14d6b8f4 74xx_7xx: CPCI750: Add commandline editing/history
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-06-12 20:47:18 +02:00
Vivek Mahajan
4bc6eb79be mpc85xx: 8536ds: Add USB related CONFIGs
This patch adds CONFIGs for enabling USB in mpc8536ds and also
adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its
Copyright.

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-06-12 20:47:18 +02:00
Vivek Mahajan
6823e9b012 mpc83xx: 8315erdb: Add USB related CONFIGs
This patch adds CONFIGs for enabling USB in mpc8315erdb and also
adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its
Copyright.

Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-06-12 20:47:18 +02:00
Peter Tyser
2c7920afaf 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
Use the standard lowercase "x" capitalization that other Freescale
architectures use for CPU defines to prevent confusion and errors

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:47:17 +02:00
Peter Tyser
0f89860494 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
Use the standard lowercase "xx" capitalization that other Freescale
architectures use for CPU defines to prevent confusion and errors

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:47:17 +02:00
Wolfgang Denk
52568c3654 MPC512x: add support for ARIA board
ARIA is a MPC5121E based COM Express module by Dave/DENX.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Wolfgang Denk
3b74e7ec58 MPC512x: remove include/mpc512x.h
Move needed definitions (register descriptions etc.) from
include/mpc512x.h  into  include/asm-ppc/immap_512x.h.

Instead of using a #define'd register offset, use a function that
provides the PATA controller's base address.

All the rest of include/mpc512x.h are register offset definitions
which can be eliminated by proper use of C structures.

There are only a few register offsets remaining that are needed in
cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
which is intended as a temporary workaround only. In a later patch
this file will be removed, too, and then auto-generated from the
respective C structs.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Wolfgang Denk
72601d04fd Rename ads5121 board into mpc5121ads
We rename the board so we use a consistent name in U-Boot and in
Linux.  Also, we use this opportunity to move the board into the
Freecale vendor directory.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Mike Frysinger
ecb1dc8922 Add support for Linux-like kallsysms
The kernel stores address<->symbol names in it so things can be decoded at
runtime.  Do it in U-Boot, and we get nice symbol decoding when crashing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 20:45:48 +02:00
Stefan Roese
942556a92a mtd: MTD related config header changes (mtdparts command)
By changing the cmd_mtdparts to only use the MTD infrastructure and
not the direct interface to the CFI NOR FLASH driver we now need
to add the MTD infrastructure to all boards using those mtdparts
commands. This patch adds those components:

CONFIG_MTD_DEVICE (for all FLASH types)

plus

CONFIG_FLASH_CFI_MTD (for NOR FLASH)

To all board maintainers: Please test this on your platforms and
report any problems/issues found. Thanks.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ron Madrid <info@sheldoninst.com>
Cc: Georg Schardt <schardt@team-ctech.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Martin Krause <martin.krause@tqs.de>
Cc: Gary Jennejohn <garyj@denx.de>
Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>
2009-06-12 20:45:47 +02:00
Tom Rix
0c9520efd6 ZOOM2 Define GPIO banks used.
Enable the function and interface clocks for banks 2,3,5 and 6.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>
2009-06-12 20:45:47 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b2403589b4 at91: move cpu info print to cpu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:45:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b32e189079 at91: move cpu name define to arm/arch/ cpu header
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:53 +02:00
Dirk Behme
3962c4f9fc OMAP3: Zoom2: Enable Board and CPU info
With other OMAP3 boards we recently switched to CPU and Board
info API. From parallel merge, this is missing for Zoom2.
Enable it for Zoom2, too.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Acked-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:53 +02:00
Tom Rix
83ae698ff2 ZOOM2 Add led support.
This patch controls the large LED on the top left of the zoom2.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:53 +02:00
Tom Rix
660888b7fb ZOOM2 Add serial support.
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board.
The default serial is from the USB connector on left side of the debug board.
The USB connector will produce 2 of the 4 UARTS.  On your host pick the first
enumeration.

The details of the setting of the serial gpmc setup are not available.
The values were provided by another party.

The serial port set up is the same with Zoom1.
Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.

