u-boot/arch/arm/cpu/armv8/fsl-layerscape/Kconfig

666 lines
17 KiB
Text
Raw Normal View History

config ARCH_LS1012A
bool
select ARMV8_SET_SMPEN
select ARM_ERRATA_855873 if !TFABOOT
select FSL_LAYERSCAPE
select FSL_LSCH2
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select SYS_I2C_MXC_I2C1 if !DM_I2C
select SYS_I2C_MXC_I2C2 if !DM_I2C
imply PANIC_HANG
config ARCH_LS1028A
bool
select ARMV8_SET_SMPEN
select FSL_LAYERSCAPE
select FSL_LSCH3
select NXP_LSCH3_2
select SYS_FSL_HAS_CCI400
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select FSL_TZASC_1
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A008514 if !TFABOOT
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A050382
select SYS_FSL_ERRATUM_A011334
select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
select RESV_RAM if GIC_V3_ITS
imply PANIC_HANG
config ARCH_LS1043A
bool
select ARMV8_SET_SMPEN
select ARM_ERRATA_855873 if !TFABOOT
select FSL_LAYERSCAPE
select FSL_LSCH2
select HAS_FSL_XHCI_USB if USB_HOST
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009660 if !TFABOOT
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select SYS_I2C_MXC_I2C1 if !DM_I2C
select SYS_I2C_MXC_I2C2 if !DM_I2C
select SYS_I2C_MXC_I2C3 if !DM_I2C
select SYS_I2C_MXC_I2C4 if !DM_I2C
imply CMD_PCI
imply ID_EEPROM
config ARCH_LS1046A
bool
select ARMV8_SET_SMPEN
select FSL_LAYERSCAPE
select FSL_LSCH2
select HAS_FSL_XHCI_USB if USB_HOST
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_BE
select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A008336 if !TFABOOT
select SYS_FSL_ERRATUM_A008511 if !TFABOOT
select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803 if !TFABOOT
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A010539
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select SYS_I2C_MXC_I2C1 if !DM_I2C
select SYS_I2C_MXC_I2C2 if !DM_I2C
select SYS_I2C_MXC_I2C3 if !DM_I2C
select SYS_I2C_MXC_I2C4 if !DM_I2C
imply ID_EEPROM
imply SCSI
imply SCSI_AHCI
config ARCH_LS1088A
bool
select ARMV8_SET_SMPEN
select ARM_ERRATA_855873 if !TFABOOT
select FSL_LAYERSCAPE
select FSL_LSCH3
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
select SYS_FSL_ERRATUM_A009803 if !TFABOOT
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A008511 if !TFABOOT
select SYS_FSL_ERRATUM_A008850 if !TFABOOT
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_DDR4
select SYS_FSL_HAS_RGMII
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_1
select SYS_FSL_SRDS_2
select FSL_TZASC_1
select FSL_TZASC_400
select FSL_TZPC_BP147
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select SYS_I2C_MXC_I2C1 if !TFABOOT
select SYS_I2C_MXC_I2C2 if !TFABOOT
select SYS_I2C_MXC_I2C3 if !TFABOOT
select SYS_I2C_MXC_I2C4 if !TFABOOT
select RESV_RAM if GIC_V3_ITS
imply ID_EEPROM
imply SCSI
imply PANIC_HANG
config ARCH_LS2080A
bool
select ARMV8_SET_SMPEN
select ARM_ERRATA_826974
select ARM_ERRATA_828024
select ARM_ERRATA_829520
select ARM_ERRATA_833471
select FSL_LAYERSCAPE
select FSL_LSCH3
select SYS_FSL_SRDS_1
select SYS_HAS_SERDES
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_HAS_CCN504
select SYS_FSL_HAS_DP_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_DDR4
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select SYS_FSL_SRDS_2
select FSL_TZASC_1
select FSL_TZASC_2
select FSL_TZASC_400
select FSL_TZPC_BP147
select SYS_FSL_ERRATUM_A008336 if !TFABOOT
select SYS_FSL_ERRATUM_A008511 if !TFABOOT
select SYS_FSL_ERRATUM_A008514 if !TFABOOT
select SYS_FSL_ERRATUM_A008585
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009635
