Commit graph

73057 commits

Author SHA1 Message Date
Marek Vasut
e935409199 clk: renesas: Make reset controller modemr register offset configurable
The MODEMR register offset changed on R8A779A0, make the MODEMR offset
configurable. Fill the offset in on all clock drivers. No functional
change.

Based off "clk: renesas: Make CPG Reset MODEMR offset accessible from
struct cpg_mssr_info" by Hai Pham <hai.pham.ud@renesas.com>

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:17 +02:00
Hai Pham
12dd238a64 clk: renesas: Add support for RPCD2 clock
This supports RPCD2 clock handling. While at it, add the check point
for RPC-IF clock RPCD2 Frequency Division Ratio, since it must be odd
number

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:17 +02:00
Hai Pham
1b004e2874 clk: renesas: Fix Realtime Module Stop Control Register offsets
This patch fixes Realtime Module Stop Control Register (RMSTPCR) offsets
based on R-Car Gen3, H2/M2/M2N/E2/E2X hardware user's manual.
The r8a73a4 only has RMSTPCR0 - RMSTPCR5 so this calculation change
doesn't affect it.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:17 +02:00
Hai Pham
efece632e7 clk: renesas: Fix incorrect return RPC clk_get_rate
RPC clk_get_rate will return error code instead of expected clock rate.
Fix this.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:16 +02:00
Marek Vasut
ccc2c9aab1 clk: renesas: Reinstate RPC clock on R-Car D3/E3
Reinstate RPC clock on D3/E3 after Linux 5.12 synchronization.
The D3 and E3 clock drivers do not contain RPC clock entries
mainline Linux yet.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:16 +02:00
Marek Vasut
f7b4e4c094 clk: renesas: Synchronize R-Car Gen3 tables with Linux 5.12
Synchronize R-Car Gen3 clock tables with Linux 5.12,
commit 9f4ad9e425a1 ("Linux 5.12") .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:16 +02:00
Marek Vasut
8152c189bd clk: renesas: Synchronize R-Car Gen2 tables with Linux 5.12
Synchronize R-Car Gen2 clock tables with Linux 5.12,
commit 9f4ad9e425a1 ("Linux 5.12") .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:16 +02:00
Marek Vasut
f07c9ecb36 clk: renesas: Synchronize RZ/G2 tables with Linux 5.12
Synchronize RZ/G2 clock tables with Linux 5.12,
commit 9f4ad9e425a1 ("Linux 5.12") .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:16 +02:00
Tom Rini
27c2236f8a Xilinx changes for v2021.07-rc3
ZynqMP:
 - Syncup DT with Linux kernel
 - Fix mmc mini configurations via DT
 - Add pinctrl/psgtr description to DTs
 - Add DTs for Kria boards
 - Enable RTC and Time commands
 
 Versal:
 - Fix early BSS section location
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYKTbXAAKCRDKSWXLKUoM
 IYV+AKCeHWADR2nP2jPPByI5YdmQWMez8gCeLSgLiVak7Its1c/uE0h4izQvGbE=
 =j5p2
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.07-rc3

ZynqMP:
- Syncup DT with Linux kernel
- Fix mmc mini configurations via DT
- Add pinctrl/psgtr description to DTs
- Add DTs for Kria boards
- Enable RTC and Time commands

Versal:
- Fix early BSS section location
2021-05-19 11:50:25 -04:00
Michal Simek
c0e6feeb34 xilinx: zynqmp: Enable DM_RTC/emul driver/cmd date/gettime and efi settime
Right now U-Boot is not aware about date/time that's why enable it by
default also with EFI runtime service for setting time.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 10:02:20 +02:00
T Karthik Reddy
2a6e6c81f4 xilinx: versal: Enable CONFIG_POSITION_INDEPENDENT
U-Boot expects to be linked to a specific hard-coded address and to
be loaded to and run from that address. CONFIG_POSITION_INDEPENDENT
config lifts that restriction & allowing the code to be loaded to
and executed from almost any address.

As we enabled CONFIG_POSITION_INDEPENDENT, CONFIG_INIT_SP_RELATIVE
is enabled by default, where it will set the early stack pointer at
runtime by adding an offset value to &_bss_start. The offset value
is taken from SYS_INIT_SP_BSS_OFFSET.

