# Objective
As discussed in #15341, ghost nodes are a contentious and experimental
feature. In the interest of enabling ecosystem experimentation, we've
decided to keep them in Bevy 0.15.
That said, we don't use them internally, and don't expect third-party
crates to support them. If the experimentation returns a negative result
(they aren't very useful, an alternative design is preferred etc) they
will be removed.
We should clearly communicate this status to users, and make sure that
users don't use ghost nodes in their projects without a very clear
understanding of what they're getting themselves into.
## Solution
To make life easy for users (and Bevy), `GhostNode` and all associated
helpers remain public and are always available.
However, actually constructing these requires enabling a feature flag
that's clearly marked as experimental. To do so, I've added a
meaningless private field.
When the feature flag is enabled, our constructs (`new` and `default`)
can be used. I've added a `new` constructor, which should be preferred
over `Default::default` as that can be readily deprecated, allowing us
to prompt users to swap over to the much nicer `GhostNode` syntax once
this is a unit struct again.
Full credit: this was mostly @cart's design: I'm just implementing it!
## Testing
I've run the ghost_nodes example and it fails to compile without the
feature flag. With the feature flag, it works fine :)
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
Fixes#15834
## Migration Guide
The APIs of `Time`, `Timer` and `Stopwatch` have been cleaned up for
consistency with each other and the standard library's `Duration` type.
The following methods have been renamed:
- `Stowatch::paused` -> `Stopwatch::is_paused`
- `Time::elapsed_seconds` -> `Time::elasped_secs` (including `_f64` and
`_wrapped` variants)
# Objective
- UI materials reserve too much capacity in a vec: for every node in the
transparent phase, it reserves enough memory to store all the nodes
- Update #10437
## Solution
- Only reserve extra memory if there's not enough
- Only reserve the needed memory, not more
# Objective
In `queue_shadows`, the `UiBoxShadows` option is unwrapped incorrectly
which results in the number of shadow samples being set to
`u32::default()` instead of `UiBoxShadows::default()` if the camera
entity doesn't have the component.
## Solution
Just use `unwrap_or_default` directly without `map`.
# Objective
Remove `bevy-ui`'s non-functional "bevy_text" feature.
Fixes#15900
## Solution
Remove all the "bevy_text" cfg gates.
I tried to fix it at first but couldn't figure it out. I'll happily
withdraw this in favour of another PR that gets the feature gate
working.
# Objective
`TextFont` and `TextColor` is not registered in the app type registry
and serializing a scene with a a `Text2d` doesn't save the color and
font of the text entity.
## Solution
register `TextFont` and `TextColor` in the type registry
# Objective
Limited implementation of the CSS property `overflow-clip-margin`
https://developer.mozilla.org/en-US/docs/Web/CSS/overflow-clip-margin
Allows you to control the visible area for clipped content when using
overfllow-clip, -hidden, or -scroll and expand it with a margin.
Based on #15442Fixes#15468
## Solution
Adds a new field to Style: `overflow_clip_margin: OverflowClipMargin`.
The field is ignored unless overflow-clip, -hidden or -scroll is set on
at least one axis.
`OverflowClipMargin` has these associated constructor functions:
```
pub const fn content_box() -> Self;
pub const fn padding_box() -> Self;
pub const fn border_box() -> Self;
```
You can also use the method `with_margin` to increases the size of the
visible area:
```
commands
.spawn(NodeBundle {
style: Style {
width: Val::Px(100.),
height: Val::Px(100.),
padding: UiRect::all(Val::Px(20.)),
border: UiRect::all(Val::Px(5.)),
overflow: Overflow::clip(),
overflow_clip_margin: OverflowClipMargin::border_box().with_margin(25.),
..Default::default()
},
border_color: Color::BLACK.into(),
background_color: GRAY.into(),
..Default::default()
})
```
`with_margin` expects a length in logical pixels, negative values are
clamped to zero.
## Notes
* To keep this PR as simple as possible I omitted responsive margin
values support. This could be added in a follow up if we want it.
* CSS also supports a `margin-box` option but we don't have access to
the margin values in `Node` so it's probably not feasible to implement
atm.
## Testing
```cargo run --example overflow_clip_margin```
<img width="396" alt="overflow-clip-margin" src="https://github.com/user-attachments/assets/07b51cd6-a565-4451-87a0-fa079429b04b">
## Migration Guide
Style has a new field `OverflowClipMargin`. It allows users to set the visible area for clipped content when using overflow-clip, -hidden, or -scroll and expand it with a margin.
There are three associated constructor functions `content_box`, `padding_box` and `border_box`:
* `content_box`: elements painted outside of the content box area (the innermost part of the node excluding the padding and border) of the node are clipped. This is the new default behaviour.
* `padding_box`: elements painted outside outside of the padding area of the node are clipped.
* `border_box`: elements painted outside of the bounds of the node are clipped. This matches the behaviour from Bevy 0.14.
