Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-12 06:12:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs
History
Stefano Babic 9f481e95ba MXC: Correct SPI_CPOL setting in SPI driver 
The handling of the SPI_CPOL bit inside the SPI
driver was wrong. As reported by the manual,
the meaning of the SSPOL inside the
configuration register is the same as reported
by SPI specification (0 if low in idle, 1 is high
on idle). The driver inverts this logic.

Because this patch sets the logic as specified, it is required
to clear the CPOL bit in the configuration file to adapt
to the correct logic.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: David Jander <david.jander@protonic.nl>
2010-09-30 14:42:13 +02:00
..
manroland configs: remove unused CONFIG_COMMAND_HISTORY 2010-05-04 23:38:50 +02:00
a320evb.h arm: A320: Add support for Faraday A320 evaluation board 2009-11-27 16:26:17 -06:00
A3000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
acadia.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
actux1.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux2.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux3.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux4.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ADCIOP.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Adder.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADS860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
aev.h aev board: Fix compile problems 2010-09-19 19:29:57 +02:00
afeb9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
Alaska8220.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
alpr.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
am3517_evm.h AM3517EVM: musb: add usb config 2010-08-12 16:40:00 +02:00
amcc-common.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
AMX860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ap325rxa.h ide: add configuration 2010-08-08 05:17:05 +05:30
AP1000.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
APC405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
apollon.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
AR405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
aria.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
armadillo.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ASH405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
assabet.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
astro_mcf5373l.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
at91cap9adk.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91rm9200dk.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
at91rm9200ek.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
at91sam9m10g45ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9rlek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9260ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9261ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
at91sam9263ek.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
atc.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atngw100.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
atstk1002.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
atstk1003.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
atstk1004.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
atstk1006.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
ATUM8548.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
B2.h Move lib_$ARCH directories to arch/$ARCH/lib 2010-04-13 09:13:03 +02:00
BAB7xx.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
bamboo.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
barco.h POST cleanup. 2010-09-21 21:39:31 +02:00
BC3450.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
bf518f-ezbrd.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf526-ezbrd.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf527-ad7160-eval.h Blackfin: bf527-ad7160-eval: new board support 2010-07-13 17:50:52 -04:00
bf527-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf533-ezkit.h Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code 2010-07-25 15:16:21 -04:00
bf533-stamp.h Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code 2010-07-25 15:16:21 -04:00
bf537-minotaur.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-pnav.h Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-07-14 21:54:45 +02:00
bf537-srv1.h Blackfin: tweak embedded LDR env config option 2010-01-17 09:17:26 -05:00
bf537-stamp.h POST cleanup. 2010-09-21 21:39:31 +02:00
bf538f-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf548-ezkit.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
bf561-acvilon.h Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2010-07-14 21:54:45 +02:00
bf561-ezkit.h Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code 2010-07-25 15:16:21 -04:00
bfin_adi_common.h POST cleanup. 2010-09-21 21:39:31 +02:00
blackstamp.h Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code 2010-07-25 15:16:21 -04:00
BMW.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
bubinga.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
c2mon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CANBT.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
canmb.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
canyonlands.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
CATcenter.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
CCM.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
cerf250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm-bf527.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf533.h Blackfin: update tiny board settings (voltage/default env) 2010-01-17 09:17:26 -05:00
cm-bf537e.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf537u.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
cm-bf548.h Blackfin: cm-bf548: increase monitor len 2010-08-11 11:29:14 -04:00
cm-bf561.h Blackfin: cm-bf561: update network/env settings 2010-04-07 01:10:34 -04:00
cm41xx.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm4008.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
cmc_pu2.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
cmi_mpc5xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
CMS700.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
cobra5272.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cogent_mpc8260.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
colibri_pxa270.h PXA: Toradex Colibri PXA270 support 2010-07-14 23:27:48 +02:00
corenet_ds.h Prepare v2010.09-rc1 2010-09-10 00:16:19 +02:00
CPC45.h Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE 2010-09-19 19:29:46 +02:00
CPCI2DP.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
CPCI405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
CPCI405AB.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
CPCI405DT.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
CPCI750.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
CPCI4052.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
cpci5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
CPCIISER4.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
CPU86.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CPU87.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
