Commit graph

24134 commits

Author SHA1 Message Date
Tim Harvey
c574736915 configs: imx8m{m,n}_venice_defconfig: add usb support
Enable USB support for host controller and various USB ethernet
devices.

Example usage of USB Mass Storage (UMS) support:
 u-boot=> mmc list
 FSL_SDHC: 0
 FSL_SDHC: 1
 FSL_SDHC: 2 (eMMC)
 u-boot=> ums 0 mmc 2
 UMS: LUN 0, dev mmc 2, hwpart 0, sector 0x0, count 0xe30000

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-21 12:44:23 +02:00
Tim Harvey
fd5c7173ad imx8m{m,n}_venice: update env memory layout
Update distro config env memory layout:
 - loadaddr=0x48200000 allows for 130MB area for uncompressing (ie FIT
   images, kernel_comp_addr_r)
 - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel
 - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt
 - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21 12:44:23 +02:00
Marcel Ziswiler
3f7d518acc configs: tdx: apalis/colibri_imx6: use preboot as well
Use PREBOOT as well. This allows a customer to just set fdt_board as
on any other module to customize the device tree for his carrier
board.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Marcel Ziswiler
405c97fd1d configs: tdx: apalis_imx6: drop hw v1.0 support
Drop optional support for the ancient Apalis iMX6 V1.0 hardware which
had the UART wired as DCE rather than DTE.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Igor Opaniuk
1410cba567 toradex: drop legacy nfsboot script
Drop legacy nfsboot script in favor of distroboot DHCP boot.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Igor Opaniuk
1377a776c3 toradex: set default dhcp distroboot scriptname
Use the same name of DHCP Distroboot script as in regular eMMC case.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Denys Drozdov
47bcc0d056 toradex: apalis-imx8x: drop support for apalis imx8x
Drop Apalis iMX8X platform as it never left sample state and is no
longer supported.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-21 12:44:23 +02:00
Marek Vasut
2e760f180d imx: power-domain: Add i.MX8MP support
Add i.MX8MP power domain handling into the driver. This is based on the
Linux GPCv2 driver state which is soon to be in Linux next.

Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice-gw74xx
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-21 12:44:23 +02:00
Marek Vasut
63c390a1ea power_domain: Add power_domain_get_by_name()
Implement power_domain_get_by_name() convenience function which parses
DT property 'power-domain-names' and looks up power domain by matching
name.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Simon Glass <sjg@chromium.org>
2022-04-21 12:44:23 +02:00
Sean Anderson
9dc775aabb IOMUX: Fix access past end of console_devices
We should only access console_devices[file][i] once we have checked that i
< cd_count[file]. Otherwise, we will access uninitialized memory at the end
of the loop. console_devices[file][i] should not be NULL, but putting the
assignment in the loop condition allows us to ensure that i is checked
beforehand. This isn't a bug, but it does make valgrind stop complaining.

Fixes: 400797cad3 ("IOMUX: Split out for_each_console_dev() helper macro")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Scull <ascull@google.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-04-19 14:52:34 -04:00
Tom Rini
24c904f309 Convert CONFIG_SYS_MEM_TOP_HIDE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MEM_TOP_HIDE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-19 14:52:34 -04:00
Tom Rini
9acf3726b6 Merge tag 'u-boot-rockchip-20220418' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add rk3066 SoC support;
- Add rk3066 MK808 board support;
- dts sync from kernel for rk322x, rk3288;
- some other board level config update;
2022-04-19 08:50:40 -04:00
Simon Glass
cdd73e7215 dm: core: Deal with a wrinkle with linker lists
When every member of a linker list is aligned by the compiler, we can no
longer rely on the sizeof of the struct to determine the number of
entries.

For example, if the struct size is 0x90 but every entry is aligned to 0xa0
by the compiler, the linker list entries takes more space in memory and
the calculation of the number of entries is incorrect. For example, we may
see 0x12 entries when there are only 0x11.

This is a real problem. There may be a general solution, although I cannot
currently think of one. So far it only bites with OF_PLATDATA_RT which
creates a pointer to each entry of the 'struct udevice' linker_list. This
does not happen without that option, so it only affects SPL.

Work around it by manually calculating the aligned size of struct udevice,
then using that for the n_ent calculation.

Note: the alignment fix to linker list was here:

   0b2fa98aa5 linker_lists: Fix alignment issue

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-18 17:53:56 -04:00
Simon Glass
092d5c2a83 dm: core: Allow devres to be disabled in SPL
At present if devres is enabled in U-Boot proper it is enabled in SPL.
We don't normally want it there, so disable it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Angus Ainslie <angus@akkea.ca>
2022-04-18 17:53:56 -04:00
Johan Jonker
334d519a13 rockchip: rk3288-cru: sync the clock dt-binding header from Linux
In order to update the DT for rk3288
sync the clock dt-binding header.
This is the state as of v5.17 in Linux.
Keep SCLK_MAC_PLL in use for rk3288 clock driver.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
444311196e rockchip: rk3288-power: sync power domain dt-binding header from Linux
In order to update the DT for rk3288
sync the power domain dt-binding header.
This is the state as of v5.17 in Linux.
Change location to be more in line with other SoCs.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
6914ef8e67 rockchip: rk3228-cru: sync the clock dt-binding header from Linux
In order to update the DT for rk3228
sync the clock dt-binding header.
This is the state as of v5.17 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
3c48a62460 rockchip: rk3228-power: sync power domain dt-binding header from Linux
In order to update the DT for rk3228
sync the power domain dt-binding header.
This is the state as of v5.17 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
33f4750783 rockchip: rk3066: add core support
Add the core architecture code for the rk3066.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
5e6ee6bde5 rockchip: rk3066-power: sync power domain dt-binding header from Linux
In order to update the DT for rk3066
sync the power domain dt-binding header.
This is the state as of v5.12 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:13 +08:00
Johan Jonker
54562045e5 rockchip: move ROCKCHIP_STIMER_BASE to Kconfig
Move ROCKCHIP_STIMER_BASE to Kconfig.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:12 +08:00
Vagrant Cascadian
48cd7a1f6c rockchip: Enable SCSI in distro bootcmd for rk3399.
Include SCSI in the list of boot targets if CONFIG_CMD_SCSI is
enabled.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-04-18 11:25:12 +08:00
Tom Rini
9859465bfe Pull request for efi-2022-07-rc1-2
Documentation:
 
 * Describe env command
 
 UEFI
 
 * simplify Unicode string functions
 * clean up the usage of GUIDs for capsule updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmJZTvsACgkQxIHbvCwF
 GsTbOg//XtOKXKHsWIq0cDgxxUTM2iSWCwzw2rSO3VPbzjeRekBCH3+I6D6hCHmp
 ikSPB8LBRRMEkBPq18LdXY9oaV6keRGgLNtiLATKLMHsJ9USkCqNzdSegCIWFl0T
 2N5Rm/qdh90csGyIzEk+qPOLBNP/St/aTO6n7b9+FgZ6Hy2dwXTjnNzPFEnz3hCY
 KjlOxIWsgofb9Iem4f+mMhgiBjM161yqWMd2ND/EDn3RRjrAh/ZWRcD/nWirZxeO
 uwn+8bMjDfO83yICS1txp6mbvtFHhrktSo6hc7Ga5m+5kmlPBcgKnKEIUgrKuNd/
 Jyr12MLBtI7oyETr+CY9vPQTciWBU17cW2TO7CIBDQt3QtfvVBrWaGe4barPLPzx
 hvyKzrflRDTFUKoG+f/XGN2YSvYw+QXVXZjBqYDwOepT7oq6lWpf7gtxNQNG5RZI
 uOwk95VT/cVh7S8qp1ioD+tGtvA9PeMyuh8mryD2kYrJh4bbGimfyP2Z6e/aIRNi
 RnczTAFDXoA4g32DP8/3Im43rSIv685e4N0YnDF+ZyKALxyflZAPXT0MY8FLfGyE
 x6Zb1t45W8thIDhBLNjurBge4NTFuCq0NM8mszOHMFBgO7PDIMEX+9uZOvhrhYbs
 a7XYFIEIcZZiLqkNjwr7B+D7Ya6q7gYvcqAo6rgtbDNs5QpH/0A=
 =UQMn
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-07-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-07-rc1-2

Documentation:

* Describe env command

UEFI

* simplify Unicode string functions
* clean up the usage of GUIDs for capsule updates
2022-04-15 14:29:52 -04:00
Tom Rini
7f418ea598 Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net
- DM9000 DM support
- tftp server bug fix
- mdio ofnode support functions
- Various phy fixes and improvements.

[trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c
drivers/net/phy/phy.c include/phy.h]
2022-04-15 08:10:32 -04:00
Heinrich Schuchardt
0121282d1a lib: convert u16_strlen() into a macro
The function u16_strlen() can be implemented as call to u16_strnlen().

