# Objective
I'm adopting #9122 and pulling some of the non controversial changes out
to make the final pr easier to review.
This pr removes the NonSend resource usage from `bevy_log`.
## Solution
`tracing-chrome` uses a guard that is stored in the world, so that when
it is dropped the json log file is written out. The guard is Send +
!Sync, so we can store it in a SyncCell to hold it in a regular resource
instead of using a non send resource.
## Testing
Tested by running an example with `-F tracing chrome` and making sure
there weren't any errors and the json file was created.
---
## Changelog
- replaced `bevy_log`'s usage of a non send resource.
# Objective
Since `align` was introduced, it has been reworked to allow the input of
`Dir3` instead of `Vec3`, and we also introduced random sampling for
points on a sphere and then for `Dir3`. Previously, this example rolled
its own random generation, but it doesn't need to any more.
## Solution
Refactor the 'align' example to use `Dir3` instead of `Vec3`, using the
`bevy_math` API for random directions.
Switched the return type from `Vec3` to `Dir3` for directional axis
methods within the `GlobalTransform` component.
## Migration Guide
The `GlobalTransform` component's directional axis methods (e.g.,
`right()`, `left()`, `up()`, `down()`, `back()`, `forward()`) have been
updated from returning `Vec3` to `Dir3`.
# Objective
Fixes#12966
## Solution
Renaming multi_threaded feature to match snake case
## Migration Guide
Bevy feature multi-threaded should be refered to multi_threaded from now
on.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.20.10
to 1.21.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.21.0</h2>
<h2>[1.21.0] - 2024-04-30</h2>
<h3>Fixes</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/956">April
2024</a> changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.21.0] - 2024-04-30</h2>
<h3>Fixes</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/956">April
2024</a> changes</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="d503507db9"><code>d503507</code></a>
chore: Release</li>
<li><a
href="b57a417c99"><code>b57a417</code></a>
chore: Release</li>
<li><a
href="82a3621e90"><code>82a3621</code></a>
chore(ci): Fix a bad merge</li>
<li><a
href="0fef712c2a"><code>0fef712</code></a>
docs: Update changelog</li>
<li><a
href="5aeb9bf914"><code>5aeb9bf</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1008">#1008</a>
from epage/april</li>
<li><a
href="3f19efbe83"><code>3f19efb</code></a>
chore(deps): Update Rust Stable to v1.77 (<a
href="https://redirect.github.com/crate-ci/typos/issues/1006">#1006</a>)</li>
<li><a
href="7d6e6a1c37"><code>7d6e6a1</code></a>
fix(dict): April updates</li>
<li><a
href="919912762c"><code>9199127</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1005">#1005</a>
from epage/template</li>
<li><a
href="b6c895ea49"><code>b6c895e</code></a>
chore: Update from _rust/main template</li>
<li><a
href="51de731521"><code>51de731</code></a>
chore(ci): Lint clippy::items_after_statements seems too strict</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.20.10...v1.21.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Clearcoat is a separate material layer that represents a thin
translucent layer of a material. Examples include (from the [Filament
spec]) car paint, soda cans, and lacquered wood. This commit implements
support for clearcoat following the Filament and Khronos specifications,
marking the beginnings of support for multiple PBR layers in Bevy.
The [`KHR_materials_clearcoat`] specification describes the clearcoat
support in glTF. In Blender, applying a clearcoat to the Principled BSDF
node causes the clearcoat settings to be exported via this extension. As
of this commit, Bevy parses and reads the extension data when present in
glTF. Note that the `gltf` crate has no support for
`KHR_materials_clearcoat`; this patch therefore implements the JSON
semantics manually.
Clearcoat is integrated with `StandardMaterial`, but the code is behind
a series of `#ifdef`s that only activate when clearcoat is present.
Additionally, the `pbr_feature_layer_material_textures` Cargo feature
must be active in order to enable support for clearcoat factor maps,
clearcoat roughness maps, and clearcoat normal maps. This approach
mirrors the same pattern used by the existing transmission feature and
exists to avoid running out of texture bindings on platforms like WebGL
and WebGPU. Note that constant clearcoat factors and roughness values
*are* supported in the browser; only the relatively-less-common maps are
disabled on those platforms.
This patch refactors the lighting code in `StandardMaterial`
significantly in order to better support multiple layers in a natural
way. That code was due for a refactor in any case, so this is a nice
improvement.
A new demo, `clearcoat`, has been added. It's based on [the
corresponding three.js demo], but all the assets (aside from the skybox
and environment map) are my original work.
[Filament spec]:
https://google.github.io/filament/Filament.html#materialsystem/clearcoatmodel
[`KHR_materials_clearcoat`]:
https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_clearcoat/README.md
[the corresponding three.js demo]:
https://threejs.org/examples/webgl_materials_physical_clearcoat.html
## Changelog
### Added
* `StandardMaterial` now supports a clearcoat layer, which represents a
thin translucent layer over an underlying material.
* The glTF loader now supports the `KHR_materials_clearcoat` extension,
representing materials with clearcoat layers.
