2011-10-14 02:58:26 +00:00
|
|
|
/*
|
|
|
|
* mux.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation version 2.
|
|
|
|
*
|
|
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
|
|
* kind, whether express or implied; without even the implied warranty
|
|
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
2012-07-31 17:50:01 +00:00
|
|
|
#include <common.h>
|
|
|
|
#include <asm/arch/sys_proto.h>
|
2011-10-14 02:58:26 +00:00
|
|
|
#include <asm/arch/hardware.h>
|
2012-10-18 01:21:11 +00:00
|
|
|
#include <asm/arch/mux.h>
|
2011-10-14 02:58:26 +00:00
|
|
|
#include <asm/io.h>
|
2012-08-08 16:03:07 +00:00
|
|
|
#include <i2c.h>
|
2016-02-24 18:30:55 +00:00
|
|
|
#include "../common/board_detect.h"
|
2012-10-18 01:21:09 +00:00
|
|
|
#include "board.h"
|
2011-10-14 02:58:26 +00:00
|
|
|
|
|
|
|
static struct module_pin_mux uart0_pin_mux[] = {
|
|
|
|
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
|
|
|
|
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-10-25 12:21:30 +00:00
|
|
|
static struct module_pin_mux uart1_pin_mux[] = {
|
|
|
|
{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */
|
|
|
|
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct module_pin_mux uart2_pin_mux[] = {
|
|
|
|
{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */
|
|
|
|
{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct module_pin_mux uart3_pin_mux[] = {
|
|
|
|
{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
|
|
|
|
{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct module_pin_mux uart4_pin_mux[] = {
|
|
|
|
{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */
|
|
|
|
{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct module_pin_mux uart5_pin_mux[] = {
|
|
|
|
{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */
|
|
|
|
{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-01-09 20:38:58 +00:00
|
|
|
static struct module_pin_mux mmc0_pin_mux[] = {
|
|
|
|
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
|
|
|
|
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
|
|
|
|
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
|
|
|
|
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
|
|
|
|
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
|
|
|
|
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
|
|
|
|
{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
|
2015-10-13 08:32:29 +00:00
|
|
|
{OFFSET(spi0_cs1), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* GPIO0_6 */
|
2012-01-09 20:38:58 +00:00
|
|
|
{-1},
|
|
|
|
};
|
2012-07-31 17:50:01 +00:00
|
|
|
|
2012-11-02 03:35:59 +00:00
|
|
|
static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
|
|
|
|
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
|
|
|
|
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
|
|
|
|
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
|
|
|
|
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
|
|
|
|
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
|
|
|
|
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
|
|
|
|
{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-07-31 17:50:01 +00:00
|
|
|
static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
|
|
|
|
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
|
|
|
|
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
|
|
|
|
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
|
|
|
|
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
|
|
|
|
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
|
|
|
|
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
|
|
|
|
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
|
|
|
|
{-1},
|
|
|
|
};
|
2012-01-09 20:38:58 +00:00
|
|
|
|
2012-08-08 17:32:09 +00:00
|
|
|
static struct module_pin_mux mmc1_pin_mux[] = {
|
|
|
|
{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */
|
|
|
|
