.. |
manroland
|
mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
|
2009-09-25 01:22:13 +02:00 |
A3000.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
acadia.h
|
ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia
|
2009-09-17 14:08:26 +02:00 |
actux1.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
actux2.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
actux3.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
actux4.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
ADCIOP.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
Adder.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
AdderUSB.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ADNPESC1.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
ADNPESC1_base_32.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ADS860.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
aev.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
afeb9260.h
|
AT91: factor out ROUND() macro
|
2009-07-22 09:30:31 +02:00 |
Alaska8220.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
alpr.h
|
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
|
2009-01-23 10:32:51 -06:00 |
amcc-common.h
|
amcc-common.h: Use filenames from environment variables for update procedure.
|
2009-09-10 14:38:17 +02:00 |
AmigaOneG3SE.h
|
stdio/device: rework function naming convention
|
2009-07-18 00:27:46 +02:00 |
AMX860.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ap325rxa.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
AP1000.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
APC405.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
apollon.h
|
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 21:56:15 +02:00 |
AR405.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
aria.h
|
mpc512x: Streamlined fixed_sdram() init sequence.
|
2009-09-25 00:45:30 +02:00 |
armadillo.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
ASH405.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
assabet.h
|
arm: clean cache management
|
2009-04-05 13:06:31 +02:00 |
at91cap9adk.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
at91rm9200dk.h
|
rm9200 lowevel_init: don't touch reserved/readonly registers
|
2009-08-03 09:26:26 +02:00 |
at91rm9200ek.h
|
rm9200 lowevel_init: don't touch reserved/readonly registers
|
2009-08-03 09:26:26 +02:00 |
at91sam9m10g45ek.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
at91sam9rlek.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
at91sam9260ek.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
at91sam9261ek.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
at91sam9263ek.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
atc.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
atngw100.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
atstk1002.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
atstk1003.h
|
Merge branch 'fixes' into cleanups
|
2008-12-17 16:53:07 +01:00 |
atstk1004.h
|
Merge branch 'fixes' into cleanups
|
2008-12-17 16:53:07 +01:00 |
atstk1006.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
ATUM8548.h
|
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
|
2009-08-28 17:12:37 -05:00 |
B2.h
|
arm: remove cpu_init
|
2009-06-12 20:39:52 +02:00 |
BAB7xx.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
bamboo.h
|
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
|
2009-01-23 10:32:51 -06:00 |
barco.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
BC3450.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
bf518f-ezbrd.h
|
Blackfin: fix SPI flash speed define name
|
2009-06-15 13:30:21 -04:00 |
bf526-ezbrd.h
|
Blackfin: fix SPI flash speed define name
|
2009-06-15 13:30:21 -04:00 |
bf527-ezkit.h
|
Blackfin: fix SPI flash speed define name
|
2009-06-15 13:30:21 -04:00 |
bf533-ezkit.h
|
Blackfin: bf533-ezkit: update env location
|
2009-09-30 15:15:06 -04:00 |
bf533-stamp.h
|
Blackfin: bf533-stamp: back down SCLK a bit
|
2009-07-18 21:16:01 -04:00 |
bf537-minotaur.h
|
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
|
2009-07-18 21:16:08 -04:00 |
bf537-pnav.h
|
Blackfin: fix SPI flash speed define name
|
2009-06-15 13:30:21 -04:00 |
bf537-srv1.h
|
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
|
2009-07-18 21:16:08 -04:00 |
bf537-stamp.h
|
Blackfin: bf537-stamp: comment CF-Flash Card Support better
|
2009-09-02 05:14:01 -04:00 |
bf538f-ezkit.h
|
Blackfin: fix SPI flash speed define name
|
2009-06-15 13:30:21 -04:00 |
bf548-ezkit.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
bf561-ezkit.h
|
Blackfin: unify u-boot linker scripts
|
2009-06-14 20:01:14 -04:00 |
bfin_adi_common.h
|
Blackfin: update default console= settings
|
2009-09-30 15:15:08 -04:00 |
blackstamp.h
|
Blackfin: blackstamp: update spi flash settings
|
2009-07-10 02:36:28 -04:00 |
BMW.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
bubinga.h
|
i2c: Update references to individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
c2mon.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
CANBT.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
canmb.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
canyonlands.h
|
ppc4xx: Fix "chip_config" command for AMCC Arches
|
2009-08-18 09:16:33 +02:00 |
CATcenter.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
CCM.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
cerf250.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
cm-bf527.h
|
Blackfin: cm-bf527/cm-bf537: increase flash sectors
|
2009-08-23 17:33:40 -04:00 |
cm-bf533.h
|
Blackfin: convert specific pre/post config headers to common method
|
2009-06-14 20:01:13 -04:00 |
cm-bf537e.h
|
Blackfin: cm-bf527/cm-bf537: increase flash sectors
|
2009-08-23 17:33:40 -04:00 |
cm-bf537u.h
|
Blackfin: cm-bf537u: new board port
|
2009-09-02 05:58:37 -04:00 |
cm-bf548.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
cm-bf561.h
|
Coding Style cleanup; update CHANGELOG.
