u-boot/arch/arm/dts/Makefile

470 lines
12 KiB
Makefile
Raw Normal View History

#
# SPDX-License-Identifier: GPL-2.0+
#
dtb-$(CONFIG_AT91FAMILY) += at91sam9260-smartweb.dtb \
at91sam9g20-taurus.dtb \
at91sam9g45-corvus.dtb \
at91sam9g45-gurnard.dtb
dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-universal_c210.dtb \
exynos4210-trats.dtb \
exynos4412-trats2.dtb \
exynos4412-odroid.dtb
dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-snow.dtb \
exynos5250-spring.dtb \
exynos5250-smdk5250.dtb \
exynos5420-smdk5420.dtb \
exynos5420-peach-pit.dtb \
exynos5800-peach-pi.dtb \
exynos5422-odroidxu3.dtb
dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-sdk.dtb \
rk3188-radxarock.dtb \
rk3288-evb.dtb \
rk3288-fennec.dtb \
rk3288-firefly.dtb \
rk3288-miqi.dtb \
rk3288-phycore-rdk.dtb \
rk3288-popmetal.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-vyasa.dtb \
rk3328-evb.dtb \
rk3368-lion.dtb \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
rk3368-px5-evb.dtb \
dts: rk3399-puma: add DTS for RK3399-Q7 (Puma) SoM The RK3399-Q7 is a system-on-module featuring the Rockchip RK3399 in a Qseven-compatible form-factor. These changes add a device-tree describing the board and its interfaces for basic functionality (e.g. GbE, SPI, eMMC, SD-card). This includes the following changes from the original development: * dts: rk3399-puma: include DTS for RK3399-Q7 SoM in the Makefile * dts: rk3399-puma: add gmac for the RK3399-Q7 This change enables the Gigabit Ethernet support on the RK3399-Q7. * dts: rk3399-puma: use serial0 for stdout * dts: rk3399-puma: prepare the sdmmc node for SPL booting * dts: rk3399-puma: enable spi1 and spi5, add /spi1/spiflash The RK3399-Q7 (Puma) unsually (this is a build-time option for customised boards) has an on-module SPI-flash connected to SPI1. As of today, this is a Winbond W25Q32DW (32MBit) device. The SPI5 controller is routed to the Q7 edge connector and provides general-purpose SPI connectivity for customer base-boards. With some minor improvements on integration into our outbound tree - explicitly modelled the SPI flash as 'spiflash' under spi0 [dts: rk3399-puma: explicitly model spi-flash under spi1] - renamed the aliases to spi0 and spi1 to allow easier use of commands and legacy (SPL) infrastructure... i.e. the controllers will be 0 and 1 for 'sf probe', 'sspi', etc. [dts: rk3399-puma: rename aliases to number spi as 0 and 1 for commands] * dts: rk3399-puma: include SPI in the spl-boot-order property Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-28 16:48:51 +00:00
rk3399-evb.dtb \
rk3399-firefly.dtb \
rk3399-puma-ddr1333.dtb \
rk3399-puma-ddr1600.dtb \
rk3399-puma-ddr1866.dtb \
rv1108-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
tegra20-seaboard.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-colibri.dtb \
tegra30-apalis.dtb \
tegra30-beaver.dtb \
tegra30-cardhu.dtb \
tegra30-colibri.dtb \
tegra30-tec-ng.dtb \
tegra114-dalmore.dtb \
tegra124-apalis.dtb \
tegra124-jetson-tk1.dtb \
tegra124-nyan-big.dtb \
tegra124-cei-tk1-som.dtb \
tegra124-venice2.dtb \
tegra186-p2771-0000-000.dtb \
tegra186-p2771-0000-500.dtb \
tegra210-e2220-1170.dtb \
tegra210-p2371-0000.dtb \
tegra210-p2371-2180.dtb \
tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_MVEBU) += \
armada-3720-db.dtb \
armada-3720-espressobin.dtb \
armada-375-db.dtb \
armada-388-clearfog.dtb \
armada-388-gp.dtb \
armada-385-amc.dtb \
armada-7040-db.dtb \
armada-7040-db-nand.dtb \
armada-8040-db.dtb \
armada-8040-mcbin.dtb \
armada-xp-gp.dtb \
mvebu: Support Synology DS414 This adds support for the MV78230 based DS414 NAS by Synology. The relevant bits have been extracted from the 'synogpl-5004-armadaxp' package Synology kindly published, garnished with a fair amount of trial-and-error. Sadly, support is far from perfect. The major parts I have failed in are SATA and XHCI support. Details about these and some other things follow: Device Tree ----------- The device tree file armada-xp-synology-ds414.dts has been copied from Linux and enhanced by recent U-Boot specific changes to armada-xp-gp.dts. SATA Support ------------ There is a Marvell 88SX7042 controller attached to PCIe which is supported by Linux's sata_mv driver but sadly not U-Boot's sata_mv. I'm not sure if extending the latter to support PCI devices is worth the effort at all. Porting sata_mv from Linux exceeded my brain's capacities. :( XHCI Support ------------ There is an EtronTech EJ168A XHCI controller attached to PCIe which drives the two rear USB3 ports. After a bit of playing around I managed to get it recognized by xhci-pci, but never