There is also a `with_margin` method that increases the size of the visible area by the given number in logical pixels, negative margin values are clamped to zero.
`OverflowClipMargin` is ignored unless overflow-clip, -hidden or -scroll is also set on at least one axis of the UI node.
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
- This is a followup to #15812.
## Solution
I just deleted the `COUNT` const and replaced it. I didn't realize for
loops are not const yet, so improving the other const variables is not
obvious.
Note: `slice::len` has been const since Rust 1.39, so we're not relying
on a brand new feature or anything.
## Testing
- It builds!
# Objective
On HEAD, `bevy_color` does not compile on its own with `--all-features`
enabled. This PR fixes that.
## Solution
- Added the `curve` feature on `bevy_math` to `bevy_color`.
- Added the `serialize` feature on `bevy_math` to
`bevy_color/serialize`.
## Testing
- Compiled with `cargo b -p bevy_color --all-features` on HEAD and on
this PR: it fails to compile on HEAD but compiles with this PR.
# Objective
- `C: ExtractComponent` inserts `C::Out` instead of `C`, so we need to
remove `C::Out`. cc #15904.
## Solution
- `C` -> `C::Out`
## Testing
- CAS has `<ContrastAdaptiveSharpening as ExtractComponent>::Out =
(DenoiseCas, CasUniform)`. Setting its strength to zero correctly
removes the effect after this change.
# Objective
Add an example for the new drag move and drag resize introduced by PR
#15674 and fix#15734.
## Solution
I created an example that allows the user to exercise drag move and drag
resize separately. The user can also choose what direction the resize
works in.
### Name
The example is called `window_drag_move`. Happy to have that
bikeshedded.
### Contentious Refactor?
This PR removed the `ResizeDirection` enumeration in favor of using
`CompassOctant` which had the same variants. Perhaps this is
contentious.
### Unsafe?
In PR #15674 I mentioned that `start_drag_move()` and
`start_drag_resize()`'s requirement to only be called in the presence of
a left-click looks like a compiler-unenforceable contract that can cause
intermittent panics when not observed, so perhaps the functions should
be marked them unsafe. **I have not made that change** here since I
didn't see a clear consensus on that.
## Testing
I exercised this on x86 macOS. However, winit for macOS does not support
drag resize. It reports a good error when `start_drag_resize()` is
called. I'd like to see it tested on Windows and Linux.
---
## Showcase
Example window_drag_move shows how to drag or resize a window without
decoration.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Make `StableInterpolate` "just work" on tuples whose parts are each
`StableInterpolate` types. These types arise notably through
`Curve::zip` (or just through explicit mapping of a similar form). It
would otherwise be kind of frustrating to stumble upon such a thing and
then realize that, e.g., automatic resampling just doesn't work, even
though there is a very "obvious" way to do it.
## Solution
Infer `StableInterpolate` on tuples of up to size 11. I can make that
number bigger, if desired. Unfortunately, I don't think that our
standard "fake variadics" tools actually work for this; the anonymous
field accessors of tuples are `:tt` for purposes of macro expansion,
which means that you can't simplify away the identifiers by doing
something clever like using recursion (which would work if they were
`:expr`). Maybe someone who knows some incredibly dark magic could chime
in with a better solution.
The expanded impls look like this:
```rust
impl<
T0: StableInterpolate,
T1: StableInterpolate,
T2: StableInterpolate,
T3: StableInterpolate,
T4: StableInterpolate,
> StableInterpolate for (T0, T1, T2, T3, T4)
{
fn interpolate_stable(&self, other: &Self, t: f32) -> Self {
(
<T0 as StableInterpolate>::interpolate_stable(&self.0, &other.0, t),
<T1 as StableInterpolate>::interpolate_stable(&self.1, &other.1, t),
<T2 as StableInterpolate>::interpolate_stable(&self.2, &other.2, t),
<T3 as StableInterpolate>::interpolate_stable(&self.3, &other.3, t),
<T4 as StableInterpolate>::interpolate_stable(&self.4, &other.4, t),
)
}
}
```
## Testing
Expanded macros; it compiles.
## Future
Make a version of the fake variadics workflow that supports this kind of
thing.
# Objective
Closes#15799.
Many rendering people and maintainers are in favor of reverting default
mesh materials added in #15524, especially as the migration to required
component is already large and heavily breaking.
## Solution
Revert default mesh materials, and adjust docs accordingly.
- Remove `extract_default_materials`
- Remove `clear_material_instances`, and move the logic back into
`extract_mesh_materials`
- Remove `HasMaterial2d` and `HasMaterial3d`
- Change default material handles back to pink instead of white
- 2D uses `Color::srgb(1.0, 0.0, 1.0)`, while 3D uses `Color::srgb(1.0,
0.0, 0.5)`. Not sure if this is intended.
There is now no indication at all about missing materials for `Mesh2d`
and `Mesh3d`. Having a mesh without a material renders nothing.
