Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 23:47:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/spl/Kconfig

1633 lines
56 KiB
Text
Raw Normal View History

Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
menu "SPL / TPL"
Kconfig: Move SPL settings into their own file Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:22 +00:00
config SUPPORT_SPL
bool
config SUPPORT_TPL
bool
common: dfu: ignore reset for spl-dfu The SPL-DFU feature enable to load and execute u-boot from RAM over usb from PC using dfu-util. Hence dfu-reset should not be issued when dfu-util -R switch is issued. Signed-off-by: Ravi Babu <ravibabu@ti.com>
2017-05-04 10:15:29 +00:00
config SPL_DFU_NO_RESET
bool
Kconfig: Move SPL settings into their own file Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:22 +00:00
config SPL
bool
depends on SUPPORT_SPL
prompt "Enable SPL"
help
If you want to build SPL as well as the normal image, say Y.
configs: Migrate CONFIG_SPL_FRAMEWORK Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 17:15:38 +00:00
config SPL_FRAMEWORK
bool "Support SPL based upon the common SPL framework"
depends on SPL
default y
help
Enable the SPL framework under common/spl/. This framework
supports MMC, NAND and YMODEM and other methods loading of U-Boot
and the Linux Kernel. If unsure, say Y.
spl: add a generic function board_init_f This commit add a generic function board_init_f that only initialize some device (for example serial). It avoid to define a board function only to launch the serial configuration. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-09-19 14:18:39 +00:00
config SPL_FRAMEWORK_BOARD_INIT_F
bool "Define a generic function board_init_f"
depends on SPL_FRAMEWORK
help
Define a generic function board_init_f that:
- initialize the spl (spl_early_init)
- initialize the serial (preloader_console_init)
Unless you want to provide your own board_init_f, you should say Y.
spl: add overall SPL size check This adds a size check for SPL that can dynamically check generated SPL binaries (including devicetree) for a size limit that ensures this image plus global data, heap and stack fit in initial SRAM. Since some of these sizes are not available to make, a new host tool 'spl_size_limit' is added that dumps the resulting maximum size for an SPL binary to stdout. This tool is used in toplevel Makefile to implement the size check on SPL binaries. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-24 20:07:04 +00:00
config SPL_SIZE_LIMIT
spl: Convert CONFIG_SPL_SIZE_LIMIT to hex This is currently a decimal value which is not as convenient or meaningful. Also U-Boot tends to use hex everywhere. Convert this option to hex and add a comment for the size_check macro. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct the typo in the commit title] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:28 +00:00
hex "Maximum size of SPL image"
spl: add overall SPL size check This adds a size check for SPL that can dynamically check generated SPL binaries (including devicetree) for a size limit that ensures this image plus global data, heap and stack fit in initial SRAM. Since some of these sizes are not available to make, a new host tool 'spl_size_limit' is added that dumps the resulting maximum size for an SPL binary to stdout. This tool is used in toplevel Makefile to implement the size check on SPL binaries. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-24 20:07:04 +00:00
depends on SPL
Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but there are still places that reference integer values. Change those to hex as well. Also, update the Makefile to check for 0x0 instead of 0. This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT is set by menuconfig to 0x0: ... spl/u-boot-spl.bin exceeds file size limit: limit: 0 bytes actual: 0x80f0 bytes excess: 0x80f0 bytes Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-25 18:12:56 +00:00
default 0x11000 if ARCH_MX6 && !MX6_OCRAM_256KB
default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB
default 0x0
spl: add overall SPL size check This adds a size check for SPL that can dynamically check generated SPL binaries (including devicetree) for a size limit that ensures this image plus global data, heap and stack fit in initial SRAM. Since some of these sizes are not available to make, a new host tool 'spl_size_limit' is added that dumps the resulting maximum size for an SPL binary to stdout. This tool is used in toplevel Makefile to implement the size check on SPL binaries. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-24 20:07:04 +00:00
help
Specifies the maximum length of the U-Boot SPL image.
If this value is zero, it is ignored.
config SPL_SIZE_LIMIT_SUBTRACT_GD
bool "SPL image size check: provide space for global data"
depends on SPL_SIZE_LIMIT > 0
help
If enabled, aligned size of global data is reserved in
SPL_SIZE_LIMIT check to ensure such an image does not overflow SRAM
if SPL_SIZE_LIMIT describes the size of SRAM available for SPL when
pre-reloc global data is put into this SRAM, too.
config SPL_SIZE_LIMIT_SUBTRACT_MALLOC
bool "SPL image size check: provide space for malloc() pool before relocation"
depends on SPL_SIZE_LIMIT > 0
help
If enabled, SPL_SYS_MALLOC_F_LEN is reserved in SPL_SIZE_LIMIT check
to ensure such an image does not overflow SRAM if SPL_SIZE_LIMIT
describes the size of SRAM available for SPL when pre-reloc malloc
pool is put into this SRAM, too.
config SPL_SIZE_LIMIT_PROVIDE_STACK
hex "SPL image size check: provide stack space before relocation"
depends on SPL_SIZE_LIMIT > 0
default 0
help
If set, this size is reserved in SPL_SIZE_LIMIT check to ensure such
an image does not overflow SRAM if SPL_SIZE_LIMIT describes the size
of SRAM available for SPL when the stack required before reolcation
uses this SRAM, too.
spl: implement stack usage check This implements a stack usage check in SPL. Many boards start up SPL to run code + data from one common, rather small SRAM. To implement a sophisticated SPL binary size limit on such boards, the stack size (as well as malloc size and global data size) must be subtracted from this SRAM size. However, to do that properly, the stack size first needs to be known. This patch adds a new Kconfig option: - SPL_SYS_REPORT_STACK_F_USAGE: memset(0xaa) the whole area of the stack very early and check stack usage based on this constant later before the stack is switched to DRAM Initializing the stack and checking it is implemented in weak functions, in case a board does not use the stack as saved in gd->start_addr_sp. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-16 20:30:36 +00:00
config SPL_SYS_STACK_F_CHECK_BYTE
hex
default 0xaa
help
Constant used to check the stack
config SPL_SYS_REPORT_STACK_F_USAGE
depends on SPL_SIZE_LIMIT_PROVIDE_STACK != 0
bool "Check and report stack usage in SPL before relocation"
help
If this option is enabled, the initial SPL stack is filled with 0xaa
very early, up to the size configured with
SPL_SIZE_LIMIT_PROVIDE_STACK.
Later when SPL is done using this initial stack and switches to a
stack in DRAM, the actually used size of this initial stack is
reported by examining the memory and searching for the lowest
occurrence of non 0xaa bytes.
This default implementation works for stacks growing down only.
spl: Provide more information on boot failure If SPL fails to boot, try to provide an error code to indicate what is wrong. For example, if a uclass is missing, this can return -EPFNOSUPPORT (-96) which provides useful information. Add a helper for accessing the image-loader name so we can drop the use of #ifdefs in this code. Put this feature behind a CONFIG_SHOW_ERRORS option to avoid increasing the code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-05 22:32:57 +00:00
config SPL_SHOW_ERRORS
bool "Show more information when something goes wrong"
help
This enabled more verbose error messages and checking when something
goes wrong in SPL. For example, it shows the error code when U-Boot
cannot be located. This can help to diagnose the problem and figure
out a fix, particularly during development.
This adds a small amount to SPL code size, perhaps 100 bytes.
spl: Allow disabling binman symbols in SPL When CONFIG_SPL_FIT is enabled we do not access U-Boot directly in the image, since it is embedded in a FIT which is parsed at runtime. Provide a CONFIG option to drop the symbols in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-08 18:49:48 +00:00
config SPL_BINMAN_SYMBOLS
bool "Declare binman symbols in SPL"
depends on SPL_FRAMEWORK && BINMAN
default y
help
This enables use of symbols in SPL which refer to U-Boot, enabling SPL
to obtain the location of U-Boot simply by calling spl_get_image_pos()
and spl_get_image_size().
For this to work, you must have a U-Boot image in the binman image, so
binman can update SPL with the location of it.
configs: Enable SPL_FSL_PBL for some LayerScape platforms In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on these platforms too. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-04 06:21:55 +00:00
menu "PowerPC and LayerScape SPL Boot options"
configs: Migrate the various SPL_BOOT_xxx choices for PowerPC The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-01 18:20:25 +00:00
config SPL_NAND_BOOT
bool "Load SPL from NAND flash"
configs: Enable SPL_FSL_PBL for some LayerScape platforms In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on these platforms too. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-04 06:21:55 +00:00
depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
configs: Migrate the various SPL_BOOT_xxx choices for PowerPC The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-01 18:20:25 +00:00
config SPL_MMC_BOOT
bool "Load SPL from SD Card / eMMC"
configs: Enable SPL_FSL_PBL for some LayerScape platforms In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on these platforms too. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-04 06:21:55 +00:00
depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
configs: Migrate the various SPL_BOOT_xxx choices for PowerPC The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-01 18:20:25 +00:00
config SPL_SPI_BOOT
bool "Load SPL from SPI flash"
configs: Enable SPL_FSL_PBL for some LayerScape platforms In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on these platforms too. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-04 06:21:55 +00:00
depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
configs: Migrate the various SPL_BOOT_xxx choices for PowerPC The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-01 18:20:25 +00:00
config SPL_FSL_PBL
bool "Create SPL in Freescale PBI format"
configs: Enable SPL_FSL_PBL for some LayerScape platforms In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on these platforms too. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-04 06:21:55 +00:00
depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \
SUPPORT_SPL
configs: Migrate the various SPL_BOOT_xxx choices for PowerPC The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-01 18:20:25 +00:00
help
Create boot binary having SPL binary in PBI format concatenated with
u-boot binary.
endmenu
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:44:09 +00:00
config HANDOFF
bool "Pass hand-off information from SPL to U-Boot proper"
spl: Kconfig: Add SPL dependency to CONFIG_HANDOFF CONFIG_HANDOFF is used in u-boot proper to locate handoff info from SPL during pre-relocation init (in setup_spl_handoff). Add explicit dependency on CONFIG_SPL, to fix the following build error when CONFIG_HANDOFF && !CONFIG_SPL: common/board_f.c: In function ‘setup_spl_handoff’: common/board_f.c:283:4: error: ‘gd_t {aka struct global_data}’ has no member named ‘spl_handoff’ gd->spl_handoff = bloblist_find(BLOBLISTT_SPL_HANDOFF, ^~ Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-28 08:43:19 +00:00
depends on SPL && BLOBLIST
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:44:09 +00:00
help
It is useful to be able to pass information from SPL to U-Boot
proper to preserve state that is known in SPL and is needed in U-Boot.
Enable this to locate the handoff information in U-Boot proper, early
in boot. It is available in gd->handoff. The state state is set up
in SPL (or TPL if that is being used).
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
if SPL
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:44:09 +00:00
config SPL_HANDOFF
bool "Pass hand-off information from SPL to U-Boot proper"
spl: handoff: Correct Kconfig condition for SPL and TPL At present these options can be enabled when bloblist is not enabled for SPL or TPL. This is incorrect as SPL handoff requires bloblist. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:11:17 +00:00
depends on HANDOFF && SPL_BLOBLIST
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:44:09 +00:00
default y
help
This option enables SPL to write handoff information. This can be
used to pass information like the size of SDRAM from SPL to U-Boot
proper. Also SPL can receive information from TPL in the same place
if that is enabled.
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
config SPL_LDSCRIPT
string "Linker script for the SPL stage"
spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries The default SPL / TPL linker script is in the $(ARCH) directory. The way we use this today works but isn't ideal. With an update to Kconfig to re-sync with the Linux Kernel, we need to escape the '$' here so that it will end up being evaluated by make. Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-11 22:11:11 +00:00
default "arch/\$(ARCH)/cpu/u-boot-spl.lds"
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
help
The SPL stage will usually require a different linker-script
(as it runs from a different memory region) than the regular
U-Boot stage. Set this to the path of the linker-script to
be used for SPL.
configs: move CONFIG_SPL_TEXT_BASE to Kconfig Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-30 12:31:53 +00:00
config SPL_TEXT_BASE
hex "SPL Text Base"
default ISW_ENTRY_ADDR if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig The choice of the SPL_TEXT_BASE is not really a decision that should be specified by each board's defconfig, as this setting is actually dictated by the SoC's memory map and the BootROM behaviour. To make this obvious and reduce the clutter in the defconfig files, let's specify the SoC constraints in the Kconfig stanza. This allows us to remove these lines from the defconfig files again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-27 00:45:11 +00:00
default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I
sunxi: Introduce common symbol for H6 like SoCs It turns out that there are at least 2 other SoCs which have basically the same memory map, similar clocks and other features as H6. It's very likely that we'll see more such SoCs in the future. In order to ease porting to new SoCs and lower ifdef clutter, introduce common symbol for them. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:34 +00:00
default 0x20060 if SUN50I_GEN_H6
sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig The choice of the SPL_TEXT_BASE is not really a decision that should be specified by each board's defconfig, as this setting is actually dictated by the SoC's memory map and the BootROM behaviour. To make this obvious and reduce the clutter in the defconfig files, let's specify the SoC constraints in the Kconfig stanza. This allows us to remove these lines from the defconfig files again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-27 00:45:11 +00:00
default 0x00060 if ARCH_SUNXI
arm64: zynqmp: Define default SPL_TEXT_BASE address in Kconfig Define default address via Kconfig. There is no need to change this address for most of the boards but it is also possible. This one line save a lot of lines in defconfigs that's why make sense to do it. The similar change has been done by commit 9340d8fe8beb ("sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2019-09-11 06:49:31 +00:00
default 0xfffc0000 if ARCH_ZYNQMP
configs: move CONFIG_SPL_TEXT_BASE to Kconfig Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-30 12:31:53 +00:00
default 0x0
help
The address in memory that SPL will be running from.
Convert CONFIG_SPL_BOARD_INIT to Kconfig This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-03 09:13:32 +00:00
config SPL_BOARD_INIT
bool "Call board-specific initialization in SPL"
help
If this option is enabled, U-Boot will call the function
spl_board_init() from board_init_r(). This function should be
provided by the board.
spl: add a 'return to bootrom' boot method Some devices (e.g. the RK3368) have only limited SRAM, but provide support for loading the next boot stage after our SPL performs basic setup (e.g. DRAM). For target systems like these, we add a boot device BOOTROM that will invoke a board-specific hook to return to the bootrom (if supported). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-22 21:38:36 +00:00
config SPL_BOOTROM_SUPPORT
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
bool "Support returning to the BOOTROM"
spl: add a 'return to bootrom' boot method Some devices (e.g. the RK3368) have only limited SRAM, but provide support for loading the next boot stage after our SPL performs basic setup (e.g. DRAM). For target systems like these, we add a boot device BOOTROM that will invoke a board-specific hook to return to the bootrom (if supported). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-22 21:38:36 +00:00
help
Some platforms (e.g. the Rockchip RK3368) provide support in their
ROM for loading the next boot-stage after performing basic setup
from the SPL stage.
