# Objective
The way `bevy_app` works was changed unnecessarily in #9826 whose
changes should have been specific to `bevy_winit`.
I'm somewhat disappointed that happened and we can see in
https://github.com/bevyengine/bevy/pull/10195 that it made things more
complicated.
Even worse, in #10385 it's clear that this breaks the clean abstraction
over another engine someone built with Bevy!
Fixes#10385.
## Solution
- Move the changes made to `bevy_app` in #9826 to `bevy_winit`
- Revert the changes to `ScheduleRunnerPlugin` and the `run_once` runner
in #10195 as they're no longer necessary.
While this code is breaking relative to `0.12.0`, it reverts the
behavior of `bevy_app` back to how it was in `0.11`.
Due to the nature of the breakage relative to `0.11` I hope this will be
considered for `0.12.1`.
# Objective
- Fixes#10532
## Solution
I've updated the various `Event` send methods to return the sent
`EventId`(s). Since these methods previously returned nothing, and this
information is cheap to copy, there should be minimal negative
consequences to providing this additional information. In the case of
`send_batch`, an iterator is returned built from `Range` and `Map`,
which only consumes 16 bytes on the stack with no heap allocations for
all batch sizes. As such, the cost of this information is negligible.
These changes are reflected for `EventWriter` and `World`. For `World`,
the return types are optional to account for the possible lack of an
`Events` resource. Again, these methods previously returned no
information, so its inclusion should only be a benefit.
## Usage
Now when sending events, the IDs of those events is available for
immediate use:
```rust
// Example of a request-response system where the requester can track handled requests.
/// A system which can make and track requests
fn requester(
mut requests: EventWriter<Request>,
mut handled: EventReader<Handled>,
mut pending: Local<HashSet<EventId<Request>>>,
) {
// Check status of previous requests
for Handled(id) in handled.read() {
pending.remove(&id);
}
if !pending.is_empty() {
error!("Not all my requests were handled on the previous frame!");
pending.clear();
}
// Send a new request and remember its ID for later
let request_id = requests.send(Request::MyRequest { /* ... */ });
pending.insert(request_id);
}
/// A system which handles requests
fn responder(
mut requests: EventReader<Request>,
mut handled: EventWriter<Handled>,
) {
for (request, id) in requests.read_with_id() {
if handle(request).is_ok() {
handled.send(Handled(id));
}
}
}
```
In the above example, a `requester` system can send request events, and
keep track of which ones are currently pending by `EventId`. Then, a
`responder` system can act on that event, providing the ID as a
reference that the `requester` can use. Before this PR, it was not
trivial for a system sending events to keep track of events by ID. This
is unfortunate, since for a system reading events, it is trivial to
access the ID of a event.
---
## Changelog
- Updated `Events`:
- Added `send_batch`
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `EventWriter`
- Modified `send_batch` to return all sent `EventId`s
- Modified `send` to return the sent `EventId`
- Modified `send_default` to return the sent `EventId`
- Updated `World`
- Modified `send_event` to return the sent `EventId` if sent, otherwise
`None`.
- Modified `send_event_default` to return the sent `EventId` if sent,
otherwise `None`.
- Modified `send_event_batch` to return all sent `EventId`s if sent,
otherwise `None`.
- Added unit test `test_send_events_ids` to ensure returned `EventId`s
match the sent `Event`s
- Updated uses of modified methods.
## Migration Guide
### `send` / `send_default` / `send_batch`
For the following methods:
- `Events::send`
- `Events::send_default`
- `Events::send_batch`
- `EventWriter::send`
- `EventWriter::send_default`
- `EventWriter::send_batch`
- `World::send_event`
- `World::send_event_default`
- `World::send_event_batch`
Ensure calls to these methods either handle the returned value, or
suppress the result with `;`.
```rust
// Now fails to compile due to mismatched return type
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default()
}
// Fix
fn send_my_event(mut events: EventWriter<MyEvent>) {
events.send_default();
}
```
This will most likely be noticed within `match` statements:
```rust
// Before
match is_pressed {
true => events.send(PlayerAction::Fire),
// ^--^ No longer returns ()
false => {}
}
// After
match is_pressed {
true => {
events.send(PlayerAction::Fire);
},
false => {}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Preparing next release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Adopt #10239 to get it in time for the release
- Fix accessibility on macOS and linux
## Solution
- call `on_event` from AcccessKit adapter on winit events
---------
Co-authored-by: Nolan Darilek <nolan@thewordnerd.info>
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Remove special cases where `clippy::doc_markdown` lint is disabled.
## Solution
- Add default values back into `clippy.toml` by adding `".."` to the
list of `doc-valid-idents`.
- Add `"VSync"` and `"WebGL2"` to the list of `doc-valid-idents`.
- Remove all instances where `clippy::doc_markdown` is allowed.
- Fix `max_mip` formatting so that there isn't a warning.
# Objective
- Handle pausing audio when Android app is suspended
## Solution
- This is the start of application lifetime events. They are mostly
useful on mobile
- Next version of winit should add a few more
- When application is suspended, send an event to notify the
application, and run the schedule one last time before actually
suspending the app
- Audio is now suspended too 🎉https://github.com/bevyengine/bevy/assets/8672791/d74e2e09-ee29-4f40-adf2-36a0c064f94e
---------
Co-authored-by: Marco Buono <418473+coreh@users.noreply.github.com>
# Objective
- After #9826, there are issues on "run once runners"
- example `without_winit` crashes:
```
2023-10-19T22:06:01.810019Z INFO bevy_render::renderer: AdapterInfo { name: "llvmpipe (LLVM 15.0.7, 256 bits)", vendor: 65541, device: 0, device_type: Cpu, driver: "llvmpipe", driver_info: "Mesa 23.2.1 - kisak-mesa PPA (LLVM 15.0.7)", backend: Vulkan }
2023-10-19T22:06:02.860331Z WARN bevy_audio::audio_output: No audio device found.
2023-10-19T22:06:03.215154Z INFO bevy_diagnostic::system_information_diagnostics_plugin::internal: SystemInfo { os: "Linux 22.04 Ubuntu", kernel: "6.2.0-1014-azure", cpu: "Intel(R) Xeon(R) CPU E5-2673 v3 @ 2.40GHz", core_count: "2", memory: "6.8 GiB" }
thread 'main' panicked at crates/bevy_render/src/pipelined_rendering.rs:91:14:
Unable to get RenderApp. Another plugin may have removed the RenderApp before PipelinedRenderingPlugin
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
- example `headless` runs the app twice with the `run_once` schedule
## Solution
- Expose a more complex state of an app than just "ready"
- Also block adding plugins to an app after it has finished or cleaned
up its plugins as that wouldn't work anyway
## Migration Guide
* `app.ready()` has been replaced by `app.plugins_state()` which will
return more details on the current state of plugins in the app
# Objective
This PR addresses the issue where Bevy displays one or several black
frames before the scene is first rendered. This is particularly
noticeable on iOS, where the black frames disrupt the transition from
the launch screen to the game UI. I have written about my search to
solve this issue on the Bevy discord:
https://discord.com/channels/691052431525675048/1151047604520632352
While I can attest this PR works on both iOS and Linux/Wayland (and even
seems to resolve a slight flicker during startup with the latter as
well), I'm not familiar enough with Bevy to judge the full implications
of these changes. I hope a reviewer or tester can help me confirm
whether this is the right approach, or what might be a cleaner solution
to resolve this issue.
## Solution
I have moved the "startup phase" as well as the plugin finalization into
the `app.run()` function so those things finish synchronously before the
"main schedule" starts. I even move one frame forward as well, using
`app.update()`, to make sure the rendering has caught up with the state
of the finalized plugins as well.
I admit that part of this was achieved through trial-and-error, since
not doing the "startup phase" *before* `app.finish()` resulted in
panics, while not calling an extra `app.update()` didn't fully resolve
the issue.
What I *can* say, is that the iOS launch screen animation works in such
a way that the OS initiates the transition once the framework's
[`didFinishLaunching()`](https://developer.apple.com/documentation/uikit/uiapplicationdelegate/1622921-application)
returns, meaning app developers **must** finish setting up their UI
before that function returns. This is what basically led me on the path
to try to "finish stuff earlier" :)
## Changelog
### Changed
- The startup phase and the first frame are rendered synchronously when
calling `app.run()`, before the "main schedule" is started. This fixes
black frames during the iOS launch transition and possible flickering on
other platforms, but may affect initialization order in your
application.
## Migration Guide
Because of this change, the timing of the first few frames might have
changed, and I think it could be that some things one may expect to be
initialized in a system may no longer be. To be honest, I feel out of my
depth to judge the exact impact here.
# Objective
Allow Bevy apps to run without requiring to start from the main thread.
This allows other projects and applications to do things like spawning a
normal or scoped
thread and run Bevy applications there.
The current behaviour if you try this is a panic.
## Solution
Allow this by default on platforms winit supports this behaviour on
(x11, Wayland, Windows).
---
## Changelog
### Added
- Added the ability to start Bevy apps outside of the main thread on
x11, Wayland, Windows
---------
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Signed-off-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: Torstein Grindvik <torstein.grindvik@muybridge.com>
Co-authored-by: James Liu <contact@jamessliu.com>
# Objective
- Updates for rust 1.73
## Solution
- new doc check for `redundant_explicit_links`
- updated to text for compile fail tests
---
## Changelog
- updates for rust 1.73
# Objective
`bevy_a11y` was impossible to integrate into some third-party projects
in part because it insisted on managing the accessibility tree on its
own.
## Solution
The changes in this PR were necessary to get `bevy_egui` working with
Bevy's AccessKit integration. They were tested on a fork of 0.11,
developed against `bevy_egui`, then ported to main and tested against
the `ui` example.
## Changelog
### Changed
* Add `bevy_a11y::ManageAccessibilityUpdates` to indicate whether the
ECS should manage accessibility tree updates.
* Add getter/setter to `bevy_a11y::AccessibilityRequested`.
* Add `bevy_a11y::AccessibilitySystem` `SystemSet` for ordering relative
to accessibility tree updates.
* Upgrade `accesskit` to v0.12.0.
### Fixed
* Correctly set initial accessibility focus to new windows on creation.
## Migration Guide
### Change direct accesses of `AccessibilityRequested` to use
`AccessibilityRequested.::get()`/`AccessibilityRequested::set()`
#### Before
```
use std::sync::atomic::Ordering;
// To access
accessibility_requested.load(Ordering::SeqCst)
// To update
accessibility_requested.store(true, Ordering::SeqCst);
```
#### After
```
// To access
accessibility_requested.get()
// To update
accessibility_requested.set(true);
```
---------
Co-authored-by: StaffEngineer <111751109+StaffEngineer@users.noreply.github.com>
# Objective
- Handle suspend / resume events on Android without exiting
## Solution
- On suspend: despawn the window, and set the control flow to wait for
events from the OS
- On resume: spawn a new window, and set the control flow to poll
In this video, you can see the Android example being suspended, stopping
receiving events, and working again after being resumed
https://github.com/bevyengine/bevy/assets/8672791/aaaf4b09-ee6a-4a0d-87ad-41f05def7945
# Objective
Improve compatibility with macOS Sonoma and Xcode 15.0.
## Solution
- Adds the workaround by @ptxmac to ignore the invalid window sizes
provided by `winit` on macOS 14.0
- This still provides a slightly wrong content size when resizing (it
fails to account for the window title bar, so some content gets clipped
at the bottom) but it's _much better_ than crashing.
- Adds docs on how to work around the `bindgen` bug on Xcode 15.0.
## Related Issues:
- https://github.com/RustAudio/coreaudio-sys/issues/85
- https://github.com/rust-windowing/winit/issues/2876
---
## Changelog
- Added a workaround for a `winit`-related crash under macOS Sonoma
(14.0)
---------
Co-authored-by: Peter Kristensen <peter@ptx.dk>
# Objective
- https://github.com/bevyengine/bevy/pull/7609 broke Android support
```
8721 8770 I event crates/bevy_winit/src/system.rs:55: Creating new window "App" (0v0)
8721 8769 I RustStdoutStderr: thread '<unnamed>' panicked at 'Cannot get the native window, it's null and will always be null before Event::Resumed and after Event::Suspended. Make sure you only call this function between those events.', winit-0.28.6/src/platform_impl/android/mod.rs:1058:13
```
## Solution
- Don't create windows on `StartCause::Init` as it's too early
# Objective
Replace instances of
```rust
for x in collection.iter{_mut}() {
```
with
```rust
for x in &{mut} collection {
```
This also changes CI to no longer suppress this lint. Note that since
this lint only shows up when using clippy in pedantic mode, it was
probably unnecessary to suppress this lint in the first place.
# Objective
Rename RemovedComponents::iter/iter_with_id to read/read_with_id to make
it clear that it consume the data
Fixes#9755.
