# Objective
#5483 allows for the creation of non-`Sync` locals. However, it's not
actually possible to use these types as there is a `Sync` bound on the
`Deref` impls.
## Solution
Remove the unnecessary bounds.
# Objective
- have errors in configure_set and configure_sets show the line number
of the user calling location rather than pointing to schedule.rs
- use display formatting for the errors
## Example Error Text
```text
// dependency loop
// before
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: DependencyLoop("A")', crates\bevy_ecs\src\schedule\schedule.rs:682:39
// after
thread 'main' panicked at 'System set `A` depends on itself.', examples/stress_tests/bevymark.rs:16:9
// hierarchy loop
// before
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: HierarchyLoop("A")', crates\bevy_ecs\src\schedule\schedule.rs:682:3
// after
thread 'main' panicked at 'System set `A` contains itself.', examples/stress_tests/bevymark.rs:16:9
// configuring a system type set
// before
thread 'main' panicked at 'configuring system type sets is not allowed', crates\bevy_ecs\src\schedule\config.rs:394:9
//after
thread 'main' panicked at 'configuring system type sets is not allowed', examples/stress_tests/bevymark.rs:16:9
```
Code to produce errors:
```rust
use bevy::prelude::*;
#[derive(SystemSet, Clone, Debug, PartialEq, Eq, Hash)]
enum TestSet {
A,
}
fn main() {
fn foo() {}
let mut app = App::empty();
// Hierarchy Loop
app.configure_set(Main, TestSet::A.in_set(TestSet::A));
// Dependency Loop
app.configure_set(Main, TestSet::A.after(TestSet::A));
// Configure System Type Set
app.configure_set(Main, foo.into_system_set());
}
```
# Objective
A Bezier curve is a curve defined by two or more control points. In the
simplest form, it's just a line. The (arguably) most common type of
Bezier curve is a cubic Bezier, defined by four control points. These
are often used in animation, etc. Bevy has a Bezier curve struct called
`Bezier`. However, this is technically a misnomer as it only represents
cubic Bezier curves.
## Solution
This PR changes the struct name to `CubicBezier` to more accurately
reflect the struct's usage. Since it's exposed in Bevy's prelude, it can
potentially collide with other `Bezier` implementations. While that
might instead be an argument for removing it from the prelude, there's
also something to be said for adding a more general `Bezier` into Bevy,
in which case we'd likely want to use the name `Bezier`. As a final
motivator, not only is the struct located in `cubic_spines.rs`, there
are also several other spline-related structs which follow the
`CubicXxx` naming convention where applicable. For example,
`CubicSegment` represents a cubic Bezier curve (with coefficients
pre-baked).
---
## Migration Guide
- Change all `Bezier` references to `CubicBezier`
# Objective
Fixes#9550
## Solution
Removes a check that asserts that _all_ attribute metas are path-only,
rather than just the `#[deref]` attribute itself.
---
## Changelog
- Fixes an issue where deriving `Deref` with `#[deref]` on a field
causes other attributes to sometimes result in a compile error
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
These new defaults match what is used by `Camera2dBundle::default()`,
removing a potential footgun from overriding a field in the projection
component of the bundle.
## Solution
Adjusted the near clipping plane of `OrthographicProjection::default()`
to `-1000.`.
---
## Changelog
Changed: `OrthographicProjection::default()` now matches the value used
in `Camera2dBundle::default()`
## Migration Guide
Workarounds used to keep the projection consistent with the bundle
defaults are no longer required. Meanwhile, uses of
`OrthographicProjection` in 2D scenes may need to be adjusted; the
`near` clipping plane default was changed from `0.0` to `-1000.0`.
# Objective
`sync_simple_transforms` only checks for removed parents and doesn't
filter for `Without<Parent>`, so it overwrites the `GlobalTransform` of
non-orphan entities that were orphaned and then reparented since the
last update.
Introduced by #7264
## Solution
Filter for `Without<Parent>`.
Fixes#9517, #9492
## Changelog
`sync_simple_transforms`:
* Added a `Without<Parent>` filter to the orphaned entities query.
Fixes https://github.com/bevyengine/bevy/issues/9458.