|
2009-07-23 22:23:23 +02:00 |
cm41xx.h
|
ks8695: move serial driver to drivers/serial
|
2009-03-29 23:01:42 +02:00 |
cm4008.h
|
ks8695: move serial driver to drivers/serial
|
2009-03-29 23:01:42 +02:00 |
cm5200.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
cmc_pu2.h
|
rm9200 lowevel_init: don't touch reserved/readonly registers
|
2009-08-03 09:26:26 +02:00 |
cmi_mpc5xx.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
CMS700.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
cobra5272.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
cogent_common.h
|
* Patch by Shlomo Kut, 29 Mar 2004:
|
2004-09-29 11:02:56 +00:00 |
cogent_mpc8xx.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
cogent_mpc8260.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
CPC45.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
CPCI2DP.h
|
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
|
2009-01-26 10:40:42 +01:00 |
CPCI405.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
CPCI405AB.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
CPCI405DT.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
CPCI750.h
|
74xx_7xx: CPCI750: Add CPCI adapter/target support
|
2009-06-12 20:47:18 +02:00 |
CPCI4052.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
cpci5200.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
CPCIISER4.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
CPU86.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
CPU87.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
cradle.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
CRAYL1.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
csb226.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
csb272.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
csb472.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
csb637.h
|
rm9200 lowevel_init: don't touch reserved/readonly registers
|
2009-08-03 09:26:26 +02:00 |
CU824.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
DASA_SIM.h
|
ppc4xx: Update TEXT_BASE for DASA_SIM boards
|
2009-03-20 22:39:13 +01:00 |
davinci_dm355evm.h
|
dm355/pm9261: add missing CONFIG_NET_MULTI
|
2009-07-06 21:52:33 +02:00 |
davinci_dm365evm.h
|
ARM: DaVinci: Adding Support for DaVinci DM365 EVM
|
2009-09-05 13:48:43 +02:00 |
davinci_dvevm.h
|
Switched davinci_emac Ethernet driver to use newer API
|
2009-06-15 00:13:54 -07:00 |
davinci_schmoogie.h
|
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 21:56:15 +02:00 |
davinci_sffsdr.h
|
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 21:56:15 +02:00 |
davinci_sonata.h
|
Switched davinci_emac Ethernet driver to use newer API
|
2009-06-15 00:13:54 -07:00 |
DB64360.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
DB64460.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
dbau1x00.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
debris.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
delta.h
|
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
2009-07-19 00:38:23 +02:00 |
devkit8000.h
|
Add support for the DevKit8000 board
|
2009-09-05 01:33:14 +02:00 |
digsy_mtc.h
|
digsy_mtc: Add TCR register value for RTC (DS1339)
|
2009-09-24 00:21:06 +02:00 |
DK1C20.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
DK1C20_safe_32.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
DK1C20_standard_32.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
DK1S10.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
DK1S10_mtx_ldk_20.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
DK1S10_safe_32.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
DK1S10_standard_32.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
dlvision.h
|
ppc4xx: Add DL-Vision 405EP board support
|
2009-07-24 06:42:31 +02:00 |
dnp1110.h
|
arm: clean cache management
|
2009-04-05 13:06:31 +02:00 |
DP405.h
|
4xx: Remove binary cpld bitstream from DP405 board
|
2009-06-12 20:39:47 +02:00 |
DU405.h
|
i2c: Remove deprecated individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
DU440.h
|
i2c: Remove deprecated individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
EB+MCF-EV123.h
|
update the EB+MCF-EV123 board support
|
2009-07-26 13:19:23 +02:00 |
ebony.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ELPPC.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
ELPT860.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
eNET.h
|
Add PCI support to eNET board
|
2009-09-04 21:57:50 +02:00 |
EP1C20.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
EP1S10.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
EP1S40.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
ep82xxm.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
EP88x.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ep7312.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
ep8248.h
|
ep8248: add support for device tree and secondary Ethernet interface.