(It's my first pull request, if i've made any mistake, please let me
know)
## Solution
Refactor RemovedComponents::iter/iter_with_id to read/read_with_id
## Changelog
Refactor RemovedComponents::iter/iter_with_id to read/read_with_id
Deprecate RemovedComponents::iter/iter_with_id
Remove IntoIterator implementation
Update removal_detection example accordingly
---
## Migration Guide
Rename calls of RemovedComponents::iter/iter_with_id to
read/read_with_id
Replace IntoIterator iteration (&mut <RemovedComponents>) with .read()
---------
Co-authored-by: denshi_ika <mojang2824@gmail.com>
# Objective
I've been collecting some mistakes in the documentation and fixed them
---------
Co-authored-by: Emi <emanuel.boehm@gmail.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
# Objective
- The current `EventReader::iter` has been determined to cause confusion
among new Bevy users. It was suggested by @JoJoJet to rename the method
to better clarify its usage.
- Solves #9624
## Solution
- Rename `EventReader::iter` to `EventReader::read`.
- Rename `EventReader::iter_with_id` to `EventReader::read_with_id`.
- Rename `ManualEventReader::iter` to `ManualEventReader::read`.
- Rename `ManualEventReader::iter_with_id` to
`ManualEventReader::read_with_id`.
---
## Changelog
- `EventReader::iter` has been renamed to `EventReader::read`.
- `EventReader::iter_with_id` has been renamed to
`EventReader::read_with_id`.
- `ManualEventReader::iter` has been renamed to
`ManualEventReader::read`.
- `ManualEventReader::iter_with_id` has been renamed to
`ManualEventReader::read_with_id`.
- Deprecated `EventReader::iter`
- Deprecated `EventReader::iter_with_id`
- Deprecated `ManualEventReader::iter`
- Deprecated `ManualEventReader::iter_with_id`
## Migration Guide
- Existing usages of `EventReader::iter` and `EventReader::iter_with_id`
will have to be changed to `EventReader::read` and
`EventReader::read_with_id` respectively.
- Existing usages of `ManualEventReader::iter` and
`ManualEventReader::iter_with_id` will have to be changed to
`ManualEventReader::read` and `ManualEventReader::read_with_id`
respectively.
# Objective
[Rust 1.72.0](https://blog.rust-lang.org/2023/08/24/Rust-1.72.0.html) is
now stable.
# Notes
- `let-else` formatting has arrived!
- I chose to allow `explicit_iter_loop` due to
https://github.com/rust-lang/rust-clippy/issues/11074.
We didn't hit any of the false positives that prevent compilation, but
fixing this did produce a lot of the "symbol soup" mentioned, e.g. `for
image in &mut *image_events {`.
Happy to undo this if there's consensus the other way.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
- When spawning a window, it will be white until the GPU is ready to
draw the app. To avoid this, we can make the window invisible and then
make it visible once the gpu is ready. Unfortunately, the visible flag
is not available to users.
## Solution
- Let users change the visible flag
## Notes
This is only user controlled. It would be nice if it was done
automatically by bevy instead but I want to keep this PR simple.
# Objective
Fixes#9455
This change has probably been forgotten in
https://github.com/bevyengine/bevy/pull/8306.
## Solution
Remove the inversion of the Y axis when propagates window change back to
winit.
Fixes#5856. Fixes#8080. Fixes#9040.
# Objective
We need to limit the update rate of games whose windows are not visible
(minimized or completely occluded). Compositors typically ignore the
VSync settings of windows that aren't visible. That, combined with the
lack of rendering work, results in a scenario where an app becomes
completely CPU-bound and starts updating without limit.
There are currently three update modes.
- `Continuous` updates an app as often as possible.
- `Reactive` updates when new window or device events have appeared, a
timer expires, or a redraw is requested.
- `ReactiveLowPower` is the same as `Reactive` except it ignores device
events (e.g. general mouse movement).
The problem is that the default "game" settings are set to `Contiuous`
even when no windows are visible.
### More Context
- https://github.com/libsdl-org/SDL/issues/1871
- https://github.com/glfw/glfw/issues/680
- https://github.com/godotengine/godot/issues/19741
- https://github.com/godotengine/godot/issues/64708
## Solution
Change the default "unfocused" `UpdateMode` for games to
`ReactiveLowPower` just like desktop apps. This way, even when the
window is occluded, the app still updates at a sensible rate or if
something about the window changes. I chose 20Hz arbitrarily.
Redo of #7590 since I messed up my branch.
# Objective
- Revise docs.
- Refactor event loop code a little bit to make it easier to follow.
## Solution
- Do the above.
---
### Migration Guide
- `UpdateMode::Reactive { max_wait: .. }` -> `UpdateMode::Reactive {
wait: .. }`
- `UpdateMode::ReactiveLowPower { max_wait: .. }` ->
`UpdateMode::ReactiveLowPower { wait: .. }`
---------
Co-authored-by: Sélène Amanita <134181069+Selene-Amanita@users.noreply.github.com>
# Objective
Implements #9082 but with an option to toggle minimize and close buttons
too.
## Solution
- Added an `enabled_buttons` member to the `Window` struct through which
users can enable or disable specific window control buttons.
---
## Changelog
- Added an `enabled_buttons` member to the `Window` struct through which
users can enable or disable specific window control buttons.
- Added a new system to the `window_settings` example which demonstrates
the toggling functionality.
---
## Migration guide
- Added an `enabled_buttons` member to the `Window` struct through which
users can enable or disable specific window control buttons.
CI-capable version of #9086
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
I created this manually as Github didn't want to run CI for the
workflow-generated PR. I'm guessing we didn't hit this in previous
releases because we used bors.
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
# Objective
- accesskit_unix is not optional anymore
## Solution
- Enable `async-io` feature of `accesskit_winit` only when
`accesskit_unix` is enabled
# Objective
`accesskit` and `accesskit_winit` need to be upgraded.
## Solution
Upgrade `accesskit` and `accesskit_winit`.
---
## Changelog
### Changed
* Upgrade accesskit to v0.11.
* Upgrade accesskit_winit to v0.14.
# Objective
I'm creating an iOS game and had to find a way to persist game state
when the application is terminated. This required listening to the
[`applicationWillTerminate()`
method](https://developer.apple.com/documentation/uikit/uiapplicationdelegate/1623111-applicationwillterminate),
but I cannot do so myself anymore since `winit` already set up a
delegate to listen for it, and there can be only one delegate.
So I had to move up the stack and try to respond to one of the events
from `winit` instead. It appears `winit` fires two events that could
serve my purpose: `WindowEvent::Destroyed` and `Event::LoopDestroyed`.
It seemed to me the former might be slightly more generally useful, and
I also found a past discussion that suggested it would be appropriate
for Bevy to have a `WindowDestroyed` event:
https://github.com/bevyengine/bevy/pull/5589#discussion_r942811021
## Solution
- I've added the `WindowDestroyed` event, which fires when `winit` fires
`WindowEvent::Destroyed`.
---
## Changelog
### Added
- Introduced a new `WindowDestroyed` event type. It is used to indicate
a window has been destroyed by the windowing system.
# Objective
- Better consistency with `add_systems`.
- Deprecating `add_plugin` in favor of a more powerful `add_plugins`.
- Allow passing `Plugin` to `add_plugins`.
- Allow passing tuples to `add_plugins`.
## Solution
- `App::add_plugins` now takes an `impl Plugins` parameter.
- `App::add_plugin` is deprecated.
- `Plugins` is a new sealed trait that is only implemented for `Plugin`,
`PluginGroup` and tuples over `Plugins`.
- All examples, benchmarks and tests are changed to use `add_plugins`,
using tuples where appropriate.
---
## Changelog
### Changed
- `App::add_plugins` now accepts all types that implement `Plugins`,
which is implemented for:
- Types that implement `Plugin`.
- Types that implement `PluginGroup`.
- Tuples (up to 16 elements) over types that implement `Plugins`.
- Deprecated `App::add_plugin` in favor of `App::add_plugins`.
## Migration Guide
- Replace `app.add_plugin(plugin)` calls with `app.add_plugins(plugin)`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Document android code that is currently causing clippy warnings due to
not being documented
## Solution
- Document the two previously undocumented items
# Objective
The goal of this PR is to receive touchpad magnification and rotation
events.
## Solution
Implement pendants for winit's `TouchpadMagnify` and `TouchpadRotate`
events.
Adjust the `mouse_input_events.rs` example to debug magnify and rotate
events.
Since winit only reports these events on macOS, the Bevy events for
touchpad magnification and rotation are currently only fired on macOS.
# Objective
Be consistent with `Resource`s and `Components` and have `Event` types
be more self-documenting.
Although not susceptible to accidentally using a function instead of a
value due to `Event`s only being initialized by their type, much of the
same reasoning for removing the blanket impl on `Resource` also applies
here.
* Not immediately obvious if a type is intended to be an event
* Prevent invisible conflicts if the same third-party or primitive types
are used as events
* Allows for further extensions (e.g. opt-in warning for missed events)
## Solution
Remove the blanket impl for the `Event` trait. Add a derive macro for
it.
---
## Changelog
- `Event` is no longer implemented for all applicable types. Add the
`#[derive(Event)]` macro for events.
## Migration Guide
* Add the `#[derive(Event)]` macro for events. Third-party types used as
events should be wrapped in a newtype.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/8586.
## Solution
- Add `preferred_theme` field to `Window` and set it when window
creation
- Add `window_theme` field to `InternalWindowState` to store current
window theme
- Expose winit `WindowThemeChanged` event
---------
Co-authored-by: hate <15314665+hate@users.noreply.github.com>
Co-authored-by: Nicola Papale <nicopap@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
- Fix Wayland window client side decorations issue on Gnome Wayland,
fixes#3301.
## Solution
- One simple one line solution: Add winit's `wayland-csd-adwaita`
feature to Bevy's `wayland` feature.
Copied from
https://github.com/bevyengine/bevy/issues/3301#issuecomment-1569611257:
### Investigation
1. Gnome forced Wayland apps to implement CSD, whether on their own or
using some libraries like Gnome's official solution
[libdecor](https://gitlab.freedesktop.org/libdecor/libdecor). Many Linux
apps do this with libdecor, like blender, kitty... I think it's not
comfortable for Bevy to fix this problem this way.
2. Winit has support for CSD on
wayland(8bb004a1d9/Cargo.toml (L42)),
but Bevy disabled Winit's default features, thus no winit's
`wayland-csd-adwaita` feature. And Bevy's `wayland` feature doesn't
include winit's `wayland-csd-adwaita` feature so users can't get window
decorations on Wayland even with Bevy's `wayland` feature enabled.
3. Many rust UI toolkit, like iced, doesn't disable winit's
`wayland-csd-adwaita` feature.
### Conclusion and one Possible solution
Bevy disabled `winit`'s default features in order to decrease package
size. But I think it's acceptable to add `winit`'s `wayland-csd-adwaita`
feature to Bevy's `wayland` feature gate to fix this issue easily for
this only add on crate: sctk-adwaita.
# Objective
- Support WebGPU
- alternative to #5027 that doesn't need any async / await
- fixes#8315
- Surprise fix#7318
## Solution
### For async renderer initialisation
- Update the plugin lifecycle:
- app builds the plugin
- calls `plugin.build`
- registers the plugin
- app starts the event loop
- event loop waits for `ready` of all registered plugins in the same
order
- returns `true` by default
- then call all `finish` then all `cleanup` in the same order as
registered
- then execute the schedule
In the case of the renderer, to avoid anything async:
- building the renderer plugin creates a detached task that will send
back the initialised renderer through a mutex in a resource
- `ready` will wait for the renderer to be present in the resource
- `finish` will take that renderer and place it in the expected
resources by other plugins
- other plugins (that expect the renderer to be available) `finish` are
called and they are able to set up their pipelines
- `cleanup` is called, only custom one is still for pipeline rendering
### For WebGPU support
- update the `build-wasm-example` script to support passing `--api
webgpu` that will build the example with WebGPU support
- feature for webgl2 was always enabled when building for wasm. it's now
in the default feature list and enabled on all platforms, so check for
this feature must also check that the target_arch is `wasm32`
---
## Migration Guide
- `Plugin::setup` has been renamed `Plugin::cleanup`
- `Plugin::finish` has been added, and plugins adding pipelines should
do it in this function instead of `Plugin::build`
```rust
// Before
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>()
.init_resource::<OtherRenderResource>();
}
}
// After
impl Plugin for MyPlugin {
fn build(&self, app: &mut App) {
app.insert_resource::<MyResource>
.add_systems(Update, my_system);
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<OtherRenderResource>();
}
fn finish(&self, app: &mut App) {
let render_app = match app.get_sub_app_mut(RenderApp) {
Ok(render_app) => render_app,
Err(_) => return,
};
render_app
.init_resource::<RenderResourceNeedingDevice>();
}
}
```
Links in the api docs are nice. I noticed that there were several places
where structs / functions and other things were referenced in the docs,
but weren't linked. I added the links where possible / logical.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: François <mockersf@gmail.com>
# Objective
The clippy lint `type_complexity` is known not to play well with bevy.
It frequently triggers when writing complex queries, and taking the
lint's advice of using a type alias almost always just obfuscates the
code with no benefit. Because of this, this lint is currently ignored in
CI, but unfortunately it still shows up when viewing bevy code in an
IDE.