Enable this option, to return to the BOOTROM through the
BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
boot device list, if not implemented for a given board)
bootcount: spl: Enable bootcount support in SPL New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been added to allow drivers/bootcount code re-usage in SPL. This code is necessary to use and setup bootcount in SPL in the case of falcon boot mode. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-02 14:10:50 +00:00
config SPL_BOOTCOUNT_LIMIT
bool "Support bootcount in SPL"
bootcount: allow to use this feature on TPL This commit add an option TPL_BOOTCOUNT_LIMIT to use bootcount on TPL. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-11 18:56:47 +00:00
depends on SPL_ENV_SUPPORT && !TPL_BOOTCOUNT_LIMIT
bootcount: spl: Enable bootcount support in SPL New, SPL related config option - CONFIG_SPL_BOOTCOUNT_LIMIT has been added to allow drivers/bootcount code re-usage in SPL. This code is necessary to use and setup bootcount in SPL in the case of falcon boot mode. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-02 14:10:50 +00:00
help
On some boards, which use 'falcon' mode, it is necessary to check
and increment the number of boot attempts. Such boards do not
use proper U-Boot for normal boot flow and hence needs those
adjustments to be done in the SPL.
spl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a positive option CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it encounters RAW images, express this same functionality as a positive option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT Also move uses of this to defconfigs. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Rework Kconfig logic a little, move to common/spl/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-16 17:18:38 +00:00
config SPL_RAW_IMAGE_SUPPORT
bool "Support SPL loading and booting of RAW images"
sata: Rename SATA_SUPPORT to SATA Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:17 +00:00
default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA))
Kconfig: Disable non-FIT SPL loading for TI secure devices Non-FIT SPL image loading support should be disabled for TI secure devices as the image handlers for those image types do not follow our secure boot flow. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-16 17:18:40 +00:00
default y if !TI_SECURE_DEVICE
spl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a positive option CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it encounters RAW images, express this same functionality as a positive option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT Also move uses of this to defconfigs. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Rework Kconfig logic a little, move to common/spl/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-16 17:18:38 +00:00
help
SPL will support loading and booting a RAW image when this option
is y. If this is not set, SPL will move on to other available
boot media to find a suitable image.
spl: Add option to enable SPL Legacy image support Add a Kconfig option that enables Legacy image support, this allows boards to explicitly disable this, for instance when needed for security reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Move to common/spl/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-16 17:18:39 +00:00
config SPL_LEGACY_IMAGE_SUPPORT
bool "Support SPL loading and booting of Legacy images"
SPL: Default to disabling legacy image support when using FIT When we have a FIT image being used by SPL by default that means the most common case is that we'll never run into a legacy image. Disable legacy image support by default in that case to reclaim space. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-23 11:14:08 +00:00
default y if !TI_SECURE_DEVICE && !SPL_LOAD_FIT
spl: Add option to enable SPL Legacy image support Add a Kconfig option that enables Legacy image support, this allows boards to explicitly disable this, for instance when needed for security reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Move to common/spl/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-02-16 17:18:39 +00:00
help
SPL will support loading and booting Legacy images when this option
is y. If this is not set, SPL will move on to other available
boot media to find a suitable image.
spl: implement CRC check on U-Boot uImage SPL currently does not check uImage CRCs when loading U-Boot. This patch adds checking the uImage CRC when SPL loads U-Boot. It does this by reusing the existing config option SPL_CRC32_SUPPORT to allow leaving out the CRC check on boards where the additional code size or boot time is a problem (adding the CRC check currently adds ~1.4 kByte to flash). The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL support for legacy images is enabled to check the CRC on all boards that don't actively take countermeasures. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-10 20:34:37 +00:00
config SPL_LEGACY_IMAGE_CRC_CHECK
bool "Check CRC of Legacy images"
depends on SPL_LEGACY_IMAGE_SUPPORT
Kconfig: Rename SPL_CRC32_SUPPORT to SPL_CRC32 Drop the _SUPPORT suffix so we can use CONFIG_IS_ENABLED() with this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:32 +00:00
select SPL_CRC32
spl: implement CRC check on U-Boot uImage SPL currently does not check uImage CRCs when loading U-Boot. This patch adds checking the uImage CRC when SPL loads U-Boot. It does this by reusing the existing config option SPL_CRC32_SUPPORT to allow leaving out the CRC check on boards where the additional code size or boot time is a problem (adding the CRC check currently adds ~1.4 kByte to flash). The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL support for legacy images is enabled to check the CRC on all boards that don't actively take countermeasures. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-10 20:34:37 +00:00
help
Enable this to check the CRC of Legacy images. While this increases
reliability, it affects both code size and boot duration.
If disabled, Legacy images are booted if the image magic and size
are correct, without further integrity checks.
Kconfig: Move SPL settings into their own file Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:22 +00:00
config SPL_SYS_MALLOC_SIMPLE
bool
prompt "Only use malloc_simple functions in the SPL"
help
Say Y here to only use the *_simple malloc functions from
malloc_simple.c, rather then using the versions from dlmalloc.c;
this will make the SPL binary smaller at the cost of more heap
usage as the *_simple malloc functions do not re-use free-ed mem.
spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL As include/malloc.h already checks for SYS_MALLOC_SIMPLE using the CONFIG_IS_ENABLED macro, we need to move to having separate entries as we switch to fully separate configuration for SPL and TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-30 16:57:25 +00:00
config TPL_SYS_MALLOC_SIMPLE
bool
prompt "Only use malloc_simple functions in the TPL"
Kconfigs: Various: Fix some SPL, TPL and ARM64 dependencies Several options are presenting themselves on a various boards where the options are clearly not used. (ie, arm64 options on arm9, or SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-13 19:32:30 +00:00
depends on TPL
spl: Kconfig: split SYS_MALLOC_SIMPLE for TPL and SPL As include/malloc.h already checks for SYS_MALLOC_SIMPLE using the CONFIG_IS_ENABLED macro, we need to move to having separate entries as we switch to fully separate configuration for SPL and TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-30 16:57:25 +00:00
help
Say Y here to only use the *_simple malloc functions from
malloc_simple.c, rather then using the versions from dlmalloc.c;
this will make the TPL binary smaller at the cost of more heap
usage as the *_simple malloc functions do not re-use free-ed mem.
Kconfig: Move SPL settings into their own file Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:22 +00:00
config SPL_STACK_R
bool "Enable SDRAM location for SPL stack"
help
SPL starts off execution in SRAM and thus typically has only a small
stack available. Since SPL sets up DRAM while in its board_init_f()
function, it is possible for the stack to move there before
board_init_r() is reached. This option enables a special SDRAM
location for the SPL stack. U-Boot SPL switches to this after
board_init_f() completes, and before board_init_r() starts.
config SPL_STACK_R_ADDR
depends on SPL_STACK_R
hex "SDRAM location for SPL stack"
TI: ARCH_OMAP2PLUS: Enable SPL_STACK_R and provide default value On ARCH_OMAP2PLUS platforms we know what the DDR layout is going to be, and that it is safe to use SPL_STACK_R and provide a default value for it. select this and re-sync the defconfigs. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-17 15:44:49 +00:00
default 0x82000000 if ARCH_OMAP2PLUS
Kconfig: Move SPL settings into their own file Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:22 +00:00
help
Specify the address in SDRAM for the SPL stack. This will be set up
before board_init_r() is called.
config SPL_STACK_R_MALLOC_SIMPLE_LEN
depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE
hex "Size of malloc_simple heap after switching to DRAM SPL stack"
default 0x100000
help
Specify the amount of the stack to use as memory pool for
malloc_simple after switching the stack to DRAM. This may be set
to give board_init_r() a larger heap then the initial heap in
SRAM which is limited to SYS_MALLOC_F_LEN bytes.
config SPL_SEPARATE_BSS
bool "BSS section is in a different memory region from text"
help
Some platforms need a large BSS region in SPL and can provide this
because RAM is already set up. In this case BSS can be moved to RAM.
This option should then be enabled so that the correct device tree
location is used. Normally we put the device tree at the end of BSS
but with this option enabled, it goes at _image_binary_end.
dm: core: Add an option to support SPL in read-only memory Some systems (e.g. x86 APL) run SPL from read-only memory. The device instances created by dtoc are therefore not writeable. To make things work we would need to copy the devices to read/write memory. To avoid this, add an option to use a separate runtime struct for devices, just as is done for drivers. This can be used to hold information that changes at runtime, avoiding the need for a copy. Also add a Kconfig option for read-only SPL, which selects this feature. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15 04:25:35 +00:00
config SPL_READ_ONLY
bool
depends on SPL_OF_PLATDATA
# Bind cannot be supported because the udevice structs are in read-only
# memory so we cannot update the linked lists.
select SPL_OF_PLATDATA_NO_BIND
select SPL_OF_PLATDATA_RT
help
Some platforms (e.g. x86 Apollo Lake) load SPL into a read-only
section of memory. This means that of-platdata must make a copy (in
writeable memory) of anything it wants to modify, such as
device-private data.
spl: Make SPL_DISABLE_BANNER_PRINT a positive option Rather than having a negative option, make this a positive option and enable it by default. This makes it easier to understand. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:57 +00:00
config SPL_BANNER_PRINT
bool "Enable output of the SPL banner 'U-Boot SPL ...'"
default y
help
If this option is enabled, SPL will print the banner with version
cosmetic: Fix spelling and whitespace errors Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-14 02:18:03 +00:00
info. Disabling this option could be useful to reduce SPL boot time
spl: Make SPL_DISABLE_BANNER_PRINT a positive option Rather than having a negative option, make this a positive option and enable it by default. This makes it easier to understand. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:57 +00:00
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
config TPL_BANNER_PRINT
bool "Enable output of the TPL banner 'U-Boot TPL ...'"
Kconfigs: Various: Fix some SPL, TPL and ARM64 dependencies Several options are presenting themselves on a various boards where the options are clearly not used. (ie, arm64 options on arm9, or SPL/TPL options when SPL or TPL are not defined) This patch is not attempting to be a complete list of items, but more like low hanging fruit. This patch attempts to reduce some of the menuconfig noise by defining dependencies so they don't appear when not used. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-13 19:32:30 +00:00
depends on TPL
spl: Make SPL_DISABLE_BANNER_PRINT a positive option Rather than having a negative option, make this a positive option and enable it by default. This makes it easier to understand. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:57 +00:00
default y
spl: add option to disable SPL banner output Selecting this option will reduce SPL boot time by approx. 6 ms (e. g. with 70 bytes long banner string at 115200 baud). Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-25 17:45:22 +00:00
help
cosmetic: Fix spelling and whitespace errors Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-14 02:18:03 +00:00
If this option is enabled, TPL will print the banner with version
info. Disabling this option could be useful to reduce TPL boot time
spl: Make SPL_DISABLE_BANNER_PRINT a positive option Rather than having a negative option, make this a positive option and enable it by default. This makes it easier to understand. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:57 +00:00
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
spl: add option to disable SPL banner output Selecting this option will reduce SPL boot time by approx. 6 ms (e. g. with 70 bytes long banner string at 115200 baud). Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-25 17:45:22 +00:00
spl: Allow performing BSS init early before board_init_f() On some platform we have sufficient memory available early on to allow setting up and using a basic BSS prior to entering board_init_f(). Doing so can for example be used to carry state over to board_init_r() without having to resort to extending U-Boot's global data structure. To support such scenarios add a Kconfig option called CONFIG_SPL_EARLY_BSS to allow moving the initialization of BSS prior to entering board_init_f(), if enabled. Note that using this option usually should go along with using CONFIG_SPL_SEPARATE_BSS and configuring BSS to be located in memory actually available prior to board_init_f(). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-04 22:55:45 +00:00
config SPL_EARLY_BSS
depends on ARM && !ARM64
bool "Allows initializing BSS early before entering board_init_f"
help
On some platform we have sufficient memory available early on to
allow setting up and using a basic BSS prior to entering
board_init_f. Activating this option will also de-activate the
clearing of BSS during the SPL relocation process, thus allowing
to carry state from board_init_f to board_init_r by way of BSS.
spl: Kconfig: Move SPL_DISPLAY_PRINT to Kconfig Move this option to Kconfig and tidy up existing uses. Also add a function comment to the header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-25 00:19:56 +00:00
config SPL_DISPLAY_PRINT
bool "Display a board-specific message in SPL"
help
If this option is enabled, U-Boot will call the function
spl_display_print() immediately after displaying the SPL console
banner ("U-Boot SPL ..."). This function should be provided by
the board.
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
bool "MMC raw mode: by sector"
spl: Add default values for ARCH_MX7 ARCH_MX6 has default values for SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR. Do the same for ARCH_MX7 so that users may have a consistent experience through the i.MX families. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-11 18:08:05 +00:00
default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER || \
ARCH_MX6 || ARCH_MX7 || \
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \
ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
riscv: sifive: Rename fu540 board to unleashed In preparation to add SiFive Unmatched board support, let's rename the existing fu540 board to unleashed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-03-17 03:10:58 +00:00
OMAP44XX || OMAP54XX || AM33XX || AM43XX || \
board: sifive: add HiFive Unmatched board support Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-27 13:52:13 +00:00
TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
help
Use sector number for specifying U-Boot location on MMC/SD in
raw mode.
config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
hex "Address on the MMC to load U-Boot from"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
sunxi: support loading with SPL > 32KB H616 supports and needs bigger SPL than 32 KiB, mostly due to big DRAM driver and need for PMIC configuration, which pulls several drivers which are not needed otherwise. spl_mmc_get_uboot_raw_sector() will now compare pre-configured size with that, reported in SPL header. If size in header is bigger, it will use that value instead. In the process of function rework, also add missing function argument. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org>
2021-01-11 20:11:39 +00:00
default 0x40 if ARCH_SUNXI
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
default 0x75 if ARCH_DAVINCI
spl: Add default values for ARCH_MX7 ARCH_MX6 has default values for SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR and SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR. Do the same for ARCH_MX7 so that users may have a consistent experience through the i.MX families. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-11 18:08:05 +00:00
default 0x8a if ARCH_MX6 || ARCH_MX7
spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip Rockchip use a 'loader2' partition for U-Boot, so u-boot.bin or u-boot.itb load by SPL need to locate at0x4000. Detail here: http://opensource.rock-chips.com/wiki_Boot_option Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-02 07:16:34 +00:00
default 0x100 if ARCH_UNIPHIER
arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:29 +00:00
default 0x0 if ARCH_MVEBU
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
default 0x200 if ARCH_SOCFPGA || ARCH_AT91
default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
arm: K3: Add initial support for TI's K3 generation of SoCs Add support for Texas Instruments' K3 Generation Processor families. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-08-27 10:27:08 +00:00
OMAP54XX || AM33XX || AM43XX || ARCH_K3
spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip Rockchip use a 'loader2' partition for U-Boot, so u-boot.bin or u-boot.itb load by SPL need to locate at0x4000. Detail here: http://opensource.rock-chips.com/wiki_Boot_option Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-02 07:16:34 +00:00
default 0x4000 if ARCH_ROCKCHIP
board: sifive: add HiFive Unmatched board support Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-27 13:52:13 +00:00
default 0x822 if TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-16 17:19:05 +00:00
help
Address on the MMC to load U-Boot from, when the MMC is being used
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
spl: mmc: support uboot image offset on main partition On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-15 07:08:08 +00:00
config SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET
hex "U-Boot main hardware partition image offset"
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
sunxi: support loading with SPL > 32KB H616 supports and needs bigger SPL than 32 KiB, mostly due to big DRAM driver and need for PMIC configuration, which pulls several drivers which are not needed otherwise. spl_mmc_get_uboot_raw_sector() will now compare pre-configured size with that, reported in SPL header. If size in header is bigger, it will use that value instead. In the process of function rework, also add missing function argument. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org>
2021-01-11 20:11:39 +00:00
default 0x10 if ARCH_SUNXI
spl: mmc: support uboot image offset on main partition On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-15 07:08:08 +00:00
default 0x0
help
On some platforms SPL location depends on hardware partition. The ROM
code skips the MBR sector when loading SPL from main hardware data
partition. This adds offset to the main U-Boot image. Set this symbol
to the number of skipped sectors.
