Add support for BeagleBoard.org PocketBeagle

Texas Instruments AM3358 based low-cost board using Octavo Systems OSD3358 SIP
with built-in TPS65217 PMIC and 512MB DDR3. Board features small 35mm x
55mm size, high-speed USB OTG, microSD and 72 0.1" expansion header
pins with 2xSPI, 2xI2C, 2xUART, USB, 8xADC, up-to-44 GPIO, PRU pins and much more.

https://beagleboard.org/pocket

This was tested using the am335x_evm_usbspl_defconfig.

Note that MII pins are enabled despite not having Ethernet on this
board. This avoids an issue where otherwise many timeout errors would be
generated. See https://e2e.ti.com/support/arm/sitara_arm/f/791/t/298976
for some related discussion.

Signed-off-by: Jason Kridner <jdk@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Jason Kridner 2018-03-07 05:40:41 -05:00 committed by Tom Rini
parent 3bf5f13c0c
commit eff0c977b3
4 changed files with 17 additions and 5 deletions

View file

@ -264,7 +264,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
if (board_is_evm_sk())
return &dpll_ddr3_303MHz[ind];
else if (board_is_bone_lt() || board_is_icev2())
else if (board_is_pb() || board_is_bone_lt() || board_is_icev2())
return &dpll_ddr3_400MHz[ind];
else if (board_is_evm_15_or_later())
return &dpll_ddr3_303MHz[ind];
@ -295,7 +295,7 @@ const struct dpll_params *get_dpll_mpu_params(void)
if (bone_not_connected_to_ac_power())
freq = MPUPLL_M_600;
if (board_is_bone_lt())
if (board_is_pb() || board_is_bone_lt())
freq = MPUPLL_M_1000;
switch (freq) {
@ -341,7 +341,7 @@ static void scale_vcores_bone(int freq)
* Override what we have detected since we know if we have
* a Beaglebone Black it supports 1GHz.
*/
if (board_is_bone_lt())
if (board_is_pb() || board_is_bone_lt())
freq = MPUPLL_M_1000;
switch (freq) {
@ -542,7 +542,7 @@ void sdram_init(void)
if (board_is_evm_sk())
config_ddr(303, &ioregs_evmsk, &ddr3_data,
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
else if (board_is_bone_lt())
else if (board_is_pb() || board_is_bone_lt())
config_ddr(400, &ioregs_bonelt,
&ddr3_beagleblack_data,
&ddr3_beagleblack_cmd_ctrl_data,
@ -941,6 +941,8 @@ int board_fit_config_name_match(const char *name)
return 0;
else if (board_is_bone_lt() && !strcmp(name, "am335x-boneblack"))
return 0;
else if (board_is_pb() && !strcmp(name, "am335x-pocketbeagle"))
return 0;
else if (board_is_evm_sk() && !strcmp(name, "am335x-evmsk"))
return 0;
else if (board_is_bbg1() && !strcmp(name, "am335x-bonegreen"))

View file

@ -34,6 +34,11 @@ static inline int board_is_bone_lt(void)
return board_ti_is("A335BNLT");
}
static inline int board_is_pb(void)
{
return board_ti_is("A335PBGL");
}
static inline int board_is_bbg1(void)
{
return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BBG1", 4);
@ -41,7 +46,7 @@ static inline int board_is_bbg1(void)
static inline int board_is_beaglebonex(void)
{
return board_is_bone() || board_is_bone_lt() || board_is_bbg1();
return board_is_pb() || board_is_bone() || board_is_bone_lt() || board_is_bbg1();
}
static inline int board_is_evm_sk(void)

View file

@ -390,6 +390,9 @@ void enable_board_pin_mux(void)
#else
configure_module_pin_mux(mmc1_pin_mux);
#endif
} else if (board_is_pb()) {
configure_module_pin_mux(mii1_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
} else if (board_is_icev2()) {
configure_module_pin_mux(mmc0_pin_mux);
configure_module_pin_mux(gpio0_18_pin_mux);

View file

@ -133,6 +133,8 @@
"setenv fdtfile am335x-bone.dtb; fi; " \
"if test $board_name = A335BNLT; then " \
"setenv fdtfile am335x-boneblack.dtb; fi; " \
"if test $board_name = A335PBGL; then " \
"setenv fdtfile am335x-pocketbeagle.dtb; fi; " \
"if test $board_name = BBBW; then " \
"setenv fdtfile am335x-boneblack-wireless.dtb; fi; " \
"if test $board_name = BBG1; then " \