On case-insensitive filesystems (Windows, Mac, NTFS mounted in Linux,
etc.), a path can be represented in a multiple ways:
- `c:\users\user\rust\assets\hello\world`
- `c:/users/user/rust/assets/hello/world`
- `C:\USERS\USER\rust\assets\hello\world`
If user specifies a path variant that doesn't match asset folder path
bevy calculates, `path.strip_prefix()` will fail, as demonstrated below:
```rs
dbg!(Path::new("c:/foo/bar/baz").strip_prefix("c:/foo"));
// Ok("bar/baz")
dbg!(Path::new("c:/FOO/bar/baz").strip_prefix("c:/foo"));
// StripPrefixError(())
```
This commit rewrites the code in question in a way that prefix stripping
is no longer necessary.
I've tested with the following paths on my computer:
```rs
let res = asset_server.load_folder("C:\\Users\\user\\rust\\assets\\foo\\bar");
dbg!(res);
let res = asset_server.load_folder("c:\\users\\user\\rust\\assets\\foo\\bar");
dbg!(res);
let res = asset_server.load_folder("C:/Users/user/rust/assets/foo/bar");
dbg!(res);
```
# Objective
* There is no way to read the fields of `GridPlacement` once set.
* Values of `0` for `GridPlacement`'s fields are invalid but can be set.
* A non-zero representation would be half the size.
fixes#9474
## Solution
* Add `get_start`, `get_end` and `get_span` accessor methods.
* Change`GridPlacement`'s constructor functions to panic on arguments of
zero.
* Use non-zero types instead of primitives for `GridPlacement`'s fields.
---
## Changelog
`bevy_ui::ui_node::GridPlacement`:
* Field types have been changed to `Option<NonZeroI16>` and
`Option<NonZeroU16>`. This is because zero values are not valid for
`GridPlacement`. Previously, Taffy interpreted these as auto variants.
* Constructor functions for `GridPlacement` panic on arguments of `0`.
* Added accessor functions: `get_start`, `get_end`, and `get_span`.
These return the inner primitive value (if present) of the respective
fields.
## Migration Guide
`GridPlacement`'s constructor functions no longer accept values of `0`.
Given any argument of `0` they will panic with a `GridPlacementError`.
# Objective
- Fixes#9321
## Solution
- `EntityMap` has been replaced by a simple `HashMap<Entity, Entity>`.
---
## Changelog
- `EntityMap::world_scope` has been replaced with `World::world_scope`
to avoid creating a new trait. This is a public facing change to the
call semantics, but has no effect on results or behaviour.
- `EntityMap`, as a `HashMap`, now operates on `&Entity` rather than
`Entity`. This changes many standard access functions (e.g, `.get`) in a
public-facing way.
## Migration Guide
- Calls to `EntityMap::world_scope` can be directly replaced with the
following:
`map.world_scope(&mut world)` -> `world.world_scope(&mut map)`
- Calls to legacy `EntityMap` methods such as `EntityMap::get` must
explicitly include de/reference symbols:
`let entity = map.get(parent);` -> `let &entity = map.get(&parent);`
# Objective
Fixes#9420
## Solution
Remove one of the two `AppExit` event checks in the
`ScheduleRunnerPlugin`'s main loop. Specificially, the check that
happens immediately before calling `App.update()`, to be consistent with
the `WinitPlugin`.
# Objective
fixes#8357
gltf animations can affect multiple "root" nodes (i.e. top level nodes
within a gltf scene).
the current loader adds an AnimationPlayer to each root node which is
affected by any animation. when a clip which affects multiple root nodes
is played on a root node player, the root node name is not checked,
leading to potentially incorrect weights being applied.
also, the `AnimationClip::compatible_with` method will never return true
for those clips, as it checks that all paths start with the root node
name - not all paths start with the same name so it can't return true.
## Solution
- check the first path node name matches the given root
- change compatible_with to return true if `any` match is found
a better alternative would probably be to attach the player to the scene
root instead of the first child, and then walk the full path from there.
this would be breaking (and would stop multiple animations that *don't*
overlap from being played concurrently), but i'm happy to modify to that
if it's preferred.
---------
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Meshes with a higher number of joints than `MAX_JOINTS` are crashing
- Fixes partly #9021 (doesn't crash anymore, but the mesh is not
correctly displayed)
## Solution
- Only take up to `MAX_JOINTS` joints when extending the buffer
# Objective
Make code relating to event more readable.