SYS_INIT_SP_BSS_OFFSET offset should be large enough so that the
early malloc region, global data (gd), and early stack should fit.
With commit d8fabcc424bd ("arm64: versal: Increase SYS_MALLOC_F_LEN")
SYS_MALLOC_F_LEN is increased from 32KB to 1MB, so we need to
accommodate this space with SYS_INIT_SP_BSS_OFFSET. Hence increasing
SYS_INIT_SP_BSS_OFFSET to 1.5MB.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
a502a87bc0 arm64: zynqmp: Add description for SOM/Kria boards
The patch contains several DT files for SOM platform.
Carrier card is sck-kv (KV260) revA/B. SMK-K26 is description for starter
kit which doesn't have EMMC populated. And SM-K26 is full som with EMMC.

Files are divided in this way to make sure that SOM can be plugged to
different carrier card and all peripherals on SOM (or defined by a spec) can
be used by U-Boot. Full DT for SOM+CC can be merged together as overlays.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
3195840c94 arm64: zynqmp: Add psgtr DT descriptions
Mainline kernel has psgtr driver that's why it is good to add description
to DT files. Some boards are just missing description for USB3 and sata.
zc1751-dc1 and p-a2197 are also missing clock descriptions for input
clocks.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
bd00849ae9 arm64: zynqmp: Add pinctrl description
ZynqMP pinctrl Linux driver has been merged to 5.13-rc1 kernel. Based on it
DT files can be extended by pinctrl configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
T Karthik Reddy
50a6bd000f arm64: zynqmp: Add zynqmp firmware specific DT nodes
Probe zynqmp firmware driver by adding zynqmp firmware, power &
ipi mailbox device tree nodes for mini emmc.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
26d8eccea7 arm64: zynqmp: Add missing mio-bank properties to sdhci
Add missing xlnx,mio-bank property to sdhci node. Also add properties with
0 value to have it listed in case that files are copied to different
projects where default case doesn't need to be handled in the same way.
That's why explicitly list them too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
fddff6815a arm64: zynqmp: Remove comment about clock chips
These comments weren't push to mainline that's why remove them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Raviteja Narayanam
486f25c727 arm64: zynqmp: Add 'i2c-mux-idle-disconnect' property
I2C muxes that have the slave devices with same address are
falling into the below problem.

VCK190 system controller (SC) - zynqmp-e-a2197-00-revA.dts
I2C1 (0xff030000) -> Mux1 (@0x74) -> Channel 3 -> 0x50
I2C1 (0xff030000) -> Mux2 (@0x75) -> Channel 0 -> 0x50

1. SC accesses I2C1 - Mux1 (0x74) - Channel 3 and then
2. SC accesses I2C1 - Mux2 (0x75) - Channel 0.

Now it results in 2 slave devices with same address (0x50)
on the I2C bus, making the communication un-reliable.

When ' i2c-mux-idle-disconnect' is in DT, after '1', the Mux
channel output is disconnected, making none of the channels
available to the I2C1. So, there is no question of having the
same addressed slave (0x50) present on the bus when we are doing '2'.

Same pattern is seen in below two boards also.

ZCU208 - zynqmp-zcu208-revA.dts
ZCU216 - zynqmp-zcu216-revA.dts

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
2021-05-19 09:44:50 +02:00
Saeed Nowshadi
000b862325 arm64: zynqmp: Add label to all GPIO lines for VCK190 SC
Add label to GPIO lines so the user-level applications can find any line
without knowing its physical path on System Controller on VCK190/VMK180.

These labels are describing EMIO gpio connection which depends on PL which
we normally don't describe but that's only way to go for now. Lately this
should be done out of this source code.

Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Saeed Nowshadi
65a572b1d0 arm64: zynqmp: Add 'silabs,skip-recall' to DDR DIMM si570 clk node
The 'silabs,skip-recall' property prevents interruption in operation of
the clock while the driver is being probed.  Without this property, the
DDR DIMM clk can cause a failure during Versal's boot.

Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xilinx.com>
2021-05-19 09:44:50 +02:00
Michal Simek
a34a12fabc arm64: zynqmp: Add missing silabs,skip-recall for si570 ref clk nodes
All si570 which are used for ps reference clock generation should contain
silabs,skip-recall property not to cause break on ps clock.
On Versal boards this will cause hang on Versal cpu when it is booted at
the same time with SC.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19 09:44:50 +02:00
Tom Rini
428bec7cf9 Merge branch '2021-05-17-assorted-fixes' 2021-05-18 14:17:54 -04:00
Tom Rini
7a1638c263 Pull request for efi-2021-07-rc3
Documentation:
 
 * add a man-page for the size command
 * add man-page for extension command to index
 
 Bug fixes:
 
 * avoid build failure due to missing SHA512 hardware acceleration
 * correct error handling in TCG2 protocol
 * don't let user disable capsule authentication
 * correct reading directories via UEFI API
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmCjmakACgkQxIHbvCwF
 GsSP4Q//eVn72X0WpP0yMBj/lSl1S2vP5RW+5ThWKAGvzQ/iV6h2A5Z8qOHjOTOk
 pbm3ywDFpUiOYaN0+sdOzSwBEPOR3Brob4VKfM+aE/6r9X+qBzbBHK/X3e+I3moZ
 Uxffa+yrP6xjnLO3u9e2jAD6jYxMaGApq72DAojlb8pBZep8jaiW6BGUlf4in6nk
 5AiGJc41Vv872JoZ/FnwXnL8MZYGO1FgzmJvUcq4HV+GwG9QRhUZV8o9p1vIQc1n
 rxE5CfpyOf8WvmVuD3SFU6VueeTBrp8+WV+u13ivwddCOERD0pAFkP5Md/s26Cvd
 UJ06il20BoHWMAgVOthnkUvc3eaaMvERghhCBFI++SoHX4Ly3r3p6loEj2d49RXa
 ddAoR4O8mdSwQ9aRjBAQZctECXmrHn/eAAFNkvbegueUDwlDWytucuvD7X2T450g
 dVTLjsleMplt+cWypChcG0YYgTfOEuYnHjbDjEZXEBier6vpIFKsFFmX9AX+0p+k
 5rfdWA58gWYzrMfjq2rThv6GyqKOrjBO825esWEA8XH5SXV2UKbzw9BziMjtFZNo
 6urSigMfmylhnG0fHacsD1jttrHTlLjLhqRNDB2fmmdXzsRKpPCJzhW68OxgaoF/
 56efvDLXUWrI9w7kMaPqyQNO/d5bJvKd1QzJouQxFbnp6vkd0oA=
 =h8yY
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-07-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-07-rc3

Documentation:

* add a man-page for the size command
* add man-page for extension command to index

Bug fixes:

* avoid build failure due to missing SHA512 hardware acceleration
* correct error handling in TCG2 protocol
* don't let user disable capsule authentication
* correct reading directories via UEFI API
2021-05-18 11:10:00 -04:00
Tom Rini
52993fcb76 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2021-05-18 11:09:41 -04:00
Masahisa Kojima
87316da05f lib: introduce HASH_CALCULATE option
Build error occurs when CONFIG_EFI_SECURE_BOOT or
CONFIG_EFI_CAPSULE_AUTHENTICATE is enabled,
because hash-checksum.c is not compiled.

Since hash_calculate() implemented in hash-checksum.c can be
commonly used aside from FIT image signature verification,
this commit itroduces HASH_CALCULATE option to decide
if hash-checksum.c shall be compiled.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:13 +02:00
Ilias Apalodimas
48ee084602 efi_loader: Fix Kconfig for EFI_TCG2 protocol
EFI_TCG2 depends not only on TPMv2 but also on the underlying algorithms.
So select the missing SHA1, SHA256, SHA384 and SHA512 we currently support

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

Add 'default y'.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:13 +02:00
Ilias Apalodimas
2052759a5e efi_loader: Don't stop EFI subsystem init if installing TCG2 fails
Up to now we are stopping the EFI subsystem if a TPMv2 exists but the
protocol fails to install.  Now that we've switched the config to 'default
y' the sandbox TPM fails, since it doesn't support all the required
capabilities of the protocol.

Not installing the protocol is not catastrophic.  If the protocol fails
to install the PCRs will never be extended to the expected values, so
some other entity later in the boot flow will eventually figure it out
and take the necessary actions.

While at it fix a corner case were the user can see an invalid error
message when the protocol failed to install.  We do have a tcg2_uninit()
which we call when the protocol installation fails.  There are cases though
that this might be called before the configuration table is installed (e.g
probing the TPM for capabilities failed).  In that case the user will see
"Failed to delete final events config table".  So stop printing it since it's
not an actual failure , simply because the config table was never installed
in the first place.

