u-boot/include/configs
Stefan Roese 2bae75a488 arm: mvebu: Add Armada A38x DB-88F6820-GP board support
This patch adds support for the Marvell DB-88F6820-GP Armada A38x
evaluation board.

Supported peripherals are:
- UART
- Ethernet (mvneta)
- I2C
- SPI (including SPI NOR flash)

Please note that this board support right now only supports the
main U-Boot. Without the bin_hdr integration (DDR training etc). This
will be added in a few days / weeks to complete this board port. But
till then this U-Boot version can be run on the target via the
original Marvell U-Boot via this command:

tftpboot 4000000 db-88f6820-gp/u-boot.bin;go 4000000

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05 14:32:05 +02:00
..
km nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
manroland powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
a3m071.h powerpc: a3m071: remove redundant CONFIG_SPL_* defines 2014-12-08 09:35:43 -05:00
a4m072.h powerpc: mpc52xx: a4m072: Convert to generic board 2014-11-19 13:07:21 +01:00
ac14xx.h powerpc: ac14xx: convert to generic board 2014-10-27 14:35:54 +01:00
acadia.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
adp-ag101.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
adp-ag101p.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
adp-ag102.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
afeb9260.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
alpr.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
alt.h arm: rmobile: alt: Add support SDHI 2015-02-25 13:13:38 +09:00
am43xx_evm.h include: configs: Enable DWC3 and DFU in AM43xx 2015-04-14 05:48:11 +02:00
am335x_evm.h am335x_evm_usbspl: Remove other SPL modes 2015-03-13 09:26:45 -04:00
am335x_igep0033.h AM335x: igep0033: Convert to generic board and use ti_am335x_common.h. 2014-09-04 13:06:00 -04:00
am3517_crane.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
am3517_evm.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
amcc-common.h powerpc: ppc4xx: convert AMCC boards to generic board 2015-03-28 12:09:46 -04:00
amcore.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
ap325rxa.h
ap_sh4a_4a.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
apalis_t30.h apalis/colibri_t30: add misc cmds increase buf sizes and max args 2015-03-04 10:09:02 -07:00
apf27.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
apx4devkit.h
arcangel4.h arc: move SYS_MONITOR_BASE setup in Konfig 2015-02-09 16:41:20 +03:00
aria.h powerpc: aria: convert to generic board 2014-10-27 14:35:54 +01:00
aristainetos.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
armadillo-800eva.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
arndale.h arndale: config: disable max77686 support 2015-01-29 17:09:59 -07:00
aspenite.h arm: aspenite: convert to generic board 2015-03-05 22:08:59 +01:00
astro_mcf5373l.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
at91-sama5_common.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
at91rm9200ek.h ARM: at91 series: convert to generic board 2014-11-17 08:47:15 -05:00
at91sam9m10g45ek.h ARM: atmel: at91sam9m10g45ek: enable spl support 2015-04-01 01:04:30 +02:00
at91sam9n12ek.h ARM: atmel: at91sam9n12ek: enable spl support 2015-04-01 01:04:31 +02:00
at91sam9rlek.h ARM: at91: at91sam9rlek: add mmc environment configuration 2015-03-18 23:36:02 +01:00
at91sam9x5ek.h ARM: atmel: at91sam9x5ek: enable spl support 2015-04-01 01:04:31 +02:00
at91sam9260ek.h ARM: at91: mmc portA support is only for at91sam9g20ek_2mmc board 2015-02-07 23:42:58 +01:00
at91sam9261ek.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
at91sam9263ek.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
atngw100.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
atngw100mkii.h atngwmkii: convert to generic board 2015-03-02 08:49:48 -05:00
atstk1002.h atstk1002: enable generic board 2015-02-17 22:54:41 +01:00
atstk1003.h avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk 2014-01-24 16:59:07 -05:00
atstk1004.h avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk 2014-01-24 16:59:07 -05:00
atstk1006.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
axs101.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
B4860QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
balloon3.h pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere 2015-03-02 10:59:50 +01:00
bamboo.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
bav335x.h Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
bcm28155_ap.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
bcm_ep_board.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
bct-brettl2.h bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards 2015-01-16 13:31:35 +08:00
beagle_x15.h beagle_x15: increase phy autoneg timeout 2015-03-13 09:29:36 -04:00
beaver.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
bf506f-ezkit.h kconfig: move CONFIG_CMD_IMPORTENV to Kconfig 2014-09-24 18:30:29 -04:00
bf518f-ezbrd.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf525-ucr2.h