The kernel bootargs are
console=ttyS3,115200n8

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:53 +02:00
Jean-Christophe PLAGNIOL-VILLARD
3ea201b016 lh7a40x: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:53 +02:00
Jean-Christophe PLAGNIOL-VILLARD
379be585eb pxa: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ad7e8aac69 arm: remove cpu_init
move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:52 +02:00
Wolfgang Denk
a3455c0051 TQM834x: use buffered writes to accelerate writing to flash
Also enable display of 'E'mpty sectors in "flinfo" output.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:39:52 +02:00
Wolfgang Denk
4681e673a5 TQM834x: add FDT support
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:39:52 +02:00
Wolfgang Denk
929b79a0b5 TQM834x: fix environment size; add redundant env.
Also reserve more space for U-Boot as it will probably grow soon.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:39:52 +02:00
David Brownell
28b00324be dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM.  This is a board
from Spectrum Digital.  Board docs include schematic and firmware
for its microcontroller:

  http://c6000.spectrumdigital.com/evmdm355/revd/

Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:

  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html

This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART).  In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:51 +02:00
Sanjeev Premi
136cf92dc9 OMAP3EVM: Set default bootfile
The current configuration doesn't define default
bootfile; leading to this warning at execution:

OMAP3_EVM # dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img'
TFTP from server 0.0.0.0; our IP address is 192.168.1.11;
sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-06-12 20:39:51 +02:00
Tom Rix
376aee78dd ZOOM2 Add initial support for Zoom2
Zoom2 is a new board from Texas Instruments and LogicPD

The logicpd web site is a good source for general information on this board.
Please start looking here if the below links are broken.
http://www.logicpd.com

This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is the product description web page
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp

This patch provides a zoom2 base target by copying zoom1 and by making some
obvious changes.

To configure, run
make omap3_zoom2_config

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:50 +02:00
David Brownell
269dfea017 davinci dm6446evm NAND update
This updates the optional (non-default!) NAND support for the
DaVinci DM6446 EVM:

 - include MTD partitioning, defaulting to what Linux uses

 - use a flash-based BBT, which among other things speeds bootup

This matches code that's now queued for mainline Linux, and might
even merge in an upcoming 2.6.30-rc; and the MTIDS are set up so
that the U-Boot $mtdparts environment variable can be passed as-is
on the kernel command line as a cmdlinepart override.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:49 +02:00
David Brownell
7a4f511b59 davinci: display correct clock info
Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).

Switch boards to use the cpuinfo() hook for this stuff.

Remove a few now-obsolete PLL #defines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:49 +02:00
Tom Rix
daea928829 ZOOM1 Remove more legacy NAND defines.
These legacy NAND defines are no longer needed by this target.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b54384e3ba arm: timer and interrupt init rework
actually the timer init use the interrupt_init as init callback
which make the interrupt and timer implementation difficult to follow

so now rename it as int timer_init(void) and use interrupt_init for interrupt

btw also remane the corresponding file to the functionnality implemented

as ixp arch implement two timer - one based on interrupt - so all the timer
related code is moved to timer.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
8fc3bb4b06 arm: cleanup remaining CONFIG_INIT_CRITICAL
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
David Brownell
f79043681f davinci: split out some dm644x-specific bits from psc
Split out DaVinci DM6446-specific bits from more generic bits:

 - Add a CONFIG_SOC_DM644X.  All current boards use DM6446 chips;
   DM6443 and DM6441 chips differ in available peripherals.

 - Move most DM644X-specific bits from psc.c to a new dm644x.c file,
   which is conditionally built.  It provides device-specific setup.

Plus minor coding style and comment updates with respect to the PSC.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:48 +02:00
Stefan Roese
d873133f2b ppc4xx: Add Sequoia RAM-booting target
This patch adds another build target for the AMCC Sequoia PPC440EPx
eval board. This RAM-booting version is targeted for boards without
NOR FLASH (NAND booting) which need a possibility to initially
program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
configured to setup the SDRAM, this debugger can load this RAM-
booting image to the target address in SDRAM (in this case 0x1000000)
and start it there. Then U-Boot's standard NAND commands can be
used to program the NAND FLASH (e.g. "nand write ...").

Here the commands to load and start this image from the BDI2000:

440EPX>reset halt
440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
440EPX>go 0x1000000

Please note that this image automatically scans for an already
initialized SDRAM TLB (detected by EPN=0). This TLB will not be
cleared. This TLB doesn't need to be TLB #0, this RAM-booting
version will detect it and preserve it. So booting via BDI2000
will work and booting with a complete different TLB init via
U-Boot works as well.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Ben Warren
18cc7afd9a Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
All in-tree PPC4xx boards now use CONFIG_NET_MULTI

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Matthias Fuchs
de47a34d4d 4xx: Remove binary cpld bitstream from DP405 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on DP405 boards.