## Testing
I ran `2d_shapes`, `mesh2d_manual`, and `3d_shapes`, with and without
mesh material components.
# Objective
Fixes#15730.
## Solution
As part of #15586, we made a constant to store all the supported image
formats. However since the `ImageFormat` does actually include Hdr and
OpenExr, it also included the `"hdr"` and `"exr"` file extensions. These
are supported by separate loaders though: `HdrTextureLoader` and
`ExrTextureLoader`. This led to a warning about duplicate asset loaders.
Therefore, instead of having the constant for `ImageFormat`, I made the
constant just for `ImageLoader`. This lets us correctly remove `"hdr"`
and `"exr"` from the image formats supported by `ImageLoader`, returning
us to having a single asset loader for every image format.
Note: we could have just removed `hdr` and `exr` from
`ImageFormat::SUPPORTED_FILE_EXTENSIONS`, but this would be very
confusing. Then the list of `ImageFormat`s would not match the list of
supported formats!
## Testing
- I ran the `sprite` example and got no warning! I also replaced the
sprite in that example with an HDR file and everything worked as
expected.
See #15924 for more details
close#15924
from the issue, this code panic:
```rust
use bevy::time::Stopwatch;
use std::time::Duration;
fn main() {
let second = Duration::from_secs(1);
let mut stopwatch = Stopwatch::new();
// lot of time has passed... or a timer with Duration::MAX that was artificially set has "finished":
// timer.set_elapsed(timer.remaining());
stopwatch.set_elapsed(Duration::MAX);
// panic
stopwatch.tick(second);
let mut stopwatch = Stopwatch::new();
stopwatch.set_elapsed(Duration::MAX - second);
// this doesnt panic as its still one off the max
stopwatch.tick(second);
// this panic
stopwatch.tick(second);
}
```
with this PR changes, the code now doesn't panic.
have a good day !
This is 3 of 5 iterative PR's that affect bevy_ui/layout
- [x] Blocked by https://github.com/bevyengine/bevy/pull/12801
- [x] Blocked by https://github.com/bevyengine/bevy/pull/12802
---
# Objective
- Add tests to `UiSurface`
- Add missing asserts in `_assert_send_sync_ui_surface_impl_safe`
- Add missing Debug field print for `camera_entity_to_taffy`
## Solution
- Adds tests to `UiSurface`
- Adds missing asserts in `_assert_send_sync_ui_surface_impl_safe`
- Adds missing impl Debug field print for `camera_entity_to_taffy`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#15897
## Solution
- Despawn light view entities when they go unused or when the
corresponding view is not alive.
## Testing
- `scene_viewer` example no longer prints "The preprocessing index
buffer wasn't present" warning
- modified an example to try toggling shadows for all kinds of light:
https://gist.github.com/akimakinai/ddb0357191f5052b654370699d2314cf
# Objective
Ensure that components that are conditionally extracted do not linger in
the render world when not extracted from the main world.
## Solution
If the `ExtractComponent` returns `None`, we'll remove the render world
component. I think this is the most sensible behavior here. In the
future if there really is a use case for keeping the previous render
component around, we could add a `Option<Self::Out>` parameter for the
previous render component to the method, or something similar. I think
that this follows the principle of least surprise here relative to what
`None` would suggest and the way that render nodes are typically
written. The alternative would be to add an `enabled` field to pretty
much every camera settings component, or duplicate the extraction
condition as #15856 does.
## Testing
`transmission` no longer crashes.
## Migration Guide
Components that implement `ExtractComponent` and return `None` will
cause the extracted component to be removed from the render world.
# Objective
Currently, is is very painful to wait for an asset to load from the
context of an `async` task. While bevy's `AssetServer` is asynchronous
at its core, the public API is mainly focused on being used from
synchronous contexts such as bevy systems. Currently, the best way of
waiting for an asset handle to finish loading is to have a system that
runs every frame, and either listens for `AssetEvents` or manually polls
the asset server. While this is an acceptable interface for bevy
systems, it is extremely awkward to do this in a way that integrates
well with the `async` task system. At my work we had to create our own
(inefficient) abstraction that encapsulated the boilerplate of checking
an asset's load status and waking up a task when it's done.
## Solution
Add the method `AssetServer::wait_for_asset`, which returns a future
that suspends until the asset associated with a given `Handle` either
finishes loading or fails to load.
## Testing
- CI
## Notes
This is an adoption of #14431, the above description is directly from
that original PR.
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
Co-authored-by: andriyDev <andriydzikh@gmail.com>
# Objective
Improve the average user's ability to understand what the heck is going
on with the Curve API.
## Solution
I wrote some docs. I doubt these are perfect; I'm probably far too close
to this for that to be the case. :)
# Objective
Cleanup naming and docs, add missing migration guide after #15591
All text root nodes now use `Text` (UI) / `Text2d`.
All text readers/writers use `Text<Type>Reader`/`Text<Type>Writer`
convention.