bf526-ezbrd.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf527-ad7160-eval.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf527-ezkit.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf527-sdp.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf533-ezkit.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf533-stamp.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf537-minotaur.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf537-pnav.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf537-srv1.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf537-stamp.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf538f-ezkit.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf548-ezkit.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bf561-acvilon.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf561-ezkit.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
bf609-ezkit.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
bfin_adi_common.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
bg0900.h
blackstamp.h
blackvme.h
br4.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
BSC9131RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
BSC9132QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
bubinga.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
bur_am335x_common.h board/BuR/common: use SYS_CONSOLE_OVERWRITE 2015-03-17 10:55:07 -04:00
C29XPCIE.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
calimain.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
cam_enc_4xx.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
canmb.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
canyonlands.h powerpc: ppc4xx: convert AMCC boards to generic board 2015-03-28 12:09:46 -04:00
cardhu.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
cgtqmx6eval.h cgtqmx6eval: Set default environment to use zImage 2014-02-11 11:04:40 +01:00
charon.h
chromebook_link.h x86: Move common Chromebook config into a separate file 2015-04-16 19:27:40 -06:00
chromebox_panther.h x86: Add support for panther (Asus Chromebox) 2015-04-16 19:27:40 -06:00
cm-bf527.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf533.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
cm-bf537e.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf537u.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf548.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
cm-bf561.h kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig 2014-09-24 18:30:28 -04:00
cm5200.h powerpc/cm5200: migrate to generic board 2015-01-05 16:40:18 -05:00
cm_fx6.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
cm_t35.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
cm_t54.h omap5: cm-t54: add sata support 2015-01-05 15:13:47 -05:00
cm_t335.h compulab: eeprom: add support for defining eeprom i2c bus 2014-09-09 15:32:32 +02:00
cm_t3517.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
cmi_mpc5xx.h
cobra5272.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
colibri_pxa270.h pxa: colibri_pxa270: integrate latest validated register settings 2015-03-02 10:59:51 +01:00
colibri_t20.h ARM: tegra: update colibri_t20 configuration 2015-03-30 10:04:44 -07:00
colibri_t30.h apalis/colibri_t30: add misc cmds increase buf sizes and max args 2015-03-04 10:09:02 -07:00
colibri_vf.h colibri_vf: Enable USB support for Colibri Vybrid 2015-04-23 14:56:09 -04:00
controlcenterd.h kconfig: move CONFIG_CMD_BOOTM to Kconfig 2014-09-24 18:30:28 -04:00
corenet_ds.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
corvus.h arm, at91: corvus: move MACH_TYPE to defconfig 2015-04-01 01:04:28 +02:00
CPCI2DP.h ppc4xx: switch CPCI2DP to generic board 2015-01-13 09:37:26 -05:00
CPCI4052.h ppc4xx: cleanup CPCI4052 board 2015-01-13 09:37:26 -05:00
cpu9260.h at91: remove redundant AT91FAMILY definition in board config file 2014-05-27 00:10:52 +02:00
cpuat91.h ARM: remove CONFIG_ARM920T defines 2014-11-20 11:28:25 -05:00
crownbay.h x86: crownbay: Enable saving environment in SPI flash 2015-03-24 21:22:38 -06:00
csb272.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
csb472.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
da830evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
da850evm.h da850evm: Use generic board and libfdt, fix size for SPI flash 2015-01-05 15:13:46 -05:00
dalmore.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
davinci_dm355evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dm355leopard.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dm365evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dm6467evm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_dvevm.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_schmoogie.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_sffsdr.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
davinci_sonata.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
db-88f6820-gp.h arm: mvebu: Add Armada A38x DB-88F6820-GP board support 2015-05-05 14:32:05 +02:00
db-mv784mp-gp.h arm: mvebu: Change network init code to allow a more flexible setup 2015-05-05 14:31:49 +02:00
dbau1x00.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
devkit3250.h sizes.h - consolidate for all architectures 2014-03-04 12:15:01 -05:00
devkit8000.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
dig297.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
digsy_mtc.h powerpc: digsy_mtc: convert to generic board 2014-10-27 14:35:54 +01:00
dlvision-10g.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
dlvision.h board: dlvision: Reduce memory footprint 2014-11-19 08:48:41 +01:00
dnp5370.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
dns325.h ARM: kirkwood: dns325: Add generic board support 2015-01-12 09:38:47 -05:00
dockstar.h kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