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-04-15 11:26:20 +02:00
Sughosh Ganu
9736287173 FMP: Remove GUIDs for FIT and raw images
The capsule update code has been modified for getting the image GUID
values from the platform code. With this, each image now has a unique
GUID value. With this change, there is no longer a need for defining
GUIDs for FIT and raw images. Remove these GUID values.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-15 10:43:18 +02:00
Sughosh Ganu
741ef86728 capsule: board: Add information needed for capsule updates
Add a structure which defines the information that is needed for
executing capsule updates on a platform. Some information in the
structure like the dfu string is used for making the update process
more robust while some information like the per platform image GUIDs
is used for fixing issues. Initialise this structure in the board
file, and use the information for the capsule updates.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2022-04-15 10:43:18 +02:00
Tom Rini
2df59b2bd4 Remove duplication of table_compute_checksum function
It seems like there was some merge error when first cleaning up and
sharing this function.  We have both an inline version of the function
in include/tables_csum.h and a non-inline version in lib/tables_csum.c.
Rework things so that we only have the non-inline version (due to number
of calls, we should not inline this).

Fixes: 1befb38b86 ("x86: Move table csum into separate file")
Fixes: 2b445e4d31 ("x86: Move table csum into separate header")
Cc: Alexander Graf <agraf@csgraf.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-14 15:39:15 -04:00
Marek Vasut
72675b063b led: Configure LED default-state on boot
In case the DT LED subnode contains "default-state" property set to
either "on" or "off", probe the LED driver and configure the LED state
automatically.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Philippe Reynes <philippe.reynes@softathome.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Steven Lawrance <steven.lawrance@softathome.com>
[trini: Update the relevant test now that we have support]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-14 15:39:15 -04:00
Marek Vasut
0154e6de37 configs: net: dm9000: Move new Kconfig option to board configs
Drop legacy #define CONFIG_DRIVER_DM9000 from board include/configs/
and enable the same in Kconfig configs/ .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-13 15:14:31 +03:00
Marek Vasut
1494a4aace net: dm9000: Drop dm9000.h and staticize SROM access
Dispose of dm9000.h because none of the function prototypes declared in
it are called anywhere in the codebase. Staticize dm9000_read_srom_word()
because it is now called only from within the dm9000 driver. Drop
dm9000_write_srom_word() because it is no longer used.

Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13 15:13:54 +03:00
Tom Rini
2ddf84679d u-boot-imx-20220413
i.MX patches for 2022.07
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11710
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYlaYFg8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76Y1RQCgjI6iHC1yb0245e2RoV3VIeib9mEAoIUKX3yE
 HbvZYN8YZbQHlNOiSOZo
 =z3fU
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20220413' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20220413

i.MX patches for 2022.07

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11710
2022-04-13 08:00:11 -04:00
Heiko Thiery
76975d415b include: configs: *imx8*: remove IMX_FEC_BASE
The IMX_FEC_BASE value is not used when CONFIG_DM_ETH is configured. So this
value can be removed.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 21:18:02 +02:00
Heiko Thiery
fee2d974f1 kontron-pitx-imx8m: change environment address variables
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB.
To have enought space to load kernel images bigger than 32MB change the
variables to a feasible value.

The new environment variables layout is based on the scheme from
"include/configs/ti_armv7_common.h".

The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have
the same value as for the kernel_addr_r.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-04-12 21:13:56 +02:00
Marek Vasut
d7f72b6830 ARM: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board
Add new board based on the Toradex Verdin iMX8M Mini SoM, the MX8Menlo.
The board is a compatible replacement for i.MX53 M53Menlo and features
USB, multiple UARTs, ethernet, LEDs, SD and eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 21:08:23 +02:00
Jesse Taube
6f9d3da42f ARM: dts: imxrt10..-evk: Linux moved pins-imxrt1020 to dts
The Linux kernel moved dt-bindings/pinctrl/pins-imxrt to the device tree
This patch move it in U-Boot as well.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
2022-04-12 21:08:23 +02:00
Tim Harvey
f3722dd6da imx8m{m,n}_venice: update boot_net script to load fdt
Update the 'boot_net' script to load the fdt with the kernel.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 21:08:22 +02:00
Marek Vasut
bba6cc7018 ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC
Add support for Data Modul i.MX8M Mini eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR,
USB host and USB OTG.

Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2022-04-12 19:10:44 +02:00
Ariel D'Alessandro
6c317fedc7 bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.

Add support for iMX8MN BSH SMM S2 board:

- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Add support for iMX8MN BSH SMM S2 PRO board:

- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.
- 100Mbit Ethernet

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-04-12 19:10:44 +02:00
Michael Trimarchi
a2f5c9366a net: phy: nxp-tja11xx: Add NXP TJA11xx PHY driver
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special
BroadRReach 100BaseT1 PHYs used in automotive.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-12 19:10:44 +02:00
Ariel D'Alessandro
087baf80ec net: phy: Add phy_modify() accessor
Add read-modify-write unlocked accessor for accessing a PHY register.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-12 19:10:44 +02:00
Ariel D'Alessandro
d7db0e6df3 iopoll: Extend read_poll_timeout macro to support variable parameters
This macro currently supports only one parameter. Based on Linux iopoll,
let's extend read_poll_timeout common API to allow multiple variable
parameters.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-12 19:10:44 +02:00
Ariel D'Alessandro
01c67a381c phy: nxp-c45-tja11xx: Rename functions to be c45 tja11xx specific
This driver supports NXP C45 TJA11XX PHYs, but there're also other NXP
TJA11XX PHYs. Let's rename functions in this driver to be c45 variant
specific, so further drivers can be introduced adding support for NXP
TJA11XX PHYs.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-12 19:10:44 +02:00
Oleksandr Suvorov
338b9b9a19 colibri-imx6ull: drop vidargs and remove video= settings
Since we envision using overlays for display interfaces, the video=
settings within vidargs are obsolete. Remove these settings from the
U-Boot.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Philippe Schenker
05cc835135 include: colibri_vf: add missing tdxargs variable
All the other NAND-based boards have tdxargs specified for setting
manual kernel command-line arguments.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-04-12 19:10:44 +02:00
Ye Li
38149cd0cc imx: imx8ulp: Set COUNTER_FREQUENCY to 1Mhz
The COUNTER_FREQUENCY is missed in 8ulp configs, it will cause SPL
and u-boot not set the cntfrq_el0. For u-boot, this is ok, because
ATF has set it. But for SPL, it will lead delay and get_timer
not working.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 17:33:56 +02:00
Angus Ainslie
a375c6f3fb dt-bindings: imx8mq-clock: add mainline definitions
Sync the clock ids with the mainline kernel

077de6e1c9f ("clk: imx8mq: add PLL monitor output")

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Marek Vasut <marex@denx.de>
2022-04-12 17:33:55 +02:00
Adam Ford
7990277a7b arm: imx: imx8mn_beacon: Remove unnecessary configs
Because the Beacon imx8mn board uses device tree
for MMC/SD and Ethernet, there is no need to have some of the
config options. It's handled by the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 17:33:55 +02:00
Adam Ford
1a831a383c arm: imx: imx8mm_beacon: Remove unnecessary configs
Because the Beacon imx8mm board uses device tree
for MMC/SD and Ethernet, there is no need to have some of the
config options. It's handled by the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12 17:33:55 +02:00
Tim Harvey
8479b9e6c9 drivers: misc: add Gateworks System Controller driver
Add a driver for the Gateworks System Controller used on Gateworks boards
which provides a boot watchdog, power control, temperature monitor,
and voltage ADCs.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-04-12 15:36:17 +02:00
Heinrich Schuchardt
c8f9e666ab include/linux/byteorder: fix cpu_to_be32_array()
In cpu_to_be32_array() and be32_to_cpu_array() we should not compare an int
counter to a size_t parameter. Correct the type of the counter.  This
exists in upstream as b4c80629c5c9 ("include/linux/byteorder/generic.h:
fix index variables").

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-04-12 08:02:54 -04:00
Gaurav Jain
cb5d0419f5 crypto/fsl: i.MX8: Enable Job ring driver model.
i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
2022-04-12 11:19:21 +02:00
Tom Rini
a7fb97b6e6 linux/mtd/mtd.h: Add <dm/ofnode.h>
We need to know where the typedef of 'ofnode' comes from.

Fixes: c86a4de8df ("mtd: Add flash_node in struct mtd_info")
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-11 17:11:21 -04:00
Patrice Chotard
c86a4de8df mtd: Add flash_node in struct mtd_info
Currently, add_mtd_partitions_of() can be used only if dev field of
mtd_info struct is populated. It's the case, for example, for a spi nor
flash, which has a DT compatible "jedec,spi-nor" and an associated
device. mtd->dev is populated in spi_nor_scan().

But in case of a raw nand node, mtd_info's dev field can't be populated
as flash node has no compatible, so no associated device.
add_mtd_partitions_of() can't be used to parse "partitions" subnode.