cpu9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
cpuat91.h cpuat91: update defaut environement 2010-08-20 16:42:02 +02:00
cradle.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
CRAYL1.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
csb226.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
csb272.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
csb472.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
csb637.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
CU824.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
da830evm.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
da850evm.h da8xx: fixup ARM relocation support 2010-09-19 19:29:56 +02:00
DASA_SIM.h ppc4xx: Update TEXT_BASE for DASA_SIM boards 2009-03-20 22:39:13 +01:00
davinci_dm355evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm355leopard.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dm365evm.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_dm6467evm.h Davinci: Configurable NAND chip selects 2010-01-04 08:48:17 -06:00
davinci_dvevm.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_schmoogie.h Remove support for CONFIG_HAS_UID and "forceenv" command 2010-09-19 19:29:47 +02:00
davinci_sffsdr.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
davinci_sonata.h DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files 2010-06-22 10:24:43 -04:00
DB64360.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
DB64460.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
dbau1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
debris.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
delta.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
devkit8000.h ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 2010-07-05 19:59:55 -04:00
digsy_mtc.h digsy_mtc: Add TCR register value for RTC (DS1339) 2009-09-24 00:21:06 +02:00
dlvision.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
dnp1110.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
DP405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
DU405.h ppx4xx: remove unused functionality for DU405 boards 2010-09-23 09:02:06 +02:00
DU440.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
EB+MCF-EV123.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
eb_cpux9k2.h new board (eb_cpux9k2) 2010-02-12 12:36:04 -06:00
ebony.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
edb93xx.h Add support for EDB93xx boards 2010-02-12 12:31:54 -06:00
edminiv2.h edminiv2: add I2C support using mvtwsi driver 2010-08-30 14:10:45 +02:00
ELPPC.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
ELPT860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
eNET.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
ep82xxm.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
EP88x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep7312.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ep8248.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ep8260.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ERIC.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
espt.h sh: Add support ESPT-GIGA borad 2009-07-11 09:02:21 +09:00
ESTEEM192E.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ETX094.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
evb4510.h arm: clean cache management 2009-04-05 13:06:31 +02:00
EVB64260.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
eXalion.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EXBITGEN.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
FADS823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS850SAR.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
favr-32-ezkit.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
FLAGADM.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
FPS850L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
FPS860L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
fx12mm.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
G2000.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
galaxy5200.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
gcplus.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
gdppc440etx.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
GEN860T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
GENIETV.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_ep2s60.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
grsim_leon2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
gth2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
guruplug.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
gw8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hammerhead.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
hcu4.h POST cleanup. 2010-09-21 21:39:31 +02:00
hcu5.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
hermes.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HH405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
HIDDEN_DRAGON.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
hmi1001.h POST cleanup. 2010-09-21 21:39:31 +02:00
HUB405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
hymod.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IAD210.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
ibf-dsp561.h Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code 2010-07-25 15:16:21 -04:00
IceCube.h IceCube.h: update configuration 2010-09-19 19:29:46 +02:00
icon.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
ICU862.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
idmr.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
IDS8247.h cfi_flash: Simplify dynamic flash bank number detection 2010-09-20 15:08:51 +02:00
impa7.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
imx27lite-common.h ARM: implement relocation for ARM926 2010-09-19 19:29:54 +02:00
imx27lite.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
imx31_litekit.h MXC: Correct SPI_CPOL setting in SPI driver 2010-09-30 14:42:13 +02:00
imx31_phycore.h Use common function to set GPIOs for MX3 and MX5 2010-09-29 11:24:30 +02:00
incaip.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
inka4x0.h POST cleanup. 2010-09-21 21:39:31 +02:00
innokom.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
integratorap.h integratorap/cp: use cfi driver 2009-06-23 00:10:04 +02:00
integratorcp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
intip.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
ip04.h Blackfin: convert plat-nand code to GPIO framework 2010-07-08 16:52:13 -05:00
IP860.h Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE 2010-09-19 19:29:46 +02:00
ipek01.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
IPHASE4539.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ISPAN.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IVML24.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
IVMS8.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ixdp425.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ixdpg425.h arm: timer and interrupt init rework 2009-06-12 20:39:48 +02:00
jadecpu.h arm: Make jadecpu board use relocation 2010-09-21 21:42:01 +02:00
JSE.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
jupiter.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