dra7xx_evm.h ARM: DRA7XX: Enable Fastboot 2015-04-23 13:59:19 -04:00
draco.h siemens, draco: add new target 2014-05-13 19:43:01 -04:00
dreamplug.h dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb 2015-03-05 22:09:00 +01:00
duovero.h omap4: duovero: Add Gumstix DuoVero machine. 2014-05-23 19:40:05 -04:00
dxr2.h siemens: change LED indication in DFU mode 2014-05-13 19:43:00 -04:00
ea20.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
eb_cpu5282.h m68k: mcf52x2: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
eb_cpux9k2.h
ebony.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
eco5pk.h
ecovec.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
edb93xx.h ARM: remove CONFIG_ARM920T defines 2014-11-20 11:28:25 -05:00
edminiv2.h i2c: mvtwsi: Support for up to 4 different controllers 2015-04-15 16:33:17 +02:00
embestmx6boards.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
enbw_cmc.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
espt.h
ethernut5.h nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option 2015-03-30 23:16:54 -05:00
exynos-common.h exynos: config: enable arch memcpy and arch memset 2015-03-09 11:13:28 -04:00
exynos4-common.h config: exynos: common: Provide env variables to support Image.itb 2015-04-06 15:23:59 +09:00
exynos5-common.h exynos5: add trace feature #ifdef in exynos5-common.h 2015-04-06 14:19:36 +09:00
exynos5-dt-common.h dm: cros_ec: Convert to Kconfig 2015-02-19 06:19:18 -07:00
exynos5250-common.h sandbox: exynos: Move CONFIG_SOUND_WM8994 to Kconfig 2015-04-18 11:11:39 -06:00
exynos5420-common.h exynos: cros_ec: Drop unnecessary init 2015-04-18 11:11:15 -06:00
favr-32-ezkit.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
flea3.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
fx12mm.h
galileo.h x86: galileo: Enable saving environment in SPI flash 2015-03-24 21:22:38 -06:00
gdppc440etx.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
goflexhome.h kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
gose.h arm: rmobile: gose: Add support SDHI 2015-02-25 13:13:46 +09:00
gplugd.h arm: gplugd: convert to generic board 2015-03-05 22:08:59 +01:00
gr_cpci_ax2000.h sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition 2014-03-21 16:44:10 -04:00
gr_ep2s60.h sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition 2014-03-21 16:44:10 -04:00
gr_xc3s_1500.h sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition 2014-03-21 16:44:10 -04:00
grasshopper.h grasshopper: enable generic board 2015-02-17 22:54:39 +01:00
grsim.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
grsim_leon2.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
guruplug.h marvell: kirkwood: guruplug refresh for newer kernel 2015-01-26 00:25:29 +01:00
gw_ventana.h Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
h2200.h kconfig: move CONFIG_CMD_IMPORTENV to Kconfig 2014-09-24 18:30:29 -04:00
hammerhead.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
harmony.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
highbank.h ARM: highbank: convert to generic board 2014-05-25 15:18:26 +02:00
hrcon.h mpc83xx: Add gdsys hrcon board 2014-11-19 08:48:42 +01:00
hummingboard.h hummingboard: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:48 +01:00
ib62x0.h kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
ibf-dsp561.h bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards 2015-01-16 13:31:35 +08:00
icon.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
iconnect.h kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
ids8313.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
ima3-mx53.h
imx6_spl.h imx:mx6 add mx6sx in imx spl header file 2015-01-22 09:55:47 +01:00
imx27lite-common.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
imx27lite.h
imx31_litekit.h ARM: remove CONFIG_ARM1136 defines 2014-11-20 11:28:25 -05:00
imx31_phycore.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
inka4x0.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
integrator-common.h ARM: integrator: abolish CONFIG_INTEGRATOR 2015-04-23 08:52:27 -04:00
integratorap.h ARM: integrator: move board select into mach-integrator/Kconfig 2015-04-23 08:52:27 -04:00
integratorcp.h ARM: integrator: move CONFIG_ARCH_CINTEGRATOR to Kconfig 2015-04-23 08:52:27 -04:00
intip.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
io.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
io64.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
iocon.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
ip04.h bfin: enlarge the monitor size for ip04 board to avoid oversize link error 2015-01-16 13:31:35 +08:00
ipam390.h arm, da8xx: convert ipam390 board to generic board support 2015-03-05 10:08:13 -05:00
ipek01.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
jetson-tk1.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
jornada.h
jupiter.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
k2e_evm.h keystone2: config: align names of images with MCSDK 2014-11-06 11:04:39 -05:00
k2hk_evm.h keystone2: config: align names of images with MCSDK 2014-11-06 11:04:39 -05:00
k2l_evm.h keystone2: config: align names of images with MCSDK 2014-11-06 11:04:39 -05:00
katmai.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
kilauea.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
km82xx.h 82xx/km82xx: read the IVM eeprom earlier 2015-02-16 15:48:35 -05:00
km8360.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