In order to stop printing it make efi_init_event_log() and create_final_event()
cleanup themselves and only call tcg2_uninit() when the protocol installation
fails.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:13 +02:00
Ilias Apalodimas
97f446a8ff efi_loader: Uninstall the TCG2 protocol if logging s-crtm fails
Instead of just failing, clean up the installed config table and
EventLog memory if logging an s-crtm event fails during the protocol
installation

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

Eliminate label 'out:' by using return.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:13 +02:00
Ilias Apalodimas
b76edf6b07 efi_loader: Clean up tcg2 once in case of failure
efi_init_event_log() calls tcg2_uninit() in case of failure.
We can skip that since the function is called on efi_tcg2_register()
which also cleans up if an error occurs

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:12 +02:00
Peng Fan
bc3f465181 efi_loader: loosen buffer parameter check in efi_file_read_int
This is same issue as https://bugzilla.redhat.com/show_bug.cgi?id=1733817,
but that fix was wrongly partial reverted.

When reading a directory, EFI_BUFFER_TOO_SMALL should be returned when
the supplied buffer is too small, so a use-case is to call
EFI_FILE_PROTOCOL.Read() with *buffer_size=0 and buffer=NULL to
obtain the needed size before doing the actual read.

So remove the check only for directory reading, file reading already
do the check by itself.

Fixes: db12f518edb0("efi_loader: implement non-blocking file services")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefan Sørensen <stefan.sorensen@spectralink.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:12 +02:00
Sughosh Ganu
6a2e26b95f efi_loader: capsule: Remove the check for capsule_authentication_enabled environment variable
The current capsule authentication code checks if the environment
variable capsule_authentication_enabled is set, for authenticating the
capsule. This is in addition to the check for the config symbol
CONFIG_EFI_CAPSULE_AUTHENTICATE. Remove the check for the environment
variable. The capsule will now be authenticated if the config symbol
is set.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviwed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:12 +02:00
Heinrich Schuchardt
e2ae483c3b hash: Kconfig option for SHA512 hardware acceleration
Commit a479f103dc ("hash: Allow for SHA512 hardware implementations")
defined function definitions for hardware accelerated SHA384 and SHA512.
If CONFIG_SHA_HW_ACCEL=y, these functions are used.

We already have boards using CONFIG_SHA_HW_ACCEL=y but none implements the
new functions hw_sha384() and hw_sha512().

For implementing the EFI TCG2 protocol we need SHA384 and SHA512. The
missing hardware acceleration functions lead to build errors on boards like
peach-pi_defconfig.

Introduce a new Kconfig symbol CONFIG_SHA512_HW_ACCEL to control if the
functions hw_sha384() and hw_sha512() shall be used to implement the SHA384
and SHA512 algorithms.

Fixes: a479f103dc ("hash: Allow for SHA512 hardware implementations")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-18 12:36:12 +02:00
Heinrich Schuchardt
700f68c354 efi_loader: build warning in efi_tcg2_hash_log_extend_event
Building 32bit boards with the TCG2 protocol enabled leads to a build
warning due to a missing conversion.

    lib/efi_loader/efi_tcg2.c:774:27:
    error: cast to pointer from integer of different size
    [-Werror=int-to-pointer-cast]
    774 |  ret = tcg2_create_digest((u8 *)data_to_hash, data_to_hash_len,
        |                           ^

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-05-18 12:36:12 +02:00
Heinrich Schuchardt
06262c3836 doc: extension.rst missing in doc/usage/index.rst
'make htmldocs' results in a build warning

    checking consistency... doc/usage/extension.rst:
    WARNING: document isn't included in any toctree

Add the document to the index.

Fixes: 2f84e9cf06 ("cmd: add support for a new "extension" command")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:12 +02:00
Heinrich Schuchardt
566e857fff doc: man-page for size command
Provide a man-page for the size command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-05-18 12:36:12 +02:00
Ley Foon Tan
af02975eb9 MAINTAINERS, git-mailrc: socfpga: Update email address for Ley Foon
My mail address doesn't work any longer, change to gmail.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-05-17 17:18:40 -04:00
Simon Glass
a7d03d5342 Makefile: Handle building in a very old build directory
Versions of U-Boot before 2014.01 created a symlink from include/asm to
the architecture-specific header directory.

