Commit graph

157 commits

Author SHA1 Message Date
Kumar Gala
ddde74a159 85xx: remove dummy board_early_init_f
A number of board ports have empty version of board_early_init_f
for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 00:36:02 -05:00
Kumar Gala
978e81604c 85xx: Remove unused and unconfigured memory test code.
Remove unused and unconfigured DDR test code from FSL 85xx boards.
Besides, other common code exists.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-11 00:35:52 -05:00
Haavard Skinnemoen
d255bb0e78 SPI API improvements
This patch gets rid of the spi_chipsel table and adds a handful of new
functions that makes the SPI layer cleaner and more flexible.

Instead of the spi_chipsel table, each board that wants to use SPI
gets to implement three hooks:
  * spi_cs_activate(): Activates the chipselect for a given slave
  * spi_cs_deactivate(): Deactivates the chipselect for a given slave
  * spi_cs_is_valid(): Determines if the given bus/chipselect
    combination can be activated.

Not all drivers may need those extra functions however. If that's the
case, the board code may just leave them out (assuming they know what
the driver needs) or rely on the linker to strip them out (assuming
--gc-sections is being used.)

To set up communication parameters for a given slave, the driver needs
to call spi_setup_slave(). This returns a pointer to an opaque
spi_slave struct which must be passed as a parameter to subsequent SPI
calls. This struct can be freed by calling spi_free_slave(), but most
driver probably don't want to do this.

Before starting one or more SPI transfers, the driver must call
spi_claim_bus() to gain exclusive access to the SPI bus and initialize
the hardware. When all transfers are done, the driver must call
spi_release_bus() to make the bus available to others, and possibly
shut down the SPI controller hardware.

spi_xfer() behaves mostly the same as before, but it now takes a
spi_slave parameter instead of a spi_chipsel function pointer. It also
got a new parameter, flags, which is used to specify chip select
behaviour. This may be extended with other flags in the future.

This patch has been build-tested on all powerpc and arm boards
involved. I have not tested NIOS since I don't have a toolchain for it
installed, so I expect some breakage there even though I've tried
fixing up everything I could find by visual inspection.

I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
DataFlash drivers posted as a follow-up. I'd like some help testing
other boards that use the existing SPI API.

But most of all, I'd like some comments on the new API. Is this stuff
usable for everyone? If not, why?

Changed in v4:
  - Build fixes for various boards, drivers and commands
  - Provide common struct spi_slave definition that can be extended by
    drivers
  - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
  - Make default bus and mode build-time configurable
  - Override default SPI bus ID and mode on mx32ads and imx31_litekit.

Changed in v3:
  - Add opaque struct spi_slave for controller-specific data associated
    with a slave.
  - Add spi_claim_bus() and spi_release_bus()
  - Add spi_free_slave()
  - spi_setup() is now called spi_setup_slave() and returns a
    struct spi_slave
  - soft_spi now supports four SPI modes (CPOL|CPHA)
  - Add bus parameter to spi_setup_slave()
  - Convert the new i.MX32 SPI driver
  - Convert the new MC13783 RTC driver

Changed in v2:
  - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
    new API.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Tested-by: Guennadi Liakhovetski <lg@denx.de>
2008-06-03 20:28:50 +02:00
York Sun
a48ff68d23 Replace DPRINTF with debug
Remove DPRINTF macro and replace it with generic debug macro.

Signed-off-by: York Sun <yorksun@freescale.com>
2008-05-21 00:54:36 +02:00
York Sun
3b80c5f574 Move pixel clock setting to board file
The clock divider has different format in 5121 and 8610. This patch moves it to
board specific code.