Currently the `impl` block of `Events` is split in two, and the big part
of its implementations are put at the end of the file, far from the
definition of the `struct`.
## Solution
- Move and merge the `impl` blocks of `Events` next to its definition.
- Move the `EventSequence` definition and implementations before the
`Events`, because they're pretty trivial and help understand how
`Events` work, rather than being buried bellow `Events`.
I separated those two steps in two commits to not be too confusing. I
didn't modify any code of documentation. I want to do a second PR with
such modifications after this one is merged.
# Objective
Similar to #6344, but contains only `ReflectBundle` changes. Useful for
scripting. The implementation has also been updated to look exactly like
`ReflectComponent`.
---
## Changelog
### Added
- Reflection for bundles.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
This PR's first aim is to fix a mistake in `HalfSpace`'s documentation.
When defining a `Frustum` myself in bevy_basic_portals, I realised that
the "distance" of the `HalfSpace` is not, as the current doc defines,
the "distance from the origin along the normal", but actually the
opposite of that.
See the example I gave in this PR.
This means one of two things:
1. The documentation about `HalfSpace` is wrong (it is either way
because of the `n.p + d > 0` formula given later anyway, which is how it
behaves, but in that formula `d` is indeed the opposite of the "distance
from the origin along the normal", otherwise it should be `n.p > d`)
2. The distance is supposed to be the "distance from the origin along
the normal" but when used in a Frustum it's used as the opposite, and it
is a mistake
3. Same as 2, but it is somehow intended
Since I think `HalfSpace` is only used for `Frustum`, and it's easier to
fix documentation than code, I assumed for this PR we're in case number
1. If we're in case number 3, the documentation of `Frustum` needs to
change, and in case number 2, the code needs to be fixed.
While I was at it, I also :
- Tried to improve the documentation for `Frustum`, `Aabb`, and
`VisibilitySystems`, among others, since they're all related to
`Frustum`.
- Fixed documentation about frustum culling not applying to 2d objects,
which is not true since https://github.com/bevyengine/bevy/pull/7885
## Remarks and questions
- What about a `HalfSpace` with an infinite distance, is it allowed and
does it represents the whole space? If so it should probably be
mentioned.
- I referenced the `update_frusta` system in
`bevy_render::view::visibility` directly instead of referencing its
system set, should I reference the system set instead? It's a bit
annoying since it's in 3 sets.
- `visibility_propagate` is not public for some reason, I think it
probably should be, but for now I only documented its system set, should
I make it public? I don't think that would count as a breaking change?
- Why is `Aabb` inserted by a system, with `NoFrustumCulling` as an
opt-out, instead of having it inserted by default in `PbrBundle` for
example and then the system calculating it when it's added? Is it
because there is still no way to have an optional component inside a
bundle?
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Objective
- `bevy_text/src/pipeline.rs` had some crufty code.
## Solution
Remove the cruft.
- `&mut self` argument was unused by
`TextPipeline::create_text_measure`, so we replace it with a constructor
`TextMeasureInfo::from_text`.
- We also pass a `&Text` to `from_text` since there is no reason to
split the struct before passing it as argument.
- from_text also checks beforehand that every Font exist in the
Assets<Font>. This allows rust to skip the drop code on the Vecs we
create in the method, since there is no early exit.
- We also remove the scaled_fonts field on `TextMeasureInfo`. This
avoids an additional allocation. We can re-use the font on `fonts`
instead in `compute_size`. Building a `ScaledFont` seems fairly cheap,
when looking at the ab_glyph internals.
- We also implement ToSectionText on TextMeasureSection, this let us
skip creating a whole new Vec each time we call compute_size.
- This let us remove compute_size_from_section_text, since its only
purpose was to not have to allocate the Vec we just made redundant.
- Make some immutabe `Vec<T>` into `Box<[T]>` and `String` into
`Box<str>`
- `{min,max}_width_content_size` fields of `TextMeasureInfo` have name
`width` in them, yet the contain information on both width and height.
- `TextMeasureInfo::linebreak_behaviour` -> `linebreak_behavior`
## Migration Guide
- The `ResMut<TextPipeline>` argument to `measure_text_system` doesn't
exist anymore. If you were calling this system manually, you should
remove the argument.