If unsure, leave the default.
SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:35 +00:00
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
bool "MMC Raw mode: by partition"
help
Use a partition for loading U-Boot when using MMC/SD in raw mode.
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
hex "Partition to use to load U-Boot from"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:35 +00:00
default 1
help
Partition on the MMC to load U-Boot from when the MMC is being
used in raw mode
SPL: add support to boot from a partition type the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:34 +00:00
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
bool "MMC raw mode: by partition type"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on DOS_PARTITION && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
SPL: add support to boot from a partition type the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:34 +00:00
help
Use partition type for specifying U-Boot partition on MMC/SD in
raw mode. U-Boot will be loaded from the first partition of this
type to be found.
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
hex "Partition Type on the MMC to load U-Boot from"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
SPL: add support to boot from a partition type the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-11 01:15:34 +00:00
help
Partition Type on the MMC to load U-Boot from, when the MMC is being
used in raw mode.
spl: mmc: make eMMC HW boot partition configuration optional Loading U-Boot on i.MX8QXP MEK board is broken since recent changes in spl_mmc: U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46400 spl: mmc partition switch failed SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option is selected automatically and overrides the EXT_CSC_PART_CONFIG configurations with default value, always selecting the eMMC boot partition 1. Boards which place U-Boot image in other partitions became not bootable. Fix this by making the eMMC HW boot partition selection optional. Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition) Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-18 19:38:33 +00:00
config SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG
bool "Override eMMC EXT_CSC_PART_CONFIG by user defined partition"
depends on SUPPORT_EMMC_BOOT
help
eMMC boot partition is normally configured by the bits of the EXT_CSD
register (EXT_CSC_PART_CONFIG), BOOT_PARTITION_ENABLE field. In some
cases it might be required in SPL to load the image from different
partition than the partition selected by EXT_CSC_PART_CONFIG register.
Enable this option if you intend to use an eMMC boot partition other
then selected via EXT_CSC_PART_CONFIG register and specify the custom
partition number by the CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
option.
config SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
int "Number of the eMMC boot partition to use"
depends on SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG
default 1
help
eMMC boot partition number to use when the eMMC in raw mode and
the eMMC EXT_CSC_PART_CONFIG selection should be overridden in SPL
by user defined partition number.
Kconfig: Rename SPL_CRC32_SUPPORT to SPL_CRC32 Drop the _SUPPORT suffix so we can use CONFIG_IS_ENABLED() with this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:32 +00:00
config SPL_CRC32
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support CRC32"
image: Use the correct checks for CRC32 Add a host Kconfig for CRC32. With this we can use CONFIG_IS_ENABLED(CRC32) directly in the host build, so drop the unnecessary indirection. Add a few more conditions to SPL_CRC32 to avoid build failures as well as TPL_CRC32. Also update hash.c to make crc32 optional and to actually take notice of SPL_CRC32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-26 01:43:24 +00:00
default y if SPL_LEGACY_IMAGE_SUPPORT || SPL_EFI_PARTITION
default y if SPL_ENV_SUPPORT || TPL_BLOBLIST
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
spl: implement CRC check on U-Boot uImage SPL currently does not check uImage CRCs when loading U-Boot. This patch adds checking the uImage CRC when SPL loads U-Boot. It does this by reusing the existing config option SPL_CRC32_SUPPORT to allow leaving out the CRC check on boards where the additional code size or boot time is a problem (adding the CRC check currently adds ~1.4 kByte to flash). The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL support for legacy images is enabled to check the CRC on all boards that don't actively take countermeasures. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-02-10 20:34:37 +00:00
Enable this to support CRC32 in uImages or FIT images within SPL.
This is a 32-bit checksum value that can be used to verify images.
For FIT images, this is the least secure type of checksum, suitable
for detected accidental image corruption. For secure applications you
should consider SHA1 or SHA256.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
Kconfig: Rename SPL_MD5_SUPPORT to SPL_MD5 Drop the _SUPPORT suffix so we can use CONFIG_IS_ENABLED() with this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-14 22:05:33 +00:00
config SPL_MD5
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support MD5"
depends on SPL_FIT
help
Enable this to support MD5 in FIT images within SPL. An MD5
checksum is a 128-bit hash value used to check that the image
contents have not been corrupted. Note that MD5 is not considered
secure as it is possible (with a brute-force attack) to adjust the
image while still retaining the same MD5 hash value. For secure
applications where images may be changed maliciously, you should
Add support for SHA384 and SHA512 The current recommendation for best security practice from the US government is to use SHA384 for TOP SECRET [1]. This patch adds support for SHA384 and SHA512 in the hash command, and also allows FIT images to be hashed with these algorithms, and signed with sha384,rsaXXXX and sha512,rsaXXXX The SHA implementation is adapted from the linux kernel implementation. [1] Commercial National Security Algorithm Suite http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-04-16 05:36:52 +00:00
consider SHA256 or SHA384.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
config SPL_FIT_IMAGE_TINY
bool "Remove functionality from SPL FIT loading to reduce size"
depends on SPL_FIT
sunxi: Introduce common symbol for H6 like SoCs It turns out that there are at least 2 other SoCs which have basically the same memory map, similar clocks and other features as H6. It's very likely that we'll see more such SoCs in the future. In order to ease porting to new SoCs and lower ifdef clutter, introduce common symbol for them. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:34 +00:00
default y if MACH_SUN50I || MACH_SUN50I_H5 || SUN50I_GEN_H6
imx8m: Enable CONFIG_SPL_FIT_IMAGE_TINY for iMX8M If we don't define CONFIG_SPL_FIT_IMAGE_TINY, when loading images from FIT, the SPL will record all loadables' info to u-boot's FDT. This causes problem when HAB is enabled, because FDT's content is modified before we authenticate it. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-20 10:19:15 +00:00
default y if ARCH_IMX8M
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
help
Enable this to reduce the size of the FIT image loading code
in SPL, if space for the SPL binary is very tight.
spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY Some boards, specifically 64-bit Allwinner boards (sun50i), are extremely limited on SPL size. One strategy that was used to make space was to remove the FIT "os" property parsing code, because it uses a rather large lookup table. However, this forces the legacy FIT parsing code path, which requires the "firmware" entry in the FIT to reference the U-Boot binary, even if U-Boot is not the next binary in the boot sequence (for example, on sun50i boards, ATF is run first). This prevents the same FIT image from being used with a SPL with CONFIG_SPL_FIT_IMAGE_TINY=n and CONFIG_SPL_ATF=y, because the boot method selection code looks at `spl_image.os`, which is only set from the "firmware" entry's "os" property. To be able to use CONFIG_SPL_ATF=y, the "firmware" entry in the FIT must be ATF, and U-Boot must be a loadable. For this to work, we need to parse the "os" property just enough to tell U-Boot from other images, so we can find it in the loadables list to append the FDT, and so we don't try to append the FDT to ATF (which could clobber adjacent firmware). So add the minimal code necessary to distinguish U-Boot/non-U-Boot loadables with CONFIG_SPL_FIT_IMAGE_TINY=y. This adds about 300 bytes, much less than the 7400 bytes added by CONFIG_SPL_FIT_IMAGE_TINY=n. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:13 +00:00
This skips the recording of each loaded payload
spl: fit: add SPL_FIT_IMAGE_TINY config to reduce code-size A minor code-size increase from the changes for tracking the os-type of FIT images and from infrastructure for recording the loadables into the the loaded FDT, broke the builds for sun50i and some OMAP2+ devices. This change adds a new config option (enabled by default for MACH_SUN50I, MACH_SUN50I_H5 and ARCH_OMAP2PLUS) that does skips these processing steps (bringing code size down to below the limit again). The os-type is not evaluated, but assumed to be IH_OS_UBOOT (i.e. taking the code-paths intended for backward-compatibility). Note that enabling this config option precludes any useful downstream processing, such as utilising a special calling convention for ATF or OPTEE, based on the os-type of the loadables. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-24 12:26:03 +00:00
(i.e. loadable) into the FDT (modifying the loaded FDT to
ensure this information is available to the next image
invoked).
Rename CACHE_SUPPORT to CACHE Rename this option so that CONFIG_IS_ENABLED can be used with it. Oddly there is already an SPL_CACHE option. Drop it in favour of this one. Drop the special SPL Makefile rule which is now superfluous. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:15 +00:00
config SPL_CACHE
spl: cache: Allow cache drivers in SPL When ax25-ae350 try to enable v5l2 cache driver in SPL configuration, it need this option for cache support in SPL. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-11-14 05:52:26 +00:00
bool "Support CACHE drivers"
help
Enable CACHE drivers in SPL. These drivers can keep data so that
future requests for that data can be served faster. Enable this option
to build the drivers in drivers/cache as part of an SPL build.
cpu: Rename SPL_CPU_SUPPORT to SPL_CPU The _SUPPORT suffix is from an earlier time and interferes with use of the CONFIG_IS_ENABLED() macro. Rename the option to drop the suffix. Tidy up the TODO that prompted this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15 05:11:18 +00:00
config SPL_CPU
spl: Allow CPU drivers to be used in SPL Add a new Kconfig option to allow CPU drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:29 +00:00
bool "Support CPU drivers"
help
Enable this to support CPU drivers in SPL. These drivers can set
up CPUs and provide information about them such as the model and
name. This can be useful in SPL since setting up the CPUs earlier
may improve boot performance. Enable this option to build the
drivers in drivers/cpu as part of an SPL build.
Rename SPL_CRYPTO_SUPPORT to SPL_CRYPTO Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:25 +00:00
config SPL_CRYPTO
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support crypto drivers"
help
Enable crypto drivers in SPL. These drivers can be used to
accelerate secure boot processing in secure applications. Enable
this option to build the drivers in drivers/crypto as part of an
SPL build.
Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-15 11:30:41 +00:00
config SPL_DMA
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support DMA drivers"
help
Enable DMA (direct-memory-access) drivers in SPL. These drivers
can be used to handle memory-to-peripheral data transfer without
the CPU moving the data. Enable this option to build the drivers
in drivers/dma as part of an SPL build.
Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:31 +00:00
config SPL_DRIVERS_MISC
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support misc drivers"
help
Enable miscellaneous drivers in SPL. These drivers perform various
tasks that don't fall nicely into other categories, Enable this
option to build the drivers in drivers/misc as part of an SPL
build, for those that support building in SPL (not all drivers do).
config SPL_ENV_SUPPORT
bool "Support an environment"
help
Enable environment support in SPL. The U-Boot environment provides
a number of settings (essentially name/value pairs) which can
control many aspects of U-Boot's operation. Normally this is not
needed in SPL as it has a much simpler task with less
configuration. But some boards use this to support 'Falcon' boot
on EXT2 and FAT, where SPL boots directly into Linux without
env: Rename getenv/_f() to env_get() We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-03 18:22:12 +00:00
starting U-Boot first. Enabling this option will make env_get()
env: Rename setenv() to env_set() We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-03 18:22:09 +00:00
and env_set() available in SPL.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
spl: saveenv: adding saveenv support in SPL By default saveenv option is not supported for SPL. This patch enable the support for save environment variable for SPL build. Enable save environment support in SPL after setenv. By default the saveenv option is not provided in SPL, but some boards need this support in 'Falcon' boot, where SPL need to boot from different images based on environment variable set by OS. For example OS may set "reboot_image" environment variable to "recovery" inorder to boot recovery image by SPL. The SPL read "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environemnt. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Simon Glass <sig@chromium.org> change in v1: - dropped SUPPORT, use CONFIG_SPL_SAVEENV - updates the comments in mmc_private.h
2016-09-28 09:16:18 +00:00
config SPL_SAVEENV
bool "Support save environment"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on SPL_ENV_SUPPORT
mmc: add a Kconfig option to enable the support for MMC write operations This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-04 14:23:32 +00:00
select SPL_MMC_WRITE if ENV_IS_IN_MMC
spl: saveenv: adding saveenv support in SPL By default saveenv option is not supported for SPL. This patch enable the support for save environment variable for SPL build. Enable save environment support in SPL after setenv. By default the saveenv option is not provided in SPL, but some boards need this support in 'Falcon' boot, where SPL need to boot from different images based on environment variable set by OS. For example OS may set "reboot_image" environment variable to "recovery" inorder to boot recovery image by SPL. The SPL read "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environemnt. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Simon Glass <sig@chromium.org> change in v1: - dropped SUPPORT, use CONFIG_SPL_SAVEENV - updates the comments in mmc_private.h
2016-09-28 09:16:18 +00:00
help
Enable save environment support in SPL after setenv. By default
the saveenv option is not provided in SPL, but some boards need
this support in 'Falcon' boot, where SPL need to boot from
different images based on environment variable set by OS. For
example OS may set "reboot_image" environment variable to
"recovery" inorder to boot recovery image by SPL. The SPL read
"reboot_image" and act accordingly and change the reboot_image
u-boot: Fix several typos 's/environemnt/environment/' and 's/Environemnt/Environment/' Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
2018-06-07 14:17:19 +00:00
to default mode using setenv and save the environment.
spl: saveenv: adding saveenv support in SPL By default saveenv option is not supported for SPL. This patch enable the support for save environment variable for SPL build. Enable save environment support in SPL after setenv. By default the saveenv option is not provided in SPL, but some boards need this support in 'Falcon' boot, where SPL need to boot from different images based on environment variable set by OS. For example OS may set "reboot_image" environment variable to "recovery" inorder to boot recovery image by SPL. The SPL read "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environemnt. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Simon Glass <sig@chromium.org> change in v1: - dropped SUPPORT, use CONFIG_SPL_SAVEENV - updates the comments in mmc_private.h
2016-09-28 09:16:18 +00:00
Rename SPL_ETH_SUPPORT to SPL_ETH Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:26 +00:00
config SPL_ETH
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support Ethernet"
depends on SPL_ENV_SUPPORT
net: Move network rules to drivers/net The code under drivers/net is related to ethernet networking drivers, in some fashion or another. Drop these from the top-level Makefile and also move the phy rule into drivers/net/Makefile which is where it belongs. Make the new rule for drivers/net check for the build-stage relevant ETH symbol. Fix up some Kconfig dependencies while we're here to mirror how the Makefile logic now works. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Introduce ETH, Kconfig dependency changes, am43xx fix] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:31 +00:00
depends on SPL_NET
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable access to the network subsystem and associated Ethernet
drivers in SPL. This permits SPL to load U-Boot over an Ethernet
link rather than from an on-board peripheral. Environment support
is required since the network stack uses a number of environment
net: Rename SPL_NET_SUPPORT to SPL_NET Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:30 +00:00
variables. See also SPL_NET.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4 Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:05 +00:00
config SPL_FS_EXT4
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support EXT filesystems"
help
Enable support for EXT2/3/4 filesystems with SPL. This permits
U-Boot (or Linux in Falcon mode) to be loaded from an EXT
filesystem from within SPL. Support for the underlying block
device (e.g. MMC or USB) must be enabled separately.