## Migration Guide
* The lighting functions in the `pbr_lighting` WGSL module now have
clearcoat parameters, if `STANDARD_MATERIAL_CLEARCOAT` is defined.
* The `R` reflection vector parameter has been removed from some
lighting functions, as it was unused.
# Objective
- `DynamicUniformBuffer` tries to create a buffer as soon as the changed
flag is set to true. This doesn't work correctly when the buffer wasn't
already created. This currently creates a crash because it's trying to
create a buffer of size 0 if the flag is set but there's no buffer yet.
## Solution
- Don't create a changed buffer until there's data that needs to be
written to a buffer.
## Testing
- run `cargo run --example scene_viewer` and see that it doesn't crash
anymore
Fixes#13235
# Objective
Documentation should mention the two plugins required for your custom
`CameraProjection` to work.
## Solution
Documented!
---
I tried linking to `bevy_pbr::PbrProjectionPlugin` from
`bevy_render:📷:CameraProjection` but it wasn't in scope. Is there
a trick to it?
# Objective
- In PR #12882 I added a new example which contained a comment with an
unfinished and cut off sentence. This wasn't caught until after the PR
was merged.
- This simply finishes that comment.
## Solution
- Finished the incomplete comment.
## Testing
- This is simply a comment change so no testing needed other than
reading it.
# Objective
- Per-cluster (instance of a meshlet) data upload is ridiculously
expensive in both CPU and GPU time (8 bytes per cluster, millions of
clusters, you very quickly run into PCIE bandwidth maximums, and lots of
CPU-side copies and malloc).
- We need to be uploading only per-instance/entity data. Anything else
needs to be done on the GPU.
## Solution
- Per instance, upload:
- `meshlet_instance_meshlet_counts_prefix_sum` - An exclusive prefix sum
over the count of how many clusters each instance has.
- `meshlet_instance_meshlet_slice_starts` - The starting index of the
meshlets for each instance within the `meshlets` buffer.
- A new `fill_cluster_buffers` pass once at the start of the frame has a
thread per cluster, and finds its instance ID and meshlet ID via a
binary search of `meshlet_instance_meshlet_counts_prefix_sum` to find
what instance it belongs to, and then uses that plus
`meshlet_instance_meshlet_slice_starts` to find what number meshlet
within the instance it is. The shader then writes out the per-cluster
instance/meshlet ID buffers for later passes to quickly read from.
- I've gone from 45 -> 180 FPS in my stress test scene, and saved
~30ms/frame of overall CPU/GPU time.
# Objective
in response to [13222](https://github.com/bevyengine/bevy/issues/13222)
## Solution
The Image trait was already re-exported in bevy_render/src/lib.rs, So I
added it inline there.
## Testing
Confirmed that it does compile. Simple change, shouldn't cause any
bugs/regressions.
# Objective
`bevy_pbr/utils.wgsl` shader file contains mathematical constants and
color conversion functions. Both of those should be accessible without
enabling `bevy_pbr` feature. For example, tonemapping can be done in non
pbr scenario, and it uses color conversion functions.
Fixes#13207
## Solution
* Move mathematical constants (such as PI, E) from
`bevy_pbr/src/render/utils.wgsl` into `bevy_render/src/maths.wgsl`
* Move color conversion functions from `bevy_pbr/src/render/utils.wgsl`
into new file `bevy_render/src/color_operations.wgsl`
## Testing
Ran multiple examples, checked they are working:
* tonemapping
* color_grading
* 3d_scene
* animated_material
* deferred_rendering
* 3d_shapes
* fog
* irradiance_volumes
* meshlet
* parallax_mapping
* pbr
* reflection_probes
* shadow_biases
* 2d_gizmos
* light_gizmos
---
## Changelog
* Moved mathematical constants (such as PI, E) from
`bevy_pbr/src/render/utils.wgsl` into `bevy_render/src/maths.wgsl`
* Moved color conversion functions from `bevy_pbr/src/render/utils.wgsl`
into new file `bevy_render/src/color_operations.wgsl`
## Migration Guide
In user's shader code replace usage of mathematical constants from
`bevy_pbr::utils` to the usage of the same constants from
`bevy_render::maths`.
# Objective
Dynamic types can be tricky to understand and work with in bevy_reflect.
There should be an example that shows what they are and how they're
used.
## Solution
Add a `Dynamic Types` reflection example.
I'm planning to go through the reflection examples, adding new ones and
updating old ones. And I think this walkthrough style tends to work
best. Due to the amount of text and associated explanation, it might fit
better in a dedicated reflection chapter of the WIP Bevy Book. However,
I think it might be valuable to have some public-facing tutorials for
these concepts.
Let me know if there any thoughts or critiques with the example— both in
content and this overall structure!
## Testing
To test these changes, you can run the example locally:
```
cargo run --example dynamic_types
```
---
## Changelog
- Add `Dynamic Types` reflection example
# Objective
The `custom_loop` example didn't replicate the `app.finish` /
`app.cleanup` calls from the default runner; I discovered this when
trying to troubleshoot why my application with a custom loop wasn't
calling its plugin finalizers, and realised that the upstream example
that I'd referenced didn't have the relevant calls.