|
2009-09-10 23:08:48 +02:00 |
ep8260.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
ERIC.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
espt.h
|
sh: Add support ESPT-GIGA borad
|
2009-07-11 09:02:21 +09:00 |
ESTEEM192E.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ETX094.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
evb4510.h
|
arm: clean cache management
|
2009-04-05 13:06:31 +02:00 |
EVB64260.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
eXalion.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
EXBITGEN.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
FADS823.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
FADS850SAR.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
FADS860T.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
favr-32-ezkit.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
FLAGADM.h
|
8xx, icache: enabling ICache not before running from RAM
|
2009-03-18 20:48:29 +01:00 |
FPS850L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
FPS860L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
fx12mm.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
G2000.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
galaxy5200.h
|
galaxy5200: enable version environment variable
|
2009-09-24 00:23:05 +02:00 |
gcplus.h
|
arm: cleanup remaining CONFIG_INIT_CRITICAL
|
2009-06-12 20:39:48 +02:00 |
gdppc440etx.h
|
ppc4xx: Add GDsys PowerPC 440 ETX board support.
|
2009-01-26 10:13:30 +01:00 |
GEN860T.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
GENIETV.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
gr_cpci_ax2000.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
gr_ep2s60.h
|
stdio/device: rework function naming convention
|
2009-07-18 00:27:46 +02:00 |
gr_xc3s_1500.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
grsim.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
grsim_leon2.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
GTH.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
gth2.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
gw8260.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
h2_p2_dbg_board.h
|
* Code cleanup (ARM mostly)
|
2004-07-01 16:30:44 +00:00 |
hammerhead.h
|
Merge branch 'fixes' into cleanups
|
2008-12-17 16:53:07 +01:00 |
hcu4.h
|
ppc4xx: Update configs for Netstal boards
|
2008-10-21 17:34:57 +02:00 |
hcu5.h
|
ppc4xx: Update configs for Netstal boards
|
2008-10-21 17:34:57 +02:00 |
hermes.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
HH405.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
HIDDEN_DRAGON.h
|
remove _IO_BASE and KSEG1ADDR from board configuration files
|
2009-07-11 00:19:16 +02:00 |
HMI10.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
hmi1001.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
HUB405.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
hymod.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
IAD210.h
|
boards: move board_get_enetaddr() into board-specific init
|
2009-03-20 22:39:12 +01:00 |
ibf-dsp561.h
|
Blackfin: unify u-boot linker scripts
|
2009-06-14 20:01:14 -04:00 |
IceCube.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
ICU862.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
idmr.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
IDS8247.h
|
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
2009-09-22 22:59:27 +02:00 |
impa7.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
imx27lite.h
|
imx27lite: add support for imx27lite board from LogicPD
|
2009-09-01 22:10:55 +02:00 |
imx31_litekit.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
imx31_phycore.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
incaip.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
inka4x0.h
|
powerpc/inka4x0: Remove left-over ide reset code.
