Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs
History
Stefan Roese 916ed9444d ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z) 
This patch fixes a problem only seen very occasionally on Canyonlands.
The NOR flash interface (CFI driver) doesn't work reliably in all cases.
Erasing and/or programming sometimes doesn't work. Sometimes with
an error message, like "flash not erased" when trying to program an
area that should have just been erased. And sometimes without any error
messages. As mentioned above, this problem was only seen rarely and with
some PLL configuration (CPU speed, EBC speed).

Now I spotted this problem a few times, when running my Canyonlands with
the following setup (chip_config):

1000-nor         - NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100

Changing the EBC configuration to not release the bus into high
impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1
in EBC0_CFG) seems to fix this problem. I haven't seen any failure
anymore with this patch applied.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: David Mitchell <dmitchell@amcc.com>
Cc: Jeff Mann <MannJ@embeddedplanet.com>
2009-11-09 13:30:19 +01:00
..
manroland mucmc52, uc101: delete ata@3a00 node, if no CF card is detected 2009-09-25 01:22:13 +02:00
A3000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
acadia.h ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia 2009-09-17 14:08:26 +02:00
actux1.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux2.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux3.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
actux4.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ADCIOP.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Adder.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADNPESC1.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ADNPESC1_base_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADS860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
aev.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
afeb9260.h AT91: factor out ROUND() macro 2009-07-22 09:30:31 +02:00
Alaska8220.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
alpr.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
amcc-common.h ppc4xx: Update flash size in reg property of the NOR flash node 2009-10-23 15:56:32 +02:00
AmigaOneG3SE.h stdio/device: rework function naming convention 2009-07-18 00:27:46 +02:00
AMX860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ap325rxa.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
AP1000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
APC405.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
apollon.h NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 21:56:15 +02:00
AR405.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
aria.h mpc512x: Streamlined fixed_sdram() init sequence. 2009-09-25 00:45:30 +02:00
armadillo.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ASH405.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
assabet.h arm: clean cache management 2009-04-05 13:06:31 +02:00
at91cap9adk.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
at91rm9200dk.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
at91rm9200ek.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
at91sam9m10g45ek.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
at91sam9rlek.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
at91sam9260ek.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
at91sam9261ek.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
at91sam9263ek.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
atc.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atngw100.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1002.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
atstk1003.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1004.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1006.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
ATUM8548.h 85xx: Remove unused CONFIG_CLEAR_LAW0 defines 2009-08-28 17:12:37 -05:00
B2.h arm: remove cpu_init 2009-06-12 20:39:52 +02:00
BAB7xx.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
bamboo.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
barco.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
BC3450.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
bf518f-ezbrd.h Blackfin: fix SPI flash speed define name 2009-06-15 13:30:21 -04:00
bf526-ezbrd.h Blackfin: fix SPI flash speed define name 2009-06-15 13:30:21 -04:00
bf527-ezkit.h Blackfin: fix SPI flash speed define name 2009-06-15 13:30:21 -04:00
bf533-ezkit.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
bf533-stamp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
bf537-minotaur.h Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR 2009-07-18 21:16:08 -04:00
bf537-pnav.h Blackfin: fix SPI flash speed define name 2009-06-15 13:30:21 -04:00
bf537-srv1.h Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR 2009-07-18 21:16:08 -04:00
bf537-stamp.h Blackfin: bf537-stamp: comment CF-Flash Card Support better 2009-09-02 05:14:01 -04:00
bf538f-ezkit.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
bf548-ezkit.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
bf561-ezkit.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
bfin_adi_common.h Blackfin: update default console= settings 2009-09-30 15:15:08 -04:00
blackstamp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
BMW.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
bubinga.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
c2mon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CANBT.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
canmb.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
canyonlands.h ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z) 2009-11-09 13:30:19 +01:00
CATcenter.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CCM.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