fs/squashfs: new filesystem Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:47 +00:00
config SPL_FS_SQUASHFS
bool "Support SquashFS filesystems"
select FS_SQUASHFS
help
Enable support for SquashFS filesystems with SPL. This permits
U-Boot (or Linux in Falcon mode) to be loaded from a SquashFS
filesystem from within SPL. Support for the underlying block
device (e.g. MMC or USB) must be enabled separately.
spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:03 +00:00
config SPL_FS_FAT
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support FAT filesystems"
fs: fat: add kbuild configuration support Add Kconfig symbols for various configurations supported by FAT filesystem support code. CONFIG_SUPPORT_VFAT has been left out since its force enabled in include/fat.h and probably should get removed at some point. Signed-off-by: Sekhar Nori <nsekhar@ti.com> [trini: add select FS_FAT for CMD_FAT and SPL_FAT_SUPPORT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-02 12:23:59 +00:00
select FS_FAT
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for FAT and VFAT filesystems with SPL. This
permits U-Boot (or Linux in Falcon mode) to be loaded from a FAT
filesystem from within SPL. Support for the underlying block
device (e.g. MMC or USB) must be enabled separately.
spl: fat/fs: Add option to include/exclude FAT write build in SPL Most of the time SPL only needs very simple FAT reading, so having CONFIG_IS_ENABLED(FAT_WRITE) to exclude it from SPL build would help to save 64KiB default max clustersize from memory. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:04 +00:00
config SPL_FAT_WRITE
bool "Support write for FAT filesystems"
help
Enable write support for FAT and VFAT filesystems with SPL.
Support for the underlying block device (e.g. MMC or USB) must be
enabled separately.
fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile and zynqmp.c to simplify if/endif logic in zynqmp.c. This change is mostly done to be able to use CONFIG_IS_ENABLED macro and obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync. And removing one line from Topic Miami boards which is not needed because symbol is not enabled via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 12:41:56 +00:00
config SPL_FPGA
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support FPGAs"
help
Enable support for FPGAs in SPL. Field-programmable Gate Arrays
provide software-configurable hardware which is typically used to
implement peripherals (such as UARTs, LCD displays, MMC) or
accelerate custom processing functions, such as image processing
or machine learning. Sometimes it is useful to program the FPGA
as early as possible during boot, and this option can enable that
within SPL.
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
config SPL_GPIO
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
bool "Support GPIO in SPL"
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for GPIOs (General-purpose Input/Output) in SPL.
GPIOs allow U-Boot to read the state of an input line (high or
low) and set the state of an output line. This can be used to
drive LEDs, control power to various system parts and read user
input. GPIOs can be useful in SPL to enable a 'sign-of-life' LED,
for example. Enable this option to build the drivers in
drivers/gpio as part of an SPL build.
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
config SPL_I2C
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support I2C"
help
Enable support for the I2C (Inter-Integrated Circuit) bus in SPL.
I2C works with a clock and data line which can be driven by a
one or more masters or slaves. It is a fairly complex bus but is
widely used as it only needs two lines for communication. Speeds of
400kbps are typical but up to 3.4Mbps is supported by some
hardware. I2C can be useful in SPL to configure power management
ICs (PMICs) before raising the CPU clock speed, for example.
Enable this option to build the drivers in drivers/i2c as part of
an SPL build.
config SPL_LIBCOMMON_SUPPORT
bool "Support common libraries"
help
Enable support for common U-Boot libraries within SPL. These
libraries include common code to deal with U-Boot images,
environment and USB, for example. This option is enabled on many
boards. Enable this option to build the code in common/ as part of
an SPL build.
config SPL_LIBDISK_SUPPORT
kconfig: fix typo 'parition' Replaced misspelled words "parition"/"paritioning" (missing 't') in two Kconfig files by correct words "partition"/"partitioning" Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-16 07:44:55 +00:00
bool "Support disk partitions"
blk: Rework guard around part_init call The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05 13:23:38 +00:00
select PARTITIONS
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for disk partitions within SPL. 'Disk' is something
of a misnomer as it includes non-spinning media such as flash (as
used in MMC and USB sticks). Partitions provide a way for a disk
to be split up into separate regions, with a partition table placed
at the start or end which describes the location and size of each
'partition'. These partitions are typically uses as individual block
devices, typically with an EXT2 or FAT filesystem in each. This
option enables whatever partition support has been enabled in
U-Boot to also be used in SPL. It brings in the code in disk/.
config SPL_LIBGENERIC_SUPPORT
bool "Support generic libraries"
help
Enable support for generic U-Boot libraries within SPL. These
libraries include generic code to deal with device tree, hashing,
printf(), compression and the like. This option is enabled on many
boards. Enable this option to build the code in lib/ as part of an
SPL build.
spl: Allow mailbox drivers to be used within SPL Add an option for building mailbox drivers within SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:27:49 +00:00
config SPL_DM_MAILBOX
bool "Support Mailbox"
help
Enable support for Mailbox within SPL. This enable the inter
processor communication protocols tobe used within SPL. Enable
this option to build the drivers in drivers/mailbox as part of
SPL build.
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
config SPL_MMC
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support MMC"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on MMC
blk: Rework guard around part_init call The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05 13:23:38 +00:00
select HAVE_BLOCK_DEVICE
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for MMC (Multimedia Card) within SPL. This enables
the MMC protocol implementation and allows any enabled drivers to
be used within SPL. MMC can be used with or without disk partition
support depending on the application (SPL_LIBDISK_SUPPORT). Enable
this option to build the drivers in drivers/mmc as part of an SPL
build.
Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 15:17:30 +00:00
config SYS_MMCSD_FS_BOOT_PARTITION
int "MMC Boot Partition"
default 1
help
Partition on the MMC to load U-Boot from when the MMC is being
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
used in fs mode
Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 15:17:30 +00:00
spl: Move SPL_MMC_TINY option to appear under SPL menu The SPL_MMC_TINY implements feature-reduced MMC support on SPL, and as such, it's more consistent and convenient to find it as part of the SPL configuration. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-05-25 22:25:21 +00:00
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
depends on SPL_MMC
spl: Move SPL_MMC_TINY option to appear under SPL menu The SPL_MMC_TINY implements feature-reduced MMC support on SPL, and as such, it's more consistent and convenient to find it as part of the SPL configuration. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-05-25 22:25:21 +00:00
help
Enable MMC framework tinification support. This option is useful if
if your SPL is extremely size constrained. Heed the warning, enable
this option if and only if you know exactly what you are doing, if
you are reading this help text, you most likely have no idea :-)
The MMC framework is reduced to bare minimum to be useful. No malloc
support is needed for the MMC framework operation with this option
enabled. The framework supports exactly one MMC device and exactly
one MMC driver. The MMC driver can be adjusted to avoid any malloc
operations too, which can remove the need for malloc support in SPL
and thus further reduce footprint.
mmc: add a Kconfig option to enable the support for MMC write operations This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-04 14:23:32 +00:00
config SPL_MMC_WRITE
bool "MMC/SD/SDIO card support for write operations in SPL"
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
depends on SPL_MMC
mmc: add a Kconfig option to enable the support for MMC write operations This allows using CONFIG_IS_ENABLED(MMC_WRITE) to compile out code needed only if write support is required. The option is added for u-boot and for SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-01-04 14:23:32 +00:00
help
Enable write access to MMC and SD Cards in SPL
ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDR Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:16 +00:00
config SPL_MPC8XXX_INIT_DDR
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support MPC8XXX DDR init"
help
Enable support for DDR-SDRAM (double-data-rate synchronous dynamic
random-access memory) on the MPC8XXX family within SPL. This
allows DRAM to be set up before loading U-Boot into that DRAM,
where it can run.
config SPL_MTD_SUPPORT
bool "Support MTD drivers"
help
Enable support for MTD (Memory Technology Device) within SPL. MTD
provides a block interface over raw NAND and can also be used with
SPI flash. This allows SPL to load U-Boot from supported MTD
devices. See SPL_NAND_SUPPORT and SPL_ONENAND_SUPPORT for how
to enable specific MTD drivers.
Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEW Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:27 +00:00
config SPL_MUSB_NEW
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support new Mentor Graphics USB"
help
Enable support for Mentor Graphics USB in SPL. This is a new
driver used by some boards. Enable this option to build
the drivers in drivers/usb/musb-new as part of an SPL build. The
old drivers are in drivers/usb/musb.
config SPL_NAND_SUPPORT
bool "Support NAND flash"
help
Enable support for NAND (Negative AND) flash in SPL. NAND flash
can be used to allow SPL to load U-Boot from supported devices.
mtd: move NAND files into a raw/ subdirectory NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-16 15:30:07 +00:00
This enables the drivers in drivers/mtd/nand/raw as part of an SPL
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
build.
Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 13:09:44 +00:00
config SPL_NAND_DRIVERS
bool "Use standard NAND driver"
help
SPL uses normal NAND drivers, not minimal drivers.
config SPL_NAND_ECC
bool "Include standard software ECC in the SPL"
config SPL_NAND_SIMPLE
bool "Support simple NAND drivers in SPL"
help
Support for NAND boot using simple NAND drivers that
expose the cmd_ctrl() interface.
Convert CONFIG_SPL_NAND_BASE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 13:09:45 +00:00
config SPL_NAND_BASE
depends on SPL_NAND_DRIVERS
bool "Use Base NAND Driver"
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
help
Include nand_base.c in the SPL.
Convert CONFIG_SPL_NAND_BASE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 13:09:45 +00:00
config SPL_NAND_IDENT
depends on SPL_NAND_BASE
bool "Use chip ID to identify NAND flash"
help
SPL uses the chip ID list to identify the NAND flash.
ubispl: migrate configuration to Kconfig Move the ubispl configuration to KConfig and drop them from the whitelist. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Javier Martínez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-05-15 13:15:57 +00:00
config SPL_UBI
bool "Support UBI"
help
Enable support for loading payloads from UBI. See
README.ubispl for more info.
spl: Introduce SPL_DM_SPI Kconfig define This define indicates if DM_SPI shall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-09 10:06:46 +00:00
if SPL_DM
config SPL_DM_SPI
bool "Support SPI DM drivers in SPL"
help
Enable support for SPI DM drivers in SPL.
spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04 15:11:53 +00:00
config SPL_DM_SPI_FLASH
bool "Support SPI DM FLASH drivers in SPL"
help
Enable support for SPI DM flash drivers in SPL.
spl: Introduce SPL_DM_SPI Kconfig define This define indicates if DM_SPI shall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-09-09 10:06:46 +00:00
endif
ubispl: migrate configuration to Kconfig Move the ubispl configuration to KConfig and drop them from the whitelist. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Javier Martínez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-05-15 13:15:57 +00:00
if SPL_UBI
ubispl: add support for loading volumes by name The motivation is to use the UBI atomic volume rename functionality to allow double copy software updates on UBI. To that end the SPL is configured to always load the same volume name (e.g. "u-boot"), whereas a software updater always installs into the secondary volume "u-boot_r". After successful installation, these two volume names are switched. This extension is protected by #ifdefs as it will somewhat slow down loading of volumes by id. This is because the code needs to disable the optimization of ignoring all volume ids which are not to-be-loaded, since these can only be resolved after attaching. This adds two vtbl related functions from Linux, which are taken from the same kernel version as the current main U-Boot UBI code (Linux 4.2 64291f7db5bd8). Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com> Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-05-15 13:15:59 +00:00
config SPL_UBI_LOAD_BY_VOLNAME
bool "Support loading volumes by name"
help
This enables support for loading UBI volumes by name. When this
is set, CONFIG_SPL_UBI_LOAD_MONITOR_VOLNAME can be used to
configure the volume name from which to load U-Boot.
ubispl: migrate configuration to Kconfig Move the ubispl configuration to KConfig and drop them from the whitelist. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Javier Martínez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-05-15 13:15:57 +00:00
config SPL_UBI_MAX_VOL_LEBS
int "Maximum number of LEBs per volume"
depends on SPL_UBI
help
The maximum number of logical eraseblocks which a static volume
to load can contain. Used for sizing the scan data structure.
config SPL_UBI_MAX_PEB_SIZE
int "Maximum PEB size"
depends on SPL_UBI
help
The maximum physical erase block size.
config SPL_UBI_MAX_PEBS
int "Maximum number of PEBs"
depends on SPL_UBI
help
The maximum physical erase block size. If not overridden by
board code, this value will be used as the actual number of PEBs.
config SPL_UBI_PEB_OFFSET
int "Offset to first UBI PEB"
depends on SPL_UBI
help
The offset in number of PEBs from the start of flash to the first
PEB part of the UBI image.
config SPL_UBI_VID_OFFSET
int "Offset to VID header"
depends on SPL_UBI
config SPL_UBI_LEB_START
int "Offset to LEB in PEB"
depends on SPL_UBI
help
The offset in bytes to the LEB within a PEB.
config SPL_UBI_INFO_ADDR
hex "Address to place UBI scan info"
depends on SPL_UBI
help
Address for ubispl to place the scan info. Read README.ubispl to
determine the required size
config SPL_UBI_VOL_IDS
int "Maximum volume id"
depends on SPL_UBI
help
The maximum volume id which can be loaded. Used for sizing the
scan data structure.
config SPL_UBI_LOAD_MONITOR_ID
int "id of U-Boot volume"
depends on SPL_UBI
help
The UBI volume id from which to load U-Boot
ubispl: add support for loading volumes by name The motivation is to use the UBI atomic volume rename functionality to allow double copy software updates on UBI. To that end the SPL is configured to always load the same volume name (e.g. "u-boot"), whereas a software updater always installs into the secondary volume "u-boot_r". After successful installation, these two volume names are switched. This extension is protected by #ifdefs as it will somewhat slow down loading of volumes by id. This is because the code needs to disable the optimization of ignoring all volume ids which are not to-be-loaded, since these can only be resolved after attaching. This adds two vtbl related functions from Linux, which are taken from the same kernel version as the current main U-Boot UBI code (Linux 4.2 64291f7db5bd8). Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com> Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-05-15 13:15:59 +00:00
config SPL_UBI_LOAD_MONITOR_VOLNAME
string "volume name of U-Boot volume"
depends on SPL_UBI_LOAD_BY_VOLNAME
help
The UBI volume name from which to load U-Boot
ubispl: migrate configuration to Kconfig Move the ubispl configuration to KConfig and drop them from the whitelist. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Javier Martínez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-05-15 13:15:57 +00:00
config SPL_UBI_LOAD_KERNEL_ID
int "id of kernel volume"
depends on SPL_OS_BOOT && SPL_UBI
help
The UBI volume id from which to load the kernel
config SPL_UBI_LOAD_ARGS_ID
int "id of kernel args volume"
depends on SPL_OS_BOOT && SPL_UBI
help
The UBI volume id from which to load the device tree
ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSG This allows to silence ubi and ubispl individually. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-05-15 13:16:00 +00:00
config UBI_SPL_SILENCE_MSG
bool "silence UBI SPL messages"
help
Disable messages from UBI SPL. This leaves warnings
and errors enabled.
ubispl: migrate configuration to Kconfig Move the ubispl configuration to KConfig and drop them from the whitelist. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Javier Martínez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-05-15 13:15:57 +00:00
endif # if SPL_UBI
net: Rename SPL_NET_SUPPORT to SPL_NET Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:30 +00:00
config SPL_NET
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support networking"
help
Enable support for network devices (such as Ethernet) in SPL.