As someone who's made a fair amount of pull requests to this repo, I
will say that this issue has been a consistent thorn in my side. Since
bevy code is filled with spurious, ignorable warnings, it can be very
difficult to spot the *real* warnings that must be fixed -- most of the
time I just ignore all warnings, only to later find out that one of them
was real after I'm done when CI runs.
## Solution
Suppress this lint in all bevy crates. This was previously attempted in
#7050, but the review process ended up making it more complicated than
it needs to be and landed on a subpar solution.
The discussion in https://github.com/rust-lang/rust-clippy/pull/10571
explores some better long-term solutions to this problem. Since there is
no timeline on when these solutions may land, we should resolve this
issue in the meantime by locally suppressing these lints.
### Unresolved issues
Currently, these lints are not suppressed in our examples, since that
would require suppressing the lint in every single source file. They are
still ignored in CI.
# Objective
Make the coordinate systems of screen-space items (cursor position, UI,
viewports, etc.) consistent.
## Solution
Remove the weird double inversion of the cursor position's Y origin.
Once in bevy_winit to the bottom and then again in bevy_ui back to the
top.
This leaves the origin at the top left like it is in every other popular
app framework.
Update the `world_to_viewport`, `viewport_to_world`, and
`viewport_to_world_2d` methods to flip the Y origin (as they should
since the viewport coordinates were always relative to the top left).
## Migration Guide
`Window::cursor_position` now returns the position of the cursor
relative to the top left instead of the bottom left.
This now matches other screen-space coordinates like
`RelativeCursorPosition`, UI, and viewports.
The `world_to_viewport`, `viewport_to_world`, and `viewport_to_world_2d`
methods on `Camera` now return/take the viewport position relative to
the top left instead of the bottom left.
If you were using `world_to_viewport` to position a UI node the returned
`y` value should now be passed into the `top` field on `Style` instead
of the `bottom` field.
Note that this might shift the position of the UI node as it is now
anchored at the top.
If you were passing `Window::cursor_position` to `viewport_to_world` or
`viewport_to_world_2d` no change is necessary.
# Objective
In the
[`Text`](3442a13d2c/crates/bevy_text/src/text.rs (L18))
struct the field is named: `linebreak_behaviour`, the British spelling
of _behavior_.
**Update**, also found:
- `FileDragAndDrop::HoveredFileCancelled`
- `TouchPhase::Cancelled`
- `Touches.just_cancelled`
The majority of all spelling is in the US but when you have a lot of
contributors across the world, sometimes
spelling differences can pop up in APIs such as in this case.
For consistency, I think it would be worth a while to ensure that the
API is persistent.
Some examples:
`from_reflect.rs` has `DefaultBehavior`
TextStyle has `color` and uses the `Color` struct.
In `bevy_input/src/Touch.rs` `TouchPhase::Cancelled` and _canceled_ are
used interchangeably in the documentation
I've found that there is also the same type of discrepancies in the
documentation, though this is a low priority but is worth checking.
**Update**: I've now checked the documentation (See #8291)
## Solution
I've only renamed the inconsistencies that have breaking changes and
documentation pertaining to them. The rest of the documentation will be
changed via #8291.
Do note that the winit API is written with UK spelling, thus this may be
a cause for confusion:
`winit::event::TouchPhase::Cancelled => TouchPhase::Canceled`
`winit::event::WindowEvent::HoveredFileCancelled` -> Related to
`FileDragAndDrop::HoveredFileCanceled`
But I'm hoping to maybe outline other spelling inconsistencies in the
API, and maybe an addition to the contribution guide.
---
## Changelog
- `Text` field `linebreak_behaviour` has been renamed to
`linebreak_behavior`.
- Event `FileDragAndDrop::HoveredFileCancelled` has been renamed to
`HoveredFileCanceled`
- Function `Touches.just_cancelled` has been renamed to
`Touches.just_canceled`
- Event `TouchPhase::Cancelled` has been renamed to
`TouchPhase::Canceled`
## Migration Guide
Update where `linebreak_behaviour` is used to `linebreak_behavior`
Updated the event `FileDragAndDrop::HoveredFileCancelled` where used to
`HoveredFileCanceled`
Update `Touches.just_cancelled` where used as `Touches.just_canceled`
The event `TouchPhase::Cancelled` is now called `TouchPhase::Canceled`
# Objective
Documentation should no longer be using pre-stageless terminology to
avoid confusion.
## Solution
- update all docs referring to stages to instead refer to sets/schedules
where appropriate
- also mention `apply_system_buffers` for anything system-buffer-related
that previously referred to buffers being applied "at the end of a
stage"
# Objective
UIs created for Bevy cannot currently be made accessible. This PR aims to address that.
## Solution
Integrate AccessKit as a dependency, adding accessibility support to existing bevy_ui widgets.
## Changelog
### Added
* Integrate with and expose [AccessKit](https://accesskit.dev) for platform accessibility.
* Add `Label` for marking text specifically as a label for UI controls.
# Objective
- Fixes#7612
- Since #7493, windows started as unfocused
## Solution
- Creating the window at the end of the event loop after the resume event instead of at the beginning of the loop of the next event fixes the focus
# Objective
Fix#7377Fix#7513
## Solution
Record the changes made to the Bevy `Window` from `winit` as 'canon' to avoid Bevy sending those changes back to `winit` again, causing a feedback loop.
## Changelog
* Removed `ModifiesWindows` system label.
Neither `despawn_window` nor `changed_window` actually modify the `Window` component so all the `.after(ModifiesWindows)` shouldn't be necessary.
* Moved `changed_window` and `despawn_window` systems to `CoreStage::Last` to avoid systems making changes to the `Window` between `changed_window` and the end of the frame as they would be ignored.
## Migration Guide
The `ModifiesWindows` system label was removed.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Merge the examples on iOS and Android
- Make sure they both work from the same code
## Solution
- don't create window when not in an active state (from #6830)
- exit on suspend on Android (from #6830)
- automatically enable dependency feature of bevy_audio on android so that it works out of the box
- don't inverse y position of touch events
- reuse the same example for both Android and iOS
Fixes#4616Fixes#4103Fixes#3648Fixes#3458Fixes#3249Fixes#86
# Objective
NOTE: This depends on #7267 and should not be merged until #7267 is merged. If you are reviewing this before that is merged, I highly recommend viewing the Base Sets commit instead of trying to find my changes amongst those from #7267.
"Default sets" as described by the [Stageless RFC](https://github.com/bevyengine/rfcs/pull/45) have some [unfortunate consequences](https://github.com/bevyengine/bevy/discussions/7365).
## Solution
This adds "base sets" as a variant of `SystemSet`:
A set is a "base set" if `SystemSet::is_base` returns `true`. Typically this will be opted-in to using the `SystemSet` derive:
```rust
#[derive(SystemSet, Clone, Hash, Debug, PartialEq, Eq)]
#[system_set(base)]
enum MyBaseSet {
A,
B,
}
```
**Base sets are exclusive**: a system can belong to at most one "base set". Adding a system to more than one will result in an error. When possible we fail immediately during system-config-time with a nice file + line number. For the more nested graph-ey cases, this will fail at the final schedule build.
**Base sets cannot belong to other sets**: this is where the word "base" comes from
Systems and Sets can only be added to base sets using `in_base_set`. Calling `in_set` with a base set will fail. As will calling `in_base_set` with a normal set.
```rust
app.add_system(foo.in_base_set(MyBaseSet::A))
// X must be a normal set ... base sets cannot be added to base sets
.configure_set(X.in_base_set(MyBaseSet::A))
```
Base sets can still be configured like normal sets:
```rust
app.add_system(MyBaseSet::B.after(MyBaseSet::Ap))
```
The primary use case for base sets is enabling a "default base set":
```rust
schedule.set_default_base_set(CoreSet::Update)
// this will belong to CoreSet::Update by default
.add_system(foo)
// this will override the default base set with PostUpdate
.add_system(bar.in_base_set(CoreSet::PostUpdate))
```
This allows us to build apis that work by default in the standard Bevy style. This is a rough analog to the "default stage" model, but it use the new "stageless sets" model instead, with all of the ordering flexibility (including exclusive systems) that it provides.
---
## Changelog
- Added "base sets" and ported CoreSet to use them.
## Migration Guide
TODO
Huge thanks to @maniwani, @devil-ira, @hymm, @cart, @superdump and @jakobhellermann for the help with this PR.
# Objective
- Followup #6587.
- Minimal integration for the Stageless Scheduling RFC: https://github.com/bevyengine/rfcs/pull/45
## Solution
- [x] Remove old scheduling module
- [x] Migrate new methods to no longer use extension methods
- [x] Fix compiler errors
- [x] Fix benchmarks
- [x] Fix examples
- [x] Fix docs
- [x] Fix tests
## Changelog
### Added
- a large number of methods on `App` to work with schedules ergonomically
- the `CoreSchedule` enum
- `App::add_extract_system` via the `RenderingAppExtension` trait extension method
- the private `prepare_view_uniforms` system now has a public system set for scheduling purposes, called `ViewSet::PrepareUniforms`
### Removed
- stages, and all code that mentions stages
- states have been dramatically simplified, and no longer use a stack
- `RunCriteriaLabel`
- `AsSystemLabel` trait
- `on_hierarchy_reports_enabled` run criteria (now just uses an ad hoc resource checking run condition)
- systems in `RenderSet/Stage::Extract` no longer warn when they do not read data from the main world
- `RunCriteriaLabel`
- `transform_propagate_system_set`: this was a nonstandard pattern that didn't actually provide enough control. The systems are already `pub`: the docs have been updated to ensure that the third-party usage is clear.
### Changed
- `System::default_labels` is now `System::default_system_sets`.
- `App::add_default_labels` is now `App::add_default_sets`
- `CoreStage` and `StartupStage` enums are now `CoreSet` and `StartupSet`
- `App::add_system_set` was renamed to `App::add_systems`
- The `StartupSchedule` label is now defined as part of the `CoreSchedules` enum
- `.label(SystemLabel)` is now referred to as `.in_set(SystemSet)`
- `SystemLabel` trait was replaced by `SystemSet`
- `SystemTypeIdLabel<T>` was replaced by `SystemSetType<T>`
- The `ReportHierarchyIssue` resource now has a public constructor (`new`), and implements `PartialEq`
- Fixed time steps now use a schedule (`CoreSchedule::FixedTimeStep`) rather than a run criteria.
- Adding rendering extraction systems now panics rather than silently failing if no subapp with the `RenderApp` label is found.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied.
- `SceneSpawnerSystem` now runs under `CoreSet::Update`, rather than `CoreStage::PreUpdate.at_end()`.
- `bevy_pbr::add_clusters` is no longer an exclusive system
- the top level `bevy_ecs::schedule` module was replaced with `bevy_ecs::scheduling`
- `tick_global_task_pools_on_main_thread` is no longer run as an exclusive system. Instead, it has been replaced by `tick_global_task_pools`, which uses a `NonSend` resource to force running on the main thread.
## Migration Guide
- Calls to `.label(MyLabel)` should be replaced with `.in_set(MySet)`
- Stages have been removed. Replace these with system sets, and then add command flushes using the `apply_system_buffers` exclusive system where needed.
- The `CoreStage`, `StartupStage, `RenderStage` and `AssetStage` enums have been replaced with `CoreSet`, `StartupSet, `RenderSet` and `AssetSet`. The same scheduling guarantees have been preserved.
- Systems are no longer added to `CoreSet::Update` by default. Add systems manually if this behavior is needed, although you should consider adding your game logic systems to `CoreSchedule::FixedTimestep` instead for more reliable framerate-independent behavior.
- Similarly, startup systems are no longer part of `StartupSet::Startup` by default. In most cases, this won't matter to you.
- For example, `add_system_to_stage(CoreStage::PostUpdate, my_system)` should be replaced with
- `add_system(my_system.in_set(CoreSet::PostUpdate)`
- When testing systems or otherwise running them in a headless fashion, simply construct and run a schedule using `Schedule::new()` and `World::run_schedule` rather than constructing stages
- Run criteria have been renamed to run conditions. These can now be combined with each other and with states.
- Looping run criteria and state stacks have been removed. Use an exclusive system that runs a schedule if you need this level of control over system control flow.
- For app-level control flow over which schedules get run when (such as for rollback networking), create your own schedule and insert it under the `CoreSchedule::Outer` label.
- Fixed timesteps are now evaluated in a schedule, rather than controlled via run criteria. The `run_fixed_timestep` system runs this schedule between `CoreSet::First` and `CoreSet::PreUpdate` by default.
- Command flush points introduced by `AssetStage` have been removed. If you were relying on these, add them back manually.
- Adding extract systems is now typically done directly on the main app. Make sure the `RenderingAppExtension` trait is in scope, then call `app.add_extract_system(my_system)`.
- the `calculate_bounds` system, with the `CalculateBounds` label, is now in `CoreSet::Update`, rather than in `CoreSet::PostUpdate` before commands are applied. You may need to order your movement systems to occur before this system in order to avoid system order ambiguities in culling behavior.