If an ARM board is build with that old version, then sandbox is built on
a more recent version (both with in-tree builds), the include/asm symlink
confuses the build system. It picks up the ARM headers when it should be
using the sandbox ones.

Since 2014 U-Boot has only created a symlink inside the include/asm/
directory and only for out-of-tree builds. So for in-tree builds it does
not expect to see an include/asm symlink. It is not removed by
'make mrproper'. It does show up with 'git status' but is easy enough to
miss.

Add include/asm to the files to remove with 'make mkproper'. For recent
U-Boot builds this has no effect, since include/asm is a directory, not a
file. If the include/asm symlink is there, it will be removed.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-05-17 17:18:40 -04:00
Igor Opaniuk
eefa9d7f08 psci: rename psci_features function
s/psci_features/request_psci_features/g for the case when both
ARCH_SUPPORT_PSCI=y and ARM_PSCI_FW=y, that leads to these
compilation issues:

drivers/firmware/psci.c:69:12: error: conflicting types for 'psci_features'
   69 | static int psci_features(u32 psci_func_id)
      |            ^~~~~~~~~~~~~
In file included from drivers/firmware/psci.c:23:
./arch/arm/include/asm/system.h:548:5: note: previous declaration of 'psci_features' was here
  548 | s32 psci_features(u32 function_id, u32 psci_fid);
      |     ^~~~~~~~~~~~~

Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Fixes: b7135b034f ("psci: add features/reset2 support")
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-05-17 17:18:40 -04:00
peng.wang@smartm.com
6c353b34cf cli: slighly more clear error messages
This patch tries to distinguish two error messages.

Signed-off-by: peng.wang@smartm.com <peng.wang@smartm.com>
2021-05-17 17:06:42 -04:00
Andrey Zhizhikin
f68ed0bcb8 Makefile: allow to override python3
Python3 taken from the PATH causes build issues when pylibfdt bindings are
generated with Yocto SDK.

Python3 provided as a part of SDK is not compatible with host Python3,
therefore binding build breaks with following errors:

scripts/dtc/pylibfdt/libfdt_wrap.c:154:11: fatal error: Python.h: No such file or directory
  154 | # include <Python.h>
      |           ^~~~~~~~~~

Do not enforce the python3 from the PATH and make it conditionally-assigned
so it can be overridden from outside of build system. Keep the default
assignment to point to version that is taken from the PATH.

Similar fix has been introduced in b48bfc74ee ("tools: allow to override
python"), where conditional assignment is used for python executable to
address similar build errors.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Simon Glass <sjg@chromium.org>
Fixes: e91610da7c ("kconfig: re-sync with Linux 4.17-rc4")
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-17 17:06:36 -04:00
Tom Rini
feddbdb55f Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Add base support for Marvell OcteonTX2 CN9130 DB (mostly done
  by Kostya)
- Sync Armada 8k MMU setup with Marvell version (misc Marvell
  authors)
- spi: kirkwood: Some fixes especially for baudrate generation
  (misc Marvell authors)
- mvebu: x530: Reduce SPL image size (Stefan)
- Rename "rx_training" to "mvebu_comphy_rx_training" (Stefan)
2021-05-17 10:01:56 -04:00
Bin Meng
89419279f4 riscv: Group assembly optimized implementation of memory routines into a submenu
Currently all assembly optimized implementation of memory routines
show up at the top level of the RISC-V architecture Kconfig menu.
Let's group them together into a submenu.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-17 16:47:33 +08:00
Bin Meng
703b84ec29 riscv: Fix memmove and optimise memcpy when misalign
At present U-Boot SPL fails to boot on SiFive Unleashed board, due
to a load address misaligned exception happens when loading the FIT
image in spl_load_simple_fit(). The exception happens in memmove()
which is called by fdt_splice_().

Commit 8f0dc4cfd1 introduces an assembly version of memmove but
it does take misalignment into account (it checks if length is a
multiple of machine word size but pointers need also be aligned).
As a result it will generate misaligned load/store for the majority
of cases and causes significant performance regression on hardware
that traps misaligned load/store and emulate them using firmware.

The current behaviour of memcpy is that it checks if both src and
dest pointers are co-aligned (aka congruent modular SZ_REG). If
aligned, it will copy data word-by-word after first aligning
pointers to word boundary. If src and dst are not co-aligned,
however, byte-wise copy will be performed.