- The `{min,max}_width_content_size` fields of `TextMeasureInfo` are
renamed to `min` and `max` respectively
- Other changes to `TextMeasureInfo` may also break your code if you
were manually building it. Please consider using the new
`TextMeasureInfo::from_text` to build one instead.
- `TextPipeline::create_text_measure` has been removed in favor of
`TextMeasureInfo::from_text`
# Objective
Added `AnimationPlayer` API UX improvements.
- Succestor to https://github.com/bevyengine/bevy/pull/5912
- Fixes https://github.com/bevyengine/bevy/issues/5848
_(Credits to @asafigan for filing #5848, creating the initial pull
request, and the discussion in #5912)_
## Solution
- Created `RepeatAnimation` enum to describe an animation repetition
behavior.
- Added `is_finished()`, `set_repeat()`, and `is_playback_reversed()`
methods to the animation player.
- ~~Made the animation clip optional as per the comment from #5912~~
> ~~My problem is that the default handle [used the initialize a
`PlayingAnimation`] could actually refer to an actual animation if an
AnimationClip is set for the default handle, which leads me to ask,
"Should animation_clip should be an Option?"~~
- Added an accessor for the animation clip `animation_clip()` to the
animation player.
To determine if an animation is finished, we use the number of times the
animation has completed and the repetition behavior. If the animation is
playing in reverse then `elapsed < 0.0` counts as a completion.
Otherwise, `elapsed > animation.duration` counts as a completion. This
is what I would expect, personally. If there's any ambiguity, perhaps we
could add some `AnimationCompletionBehavior`, to specify that kind of
completion behavior to use.
Update: Previously `PlayingAnimation::elapsed` was being used as the
seek time into the animation clip. This was misleading because if you
increased the speed of the animation it would also increase (or
decrease) the elapsed time. In other words, the elapsed time was not
actually the elapsed time. To solve this, we introduce
`PlayingAnimation::seek_time` to serve as the value we manipulate the
move between keyframes. Consequently, `elapsed()` now returns the actual
elapsed time, and is not effected by the animation speed. Because
`set_elapsed` was being used to manipulate the displayed keyframe, we
introduce `AnimationPlayer::seek_to` and `AnimationPlayer::replay` to
provide this functionality.
## Migration Guide
- Removed `set_elapsed`.
- Removed `stop_repeating` in favour of
`AnimationPlayer::set_repeat(RepeatAnimation::Never)`.
- Introduced `seek_to` to seek to a given timestamp inside of the
animation.
- Introduced `seek_time` accessor for the `PlayingAnimation::seek_to`.
- Introduced `AnimationPlayer::replay` to reset the `PlayingAnimation`
to a state where no time has elapsed.
---------
Co-authored-by: Hennadii Chernyshchyk <genaloner@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#8840
Make the cursor position more consistent, right now the cursor position
is *sometimes* outside of the window and returns the position and
*sometimes* `None`.
Even in the cases where someone might be using that position that is
outside of the window, it'll probably require some manual
transformations for it to actually be useful.
## Solution
Check the windows width and height for out of bounds positions.
---
## Changelog
- Cursor position is now always `None` when outside of the window.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
# Objective
Any time we wish to transform the output of a system, we currently use
system piping to do so:
```rust
my_system.pipe(|In(x)| do_something(x))
```
Unfortunately, system piping is not a zero cost abstraction. Each call
to `.pipe` requires allocating two extra access sets: one for the second
system and one for the combined accesses of both systems. This also adds
extra work to each call to `update_archetype_component_access`, which
stacks as one adds multiple layers of system piping.
## Solution
Add the `AdapterSystem` abstraction: similar to `CombinatorSystem`, this
allows you to implement a trait to generically control how a system is
run and how its inputs and outputs are processed. Unlike
`CombinatorSystem`, this does not have any overhead when computing world
accesses which makes it ideal for simple operations such as inverting or
ignoring the output of a system.
Add the extension method `.map(...)`: this is similar to `.pipe(...)`,
only it accepts a closure as an argument instead of an `In<T>` system.
```rust
my_system.map(do_something)
```
This has the added benefit of making system names less messy: a system
that ignores its output will just be called `my_system`, instead of
`Pipe(my_system, ignore)`
---
## Changelog
TODO
## Migration Guide
The `system_adapter` functions have been deprecated: use `.map` instead,
which is a lightweight alternative to `.pipe`.