km_kirkwood.h arm/km: disable subpage write for km_kirkwood_pci and kmsuv31 target 2014-08-30 07:46:41 -04:00
kmp204x.h kmp204x: add support for the kmcoge4 board 2014-02-03 08:38:50 -08:00
koelsch.h arm: rmobile: koelsch: Add support SDHI 2015-02-25 13:13:43 +09:00
ks2_evm.h ARM: remove CONFIG_ARMV7 defines 2014-11-20 11:28:24 -05:00
kwb.h board/BuR/kwb: Redesign default-environment 2015-03-05 20:13:20 -05:00
kzm9g.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
lacie_kw.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
lager.h arm: rmobile: lager: Add support SDHI 2015-02-25 13:13:49 +09:00
lp8x4x.h Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-01-10 10:56:00 -05:00
ls1021aqds.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
ls1021atwr.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
ls2085a_common.h ls2085a: esdhc: Add esdhc support for ls2085a 2015-04-23 16:46:51 -07:00
ls2085a_emu.h drivers/fsl-mc: Changed MC firmware loading for new boot architecture 2015-04-23 08:55:57 -07:00
ls2085a_simu.h drivers/fsl-mc: Changed MC firmware loading for new boot architecture 2015-04-23 08:55:57 -07:00
ls2085aqds.h ls2085a: esdhc: Add esdhc support for ls2085a 2015-04-23 16:46:51 -07:00
ls2085ardb.h ls2085a: esdhc: Add esdhc support for ls2085a 2015-04-23 16:46:51 -07:00
lsxl.h lsxl: switch from bootm to bootz for boot commands 2015-02-12 15:28:02 +01:00
luan.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
lwmon5.h powerpc: lwmon5: remove redundant CONFIG_SPL_* defines 2014-12-08 09:35:43 -05:00
m28evk.h arm: mxs: Define bootscript env variable on m28evk 2014-10-30 15:18:21 +01:00
m53evk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
M5208EVBE.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5235EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5249EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5253DEMO.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5253EVBE.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5272C3.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5275EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5282EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5329EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5373EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M5475EVB.h m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
M5485EVB.h m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
M52277EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M53017EVB.h m68k: add architecture-specific u-boot.lds 2015-04-23 14:56:07 -04:00
M54418TWR.h nand: yaffs: Remove the "nand write.yaffs" command 2015-03-30 23:24:39 -05:00
M54451EVB.h m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
M54455EVB.h m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk 2015-03-28 09:03:09 -04:00
magnesium.h
makalu.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
malta.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
maxbcm.h arm: mvebu: Change network init code to allow a more flexible setup 2015-05-05 14:31:49 +02:00
mcx.h mcx: update maintainer and convert to generic board 2015-04-09 16:48:03 -04:00
mecp5123.h powerpc: mecp5123: convert to generic board 2014-10-27 14:35:54 +01:00
medcom-wide.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
meesc.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
microblaze-generic.h microblaze: spl: Do not call mem_malloc_init and use early alloc 2015-02-09 15:13:12 +01:00
MigoR.h
mimc200.h avr32: use dlmalloc for DMA buffers 2015-02-17 22:52:39 +01:00
minnowmax.h x86: Add support for Intel Minnowboard Max 2015-02-06 12:07:39 -07:00
MIP405.h MIP405: convert to generic board 2014-10-10 09:44:44 -04:00
ml507.h
motionpro.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
MPC832XEMDS.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC837XEMDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC837XERDB.h Use generic board architecture for MPC837xERDB 2015-01-20 10:19:46 -05:00
mpc5121-common.h
mpc5121ads.h powerpc: mpc5121ads: convert to generic board 2014-10-27 14:35:54 +01:00
mpc8308_p1m.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8308RDB.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8313ERDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8315ERDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8323ERDB.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8349EMDS.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8349ITX.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
MPC8536DS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8540ADS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8541CDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8544DS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8548CDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8555CDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8560ADS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8568MDS.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8569MDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8572DS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
MPC8610HPCD.h powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
MPC8641HPCN.h powerpc/mpc8641hpcn: Move environment to avoid conflict 2015-04-20 10:15:30 -07:00
mpr2.h
ms7720se.h
ms7722se.h
ms7750se.h
mt_ventoux.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
munices.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