{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */
|
|
|
|
{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */
|
|
|
|
{OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */
|
|
|
|
{OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */
|
|
|
|
{OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */
|
|
|
|
{OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */
|
|
|
|
{OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_CD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-01-22 23:47:01 +00:00
|
|
|
static struct module_pin_mux i2c0_pin_mux[] = {
|
|
|
|
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
|
|
|
|
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
|
|
|
|
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
|
|
|
|
PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-06-22 07:45:57 +00:00
|
|
|
static struct module_pin_mux i2c1_pin_mux[] = {
|
|
|
|
{OFFSET(spi0_d1), (MODE(2) | RXACTIVE |
|
|
|
|
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
|
|
|
|
{OFFSET(spi0_cs0), (MODE(2) | RXACTIVE |
|
|
|
|
PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-08-08 21:35:55 +00:00
|
|
|
static struct module_pin_mux spi0_pin_mux[] = {
|
|
|
|
{OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */
|
|
|
|
{OFFSET(spi0_d0), (MODE(0) | RXACTIVE |
|
|
|
|
PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */
|
|
|
|
{OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */
|
|
|
|
{OFFSET(spi0_cs0), (MODE(0) | RXACTIVE |
|
|
|
|
PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-07-31 15:55:01 +00:00
|
|
|
static struct module_pin_mux gpio0_7_pin_mux[] = {
|
|
|
|
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2016-05-16 06:17:23 +00:00
|
|
|
static struct module_pin_mux gpio0_18_pin_mux[] = {
|
|
|
|
{OFFSET(usb0_drvvbus), (MODE(7) | PULLUDEN)}, /* GPIO0_18 */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2012-07-24 12:22:18 +00:00
|
|
|
static struct module_pin_mux rgmii1_pin_mux[] = {
|
|
|
|
{OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
|
|
|
|
{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
|
|
|
|
{OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
|
|
|
|
{OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
|
|
|
|
{OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
|
|
|
|
{OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
|
|
|
|
{OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
|
|
|
|
{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
|
|
|
|
{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
|
|
|
|
{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
|
|
|
|
{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
|
|
|
|
{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
|
|
|
|
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
|
|
|
|
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct module_pin_mux mii1_pin_mux[] = {
|
|
|
|
{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */
|
|
|
|
{OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */
|
|
|
|
{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */
|
|
|
|
{OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */
|
|
|
|
{OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */
|
|
|
|
{OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */
|
|
|
|
{OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */
|
|
|
|
{OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */
|
|
|
|
{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */
|
|
|
|
{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */
|
|
|
|
{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */
|
|
|
|
{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */
|
|
|
|
{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */
|
|
|
|
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
|
|
|
|
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2016-05-16 06:17:23 +00:00