To remove this constraint, add an ofnode field in mtd_info struct
which reference the DT flash node. This new field is populated by
nand_scan_tail(). This new field will be used by add_mtd_partitions_of()
to parse the flash node for "partitions" defined in DT.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Farhan Ali <farhan.ali@broadcom.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Marek Behun <marek.behun@nic.cz>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
2022-04-11 11:39:19 -04:00
SESA644425
c755aa8a1d lib: rsa: Fix const-correctness of rsassa_pss functions
Prior to introduction of modifications in rsassa_pss functions
related to padding verification, doing a pass to update
const-correctness in targeted functions to comply with
coding-rules and avoid const-cast

Signed-off-by: SESA644425 <gioja.hermann@non.se.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-11 11:39:19 -04:00
Sean Anderson
bdaeea1b68 malloc: Annotate allocator for valgrind
This annotates malloc and friends so that valgrind can track the heap. To
do this, we need to follow a few rules:

* Call VALGRIND_MALLOCLIKE_BLOCK whenever we malloc something
* Call VALGRIND_FREELIKE_BLOCK whenever we free something (generally after
  we have done our bookkeeping)
* Call VALGRIND_RESIZEINPLACE_BLOCK whenever we change the size of an
  allocation. We don't record the original request size of a block, and
  neither does valgrind. For this reason, we pretend that the old size of
  the allocation was for 0 bytes. This marks the whole allocaton as
  undefined, so in order to mark all bits correctly, we must make the whole
  new allocation defined with VALGRIND_MAKE_MEM_DEFINED. This may cause us
  to miss some invalid reads, but there is no way to detect these without
  recording the original size of the allocation.

In addition to the above, dlmalloc itself tends to make a lot of accesses
which we know are safe, but which would be unsafe outside of dlmalloc. For
this reason, we provide a suppression file which ignores errors ocurring in
dlmalloc.c

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-11 10:00:30 -04:00
Sean Anderson
fba0882bcd Add valgrind headers to U-Boot
Valgrind uses magic code sequences to define an ABI that the client may use
to request behavior from the host. In particular, this may be used to
inform valgrind about custom allocators, such as the one used in U-Boot.

This adds headers defining these sequences to U-Boot. It also adds a config
option to disable emission of these sequences entirely, in the (likely)
event that the user does not wish to use valgrind. Note that this option is
called NVALGRIND upstream, but was renamed (and inverted) to
CONFIG_VALGRIND. Aside from this and the conversion of a few instances of
VALGRIND_DO_CLIENT_REQUEST_EXPR to STMT, these headers are unmodified.

These headers were copied from valgrind 3.16.1-4 as distributed in Arch
Linux. They are licensed with the bzip2 1.16 license. This appears to be a
BSD license with some clauses from Zlib.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-11 10:00:30 -04:00
Tom Rini
33ae8c5beb Pull request for efi-2022-07-rc1
Documentation:
 
 * Describe how enable DM_SERIAL for a board
 
 UEFI
 
 * Preparatory patches for better integration of DM and UEFI
 * Use sysreset after capsule updates instead of do_reset
 * Allow to disable persisting non-volatile variables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmJSiD8ACgkQxIHbvCwF
 GsQ5FRAAhjV2q+ZawfNRkLQTI+pr/SZFH/H/LypWex8uXO6Enx8QvMU96RBMbtQI
 /LbduYDmRfhFbX2L5x+xV7feoMwvP+AOE4xmD55yuuWzmQttgEyGfwQY+mQYg3GU
 PwNkBUVN1msoOq7OFjevlk406VvnpYqvAuen1H66m0HkRe73hYucrZnt6Wxy+p+F
 fZdIaVpZc97jVHpLGNJBYg9JpUEkEeIcRaeUQHFIys/wZOiWWyTshYNLKQmfN3oV
 qNm0iDZMcqCk4XYkQR8R4IjXTHejtgGcKZaQfoLEYONpDOjG+X+nAviJaQ3BLoSK
 6+p3UhsoPgA0fT7sZg0dSn73f1xM7njDLhnR2JlZbKxDsV8SCA7+J/q7dElMX9Ld
 9/BwzqwU4WpJh4whRdpTFkcRY1ytnBBwltNo9sRm89QfHFIuT9+Rxf6s8GAcbCNU
 Pb6P6u44BkAGZG7hCUa3swh0EORISAxVhDJEEf4eWNlKHYE2A3dDFsLioGPPRoPS
 RNpXcTfz3cT2E8buDGUefKKCP+9dzSRP5HLHasibfC6LdIaR0aKTS7a1S+C0jjwj
 1W+GeStyGKzM+8hq5OREsAfCMRIs9bLq3vs+f7aPPn/FIgebLJmGFykswRQiQTAt
 B4wArS79APrqBini887EPF9LoNTtdnRCst+xmMHxVEW0yyDwZWk=
 =SxkC
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-07-rc1

Documentation:

* Describe how enable DM_SERIAL for a board

UEFI

* Preparatory patches for better integration of DM and UEFI
* Use sysreset after capsule updates instead of do_reset
* Allow to disable persisting non-volatile variables
2022-04-10 11:21:39 -04:00
Nate Drude
d79f1a8569 phy: adin: add driver for Analog Devices ADIN1300 PHY
The current implementation configures RGMII using device tree phy-mode
property and then calls genphy_config

adin_config_rgmii_mode is derived from:
https://github.com/varigit/linux-imx/blob/lf-5.10.y_var04/drivers/net/phy/adin.c#L218-L262

Signed-off-by: Nate Drude <nate.d@variscite.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-10 08:44:13 +03:00
Marek Behún
e24b58f5ed net: phy: don't require PHY interface mode during PHY creation
Currently we require PHY interface mode to be known when
finding/creating the PHY - the functions
  * phy_connect_phy_id()
  * phy_device_create()
  * create_phy_by_mask()
  * search_for_existing_phy()
  * get_phy_device_by_mask()
  * phy_find_by_mask()
all require the interface parameter, but the only thing done with it is
that it is assigned to phydev->interface.

This makes it impossible to find a PHY device without overwriting the
set mode.

Since the interface mode is not used during .probe() and should be used
at first in .config(), drop the interface parameter from these
functions. Make the default value of phydev->interface (in
phy_device_create()) to be PHY_INTERFACE_MODE_NA. Move the interface
parameter to phy_connect_dev(), where it should be.

Change all occurrences treewide. In occurrences where we don't call
phy_connect_dev() for some reason (they only configure the PHY without
connecting it to an ethernet controller), set
  phydev->interface = value from phy_find_by_mask call.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:13 +03:00
Marek Behún
79bef5fb1f net: phy: use ->is_c45 instead of is_10g_interface()
Use phydev->is_c45 instead of is_10g_interface(phydev->interface) to
determine whether clause 45 protocol should be used.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-10 08:44:13 +03:00
Marek Behún
c677fb1e31 phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition
Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition to
make it have zero value. This makes it possible (although not
encouraged) to test for invalid/nonexistent interface mode with !val
instead of val == PHY_INTERFACE_MODE_NA.

The comment near the definition says "Must be last", because when the
constant was introduced in commit 5f184715ec ("Create PHY Lib for
U-Boot"), it was used as the maximum value when interating over the
constants. But this is no longer true - we use PHY_INTERFACE_MODE_MAX
for that now, and so we can move it.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-10 08:44:13 +03:00
Marek Behún
ffb0f6f488 treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA
Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make
it compatible with Linux' naming.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:13 +03:00
Marek Behún
6706d7dcbe treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX
Rename constant PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX to
make it compatible with Linux' naming.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:13 +03:00
Marek Behún
123ca114e0 net: introduce helpers to get PHY interface mode from a device/ofnode
Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the
"phy-mode" / "phy-connection-type" property. Add corresponding UT test.

Use them treewide.

This allows us to inline the phy_get_interface_by_name() into
ofnode_read_phy_mode(), since the former is not used anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-10 08:44:12 +03:00
Marek Behún
351bfa6ebd net: mdio-uclass: add wrappers for read/write/reset operations
Add wrappers dm_mdio_read(), dm_mdio_write() and dm_mdio_reset() for
DM MDIO's .read(), .write() and .reset() operations.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10 08:44:12 +03:00
Marek Behún
f3dd213e15 net: introduce helpers to get PHY ofnode from MAC
Add helpers ofnode_get_phy_node() and dev_get_phy_node() and use it in
net/mdio-uclass.c function dm_eth_connect_phy_handle(). Also add
corresponding UT test.

This is useful because other part's of U-Boot may want to get PHY ofnode
without connecting a PHY.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-10 08:44:12 +03:00
AKASHI Takahiro
6b7a6210fd dm: add tag support
With dm-tag feature, any U-Boot subsystem is allowed to associate
arbitrary number of data with a particular udevice. This can been
see as expanding "struct udevice" without modifying the definition.

As a first user, UEFI subsystem makes use of tags to associate
an efi_disk object with a block device.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-09 21:06:31 +02:00
Andrew Jeffery
34be6968c3 gpio: Add gpio_request_by_line_name()
Add support for the upstream gpio-line-names property already described
in the common GPIO binding document[1]. The ability to search for a line
name allows boards to lift the implementation of common GPIO behaviours
away from specific line indexes on a GPIO controller.