```rust
// Before:
my_system.pipe(system_adapter::ignore)
my_system.pipe(system_adapter::unwrap)
my_system.pipe(system_adapter::new(T::from))
// After:
my_system.map(std::mem::drop)
my_system.map(Result::unwrap)
my_system.map(T::from)
// Before:
my_system.pipe(system_adapter::info)
my_system.pipe(system_adapter::dbg)
my_system.pipe(system_adapter::warn)
my_system.pipe(system_adapter::error)
// After:
my_system.map(bevy_utils::info)
my_system.map(bevy_utils::dbg)
my_system.map(bevy_utils::warn)
my_system.map(bevy_utils::error)
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fix the `borders`, `ui` and `text_wrap_debug` examples.
## Solution
- Swap `TransparentUi` to use a stable sort
---
This is the smallest change to fix the examples but ideally this is
fixed by setting better sort keys for the UI elements such that we can
swap back to an unstable sort.
# Objective
- break up large build_schedule system to make it easier to read
- Clean up related error messages.
- I have a follow up PR that adds the schedule name to the error
messages, but wanted to break this up from that.
## Changelog
- refactor `build_schedule` to be easier to read
## Sample Error Messages
Dependency Cycle
```text
thread 'main' panicked at 'System dependencies contain cycle(s).
schedule has 1 before/after cycle(s):
cycle 1: system set 'A' must run before itself
system set 'A'
... which must run before system set 'B'
... which must run before system set 'A'
', crates\bevy_ecs\src\schedule\schedule.rs:228:13
```
```text
thread 'main' panicked at 'System dependencies contain cycle(s).
schedule has 1 before/after cycle(s):
cycle 1: system 'foo' must run before itself
system 'foo'
... which must run before system 'bar'
... which must run before system 'foo'
', crates\bevy_ecs\src\schedule\schedule.rs:228:13
```
Hierarchy Cycle
```text
thread 'main' panicked at 'System set hierarchy contains cycle(s).
schedule has 1 in_set cycle(s):
cycle 1: set 'A' contains itself
set 'A'
... which contains set 'B'
... which contains set 'A'
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
System Type Set
```text
thread 'main' panicked at 'Tried to order against `SystemTypeSet(fn foo())` in a schedule that has more than one `SystemTypeSet(fn foo())` instance. `SystemTypeSet(fn foo())` is a `SystemTypeSet` and cannot be used for ordering if ambiguous. Use a different set without this restriction.', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Hierarchy Redundancy
```text
thread 'main' panicked at 'System set hierarchy contains redundant edges.
hierarchy contains redundant edge(s) -- system set 'X' cannot be child of set 'A', longer path exists
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Systems have ordering but interset
```text
thread 'main' panicked at '`A` and `C` have a `before`-`after` relationship (which may be transitive) but share systems.', crates\bevy_ecs\src\schedule\schedule.rs:227:51
```
Cross Dependency
```text
thread 'main' panicked at '`A` and `B` have both `in_set` and `before`-`after` relationships (these might be transitive). This combination is unsolvable as a system cannot run before or after a set it belongs to.', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
Ambiguity
```text
thread 'main' panicked at 'Systems with conflicting access have indeterminate run order.
1 pairs of systems with conflicting data access have indeterminate execution order. Consider adding `before`, `after`, or `ambiguous_with` relationships between these:
-- res_mut and res_ref
conflict on: ["bevymark::ambiguity::X"]
', crates\bevy_ecs\src\schedule\schedule.rs:230:13
```
# Objective
Sometimes you want to create a plugin with a custom run condition. In a
function, you take the `Condition` trait and then make a
`BoxedCondition` from it to store it. And then you want to add that
condition to a system, but you can't, because there is only the `run_if`
function available which takes `impl Condition<M>` instead of
`BoxedCondition`. So you have to create a wrapper type for the
`BoxedCondition` and implement the `System` and `ReadOnlySystem` traits
for the wrapper (Like it's done in the picture below). It's very
inconvenient and boilerplate. But there is an easy solution for that:
make the `run_if_inner` system that takes a `BoxedCondition` public.
Also, it makes sense to make `in_set_inner` function public as well with
the same motivation.
A chunk of the source code of the `bevy-inspector-egui` crate.