mv-common.h arm: mvebu: mv-common.h: Add CONFIG_PREBOOT 2015-05-05 14:32:04 +02:00
mv88f6281gtw_ge.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
mx6_common.h mx6_common: Do not select esdhc DDR mode for all boards 2015-03-13 13:35:12 +01:00
mx6cuboxi.h mx6cuboxi: Load the correct 'fdtfile' variable 2015-04-27 13:13:58 +02:00
mx6qarm2.h mx6qarm2: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:45 +01:00
mx6qsabreauto.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx6sabre_common.h mx6sabre: Do not enable UMS with SPL 2015-03-13 13:46:51 +01:00
mx6sabresd.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx6slevk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx6sxsabresd.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx23_olinuxino.h
mx23evk.h mx23evk: Set default environment to use zImage 2014-02-11 11:04:40 +01:00
mx25pdk.h mx25pdk: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:48 +01:00
mx28evk.h mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected 2014-06-17 16:39:09 +02:00
mx31ads.h mx31ads: Convert to generic board 2015-02-24 17:13:36 -05:00
mx31pdk.h mx31pdk: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:47 +01:00
mx35pdk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx51_efikamx.h spi: mxc: fix sf probe when using mxc_spi 2014-09-24 17:25:39 +05:30
mx51evk.h mx51evk: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:47 +01:00
mx53ard.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx53evk.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx53loco.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mx53smd.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
mxs.h mxs: Use the default CONFIG_SYS_PBSIZE 2015-03-13 13:13:48 +01:00
nas220.h Add support for Seagate BlackArmor NAS220 2015-01-14 11:37:39 -05:00
neo.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
nhk8815.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
nios2-generic.h nios2: rebase nios2-generic board to 3c120 reference design 2014-08-30 17:48:43 +08:00
nitrogen6x.h Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
nokia_rx51.h ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:33 -04:00
novena.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
nyan-big.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
o2d.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2d300.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2dnt-common.h powerpc: o2dnt: convert to generic board 2014-11-07 16:27:05 -05:00
o2dnt2.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2i.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o2mnt.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
o3dnt.h Use __stringify() instead of xstr() 2014-10-27 17:54:13 -04:00
ocotea.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
odroid.h Odroid U3: use common code for dram reservation 2015-03-04 21:25:35 +09:00
odroid_xu3.h Odroid-XU3: enable the last dram bank and reserve 22MiB 2015-03-04 21:25:35 +09:00
omap3_beagle.h omap3_beagle: Add boot script support to omap3 beagle board 2014-09-04 13:05:57 -04:00
omap3_cairo.h omap3: add support for QUIPOS Cairo board. 2015-03-05 20:13:21 -05:00
omap3_evm.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap3_evm_common.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_evm_quick_mmc.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap3_evm_quick_nand.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap3_igep00x0.h OMAP3: igep0032: Fix regression due commit f3b4bc45. 2015-02-24 17:04:00 -05:00
omap3_logic.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_mvblx.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_overo.h omap3: overo: Add usb host support 2014-10-23 11:53:01 -04:00
omap3_pandora.h omap3: pandora: use common configuration 2015-04-09 16:49:37 -04:00
omap3_sdp3430.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
omap3_zoom1.h ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs 2015-03-13 09:28:57 -04:00
omap4_panda.h ARM: omap4_panda: enable saveenv command 2015-03-28 12:07:44 -04:00
omap4_sdp4430.h ARM: OMAP4: Rename to ti_omap4_common.h 2014-01-24 11:38:39 -05:00
omap5_uevm.h TI: armv7: enable UUID and PART 2015-01-05 15:13:45 -05:00
omapl138_lcdk.h davinci: add support for omapl138-lcdk board 2015-04-23 13:58:43 -04:00
openrd.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
openrisc-generic.h
origen.h ORIGEN: Enhance origen config to be more flexible on boot. 2014-11-25 10:30:25 +09:00
ot1200.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
otc570.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
p1_p2_rdb_pc.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
p1_twr.h board/freescale: use generic board architecture for p1025-twr 2014-12-05 08:06:09 -08:00
p3p440.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
P1010RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P1022DS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P1023RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P2041RDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
P3041DS.h
P4080DS.h
P5020DS.h
P5040DS.h powerpc/P5040DS: enable SATA support 2014-12-05 08:06:10 -08:00
palmld.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
palmtc.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
palmtreo680.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
PATI.h PATI: fix broken SPI access 2014-10-10 09:44:44 -04:00