cerf250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm-bf527.h Blackfin: cm-bf527/cm-bf537: increase flash sectors 2009-08-23 17:33:40 -04:00
cm-bf533.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm-bf537e.h Blackfin: cm-bf527/cm-bf537: increase flash sectors 2009-08-23 17:33:40 -04:00
cm-bf537u.h Blackfin: cm-bf537u: new board port 2009-09-02 05:58:37 -04:00
cm-bf548.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
cm-bf561.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
cm41xx.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm4008.h ks8695: move serial driver to drivers/serial 2009-03-29 23:01:42 +02:00
cm5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
cmc_pu2.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
cmi_mpc5xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
CMS700.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
cobra5272.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cogent_mpc8260.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPC45.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPCI2DP.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
CPCI405.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPCI405AB.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPCI405DT.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
CPCI750.h 74xx_7xx: CPCI750: Add CPCI adapter/target support 2009-06-12 20:47:18 +02:00
CPCI4052.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
cpci5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
CPCIISER4.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
CPU86.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
CPU87.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
cpu9260.h AT91 CPU9260 CPU9G20 Fix compile warnings 2009-10-18 16:39:01 -05:00
cpuat91.h AT91 CPUAT91 Fix compiler warning 2009-10-18 16:40:15 -05:00
cradle.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
CRAYL1.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
csb226.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
csb272.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
csb472.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
csb637.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
CU824.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DASA_SIM.h ppc4xx: Update TEXT_BASE for DASA_SIM boards 2009-03-20 22:39:13 +01:00
davinci_dm355evm.h TI DaVinci DM355: Add Config option for 64 bit Support 2009-10-18 16:52:53 -05:00
davinci_dm355leopard.h TI: DaVinci: DM355 Leopard board support 2009-10-18 16:42:21 -05:00
davinci_dm365evm.h TI DaVinci: Adding Copyright for DM365 EVM 2009-10-24 09:55:24 -05:00
davinci_dm6467evm.h Coding Style cleanup; update CHANGELOG, prepare -rc1 2009-10-28 00:49:47 +01:00
davinci_dvevm.h TI DaVinci DVEVM: Add Config option for 64 bit Support 2009-10-18 16:52:53 -05:00
davinci_schmoogie.h TI DaVinci: Remove references to SZ_xx 2009-10-13 06:17:33 -05:00
davinci_sffsdr.h TI DaVinci: Remove references to SZ_xx 2009-10-13 06:17:33 -05:00
davinci_sonata.h TI DaVinci Sonata: Add Config option for 64 bit Support 2009-10-18 16:52:53 -05:00
DB64360.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DB64460.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
dbau1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
debris.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
delta.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
devkit8000.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
digsy_mtc.h digsy_mtc: Add TCR register value for RTC (DS1339) 2009-09-24 00:21:06 +02:00
DK1C20.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
DK1C20_safe_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1C20_standard_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
DK1S10_mtx_ldk_20.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10_safe_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10_standard_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
dlvision.h ppc4xx: Add DL-Vision 405EP board support 2009-07-24 06:42:31 +02:00
dnp1110.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
DP405.h 4xx: Remove binary cpld bitstream from DP405 board 2009-06-12 20:39:47 +02:00
DU405.h i2c: Remove deprecated individual i2c commands 2009-06-12 20:39:46 +02:00
DU440.h i2c: Remove deprecated individual i2c commands 2009-06-12 20:39:46 +02:00
EB+MCF-EV123.h update the EB+MCF-EV123 board support 2009-07-26 13:19:23 +02:00
ebony.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ELPPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ELPT860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
eNET.h Add PCI support to eNET board 2009-09-04 21:57:50 +02:00
EP1C20.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
EP1S10.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
EP1S40.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ep82xxm.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
EP88x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep7312.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
ep8248.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ep8260.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ERIC.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
espt.h sh: Add support ESPT-GIGA borad 2009-07-11 09:02:21 +09:00
ESTEEM192E.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ETX094.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
evb4510.h arm: clean cache management 2009-04-05 13:06:31 +02:00
EVB64260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
eXalion.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EXBITGEN.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
FADS823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS850SAR.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
favr-32-ezkit.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
FLAGADM.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
FPS850L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
FPS860L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
fx12mm.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
