Complete the transition away from xhci-dwc3 and dwc3-of-simple drivers
and change to use the dwc3-generic driver on remaining RK3328 and RK3399
boards.
MISC, USB_DWC3 and USB_DWC3_GENERIC is enabled on boards that used to
enable USB_XHCI_DWC3. USB_XHCI_DWC3 is dropped from updated boards along
with the default y of USB_XHCI_DWC3_OF_SIMPLE.
There is no intended change in functionality with this changes, USB 3.0
is expected to continue same as before this change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
What we were doing here amounts to simplifying the code for the new hush
parser, and the workarounds are required when using the old one. As we
have returned to having the old parser be default for now, we must undo
this so that the test passes again.
This reverts commit 6c2f753f4a.
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently at least two SoC families are able to cause a crash using
their regular boot scripts, with the new parser. For now, revert to the
old parser as default.
This reverts commit 78912cfde2.
Signed-off-by: Tom Rini <trini@konsulko.com>
In practice, as this test defaults to enabled rather than disabled, too
many platforms now fail.
This reverts commit d836473862.
Signed-off-by: Tom Rini <trini@konsulko.com>
With newer versions of trace-cmd the report subcommand will have
different output from before if we do or do not pass -l. However, with
the -l flag passed our put is consistent here. This updates our regular
expressions and comments for this as well now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Update packaging to be version 23.2 to match our Sphinx requirements.
This will let us build a pip cache out of both of our requirements.txt
files.
Signed-off-by: Tom Rini <trini@konsulko.com>
ACPI support for RISC-V requires a recent QEMU.
Upgrade the used QEMU to v8.2.0.
QEMU commit 0c7ffc977195 ("hw/net: cadence_gem: Fix MDIO_OP_xxx values")
is needed to fix the Ethernet PHY driver used by the emulated SiFive
Unleashed Board emulation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
xilinx:
- Enable NFS, WGET, DNS and BLKMAP by default
zynqmp:
- Support new power-management node
- Remove multiple blank lines from DTSes
- Wire multiboot with DFU infrastructure
- Fix i2c-gpio pinctrl group name
- SOM DT changes (phy on kd240, kv260 cleanups
- Cleanup i2c bus on zcu1285
- DT cleanup (fix node names not to use _)
- Fix USB interrupts
- Cleanup zcu100 DT
- Add support for kaslr-seed
zynqmp_r5:
- Fix W=1 issue with missing dir
tools:
- Improve zynqmpimage mkimage support
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZae/pAAKCRDKSWXLKUoM
IadKAJ9p4nP4Fy3DKfRJjpVoFE+7OR9ZUQCfYtWhN5eNKayfxcw9wnvuv/SggFU=
=95oH
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2024.04-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2024.04-rc1-v2
xilinx:
- Enable NFS, WGET, DNS and BLKMAP by default
zynqmp:
- Support new power-management node
- Remove multiple blank lines from DTSes
- Wire multiboot with DFU infrastructure
- Fix i2c-gpio pinctrl group name
- SOM DT changes (phy on kd240, kv260 cleanups
- Cleanup i2c bus on zcu1285
- DT cleanup (fix node names not to use _)
- Fix USB interrupts
- Cleanup zcu100 DT
- Add support for kaslr-seed
zynqmp_r5:
- Fix W=1 issue with missing dir
tools:
- Improve zynqmpimage mkimage support
* add generated index to table of contents
* create index entries for commands
* update Python packages used to build the documentation
* fix typos in dfu documentation
UEFI:
* split unrelated code from efi_bootmgr.c
* rename CONFIG_BOOTEFI_BOOTMGR to CONFIG_EFI_BOOTMGR
* net: tftp: remove explicit EFI configuration dependency
* fs: remove explicit EFI configuration dependency
Other:
* Add Goldfish RTC driver and make it available on RISC-V QEMU
-----BEGIN PGP SIGNATURE-----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=q+5u
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-04-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Documentation:
* add generated index to table of contents
* create index entries for commands
* update Python packages used to build the documentation
* fix typos in dfu documentation
UEFI:
* split unrelated code from efi_bootmgr.c
* rename CONFIG_BOOTEFI_BOOTMGR to CONFIG_EFI_BOOTMGR
* net: tftp: remove explicit EFI configuration dependency
* fs: remove explicit EFI configuration dependency
Other:
* Add Goldfish RTC driver and make it available on RISC-V QEMU
- Add more pytests to exercise functionality on real hardware, cleanup
and add tests around "cp"/memmove, add phyCORE-AM62x and Phytium
Pe2201 platforms, Nuvoton NPCM BMC reset driver and improve QEMU
SMBIOS support
The version of pycryptodomex that we use is vulnerable to this CVE.
While not likely an issue for us, let us upgrade to be on the safe side.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
Such a config option does not exist. Rephrase, and avoid mentioning
MEM_SUPPORT_64BIT_DATA, which is an implementation detail.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
The first sentence is half-way true; the macro is always defined, but
has the value 0 or 1.
The second is outright false. A lot of code guarded by
MEM_SUPPORT_64BIT_DATA uses a "ulong" to store values, so if
sizeof(long) is not 8, that code would probably compile, but not work
at all as expected.
It would probably be possible to make all such code explicitly use u64
and thus make it work on 32 bit targets, but until that is done, do
not pretend that it's ok to override the automatic value of
MEM_SUPPORT_64BIT_DATA.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
The macro MEM_SUPPORT_64BIT_DATA is always defined, as either 1 or 0,
so using "#ifdef MEM_SUPPORT_64BIT_DATA" doesn't do what one
expects.