[1] 3c35bfee83/dtschema/schemas/gpio/gpio.yaml (L17)

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2022-04-08 15:17:23 -04:00
Tom Rini
6751b70055 arm: fsl-layerscape: Migrate more DP-DDR options to Kconfig
Based on current usage, migrate a number of DP-DDR related options to
Kconfig.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
001a56b008 siemens-am33x-common: Drop CONFIG_DMA_COHERENT*
These values are not used in the code, remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
d9180c3035 m53menlo: Drop CONFIG_DISCOVER_PHY
This is not used in code, drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
d43cd486ee Convert CONFIG_FSL_QIXIS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_QIXIS
   CONFIG_QIXIS_I2C_ACCESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
388de0fa8b Convert CONFIG_DIMM_SLOTS_PER_CTLR to Kconfig
This converts the following to Kconfig:
   CONFIG_DIMM_SLOTS_PER_CTLR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
bef12ea4a3 galileo: Remove CONFIG_DESIGNWARE_ETH reference
This platform has CONFIG_ETH_DESIGNWARE set already, which is the
correct value for the driver in question.  Remove this incorrect line.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
1d2893d191 powerpc: mpc83xx: Migrate DEFAULT_IMMR to Kconfig
As no platforms override this value, set it for all mpc83xx platforms.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
f83f0cb4c7 microblaze: Migrate DCACHE/ICACHE to Kconfig
Move these two options to the arch Kconfig file.

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2022-04-08 10:46:22 -04:00
Tom Rini
6c3c05f6a4 tegra: Drop CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS
This is not currently set by any boards, so drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
53dbf1160d controlcenterdc: Migrate CUSTOMER_BOARD_SUPPORT to Kconfig
This symbol is only possibly useful on some mvebu platforms, so move the
symbol there and select it for the only current user.

Cc: Mario Six <mario.six@gdsys.cc>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-08 10:46:22 -04:00
Tom Rini
55b3ba4c2b spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to Kconfig
This is a little tricky since SoCFPGA has code to determine this as
runtime.  Introduce a guard variable for platforms to select if they
have a static value to use.  Then for ARCH_SOCFPGA, call
cm_get_qspi_controller_clk_hz() and otherwise continue the previous
behavior.

Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 10:46:22 -04:00
Tom Rini
5d14c336b2 Convert CONFIG_SH_SCIF_CLK_FREQ to Kconfig
This converts the following to Kconfig:
   CONFIG_SH_SCIF_CLK_FREQ

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:06:46 -04:00
Tom Rini
f9f3209a34 Convert CONFIG_CONS_SCIF0 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_SCIF0
   CONFIG_CONS_SCIF1
   CONFIG_CONS_SCIF2
   CONFIG_CONS_SCIF4
   CONFIG_CONS_SCIFA0

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:06:28 -04:00
Tom Rini
8c3e231b8f at91: Remove unused LED code
These LED files (and CONFIG values) are unused today, remove the code in
question.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:20 -04:00
Tom Rini
a62acac12a stm32f429-discovery: Migrate CONFIG_*_LED out of CONFIG namespace
These values are only used in one file, reference them more directly.

Cc: Kamil Lulko <kamil.lulko@gmail.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-08 09:05:20 -04:00
Tom Rini
e0f0f1836b corvus: Migrate CONFIG_*_LED out of CONFIG namespace
This code is only used on the corvus platform, so migrate the LED on/off
code to this platform and remove it from the CONFIG namespace.  In
theory, this should likely be moved to the modern GPIO LED driver as a
further cleanup.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2022-04-08 09:05:20 -04:00
Tom Rini
8ab7647297 MPC837XERDB: Stop using CONFIG_RAMDISKFILE
We don't really configure this, just set it directly in the environment
section.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:20 -04:00
Tom Rini
428eb2e26f s5p_goni, smdkc100: Move some environment settings out of CONFIG
A number of CONFIG options are used on these platforms as part of the
default environment.  Set some of these more directly and in other
cases, just reference them directly.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Tom Rini
f01928e232 arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h
This converts the following to Kconfig:
   CONFIG_CM_INIT
   CONFIG_CM_REMAP
   CONFIG_CM_SPD_DETECT
   CONFIG_CM_MULTIPLE_SSRAM
   CONFIG_CM_TCRAM

We make the first three of these options be always enabled, as that
matches usage.  We select the last two based on how they were defined in
armcoremodule.h.  This also allows us to remove some unused code in
board/armltd/integrator/lowlevel_init.S

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Tom Rini
dafcd96d8a Convert CONFIG_CMDLINE_PS_SUPPORT to Kconfig
This converts the following to Kconfig:
   CONFIG_CMDLINE_PS_SUPPORT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
Tom Rini
bd3ef27886 tegra: Migrate CI_UDC_HAS_HOSTPC to Kconfig
This option is only enabled for CI_UDC and !TEGRA20, so implement it as
such in Kconfig directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2022-04-08 09:05:19 -04:00
Tom Rini
95b641756c Convert CONFIG_BOARD_SIZE_LIMIT to Kconfig
This converts the following to Kconfig:
   CONFIG_BOARD_SIZE_LIMIT

To do this, introduce CONFIG_HAS_BOARD_SIZE_LIMIT.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 09:05:19 -04:00
He Yong
eb68ead2d3 env: fat: Allow overriding interface, device and partition
For platform which can boot on different device, this allows
to override interface, device and partition from board code

Signed-off-by: He Yong <hyyoxhk@163.com>
2022-04-07 16:50:53 -04:00
Simon Glass
49e8668181 dm: blk: Expand iteration and add tests
Add some functions which support iteration before probing. Also add tests
for the functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:03:17 -04:00
Simon Glass
e86b6f7100 dm: core: Tidy up comments in uclass headers
Improve some of the comments in these files, which don't follow the
correct style.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:03:17 -04:00
Simon Glass
bb36b9a7d6 dm: core: Add a required struct declaration
This file uses struct driver, so declare it at the top in case the
header-inclusion order is not as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:03:17 -04:00
Simon Glass
09bc3d2eac stdint: Add a definition of UINT8_MAX
This is normally defined in stdint.h but is not used in U-Boot. When
libraries (such as Chromium OS vboot) are built against U-Boot they may
expect this value to be available. Add it to avoid build errors in this
case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:03:17 -04:00
Simon Glass
a50b561333 cros_ec: Complete the comment for cros_ec_read_batt_charge()
Add the missing 'Return' information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:01:42 -04:00
Simon Glass
9dc29742c5 cbfs: Add some more definititions
Add definitions for a payload or 'self', which is like an unpacked ELF
file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:01:42 -04:00
Simon Glass
64aefc4800 errno: Avoid including strings in SPL
At present the header file defines this function in SPL but the file may
not actually be built. This causes a build error if the option is enabled.

Fix the condition in the header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-06 14:01:42 -04:00
Heinrich Schuchardt
d23f290840 dm: fix function documentation in include/dm/ofnode.h
We use Sphinx style comments to describe functions.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-04-06 09:21:49 -04:00
Lukasz Majewski
1610b68ea3 power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217
Up till now the CONFIG_POWER_TPS65217 has been defined in several header
files for am335x SoC.

This patch renames it to CONFIG_PMIC_TPS65217, which better reflects the
role of this IC circuit.

Moreover, new CONFIG_PMIC_TPS65217 has been introduced in Kconfig
to be used with boards, which both support DM_PMIC and DM_I2C.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
[trini: Migrate all other platforms as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-05 15:51:46 -04:00
Tom Rini
59bffec43a Merge branch '2022-04-04-platform-updates'
- Updates for exynos78x0 and TI K3 platforms
2022-04-05 13:45:22 -04:00
Tom Rini
037ef53cf0 Xilinx changes for v2022.07-rc1 v2
xilinx:
 - Allow booting bigger kernels till 100MB
 
 zynqmp:
 - DT updates (reset IDs)
 - Remove unneeded low level uart initialization from psu_init*
 - Enable PWM features
 - Add support for 1EG device
 
 serial_zynq:
 - Change fifo behavior in DEBUG mode
 
 zynq_sdhci:
 - Fix BASECLK setting calculation
 
 clk_zynqmp:
 - Add support for showing video clock
 
 gpio:
 - Update slg driver to handle DT flags
 
 net:
 - Update ethernet_id code to support also DM_ETH_PHY
 - Add support for DM_ETH_PHY in gem driver
 - Enable dynamic mode for SGMII config in gem driver
 
 pwm:
 - Add driver for cadence PWM
 
 versal:
 - Add support for reserved memory
 
 firmware:
 - Handle PD enabling for SPL
 - Add support for IOUSLCR SGMII configurations
 
 include:
 - Sync phy.h with Linux
 - Update xilinx power domain dt binding headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYkxUZwAKCRDKSWXLKUoM
 IXJ2AKCQcoFK7wanCCvZfuEJCSwO5E4eCACginE2CFVXKcY1P8ta4ESusjY2TH0=
 =HOoS
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2022.07-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2022.07-rc1 v2