G2000.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
galaxy5200.h galaxy5200: Add default environment variables 2009-10-28 21:46:21 +01:00
gcplus.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
gdppc440etx.h ppc4xx: Add GDsys PowerPC 440 ETX board support. 2009-01-26 10:13:30 +01:00
GEN860T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
GENIETV.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_ep2s60.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
grsim_leon2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
GTH.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gth2.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
gw8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hammerhead.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
hcu4.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hcu5.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hermes.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HH405.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
HIDDEN_DRAGON.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
HMI10.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
hmi1001.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
HUB405.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
hymod.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IAD210.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
ibf-dsp561.h Blackfin: unify u-boot linker scripts 2009-06-14 20:01:14 -04:00
IceCube.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
ICU862.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
idmr.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
IDS8247.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
impa7.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
imx27lite.h imx27lite: add support for imx27lite board from LogicPD 2009-09-01 22:10:55 +02:00
imx31_litekit.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
imx31_phycore.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
incaip.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
inka4x0.h ppc: Remove board-specific command table relocation fixups 2009-10-03 10:17:56 +02:00
innokom.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
integratorap.h integratorap/cp: use cfi driver 2009-06-23 00:10:04 +02:00
integratorcp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
intip.h ppc4xx: Make DDR2 timing for intip more robust 2009-09-23 15:46:02 +02:00
IP860.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
IPHASE4539.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ISPAN.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
IVML24.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
IVMS8.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
ixdp425.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
ixdpg425.h arm: timer and interrupt init rework 2009-06-12 20:39:48 +02:00
JSE.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
jupiter.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
KAREF.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
katmai.h i2c: Remove deprecated individual i2c commands 2009-06-12 20:39:46 +02:00
kb9202.h at91rm9200: move serial driver to drivers/serial 2009-04-04 20:42:20 +02:00
keymile-common.h Remove deprecated 'autoscr' command/variables 2009-09-22 23:03:24 +02:00
kilauea.h ppc4xx: Kilauea: Fix SDRAM init in NAND booting version 2009-07-28 07:23:54 +02:00
km8xx.h powerpc: updates for the keymile boards 2009-07-21 00:06:11 +02:00
kmeter1.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
kmsupx4.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
korat.h i2c: Remove deprecated individual i2c commands 2009-06-12 20:39:46 +02:00
KUP4K.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
KUP4X.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
kvme080.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
LANTEC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
lart.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
linkstation.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
logodl.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpc2292sodimm.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
lpd7a400-10.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpd7a400.h lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
lpd7a404-10.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
lpd7a404.h lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
luan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lubbock.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
lwmon.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
lwmon5.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
m501sk.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
M5208EVBE.h ColdFire: Add M5208EVB and MCF520x CPU support 2009-07-14 09:27:17 -05:00
M5235EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5249EVB.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
M5253DEMO.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
M5253EVBE.h remove _IO_BASE and KSEG1ADDR from board configuration files 2009-07-11 00:19:16 +02:00
M5271EVB.h Coldfire: M5271EVB: Board header update (dependencies) 2009-02-06 14:54:47 -07:00
M5272C3.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5275EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5282EVB.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
M5329EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5373EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5475EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M5485EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M52277EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M53017EVB.h ColdFire: Update bootargs 2009-07-14 09:46:42 -05:00
M54451EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
M54455EVB.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
makalu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX860T.h ppc: cleanup compiler errors/warnings 2009-03-27 20:23:32 +01:00