paz00.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
pb1x00.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
pcm030.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
pcm051.h pcm051: Add boot script support to pcm051 2015-01-13 15:26:10 -05:00
pcs440ep.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
pdm360ng.h powerpc: pdm360ng: convert to generic board 2014-10-27 14:35:54 +01:00
peach-pi.h config: peach: Correct memory layout environment settings 2015-04-06 14:21:29 +09:00
peach-pit.h config: peach: Correct memory layout environment settings 2015-04-06 14:21:29 +09:00
pengwyn.h ARM: omap: move board specific NAND configs out from ti_armv7_common.h 2014-07-25 16:26:12 -04:00
pepper.h am335x: pepper: Add Gumstix Pepper AM335x-based machine 2014-05-13 19:47:51 -04:00
PIP405.h PIP405: convert to generic board 2014-10-10 09:44:44 -04:00
platinum.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
platinum_picon.h arm: mx6: Add Barco platinum-picon and platinum-titanium 2015-01-19 09:07:31 +01:00
platinum_titanium.h arm: mx6: Add Barco platinum-picon and platinum-titanium 2015-01-19 09:07:31 +01:00
PLU405.h ppc4xx: switch PLU405 to generic board 2015-01-13 09:37:26 -05:00
plutux.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
pm9g45.h PM9G45 adding generic board support 2015-01-13 09:37:27 -05:00
pm9261.h PM9261 adding generic board support 2015-01-13 09:37:27 -05:00
pm9263.h PM9263 adding generic board support 2015-01-13 09:37:27 -05:00
PMC405DE.h ppc4xx: switch PMC405DE to generic board 2015-01-13 09:37:26 -05:00
PMC440.h ppc4xx: update PMC440 board support 2014-10-27 17:54:13 -04:00
pogo_e02.h kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define 2015-01-25 23:56:16 +01:00
porter.h arm: rmobile: Add Porter board support 2015-02-25 14:17:49 +09:00
pr1.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
pxa-common.h
pxa255_idp.h
pxm2.h arm, am335x: siemens boards add FIT support 2014-12-04 21:28:32 -05:00
qemu-mips.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
qemu-mips64.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
qemu-ppce500.h qemu-ppce500: Add support for 64bit CCSR map 2015-04-20 10:15:29 -07:00
qong.h ARM: remove CONFIG_ARM1136 defines 2014-11-20 11:28:25 -05:00
r0p7734.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
r2dplus.h
r7780mp.h sh: sh4: Remove CONFIG_SH4A definition from source code 2014-01-09 12:47:15 +09:00
rcar-gen2-common.h malloc_f: enable SYS_MALLOC_F by default if DM is on 2015-03-28 09:03:09 -04:00
rd6281a.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
redwood.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
rpi-common.h rpi: add support for Raspberry Pi 2 model B 2015-02-21 08:28:16 -05:00
rpi.h rpi: add support for Raspberry Pi 2 model B 2015-02-21 08:28:16 -05:00
rpi_2.h rpi: add support for Raspberry Pi 2 model B 2015-02-21 08:28:16 -05:00
rsk7203.h sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig 2014-11-13 08:47:58 +09:00
rsk7264.h sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig 2014-11-13 08:47:58 +09:00
rsk7269.h sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig 2014-11-13 08:47:58 +09:00
rut.h arm, am335x: siemens boards add FIT support 2014-12-04 21:28:32 -05:00
s5p_goni.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
s5pc210_universal.h usb: s3c-otg: Split out PHY control 2014-11-07 16:32:02 +01:00
sama5d3_xplained.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sama5d3xek.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sama5d4_xplained.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sama5d4ek.h ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h 2015-04-01 01:04:32 +02:00
sandbox.h sandbox: add config_distro_defaults and config_distro_bootcmd 2015-04-19 14:45:58 -06:00
sansa_fuze_plus.h usb: mv_udc: Rename to ci_udc 2014-02-06 04:48:15 +01:00
sbc35_a9g20.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
sbc405.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
sbc8349.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
sbc8548.h sbc8548: enable and test CONFIG_SYS_GENERIC_BOARD 2014-11-14 11:12:13 -08:00
sbc8641d.h powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
sc3.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
sc_sps_1.h
scb9328.h ARM: remove CONFIG_ARM920T defines 2014-11-20 11:28:25 -05:00
seaboard.h tegra: seaboard: Remove unused CONFIG_UART_DISABLE_GPIO 2015-03-30 09:59:58 -07:00
secomx6quq7.h board/seco: Add mx6q-uq7 basic board support 2015-03-23 13:19:18 +01:00
sequoia.h ppc4xx: Remove 4xx NAND booting support 2014-03-07 10:59:06 -05:00
sh7752evb.h sh: Move SH_32BIT to Kconfig 2014-11-17 13:16:20 +09:00
sh7753evb.h sh: Move SH_32BIT to Kconfig 2014-11-17 13:16:20 +09:00
sh7757lcr.h sh: Move SH_32BIT to Kconfig 2014-11-17 13:16:20 +09:00
sh7763rdp.h
sh7785lcr.h sh: sh4: Remove CONFIG_SH4A definition from source code 2014-01-09 12:47:15 +09:00
sheevaplug.h kirkwood: sheevaplug: add FDT support 2015-02-06 17:24:34 +01:00
shmin.h configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE 2014-02-19 11:10:05 -05:00
siemens-am33x-common.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
silk.h arm: rmobile: silk: Add support SDHI 2015-02-25 14:20:10 +09:00
smdk2410.h Merge branch 'master' of http://git.denx.de/u-boot-samsung 2014-11-26 11:21:16 -05:00
smdk5250.h exynos: cros_ec: Drop unnecessary init 2015-04-18 11:11:15 -06:00