xilinx:
- Allow booting bigger kernels till 100MB

zynqmp:
- DT updates (reset IDs)
- Remove unneeded low level uart initialization from psu_init*
- Enable PWM features
- Add support for 1EG device

serial_zynq:
- Change fifo behavior in DEBUG mode

zynq_sdhci:
- Fix BASECLK setting calculation

clk_zynqmp:
- Add support for showing video clock

gpio:
- Update slg driver to handle DT flags

net:
- Update ethernet_id code to support also DM_ETH_PHY
- Add support for DM_ETH_PHY in gem driver
- Enable dynamic mode for SGMII config in gem driver

pwm:
- Add driver for cadence PWM

versal:
- Add support for reserved memory

firmware:
- Handle PD enabling for SPL
- Add support for IOUSLCR SGMII configurations

include:
- Sync phy.h with Linux
- Update xilinx power domain dt binding headers
2022-04-05 11:27:39 -04:00
T Karthik Reddy
7011efce23 firmware: firmware-zynqmp: Add zynqmp_pm_set_gem_config api
Add zynqmp_pm_set_gem_config() api to configure GEM secure registers.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f69e32355c6a6be7d2780663353c52757530207d.1648631275.git.michal.simek@xilinx.com
2022-04-05 15:13:13 +02:00
Michal Simek
d2f059c3dc dt-bindings: xilinx: Add missing ids for PD
There are some new power domain IDs which are used in Linux kernel that's
why add them here too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/e6092e1d3766c0ac11bf620820739c93ab677a85.1648626981.git.michal.simek@xilinx.com
2022-04-05 15:12:12 +02:00
T Karthik Reddy
9b529a972d net: phy: Fix rgmii-id phy reset timeout issue
While creating a phy device using phy_device_create(), we need to
provide a valid phyaddr instead of 0 causing phy address being
registered as 0 with mdio bus and shows mdio phy list as below

ZynqMP>  mdio list
eth0:
0 - TI DP83867 <--> ethernet@ff0b0000
eth1:
0 - TI DP83867 <--> ethernet@ff0c0000

Also PHY soft reset is being requested on 0 instead of valid
address causing "PHY reset timed out" error.

So add phyaddr argument to phy_connect_phy_id() and to its prototype
to create phy device with valid phyaddress.

Fixes: a744a284e3 ("net: phy: Add support for ethernet-phy-id with gpio reset")
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/fe35fddb9faa5af577ffdfabaec6879c935a30f8.1648562755.git.michal.simek@xilinx.com
2022-04-05 15:10:54 +02:00
Tom Rini
4de720e98d Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
A big part is the DM pinctrl driver, which allows us to get rid of quite
some custom pinmux code and make the whole port much more robust. Many
thanks to Samuel for that nice contribution! There are some more or less
cosmetic warnings about missing clocks right now, I will send the trivial
fixes for that later.
Another big chunk is the mkimage upgrade, which adds RISC-V and TOC0
(secure images) support. Both features are unused at the moment, but I
have an always-secure board that will use that once the DT lands in the
kernel.
On top of those big things we have some smaller fixes, improving the
I2C DM support, fixing some H6/H616 early clock setup and improving the
eMMC boot partition support.

The gitlab CI completed successfully, including the build test for all
161 sunxi boards. I also boot tested on a A64, A20, H3, H6, and F1C100
board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2022-04-05 08:33:32 -04:00
Michal Simek
cf5ed341e4 xilinx: Increase max size of image from 60 to 100MB
Recently big Linux kernels can have more then 60MB that's why increase this
limit to also cover these large kernels.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f52f7c8ea419d69b248ba1460a96d1635194e128.1648551279.git.michal.simek@xilinx.com
2022-04-05 13:26:10 +02:00
Dave Gerlach
f861ce90ca ram: k3-ddrss: Introduce ECC Functionality for full memory space
Introduce ECC Functionality for full memory space as implemented in the
DDRSS. The following is done to accomplish this:

 * Introduce a memory region "ss" to allow dt to provide DDRSS region,
   which is not the same as "ctl" which is the controller region.

 * Introduce a "ti,ecc-enable" flag which allows a memorycontroller
   instance to enable ecc.

 * Introduce functionality to properly program the DDRSS registers to
   enable ECC for the full DDR memory space if enabled with above flag.

 * Expose a k3_ddrss_ddr_fdt_fixup call to allow fixup of fdt blob to
   account from DDR memory that must be reserved for ECC operation.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2022-04-04 19:02:04 -04:00
Dzmitry Sankouski
d5c4ec4aa3 board: axy17lte: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`

In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration

What done:
- Rearrange defconfig option order
- Add CONFIG_SAVE_PREV_BL_* options
- Doc updates:
  - remove wrong SBOOT memory corruption note, because
  memory is changed during u-boot bringup process,
  not by SBOOT
  - put payload on ramdisk place in abl boot image
  creation step

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
2022-04-04 19:02:03 -04:00
Andre Przywara
5907357322 spl: mmc: extend spl_mmc_boot_mode() to take mmc argument
Platforms can overwrite the weak definition of spl_mmc_boot_mode() to
determine where to load U-Boot proper from.
For most of them this is a trivial decision based on Kconfig variables,
but it might be desirable the probe the actual device to answer this
question.

Pass the pointer to the mmc struct to that function, so implementations
can make use of that.

Compile-tested for all users changed.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Ley Foon Tan <ley.foon.tan@inte.com> (for SoCFPGA)
Acked-by: Lokesh Vutla <lokeshvutla@ti.com> (for OMAP and K3)
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-04 23:24:17 +01:00
Samuel Holland
e9e87ec47c tools: mkimage: Add Allwinner TOC0 support
Most Allwinner sunxi SoCs have separate boot ROMs in non-secure and
secure mode. The "non-secure" or "normal" boot ROM (NBROM) uses the
existing sunxi_egon image type. The secure boot ROM (SBROM) uses a
completely different image type, known as TOC0.

A TOC0 image is composed of a header and two or more items. One item
is the firmware binary. The others form a chain linking the firmware
signature to the root-of-trust public key (ROTPK), which has its hash
burned in the SoC's eFuses. Signatures are made using RSA-2048 + SHA256.

The pseudo-ASN.1 structure is manually assembled; this is done to work
around bugs/quirks in the boot ROM, which vary between SoCs. This TOC0
implementation has been verified to work with the A50, A64, H5, H6,
and H616 SBROMs, and it may work with other SoCs.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-04 23:24:17 +01:00
Dzmitry Sankouski
f8a1b33889 board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`

In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration

What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header

Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-04 15:06:11 -04:00
Dzmitry Sankouski
12a3e1ada0 arm: init: save previous bootloader data
When u-boot is used as a chain-loaded bootloader (replacing OS kernel),
previous bootloader leaves data in RAM, that can be reused.

For example, on recent arm linux system, when chainloading u-boot,
there are initramfs and fdt in RAM prepared for OS booting. Initramfs
may be modified to store u-boot's payload, thus providing the ability to
use chainloaded u-boot to boot OS without any storage support.

Two config options added:
- SAVE_PREV_BL_INITRAMFS_START_ADDR
  saves initramfs start address to 'prevbl_initrd_start_addr' environment
  variable
- SAVE_PREV_BL_FDT_ADDR
  saves fdt address to 'prevbl_fdt_addr' environment variable

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2022-04-04 14:53:26 -04:00
Alexander Graf
5c9b420ada qemu-arm: Enable NVMe for distro boot
We already support the NVMe commands and PCIe backend in the QEMU target,
so let's make it easy for anyone to consume them and enable NVMe distro
boot along the way!

With this patch, I can put an NVMe backed disk image into my QEMU VM and
have it automatically load a UEFI target blob.

Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-04-04 14:53:26 -04:00
Tom Rini
01f1ab67f3 Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-04 10:48:44 -04:00
Sean Anderson
7a76347189 serial: dm: Add support for puts
Some serial drivers can be vastly more efficient when printing multiple
characters at once. Non-DM serial has had a puts option for these sorts
of drivers; implement it for DM serial as well.

Because we have to add carriage returns, we can't just pass the whole
string directly to the serial driver. Instead, we print up to the
newline, then print a carriage return, and then continue on. This is
less efficient, but it is better than printing each character
individually. It also avoids having to allocate memory just to add a few
characters.

Drivers may perform short writes (such as filling a FIFO) and return the
number of characters written in len. We loop over them in the same way
that _serial_putc loops over putc.

This results in around sizeof(void *) growth for all boards with
DM_SERIAL. The full implementation takes around 140 bytes.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-01 16:56:54 -04:00
Sean Anderson
bbe310cdaf arm64: Catch non-emulated semihosting calls
If a debugger is not attached to U-Boot, semihosting calls will raise a
synchronous abort exception. Try to catch this and disable semihosting
so we can e.g. use another uart if one is available. In the immediate
case, we return an error, since it is not always possible to check for
semihosting beforehand (debug uart, user-initiated load command, etc.)