|
|
|
static struct module_pin_mux rmii1_pin_mux[] = {
|
|
|
|
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
|
|
|
|
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
|
|
|
|
{OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* MII1_CRS */
|
|
|
|
{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* MII1_RXERR */
|
|
|
|
{OFFSET(mii1_txen), MODE(1)}, /* MII1_TXEN */
|
|
|
|
{OFFSET(mii1_txd1), MODE(1)}, /* MII1_TXD1 */
|
|
|
|
{OFFSET(mii1_txd0), MODE(1)}, /* MII1_TXD0 */
|
|
|
|
{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* MII1_RXD1 */
|
|
|
|
{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* MII1_RXD0 */
|
|
|
|
{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#ifdef CONFIG_NAND
|
2012-11-06 13:06:29 +00:00
|
|
|
static struct module_pin_mux nand_pin_mux[] = {
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
{OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
|
|
|
|
{OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
|
|
|
|
{OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */
|
|
|
|
{OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */
|
|
|
|
{OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */
|
|
|
|
{OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */
|
|
|
|
{OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */
|
|
|
|
{OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */
|
|
|
|
#ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
|
|
|
|
{OFFSET(gpmc_ad8), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8 */
|
|
|
|
{OFFSET(gpmc_ad9), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9 */
|
|
|
|
{OFFSET(gpmc_ad10), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */
|
|
|
|
{OFFSET(gpmc_ad11), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */
|
|
|
|
{OFFSET(gpmc_ad12), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */
|
|
|
|
{OFFSET(gpmc_ad13), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */
|
|
|
|
{OFFSET(gpmc_ad14), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */
|
|
|
|
{OFFSET(gpmc_ad15), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */
|
|
|
|
#endif
|
|
|
|
{OFFSET(gpmc_wait0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* nWAIT */
|
|
|
|
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN)}, /* nWP */
|
|
|
|
{OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* nCS */
|
|
|
|
{OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, /* WEN */
|
|
|
|
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, /* OE */
|
|
|
|
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, /* ADV_ALE */
|
|
|
|
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, /* BE_CLE */
|
2012-11-06 13:06:29 +00:00
|
|
|
{-1},
|
|
|
|
};
|
2014-07-22 10:33:21 +00:00
|
|
|
#elif defined(CONFIG_NOR)
|
2013-07-18 19:13:03 +00:00
|
|
|
static struct module_pin_mux bone_norcape_pin_mux[] = {
|
2014-07-22 10:33:21 +00:00
|
|
|
{OFFSET(gpmc_a0), MODE(0) | PULLUDDIS}, /* NOR_A0 */
|
|
|
|
{OFFSET(gpmc_a1), MODE(0) | PULLUDDIS}, /* NOR_A1 */
|
|
|
|
{OFFSET(gpmc_a2), MODE(0) | PULLUDDIS}, /* NOR_A2 */
|
|
|
|
{OFFSET(gpmc_a3), MODE(0) | PULLUDDIS}, /* NOR_A3 */
|
|
|
|
{OFFSET(gpmc_a4), MODE(0) | PULLUDDIS}, /* NOR_A4 */
|
|
|
|
{OFFSET(gpmc_a5), MODE(0) | PULLUDDIS}, /* NOR_A5 */
|
|
|
|
{OFFSET(gpmc_a6), MODE(0) | PULLUDDIS}, /* NOR_A6 */
|
|
|
|
{OFFSET(gpmc_a7), MODE(0) | PULLUDDIS}, /* NOR_A7 */
|
|
|
|
{OFFSET(gpmc_ad0), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD0 */
|
|
|
|
{OFFSET(gpmc_ad1), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD1 */
|
|
|
|
{OFFSET(gpmc_ad2), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD2 */
|
|
|
|
{OFFSET(gpmc_ad3), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD3 */
|
|
|
|
{OFFSET(gpmc_ad4), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD4 */
|
|
|
|