## Solution
Added the missing calls, replicating what the default runner does:
d390420093/crates/bevy_app/src/app.rs (L895-L896)
## Testing
I've confirmed that adding these two calls to my application fixed the
issue I was encountering. I haven't tested it within the example itself
as it's relatively straightforward and I didn't want to pollute the
example with a plugin using a finalizer.
# Objective
- In the documentation of the `bevy` crate, we embed the Bevy logo.
([docs.rs](https://docs.rs/bevy/0.13.2/bevy/index.html),
[logo](https://bevyengine.org/assets/bevy_logo_docs.svg))
- It was first added in 9aae341.
- Markdown supports adding alternate descriptions for images that either
cannot be loaded or for screen readers.
## Solution
- Add alt text for the Bevy logo.
---
## Changelog
- Added alt text to Bevy logo.
# Objective
- Add auto exposure/eye adaptation to the bevy render pipeline.
- Support features that users might expect from other engines:
- Metering masks
- Compensation curves
- Smooth exposure transitions
This PR is based on an implementation I already built for a personal
project before https://github.com/bevyengine/bevy/pull/8809 was
submitted, so I wasn't able to adopt that PR in the proper way. I've
still drawn inspiration from it, so @fintelia should be credited as
well.
## Solution
An auto exposure compute shader builds a 64 bin histogram of the scene's
luminance, and then adjusts the exposure based on that histogram. Using
a histogram allows the system to ignore outliers like shadows and
specular highlights, and it allows to give more weight to certain areas
based on a mask.
---
## Changelog
- Added: AutoExposure plugin that allows to adjust a camera's exposure
based on it's scene's luminance.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Follow-up of #13184 :)
- We use `ui_test` to test compiler errors for our custom macros.
- There are four crates related to compile fail tests
- `bevy_ecs_compile_fail_tests`, `bevy_macros_compile_fail_tests`, and
`bevy_reflect_compile_fail_tests`, which actually test the macros.
-
[`bevy_compile_test_utils`](64c1c65783/crates/bevy_compile_test_utils),
which provides helpers and common patterns for these tests.
- All of these crates reside within the `crates` directory.
- This can be confusing, especially for newcomers. All of the other
folders in `crates` are actual published libraries, except for these 4.
## Solution
- Move all compile fail tests to a `compile_fail` folder under their
corresponding crate.
- E.g. `crates/bevy_ecs_compile_fail_tests` would be moved to
`crates/bevy_ecs/compile_fail`.
- Move `bevy_compile_test_utils` to `tools/compile_fail_utils`.
There are a few benefits to this approach:
1. An internal testing detail is less intrusive (and confusing) for
those who just want to browse the public Bevy interface.
2. Follows a pre-existing approach of organizing related crates inside a
larger crate's folder.
- See `bevy_gizmos/macros` for an example.
4. Makes consistent the terms `compile_test`, `compile_fail`, and
`compile_fail_test` in code. It's all just `compile_fail` now, because
we are specifically testing the error messages on compiler failures.
- To be clear it can still be referred to by these terms in comments and
speech, just the names of the crates and the CI command are now
consistent.
## Testing
Run the compile fail CI command:
```shell
cargo run -p ci -- compile-fail
```
If it still passes, then my refactor was successful.
# Objective
- The report_details flag currently dumps everything at the root of the
repo which isn't ideal
- When running the tool locally it's useful to see the logs as they
appear
## Solution
- Add a flag to show the logs
- Write all the report files to a folder
# Objective
If the current example is used as is, the `button_pressed` system will
run every update.
Update the example so that it is a more ready to use for people
## Solution
Rewrote most of it.
Another solution would be to just minimally fix the problems
```Rust
.add_systems(Startup, (count_entities, setup).chain())
```
and
```Rust
fn evaluate_callbacks(query: Query<(Entity, &Callback), With<Triggered>>, mut commands: Commands) {
for (entity, callback) in query.iter() {
commands.run_system(callback.0);
commands.entity(entity).remove::<Triggered>();
}
}
```
## Testing
- Did you test these changes? If so, how?
Ran the example and pressed A / B on the keyboard
---
# Objective
Resolves#13185
## Solution
Move the following methods from `sub_app` to the `Schedules` resource,
and use them in the sub app:
- `add_systems`
- `configure_sets`
- `ignore_ambiguity`
Add an `entry(&mut self, label: impl ScheduleLabel) -> &mut Schedule`
method to the `Schedules` resource, which returns a mutable reference to
the schedule associated with the label, and creates one if it doesn't
already exist. (build on top of the `entry(..).or_insert_with(...)`
pattern in `HashMap`.
## Testing
- Did you test these changes? If so, how? Added 4 unit tests to the
`schedule.rs` - one that validates adding a system to an existing
schedule, one that validates adding a system to a new one, one that
validates configuring sets on an existing schedule, and one that
validates configuring sets on a new schedule.
- I didn't add tests for `entry` since the previous 4 tests use
functions that rely on it.