Signed-off-by: York Sun <yorksun@freescale.com>
2008-05-21 00:54:36 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Andy Fleming
66f5fa9263 85xx: Limit CPU2 workaround to parts that have the errata
Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-05-07 16:54:31 -05:00
Kumar Gala
4d77f5102d MPC8610HPCD: Drop -O2 from the build flags
Make the flags use -Os like all other boards

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-03 20:49:10 +02:00
Kumar Gala
45239cf415 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
All the 85xx and 86xx UM describe the register as timing_cfg_3
not as ext_refrec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 11:44:29 -05:00
Ed Swarthout
f97abbfb47 MPC8544DS: decode pcie3 end-point configuration correctly.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-26 00:25:30 +02:00
Jason Wessel
3d36be0300 Remove all the search paths from the .lds files.
The cross compiler is responsible for providing the correct libraries
and the logic to find the linking libraries.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-04-17 23:57:32 -07:00
Wolfgang Denk
1aeed8d71a Coding Style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13 09:59:26 -07:00
Dave Liu
5fb5a689d8 mpc83xx: Fix the bug of serdes initialization
Currently the serdes will not be initializated due to the
partid's error.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-11 17:46:18 -05:00
Jean-Christophe PLAGNIOL-VILLARD
1ac4f320bf mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-11 17:46:17 -05:00
Wolfgang Denk
2c78febd11 Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-04-08 00:10:17 +02:00
TsiChung Liew
bae61eefe1 ColdFire: Add dspi and serial flash support for MCF5445x
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
2008-03-31 15:10:29 -06:00
Matthew Fettke
545c8e0a7c ColdFire: Added M5275EVB support.
Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
2008-03-31 15:10:11 -06:00
TsiChung Liew
77878f16ce ColdFire: Fix second memory Chipselect for M5475EVB
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
2008-03-31 15:17:10 -05:00
Michael Barkowski
5b2793a3f3 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
This patch fixes eeprom page size so that you can now write more than
64 bytes at a time.

It also makes the board take MAC addresses, if found, from EEPROM.

User should place up to 4 addresses at offset 0x7f00, for
eth{,1,2,3}addr.  Any unused addresses should be zero.  This group of
four six-byte values should have it's CRC at the end.  crc32 and
eeprom commands can be used to accomplish this.

If CRC fails, MAC addresses come from the environment.  If CRC
succeeds, the environment is overwritten at startup.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-28 16:02:27 -05:00
Kim Phillips
e5c4ade4db mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
in the spirit of commit 1ced121600,
85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
and processor ID display.  Add REVID_{MAJ,MIN}OR macros to make
REVID dependent code simpler.  Also added PARTID_NO_E and IS_E_PROCESSOR
convenience macros.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-28 16:01:06 -05:00
Dave Liu
6f8c85e8d1 mpc83xx: initialize serdes for MPC837xEMDS boards
This patch is stolen from Anton Vorontsov's patch
for mpc837xerdb boards.

The reference clk and xcorevdd voltage of serdes1/2
is same between mpc837xemds and mpc837xerdb.

8377E: LYNX1- 2 SATA	LYNX2- 2 PCIE
8378E: LYNX1- 2 SGMII	LYNX2- 2 PCIE
8379E: LYNX1- 2 SATA	LYNX2- 2 SATA

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-28 14:11:51 -05:00
Jon Loeliger
25eedb2c19 FSL: Clean up board/freescale/common/Makefile
Each file that can be built here now follows some
CONFIG_ option so that they are appropriately built
or not, as needed.  And CONFIG_ defines were added
to various board config files to make sure that happens.

The other board/freescale/*/Makefiles no longer need
to reach up and over into ../common to build their
individually needed files any more.

Boards that are CDS specific were renamed with cds_ prefix.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-26 11:43:04 -05:00
Kumar Gala
f69766e4b5 85xx: Add the concept of CFG_CCSRBAR_PHYS
When we go to 36-bit physical addresses we need to keep the concept of
the physical CCSRBAR address seperate from the virtual one.