|
2009-05-15 21:31:24 +02:00 |
innokom.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
integratorap.h
|
integratorap/cp: use cfi driver
|
2009-06-23 00:10:04 +02:00 |
integratorcp.h
|
integratorap/cp: use cfi driver
|
2009-06-23 00:10:04 +02:00 |
intip.h
|
ppc4xx: Make DDR2 timing for intip more robust
|
2009-09-23 15:46:02 +02:00 |
IP860.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
IPHASE4539.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ISPAN.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
IVML24.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
IVMS8.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
ixdp425.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
ixdpg425.h
|
arm: timer and interrupt init rework
|
2009-06-12 20:39:48 +02:00 |
JSE.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
jupiter.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
KAREF.h
|
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
2008-11-09 21:38:04 -08:00 |
katmai.h
|
i2c: Remove deprecated individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
kb9202.h
|
at91rm9200: move serial driver to drivers/serial
|
2009-04-04 20:42:20 +02:00 |
keymile-common.h
|
Remove deprecated 'autoscr' command/variables
|
2009-09-22 23:03:24 +02:00 |
kilauea.h
|
ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
|
2009-07-28 07:23:54 +02:00 |
km8xx.h
|
powerpc: updates for the keymile boards
|
2009-07-21 00:06:11 +02:00 |
kmeter1.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
kmsupx4.h
|
8xx: add support for new keymile kmsupx4 board.
|
2009-03-18 20:50:05 +01:00 |
korat.h
|
i2c: Remove deprecated individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
KUP4K.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
KUP4X.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
kvme080.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
LANTEC.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
lart.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
linkstation.h
|
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
2009-09-22 22:59:27 +02:00 |
logodl.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
lpc2292sodimm.h
|
arm: cleanup remaining CONFIG_INIT_CRITICAL
|
2009-06-12 20:39:48 +02:00 |
lpd7a400-10.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
lpd7a400.h
|
lh7a40x: move serial driver to drivers/serial
|
2009-06-12 20:39:53 +02:00 |
lpd7a404-10.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
lpd7a404.h
|
lh7a40x: move serial driver to drivers/serial
|
2009-06-12 20:39:53 +02:00 |
luan.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
lubbock.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
lwmon.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
lwmon5.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
m501sk.h
|
rm9200 lowevel_init: don't touch reserved/readonly registers
|
2009-08-03 09:26:26 +02:00 |
M5208EVBE.h
|
ColdFire: Add M5208EVB and MCF520x CPU support
|
2009-07-14 09:27:17 -05:00 |
M5235EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M5249EVB.h
|
ColdFire: Modules header files cleanup
|
2008-11-03 09:45:58 -07:00 |
M5253DEMO.h
|
remove _IO_BASE and KSEG1ADDR from board configuration files
|
2009-07-11 00:19:16 +02:00 |
M5253EVBE.h
|
remove _IO_BASE and KSEG1ADDR from board configuration files
|
2009-07-11 00:19:16 +02:00 |
M5271EVB.h
|
Coldfire: M5271EVB: Board header update (dependencies)
|
2009-02-06 14:54:47 -07:00 |
M5272C3.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M5275EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M5282EVB.h
|
ColdFire: Modules header files cleanup
|
2008-11-03 09:45:58 -07:00 |
M5329EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M5373EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M5475EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M5485EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M52277EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M53017EVB.h
|
ColdFire: Update bootargs
|
2009-07-14 09:46:42 -05:00 |
M54451EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
M54455EVB.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
makalu.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
MBX.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
MBX860T.h
|
ppc: cleanup compiler errors/warnings
|
2009-03-27 20:23:32 +01:00 |
mcc200.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
mcu25.h
|
ppc4xx: Update configs for Netstal boards
|
2008-10-21 17:34:57 +02:00 |
mecp5123.h
|
mpc512x: Streamlined fixed_sdram() init sequence.