---
## Migration Guide
Doubles as #15591 migration guide.
Text bundles (`TextBundle` and `Text2dBundle`) were removed in favor of
`Text` and `Text2d`.
Shared configuration fields were replaced with `TextLayout`, `TextFont`
and `TextColor` components.
Just `TextBundle`'s additional field turned into `TextNodeFlags`
component,
while `Text2dBundle`'s additional fields turned into `TextBounds` and
`Anchor` components.
Text sections were removed in favor of hierarchy-based approach.
For root text entities with `Text` or `Text2d` components, child
entities with `TextSpan` will act as additional text sections.
To still access text spans by index, use the new `TextUiReader`,
`Text2dReader` and `TextUiWriter`, `Text2dWriter` system parameters.
# Objective
This is a follow-up to #15650. While the core `Image` stuff moved from
`bevy_render` to `bevy_image`, the `ImageLoader` and the
`CompressedImageSaver` remained in `bevy_render`.
## Solution
I moved `ImageLoader` and `CompressedImageSaver` to `bevy_image` and
re-exported everything out from `bevy_render`. The second step isn't
strictly necessary, but `bevy_render` is already doing this for all the
other `bevy_image` types, so I kept it the same for consistency.
Unfortunately I had to give `ImageLoader` a constructor so I can keep
the `RenderDevice` stuff in `bevy_render`.
## Testing
It compiles!
## Migration Guide
- `ImageLoader` can no longer be initialized directly through
`init_asset_loader`. Now you must use
`app.register_asset_loader(ImageLoader::new(supported_compressed_formats))`
(check out the implementation of `bevy_render::ImagePlugin`). This only
affects you if you are initializing the loader manually and does not
affect users of `bevy_render::ImagePlugin`.
## Followup work
- We should be able to move most of the `ImagePlugin` to `bevy_image`.
This would likely require an `ImagePlugin` and a `RenderImagePlugin` or
something though.
# Objective
- Closes#14774
## Solution
Added:
```rust
impl<'w, E, B: Bundle> Trigger<'w, E, B> {
pub fn components(&self) -> &[ComponentId];
}
```
I went with storing it in the trigger as a `SmallVec<[Component; 1]>`
because a singular target component will be the most common case, and it
remains the same size as `Vec<ComponentId>`.
## Testing
Added a test.
# Objective
Change UI clipping to respect borders and padding.
Fixes#15335
## Solution
Based on #15163
1. Add a `padding` field to `Node`.
2. In `ui_layout_size` copy the padding values from taffy to
`Node::padding`.
4. Determine the node's content box (The innermost part of the node
excluding the padding and border).
5. In `update_clipping` perform the clipping intersection with the
node's content box.
## Notes
* `Rect` probably needs some helper methods for working with insets but
because `Rect` and `BorderRect` are in different crates it's awkward to
add them. Left for a follow up.
* We could have another `Overflow` variant (probably called
`Overflow::Hidden`) to that clips inside of the border box instead of
the content box. Left it out here as I'm not certain about the naming or
behaviour though. If this PR is adopted, it would be trivial to add a
`Hidden` variant in a follow up.
* Depending on UI scaling there are sometimes gaps in the layout:
<img width="532" alt="rounding-bug"
src="https://github.com/user-attachments/assets/cc29aa0d-44fe-403f-8f0e-cd28a8b1d1b3">
This is caused by existing bugs in `ui_layout_system`'s coordinates
rounding and not anything to do with the changes in this PR.
## Testing
This PR also changes the `overflow` example to display borders on the
overflow nodes so you can see how this works:
#### main (The image is clipped at the edges of the node, overwriting
the border).
<img width="722" alt="main_overflow"
src="https://github.com/user-attachments/assets/eb316cd0-fff8-46ee-b481-e0cd6bab3f5c">
#### this PR (The image is clipped at the edges of the node's border).
<img width="711" alt="content-box-clip"
src="https://github.com/user-attachments/assets/fb302e56-9302-47b9-9a29-ec3e15fe9a9f">
## Migration Guide
Migration guide is on #15561
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
Another clippy-lint fix: the goal is so that `ci lints` actually
displays the problems that a contributor caused, and not a bunch of
existing stuff in the repo. (when run on nightly)
## Solution
This fixes all but the `clippy::needless_lifetimes` lint, which will
result in substantially more fixes and be in other PR(s). I also
explicitly allow `non_local_definitions` since it is [not working
correctly, but will be
fixed](https://github.com/rust-lang/rust/issues/131643).
A few things were manually fixed: for example, some places had an
explicitly defined `div_ceil` function that was used, which is no longer
needed since this function is stable on unsigned integers. Also, empty
lines in doc comments were handled individually.
## Testing
I ran `cargo clippy --workspace --all-targets --all-features --fix
--allow-staged` with the `clippy::needless_lifetimes` lint marked as
`allow` in `Cargo.toml` to avoid fixing that too. It now passes with all
but the listed lint.