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A009801
select SYS_FSL_ERRATUM_A009803 if !TFABOOT
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
select SYS_FSL_ERRATUM_A010165 if !TFABOOT
select SYS_FSL_ERRATUM_A009203
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select SYS_I2C_MXC_I2C1 if !TFABOOT
select SYS_I2C_MXC_I2C2 if !TFABOOT
select SYS_I2C_MXC_I2C3 if !TFABOOT
select SYS_I2C_MXC_I2C4 if !TFABOOT
select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply ID_EEPROM
imply PANIC_HANG
config ARCH_LX2162A
bool
select ARMV8_SET_SMPEN
select FSL_LSCH3
select NXP_LSCH3_2
select SYS_HAS_SERDES
select SYS_FSL_SRDS_1
select SYS_FSL_SRDS_2
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
select SYS_FSL_ERRATUM_A050204
select SYS_FSL_ERRATUM_A011334
select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
select SYS_FSL_HAS_RGMII
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_CCN508
select SYS_FSL_HAS_DDR4
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply PANIC_HANG
imply SCSI
imply SCSI_AHCI
config ARCH_LX2160A
bool
select ARMV8_SET_SMPEN
select FSL_LSCH3
select HAS_FSL_XHCI_USB if USB_HOST
select NXP_LSCH3_2
select SYS_HAS_SERDES
select SYS_FSL_SRDS_1
select SYS_FSL_SRDS_2
select SYS_NXP_SRDS_3
select SYS_FSL_DDR
select SYS_FSL_DDR_LE
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
select SYS_FSL_ERRATUM_A050204
select SYS_FSL_ERRATUM_A011334
select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
select SYS_FSL_HAS_RGMII
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_CCN508
select SYS_FSL_HAS_DDR4
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply ID_EEPROM
imply PANIC_HANG
imply SCSI
imply SCSI_AHCI
config FSL_LSCH2
bool
select SYS_FSL_HAS_CCI400
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_BE
config FSL_LSCH3
select ARCH_MISC_INIT
bool
config NXP_LSCH3_2
bool
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
config FSL_LAYERSCAPE
bool
config HAS_FEATURE_GIC64K_ALIGN
bool
default y if ARCH_LS1043A
config HAS_FEATURE_ENHANCED_MSI
bool
default y if ARCH_LS1043A
menu "Layerscape PPA"
config FSL_LS_PPA
bool "FSL Layerscape PPA firmware support"
depends on !ARMV8_PSCI
select ARMV8_SEC_FIRMWARE_SUPPORT
select SEC_FIRMWARE_ARMV8_PSCI
select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
help
The FSL Primary Protected Application (PPA) is a software component
which is loaded during boot stage, and then remains resident in RAM
and runs in the TrustZone after boot.
Say y to enable it.
config SPL_FSL_LS_PPA
bool "FSL Layerscape PPA firmware support for SPL build"
depends on !ARMV8_PSCI
select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
select SEC_FIRMWARE_ARMV8_PSCI
select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
help
The FSL Primary Protected Application (PPA) is a software component
which is loaded during boot stage, and then remains resident in RAM
and runs in the TrustZone after boot. This is to load PPA during SPL
stage instead of the RAM version of U-Boot. Once PPA is initialized,
the rest of U-Boot (including RAM version) runs at EL2.
choice
prompt "FSL Layerscape PPA firmware loading-media select"
depends on FSL_LS_PPA
default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
default SYS_LS_PPA_FW_IN_XIP
config SYS_LS_PPA_FW_IN_XIP
bool "XIP"
help
Say Y here if the PPA firmware locate at XIP flash, such
as NOR or QSPI flash.
config SYS_LS_PPA_FW_IN_MMC
bool "eMMC or SD Card"
help
Say Y here if the PPA firmware locate at eMMC/SD card.
config SYS_LS_PPA_FW_IN_NAND
bool "NAND"
help
Say Y here if the PPA firmware locate at NAND flash.