We handle all possible semihosting instructions, which is probably
overkill. However, we do need to keep track of what instruction set
we're using so that we don't suppress an actual error.

A future enhancement could try to determine semihosting capability by
inspecting the processor state.  There's an example of this at [1] for
RISC-V. The equivalent for ARM would inspect the monitor modei
enable/select bits of the DSCR. However, as the article notes, an
exception handler is still helpful in order to catch disconnected
debuggers.

[1] https://tomverbeure.github.io/2021/12/30/Semihosting-on-RISCV.html#avoiding-hangs-when-a-debugger-is-not-connected

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 16:56:53 -04:00
Sean Anderson
385d69d76b arm: smh: Add option to detect semihosting
These functions are intended to support detecting semihosting and
falling back gracefully to alternative implementations. The test starts
by making semihosting call. SYS_ERRNO is chosen because it should not
mutate any state. If this semihosting call results in an exception
(rather than being caught by the debugger), then the exception handler
should call disable_semihosting() and resume execution after the call.

Ideally, this would just be part of semihosting by default, and not a
separate config. However, to reduce space ARM SPL doesn't include
exception vectors by default. This means we can't detect if a
semihosting call failed unless we enable them. To avoid forcing them to
be enabled, we use a separate config option. It might also be possible
to try and detect whether a debugger has enabled (by reading HDE from
DSCR), but I wasn't able to figure out a way to do this from all ELs.

This patch just introduces the generic code to handle detection. The
next patch will implement it for arm64 (but not arm32).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 16:56:53 -04:00
Sean Anderson
93c3d32970 ls1046ardb: Add support for JTAG boot
This adds support for booting entirely from JTAG while using a
hard-coded RCW. With these steps, it is not necessary to program a
"good" RCW using CodeWarrior. The method here can be performed with any
JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP
(albeit very slowly).

These steps require LS1046A support in OpenOCD, which was added in [1].

[1] 5b70c1f679/

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
[trini: Add reference to doc/board/nxp/ls1046ardb.rst]
2022-04-01 16:56:44 -04:00
Sean Anderson
74d11d37e2 serial: Add semihosting driver
This adds a serial driver which uses semihosting calls to read and write
to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled,
we will instantiate a serial driver. This allows users to enable this
driver (which has no physical device) without modifying their device
trees or board files. We also implement a non-DM driver for SPL, or for
much faster output in U-Boot proper.

There are three ways to print to the console:

Method              Baud
================== =====
smh_putc in a loop   170
smh_puts            1600
smh_write with :tt 20000
================== =====

These speeds were measured using a 175 character message with a J-Link
adapter. For reference, U-Boot typically prints around 2700 characters
during boot on this board. There are two major factors affecting the
speed of these functions. First, each breakpoint incurs a delay. Second,
each debugger memory transaction incurs a delay. smh_putc has a
breakpoint and memory transaction for every character. smh_puts has one
breakpoint, but still has to use a transaction for every character. This
is because we don't know the length up front, so OpenOCD has to check if
each character is nul. smh_write has only one breakpoint and one memory
transfer.

DM serial drivers can only implement a putc interface, so we are stuck
with the slowest API. Non-DM drivers can implement puts, which is vastly
more efficient. When the driver starts up, we try to open :tt. Since
this is an extension, this may fail. If it does, we fall back to
smh_puts. We don't check :semihosting-features, since there are
nonconforming implementations (OpenOCD) which don't implement it (but
*do* implement :tt).

Some semihosting implementations (QEMU) don't handle READC properly. To
work around this, we try to use open/read (much like for stdin) if
possible.

There is no non-blocking I/O available, so we don't implement pending.
This will cause __serial_tstc to always return true. If
CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read
characters forever. To avoid this, we depend on this config being
disabled.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-01 15:03:13 -04:00
Sean Anderson
3ea744e873 arm: smh: Add some functions for working with the host console
This adds three wrappers around the semihosting commands for reading and
writing to the host console. We use the more standard getc/putc/puts
names instead of readc/writec/write0 for familiarity.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Sean Anderson
dcc4f9623e arm: smh: Remove smhload command
This command's functionality is now completely implemented by the
standard fs load command. Convert the vexpress64 boot command (which is
the only user) and remove the implementation.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Sean Anderson
f676b45151 fs: Add semihosting filesystem
This adds a filesystem which is backed by the host's filesystem. It is
modeled off of sandboxfs, which has very similar aims. Semihosting
doesn't support listing directories (except with SYS_SYSTEM), so neither
do we. it's possible to optimize a bit for the common case of reading a
whole file by omitting a call to smh_seek, but this is left as a future
optimization.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Sean Anderson
12a05b3bcd arm: smh: Add some file manipulation commands
In order to add filesystem support, we will need to be able to seek and
write files. Add the appropriate helper functions.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Sean Anderson
79f6ad6a7b arm: smh: Document functions in header
This adds some documentation for semihosting functions in the header.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Sean Anderson
eff77c3a24 arm: smh: Use numeric modes for smh_open
There's no point in using string constants for smh_open if we are just
going to have to parse them. Instead, use numeric modes. The user needs
to be a bit careful with these, since they are much closer semantically
to string modes used by fopen(3) than the numeric modes used with
open(2).

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Sean Anderson
b10f724807 arm: smh: Export semihosting functions
This exports semihosting functions for use in other files. The header is
in include/ and not arm/include/asm because I anticipate that RISC-V may
want to add their own implementation at some point.

smh_len_fd has been renamed to smh_flen to more closely match the
semihosting spec.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01 15:03:13 -04:00
Peter Hoyes
8d78a6b674 vexpress64: Add ARMv8R-64 board variant
The ARMv8-R64 architecture introduces optional VMSA (paging based MMU)
support in the EL1/0 translation regime, which makes that part mostly
compatible to ARMv8-A.

Add a new board variant to describe the "BASE-R64" FVP model, which
inherits a lot from the existing v8-A FVP support. One major difference
is that the memory map in "inverted": DRAM starts at 0x0, MMIO is at
2GB [1].

 * Create new TARGET_VEXPRESS64_BASER_FVP target, sharing most of the
   exising configuration.
 * Implement inverted memory map in vexpress_aemv8.h
 * Create vexpress_aemv8r defconfig
 * Provide an MMU memory map for the BASER_FVP
 * Update vexpress64 documentation

At the moment the boot-wrapper is the only supported secure firmware. As
there is no official DT for the board yet, we rely on it being supplied
by the boot-wrapper into U-Boot, so use OF_HAS_PRIOR_STAGE, and go with
a dummy DT for now.

[1] https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
[Andre: rebase and add Linux kernel header]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[trini: Add MAINTAINERS entry for Peter]
2022-04-01 15:03:03 -04:00
Andre Przywara
30cacb8123 vexpress64: generalise page table generation
In preparation for the ARMv8-R64 FVP support, which has DRAM mapped at
0x0, generalise the page table generation, by using symbolic names for
the address ranges instead of fixed numbers.

We already define the base of the DRAM and MMIO regions, so just use
those symbols in the page table description. Rename V2M_BASE to the more
speaking V2M_DRAM_BASE on the way.

On the VExpress memory map, the address space right after 4GB is of no
particular interest to software, as the whole of DRAM is mapped at 32GB
instead. The first 2 GB alias to the lower 2GB of DRAM mapped below 4GB,
so we skip this part and map some more of the high DRAM, should anyone
need it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:59:15 -04:00
Andre Przywara
8a0a8ff52c vexpress64: fvp: add distro_boot support
So far the FVP model just supports booting through semihosting, so by
loading files from the host the model is running on. This allows for
quick booting of new kernels (or replacing DTBs), but prevents more
featureful boots like using UEFI.

Enable the distro_boot feature, and provide a list of possible boot
sources that U-Boot should check:
- For backwards compatibility we start with semihosting, which gets its
  commands migrated from CONFIG_BOOTCOMMAND into the distro_boot
  infrastructure. This is also slightly tweaked to fail graceful in case
  the required files could not be found.
- Next we try to use a user provided script, that could be easily
  placed into memory using the model command line.
- Since we gained virtio support with the enablement of OF_CONTROL,
  let's check virtio block devices next. This is where UEFI boot can
  be easily used, for instance by providing a distro installer .iso
  file through virtio-blk.
- Networking is now provided by virtio as well, so enable the default
  PXE and DHCP boot flows, mostly because we can.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:58:16 -04:00
Andre Przywara
e09ec8e340 vexpress64: config header: unify environment definition
The definition of the standard environment variables (kernel_addr_r and
friends) has been improved lately for the FVP model, but the Juno board
is still using some custom scheme.
Since we need to extend this to a third board soon, let's unify the
definition:
- Define the Juno addresses in the same generic way we do for the FVP
  model, and move the actual variable setting out of the board #ifdef's.
- Add the missing addresses for a PXE file and a boot script.
- Cleanup some stale comments on the way.