mcc200.h mcc200: fix build error 2009-10-19 09:18:57 +02:00
mcu25.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
mecp5123.h mpc512x: Streamlined fixed_sdram() init sequence. 2009-09-25 00:45:30 +02:00
mecp5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
meesc.h at91: Update MEESC board support 2009-10-13 06:17:38 -05:00
METROBOX.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
mgcoge.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
mgsuvd.h 8xx, mgsuvd: rename board to a more generic name 2009-03-18 20:50:04 +01:00
MHPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
microblaze-generic.h microblaze: Enable hush parser 2009-09-14 14:40:04 +02:00
MigoR.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
mimc200.h Add LCD support to MIMC200 board 2009-07-26 13:14:33 +02:00
MIP405.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
ML2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ml300.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
modnet50.h netarm: move serial driver to drivers/serial 2009-03-29 23:01:41 +02:00
motionpro.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
MOUSSE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mp2usb.h rm9200 lowevel_init: don't touch reserved/readonly registers 2009-08-03 09:26:26 +02:00
MPC86xADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC832XEMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC837XEMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC837XERDB.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC885ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5121ads.h Add Elpida Memory Configuration to mpc5121ads Boards 2009-09-25 00:45:38 +02:00
mpc7448hpc2.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
MPC8260ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8266ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8313ERDB.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8315ERDB.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8323ERDB.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8349EMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8349ITX.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8360EMDS.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8360ERDK.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MPC8536DS.h On-chip ROM boot: MPC8536DS support 2009-09-30 08:42:11 -05:00
MPC8540ADS.h 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards 2009-07-21 09:02:40 -05:00
MPC8540EVAL.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8541CDS.h 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards 2009-07-21 09:02:40 -05:00
MPC8544DS.h 85xx: Removed BEDBUG support from FSL 85xx boards 2009-08-10 16:40:55 -05:00
MPC8548CDS.h 85xx: Remove unused CONFIG_CLEAR_LAW0 defines 2009-08-28 17:12:37 -05:00
MPC8555CDS.h 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards 2009-07-21 09:02:40 -05:00
MPC8560ADS.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
MPC8568MDS.h 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards 2009-07-21 09:02:40 -05:00
MPC8569MDS.h mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards 2009-10-27 09:44:32 -05:00
MPC8572DS.h ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS 2009-09-24 12:04:57 -05:00
MPC8610HPCD.h mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define 2009-10-16 10:21:39 -05:00
MPC8641HPCN.h mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define 2009-10-16 10:21:39 -05:00
mpr2.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7720se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
ms7722se.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ms7750se.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
muas3001.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
mucmc52.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
munices.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
MUSENKI.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h Marvell MV88F6281GTW_GE Board support 2009-07-18 20:41:42 +02:00
MVBC_P.h Remove deprecated 'autoscr' command/variables 2009-09-22 23:03:24 +02:00
MVBLM7.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
MVBLUE.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MVS1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
mx1ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx1fs2.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
mx31ads.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
mx31pdk.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
NC650.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
neo.h ppc4xx: Add GDSys neo 405EP board support 2008-10-21 17:35:02 +02:00
NETPHONE.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
netstal-common.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
netstar.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
NETTA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETTA2.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
NETVIA.h Fix boards broken after removal of legacy NAND and DoC support 2009-07-19 19:37:24 +02:00
nhk8815.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
ns9750dev.h Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2009-03-29 16:04:51 +02:00
NSCU.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
NX823.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
o2dnt.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
ocotea.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
OCRTC.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
omap3_beagle.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
omap3_evm.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
omap3_overo.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
omap3_pandora.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
omap3_sdp3430.h TI OMAP3 SDP3430: Initial Support 2009-10-24 09:55:25 -05:00
omap3_zoom1.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
omap3_zoom2.h TI: OMAP3: Remove SZ_xx references 2009-10-18 16:52:52 -05:00
omap730.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap730p2.h OMAP: rename timer divisor 2009-03-30 18:58:41 +02:00