endchoice
config LS_PPA_ESBC_HDR_SIZE
hex "Length of PPA ESBC header"
depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
default 0x2000
help
Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
NAND to memory to validate PPA image.
endmenu
config SYS_FSL_ERRATUM_A008997
bool "Workaround for USB PHY erratum A008997"
config SYS_FSL_ERRATUM_A009007
bool
help
Workaround for USB PHY erratum A009007
config SYS_FSL_ERRATUM_A009008
bool "Workaround for USB PHY erratum A009008"
config SYS_FSL_ERRATUM_A009798
bool "Workaround for USB PHY erratum A009798"
config SYS_FSL_ERRATUM_A050204
bool "Workaround for USB PHY erratum A050204"
help
USB3.0 Receiver needs to enable fixed equalization
for each of PHY instances in an SOC. This is similar
to erratum A-009007, but this one is for LX2160A and LX2162A,
and the register value is different.
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
config SYS_FSL_ERRATUM_A010539
bool "Workaround for PIN MUX erratum A010539"
config MAX_CPUS
int "Maximum number of CPUs permitted for Layerscape"
default 2 if ARCH_LS1028A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
default 16 if ARCH_LS2080A
default 8 if ARCH_LS1088A
default 16 if ARCH_LX2160A
default 16 if ARCH_LX2162A
default 1
help
Set this number to the maximum number of possible CPUs in the SoC.
SoCs may have multiple clusters with each cluster may have multiple
ports. If some ports are reserved but higher ports are used for
cores, count the reserved ports. This will allocate enough memory
in spin table to properly handle all cores.
config EMC2305
bool "Fan controller"
help
Enable the EMC2305 fan controller for configuration of fan
speed.
config NXP_ESBC
bool "NXP_ESBC"
help
Enable Freescale Secure Boot feature
config QSPI_AHB_INIT
bool "Init the QSPI AHB bus"
help
The default setting for QSPI AHB bus just support 3bytes addressing.
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
config FSPI_AHB_EN_4BYTE
bool "Enable 4-byte Fast Read command for AHB mode"
default n
help
The default setting for FlexSPI AHB bus just supports 3-byte addressing.
But some FlexSPI flash sizes are up to 64MBytes.
This flag enables fast read command for AHB mode and modifies required
LUT to support full FlexSPI flash.
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
default 0x3090000 if ARCH_LS1088A || ARCH_LS1028A
default 0x180000 if FSL_LSCH2
help
Offset for CCI400 base
CCI400 base addr = CCSRBAR + CCI400_OFFSET
config SYS_FSL_IFC_BANK_COUNT
int "Maximum banks of Integrated flash controller"
depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
default 4 if ARCH_LS1043A
default 4 if ARCH_LS1046A
default 8 if ARCH_LS2080A || ARCH_LS1088A
config SYS_FSL_HAS_CCI400
bool
config SYS_FSL_HAS_CCN504
bool
config SYS_FSL_HAS_CCN508
bool
config SYS_FSL_HAS_DP_DDR
bool
config SYS_FSL_SRDS_1
bool
config SYS_FSL_SRDS_2
bool
config SYS_NXP_SRDS_3
bool
config SYS_HAS_SERDES
bool
config FSL_TZASC_1
bool
config FSL_TZASC_2
bool
config FSL_TZASC_400
bool
config FSL_TZPC_BP147
bool
endmenu
menu "Layerscape clock tree configuration"
depends on FSL_LSCH2 || FSL_LSCH3
config SYS_FSL_CLK
bool "Enable clock tree initialization"
default y
config CLUSTER_CLK_FREQ
int "Reference clock of core cluster"
depends on ARCH_LS1012A
default 100000000
help
This number is the reference clock frequency of core PLL.