- the `RenderLabel` `AppLabel` was renamed to `RenderApp` for clarity
- `App::add_state` now takes 0 arguments: the starting state is set based on the `Default` impl.
- Instead of creating `SystemSet` containers for systems that run in stages, simply use `.on_enter::<State::Variant>()` or its `on_exit` or `on_update` siblings.
- `SystemLabel` derives should be replaced with `SystemSet`. You will also need to add the `Debug`, `PartialEq`, `Eq`, and `Hash` traits to satisfy the new trait bounds.
- `with_run_criteria` has been renamed to `run_if`. Run criteria have been renamed to run conditions for clarity, and should now simply return a bool.
- States have been dramatically simplified: there is no longer a "state stack". To queue a transition to the next state, call `NextState::set`
## TODO
- [x] remove dead methods on App and World
- [x] add `App::add_system_to_schedule` and `App::add_systems_to_schedule`
- [x] avoid adding the default system set at inappropriate times
- [x] remove any accidental cycles in the default plugins schedule
- [x] migrate benchmarks
- [x] expose explicit labels for the built-in command flush points
- [x] migrate engine code
- [x] remove all mentions of stages from the docs
- [x] verify docs for States
- [x] fix uses of exclusive systems that use .end / .at_start / .before_commands
- [x] migrate RenderStage and AssetStage
- [x] migrate examples
- [x] ensure that transform propagation is exported in a sufficiently public way (the systems are already pub)
- [x] ensure that on_enter schedules are run at least once before the main app
- [x] re-enable opt-in to execution order ambiguities
- [x] revert change to `update_bounds` to ensure it runs in `PostUpdate`
- [x] test all examples
- [x] unbreak directional lights
- [x] unbreak shadows (see 3d_scene, 3d_shape, lighting, transparaency_3d examples)
- [x] game menu example shows loading screen and menu simultaneously
- [x] display settings menu is a blank screen
- [x] `without_winit` example panics
- [x] ensure all tests pass
- [x] SubApp doc test fails
- [x] runs_spawn_local tasks fails
- [x] [Fix panic_when_hierachy_cycle test hanging](https://github.com/alice-i-cecile/bevy/pull/120)
## Points of Difficulty and Controversy
**Reviewers, please give feedback on these and look closely**
1. Default sets, from the RFC, have been removed. These added a tremendous amount of implicit complexity and result in hard to debug scheduling errors. They're going to be tackled in the form of "base sets" by @cart in a followup.
2. The outer schedule controls which schedule is run when `App::update` is called.
3. I implemented `Label for `Box<dyn Label>` for our label types. This enables us to store schedule labels in concrete form, and then later run them. I ran into the same set of problems when working with one-shot systems. We've previously investigated this pattern in depth, and it does not appear to lead to extra indirection with nested boxes.
4. `SubApp::update` simply runs the default schedule once. This sucks, but this whole API is incomplete and this was the minimal changeset.
5. `time_system` and `tick_global_task_pools_on_main_thread` no longer use exclusive systems to attempt to force scheduling order
6. Implemetnation strategy for fixed timesteps
7. `AssetStage` was migrated to `AssetSet` without reintroducing command flush points. These did not appear to be used, and it's nice to remove these bottlenecks.
8. Migration of `bevy_render/lib.rs` and pipelined rendering. The logic here is unusually tricky, as we have complex scheduling requirements.
## Future Work (ideally before 0.10)
- Rename schedule_v3 module to schedule or scheduling
- Add a derive macro to states, and likely a `EnumIter` trait of some form
- Figure out what exactly to do with the "systems added should basically work by default" problem
- Improve ergonomics for working with fixed timesteps and states
- Polish FixedTime API to match Time
- Rebase and merge #7415
- Resolve all internal ambiguities (blocked on better tools, especially #7442)
- Add "base sets" to replace the removed default sets.
# Objective
Removal events are unwieldy and require some knowledge of when to put systems that need to catch events for them, it is very easy to end up missing one and end up with memory leak-ish issues where you don't clean up after yourself.
## Solution
Consolidate removals with the benefits of `Events<...>` (such as double buffering and per system ticks for reading the events) and reduce the special casing of it, ideally I was hoping to move the removals to a `Resource` in the world, but that seems a bit more rough to implement/maintain because of double mutable borrowing issues.
This doesn't go the full length of change detection esque removal detection a la https://github.com/bevyengine/rfcs/pull/44.
Just tries to make the current workflow a bit more user friendly so detecting removals isn't such a scheduling nightmare.
---
## Changelog
- RemovedComponents<T> is now backed by an `Events<Entity>` for the benefits of double buffering.
## Migration Guide
- Add a `mut` for `removed: RemovedComponents<T>` since we are now modifying an event reader internally.
- Iterating over removed components now requires `&mut removed_components` or `removed_components.iter()` instead of `&removed_components`.
# Objective
- Update winit to 0.28
## Solution
- Small API change
- A security advisory has been added for a unmaintained crate used by a dependency of winit build script for wayland
I didn't do anything for Android support in this PR though it should be fixable, it should be done in a separate one, maybe https://github.com/bevyengine/bevy/pull/6830
---
## Changelog
- `window.always_on_top` has been removed, you can now use `window.window_level`
## Migration Guide
before:
```rust
app.new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
always_on_top: true,
..default()
}),
..default()
}));
```
after:
```rust
app.new()
.add_plugins(DefaultPlugins.set(WindowPlugin {
primary_window: Some(Window {
window_level: bevy:🪟:WindowLevel::AlwaysOnTop,
..default()
}),
..default()
}));
```
# Objective
- Bevy should not have any "internal" execution order ambiguities. These clutter the output of user-facing error reporting, and can result in nasty, nondetermistic, very difficult to solve bugs.
- Verifying this currently involves repeated non-trivial manual work.
## Solution
- [x] add an example to quickly check this
- ~~[ ] ensure that this example panics if there are any unresolved ambiguities~~
- ~~[ ] run the example in CI 😈~~
There's one tricky ambiguity left, between UI and animation. I don't have the tools to fix this without system set configuration, so the remaining work is going to be left to #7267 or another PR after that.
```
2023-01-27T18:38:42.989405Z INFO bevy_ecs::schedule::ambiguity_detection: Execution order ambiguities detected, you might want to add an explicit dependency relation between some of these systems:
* Parallel systems:
-- "bevy_animation::animation_player" and "bevy_ui::flex::flex_node_system"
conflicts: ["bevy_transform::components::transform::Transform"]
```
## Changelog
Resolved internal execution order ambiguities for:
1. Transform propagation (ignored, we need smarter filter checking).
2. Gamepad processing (fixed).
3. bevy_winit's window handling (fixed).
4. Cascaded shadow maps and perspectives (fixed).
Also fixed a desynchronized state bug that could occur when the `Window` component is removed and then added to the same entity in a single frame.
# Objective
- Fix#7315
- Add IME support
## Solution
- Add two new fields to `Window`, to control if IME is enabled and the candidate box position
This allows the use of dead keys which are needed in French, or the full IME experience to type using Pinyin
I also added a basic general text input example that can handle IME input.
https://user-images.githubusercontent.com/8672791/213941353-5ed73a73-5dd1-4e66-a7d6-a69b49694c52.mp4
# Objective
On wasm, bevy applications currently prevent any of the normal browser hotkeys from working normally (Ctrl+R, F12, F5, Ctrl+F5, tab, etc.).
Some of those events you may want to override, perhaps you can hold the tab key for showing in-game stats?
However, if you want to make a well-behaved game, you probably don't want to needlessly prevent that behavior unless you have a good reason.
Secondary motivation: Also, consider the workaround presented here to get audio working: https://developer.chrome.com/blog/web-audio-autoplay/#moving-forward ; It won't work (for keydown events) if we stop event propagation.
## Solution
- Winit has a field that allows it to not stop event propagation, expose it on the window settings to allow the user to choose the desired behavior. Default to `true` for backwards compatibility.
---
## Changelog
- Added `Window::prevent_default_event_handling` . This allows bevy apps to not override default browser behavior on hotkeys like F5, F12, Ctrl+R etc.
# Objective
- Fixes#7294
## Solution
- Do not trigger change detection when setting the cursor position from winit
When moving the cursor continuously, Winit sends events:
- CursorMoved(0)
- CursorMoved(1)
- => start of Bevy schedule execution
- CursorMoved(2)
- CursorMoved(3)
- <= End of Bevy schedule execution
if Bevy schedule runs after the event 1, events 2 and 3 would happen during the execution but would be read only on the next system run. During the execution, the system would detect a change on cursor position, and send back an order to winit to move it back to 1, so event 2 and 3 would be ignored. By bypassing change detection when setting the cursor from winit event, it doesn't trigger sending back that change to winit out of order.
# Objective
- Fixes#7288
- Do not expose access directly to cursor position as it is the physical position, ignoring scale
## Solution
- Make cursor position private
- Expose getter/setter on the window to have access to the scale
# Objective
Fix https://github.com/bevyengine/bevy/issues/4530
- Make it easier to open/close/modify windows by setting them up as `Entity`s with a `Window` component.
- Make multiple windows very simple to set up. (just add a `Window` component to an entity and it should open)
## Solution
- Move all properties of window descriptor to ~components~ a component.
- Replace `WindowId` with `Entity`.
- ~Use change detection for components to update backend rather than events/commands. (The `CursorMoved`/`WindowResized`/... events are kept for user convenience.~
Check each field individually to see what we need to update, events are still kept for user convenience.
---
## Changelog
- `WindowDescriptor` renamed to `Window`.
- Width/height consolidated into a `WindowResolution` component.
- Requesting maximization/minimization is done on the [`Window::state`] field.
- `WindowId` is now `Entity`.
## Migration Guide
- Replace `WindowDescriptor` with `Window`.
- Change `width` and `height` fields in a `WindowResolution`, either by doing
```rust
WindowResolution::new(width, height) // Explicitly
// or using From<_> for tuples for convenience
(1920., 1080.).into()
```
- Replace any `WindowCommand` code to just modify the `Window`'s fields directly and creating/closing windows is now by spawning/despawning an entity with a `Window` component like so:
```rust
let window = commands.spawn(Window { ... }).id(); // open window
commands.entity(window).despawn(); // close window
```
## Unresolved
- ~How do we tell when a window is minimized by a user?~
~Currently using the `Resize(0, 0)` as an indicator of minimization.~
No longer attempting to tell given how finnicky this was across platforms, now the user can only request that a window be maximized/minimized.
## Future work
- Move `exit_on_close` functionality out from windowing and into app(?)
- https://github.com/bevyengine/bevy/issues/5621
- https://github.com/bevyengine/bevy/issues/7099
- https://github.com/bevyengine/bevy/issues/7098
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
See:
- https://github.com/bevyengine/bevy/issues/7067#issuecomment-1381982285
- (This does not fully close that issue in my opinion.)
- https://discord.com/channels/691052431525675048/1063454009769340989
## Solution
This merge request adds documentation:
1. Alert users to the fact that `App::run()` might never return and code placed after it might never be executed.
2. Makes `winit::WinitSettings::return_from_run` discoverable.
3. Better explains why `winit::WinitSettings::return_from_run` is discouraged and better links to up-stream docs. on that topic.
4. Adds notes to the `app/return_after_run.rs` example which otherwise promotes a feature that carries caveats.
Furthermore, w.r.t `winit::WinitSettings::return_from_run`:
- Broken links to `winit` docs are fixed.
- Links now point to BOTH `EventLoop::run()` and `EventLoopExtRunReturn::run_return()` which are the salient up-stream pages and make more sense, taken together.
- Collateral damage: "Supported platforms" heading; disambiguation of "run" → `App::run()`; links.
## Future Work
I deliberately structured the "`run()` might not return" section under `App::run()` to allow for alternative patterns (e.g. `AppExit` event, `WindowClosed` event) to be listed or mentioned, beneath it, in the future.
# Objective
- Set the cursor grab mode after the window is built, fix#7007, clean some conversion code.
## Solution
- Set the cursor grab mode after the window is built.
# Objective
Some settings were only applied in windowed mode.
Fix the issue in #6933
# Solution
Always apply the settings.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Bevy should be usable to create 'overlay' type apps, where the input is not captured by Bevy, but passed down/into a target app, or to allow passive displays/widgets etc.
## Solution
- the `winit:🪟:Window` already has a `set_cursor_hittest()` which basically does this for mouse input events, so I've exposed it (trying to copy the style laid out in the existing wrappings, and added a simple demo.
---
## Changelog
- Added `hittest` to `WindowAttributes`
- Added the `hittest`'s setters/getters
- Modified the `WindowBuilder`
- Modifed the `WindowDescriptor`'s `Default` impl.
- Added an example `cargo run --example fallthrough`
# Objective
Fix android touch events being flipped. Only removed test for android, don't have ios device to test with. Tested with emulator and physical device.
## Solution
Remove check, no longer needed with coordinate change in 0.9
# Objective
I needed a window which is always on top, to create a overlay app.