smdk5420.h Exynos: Move down common USB configuration 2014-12-30 17:04:02 +09:00
smdkc100.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
smdkv310.h usb: s3c-otg: Split out PHY control 2014-11-07 16:32:02 +01:00
snapper9260.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
snow.h dm: usb: exynos: Enable both USB ports on snow 2015-04-18 11:11:29 -06:00
snowball.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
socfpga_arria5.h arm: socfpga: Add Altera Arria V DK support 2015-03-04 23:07:04 +01:00
socfpga_common.h arm: socfpga: spl: Adjust the SYS_INIT_RAM_SIZE to have room for the spl malloc 2015-04-21 12:23:17 +02:00
socfpga_cyclone5.h arm: socfpga: Add USB and UDC support for Cyclone V DK 2015-03-04 23:07:04 +01:00
socrates.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
spear-common.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
spear3xx_evb.h
spear6xx_evb.h net/designware - switch driver to phylib usage 2014-02-07 09:16:46 -05:00
stamp9g20.h at91: enable USB ethernet for taskit stamp9g20 2014-03-12 17:04:34 -04:00
stm32f429-discovery.h stm32f4: Add support for stm32f429-discovery board 2015-04-22 12:14:55 -04:00
stv0991.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
stxgp3.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
stxssa.h powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk 2014-01-24 16:59:08 -05:00
sun4i.h sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock 2015-03-29 13:36:03 +02:00
sun5i.h sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock 2015-03-29 13:36:03 +02:00
sun6i.h sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock 2015-03-29 13:36:03 +02:00
sun7i.h sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock 2015-03-29 13:36:03 +02:00
sun8i.h sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clock 2015-03-29 13:36:03 +02:00
sunxi-common.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
suvd3.h
t3corp.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
t4qds.h powerpc/freescale: Convert selected boards to generic board architecture 2014-05-13 08:31:22 -07:00
T102xQDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T102xRDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T104xRDB.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T208xQDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T208xRDB.h board/t2080rdb: enable CONFIG_PHY_AQUANTIA 2015-04-20 10:15:30 -07:00
T1040QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T4240EMU.h mpc85xx: inhibit qman and bman portals by default 2014-12-15 09:16:07 -08:00
T4240QDS.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
T4240RDB.h T4240RDB: Enable CONFIG_SYS_CORTINA_FW_IN_NOR config 2015-04-20 10:15:29 -07:00
taihu.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
taishan.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
tam3517-common.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
tao3530.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
taurus.h arm, at91: taurus remove MACH_TYPE definitions in config file 2015-02-07 23:43:24 +01:00
tb100.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
tbs2910.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
tcm-bf518.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
tcm-bf537.h blackfin: convert to use CONFIG_SYS_I2C framework 2014-11-17 08:10:37 +01:00
tec-ng.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
tec.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
tegra-common-post.h Merge branch 'master' of git://git.denx.de/u-boot-tegra 2014-10-23 14:05:34 -04:00
tegra-common-usb-gadget.h ARM: tegra: enable DFU too 2014-08-18 16:57:03 -07:00
tegra-common.h Merge branch 'master' of git://git.denx.de/u-boot-tegra 2015-03-10 19:09:18 -04:00
tegra20-common.h dm: i2c: tegra: Convert to driver model 2014-12-11 13:18:44 -07:00
tegra30-common.h dm: i2c: tegra: Convert to driver model 2014-12-11 13:18:44 -07:00
tegra114-common.h dm: i2c: tegra: Convert to driver model 2014-12-11 13:18:44 -07:00
tegra124-common.h dm: i2c: tegra: Convert to driver model 2014-12-11 13:18:44 -07:00
ti814x_evm.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
ti816x_evm.h ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
ti_am335x_common.h dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig 2015-02-12 15:17:28 -07:00
ti_armv7_common.h ti-armv7-common: increase malloc pool len by dfu mmc file buffer size 2015-03-09 11:13:29 -04:00
ti_omap3_common.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
ti_omap4_common.h TI:OMAP4: enable EXT support in SPL for OMAP4 boards 2014-10-27 17:54:09 -04:00
ti_omap5_common.h fastboot: ARM: OMAP5: Enable reboot-bootloader 2015-04-23 14:55:44 -04:00
titanium.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
tk71.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
tny_a9260.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
TQM823L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM823M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM834x.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
TQM850L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM850M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM855L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM855M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM860L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM860M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM862L.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM862M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM866M.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM885D.h powerpc: tqm8xx*: convert to generic board 2014-10-29 16:18:08 +01:00