KAREF.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
katmai.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
kb9202.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
keymile-common.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
kilauea.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
km8xx.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
km_arm.h ARM: implement relocation for ARM926 2010-09-19 19:29:54 +02:00
kmeter1.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
kmsupx4.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
korat.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
KUP4K.h Prepare v2010.09-rc1 2010-09-10 00:16:19 +02:00
KUP4X.h 8xx, kup4k/kup4x: configuration changes, code cleanup 2010-08-09 00:09:20 +02:00
kvme080.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
LANTEC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
lart.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
linkstation.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
logodl.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpc2292sodimm.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
lpd7a400-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a400.h lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
lpd7a404-10.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
lpd7a404.h Fix SMC91111 regression: lpd7a40x build failures 2009-11-09 21:56:18 -08:00
luan.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
lubbock.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
lwmon.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
lwmon5.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
m501sk.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
M5208EVBE.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5235EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5249EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5253DEMO.h ColdFire: Fix incorrect M5253DEMO default environment 2010-03-24 11:09:39 -05:00
M5253EVBE.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5271EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5272C3.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5275EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5282EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5329EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5373EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5475EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M5485EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M52277EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M53017EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M54451EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
M54455EVB.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
magnesium.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
makalu.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
MBX.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX860T.h ppc: cleanup compiler errors/warnings 2009-03-27 20:23:32 +01:00
mcc200.h mcc200: fix build error 2009-10-19 09:18:57 +02:00
mcu25.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
mecp5123.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
mecp5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
meesc.h at91: Enabeling USB host on meesc board 2010-08-20 16:17:52 +02:00
METROBOX.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
mgcoge.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
mgsuvd.h 8xx, mgsuvd: rename board to a more generic name 2009-03-18 20:50:04 +01:00
MHPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
microblaze-generic.h microblaze: Stop stack clobbering in microblaze-generic. 2009-12-08 08:51:42 +01:00
MigoR.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
mimc200.h avr32: Add simple paging support 2010-09-03 15:13:02 +02:00
MIP405.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
ML2.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
modnet50.h netarm: move serial driver to drivers/serial 2009-03-29 23:01:41 +02:00
motionpro.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
MOUSSE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mp2usb.h add new CONFIG_AT91_LEGACY 2010-02-12 12:31:54 -06:00
MPC86xADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC832XEMDS.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC837XEMDS.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC837XERDB.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC885ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5121-common.h POST cleanup. 2010-09-21 21:39:31 +02:00
mpc5121ads.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
mpc7448hpc2.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
MPC8260ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8266ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
mpc8308_p1m.h mpc83xx: extend CONFIG_SYS_BOOTMAPSZ increase to mpc8308_p1m 2010-09-23 21:14:33 +02:00
MPC8308RDB.h MPC8308RDB: various clean ups 2010-09-23 21:14:08 +02:00
MPC8313ERDB.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8315ERDB.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8323ERDB.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8349EMDS.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8349ITX.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8360EMDS.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8360ERDK.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MPC8536DS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8540ADS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8540EVAL.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8541CDS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8544DS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8548CDS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8555CDS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8560ADS.h powerpc/85xx: configure autocompletion support 2010-08-01 11:18:44 -05:00
MPC8568MDS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8569MDS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8572DS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8610HPCD.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
MPC8641HPCN.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
mpr2.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7720se.h ide: add configuration 2010-08-08 05:17:05 +05:30
ms7722se.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ms7750se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
muas3001.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
mucmc52.h mpc52xx: Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE 2010-09-19 19:29:50 +02:00
munices.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
MUSENKI.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
MVBC_P.h Remove deprecated 'autoscr' command/variables 2009-09-22 23:03:24 +02:00
MVBLM7.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
MVBLUE.h MVBLUE: Remove CONFIG_CMD_IRQ 2009-12-14 21:31:17 +01:00
MVS1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MVSMR.h Remove support for CONFIG_HAS_UID and "forceenv" command 2010-09-19 19:29:47 +02:00
mx1ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx1fs2.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