## Solution
expose the `always_on_top` property of winit in bevy's `WindowDescriptor` as a boolean flag
---
## Changelog
### Added
- add `WindowDescriptor.always_on_top` which configures a window to stay on top.
This reverts commit 8429b6d6ca as discussed in #6522.
I tested that the game_menu example works as it should.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Copy `send_event` and friends from `World` to `WorldCell`.
Clean up `bevy_winit` using `WorldCell::send_event`.
## Changelog
Added `send_event`, `send_event_default`, and `send_event_batch` to `WorldCell`.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
- Bevy main crashs on Safari mobile
- On Safari mobile, calling winit_window.set_cursor_grab(true) fails as the API is not implemented (as there is no cursor on Safari mobile, the api doesn't make sense there). I don't know about other mobile browsers
## Solution
- Do not call the api to release cursor grab on window creation, as the cursor is not grabbed anyway at this point
- This is #3617 which was lost in #6218
# Objective
- fix new clippy lints before they get stable and break CI
## Solution
- run `clippy --fix` to auto-fix machine-applicable lints
- silence `clippy::should_implement_trait` for `fn HandleId::default<T: Asset>`
## Changes
- always prefer `format!("{inline}")` over `format!("{}", not_inline)`
- prefer `Box::default` (or `Box::<T>::default` if necessary) over `Box::new(T::default())`
# Objective
- Update `wgpu` to 0.14.0, `naga` to `0.10.0`, `winit` to 0.27.4, `raw-window-handle` to 0.5.0, `ndk` to 0.7.
## Solution
---
## Changelog
### Changed
- Changed `RawWindowHandleWrapper` to `RawHandleWrapper` which wraps both `RawWindowHandle` and `RawDisplayHandle`, which satisfies the `impl HasRawWindowHandle and HasRawDisplayHandle` that `wgpu` 0.14.0 requires.
- Changed `bevy_window::WindowDescriptor`'s `cursor_locked` to `cursor_grab_mode`, change its type from `bool` to `bevy_window::CursorGrabMode`.
## Migration Guide
- Adjust usage of `bevy_window::WindowDescriptor`'s `cursor_locked` to `cursor_grab_mode`, and adjust its type from `bool` to `bevy_window::CursorGrabMode`.
# Objective
- Trying to make it possible to do write tests that don't require a raw window handle.
- Fixes https://github.com/bevyengine/bevy/issues/6106.
## Solution
- Make the interface and type changes. Avoid accessing `None`.
---
## Changelog
- Converted `raw_window_handle` field in both `Window` and `ExtractedWindow` to `Option<RawWindowHandleWrapper>`.
- Revised accessor function `Window::raw_window_handle()` to return `Option<RawWindowHandleWrapper>`.
- Skip conditions in loops that would require a raw window handle (to create a `Surface`, for example).
## Migration Guide
`Window::raw_window_handle()` now returns `Option<RawWindowHandleWrapper>`.
Co-authored-by: targrub <62773321+targrub@users.noreply.github.com>
# Objective
Fixes#5882
## Solution
Per https://github.com/rust-windowing/winit/issues/1705, the root cause is "UIWindow should be created inside UIApplicationMain". Currently, there are two places to create UIWindow, one is Plugin's build function, which is not inside UIApplicationMain. Just comment it out, and it works.
# Objective
Support monitor selection for all window modes.
Fixes#5875.
## Changelog
* Moved `MonitorSelection` out of `WindowPosition::Centered`, into `WindowDescriptor`.
* `WindowPosition::At` is now relative to the monitor instead of being in 'desktop space'.
* Renamed `MonitorSelection::Number` to `MonitorSelection::Index` for clarity.
* Added `WindowMode` to the prelude.
* `Window::set_position` is now relative to a monitor and takes a `MonitorSelection` as argument.
## Migration Guide
`MonitorSelection` was moved out of `WindowPosition::Centered`, into `WindowDescriptor`.
`MonitorSelection::Number` was renamed to `MonitorSelection::Index`.
```rust
// Before
.insert_resource(WindowDescriptor {
position: WindowPosition::Centered(MonitorSelection::Number(1)),
..default()
})
// After
.insert_resource(WindowDescriptor {
monitor: MonitorSelection::Index(1),
position: WindowPosition::Centered,
..default()
})
```
`Window::set_position` now takes a `MonitorSelection` as argument.
```rust
window.set_position(MonitorSelection::Current, position);
```
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
https://github.com/bevyengine/bevy/pull/503 added these.
I don't know what problem it solved, the PR doesn't say and the code didn't make it obvious to me.
## Solution
AFAIK removing unsafe `Send`/`Sync` impls can't introduce unsoundness.
Yeet.
## Migration Guide
Why tho.
Co-authored-by: devil-ira <justthecooldude@gmail.com>
# Objective
Fixes#5581
## Solution
`Window::scale_factor` already has logic for selecting the overridden or actual scale factor, so use it.
I tested this with the displays I have access to, but more testing would be nice. This seems like a pretty straightforward bug/fix though.
## Changelog
### Fixed
Fixed window centering on high-dpi displays.
*This PR description is an edited copy of #5007, written by @alice-i-cecile.*
# Objective
Follow-up to https://github.com/bevyengine/bevy/pull/2254. The `Resource` trait currently has a blanket implementation for all types that meet its bounds.
While ergonomic, this results in several drawbacks:
* it is possible to make confusing, silent mistakes such as inserting a function pointer (Foo) rather than a value (Foo::Bar) as a resource
* it is challenging to discover if a type is intended to be used as a resource
* we cannot later add customization options (see the [RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/27-derive-component.md) for the equivalent choice for Component).
* dependencies can use the same Rust type as a resource in invisibly conflicting ways
* raw Rust types used as resources cannot preserve privacy appropriately, as anyone able to access that type can read and write to internal values
* we cannot capture a definitive list of possible resources to display to users in an editor
## Notes to reviewers
* Review this commit-by-commit; there's effectively no back-tracking and there's a lot of churn in some of these commits.
*ira: My commits are not as well organized :')*
* I've relaxed the bound on Local to Send + Sync + 'static: I don't think these concerns apply there, so this can keep things simple. Storing e.g. a u32 in a Local is fine, because there's a variable name attached explaining what it does.
* I think this is a bad place for the Resource trait to live, but I've left it in place to make reviewing easier. IMO that's best tackled with https://github.com/bevyengine/bevy/issues/4981.
## Changelog
`Resource` is no longer automatically implemented for all matching types. Instead, use the new `#[derive(Resource)]` macro.
## Migration Guide
Add `#[derive(Resource)]` to all types you are using as a resource.
If you are using a third party type as a resource, wrap it in a tuple struct to bypass orphan rules. Consider deriving `Deref` and `DerefMut` to improve ergonomics.
`ClearColor` no longer implements `Component`. Using `ClearColor` as a component in 0.8 did nothing.
Use the `ClearColorConfig` in the `Camera3d` and `Camera2d` components instead.
Co-authored-by: Alice <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: devil-ira <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Resolves#5004. As suggested in the original issue, change tuple types to their corresponding vector type.
## migration guide
Changed the following fields
- `WindowCommand::SetWindowMode.resolution` from `(u32, u32)` to `UVec2`
- `WindowCommand::SetResolution.logical_resolution` from `(f32, f32)` to `Vec2`
Co-authored-by: Daniel Liu <mr.picklepinosaur@gmail.com>
# Objective
- Fixes#4993
## Solution
- ~~Add `centered` property to `WindowDescriptor`~~
- Add `WindowPosition` enum
- `WindowDescriptor.position` is now `WindowPosition` instead of `Option<Vec2>`
- Add `center_window` function to `Window`
## Migration Guide
- If using `WindowDescriptor`, replace `position: None` with `position: WindowPosition::Default` and `position: Some(vec2)` with `WindowPosition::At(vec2)`.
I'm not sure if this is the best approach, so feel free to give any feedback.
Also I'm not sure how `Option`s should be handled in `bevy_winit/src/lib.rs:161`.
Also, on window creation we can't (or at least I couldn't) get `outer_size`, so this doesn't include decorations in calculations.
# Objective
- Make Bevy work on android
## Solution
- Update android metadata and add a few more
- Set the target sdk to 31 as it will soon (in august) be the minimum sdk level for play store
- Remove the custom code to create an activity and use ndk-glue macro instead
- Delay window creation event on android
- Set the example with compatibility settings for wgpu. Those are needed for Bevy to work on my 2019 android tablet
- Add a few details on how to debug in case of failures
- Fix running the example on emulator. This was failing because of the name of the example
Bevy still doesn't work on android with this, audio features need to be disabled because of an ndk-glue version mismatch: rodio depends on 0.6.2, winit on 0.5.2. You can test with:
```
cargo apk run --release --example android_example --no-default-features --features "bevy_winit,render"
```
# Objective
Fix#4958
There was 4 issues:
- this is not true in WASM and on macOS: f28b921209/examples/3d/split_screen.rs (L90)
- ~~I made sure the system was running at least once~~
- I'm sending the event on window creation
- in webgl, setting a viewport has impacts on other render passes
- only in webgl and when there is a custom viewport, I added a render pass without a custom viewport
- shaderdef NO_ARRAY_TEXTURES_SUPPORT was not used by the 2d pipeline
- webgl feature was used but not declared in bevy_sprite, I added it to the Cargo.toml
- shaderdef NO_STORAGE_BUFFERS_SUPPORT was not used by the 2d pipeline
- I added it based on the BufferBindingType
The last commit changes the two last fixes to add the shaderdefs in the shader cache directly instead of needing to do it in each pipeline
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Currently Bevy's web canvases are "fixed size". They are manually set to specific dimensions. This might be fine for some games and website layouts, but for sites with flexible layouts, or games that want to "fill" the browser window, Bevy doesn't provide the tools needed to make this easy out of the box.
There are third party plugins like [bevy-web-resizer](https://github.com/frewsxcv/bevy-web-resizer/) that listen for window resizes, take the new dimensions, and resize the winit window accordingly. However this only covers a subset of cases and this is common enough functionality that it should be baked into Bevy.
A significant motivating use case here is the [Bevy WASM Examples page](https://bevyengine.org/examples/). This scales the canvas to fit smaller windows (such as mobile). But this approach both breaks winit's mouse events and removes pixel-perfect rendering (which means we might be rendering too many or too few pixels). https://github.com/bevyengine/bevy-website/issues/371
In an ideal world, winit would support this behavior out of the box. But unfortunately that seems blocked for now: https://github.com/rust-windowing/winit/pull/2074. And it builds on the ResizeObserver api, which isn't supported in all browsers yet (and is only supported in very new versions of the popular browsers).
While we wait for a complete winit solution, I've added a `fit_canvas_to_parent` option to WindowDescriptor / Window, which when enabled will listen for window resizes and resize the Bevy canvas/window to fit its parent element. This enables users to scale bevy canvases using arbitrary CSS, by "inheriting" their parents' size. Note that the wrapper element _is_ required because winit overrides the canvas sizing with absolute values on each resize.
There is one limitation worth calling out here: while the majority of canvas resizes will be triggered by window resizes, modifying element layout at runtime (css animations, javascript-driven element changes, dev-tool-injected changes, etc) will not be detected here. I'm not aware of a good / efficient event-driven way to do this outside of the ResizeObserver api. In practice, window-resize-driven canvas resizing should cover the majority of use cases. Users that want to actively poll for element resizes can just do that (or we can build another feature and let people choose based on their specific needs).
I also took the chance to make a couple of minor tweaks:
* Made the `canvas` window setting available on all platforms. Users shouldn't need to deal with cargo feature selection to support web scenarios. We can just ignore the value on non-web platforms. I added documentation that explains this.
* Removed the redundant "initial create windows" handler. With the addition of the code in this pr, the code duplication was untenable.
This enables a number of patterns:
## Easy "fullscreen window" mode for the default canvas
The "parent element" defaults to the `<body>` element.
```rust
app
.insert_resource(WindowDescriptor {
fit_canvas_to_parent: true,
..default()
})
```
And CSS:
```css
html, body {
margin: 0;
height: 100%;
}
```
## Fit custom canvas to "wrapper" parent element
```rust
app
.insert_resource(WindowDescriptor {
fit_canvas_to_parent: true,
canvas: Some("#bevy".to_string()),
..default()
})
```
And the HTML:
```html
<div style="width: 50%; height: 100%">
<canvas id="bevy"></canvas>
</div>
```
# Objective
Fixes#3180, builds from https://github.com/bevyengine/bevy/pull/2898
## Solution
Support requesting a window to be closed and closing a window in `bevy_window`, and handle this in `bevy_winit`.
This is a stopgap until we move to windows as entites, which I'm sure I'll get around to eventually.
## Changelog
### Added
- `Window::close` to allow closing windows.
- `WindowClosed` to allow reacting to windows being closed.
### Changed
Replaced `bevy::system::exit_on_esc_system` with `bevy:🪟:close_on_esc`.
## Fixed
The app no longer exits when any window is closed. This difference is only observable when there are multiple windows.