Because u-boot with an external cpld bitstream may not
take more space in flash than before the u-boot binary is
shrinked a little bit. Some unused featues have been
removed therefore.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Matthias Fuchs
700d553fd3 4xx: Remove binary cpld bitstream from VOM405 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on VOM405 boards.

Because u-boot with an external cpld bitstream may not
take more space in flash than before the u-boot binary is
shrinked a little bit.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Matthias Fuchs
0bb1063036 4xx: Remove binary cpld bitstream from PMC405 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on PMC405 boards.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Matthias Fuchs
7cc635fb35 4xx: Remove binary cpld bitstream from CMS700 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on CMS700 boards.

Because u-boot with an external cpld bitstream may not
take more space in flash than before the u-boot binary is
shrinked a little bit. Some unused featues have been
removed therefore.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Peter Tyser
0f89c54be9 i2c: Update references to individual i2c commands
The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop,
and isdram are no longer available so all references to them have been
updated to the new form of "i2c <cmd>".

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:46 +02:00
Peter Tyser
d48eb5131d i2c: Remove deprecated individual i2c commands
The following individual I2C commands have been removed: imd, imm, inm,
imw, icrc32, iprobe, iloop, isdram.

The functionality of the individual commands is still available via
the 'i2c' command.

This change only has an impact on those boards which did not have
CONFIG_I2C_CMD_TREE defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:46 +02:00
Peter Tyser
8d907e79bc mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
Add standard CONFIG_SYS_I2C_SPEED define for the mpc7448hpc2 so that
it can use the common 'i2c speed' command.  Note that the I2C controller
utilized by the mpc7448hpc2 has a fixed speed and cannot be changed
dynamically.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:45 +02:00
Haiying Wang
399b53cbab 85xx: Add PIB support at CS4/CS5 for MPC8569MDS
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Yu Liu <Yu.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 00:11:00 -05:00
Haiying Wang
fb27949059 85xx: Fix some settings for MPC8569MDS board
- Increase the size of malloc to 512KB because MPC8569MDS needs more memory for
malloc to support up to eight Ethernet interfaces.
- Move Environment address out of uboot thus the saved environment variables
will not be erased after u-boot is re-programmed.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 00:10:04 -05:00
Wolfgang Denk
c3ab4243b5 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-06-11 23:53:15 +02:00
Wolfgang Denk
3a76ab5c16 rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-10 00:15:11 +02:00
Wolfgang Denk
7a2063bd80 TQM85xx: minor config file cleanup
Remove "saveenv" from "update" definition: the environment is outside
the U-Boot image on TQM85xx and therefor not affected by updates.

Also "beautify" code a bit (vertical alignment).

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-09 23:05:44 +02:00
Wolfgang Denk
c0296b1801 TQM85xx: adapt for new flash types
Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM
series while new boards have 'N' type Flashes from the S29GLxxxN
series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.

We now change the configuration to the new flash types for all
boards; this also works on old boards - we just waste two flash
sectors for the environment which could be smaller there.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-09 23:04:42 +02:00
Dave Liu
6735104924 85xx: Fix the wrong SYS_CLK_IN for 8569MDS
The SYS_CLK_IN of MPC8569MDS is 66.66MHz,
The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor.
so, change the SYS_CLK_IN from 66MHz to 66.66MHz.

Signed-off-by: Dave Liu <daveliu@freescale.com>
2009-06-09 22:58:39 +02:00
Remy Bohmer
e5a3bc2401 Add config option for disabling DM9000-SROM support.
Some boards do not have SROM support for the DM9000 network adapter.
Instead of listing these board names in the driver code, make this
option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the
same routines

Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-08 22:57:21 -07:00
Kim Phillips
3c9b1ee17e mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation
In GMII mode (which operates at 3.3V) both SICRH TSEC1/2 output buffer
impedance bits should be clear, i.e., SICRH[TSIOB1] = 0 and SICRH[TSIOB2] = 0.
SICRH[TSIOB1] was erroneously being set high.