- I didn't test `ignore_ambiguity` since I didn't see examples of it's
use, and am not familiar enough with it to know how to set up a good
test for it. However, it relies on the `entry` method as well, so it
should work just like the other 2 methods.
This is an adoption of #12670 plus some documentation fixes. See that PR
for more details.
---
## Changelog
* Renamed `BufferVec` to `RawBufferVec` and added a new `BufferVec`
type.
## Migration Guide
`BufferVec` has been renamed to `RawBufferVec` and a new similar type
has taken the `BufferVec` name.
---------
Co-authored-by: Patrick Walton <pcwalton@mimiga.net>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
# Objective
Coordinating work can be hard, and figuring out how to get started with
contributions is always a challenge.
We've had great success with informal working groups in the past
(primitives, bevy_color, stageless). However, they're not at all
discoverable, are hard to keep track of and tend to flood the dev
channels that they're in.
When their messages are moved to Discord threads, they then get
completely scattered and buried.
## Solution
We can formalize the working groups in a very process-light way, and
give them a discoverable home by using a curated forum channel on
Discord.
While we'll still need more stringent PR reviews for particularly
complex or architectural changes made as part of these initiatives, a
broad sign off on the course of action goes a long way to building
consensus. By baking that into the process, I think we can avoid a lot
of wasted work and relitigation without encouraging mega-PRs or RFCs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
~Returning a app exit code from the winit runner is complicated and
deadlock prone.~
The code to return a app exit code is rather shoddy. It's use of mutex
is redundant, It uses unwrap when not required and can be broken by a
maintainer simply forgetting to set a value.
## Solution
Switch to using a channel.
- Deals with situations in which a event loop exits unexpectedly.
- Never panics. Even in extreme cases.
Implement visibility ranges, also known as hierarchical levels of detail
(HLODs).
This commit introduces a new component, `VisibilityRange`, which allows
developers to specify camera distances in which meshes are to be shown
and hidden. Hiding meshes happens early in the rendering pipeline, so
this feature can be used for level of detail optimization. Additionally,
this feature is properly evaluated per-view, so different views can show
different levels of detail.
This feature differs from proper mesh LODs, which can be implemented
later. Engines generally implement true mesh LODs later in the pipeline;
they're typically more efficient than HLODs with GPU-driven rendering.
However, mesh LODs are more limited than HLODs, because they require the
lower levels of detail to be meshes with the same vertex layout and
shader (and perhaps the same material) as the original mesh. Games often
want to use objects other than meshes to replace distant models, such as
*octahedral imposters* or *billboard imposters*.
The reason why the feature is called *hierarchical level of detail* is
that HLODs can replace multiple meshes with a single mesh when the
camera is far away. This can be useful for reducing drawcall count. Note
that `VisibilityRange` doesn't automatically propagate down to children;
it must be placed on every mesh.
Crossfading between different levels of detail is supported, using the
standard 4x4 ordered dithering pattern from [1]. The shader code to
compute the dithering patterns should be well-optimized. The dithering
code is only active when visibility ranges are in use for the mesh in
question, so that we don't lose early Z.
Cascaded shadow maps show the HLOD level of the view they're associated
with. Point light and spot light shadow maps, which have no CSMs,
display all HLOD levels that are visible in any view. To support this
efficiently and avoid doing visibility checks multiple times, we
precalculate all visible HLOD levels for each entity with a
`VisibilityRange` during the `check_visibility_range` system.
A new example, `visibility_range`, has been added to the tree, as well
as a new low-poly version of the flight helmet model to go with it. It
demonstrates use of the visibility range feature to provide levels of
detail.
[1]: https://en.wikipedia.org/wiki/Ordered_dithering#Threshold_map
[^1]: Unreal doesn't have a feature that exactly corresponds to
visibility ranges, but Unreal's HLOD system serves roughly the same
purpose.
## Changelog
### Added
* A new `VisibilityRange` component is available to conditionally enable
entity visibility at camera distances, with optional crossfade support.
This can be used to implement different levels of detail (LODs).
## Screenshots
High-poly model:
Low-poly model up close:
Crossfading between the two:
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Current config file is hard to extend
## Solution
- Instead of an hard coded list of field, the file now has a list of
`(frame, event)`, and will deal with know events (exiting or taking a
screenshot), or send an event for others that can be dealt by third
party plugins
# Objective
- I've been using the `texture_binding_array` example as a base to use
multiple textures in meshes in my program
- I only realised once I was deep in render code that these helpers
existed to create layouts
- I wish I knew the existed earlier because the alternative (filling in
every struct field) is so much more verbose
## Solution
- Use `BindGroupLayoutEntries::with_indices` to teach users that the
helper exists
- Also fix typo which should be `texture_2d`.
## Alternatives considered
- Just leave it as is to teach users about every single struct field
- However, leaving as is leaves users writing roughly 29 lines versus
roughly 2 lines for 2 entries and I'd prefer the 2 line approach
## Testing
Ran the example locally and compared before and after.