This permits SPL to load U-Boot over a network link rather than
from an on-board peripheral. Environment support is required since
the network stack uses a number of environment variables. See also
Rename SPL_ETH_SUPPORT to SPL_ETH Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:26 +00:00
SPL_ETH.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
net: Rename SPL_NET_SUPPORT to SPL_NET Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:30 +00:00
if SPL_NET
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
config SPL_NET_VCI_STRING
string "BOOTP Vendor Class Identifier string sent by SPL"
help
As defined by RFC 2132 the vendor class identifier field can be
sent by the client to identify the vendor type and configuration
of a client. This is often used in practice to allow for the DHCP
server to specify different files to load depending on if the ROM,
SPL or U-Boot itself makes the request
net: Rename SPL_NET_SUPPORT to SPL_NET Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:30 +00:00
endif # if SPL_NET
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
config SPL_NO_CPU_SUPPORT
bool "Drop CPU code in SPL"
help
This is specific to the ARM926EJ-S CPU. It disables the standard
start.S start-up code, presumably so that a replacement can be
used on that CPU. You should not enable it unless you know what
you are doing.
config SPL_NOR_SUPPORT
bool "Support NOR flash"
help
Enable support for loading U-Boot from memory-mapped NOR (Negative
OR) flash in SPL. NOR flash is slow to write but fast to read, and
a memory-mapped device makes it very easy to access. Loading from
NOR is typically achieved with just a memcpy().
SPL: Add XIP booting support Enable support for XIP (execute in place) of U-Boot or kernel image. There is no need to copy image from flash to ram if flash supports execute in place. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-05-28 19:55:11 +00:00
config SPL_XIP_SUPPORT
bool "Support XIP"
depends on SPL
help
Enable support for execute in place of U-Boot or kernel image. There
is no need to copy image from flash to ram if flash supports execute
in place. Its very useful in systems having enough flash but not
enough ram to load the image.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
config SPL_ONENAND_SUPPORT
bool "Support OneNAND flash"
help
Enable support for OneNAND (Negative AND) flash in SPL. OneNAND is
a type of NAND flash and therefore can be used to allow SPL to
load U-Boot from supported devices. This enables the drivers in
drivers/mtd/onenand as part of an SPL build.
spl: move SPL_OS_BOOT to Kconfig Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-06 05:55:15 +00:00
config SPL_OS_BOOT
bool "Activate Falcon Mode"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on !TI_SECURE_DEVICE
spl: move SPL_OS_BOOT to Kconfig Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-06 05:55:15 +00:00
help
Enable booting directly to an OS from SPL.
for more info read doc/README.falcon
spl: move SYS_OS_BASE to Kconfig Move SYS_OS_BASE to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Also migrate a4m2k] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-06 05:55:16 +00:00
if SPL_OS_BOOT
config SYS_OS_BASE
hex "addr, where OS is found"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on SPL_NOR_SUPPORT
spl: move SYS_OS_BASE to Kconfig Move SYS_OS_BASE to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Also migrate a4m2k] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-06 05:55:16 +00:00
help
Specify the address, where the OS image is found, which
gets booted.
endif # SPL_OS_BOOT
spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-30 16:39:59 +00:00
config SPL_FALCON_BOOT_MMCSD
bool "Enable Falcon boot from MMC or SD media"
depends on SPL_OS_BOOT && SPL_MMC
help
Select this if the Falcon mode OS image mode is on MMC or SD media.
config SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
hex "Falcon mode: Sector to load kernel uImage from MMC"
depends on SPL_FALCON_BOOT_MMCSD
help
When Falcon mode is used with an MMC or SD media, SPL needs to know
where to look for the kernel uImage. The image is expected to begin
at the raw MMC specified in this config.
Note that the Falcon mode image can also be a FIT, if FIT support is
enabled.
spl: Add option SPL_PAYLOAD Some legacy boards use RAW image for SPL boot. Add Kconfig option SPL_PAYLOAD to set alternative image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-06-14 21:38:48 +00:00
config SPL_PAYLOAD
string "SPL payload"
default "tpl/u-boot-with-tpl.bin" if TPL
default "u-boot.bin"
help
common: spl: Kconfig: spelling fixes Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-13 09:13:20 +00:00
Payload for SPL boot. For backward compatibility, default to
spl: Add option SPL_PAYLOAD Some legacy boards use RAW image for SPL boot. Add Kconfig option SPL_PAYLOAD to set alternative image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-06-14 21:38:48 +00:00
u-boot.bin, i.e. RAW image without any header. In case of
TPL, tpl/u-boot-with-tpl.bin. For new boards, suggest to
use u-boot.img.
spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-06 10:10:08 +00:00
config SPL_PCI
spl: Allow PCI drivers to be used in SPL Add a new Kconfig option to allow PCI drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:30 +00:00
bool "Support PCI drivers"
help
Enable support for PCI in SPL. For platforms that need PCI to boot,
or must perform some init using PCI in SPL, this provides the
necessary driver support. This enables the drivers in drivers/pci
as part of an SPL build.
pch: Rename PCH_SUPPORT to PCH Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:10 +00:00
config SPL_PCH
spl: Allow PCH drivers to be used in SPL Add an option for building Platorm Controller Hub drivers in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:33 +00:00
bool "Support PCH drivers"
help
Enable support for PCH (Platform Controller Hub) devices in SPL.
These are used to set up GPIOs and the SPI peripheral early in
boot. This enables the drivers in drivers/pch as part of an SPL
build.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
config SPL_POST_MEM_SUPPORT
bool "Support POST drivers"
help
Enable support for POST (Power-on Self Test) in SPL. POST is a
procedure that checks that the hardware (CPU or board) appears to
be functionally correctly. It is a sanity check that can be
performed before booting. This enables the drivers in post/drivers
as part of an SPL build.
reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET, so can use CONFIG_IS_ENABLED(DM_RESET) checking in reset.h later. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-14 10:45:19 +00:00
config SPL_DM_RESET
spl: add SPL_RESET_SUPPORT Add option to include RESET driver and uclass in SPL. That can be useful to handle IP reset with same driver in U-Boot and in SPL. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:05 +00:00
bool "Support reset drivers"
depends on SPL
help
Enable support for reset control in SPL.
That can be useful in SPL to handle IP reset in driver, as in U-Boot,
by using the generic reset API provided by driver model.
This enables the drivers in drivers/reset as part of an SPL build.
Rename SPL_POWER_SUPPORT to SPL_POWER Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-11 03:14:24 +00:00
config SPL_POWER
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support power drivers"
help
Enable support for power control in SPL. This includes support
for PMICs (Power-management Integrated Circuits) and some of the
features provided by PMICs. In particular, voltage regulators can
be used to enable/disable power and vary its voltage. That can be
useful in SPL to turn on boot peripherals and adjust CPU voltage
so that the clock speed can be increased. This enables the drivers
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an SPL build.
power: Add CONFIG_SPL_POWER_DOMAIN config Add CONFIG_SPL_POWER_DOMAIN config entry. Build drivers/power/domain if this config is selected. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-27 02:20:37 +00:00
config SPL_POWER_DOMAIN
bool "Support power domain drivers"
power: Refactor Makefile rules Move the power/ rules into drivers/power to avoid clutter in the Makefile and drivers/Makefile files. We must select SPL_POWER if SPL_POWER_DOMAIN is used, since the two are currently independent and boards do not necessarily enable SPL_POWER. Add a TPL_POWER as well, as that is used by one board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-08 18:20:29 +00:00
select SPL_POWER
power: Add CONFIG_SPL_POWER_DOMAIN config Add CONFIG_SPL_POWER_DOMAIN config entry. Build drivers/power/domain if this config is selected. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-27 02:20:37 +00:00
help
Enable support for power domain control in SPL. Many SoCs allow
power to be applied to or removed from portions of the SoC (power
domains). This may be used to save power. This API provides the
means to control such power management hardware. This enables
the drivers in drivers/power/domain as part of a SPL build.
spl: move RAM boot support in separate file Add a new top-level config option so support booting an image stored in RAM. This allows to move the RAM boot support into a sparate file and having a single condition to compile that file. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-12-23 06:51:53 +00:00
config SPL_RAM_SUPPORT
bool "Support booting from RAM"
rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:41 +00:00
default y if MICROBLAZE || ARCH_SOCFPGA || ARCH_TEGRA || ARCH_ZYNQ
spl: move RAM boot support in separate file Add a new top-level config option so support booting an image stored in RAM. This allows to move the RAM boot support into a sparate file and having a single condition to compile that file. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-12-23 06:51:53 +00:00
help
Enable booting of an image in RAM. The image can be preloaded or
it can be loaded by SPL directly into RAM (e.g. using USB).
Convert CONFIG_SPL_RAM_DEVICE to defconfig This converts the following to Kconfig: CONFIG_SPL_RAM_DEVICE Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-12-23 06:51:52 +00:00
config SPL_RAM_DEVICE
bool "Support booting from preloaded image in RAM"
spl: move RAM boot support in separate file Add a new top-level config option so support booting an image stored in RAM. This allows to move the RAM boot support into a sparate file and having a single condition to compile that file. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-12-23 06:51:53 +00:00
depends on SPL_RAM_SUPPORT
rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:41 +00:00
default y if MICROBLAZE || ARCH_SOCFPGA || ARCH_TEGRA || ARCH_ZYNQ
Convert CONFIG_SPL_RAM_DEVICE to defconfig This converts the following to Kconfig: CONFIG_SPL_RAM_DEVICE Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-12-23 06:51:52 +00:00
help
Enable booting of an image already loaded in RAM. The image has to
be already in memory when SPL takes over, e.g. loaded by the boot
ROM.
spl: Allow remoteproc drivers to be used within SPL Add an option for building remoteproc drivers within SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-08-27 10:27:53 +00:00
config SPL_REMOTEPROC
bool "Support REMOTEPROCS"
help
Enable support for REMOTEPROCs in SPL. This permits to load
a remote processor firmware in SPL.
rtc: Rename RTC_SUPPORT to RTC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:11 +00:00
config SPL_RTC
spl: Allow RTC drivers to be used in SPL Add a new Kconfig option to allow RTC drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-16 14:03:31 +00:00
bool "Support RTC drivers"
help
Enable RTC (Real-time Clock) support in SPL. This includes support
for reading and setting the time. Some RTC devices also have some
non-volatile (battery-backed) memory which is accessible if
needed. This enables the drivers in drivers/rtc as part of an SPL
build.
sata: Rename SATA_SUPPORT to SATA Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:17 +00:00
config SPL_SATA
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support loading from SATA"
help
Enable support for SATA (Serial AT attachment) in SPL. This allows
use of SATA devices such as hard drives and flash drivers for
loading U-Boot. SATA is used in higher-end embedded systems and
can provide higher performance than MMC , at somewhat higher
expense and power consumption. This enables loading from SATA
using a configured device.
spl: sata: support U-Boot load from raw sata disk Support load of the U-Boot image from raw SATA disk sector. This is equivalent to load from MMC raw sector. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-14 14:54:21 +00:00
config SPL_SATA_RAW_U_BOOT_USE_SECTOR
bool "SATA raw mode: by sector"
sata: Rename SATA_SUPPORT to SATA Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:17 +00:00
depends on SPL_SATA
arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:29 +00:00
default y if ARCH_MVEBU
spl: sata: support U-Boot load from raw sata disk Support load of the U-Boot image from raw SATA disk sector. This is equivalent to load from MMC raw sector. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-14 14:54:21 +00:00
help
Use sector number for specifying U-Boot location on SATA disk in
raw mode.
config SPL_SATA_RAW_U_BOOT_SECTOR
hex "Sector on the SATA disk to load U-Boot from"
depends on SPL_SATA_RAW_U_BOOT_USE_SECTOR
arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-23 09:14:29 +00:00
default 0x1 if ARCH_MVEBU
spl: sata: support U-Boot load from raw sata disk Support load of the U-Boot image from raw SATA disk sector. This is equivalent to load from MMC raw sector. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-07-14 14:54:21 +00:00
help
Sector on the SATA disk to load U-Boot from, when the SATA disk is being
used in raw mode. Units: SATA disk sectors (1 sector = 512 bytes).
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
config SPL_SERIAL
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support serial"
spl: Split sprintf, strto* from SPL serial in Kconfig When SPL serial is disabled, callers who need sprintf or strtoul fail because their inclusion is guarded by CONFIG_SPL_SERIAL_SUPPORT/ CONFIG_TPL_SERIAL_SUPPORT. Split printf, sprintf and strto into their own entries and then select all of them if SERIAL_SUPPORT is enabled to match the current behaviour. Include panic.o unconditionally as it can be called from anywhere which uses BUG_ON(). Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-19 04:32:54 +00:00
select SPL_PRINTF
select SPL_STRTO
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for serial in SPL. This allows use of a serial UART
for displaying messages while SPL is running. It also brings in
printf() and panic() functions. This should normally be enabled
unless there are space reasons not to. Even then, consider
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
enabling SPL_USE_TINY_PRINTF which is a small printf() version.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
config SPL_SPI
spl: fix SPI config dependencies As SPL_SPI_FLASH_SUPPORT cannot work without SPL_SPI_SUPPORT, fix dependencies to prevent enabling SPI flash support without basic SPI support. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-10-25 14:22:09 +00:00
bool "Support SPI drivers"
help
Enable support for using SPI in SPL. This is used for connecting
to SPI flash for loading U-Boot. See SPL_SPI_FLASH_SUPPORT for
more details on that. The SPI driver provides the transport for
data between the SPI flash and the CPU. This option can be used to
enable SPI drivers that are needed for other purposes also, such
as a SPI PMIC.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
config SPL_SPI_FLASH_SUPPORT
bool "Support SPI flash drivers"
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
depends on SPL_SPI
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for using SPI flash in SPL, and loading U-Boot from
SPI flash. SPI flash (Serial Peripheral Bus flash) is named after
the SPI bus that is used to connect it to a system. It is a simple
but fast bidirectional 4-wire bus (clock, chip select and two data
lines). This enables the drivers in drivers/mtd/spi as part of an
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
SPL build. This normally requires SPL_SPI.