# Objective
- Android doesn't receive lifecycle event `Suspended` before suspension
## Solution
- Fix update triggering just after state change on android
## Testing
- Tested on the android emulator
# Objective
The type `AssetLoadError` has `PartialEq` and `Eq` impls, which is
problematic due to the fact that the `AssetLoaderError` and
`AddAsyncError` variants lie in their impls: they will return `true` for
any `Box<dyn Error>` with the same `TypeId`, even if the actual value is
different. This can lead to subtle bugs if a user relies on the equality
comparison to ensure that two values are equal.
The same is true for `DependencyLoadState`,
`RecursiveDependencyLoadState`.
More generally, it is an anti-pattern for large error types involving
dynamic dispatch, such as `AssetLoadError`, to have equality
comparisons. Directly comparing two errors for equality is usually not
desired -- if some logic needs to branch based on the value of an error,
it is usually more correct to check for specific variants and inspect
their fields.
As far as I can tell, the only reason these errors have equality
comparisons is because the `LoadState` enum wraps `AssetLoadError` for
its `Failed` variant. This equality comparison is only used to check for
`== LoadState::Loaded`, which we can easily replace with an `is_loaded`
method.
## Solution
Remove the `{Partial}Eq` impls from `LoadState`, which also allows us to
remove it from the error types.
## Migration Guide
The types `bevy_asset::AssetLoadError` and `bevy_asset::LoadState` no
longer support equality comparisons. If you need to check for an asset's
load state, consider checking for a specific variant using
`LoadState::is_loaded` or the `matches!` macro. Similarly, consider
using the `matches!` macro to check for specific variants of the
`AssetLoadError` type if you need to inspect the value of an asset load
error in your code.
`DependencyLoadState` and `RecursiveDependencyLoadState` are not
released yet, so no migration needed,
---------
Co-authored-by: Joseph <21144246+JoJoJet@users.noreply.github.com>
# Objective
#15320 is a particularly painful breaking change, and the new
`RenderEntity` in particular is very noisy, with a lot of `let entity =
entity.id()` spam.
## Solution
Implement `WorldQuery`, `QueryData` and `ReadOnlyQueryData` for
`RenderEntity` and `WorldEntity`.
These work the same as the `Entity` impls from a user-facing
perspective: they simply return an owned (copied) `Entity` identifier.
This dramatically reduces noise and eases migration.
Under the hood, these impls defer to the implementations for `&T` for
everything other than the "call .id() for the user" bit, as they involve
read-only access to component data. Doing it this way (as opposed to
implementing a custom fetch, as tried in the first commit) dramatically
reduces the maintenance risk of complex unsafe code outside of
`bevy_ecs`.
To make this easier (and encourage users to do this themselves!), I've
made `ReadFetch` and `WriteFetch` slightly more public: they're no
longer `doc(hidden)`. This is a good change, since trying to vendor the
logic is much worse than just deferring to the existing tested impls.
## Testing
I've run a handful of rendering examples (breakout, alien_cake_addict,
auto_exposure, fog_volumes, box_shadow) and nothing broke.
## Follow-up
We should lint for the uses of `&RenderEntity` and `&MainEntity` in
queries: this is just less nice for no reason.
---------
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
# Objective
- closes#15866
## Solution
- Simply migrate where possible.
## Testing
- Expect that CI will do most of the work. Examples is another way of
testing this, as most of the work is in that area.
---
## Notes
For now, this PR doesn't migrate `QueryState::single` and friends as for
now, this look like another issue. So for example, QueryBuilders that
used single or `World::query` that used single wasn't migrated. If there
is a easy way to migrate those, please let me know.
Most of the uses of `Query::single` were removed, the only other uses
that I found was related to tests of said methods, so will probably be
removed when we remove `Query::single`.
# Objective
`insert_or_spawn_batch` exists, but a version for just inserting doesn't
- Closes#2693
- Closes#8384
- Adopts/supersedes #8600
## Solution
Add `insert_batch`, along with the most common `insert` variations:
- `World::insert_batch`
- `World::insert_batch_if_new`
- `World::try_insert_batch`
- `World::try_insert_batch_if_new`
- `Commands::insert_batch`
- `Commands::insert_batch_if_new`
- `Commands::try_insert_batch`
- `Commands::try_insert_batch_if_new`
## Testing
Added tests, and added a benchmark for `insert_batch`.