Before:
<img width="1280" alt="image"
src="https://github.com/bevyengine/bevy/assets/135186256/f5897210-2560-4110-b92b-85497be9023c">
After:
<img width="1279" alt="image"
src="https://github.com/bevyengine/bevy/assets/135186256/8d13a939-b1ce-4a49-a9da-0b1779c8cb6a">
Co-authored-by: mgi388 <>
# Objective
- #12755 introduced the need to download a file to run an example
- This means the example fails to run in CI without downloading that
file
## Solution
- Add a new metadata to examples "setup" that provides setup
instructions
- Replace the URL in the meshlet example to one that can actually be
downloaded
- example-showcase execute the setup before running an example
# Objective
- Simplifies/clarifies the winit loop.
- Fixes#12612.
## Solution
The Winit loop runs following this flow:
* NewEvents
* Any number of other events, that can be 0, including RequestRedraw
* AboutToWait
Bevy also uses the UpdateMode, to define how the next loop has to run.
It can be essentially:
* Continuous, using ControlFlow::Wait for windowed apps, and
ControlFlow::Poll for windowless apps
* Reactive/ReactiveLowPower, using ControlFlow::WaitUntil with a
specific wait delay
The changes are made to follow this pattern, so that
* NewEvents define if the WaitUntil has been canceled because we
received a Winit event.
* AboutToWait:
* checks if the window has to be redrawn
* otherwise calls app.update() if the WaitUntil timeout has elapsed
* updates the ControlFlow accordingly
To make the code more logical:
* AboutToWait checks if any Bevy's RequestRedraw event has been emitted
* create_windows is run every cycle, at the beginning of the loop
* the ActiveState (that could be renamed ActivityState) is updated in
AboutToWait, symmetrically for WillSuspend/WillResume
* the AppExit events are checked every loop cycle, to exit the app early
## Platform-specific testing
- [x] Windows
- [x] MacOs
- [x] Linux (x11)
- [x] Linux (Wayland)
- [x] Android
- [x] iOS
- [x] WASM/WebGL2 (Chrome)
- [x] WASM/WebGL2 (Firefox)
- [x] WASM/WebGL2 (Safari)
- [x] WASM/WebGpu (Chrome)
---------
Co-authored-by: François <francois.mockers@vleue.com>
## Summary/Description
This PR extends states to allow support for a wider variety of state
types and patterns, by providing 3 distinct types of state:
- Standard [`States`] can only be changed by manually setting the
[`NextState<S>`] resource. These states are the baseline on which the
other state types are built, and can be used on their own for many
simple patterns. See the [state
example](https://github.com/bevyengine/bevy/blob/latest/examples/ecs/state.rs)
for a simple use case - these are the states that existed so far in
Bevy.
- [`SubStates`] are children of other states - they can be changed
manually using [`NextState<S>`], but are removed from the [`World`] if
the source states aren't in the right state. See the [sub_states
example](https://github.com/lee-orr/bevy/blob/derived_state/examples/ecs/sub_states.rs)
for a simple use case based on the derive macro, or read the trait docs
for more complex scenarios.
- [`ComputedStates`] are fully derived from other states - they provide
a [`compute`](ComputedStates::compute) method that takes in the source
states and returns their derived value. They are particularly useful for
situations where a simplified view of the source states is necessary -
such as having an `InAMenu` computed state derived from a source state
that defines multiple distinct menus. See the [computed state
example](https://github.com/lee-orr/bevy/blob/derived_state/examples/ecs/computed_states.rscomputed_states.rs)
to see a sampling of uses for these states.
# Objective
This PR is another attempt at allowing Bevy to better handle complex
state objects in a manner that doesn't rely on strict equality. While my
previous attempts (https://github.com/bevyengine/bevy/pull/10088 and
https://github.com/bevyengine/bevy/pull/9957) relied on complex matching
capacities at the point of adding a system to application, this one
instead relies on deterministically deriving simple states from more
complex ones.
As a result, it does not require any special macros, nor does it change
any other interactions with the state system once you define and add
your derived state. It also maintains a degree of distinction between
`State` and just normal application state - your derivations have to end
up being discreet pre-determined values, meaning there is less of a
risk/temptation to place a significant amount of logic and data within a
given state.
### Addition - Sub States
closes#9942
After some conversation with Maintainers & SMEs, a significant concern
was that people might attempt to use this feature as if it were
sub-states, and find themselves unable to use it appropriately. Since
`ComputedState` is mainly a state matching feature, while `SubStates`
are more of a state mutation related feature - but one that is easy to
add with the help of the machinery introduced by `ComputedState`, it was
added here as well. The relevant discussion is here:
https://discord.com/channels/691052431525675048/1200556329803186316
## Solution
closes#11358
The solution is to create a new type of state - one implementing
`ComputedStates` - which is deterministically tied to one or more other
states. Implementors write a function to transform the source states
into the computed state, and it gets triggered whenever one of the
source states changes.
In addition, we added the `FreelyMutableState` trait , which is
implemented as part of the derive macro for `States`. This allows us to
limit use of `NextState<S>` to states that are actually mutable,
preventing mis-use of `ComputedStates`.