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
mtd: spi: spi-nor-core: Add SFDP support Sync Serial Flash Discoverable Parameters (SFDP) parsing support from Linux. This allows auto detection and configuration of Flash parameters. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:20 +00:00
if SPL_SPI_FLASH_SUPPORT
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
config SPL_SPI_FLASH_TINY
bool "Enable low footprint SPL SPI Flash support"
depends on !SPI_FLASH_BAR
spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL SPL only needs to be able to read from SPI Flash to load next stage and does not really need write/erase etc. Therefore in order to reduce SPI Flash code size in SPL, enable SPI_FLASH_TINY, that only supports reading from SPI flash, as default. Note: Since, SPI_FLASH_TINY does not support SPI_FLASH_BAR, SPI_FLASH_TINY is not enabled for boards with SPI controllers that cannot support 4 byte addressing. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:26 +00:00
default y if SPI_FLASH
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
help
Enable lightweight SPL SPI Flash support that supports just reading
data/images from flash. No support to write/erase flash. Enable
this if you have SPL size limitations and don't need full
fledged SPI flash support.
mtd: spi: spi-nor-core: Add SFDP support Sync Serial Flash Discoverable Parameters (SFDP) parsing support from Linux. This allows auto detection and configuration of Flash parameters. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:20 +00:00
config SPL_SPI_FLASH_SFDP_SUPPORT
bool "SFDP table parsing support for SPI NOR flashes"
mtd: spi: Add lightweight SPI flash stack for SPL Add a tiny SPI flash stack that just supports reading data/images from SPI flash. This is useful for boards that have SPL size constraints and would need to use SPI flash framework just to read images/data from flash. There is approximately 1.5 to 2KB savings with this. Based on prior work of reducing spi flash id table by Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:25 +00:00
depends on !SPI_FLASH_BAR && !SPL_SPI_FLASH_TINY
mtd: spi: spi-nor-core: Add SFDP support Sync Serial Flash Discoverable Parameters (SFDP) parsing support from Linux. This allows auto detection and configuration of Flash parameters. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:20 +00:00
help
Enable support for parsing and auto discovery of parameters for
SPI NOR flashes using Serial Flash Discoverable Parameters (SFDP)
tables as per JESD216 standard in SPL.
spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04 15:11:53 +00:00
config SPL_SPI_FLASH_MTD
bool "Support for SPI flash MTD drivers in SPL"
help
Enable support for SPI flash MTD drivers in SPL.
spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:05:27 +00:00
config SPL_SPI_LOAD
bool "Support loading from SPI flash"
help
Enable support for loading next stage, U-Boot or otherwise, from
SPI NOR in U-Boot SPL.
mtd: spi: spi-nor-core: Add SFDP support Sync Serial Flash Discoverable Parameters (SFDP) parsing support from Linux. This allows auto detection and configuration of Flash parameters. Signed-off-by: Vignesh R <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-05 05:59:20 +00:00
endif # SPL_SPI_FLASH_SUPPORT
Convert CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-22 13:41:46 +00:00
config SYS_SPI_U_BOOT_OFFS
hex "address of u-boot payload in SPI flash"
sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfig For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a board choice: The boot ROM only loads the SPL from offset 0 of the SPI NOR flash, and loads at most 32KB. This is a similar situation as on MMC, so consequently we create our "joint" image (SPL + U-Boot proper) with that 32KB offset during the build. So define the value of this symbol to be 32KB by default for every Allwinner SoC. This removes the definition of this symbol from the _defconfig files, and avoids every board to define this over and over again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-06 01:29:10 +00:00
default 0x8000 if ARCH_SUNXI
Convert CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-22 13:41:46 +00:00
default 0x0
depends on SPL_SPI_LOAD || SPL_SPI_SUNXI
help
Address within SPI-Flash from where the u-boot payload is fetched
from.
thermal: ti-bandgap: Add support for temperature sensor The dra7xx series of SOCs contain a temperature sensor and an associated analog-to-digital converter (ADC) which produces an output which is proportional to the SOC temperature. Add support for this temperature sensor. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-14 10:42:31 +00:00
config SPL_THERMAL
bool "Driver support for thermal devices"
help
Enable support for temperature-sensing devices. Some SoCs have on-chip
temperature sensors to permit warnings, speed throttling or even
automatic power-off when the temperature gets too high or low. Other
devices may be discrete but connected on a suitable bus.
Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:29 +00:00
config SPL_USB_HOST
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support USB host drivers"
blk: Rework guard around part_init call The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-05 13:23:38 +00:00
select HAVE_BLOCK_DEVICE
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable access to USB (Universal Serial Bus) host devices so that
SPL can load U-Boot from a connected USB peripheral, such as a USB
flash stick. While USB takes a little longer to start up than most
buses, it is very flexible since many different types of storage
device can be attached. This option enables the drivers in
drivers/usb/host as part of an SPL build.
usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL, makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE. Everything that is not part of the usb storage support in SPL is now build under SPL_USB_HOST_SUPPORT. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-02-01 16:40:07 +00:00
config SPL_USB_STORAGE
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support loading from USB"
Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:29 +00:00
depends on SPL_USB_HOST && !(BLK && !DM_USB)
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for USB devices in SPL. This allows use of USB
devices such as hard drives and flash drivers for loading U-Boot.
The actual drivers are enabled separately using the normal U-Boot
config options. This enables loading from USB using a configured
device.
Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET The SPL option for USB gadget should be named after the option for u-boot (CONFIG_USB_GADGET) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 14:44:13 +00:00
config SPL_USB_GADGET
spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-21 18:58:53 +00:00
bool "Suppport USB Gadget drivers"
help
Enable USB Gadget API which allows to enable USB device functions
in SPL.
Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET The SPL option for USB gadget should be named after the option for u-boot (CONFIG_USB_GADGET) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 14:44:13 +00:00
if SPL_USB_GADGET
spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-21 18:58:53 +00:00
spl: Kconfig: Rename SPL_USBETH_SUPPORT to SPL_USB_ETHER to match with the U-boot CONFIG Rename CONFIG_SPL_USBETH_SUPPORT to CONFIG_SPL_USB_ETHER. This enables users to block text using CONFIG_IS_ENABLED() instead of resorting to #if ladders with SPL and non-SPL cases. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-16 15:47:44 +00:00
config SPL_USB_ETHER
spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-21 18:58:53 +00:00
bool "Support USB Ethernet drivers"
net: Move network rules to drivers/net The code under drivers/net is related to ethernet networking drivers, in some fashion or another. Drop these from the top-level Makefile and also move the phy rule into drivers/net/Makefile which is where it belongs. Make the new rule for drivers/net check for the build-stage relevant ETH symbol. Fix up some Kconfig dependencies while we're here to mirror how the Makefile logic now works. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Introduce ETH, Kconfig dependency changes, am43xx fix] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:31 +00:00
depends on SPL_NET
spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-21 18:58:53 +00:00
help
Enable access to the USB network subsystem and associated
drivers in SPL. This permits SPL to load U-Boot over a
USB-connected Ethernet link (such as a USB Ethernet dongle) rather
than from an onboard peripheral. Environment support is required
since the network stack uses a number of environment variables.
net: Rename SPL_NET_SUPPORT to SPL_NET Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:30 +00:00
See also SPL_NET and SPL_ETH.
spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-21 18:58:53 +00:00
spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-17 19:43:02 +00:00
config SPL_DFU
spl: Kconfig: Fix typo in 'Upgrade' Correct the spelling of 'Upgrade'. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-08-31 13:02:28 +00:00
bool "Support DFU (Device Firmware Upgrade)"
common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASH All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all references to CONFIG_[ST]PL_HASH_SUPPORT. This means we need for CHAIN_OF_TRUST to select SPL_HASH now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03 00:54:19 +00:00
select SPL_HASH
common: dfu: ignore reset for spl-dfu The SPL-DFU feature enable to load and execute u-boot from RAM over usb from PC using dfu-util. Hence dfu-reset should not be issued when dfu-util -R switch is issued. Signed-off-by: Ravi Babu <ravibabu@ti.com>
2017-05-04 10:15:29 +00:00
select SPL_DFU_NO_RESET
spl: Kconfig: dfu: spl-dfu depends on SPL_RAM_SUPPORT Since SPL_DFU_SUPPORT is depends on SPL_RAM_SUPPORT, hence select SPL_DFU_SUPPORT only when SPL_RAM_SUPPORT is chosen. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-04 10:15:28 +00:00
depends on SPL_RAM_SUPPORT
spl: dfu: move DFU Kconfig to SPL Kconfig The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-21 18:58:52 +00:00
help
spl: Kconfig: Fix typo in 'Upgrade' Correct the spelling of 'Upgrade'. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-08-31 13:02:28 +00:00
This feature enables the DFU (Device Firmware Upgrade) in SPL with
spl: dfu: move DFU Kconfig to SPL Kconfig The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-21 18:58:52 +00:00
RAM memory device support. The ROM code will load and execute
the SPL built with dfu. The user can load binaries (u-boot/kernel) to
selected device partition from host-pc using dfu-utils.
This feature is useful to flash the binaries to factory or bare-metal
boards using USB interface.
choice
bool "DFU device selection"
spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-17 19:43:02 +00:00
depends on SPL_DFU
spl: dfu: move DFU Kconfig to SPL Kconfig The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-21 18:58:52 +00:00
config SPL_DFU_RAM
bool "RAM device"
spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-01-17 19:43:02 +00:00
depends on SPL_DFU && SPL_RAM_SUPPORT
spl: dfu: move DFU Kconfig to SPL Kconfig The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-21 18:58:52 +00:00
help
select RAM/DDR memory device for loading binary images
(u-boot/kernel) to the selected device partition using
DFU and execute the u-boot/kernel from RAM.
endchoice
spl: add serial download protocol (SDP) support Add USB serial download protocol support to SPL. If the SoC started in recovery mode the SPL will immediately switch to SDP and wait for further downloads/commands from the host side. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-08-16 18:00:54 +00:00
config SPL_USB_SDP_SUPPORT
bool "Support SDP (Serial Download Protocol)"
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
depends on SPL_SERIAL
spl: add serial download protocol (SDP) support Add USB serial download protocol support to SPL. If the SoC started in recovery mode the SPL will immediately switch to SDP and wait for further downloads/commands from the host side. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-08-16 18:00:54 +00:00
help
Enable Serial Download Protocol (SDP) device support in SPL. This
allows to download images into memory and execute (jump to) them
using the same protocol as implemented by the i.MX family's boot ROM.
spl: sdp: Add CONFIG_SPL_SDP_USB_DEV for USB device Add a new configuration CONFIG_SPL_SDP_USB_DEV to specify the usb index for spl sdp driver, so that we change use different device. The default value is 0. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-04-29 02:35:12 +00:00
config SPL_SDP_USB_DEV
int "SDP USB controller index"
default 0
depends on SPL_USB_SDP_SUPPORT
help
Some boards have USB controller other than 0. Define this option
so it can be used in compiled environment.
spl: add USB Gadget config option Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-21 18:58:53 +00:00
endif
Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:28 +00:00
config SPL_WATCHDOG
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
bool "Support watchdog drivers"
watchdog: Split WDT from SPL_WDT Use CONFIG_IS_ENABLED(WDT) to permit use of WDT in SPL without DM, while the full U-Boot can use rich DM/DT WDT driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Suniel Mahesh <sunil.m@techveda.org>
2019-06-09 01:46:21 +00:00
imply SPL_WDT if !HW_WATCHDOG
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
Enable support for watchdog drivers in SPL. A watchdog is
typically a hardware peripheral which can reset the system when it
detects no activity for a while (such as a software crash). This
enables the drivers in drivers/watchdog as part of an SPL build.
config SPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
depends on SPL_SERIAL
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable
means of transmitting U-Boot over a serial line for using in SPL,
with a checksum to ensure correctness.
spl: rename config item SPL_ATF_SUPPORT to SPL_ATF Having CONFIG_SPL_ATF seems more natural. Rename it, while it it is easy and there's few boards that use it (only RK3399 and RK3368 boards). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-13 19:29:36 +00:00
config SPL_ATF
spl: add support to booting with ATF ATF(ARM Trusted Firmware) is used by ARM arch64 SoCs, find more infomation about ATF at: https://github.com/ARM-software/arm-trusted-firmware SPL is considered as BL2 in ATF terminology, it needs to load other parts of ATF binary like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to prepare the parameter for BL31 which including entry and image information for all other images. Then the SPL handle PC to BL31 with the parameter, the BL31 will do the rest of work and at last get into U-Boot(BL33). This patch needs work with patches from Andre for SPL support multi binary in FIT. The entry point of bl31 and bl33 are still using hard code because we still can not get them from the FIT image information. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-05 03:47:45 +00:00
bool "Support ARM Trusted Firmware"
spl: Kconfig: Record proper dependency for SPL_ATF ATF support was all the time based on FIT image support but this dependency is not recorded anywhere. For !SPL_FIT && SPL_ATF there is compilation error: common/spl/spl.c: In function 'board_init_r': common/spl/spl.c:689:26: error: 'struct spl_image_info' has no member named 'fdt_addr' 689 | spl_fixup_fdt(spl_image.fdt_addr); Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-03 09:23:39 +00:00
depends on ARM64 && SPL_FIT
spl: add support to booting with ATF ATF(ARM Trusted Firmware) is used by ARM arch64 SoCs, find more infomation about ATF at: https://github.com/ARM-software/arm-trusted-firmware SPL is considered as BL2 in ATF terminology, it needs to load other parts of ATF binary like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to prepare the parameter for BL31 which including entry and image information for all other images. Then the SPL handle PC to BL31 with the parameter, the BL31 will do the rest of work and at last get into U-Boot(BL33). This patch needs work with patches from Andre for SPL support multi binary in FIT. The entry point of bl31 and bl33 are still using hard code because we still can not get them from the FIT image information. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-05 03:47:45 +00:00
help
spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option While we expect to call a pointer to a valid FDT (or NULL) as the platform parameter to an ATF, some ATF versions are not U-Boot aware and have an insufficiently robust (or an overzealour) parameter validation: either way, this may cause a hard-stop with uncooperative ATF versions. This change adds the option to suppress passing a platform parameter and will always pass NULL. Debug output from ATF w/ this option disabled (i.e. default): INFO: plat_param_from_bl2: 0x291450 Debug output from ATF w/ this option enabled: INFO: plat_param_from_bl2: 0 Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-01-02 20:16:43 +00:00
ATF(ARM Trusted Firmware) is a component for ARM AArch64 which
is loaded by SPL (which is considered as BL2 in ATF terminology).
spl: add support to booting with ATF ATF(ARM Trusted Firmware) is used by ARM arch64 SoCs, find more infomation about ATF at: https://github.com/ARM-software/arm-trusted-firmware SPL is considered as BL2 in ATF terminology, it needs to load other parts of ATF binary like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to prepare the parameter for BL31 which including entry and image information for all other images. Then the SPL handle PC to BL31 with the parameter, the BL31 will do the rest of work and at last get into U-Boot(BL33). This patch needs work with patches from Andre for SPL support multi binary in FIT. The entry point of bl31 and bl33 are still using hard code because we still can not get them from the FIT image information. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-05 03:47:45 +00:00
More detail at: https://github.com/ARM-software/arm-trusted-firmware
spl: atf: add support for LOAD_IMAGE_V2 Newer platforms use the LOAD_IMAGE_V2 parameter passing method. Add support for it. Signed-off-by: Michael Walle <michael@walle.cc>
2020-11-18 16:45:58 +00:00
config SPL_ATF_LOAD_IMAGE_V2
bool "Use the new LOAD_IMAGE_V2 parameter passing"
depends on SPL_ATF
help
Some platforms use the newer LOAD_IMAGE_V2 parameter passing.