## Solution
Make `run_if_inner` function public.
Rename `run_if_inner` to `run_if_dyn`.
Make `in_set_inner` function public.
Rename `in_set_inner` to `in_set_dyn`.
## Changelog
Changed visibility of `run_if_inner` from `pub(crate)` to `pub`.
Renamed `run_if_inner` to `run_if_dyn`.
Changed visibility of `in_set_inner` from `pub(crate)` to `pub`.
Renamed `in_set_inner` to `in_set_dyn`.
## Migration Guide
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
This is a continuation of this PR: #8062
# Objective
- Reorder render schedule sets to allow data preparation when phase item
order is known to support improved batching
- Part of the batching/instancing etc plan from here:
https://github.com/bevyengine/bevy/issues/89#issuecomment-1379249074
- The original idea came from @inodentry and proved to be a good one.
Thanks!
- Refactor `bevy_sprite` and `bevy_ui` to take advantage of the new
ordering
## Solution
- Move `Prepare` and `PrepareFlush` after `PhaseSortFlush`
- Add a `PrepareAssets` set that runs in parallel with other systems and
sets in the render schedule.
- Put prepare_assets systems in the `PrepareAssets` set
- If explicit dependencies are needed on Mesh or Material RenderAssets
then depend on the appropriate system.
- Add `ManageViews` and `ManageViewsFlush` sets between
`ExtractCommands` and Queue
- Move `queue_mesh*_bind_group` to the Prepare stage
- Rename them to `prepare_`
- Put systems that prepare resources (buffers, textures, etc.) into a
`PrepareResources` set inside `Prepare`
- Put the `prepare_..._bind_group` systems into a `PrepareBindGroup` set
after `PrepareResources`
- Move `prepare_lights` to the `ManageViews` set
- `prepare_lights` creates views and this must happen before `Queue`
- This system needs refactoring to stop handling all responsibilities
- Gather lights, sort, and create shadow map views. Store sorted light
entities in a resource
- Remove `BatchedPhaseItem`
- Replace `batch_range` with `batch_size` representing how many items to
skip after rendering the item or to skip the item entirely if
`batch_size` is 0.
- `queue_sprites` has been split into `queue_sprites` for queueing phase
items and `prepare_sprites` for batching after the `PhaseSort`
- `PhaseItem`s are still inserted in `queue_sprites`
- After sorting adjacent compatible sprite phase items are accumulated
into `SpriteBatch` components on the first entity of each batch,
containing a range of vertex indices. The associated `PhaseItem`'s
`batch_size` is updated appropriately.
- `SpriteBatch` items are then drawn skipping over the other items in
the batch based on the value in `batch_size`
- A very similar refactor was performed on `bevy_ui`
---
## Changelog
Changed:
- Reordered and reworked render app schedule sets. The main change is
that data is extracted, queued, sorted, and then prepared when the order
of data is known.
- Refactor `bevy_sprite` and `bevy_ui` to take advantage of the
reordering.
## Migration Guide
- Assets such as materials and meshes should now be created in
`PrepareAssets` e.g. `prepare_assets<Mesh>`
- Queueing entities to `RenderPhase`s continues to be done in `Queue`
e.g. `queue_sprites`
- Preparing resources (textures, buffers, etc.) should now be done in
`PrepareResources`, e.g. `prepare_prepass_textures`,
`prepare_mesh_uniforms`
- Prepare bind groups should now be done in `PrepareBindGroups` e.g.
`prepare_mesh_bind_group`
- Any batching or instancing can now be done in `Prepare` where the
order of the phase items is known e.g. `prepare_sprites`
## Next Steps
- Introduce some generic mechanism to ensure items that can be batched
are grouped in the phase item order, currently you could easily have
`[sprite at z 0, mesh at z 0, sprite at z 0]` preventing batching.
- Investigate improved orderings for building the MeshUniform buffer
- Implementing batching across the rest of bevy
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: robtfm <50659922+robtfm@users.noreply.github.com>
# Objective
* `Local` and `SystemName` implement `Debug` manually, but they could
derive it.
* `QueryState` and `dyn System` have unconventional debug formatting.
# Objective
Fixes#9509
## Solution
We use the assumption, that enum types are uppercase in contrast to
module names.