## Migration Guide
`bevy::input::system::exit_on_esc_system` has been removed. Use `bevy:🪟:close_on_esc` instead.
`CloseWindow` has been removed. Use `Window::close` instead.
The `Close` variant has been added to `WindowCommand`. Handle this by closing the relevant window.
# Objective
- Part of the splitting process of #3692.
## Solution
- Rename `ElementState` to `ButtonState`
## Reasons
- The old name was too generic.
- If something can be pressed it is automatically button-like (thanks to @alice-i-cecile for bringing it up in #3692).
- The reason it is called `ElementState` is because that's how `winit` calls it.
- It is used to define if a keyboard or mouse **button** is pressed or not.
- Discussion in #3692.
## Changelog
### Changed
- The `ElementState` type received a rename and is now called `ButtonState`.
## Migration Guide
- The `ElementState` type received a rename and is now called `ButtonState`. To migrate you just have to change every occurrence of `ElementState` to `ButtonState`.
Co-authored-by: KDecay <KDecayMusic@protonmail.com>
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/2096
## Solution
- This PR enables the drag-and-drop feature for winit on windows again, as the collision issue between cpal and winit has been fixed in https://github.com/RustAudio/cpal/pull/597. I confirmed the drag and drop example working on windows 10 with this change.
- ~~It also bumps the rodio version, though this is not strictly necessary.~~
# Objective
- Improve documentation.
- Provide helper functions for common uses of `Windows` relating to getting the primary `Window`.
- Reduce repeated `Window` code.
# Solution
- Adds infallible `primary()` and `primary_mut()` functions with standard error text. This replaces the commonly used `get_primary().unwrap()` seen throughout bevy which has inconsistent or nonexistent error messages.
- Adds `scale_factor(WindowId)` to replace repeated code blocks throughout.
# Considerations
- The added functions can panic if the primary window does not exist.
- It is very uncommon for the primary window to not exist, as seen by the regular use of `get_primary().unwrap()`. Most users will have a single window and will need to reference the primary window in their code multiple times.
- The panic provides a consistent error message to make this class of error easy to spot from the panic text.
- This follows the established standard of short names for infallible-but-unlikely-to-panic functions in bevy.
- Removes line noise for common usage of `Windows`.
# Objective
- Reduce power usage for games when not focused.
- Reduce power usage to ~0 when a desktop application is minimized (opt-in).
- Reduce power usage when focused, only updating on a `winit` event, or the user sends a redraw request. (opt-in)
https://user-images.githubusercontent.com/2632925/156904387-ec47d7de-7f06-4c6f-8aaf-1e952c1153a2.mp4
Note resource usage in the Task Manager in the above video.
## Solution
- Added a type `UpdateMode` that allows users to specify how the winit event loop is updated, without exposing winit types.
- Added two fields to `WinitConfig`, both with the `UpdateMode` type. One configures how the application updates when focused, and the other configures how the application behaves when it is not focused. Users can modify this resource manually to set the type of event loop control flow they want.
- For convenience, two functions were added to `WinitConfig`, that provide reasonable presets: `game()` (default) and `desktop_app()`.
- The `game()` preset, which is used by default, is unchanged from current behavior with one exception: when the app is out of focus the app updates at a minimum of 10fps, or every time a winit event is received. This has a huge positive impact on power use and responsiveness on my machine, which will otherwise continue running the app at many hundreds of fps when out of focus or minimized.
- The `desktop_app()` preset is fully reactive, only updating when user input (winit event) is supplied or a `RedrawRequest` event is sent. When the app is out of focus, it only updates on `Window` events - i.e. any winit event that directly interacts with the window. What this means in practice is that the app uses *zero* resources when minimized or not interacted with, but still updates fluidly when the app is out of focus and the user mouses over the application.
- Added a `RedrawRequest` event so users can force an update even if there are no events. This is useful in an application when you want to, say, run an animation even when the user isn't providing input.
- Added an example `low_power` to demonstrate these changes
## Usage
Configuring the event loop:
```rs
use bevy::winit::{WinitConfig};
// ...
.insert_resource(WinitConfig::desktop_app()) // preset
// or
.insert_resource(WinitConfig::game()) // preset
// or
.insert_resource(WinitConfig{ .. }) // manual
```
Requesting a redraw:
```rs
use bevy:🪟:RequestRedraw;
// ...
fn request_redraw(mut event: EventWriter<RequestRedraw>) {
event.send(RequestRedraw);
}
```
## Other details
- Because we have a single event loop for multiple windows, every time I've mentioned "focused" above, I more precisely mean, "if at least one bevy window is focused".
- Due to a platform bug in winit (https://github.com/rust-windowing/winit/issues/1619), we can't simply use `Window::request_redraw()`. As a workaround, this PR will temporarily set the window mode to `Poll` when a redraw is requested. This is then reset to the user's `WinitConfig` setting on the next frame.
# Objective
- In the large majority of cases, users were calling `.unwrap()` immediately after `.get_resource`.
- Attempting to add more helpful error messages here resulted in endless manual boilerplate (see #3899 and the linked PRs).
## Solution
- Add an infallible variant named `.resource` and so on.
- Use these infallible variants over `.get_resource().unwrap()` across the code base.
## Notes
I did not provide equivalent methods on `WorldCell`, in favor of removing it entirely in #3939.
## Migration Guide
Infallible variants of `.get_resource` have been added that implicitly panic, rather than needing to be unwrapped.
Replace `world.get_resource::<Foo>().unwrap()` with `world.resource::<Foo>()`.
## Impact
- `.unwrap` search results before: 1084
- `.unwrap` search results after: 942
- internal `unwrap_or_else` calls added: 4
- trivial unwrap calls removed from tests and code: 146
- uses of the new `try_get_resource` API: 11
- percentage of the time the unwrapping API was used internally: 93%
# Objective
- Fixes#4010, as well as any similar issues in this class.
- Winit functions used outside of the main thread can cause the application to unexpectedly hang.
## Solution
- Make the `WinitWindows` resource `!Send`.
- This ensures that any systems that use `WinitWindows` must either be exclusive (run on the main thread), or the resource is explicitly marked with the `NonSend` parameter in user systems.
What is says on the tin.
This has got more to do with making `clippy` slightly more *quiet* than it does with changing anything that might greatly impact readability or performance.
that said, deriving `Default` for a couple of structs is a nice easy win
# Objective
- Fixes#3078
- Fixes#1397
## Solution
- Implement Commands::init_resource.
- Also implement for World, for consistency and to simplify internal structure.
- While we're here, clean up some of the docs for Command and World resource modification.
# Objective
When I use the latest winit with bevy main, I got this error.
```
error[E0308]: mismatched types
--> /Users/ryo/.cargo/git/checkouts/bevy-f7ffde730c324c74/b13f238/crates/bevy_winit/src/lib.rs:191:5
|
191 | event_loop.run_return(event_handler)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected `()`, found `i32`
|
help: consider using a semicolon here
|
191 | event_loop.run_return(event_handler);
| +
help: try adding a return type
|
187 | -> i32 where
| ++++++
```
In [this commit](a52f755ce8), the signature of `run_return` was changed in winit.
## Solution
This tiny PR does not add support for exit code, but makes compilation successful.
# Objective
Enable the user to specify any presentation modes (including `Mailbox`).
Fixes#3807
## Solution
I've added a new `PresentMode` enum in `bevy_window` that mirrors the `wgpu` enum 1:1. Alternatively, I could add a new dependency on `wgpu-types` if that would be preferred.
# Objective
- On Safari mobile, calling `winit_window.set_cursor_grab(true)` fails as the API is not implemented (as there is no cursor on Safari mobile, the api doesn't make sense there). I don't know about other mobile browsers
```
[Error] Unhandled Promise Rejection: TypeError: getObject(arg0).exitPointerLock is not a function. (In 'getObject(arg0).exitPointerLock()', 'getObject(arg0).exitPointerLock' is undefined)
(anonymous function) (rect.js:1089)
wasm-stub
<?>.wasm-function[web_sys::features::gen_Document::Document::exit_pointer_lock::h20ffc49be163fc45]
<?>.wasm-function[winit::platform_impl::platform::backend::canvas::Canvas::set_cursor_grab::h6a9472cf55263e98]
<?>.wasm-function[bevy_winit::winit_windows::WinitWindows::create_window::h9db5b3cbb24347c5]
<?>.wasm-function[<bevy_winit::WinitPlugin as bevy_app::plugin::Plugin>::build::ha4a7c046b80c4280]
<?>.wasm-function[bevy_app::plugin_group::PluginGroupBuilder::finish::h0e5bc78f71c37b2f]
<?>.wasm-function[rect::main::h899852fd17f2d489]
<?>.wasm-function[std::sys_common::backtrace::__rust_begin_short_backtrace::hfe38f282e8dda96b]
<?>.wasm-function[std::rt::lang_start::{{closure}}::hc2f3b555ffc58618]
<?>.wasm-function[std::rt::lang_start_internal::ha901ae30d88554f2]
<?>.wasm-function[main]
<?>.wasm-function[]
wasm-stub
21261
(anonymous function) (rect.js:1664)
asyncFunctionResume
(anonymous function)
promiseReactionJobWithoutPromise
promiseReactionJob
```
## Solution
- Do not call the api to release cursor grab on window creation, as the cursor is not grabbed anyway at this point
# Objective
The window's cursor should be settable without having to implement a custom cursor icon solution. This will especially be helpful when creating user-interfaces that might like to use the cursor to denote some meaning (e.g., _clickable_, _resizable_, etc.).
## Solution
Added a `CursorIcon` enum that maps one-to-one to winit's `CursorIcon` enum, as well as a method to set/get it for the given `Window`.
# Objective
- there are a few new versions for `ron`, `winit`, `ndk`, `raw-window-handle`
- `cargo-deny` is failing due to new security issues / duplicated dependencies
## Solution
- Update our dependencies
- Note all new security issues, with which of Bevy direct dependency it comes from
- Update duplicate crate list, with which of Bevy direct dependency it comes from
`notify` is not updated here as it's in #2993
Applogies, had to recreate this pr because of branching issue.
Old PR: https://github.com/bevyengine/bevy/pull/3033
# Objective
Fixes#3032
Allowing a user to create a transparent window
## Solution
I've allowed the transparent bool to be passed to the winit window builder
This pull request aims to solve the issue of a lack of documentation in the enum WindowMode
# Objective
- Fixes#3136
## Solution
- Added a few lines of documentation that should document what the enum does better
# Objective
Set initial position of the window, so I can start it at the left side of the view automatically, used with `cargo watch`
## Solution
add window position to WindowDescriptor
# Objective
Make possible to use wgpu gles backend on in the browser (wasm32 + WebGL2).
## Solution
It is built on top of old @cart patch initializing windows before wgpu. Also:
- initializes wgpu with `Backends::GL` and proper `wgpu::Limits` on wasm32
- changes default texture format to `wgpu::TextureFormat::Rgba8UnormSrgb`
Co-authored-by: Mariusz Kryński <mrk@sed.pl>
Objective
During work on #3009 I've found that not all jobs use actions-rs, and therefore, an previous version of Rust is used for them. So while compilation and other stuff can pass, checking markup and Android build may fail with compilation errors.
Solution
This PR adds `action-rs` for any job running cargo, and updates the edition to 2021.
# Objective
- Fixes#2501
- Builds up on #2639 taking https://github.com/bevyengine/bevy/pull/2639#issuecomment-898701047 into account
## Solution
- keep the physical cursor position in `Window`, and expose it.
- still convert to logical position in event, and when getting `cursor_position`
Co-authored-by: Ahmed Charles <acharles@outlook.com>
# Objective
- Fixes#2751
## Solution
- Avoid changing the window size if there is a scale factor override
- Can be tested with the `scale_factor_override` example - use <kbd>⏎</kbd> to active overriding the scale factor
This is extracted out of eb8f973646476b4a4926ba644a77e2b3a5772159 and includes some additional changes to remove all references to AppBuilder and fix examples that still used App::build() instead of App::new(). In addition I didn't extract the sub app feature as it isn't ready yet.
You can use `git diff --diff-filter=M eb8f973646476b4a4926ba644a77e2b3a5772159` to find all differences in this PR. The `--diff-filtered=M` filters all files added in the original commit but not in this commit away.
Co-Authored-By: Carter Anderson <mcanders1@gmail.com>
This relicenses Bevy under the dual MIT or Apache-2.0 license. For rationale, see #2373.
* Changes the LICENSE file to describe the dual license. Moved the MIT license to docs/LICENSE-MIT. Added the Apache-2.0 license to docs/LICENSE-APACHE. I opted for this approach over dumping both license files at the root (the more common approach) for a number of reasons:
* Github links to the "first" license file (LICENSE-APACHE) in its license links (you can see this in the wgpu and rust-analyzer repos). People clicking these links might erroneously think that the apache license is the only option. Rust and Amethyst both use COPYRIGHT or COPYING files to solve this problem, but this creates more file noise (if you do everything at the root) and the naming feels way less intuitive.
* People have a reflex to look for a LICENSE file. By providing a single license file at the root, we make it easy for them to understand our licensing approach.