If you want to load a bl31 image from the SPL and need the new
method, say Y.
spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option While we expect to call a pointer to a valid FDT (or NULL) as the platform parameter to an ATF, some ATF versions are not U-Boot aware and have an insufficiently robust (or an overzealour) parameter validation: either way, this may cause a hard-stop with uncooperative ATF versions. This change adds the option to suppress passing a platform parameter and will always pass NULL. Debug output from ATF w/ this option disabled (i.e. default): INFO: plat_param_from_bl2: 0x291450 Debug output from ATF w/ this option enabled: INFO: plat_param_from_bl2: 0 Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-01-02 20:16:43 +00:00
config SPL_ATF_NO_PLATFORM_PARAM
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
bool "Pass no platform parameter"
spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option While we expect to call a pointer to a valid FDT (or NULL) as the platform parameter to an ATF, some ATF versions are not U-Boot aware and have an insufficiently robust (or an overzealour) parameter validation: either way, this may cause a hard-stop with uncooperative ATF versions. This change adds the option to suppress passing a platform parameter and will always pass NULL. Debug output from ATF w/ this option disabled (i.e. default): INFO: plat_param_from_bl2: 0x291450 Debug output from ATF w/ this option enabled: INFO: plat_param_from_bl2: 0 Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-01-02 20:16:43 +00:00
depends on SPL_ATF
help
While we expect to call a pointer to a valid FDT (or NULL)
as the platform parameter to an ATF, some ATF versions are
not U-Boot aware and have an insufficiently robust parameter
validation to gracefully reject a FDT being passed.
If this option is enabled, the spl_atf os-type handler will
always pass NULL for the platform parameter.
If your ATF is affected, say Y.
Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC This converts CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-03-15 22:11:46 +00:00
config SPL_AM33XX_ENABLE_RTC32K_OSC
bool "Enable the RTC32K OSC on AM33xx based platforms"
default y if AM33XX
help
Enable access to the AM33xx RTC and select the external 32kHz clock
source.
lib: optee: remove the duplicate CONFIG_OPTEE The configuration CONFIG_OPTEE is defined 2 times: 1- in lib/optee/Kconfig for support of OPTEE images loaded by bootm command 2- in drivers/tee/optee/Kconfig for support of OP-TEE driver. It is abnormal to have the same CONFIG define for 2 purpose; and it is difficult to managed correctly their dependencies. Moreover CONFIG_SPL_OPTEE is defined in common/spl/Kconfig to manage OPTEE image load in SPL. This definition causes an issue with the macro CONFIG_IS_ENABLED(OPTEE) to test the availability of the OP-TEE driver. This patch cleans the configuration dependency with: - CONFIG_OPTEE_IMAGE (renamed) => support of OP-TEE image in U-Boot - CONFIG_SPL_OPTEE_IMAGE (renamed) => support of OP-TEE image in SPL - CONFIG_OPTEE (same) => support of OP-TEE driver in U-Boot - CONFIG_OPTEE_LIB (new) => support of OP-TEE library After this patch, the macro have the correct behavior: - CONFIG_IS_ENABLED(OPTEE_IMAGE) => Load of OP-TEE image is supported - CONFIG_IS_ENABLED(OPTEE) => OP-TEE driver is supported Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-09-02 09:56:16 +00:00
config SPL_OPTEE_IMAGE
bool "Support OP-TEE Trusted OS image in SPL"
spl: add support to booting with OP-TEE OP-TEE is an open source trusted OS, in armv7, its loading and running are like this: loading: - SPL load both OP-TEE and U-Boot running: - SPL run into OP-TEE in secure mode; - OP-TEE run into U-Boot in non-secure mode; To make code simple, it would be fine to use IH_OS_TEE for the os tyle in TPL(just like IH_OS_LINUX is using both in SPL and U-Boot). Here is the diagram for SPL loading OP-TEE, IH_OS_TEE:(make u-boot.itb for SPL) Non-Secure Secure BootROM | v SPL | v --------- OP-TEE | v U-Boot | V Linux For other two king of OP-TEE loading/booting, see commit message: 45b55712d4 image: Add IH_OS_TEE for TEE chain-load boot More detail: https://github.com/OP-TEE/optee_os and search for 'boot arguments' for detail entry parameter in: core/arch/arm/kernel/generic_entry_a32.S Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-23 09:17:59 +00:00
depends on ARM
help
lib: optee: remove the duplicate CONFIG_OPTEE The configuration CONFIG_OPTEE is defined 2 times: 1- in lib/optee/Kconfig for support of OPTEE images loaded by bootm command 2- in drivers/tee/optee/Kconfig for support of OP-TEE driver. It is abnormal to have the same CONFIG define for 2 purpose; and it is difficult to managed correctly their dependencies. Moreover CONFIG_SPL_OPTEE is defined in common/spl/Kconfig to manage OPTEE image load in SPL. This definition causes an issue with the macro CONFIG_IS_ENABLED(OPTEE) to test the availability of the OP-TEE driver. This patch cleans the configuration dependency with: - CONFIG_OPTEE_IMAGE (renamed) => support of OP-TEE image in U-Boot - CONFIG_SPL_OPTEE_IMAGE (renamed) => support of OP-TEE image in SPL - CONFIG_OPTEE (same) => support of OP-TEE driver in U-Boot - CONFIG_OPTEE_LIB (new) => support of OP-TEE library After this patch, the macro have the correct behavior: - CONFIG_IS_ENABLED(OPTEE_IMAGE) => Load of OP-TEE image is supported - CONFIG_IS_ENABLED(OPTEE) => OP-TEE driver is supported Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-09-02 09:56:16 +00:00
OP-TEE is an open source Trusted OS which is loaded by SPL.
spl: add support to booting with OP-TEE OP-TEE is an open source trusted OS, in armv7, its loading and running are like this: loading: - SPL load both OP-TEE and U-Boot running: - SPL run into OP-TEE in secure mode; - OP-TEE run into U-Boot in non-secure mode; To make code simple, it would be fine to use IH_OS_TEE for the os tyle in TPL(just like IH_OS_LINUX is using both in SPL and U-Boot). Here is the diagram for SPL loading OP-TEE, IH_OS_TEE:(make u-boot.itb for SPL) Non-Secure Secure BootROM | v SPL | v --------- OP-TEE | v U-Boot | V Linux For other two king of OP-TEE loading/booting, see commit message: 45b55712d4 image: Add IH_OS_TEE for TEE chain-load boot More detail: https://github.com/OP-TEE/optee_os and search for 'boot arguments' for detail entry parameter in: core/arch/arm/kernel/generic_entry_a32.S Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-23 09:17:59 +00:00
More detail at: https://github.com/OP-TEE/optee_os
spl: support booting via RISC-V OpenSBI RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor Binary Interface (SBI) specification. It is required by Linux and U-Boot running in supervisor mode. This patch adds support for booting via the OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher. In this configuration, U-Boot SPL starts in machine mode. After loading OpenSBI and U-Boot proper, it will start OpenSBI. All necessary parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot proper is started in supervisor mode by OpenSBI. Support for OpenSBI is enabled with CONFIG_SPL_OPENSBI. An additional configuration entry, CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the OpenSBI firmware binary. It is not used directly in U-Boot and instead is intended to make the value available to scripts such as FIT configuration generators. The header file include/opensbi.h is based on header files from the OpenSBI project. They are recent, as of commit bae54f764570 ("firmware: Add fw_dynamic firmware"). Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-21 19:14:44 +00:00
config SPL_OPENSBI
bool "Support RISC-V OpenSBI"
depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE
help
OpenSBI is an open-source implementation of the RISC-V Supervisor Binary
Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC
firmware. It is loaded and started by U-Boot SPL.
More details are available at https://github.com/riscv/opensbi and
https://github.com/riscv/riscv-sbi-doc
config SPL_OPENSBI_LOAD_ADDR
hex "OpenSBI load address"
depends on SPL_OPENSBI
help
Load address of the OpenSBI binary.
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
config TPL
bool
depends on SUPPORT_TPL
prompt "Enable TPL"
help
If you want to build TPL as well as the normal image and SPL, say Y.
if TPL
spl: Add a size check for TPL We have the ability to enforce a maximum size for SPL but not yet for TPL. Add a new option for this. Document the size check macro while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-21 03:31:52 +00:00
config TPL_SIZE_LIMIT
hex "Maximum size of TPL image"
depends on TPL
Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMIT CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but there are still places that reference integer values. Change those to hex as well. Also, update the Makefile to check for 0x0 instead of 0. This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT is set by menuconfig to 0x0: ... spl/u-boot-spl.bin exceeds file size limit: limit: 0 bytes actual: 0x80f0 bytes excess: 0x80f0 bytes Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-25 18:12:56 +00:00
default 0x0
spl: Add a size check for TPL We have the ability to enforce a maximum size for SPL but not yet for TPL. Add a new option for this. Document the size check macro while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-21 03:31:52 +00:00
help
Specifies the maximum length of the U-Boot TPL image.
If this value is zero, it is ignored.
spl: Allow disabling binman symbols in SPL When CONFIG_SPL_FIT is enabled we do not access U-Boot directly in the image, since it is embedded in a FIT which is parsed at runtime. Provide a CONFIG option to drop the symbols in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-08 18:49:48 +00:00
config TPL_BINMAN_SYMBOLS
bool "Declare binman symbols in SPL"
depends on SPL_FRAMEWORK && BINMAN
default y
help
This enables use of symbols in TPL which refer to U-Boot, enabling SPL
to obtain the location of U-Boot simply by calling spl_get_image_pos()
and spl_get_image_size().
For this to work, you must have a U-Boot image in the binman image, so
binman can update SPL with the location of it.
spl: separate SPL_FRAMEWORK config for spl and tpl Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all cases, making the TPL bigger. There may be cases where the TPL is really size constrained due to its underlying ram size. Therefore introduce a new TPL_FRAMEWORK option and make the relevant conditionals check for both. The default is set to "y if SPL_FRAMEWORK" to mimic the previous behaviour where the TPL would always get the SPL framework if it was enabled in SPL. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-16 08:12:02 +00:00
config TPL_FRAMEWORK
bool "Support TPL based upon the common SPL framework"
default y if SPL_FRAMEWORK
help
Enable the SPL framework under common/spl/ for TPL builds.
This framework supports MMC, NAND and YMODEM and other methods
loading of U-Boot's SPL stage. If unsure, say Y.
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:44:09 +00:00
config TPL_HANDOFF
bool "Pass hand-off information from TPL to SPL and U-Boot proper"
spl: handoff: Correct Kconfig condition for SPL and TPL At present these options can be enabled when bloblist is not enabled for SPL or TPL. This is incorrect as SPL handoff requires bloblist. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:11:17 +00:00
depends on HANDOFF && TPL_BLOBLIST
spl: Add support for passing handoff info to U-Boot proper There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:44:09 +00:00
default y
help
This option enables TPL to write handoff information. This can be
used to pass information like the size of SDRAM from TPL to U-Boot
proper. The information is also available to SPL if it is useful
there.
spl: use different BOARD_INIT MACRO for spl and tpl SPL and TPL may not always need spl_board_init() at the same time. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-20 10:00:26 +00:00
config TPL_BOARD_INIT
bool "Call board-specific initialization in TPL"
help
If this option is enabled, U-Boot will call the function
spl_board_init() from board_init_r(). This function should be
provided by the board.
bootcount: allow to use this feature on TPL This commit add an option TPL_BOOTCOUNT_LIMIT to use bootcount on TPL. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-11 18:56:47 +00:00
config TPL_BOOTCOUNT_LIMIT
bool "Support bootcount in TPL"
depends on TPL_ENV_SUPPORT
help
If this option is enabled, the TPL will support bootcount.
For example, it may be useful to choose the device to boot.
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
config TPL_LDSCRIPT
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
string "Linker script for the TPL stage"
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
depends on TPL
linker: Modify linker scripts to be more generic Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE. This lets us re-use the same script for both SPL and TPL. Add logic to scripts/Makefile.spl to pass in the right value when preprocessing the script. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-22 22:09:26 +00:00
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries The default SPL / TPL linker script is in the $(ARCH) directory. The way we use this today works but isn't ideal. With an update to Kconfig to re-sync with the Linux Kernel, we need to escape the '$' here so that it will end up being evaluated by make. Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-11 22:11:11 +00:00
default "arch/\$(ARCH)/cpu/u-boot-spl.lds"
spl: Kconfig: migrate $(SPL_TPL_)LDSCRIPT to Kconfig Now that we have split up SPL_LDSCRIPT into a SPL and TPL variant and have started to use the TPL-variant for the RK3368, it's time to clean up behind ourselves: move both variants into Kconfig and remove them from the whitelist. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 17:20:49 +00:00
help
The TPL stage will usually require a different linker-script
(as it runs from a different memory region) than the regular
U-Boot stage. Set this to the path of the linker-script to
be used for TPL.
spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:02:34 +00:00
May be left empty to trigger the Makefile infrastructure to
fall back to the linker-script used for the SPL stage.
config TPL_NEEDS_SEPARATE_STACK
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
bool "TPL needs a separate initial stack-pointer"
spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:02:34 +00:00
depends on TPL
help
Enable, if the TPL stage should not inherit its initial
stack-pointer from the settings for the SPL stage.
power: Refactor Makefile rules Move the power/ rules into drivers/power to avoid clutter in the Makefile and drivers/Makefile files. We must select SPL_POWER if SPL_POWER_DOMAIN is used, since the two are currently independent and boards do not necessarily enable SPL_POWER. Add a TPL_POWER as well, as that is used by one board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-08 18:20:29 +00:00
config TPL_POWER
bool "Support power drivers"
help
Enable support for power control in TPL. This includes support
for PMICs (Power-management Integrated Circuits) and some of the
features provided by PMICs. In particular, voltage regulators can
be used to enable/disable power and vary its voltage. That can be
useful in TPL to turn on boot peripherals and adjust CPU voltage
so that the clock speed can be increased. This enables the drivers
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an TPL build.
spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:02:34 +00:00
config TPL_TEXT_BASE
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
hex "Base address for the .text section of the TPL stage"
spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:02:34 +00:00
help
The base address for the .text section of the TPL stage.
config TPL_MAX_SIZE
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
int "Maximum size (in bytes) for the TPL stage"
moveconfig: migrate TPL_STACK, TPL_TEXT_BASE and TPL_MAX_SIZE We can finally drop TPL_STACK, TPL_TEXT_BASE and TPL_MAX_SIZE off the whitelist (this time it's really happening!) and migrate the setting (only used on the RK3368-uQ7 so far) into Kconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:20:41 +00:00
default 0
spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:02:34 +00:00
depends on TPL
help
The maximum size (in bytes) of the TPL stage.
config TPL_STACK
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
hex "Address of the initial stack-pointer for the TPL stage"
spl: support TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE via Kconfig Let's clean up behind ourselves and move the (newly defined) TPL_STACK, TPL_MAX_SIZE and TPL_TEXT_BASE into Kconfig. Given that 0x0 might be considered to be valid values for TPL_TEXT_BASE and TPL_STACK, we need to introduce helper config options ("TPL_NEEDS_SEPARATE_...") to indicate that these symbols are used (and not inherited from their SPL variants) for any given target-platform. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 18:02:34 +00:00
depends on TPL_NEEDS_SEPARATE_STACK
help
The address of the initial stack-pointer for the TPL stage.