This means that currently all 32 bit targets get compiled with the .q
suffix mentioned in the help text, while it doesn't actually work.
Use the proper "#if" instead.
There's really no point defining another similarly-named macro with
exactly the same value, so just use MEM_SUPPORT_64BIT_DATA throughout.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
QEMU's virt board provides an emulated Goldfish RTC. Enable the driver by
default.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The Goldfish RTC is a virtual device which may be supplied by QEMU.
It is enabled by default on QEMU's RISC-V virt machine.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Now it is clear that the feature actually depends on efi interfaces,
not "bootefi" command. efi_set_bootdev() will automatically be nullified
if necessary efi component is disabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Now it is clear that the feature actually depends on efi interfaces,
not "bootefi" command. efi_set_bootdev() will automatically be nullified
if necessary efi component is disabled.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
At this point, EFI boot manager interfaces is fully independent from
bootefi command. So just rename the configuration parameter.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some code moved from cmd/bootefi.c is actually necessary only for "bootefi
<addr>" command (starting an image manually loaded by a user using U-Boot
load commands or other methods (like JTAG debugger).
The code will never been opted out as unused code by a compiler which
doesn't know how EFI boot manager is implemented. So introduce a new
configuration, CONFIG_EFI_BINARY_EXEC, to enforce them opted out
explicitly.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Update requirements.txt to most current packages as produced by
python3 -m pip install six sphinx-rtd-theme sphinx-prompt
python3 -m pip freeze
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
We want to override the Sphinx theme only partially. So we need to
import the Sphinx theme.css. Cf.
https://docs.readthedocs.io/en/stable/guides/adding-custom-css.html
We also need to import the pygments.css for syntax highlighing.
Use sans-serif for body.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Newer versions of sphinx_rtd_theme require to add sphinx_rtd_theme to the
list of extensions. Cf.
https://github.com/readthedocs/readthedocs.org/pull/9654
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Sphinx 7.2+ is switching to using pathlib.Path
instead of str to represent paths. This fixes the
current deprecation warnings and eventual breakage.
This conversion will be a no-op when using older
Sphinx versions.
Signed-off-by: Oliver Faso <erer1243@gmail.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230910040811.53046-1-erer1243@gmail.com
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reword some sentences, add missing periods and fix various typos in the
dfu documentation.
This was originally contributed on [1]
[1] 9a21ed8ba7
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Enable CONFIG_OF_BOARD_SETUP, so we could use ft_board_setup()
to enable the kaslr-seed and pass to kernel.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240117032014.1014084-3-venkatesh.abbarapu@amd.com
Create a ft_board_setup() api that gets called as part
of bootm/booti before jumping to kernel. In this
ft_board_setup() callback that will inspect the DTB
and insert the device tree blob with the "kaslr-seed" property.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240117032014.1014084-2-venkatesh.abbarapu@amd.com
Just check that the length is at least 2. This allows passing strings
like ".b", which can be convenient when constructing
tests (i.e. parametrizing the suffix used).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
This function obviously does not and must not modify "arg". Change the
prototype to allow passing an argument of type "const char*" without
requiring a cast.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Now that the cp command is changed to use memmove() internally, update
the documentation to explicitly state that overlapping regions are
allowed.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
There's no 'mv' shell command for handling overlapping src and dst
regions, and there's no point introducing one, when we can just make
the existing 'cp' command DTRT in all cases. memmove() should at most
be a few instructions more then memcpy() (to detect the appropriate
direction to do the copy), which is of course completely in the noise
with all the string processing that a shell command does.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Add the following memory tests:
memtest_negative - To test mtest command by providing incorrect inputs
memtest_ddr - To test memory write-read-comparision for DDR memory
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add reset controller driver for Nuvoton BMCs.
The npcm reset driver not only supports reset each module reset
but setting initial value of reset Control Registers.
And The driver support each module reset.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Add below test cases for i2c commands:
i2c_bus - To show i2c bus info,
i2c_dev - To set or show the current bus,
i2c_probe - To probe the i2c device,
i2c_eeprom - To test i2c eeprom device,
i2c_probe_all_buses - To list down all the buses and probes it
Signed-off-by: Love Kumar <love.kumar@amd.com>
Add below test cases for mii commands:
mii_info -To display MII PHY info
mii_list - To list MII devices
mii_set_device - To set MII device
mii_read - To reads register from MII PHY address
mii_dump - To display data from MII PHY address
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add pe2201 platform code and the device tree of pe2201 platform board.
The initial support comprises the UART and PCIe.
Signed-off-by: TracyMg_Li <TracyMg_Li@outlook.com>
Changes since v1:
fix space corrupt.
Changes since v2:
switch to bootstd and text environment.
Changes since v3:
add environment variables.
next_header() and get_next_header() only differ in how the const attribute
is used. One function taking a const parameter and returning a non-const is
good enough.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
QEMU provides SMBIOS tables with detailed information. We should not try to
replicate them in U-Boot.
If we want to inform about U-Boot, we can add a Firmware Inventory
Information (type 45) table in future.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add support for J721E HS-SE 2.0 device. Make use of the existing
templates and override the phandles for sysfw.itb so that builds do not
fail.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Add below test cases for mdio commands:
mdio_list - To list MDIO buses
mdio_read - To read PHY's register at <devad>.<reg>
mdio_write - To write PHY's register at <devad>.<reg>
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Abort the dhcp request in the middle by pressing ctrl + c on u-boot
prompt and validate the abort status.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Qualcomm architecture changes:
* Move clock and pinctrl drivers out of mach-snapdragon
* Various clock driver improvements
* Convert PMIC power/reset key driver to use the button API
* Preparetory work for migrating to upstream DT