mx31ads.h MXC: Correct SPI_CPOL setting in SPI driver 2010-09-30 14:42:13 +02:00
mx31pdk.h MXC: Correct SPI_CPOL setting in SPI driver 2010-09-30 14:42:13 +02:00
mx51evk.h MXC: Correct SPI_CPOL setting in SPI driver 2010-09-30 14:42:13 +02:00
NC650.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
neo.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
NETPHONE.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
netstal-common.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
netstar.h netstar.h: do not exceed 80 columns 2010-03-07 12:36:35 -06:00
NETTA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETTA2.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETVIA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
nhk8815.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
nios2-generic.h nios2: add gpio support to nios2-generic board 2010-05-28 10:56:03 -04:00
ns9750dev.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
NSCU.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
NX823.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
o2dnt.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
ocotea.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
OCRTC.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
omap3_beagle.h ARM: implement relocation for ARM V7 (OMAP) 2010-09-19 19:29:53 +02:00
omap3_evm.h ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 2010-07-05 19:59:55 -04:00
omap3_overo.h ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs 2010-09-08 14:51:35 -04:00
omap3_pandora.h ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 2010-07-05 19:59:55 -04:00
omap3_sdp3430.h ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 2010-07-05 19:59:55 -04:00
omap3_zoom1.h ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 2010-07-05 19:59:55 -04:00
omap3_zoom2.h ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 2010-07-05 19:59:55 -04:00
omap4_panda.h ARMV7: Update default environment for OMAP4 boards 2010-08-05 10:11:50 -04:00
omap4_sdp4430.h ARMV7: Update default environment for OMAP4 boards 2010-08-05 10:11:50 -04:00
omap730.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap730p2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1510.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap1510inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610h2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap1610inn.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
omap2420h4.h Remove superfluous uses of V_PROMPT macro. 2010-01-04 08:48:16 -06:00
omap5912osk.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
openrd_base.h Kirkwood: openrd_base: Added SATA support 2010-08-08 05:17:55 +05:30
ORSG.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
otc570.h at91: Defined main clock frequency on esd at91 boards 2010-08-20 16:17:41 +02:00
OXC.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
P1_P2_RDB.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
P3G4.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
p3mx.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
p3p440.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
P1022DS.h powerpc/85xx: configure autocompletion support 2010-08-01 11:18:44 -05:00
P2020DS.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
P4080DS.h powerpc/p4080: Add support for the P4080DS board 2010-08-01 11:18:40 -05:00
PATI.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
pb1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCI405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
PCI5441.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
PCIPPC2.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
PCIPPC6.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
pcm030.h board support patch for phyCORE-MPC5200B-tiny 2009-07-10 23:21:32 +02:00
pcs440ep.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
pcu_e.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
pdm360ng.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
pdnb3.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
pf5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
PIP405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
PK1C20.h nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards. 2010-04-02 12:28:41 -04:00
pleb2.h LAN91C96: Enable NET_MULTI LAN driver 2009-12-13 21:31:26 -08:00
PLU405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
pm9g45.h add new board pm9g45 2010-06-06 08:36:28 -05:00
PM520.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
PM826.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM828.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM854.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
PM856.h mpc85xx: Add reginfo command 2010-07-16 10:55:09 -05:00
pm9261.h pm9261: remove CONFIG_CMD_AUTOSCRIPT 2010-04-30 05:23:22 -05:00
pm9263.h pm9263 converted to at91 soc access 2010-04-30 05:23:26 -05:00
PMC405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
PMC405DE.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
PMC440.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
PN62.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
PPChameleonEVB.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
ppmc7xx.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
ppmc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
purple.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
pxa255_idp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
qemu-mips.h Refresh LZMA-lib to v4.65 2009-07-22 09:43:27 +02:00
qong.h MXC: Correct SPI_CPOL setting in SPI driver 2010-09-30 14:42:13 +02:00
QS823.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS850.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
quad100hd.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
quantum.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
r2dplus.h ide: add configuration 2010-08-08 05:17:05 +05:30
R360MPI.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
r7780mp.h ide: add configuration 2010-08-08 05:17:05 +05:30
Rattler.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
RBC823.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
rd6281a.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
redwood.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
rmu.h rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared 2009-06-10 00:15:11 +02:00
RPXClassic.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
RPXlite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXlite_DW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXsuper.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
RRvision.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsdproto.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsk7203.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
s5p_goni.h ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P 2010-08-26 17:33:23 +09:00
sacsng.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
Sandpoint8240.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Sandpoint8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc35_a9g20.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
sbc405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
sbc2410x.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