Usually this will be the (aligned) top-of-stack.
dm: core: Add an option to support SPL in read-only memory Some systems (e.g. x86 APL) run SPL from read-only memory. The device instances created by dtoc are therefore not writeable. To make things work we would need to copy the devices to read/write memory. To avoid this, add an option to use a separate runtime struct for devices, just as is done for drivers. This can be used to hold information that changes at runtime, avoiding the need for a copy. Also add a Kconfig option for read-only SPL, which selects this feature. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15 04:25:35 +00:00
config TPL_READ_ONLY
bool
depends on TPL_OF_PLATDATA
select TPL_OF_PLATDATA_NO_BIND
select TPL_OF_PLATDATA_RT
help
Some platforms (e.g. x86 Apollo Lake) load SPL into a read-only
section of memory. This means that of-platdata must make a copy (in
writeable memory) of anything it wants to modify, such as
device-private data.
spl: configure 'return to bootrom' separately for SPL and TPL On the RK3368, we want our TPL to use the 'return to bootrom' boot method (to have the bootrom load up the SPL stage) and then continue with different boot methods (MMC, SPI, etc.) from SPL. This adds the config option needed to control the availabily of the 'return to bootrom' boot-method separately for the TPL stage. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 12:24:53 +00:00
config TPL_BOOTROM_SUPPORT
spl: Kconfig: Use tabs instead of space for alignment A lot of entries were using spaces instead of tab for alignment that's why it is good to fix it to use the same style everywhere. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-20 11:08:44 +00:00
bool "Support returning to the BOOTROM (from TPL)"
spl: configure 'return to bootrom' separately for SPL and TPL On the RK3368, we want our TPL to use the 'return to bootrom' boot method (to have the bootrom load up the SPL stage) and then continue with different boot methods (MMC, SPI, etc.) from SPL. This adds the config option needed to control the availabily of the 'return to bootrom' boot-method separately for the TPL stage. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 12:24:53 +00:00
help
Some platforms (e.g. the Rockchip RK3368) provide support in their
ROM for loading the next boot-stage after performing basic setup
from the TPL stage.
Enable this option, to return to the BOOTROM through the
BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the
boot device list, if not implemented for a given board)
image: Use the correct checks for CRC32 Add a host Kconfig for CRC32. With this we can use CONFIG_IS_ENABLED(CRC32) directly in the host build, so drop the unnecessary indirection. Add a few more conditions to SPL_CRC32 to avoid build failures as well as TPL_CRC32. Also update hash.c to make crc32 optional and to actually take notice of SPL_CRC32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-26 01:43:24 +00:00
config TPL_CRC32
bool "Support CRC32 in TPL"
default y if TPL_ENV_SUPPORT || TPL_BLOBLIST
help
Enable this to support CRC32 in uImages or FIT images within SPL.
This is a 32-bit checksum value that can be used to verify images.
For FIT images, this is the least secure type of checksum, suitable
for detected accidental image corruption. For secure applications you
should consider SHA1 or SHA256.
Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:31 +00:00
config TPL_DRIVERS_MISC
spl: add TPL_DRIVER_MISC_SUPPORT option This adds the TPL_DRIVER_MISC_SUPPORT option to allow activation of DRIVER_MISC_SUPPORT for devices that need it in the TPL stage. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-04 12:27:02 +00:00
bool "Support misc drivers in TPL"
help
Enable miscellaneous drivers in TPL. These drivers perform various
tasks that don't fall nicely into other categories, Enable this
option to build the drivers in drivers/misc as part of an TPL
build, for those that support building in TPL (not all drivers do).
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
config TPL_ENV_SUPPORT
bool "Support an environment"
help
Enable environment support in TPL. See SPL_ENV_SUPPORT for details.
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
config TPL_GPIO
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
bool "Support GPIO in TPL"
help
Enable support for GPIOs (General-purpose Input/Output) in TPL.
GPIOs allow U-Boot to read the state of an input line (high or
low) and set the state of an output line. This can be used to
drive LEDs, control power to various system parts and read user
input. GPIOs can be useful in TPL to enable a 'sign-of-life' LED,
for example. Enable this option to build the drivers in
drivers/gpio as part of an TPL build.
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
config TPL_I2C
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
bool "Support I2C"
help
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
Enable support for the I2C bus in TPL. See SPL_I2C for
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
details.
config TPL_LIBCOMMON_SUPPORT
bool "Support common libraries"
help
Enable support for common U-Boot libraries within TPL. See
SPL_LIBCOMMON_SUPPORT for details.
config TPL_LIBGENERIC_SUPPORT
bool "Support generic libraries"
help
Enable support for generic U-Boot libraries within TPL. See
SPL_LIBGENERIC_SUPPORT for details.
ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDR Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:16 +00:00
config TPL_MPC8XXX_INIT_DDR
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
bool "Support MPC8XXX DDR init"
help
Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See
ppc: Rename MPC8XXX_INIT_DDR_SUPPORT to MPC8XXX_INIT_DDR Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:16 +00:00
SPL_MPC8XXX_INIT_DDR for details.
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
config TPL_MMC
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
bool "Support MMC"
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
depends on MMC
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
help
mmc: Rename MMC_SUPPORT to MMC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-08 18:20:09 +00:00
Enable support for MMC within TPL. See SPL_MMC for details.
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
config TPL_NAND_SUPPORT
bool "Support NAND flash"
help
spl: dm: Kconfig: fix help text for SPL/TPL confusion TPL_NAND_SUPPORT, TPL_SERIAL_SUPPORT, TPL_SPI_FLASH_SUPPORT and TPL_SPI_SUPPORT refer to SPL in their help text. This fixes up the description to correctly reference TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 15:03:03 +00:00
Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details.
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-06 10:10:08 +00:00
config TPL_PCI
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
bool "Support PCI drivers"
help
Enable support for PCI in TPL. For platforms that need PCI to boot,
or must perform some init using PCI in SPL, this provides the
necessary driver support. This enables the drivers in drivers/pci
as part of a TPL build.
pch: Rename PCH_SUPPORT to PCH Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:10 +00:00
config TPL_PCH
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
bool "Support PCH drivers"
help
Enable support for PCH (Platform Controller Hub) devices in TPL.
These are used to set up GPIOs and the SPI peripheral early in
boot. This enables the drivers in drivers/pch as part of a TPL
build.
spl: ram: Add TPL Kconfig symbols Add TPL config symbols for RAM loading matching the SPL ones. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 15:03:45 +00:00
config TPL_RAM_SUPPORT
bool "Support booting from RAM"
help
Enable booting of an image in RAM. The image can be preloaded or
it can be loaded by TPL directly into RAM (e.g. using USB).
config TPL_RAM_DEVICE
bool "Support booting from preloaded image in RAM"
depends on TPL_RAM_SUPPORT
help
Enable booting of an image already loaded in RAM. The image has to
be already in memory when TPL takes over, e.g. loaded by the boot
ROM.
rtc: Rename RTC_SUPPORT to RTC Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:11 +00:00
config TPL_RTC
spl: Support hash, input, pch, pci, rtc, tpm in SPL At present these subsystems are only supported in U-Boot proper but it is sometimes necessary to support them in SPL, or even TPL. Update the Kconfig and Makefile to support this. Also adjust GPIO so that it can be used in TPL if required. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:55 +00:00
bool "Support RTC drivers"
help
Enable RTC (Real-time Clock) support in TPL. This includes support
for reading and setting the time. Some RTC devices also have some
non-volatile (battery-backed) memory which is accessible if
needed. This enables the drivers in drivers/rtc as part of an TPL
build.
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
config TPL_SERIAL
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
bool "Support serial"
spl: Split sprintf, strto* from SPL serial in Kconfig When SPL serial is disabled, callers who need sprintf or strtoul fail because their inclusion is guarded by CONFIG_SPL_SERIAL_SUPPORT/ CONFIG_TPL_SERIAL_SUPPORT. Split printf, sprintf and strto into their own entries and then select all of them if SERIAL_SUPPORT is enabled to match the current behaviour. Include panic.o unconditionally as it can be called from anywhere which uses BUG_ON(). Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-19 04:32:54 +00:00
select TPL_PRINTF
select TPL_STRTO
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
help
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
Enable support for serial in TPL. See SPL_SERIAL for
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
details.
config TPL_SPI_FLASH_SUPPORT
bool "Support SPI flash drivers"
help
spl: dm: Kconfig: fix help text for SPL/TPL confusion TPL_NAND_SUPPORT, TPL_SERIAL_SUPPORT, TPL_SPI_FLASH_SUPPORT and TPL_SPI_SUPPORT refer to SPL in their help text. This fixes up the description to correctly reference TPL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-28 15:03:03 +00:00
Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
for details.
spi: Allow separate control of SPI_FLASH_TINY for SPL/TPL In some cases SPL needs to be able to erase but TPL just needs to read. Allow these to have separate settings for SPI_FLASH_TINY. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-19 16:15:31 +00:00
config TPL_SPI_FLASH_TINY
bool "Enable low footprint TPL SPI Flash support"
depends on TPL_SPI_FLASH_SUPPORT && !SPI_FLASH_BAR
default y if SPI_FLASH
help
Enable lightweight TPL SPI Flash support that supports just reading
data/images from flash. No support to write/erase flash. Enable
this if you have TPL size limitations and don't need full-fledged
SPI flash support.
tpl: spi: Add CONFIG_TPL_SPI_LOAD to Kconfig Add Kconfig entry for CONFIG_TPL_SPI_LOAD symbol to match the SPL one. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:05:46 +00:00
config TPL_SPI_LOAD
bool "Support loading from SPI flash"
depends on TPL_SPI_FLASH_SUPPORT
help
Enable support for loading next stage, U-Boot or otherwise, from
SPI NOR in U-Boot TPL.
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
config TPL_SPI
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
bool "Support SPI drivers"
help
spi: Rename SPI_SUPPORT to SPI Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:14 +00:00
Enable support for using SPI in TPL. See SPL_SPI for
Kconfig: tpl: Add some TPL support options to Kconfig Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:27 +00:00
details.
spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* This change allows more fine tuning of driver model based SPI support in SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI support in SPL and TPL via Kconfig option. Before this change it was necessary to use: /* SPI Flash Configs */ #if defined(CONFIG_SPL_BUILD) #undef CONFIG_DM_SPI #undef CONFIG_DM_SPI_FLASH #undef CONFIG_SPI_FLASH_MTD #endif in the ./include/configs/<board>.h, which is error prone and shall be avoided when we strive to switch to Kconfig. The goal of this patch: Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL). Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must still support non DM driver. Another use case is the conversion of non DM/DTS SPI driver to support DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the distinction is needed in Kconfig (also if SPL version of the driver supports OF_PLATDATA). In the end of the day one would have to support following use cases (in single driver file - e.g. mxs_spi.c): - U-Boot proper driver supporting DT/DTS - U-Boot proper driver without DT/DTS support (deprecated) - SPL driver without DT/DTS support - SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to run full blown DT/DTS) - SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained environment with no fitImage and OF_LIBFDT support). Some boards do require SPI support (with DM) in SPL (TPL) and some only have DM_SPI{_FLASH} defined to allow compiling SPL. This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI) and provides corresponding defines in Kconfig. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [trini: Fixup a few platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-04 15:11:53 +00:00
config TPL_DM_SPI
bool "Support SPI DM drivers in TPL"
help
Enable support for SPI DM drivers in TPL.
config TPL_DM_SPI_FLASH
bool "Support SPI DM FLASH drivers in TPL"
help
Enable support for SPI DM flash drivers in TPL.
tpl: ymodem: Add CONFIG_TPL_YMODEM_SUPPORT to Kconfig Add Kconfig entry for CONFIG_TPL_YMODEM_SUPPORT symbol to match the SPL one. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:06:11 +00:00
config TPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
serial: Rename SERIAL_SUPPORT to SERIAL Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-08 18:20:12 +00:00
depends on TPL_SERIAL
tpl: ymodem: Add CONFIG_TPL_YMODEM_SUPPORT to Kconfig Add Kconfig entry for CONFIG_TPL_YMODEM_SUPPORT symbol to match the SPL one. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-07 14:06:11 +00:00
help
While loading from serial is slow it can be a useful backup when
there is no other option. The Ymodem protocol provides a reliable
means of transmitting U-Boot over a serial line for using in TPL,
with a checksum to ensure correctness.
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
endif # TPL
spl: at91: add support for SPL_AT91_MCK_BYPASS By default the configuration of the PMC is to have an external crystal connected that requires driving on both XIN and XOUT pins. The bypass configuration means that only XIN will be used, the SoC will not do any driving, and the XIN needs to be provided with a proper signal. This is the MOSCXTBY bit in the PMC main clock generator register. The SPL needs to properly initialize the PMC registers before switching to external clock signal and raising the clock to the cruise speed. Also created Kconfig for this specific configuration. By default this is disabled. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-05-24 06:38:10 +00:00
config SPL_AT91_MCK_BYPASS
bool "Use external clock signal as a source of main clock for AT91 platforms"
depends on ARCH_AT91
help
Use external 8 to 24 Mhz clock signal as source of main clock instead
of an external crystal oscillator.
This option disables the internal driving on the XOUT pin.
The external source has to provide a stable clock on the XIN pin.
If this option is disabled, the SoC expects a crystal oscillator
that needs driving on both XIN and XOUT lines.
common/spl/Kconfig: Use 'if SPL' / 'if TPL' guards Much of the entries here simply depend on SPL (or TPL). Instead of this redundancy use if SPL / if TPL to guard the rest of the choices and only show them when we have the relevant option enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-22 19:21:57 +00:00
endif # SPL
Kconfig: spl: Add SPL support options to Kconfig There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 13:05:23 +00:00
endmenu
Reference in a new issue Copy permalink