For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00
Anton Vorontsov
18e69a35ef 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
Linux understands "host" (default), "peripheral" and "otg" (broken).
Though, U-Boot doesn't restrict dr_mode variable to these values (think
of renames in future).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-25 19:19:39 -05:00
Anton Vorontsov
d47d49cc37 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
controller and FHCI (QE USB).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:47 -05:00
Anton Vorontsov
7ad9594909 mpc83xx: MPC8360E-RDK: add support for NAND
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:46 -05:00
Anton Vorontsov
2bd7460e92 83xx: initialize serdes for MPC837XRDB boards
On the MPC8377ERDB: 2 SATA and 2 PCI-E.
On the MPC8378ERDB: 2 PCI-E
On the MPC8379ERDB: 4 SATA

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-03-25 19:16:45 -05:00
Timur Tabi
89c7784ed9 83xx: Add Vitesse VSC7385 firmware uploading
Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
the Vitesse VSC7385 firmware.  Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
Cleaned up the board header files to make selecting the VSC7385 easier to
control.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-03-25 19:16:43 -05:00
Jon Loeliger
aa3511e422 FSL: Move board/mpc8266ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:40 +01:00
Jon Loeliger
7f1d846e5c FSL: Move board/mpc7448hpc2 under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:36 +01:00
Jon Loeliger
b7e24d283e FSL: Move board/mpc8260ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:00 +01:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Jon Loeliger
a551cee99a 86xx: Fix GUR PCI config registers properly.
Back in commit 975a083a5e where
I tried to "8610HPCD: Fix typos in two PCI setup registers", I
botched it due to not realizing that 8610 and 8641 had different
Global Utility Register defintions, one of which was like 85xx,
and the other wasn't.  Correct this problem by introducing two
symbols, one for each 86xx SoC, but neither of which is named
anything like 85xx.

My bad.  Lovely Wednesday with git bisect.  You know.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-20 14:45:09 -06:00
Jon Loeliger
975a083a5e 8610HPCD: Fix typos in two PCI setup registers.
The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
were erroneously present as 85xx names and values, leftover from
the clone wars.  Fix this by removing the 85xx cruft from the
86xx codebase.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-19 12:31:08 -06:00
Jon Loeliger
13f5433f70 86xx: Convert sbc8641d to use libfdt.
This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-18 14:01:56 -06:00
Jon Loeliger
3f2ac8f928 86xx: Fix compilation warning in sys_eprom.c
sys_eeprom.c:82:9: warning: unknown escape sequence '\/'

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-14 13:58:53 -06:00
Becky Bruce
9cd32426f2 86xx: Remove old-style law setup code
This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:40 -06:00
Becky Bruce
031976f636 86xx: Convert mpc8610hpcd to new law setup method.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:33 -06:00
Becky Bruce
4933b91f8a 86xx: Support new law setup method and convert mpc8641
Adds the support code in cpu/mpc86xx for the new law setup code
recently created fsl_law.c, and changes the MPC8641HPCN config
to use this code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:30 -06:00
Wolfgang Denk
e57ed96bac Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-01-23 14:23:13 +01:00
Wolfgang Denk
ed3afca32e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx 2008-01-23 14:18:18 +01:00
Wolfgang Denk
39166b5c9e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2008-01-23 13:56:55 +01:00
TsiChungLiew
1aee111135 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:42 -06:00
TsiChungLiew
1552af70ec ColdFire: Add MCF5227x cpu and M52277EVB support-1
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:41 -06:00
TsiChungLiew
1ac559d4aa ColdFire: Add M5373EVB platform support - 1
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:40 -06:00
TsiChungLiew
320d61991f ColdFire: Update FlexBus CS for MCF532x
Definition update and change from 16bit to 32bit

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:40 -06:00
Kim Phillips
2956acd5ef codingstyle cleanup for spi driver
..and rm unused CONFIG_FSL_SPI define

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 14:01:59 -06:00
Haiying Wang
d59feffb42 FSL: Fix common EEPROM_data structure definition
- Fix EEPROM_data structure definition according to System EEPROM Data Format.
- Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
  bd->bi_ethaddr.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-01-17 12:26:56 -06:00
Ben Warren
80ddd22626 Implement hard SPI driver on MPC8349EMDS
This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
This board has an ST M25P40 4Mbit EEPROM on its SPI bus

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-17 11:02:33 -06:00
Kumar Gala
73aa9ac2b4 85xx: Convert MPC8568 MDS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17 02:08:53 -06:00