|
2009-09-25 00:45:30 +02:00 |
mecp5200.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
meesc.h
|
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 21:56:15 +02:00 |
METROBOX.h
|
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
2008-11-09 21:38:04 -08:00 |
mgcoge.h
|
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
2009-09-22 22:59:27 +02:00 |
mgsuvd.h
|
8xx, mgsuvd: rename board to a more generic name
|
2009-03-18 20:50:04 +01:00 |
MHPC.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
microblaze-generic.h
|
microblaze: Enable hush parser
|
2009-09-14 14:40:04 +02:00 |
MigoR.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
mimc200.h
|
Add LCD support to MIMC200 board
|
2009-07-26 13:14:33 +02:00 |
MIP405.h
|
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
2009-07-19 00:38:23 +02:00 |
ML2.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
ml300.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ml507.h
|
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
|
2008-10-31 10:31:02 +01:00 |
modnet50.h
|
netarm: move serial driver to drivers/serial
|
2009-03-29 23:01:41 +02:00 |
motionpro.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
MOUSSE.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
mp2usb.h
|
rm9200 lowevel_init: don't touch reserved/readonly registers
|
2009-08-03 09:26:26 +02:00 |
MPC86xADS.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
MPC832XEMDS.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC837XEMDS.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC837XERDB.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC885ADS.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
mpc5121ads.h
|
Add Elpida Memory Configuration to mpc5121ads Boards
|
2009-09-25 00:45:38 +02:00 |
mpc7448hpc2.h
|
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
2009-09-22 22:59:27 +02:00 |
MPC8260ADS.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
MPC8266ADS.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
MPC8313ERDB.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8315ERDB.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8323ERDB.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8349EMDS.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8349ITX.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8360EMDS.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8360ERDK.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MPC8536DS.h
|
On-chip ROM boot: MPC8536DS support
|
2009-09-30 08:42:11 -05:00 |
MPC8540ADS.h
|
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
2009-07-21 09:02:40 -05:00 |
MPC8540EVAL.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
MPC8541CDS.h
|
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
2009-07-21 09:02:40 -05:00 |
MPC8544DS.h
|
85xx: Removed BEDBUG support from FSL 85xx boards
|
2009-08-10 16:40:55 -05:00 |
MPC8548CDS.h
|
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
|
2009-08-28 17:12:37 -05:00 |
MPC8555CDS.h
|
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
2009-07-21 09:02:40 -05:00 |
MPC8560ADS.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
MPC8568MDS.h
|
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
|
2009-07-21 09:02:40 -05:00 |
MPC8569MDS.h
|
Update Freescale copyrights to remove "All Rights Reserved"
|
2009-07-29 09:59:22 +02:00 |
MPC8572DS.h
|
ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
|
2009-09-24 12:04:57 -05:00 |
MPC8610HPCD.h
|
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
|
2009-08-28 17:12:38 -05:00 |
MPC8641HPCN.h
|
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
|
2009-08-28 17:12:38 -05:00 |
mpr2.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
ms7720se.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
ms7722se.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
ms7750se.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
muas3001.h
|
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
2009-09-22 22:59:27 +02:00 |
mucmc52.h
|
mpc5200, mucmc52, uc101: config cleanup
|
2009-09-25 01:19:17 +02:00 |
munices.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
MUSENKI.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
mv88f6281gtw_ge.h
|
Marvell MV88F6281GTW_GE Board support
|
2009-07-18 20:41:42 +02:00 |
MVBC_P.h
|
Remove deprecated 'autoscr' command/variables
|
2009-09-22 23:03:24 +02:00 |
MVBLM7.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
MVBLUE.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
MVS1.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
mx1ads.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
mx1fs2.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
mx31ads.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
mx31pdk.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
NC650.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
neo.h
|
ppc4xx: Add GDSys neo 405EP board support
|
2008-10-21 17:35:02 +02:00 |
NETPHONE.h
|
Fix boards broken after removal of legacy NAND and DoC support
|
2009-07-19 19:37:24 +02:00 |
netstal-common.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
netstar.h
|
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 21:56:15 +02:00 |
NETTA.h
|
Fix boards broken after removal of legacy NAND and DoC support
|
2009-07-19 19:37:24 +02:00 |
NETTA2.h
|
Fix boards broken after removal of legacy NAND and DoC support