* I like keeping the root clean and noise free
* There is precedent for putting the apache and mit license text in sub folders (amethyst)
* Removed the `Copyright (c) 2020 Carter Anderson` copyright notice from the MIT license. I don't care about this attribution, it might make license compliance more difficult in some cases, and it didn't properly attribute other contributors. We shoudn't replace it with something like "Copyright (c) 2021 Bevy Contributors" because "Bevy Contributors" is not a legal entity. Instead, we just won't include the copyright line (which has precedent ... Rust also uses this approach).
* Updates crates to use the new "MIT OR Apache-2.0" license value
* Removes the old legion-transform license file from bevy_transform. bevy_transform has been its own, fully custom implementation for a long time and that license no longer applies.
* Added a License section to the main readme
* Updated our Bevy Plugin licensing guidelines.
As a follow-up we should update the website to properly describe the new license.
Closes#2373
# Objective
This fixes a crash caused by iOS preventing GPU access when not focused: #2296
## Solution
This skips `app.update()` in `winit_runner` when `winit` sends the `Suspended` event, until `Resumed`.
I've tested that this works for me on my iOS app.
# Objective
Reduce compilation time
# Solution
Remove unused dependencies. While this PR doesn't remove any crates from `Cargo.lock`, it may unlock more build parallelism.
* Adds labels and orderings to systems that need them (uses the new many-to-many labels for InputSystem)
* Removes the Event, PreEvent, Scene, and Ui stages in favor of First, PreUpdate, and PostUpdate (there is more collapsing potential, such as the Asset stages and _maybe_ removing First, but those have more nuance so they should be handled separately)
* Ambiguity detection now prints component conflicts
* Removed broken change filters from flex calculation (which implicitly relied on the z-update system always modifying translation.z). This will require more work to make it behave as expected so i just removed it (and it was already doing this work every frame).
# Bevy ECS V2
This is a rewrite of Bevy ECS (basically everything but the new executor/schedule, which are already awesome). The overall goal was to improve the performance and versatility of Bevy ECS. Here is a quick bulleted list of changes before we dive into the details:
* Complete World rewrite
* Multiple component storage types:
* Tables: fast cache friendly iteration, slower add/removes (previously called Archetypes)
* Sparse Sets: fast add/remove, slower iteration
* Stateful Queries (caches query results for faster iteration. fragmented iteration is _fast_ now)
* Stateful System Params (caches expensive operations. inspired by @DJMcNab's work in #1364)
* Configurable System Params (users can set configuration when they construct their systems. once again inspired by @DJMcNab's work)
* Archetypes are now "just metadata", component storage is separate
* Archetype Graph (for faster archetype changes)
* Component Metadata
* Configure component storage type
* Retrieve information about component size/type/name/layout/send-ness/etc
* Components are uniquely identified by a densely packed ComponentId
* TypeIds are now totally optional (which should make implementing scripting easier)
* Super fast "for_each" query iterators
* Merged Resources into World. Resources are now just a special type of component
* EntityRef/EntityMut builder apis (more efficient and more ergonomic)
* Fast bitset-backed `Access<T>` replaces old hashmap-based approach everywhere
* Query conflicts are determined by component access instead of archetype component access (to avoid random failures at runtime)
* With/Without are still taken into account for conflicts, so this should still be comfy to use
* Much simpler `IntoSystem` impl
* Significantly reduced the amount of hashing throughout the ecs in favor of Sparse Sets (indexed by densely packed ArchetypeId, ComponentId, BundleId, and TableId)
* Safety Improvements
* Entity reservation uses a normal world reference instead of unsafe transmute
* QuerySets no longer transmute lifetimes
* Made traits "unsafe" where relevant
* More thorough safety docs
* WorldCell
* Exposes safe mutable access to multiple resources at a time in a World
* Replaced "catch all" `System::update_archetypes(world: &World)` with `System::new_archetype(archetype: &Archetype)`
* Simpler Bundle implementation
* Replaced slow "remove_bundle_one_by_one" used as fallback for Commands::remove_bundle with fast "remove_bundle_intersection"
* Removed `Mut<T>` query impl. it is better to only support one way: `&mut T`
* Removed with() from `Flags<T>` in favor of `Option<Flags<T>>`, which allows querying for flags to be "filtered" by default
* Components now have is_send property (currently only resources support non-send)
* More granular module organization
* New `RemovedComponents<T>` SystemParam that replaces `query.removed::<T>()`
* `world.resource_scope()` for mutable access to resources and world at the same time
* WorldQuery and QueryFilter traits unified. FilterFetch trait added to enable "short circuit" filtering. Auto impled for cases that don't need it
* Significantly slimmed down SystemState in favor of individual SystemParam state
* System Commands changed from `commands: &mut Commands` back to `mut commands: Commands` (to allow Commands to have a World reference)
Fixes#1320
## `World` Rewrite
This is a from-scratch rewrite of `World` that fills the niche that `hecs` used to. Yes, this means Bevy ECS is no longer a "fork" of hecs. We're going out our own!
(the only shared code between the projects is the entity id allocator, which is already basically ideal)
A huge shout out to @SanderMertens (author of [flecs](https://github.com/SanderMertens/flecs)) for sharing some great ideas with me (specifically hybrid ecs storage and archetype graphs). He also helped advise on a number of implementation details.
## Component Storage (The Problem)
Two ECS storage paradigms have gained a lot of traction over the years:
* **Archetypal ECS**:
* Stores components in "tables" with static schemas. Each "column" stores components of a given type. Each "row" is an entity.
* Each "archetype" has its own table. Adding/removing an entity's component changes the archetype.
* Enables super-fast Query iteration due to its cache-friendly data layout
* Comes at the cost of more expensive add/remove operations for an Entity's components, because all components need to be copied to the new archetype's "table"
* **Sparse Set ECS**:
* Stores components of the same type in densely packed arrays, which are sparsely indexed by densely packed unsigned integers (Entity ids)
* Query iteration is slower than Archetypal ECS because each entity's component could be at any position in the sparse set. This "random access" pattern isn't cache friendly. Additionally, there is an extra layer of indirection because you must first map the entity id to an index in the component array.
* Adding/removing components is a cheap, constant time operation
Bevy ECS V1, hecs, legion, flec, and Unity DOTS are all "archetypal ecs-es". I personally think "archetypal" storage is a good default for game engines. An entity's archetype doesn't need to change frequently in general, and it creates "fast by default" query iteration (which is a much more common operation). It is also "self optimizing". Users don't need to think about optimizing component layouts for iteration performance. It "just works" without any extra boilerplate.
Shipyard and EnTT are "sparse set ecs-es". They employ "packing" as a way to work around the "suboptimal by default" iteration performance for specific sets of components. This helps, but I didn't think this was a good choice for a general purpose engine like Bevy because:
1. "packs" conflict with each other. If bevy decides to internally pack the Transform and GlobalTransform components, users are then blocked if they want to pack some custom component with Transform.
2. users need to take manual action to optimize
Developers selecting an ECS framework are stuck with a hard choice. Select an "archetypal" framework with "fast iteration everywhere" but without the ability to cheaply add/remove components, or select a "sparse set" framework to cheaply add/remove components but with slower iteration performance.
## Hybrid Component Storage (The Solution)
In Bevy ECS V2, we get to have our cake and eat it too. It now has _both_ of the component storage types above (and more can be added later if needed):
* **Tables** (aka "archetypal" storage)
* The default storage. If you don't configure anything, this is what you get
* Fast iteration by default
* Slower add/remove operations
* **Sparse Sets**
* Opt-in
* Slower iteration
* Faster add/remove operations
These storage types complement each other perfectly. By default Query iteration is fast. If developers know that they want to add/remove a component at high frequencies, they can set the storage to "sparse set":
```rust
world.register_component(
ComponentDescriptor:🆕:<MyComponent>(StorageType::SparseSet)
).unwrap();
```
## Archetypes
Archetypes are now "just metadata" ... they no longer store components directly. They do store:
* The `ComponentId`s of each of the Archetype's components (and that component's storage type)
* Archetypes are uniquely defined by their component layouts
* For example: entities with "table" components `[A, B, C]` _and_ "sparse set" components `[D, E]` will always be in the same archetype.
* The `TableId` associated with the archetype
* For now each archetype has exactly one table (which can have no components),
* There is a 1->Many relationship from Tables->Archetypes. A given table could have any number of archetype components stored in it:
* Ex: an entity with "table storage" components `[A, B, C]` and "sparse set" components `[D, E]` will share the same `[A, B, C]` table as an entity with `[A, B, C]` table component and `[F]` sparse set components.
* This 1->Many relationship is how we preserve fast "cache friendly" iteration performance when possible (more on this later)
* A list of entities that are in the archetype and the row id of the table they are in
* ArchetypeComponentIds
* unique densely packed identifiers for (ArchetypeId, ComponentId) pairs
* used by the schedule executor for cheap system access control
* "Archetype Graph Edges" (see the next section)
## The "Archetype Graph"
Archetype changes in Bevy (and a number of other archetypal ecs-es) have historically been expensive to compute. First, you need to allocate a new vector of the entity's current component ids, add or remove components based on the operation performed, sort it (to ensure it is order-independent), then hash it to find the archetype (if it exists). And thats all before we get to the _already_ expensive full copy of all components to the new table storage.
The solution is to build a "graph" of archetypes to cache these results. @SanderMertens first exposed me to the idea (and he got it from @gjroelofs, who came up with it). They propose adding directed edges between archetypes for add/remove component operations. If `ComponentId`s are densely packed, you can use sparse sets to cheaply jump between archetypes.
Bevy takes this one step further by using add/remove `Bundle` edges instead of `Component` edges. Bevy encourages the use of `Bundles` to group add/remove operations. This is largely for "clearer game logic" reasons, but it also helps cut down on the number of archetype changes required. `Bundles` now also have densely-packed `BundleId`s. This allows us to use a _single_ edge for each bundle operation (rather than needing to traverse N edges ... one for each component). Single component operations are also bundles, so this is strictly an improvement over a "component only" graph.
As a result, an operation that used to be _heavy_ (both for allocations and compute) is now two dirt-cheap array lookups and zero allocations.
## Stateful Queries
World queries are now stateful. This allows us to:
1. Cache archetype (and table) matches
* This resolves another issue with (naive) archetypal ECS: query performance getting worse as the number of archetypes goes up (and fragmentation occurs).
2. Cache Fetch and Filter state
* The expensive parts of fetch/filter operations (such as hashing the TypeId to find the ComponentId) now only happen once when the Query is first constructed
3. Incrementally build up state
* When new archetypes are added, we only process the new archetypes (no need to rebuild state for old archetypes)
As a result, the direct `World` query api now looks like this:
```rust
let mut query = world.query::<(&A, &mut B)>();
for (a, mut b) in query.iter_mut(&mut world) {
}
```
Requiring `World` to generate stateful queries (rather than letting the `QueryState` type be constructed separately) allows us to ensure that _all_ queries are properly initialized (and the relevant world state, such as ComponentIds). This enables QueryState to remove branches from its operations that check for initialization status (and also enables query.iter() to take an immutable world reference because it doesn't need to initialize anything in world).
However in systems, this is a non-breaking change. State management is done internally by the relevant SystemParam.
## Stateful SystemParams
Like Queries, `SystemParams` now also cache state. For example, `Query` system params store the "stateful query" state mentioned above. Commands store their internal `CommandQueue`. This means you can now safely use as many separate `Commands` parameters in your system as you want. `Local<T>` system params store their `T` value in their state (instead of in Resources).
SystemParam state also enabled a significant slim-down of SystemState. It is much nicer to look at now.
Per-SystemParam state naturally insulates us from an "aliased mut" class of errors we have hit in the past (ex: using multiple `Commands` system params).
(credit goes to @DJMcNab for the initial idea and draft pr here #1364)
## Configurable SystemParams
@DJMcNab also had the great idea to make SystemParams configurable. This allows users to provide some initial configuration / values for system parameters (when possible). Most SystemParams have no config (the config type is `()`), but the `Local<T>` param now supports user-provided parameters:
```rust
fn foo(value: Local<usize>) {
}
app.add_system(foo.system().config(|c| c.0 = Some(10)));
```
## Uber Fast "for_each" Query Iterators
Developers now have the choice to use a fast "for_each" iterator, which yields ~1.5-3x iteration speed improvements for "fragmented iteration", and minor ~1.2x iteration speed improvements for unfragmented iteration.
```rust
fn system(query: Query<(&A, &mut B)>) {
// you now have the option to do this for a speed boost
query.for_each_mut(|(a, mut b)| {
});
// however normal iterators are still available
for (a, mut b) in query.iter_mut() {
}
}
```
I think in most cases we should continue to encourage "normal" iterators as they are more flexible and more "rust idiomatic". But when that extra "oomf" is needed, it makes sense to use `for_each`.
We should also consider using `for_each` for internal bevy systems to give our users a nice speed boost (but that should be a separate pr).