As the FVP model doesn't have support for distro_boot quite yet, add
a dummy definition for now, to be replaced with the real thing later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01 14:56:26 -04:00
Tom Rini
e4d741f8ab Convert CONFIG_SYS_MONITOR_BASE to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_BASE

Note that for how this is re-used on some PowePC platforms, we introduce
CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the
CONFIG_VAL macro to get the correct value at build time, in the code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
d4a2c400d1 Convert CONFIG_NORFLASH_PS32BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_NORFLASH_PS32BIT

Note that we also attempt to correct the behavior of the code here,
which had been testing for "NORFLASH_PS32BIT" which would never be set,
instead check for the now set "CONFIG_NORFLASH_PS32BIT", which results
in some behavior change.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
2c32f24f95 at91: Switch to SD_BOOT / CONFIG_NAND_BOOT
The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the
same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using
these switches instead as they're already in Kconfig.

Cc: Stelian Pop <stelian@popies.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
f2428acbf1 Convert CONFIG_E300 et al to Kconfig
This converts the following to Kconfig:
   CONFIG_E300
   CONFIG_E5500

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
f13d7e21fc mx53loco: Convert CONFIG_DIALOG_POWER to Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
38c108f88d exynos: Drop CONFIG_DEVICE_TREE_LIST
This value isn't used anywhere, drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
28f9c3125d Convert CONFIG_DEEP_SLEEP to Kconfig
This converts the following to Kconfig:
   CONFIG_DEEP_SLEEP

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
ac28e20842 M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZE
In the case of M5373EVB we always had NANDFLASH_SIZE=16, so just use it
directly.  In the case of M5329EVB we had not removed the rest of NAND
support when saying we didn't have NAND, so instead use that to key off
of rather than NANDFLASH_SIZE.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
225aaacf36 db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP
The value CONFIG_DB_784MP_GP is only used in the DDR code to refer to
CONFIG_TARGET_DB_MV784MP_GP so just use that second value directly.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-01 10:28:47 -04:00
Tom Rini
53f2222c71 p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIM
These are not referenced in code, drop.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
15b4aed473 Convert CONFIG_CLOCKS to Kconfig
This converts the following to Kconfig:
   CONFIG_CLOCKS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
b20e79f0bb Convert CONFIG_CLOCK_SYNTHESIZER to Kconfig
This converts the following to Kconfig:
   CONFIG_CLOCK_SYNTHESIZER

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:47 -04:00
Tom Rini
a9ee1ad95a exynos: Drop CONFIG_CLK_*
We only set one of these values ever at this point, so remove dead code.

Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-01 10:28:47 -04:00
Tom Rini
d7b7e3e906 Convert CONFIG_SYS_USE_NORFLASH et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_USE_NORFLASH
   CONFIG_SYS_USE_BOOT_NORFLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
36a4dae18f global: Remove CONFIG_SYS_USE_DATAFLASH*
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none
of them now control anything further within their board config.h files,
so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty
blocks in the board config.h files.  In a few places further clean up
related logic.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
db48e52584 Convert CONFIG_LPUART et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LPUART
   CONFIG_LPUART_32B_REG

And note that CONFIG_LPUART_32B_REG is unused in code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
11f077bb20 mpc8548cds: Rework CONFIG_LEGACY usage
This CONFIG option is used in one place, so pick a more direct name and
migrate to Kconfig.  Rework the code slightly.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
3c205a6e4a Convert CONFIG_MCFRTC et al to Kconfig
This converts the following to Kconfig:
   CONFIG_MCFRTC
   CONFIG_SYS_MCFRTC_BASE

While at it, remove '#undef RTC_DEBUG' from these config files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
b7872641a8 stmark2: Remove CONFIG_SERIAL_FLASH
This is not referenced anywhere, remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
143a365a5b Convert CONFIG_MCFTMR to Kconfig
This converts the following to Kconfig:
   CONFIG_MCFTMR

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
f88e9f5ab8 Convert CONFIG_CF_DSPI to Kconfig
This converts the following to Kconfig:
   CONFIG_CF_DSPI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
c3cdca48df atmel: Remove CONFIG_SPL_ATMEL_SIZE
This seems to be unused in the code, remove it.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
47267f8261 Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAME
Both of these variables are used in a few hard-coded ways to set some
string values or print something to the user.  In almost all cases, it's
just as useful to hard-code the value used.  The exception here is
printing something closer to correct board name for p1_p2_rdb machines.
This can be done using something from the device tree, but for now
hard-code a non-CONFIG based value instead.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
448dfb407f Convert CONFIG_BITBANGMII_MULTI to Kconfig
This converts the following to Kconfig:
   CONFIG_BITBANGMII_MULTI

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
797c2b4a1a Convert CONFIG_BCM2835_GPIO to Kconfig
This converts the following to Kconfig:
   CONFIG_BCM2835_GPIO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:46 -04:00
Tom Rini
439cc7fb05 Finish converting CONFIG_BOOTM_NETBSD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTM_NETBSD
   CONFIG_BOOTM_RTEMS
   CONFIG_DESIGNWARE_WATCHDOG
   CONFIG_DISPLAY_CPUINFO
   CONFIG_DM_ETH
   CONFIG_DM_MMC
   CONFIG_DM_REGULATOR
   CONFIG_DM_SPI
   CONFIG_DM_SPI_FLASH
   CONFIG_ISO_PARTITION
   CONFIG_OF_SEPARATE
   CONFIG_SPI_FLASH_WINBOND
   CONFIG_SPL_ETH
   CONFIG_TIMER
   CONFIG_USB_DWC3
   CONFIG_USB_DWC3_GADGET
   CONFIG_USB_DWC3_OMAP
   CONFIG_USB_DWC3_PHY_OMAP
   CONFIG_USB_EHCI_TEGRA
   CONFIG_USB_GADGET_DOWNLOAD
   CONFIG_USB_GADGET_DUALSPEED
   CONFIG_USB_GADGET_MANUFACTURER
   CONFIG_USB_GADGET_PRODUCT_NUM
   CONFIG_USB_GADGET_VBUS_DRAW
   CONFIG_USB_GADGET_VENDOR_NUM

This catches a number of cases where board config files were #undef
various CONFIG options when building SPL, and that doesn't work.  Clean
up the related comments as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:45 -04:00
Philippe Reynes
6e052d1cba mkimage: add public key for image pre-load stage
This commit enhances mkimage to update the node
/image/pre-load/sig with the public key.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31 14:12:01 -04:00
Philippe Reynes
9d46e63d97 cmd: bootm: add a stage pre-load
Add a stage pre-load to the command bootm.
Right now, this stage may be used to read a
header and check the signature of the full
image.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31 14:12:01 -04:00
Philippe Reynes
982207435a boot: image: add a stage pre-load
Add a stage pre-load that could
check or modify an image.

For the moment, only a header with a signature is
supported. This header has the following format:
- magic : 4 bytes
- version : 4 bytes
- header size : 4 bytes
- image size : 4 bytes
- offset image signature : 4 bytes
- flags : 4 bytes
- reserved0 : 4 bytes
- reserved1 : 4 bytes
- sha256 of the image signature : 32 bytes
- signature of the first 64 bytes : n bytes
- image signature : n bytes
- padding : up to header size

The stage uses a node /image/pre-load/sig to
get some informations:
- algo-name (mandatory) : name of the algo used to sign
- padding-name : name of padding used to sign
- signature-size : size of the signature (in the header)
- mandatory : set to yes if this sig is mandatory
- public-key (madatory) : value of the public key

Before running the image, the stage pre-load checks
the signature provided in the header.

This is an initial support, later we could add the
support of:
- ciphering
- uncompressing
- ...

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-31 14:12:01 -04:00
Tim Harvey
52ae8d6cc8 board: gateworks: venice: determine dram size at runtime
The SPL does not update the memory node with the dram size from EEPROM
but instead we can use get_ram_size which does a simple memory test
to determine the available RAM. Update PHYS_SDRAM_SIZE to 4GiB as that
is the max used on the Venice boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-03-31 08:27:52 -04:00
Sean Anderson
3a11b5ae65 clk: ccf: Add some helper functions for clock ops
Most CCF drivers follow a common pattern where their clock ops defer the
actual operation to the backing CCF clock. Add some generic implementations
of these functions to reduce duplication of code.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220320203446.740178-1-seanga2@gmail.com
2022-03-30 13:03:29 -04:00
Sean Anderson
ac15e789ca clk: Make clk_free return void
Most callers of this function do not check the return value, and it is
unclear what action they should take if it fails. If a function is freeing
multiple clocks, it should not stop just because the first one failed.
Since the callbacks can no longer fail, just convert the return type to
void.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20220115222504.617013-8-seanga2@gmail.com
2022-03-30 13:02:55 -04:00
Sean Anderson
276d446757 clk: Make rfree return void
When freeing a clock there is not much we can do if there is an error, and
most callers do not actually check the return value. Even e.g. checking to
make sure that clk->id is valid should have been done in request() in the
first place (unless someone is messing with the driver behind our back).
Just return void and don't bother returning an error.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20220115222504.617013-2-seanga2@gmail.com
2022-03-30 13:02:55 -04:00
Michal Simek
7ce9d921bd dt-bindings: phy: Sync phy.h with Linux kernel
Make sure that both files are in sync to have the same values in DTs.
The patch is fixing SPDX license as is used in the kernel and adding new
values for PHY_TYPE_DPHY and PHY_TYPE_CPHY.