[`collapse_type_name`](crates/bevy_util/src/short_names) is now
retaining the second last segment, if it starts with a uppercase
character.
---------
Co-authored-by: Emi <emanuel.boehm@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- Fixes#9533
## Solution
* Added `Val::ZERO` as a constant which is defined as `Val::Px(0.)`.
* Added manual `PartialEq` implementation for `Val` which allows any
zero value to equal any other zero value. E.g., `Val::Px(0.) ==
Val::Percent(0.)` etc. This is technically a breaking change, as
`Val::Px(0.) == Val::Percent(0.)` now equals `true` instead of `false`
(as an example)
* Replaced instances of `Val::Px(0.)`, `Val::Percent(0.)`, etc. with
`Val::ZERO`
* Fixed `bevy_ui::layout::convert::tests::test_convert_from` test to
account for Taffy not equating `Points(0.)` and `Percent(0.)`. These
tests now use `assert_eq!(...)` instead of `assert!(matches!(...))`
which gives easier to diagnose error messages.
# Objective
All delimiter symbols used by the path parser are ASCII, this means we
can entirely ignore UTF8 handling. This may improve performance.
## Solution
Instead of storing the path as an `&str` + the parser offset, and
reading the path using `&self.path[self.offset..]`, we store the parser
state in a `&[u8]`. This allows two optimizations:
1. Avoid UTF8 checking on `&self.path[self.offset..]`
2. Avoid any kind of bound checking, since the length of what is left to
read is stored in the `&[u8]`'s reference metadata, and is assumed valid
by the compiler.
This is a major improvement when comparing to the previous parser.
1. `access_following` and `next_token` now inline in `PathParser::next`
2. Benchmarking show a 20% performance increase (#9364)
Please note that while we ignore UTF-8 handling, **utf-8 is still
supported**. This is because we only handle "at the edges" what happens
exactly before and after a recognized `SYMBOL`. utf-8 is handled
transparently beyond that.
# Objective
- Unify the `ParsedPath` and `GetPath` APIs. They weirdly didn't play
well together.
- Make `ParsedPath` and `GetPath` API easier to use
## Solution
- Add the `ReflectPath` trait.
- `GetPath` methods now accept an `impl ReflectPath<'a>` instead of a
`&'a str`, this mean it also can accepts a `&ParsedPath`
- Make `GetPath: Reflect` and use default impl for `Reflect` types.
- Add `GetPath` and `ReflectPath` to the `bevy_reflect` prelude
---
## Changelog
- Add the `ReflectPath` trait.
- `GetPath` methods now accept an `impl ReflectPath<'a>` instead of a
`&'a str`, this mean it also can accept a `&ParsedPath`
- Make `GetPath: Reflect` and use default impl for `Reflect` types.
- Add `GetPath` and `ReflectPath` to the `bevy_reflect` prelude
## Migration Guide
`GetPath` now requires `Reflect`. This reduces a lot of boilerplate on
bevy's side. If you were implementing manually `GetPath` on your own
type, please get in touch!
`ParsedPath::element[_mut]` isn't an inherent method of `ParsedPath`,
you must now import `ReflectPath`. This is only relevant if you weren't
importing the bevy prelude.
```diff
-use bevy::reflect::ParsedPath;
+use bevy::reflect::{ParsedPath, ReflectPath};
parsed_path.element(reflect_type).unwrap()
parsed_path.element(reflect_type).unwrap()
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fixes#9552
## Solution
- Only n_pixels bytes of data was being copied instead of 1 byte per
component, i.e. n_pixels * 4
---
## Changelog
- Fixed: loading of Rgb8 ktx2 files.
# Objective
- Fix blender gltf imports with emissive materials
- Progress towards https://github.com/bevyengine/bevy/issues/5178
## Solution
- Upgrade to gltf-rs 1.3 supporiting
[KHR_materials_emissive_strength](https://github.com/KhronosGroup/glTF/blob/main/extensions/2.0/Khronos/KHR_materials_emissive_strength/README.md)
---
## Changelog
- GLTF files using `emissiveStrength` (such as those exported by
blender) are now supported
## Migration Guide
- The GLTF asset loader will now factor in `emissiveStrength` when
converting to Bevy's `StandardMaterial::emissive`. Blender will export
emissive materials using this field. Remove the field from your GLTF
files or manually modify your materials post-asset-load to match how
Bevy would load these files in previous versions.