omap1510.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap1510inn.h arm925t: Fix CONFIG_SYS_HZ to 1000 2009-04-29 21:39:46 +02:00
omap1610h2.h OMAP: rename timer divisor 2009-03-30 18:58:41 +02:00
omap1610inn.h OMAP: rename timer divisor 2009-03-30 18:58:41 +02:00
omap2420h4.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
omap5912osk.h OMAP: rename timer divisor 2009-03-30 18:58:41 +02:00
openrd_base.h Support for the OpenRD base board 2009-10-13 06:17:36 -05:00
ORSG.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
OXC.h unify {CONFIG_,}ENV_IS_EMBEDDED 2009-08-25 12:57:54 +02:00
P1_P2_RDB.h Coding Style cleanup; update CHANGELOG, prepare -rc1 2009-10-28 00:49:47 +01:00
P3G4.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
p3mx.h p3mx: Remove serial relocation fixups 2009-10-03 10:17:57 +02:00
p3p440.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
P2020DS.h ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS 2009-09-24 12:04:57 -05:00
PATI.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
pb1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCI405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
PCI5441.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCIPPC2.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PCIPPC6.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
pcm030.h board support patch for phyCORE-MPC5200B-tiny 2009-07-10 23:21:32 +02:00
pcs440ep.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
pcu_e.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
pdnb3.h NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 21:56:15 +02:00
pf5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
PIP405.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
PK1C20.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
pleb2.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
PLU405.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
PM520.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM826.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM828.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
PM854.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
PM856.h 8xxx: Break out DMA code to a common file 2009-07-01 23:01:51 -05:00
pm9261.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
pm9263.h Update the mtd driver name in bootargs for at91-based boards 2009-08-18 13:51:51 +02:00
PMC405.h ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards 2009-09-10 14:38:17 +02:00
PMC405DE.h ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards 2009-09-10 14:38:17 +02:00
PMC440.h ppc4xx: Add SDRAM detection for PMC440 boards 2009-10-02 13:56:07 +02:00
PN62.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
PPChameleonEVB.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
ppmc7xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ppmc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
purple.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
pxa255_idp.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
qemu-mips.h Refresh LZMA-lib to v4.65 2009-07-22 09:43:27 +02:00
qong.h serial_mx31: allow it to work with mx27 too and rename to serial_mxc 2009-06-21 16:18:13 +02:00
QS823.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS850.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
quad100hd.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
quantum.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
r2dplus.h Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:37:59 +02:00
R360MPI.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
r7780mp.h r7780mp: fix typo in Ethernet chip model number comment. 2009-09-10 23:11:03 +02:00
Rattler.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
RBC823.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
rd6281a.h arm: rd6281a: Fixed NAND specific warning 2009-08-21 23:26:09 +02:00
redwood.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rmu.h rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared 2009-06-10 00:15:11 +02:00
RPXClassic.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
RPXlite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXlite_DW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXsuper.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
RRvision.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsdproto.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsk7203.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
sacsng.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
Sandpoint8240.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Sandpoint8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc35_a9g20.h Fix Compliation warning for SBC35-A9G20 board 2009-10-28 21:47:07 +01:00
sbc405.h Enable CONFIG_NET_MULTI on all remaining PPC4xx boards 2009-06-12 20:39:47 +02:00
sbc2410x.h CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards 2009-10-13 21:13:55 -05:00
sbc8240.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8260.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8349.h sbc8349: fix incorrect comment 2009-10-28 22:07:56 +01:00
SBC8540.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8548.h sbc8548: reclaim wasted sector in boot flash 2009-09-30 08:29:47 -05:00
sbc8560.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
sbc8641d.h mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define 2009-10-16 10:21:39 -05:00
sc3.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
sc520_cdp.h Misc sc520 cdp fixups 2009-09-04 21:55:57 +02:00
sc520_spunk.h Fixup sc520_spunk board 2009-09-04 21:55:17 +02:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h Convert DM9000 driver for CONFIG_NET_MULTI 2009-06-15 00:13:55 -07:00
SCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sequoia.h ppc4xx: Sequoia: Add chip_config command 2009-10-23 16:05:11 +02:00
sh7763rdp.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
sh7785lcr.h sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV 2009-07-08 11:43:16 +09:00