---
## Changelog
- Added `ComputedStates` trait
- Added `FreelyMutableState` trait
- Converted `NextState` resource to an Enum, with `Unchanged` and
`Pending`
- Added `App::add_computed_state::<S: ComputedStates>()`, to allow for
easily adding derived states to an App.
- Moved the `StateTransition` schedule label from `bevy_app` to
`bevy_ecs` - but maintained the export in `bevy_app` for continuity.
- Modified the process for updating states. Instead of just having an
`apply_state_transition` system that can be added anywhere, we now have
a multi-stage process that has to run within the `StateTransition`
label. First, all the state changes are calculated - manual transitions
rely on `apply_state_transition`, while computed transitions run their
computation process before both call `internal_apply_state_transition`
to apply the transition, send out the transition event, trigger
dependent states, and record which exit/transition/enter schedules need
to occur. Once all the states have been updated, the transition
schedules are called - first the exit schedules, then transition
schedules and finally enter schedules.
- Added `SubStates` trait
- Adjusted `apply_state_transition` to be a no-op if the `State<S>`
resource doesn't exist
## Migration Guide
If the user accessed the NextState resource's value directly or created
them from scratch they will need to adjust to use the new enum variants:
- if they created a `NextState(Some(S))` - they should now use
`NextState::Pending(S)`
- if they created a `NextState(None)` -they should now use
`NextState::Unchanged`
- if they matched on the `NextState` value, they would need to make the
adjustments above
If the user manually utilized `apply_state_transition`, they should
instead use systems that trigger the `StateTransition` schedule.
---
## Future Work
There is still some future potential work in the area, but I wanted to
keep these potential features and changes separate to keep the scope
here contained, and keep the core of it easy to understand and use.
However, I do want to note some of these things, both as inspiration to
others and an illustration of what this PR could unlock.
- `NextState::Remove` - Now that the `State` related mechanisms all
utilize options (#11417), it's fairly easy to add support for explicit
state removal. And while `ComputedStates` can add and remove themselves,
right now `FreelyMutableState`s can't be removed from within the state
system. While it existed originally in this PR, it is a different
question with a separate scope and usability concerns - so having it as
it's own future PR seems like the best approach. This feature currently
lives in a separate branch in my fork, and the differences between it
and this PR can be seen here: https://github.com/lee-orr/bevy/pull/5
- `NextState::ReEnter` - this would allow you to trigger exit & entry
systems for the current state type. We can potentially also add a
`NextState::ReEnterRecirsive` to also re-trigger any states that depend
on the current one.
- More mechanisms for `State` updates - This PR would finally make
states that aren't a set of exclusive Enums useful, and with that comes
the question of setting state more effectively. Right now, to update a
state you either need to fully create the new state, or include the
`Res<Option<State<S>>>` resource in your system, clone the state, mutate
it, and then use `NextState.set(my_mutated_state)` to make it the
pending next state. There are a few other potential methods that could
be implemented in future PRs:
- Inverse Compute States - these would essentially be compute states
that have an additional (manually defined) function that can be used to
nudge the source states so that they result in the computed states
having a given value. For example, you could use set the `IsPaused`
state, and it would attempt to pause or unpause the game by modifying
the `AppState` as needed.
- Closure-based state modification - this would involve adding a
`NextState.modify(f: impl Fn(Option<S> -> Option<S>)` method, and then
you can pass in closures or function pointers to adjust the state as
needed.
- Message-based state modification - this would involve either creating
states that can respond to specific messages, similar to Elm or Redux.
These could either use the `NextState` mechanism or the Event mechanism.
- ~`SubStates` - which are essentially a hybrid of computed and manual
states. In the simplest (and most likely) version, they would work by
having a computed element that determines whether the state should
exist, and if it should has the capacity to add a new version in, but
then any changes to it's content would be freely mutated.~ this feature
is now part of this PR. See above.
- Lastly, since states are getting more complex there might be value in
moving them out of `bevy_ecs` and into their own crate, or at least out
of the `schedule` module into a `states` module. #11087
As mentioned, all these future work elements are TBD and are explicitly
not part of this PR - I just wanted to provide them as potential
explorations for the future.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Marcel Champagne <voiceofmarcel@gmail.com>
Co-authored-by: MiniaczQ <xnetroidpl@gmail.com>
# Objective
- `README.md` is a common file that usually gives an overview of the
folder it is in.
- When on <https://crates.io>, `README.md` is rendered as the main
description.
- Many crates in this repository are lacking `README.md` files, which
makes it more difficult to understand their purpose.
<img width="1552" alt="image"
src="https://github.com/bevyengine/bevy/assets/59022059/78ebf91d-b0c4-4b18-9874-365d6310640f">
- There are also a few inconsistencies with `README.md` files that this
PR and its follow-ups intend to fix.
## Solution
- Create a `README.md` file for all crates that do not have one.
- This file only contains the title of the crate (underscores removed,
proper capitalization, acronyms expanded) and the <https://shields.io>
badges.
- Remove the `readme` field in `Cargo.toml` for `bevy` and
`bevy_reflect`.
- This field is redundant because [Cargo automatically detects
`README.md`
files](https://doc.rust-lang.org/cargo/reference/manifest.html#the-readme-field).