was able to access any devices attached to it. Enabling it in ds414 board config shows that it does not respond to commands for whatever reason. The (somewhat) bright side to it is that it is not even supported in Synology's customized U-Boot, but that also means nowhere to steal the relevant bits from. EHCI Support ------------ This seems functional after issuing 'usb start'. At least it detects USB storage devices, and IIRC reading from them was OK. OTOH Linux fails to register the controller if 'usb start' wasn't given before in U-Boot. According to Synology sources, this board seems to support USB device (gadget?) mode. Though I didn't play around with it. PCIe Support ------------ This is fine, but trying to gate the clocks of unused lanes will hang PCI enum. In addition to that, pci_mvebu seems not to support DM_PCI. DDR3 Training ------------- Marvell/Synology uses eight PUPs instead of four. Does not look like this is meant to be customized in mainline U-Boot at all. OTOH I have no idea what a "PUP" actually is. PEX Init -------- Synology uses different values than mainline U-Boot with this patch: pex_max_unit_get returns 2, pex_max_if_get returns 7 and max_serdes_lines is set to 7. Not changing this seems to not have an impact, although I'm not entirely sure it does not cause issues I am not aware of. Static Environment ------------------ This allows to boot stock Synology firmware at least. In order to be a little more flexible when it comes to booting custom kernels, do not only load zImage partition, but also rd.gz into memory. This way it is possible to use about 7MB for kernel with piggyback initramfs. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-12-25 13:41:25 +00:00
armada-xp-maxbcm.dtb \
armada-xp-synology-ds414.dtb \
armada-xp-theadorable.dtb \
armada-38x-controlcenterdc.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
uniphier-ld11-global.dtb \
uniphier-ld11-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD20) += \
uniphier-ld20-global.dtb \
uniphier-ld20-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD4) += \
uniphier-ld4-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_LD6B) += \
uniphier-ld6b-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PRO4) += \
uniphier-pro4-ace.dtb \
uniphier-pro4-ref.dtb \
uniphier-pro4-sanji.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PRO5) += \
uniphier-pro5-4kbox.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PXS2) += \
uniphier-pxs2-gentil.dtb \
uniphier-pxs2-vodka.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_PXS3) += \
uniphier-pxs3-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
uniphier-sld8-ref.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc706.dtb \
zynq-zed.dtb \
zynq-zybo.dtb \
zynq-microzed.dtb \
zynq-picozed.dtb \
zynq-topic-miami.dtb \
zynq-topic-miamilite.dtb \
zynq-topic-miamiplus.dtb \
zynq-zturn-myir.dtb \
zynq-zc770-xm010.dtb \
zynq-zc770-xm011.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
zynqmp-ep108.dtb \
zynqmp-zcu102-revA.dtb \
zynqmp-zcu102-revB.dtb \
zynqmp-zc1751-xm015-dc1.dtb \
zynqmp-zc1751-xm016-dc2.dtb \
zynqmp-zc1751-xm018-dc4.dtb \
zynqmp-zc1751-xm019-dc5.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-bone.dtb \
am335x-draco.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-bonegreen.dtb \
am335x-icev2.dtb \
am335x-pxm50.dtb \
am335x-rut.dtb
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \
am43x-epos-evm.dtb \
am437x-idk-evm.dtb
dtb-$(CONFIG_TI816X) += dm8168-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_arria5_socdk.dtb \
socfpga_cyclone5_is1.dtb \
socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_de0_nano_soc.dtb \
socfpga_cyclone5_de1_soc.dtb \
socfpga_cyclone5_de10_nano.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_cyclone5_sr1500.dtb \
socfpga_cyclone5_vining_fpga.dtb
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
am57xx-beagle-x15-revc.dtb \
am572x-idk.dtb \
am571x-idk.dtb
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
2014-11-07 13:10:41 +00:00
dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
ls1021a-qds-lpuart.dtb \
ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
ls1021a-iot-duart.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2080a-rdb.dtb \
fsl-ls2081a-rdb.dtb \
fsl-ls2088a-rdb-qspi.dtb \
fsl-ls1088a-rdb.dtb \
fsl-ls1088a-qds.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
fsl-ls1046a-qds-duart.dtb \
fsl-ls1046a-qds-lpuart.dtb \
fsl-ls1046a-rdb.dtb \
fsl-ls1012a-qds.dtb \
fsl-ls1012a-rdb.dtb \
fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
stm32f769-disco.dtb
dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \
stm32h743i-eval.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-dserve-dsrv9703c.dtb \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet1.dtb \
sun4i-a10-inet-3f.dtb \
sun4i-a10-inet-3w.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-inet9f-rev03.dtb \
sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb \
sun4i-a10-pcduino2.dtb \
sun4i-a10-pov-protab2-ips9.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-ampe-a76.dtb \
sun5i-a13-difrnce-dit4350.dtb \
sun5i-a13-empire-electronix-d709.dtb \
sun5i-a13-empire-electronix-m712.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-86vs.dtb \
sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun5i-a13-q8-tablet.dtb \
sun5i-a13-utoo-p66.dtb \
sun5i-gr8-chip-pro.dtb \
sun5i-r8-chip.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
sun6i-a31s-inet-q972.dtb \
sun6i-a31s-primo81.dtb \
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-ainol-aw1.dtb \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapi-m1-plus.dtb \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-lamobo-r1.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-m5.dtb \
sun7i-a20-mk808c.dtb \
sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
sun7i-a20-primo73.dtb \
sun7i-a20-wexler-tab7200.dtb \
sun7i-a20-wits-pro-a20-dkt.dtb \
sun7i-a20-yones-toptech-bd1078.dtb
dtb-$(CONFIG_MACH_SUN8I_A23) += \
sun8i-a23-evb.dtb \
sun8i-a23-gt90h-v4.dtb \
sun8i-a23-inet86dz.dtb \
sun8i-a23-polaroid-mid2407pxe03.dtb \
sun8i-a23-polaroid-mid2809pxe04.dtb \
sun8i-a23-q8-tablet.dtb
dtb-$(CONFIG_MACH_SUN8I_A33) += \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-inet-d978-rev2.dtb \
sun8i-a33-olinuxino.dtb \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic-edition.dtb \
sun8i-r16-parrot.dtb
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb
dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-nanopi-m1-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-nanopi-neo-air.dtb
dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-bananapi-m2-ultra.dtb
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-nanopi-neo2.dtb \
sun50i-h5-orangepi-pc2.dtb \
sun50i-h5-orangepi-prime.dtb \
sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-bananapi-m64.dtb \
sun50i-a64-nanopi-a64.dtb \
sun50i-a64-olinuxino.dtb \
sun50i-a64-orangepi-win.dtb \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb \
sun9i-a80-cx-a99.dtb
dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
vf610-colibri.dtb \
vf610-twr.dtb \
pcm052.dtb \
bk4r1.dtb
dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
imx6sl-evk.dtb \
imx6sll-evk.dtb \
imx6dl-icore.dtb \
imx6dl-icore-rqs.dtb \
imx6q-cm-fx6.dtb \
imx6q-icore.dtb \
imx6q-icore-rqs.dtb \
imx6q-logicpd.dtb \
imx6sx-sabreauto.dtb \
imx6ul-geam-kit.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-mmc.dtb \
imx6ul-isiot-nand.dtb \
imx6ul-opos6uldev.dtb
dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
dtb-$(CONFIG_RCAR_GEN3) += \
r8a7795-h3ulcb.dtb \
r8a7795-salvator-x.dtb \
r8a7796-m3ulcb.dtb \
r8a7796-salvator-x.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \
keystone-k2g-evm.dtb \
keystone-k2g-generic.dtb \
keystone-k2g-ice.dtb
dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
dtb-$(CONFIG_TARGET_PM9263) += at91sam9263ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9263EK) += at91sam9263ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9RLEK) += at91sam9rlek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
at91sam9260ek.dtb \
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
dtb-$(CONFIG_TARGET_OMAP3_LOGIC) += \
logicpd-torpedo-37xx-devkit.dtb \
logicpd-som-lv-37xx-devkit.dtb
dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
at91-sama5d2_xplained.dtb
dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \
at91-sama5d27_som1_ek.dtb
dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
sama5d31ek.dtb \
sama5d33ek.dtb \
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
sama5d36ek_cmp.dtb
dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
at91-sama5d3_xplained.dtb
dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
at91-sama5d4ek.dtb
dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
at91-sama5d4_xplained.dtb
dtb-$(CONFIG_ARCH_BCM283X) += \
bcm2835-rpi-a-plus.dtb \
bcm2835-rpi-a.dtb \
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-b-rev2.dtb \
bcm2835-rpi-b.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
targets += $(dtb-y)
# Add any required device tree compiler flags here
DTC_FLAGS +=
PHONY += dtbs
dtbs: $(addprefix $(obj)/, $(dtb-y))
@:
clean-files := *.dtb