shannon.h arm: clean cache management 2009-04-05 13:06:31 +02:00
sheevaplug.h arm: Sheevaplug: Fixed NAND specific warning 2009-08-09 23:44:52 +02:00
SIMPC8313.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
SL8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SM850.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
smdk2400.h CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards 2009-10-13 21:13:55 -05:00
smdk2410.h CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards 2009-10-13 21:13:55 -05:00
smdk6400.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
smdkc100.h s5pc1xx: add support SMDKC100 board 2009-10-13 21:13:55 -05:00
smmaco4.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
SMN42.h arm: cleanup remaining CONFIG_INIT_CRITICAL 2009-06-12 20:39:48 +02:00
socrates.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
sorcery.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spc1920.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SPD823TS.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
spieval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
stxgp3.h ppc: Clean up calling of phy_reset() during init 2009-09-22 23:05:29 +02:00
stxssa.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
stxxtc.h FDT: remove obsolete OF_CPU and OF_SOC macros. 2009-09-22 22:59:27 +02:00
svm_sc8xx.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
SX1.h arm925t: Fix CONFIG_SYS_HZ to 1000 2009-04-29 21:39:46 +02:00
SXNI855T.h Remove legacy NAND and disk on chip references from boards. 2009-07-17 15:03:28 -05:00
taihu.h i2c: Update references to individual i2c commands 2009-06-12 20:39:46 +02:00
taishan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TASREG.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
tb0229.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TB5200.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
tcm-bf537.h Blackfin: unify u-boot linker scripts 2009-06-14 20:01:14 -04:00
TK885D.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
tny_a9260.h Fix Compliation warning for TNY-A9260 and TNY-A9G20 2009-10-28 21:47:08 +01:00
TOP860.h Add "source" command; prepare removal of "autoscr" command 2009-04-03 22:01:42 +02:00
TOP5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
Total5200.h mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c 2009-03-18 20:54:56 +01:00
TQM85xx.h Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
TQM823L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM823M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM834x.h mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields 2009-09-26 21:19:38 -05:00
TQM850L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM850M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM855L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM855M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM860L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM860M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM862L.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM862M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM866M.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM885D.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
TQM5200.h tqm5200: Correct comment and code in post_hotkeys_pressed. 2009-10-08 00:31:23 +02:00
TQM8260.h TQM8260: fix locations of kernel and ramdisk images in flash 2009-02-17 10:26:38 +01:00
TQM8272.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
trab.h CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards 2009-10-13 21:13:55 -05:00
trizepsiv.h xscale: add support for the polaris board 2009-07-06 21:52:58 +02:00
uc100.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
uc101.h mpc5200, mucmc52, uc101: config cleanup 2009-09-25 01:19:17 +02:00
utx8245.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
v38b.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
VCMA9.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
vct.h Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API 2009-07-22 22:53:44 -07:00
versatile.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
virtlab2.h TQM8xx* boards: set larger SMC Rx buffer len 2009-07-28 22:39:04 +02:00
vme8349.h mpc83xx: cosmetic comment update relating to SPD EEPROM 2009-10-09 14:09:15 -05:00
VOH405.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
voiceblue.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
VOM405.h 4xx: Remove binary cpld bitstream from VOM405 board 2009-06-12 20:39:46 +02:00
VoVPN-GW.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
W7OLMC.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
W7OLMG.h ppc: Clean up calling of misc_init_r() during init 2009-09-22 23:04:44 +02:00
walnut.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
wepep250.h pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
WUH405.h NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... 2009-07-18 15:32:10 +02:00
xaeniax.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
xilinx-ppc.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xm250.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
XPEDITE1000.h xpedite1k: Move to X-ES vendor directory 2009-07-24 06:42:32 +02:00
XPEDITE5170.h ppc: Enable full relocation to RAM 2009-10-03 10:15:45 +02:00
XPEDITE5200.h ppc: Enable full relocation to RAM 2009-10-03 10:15:45 +02:00
XPEDITE5370.h xpedite5370: Enable multi-core support 2009-10-27 09:34:58 -05:00
xsengine.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00
yosemite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
yucca.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Yukon8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
zeus.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
ZPC1900.h Update all board to support new bbmiiphy driver (with multibus support) 2009-10-10 23:16:55 -07:00
ZUMA.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
zylonite.h Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API 2009-10-04 22:37:03 -07:00