U-Boot always operated this PHY interface in GMII mode.  It is assumed this
was missed in the clean up by the original board porters, and copied along
to the TQM and sbc boards.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Ira Snyder <iws@ovro.caltech.edu>
Reviewed-by: David Hawkins <dwh@ovro.caltech.edu>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Dave Liu <DaveLiu@freescale.com>
2009-06-08 10:45:09 -05:00
Graf Yang
ab68790798 Blackfin: bf518f-ezbrd: setup portmux for async flash
The pins for async memory where parallel flash lives are not enabled by
default, so make sure we mux them as needed.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-25 22:38:42 -04:00
Kim Phillips
9fd9abedcc TQM834x: remove defines causing gcc4.4 warnings
Configuring for TQM834x board...
cpu_init.c: In function 'cpu_init_f':
cpu_init.c:262: warning: array subscript is above array bounds
cpu_init.c:263: warning: array subscript is above array bounds
cpu_init.c:270: warning: array subscript is above array bounds
...

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-05-20 22:36:26 +02:00
Detlev Zundel
792a09eb9d Fix e-mail address of Gary Jennejohn.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 22:11:59 +02:00
Rohit Hagargundgi
12a6753155 Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
and is used by OneNAND ipl when reading U-Boot image.

Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2009-05-15 21:43:05 +02:00
Detlev Zundel
60bbcf0cc6 powerpc/inka4x0: Remove left-over ide reset code.
The pin which was used in preliminary versions of the board for ide
reset is really connected to the rtc clock.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-05-15 21:31:24 +02:00
Mike Frysinger
53310b88ea Blackfin: bf527-ezkit: fix SPI flash env params
The BF527-EZKIT settings for storing the environment in SPI flash wasn't
using the correct sector settings for the SPI flash part that is actually
on the board.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-06 08:47:31 -04:00
Manikandan Pillai
d3a513c23b OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
2009-04-30 23:56:01 +02:00
Wolfgang Denk
ccb71dfac9 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-04-30 23:01:08 +02:00
Ladislav Michl
3791a1187c arm925t: Fix CONFIG_SYS_HZ to 1000
Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
get_timer.

Changes since original version:
* Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
  improve timer resolution.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2009-04-29 21:39:46 +02:00
Dirk Behme
42bf4b2248 OMAP3: Remove legacy NAND defines
Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-04-29 21:17:43 +02:00
Sanjeev Premi
6a6b62e3aa OMAP3: Use functions print_cpuinfo() and checkboard()
Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
 - CONFIG_DISPLAY_CPUINFO
 - CONFIG_DISPLAY_BOARDINFO

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-04-29 21:11:32 +02:00
Heiko Schocher
28afe0160f ids8247: Remove legacy NAND defines
because legacy NAND support is deprecated converting to current
NAND interface. !This just compile, because I have no more the
hardware to test it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-04-28 01:22:59 +02:00
Detlev Zundel
294f10ca9e mips/vcth: Use generic 16550 uart driver
As the common code also handles baudrate switching, which the board
specific vct.c driver did not support, this is one of the rare
occassions where deleting code actually adds a feature :)

Signed-off-by: Detlev Zundel <dzu@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2009-04-28 01:10:24 +02:00
Peter Tyser
c93c102ace AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-28 01:02:35 +02:00
Wolfgang Denk
9c48a8ea38 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-04-27 23:41:01 +02:00
Dirk Behme
a85693b3bd OMAP3: Fix changed mmc init command
In recent U-Boot mmcinit changed to mmc init.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-04-26 23:13:40 +02:00
David Brownell
7239c5da5e minor DaVinci clock cleanup
Minor cleanup to clock-related defines for DaVinci DM6446 boards:

 - CONFIG_SYS_CLK_FREQ is unused; remove it.

 - CONFIG_SYS_NS16550_CLK must be the same as CONFIG_SYS_HZ_CLOCK

On DM6446 both of those peripheral clocks actually come from the
same source, the primary oscillator.  Having them use the same
symbol avoids bugs in the clone'n'modify development cycle.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-04-24 22:54:19 +02:00
Wolfgang Denk
faa5a0c6fc Merge branch 'master' of git://git.denx.de/u-boot-at91 2009-04-24 13:31:02 +02:00
Anatolij Gustschin
8e15088794 mpc83xx: MPC8360ERDK: fix environment offset configuration bug
The size of U-Boot binary for MPC8360ERDK increased
(> 2 flash sectors now), so 'saveenv' will partially
overwrite U-Boot in flash and will brick the board.
This patch moves environment offset to fourth flash
sector and also fixes CONFIG_SYS_MONITOR_LEN.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-04-23 17:53:33 -05:00
David Brownell
7ee38c044c fix DaVinci NS16550_REG_SIZE regression
Update the DaVinci DM6446 boards to use the new convention
for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed
from the original 4 bytes, but these chips are little-endian.