{OFFSET(gpmc_ad5), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD5 */
|
|
|
|
{OFFSET(gpmc_ad6), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD6 */
|
|
|
|
{OFFSET(gpmc_ad7), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD7 */
|
|
|
|
{OFFSET(gpmc_ad8), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD8 */
|
|
|
|
{OFFSET(gpmc_ad9), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD9 */
|
|
|
|
{OFFSET(gpmc_ad10), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD10 */
|
|
|
|
{OFFSET(gpmc_ad11), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD11 */
|
|
|
|
{OFFSET(gpmc_ad12), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD12 */
|
|
|
|
{OFFSET(gpmc_ad13), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD13 */
|
|
|
|
{OFFSET(gpmc_ad14), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD14 */
|
|
|
|
{OFFSET(gpmc_ad15), MODE(0) | PULLUDDIS | RXACTIVE}, /* NOR_AD15 */
|
|
|
|
{OFFSET(gpmc_csn0), MODE(0) | PULLUDEN | PULLUP_EN}, /* CE */
|
|
|
|
{OFFSET(gpmc_advn_ale), MODE(0) | PULLUDEN | PULLDOWN_EN}, /* ALE */
|
|
|
|
{OFFSET(gpmc_oen_ren), MODE(0) | PULLUDEN | PULLDOWN_EN},/* OEn_REN */
|
|
|
|
{OFFSET(gpmc_be0n_cle), MODE(0) | PULLUDEN | PULLDOWN_EN},/* unused */
|
|
|
|
{OFFSET(gpmc_wen), MODE(0) | PULLUDEN | PULLDOWN_EN}, /* WEN */
|
|
|
|
{OFFSET(gpmc_wait0), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE},/*WAIT*/
|
2013-07-18 19:13:03 +00:00
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
2016-05-16 06:17:23 +00:00
|
|
|
static struct module_pin_mux uart3_icev2_pin_mux[] = {
|
|
|
|
{OFFSET(mii1_rxd3), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
|
|
|
|
{OFFSET(mii1_rxd2), MODE(1) | PULLUDEN}, /* UART3_TXD */
|
|
|
|
{-1},
|
|
|
|
};
|
|
|
|
|
2013-07-30 05:18:54 +00:00
|
|
|
#if defined(CONFIG_NOR_BOOT)
|
|
|
|
void enable_norboot_pin_mux(void)
|
|
|
|
{
|
2014-07-22 10:33:21 +00:00
|
|
|
configure_module_pin_mux(bone_norcape_pin_mux);
|
2013-07-30 05:18:54 +00:00
|
|
|
}
|
|
|
|
#endif
|
2013-07-18 19:13:03 +00:00
|
|
|
|
2011-10-14 02:58:26 +00:00
|
|
|
void enable_uart0_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(uart0_pin_mux);
|
|
|
|
}
|
2012-01-09 20:38:58 +00:00
|
|
|
|
2012-10-25 12:21:30 +00:00
|
|
|
void enable_uart1_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(uart1_pin_mux);
|
|
|
|
}
|
|
|
|
|
|
|
|
void enable_uart2_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(uart2_pin_mux);
|
|
|
|
}
|
|
|
|
|
|
|
|
void enable_uart3_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(uart3_pin_mux);
|
|
|
|
}
|
|
|
|
|
|
|
|
void enable_uart4_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(uart4_pin_mux);
|
|
|
|
}
|
|
|
|
|
|
|
|
void enable_uart5_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(uart5_pin_mux);
|
|
|
|
}
|
2012-01-22 23:47:01 +00:00
|
|
|
|
|
|
|
void enable_i2c0_pin_mux(void)
|
|
|
|
{
|
|
|
|
configure_module_pin_mux(i2c0_pin_mux);
|
|
|
|
}
|
2012-06-22 07:45:57 +00:00
|
|
|
|
2012-08-08 16:03:07 +00:00
|
|
|
/*
|
|
|
|
* The AM335x GP EVM, if daughter card(s) are connected, can have 8
|
|
|
|
* different profiles. These profiles determine what peripherals are
|
|
|
|
* valid and need pinmux to be configured.
|
|
|
|
*/
|
|
|
|
#define PROFILE_NONE 0x0
|
|
|
|
#define PROFILE_0 (1 << 0)
|
|
|
|
#define PROFILE_1 (1 << 1)
|
|
|
|
#define PROFILE_2 (1 << 2)
|
|
|
|
#define PROFILE_3 (1 << 3)
|
|
|
|
#define PROFILE_4 (1 << 4)
|
|
|
|
#define PROFILE_5 (1 << 5)
|
|
|
|
#define PROFILE_6 (1 << 6)
|
|
|
|
#define PROFILE_7 (1 << 7)
|
|
|
|
#define PROFILE_MASK 0x7
|
|
|
|
#define PROFILE_ALL 0xFF
|
|
|
|
|
|
|
|
/* CPLD registers */
|
|
|
|
#define I2C_CPLD_ADDR 0x35
|
|
|
|
#define CFG_REG 0x10
|
|
|
|
|
|
|
|
static unsigned short detect_daughter_board_profile(void)
|
2012-06-22 07:45:57 +00:00
|
|
|
{
|
2012-08-08 16:03:07 +00:00
|
|
|
unsigned short val;