# Objective
Fixes incorrect docs in `bevy_ui` for `JustifyItems` and `JustifySelf`.
## Solution
`JustifyItems` and `JustifySelf` target the main axis and not the cross
axis.
# Objective
`round_ties_up` checks the predicate:
```rust
0. <= value || value.fract() != 0.5
```
which is meant to determine if the value is negative with a fractional
part of `0.5`.
However given a negative value, `fract` returns a negative fraction so
the predicate is true for all numeric values and `ceil` is never called.
## Solution
Changed the predicate to `value.fract() != -0.5` and added a test.
Also improved the comments a bit.
# Objective
- A few of the `const DEFAULT` properties of the grid feature are not
marked as pub. This is an issue because it means you can't have a
`const` `Style` declaration anymore. Most of the existing properties are
already pub.
## Solution
- add the missing pub
# Objective
- Wireframe currently don't display since #9416
- There is an error
```
2023-08-20T10:06:54.190347Z ERROR bevy_render::render_resource::pipeline_cache: failed to process shader:
error: no definition in scope for identifier: 'vertex_no_morph'
┌─ crates/bevy_pbr/src/render/wireframe.wgsl:26:94
│
26 │ let model = bevy_pbr::mesh_functions::get_model_matrix(vertex_no_morph.instance_index);
│ ^^^^^^^^^^^^^^^ unknown identifier
│
= no definition in scope for identifier: 'vertex_no_morph'
```
## Solution
- Use the correct identifier
# Objective
- Resolves https://github.com/bevyengine/bevy/issues/9440
## Solution
- Remove the doc string mentioning the position of a `NodeBundle`, since
the doc string for the `style` component already explains this ability.
# Objective
- When spawning a window, it will be white until the GPU is ready to
draw the app. To avoid this, we can make the window invisible and then
make it visible once the gpu is ready. Unfortunately, the visible flag
is not available to users.
## Solution
- Let users change the visible flag
## Notes
This is only user controlled. It would be nice if it was done
automatically by bevy instead but I want to keep this PR simple.
# Objective
PR #6360 changed `TaskPoolOptions` so it is no longer used as a
Resource, but didn't remove the `Resource` derive.
## Solution
Remove the Resource derive from `TaskPoolOptions`, as it is no longer
needed. Also add a Debug derive, because it didn't have it before.
---
## Changelog
- `TaskPoolOptions` no longer derives Resource, and `TaskPoolOptions` &
`TaskPoolThreadAssignmentPolicy` now derive Debug.
## Migration Guide
If for some reason anyone is still using `TaskPoolOptions` as a
Resource, they would now have to use a wrapper type:
```rust
#[derive(Resource)]
pub struct MyTaskPoolOptions(pub TaskPoolOptions);
```
# Objective
Add `GamepadButtonInput` event
Resolves#8988
## Solution
- Add `GamepadButtonInput` type
- Emit `GamepadButtonInput` events whenever `Input<GamepadButton>` is
written to
- Update example
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Fixes#9488
## Solution
Set point light radius to always be 0.0. Reading this value from glTF
would require using application specific extras property.
---
## Changelog
### Fixed
- #9488 Point Lights use Range for Radius when importing from GLTF
# Objective
Allow users to specify the power preference when selecting a wgpu
adapter, which is useful for testing or workaround purposes, and makes
the behaviour consistent with the already present check for
`WGPU_BACKEND`.
## Solution
In `WgpuSettings::default()`, allow users to specify the
`WGPU_POWER_PREF` to affect the wgpu adapter choice.
# Objective
fix#9452
when multiple assets are queued to a preregistered loader, only one gets
unblocked when the real loader is registered.
## Solution
i thought async_channel receivers worked like broadcast channels, but in
fact the notification is only received by a single receiver, so only a
single waiting asset is unblocked. close the sender instead so that all
blocked receivers are unblocked.
If a line has one point behind the camera(near plane) then it would
deform or, if the `depth_bias` setting was set to a negative value,
disappear.
## Solution
The issue is that performing a perspective divide does not work
correctly for points behind the near plane and a perspective divide is
used inside the shader to define the line width in screen space.
The solution is to perform near plane clipping manually inside the
shader before the perspective divide is done.