TQM5200.h powerpc: TQM5200: convert to generic board 2014-10-29 16:18:09 +01:00
tqma6.h Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-04-28 12:15:13 -04:00
tqma6_mba6.h arm: mx6: tqma6: Extract baseboard configs into separate config file 2015-04-22 16:02:45 +02:00
trats.h config: exynos: trats: Enable support for Image.itb at trats device 2015-04-06 15:23:59 +09:00
trats2.h config: exynos: trats2: Enable support for Image.itb at trats2 device 2015-04-06 15:23:59 +09:00
tricorder.h ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 2015-03-13 09:29:24 -04:00
trimslice.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
trizepsiv.h
tseries.h board/BuR/tseries: reactivate NAND-board 2015-04-23 08:52:26 -04:00
tt01.h ARM: remove CONFIG_ARM1136 defines 2014-11-20 11:28:25 -05:00
tuxx1.h
twister.h
tx25.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
u8500_href.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
udoo.h config: remove redundant CONFIG_SYS_PROMPT defines 2014-11-23 06:49:02 -05:00
uniphier.h ARM: UniPhier: add empty lowlevel_init to U-boot proper 2015-03-24 00:15:48 +09:00
usb_a9263.h spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header 2014-11-17 08:47:16 -05:00
usbarmory.h ARM: mx5: add support for USB armory board 2015-04-09 09:14:12 +02:00
v5fx30teval.h
v38b.h powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition 2014-01-24 16:59:21 -05:00
VCMA9.h nand: yaffs: Remove the "nand write.yaffs" command 2015-03-30 23:24:39 -05:00
vct.h generic-board: select SYS_GENERIC_BOARD for some architectures 2015-03-28 09:03:08 -04:00
ve8313.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
venice2.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
ventana.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
versatile.h ARM: remove CONFIG_ARM926EJS defines 2014-11-20 11:28:25 -05:00
vexpress_aemv8a.h vexpress64: use DM for all vexpress64 boards 2015-04-23 08:52:26 -04:00
vexpress_ca5x2.h
vexpress_ca9x4.h
vexpress_ca15_tc2.h ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options 2014-11-24 09:09:49 +01:00
vexpress_common.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
vf610twr.h arm: vf610: Remove duplicate MTD defines. 2015-01-14 11:35:44 -05:00
vision2.h spi: mxc: fix sf probe when using mxc_spi 2014-09-24 17:25:39 +05:30
vl_ma2sc.h ARM: at91: remove redundant ARM926EJS definition in board config files 2014-05-27 00:10:53 +02:00
vme8349.h mpc83xx: preempt premature board support removal by setting GENERIC_BOARD 2015-03-17 15:21:15 -04:00
VOM405.h ppc4xx: switch VOM405 to generic board 2015-01-13 09:37:27 -05:00
vpac270.h pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere 2015-03-02 10:59:50 +01:00
walnut.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
wandboard.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
warp.h warp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE 2015-03-13 13:35:35 +01:00
whistler.h ARM: tegra: move common config defines centrally 2015-03-04 10:08:56 -07:00
wireless_space.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
woodburn.h
woodburn_common.h driver/i2c/mxc: Enable I2C bus 3 and 4 2015-04-23 08:55:53 -07:00
woodburn_sd.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
work_92105.h lpc32xx: add support for board work_92105 2015-04-10 14:23:39 +02:00
x86-chromebook.h x86: Move common Chromebook config into a separate file 2015-04-16 19:27:40 -06:00
x86-common.h sandbox: Move CONFIG_SYS_VSNPRINTF to Kconfig 2015-04-18 11:11:37 -06:00
x600.h Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig 2015-04-18 11:11:36 -06:00
xaeniax.h
xfi3.h usb: mv_udc: Rename to ci_udc 2014-02-06 04:48:15 +01:00
xilinx-ppc.h
xilinx-ppc405-generic.h
xilinx-ppc405.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
xilinx-ppc440-generic.h
xilinx-ppc440.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
xilinx_zynqmp.h zynqmp: Enable SDHCI0 options 2015-04-29 11:19:04 +02:00
xpedite517x.h powerpc: xes: Convert to generic board 2015-01-12 09:38:47 -05:00
xpedite520x.h powerpc: xes: Convert to generic board 2015-01-12 09:38:47 -05:00
xpedite537x.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
xpedite550x.h nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE 2015-03-30 23:24:39 -05:00
xpedite1000.h powerpc: xes: Convert to generic board 2015-01-12 09:38:47 -05:00
yosemite.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
yucca.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
zeus.h powerpc: ppc4xx: remove redundant CONFIG_4xx definition 2014-01-24 16:59:07 -05:00
zipitz2.h remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ 2015-03-02 10:59:50 +01:00
zmx25.h zmx25: Convert to generic board 2015-02-24 17:13:57 -05:00
zynq-common.h ARM: zynq: move SoC sources to mach-zynq 2015-04-29 11:19:05 +02:00
zynq_microzed.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_picozed.h zynq: Add Zynq PicoZed board support 2015-04-29 11:19:02 +02:00
zynq_zc70x.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_zc770.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_zed.h kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig 2014-09-25 09:31:24 -04:00
zynq_zybo.h zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig 2014-11-13 08:38:22 -05:00