|
|
|
|
|
|
|
|
if (i2c_probe(I2C_CPLD_ADDR))
|
|
|
|
return PROFILE_NONE;
|
2012-07-24 12:22:18 +00:00
|
|
|
|
2012-08-08 16:03:07 +00:00
|
|
|
if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2))
|
|
|
|
return PROFILE_NONE;
|
|
|
|
|
|
|
|
return (1 << (val & PROFILE_MASK));
|
|
|
|
}
|
|
|
|
|
2016-02-24 18:30:55 +00:00
|
|
|
void enable_board_pin_mux(void)
|
2012-08-08 16:03:07 +00:00
|
|
|
{
|
|
|
|
/* Do board-specific muxes. */
|
2016-02-24 18:30:55 +00:00
|
|
|
if (board_is_bone()) {
|
2012-07-31 17:50:01 +00:00
|
|
|
/* Beaglebone pinmux */
|
|
|
|
configure_module_pin_mux(mii1_pin_mux);
|
|
|
|
configure_module_pin_mux(mmc0_pin_mux);
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#if defined(CONFIG_NAND)
|
|
|
|
configure_module_pin_mux(nand_pin_mux);
|
2014-07-22 10:33:21 +00:00
|
|
|
#elif defined(CONFIG_NOR)
|
2013-07-18 19:13:03 +00:00
|
|
|
configure_module_pin_mux(bone_norcape_pin_mux);
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#else
|
|
|
|
configure_module_pin_mux(mmc1_pin_mux);
|
2013-07-18 19:13:03 +00:00
|
|
|
#endif
|
2016-02-24 18:30:55 +00:00
|
|
|
} else if (board_is_gp_evm()) {
|
2012-07-31 17:50:01 +00:00
|
|
|
/* General Purpose EVM */
|
2012-08-08 16:03:07 +00:00
|
|
|
unsigned short profile = detect_daughter_board_profile();
|
2012-07-31 17:50:01 +00:00
|
|
|
configure_module_pin_mux(rgmii1_pin_mux);
|
|
|
|
configure_module_pin_mux(mmc0_pin_mux);
|
2012-08-08 16:03:07 +00:00
|
|
|
/* In profile #2 i2c1 and spi0 conflict. */
|
|
|
|
if (profile & ~PROFILE_2)
|
|
|
|
configure_module_pin_mux(i2c1_pin_mux);
|
2012-11-06 13:06:29 +00:00
|
|
|
/* Profiles 2 & 3 don't have NAND */
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#ifdef CONFIG_NAND
|
2012-11-06 13:06:29 +00:00
|
|
|
if (profile & ~(PROFILE_2 | PROFILE_3))
|
|
|
|
configure_module_pin_mux(nand_pin_mux);
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#endif
|
2012-08-08 17:32:09 +00:00
|
|
|
else if (profile == PROFILE_2) {
|
|
|
|
configure_module_pin_mux(mmc1_pin_mux);
|
2012-08-08 21:35:55 +00:00
|
|
|
configure_module_pin_mux(spi0_pin_mux);
|
2012-08-08 17:32:09 +00:00
|
|
|
}
|
2016-02-24 18:30:55 +00:00
|
|
|
} else if (board_is_idk()) {
|
2014-08-01 13:53:24 +00:00
|
|
|
/* Industrial Motor Control (IDK) */
|
2012-11-02 03:35:59 +00:00
|
|
|
configure_module_pin_mux(mii1_pin_mux);
|
|
|
|
configure_module_pin_mux(mmc0_no_cd_pin_mux);
|
2016-02-24 18:30:55 +00:00
|
|
|
} else if (board_is_evm_sk()) {
|
2012-07-31 17:50:01 +00:00
|
|
|
/* Starter Kit EVM */
|
2012-08-08 16:03:07 +00:00
|
|
|
configure_module_pin_mux(i2c1_pin_mux);
|
2012-07-31 17:50:01 +00:00
|
|
|
configure_module_pin_mux(gpio0_7_pin_mux);
|
|
|
|
configure_module_pin_mux(rgmii1_pin_mux);
|
|
|
|
configure_module_pin_mux(mmc0_pin_mux_sk_evm);
|
2016-02-24 18:30:55 +00:00
|
|
|
} else if (board_is_bone_lt()) {
|
2018-07-18 08:13:59 +00:00
|
|
|
if (board_is_bben()) {
|
|
|
|
/* SanCloud Beaglebone LT Enhanced pinmux */
|
|
|
|
configure_module_pin_mux(rgmii1_pin_mux);
|
|
|
|
} else {
|
|
|
|
/* Beaglebone LT pinmux */
|
|
|
|
configure_module_pin_mux(mii1_pin_mux);
|
|
|
|
}
|
2012-10-23 01:56:40 +00:00
|
|
|
/* Beaglebone LT pinmux */
|
|
|
|
configure_module_pin_mux(mii1_pin_mux);
|
|
|
|
configure_module_pin_mux(mmc0_pin_mux);
|
2014-10-08 21:10:27 +00:00
|
|
|
#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
configure_module_pin_mux(nand_pin_mux);
|
2014-10-08 21:10:27 +00:00
|
|
|
#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
|
2014-07-22 10:33:21 +00:00
|
|
|
configure_module_pin_mux(bone_norcape_pin_mux);
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#else
|
2012-10-23 01:56:40 +00:00
|
|
|
configure_module_pin_mux(mmc1_pin_mux);
|
board/ti/am335x: add support for beaglebone NAND cape
Beaglebone Board can be connected to expansion boards to add devices to them.