This patch was taken from the Linux kernel patch [1], which has not
been applied at the time being. It fixes the memmove and optimises
memcpy for misaligned cases. It will first align destination pointer
to word-boundary regardless whether src and dest are co-aligned or
not. If they indeed are, then wordwise copy is performed. If they
are not co-aligned, then it will load two adjacent words from src
and use shifts to assemble a full machine word. Some additional
assembly level micro-optimisation is also performed to ensure more
instructions can be compressed (e.g. prefer a0 to t6).

With this patch, U-Boot boots again on SiFive Unleashed board.

[1] https://patchwork.kernel.org/project/linux-riscv/patch/20210216225555.4976-1-gary@garyguo.net/

Fixes: 8f0dc4cfd1 ("riscv: assembler versions of memcpy, memmove, memset")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-17 16:47:33 +08:00
Sean Anderson
e90cb0db34 riscv: Fix arch_fixup_fdt always failing without /chosen
If /chosen was missing, chosen_offset would never get updated with the new
/chosen node. This would cause fdt_setprop_u32 to fail. This patch fixes
this by setting chosen_offset. In addition, log any errors from setting
boot-hartid as well.

Fixes: 5370478d1c ("riscv: Add boot hartid to device tree")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2021-05-17 16:46:33 +08:00
Bin Meng
a6d7e8c914 riscv: Split SiFive CLINT support between SPL and U-Boot proper
At present there is only one Kconfig option CONFIG_SIFIVE_CLINT to
control the enabling of SiFive CLINT support in both SPL (M-mode)
and U-Boot proper (S-mode). So for a typical SPL config that the
SiFive CLINT driver is enabled in both SPL and U-Boot proper, that
means the S-mode U-Boot tries to access the memory-mapped CLINT
registers directly, instead of the normal 'rdtime' instruction.

This was not a problem before, as the hardware does not forbid the
access from S-mode. However this becomes an issue now with OpenSBI
commit 8b569803475e ("lib: utils/sys: Add CLINT memregion in the root domain")
that the SiFive CLINT register space is protected by PMP for M-mode
access only. U-Boot proper does not boot any more with the latest
OpenSBI, that access exceptions are fired forever from U-Boot when
trying to read the timer value via the SiFive CLINT driver in U-Boot.

To solve this, we need to split current SiFive CLINT support between
SPL and U-Boot proper, using 2 separate Kconfig options.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-05-17 16:42:24 +08:00
Bin Meng
2b039940f3 riscv: ax25-ae350: doc: Fix minor format issues
This fixes two minor format issues of the ax25-ae350 reST file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-17 16:42:05 +08:00
Tom Rini
7e1d0a8f17 Merge https://source.denx.de/u-boot/custodians/u-boot-usb 2021-05-16 18:06:26 -04:00
Kunihiko Hayashi
a5f9be1ed5 usb: dwc3-generic: Disable host driver definition if gadget only
Even if only USB gadget is defined, dwc3 generic driver enables
a definition and probe/remove functions for host driver.

This enables the definition if USB_HOST is enabled only.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-05-16 19:01:45 +02:00
Andre Przywara
1027f28bd4 usb: musb-new: Extend and move Allwinner quirk into Kconfig
All newer Allwinner SoCs (since about 2013) miss the CONFIGDATA register
in their MUSB implementation, so they need a quirk to hardcode this.

Currently this quirk depends on listing the SoCs affected in musb_reg.h,
which means that this list needs to grow with every new chip.

Move the quirk feature into Kconfig, next to PIO_ONLY, and change the
default to y (for Allwinner builds), while listing the early
implementations as exceptions.

This fixes USB peripheral operation on some newer SoCs, which were not
explicitly listed before.

Tested on H6, H616, R40 (which were broken before), and also on the H5
and A20, for regressions.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-05-16 19:01:45 +02:00
Konstantin Porotchkin
e1c55dfc7b arm: octeontx2: Add Octeon TX2 CN913x DB support
This patch adds the base support for the Marvell Octeon TX2 CN913x DB.
Only one defconfig is added with this patch. Other board variants are
available (NAND, MMC booting) and images for these boards can be
generated by following the documentation added in the included README.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-05-16 06:48:45 +02:00