SPDX license change was done by:
Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de
and new value added by:
Link: https://lore.kernel.org/r/20210617144349.28448-3-jonathan@marek.ca

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/06dbc03d4c9ac5d621341d8fb8cc16f489062b39.1648113469.git.michal.simek@xilinx.com
2022-03-29 09:17:49 +02:00
Marek Vasut
25cff0c1fa arm: socfpga: vining: Fix mtdparts for 2x256 MiB SF variant
The 2x256 MiB SF variant of this system has 192 MiB rootfs MTD partition
containing UBI on SF0, use the correct size in U-Boot environment, else
U-Boot cannot mount UBI and boot on this variant.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Cc: Tom Rini <trini@konsulko.com>
2022-03-28 21:49:03 +02:00
Simon Glass
2cbc1c019b video: Convert CONFIG_VIDEO_BCM2835 to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_BCM2835

This is the final ad-hoc CONFIG_VIDEO_... to convert.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-03-28 20:28:56 +02:00
Simon Glass
92e3fb8b5e video: Drop FSL DIU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:16 +02:00
Simon Glass
77f46f0607 video: fsl: colibri_vf: Drop FSL DCU driver
This does not use driver model and is more than two years past the
migration date. Drop it.

It can be added back later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:18:07 +02:00
Simon Glass
50800147b4 video: Clean up the uclass header
Drop the unnecessary cruft from this header and update the title.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:17:20 +02:00
Simon Glass
1fa43cad86 video: Drop references to CONFIG_VIDEO et al
Drop the Kconfigs which are not used and all references to them. In
particular, this drops CONFIG_VIDEO to avoid confusion and allow us to
eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO.

Also drop the prototype for video_get_info_str() which is no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
2022-03-28 20:17:07 +02:00
Simon Glass
82975f8a9e video: Drop CONFIG_VIDEO_BMP_LOGO
This option is not implemented anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:16:56 +02:00
Simon Glass
fff49e01d8 video: Drop video_fb header
This is not used now. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28 20:16:46 +02:00
Tom Rini
34d2b7f203 Prepare v2022.04-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmJBxXQACgkQFHw5/5Y0
 tywKKAv+L+sCmqfJ4Zy2cdzWkGZI3NZMWi8yzUUU37RH5I+3Blht+z6dMslm9gCB
 7/PwS5y7WH3l3wEdeXcw4FUCgNh3D8YyfCcVCsQ0Qxig49xwWz8Jn6t+haOWD6eW
 uXim+gSG+ceWTBrKf3InzXN5fHPIcF66r+k3opwAwIYKpT8p8CgM4ewshBCAsc6t
 6qSLf+A64JNv/y2DTS+sPDY68tnplbyRvrNb6YEazOF6b6SnSE2j+EH8RkIZ+2yT
 cTUhQ2o9JJIKnaG9MTqHB+XVe80oPB7bTWInFo2JxGn98XeS7CTCcnDZhLqWrvHF
 gBfcpEcVE2blVbg/Vo2x4rnU1dop44ch6pE9k5SPFJcPdlzdwFHHgGyfGi9LtD4K
 JAvaIQdz6ZEOQqShpCxcbL/g2/uoRaXFqC7E8IE+WdFMXGBQoZpqaoBMoefnyplk
 xrzqaQye38JgZDX0ku4cm4SMArAfr4sVHcdDlSlzY3y2KQ8Ead25irRvq7GoQ2Ad
 Odo9taQF
 =9g2Y
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc5' into next

Prepare v2022.04-rc5
2022-03-28 12:36:49 -04:00
Han Xu
ed48490f8d mtd: gpmi: fix the bch setting backward compatible issue
Previous u-boot code changed the default bch setting behavior and caused
backward compatible issue. This fix choose the legacy bch geometry back
again as the default option. If the minimum ecc strength that NAND chips
required need to be chosen, it can be enabled by either adding DT flag
"fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The
unused flag "fsl,legacy-bch-geometry" get removed.

Fixes: 51cdf83eea (mtd: gpmi: provide the option to use legacy bch geometry)
Fixes: 616f03daba (mtd: gpmi: change the BCH layout setting for large oob NAND)
Tested-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-28 08:22:17 -04:00
Philip Oberfichtner
a194d59eec power: pfuze100: Add MEMx register definitions
Add missing MEMA - MEMD register definitions for PFUZE100.

Based on work from Heiko Schocher <hs@denx.de>.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-03-25 16:42:40 -04:00
Pali Rohár
d158fa1b8b pci: Remove duplicate PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* macros
Macros PCI_CLASS_CODE_* and PCI_CLASS_SUB_CODE_* are unused and are
duplication of PCI_CLASS_* macros defined in pci_ids.h header file.
So remove them.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-25 13:35:50 -04:00
Pali Rohár
d7b904092d pci: Add defines for normal and subtractive PCI bridges
Add following two new PCI class codes defines into pci_ids.h include file:

  PCI_CLASS_BRIDGE_PCI_NORMAL
  PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE

And use these defines in all U-Boot code for describing PCI class codes for
normal and subtractive PCI bridges.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-25 13:35:50 -04:00
Tom Rini
b40d2b2891 Convert CONFIG_BACKSIDE_L2_CACHE to Kconfig
This converts the following to Kconfig:
   CONFIG_BACKSIDE_L2_CACHE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
2665853a5f vinco: Remove CONFIG_ATMEL_SPI0
This is not referenced anywhere, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
61b9c42e8c lcd: Remove LCD_TEST_PATTERN code
This is a legacy driver and the value is set in board config headers
without a CONFIG prefix.  Remove the code.

Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
3e2ea3278e Convert CONFIG_LCD_INFO et al to Kconfig
This converts the following to Kconfig:
   CONFIG_LCD_INFO
   CONFIG_LCD_LOGO
   CONFIG_LCD_INFO_BELOW_LOGO
   CONFIG_LCD_IN_PSRAM

Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
286c4531ad Convert CONFIG_ATMEL_LCD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ATMEL_LCD
   CONFIG_ATMEL_LCD_BGR555
   CONFIG_ATMEL_LCD_RGB565
   CONFIG_GURNARD_SPLASH

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
cc386f161c Convert CONFIG_MII_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_MII_INIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
16199a8b96 Convert CONFIG_PHY_RESET_DELAY to Kconfig
This converts the following to Kconfig:
   CONFIG_PHY_RESET_DELAY

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
0b956e3987 Convert CONFIG_SYS_RX_ETH_BUFFER to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_RX_ETH_BUFFER

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
6329dda175 Convert CONFIG_LPC32XX_ETH to Kconfig
This converts the following to Kconfig:
   CONFIG_LPC32XX_ETH

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
5842c8107d Convert CONFIG_TFTP_PORT to Kconfig
This converts the following to Kconfig:
   CONFIG_TFTP_PORT

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
03d14ccdf6 Convert CONFIG_RMII to Kconfig
This converts the following to Kconfig:
   CONFIG_RMII

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
1d5686acfd Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_FAULT_ECHO_LINK_DOWN

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
29cc2b542d Convert CONFIG_RESET_PHY_R to Kconfig
This converts the following to Kconfig:
   CONFIG_RESET_PHY_R

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
5a606a4c97 Convert CONFIG_AT91_WANTS_COMMON_PHY to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_WANTS_COMMON_PHY

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Tom Rini
210a4b46bd Convert CONFIG_AT91_LED to Kconfig
This converts the following to Kconfig:
   CONFIG_AT91_LED

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 12:01:15 +00:00
Heinrich Schuchardt
b78631d54f efi_loader: remove efi_disk_is_system_part()
The block IO protocol may be installed on any handle. We should make
no assumption about the structure the handle points to.

efi_disk_is_system_part() makes an illegal widening cast from a handle
to a struct efi_disk_obj. Remove the function.

Fixes: Fixes: 41fd506842 ("efi_loader: disk: add efi_disk_is_system_part()")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
90dcd9b2d3 efi_loader: export efi_system_partition_guid
The efi_system_partition_guid is needed in multiple places. Export it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
e46ef1db9e efi_loader: efi_dp_find_obj() add protocol check
Let function efi_dp_find_obj() additionally check if a given protocol is
installed on the handle relating to the device-path.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
c409593d08 efi_loader: fix efi_dp_find_obj()
efi_dp_find_obj() should not return any handle with a partially matching
device path but the handle with the maximum matching device path.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Heinrich Schuchardt
8399488672 efi_loader: export efi_dp_shorten()
Rename function shorten_path() to efi_dp_shorten() and export it.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-20 11:03:06 +01:00
Tom Rini
cb81640011 Convert CONFIG_ATMEL_LEGACY to Kconfig
This converts the following to Kconfig:
   CONFIG_ATMEL_LEGACY

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:18 -04:00