|
2009-07-19 19:37:24 +02:00 |
NETVIA.h
|
Fix boards broken after removal of legacy NAND and DoC support
|
2009-07-19 19:37:24 +02:00 |
nhk8815.h
|
arm nomadik: activate defrag choose 4k transfer block size
|
2009-08-25 13:35:54 -07:00 |
ns9750dev.h
|
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
|
2009-03-29 16:04:51 +02:00 |
NSCU.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
NX823.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
o2dnt.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
ocotea.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
OCRTC.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
omap3_beagle.h
|
omap3: remove typedefs for configuration structs
|
2009-08-08 11:33:23 +02:00 |
omap3_evm.h
|
omap3: remove typedefs for configuration structs
|
2009-08-08 11:33:23 +02:00 |
omap3_overo.h
|
omap3: remove typedefs for configuration structs
|
2009-08-08 11:33:23 +02:00 |
omap3_pandora.h
|
omap3: remove typedefs for configuration structs
|
2009-08-08 11:33:23 +02:00 |
omap3_zoom1.h
|
omap3: remove typedefs for configuration structs
|
2009-08-08 11:33:23 +02:00 |
omap3_zoom2.h
|
omap3: remove typedefs for configuration structs
|
2009-08-08 11:33:23 +02:00 |
omap730.h
|
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
|
2008-09-12 02:20:40 +02:00 |
omap730p2.h
|
OMAP: rename timer divisor
|
2009-03-30 18:58:41 +02:00 |
omap1510.h
|
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
|
2008-09-12 02:20:40 +02:00 |
omap1510inn.h
|
arm925t: Fix CONFIG_SYS_HZ to 1000
|
2009-04-29 21:39:46 +02:00 |
omap1610h2.h
|
OMAP: rename timer divisor
|
2009-03-30 18:58:41 +02:00 |
omap1610inn.h
|
OMAP: rename timer divisor
|
2009-03-30 18:58:41 +02:00 |
omap2420h4.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
omap5912osk.h
|
OMAP: rename timer divisor
|
2009-03-30 18:58:41 +02:00 |
ORSG.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
OXC.h
|
unify {CONFIG_,}ENV_IS_EMBEDDED
|
2009-08-25 12:57:54 +02:00 |
P1_P2_RDB.h
|
ppc/85xx: Simplify the top makefile for P1_P2_RDB boards
|
2009-09-24 12:04:58 -05:00 |
P3G4.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
p3mx.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
p3p440.h
|
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
2008-11-09 21:38:04 -08:00 |
P2020DS.h
|
ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
|
2009-09-24 12:04:57 -05:00 |
PATI.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
pb1x00.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
PCI405.h
|
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
|
2009-01-26 10:40:42 +01:00 |
PCI5441.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
PCIPPC2.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
PCIPPC6.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
pcm030.h
|
board support patch for phyCORE-MPC5200B-tiny
|
2009-07-10 23:21:32 +02:00 |
pcs440ep.h
|
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
2008-11-09 21:38:04 -08:00 |
pcu_e.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
pdnb3.h
|
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 21:56:15 +02:00 |
pf5200.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
PIP405.h
|
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
2009-07-19 00:38:23 +02:00 |
PK1C20.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
pleb2.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
PLU405.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
PM520.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
PM826.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
PM828.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
PM854.h
|
8xxx: Break out DMA code to a common file
|
2009-07-01 23:01:51 -05:00 |
PM856.h
|
8xxx: Break out DMA code to a common file
|
2009-07-01 23:01:51 -05:00 |
pm9261.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
pm9263.h
|
Update the mtd driver name in bootargs for at91-based boards
|
2009-08-18 13:51:51 +02:00 |
PMC405.h
|
ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards
|
2009-09-10 14:38:17 +02:00 |
PMC405DE.h
|
ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards
|
2009-09-10 14:38:17 +02:00 |
PMC440.h
|
ppc4xx: Add SDRAM detection for PMC440 boards
|
2009-10-02 13:56:07 +02:00 |
PN62.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
PPChameleonEVB.h
|
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
2009-07-19 00:38:23 +02:00 |
ppmc7xx.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
ppmc8260.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
purple.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
pxa255_idp.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
qemu-mips.h
|
Refresh LZMA-lib to v4.65
|
2009-07-22 09:43:27 +02:00 |
qong.h
|
serial_mx31: allow it to work with mx27 too and rename to serial_mxc
|
2009-06-21 16:18:13 +02:00 |
QS823.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
QS850.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
QS860T.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
quad100hd.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
quantum.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
r2dplus.h
|
Merge branch 'master' of /home/wd/git/u-boot/custodians
|
2009-07-13 23:37:59 +02:00 |
R360MPI.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
r7780mp.h
|
r7780mp: fix typo in Ethernet chip model number comment.