Performance is slightly better than `insert_or_spawn_batch` when only
inserting:
<details>
<summary>old benchmark</summary>
This was before reworking it to remove the `UnsafeWorldCell`:
</details>
---
## Showcase
Usage is the same as `insert_or_spawn_batch`:
```
use bevy_ecs::{entity::Entity, world::World, component::Component};
#[derive(Component)]
struct A(&'static str);
#[derive(Component, PartialEq, Debug)]
struct B(f32);
let mut world = World::new();
let entity_a = world.spawn_empty().id();
let entity_b = world.spawn_empty().id();
world.insert_batch([
(entity_a, (A("a"), B(0.0))),
(entity_b, (A("b"), B(1.0))),
]);
assert_eq!(world.get::<B>(entity_a), Some(&B(0.0)));
```
# Objective
- Required components replace bundles, but `SpatialBundle` is yet to be
deprecated
## Solution
- Deprecate `SpatialBundle`
- Insert `Transform` and `Visibility` instead in examples using it
- In `spawn` or `insert` inserting a default `Transform` or `Visibility`
with component already requiring either, remove those components from
the tuple
## Testing
- Did you test these changes? If so, how?
Yes, I ran the examples I changed and tests
- Are there any parts that need more testing?
The `gamepad_viewer` and and `custom_shader_instancing` examples don't
work as intended due to entirely unrelated code, didn't check main.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Run examples, or just check that all spawned values are identical
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Linux, wayland trough x11 (cause that's the default feature)
---
## Migration Guide
`SpatialBundle` is now deprecated, insert `Transform` and `Visibility`
instead which will automatically insert all other components that were
in the bundle. If you do not specify these values and any other
components in your `spawn`/`insert` call already requires either of
these components you can leave that one out.
before:
```rust
commands.spawn(SpatialBundle::default());
```
after:
```rust
commands.spawn((Transform::default(), Visibility::default());
```
# Objective
Fixes#15515
## Solution
I went for the simplest solution because "format" in
`shader_format_spirv` didn't sound directly related.
## Testing
The command `cargo b -p bevy --no-default-features -F
spirv_shader_passthrough,x11` failed before, but works now.
# Objective
With the warning removed in
https://github.com/bevyengine/bevy/pull/15736, the rules for the UI tree
changes.
We no longer need to traverse non `Node`/`GhostNode` entities.
## Solution
- Added a filter `Or<(With<Node>, With<GhostNode>)>` to the child
traversal query so we don't unnecessarily traverse nodes that are not
part of the UI tree (like text nodes).
- Also moved the warning for NoUI->UI entities so it is actually
triggered (see comments)
## Testing
- Ran unit tests (still passing)
- Ran the ghost_nodes and ui examples, still works and looks fine 👍
- Tested the warning by spawning a Node under an empty entity.
---
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
Closes#15545.
`bevy_picking` supports UI and sprite picking, but not mesh picking.
Being able to pick meshes would be extremely useful for various games,
tools, and our own examples, as well as scene editors and inspectors.
So, we need a mesh picking backend!
Luckily,
[`bevy_mod_picking`](https://github.com/aevyrie/bevy_mod_picking) (which
`bevy_picking` is based on) by @aevyrie already has a [backend for
it](74f0c3c0fb/backends/bevy_picking_raycast/src/lib.rs)
using [`bevy_mod_raycast`](https://github.com/aevyrie/bevy_mod_raycast).
As a side product of adding mesh picking, we also get support for
performing ray casts on meshes!
## Solution
Upstream a large chunk of the immediate-mode ray casting functionality
from `bevy_mod_raycast`, and add a mesh picking backend based on
`bevy_mod_picking`. Huge thanks to @aevyrie who did all the hard work on
these incredible crates!
All meshes are pickable by default. Picking can be disabled for
individual entities by adding `PickingBehavior::IGNORE`, like normal.
Or, if you want mesh picking to be entirely opt-in, you can set
`MeshPickingBackendSettings::require_markers` to `true` and add a
`RayCastPickable` component to the desired camera and target entities.
You can also use the new `MeshRayCast` system parameter to cast rays
into the world manually:
```rust
fn ray_cast_system(mut ray_cast: MeshRayCast, foo_query: Query<(), With<Foo>>) {
let ray = Ray3d::new(Vec3::ZERO, Dir3::X);
// Only ray cast against entities with the `Foo` component.
let filter = |entity| foo_query.contains(entity);
// Never early-exit. Note that you can change behavior per-entity.
let early_exit_test = |_entity| false;
// Ignore the visibility of entities. This allows ray casting hidden entities.
let visibility = RayCastVisibility::Any;
let settings = RayCastSettings::default()
.with_filter(&filter)
.with_early_exit_test(&early_exit_test)
.with_visibility(visibility);
// Cast the ray with the settings, returning a list of intersections.
let hits = ray_cast.cast_ray(ray, &settings);
}
```
This is largely a direct port, but I did make several changes to match
our APIs better, remove things we don't need or that I think are
unnecessary, and do some general improvements to code quality and
documentation.