The field is only there if you name it something else, like `INFO.md`.
- Fix capitalization of `bevy_utils`'s `README.md`.
- It was originally `Readme.md`, which is inconsistent with the rest of
the project.
- I created two commits renaming it to `README.md`, because Git appears
to be case-insensitive.
- Expand acronyms in title of `bevy_ptr` and `bevy_utils`.
- In the commit where I created all the new `README.md` files, I
preferred using expanded acronyms in the titles. (E.g. "Bevy Developer
Tools" instead of "Bevy Dev Tools".)
- This commit changes the title of existing `README.md` files to follow
the same scheme.
- I do not feel strongly about this change, please comment if you
disagree and I can revert it.
- Add <https://shields.io> badges to `bevy_time` and `bevy_transform`,
which are the only crates currently lacking them.
---
## Changelog
- Added `README.md` files to all crates missing it.
# Objective
- Update glam version requirement to latest version.
## Solution
- Updated `glam` version requirement from 0.25 to 0.27.
- Updated `encase` and `encase_derive_impl` version requirement from 0.7
to 0.8.
- Updated `hexasphere` version requirement from 10.0 to 12.0.
- Breaking changes from glam changelog:
- [0.26.0] Minimum Supported Rust Version bumped to 1.68.2 for impl
From<bool> for {f32,f64} support.
- [0.27.0] Changed implementation of vector fract method to match the
Rust implementation instead of the GLSL implementation, that is self -
self.trunc() instead of self - self.floor().
---
## Migration Guide
- When using `glam` exports, keep in mind that `vector` `fract()` method
now matches Rust implementation (that is `self - self.trunc()` instead
of `self - self.floor()`). If you want to use the GLSL implementation
you should now use `fract_gl()`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I'm reading through the schedule code, which is somewhat lacking
documentation.
I've been adding some docstrings to help me understand the code; I feel
like some of them could be useful to also help others read this code.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Make `Result<T, E>` implement Reflect such that it is an Enum rather
than a Value
- Fixes#13178
## Solution
- Use the correct macro
## Testing
- Did you test these changes?
I tried it out locally, and it does what it says on the tin. Not sure
how to test it in context of the crate?
---
## Changelog
### Changed
- Result now uses `ReflectKind::Enum` rather than `ReflectKind::Value`,
allowing for inspection of its constituents
## Migration Guide
`Result<T, E>` has had its `Reflect` implementation changed to align it
with `Option<T>` and its intended semantics: A carrier of either an `Ok`
or `Err` value, and the ability to access it. To achieve this it is no
longer a `ReflectKind::Value` but rather a `ReflectKind::Enum` and as
such carries these changes with it:
For `Result<T, E>`
- Both `T` and `E` no longer require to be `Clone` and now require to be
`FromReflect`
- `<Result<T, E> as Reflect>::reflect_*` now returns a
`ReflectKind::Enum`, so any code that previously relied on it being a
`Value` kind will have to be adapted.
- `Result<T, E>` now implements `Enum`
Since the migration is highly dependent on the previous usage, no
automatic upgrade path can be given.
Signed-off-by: Marcel Müller <neikos@neikos.email>
# Objective
The existing labels are inadequate for keeping track of the state of
work at a glance. They're also inadequate for finding work that's at an
appropriate difficulty level to either implement or review.
## Solution
- Add a complete set of difficulty labels
- Move `S-Controversial` into its own category
- Adding a complete set of controversiality labels, adding
`X-Uncontroversial` and `X-Contentious`
- Add a complete set of status labels: adding `S-Needs-Testing`,
`S-Needs-Review` and `S-Waiting-On-Author`
- Update CONTRIBUTING.md to reflect the new scheme
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
- Bevy has a large number of open PRs in the backlog.
- When there are problems with these PRs, contributors, maintainers and
SMEs are all often left wondering what to do with them and are reluctant
to close them fully.
- Instead, PRs that are a bad idea end up sititng with Controversial
status forever, while severely rotten PRs have Adopt-Me on them when it
would be more appropriate to simply remake them.
## Solution
- Add clear guidance on how and when to close PRs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
This commit expands Bevy's existing tonemapping feature to a complete
set of filmic color grading tools, matching those of engines like Unity,
Unreal, and Godot. The following features are supported:
* White point adjustment. This is inspired by Unity's implementation of
the feature, but simplified and optimized. *Temperature* and *tint*
control the adjustments to the *x* and *y* chromaticity values of [CIE
1931]. Following Unity, the adjustments are made relative to the [D65
standard illuminant] in the [LMS color space].
* Hue rotation. This simply converts the RGB value to [HSV], alters the
hue, and converts back.
* Color correction. This allows the *gamma*, *gain*, and *lift* values
to be adjusted according to the standard [ASC CDL combined function].
* Separate color correction for shadows, midtones, and highlights.
Blender's source code was used as a reference for the implementation of
this. The midtone ranges can be adjusted by the user. To avoid abrupt
color changes, a small crossfade is used between the different sections
of the image, again following Blender's formulas.