|
2009-09-10 23:11:03 +02:00 |
Rattler.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
RBC823.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
rd6281a.h
|
arm: rd6281a: Fixed NAND specific warning
|
2009-08-21 23:26:09 +02:00 |
redwood.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
rmu.h
|
rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
|
2009-06-10 00:15:11 +02:00 |
RPXClassic.h
|
boards: move board_get_enetaddr() into board-specific init
|
2009-03-20 22:39:12 +01:00 |
RPXlite.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
RPXlite_DW.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
RPXsuper.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
RRvision.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
rsdproto.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
rsk7203.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
sacsng.h
|
i2c: Update references to individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
Sandpoint8240.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
Sandpoint8245.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
sbc35_a9g20.h
|
Add support for the Calao SBC35-A9G20 board
|
2009-09-01 22:13:37 +02:00 |
sbc405.h
|
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
|
2009-06-12 20:39:47 +02:00 |
sbc2410x.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
sbc8240.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
sbc8260.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
sbc8349.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
SBC8540.h
|
sbc85x0: tidy up Makefile to use new configuration script.
|
2009-09-24 12:05:00 -05:00 |
sbc8548.h
|
sbc8548: reclaim wasted sector in boot flash
|
2009-09-30 08:29:47 -05:00 |
sbc8560.h
|
sbc85x0: tidy up Makefile to use new configuration script.
|
2009-09-24 12:05:00 -05:00 |
sbc8641d.h
|
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
|
2009-08-28 17:12:38 -05:00 |
sc3.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
sc520_cdp.h
|
Misc sc520 cdp fixups
|
2009-09-04 21:55:57 +02:00 |
sc520_spunk.h
|
Fixup sc520_spunk board
|
2009-09-04 21:55:17 +02:00 |
sc520_spunk_rel.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
scb9328.h
|
Convert DM9000 driver for CONFIG_NET_MULTI
|
2009-06-15 00:13:55 -07:00 |
SCM.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
sequoia.h
|
ppc4xx: Add Sequoia RAM-booting target
|
2009-06-12 20:39:47 +02:00 |
sh7763rdp.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
sh7785lcr.h
|
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
|
2009-07-08 11:43:16 +09:00 |
shannon.h
|
arm: clean cache management
|
2009-04-05 13:06:31 +02:00 |
sheevaplug.h
|
arm: Sheevaplug: Fixed NAND specific warning
|
2009-08-09 23:44:52 +02:00 |
SIMPC8313.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
SL8245.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
SM850.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
smdk2400.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
smdk2410.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
smdk6400.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
smmaco4.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
SMN42.h
|
arm: cleanup remaining CONFIG_INIT_CRITICAL
|
2009-06-12 20:39:48 +02:00 |
socrates.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
sorcery.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
spc1920.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
SPD823TS.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
spieval.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
stxgp3.h
|
ppc: Clean up calling of phy_reset() during init
|
2009-09-22 23:05:29 +02:00 |
stxssa.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
stxxtc.h
|
FDT: remove obsolete OF_CPU and OF_SOC macros.
|
2009-09-22 22:59:27 +02:00 |
svm_sc8xx.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
SX1.h
|
arm925t: Fix CONFIG_SYS_HZ to 1000
|
2009-04-29 21:39:46 +02:00 |
SXNI855T.h
|
Remove legacy NAND and disk on chip references from boards.