### Changes Relative to `bevy_mod_raycast` and `bevy_mod_picking`
- Every `Raycast` and "raycast" has been renamed to `RayCast` and "ray
cast" (similar reasoning as the "Naming" section in #15724)
- `Raycast` system param has been renamed to `MeshRayCast` to avoid
naming conflicts and to be explicit that it is not for colliders
- `RaycastBackend` has been renamed to `MeshPickingBackend`
- `RayCastVisibility` variants are now `Any`, `Visible`, and
`VisibleInView` instead of `Ignore`, `MustBeVisible`, and
`MustBeVisibleAndInView`
- `NoBackfaceCulling` has been renamed to `RayCastBackfaces`, to avoid
implying that it affects the rendering of backfaces for meshes (it
doesn't)
- `SimplifiedMesh` and `RayCastBackfaces` live near other ray casting
API types, not in their own 10 LoC module
- All intersection logic and types are in the same `intersections`
module, not split across several modules
- Some intersection types have been renamed to be clearer and more
consistent
- `IntersectionData` -> `RayMeshHit`
- `RayHit` -> `RayTriangleHit`
- General documentation and code quality improvements
### Removed / Not Ported
- Removed unused ray helpers and types, like `PrimitiveIntersection`
- Removed getters on intersection types, and made their properties
public
- There is no `2d` feature, and `Raycast::mesh_query` and
`Raycast::mesh2d_query` have been merged into `MeshRayCast::mesh_query`,
which handles both 2D and 3D
- I assume this existed previously because `Mesh2dHandle` used to be in
`bevy_sprite`. Now both the 2D and 3D mesh are in `bevy_render`.
- There is no `debug` feature or ray debug rendering
- There is no deferred API (`RaycastSource`)
- There is no `CursorRayPlugin` (the picking backend handles this)
### Note for Reviewers
In case it's helpful, the [first
commit](281638ef10)
here is essentially a one-to-one port. The rest of the commits are
primarily refactoring and cleaning things up in the ways listed earlier,
as well as changes to the module structure.
It may also be useful to compare the original [picking
backend](74f0c3c0fb/backends/bevy_picking_raycast/src/lib.rs)
and [`bevy_mod_raycast`](https://github.com/aevyrie/bevy_mod_raycast) to
this PR. Feel free to mention if there are any changes that I should
revert or something I should not include in this PR.
## Testing
I tested mesh picking and relevant components in some examples, for both
2D and 3D meshes, and added a new `mesh_picking` example. I also
~~stole~~ ported over the [ray-mesh intersection
benchmark](dbc5ef32fe/benches/ray_mesh_intersection.rs)
from `bevy_mod_raycast`.
---
## Showcase
Below is a version of the `2d_shapes` example modified to demonstrate 2D
mesh picking. This is not included in this PR.
https://github.com/user-attachments/assets/7742528c-8630-4c00-bacd-81576ac432bf
And below is the new `mesh_picking` example:
https://github.com/user-attachments/assets/b65c7a5a-fa3a-4c2d-8bbd-e7a2c772986e
There is also a really cool new `mesh_ray_cast` example ported over from
`bevy_mod_raycast`:
https://github.com/user-attachments/assets/3c5eb6c0-bd94-4fb0-bec6-8a85668a06c9
---------
Co-authored-by: Aevyrie <aevyrie@gmail.com>
Co-authored-by: Trent <2771466+tbillington@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
Currently text is recomputed unnecessarily on any changes to its color,
which is extremely expensive.
## Solution
Split up `TextStyle` into two separate components `TextFont` and
`TextColor`.
## Testing
I added this system to `many_buttons`:
```rust
fn set_text_colors_changed(mut colors: Query<&mut TextColor>) {
for mut text_color in colors.iter_mut() {
text_color.set_changed();
}
}
```
reports ~4fps on main, ~50fps with this PR.
## Migration Guide
`TextStyle` has been renamed to `TextFont` and its `color` field has
been moved to a separate component named `TextColor` which newtypes
`Color`.
# Objective
The previous `PhantomData` instances were written somewhat lazily, so
they were just things like `PhantomData<T>` for curves with an output
type of `T`. This looks innocuous, but it unnecessarily constrains
`Send/Sync` inference based on `T`. See
[here](https://doc.rust-lang.org/nomicon/phantom-data.html#table-of-phantomdata-patterns).
## Solution
Switch to `PhantomData` of the form `PhantomData<fn() -> T>` for most of
these adaptors. Since they only have a functional relationship to `T`
(i.e. it shows up in the return type of trait methods), this is more
accurate.
## Testing
Tested by compiling Bevy.
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
MacOS has some nice options for controlling the window and titlebar to
make the content appear much more "immersively" in the window. This PR
exposes options for controlling this.
## Solution
Adds new fields to `Window` to control these, with doc comments to
explain what they do and that they're MacOS only.
## Testing
Tested on a MacOS machine (not my own, I don't have one). That's where
the below screenshots were taken.
---
## Showcase
On MacOS, you now have more options for configuring the window titlebar.
You can, for example, make the title bar transparent and only show the
window controls. This provides a more "immersive" experience for your
rendered content.