A new example, `color_grading`, has been added, offering a GUI to change
all the color grading settings. It uses the same test scene as the
existing `tonemapping` example, which has been factored out into a
shared glTF scene.
[CIE 1931]: https://en.wikipedia.org/wiki/CIE_1931_color_space
[D65 standard illuminant]:
https://en.wikipedia.org/wiki/Standard_illuminant#Illuminant_series_D
[LMS color space]: https://en.wikipedia.org/wiki/LMS_color_space
[HSV]: https://en.wikipedia.org/wiki/HSL_and_HSV
[ASC CDL combined function]:
https://en.wikipedia.org/wiki/ASC_CDL#Combined_Function
## Changelog
### Added
* Many new filmic color grading options have been added to the
`ColorGrading` component.
## Migration Guide
* `ColorGrading::gamma` and `ColorGrading::pre_saturation` are now set
separately for the `shadows`, `midtones`, and `highlights` sections. You
can migrate code with the `ColorGrading::all_sections` and
`ColorGrading::all_sections_mut` functions, which access and/or update
all sections at once.
* `ColorGrading::post_saturation` and `ColorGrading::exposure` are now
fields of `ColorGrading::global`.
## Screenshots
# Objective
- Reviews could go smoother if reviewers know how a PR was tested, how
they can test it, and if it needs more testing.
## Solution
- Add a testing section
# Objective
Requesting reviews is a useful tool for improving discoverability of PRs
that contributors might be interested in and capable of reviewing.
However, many Bevy org members and authors aren't aware that they can
and should request reviews.
## Solution
Actually document that this is good practice, and remind people that
it's just a nudge.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Reviews with caveats are incredibly useful to maintainers when
evaluating PRs.
However, it's not generally clear to reviewers that conditional
approvals or partial approvals are helpful and welcome.
## Solution
Add clarifying documentation to CONTRIBUTING.md.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
The `Events` containerr should be reflectable, in order to make dev
tools that examine its state more useful.
Fixes#13148.
## Solution
- Add a `Reflect` derive to `Events`, gated behind the `bevy_reflect`
feature
- Add `Reflect` to the contained types to make everything compile.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
- `config_fast_builds.toml` could use some general improvements and
additions.
- [Mold](https://github.com/rui314/mold) is a modern linker with serious
performance improvements that provides a good alternative to LLD.
- This is exactly the same as #12949; I accidentally deleted the branch.
😅
## Solution
- Majorly improve `config_fast_builds.toml`.
- Add further documentation.
- Add a section for the alternative Mold linker, which is **much**
faster.
- Disable nightly options by default so that developers running stable
can copy the file without having to edit it. (Nightly is still
recommended, but this is following suite with `rustfmt.toml`.)
---
## Changelog
- Majorly improved `config_fast_builds.toml` documentation and added
Mold linker.
# Objective
- Enables support for `Display::Block`
- Enables support for `Overflow::Hidden`
- Allows for cleaner integration with text, image and other content
layout.
- Unblocks https://github.com/bevyengine/bevy/pull/8104
- Unlocks the possibility of Bevy creating a custom layout tree over
which Taffy operates.
- Enables #8808 / #10193 to remove a Mutex around the font system.
## Todo
- [x] ~Fix rendering of text/images to account for padding/border on
nodes (should size/position to content box rather than border box)~ In
order get this into a mergeable state this PR instead zeroes out
padding/border when syncing leaf node styles into Taffy to preserve the
existing behaviour. https://github.com/bevyengine/bevy/issues/6879 can
be fixed in a followup PR.
## Solution
- Update the version of Taffy
- Update code to work with the new version
Note: Taffy 0.4 has not yet been released. This PR is being created in
advance of the release to ensure that there are no blockers to upgrading
once the release occurs.
---
## Changelog
- Bevy now supports the `Display::Block` and `Overflow::Hidden` styles.
# Objective
A `RawWindowHandle` is only valid as long as the window it was retrieved
from is alive. Extend the lifetime of the window, so that the
`RawWindowHandle` doesn't outlive it, and bevy doesn't crash when
closing a window a pipelined renderer is drawing to.
- Fix#11236
- Fix#11150
- Fix#11734
- Alternative to / Closes#12524
## Solution
Introduce a `WindowWrapper` that takes ownership of the window. Require
it to be used when constructing a `RawHandleWrapper`. This forces
windowing backends to store their window in this wrapper.
The `WindowWrapper` is implemented by storing the window in an `Arc<dyn
Any + Send + Sync>`.
We use dynamic dispatch here because we later want the
`RawHandleWrapper` to be able dynamically hold a reference to any
windowing backend's window.
But alas, the `WindowWrapper` itself is still practically invisible to
windowing backends, because it implements `Deref` to the underlying
window, by storing its type in a `PhantomData`.
---
## Changelog
### Added
- Added `WindowWrapper`, which windowing backends are now required to
use to store their underlying window.
### Fixed
- Fixed a safety problem which caused crashes when closing bevy windows
when using pipelined rendering.
## Migration Guide
- Windowing backends now need to store their window in the new
`WindowWrapper`.
