u-boot/arch/arm/include/asm/imx-common
Jagan Teki f4b7532f82 arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support
Boot Log for i.CoreM6 DualLite/Solo Starter Kit:
-----------------------------------------------

U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46)
Trying to boot from MMC1

U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530)

CPU:   Freescale i.MX6SOLO rev1.3 at 792MHz
CPU:   Industrial temperature grade (-40C to 105C) at 31C
Reset cause: POR
DRAM:  256 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
switch to partitions #0, OK
mmc0 is current device
reading boot.scr
** Unable to read file boot.scr **
reading zImage
6741808 bytes read in 341 ms (18.9 MiB/s)
Booting from mmc ...
reading imx6dl-icore.dtb
30600 bytes read in 19 ms (1.5 MiB/s)
   Booting using the fdt blob at 0x18000000
   Using Device Tree in place at 18000000, end 1800a787

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0

Boot Log for i.CoreM6 Quad/Dual Starter Kit:
--------------------------------------------

U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46)
Trying to boot from MMC1

U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530)

CPU:   Freescale i.MX6Q rev1.2 at 792MHz
CPU:   Industrial temperature grade (-40C to 105C) at 28C
Reset cause: POR
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
icorem6qdl>

Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26 16:53:16 +02:00
..
boot_mode.h imx: imx7d: Add SoC system support 2015-09-13 10:11:53 +02:00
dma.h imx: apbh_dma: Update APBH-DMA for MX7D 2016-01-24 12:09:16 +01:00
gpio.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
hab.h imx: hab: add secure boot fuse details 2015-10-30 15:22:36 +01:00
imximage.cfg Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
iomux-v3.h imx-common: enlarge mux width to 4 2016-10-04 19:37:28 +02:00
mx5_video.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
mxc_i2c.h dm: i2c: mxc_i2c: implement i2c_idle_bus 2016-03-28 09:22:58 +02:00
rdc-sema.h imx: imx-common: introduce Resource Domain Controller support 2016-02-21 11:46:26 +01:00
regs-apbh.h imx: apbh_dma: Update APBH-DMA for MX7D 2016-01-24 12:09:16 +01:00
regs-bch.h imx: nand: update GPMI NAND driver to support MX7 2016-01-24 12:09:32 +01:00
regs-common.h imx: include linux/types.h for regs-common.h 2015-11-12 17:38:08 +01:00
regs-gpmi.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
regs-lcdif.h imx: lcdif: use one register structure for i.MXes 2015-11-12 17:38:09 +01:00
regs-usbphy.h usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's 2015-04-23 14:56:09 -04:00
sata.h nitrogen6x: Move setup_sata to common part 2013-12-17 18:12:14 +01:00
spi.h ARM: i.MX: provide declaration for board_spi_cs_gpio 2014-10-21 10:47:14 +02:00
sys_proto.h arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support 2016-10-26 16:53:16 +02:00
syscounter.h imx: system counter driver for imx7d and mx6ul 2015-09-13 10:11:53 +02:00
video.h video, ipu: make ldb clock frequency overwritable through board code 2015-04-20 09:36:59 +02:00