|
2009-07-17 15:03:28 -05:00 |
taihu.h
|
i2c: Update references to individual i2c commands
|
2009-06-12 20:39:46 +02:00 |
taishan.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
TASREG.h
|
ColdFire: Modules header files cleanup
|
2008-11-03 09:45:58 -07:00 |
tb0229.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
TB5200.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
tcm-bf537.h
|
Blackfin: unify u-boot linker scripts
|
2009-06-14 20:01:14 -04:00 |
TK885D.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
tny_a9260.h
|
Support for the Calao TNY-A9260/TNY-A9G20 boards
|
2009-09-01 22:35:58 +02:00 |
TOP860.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
TOP5200.h
|
net: removed board-specific CONFIGs from MPC5xxx FEC driver
|
2009-02-09 23:01:40 -08:00 |
Total5200.h
|
mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
|
2009-03-18 20:54:56 +01:00 |
TQM85xx.h
|
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
2009-07-19 00:38:23 +02:00 |
TQM823L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM823M.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM834x.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
TQM850L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM850M.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM855L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM855M.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM860L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM860M.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM862L.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM862M.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM866M.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM885D.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
TQM5200.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
TQM8260.h
|
TQM8260: fix locations of kernel and ramdisk images in flash
|
2009-02-17 10:26:38 +01:00 |
TQM8272.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
trab.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
trizepsiv.h
|
xscale: add support for the polaris board
|
2009-07-06 21:52:58 +02:00 |
uc100.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
uc101.h
|
mpc5200, mucmc52, uc101: config cleanup
|
2009-09-25 01:19:17 +02:00 |
utx8245.h
|
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
|
2009-02-18 00:47:43 +01:00 |
v5fx30teval.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
v37.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
v38b.h
|
boards: move board_get_enetaddr() into board-specific init
|
2009-03-20 22:39:12 +01:00 |
VCMA9.h
|
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
|
2009-08-25 13:35:54 -07:00 |
vct.h
|
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
|
2009-07-22 22:53:44 -07:00 |
versatile.h
|
versatile: update config and merge to cfi flash driver
|
2009-07-12 21:59:52 +02:00 |
virtlab2.h
|
TQM8xx* boards: set larger SMC Rx buffer len
|
2009-07-28 22:39:04 +02:00 |
vme8349.h
|
mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
|
2009-09-26 21:19:38 -05:00 |
VOH405.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
voiceblue.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
VOM405.h
|
4xx: Remove binary cpld bitstream from VOM405 board
|
2009-06-12 20:39:46 +02:00 |
VoVPN-GW.h
|
Add "source" command; prepare removal of "autoscr" command
|
2009-04-03 22:01:42 +02:00 |
W7OLMC.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
W7OLMG.h
|
ppc: Clean up calling of misc_init_r() during init
|
2009-09-22 23:04:44 +02:00 |
walnut.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
wepep250.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
WUH405.h
|
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
|
2009-07-18 15:32:10 +02:00 |
xaeniax.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
xilinx-ppc.h
|
mtd: MTD related config header changes (mtdparts command)
|
2009-06-12 20:45:47 +02:00 |
xilinx-ppc405-generic.h
|
ppc4xx: Generic architecture for xilinx ppc405(v3)
|
2008-10-24 17:26:09 +02:00 |
xilinx-ppc405.h
|
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
|
2008-10-31 10:31:02 +01:00 |
xilinx-ppc440-generic.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
xilinx-ppc440.h
|
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
|
2008-10-31 10:31:02 +01:00 |
xm250.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
XPEDITE1000.h
|
xpedite1k: Move to X-ES vendor directory
|
2009-07-24 06:42:32 +02:00 |
XPEDITE5170.h
|
ppc/85xx: Fix LCRR_CLKDIV defines
|
2009-09-24 12:04:57 -05:00 |
XPEDITE5200.h
|
ppc/85xx: Fix LCRR_CLKDIV defines
|
2009-09-24 12:04:57 -05:00 |
XPEDITE5370.h
|
ppc/85xx: Fix LCRR_CLKDIV defines
|
2009-09-24 12:04:57 -05:00 |
xsengine.h
|
pxa: move serial driver to drivers/serial
|
2009-06-12 20:39:52 +02:00 |
yosemite.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
yucca.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
Yukon8220.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
zeus.h
|
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
|
2008-11-09 21:38:04 -08:00 |
ZPC1900.h
|
rename CFG_ macros to CONFIG_SYS
|
2008-10-18 21:54:03 +02:00 |
ZUMA.h
|
Separate mtdparts command from jffs2
|
2009-03-20 22:39:14 +01:00 |
zylonite.h
|
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
|
2009-07-19 00:38:23 +02:00 |