Before, only this was possible:
<img width="1392" alt="image"
src="https://github.com/user-attachments/assets/abf03da2-d247-4202-a7e7-731c45d80d54">
Now, you can create windows like this:
<img width="1392" alt="image2"
src="https://github.com/user-attachments/assets/3239d0e3-4708-4798-8755-188541e14f93">
This uses the following `bevy_window::Window` settings:
```rs
fullsize_content_view: true,
titlebar_transparent: true,
titlebar_show_title: false,
```
## Migration Guide
`bevy_window::Window` now has extra fields for configuring MacOS window
settings:
```rs
pub movable_by_window_background: bool,
pub fullsize_content_view: bool,
pub has_shadow: bool,
pub titlebar_shown: bool,
pub titlebar_transparent: bool,
pub titlebar_show_title: bool,
pub titlebar_show_buttons: bool,
```
Using `Window::default` keeps the same behaviour as before.
# Objective
Animation docs could use some clarification regarding:
- how exactly curves are evaluated
- how additive blend nodes actually work
## Solution
Add some documentation that explains how curve domains are used and how
additive blend nodes treat their children.
## Commentary
The way additive blend nodes work right now is a little bit weird, since
their first child's weight is ignored. Arguably this makes sense, since
additive animations are authored differently from ordinary animations,
but it also feels a bit strange. We could make the first node's weight
actually be applied, and the present behavior would be recovered when
the weight is set to 1.
The main disadvantage of how things are set up now is that combining a
bunch of additive animations without a base pose is pretty awkward (e.g.
to add them onto a base pose later in the graph). If we changed it, the
main downside would be that reusing the same animation on different
parts of the graph is harder; on the other hand, the weights can be
locally reassigned by using blend nodes with no other children, which
rectifies this shortfall.
# Objective
On mobile devices, it's best to use the OS's native logging due to the
difficulty of accessing the console. This is already done for Android.
This is an updated version of
https://github.com/bevyengine/bevy/pull/4462.
## Solution
This PR uses Absolucy's
[tracing-oslog](https://github.com/Absolucy/tracing-oslog) ([ZLib
license](https://github.com/Absolucy/tracing-oslog/blob/main/LICENSE.md))
for iOS in order to use Apple's `os_log`.
## Testing
I ran `examples/mobile` with the logging from `examples/app/logs.rs` on
an iOS device, I then checked the logs could be filtered in the MacOS
Console.app.
## Changelog
- Change bevy_log to use Apple's os_log on iOS.
## Questions for Reviewers
It's worth noting that the dependency this adds hasn't had bug fixes
released in a few years, so we may want to consider one or more of:
1. a feature flag to opt-in, and it would also allow `os_log` on MacOS
2. merge as-is and have some (minor?) upstream bugs
3. hold off on this PR until a suitable alternative dependency arises
4. maintain our own implementation
## Future work
In a follow-up PR it might be good to make the `subsystem` field have a
better default value, like [this
one](https://github.com/bevyengine/bevy/blob/main/examples/mobile/bevy_mobile_example.xcodeproj/project.pbxproj#L363).
That value can be retrieved programmatically if we bind another system
API (For posterity in Swift this is `Bundle.main.bundleIdentifier`, but
the C/ObjC equivalent is likely easier to bind). This would almost
always be the correct value, while the current default is unlikely to
ever be correct.
---------
Co-authored-by: Dusty DeWeese <dustin.deweese@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Oftentimes, users will store an entity on a component or resource. To
make this component/resource `Default`-able, they might initialize it
with `Entity::PLACEHOLDER`. This is sometimes done to avoid the need for
an `Option<Entity>`, especially if it complicates other logic.
For example, it's used in this `Selection` resource to denote "no
selection":
```rust
#[derive(Resource, Debug)]
struct Selection(Entity);
impl Default for Selection {
fn default() -> Self {
Self(Entity::PLACEHOLDER)
}
}
```
The problem is that if we try to `Debug` the current `Selection`, we get
back: `4294967295v1#8589934591`. It's not immediately obvious whether or
not the entity is an actual entity or the placeholder.
Now while it doesn't take long to realize that this is in fact just the
value of `Entity::PLACEHOLDER`, it would be a lot clearer if this was
made explicit, especially for these particular use cases.
## Solution
This PR makes the `Debug` and `Display` impls for `Entity` return
`PLACEHOLDER` for the `Entity::PLACEHOLDER` constant.
~~Feel free to bikeshed the actual value returned here. I think
`PLACEHOLDER` on its own could work too.~~ Swapped to `PLACEHOLDER` from
`Entity::PLACEHOLDER`.
## Testing
You can test locally by running:
```
cargo test --package bevy_ecs
```
---
## Migration Guide
The `Debug` and `Display` impls for `Entity` now return `PLACEHOLDER`
for the `Entity::PLACEHOLDER` constant. If you had any code relying on
these values, you may need to account for this change.
# Objective
- Immediate mode gizmos don't have a main world entity but the phase
items require `MainEntity` since #15756
## Solution
- Add a dummy `MainEntity` component.
## Testing
Both the `3d_gizmos` and `2d_gizmos` examples show gizmos again