(Resolves a regression added recently by the include/ns16550.h
patch to "Unify structure declaration for registers".  The code
previously worked just fine because the registers were accessed
as host-endian words, not as bytes.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-04-16 23:04:28 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6ebff365eb at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
The timer has been rewrote with a precision at ~0,18%

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Sergey Lapin <slapin@ossfans.org>
Tested-by: Eric BENARD <ebenard@free.fr>
2009-04-16 21:30:48 +02:00
Ilko Iliev
f0a2c7b4b6 at91: add support for the PM9263 board of Ronetix GmbH
The PM9263 board is based on the AT91SAM9263-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9263.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 21:30:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
dc39ae9513 at91sam9/at91cap: improve clock framework
calculate dynamically the clock rate and pllb setting for usb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 21:30:44 +02:00
Stefan Roese
dd7c302099 ppc4xx: Disable POST memory test on NAND-booting Kilauea
Don't run the memory POST on the NAND-booting version. It will
overwrite part of the U-Boot image which is already loaded from NAND
to SDRAM. We were just lucky that it booted at all with this SDRAM
test enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-16 09:12:08 +02:00
Stefan Roese
9a929170be ppc4xx: Disable POST memory test on NAND-booting Sequoia
Don't run the memory POST on the NAND-booting version. It will
overwrite part of the U-Boot image which is already loaded from NAND
to SDRAM. We were just lucky that it booted at all with this SDRAM
test enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-04-16 09:12:08 +02:00
Wolfgang Denk
712ac6a1a6 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-04-05 23:04:30 +02:00
Jean-Christophe PLAGNIOL-VILLARD
c6fadb9c73 integratorap: fix PCI support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-05 12:53:34 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b3acb6cd40 arm: clean cache management
unify arm cache management except for non standard cache as ARM7TDMI

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-05 13:06:31 +02:00
Tom Rix
767f3acd9f ZOOM1 Remove legacy NAND defines
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-04-05 00:30:38 +02:00
Wolfgang Denk
c0a14aedc3 Update CHANGELOG, coding style cleanup. 2009-04-05 00:27:57 +02:00
Scott Wood
c73ed274a2 MPC8260ADS: Add nfsboot/ramboot to default environment.
This brings it in line with other Freescale boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-04 23:29:40 +02:00
Jean-Christophe PLAGNIOL-VILLARD
03bab00919 at91sam9263ek: enable hush and auto complete support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Stelian Pop <stelian@popies.net>
2009-04-04 21:08:47 +02:00
Jean-Christophe PLAGNIOL-VILLARD
4758ebdd53 at91: move dataflash spi driver to drivers/spi
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:22 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2b7178afce at91: move usb driver to drivers/usb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:21 +02:00
Jean-Christophe PLAGNIOL-VILLARD
beebd851cd at91rm9200: move serial driver to drivers/serial
add CONFIG_AT91RM9200_USART to activate the driver

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Ulf Samuelsson
cb82a53266 Add support for the AT91RM9200EK Board.
The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507

with
	- NOR (cfi driver)
	- DataFlash
	- USB OHCI
	- Net
	- I2C (hard)

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Scott Wood
42f9ebff2f MPC8260ADS: Define CONFIG_HAS_ETH0.
This is required so that the MAC address will be updated in the device tree.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-04 20:00:10 +02:00
Scott Wood
8701eceffd PQ2FADS: Enable PCI.
PCI on PQ2FADS is very similar to PCI on MPC8272ADS.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-04-04 20:00:06 +02:00
Wolfgang Denk
0d8cb9c04f Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-04-03 22:38:36 +02:00
Wolfgang Denk
74de7aefd7 Add "source" command; prepare removal of "autoscr" command
According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.

This patch prepares this change and starts a 6 month transition
period as follows:

- The new "source" command has been added, which implements exactly
  the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
  new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
  have *not* been adapted yet; these will be renamed resp. removed in
  a separate patch when the support for the "autoscr" command get's
  finally dropped.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-04-03 22:01:42 +02:00
Mike Frysinger
84a9dda324 Blackfin: bf518f-ezbrd: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:46 -04:00
Mike Frysinger
0c31ddf7b7 Blackfin: bf526-ezbrd: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:42 -04:00
Mike Frysinger
5c45f7cac2 Blackfin: bf538f-ezkit: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:38 -04:00
Mike Frysinger
d9a5d113b9 Blackfin: bf527-ezkit: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:35 -04:00