## Component Metadata
`World` now has a `Components` collection, which is accessible via `world.components()`. This stores mappings from `ComponentId` to `ComponentInfo`, as well as `TypeId` to `ComponentId` mappings (where relevant). `ComponentInfo` stores information about the component, such as ComponentId, TypeId, memory layout, send-ness (currently limited to resources), and storage type.
## Significantly Cheaper `Access<T>`
We used to use `TypeAccess<TypeId>` to manage read/write component/archetype-component access. This was expensive because TypeIds must be hashed and compared individually. The parallel executor got around this by "condensing" type ids into bitset-backed access types. This worked, but it had to be re-generated from the `TypeAccess<TypeId>`sources every time archetypes changed.
This pr removes TypeAccess in favor of faster bitset access everywhere. We can do this thanks to the move to densely packed `ComponentId`s and `ArchetypeComponentId`s.
## Merged Resources into World
Resources had a lot of redundant functionality with Components. They stored typed data, they had access control, they had unique ids, they were queryable via SystemParams, etc. In fact the _only_ major difference between them was that they were unique (and didn't correlate to an entity).
Separate resources also had the downside of requiring a separate set of access controls, which meant the parallel executor needed to compare more bitsets per system and manage more state.
I initially got the "separate resources" idea from `legion`. I think that design was motivated by the fact that it made the direct world query/resource lifetime interactions more manageable. It certainly made our lives easier when using Resources alongside hecs/bevy_ecs. However we already have a construct for safely and ergonomically managing in-world lifetimes: systems (which use `Access<T>` internally).
This pr merges Resources into World:
```rust
world.insert_resource(1);
world.insert_resource(2.0);
let a = world.get_resource::<i32>().unwrap();
let mut b = world.get_resource_mut::<f64>().unwrap();
*b = 3.0;
```
Resources are now just a special kind of component. They have their own ComponentIds (and their own resource TypeId->ComponentId scope, so they don't conflict wit components of the same type). They are stored in a special "resource archetype", which stores components inside the archetype using a new `unique_components` sparse set (note that this sparse set could later be used to implement Tags). This allows us to keep the code size small by reusing existing datastructures (namely Column, Archetype, ComponentFlags, and ComponentInfo). This allows us the executor to use a single `Access<ArchetypeComponentId>` per system. It should also make scripting language integration easier.
_But_ this merge did create problems for people directly interacting with `World`. What if you need mutable access to multiple resources at the same time? `world.get_resource_mut()` borrows World mutably!
## WorldCell
WorldCell applies the `Access<ArchetypeComponentId>` concept to direct world access:
```rust
let world_cell = world.cell();
let a = world_cell.get_resource_mut::<i32>().unwrap();
let b = world_cell.get_resource_mut::<f64>().unwrap();
```
This adds cheap runtime checks (a sparse set lookup of `ArchetypeComponentId` and a counter) to ensure that world accesses do not conflict with each other. Each operation returns a `WorldBorrow<'w, T>` or `WorldBorrowMut<'w, T>` wrapper type, which will release the relevant ArchetypeComponentId resources when dropped.
World caches the access sparse set (and only one cell can exist at a time), so `world.cell()` is a cheap operation.
WorldCell does _not_ use atomic operations. It is non-send, does a mutable borrow of world to prevent other accesses, and uses a simple `Rc<RefCell<ArchetypeComponentAccess>>` wrapper in each WorldBorrow pointer.
The api is currently limited to resource access, but it can and should be extended to queries / entity component access.
## Resource Scopes
WorldCell does not yet support component queries, and even when it does there are sometimes legitimate reasons to want a mutable world ref _and_ a mutable resource ref (ex: bevy_render and bevy_scene both need this). In these cases we could always drop down to the unsafe `world.get_resource_unchecked_mut()`, but that is not ideal!
Instead developers can use a "resource scope"
```rust
world.resource_scope(|world: &mut World, a: &mut A| {
})
```
This temporarily removes the `A` resource from `World`, provides mutable pointers to both, and re-adds A to World when finished. Thanks to the move to ComponentIds/sparse sets, this is a cheap operation.
If multiple resources are required, scopes can be nested. We could also consider adding a "resource tuple" to the api if this pattern becomes common and the boilerplate gets nasty.
## Query Conflicts Use ComponentId Instead of ArchetypeComponentId
For safety reasons, systems cannot contain queries that conflict with each other without wrapping them in a QuerySet. On bevy `main`, we use ArchetypeComponentIds to determine conflicts. This is nice because it can take into account filters:
```rust
// these queries will never conflict due to their filters
fn filter_system(a: Query<&mut A, With<B>>, b: Query<&mut B, Without<B>>) {
}
```
But it also has a significant downside:
```rust
// these queries will not conflict _until_ an entity with A, B, and C is spawned
fn maybe_conflicts_system(a: Query<(&mut A, &C)>, b: Query<(&mut A, &B)>) {
}
```
The system above will panic at runtime if an entity with A, B, and C is spawned. This makes it hard to trust that your game logic will run without crashing.
In this pr, I switched to using `ComponentId` instead. This _is_ more constraining. `maybe_conflicts_system` will now always fail, but it will do it consistently at startup. Naively, it would also _disallow_ `filter_system`, which would be a significant downgrade in usability. Bevy has a number of internal systems that rely on disjoint queries and I expect it to be a common pattern in userspace.
To resolve this, I added a new `FilteredAccess<T>` type, which wraps `Access<T>` and adds with/without filters. If two `FilteredAccess` have with/without values that prove they are disjoint, they will no longer conflict.
## EntityRef / EntityMut
World entity operations on `main` require that the user passes in an `entity` id to each operation:
```rust
let entity = world.spawn((A, )); // create a new entity with A
world.get::<A>(entity);
world.insert(entity, (B, C));
world.insert_one(entity, D);
```
This means that each operation needs to look up the entity location / verify its validity. The initial spawn operation also requires a Bundle as input. This can be awkward when no components are required (or one component is required).
These operations have been replaced by `EntityRef` and `EntityMut`, which are "builder-style" wrappers around world that provide read and read/write operations on a single, pre-validated entity:
```rust
// spawn now takes no inputs and returns an EntityMut
let entity = world.spawn()
.insert(A) // insert a single component into the entity
.insert_bundle((B, C)) // insert a bundle of components into the entity
.id() // id returns the Entity id
// Returns EntityMut (or panics if the entity does not exist)
world.entity_mut(entity)
.insert(D)
.insert_bundle(SomeBundle::default());
{
// returns EntityRef (or panics if the entity does not exist)
let d = world.entity(entity)
.get::<D>() // gets the D component
.unwrap();
// world.get still exists for ergonomics
let d = world.get::<D>(entity).unwrap();
}
// These variants return Options if you want to check existence instead of panicing
world.get_entity_mut(entity)
.unwrap()
.insert(E);
if let Some(entity_ref) = world.get_entity(entity) {
let d = entity_ref.get::<D>().unwrap();
}
```
This _does not_ affect the current Commands api or terminology. I think that should be a separate conversation as that is a much larger breaking change.
## Safety Improvements
* Entity reservation in Commands uses a normal world borrow instead of an unsafe transmute
* QuerySets no longer transmutes lifetimes
* Made traits "unsafe" when implementing a trait incorrectly could cause unsafety
* More thorough safety docs
## RemovedComponents SystemParam
The old approach to querying removed components: `query.removed:<T>()` was confusing because it had no connection to the query itself. I replaced it with the following, which is both clearer and allows us to cache the ComponentId mapping in the SystemParamState:
```rust
fn system(removed: RemovedComponents<T>) {
for entity in removed.iter() {
}
}
```
## Simpler Bundle implementation
Bundles are no longer responsible for sorting (or deduping) TypeInfo. They are just a simple ordered list of component types / data. This makes the implementation smaller and opens the door to an easy "nested bundle" implementation in the future (which i might even add in this pr). Duplicate detection is now done once per bundle type by World the first time a bundle is used.
## Unified WorldQuery and QueryFilter types
(don't worry they are still separate type _parameters_ in Queries .. this is a non-breaking change)
WorldQuery and QueryFilter were already basically identical apis. With the addition of `FetchState` and more storage-specific fetch methods, the overlap was even clearer (and the redundancy more painful).
QueryFilters are now just `F: WorldQuery where F::Fetch: FilterFetch`. FilterFetch requires `Fetch<Item = bool>` and adds new "short circuit" variants of fetch methods. This enables a filter tuple like `(With<A>, Without<B>, Changed<C>)` to stop evaluating the filter after the first mismatch is encountered. FilterFetch is automatically implemented for `Fetch` implementations that return bool.
This forces fetch implementations that return things like `(bool, bool, bool)` (such as the filter above) to manually implement FilterFetch and decide whether or not to short-circuit.
## More Granular Modules
World no longer globs all of the internal modules together. It now exports `core`, `system`, and `schedule` separately. I'm also considering exporting `core` submodules directly as that is still pretty "glob-ey" and unorganized (feedback welcome here).
## Remaining Draft Work (to be done in this pr)
* ~~panic on conflicting WorldQuery fetches (&A, &mut A)~~
* ~~bevy `main` and hecs both currently allow this, but we should protect against it if possible~~
* ~~batch_iter / par_iter (currently stubbed out)~~
* ~~ChangedRes~~
* ~~I skipped this while we sort out #1313. This pr should be adapted to account for whatever we land on there~~.
* ~~The `Archetypes` and `Tables` collections use hashes of sorted lists of component ids to uniquely identify each archetype/table. This hash is then used as the key in a HashMap to look up the relevant ArchetypeId or TableId. (which doesn't handle hash collisions properly)~~
* ~~It is currently unsafe to generate a Query from "World A", then use it on "World B" (despite the api claiming it is safe). We should probably close this gap. This could be done by adding a randomly generated WorldId to each world, then storing that id in each Query. They could then be compared to each other on each `query.do_thing(&world)` operation. This _does_ add an extra branch to each query operation, so I'm open to other suggestions if people have them.~~
* ~~Nested Bundles (if i find time)~~
## Potential Future Work
* Expand WorldCell to support queries.
* Consider not allocating in the empty archetype on `world.spawn()`
* ex: return something like EntityMutUninit, which turns into EntityMut after an `insert` or `insert_bundle` op
* this actually regressed performance last time i tried it, but in theory it should be faster
* Optimize SparseSet::insert (see `PERF` comment on insert)
* Replace SparseArray `Option<T>` with T::MAX to cut down on branching
* would enable cheaper get_unchecked() operations
* upstream fixedbitset optimizations
* fixedbitset could be allocation free for small block counts (store blocks in a SmallVec)
* fixedbitset could have a const constructor
* Consider implementing Tags (archetype-specific by-value data that affects archetype identity)
* ex: ArchetypeA could have `[A, B, C]` table components and `[D(1)]` "tag" component. ArchetypeB could have `[A, B, C]` table components and a `[D(2)]` tag component. The archetypes are different, despite both having D tags because the value inside D is different.
* this could potentially build on top of the `archetype.unique_components` added in this pr for resource storage.
* Consider reverting `all_tuples` proc macro in favor of the old `macro_rules` implementation
* all_tuples is more flexible and produces cleaner documentation (the macro_rules version produces weird type parameter orders due to parser constraints)
* but unfortunately all_tuples also appears to make Rust Analyzer sad/slow when working inside of `bevy_ecs` (does not affect user code)
* Consider "resource queries" and/or "mixed resource and entity component queries" as an alternative to WorldCell
* this is basically just "systems" so maybe it's not worth it
* Add more world ops
* `world.clear()`
* `world.reserve<T: Bundle>(count: usize)`
* Try using the old archetype allocation strategy (allocate new memory on resize and copy everything over). I expect this to improve batch insertion performance at the cost of unbatched performance. But thats just a guess. I'm not an allocation perf pro :)
* Adapt Commands apis for consistency with new World apis
## Benchmarks
key:
* `bevy_old`: bevy `main` branch
* `bevy`: this branch
* `_foreach`: uses an optimized for_each iterator
* ` _sparse`: uses sparse set storage (if unspecified assume table storage)
* `_system`: runs inside a system (if unspecified assume test happens via direct world ops)
### Simple Insert (from ecs_bench_suite)
### Simpler Iter (from ecs_bench_suite)
### Fragment Iter (from ecs_bench_suite)
### Sparse Fragmented Iter
Iterate a query that matches 5 entities from a single matching archetype, but there are 100 unmatching archetypes
### Schedule (from ecs_bench_suite)
### Add Remove Component (from ecs_bench_suite)
### Add Remove Component Big
Same as the test above, but each entity has 5 "large" matrix components and 1 "large" matrix component is added and removed
### Get Component
Looks up a single component value a large number of times
You should be able to set the minimum and maximum desired resolution of a system window.
This also fixes a bug on Windows operating system: When you try to resize to 0 on the height it crashes.
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
The `bevy_winit` crate hasn't been able to build on docs.rs [since 0.2.1](https://docs.rs/crate/bevy_winit/0.4.0). This PR restores the ability of docs.rs to build `bevy_winit` again.
(The choice of backend is essentially arbitrary, but choosing one *is required* for the crate to build)