For most platforms, the core PLL and Platform PLL have the same
reference clock, but for some platforms, LS1012A for instance,
they are provided sepatately.
config SYS_FSL_PCLK_DIV
int "Platform clock divider"
default 1 if ARCH_LS1028A
default 1 if ARCH_LS1043A
default 1 if ARCH_LS1046A
default 1 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive Platform clock from
Platform PLL, in another word:
Platform_clk = Platform_PLL_freq / this_divider
config SYS_FSL_DSPI_CLK_DIV
int "DSPI clock divider"
default 1 if ARCH_LS1043A
default 2
help
This is the divider that is used to derive DSPI clock from Platform
clock, in another word DSPI_clk = Platform_clk / this_divider.
config SYS_FSL_DUART_CLK_DIV
int "DUART clock divider"
default 1 if ARCH_LS1043A
default 4 if ARCH_LX2160A
default 4 if ARCH_LX2162A
default 2
help
This is the divider that is used to derive DUART clock from Platform
clock, in another word DUART_clk = Platform_clk / this_divider.
config SYS_FSL_I2C_CLK_DIV
int "I2C clock divider"
default 1 if ARCH_LS1043A
default 4 if ARCH_LS1012A
default 4 if ARCH_LS1028A
default 8 if ARCH_LX2160A
default 8 if ARCH_LX2162A
default 8 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive I2C clock from Platform
clock, in another word I2C_clk = Platform_clk / this_divider.
config SYS_FSL_IFC_CLK_DIV
int "IFC clock divider"
default 1 if ARCH_LS1043A
default 4 if ARCH_LS1012A
default 4 if ARCH_LS1028A
default 8 if ARCH_LX2160A
default 8 if ARCH_LX2162A
default 8 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive IFC clock from Platform
clock, in another word IFC_clk = Platform_clk / this_divider.
config SYS_FSL_LPUART_CLK_DIV
int "LPUART clock divider"
default 1 if ARCH_LS1043A
default 2
help
This is the divider that is used to derive LPUART clock from Platform
clock, in another word LPUART_clk = Platform_clk / this_divider.
config SYS_FSL_SDHC_CLK_DIV
int "SDHC clock divider"
default 1 if ARCH_LS1043A
default 1 if ARCH_LS1012A
default 2
help
This is the divider that is used to derive SDHC clock from Platform
clock, in another word SDHC_clk = Platform_clk / this_divider.
config SYS_FSL_QMAN_CLK_DIV
int "QMAN clock divider"
default 1 if ARCH_LS1043A
default 2
help
This is the divider that is used to derive QMAN clock from Platform
clock, in another word QMAN_clk = Platform_clk / this_divider.
endmenu
config RESV_RAM
bool
help
Reserve memory from the top, tracked by gd->arch.resv_ram. This
reserved RAM can be used by special driver that resides in memory
after U-Boot exits. It's up to implementation to allocate and allow
access to this reserved memory. For example, the reserved RAM can
be at the high end of physical memory. The reserve RAM may be
excluded from memory bank(s) passed to OS, or marked as reserved.
config SYS_FSL_EC1
bool
help
Ethernet controller 1, this is connected to
MAC17 for LX2160A and LX2162A or to MAC3 for other SoCs
Provides DPAA2 capabilities
config SYS_FSL_EC2
bool
help
Ethernet controller 2, this is connected to
MAC18 for LX2160A and LX2162A or to MAC4 for other SoCs
Provides DPAA2 capabilities
config SYS_FSL_ERRATUM_A008336
bool
config SYS_FSL_ERRATUM_A008514
bool
config SYS_FSL_ERRATUM_A008585
bool
config SYS_FSL_ERRATUM_A008850
bool
config SYS_FSL_ERRATUM_A009203
bool
config SYS_FSL_ERRATUM_A009635
bool
config SYS_FSL_ERRATUM_A009660
bool
config SYS_FSL_ERRATUM_A050382
bool
config SYS_FSL_HAS_RGMII
bool
depends on SYS_FSL_EC1 || SYS_FSL_EC2
config SPL_LDSCRIPT
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
config HAS_FSL_XHCI_USB
bool
help
For some SoC (such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
pins, select it when the pins are assigned to USB.
config SYS_FSL_BOOTROM_BASE
hex
depends on FSL_LSCH2
default 0
config SYS_FSL_BOOTROM_SIZE
hex
depends on FSL_LSCH2
default 0x1000000