These expansion boards are called 'capes'. This patch adds support for
following versions of Beaglebone(AM335x) NAND capes
(a) NAND Device with bus-width=16, block-size=128k, page-size=2k, oob-size=64
(b) NAND Device with bus-width=16, block-size=256k, page-size=4k, oob-size=224
Further information and datasheets can be found at [1] and [2]
* How to boot from NAND using Memory Expander + NAND Cape ? *
- Important: As BOOTSEL values are sampled only at POR, so after changing any
setting on SW2 (DIP switch), disconnect and reconnect all board power supply
(including mini-USB console port) to POR the beaglebone.
- Selection of ECC scheme
for NAND cape(a), ROM code expects BCH8_HW ecc-scheme
for NAND cape(b), ROM code expects BCH16_HW ecc-scheme
- Selction of boot modes can be controlled via DIP switch(SW2) present on
Memory Expander cape.
SW2[SWITCH_BOOT] == OFF follow default boot order MMC-> SPI -> UART -> USB
SW2[SWITCH_BOOT] == ON boot mode selected via DIP switch(SW2)
So to flash NAND, first boot via MMC or other sources and then switch to
SW2[SWITCH_BOOT]=ON to boot from NAND Cape.
- For NAND boot following switch settings need to be followed
SW2[ 1] = OFF (SYSBOOT[ 0]==1: NAND boot mode selected )
SW2[ 2] = OFF (SYSBOOT[ 1]==1: -- do -- )
SW2[ 3] = ON (SYSBOOT[ 2]==0: -- do -- )
SW2[ 4] = ON (SYSBOOT[ 3]==0: -- do -- )
SW2[ 5] = OFF (SYSBOOT[ 4]==1: -- do -- )
SW2[ 6] = OFF (SYSBOOT[ 8]==1: 0:x8 device, 1:x16 device )
SW2[ 7] = ON (SYSBOOT[ 9]==0: ECC done by ROM )
SW2[ 8] = ON (SYSBOOT[10]==0: Non Muxed device )
SW2[ 9] = ON (SYSBOOT[11]==0: -- do -- )
[1] http://beagleboardtoys.info/index.php?title=BeagleBone_Memory_Expansion
[2] http://beagleboardtoys.info/index.php?title=BeagleBone_4Gb_16-Bit_NAND_Module
*IMPORTANT NOTE*
As Beaglebone board shares the same config as AM335x EVM, so following
changes are required in addition to this patch for Beaglebone NAND cape.
(1) Enable NAND in am335x_beaglebone board profile
(2) Add CONFIG_SYS_NAND_BUSWIDTH_16BIT to board config because:
- AM335x EVM has NAND device with datawidth=8, whereas
- Beaglebone NAND cape has NAND device with data-width=16
2014-07-22 10:33:20 +00:00
|
|
|
#endif
|
2018-03-07 10:40:41 +00:00
|
|
|
} else if (board_is_pb()) {
|
|
|
|
configure_module_pin_mux(mii1_pin_mux);
|
|
|
|
configure_module_pin_mux(mmc0_pin_mux);
|
2016-05-16 06:17:23 +00:00
|
|
|
} else if (board_is_icev2()) {
|
|
|
|
configure_module_pin_mux(mmc0_pin_mux);
|
|
|
|
configure_module_pin_mux(gpio0_18_pin_mux);
|
|
|
|
configure_module_pin_mux(uart3_icev2_pin_mux);
|
|
|
|
configure_module_pin_mux(rmii1_pin_mux);
|
|
|
|
configure_module_pin_mux(spi0_pin_mux);
|
2012-07-31 17:50:01 +00:00
|
|
|
} else {
|
2016-11-09 04:48:44 +00:00
|
|
|
/* Unknown board. We might still be able to boot. */
|
|
|
|
puts("Bad EEPROM or unknown board, cannot configure pinmux.");
|
2012-07-31 17:50:01 +00:00
|
|
|
}
|
2012-07-31 15:55:01 +00:00
|
|
|
}
|