sbc8240.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8349.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
SBC8540.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
sbc8548.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
sbc8560.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
sbc8641d.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
sc3.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
scb9328.h Convert DM9000 driver for CONFIG_NET_MULTI 2009-06-15 00:13:55 -07:00
SCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sequoia.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
sh7763rdp.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
sh7785lcr.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
shannon.h shannon/INFERNO: fix special handling of environment configuration 2010-07-04 23:48:55 +02:00
sheevaplug.h mvgbe: support SoCs other than kirkwood 2010-07-12 23:40:31 -07:00
SIMPC8313.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
SM850.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
smdk2400.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk2410.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
smdk6400.h ARM1176: Coexist with other ARM1176 platforms 2010-06-08 10:07:17 -05:00
smdkc100.h ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P 2010-08-26 17:33:23 +09:00
SMN42.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
socrates.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
sorcery.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spc1920.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SPD823TS.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
spear-common.h SPEAr : Support added for SPEAr600 board 2010-01-23 08:15:49 -06:00
spear3xx.h mod change 755 => 644 for multiple files 2010-03-21 22:22:53 +01:00
spear6xx.h mod change 755 => 644 for multiple files 2010-03-21 22:22:53 +01:00
spieval.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
stxgp3.h mpc85xx: Add reginfo command 2010-07-16 10:55:09 -05:00
stxssa.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
stxxtc.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
suen3.h arm: add support for the suen3 board from keymile 2010-03-07 12:36:36 -06:00
svm_sc8xx.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
SX1.h arm925t: Fix CONFIG_SYS_HZ to 1000 2009-04-29 21:39:46 +02:00
SXNI855T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
t3corp.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
taihu.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
taishan.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
TASREG.h ColdFire: Cache update for all platforms 2010-03-24 11:09:37 -05:00
tb0229.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TB5200.h POST cleanup. 2010-09-21 21:39:31 +02:00
tcm-bf518.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
tcm-bf537.h Blackfin: unify default I2C settings for ADI boards 2010-07-13 17:50:52 -04:00
TK885D.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
tnetv107x_evm.h TI: TNETV107X EVM initial support 2010-06-08 10:07:17 -05:00
tny_a9260.h ARM change name of defines for AT91 arm926ejs 2010-03-07 12:36:35 -06:00
TOP860.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
TOP5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
Total5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
TQM85xx.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
TQM823L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM823M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM834x.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
TQM850L.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM850M.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
TQM855L.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM855M.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM860L.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM860M.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM862L.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM862M.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM866M.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM885D.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
TQM5200.h mpc5xxx: Remove all references to MGT5100 2010-03-21 22:44:42 +01:00
TQM8260.h TQM8260: fix locations of kernel and ramdisk images in flash 2009-02-17 10:26:38 +01:00
TQM8272.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
trab.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
trizepsiv.h xscale: add support for the polaris board 2009-07-06 21:52:58 +02:00
tx25.h ARM: implement relocation for ARM926 2010-09-19 19:29:54 +02:00
uc100.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
uc101.h mpc52xx: Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE 2010-09-19 19:29:50 +02:00
utx8245.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
v38b.h net ppc: fix ethernet device names with spaces 2010-08-09 11:52:28 -07:00
VCMA9.h Add a unified s3c24x0 header file 2009-11-27 16:26:13 -06:00
vct.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00
ve8313.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
versatile.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
virtlab2.h TQM8xx: enable device tree support on all TQM8xx based boards. 2010-03-12 00:06:07 +01:00
vme8349.h e300: increase CONFIG_SYS_BOOTMAPSZ to allow booting large kernels 2010-09-23 21:13:32 +02:00
VOH405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
voiceblue.h VoiceBlue: limit line lenght to 80 characters 2010-03-07 12:36:35 -06:00
VOM405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
VoVPN-GW.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
vpac270.h PXA: Declare __io for vpac270 IDE 2010-08-09 01:15:22 +02:00
W7OLMC.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
W7OLMG.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
walnut.h Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature 2010-09-23 09:02:05 +02:00
wepep250.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
WUH405.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
xaeniax.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
xilinx-ppc.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xm250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
XPEDITE1000.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
XPEDITE5170.h powerpc/86xx: Move PCI/PCIe address defines into common immap_86xx.h 2010-07-20 04:37:11 -05:00
XPEDITE5200.h powerpc/85xx: configure autocompletion support 2010-08-01 11:18:44 -05:00
XPEDITE5370.h powerpc/85xx: configure autocompletion support 2010-08-01 11:18:44 -05:00
xsengine.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
yosemite.h ppc4xx: Use common NS16550 driver for PPC4xx UART 2010-09-23 09:02:05 +02:00
yucca.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
Yukon8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
zeus.h Merge branch 'next' of /home/wd/git/u-boot/next 2010-09-28 23:30:47 +02:00
zipitz2.h PXA: ZipitZ2 support 2010-07-14 23:27:49 +02:00
ZPC1900.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ZUMA.h Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions 2010-06-23 23:24:11 +02:00
zylonite.h common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL 2009-12-08 22:14:07 +01:00